john deere catalog...john deere catalog parts, equipment, supplies, and more harvest 2020 12-month...

John Deere CatalogParts, Equipment, Supplies, and More

Harvest 2020

12-MONTH WARRANTYon dealer-installed O.E.M. ag parts

See back cover for details.

Pages 13–14

Sectionalized Cutterbar Knife Kits

15% Off Genuine John Deere STS and S-series separator tine kits. Available instandard and high-wear options.

Page 25

Separator Tines

Buy a 200 count bucket of Shop Towels (DRC4221) and get a 200 count bucket refill (DRC4222) for FREE! (A $12.25 value)Limit 2 per customer. Not valid with other offers.

03

Shop Towels

15% off Genuine John Deere Litening Bolt™ sectionalized knife kits for 600/700/900 series platforms. These kits offer easy transport and quick change-out.

LAMOURE, ND200 6TH ST SW

(701) 883-5271

MILNOR, ND520 MAIN ST

(701) 427-5224

ELLENDALE, ND209 11TH ST N

(701) 349-5336

ASHLEY, ND9589 49TH AVE SE

(701) 288-3471

NAPOLEON, ND904 N BROADWAY(701) 754-2256

BRITTON, SD42168 SD HWY 10(605) 448-5918

GREENIRONEQUIPMENT.COM | TEXT GREEN IRON TO 31996

JohnDeere.com

Don takes pride in getting his hands dirty.Like the farmers he serves, Don understands the meaning of a hard day’s work. So do the experts at your John Deere dealer who can get you field ready with offseason planter and tractor inspections.

You can count on the best-trained technicians in the industry to test your meters and replace worn planter components to ensure correct population and accurate spacing for uniform emergence. And when it comes to your tractor, we’ll identify and replace failing parts to prevent disastrous downtime in the narrow planting window – all while staying within your budget with Genuine John Deere, Reman and A&I parts. Plus, Genuine John Deere ag parts now carry a 12-month warranty including labor.*

Schedule your offseason planter and tractor inspections today at your local John Deere dealer with an expert like Don.

*12 month/unlimited hour warranty on new agricultural parts installed by an authorized John Deere Dealer. See John Deere Service Repair & Parts Warranty for details at JohnDeere.com/PartsWarranty.

Benefits To You:• Exclusive money-saving finance offers for seed

• Could save thousands of dollars of interest expense and lower your cost per acre

• Get great offers from local retailers and established national suppliers

PARTS ARE JUST PART OF THE PICTURE.No matter what kind of operation you run, you don’t have time for downtime. Whether you need to buy parts for regular service maintenance or have your equipment inspected during the off-season, you can put it all on one account. Ask your local John Deere Dealer about the exclusive money saving No-Payments/No-Interest programs available when using your Multi-Use Account from John Deere Financial.

Multi-Use Accounts are a service of John Deere Financial, f.s.bCR0315748 Litho in U.S.A. (18-11)

CROP INPUTS FARM SUPPLIESPARTS, SERVICE & ATTACHMENTS

PICK 3 N’ SAVEAchieve a cleaner cut

with knife sections that feature austempering heat treatment

for greater strength and balanced wear.

Experience smoother crop feeding with durable draper belts.

KNIFE SECTIONS

DRAPER BELTS

Improve residue distribution and fuel economy with wear-resistant,

extended-life chopper knives.

CHOPPER KNIVES

Maximize cutterbar performance and ground speed with knife

guards. Choose from induction hardened, case hardened or boron

hardened for longer wear life.

Minimize grain damage with augers engineered to retain

flighting thickness and radius over time. Regular and high-wear

options are available.

KNIFE GUARDS

AUGERS

15% OFF* COMBINE PARTS THRU 8/28/20

Gear up for the harvest ahead by replacing worn parts on your combine. And right now you can save a bundle, with a bundle, on Genuine John Deere parts. Simply PICK 3 or more categories above. PURCHASE $150 minimum of parts in each category. SAVE 15% on all parts in your selected categories. Now that’s easy pickings. And savings, too. Contact your Dealer today! *Save 15% on Genuine John Deere combine parts when you purchase a minimum of $150 in at least 3 of the 5 combine parts categories (knife sections, knife guards, chopper knives, draper belts, augers) from an authorized U.S. John Deere dealer between May 1, 2020 and August 28, 2020. $150 minimum is before applicable sales tax and must be spent in at least 3 categories to receive 15% OFF in each selected category. Offer not valid on previously purchased parts or attachments nor on attachment ordered as an option code. Offer has no cash value and cannot be redeemed for cash. Dealer participation may vary. Other restrictions may apply. Offer cannot be combined with any other offer and may be discontinued or modified without notice at any time. See your John Deere dealer for details.

5JDParts.JohnDeere.com

To change your address, send your old address label along with your new address to:

John Deerec/o Customer MailP.O. Box 417Moline, IL 61266-0417

Prices are suggested retail prices only and are subject to change without notice at any time. Dealer may sell for less. Taxes, setup, delivery, freight, and preparation charges not included. See dealer for details.

**Manufacturer’s limited warranty. Limitations apply and vary by model. See manufacturer for details.

††The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less.

*Trademark is third party used with permission.

John Deere, the leaping deer symbol and John Deere’s green and yellow trade dress are the trademarks of Deere & Company.

US

John Deere doesn’t just stop at parts…we’ve got you covered!Whether you’re out in the field, hard at work in the shop, or hanging out in the house, you can count on the John Deere team to keep you stocked, locked, and ready, all year long.

From our friendly dealerships to our comprehensive catalogs, you’ll find a complete lineup of quality gear. We carry everything you need from maintenance products to equipment attachments, clothing, tools, toys, and more.

So if you’re preparing for next season or just looking for a unique gift idea, remember the John Deere team. We’re here to help you get the job done right.

CONTENTSCombine Parts & Attachments ............................. 6–34Precision Ag ............................................................ 35Tractor Parts & Attachments ............................. 36–47Engine & Reman Parts ....................................... 48–49Hay & Forage Parts & Attachments .................... 50–52Rotary Cutter Parts & Attachments .......................... 53Bearings ................................................................. 54Cotton Picker Parts & Attachments .................. Cot 1–8Forage Harvester Parts & Attachments ............. FH 1–8Tillage Parts ...................................................... 55–60Air Seeder & Drill Parts .......................................61–66Sprayer Parts & Attachments .............................. 67–71Hoses & Hydraulic Parts .....................................72–73Filters ................................................................74–75Oil & Lubricants ................................................ 76–80Batteries & Chargers ..........................................81–84Accessories ....................................................... 85–86Turf & Utility Vehicle Parts & Attachments .............87–94Sunbelt Outdoor Products ....................................... 95Chemicals & Paint ...............................................97–98Home & Workshop Products .............................99–103GreenFleet ..................................................... 104–105 Safes .....................................................................106

9070STScombine_filters_links.pdf 1 1/16/18 9:24 AM

RECIRCULATION AIR FILTERH220870Clean or replace every200 hours, and as required.

HEAVY-DUTY CAB AIR FILTERAH168783Clean or replace every 200 hours, and as required.

ENGINE FUEL FILTERSRE541922 (9570)RE522878 (9570)RE525523 Filter Kit (9670 & 9770)RE532952 (Primary 9870)RE533910 (Secondary 9870)Replace fuel filters every 500 hours.

PRODRIVE™ FILTER (if equipped)AH128449 (9770–9870)Replace after first 100 hours, then every 400 hours.

ENGINE, AIR, PRIMARYAH222225Change annually and clean or change as required.

ENGINE OIL FILTERRE504836 (9570)RE509672 (9670 & 9770)RE572785 (9870)Replace after 100 hours and then every 250 hours. Fill Crankcase with seasonal viscosity grade oil or Torq-Gard™ Supreme (250 hours change interval). If using Plus-50™ oil and a John Deere filter, the service interval can be extended by 50 percent.Example: 250 hours extends to 375 hours.

HYDROSTATIC CHARGE FILTER (ProDrive™ Only)AN207368 (9770 & 9870)Replace every 400 hours.

CHARGE PUMP/MAINHydraulic/Main Engine Gear Case Filter AH128449Filter change interval for all three filters is 400 hours.

CABAir FilterAH115833Clean or replace every 200 hours, and as required.

ENGINE, AIR SECONDARYAH212295Change Secondary filter only with Primary filter. Change annually, or as required with Primary Air Filter.

9070 Series STS Combines 9570 STS, 9670 STS, 9770 STS, 9870 STSFilter Overview with Service Intervals

Visit www.JohnDeere.com/FilterOverviews to find the filter guide for your model.

6

9070STScombine_filters_links.pdf 1 1/16/18 9:24 AM

RECIRCULATION AIR FILTERH220870Clean or replace every200 hours, and as required.

HEAVY-DUTY CAB AIR FILTERAH168783Clean or replace every 200 hours, and as required.

ENGINE FUEL FILTERSRE541922 (9570)RE522878 (9570)RE525523 Filter Kit (9670 & 9770)RE532952 (Primary 9870)RE533910 (Secondary 9870)Replace fuel filters every 500 hours.

PRODRIVE™ FILTER (if equipped)AH128449 (9770–9870)Replace after first 100 hours, then every 400 hours.

ENGINE, AIR, PRIMARYAH222225Change annually and clean or change as required.

ENGINE OIL FILTERRE504836 (9570)RE509672 (9670 & 9770)RE572785 (9870)Replace after 100 hours and then every 250 hours. Fill Crankcase with seasonal viscosity grade oil or Torq-Gard™ Supreme (250 hours change interval). If using Plus-50™ oil and a John Deere filter, the service interval can be extended by 50 percent.Example: 250 hours extends to 375 hours.

HYDROSTATIC CHARGE FILTER (ProDrive™ Only)AN207368 (9770 & 9870)Replace every 400 hours.

CHARGE PUMP/MAINHydraulic/Main Engine Gear Case Filter AH128449Filter change interval for all three filters is 400 hours.

CABAir FilterAH115833Clean or replace every 200 hours, and as required.

ENGINE, AIR SECONDARYAH212295Change Secondary filter only with Primary filter. Change annually, or as required with Primary Air Filter.

9070 Series STS Combines 9570 STS, 9670 STS, 9770 STS, 9870 STSFilter Overview with Service Intervals

7

Corn Head Parts

Features of Genuine John Deere Chains:■ The face of each flight is extended down to create a lip between sidebars—

this prevents debris from collecting at the roller and reduces wear on the chain and sprockets

■ The flight face slants at a 15-degree angle away from roller chains to create a self-cleaning effect as the flight moves ears towards the auger

■ Chains are coated with a rust-preventative chain lubricant

Gathering Chains

NUMBER DESCRIPTION TYPE LIST NOW

40 and 90 Series

AN102009 Black Pin Gathering Chain John Deere $ 58.25 $53.59

A-AN102009 Black Pin Gathering Chain A&I Products $ 39.88

600 Series (MY08–11) (-745100)

AH208978 Chrome Pin Gathering Chain John Deere $ 83.61 $76.92

A-AH208978 Chrome Pin Gathering Chain A&I Products $ 62.81

600 Series (MY12–17) (745100-)

AXE61091 Chrome Pin Gathering Chain John Deere $101.36 $93.25

A-AXE61091 Chrome Pin Gathering Chain A&I Products $ 81.25

Gathering chain sprockets need to be inspected and replaced as needed. It is a good practice to replace the sprockets when replacing the gathering chains. Corn heads have an upper drive sprocket and lower idler sprocket.

Gathering Chain Sprockets


40 Series

H85252 Upper Drive Sprocket John Deere $21.84 $20.09

A-H85252 Upper Drive Sprocket A&I Products $15.19

AN102448 Lower Idler Sprocket (-466449) John Deere $16.76 $15.42

AH101219 Lower Idler Sprocket (466450-) John Deere $18.12 $16.67

A-AH101219 Lower Idler Sprocket (466450-) A&I Products $13.78

90 Series



AH101219 Lower Idler Sprocket John Deere $18.12 $16.67

A-AH101219 Lower Idler Sprocket A&I Products $13.78

600 Series (MY08–11) (-745100)



AH231386 Lower Idler Sprocket John Deere $50.04 $46.04

A-AH231386 Lower Idler Sprocket A&I Products $38.34

600 Series (MY12–17) (745100-)

AXE36872 Upper Drive Sprocket John Deere $55.52 $51.08

A-AXE36872 Upper Drive Sprocket A&I Products $43.25

AXE63766 Lower Idler Sprocket John Deere $44.09 $40.56

A-AXE18770 Lower Idler Sprocket A&I Products $32.03

8

*Also order KXE10528 metal guide kit to complete installation.

NUMBER DESCRIPTION LIST NOW

KXE10487 RowMax Kit $468.48 $418.48

HXE110671 LH Opposed Stalk Roll $503.78 $453.78

HXE110672 RH Opposed Stalk Roll $503.78 $453.78

HXE110675 LH Intermeshing Stalk Roll $525.90 $475.90

HXE110676 RH Intermeshing Stalk Roll $525.90 $475.90

HXE141569 LH Chopping Stalk Roll $729.51 $679.51

HXE141570 RH Chopping Stalk Roll $729.51 $679.51

Trigger a chain reactionMake your corn head stronger—and last longer—with RowMax, a new retrofit solution from John Deere.

Designed exclusively for the 700C/FC corn heads and available as a retrofit for MY12-17 600C/FC corn heads, RowMax boosts row unit life by up to 50% with an advanced gathering chain featuring 12 additional links, two more sprocket teeth, and upgraded solid alloy bushings. In addition, if you replace your worn stalk rolls with opposed or intermeshing stalk rolls, you’ll get 25% more wear life thanks to an improved wear coating.

Cover more acres—and lower lifetime ownership cost—by upgrading your cornhead with an innovative, RowMax retrofit kit from John Deere.

9

Chopping Stalk Roll Blossom

John Deere’s innovative lineup of stalks rolls is now better than ever with the new CHOPPING STALK ROLLS. Featuring 10 intermeshing knives, these rolls size most residue 6 inches or less. Plus, they explode the top of the stalk for reduced tire and track wear and drop residue right on top of the row for improved planter performance in no-till or strip-till operations.

Along with the chopping stalk roll, John Deere offers other uniquely engineered solutions to meet the residue processing needs of your 600/700 SERIES CORN HEAD.

STRAIGHT FLUTED STALK ROLLS for slow residue breakdown

OPPOSED KNIFE ROLLS for moderate stalk processing

INTERMESHING KNIFE ROLLS for aggressive stalk processing

CHOPPING STALK ROLLS for highly aggressive stalk processing

Visit us to learn more about Stalk Roll Solutions.

1234

GIVE YOURSELF ACUTTING EDGE

Opposed Knife Rolls (for dry corn)

Intermeshing Knife Rolls (for moist corn)

Chopping Stalk Rolls

Stalk RollsNUMBER DESCRIPTION TYPE LIST NOW

40 and 90 Series

H104091 LH Tapered Stalk Roll John Deere $ 167.61 $ 154.20

H104090 RH Tapered Stalk Roll John Deere $ 167.61 $ 154.20

H150139 LH Straight Fluted Stalk Roll John Deere $ 167.61 $ 154.20

H150138 RH Straight Fluted Stalk Roll John Deere $ 167.61 $ 154.20

AH227072 Knife Stalk Roll Kit John Deere $1,093.39 $1,005.92

600 Series – 606 (-740311), 608 (740473), 612 (-740749)

HXE11082 LH Straight Fluted Stalk Roll John Deere $ 437.34 $ 402.35

HXE11081 RH Straight Fluted Stalk Roll John Deere $ 437.34 $ 402.35

HXE11079 LH Opposed Knife Roll John Deere $ 480.00 $ 441.60

HXE11080 RH Opposed Knife Roll John Deere $ 480.00 $ 441.60

600/700 Series – 606 (740312-), 608 (740474-), 612 (740750-)

HXE41144 LH Straight Fluted Stalk Roll John Deere $ 472.16 $ 434.39

HXE41143 RH Straight Fluted Stalk Roll John Deere $ 472.16 $ 434.39

HXE110671 LH Opposed Stalk Roll John Deere $ 503.78 $ 453.78

HXE110672 RH Opposed Stalk Roll John Deere $ 503.78 $ 453.78

HXE110675 LH Intermeshing Stalk Roll John Deere $ 525.90 $ 475.90

HXE110676 RH Intermeshing Stalk Roll John Deere $ 525.90 $ 475.90

HXE141569 LH Chopping Stalk Roll John Deere $ 729.51 $ 679.51

HXE141570 RH Chopping Stalk Roll John Deere $ 729.51 $ 679.51

COMBINE PARTS

10

Complete gear cases are available when one goes down. Choose from different options including John Deere, John Deere Reman, and A&I Products.

Row Unit Gear Cases


40 and 90 Series

PG200881 Gear Case John Deere Reman $1,682.24 $1,547.66

A-AH209794 Gear Case A&I Products $1,668.31

600 Series (-745100)

DE30417 Gear Case John Deere $4,316.53 $3,971.21

600 Series (745100–785000)


600 Series (785001-)


A-AH209794

Row Unit Slip ClutchesNUMBER DESCRIPTION TYPE LIST NOW

40 and 90 Series

AH146250 Slip Clutch 11/8" Hex Shaft $283.37 $260.70

AH209784 Slip Clutch 11/4" Hex Shaft $247.95 $228.11

600 Series (-745100)

AH218768 Slip Clutch Without StalkMaster $236.44 $217.52

KXE10109 Slip Clutch with Hardware With StalkMaster $698.84 $642.93

AXE19434 Slip Clutch With StalkMaster $694.57 $639.00

600 Series (745100–785000)

AXE50867 Slip Clutch Without StalkMaster $372.66 $342.85


600 Series (785001-)

AXE50867 Slip Clutch Without StalkMaster $372.66 $342.85


When replacing the StalkMaster blades make sure to inspect and replace the bushings as well.

StalkMaster™ Blades


600 Series (-745100)

HXE36504 Blade John Deere $23.99 $22.07

H233284 Blade Bushing John Deere $11.27 $10.37

A-H233284 Blade Bushing A&I Products $ 8.38

600 Series (745101-)

HXE36504 Blade John Deere $23.99 $22.07

HXE24237 Blade Bushing John Deere $15.54 $14.30

A-HXE24237 Blade Bushing A&I Products $11.08

Trash DeflectorNUMBER DESCRIPTION TYPE LIST NOW

600 Series (-745100)

H227244 Deflector $ 93.43 $ 85.96

600 Series (745100-)

AXE18146 Deflector 30", 36", 38" $220.90 $203.23

AXE47158 Deflector 20", 22" $248.97 $229.05

COMBINE PARTS

11

Ear-saver shields are integrated into the row-unit deck shields. The ear gates, as they are referred to, prevent ears of corn from falling out from the front of each row unit.

Ear Savers


40 and 90 Series

H166582 Ear Saver John Deere $5.01 $4.61

A-H166582 Ear Saver A&I Products $3.55

600 Series

HXE33313 Ear Saver Inner Points John Deere $8.46 $7.78

A-H226324 Ear Saver Inner Points A&I Products $5.58

HXE38892 Ear Saver Outer Points John Deere $8.46 $7.78

A-H226325 Ear Saver Outer Points A&I Products $5.83

John Deere has improved the composite shoe cover with an embedded reflective strip in the top of the cover, and simplified the installation to just snap on over the existing cast point, eliminating the need to remove the bolt.

Shoe Cover

NUMBER DESCRIPTION LIST NOWH207895 Shoe Cover $25.95 $23.87

To minimize the chance of kernel damage when harvesting high-moisture corn (greater than 25 percent moisture), an insert can be installed in the auger floor that will close the gap between the floor and the auger flighting. While not required for use with the insert, a second kit can be installed that provides a lower auger position to further enhance grain quality.

High Moisture Kits


Auger Floor Insert:

BXE10960 606C, 706C Series (6-row, 30") John Deere $ 754.21 $ 693.87

BXE10962 608C, 708C Series (8-row, 30") John Deere $1,377.85 $1,267.62




KXE10428 612FC, 712FC Series (12-row, 30") John Deere $2,176.13 $2,002.04




Auger Height Adjustment Kit:

BXE10973 606C, 608C, 706C, 708C (PIN -805,000) John Deere $ 163.72 $ 150.62BXE10974 612C, 616C, 618C, 712C, 716C, 718C

(PIN -805,000)John Deere $ 401.34 $ 369.23

12

Platform Parts

Tapered Tip

Anti-Buildup Zone

Controlled Breakage Zone

Full Section Undergoes Austempering Heat Treatment

Innovative Engineering

John Deere sickle sections are engineered for maximum performance.■ The tapered tip and consistent serrations maintain sharpness■ The anti-buildup zone reduces clogging and increases capacity■ The innovative breakage zone allows the section to break, rather than bend, without damaging guards–all

while reducing overall cutterbar weight■ Austempering heat treatment gives the entire section strength and balanced wear

Fine-Tooth Sections – Recommended for small grains. Coarse-Tooth Sections – Recommended for green-stemmed crops like soybeans. No-Till Sections – Recommended in no-till conditions to prevent corn stalks from pinching.


