johnsonevinrudefuelsystemcomponents
TRANSCRIPT
CARbURETOR KITS AnD COMPOnEnTS
Replaces:437327
1300-08688
For V4 & V6 90 deg. Loopers 1988-01.Replaces:396701
1300-01432
For 20 hp 1969-70, 18, 20, 25HP 1969-up, 28, 30, 35HP 1976-up, 40 comm. 1979-up, 40, 45, 48, 50, 55hp 1971-up, 55HP 1968-69, 60 hp 1970-71, 60 2 Cyl 1980-85, 50 to 70 3 cyl 1972-up, 75 hp 1975-88.
Replaces:398453
1300-01427
For 9.9 1974-1988 and 15HP 1974-1988Our Kit includes the Float!
Carburetor KIt Carburetor KIt Carburetor KIt
Replaces:398532
1300-01892
For 1.5, 2, Junior, Colt 1970-1990, 4HP 1968-78. Our Kit includes the Float!
Replaces:438996
1300-08689
For 90-115 hp 60 Deg. Loopers 1995-up, 150-175 Loopers 1991-Up.
Replaces:439070
1300-08645
For Ultra, Excel 4+2.5 1987-1990, 3HP 1989-up, 4BR 1981-83, 4.5 w/ internal tank 1980-1983.
Carburetor KIt Carburetor KIt Carburetor KIt
Replaces:439074
1300-01893
For 28HP 1962-1964; 33HP 1965-1970; 35HP 1959; 40HP manual & electric 1960-1963; 40HP 1971.
Replaces:439075
1300-01894
For 40HP 1964-1970, 40HP 1972-1978.Our Kit includes the Float!
Replaces:439076
1300-01895Carburetor KIt Carburetor KIt Carburetor KIt
Replaces:439071
1300-08647
For 3HP 1952-1967, 4HP 1965-67, 5HP 1965-67, 5.5-6HP 1954-67, 6HP 1969-79, 7.5HP 1956-58, 10HP 1954-63, 15HP 1956, 18-20HP 1957-68
Replaces:439072
1300-08646
For 4BRH, R Deluxe 1984-Up, 4HP 1979-804.5 w/ aux. Tank 1980-3, 6-7.5-8HP 1980-85.
Replaces:439073
1300-08691
For 6-8HP 1986-Up; 9.9HP 1989-Up; 15HP1989-Up, 20HP .991-Up
Carburetor KIt Carburetor KIt Carburetor KIt
280
Johnson/Evinrude™
Specifications subject to change without notice. www.EngineeredMarineProducts.com
Ignition Com
ponentsElectrical
Com
ponentsFuel / C
arbCom
ponentsCooling
Com
ponentsTransom
& D
riveCom
ponentsG
earcaseCom
ponentsTilt &
TrimCom
ponents
CARbURETOR KITS AnD COMPOnEnTS
Replaces:382048
1300-08690
Replaces:439078
1300-02364
Premium Viton Gaskets.Replaces:439079
1300-02362
Premium Viton Gaskets.
Carburetor KIt Carburetor KIt Carburetor KIt
Replaces: none
Replaces:315232
1300-36020
1399-13486
Expanded coverage!! Crosses to both 439079 & 439078.
PACK OF 5.
Replaces:396520
Replaces:382363
1300-01410
1300-36063
Premium, U.S.A. Alcohol-resistant.Replaces:396521
Replaces:391508
1300-01411
1300-13100
Premium, U.S.A. Alcohol-resistant.
Carburetor KIt
adjustIng needle retaIner
needle & seat
float
needle & seat
float
Our carburetor kits are produced with the highest grade alcohol-resistant Viton gaskets and Viton-tipped needles. considering the amount of dealer effort it takes to service a carburetor, we know it’s not worth visiting the job a second time.
Quality Matters™
281
Johnson/Evinrude™
Specifications subject to change without notice.www.EngineeredMarineProducts.com
Igni
tion
Com
pone
nts
Elec
tric
alCom
pone
nts
Fuel
/ C
arb
Com
pone
nts
Coo
ling
Com
pone
nts
Tran
som
& D
rive
Com
pone
nts
Gea
rcas
eCom
pone
nts
Tilt &
Trim
Com
pone
nts
fUEl PUMPS, KITS AnD RElATED COMPOnEnTS
Replaces:438562
1399-07351
Block mount pulse. For 9.9, 15hp.
fuel puMp
Replaces:397839
1399-07350
For 6, 8, 9.9, 15HP thru 1992.
fuel puMp
Replaces:438555
1399-07353
External pulse line-20, 30, 40,50hp 1990-2000.
fuel puMp
Replaces:393103
1399-01434
Kit for 438562.
fuel puMp KIt
Replaces:438616
1399-08603
For 9.9, 15 ELE 1990-up, 20, 30HP 1990-up, 40, 45, 48, 50, 88, 100, 125 HP 1990-up.
fuel puMp KIt
Replaces:398514
1399-01641
Kit for 438555.
fuel puMp KIt
Replaces:436194
1300-36194
For front of 200-225 FICHT & carb (90 deg 1993+).