900, 900F, 900R Series – 3" Cutting Systems

H207929 Dura-Lite Fine-Tooth John Deere $1.94 $1.78

H207930 Dura-Lite Coarse-Tooth John Deere $1.94 $1.78

600/700 Series – 4" Cutting Systems, Dura-Twin Sections

H153329 Fine-Tooth John Deere $2.99 $2.75

A-H153329 Fine-Tooth A&I Products $2.42

H163131 Coarse-Tooth John Deere $2.99 $2.75

A-H163131 Coarse-Tooth A&I Products $2.34

600/700 Series – 4" Cutting Systems, No-Till Sections, Short/Long

H215025 Fine-Tooth John Deere $3.51 $3.23

H215064 Coarse-Tooth John Deere $3.51 $3.23

A-H215064 Coarse-Tooth A&I Products $2.52

Sections

Dura-Twin

Dura-Lite

No-Till Section

COMBINE PARTS

13

*S/L = Short/Long knife section for no-till

600R and 600F Dura-Twin™ Sectionalized Knives

NUMBERCOARSE/FINE TOOTH 18 FT. 20 FT. 22 FT. 25 FT. 30 FT. 35 FT. LIST NOW

Head Section:

AH213012 Coarse 1 1 1 1 1 1 $399.22 $339.34

AH218357 Coarse, S/L* 1 1 1 1 1 1 $439.13 $373.26

AH213011 Fine 1 1 1 1 1 1 $399.22 $339.34

Middle Section:

AH218389 Coarse 1 1 1 1 2 2 $275.69 $234.34

AH218388 Coarse $303.25 $257.76

AH219604 Fine 1 1 1 1 2 2 $275.69 $234.34

End Section:

AH204247 Coarse 1 $217.88 $185.20

AH159567 Coarse 1 $ 82.70 $ 70.30

AH164035 Coarse 1 $171.09 $145.43

AH166904 Coarse 1 $121.93 $103.64

AH159216 Coarse 1 $ 62.45 $ 53.08

AH168298 Coarse 1 $ 35.33 $ 30.03

AH218362 Coarse, S/L* 1 $239.67 $203.72

AH218361 Coarse, S/L* 1 $ 90.97 $ 77.32

AH218360 Coarse, S/L* 1 $188.21 $159.98

AH218382 Coarse, S/L* 1 $134.12 $114.00

AH218380 Coarse, S/L* 1 $ 68.67 $ 58.37

AH204246 Fine 1 $217.88 $185.20

AH155557 Fine 1 $ 82.70 $ 70.30

AH155520 Fine 1 $171.09 $145.43

AH166900 Fine 1 $121.93 $103.64

AH155555 Fine 1 $ 62.45 $ 53.08

AH166963 Fine 1 $ 35.34 $ 30.04

Splice Kit:

AH205918 Coarse 2 2 2 2 3 3 $ 22.52 $ 19.14

AH218363 Coarse, S/L* 2 2 2 2 3 3 $ 24.79 $ 21.07

AH205715 Fine 2 2 2 2 3 3 $ 22.52 $ 19.14

900D Draper Dura-Twin Sectionalized KnivesNUMBER TEETH PER INCH 25 FT. 30 FT. 36 FT. LIST NOW

Head Section:

AH215256 14 1 1 1 $392.91 $333.97

Middle Section (reinforced):

AH219604 14 1 2 $275.69 $234.34

End Section:

AH155520 14 1 $171.09 $145.43

AH155557 14 1 $ 82.70 $ 70.30AH166963 14 $ 35.34 $ 30.04Splice Kit:

AH205715 14 2 3 $ 22.52 $ 19.14

COMBINE PARTS

14

600FD and 700FD Dura-Twin Sectionalized KnivesNUMBER COARSE/FINE TOOTH 30 FT. SD 30 FT. DD 35 FT. DD 40 FT. DD 45 FT. DD LIST NOW

LH Head Section:

AXE54280 Coarse 1 1 1 1 1 $562.21 $477.88

AXE54282 Coarse, S/L* 1 1 1 1 1 $562.19 $477.86

AXE54334 Fine 1 1 1 1 1 $512.51 $435.63

RH Head Section:

AXE54281 Coarse 1 1 1 1 $550.31 $467.76

AXE54283 Coarse, S/L* 1 1 1 1 $541.63 $460.39

AXE54285 Fine 1 1 1 1 $523.66 $445.11

Middle Section:

AH218389 Coarse 2 2 2 $275.69 $234.34

AH218388 Coarse, S/L* 2 2 2 $303.25 $257.76

AH219604 Fine 2 2 2 $275.69 $234.34

LH End Section:

AH159567 Coarse 1 $ 82.70 $ 70.30

AH218361 Coarse, S/L* 1 $ 90.97 $ 77.32

AH155557 Fine 1 $ 82.70 $ 70.30

AXE18620 Coarse 1 $140.04 $119.03

AXE18673 Coarse, S/L* 1 $140.36 $119.31

AH231825 Fine 1 $176.10 $149.69

AH229470 Coarse 1 $270.09 $229.58

AH229405 Coarse, S/L* 1 $294.88 $250.65

AH231465 Fine 1 $217.18 $184.60

AH226582 Coarse 1 $121.09 $102.93

AH226756 Coarse, S/L* 1 $ 94.33 $ 80.18

AH226762 Fine 1 $100.96 $ 85.82

AXE29477 Coarse 1 $177.96 $151.27

AXE29481 Coarse, S/L* 1 $155.19 $131.91

AXE29479 Fine 1 $177.96 $151.27

RH End Section:

AXE18623 Coarse 1 $166.00 $141.10

AXE18678 Coarse, S/L* 1 $165.99 $141.09

AH231827 Fine 1 $176.10 $149.69

AH229508 Coarse 1 $269.04 $228.68

AH229417 Coarse, S/L* 1 $292.67 $248.77

AXE29478 Fine 1 $177.96 $151.27

AH226569 Coarse 1 $121.09 $102.93

AH226571 Coarse, S/L* 1 $ 77.04 $ 65.48

AH226764 Fine 1 $100.96 $ 85.82

AH231478 Coarse 1 $234.78 $199.56

AXE29482 Coarse, S/L* 1 $155.19 $131.91

AXE29480 Fine 1 $155.19 $131.91

Overlapping Section:

AH226571 Coarse 1 1 1 1 $ 77.04 $ 65.48

AH226571 Coarse, S/L* 1 1 1 1 $ 77.04 $ 65.48

AH226494 Fine 1 1 1 1 $ 73.96 $ 62.87

Joint/Splice Kit:

AH205918 Coarse 3 2 2 4 4 $ 22.52 $ 19.14

AH218363 Coarse, S/L* 3 2 2 4 4 $ 24.79 $ 21.07

AH205715 Fine 3 2 2 4 4 $ 22.52 $ 19.14*S/L = Short/Long knife section for no-till

15

Don’t discount your guardsOnly replacing your knives is like sharpening one side of your scissors. A dull edge on your guards can sacrifice cut quality and potentially force you to run slower…costing acres per hour.

John Deere offers green, high-wear guards that come standard from the factory. These guards go through an added boronization process that gives them twice the wear life compared with the standard black guards. If your conditions don’t require that added wear life, the standard, black guards are case hardened all the way around. This provides a longer wear life compared to some aftermarket guards that are only induction hardened at the corners of the cutting edge.

Make sure you’re using the right cutting system for your primary crop.■ Long-point guards and fine tooth sections – small grains■ Blunt-point guards and coarse-tooth sections – soybeans■ No-till sections and guards – to help prevent corn stalks from hairpinning

Visit JohnDeere.com/CombineParts to learn more.


900, 900F, 900R Series

H145791 Green, Standard Heat Treated John Deere $11.87 $10.92

H153719 Silver, Double Heat Treated John Deere $15.43 $14.20

600 Series – Long Point (small grains)

H213508 Black, Standard (Short-Long-Short) John Deere $21.18 $19.49

H213405 Black, Standard (Long-Short-Long) John Deere $21.18 $19.49

H229540 Green, High Wear (Short-Long-Short) John Deere $31.21 $28.71

A-H229540 High Wear (Short-Long-Short) A&I Products $17.27

H229539 Green, High Wear (Long-Short-Long) John Deere $31.21 $28.71

A-H229539 High Wear (Long-Short-Long) A&I Products $16.37

600 Series – Blunt Point (coarse grains)

H213507 Black, Standard (Short-Long-Short) John Deere $21.18 $19.49

H213398 Black, Standard (Long-Short-Long) John Deere $21.18 $19.49


A-H229538 High Wear (Short-Long-Short) A&I Products $14.58


A-H229537 High Wear (Long-Short-Long) A&I Products $14.50

600 Series – No-Till Blunt Point (coarse grains)



Blunt Point

H145791Long Point

No-Till Blunt

Guards

COMBINE PARTS

16

600D and 700D Series Draper BeltsNUMBER 25 FT. 30 FT. 35 FT. 40 FT. LIST NOW

Center Belt:

AXE12531 1 1 1 1 $ 704.51 $ 648.15

Side Draper Belts:

AXE12532 2 $ 990.19 $ 910.97

AXE12533 2 $ 486.78 $ 447.84

AXE14731 2 $ 819.39 $ 753.84

AXE16051 2 $1,189.04 $1,093.92

NUMBER SERIAL NUMBER 30 FT. 35 FT. 40 FT. 45 FT. LIST NOW

Center Belt:

AXE12572 -740834 1 1 $ 521.69 $ 479.95

AXE17364 740835–784999 1 1 1 $ 726.52 $ 668.40

HXE49231 785000- 1 1 1 1 $ 809.88 $ 745.09

Side Draper Belts:

AXE36429 -784999 2 $2,332.97 $2,146.33

AXE35348 -784999 4 2 $1,661.43 $1,528.52

AXE35349 -784999 2 $1,933.06 $1,778.42

AXE31445 785000- 2 $2,158.39 $1,985.72

AXE36550 785000- 4 $1,516.42 $1,395.11

AXE36550 785000- 2 $1,516.42 $1,395.11

AXE36551 785000- 2 4 $2,002.52 $1,842.32

600FD Series Draper Belts

700FD Series Draper BeltsNUMBER 30 FT. 35 FT. 40 FT. 45 FT. LIST NOW

Center Belt:

AXE71261 1 1 1 1 $ 837.00 $ 770.04

Side Draper Belts:

AXE36557 2 $2,841.96 $2,614.60

AXE36558 4 2 $1,957.61 $1,801.00

AXE36559 2 4 $2,426.64 $2,232.51

COMBINE PARTS

17

Reel Fingers help guide crop into the platform. John Deere reel fingers are made out of a unique high-strength poly that increases the stiffness of the fingers for increased strength.

Reel Fingers


900 Series (-645300)

H127035 Finger (package of 100) John Deere $ 1.97 $ 1.81

900 Series (645301–685400)

AH153175 Full Bat (package of 180) John Deere $ 3.04 $ 2.80

H142315 LH Bat John Deere $ 4.04 $ 3.72

A-H142315 LH Bat (package of 10) A&I Products $ 2.96

H142314 RH Bat John Deere $ 4.04 $ 3.72

A-H142314 RH Bat (package of 10) A&I Products $ 2.96

900F (685401-), 900R (685401-), 600F, 600R, 600D (-784999), 600FD (-784999) Series

AH166489 Full Bat (package of 10) John Deere $34.49 $31.73

AH166490 LH Bat (package of 10) John Deere $38.69 $35.59

AH166491 RH Bat (package of 10) John Deere $38.69 $35.59

KXE10477 No Bat (package of 10) John Deere $53.25 $48.99

HXE28926 Auxiliary Finger John Deere $16.87 $15.52

600D (785000-), 600FD (785000-), 700D Series

KXE10423 Finger (package of 10) John Deere $75.30 $69.28

AH166489

AH166490

AH166491

AH206160

AH214869

As crop material moves to the center of the platform, auger fingers, finger bearings, and finger guides deliver material to the feeder house. The fingers and bearings should be checked periodically and replaced if there is excessive play. John Deere offers two different types of auger fingers:Steel Fingers■ John Deere fingers are made out of boron steel and heat-treated for long wear ■ A narrow, breakaway groove in the finger protects it and allows the finger to break,

rather than bend, to prevent damage to the augerComposite Fingers■ John Deere composite fingers are known for their strength and resiliency in most

crop conditions■ Reduce damage from broken fingers

Auger Fingers Kits


900, 900F, 900R Series

AH206160 Steel Finger Kit (set of 8) John Deere $103.15 $ 94.90

AH202965 Composite Finger Kit (set of 8) John Deere $ 98.36 $ 90.49

600F, 600R Series

AH214868 Steel Finger Kit (set of 10) John Deere $121.90 $112.15

A-AH214868 Steel Finger Kit (set of 10) A&I Products $ 91.86

AH214869 Composite Finger (set of 10) John Deere $ 79.78 $ 73.40

A-AH214869 Composite Finger (set of 10) A&I Products $ 53.68

COMBINE PARTS

18

Reduce wrapping of crop material in tough, wet, viney crops (such as soybeans, peas, straight-cut edible beans, and canola) with the reel tine flip-over kit, which also increases visibility to the front of the draper.

Reel Tine Flip-Over Kit


BXE10262 625D, 630D, 635D (MY08–16) and 630FD, 635FD (MY12–15) $3,424.30 $3,150.36

BXE10263 640D (MY08–16) and 640FD (MY12–15) $3,424.30 $3,150.36

BXE10760 630FD and 635FD (MY16-) $3,456.20 $3,179.70

BXE10761 640FD and 645FD (MY16-) $3,456.20 $3,179.70

BXE10873 625D, 630D, 635D (MY17) and 725D, 730D, 735D (MY18-) $3,456.20 $3,179.70

BXE10874 640D (MY17 and 740D (MY18-) $3,456.20 $3,179.70

This height-sensing bundle for 620F, 622F, 625F, 630F, and 635 HydraFlex™ Platforms adapts ground-contacting sensors for use when the flex cutterbar is locked into the rigid position. For use with 50-, 60-, 70-, and S-Series combines.

Header Height Sensors for Rigid Mode

NUMBER APPLICATION LIST NOW

BXE10119 MY 11 and Newer 600 Series Flex Platforms $3,378.10 $3,107.85

The short crop dividers are recommend for small grains and standing drilled beans. The dividers knock down less crop and are a direct replacement for the long crop dividers.

Crop Dividers


900, 900F, 600F, 630FD (-784999), 635FD (-784999), 640FD (-784999)

AH147232 Crop Divider $149.25 $137.31

630FD (785000-), 635FD (785000-), 640FD (785000-), 645FD

KXE10397 Crop Divider (set of 2) $354.09 $325.76AH147232

Feed Drum Anti-Wrap Kit – This kit is recommended for tall, damp crop conditions to reduce drum wrapping. The attachment consists of two brackets that mount near the outer edge of the feed drum and reduce the likelihood of crop wrapping the drum.Center Section Seal Kit – This kit minimizes grain loss when direct-cutting canola and can be utilized for other small grain crops with up to 45 percent decrease in losses from the center feed section compared to previous models.

Crop Feeding Enhancements


Feed Drum Anti-Wrap Kit:

BXE10736 600D Series $165.39 $152.16

BXE10039 600FD Series (-764999) $552.20 $508.02

BXE10408 600FD Series (765000-) $552.20 $508.02

Center Section Seal Kit:

BXE10851 600D, 700D Series $686.40 $631.49

19

Walker Combine Parts

StrongBox batteries are built tough to demanding John Deere factory specifications. No other brand compares with the high-quality construction and internal and external components. For a more economical alternative, our Performance branded batteries can offer a great solution in lighter-use applications.

Walker Combine Batteries

NUMBER DESCRIPTION TYPE

TY25272A 9000, 9010, 9050, 9060 Series StrongBox Activated

SWHDOE-27 9000, 9010, 9050, 9060 Series Performance

See us for pricing.

Ease the hassle of charging your combine’s battery. Convenient location makes it easy to jump-start or charge your batter at ground level. No need to lug a battery charger and booster cables up your combine’s ladder to jump-start the battery.

Battery Boost Terminal Kit


AH224079 9000, 9010, 9050, 9060 Series John Deere $93.67 $86.18

Excessive tension is a major cause of feederhouse conveyor chain wear. It is normal for center strands to sag more because of the weight of the slat and the upward force of crop material.

Walker Combine Feederhouse Chain


Feederhouse Chain (9400, 9410, 9450, 9500, 9510, 9550, 9560):

AH137604 28 Slat John Deere $ 914.45 $ 841.29

A-AH137604 28 Slat A&I Products $ 659.94

AH207777 34 Slat John Deere $1,057.31 $ 972.73


AH137845 49 Slat John Deere $1,095.72 $1,008.06


Feederhouse Chain (9600, 9610, 9650, 9660):




A-AH143400 74 Slat A&I Products $1,109.42

Feederhouse Repair Slats (bolt-on):

H206436 9400, 9410, 9450, 9500, 9510, 9550, 9560 John Deere $ 28.30 $ 26.04

A-H206436 9400, 9410, 9450, 9500, 9510, 9550, 9560 A&I Products $ 21.20

H207776 9600, 9610, 9650, 9660 John Deere $ 23.99 $ 22.07

A-H207776 9600, 9610, 9650, 9660 A&I Products $ 16.37

The quick, easy way to change your combine’s front feederhouse drum height. Simply remove the retaining pin and position the left- and right-hand levers to the desired position for small grain or corn. Kit is not for sidehill combines.

Feederhouse Drum Stop Kit


AH210753 9000, 9010, 9050 Series John Deere $294.75 $271.17

COMBINE PARTS

20

John Deere Black-Hardened Rasp Bars ■ Serrated rasp bar has a gently contoured surface design that wears to an even,

smooth profile■ Recommended for use in harvesting corn, popcorn, soybeans, malting barley,

edible beans, or any seed crop where high quality grain is demanded

John Deere Chrome-Hardened Rasp Bars ■ Provide twice the wear life of the non-chromed rasp bars ■ Feature a smooth, contoured profile design with sharp surface edges ■ Ideal for general use in all crops where long-lasting, efficient threshing

performance is desired

Rasp Bars


Rasp Bars (9400, 9410, 9450, 9500, 9510, 9550, 9560):

Black-HardenedAH205117 LH John Deere $411.37 $378.46AH205118 RH John Deere $411.37 $378.46

A-V12068H Includes LH, RH, and Hardware A&I Products $505.83

Chrome-Hardened

AH205119 LH John Deere $705.48 $649.04

AH205120 RH John Deere $705.48 $649.04

A-V12068C Includes LH, RH, and Hardware A&I Products $655.44

Rasp Bars (9600, 9610, 9650, 9660):

Black-Hardened

AH205122 LH John Deere $509.34 $468.59

AH205123 RH John Deere $509.34 $468.59

A-V12072H Includes LH, RH, and Hardware A&I Products $625.98

Chrome-Hardened

AH205124 LH John Deere $791.18 $727.89

AH205125 RH John Deere $791.18 $727.89

A-V12072C Includes LH, RH, and Hardware A&I Products $789.27

Black-Hardened

Chrome-Hardened

John Deere Concaves■ Strict manufacturing processes maintain the correct radius of the concave with a

tolerance of 5/64-in.■ Flame-cut sidebars ensure easier gauging of the concave-to-cylinder clearance ■ Deeper crossbars and support bars reduce concave bending ■ 13-bar concave was standard on corn and small grain combines

Concaves


AH150497 13-Bar John Deere $1,282.79 $1,180.17

A-AH150497 13-Bar A&I Products $ 929.76

AH136605 14-Bar John Deere $1,222.00 $1,124.24

A-AH136605 14-Bar A&I Products $1,100.80

AH135647 Spike Tooth John Deere $2,003.88 $1,843.57

AH150496 13-Bar John Deere $1,495.22 $1,375.60

A-AH150496 13-Bar A&I Products $1,084.69

AH136604 14-Bar John Deere $1,449.43 $1,333.48

AH135646 Spike Tooth John Deere $1,795.90 $1,652.23

AH150497

COMBINE PARTS

21

Elevator chains should be checked for stretch and adjusted or replaced as required. The rubber paddles can develop rounded corners and edges, resulting in grain leakage. The most common reason for excessive elevator chain wear is too much tension. A chain that has too much tension will get tighter as the chain conveys material and could cause shaft and bearing failures.

Clean Grain and Tailings Elevator Chains


Clean Grain Elevator Chain:

AH162441 9400, 9410, 9500, 9510 John Deere $333.67 $306.98

A-AH162441 9400, 9410, 9500, 9510 A&I Products $269.92

AH162442 9600, 9610 John Deere $346.67 $318.94

A-AH162442 9600, 9610 A&I Products $302.63

AH162058 9450, 9550, 9560, 9650, 9660 John Deere $474.66 $436.69

A-AH162058 9450, 9550, 9560, 9650, 9660 A&I Products $338.40

Tailings Elevator Chain:


A-AH131074 9000, 9010, 9050, 9060 Series A&I Products $232.15

Make sure the cleaning shoe auger gears are properly adjusted to prevent excessive wear. Once the gears touch, back off the clamp 0.8 mm (1/32-in.). Do not run the gears too tight.

Shoe Grain Supply Augers

NUMBER DESCRIPTION TYPE LIST NOWAH169020 LH Flighting

(9000, 9010, 9050, 9060 Series)John Deere $234.24 $215.50

A-AH169020 LH Flighting (9000, 9010, 9050, 9060 Series)

A&I Products $188.77

AH169021 RH Flighting (9000, 9010, 9050, 9060 Series)

John Deere $231.18 $212.69

A-AH169021 RH Flighting (9000, 9010, 9050, 9060 Series)


Vertical Unloading AugersNUMBER DESCRIPTION TYPE LIST NOWRegular – Standard auger from the factory on 9000, 9010, 9050 Series:

AH124852 9400, 9410, 9500, 9510, 9600, 9610 John Deere $ 575.07 $529.06

A-AH124852 9400, 9410, 9500, 9510, 9600, 9610 A&I Products $ 484.92

AH171550 9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660

John Deere $ 612.24 $563.26

A-AH171550 9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660

A&I Products $ 427.35

Grass – Double-flighted auger provides gentler crop handling:

AH140081 9400, 9410, 9450 (-695100), 9500, 9510, 9550 (-695200), 9600, 9610, 9650 (-695300)

John Deere $ 818.22 $752.76

AH171558 9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660

John Deere $1,076.75 $990.61

High Wear – Constructed with heavy-duty segmented flighting:

AH154962 9400, 9410, 9500, 9510, 9600, 9610 John Deere $ 980.45 $902.01

A-AH154962 9400, 9410, 9500, 9510, 9600, 9610 A&I Products $ 698.35

AH171554 9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660

John Deere $ 982.24 $903.66

A-AH171554 9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660


COMBINE PARTS

22

Different chaffers are available from:1. Non-Adjustable Fixed – Recommended for small grains such as wheat, barley, etc.2. Adjustable General Purpose – Recommended for corn, soybeans, grain sorghum,

small grains, oil seed crops, and specialty crops.3. Adjustable Deep Tooth – Recommended in high-yielding corn or when harvesting

on slopes where the larger louver opening of these elements can help to increase cleaning-shoe capacity.

Top Chaffer


9400, 9410, 9450, 9500, 9510, 9550, 9560

AH130486 Fixed John Deere $483.24 $444.58

A-AH130486 Fixed A&I Products $336.23

AH172949 General Purpose John Deere $389.18 $358.05

A-AH172949 General Purpose A&I Products $344.07

AH172951 Deep Tooth John Deere $414.27 $381.13

A-AH172951 Deep Tooth A&I Products $338.72

9600, 9610, 9650, 9660

AH130485 Fixed John Deere $456.72 $420.18

A-AH130485 Fixed A&I Products $328.39

AH172948 General Purpose John Deere $462.03 $425.07

A-AH172948 General Purpose A&I Products $422.71

AH172950 Deep Tooth John Deere $440.19 $404.97

A-AH172950 Deep Tooth A&I Products $408.65

A-AH172951

Different sieves are available from:1. Non-Adjustable Fixed – Recommended for small grains such as wheat, barley, etc. 2. Adjustable General Purpose – Recommended for corn, soybeans, grain sorghum,

small grains, oil seed crops, and specialty crops.