CheCK valve
Replaces:317739
93-02784
For V4 Cross 1985-96 & V6Cross 1985-95.
leaf valve
Replaces:438556
1399-07352
Non VRO Block Mount Pulse.For 25-55HP & V4 1976-78.
fuel puMp
Replaces:393088
1399-01604
Kit for 397839.
fuel puMp KIt
Replaces:392988
1300-92988CheCK valve
Replaces:313420
93-02783
For 3 cyl 1985-1995.
leaf valve
Replaces:432962
1399-01642
Kit for 438556.
fuel puMp KIt
Replaces:436385
1300-36385
For front of 200-225 FICHT & carb engines (90° 1993-up)
CheCK valve
Replaces:335334
93-13508CheCK valve
282
Johnson/Evinrude™
Specifications subject to change without notice. www.EngineeredMarineProducts.com
Ignition Com
ponentsElectrical
Com
ponentsFuel / C
arbCom
ponentsCooling
Com
ponentsTransom
& D
riveCom
ponentsG
earcaseCom
ponentsTilt &
TrimCom
ponents
fUEl PUMPS, KITS AnD RElATED COMPOnEnTS
Horsepower Year EMP # OEM #
2.5 1987-88 1399-01604 393088
4 1981-Up 1399-01604 393088
4.0 Deluxe 1992-93 1399-01604 393088
4.5 1982-87 1399-01604 393088
5 1985-93 1399-01604 393088
6 1986-93 1399-01604 393088
6.5 1989-90 1399-01604 393088
7.5 1982-83 1399-01604 393088
8 1984-93 1399-01604 393088
9/9/1915 1981 1399-01434 393103
9/9/1915 1982-Up 1399-01604 393088
9.9 Electric & 15 1987-89 1399-01641 398514
9.9 Electric & 15 1990-Up 1399-08603 438616
10/14 1989-90 1399-01604 393088
14 1988 1399-01604 393088
20/25 1977-86 1399-01434 393103
20 Thru 30 1990-Up 1399-08603 438616
20/25/30 1987 1399-01641 398514
20/25/30 1988-89 1399-01642 432962
20/25/30 Rope 1990 1399-01642 (A) 432962
20/30/35 Remote 1990 1399-01642 (A) 432962
20/35 Rope 1989 1399-01642 432962
25 Comm 1982 1399-01434 393103
25 Comm 1988-90 1399-01642 432962
28 1962-63 - -
28 1987 1399-01641 398514
30/35 1976-86 1399-01434 393103
35 1958-59 - -
40 1960-64 - -
40 1987 1399-01641 398514
40 1990-Up 1399-08603 438616
40 B 1970-78 1399-01434 393103
40/50 1988-89 1399-01642 432962
45 1958-59 - -
45/48/50 (B)(C) 1989 1399-01642 432962
45/48/50 (B)(C) 1990-up 1399-08603 438616
45/55 1985-86 1399-01641 398514
45/55 1987 1399-01641 398514
45/55 Comm 1989-90 1399-01641 (A) 398514
48 1987 1399-01641 398514
Horsepower Year EMP # OEM #
48 1988 1399-01642 432962
48/50 1990 1399-01642 (A) 432962
50 1958-59 - -
50 1987 1399-01641 398514
50/60 1982-84 1399-01434 393103
55 1983 1399-01434 393103
55 Comm 1984 1399-01434 393103
55 Thru 75 1970-78 1399-01434 393103
60 1964-67 - -
60 1988 1399-01641 398514
65 1985-87 1399-01434 393103
65 1990 1399-01641 (A) 398514
65 Comm 1984 1399-01434 393103
65 Comm 1988-89 1399-01641 398514
70/75 1982-84 1399-01434 393103
70 1990 1399-01641 398514
75 1960-65 - -
80 1966-67 - -
85 1978-83 1399-01434 393103
88 1987 1399-01641 398514
88/90/110 1988-89 1399-01641 398514
88/90/100/115 1990 1399-01641 (A) 398514
88/100/125 1990-Up 1399-08603 438616
90 1964-65 - -
90/115 1978-83 1399-01434 393103
90/115/140 1982 1399-01434 393103
100 1966 - -
100 Comm 1989-90 1399-01641 398514
125 Comm 1989-90 1399-01641 398514
V4 140 1978-83 1399-01434 393103
150/175/200 1982 1399-01434 393103
V6 150/1 75 1983 1399-01434 393103
155 Comm 1989-90 1399-01641 398514
V6 235 1983 1399-01434 393103
2.6 1984 1399-01641 398514
3.0 1991-93 1399-01604 393088
(A) Early production pump
(B) Two stroke
(C) Not VRO (Variable Ratio Oiling)
283
Johnson/Evinrude™
Specifications subject to change without notice.www.EngineeredMarineProducts.com
Igni
tion
Com
pone
nts
Elec
tric
alCom
pone
nts
Fuel
/ C
arb
Com
pone
nts
Coo
ling
Com
pone
nts
Tran
som
& D
rive
Com
pone
nts
Gea
rcas
eCom
pone
nts
Tilt &
Trim
Com
pone
nts
fUEl PUMP & CARbURETOR GASKETS AnD COMPOnEnTS
Replaces:303615
27-00759
Fuel pump to block.