Bottom Sieve


9400, 9410, 9450, 9500, 9510, 9550, 9560

AH131217 Fixed (1/8-in. round hole) John Deere $582.91 $536.28

A-AH131217 Fixed (1/8 in. round hole) A&I Products $316.24


A-AH131219 Fixed (3/8-in. round hole) A&I Products $329.27

AH130160 General Purpose (9400, 9500) John Deere $420.90 $387.23

A-AH130160 General Purpose (9400, 9500) A&I Products $459.76

AH172957 LH General Purpose John Deere $568.31 $522.85

AH172956 RH General Purpose John Deere $568.31 $522.85

9600, 9610, 9650, 9660





AH130159 General Purpose (9600) John Deere $460.03 $423.23

AH172955 LH Gereral Purpose John Deere $487.55 $448.55

AH172954 RH Gereral Purpose John Deere $487.55 $448.55

COMBINE PARTS

23

Chopper balance must be maintained. Follow operator manual to ensure proper blades are replaced. Depending on type of chopper, either 6 or 8 blades must be replaced to keep balance.

Straw Chopper Knives


Regular Cut Straw Chopper (one straight blade per support):


Fine Cut Straw Chopper (two straight blades per support):



Wide Spread Fine Cut Straw Chopper (two paddle blades per support):



AH205910

AH205909

A great way to get your grain tank cleaned out before changing crops or storing your combine for the season. Simply hang a bucket on the hinge of this high-density polyethylene chute, unsnap the access door, and capture grain without spilling. It works for draining moisture as well.

Grain Tank Cleanout Kit




Installing an additional grain-level sensor enables an operator to more easily tell when the grain tank is full when harvesting on sidehills.

Additional Grain Tank Sensor


BH78464 9050, 9060 Series John Deere $235.40 $216.57

Protect the floor of your combine cab with a cardboard mat. The mats are cutout specifically for the 9000, 9010, 9050, and 9060 Series combines. Comes in package of five.

Cardboard Floor Mats



Enhance performance on hillsides. The tall center chaffer divider and grain agitators prevent grain from shifting to one side of the cleaning shoe, keeping it spread evenly across the chaffer for reduced grain loss.

SideHill Performance Kit


AH221775 9000, 9010, 9050, 9060 Series $422.25 $388.47

24

STS- and S-Series Combine Parts

StrongBox batteries are built tough to meet demanding John Deere factory specifications. No other brand compares with the high-quality construction and internal and external components. For a more economical alternative, our Performance branded batteries can offer a great solution in lighter-use applications.

STS- and S-Series Combine Batteries

NUMBER DESCRIPTION TYPETY25879A 9560, 9660, 9760, 9860, 9570, 9670,

9770, 9870, S550, S650, S660, S670StrongBox Activated

SWHP-31E 9560, 9660, 9760, 9860, 9570, 9670, 9770, 9870, S550, S650, S660, S670

Performance

TY26783A S680, S690 StrongBox Activated See us for pricing.

Excessive tension is a major cause of feederhouse conveyor chain wear. It is normal for center strands to sag more because of the weight of the slat and the upward force of crop material.

STS- and S-Series Feederhouse Chain


9560, 9570, S550

AH231006 Feederhouse Chain John Deere $1,123.84 $1,033.93

A-AH231006 Feederhouse Chain A&I Products $ 778.39

9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870

AH224926 Feederhouse Chain John Deere $1,130.49 $1,040.05

A-AH224926 Feederhouse Chain A&I Products $ 880.65

S650, S660, S670, S680, S690 (below Serial Number -775001)

AXE24307 Feederhouse Chain John Deere $1,701.52 $1,565.40

A-AXE24307 Feederhouse Chain A&I Products $1,145.83

S650, S660, S670, S680, S690 (above Serial Number 775001-)

AXE27247 Feederhouse Chain John Deere $2,207.21 $2,030.63

A-AXE27247 Feederhouse Chain A&I Products $1,472.21

A&I Products offers an economical repair solution for worn feederhouse chain when the cast slats are ok. Simply unbolt the old slats and install on the new chains. A separate bolt kit is also available for installation.

A&I Products Slatless Feederhouse Chain

NUMBER DESCRIPTION APPLICATION LIST

A-AH231006LS 3-Strand Chain 9560 STS, 9570 STS, S550 $592.53

A-AXE24307LS 3-Strand Chain S660, S670, S680, S690 $588.25A-AXE27247LS 4-Strand Chain S650, S660, S670, S680, S690,

S760, S770, S780, S790$898.07

A-JDC100BK Bolt Kit $ 48.61

25

Tech Tip: Keep a clearance gauge handyJohn Deere offers a convenient gauge that measures wear on threshing elements, separator tines, and concaves to help you know when it’s time to replace them. Order yours today.

Combine Clearance Gauge:AH204933 LIST $3.60 NOW $3.31

Visit JohnDeere.com/CombineParts to learn more.

All separator tines listed below are available in kits of (3) only. To maintain rotor balance, all three must be installed in a row around the circumference of the rotor.

STS- and S-Series Separator Tines


9560, 9570, S550

AH209452 Standard John Deere $185.18 $157.40

9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690

AH208554 Standard John Deere $123.07 $104.61

A-AH208554 Standard A&I Products $ 75.02

AH209123 High Wear John Deere $198.15 $168.43

A-AH209123 High Wear A&I Products $154.36

It is important to note that three different threshing element designs are needed for the Bullet Rotor:■ First Row of Front Cone: Requires one kit of (3) threshing elements designed for

mounting on the front surface of the front cone.■ Second Row of Front Cone: Requires one kit of (3) threshing elements designed for

mounting on the surface of the mid-section of the front cone.■ Rear Portion: Requires three kits of (3) threshing elements designed to mount on

the rear portion of the rotor.All threshing elements listed below are available in kits of (3) only. To maintain rotor balance, all three must be installed in a row around the circumference of the rotor.

STS- and S-Series Threshing Elements


Corn and Grain Elements for 9560, 9570, S550:

AH219770 1st Row John Deere, Standard-Wear, Rifled $834.66 $767.89

AH219771 2nd Row John Deere, Standard-Wear, Rifled $505.49 $465.05

KXE10160 3rd–5th Row John Deere, Standard-Wear, Rifled $328.66 $302.37

AH219773 3rd–5th Row John Deere, High-Wear, Rifled $475.82 $437.75

Corn and Grain Elements for 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690:

AH216674 1st Row John Deere, Standard-Wear, Rifled $751.01 $690.93

A-AH216674 1st Row A&I Products, High-Wear, Rifled $554.25

AH216675 2nd Row John Deere, Standard-Wear, Rifled $491.46 $452.14

A-AH216675 2nd Row A&I Products, High-Wear, Rifled $382.84

AH216677 3rd–5th Row John Deere, Standard-Wear, Rifled $248.51 $228.63

A-AH216677 3rd–5th Row A&I Products, Standard-Wear, Rifled $166.74

AH216678 3rd–5th Row John Deere, High-Wear, Rifled $363.33 $334.26

A-AH216678 3rd–5th Row A&I Products, High-Wear, Rifled $262.80

COMBINE PARTS

26

■ Small-wire concaves are standard on small-grain combines and are recommended for use in wheat, barley, and other cereal crops. Additionally, they are recommended for use in specialty crops such as grass seed.

■ Large-wire concaves are standard on rice combines and available as an option on corn and small-grain combines. They are recommended for rice, sorghum, soybeans, and corn.

■ Round bar concaves are standard equipment on corn combines and are recommended for use in corn and soybeans. Additionally, they are recommended for use in specialty crops such as edible beans and food corn.

Concaves listed below come in sets of three.

STS- and S-Series Concaves


Small-Wire Concaves (9560, 9570, S550):

A-V18054 Standard Wear A&I Products $2,198.47

Small-Wire Concaves (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690):

BXE10388 Standard Wear John Deere $3,025.00 $2,783.00

A-V18026 Standard Wear A&I Products $2,156.42

BXE10389 High Wear John Deere $3,630.00 $3,339.60

Large-Wire Concaves (9560, 9570, S550):

BH84290 Standard Wear John Deere $2,422.20 $2,228.42

Large-Wire Concaves (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690):

BXE10390 Standard Wear John Deere $2,915.00 $2,681.80


Round Bar Concaves (9560, 9570, S550):

BH84291 Standard Wear John Deere $3,345.10 $3,077.49

Round Bar Concaves (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690):


• For additional threshing in hard-to-thresh crops like wheat, barley, clover, flax, and some grass seeds

• Available for small and large wire concaves• Covers the front open portion of small and large wire concaves on the bottom side

Concave Cover Plates


9560, 9570, S550

BH84293 Cover Plates John Deere $339.90 $312.71

9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690, S760, S770, S780, S790

BH84534 Cover Plates John Deere $640.20 $588.98

A-BH81876 Cover Plates A&I Products $171.84

Concave inserts provide the additional threshing action required for harvesting small grains with the round bar concaves. Concave inserts are easy to install and remove as you switch between crops.

STS- and S-Series Concave Inserts


Concave Inserts (9560, 9570, S550):

BH84294 Set of 2 John Deere $ 905.30 $832.88

Concave Inserts (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690):

BH84308 Set of 2 John Deere $1,018.60 $937.11

COMBINE PARTS

27

Elevator chains should be checked for stretch and adjusted or replaced as required. The rubber paddles can develop rounded corners and edges, resulting in grain leakage.

STS- and S-Series Elevator Chains

NUMBER DESCRIPTION TYPE LIST NOWClean Grain Elevator Chain:

AXE28559 9650, 9750, 9560, 9660, 9760, 9860, 9570, 9670, S550, S650, S660

John Deere $456.57 $420.04

A-AXE28559 9650, 9750, 9560, 9660, 9760, 9860, 9570, 9670, S550, S650, S660


AXE28560 9770, 9870, S670, S680 John Deere $611.94 $562.98

A-AXE28560 9770, 9870, S670, S680 A&I Products $429.79

AXE16681 S690 John Deere $985.78 $906.92

Tailings Elevator Chain:

AH148021 9650, 9750, 9560, 9660, 9760, 9860, 9570, 9670, 9770, 9870, S550, S650, S660, S670

John Deere $227.43 $209.24

A-AH148021 9650, 9750, 9560, 9660, 9760, 9860, 9570, 9670, 9770, 9870, S550, S650, S660, S670


AXE10556 S680 (-785000), S690 (-785000) John Deere $330.90 $304.43

AXE47615 S680 (785001-), S690 (785001-) John Deere $256.36 $235.85

Tech Tip:The most common reason for excessive elevator chain wear is too much tension. A chain that has too much tension will get tighter as the chain conveys material and could cause shaft and bearing failures.

Make sure the cleaning shoe auger gears are properly adjusted to prevent excessive wear. Once the gears touch, back off the clamp 0.8 mm (1/32-in.). Do not run the gears too tight.

STS- and S-Series Shoe Grain Supply Augers


AH146786 LH (All STS- and S-Series) John Deere $151.24 $139.14

A-AH146786 LH (All STS- and S-Series) A&I Products $101.07

AH146787 RH (All STS- and S-Series) John Deere $151.25 $139.15

A-AH146787 RH (All STS- and S-Series) A&I Products $101.08

There are three different types of vertical augers:Regular – Standard wear were base equipment on S550, S650, and S660 combines High Wear – Option on S550, S650, and S660 combines High Wear/High Unloading Rate – Standard on S670, S680, and S690

STS- and S-Series Vertical Unloading Augers


9650, 9750, 9560, 9660, 9760, 9570, 9670, S560

AH146840 Regular John Deere $ 501.39 $ 461.28

A-AH146840 Regular A&I Products $ 414.33

AH164070 High Wear John Deere $ 748.60 $ 688.71

A-AH164070 High Wear A&I Products $ 567.61

9660, 9760, 9860, 9670, 9770, 9870

AXE12921 High Wear/High Unloading Rate John Deere $1,081.55 $ 995.03

A-AXE12921 High Wear/High Unloading Rate A&I Products $ 768.53

S550, S650, S660

AXE53848 Regular John Deere $ 596.55 $ 548.83

AXE53849 High Wear John Deere $ 813.37 $ 748.30

S660, S670, S680, S690

AXE18070 High Wear/High Unloading Rate John Deere $1,153.72 $1,061.42

A-AXE18070 High Wear/High Unloading Rate A&I Products $ 819.31

COMBINE PARTS

28

These concaves give more versatility to match varying crop conditions. Plus they’re lighter and easier to change and install. Available for S-Series and STS Combines.*

*Not available for 9560 STS, 9570, or S550 Combines.

Kondex® Revolution™ Half-Width Concaves


BXE11144 MaxThresh™ Kit $1,961.30 $1,804.40

BXE11145 MaxRound™ Kit $1,961.30 $1,804.40AXE76998 Plate, Concave Front Lip $ 235.71 $ 216.85AXE76999 Concave, Half Width, MaxThresh $ 902.89 $ 830.66

AXE77000 Concave, Half Width, MaxRound $ 865.26 $ 796.04

Different chaffers are available from:1. Non-Adjustable Fixed – Recommended for small grains such as wheat, barley, etc.2. Adjustable General Purpose – Recommended for corn, soybeans, grain sorghum,

small grains, oil seed crops, and specialty crops.3. Adjustable Deep Tooth – Recommended in high-yielding corn or when harvesting

on slopes where the larger louver opening of these elements can help to increase cleaning-shoe capacity.

STS Top Chaffer


9650 STS, 9750 STS, 9660 STS, 9760 STS, 9860 STS, 9670 STS, 9770 STS, 9870 STS

AH211936 General Purpose John Deere $ 958.33 $ 881.66

AXE20455 General Purpose with Touchset John Deere $1,254.40 $1,154.05

AH212248 Deep Tooth John Deere $1,010.28 $ 929.46

A-AH212248 Deep Tooth A&I Products $1,083.60

AXE20457 Deep Tooth with Touchset John Deere $1,382.03 $1,271.47

Different sieves are available from:1. Non-Adjustable Fixed – Recommended for small grains such as wheat, barley, etc.2. Adjustable General Purpose – Recommended for corn, soybeans, grain sorghum,

small grains, oil seed crops, and specialty crops.

STS Bottom Sieve


9650 STS, 9750 STS, 9660 STS, 9760 STS, 9860 STS, 9670 STS, 9770 STS, 9870 STS

AH211944 General Purpose John Deere $ 967.94 $ 890.50

A-AH211944 General Purpose A&I Products $1,059.57

AXE20456 General Purpose with Touchset John Deere $1,273.28 $1,171.42

A-AH212241 General Purpose with Touchset A&I Products $ 999.83

AH213857 Fixed Tooth (1/8" round hole) John Deere $1,310.17 $1,205.36

AH213860 Fixed Tooth (3/8" round hole) John Deere $1,099.97 $1,011.97

A-AH213860 Fixed Tooth (3/8" round hole) A&I Products $ 795.33

AH212249 Deep Tooth John Deere $1,278.34 $1,176.07

AXE20458 Deep Tooth with Touchset John Deere $1,311.46 $1,206.54

A-AH212247 Deep Tooth with Touchset A&I Products $1,017.53

COMBINE PARTS

29

John Deere 70- and S-Series combines use a unique wing blade. The wing blade design moves more air, providing an even spread of material across the entire width of the cutting platform. The cutting edge of the wing blade is made of wear-resistant material that extends wear life. Chopper balance must be maintained. Follow operator manual to ensure proper blades are replaced. Depending on type of chopper, either 6 or 8 blades must be replaced to keep balance.

STS- and S-Series Straw Chopper Knives


9650, 9750, 9660, 9760, 9860

AH205910 Straight Blade John Deere $ 51.01 $ 46.93

A-AH205910 Straight Blade A&I Products $ 50.65

AH205909 Paddle Blade John Deere $ 87.12 $ 80.15

A-AH205909 Paddle Blade A&I Products $ 62.72

9570, 9670, 9770, 9870, S550

AH225937 Wing Blade John Deere $138.19 $127.13

AH225940 Scoop Blade John Deere $172.24 $158.46

A-AH225940 Scoop Blade A&I Products $126.07

S660, S670, S680, S690

KXE10255 Wing Blade John Deere $175.97 $161.89

KXE10256 Straight Blade John Deere $199.66 $183.69

A-KXE10256 Straight Blade A&I Products $142.17

From the outside, aftermarket belts may look just the same, but the value of a belt is mostly found on the inside. The top section of a belt is the tension section that stretches as the belt forms around the sheave or pulley while the bottom section compresses around it.

The center section is where a belt gets its strength. Perfectly aligned cords running through the center of John Deere belts give them strength and longevity.

For more information and aftermarket comparison, visit JohnDeere.com/CombineParts.

It’s what’s on the inside that counts.

COMBINE PARTS

30

Get the high-capacity drive power you need to harvest high-yielding corn at faster ground speeds. Compared to standard variable feederhouse drives, this heavy-duty drive offers stronger belts and larger gears along with more durable shafts and bearings.

*Not for use with 612 StalkMaster Corn Head. Combine must be equipped with heavy-duty feederhouse drive.

High-Torque Variable Speed Feederhouse Drive


9660, 9760, 9860, 9670, 9770, 9870, S660, S670, S680, S690

BH84447 High-Torque Feederhouse Drive John Deere $8,144.40 $7,492.85

Keep you feet warm with this heated floor mat. The floor mat conducts heat directly over your feet from an internal heating element.Features: ■ Lays over top of existing floor mat ■ Same material and color as existing floor mat ■ Plugs into auxiliary power strip

Heated Floor Mat

NUMBER DESCRIPTION APPLICATION LIST NOW

BXE11223 Heated Floor Mat S600 and S700 Series $540.10 $496.89

Features: ■ Integrated design can fold away with hinge on left-hand side ■ Easy access at ground level ■ 4.1-cu. ft. of storage on two decks ■ Tool cabinet may be locked for added security

Large Combine Tool Cabinet


BXE11139 Tool Cabinet S700 Series (805001-) $773.30 $711.44

The side hill performance package can improve combine performance on slopes up to 8 degrees (14 percent) by substantially reducing cleaning shoe grain loss to acceptable levels. Most kits include chaffer dividers, grain return pan partitions, grain agitator paddles and attaching hardware.Feature benefit: ■ Reduces grain loss out of the rear of the combine on side hill slopes ■ Increases combine productivity by not having to slow down on side hill slopes

Sidehill Performance Kits

NUMBER APPLICATION SERIAL NUMBER LIST NOWBH84391 9650 STS, 9750 STS, 9660 STS,

9760 STS, 9860 STS$ 678.70 $ 624.40

BH84524 9670 STS, 9770 STS, 9870 STS $ 971.30 $ 893.60BXE10076 S660 and S670 745100–785000 $1,282.60 $1,179.99BXE10077 S680 and S690 745100–785000 $ 997.70 $ 917.88BXE10475 S650, S660, S670, S760, S770 785001- $1,009.80 $ 929.02BXE10476 S680, S690, S780, S790 785001- $1,009.80 $ 929.02

Improves tailings volume and tank sample in challenging conditions such as canola, lentils, weedy conditions and heavy bearded crops.

High Performance (HP) Chaffer


AXE54556 HP Chaffer S660–S690 MY12–15 $2,353.91 $2,165.60

AXE48125 HP Chaffer S660–S690, S760–S790 MY16- $2,030.46 $1,868.02

COMBINE PARTS

31

Add the Grain Tank Mirror Kit to any S-Series Combine to increase visibility of the grain tank.

Grain Tank Mirror Kit

NUMBER LIST NOW

KXE10458 $168.76 $155.26

Improve comfort while harvesting with this simple upgrade. Foot pegs can be installed on all S-Series Combines going back to MY12.

Foot Pegs

NUMBER LIST NOW

KXE10454 $198.91 $183.00

The fast, easy way to tell if your grain tank is full when harvesting on sidehills. Includes mounting hardware and clamps.

Additional Grain Tank Sensor


BH81598 70-Series $244.20 $224.66

BXE10270 S-Series $244.20 $224.66

The Unloading Auger Boot on current-model combines is now available as a retrofit for all high-unloading rate systems (3.2/3.8 bps). The design of the unloading auger boot delivers a more controlled stream of crop to the grain-handling equipment.

Unloading Auger Boot

NUMBER LIST NOW

HXE71069 $207.46 $190.86

ActiveYield maximizes the system’s accuracy with no effort or time away from harvest. Every field, every variety, ActiveYield delivers quality yield data. ActiveYield senses the weight of the grain in the grain tank as it fills. The combine uses the weight information to calibrate the yield system continually throughout harvest. This gives the operator optimized system accuracy and reliable yield data.

ActiveYield™ Retrofit Kit


BXE10503 MY12–MY15 S-Series Combines $3,548.60 $3,264.71

BXE10797 MY16- S-Series Combines $2,641.10 $2,429.81*Compatible with corn, soybeans, wheat, barley, and canola.*Not compatible with S660 and S760 with manual grain tank extensions.

32

■ Upgrade your factory lights to LED with one simple kit ■ Kit includes lights for all front headlights located at top of cab ■ Direct fit, plugs into existing machine wiring harness

LED Light Kits

NUMBER DESCRIPTION TYPE LIST

9000, 9010, 9050, 9060 Series with Rectangle Lights:

A-WL9000KT Kit (6 rectangle lights) A&I Products $565.25

9060, 9070 Series with Oval Lights:

A-WL9697KT Kit (8 oval lights) A&I Products $804.67

A-WL9697KT

8-position angleheight adjustment

Solid bar spring limiter reduces residue entanglement

10 wide skid made of abrasion-resistant steel

15–20% lighter for reduced weight on the header

Easy 1-pin removal

Torsion spring for consistent down pressure

Protect your tires from tough corn stalksTAKE EM DOWN

Without StalkStryker With StalkStryker

www.StalkStryker.comStalk Stryker™ knocks stalks over, helping to minimize tire wear for all field equipment, prevent erosion, and promote plant fiber breakdown. Available for John Deere, Case IH, New Holland, Drago, and Geringhoff.JohnDeere.com/StalkStryker

-

’

"

Enjoy hands-free access and improved viewing of your iPad®, iPhone®, or other mobile device from the seat of your cab. These mounting brackets are adjustable, providing easy access without interfering with visibility or machine controls.