fuel puMp gasKet
Replaces:338876
27-00916
For filter cap to pump.Made with fuel resistant Vitonrubber.
fuel puMp gasKet
Replaces:338879
27-00989
For filter cap to pump.Made with fuel resistant Vitonrubber.
fuel puMp gasKet
Replaces:307583
1399-01433
PACK OF 5.
Carb valve paCKIng
Replaces:328650
25-02360
Replaces:332253
25-02355
V4 & V6 Looper.Replaces:338813
27-02361
V4 & V6 Looper.
Carburetor body seal Carburetor body seal float bowl gasKet
Replaces:341258
27-27122
V4/V6 Looper.
Carburetor gasKet
Replaces:341284
27-27120
V4/V6 Looper.
Carburetor gasKet
Replaces:341287
27-27121
V4/V6 Looper.
Carburetor gasKet
Replaces:343512
27-02585
PACK OF 5.
Carburetor gasKet
Replaces:338880
27-00993
Replaces:338880 + 343512
27-27241
Contains one each: 27-00993 and 27-02585.
Replaces:338884
27-00995
V4 & V6 Crossflow.
float bowl gasKet float and nozzle gasKet KIt float bowl gasKet
284
Johnson/Evinrude™
Specifications subject to change without notice. www.EngineeredMarineProducts.com
Ignition Com
ponentsElectrical
Com
ponentsFuel / C
arbCom
ponentsCooling
Com
ponentsTransom
& D
riveCom
ponentsG
earcaseCom
ponentsTilt &
TrimCom
ponents
WATER SEPARATInG fUEl fIlTER HEADS AnD PlUGS
WATER SEPARATInG fUEl fIlTER CAnISTERS AnD KITS
Replaces: none
35-06040
Can measures 4.35” tall. Pipe inlet is 1” to allow maximum fuel flow. 10 micron filtra-tion for fuel injected engines.
Replaces:502905
35-36421
Can measures 4.35” tall. Pipe inlet is 1” to allow maximum fuel flow. 21 micron filtra-tion for fuel injected engines.
Replaces:502905
35-36621
Can measures 6” tall. Pipe inlet is 1” to allow maximum fuel flow. 21 micron filtra-tion for fuel injected engines.
water separatIng fuel fIlter water separatIng fuel fIlter water separatIng fuel fIlter
ALL FILTER CANISTERS ARE EPOXY COATED FOR MAXIMUM PROTECTION
Replaces:174176
35-06050
This head is designed with an extra large 1" nipple for greater fuel flow. Inlets/outlets mea-sure 1/4". With brass plugs.
hIgh CapaCIty fIlter head
Replaces: none
35-06053
Get maximum fuel flow with 3/8" inlets/outlets. Also designed with extra large 1" nipple and brass plugs.
hIgh CapaCIty fIlter head
Replaces:
22-06055
For the EMP™ 35-06050 filter head. 1/4" with Vibraseal patch.
brass plugs
Replaces:
22-22038
For the EMP™ 35-06053 filter head. 3/8"-18 NPTF with Vi-braseal patch.
brass plugs
A micron is a unit of linear measure. It is used just as a centimeter, inch, or foot would be. A micron rating is used for a fluid filter as a generalized way of indicating the ability if the filter to remove contaminants by the size of the particles.
As always, SealTech is leading the way with quality. Since 2005 we have offered oil filters with a 20 micron rating and Water/Fuel Separating Filters with a 10 micron rating.