In-Cab Mobile Device Mounting


BXE10481 Guide Bar (MY12–MY13 S600 Series) $231.00 $212.52

BXE10927 Guide Bar (MY14–MY17 S600 Series) $196.90 $181.15

BXE10480 Slide Kit (MY12–17 S600 Series) $ 70.40 $ 64.77

BXE10479 Tablet Mount (MY12–17 S600 Series) $124.30 $114.36

BRE10015 Cell Phone Mount (MY12–17 S600 Series) $ 67.10 $ 61.73

BXE10901 9–10-in. Tablet Mount (S700 Series) $192.50 $177.10

BXE10864 11–12-in. Tablet Mount (S700 Series) $204.60 $188.23

NUMBER DESCRIPTION PKG. QTY. LIST NOW

BXE11034 ICA2 Attachment Bundle 1 $10,787.70 $9,924.68

BXE11035 ICA2 Attachment Bundle 1 $10,787.70 $9,924.68

BXE10948 Active Terrain Adjustment 1 $ 3,894.00 $3,582.48

Get Sound Advice from Combine Advisor™

With a trifecta of technologies designed to maximize your harvest, Combine Advisor is now available as a field-installed retrofit kit for S700 Series Combines (MY18 and newer). The robust suite helps you target optimal settings and then automates the combine to maintain peak performance in changing conditions. Combine Advisor includes:■ HarvestSmart™ to automate feed rate■ Active Terrain Adjustment™ to manage changing terrain■ Auto Maintain w/ActiveVision™ to monitor crop conditions

Contact your John Deere dealer to learn more about Combine Advisor.

33

8-position angleheight adjustment

Solid bar spring limiter reduces residue entanglement

10 wide skid made of abrasion-resistant steel

15–20% lighter for reduced weight on the header

Easy 1-pin removal

Torsion spring for consistent down pressure

Protect your tires from tough corn stalksTAKE EM DOWN

Without StalkStryker With StalkStryker

www.StalkStryker.comStalk Stryker™ knocks stalks over, helping to minimize tire wear for all field equipment, prevent erosion, and promote plant fiber breakdown. Available for John Deere, Case IH, New Holland, Drago, and Geringhoff.JohnDeere.com/StalkStryker

-

’

"

34

Loewen Combine Parts have built a reputation on the tradition of serving the farmer with quality, affordable aftermarket parts for almost 60 years. Loewen has been a part of the large A&I Products selection for several years, and offers an option to provide you the Right Part at the Right Price.

Loewen products are available for many makes of combines, including: John Deere, Case-IH, New Holland, Massey Ferguson, Gleaner, Challenger, and more.

Staple products include concaves, chaffers, sieves, feeder chains, elevator chains, rasp bars, and more! Ask your John Deere dealer for more information about Loewen and A&I Products.

The GT-5300 provides all the benefits of our MoistureMatch Grain Moisture Tester (SW20300) and more. Featuring cutting-edge technology, the GT-5300: ■ Automatically averages a selectable number of tests ■ Provides the actual moisture-limit percentage ■ Stores user calibration and averages for each grain ■ Offers a larger, illuminated LCD display

GT-5300 Grain Moisture Tester


SW5300 Grain Moisture Tester $313.49 $294.68

The GT-30300 Grain Moisture Tester really measures up. Featuring the latest technology, the SW30300: ■ Provides temperature range between 40–160°F ■ Measures moisture and test weight (no pre-weighing) ■ Provides moisture range between 6–45% ■ Tests 16 grains (program space for over 40 grains) ■ Connects to diagnostics via USB ■ Features large back-lit LCD screen and fonts ■ Repeatability and accuracy ± 0.2% in normal moisture range ■ Comes with 2-year limited warranty

GT-30300 Grain Moisture Tester New—Hot Grain Capabilities up to 160°F


SW30300 GT-30300 Grain Moisture Tester $509.81 $479.22

35

Precision Ag Solutions for Harvest

Get ready for harvest with the right attachments for your combine displays and receivers.

Combine – AMS Display & Receiver Brackets


PF90500 GreenStar Display Bracket, 60 or 70 Series Combines $302.50 $278.30

BPF11186 Cornerpost Display Bracket Kit, S-Series Combines $218.90 $201.39

BPF11356 Universal GPS Bracket $237.60 $218.59

PF91009 StarFire™ Receiver Deluxe Shroud Conversion Bracket $121.00 $111.32

AH211594 Combine StarFire Position Receiver Bracket – 60 Series $149.00 $137.08

PF10758 Combine StarFire Position Receiver Bracket – 50 Series $ 74.30 $ 68.36

Mass-flow sensors are mounted in the grain tank on the top of the clean-grain elevator head assembly. The sensor is used for accurate yield measuring.

Combine Mass Flow and Moisture Sensors


PF90866 Sensor Kit, Mass Flow and Moisture – 9400, 9500, or CTS $2,783.00 $2,560.36

PF90867 Sensor Kit, Mass Flow and Moisture – 9400, 9500, or CTS $2,783.00 $2,560.36

PF90864 Sensor Kit, Mass Flow and Moisture – 9600 Models $2,783.00 $2,560.36




PF90874 Sensor Kit, Mass Flow and Moisture – 50 Series Models $3,267.00 $3,005.64

PF90873 Sensor Kit, Mass Flow and Moisture – 60 or 70 Series Models $2,963.40 $2,726.33

AutoTrac™ Intergrated Machine Kits and GreenStar™ Ready Kits make it easy for you to be Precision Ag-ready when the time arrives. The AutoTrac Machine Kits include the appropriate machine steering controller when necessary and AutoTrac Ready accessories. The display, receiver, and software to complete the system are sold separately. These field-installed kits are an integrated guidance solution for John Deere machines and are compatible with the GreenStar 3 or GreenStar 2 system components. Gain the edge and get the results you want and need with genuine John Deere AMS components.

Guidance & Machine Control

PF90697

NUMBER DESCRIPTION APPLICATION LIST NOWPF90876 AutoTrac Combine Machine Kit 50 Series $6,473.50 $5,955.62

PF90875 AutoTrac Combine Machine Kit 60 Series $5,566.00 $5,120.72

PF90629 AutoTrac Combine Machine Kit 70 Series $5,566.00 $5,120.72

PF90863 AutoTrac Tractor Machine Kit 8000 Series $5,142.50 $4,731.10



BPF10139 GreenStar Ready Universal Guidance Kit, upgradeable

John Deere and other makes equipment

$ 825.00 $ 759.00

PF90742 AutoTrac RowSense Kit for Universal Sensor

Combines $ 847.00 $ 779.24

PF91001 AutoTrac RowSense Universal Sensor Corn heads $1,023.00 $ 941.16

PF90697 AutoTrac RowSense Mechanical Feelers 30-in. or 75cm spacing $1,023.00 $ 941.16

PF90755 AutoTrac RowSense Retrofit Kit 50 or 60 Series John Deere combine

$ 423.50 $ 389.62

PF90757 AutoTrac RowSense Retrofit Kit 90 Series corn head $ 665.50 $ 612.26

For parts with core charge, price shown is the exchange price after core is returned.

For parts with core charge, price shown is the exchange price after core is returned.

TRACTOR HOT BUYSContact your John Deere dealer to take advantage of these limited

time special prices on the parts and attachments listed below.

Category 1 Ballast BoxBW15073 LIST – $302.50 NOW – $257.13

Gas StrutHood: 6100D–6140D and 6120–6430.AL174088 LIST – $ 44.37 NOW – $ 37.71

Rear Window: 5E, 5M, 5R, 6000, 6010, 6020, 6030, 6L, 6M, and 7030 Series Tractor Cabs.AL222225 LIST – $ 91.63 NOW – $ 77.89

Steering Column: 7200–7800 and 7210–7810.RE152042 LIST – $129.81 NOW – $110.34

Hood: 7200–7800 and 7210–7810RE70191 LIST – $ 53.06 NOW – $ 45.10

Door: 8560–8960 and 8570–8970RE234998 LIST – $ 44.78 NOW – $ 38.06

Multiple-Power Outlet StripFits John Deere tractors, combines, sprayers, and other self-propelled equipment.RE68495 LIST – $54.52 NOW – $46.34

Tractor Cab Mounting Bracket7R, 8R, and 9R Series Tractors using the existing mount holes.RE317435 LIST – $141.90 NOW – $120.62

Center Link 6105M, 6110–6410, 6110L–6510L, 6120, 6220, 6125M, 6200–6500, 6215, 6415, 6230, and 6320L–6520LAL200985 LIST – $196.82 NOW – $167.30

36

Hydraulic Couplers7000, 7010, 7020, 7030, 8020, 8030, 8R, 9020, 9030, and 9R.RE577560 LIST – $100.97 NOW – $90.87

Seat Cushion – Top and Bottom 4055–4455, 7210–7810, 8430, 8560–8960, and 8570–8970.RE163029 LIST – $160.46 NOW – $136.39

4055–4455, 7210–7810, 8430, 8560–8960, and 8570–8970.RE163027 LIST – $148.25 NOW – $126.01

Power Beyond Coupling Kit8000, 8010, and 8020.RE217697 LIST – $733.70 NOW – $623.65

Fender Kit and Fenders 8100–8400, 8110–8410, and 8120–8520.R191189 LIST – $389.94 NOW – $331.45RH: 7610–7810, 7710–7810, and 8120–8520.R192452 LIST – $489.83 NOW – $416.36LH: 7610–7810, 7710–7810, and 8120–8520.R192451 LIST – $487.25 NOW – $414.16

Roof7200R–7280R, 8225R–8360R, and 9360R–9560R Series Tractors.RE321581 LIST – $1,044.58 NOW – $887.897200–7800 and 7210–7810.RE67856 LIST – $ 750.51 NOW – $637.9330, 40, 50, 55, and 60 Series Row Crop Tractors.R61142 LIST – $ 466.09 NOW – $396.18

37

We offer a complete portfolio of tractor starters and alternators so you get the part you need—for as long as you own your machine—no matter its color, or your budget. With Genuine John Deere parts, you’ll get the same quality components that were designed and tested with your machine at the factory. John Deere Reman parts are completely disassembled and remanufactured—not rebuilt—to meet OEM specifications. We also offer A&I Products for an economical aftermarket solution. That’s the value of choice.

The Right Part at the Right Price.

Price shown is exchange price after core is returned.

Mid and Large Tractor StartersNUMBER APPLICATION TYPE LIST NOW

RE543483 5603, 5425–5625, 5E Limited, 5085–5125 E/EL/M/ML/R, 6D, 6E John Deere $566.01 $520.73

SE502913 5603, 5425–5625, 5E Limited, 5085–5125 E/EL/M/ML/R, 6D, 6E John Deere Reman $452.81 $416.59

SE501414 4650, 4850, 8430, 8440, 8640 – Nippondenso John Deere Reman $488.66 $449.57

A-RE41875 4000, 4020, 4030–4630, 4040–4440, 4050–4850, 8440, 8640, 8450 Tractors – Nippondenso A&I Products $348.13

SE501444 4000, 4020, 4030–4630, 4040–4440, 4050–4850, 8440, 8640, 8450 Tractors – Delco John Deere Reman $519.39 $477.84

A-TY6701 4000, 4020, 4030–4630, 4040–4440, 4050–4850, 8430, 8440, 8450, Tractors – Delco A&I Products $341.57

RE70957 7610–7810, 7630–7930, 8100–8400, 8110–8410, 8120–8520, 9120–9520 John Deere $571.88 $526.13

SE501403 7610–7810, 7630–7930, 8100–8400, 8110–8410, 8120–8520, 9120–9520 John Deere Reman $457.51 $420.91

A-RE70957 7610–7810, 7630–7930, 8100–8400, 8110–8410, 8120–8520, 9120–9520 A&I Products $298.93

RE527400 6230–6430, 6030 Premium, 6615–6715, 71–7330, 7030 Premium, 6M, 6R Series Tractors John Deere $520.63 $478.98

SE501868 6230–6430, 6030 Premium, 6615–6715, 71–7330, 7030 Premium, 6M, 6R Tractors John Deere Reman $416.51 $383.19

A-RE527400 6230–6430, 6030 Premium, 6615–6715, 71–7330, 7030 Premium, 6M, 6R Tractors A&I Products $339.29

AL110597 40, 50, and 55 Series Utility Tractors, 6100–6400, 6110–6410, 6405 John Deere $500.49 $460.45

SE501427 40, 50, and 55 Series Utility Tractors, 6100–6400, 6110–6410, 6405 John Deere Reman $400.39 $368.36

A-AL110597 40, 50, and 55 Series Utility Tractors, 6100–6400, 6110–6410, 6405 A&I Products $268.14

RE519975 6120–6420, 6215, 6415 John Deere $527.75 $485.53

SE501854 6120–6420, 6215, 6415 John Deere Reman $422.19 $388.41

A-RE519975 6120–6420, 6215, 6415 A&I Products $295.33

SE501420 7700, 7800, 8100–8300 John Deere Reman $510.94 $470.06

A-SE501420 7700, 7800, 8100–8300 A&I Products $348.13

RE515843 8770, 8870, 9200–9400, 9220–9620, 9330–9630, 9R John Deere $683.79 $629.09

SE501862 8770, 8870, 9200–9400, 9220–9620, 9330–9630, 9R John Deere Reman $547.03 $503.27

A-RE515843 8770, 8870, 9200–9400, 9220–9620, 9330–9630, 9R A&I Products $428.42

LARGE TRACTOR PARTS

38

NUMBER DESCRIPTION TYPE LIST NOWWater Pumps:

RE546906 6010, 6030, 6003, 6005, 6015, 6D, 6030 Premium, 7210–7510, 7220–7520, 7030 Premium John Deere $311.33 $286.42

SE501609 6010, 6030, 6003, 6005, 6015, 6D, 6030 Premium, 7210–7510, 7220–7520, 7030 Premium John Deere Reman $219.43 $201.88

A-RE505980 6010, 6030, 6003, 6005, 6015, 6D, 6030 Premium, 7210–7510, 7220–7520, 7030 Premium A&I Products $132.03

RE500214 7600, 7700, 7800, 8100–8400 (-009999) John Deere $450.33 $414.30

SE501012 7600, 7700, 7800, 8100–8400 (-009999) John Deere Reman $344.58 $317.01

A-RE500214 7600, 7700, 7800, 8100–8400 (-009999) A&I Products $277.35

RE521502 7610–7810, 7720–7920, 8000 (010000-), 8010, 8020, 9000, and 9020 John Deere $472.16 $434.39

SE501596 7610–7810, 7720–7920, 8000 (010000-), 8010, 8020, 9000, and 9020 John Deere Reman $424.96 $390.96

A-RE521502 7610–7810, 7720–7920, 8000 (010000-), 8010, 8020, 9000, and 9020 A&I Products $260.64

RE530194 8130–8530, 8225R–8370R, 9230, and 9370R John Deere $313.28 $288.22

SE501228 8130–8530, 8225R–8370R, 9230, and 9370R John Deere Reman $281.96 $259.40

A-RE530194 8130–8530, 8225R–8370R, 9230, and 9370R A&I Products $233.69

Radiators:

AL115002 6000, 6010 John Deere $670.97 $617.29

A-AL115002 6000, 6010 A&I Products $585.29 RE165030 7210–7510 John Deere $713.32 $656.25

A-RE165030 7210–7510 A&I Products $613.81

RE63188 7600–7800, 7610–7810 (SN -089999) John Deere $870.57 $800.92

A-RE63188 7600–7800, 7610–7810 (SN -089999) A&I Products $749.14

RE159541 8000 and 8010 John Deere $998.40 $918.53

A-RE159541 8000 and 8010 A&I Products $854.82

Alternators:

SE501363 4040–4840, 4050–4850, 8430, 8630, 8440, 8640 Tractors John Deere Reman $305.57 $281.12

A-TY26050 4040–4840 w/ cab, 4050–4650 w/ cab, 8430, 8630, 8440, 8640 Tractors A&I Products $186.35

SE501371 4055–4455, 4555–4955, 4560–4960, 8560–8960, 8570–8970 Tractors John Deere Reman $343.04 $315.60

A-TY6684 4055–4455, 4555–4955, 4560–4960, 8560–8960, 8570–8970 Tractors A&I Products $213.88

AL166646 6110–6410, 6120–6420, 6215–6715, 6230–6430 Premium, 7220–7520, 7130–7430 Premium. 120 Amp

John Deere $616.42 $567.11

SE501827 6110–6410, 6120–6420, 6215–6715, 6230–6430 Premium, 7220–7520, 7130–7430 Premium. 120 Amp

John Deere Reman $493.13 $453.68

A-AL166646 6110–6410, 6120–6420, 6215–6715, 6230–6430 Premium, 7220–7520, 7130–7430 Premium. 120 Amp


RE218703 8120–8520, 8120T, 8520T John Deere $622.43 $572.64

SE501825 8120–8520, 8120T, 8520T John Deere Reman $483.45 $444.77

A-RE218703 8120–8520, 8120T, 8520T A&I Products $371.68

AL207585 6200, 6300, 6400. 55 Amp John Deere $458.64 $421.95

SE501346 6200, 6300, 6400. 55 Amp John Deere Reman $272.49 $250.69

A-AL81436 6200, 6300, 6400. 55 Amp A&I Products $152.65

SE501347 6200, 6300, 6400. 85 Amp John Deere Reman $276.87 $254.72

A-AL81437 6200, 6300, 6400. 85 Amp A&I Products $163.19

AL166645 6020, 6015, 6030, 7220–7520. 90 Amp John Deere $503.46 $463.18

SE501829 6110–6410, 6120–6420, 6405, 6605, 6015, 7220–7520. 90 Amp John Deere Reman $402.78 $370.56

A-AL166645 6110–6410, 6120–6420, 6405, 6605, 6015, 7220–7520. 90 Amp A&I Products $325.76

Only your John Deere dealer can offer you the value of choice by providing three options to meet your parts needs: Genuine John Deere parts, John Deere Reman, and aftermarket alternatives from A&I Products. Our extensive selection of parts means you get the right part with the right fit all at the right price.

John Deere 6000/7000/8000/9000 Series Tractor Parts

Note: For parts that have a core charge, the price shown is the exchange price after the core has been returned.

LARGE TRACTOR PARTS

39

Expansion Valve

When things heat up and you need to replace your AC compressor, make sure you talk to the experts at your John Deere dealer. Many aftermarket offerings are automotive-style compressors and not meant for off-road applications. Compressor offerings from John Deere include original equipment new compressors, John Deere Reman compressors, and A&I Products. John Deere Reman compressors are remanufactured back to the original John Deere specifications. A&I Products offer AC compressors without the oil so they can be used in either R12 or R134a applications.

AC Compressors

NUMBER DESCRIPTION STYLE TYPE LIST NOWAL176857 6200–6400, 6210–6410, 6405, 6605 10PA John Deere $581.52 $535.00

SE503057 6200–6400, 6210–6410, 6405, 6605 10PA John Deere Reman $465.24 $428.02

A-AL155836 6200–6400, 6210–6410 10PA A&I Products $432.74

AH169875 72–7400, 7210–7510, 7020, 7030, 8000, 8010, 8020, 8030, 8R, 9020, and 9030 10PA John Deere $720.22 $662.60

SE503065 72–7400, 7210–7510, 7020, 7030, 8000, 8010, 8020, 8030, 8R, 9020, and 9030 10PA John Deere Reman $591.73 $544.39

A-AH169875 Denso Style w/ Clutch – 72–7400, 7210–7510, 7020, 7030, 8000, 8010, 8020, 8030, 8R, 9020, and 9030

10PA A&I Products $393.33

SE503047 4000, 4020–4620, 4030–4630, 4040–4840, 5020, 6030, 7020, 8430–8630, 8440–8640 – R134a

A6 John Deere Reman $505.90 $465.43

A-RE60697 Compressor, New w/ Clutch (1 groove 5.75" pulley, 12V) – 4030–4630, 4040–4840, 8430–8630, 8440–8640

A6 A&I Products $406.51

SE503051 4230–4630, 4040–4840, 4050–4850, 4055–4955, 4560–4960, 8450–8850, 8560–8960 – R134a

6E John Deere Reman $463.85 $426.74

A-RE12513 Compressor, New, Denso Style w/ Clutch (ear mtd., 5.75" pulley) 4050–4650, 4055–4755, 4560–4960, 8450–8850, 8560–8960

6E A&I Products $361.36

Note: For parts that have a core charge, the price shown is the exchange price after core has been returned.

The receiver/drier is designed to remove moisture from the air-conditioning system. Over time, it will become saturated with moisture. Moisture combines with refrigerants and creates acids that accelerate the corrosion of internal component parts. Therefore, if an air-conditioning system has been in service for any extended period of time and is opened for service, it is wise to replace the receiver/drier.

Receiver Drier


RE577432 2050, 2055, 3050, 3055, 4050, 4055, 4060, 8040, and 8050 Series Tractors John Deere $ 60.13 $ 55.32

A-904-304 2050, 2055, 3050, 3055, 4050, 4055, 4060, 8040, and 8050 Series Tractors A&I Products $ 25.67

AL219020 5E, 5M, 5R, 5420, 5520, 5425, 6020, 6030, 6003, 6D, 6M, and 7130–7530 Series Tractors John Deere $148.53 $136.65

RE283957 5010, 6010, 8000, 7020, 7030, 8000, 8010, 8020, 8030, 8R, 9000, 9020, 9030, and 9R Series Tractors John Deere $ 60.36 $ 55.53


RE576834 4050, 4055, 8040, 7000, 7010, 7030, 9000, 9020, 9030, 7R, 8R, 8RT, 9R, 9RT John Deere $ 46.51 $42.79

A-804-464 R12/R134a Filter Drier A&I Products $ 32.61

AT162848 8100–8400, 8100T–8400T, 8110–8410, 8110T–8410T John Deere $ 62.49 $57.49

A-AT162848 8100–8400, 8100T–8400T, 8110–8410, 8110T–8410T A&I Products $ 43.33

RE576835 7720–7920, 8120–8520, 8120T–8520T, 8130–8430 John Deere $ 88.57 $81.48

A-RE214440 7720–7920, 8120–8520, 8120T–8520T, 8130–8430 A&I Products $ 67.73

AL220790 40, 50, 55, 6000, 6010 Series Utility Tractors – R134A John Deere $ 83.97 $77.25

AL220792 6015, 6020 Series John Deere $103.91 $95.60

A-AL162467 6015, 6020 Series A&I Products $ 75.70

LARGE TRACTOR PARTS

40

Beltline, post, and headliner kits are available as replacement parts for row-crop, 4WD, and utility tractors with Sound-Gard bodies. Made of pre-cut brown or black original equipment upholstery/insulation material for a precise fit. Two foam parts have been added to the row-crop kits to improve the fit behind the seat. Insulation is a full two inches thick in key areas for greater sound-deadening capacity.