40 Micron
20 Micron10 Micron5 M
1 Micron = 1 Millionth of a Meter1 Micron = 1 Thousandth of a Millimeter40 Microns = Visible with Magnification
Understanding Micron Ratings
Replaces:502906
35-06051
Replacement filter for PN 987169 fuel filter-water separator kit used on 1991 and newer 3.0L models & 1992 5.0 & 5.8L Fords. And electric fuel pump filter 4.3, 7.4, & 8.2L 1992-93.
water separatIng fuel fIlter
285
Johnson/Evinrude™
Specifications subject to change without notice.www.EngineeredMarineProducts.com
Igni
tion
Com
pone
nts
Elec
tric
alCom
pone
nts
Fuel
/ C
arb
Com
pone
nts
Coo
ling
Com
pone
nts
Tran
som
& D
rive
Com
pone
nts
Gea
rcas
eCom
pone
nts
Tilt &
Trim
Com
pone
nts
WATER SEPARATInG fUEl fIlTER CAnISTERS AnD KITS
REfEREnCE CHART fOR EMP™ fIlTERS
With changes in the marine industry, such as new high performance fuel injected engines and the increased use of new alternative fuels, eMP Filters have become the new standard when it comes to proper filtration and high performance filters. Our high quality filters can help prevent re-strictions that cause poor performance and can lead to complete engine failure. eMP offers a line of filters that come with different micron ratings to better fit your particular application. So whether it’s a 25 horsepower carbureted engine or a 350 horsepower fuel injected engine you can remain confident knowing that eMP filters are preventing contaminants from damaging your engine.
***Please note that not all engines require the same micron rating. Varying amounts of ethanol may have adverse effects on engines in different areas. consult your manual or certified technician for proper applications***
Quality Matters™
Replaces:174176
35-35621
Can: 6” Tall (EMP™ PN 35-36621) and ✔
1” pipe for greater flow.Max capacity head: 1/4” inlets/outlets. ✔
21 Micron filtration. ✔
Includes brass plugs. (EMP™ PN ✔
22-06055)
Replaces:174176
35-38421
Can: 4.35” Tall (EMP™ PN 35-36421) ✔
and 1” pipe for greater flow.Max capacity head: 3/8” inlets/outlets. ✔
21 Micron filtration. ✔
Includes brass plugs. (EMP™ PN ✔
22-22038)
Replaces:174176
35-38621
Can: 6” Tall (EMP™ PN 35-36621) and ✔
1” pipe for greater flow.Max capacity head: 3/8” inlets/outlets. ✔
21 Micron filtration. ✔
Includes brass plugs. (EMP™ PN ✔
22-22038)
water separatIng fuel fIlter KItwater separatIng fuel fIlter KIt water separatIng fuel fIlter KIt
FILTER HEAD
35 -06050 (MC 89876A 3) 1/4” inlets/outlets and 1” pipe Uses 22-06055 brass plugs.
35 -06053 (MC 89876A 3)
3/8” inlets/outlets and 1” pipe Uses 22-22038 brass plugs.
CA
NIS
TER
W
ITH
1”
PIP
E
35-36310 (MC 802893Q01) 3.875” tall / 10 micron
35-14310 (MC 35-802893Q 4)
35-36321 (MC 802893Q01) 3.875” tall / 21 micron 35-14321 (UNV)
35-36410 (MC 802426Q) OLD# 35-06040
4.35” tall / 10 micron
35-14410 (MC 35-802893Q 4)
OLD# 35-06030
35-38410 (MC 35-802893Q 4)
35-36421 (OMC™ 502905) 4.35” tall / 21 micron
35-14421 (OMC™ 174176 & MC 35-802893Q 4) 35-38421 (OMC™ 174176)
35-36610 (UNV) 6” tall / 10 micron
35-35610 (YM MAR-SEPAR-AT-OR)
35-38610 (YM MAR-SEPAR-AT-OR)
35-36621 (OMC™ 502905) 6” tall / 21 micron
35-35621 (OMC™ 174176 & YM ABB-SEPAR-AT-OR)) 35-38621 (OMC™ 174176)
286
Johnson/Evinrude™
Specifications subject to change without notice. www.EngineeredMarineProducts.com
Ignition Com
ponentsElectrical
Com
ponentsFuel / C
arbCom
ponentsCooling
Com
ponentsTransom
& D
riveCom
ponentsG
earcaseCom
ponentsTilt &
TrimCom
ponents
OIl fIlTERS
Replaces:835440
Replaces:502902 / 173232
35-06003
35-06006
Short canister model for GM™ apps. Short version of the EMP 35-06006. 13/16 x 16 NPT for GM™ 4 cyl, 6 cyl inline & 8 cyl.