Sound-Gard® Body Upholstery Kits

NUMBER DESCRIPTION APPLICATION LIST NOWRE52945 Beltline Acoustical Upholstery – Black (SGB # -185706) 40 Series Row Crop Tractors $294.30 $270.76

RE57259 Beltline Acoustical Upholstery – Black (SGB # 185707-) 40 Series Row Crop Tractors $339.81 $312.63

RE48532 Post Kit – Black 30 and 40 Series Row Crop Tractors $129.67 $119.30

RE223619 Headliner Kit 30 and 40 Series Row Crop Tractors $586.10 $539.21

RE52947 Beltline Acoustical Upholstery – Brown 50 Series Row Crop Tractors $383.37 $352.70

RE155148 Beltline Acoustical Upholstery – Brown 55 and 60 Series Row Crop Tractors $417.70 $384.28

RE155149 Cab Post Kit 55 and 60 Series Row Crop Tractors $113.00 $103.96

Cab Upholstery Kits for 7-, 8-, and 9-Series TractorsNUMBER DESCRIPTION APPLICATION LIST NOWRE221550 LH Fender, w/ Field Office 8000, 8010, 8020, 9000, 9020 $337.40 $310.41

RE221551 LH Fender, w/ Instructional Seat 8000, 8010, 8020, 9000, 9020 $347.78 $319.96

RE221549 LH Fender, w/ Cup Holder 8000, 8010, 8020, 9000, 9020 $298.21 $274.35

R221552 Upholstery, RH Console (SN 010000-) 8000, 8010, 8020 $256.36 $235.85

R257816 Rear RH Cab Post 7720–7920, 8000, 8010, 8020, 8030, 9020 $ 84.25 $ 77.51

R257815 Rear LH Cab Post 7720–7920, 8000, 8010, 8020, 8030, 9020 $ 87.06 $ 80.10

R124235 Rear RH Upper Trim 8000, 8010, 8020, 9000, 9020 $107.43 $ 98.84

R134755 Rear LH Upper Trim 8000, 8010, 8020, 9000, 9020 $101.66 $ 93.53

RE215719 Upholstery Kit 7000, 7010 $694.70 $639.12

RE183605 Headliner, Fabric 7000, 7010 $361.27 $332.37

RE43477 Headliner, Vinyl 7000, 7010 $301.48 $277.36

A&I Sound-Gard Cab Upholstery KitsNUMBER DESCRIPTION APPLICATION LISTA-CKT300E Cab Foam Kit – Early 40 Series, Black 3040, 3140, 3640, 4040, 4240, 4440, 4640, 4840 for

Sound-Gard Cab, Serial Number 185706 and Below$146.79

A-CKT305L Cab Foam Kit – Late 40 Series, Black 3040, 3140, 3640, 4040, 4240, 4440, 4640, 4840 for Sound-Gard Cab, SN 185707 and Above

$177.63

A-CKT310E Cab Foam Kit – Early 30 Series, Black 4030, 4230, 4430, 4630 for Sound-Gard Cab, Serial Number 63623 and Below

$124.83

A-CKT315L Cab Foam Kit – Late 30 Series, Black 4030, 4230, 4430, 4630 for Sound-Gard Cab, Serial Number 63624 and Above

$142.30

A-CPK400 Corner Post Upholstery Kit, Black 4040 (2WD), 4240 (2WD), 4440 (2WD), 4640 (2WD), 4840 (2WD)

$ 89.87

A-CKT360 Cab Foam Kit, Tan 7200–7800, 7210–7810 $217.86

A-CPK430 Corner Post Upholstery Kit, Tan 7200–7800, 7210–7810 $ 82.86

A-CHL230 Headliner, Tan, Perforated Vinyl 7200–7800, 7210–7810 $250.00

41

Repower Program Finance Options Minimum Purchase

365 Days NP/NI (12 Months)1 $10,000

Fixed 1.9% with 24 Equal Monthly Payments2 $10,000

Fixed 2.9% with 36 Equal Monthly Payments3 $10,000

If your 7-, 8-, or 9-Series Tractor needs a major repair, you can now fix it thanks to a limited-time offer from John Deere Financial. The all-new Repower Program provides No-Payment/No-Interest (NP/NI) or low-cost financing for new and Reman engines, transmissions, axles, and final drives—as well as repairs to front independent link suspension. But that’s not all because you can also finance work to cab interior, hydraulics, engine accessories and exterior finishes. Qualifying models include:■ 7000/7010/7020/7030 Tractors■ 8000/8010/8020/8030 Tractors■ 9000/9020/9030 Tractors

Take advantage of this special financing opportunity through October 31, 2020 when you use your Multi-Use Account. Ask us about the Repower Program today.

REBUILD WITH REPOWER

Extended Warranty for John Deere Reman Engines*Starting February 2020, optional extended warranty terms for John Deere Reman engines can be purchased. Coverage options are between 2-year/2,500 hours and 5-year/4,000 hours. To qualify for the program, the engine must be dealer installed and the customer must purchase the extended warranty contract within 90 days of engine installation. Contact your John Deere Dealership for complete details.*Complete engines only.

1 Subject to John Deere Financial approval and John Deere dealer participation. Unless otherwise specified, programs are for purchases on agricultural and commercial Multi-Use Accounts only. Minimum finance amount is required. After Promotional Period, interest charges will begin to accrue at the Multi-Use Account Rate. Programs subject to change, without notice, at any time. Offer valid November 1, 2019–October 31, 2020.

2 Offer valid on qualifying purchases made between November 1, 2019 to October 31, 2020 and is subject to approved credit on a Multi-Use Account, a service of John Deere Financial, f.s.b. For agricultural and commercial use only. Fixed 1.9% APR with 24 equal monthly payments. Payments are required during and after the promotional period. After the promotional period, interest charges will begin to accrue at the regular Multi-Use Account rate. Minimum $10,000 purchase required. Available at participating merchants, see your local merchant for complete details.

3 Offer valid on qualifying purchases made between November 1, 2019 to October 31, 2020 and is subject to approved credit on a Multi-Use Account, a service of John Deere Financial, f.s.b. For agricultural and commercial use only. Fixed 2.9% APR with 36 equal monthly payments. Payments are required during and after the promotional period. After the promotional period, interest charges will begin to accrue at the regular Multi-Use Account rate. Minimum $10,000 purchase required. Available at participating merchants, see your local merchant for complete details.

Dealers: R-12 Discount applies, refer to program bulletin for complete details.

LARGE TRACTOR PARTS

42

If it’s time to replace your track mid-rollers, make sure you talk to the experts at your local John Deere dealer. They carry a full line of track and undercarriage replacement parts. Rubber replacement mid-rollers are an economical option and are a good choice for tractors that are not in heavy transport conditions. Poly mid-rollers have a higher heat resistance and are the best choice for narrow tracks or machines that are roading under high-load conditions.

Track Tractor Mid-Rollers


RE576549 Narrow Gen 2 Poly Mid-Roller – 8RT $453.19 $416.93

RE576550 Wide Gen 2 Poly Mid-Roller – 9030T, 9RT $515.00 $473.80

RE266293 Narrow Rubber Mid-Roller – 8RT $324.45 $298.49

RE251071 Wide Rubber Mid-Roller – 9030T, 9RT $412.00 $379.04

RE272331 Wide Rubber Mid-Roller – 8RT, 9RX $412.00 $379.04

RE575013 Poly Mid-Roller – 8RT, 9RX $566.50 $521.18

RE254786 Narrow Mid-Roller – 8020T, 8030T $375.95 $345.87

RE254787 Wide Mid-Roller – 8020T, 9020T $412.00 $379.04

Low rate financing options available for track undercarriage repairs of $4,000 and above.Is it time to replace your tracks or rebuild your track undercarriage? We have low-rate finance offers through John Deere Financial. Please see your John Deere dealer for additional details about these offers.■ 365 days No Payments / No Interest (12 months) ■ 24-month 1.9% fixed-rate with 24 equal payments ■ 36-month 2.9% fixed-rate with 36 equal paymentsNote: minimum purchase for each offer is $4,000.00. Offer ends October 31, 2020.All programs subject to John Deere Financial approval credit on a Multi-Use Account, a service of John Deere Financial, f.s.b. Program options are available for Agricultural and Commercial account holders only. After promotional period, interest changes will begin to accrue at the Multi-Use Account rate. Available at participating John Deere Dealers, see your local dealer for complete details.

Price shown is exchange price after core is returned.

John Deere released the Independent Link Suspension (ILS) with model year 2002. Since then we have made improvements to several of the components. If it’s time to replace the steering and suspension parts on your ILS front end, see your John Deere dealer. Improvements include: Easier greasing of inner tie rod. New design of outer tie rod prevents cover plates from pushing out under extreme pressures. Ball joint part improvements keep ball from pushing out the top of the knuckle.

Independent Link Suspension


RE587967 Inner Tie Rod End All 8-Series Tractors with ILS $ 729.04 $ 670.72

RE583653 Outer Tie Rod End All 8-Series Tractors with ILS $ 514.06 $ 472.94RE587968 Tie Rod Assembly (inner and

outer)All 8-Series Tractors with ILS $1,301.64 $1,197.51

RE580643 Control Arm Ball Joint All 8-Series Tractors with ILS $ 568.72 $ 523.22

RE584459 A-Arm Upper Pivot Shaft Expander Pin

All 8-Series Tractors with ILS $ 900.92 $ 828.85

RE186113 Cylinder, Hydraulic Suspension, LH


RE186112 Cylinder, Hydraulic Suspension, RH


RE196847 Barrel, Steering Cylinder ILS All 8-Series Tractors with ILS $2,242.71 $2,063.29

R543839 Guide, Steering Cylinder ILS All 8-Series Tractors with ILS $ 457.21 $ 420.63

RE257129 Rod, Steering Cylinder ILS All 8-Series Tractors with ILS $2,210.75 $2,033.89

RE567107 Seals, ILS Steering Cylinder All 8-Series Tractors with ILS $ 152.37 $ 140.18

RE321770 Accumulator, ILS All 8-Series Tractors with ILS $ 395.98 $ 364.30

RE574236 Universal Driveshaft, ILS All 8-Series Tractors with ILS $1,666.22 $1,532.92

AT149827 7C Spider and Bearing, ILS All 8-Series Tractors with ILS $ 209.68 $ 192.91

LARGE TRACTOR PARTS

43

Leaking or worn-out hydraulic cylinders can lead to drifting loads, slow cycle times, and poor hydraulic system performance.

Hydraulic Cylinders

NUMBER DESCRIPTION APPLICATION LIST NOWHitch Cylinders:

RE232429 Hydraulic Cylinder, 100 MM 7720–7920, 7200R–7280R, and 8225R–8360R

$1,132.83 $1,042.20

RE243298 Hydraulic Cylinder, 112 MM Hitch Cylinder

7830, 7260R–7280R, 8130–8530, 8225R, RT–8360R, RT

$1,216.13 $1,118.84

AHC10774 Hydraulic Cylinder, 115X50-246, 506

7200R–7310R, and 8225R, RT–8400R, RT

$1,232.70 $1,134.08

RE247841 Hydraulic Cylinder, 50X25-221, 396.5

6170R–6190R, 7720–7920, 7630–7830, 7200R, 8120–8520, 8130, 8225R–8335R

$ 688.40 $ 633.33

RE232428 Hydraulic Cylinder, 90 MM 7720–7920, 7630–7930, 7200R–7280R, 8130–8530, and 8225R–8360R

$1,041.17 $ 957.88

Steering Cylinders:

RE12827 Cylinder, Steering Assembly 4050–4450, 4650–4850 $ 695.40 $ 639.77

RE158651 Cylinder, Steering 7200–7800 and 7210–7810 MFWD

$ 808.87 $ 744.16

RE287095 Hydraulic Cylinder, Steering LH 7200R–7310R, 8100–8520, 8225R–8335R

$ 471.64 $ 433.91

RE287094 Hydraulic Cylinder, Steering RH 7200R–7310R, 8100–8520, 8130–8430, and 8225R–8335R

$ 471.64 $ 433.91

When it’s time to replace those worn or damaged front axle parts on your John Deere tractor, we have the parts to meet your needs. We carry original equipment replacement parts, designed and tested to meet factory standards. If a value offering meets your needs, we also carry A&I Products aftermarket parts.

Front Axle Parts

NUMBER APPLICATION TYPE LIST NOWTie-Rod End:

RE12325 50, 55, 60 Series Row-Crop, 7600, 7700, 7800 John Deere $ 73.22 $ 67.36

A-RE12325 50, 55, 60 Series Row-Crop, 7600, 7700, 7800 A&I Products $ 50.94

RE12326 50, 55, 60 Series Row-Crop, 7600, 7700, 7800 John Deere $ 80.93 $ 74.46

A-RE12326 50, 55, 60 Series Row-Crop, 7600, 7700, 7800 A&I Products $ 57.73 Inner Tie-Rod End:

AR63588 30, 40, 50, and 55 Series Row-Crop (small frame) John Deere $ 32.55 $ 29.95

A-AR63588 30, 40, 50, and 55 Series Row-Crop (small frame) A&I Products $ 27.94 Outer Tie-Rod End:

AR63592 4030–4430, 4040–4440, 4050–4455 (16 1/8”) John Deere $ 48.87 $ 44.96

A-AR63592 4030–4430, 4040–4440, 4050–4455 (16 1/8”) A&I Products $ 36.59

AR63833 4630, 4640, 4840, 4650 , 4850, 4555–4955, 4560–4960 – Regular Front End

John Deere $ 64.61 $ 59.44

A-AR63833 4630, 4640, 4840, 4650 , 4850, 4555–4955, 4560–4960 – Regular Front End


AL168708 6000, 6005, 6010, 6015, 6020 Series – MFWD Axle – LH

John Deere $203.36 $187.09

A-AL116740 6000, 6005, 6010, 6015, 6020 Series – MFWD Axle – LH


AL168709 6000, 6005, 6010, 6015, 6020 Series – MFWD Axle – RH

John Deere $186.43 $171.52

A-AL116741 6000, 6005, 6010, 6015, 6020 Series – MFWD Axle – RH


LARGE TRACTOR PARTS

44

Tractor Hydraulic Pumps

Note: For parts that have a core, the price shown is the exchange price after the core has been returned.


AR94660 50ccm – 4010, 4020, 4030, 4040, 4050, 4055 Series – 2WD John Deere $1,843.87 $1,696.36

A-AR94660 50ccm – 4010, 4020, 4030, 4040, 4050, 4055 Series – 2WD A&I Products $1,161.06

AR94661 65ccm – 4000, 4020, 4030, 4040, 4650–4850 FWD, 30 and 40 Series 4WD John Deere $1,976.61 $1,818.48

A-AR94661 65ccm – 4000, 4020, 4030, 4040, 4650–4850 FWD, 30 and 40 Series 4WD A&I Products $1,051.94

RE20839 65ccm – 4555–4955, 4560–4960 John Deere $3,167.45 $2,914.05

AL161041 25ccm – 6000, 6010, 6020, 7200–7200, 7210–7410 John Deere $ 907.19 $ 834.61

PG200864 25ccm – 6000, 6010, 6020, 7200–7200, 7210–7410 John Deere Reman $ 634.96 $ 584.16

AL200830 28ccm – 6010, 6020, 6030, 6M John Deere $ 592.85 $ 545.42

A-AL200830 28ccm – 6010, 6020, 6030, 6M A&I Products $ 430.49

AL202473 35ccm – 6030, 6M John Deere $1,326.43 $1,220.32

AL161043 41ccm – 6000, 6010, 6020, 7000, 7010 John Deere $2,040.27 $1,877.05

PG200865 41ccm – 6000, 6010, 6020, 7000, 7010 John Deere Reman $1,428.18 $1,313.93

RE60267 45ccm – 8000, 8010 John Deere $2,339.61 $2,152.44

PG203168 45ccm – 8020 John Deere Reman $1,637.67 $1,506.66

PG203172 57ccm – 8000, 8010 John Deere Reman $2,288.22 $2,105.16

RE563717 85ccm – 8130–8530 John Deere $5,586.06 $5,139.18

PG204251 85ccm – 8130–8530 John Deere Reman $3,910.25 $3,597.43

RE228005 74ccm – 9000, 9020, 9030, 9360R–9560R John Deere $4,737.45 $4,358.45

PG202076 74ccm – 9000, 9020, 9030, 9360R–9560R John Deere Reman $3,316.21 $3,050.91

The updated driver and driven assemblies will improve serviceability and reliability of the fan drive assembly. The new dry driver and dry driven assemblies require no grease. The customer will no longer need to lubricate these two components once the update is complete. To maximize the reliability of the fan drive system, we encourage customers to replace the driver and driven assemblies at the same time. A worn driven assembly will potentially reduce the expected life of a new driver when only the driver is replaced.

Vari-Cool Fan Drives


RE572544 $740.00 $680.80

RE572545 $760.00 $699.20

RE578435 $1,180.00 $1,085.60

RE587430 $1,200.00 $1,104.00

NUMBER DESCRIPTION APPLICATION LIST NOWRE578435 9.0L Dry Driver MY11 – Current Production

8R/8RT/9360R/9370R$1,180.00 $1,085.60

RE572545 9.0L Dry Driven MY11 – Current Production 8R/8RT/9360R/9370R

$ 760.00 $ 699.20

RE587430 9.0L Dry Driver 8030/9030 (w 9.0L) MY10 8R/8R Stage II

$1,200.00 $1,104.00

RE572544 9.0L Dry Driven 8R MY11 – Current Stage II $ 740.00 $ 680.80

Hydraulic quick disconnect couplers are available in both standard and deluxe versions. The standard couplers allow coupling and uncoupling of hydraulics with pressure from the implement side. The deluxe couplers allow for coupling and uncoupling of hydraulics with pressure from the tractor and/or implement side.

Hydraulic Quick Couplers

NUMBER DESCRIPTION SERIES LIST NOWAL200979 Hydraulic Quick Coupler, STD 6030, 6030 Premium, 6M, 6R $ 86.00 $ 79.12

AL221083 Hydraulic Quick Coupler, Deluxe 6M, 7330 $112.31 $103.33

RE52981 Deluxe Quick Coupler 8000, 8010 $152.01 $139.85

RE206778 Retrofit Kit to ISO Couplers Converts 20, 30, and 40 Series JD to ISO Style Couplers

$203.51 $187.23

LARGE TRACTOR ATTACHMENTS

45

Don’t have a radio head unit in your tractor, no problem! Remove the radio cover, and plug the amplifier directly into your John Deere radio harness and pair your device to stream your music through the factory cab speakers. Place amplifier in the opening, replace the cover and enjoy your favorite music!Features:■ 80 watts max (40-watt RMS) ■ Bluetooth audio (A2DP) ■ Waterproof (IPX6) ■ Operating voltage: 10–18VDC ■ Bluetooth pairing button can be flush mounted ■ 10 amp fuse in waterproof container

2-Channel Bluetooth® Amplifier


SWJAHD240BT 2-Channel Bluetooth Amplifier $115.43 $108.50

Our seat covers are designed for maximum operator comfort—with a durable, thick-foam backrest and no seam to dig into the operator’s legs. Compare our quality and prices to see how we outrank locally manufactured new and remanufactured seats.

Replacement Seat Cushions

NUMBER DESCRIPTION LIST

TY26541 Seat Cushion Kit, Black Vinyl, 2-piece $291.21

TY26545 Seat Cushion Kit, Yellow Vinyl, 3-piece $184.71

TY26546 Seat Cover, Brown Fabric, 2-piece $ 71.01

TY26549 Seat Cushion Kit, Brown Fabric $283.03

TY26550 Seat Cushion Kit, Yellow Vinyl, Contoured $333.68TY15953 Complete Seat Top for 30 and 40 Series Row-Crop and 4WD Tractors with

Mechanical-Suspension Seats$642.56

Add a camera and get a whole new view! The 6R, 7R, 8R, and 9R Series Tractors come equipped with built-in video capability for those who want better visibility when operating large machinery. You can use Voyager cameras, cables, and a special adapter harness on the new R Series Tractors equipped with the touchscreen CommandCenter™ or the GreenStar™ (GS3) 2630 display. These units can utilize one video input.

Voyager Camera System

NUMBER DESCRIPTION APPLICATION LISTSWVCMS20B Voyager Camera with

Mounting Bracket6R/7R/8R/9R Series Tractors $189.63

SWCEC25 25-ft. Extension Harness 7R/8R/9R Series Tractors $ 28.54

SWTY26834 Adapter Harness – R Tractors 7R/8R/9R Series Tractors $104.24

SWTY26845 Adapter Harness IVS 2630 7R/8R/9R Series Tractors $170.61

SWTY27027 6R Camera Harness Kit $302.99

As more and more electronic devices are used in the cab, getting power to keep things running and charge batteries is essential. There are other 12V lighter plugs on the market, but many will only allow operation and “not charge” the device. The PM191-052901 USB adapter will do both. With each port putting out 2.4A, this charger is built to run and charge today’s most power hungry tablets, phones and other devices.

Dual USB 4.8A Charger


PM191-052901 Dual USB Chargers – 4.8A $15.37

COMPACT AND UTILITY TRACTOR PARTS AND ATTACHMENTS

46

The iMatch Quick Hitch provides easy hookup and a guaranteed fit for all Category 1 implements designed to meet the ASAE Category 1 Standard S278.6 for quick- attach hitches.John Deere Quick Hitches are a popular product with some attractive features:■ Powder coating provides a resilient and long lasting finish that look great■ Alloy hooks protect against wear in key locations■ Controlled welding provides strength at the critical joints of the frame■ Knob end handles provide a confident grip for the operator

iMatch/John Deere Quick Hitches

Fuel Protect Benefits include: ■ Lubricity Improver—prevents injector & fuel pump wear■ Cetane Improver—improves combustion; reduces emissions■ Reduce biological growth caused by water■ Prevents and removes deposits

Tech Tip:To aid in better performance and starting when storing your equipment for extended periods of times and to combat poor quality fuel, consider John Deere Fuel Protect Products.

TY27726Fuel Protect/ Winter Formula

TY27723Fuel Protect/ Summer Formula

NUMBER DESCRIPTION LIST NOWLVB25976 iMatch Quick Hitch Category 1 with Adjustable Top Hook.

Includes One Set of Bushings (LVU15507)$383.90 $345.51

LVU12858 One iMatch Quick Hitch Lower Adapter Bushing – Length 33mm (1.3-in.)

$ 24.54 $ 22.09

LVU15507 One iMatch Quick Hitch Lower Adapter Bushing – Length 50mm (1.97-in.)

$ 26.00 $ 23.40

TY27545 Green Quick-Hitch. Fits Category II implements. $586.18

TY27546 Green Quick-Hitch. Fits Category III implements. $738.93

TY27547 Green Quick-Hitch. Fits Category III-N (narrow) implements. $727.41

Protect your investment and your pocketbook from potentially costly repairs by installing a John Deere hood guard. Built to withstand tough daily chores, the hood guard provides protection from adverse conditions and potential operational mishaps. See us for the correct hood guard for your machine.

Hood Guards


BW15900 Fits 1023E, 1025R, and 1026R Tractors $228.80 $201.34

BW15901 Deluxe Hood Guard – 1023E, 1025R, and 1026R Tractors $253.00 $222.64

BW15217 Fits 2025R, 2320, 2210, and 2305 Tractors $267.30 $235.22

BLV10705 Fits 2032R and 2038R (220R loader) $283.80 $249.74

LVB25998 Fits 3E Tractors $275.00 $242.00

BW15219 Fits 3X20 Series Tractors $283.80 $249.74

BW16335 Fits 4M and 4R Series Tractors (less loader only) $306.90 $270.07

BW15084 Fits 5225, 5325, 5425, 5525, 5625, 5603, 5083E, 5093E, and 5101E Tractors $402.60 $354.29

BW16009 Fits 5085E, 5100E, 5075M, 5085M, 5100M, and 5115M Tractors $453.20 $398.82

BW15817 Fits 5045D, 5055D, 5045E, 5055E, 5065E, and 5075E Non-FT4 Tractors $353.10 $310.73

BW16327 Fits 5045E, 5055E, 5065E, 5075E FT4 MY15 and Newer Tractors $397.10 $349.45

BW15800 Fits 6D Tractors MY12 and Prior (6100D, 6115D, 6130D, 6140D) BW16146 $465.30 $409.46

BW16146 Fits 6D – IT4; MY13–MY15 (6105D, 6115D, 6130D, and 6140D) and 6E-FT4; (6105E, 6120E, 6135E) Tractors

$465.30 $409.46

BW15892 Fits 6M and 6R Series Tractors $545.60 $480.13

COMPACT AND UTILITY TRACTOR PARTS AND ATTACHMENTS

47

Keep your tractor running at its peak. Most kits contain an oil filter, air filter, fuel filter, and hydraulic filter.

Filter Paks for Compact Tractors

Scan this code to view our Compact Tractor DIY

Maintenance videos

* Fits Hydrostatic Transmissions only, not for PowrReverser™ Transmissions.

NUMBER APPLICATION LIST NOWLVA21035 Filter Pak, 1023E (SN -117913) and 1026R Tractors $ 67.87 $ 62.44

LVA21036 Filter Pak, 1025R (SN -153036), 2025R (SN HH100001–HH103920), w/ Engine Mount Air Filter

$ 67.75 $ 62.33

LVA21196 Filter Pak, 2210 Tractors $ 61.49 $ 56.57


LVA21204 Filter Pak, 2320 and 2025R (SN -HH100000) Tractors $136.70 $125.76

LVA21201 Filter Pak, 2520, 2720, and 2032R (SN GH100008-) Tractors $ 75.75 $ 69.69

LVA23615 Filter Pak, 2032R (SN -GH100007) and 2038R Tractors $133.62 $122.93

LVA21128 Filter Pak, 3032E and 3038E SN -610,000 Tractors $ 85.17 $ 78.36

LVA21037 Filter Pak, 3032E and 3038E SN 610,000- Tractors Filter Pak, 3025E

$149.71 $137.73

LVA21038 Filter Pak, 3033R, 3039R, and 3046R Tractors $195.16 $179.55

LVA21202 Filter Pak, 3120, 3320, 3520, 3720, 4005, and 4105 Tractors $123.65 $113.76

LVA21039 Filter Pak, 4M and 4R Series Tractors $207.02 $190.46

LVA21192 Filter Pak, 4010 Tractors $106.21 $ 97.71

LVA21197 Filter Pak, 4100 and 4110 Tractors $ 66.71 $ 61.37


LVA21203 Filter Pak, 4120, 4320, 4520, and 4720 Tractors $142.21 $130.83

LVA21198 Filter Pak, 4200, 4300, and 4400 Tractors $ 79.92 $ 73.53

LVA21194 Filter Pak, 4210, 4310, and 4410 Tractors $126.24 $116.14

LVA21199 Filter Pak, 4500, 4600, and 4700 Tractors $ 76.98 $ 70.82

LVA21195 Filter Pak, 4510, 4610, and 4710 Tractors $123.29 $113.43

Having difficulty connecting your driveline to your tractor PTO shaft? Want to put a stop to scraped knuckles, pinched fingers, and the hard work of aligning the splines to get your driveline to slide on the PTO shaft? Then look no further then the John Deere Quik-Knect System. With easy mounting for your tractor and multiple driveline options for your implements, making the connection has never been easier. Push until you hear the click and off you go. To detach your driveshaft, push the yellow arrow down and off it comes. No twisting, turning, holding back the collar...or any frustrated moments. Quickly connect (Quik-Knect) and go!

John Deere Quik-Knect™ System

Increase your visibility while working in dark conditions with these work lights for your Compact or Utility tractor. From halogen to LED, you can choose the lights that are right for your needs.

Work Light Kits

NUMBER APPLICATION LIST NOWLVB25547 Rear Work Light Kit (1 light) – Fits 1, 2, 3, 4 Series, 5D, and 5E Series Open Station Tractors $ 67.10 $ 59.05

LVB25546 Forward Lighting Kit (2 lights) – Fits 1, 2, 3, and 4 Series Open Station Tractors $114.40 $100.67

LVB24853 Rear Work Light Kit (2 lights) – Fits 3000 Twenty, 4000 Twenty, 3R, 4M, and 4R Series Cab Tractors Only $161.70 $142.30

BLV10497 LED Work Light Kit (2 lights) – 1, 2, 3, and 4 Series Open Station Tractors $319.00 $280.72

BLV10400 Warning Light Brush Guard Kit – 1023E, 1025R, 2R, 3E, 4M $ 84.70 $ 74.54

BSJ10163 Floodlamp/Work Lights, LED, (4 lights) – 5085E, 5100E, 5085M, 5075M, 5090M, 5100M, 5115M, 5100MH Cab Models $464.20 $408.50

ENGINE & REMAN PARTS

48

Remanufactured Fuel-Injection Pumps and Injectors

*Some restrictions apply. Coverage includes both parts and labor when your dealer installs the component on your machine, otherwise the coverage is for parts only. See dealer for details.

NUMBER APPLICATION TYPE LIST NOWFuel Pumps:

SE501234 6415, 6320, and 6420 Tractors Stana De10 $1,915.12 $1,761.91

SE501235 6120–6220 and 6215 Tractors Stana De10 $1,915.12 $1,761.91

SE501236 7420 and 7520 Tractors Stana De10 $2,068.34 $1,902.87

SE501237 6615, 6715, 6520, 6620, 7220, and 7320 Tractors Stana De10 $2,068.34 $1,902.87

RE507959 6100D–6140D, 6230–6430, 6320–6520, 6330–6430, 7420–7920, 7130–7930 Tractors OEM $2,251.01 $2,070.93

SE501251 8110–8310 John Deere Reman $3,272.34 $3,010.55

SE500857 8410 John Deere Reman $3,272.34 $3,010.55

Fuel Injectors:

AR74664 6620 and 8820 Combines, 5200–5400, 5440, and 5460 Forage Harvesters, 4050, 4250, 4630, 4640, 4650, 4840, and 4850 Tractors

OEM $ 157.43 $ 144.84

SE501111 6620 and 8820 Combines, 5200–5400, 5440, and 5460 Forage Harvesters, 4050, 4250, 4630, 4640, 4650, 4840, and 4850 Tractors

John Deere Reman $ 110.18 $ 101.37

A-AR74664 6620 and 8820 Combines, 5200–5400, 5440, and 5460 Forage Harvesters, 4050, 4250, 4630, 4640, 4650, 4840, and 4850 Tractors


AR74665 6600, 6620, and 7700 Combines, 4040, 4050, 4240, 4250, 4430, 4440, and 4450 Tractors OEM $ 157.43 $ 144.84

SE501112 6600, 6620, and 7700 Combines, 4040, 4050, 4240, 4250, 4430, 4440, and 4450 Tractors John Deere Reman $ 110.18 $ 101.37

A-AR74665 6600, 6620, and 7700 Combines, 4040, 4050, 4240, 4250, 4430, 4440, and 4450 Tractors A&I Products $ 74.57

RE61593 8200, 8400, 8110, 8210, 8410, and 9100 Tractors OEM $ 157.43 $ 144.84

SE501124 8200, 8400, 8110, 8210, 8410, and 9100 Tractors John Deere Reman $ 110.18 $ 101.37

A-RE61593 8200, 8400, 8110, 8210, 8410, and 9100 Tractors A&I Products $ 89.15

RE52113 8300 (SN -009999), 8560, and 8570 OEM $ 181.24 $ 166.74

SE501140 8300 (SN -009999), 8560, and 8570 John Deere Reman $ 126.87 $ 116.72

RE48786 6110–6410, 6120–6420, 6215, 6415, 6405, 6603, 6605, 6615–6715, 7210–7810, 7220–7520, 7405, 7425–7525, and 7500–7600 Tractors

OEM $ 116.66 $ 107.33

A-RE48786 6110–6410, 6120–6420, 6215, 6415, 6405, 6603, 6605, 6615–6715, 7210–7810, 7220–7520, 7405, 7425–7525, and 7500–7600 Tractors


RE531436 6120–6420, 6215–6715, 6415, 7220–7520, and 7610–7810 Tractors OEM $ 116.66 $ 107.33

A-RE531436 6120–6420, 6215–6715, 6415, 7220–7520, and 7610–7810 Tractors A&I Products $ 70.72

RE52109 4555–4955, 4560–4960, 7700, 7800, 8100, 8200 (SN -009999) 8560 Tractors OEM $ 181.24 $ 166.74

SE501136 4555–4955, 4560–4960, 7700, 7800, 8100, 8200 (SN -009999) 8560 Tractors John Deere Reman $ 126.87 $ 116.72

A-RE52109 4555–4955, 4560–4960, 7700, 7800, 8100, 8200 (SN -009999) 8560 Tractors A&I Products $ 91.60

RE524361 8120–8520 (SN 217336–_______) OEM $ 524.72 $ 482.74

SE501936 8120–8520 (SN 217336–_______) John Deere Reman $ 367.28 $ 337.90

Genuine John Deere PartsMANUFACTURED SPECIFICALLY

FOR YOUR MACHINE, OEM PARTS ARE YOUR BEST CHOICE FOR

PERFORMANCE AND RELIABILITY.

John Deere Reman PartsA LIKE-NEW SOLUTION AT A LOWER

PRICE. COMPONENTS ARE REPLACED OR REMANUFACTURED TO MEET OUR

OEM SPECIFICATIONS.

A&I and Sunbelt ProductsAN ECONOMICAL REPAIR OPTION,

FOR YOUR OLDER MACHINE OR MIXED FLEET.

49

REPAIR LEVEL DESCRIPTION LIST

Evaluation Charge For all components listed below, the cost to evaluate the repair will only be charged when component can not be repaired, or if customer decides not to complete the recommended repairs.

See Us

Starfire™ 3000

Primary Inspection and Repair Replace damaged dome and base housing with original-equipment John Deere dome and housing. Includes light pipe and decals. Unit will be fully functionally tested.

$ 798.00

Comprehensive Inspection and Repair

Repair all points of failure to hardware within the SF3000 receiver. John Deere original equipment testing, processes, and procedures used to bring SF3000 back to like new condition. Includes electronic components, connectors, cables, and solder reflow.

$1,004.00

*All Repairs Include new Dome and new Lower Housing

Greenstar™ 1800 Display

Complete Repair Repair all hardware failure points within the 1800 Display. John Deere original equipment testing, processes, and procedures used to bring 1800 Display back to like new condition. Includes electronic components, connectors, audio alarm, housings, and solder reflow.

$ 532.00


Complete Repair Repair all hardware failure points within the 2600 Display. John Deere original equipment testing, processes, and procedures used to bring 2600 Display back to like new condition. Includes electronic components, connectors, membrane switch, card reader, audio alarm, touchscreen replacement, housing, and calibration.

$ 682.00


Complete Repair Repair all hardware failure points within the 2630 Display. John Deere original equipment testing, processes, and procedures used to bring 2630 Display back to like new condition. Includes electronic components, connectors, membrane switch, USB cover, audio alarm rear housing, air-gap LCD touchscreen with front housing, bezel assembly, and calibration.

$ 957.00

Brand New. All For You.Introducing Electronics Repair & Return from John DeereSkilled technicians. Quick turnaround. Competitive pricing. It’s what you need when electronics go on the fritz and what you get from Electronics Repair & Return by John Deere Reman.Now available, this convenient service offers you a true John Deere solution for the OEM repair of some of your most important electronic components. And better yet, it’s all backed by a valuable 12-month Limited Warranty** that’s sure to please.Turn to John Deere for electronics repair and be rewarded with fast, reliable service to get your machine up to speed again.

GreenStar™ 3 Display 2630 StarFire™ 3000GreenStar™ 2 Display 2600 GreenStar™ 1800 Display

** The John Deere Reman Electronic Repair & Return 12-month Limited Warranty covers specific repairs on each component as noted on the Service Repair Card received with repaired unit. John Deere Reman will repair or replace unit during the applicable warranty period but is not responsible for any labor costs associated with the removal and installation of the components.

CABRecirculation Air FilterL214634Clean every 250 hours or each season, whichever occurs first, and replace as required.

HYDRAULICReservoir Vent FilterAT101565Replace every 400 hours or each season, whichever occurs first.

ENGINEOpen Crankcase Ventilation (OCV) FilterDZ105796Replace every 1,500 hours.

ENGINEPrimary Air FilterAN403918Secondary Air FilterAN403919Replace each season and as required.

HYDRAULICReturn Filter (Draper)AT318160Replace every 400 hours or each season, whichever occurs first.

ENGINEFuel Filter Kit (Includes Primary and Secondary)RE556406 (Engine Option Code 35D5)Primary Fuel FilterRE551507 (Engine Option Code 35JL, 35K3)Secondary Fuel FilterRE560681 (Engine Option Code 35JL, 35K3)Replace every 500 hours or each season, whichever occurs first.

ENGINEOil FilterRE539279Initial oil and filter change is after 100 hours of operation, then replace every 250 hours or each season, whichever occurs first.

ENGINEDiesel Exhaust Fluid (DEF) Tank Vent FilterH216169Clean every 500 hours or each season, whichever occurs first.

ENGINEFuel Tank Vent FilterH216169Clean every 500 hours or each season, whichever occurs first.

HYDRAULICCharge FilterAH128449 (-420000)T175002 (420001-)Replace every 400 hours or each season, whichever occurs first.

ENGINEDiesel Exhaust Fluid (DEF) Dosing Unit FilterRE554498Replace every 4,500 hours or three years of operation, whichever occurs first.

CABFresh Air FilterRE284091Clean every 50 hours and replace as required.

W235 Final Tier (FT4) WindrowerFilter Maintenance

50 Visit www.John Deere.com/FilterOverviews to find the filter guide for your model.

HAY & FORAGE PARTS

Yield data is now available for hay, thanks to the Bale Mobile app. The One Series Large Square Balers measure moisture and weight for each bale. This app takes that real-time information to a whole new level, whether baling, loading, or in the office managing. The moisture and weight are tagged to the individual bale. If a bale is too wet, the operator can immediately decide whether to apply preservative or even stop baling. Bale Mobile also has the option to tag bales so they can be easily identified when sorting. After baling in a field, a summary will show the crop, number of bales, and average moisture, even if there is more than one baler running. It gives users the option to sort by moisture, weight, whether preservative has been applied. It can also help to load trucks for optimal weight. This documentation can even be shared with landlords and trusted advisors.

Hardware and compatibility requirements:■ One Series Large Square Baler■ Bale Mobile Hardware kit

■ Tractor with StarFire™ receiver■ No subscription fee required

■ iPad Air® 2 or newer tablet iPad is a trademark of Apple Inc.

Bale Mobile App

CABRecirculation Air FilterL214634Clean every 250 hours or each season, whichever occurs first, and replace as required.

HYDRAULICReservoir Vent FilterAT101565Replace every 400 hours or each season, whichever occurs first.

ENGINEOpen Crankcase Ventilation (OCV) FilterDZ105796Replace every 1,500 hours.

ENGINEPrimary Air FilterAN403918Secondary Air FilterAN403919Replace each season and as required.

HYDRAULICReturn Filter (Draper)AT318160Replace every 400 hours or each season, whichever occurs first.

ENGINEFuel Filter Kit (Includes Primary and Secondary)RE556406 (Engine Option Code 35D5)Primary Fuel FilterRE551507 (Engine Option Code 35JL, 35K3)Secondary Fuel FilterRE560681 (Engine Option Code 35JL, 35K3)Replace every 500 hours or each season, whichever occurs first.

ENGINEOil FilterRE539279Initial oil and filter change is after 100 hours of operation, then replace every 250 hours or each season, whichever occurs first.

ENGINEDiesel Exhaust Fluid (DEF) Tank Vent FilterH216169Clean every 500 hours or each season, whichever occurs first.

ENGINEFuel Tank Vent FilterH216169Clean every 500 hours or each season, whichever occurs first.

HYDRAULICCharge FilterAH128449 (-420000)T175002 (420001-)Replace every 400 hours or each season, whichever occurs first.

ENGINEDiesel Exhaust Fluid (DEF) Dosing Unit FilterRE554498Replace every 4,500 hours or three years of operation, whichever occurs first.

CABFresh Air FilterRE284091Clean every 50 hours and replace as required.

W235 Final Tier (FT4) WindrowerFilter Maintenance

HAY & FORAGE PARTS

This wear parts box is available for the L331 and L341 Large Square Balers (LSBs). The wear parts box includes 18 of the most common wear parts needed to keep your baler running during the season. The parts box is an option that can be ordered when configuring the baler or at any time from the Parts Department. Parts come packaged inside a John Deere Job Box that can be used in your truck, shop, or take it to the field. A parts list is included to help you keep track of the parts you need.

NOTE: This is for the One Series LSB only. Many of the parts included are not able to be used on the L330 or L340 model balers.

Large Square Baler Wear Parts Box

BE32697 Large Square Baler Parts Box for L331 and L341 LSBs List Price – $3,078.30 Sale Price – $2,462.64

51

HAY & FORAGE PARTS

52

This newly advanced Hay, Straw, and Silage Tester is the most efficient probe on the market. The 20" stainless steel probe and tip provides accuracy, versatility, and durability. The SW007305 will measure push force to determine whether it’s a high- or low-density bale, then adjusts the moisture result for more precise accuracy.Features:■ Measures 8–72% moisture content ■ Temperature range 32–185°F (0–85°C) ■ Automatic Density Compensation ■ Choice of hay or straw bales, separate mode for silage ■ Memory can store results up to 64 bales with a total of 1,000 savable moisture and

temperature readings■ Continuous reading as you probe bale

Advanced Hay, Straw, and Silage Tester


SW007305 Hay, Straw, and Silage Tester $344.36 $323.70

Hay Probes and Baler Mounted TestersNUMBER DESCRIPTION LIST NOW

Handheld Moisture Testers:

Moisture Testers:

SW16136 18-in. Probe (testing range from 14–44%) $207.77 $195.30


Low-Moisture:


SW007321 10-in. Probe (testing range from 8–44%) $232.79 $218.82Baler-Mounted Hay Testers:

SW07350 Tester mounts inside the baler for direct readout of moisture while baling (testing range from 8–44%)

$315.51 $296.58

SW007360 Advanced Baler-Mounted Hay Moisture Tester (BHT-2) $436.71 $410.51

Now test hay before you even start baling with the portable Windrow Hay Moisture Tester from John Deere. You no longer have to make a bale and use a probe-style tester to determine if your hay is ready. Instead, just add loose hay to a five U.S.-gallon bucket, press the tester into the hay and get a quick, accurate reading. See results in 30 to 60 seconds. Measuring range: 13- to 70-percent moisture. Accuracy range: +/- 2 to 4 percent.

Windrow Hay Moisture Tester


SW07140 Windrow Hay Moisture Tester $323.11 $303.72

53

NUMBER DESCRIPTION/APPLICATION LIST NOW

Wheels and Tires for Tough Conditions:

CX15, HX15, CX20, and HX20

AP41020 Wheel, 16PR Foam-Filled Tire, 21 x 7 x 12-in. $290.66 $261.59

AP41022 Wheel, 24PR Foam-Filled Tire, 26 x 9 x 14.5-in. $521.17 $469.05

Blades:

CX15, HX15, and MX15

FH329908 Suction Blade Center, CCW (order 2) $ 43.28 $ 38.95

FH329915 Suction Blade Right-Hand, CCW (order 2) $ 35.76 $ 32.18

FH329914 Suction Blade Left-Hand, CW (order 2) $ 35.76 $ 32.18

FH329918 Shredding Attachment Upper, CW (order 2) $ 38.12 $ 34.31

FH329919 Shredding Attachment Upper, CCW (order 4) $ 38.12 $ 34.31

FH329914 Shredding Attachment Lower, CW (order 2) $ 35.76 $ 32.18

FH329915 Shredding Attachment Lower, CCW (order 4) $ 35.76 $ 32.18

CX20 and HX20

FH329920 Suction Blade, CW (order 2) $ 43.58 $ 39.22

FH329909 Suction Blade, CCW (order 4) $ 49.34 $ 44.41

FH329918 Shredding Attachment Upper, CW (order 2) $ 38.12 $ 34.31

FH329919 Shredding Attachment Upper, CCW (order 4) $ 38.12 $ 34.31

FH329914 Shredding Attachment Lower, CW (order 2) $ 35.76 $ 32.18

FH329915 Shredding Attachment Lower, CCW (order 4) $ 35.76 $ 32.18 CX15, HX15, MX15, CX20, HX20

John Deere Blades are designed for the toughest conditions—no matter the field you are in.