Long canister filter for 4, 6 cyl inline GM™ engines.
Replaces:502903 / 173834
Replaces:502900 / 173231
35-06004
35-06007
For V6 GM™ applications.
Long canister oil filter for Ford™ applica-tions, including 2.3L.
Replaces:502901 / 173233
Replaces: 502904 / 174796
35-06005
35-06014
Long canister filter for GM™ V8 engines.
Specially designed filter for 7.5L 460 Ford™ applications.
oIl fIlter
oIl fIlter
oIl fIlter
oIl fIlter
oIl fIlter
oIl fIlter
EMP™ Filters are specifically designed for the rugged marine environment and meet or exceed Original Equipment Manufacturer’s specifications. Special fea-tures, such as heavier steel and rolled seams, help make this one of the best filters on the market. Anti drain back valves are included where required.
35-06003, 35-06005 & 35-06006 can be used for the same application depending on clearance.
Theprofilesareasfollows:35-06003(3.7”),35-06005(5.22”)&35-06006(4.3”).
Introducing a new brand of Marine Partswhere QUALITY is the top priority.
Over 2500 parts available.Catalogs and marketing materials available.
OEM quality parts at affordable prices.
Backed by 30 years of experience.
287
Johnson/Evinrude™
Specifications subject to change without notice.www.EngineeredMarineProducts.com
Igni
tion
Com
pone
nts
Elec
tric
alCom
pone
nts
Fuel
/ C
arb
Com
pone
nts
Coo
ling
Com
pone
nts
Tran
som
& D
rive
Com
pone
nts
Gea
rcas
eCom
pone
nts
Tilt &
Trim
Com
pone
nts
fUEl lInE COMPOnEnTS
EMP™ Primer Bulbs feature:Uv, alcohol & ozone resistant material. •Double check valves with Stainless Steel Springs & viton Balls.•Stainless Steel Clamps & easy to install Snapper Clamps.•
Replaces:775638 / 174511
32-03880
5/16” inlets and outlets.
preMIuM prIMer bulb asseMbly
Replaces:775639
32-03881
3/8” inlets and outlets.
preMIuM prIMer bulb asseMbly
Replaces: 174177
22-00874
3/8” NPT x 3/8” Barb
90° elbow
Replaces: none
22-01872
1/4” NPT x 3/8” Barb
90° elbow
Replaces: none
22-08099
1/4” x 1/4” NPT
fuel tanK elbow
Replaces: none
22-08100
1/8” x 1/4” NPT w/ Hex
reduCtIon nIpple
Replaces: none
22-08101
1/8” x 1/4” NPT
90° elbow
Replaces: none
22-08102
1/4” x 1/4” NPT
90° elbow
Replaces:322653
54-01368
Range: .344-.406Hose Size: 2
snapper ClaMp
Replaces:124249
54-01369
Range: .406-.468Hose Size: 4
snapper ClaMp
Replaces:322654
54-01370
Range: .468-.531Hose Size: 6
snapper ClaMp
Replaces:322652
54-01371
Range: .531-.593Hose Size: 8
snapper ClaMp
Replaces:911616
54-01372
Range: .593-.656Hose Size: 10
snapper ClaMp
Replaces:329654
54-01373
Range: .762-.812Hose Size: 12
snapper ClaMp
Replaces:329653
54-01374
Range: .750-.875Hose Size: 14
snapper ClaMp
Replaces: none
22-00846
Thread: 1/8“ NPTHose Size: 1/4“
Male hose barb
Replaces: none
22-00845
Thread: 1/8“ NPTHose Size: 5/16“
Male hose barb
Replaces: none
22-00847
Thread: 1/8“ NPTHose Size: 3/8“
Male hose barb
Replaces: none
22-00842
Thread: 1/4“ NPTHose Size: 1/4“
Male hose barb
Replaces:173311
22-00844
Thread: 1/4“ NPTHose Size: 5/16“
Male hose barb
Replaces:173312
22-00843
Thread: 1/4“ NPTHose Size: 3/8“
Male hose barb
Replaces: none
22-08103
Thread: 3/8“ NPTHose Size: 3/8“
Male hose barb
288
Johnson/Evinrude™
Specifications subject to change without notice. www.EngineeredMarineProducts.com
Ignition Com
ponentsElectrical
Com
ponentsFuel / C
arbCom
ponentsCooling
Com
ponentsTransom
& D
riveCom
ponentsG
earcaseCom
ponentsTilt &
TrimCom
ponents