Making the cut in the field—and in your wallet

53

BEARINGS

54

John Deere Dura-Flex bearings continue to offer superior quality and consistency that is unmatched by aftermarket will-fit bearings. Introduced in 2005, they are used on disk gang assemblies and rolling baskets up to the 2600 series disks.

Dura-Flex Bearing Features: ■ Includes 2-year warranty ■ Built using a ball ridging, one-piece, molded nylon cage for perfect alignment ■ Engineered with a thicker inner bearing race that creates a stronger cross section to withstand tough loads■ Designed with a heavy-duty bearing so the ball is harder than the rings ■ Provides total clearance between rings and rolling elements for optimal load distribution and free rotation to

allow for thermal expansion■ Prevents premature bearing failure with smooth rolling bearings ■ Contains a chamfer in the lubrication hole to ensure proper grease flow

Dura-Flex Bearings

NUMBER DESCRIPTION APPLICATION LIST NOWAA28184 Dura-Flex Bearing Disks: 210, 215, 220, 230, 235, 621, 627, 630, 637 (Rigid

Standards) Seedbed Finisher: 200 Mulch Finishers: 722, 724, 726, 2310, and 2330 Mulch Tillers: 710, 712, and 714 Field Cultivators: 980 and 2210 Air Disk Drill: 730 and 730LL

$24.49 $22.53

AA30941 Dura-Flex Bearing Kit, includes AA28184 bearing, flanges, gasket, bolts, and nuts

Disks: 210, 215, 220, 230, 235, 621, 627, 630, and 637 (Rigid Standards) Mulch Finisher: 712

$38.87 $35.76

AA30942 Dura-Flex Bearing Kit, includes AA28186 bearing, flanges, gasket, bolts, and nuts

Disks: 310, 315, 330, 331, 335, 340, 350, 360, 370, 637 (C-Spring Standards), 640, and 650 Rippers: 510 and 512

$54.99 $50.59

Maintenance-free bearings were introduced with the 2600 series disks. They are used on disk gangs and rolling baskets.Maintenance-Free Bearing Features: ■ Includes 2-year warranty ■ Increases productivity by reducing the amount of required service time ■ Packaged with rust-preventative paper for added protection

Maintenance-Free Bearings

NUMBER DESCRIPTION APPLICATION LIST NOWAKK16196 Maintenance-Free Bearing Disks: 2620, 2623, 2623VT,

and 2625 Rippers: 2720 and 2730

$87.49 $80.49

Features & Benefits: ■ Allows for limited, seasonal maintenance interval to minimize downtime■ Customized bearing maintenance for specific growing conditions and soil types■ The sealing system features improved contamination resistance

Extended Life Greaseable Bearing

NUMBER DESCRIPTION APPLICATION LIST NOWAKK22197 Extended Life Greaseable

BearingDisks: 2600, 2623VT, 2630, 2633VT, and 2660VT Series

$59.96 $55.16

Cot-1

Cotton Parts and Attachments

All John Deere spindles are manufactured in John Deere facilities utilizing next-generation heat treat controls to create the most consistent heat-treated spindles on the market. Plus, 25 unique quality checks at 7 manufacturing points ensure the highest quality product.

For average annual usage and picking conditions, the John Deere PRO Series Spindles offer a reliable value-priced option. For higher annual usage or harsh picking conditions, Pro-XL™ Spindles offer up to 50 percent longer life than the John Deere PRO Series Spindles.

Individual spindles and convenient spindle assemblies are now available for both PRO and Pro-XL spindles … take your pick.

Take Your Pick

■ John Deere controls the entire manufacturing process including heat treatment, chroming, and quality inspections

■ A unique data matrix on each spindle ensures quality control, consistency, and traceability

■ Three sets of 12 barbs per flute for efficient picking■ Case hardening ensures the spindles will break and not bend when striking solid

objects to minimize damage to the picking units■ Chrome-nickel plating for long life

Spindles

NUMBER STYLE APPLICATION LIST NOW

PRO:

KK40195 Right-hand All John Deere cotton pickers $4.88 $4.49

N190333 Left-hand All John Deere cotton pickers $5.57 $5.12

PRO-XL:

KK28390 Right-hand All John Deere cotton pickers $5.44 $5.00

Replacing worn spindles cuts the chance of stripping drive gears and damaging the picker bar. Reduce downtime by using the all-in-one, factory-made spindle assembly.

Spindle Assembly


PRO:

AKK24309 Right-hand All John Deere cotton pickers $7.76 $7.14

PRO-XL:

AKK18840 Right-hand All John Deere cotton pickers $8.71 $8.01

COTTON HARVESTING PARTS

Cot-2

John Deere cotton pickers use hardened spindles with razor-sharp barbs rotating at high rpm. But these spindles don’t work in isolation. When needed, replace the driveshaft assembly with a factory-assembled shaft.

Spindle Driveshaft Assembly

NUMBER DESCRIPTION APPLICATION LIST NOWAN276743 18 Spindle, PRO-SERIES™ 9970 cotton pickers and

PRO-12 VRS$165.16 $151.95

AN276737 20 Spindle 9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$212.09 $195.12

Even a bit of wear or a tiny bend reduces performance. That’s why John Deere offers precisely machined components for precision performance, longer life, quick field replacement, reduced downtime, and smooth and quiet operation.

Picker Bars and Assemblies


Bar Assembly:

AN276740 18 Spindle 9970 cotton pickers and PRO-12 VRS

$ 994.31 $914.77

AN276734 20 Spindle 9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$1,000.82 $920.75

Bar with Bushing and Sleeve:

AN274501 Right-hand 9970 cotton pickers $ 162.45 $149.45

AN273434 Right-hand 9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$ 165.72 $152.46

Save time with ready-to-use, spindle-nut assemblies. No more need to press the bushings into the nut.

Spindle-Nut Assembly


AN111948 Right-hand All John Deere cotton pickers $4.27 $3.93

AN111949 Left-hand All John Deere cotton pickers $4.31 $3.97

Even the smallest parts of your cotton picker are designed to the highest quality standards.

Spindle Drive Components

NUMBER STYLE APPLICATION LIST NOWL2456N Bevel Drive Gear All John Deere cotton pickers

(except 9970, 9986, 9996, 7660, 7760, and CP690)

$ 3.54 $ 3.26

N371626 Bevel Drive Gear 9970, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$ 3.42 $ 3.15

JD8804 Needle Bearing All John Deere cotton pickers $ 1.39 $ 1.28N278037 Shaft for 18 Spindles All John Deere cotton pickers

(except 9970, 9986, 9996, 7660, 7760, and CP690)

$36.25 $33.35

N371720 Shaft for 18 Spindles 9970, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$36.61 $33.68

N275212 Shaft for 20 Spindles 9965 and 9976 cotton pickers $44.25 $40.71N371572 Shaft for 20 Spindles 9986, 9996, 7660, 7760, and

CP690 cotton pickers$44.93 $41.34

N118289 14T Gear All John Deere cotton pickers $10.94 $10.06


Cot-3

John Deere urethane doffers greatly reduce contamination and offer increased wear life. They’re specially designed for balanced, smooth operation—even at high speeds. Our doffers are precision engineered to reduce the need for grinding or shimming and are heat- and oil-resistant. Save time with ready-to-install doffer assemblies straight from the factory!

Doffers, Doffer Parts, and Doffer Assemblies

NUMBER DESCRIPTION MODEL LIST NOWAN406038 Urethane Doffer CP690 cotton pickers

(hollow-core shaft)$ 11.36 $ 10.45

AN272152 Urethane Doffer Cotton pickers including 9986, 9996, 7660, and 7760 (solid shaft)

$ 12.30 $ 11.32

AN273953 Column Housing All John Deere cotton pickers $ 68.82 $ 63.31JD10123 Shaft Ball Bearing John Deere cotton pickers

(except 9970, 9976, 9986, 9996, 7660, 7760, and CP690)

$ 16.85 $ 15.50

L3197N Shim All John Deere cotton pickers $ 0.67 $ 0.62

Assembly with Urethane Doffers:

AN274508 Doffer Assembly Pro 12 and Pro 12 VRS row units

$708.24 $651.58

AKK17562 Doffer Assembly Cotton pickers including 9986, 9996, 7660, 7760, and CP690 (Pro-16 row units)

$774.06 $712.14

These specially designed pads feature an X pattern to ensure proper moisture distribution on picking spindles operating in all types of conditions. Precise fins provide an even flow of cleaner from the pad to the spindle, ensuring optimum picking performance. Pads are made of long-lasting urethane. A tight fit keeps debris from plugging the moistener system or tearing the pad off during harvest.

Moistener Pads


N275607 Urethane Moistener Pad $2.45 $2.25

Our pressure plates, pressure plate extensions, and scrapping plates provide a profile that will keep the cotton plant in the picking zone longer, giving the spindle more opportunity to harvest the cotton off the plant.

Pressure and Scrapping Plates

NUMBER DESCRIPTION APPLICATION LIST NOWPressure Doors:

AN279557 Pressure Door, PRO-12™ Units, Front and Rear (2 per row)

9970 cotton pickers and PRO-12 VRS

$350.33 $322.30

AN279558 Pressure Door, PRO-16™ Units, Front (1 per row)

9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$384.54 $353.78

Pressure Plate Extensions:

N278127 Extension, Pressure Plate, PRO-12 (2 per row)

9970 cotton pickers and PRO-12 VRS

$ 63.53 $ 58.45

N274103 Extension, Pressure Plate, PRO-16 (2 per row)

9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$ 65.30 $ 60.08

Scrapping Plates:

N372970 Scrapping Plate (10 spindle), PRO-12 (2 per row), PRO-16 (4 per row)

9970, 9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$ 70.31 $ 64.69

N372971 Scrapping Plate (4 spindle), PRO-12 (4 per row)

9970, 7660, 7760, and CP690 cotton pickers and PRO-12 VRS

$ 44.55 $ 40.99


Cot-4

Essential lubricantsJohn Deere Spindle Cleaner and Grease boost your harvesting performance and reduce your operating and maintenance costs.

■ Spindle Cleaner Spindle Cleaner protects your cotton picker’s mechanical parts from rust, oxidation,

and corrosion—yet it won’t wash spindle grease off bushings and attachments.

■ Spindle Grease John Deere Spindle Grease is an all-in-one, lithium-based lubricating grease, gear

lubricant, penetrating oil, and corrosion protector. It reduces the amount of wear from metal-to-metal contact in your picker head, and it extends the service life of high-wear parts.

Call us today to learn more.

Spindle Grease and CleanerNUMBER DESCRIPTION

Spindle Grease

AN113719 30-lb.

AN31360 120-lb.

TY25845 2,000-lb.

Spindle Cleaner

AN114022 5 Gallon

AN114023 55 Gallon

See us for pricing.

Round Module Builder (RMB) BeltsNUMBER DESCRIPTION APPLICATION LIST NOW

A-1012095 Narrow Belt – 5 used 7760, CP690, CS690 $ 602.01

AN373217 Narrow Belt – 5 used 7760, CP690, CS690 $ 841.00 $ 773.72

A-1012096 Wide Belt – 6 used 7760, CP690, CS690 $ 775.32

AKK23004 Wide Belt – 6 used 7760, CP690, CS690 $1,118.07 $1,028.62

TRANSMISSIONLube Pump FilterLVA10419Replace every 400 hours.

HYDRAULICSSpin-On FilterLVA10419 (P.I.N. -39000)AH128449 (P.I.N. 39001-)Replace every 400 hours.

HYDRAULICSPump Drive Gearbox FilterLVA10419Replace initially after 100 hours, then every 400 hours.

CABFresh Air FilterAH115833Clean or replace every 100 hours or as required.

HYDRAULICSPrimary Hydraulic FilterRE210857Replace every 400 hours.

PICKING UNITLubrication System FiltersAN192848Replace (2) every 250 hours.

HYDRAULICSPropel System FilterAN373366Replace every 400 hours.

ENGINEOil FilterRE572785Replace after first 100 hours, then every 250 hours. If Plus-50™ oil is used, along with a John Deere oil filter, the oil change interval may be extended by 50 percent. For example, 250 hours extends to 375 hours.

ENGINEPrimary Air FilterAH212294 (P.I.N. -39000)AH222225 (P.I.N. 39001-)Replace every year and as required.

ENGINESecondary Air FilterAH212295Replace every year and as required.

CABRecirculation Air FilterH220870Clean or replace every 200 hours or as required.

TIER 2 AND 3 ENGINEPrimary Fuel FilterRE532952Secondary Fuel FilterRE533910Replace every 400 hours.

iT4 ENGINEPrimary Fuel FilterRE539465Secondary Fuel FilterRE533910

HYDRAULICSUnit Drive FilterAH128449Replace every 400 hours.

7760 Cotton PickerFilter Overview with Service Intervals

Visit www.JohnDeere.com/FilterOverviews to find the filter guide for your model. Cot-5


Cot-6

Stalklifter rods allow you to harvest low-hanging bolls more easily by improving the row unit’s lifting action.

Stalklifter Rods

NUMBER MODEL LIST NOW

BN272534 PRO-12, PRO-16, VRS Units $407.00 $374.44

Harvest Identification, Cotton Pro is the next generation of round module tracking. Features include the documentation of module moisture, weight, editable features, and other features. Cotton module weighing provides on-the-go cotton module weights to the cab display that enables easier yield monitor calibration for more accurate harvest yield data and agronomic decisions. Cotton module moisture sensor provides a vital role in preserving cotton quality and maintain high quality standards.

Harvest Identification, Cotton Pro


Harvest Identification, Cotton Pro – CP690 and CS690 (MY17+):

BKK10642 Cotton Pro Kit (RFID reader) $4,840.00 $4,452.80

Cotton Module Weighing – CP690 and CS690 (MY15–16):

AKK25966 Cotton Module Weighing Kit $3,900.00 $3,588.00

Cotton Moisture Sensor – CP690 and CS690 (MY15–16):

AKK25968 Moisture Sensor Kit $3,100.00 $2,852.00

Mud scrapers may be installed to help clean drive tires in muddy conditions.

Mud Scrapers


KK24399 7760, CP690, CS690 $360.04 $331.24

KK24400 7760, CP690, CS690 $376.00 $345.92

N380682 7760, CP690, CS690 $ 71.92 $ 66.17

N380870 7760, CP690, CS690 $249.42 $229.47

Proper adjustment of the cotton feeder belt is critical for performance and reliability of the round module cotton harvester. If the feeder belt tension is set too loose, the belt can slip. If it is set too tight, damage to the lace and/or belt can occur. The spring tension feeder belt kit makes it easier to properly set the feeder belt tension during machine operation.

Spring Tension Feeder Belt Kit


AKK21021 7760, CP690, CS690 $3,728.93 $3,430.62

The CP690 offers an optional active rotating belt cleaning brush that provides improved RMB belt cleaning in tougher, higher-moisture harvesting conditions.

Active RMB Belt Cleaning Brush


BKK10319 CP690, CS690 $3,060.20 $2,815.38

Scrapping plates boost harvest efficiency by pushing cotton further into the spindle picking zone.

Scrapping Plates


BN272408 PRO-16 Units $310.20 $285.38


Cot-7

Worn bats and brushes leave more cotton in the field and less in your module. To ensure peak harvesting efficiency, you’ll want to monitor their condition and replace worn components. John Deere cotton stripper bats and brushes are manufactured from the highest quality raw materials. Their steel channels are electro-galvanized to prevent rust. Finally, products are thoroughly inspected to ensure quality.

Cotton Stripper Bats and Brushes

NUMBER DESCRIPTION LENGTH LIST NOW

Bats:

AN123046 1-Ply Bat 40" $12.36 $11.37

AN122821 1-Ply Bat 40" $ 9.65 $ 8.88

Row Unit Brushes:

AN50702 Stripper Brush 10" $ 2.35 $ 2.16



AN220018 Mud Brush 40" $ 7.85 $ 7.22

Cleaner Brushes:

AN221023 Doffer Brush – 2" trim 59.25" $12.81 $11.79

AN221813 Doffer Brush – 17/8" trim 59.25" $12.19 $11.21AN221683 Notched Reclaimer

(landlord brush)59.375" $37.56 $34.56

AN123628 3" Burr Reclaimer 59.5" $41.28 $37.98

AN123721 Doffer Brush 59.5" $10.16 $ 9.35

AN220747 Burr Reclaimer (fire brush) 59.5" $37.56 $34.56

AKK11599 Brush CS690 Cleaner Air Duct 11" $ 2.35 $ 2.16

AKK11600 Brush CS690 Cleaner Air Brush 20" $ 6.19 $ 5.69

Whiskers:

AN122263 Cat Whisker 9" $ 4.45 $ 4.09

AN221395 Cat Whisker w/o Notches 9" $ 4.39 $ 4.04

AN123821 Cat Whisker 22" $12.12 $11.15

AN273317 Cat Whisker w/o Notches 37.5" $15.25 $14.03

AN220022 Cat Whisker w/o Notches 48" $24.71 $22.73

AN221228 Cat Whisker w/o Notches 52" $29.33 $26.98

John Deere saw blades feature a consistent tooth profile spacing for even cleaning and rugged performance. Saw blades are heat-treated for excellent tooth rigidity and long life.

Cotton Stripper Saw Blades and Drums


Saw Blades:

N221590 Regular Tooth $ 4.17 $3.84

PMF969534 Regular Tooth $ 1.68

PMBCS705 Deep Tooth $ 1.68

Complete Saw Drum Assembly:

AN220732 7445, 7450, 7455, 7460 $1,714.81

AN405199 CS690 $1,714.81

Just about everything. That’s what you get with a COTTON HARVESTER INSPECTION from your John Deere dealer. Providing more than 100 checkpoints, our comprehensive service will help you experience a more successful harvest. We’ll inspect the 15 primary areas of your machine, including:

■ Operator’s Station ■ Fuel System ■ Fluids ■ Steering & Brakes ■ Engine ■ Cooling System ■ Electrical ■ Hydraulic System

■ Accumulator■ Feeder■ On-Board Module Builder■ Wrap System & Handler■ Moistener System■ Air System■ Row Unit Attachments

Schedule your cotton harvester inspection with us today!

Inspections Include The Kit And

The Caboodle

Cot-8 FH-1

Windrow Pickups Parts and Attachments

Pickup TeethNUMBER DESCRIPTION LIST NOW

630A, 640A, 645A, 630B, 640B, 645B

CC25176 Teeth $5.04 $4.64

639 Standard Pickup

LCA105173 Teeth – Standard $3.59 $3.30

639, 649, 659 Premium Pickup

LCA108554 Teeth – Premium $4.75 $4.37

Pickup StrippersNUMBER DESCRIPTION LIST NOW

630A, 640A, 645A (-052096)

E65648 Stripper $53.28 $49.02

630A, 640A, 645A (052097-)

FH311772 Stripper $37.85 $34.82

630B, 640B, 645B

FH311772 Stripper $37.85 $34.82

639, 649, 659

LCA104898 Stripper $28.40 $26.13

Cam, Cam Arm, Cam FollowerNUMBER DESCRIPTION LIST NOW

630A, 640A, 645A

CC44956 Cam, LH $215.32 $198.09

CC44955 Cam, RH $215.34 $198.11

AE46215 Cam Follower/Bearing $ 23.85 $ 21.94

DC49039 Cam Arm $ 73.32 $ 67.45

DC49040 Cam Arm $ 68.94 $ 63.42

630B, 640B, 645B

CC44956 Cam, LH $215.32 $198.09

CC44955 Cam, RH $215.34 $198.11

AE46215 Cam Follower/Bearing $ 23.85 $ 21.94

DC49039 Cam Arm (-106600) $ 73.32 $ 67.45

DC49040 Cam Arm (-106600) $ 68.94 $ 63.42

DC55145 Cam Arm, LH (106601-) $ 81.49 $ 74.97

639 Standard Pickup

CC44956 Cam, LH $215.32 $198.09

CC44955 Cam, RH $215.34 $198.11

AFH204000 Cam Follower/Bearing $ 27.82 $ 25.59

LCA108783 Cam Arm $ 80.90 $ 74.43

639, 649, 659 Premium Pickup

FH316226 Cam, LH $357.53 $328.93

FH316225 Cam, RH $357.53 $328.93

LCA108964 Cam Arm w/Bearing $142.09 $130.72

LCA108965 Cam Arm w/Bearing $142.09 $130.72

FH-2

Rotary Harvesting Parts and Attachments

These service sets include all blades, scrapers, special bolts, and nuts. Number required to cover complete header is listed below. Heavy duty kits include tungsten carbide coated blades, which lasts three times longer.

Rotary Knife Kits

NUMBER DESCRIPTION NUMBER REQUIRED LIST NOW

676

LCA109994 Heavy Duty – Small Drum 1 $ 440.09 $404.88

LCA109995 Heavy Duty – Large Drum 1 $ 749.33 $689.38

696

LCA78553 Standard 3 $ 390.70 $359.44

LCA79040 Heavy Duty 3 $ 564.52 $519.36

698

LCA78553 Standard 4 $ 390.70 $359.44

LCA79040 Heavy Duty 4 $ 564.52 $519.36

699

LCA78553 Standard 5 $ 390.70 $359.44

LCA79040 Heavy Duty 5 $ 564.52 $519.36

692

LCA78553 Standard 6 $ 390.70 $359.44

LCA79040 Heavy Duty 6 $ 564.52 $519.36

778

LCA89941 Standard 2 $ 771.31 $709.61

LCA79040 Heavy Duty 2 $ 564.52 $519.36

770

LCA89941 Standard 2 $ 771.31 $709.61

LCA78553 Standard 1 $ 390.70 $359.44

LCA89940 Heavy Duty 2 $1,039.60 $956.43

LCA79040 Heavy Duty 2 $ 564.52 $519.36

High performance scrapers with convenient bolt-on design, allows you to use each side of scraper, saving maintenance costs.

Scrapers for Rotary Headers


676

LCA69794 Weld-On $ 7.03 $ 6.47

684, 686, 688, 710

LCA87284 Bolt-On Set $77.55 $71.35

Points


676, 678, 684, 686, 688, 690, 692, 696, 698, 710, 770, 772, 778

LCA90654 Clockwise Rotation $5.24 $4.82

LCA90655 Counterclockwise Rotation $5.24 $4.82

If you notice teeth are blunt or damaged, replace with new points. Points must be installed in pairs on opposite sides of the drum.

FH-3

7000 Series SPFH Parts and Attachments

John Deere feed rolls, wear strips, and bolts are made from heavy-duty, induction hardened stainless steel, which helps to minimize potential downtime. They are also demagnetized to prevent them from false tripping the metal detection system.

Feeding Parts – 7000 Series


7200, 7300, 7400, 7500, 7250, 7350, 7450, 7550, 7180, 7280, 7380, 7480, 7580

Upper Front Feed Roll:

AZ102096 Feed Roll with Replaceable Wear Strips $1,932.91 $1,778.28

HXE64649 Wear Strip – Corn $ 76.52 $ 70.40

HXE64652 Wear Strip – Grass $ 147.04 $ 135.28

Z81671 Shaft $ 445.55 $ 409.91

JD10071 Needle Bearing $ 19.79 $ 18.21

AZ62417 Needle Bearing $ 21.52 $ 19.80

AL28870 Seal $ 16.69 $ 15.35

Upper Rear Feed Roll:

AZ71834 Feed Roll $ 861.40 $ 792.49

HXE26048 Shaft $ 205.40 $ 188.97

JD10458 Bearing $ 51.75 $ 47.61

Lower Feed Roll:

AZ101149 Feed Roll $1,390.94 $1,279.66

Z77138 Shaft (783 MM) $ 524.53 $ 482.57

HXE32390 Shaft (728 MM) $ 306.30 $ 281.80

AZ51405 RH Bearing $ 72.81 $ 66.99

AXE10405 LH Outside Bearing $ 71.39 $ 65.68

JD9467 LH Inside Bearing $ 17.54 $ 16.14

7700, 7800, 7750, 7850, 7950, 7780, 7980

Upper Front Feed Roll:

AZ101738 Feed Roll with Replaceable Wear Strips (7700/7800) $3,622.40 $3,332.61AZ103444 Feed Roll with Replaceable Wear Strips (7750, 7850, 7950,

7780, 7980)$3,269.57 $3,008.00

HXE64650 Wear Strip – Corn $ 95.28 $ 87.66

HXE64653 Wear Strip – Grass $ 162.98 $ 149.94

Z81672 Shaft $ 489.52 $ 450.36

JD10071 Needle Bearing $ 19.79 $ 18.21

AZ62417 Needle Bearing $ 21.52 $ 19.80

AL28870 Seal $ 16.69 $ 15.35

Upper Rear Feed Roll:

AZ71837 Feed Roll $1,185.96 $1,091.08

HXE26049 Shaft $ 256.76 $ 236.22

JD10458 Bearing $ 51.75 $ 47.61

Lower Feed Roll:

AZ101150 Feed Roll $2,212.75 $2,035.73

Z72358 Shaft (903 MM) $ 221.18 $ 203.49

Z102377 Shaft (848 MM) $ 574.66 $ 528.69

AZ51405 RH Bearing $ 72.81 $ 66.99

AXE10405 LH Outside Bearing $ 71.39 $ 65.68

JD9467 LH Inside Bearing $ 17.54 $ 16.14

FORAGE HARVESTER PARTS

FH-4

Cutting Parts – 7000 SeriesNUMBER DESCRIPTION LIST NOW

7200, 7300, 7400, 7500, 7250, 7350, 7450, 7550, 7180, 7280, 7380, 7480, 7580

Knives and Mounting Parts:

Z63136 Corn Knife $ 25.42 $ 23.39

Z62075 Corn Knife, Angled, Right-Hand $ 28.72 $ 26.42

Z62076 Corn Knife, Angled, Left-Hand $ 28.72 $ 26.42

Z69500 Grass Knife $ 23.10 $ 21.25

Z102741 Grass Knife, Dura Line™ Coated $ 30.04 $ 27.64

Z69650 Knife Bolt $ 2.75 $ 2.53

Z60535 Cover Plate $ 11.13 $ 10.24

HXE121397 Thread Bar $ 9.64 $ 8.87

Z101528 Knife Bracket $ 15.88 $ 14.61

Shearbars/Stationary Knife:

AZ53906 Corn $ 562.64 $ 517.63

AZ103112 Grass $ 562.64 $ 517.63

AZ57685 All Crop, Heavy-Duty $1,160.19 $1,067.37

AXE37631 All Crop, Dura Line Plus $1,687.94 $1,552.90

7700, 7800, 7750, 7850, 7950, 7780, 7980

Knives and Mounting Parts:

Z72500 Corn Knife $ 28.24 $ 25.98

Z81123 Grass Knife $ 25.67 $ 23.62

Z103040 Grass Knife, Dura Line™ Coated $ 33.37 $ 30.70

Z69650 Knife Bolt $ 2.75 $ 2.53

Z76801 Cover Plate $ 11.28 $ 10.38

HXE121393 Thread Bar $ 44.70 $ 41.12

Z101529 Knife Bracket $ 104.27 $ 95.93

Shearbars/Stationary Knife:

AZ64735 Corn $ 664.94 $ 611.74

AZ103113 Grass $ 664.94 $ 611.74

AZ64737 All Crop, Heavy-Duty $1,440.25 $1,325.03

AXE37632 All Crop, Dura Line Plus $1,994.84 $1,835.25

7000, 7050, 7080 Series

Sharpening Stone:

AZ56626 Stone $ 91.73 $ 84.39

Knives

Shearbar

Crop Flow Parts – 7000 SeriesNUMBER DESCRIPTION LIST NOW

7200, 7300, 7400, 7500, 7250, 7350, 7450, 7550, 7180, 7280, 7380, 7480, 7580

Spiral Band:

AXE40436 Standard $ 352.40 $ 324.21

AXE40438 Dura Line™ $1,174.69 $1,080.71

Grass Chute:

AZ65662 Grass Chute, Bottom $ 235.88 $ 217.01

Z78611 Stainless Steel Wear Liner $ 219.61 $ 202.04

7700, 7800, 7750, 7850, 7950, 7780, 7980

Spiral Band:

AXE40437 Standard $ 513.55 $ 472.47

AXE40439 Dura Line™ $1,281.67 $1,179.14

Grass Chute:

AZ65663 Grass Chute, Bottom $ 284.40 $ 261.65

Z78792 Stainless Steel Wear Liner $ 209.67 $ 192.90

Spiral Band


FH-5

Blower Parts – 7000 SeriesNUMBER TYPE DESCRIPTION LIST NOW

7200, 7300, 7400, 7500, 7250, 7350, 7450, 7550, 7180, 7280, 7380, 7480, 7580

HXE29868 Paddles Straight – Normal Conditions (10 used) $ 28.25 $ 25.99

HXE34827 Paddles Serrated – Gummy Conditions (5 used) $ 36.12 $ 33.23


Z67028 Blower Band Standard $ 103.52 $ 95.24

Z105384 Blower Band Dura Line™ $ 719.55 $661.99

7700, 7800, 7750, 7850, 7950, 7780, 7980

HXE29814 Paddles Straight – Normal Conditions (10 used) $ 32.28 $ 29.70



Z73473 Blower Band Standard $ 213.91 $196.80

Z105386 Blower Band Dura Line™ $1,029.49 $947.13

Blower Band

Transition Chute Parts – 7000 SeriesNUMBER TYPE DESCRIPTION LIST NOW

7200, 7300, 7400, 7500, 7250, 7350, 7450, 7550, 7180, 7280, 7380, 7480, 7580

AZ104287 Transition Chute Chute $1,885.61 $1,734.76

AZ104286 Transition Liners Wear Plate Kit $ 374.13 $ 344.20

7700, 7800, 7750, 7850, 7950, 7780, 7980

AXE25702 Transition Chute Chute $2,255.85 $2,075.38

AZ104208 Transition Liners Front Wear Plate Kit $ 383.60 $ 352.91

AZ104209 Transition Liners Rear Wear Plate Kit $ 346.73 $ 318.99

Spout Parts – 7000 SeriesNUMBER TYPE DESCRIPTION LIST NOW

7000, 7050, 7080 Series

AZ104282 High-Arc Spout Spout without Wear Liners $3,996.87 $3,677.12

AZ104285 High-Arc Spout Spout Extension – Standard $ 234.01 $ 215.29

BZ100238 High-Arc Spout Spout Extension – 8-Row $ 896.50 $ 824.78

BZ100239 High-Arc Spout Spout Extension – 10-Row $1,736.90 $1,597.95

AZ103510 High-Arc Spout Wear Liner – Bottom (848 MM) $ 175.49 $ 161.45

AZ102629 High-Arc Spout Wear Liner – Bottom (Dura Line™) $ 486.18 $ 447.29

AZ103381 High-Arc Spout Wear Liner – Middle (1,800 MM) $ 170.34 $ 156.71

AZ103382 High-Arc Spout Wear Liner – Middle (1,800 MM) w/NIR $ 217.54 $ 200.14

AZ101740 High-Arc Spout Wear Liner – Middle (2,000 MM) w/NIR $ 233.97 $ 215.25

AZ54609 High-Arc Spout Wear Liner – Top $ 112.79 $ 103.77

AZ101238 Low-Arc Spout Spout – Bottom $4,129.22 $3,798.88

AZ101239 Low-Arc Spout Spout – Middle $1,586.00 $1,459.12

AZ101240 Low-Arc Spout Spout – Top $ 755.70 $ 695.24

Z68680 Flaps Wear Liner – Bottom $ 134.30 $ 123.56

Z105385 Flaps Wear Liner – Bottom (Dura Line™) $ 775.58 $ 713.53

Z105390 Flaps Wear Liner – Bottom (Dura Line™) w/NIR $ 775.58 $ 713.53

AZ54380 Flaps Middle Flap $ 89.10 $ 81.97

AZ100715 Flaps Middle Flap (Dura Line™) $ 559.04 $ 514.32

AZ53234 Flaps End Flap $ 88.46 $ 81.38

AZ100714 Flaps End Flap (Dura Line™) $ 536.06 $ 493.18 End Flap

Middle Flap

Wear Liner Bottom

FH-6

8000 Series SPFH Parts and Attachments

On both front feed rolls (upper and lower) each wear bar is reversible (straight or serrated edge) so you can adjust the aggressiveness of crop feeding.

Feeding Parts – 8000/9000 Series

NUMBER TYPE DESCRIPTION LIST NOW8100, 8200, 8300, 8400, 8500AXE49885 Upper Front Feed Roll Feed Roll $3,315.79 $3,050.53HXE93580 Upper Front Feed Roll Steel Wear Strip $ 132.04 $ 121.48HXE87701 Upper Front Feed Roll Plastic Strip $ 24.87 $ 22.88AXE56441 Lower Front Feed Roll Feed Roll $2,853.82 $2,625.51HXE100098 Lower Front Feed Roll Steel Wear Strip $ 132.04 $ 121.48AXE66457 Upper Front Feed Roll Feed Roll (-516999) $ 586.00 $ 539.12AXE66457 Upper Front Feed Roll Feed Roll (517000-) $ 586.00 $ 539.12AXE14074 Lower Front Feed Roll Feed Roll $ 575.82 $ 529.758600, 8700, 8800, 9600, 9700, 9800, 9900AXE49638 Upper Front Feed Roll Feed Roll $3,429.76 $3,155.38HXE93575 Upper Front Feed Roll Steel Wear Strip $ 132.04 $ 121.48HXE87459 Upper Front Feed Roll Plastic Strip $ 51.28 $ 47.18AXE56440 Lower Front Feed Roll Feed Roll $3,412.31 $3,139.33HXE100097 Lower Front Feed Roll Steel Wear Strip $ 117.37 $ 107.98AXE66456 Upper Rear Feed Roll Feed Roll (-516999) $ 722.06 $ 664.30AXE66456 Upper Rear Feed Roll Feed Roll (517000-) $ 722.06 $ 664.30AXE14946 Lower Rear Feed Roll Feed Roll $ 662.72 $ 609.708000, 9000 SeriesHXE87510 Feed Roll Wear Strips Hardware Upper Strip Screw $ 2.05 $ 1.89Z74127 Feed Roll Wear Strips Hardware Lower Strip Screw $ 1.40 $ 1.29Z74128 Feed Roll Wear Strips Hardware Nut $ 1.83 $ 1.68

Cutting Parts – 8000/9000 SeriesNUMBER TYPE DESCRIPTION LIST NOW8100, 8200, 8300, 8400, 8500HXE53570 Knives and Mounting Parts Corn Knife $ 29.15 $ 26.82HXE53568 Knives and Mounting Parts Grass Knife $ 26.51 $ 24.39HXE143972 Knives and Mounting Parts Knife Bolt $ 4.14 $ 3.81HXE120441 Knives and Mounting Parts Cover Plate $ 22.27 $ 20.49HXE121397 Knives and Mounting Parts Thread Bar $ 9.64 $ 8.87HXE53563 Knives and Mounting Parts Knife Bracket $ 92.21 $ 84.83HXE101352 Shearbars / Stationary Knife Corn $ 562.64 $ 517.63HXE101351 Shearbars / Stationary Knife Grass $ 562.64 $ 517.63HXE142410 Shearbars / Stationary Knife All Crop, Dura Line Plus $2,483.73 $2,285.038600, 8700, 8800, 9600, 9700, 9800, 9900HXE52950 Knives and Mounting Parts Corn Knife $ 32.39 $ 29.80HXE52933 Knives and Mounting Parts Grass Knife $ 29.45 $ 27.09HXE143972 Knives and Mounting Parts Knife Bolt $ 4.14 $ 3.81HXE119923 Knives and Mounting Parts Cover Plate $ 15.60 $ 14.35HXE121393 Knives and Mounting Parts Thread Bar $ 44.70 $ 41.12HXE52928 Knives and Mounting Parts Knife Bracket $ 97.19 $ 89.41HXE142408 Shearbars / Stationary Knife Corn Knife $ 966.91 $ 889.56HXE101349 Shearbars / Stationary Knife Grass Knife $ 664.94 $ 611.74HXE142411 Shearbars / Stationary Knife All Crop, Dura Line Plus $3,216.58 $2,959.258000, 9000 SeriesAXE17437 Sharpening Stone Stone $ 115.18 $ 105.97


FH-7

Blower Parts – 8000/9000 SeriesNUMBER DESCRIPTION LIST NOW

8100, 8200, 8300, 8400, 8500, 8600

Paddles:

HXE37067 Straight – Normal Conditions (10 used) $ 28.61 $ 26.32

HXE34827 Serrated – Gummy Conditions (5 used) $ 36.12 $ 33.23


Blower Band:

AXE41235 Standard $ 532.09 $ 489.52

AXE42112 Dura Line™ $2,131.96 $1,961.40

8600, 8700, 8800

Paddles:

HXE29814 Straight – Normal Conditions (10 used) $ 32.28 $ 29.70



Blower Band:

AXE35811 Standard $ 620.68 $ 571.03

AXE42114 Dura Line™ $2,486.79 $2,287.85

Blower Band

Spout Parts – 8000/9000 SeriesNUMBER DESCRIPTION LIST NOW

8000, 9000 Series

High-Arc Spout:

BXE11033 Spout Extension – 10-Row $4,084.30 $3,757.56

BXE11098 Spout Extension – 12-Row $5,656.63 $5,204.10

HXE43969 Wear Liner – Bottom $ 222.57 $ 204.76

HXE47058 Wear Liner – Bottom (Dura Line™) $1,035.27 $ 952.45

AXE25517 Wear Liner – Middle $ 150.78 $ 138.72

HXE39391 Wear Liner – Top $ 219.30 $ 201.76

Low-Arc Spout:

AXE75118 Spout – Bottom $7,272.36 $6,690.57

AZ101239 Spout – Middle $1,586.00 $1,459.12

AZ101240 Spout – Top $ 755.70 $ 695.24

AXE48208 Wear Liner – Bottom $ 334.00 $ 307.28

AXE49258 Wear Liner – Bottom (Dura Line™) $ 960.30 $ 883.48

AXE45366 Wear Liner – Top $ 263.09 $ 242.04

Middle Spout:

AXE28058 Wear Liner $ 103.04 $ 94.80

AXE29779 Wear Liner (Dura Line™) $ 104.99 $ 96.59

Flaps:

AXE52630 Middle Flap $ 339.66 $ 312.49

AXE55603 Middle Flap (Dura Line™) $2,109.94 $1,941.14

AXE68374 End Flap $ 573.21 $ 527.35

AXE68375 End Flap (Dura Line™) $3,076.23 $2,830.13

End Flap

Middle Flap

Wear Liner Bottom

FH-8

Kernel Processor Rolls

Cutting section

The John Deere kernel processor is induction-hardened rather than flame-hardened, like many competitors’ rolls. What does that mean to you? Hardening is much more consistent, resulting in a longer life and fewer repair costs. The hardening zones of a John Deere roll are shown in the illustration to the right.

Type Standard Saw Tooth Standard Saw Tooth Chrome Saw Tooth Whole Crop Triangle Milo

Application Standard corn condition Corn – provides higher aggressiveness

Corn – provides increased lifetime due to the hard chroming

All whole crop application

Alkalage and milo

Gap Recommendation 2.5–3mm 2.5–3mm 2.5–3mm 0.5–1mm 0.5–1mm

Different Speed 21% 21% 21% 32% 32%

Kernel Processor RollsNUMBER DESCRIPTION APPLICATION LIST NOW

Standard Triangle:

AZ102631 2 Needed 7200–7500, 7250–7550, 7180–7580 $1,483.34 $1,364.67

AZ102632 2 Needed 7700–7800, 7750–7950, 7780–7980 $1,739.09 $1,599.96

AXE43638 2 Needed 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,564.00

AXE43491 2 Needed 8600, 8700, 8800 $1,800.00 $1,656.00

Saw Tooth Standard:

AZ101800 2 Needed 7200–7500, 7250–7550, 7180–7580 $1,483.34 $1,364.67

AZ102602 2 Needed 7700–7800, 7750–7950, 7780–7980 $1,739.09 $1,599.96

AXE43571 Front Roll 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,564.00

AXE43572 Rear Roll 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,564.00

AXE43163 Front Roll 8600, 8700, 8800 $1,841.39 $1,694.08

AXE43182 Rear Roll 8600, 8700, 8800 $1,841.39 $1,694.08

Saw Tooth Chrome:

AZ101376 2 Needed 7200–7500, 7250–7550, 7180–7580 $1,994.84 $1,835.25

AZ101377 2 Needed 7700–7800, 7750–7950, 7780–7980 $2,455.19 $2,258.77

AXE43639 Front Roll 8100, 8200, 8300, 8400, 8500 $2,455.19 $2,258.77

AXE43640 Rear Roll 8100, 8200, 8300, 8400, 8500 $2,400.00 $2,208.00

AXE43492 Front Roll 8600, 8700, 8800 $2,608.64 $2,399.95

AXE43493 Rear Roll 8600, 8700, 8800 $2,608.64 $2,399.95

32% Saw Tooth Chrome (Rear Roll Reversed):

AXE43639 2 Needed 8100, 8200, 8300, 8400, 8500 $2,455.19 $2,258.77

AXE43492 2 Needed 8600, 8700, 8800 $2,608.64 $2,399.95

Saw Tooth Whole Crop:

AZ102633 2 Needed 7200–7500, 7250–7550, 7180–7580 $1,483.34 $1,364.67

AXE43641 Front Roll 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,564.00

AXE43642 Rear Roll 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,564.00

AXE43494 Front Roll 8600, 8700, 8800 $1,841.39 $1,694.08

AXE43495 Rear Roll 8600, 8700, 8800 $1,841.39 $1,694.08

Triangle Milo / Sorghum:

AZ54513 2 Needed 7200–7500, 7250–7550, 7180–7580 $1,450.00 $1,334.00

AXE43643 2 Needed 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,564.00

AXE43496 2 Needed 8600, 8700, 8800 $1,800.00 $1,656.00

55

With advanced TruSet Tillage technology you can independently adjust settings for depth and pressure (while on the go) in just seconds. That’s up to 200 times faster than manual field adjustments.

With just a few simple touches you can command TruSet to respond to changing field conditions. Go from lighter soil to highly compacted areas with 1/10-in. (2.5mm) accuracy. Also at your fingertips is real-time data for actual tillage settings, in addition to tillage pass documentation for later review and analysis.

Available for most newer John Deere implements and tractors—and compatible with competitive tractors—TruSet enhances your entire tillage operation by:

Maximizing yield potential Increasing fuel efficiency Lowering operating costs Providing documentation and prescription functionality

10% Off TruSet Attachments Kits.Discount available for a limited time.

Contact your John Deere dealer today.*

Go to https://www.deere.com/en/tillage/truset/ to learn more.

Compatible equipment for TruSet2230 Field Cultivator2330 Mulch Finisher2510H High-Speed Applicator2620 and 2630 Series Disks2720 Disk Ripper2730 Combination Ripper2623VT, 2633VT, and 2660VT Vertical Tillage

Adjust depth and pressure in seconds with TruSet™

* Receive 10% off the purchase of one or more TruSet attachment kits from an authorized John Deere dealer between 27 April 2020 and 28 August 2020. Valid only at participating John Deere dealers in the U.S.

10" LaserRipPart Number: N400740Applications: DMIFits: 1 ½-in. Parabolic Standard

Part Number: N237223Application: SunflowerFits: 1 ¼-in. Parabolic Standard

Part Number: N236412 Application: DMIFits: 1 ½-in. Parabolic Standard

Part Number: N237224Application: SunflowerFits: 1 ¼-in. Parabolic Standard

Part Number: N400739Applications: DMIFits: 1 ½-in. Parabolic Standard

7" LaserRip II Part Number: KK28541Application: DeereFits: 1 ¼-in. Parabolic Standard

Wingless LaserRip IIPart Number: KK28539Application: DeereFits: 1 ¼-in. Parabolic Standard



LIST $107.55NOW $ 98.95

LIST $114.79NOW $105.61

LIST $135.96NOW $125.08

LIST $175.94NOW $161.86

LIST $153.88NOW $141.57

LIST $92.09NOW $84.72

LIST $92.09NOW $84.72

LIST $112.79NOW $103.77

LIST $128.07NOW $117.82

LaserRip™ II Ripper Points

LaserRip Ripper Points

2 ¾" LaserRip 7" LaserRip

56

The John Deere LaserRip™ Classic is a low disturbance ripper point, ideal for operators who want to create less soil disturbance and a more even soil profile at shallower depths. The LaserRip Classic has improved thickness and reinforced in key critical wear areas of the sweep compared to the previous version of the low disturbance ripper point.

LaserRip Classic Ripper Points


KK47198 7" LaserRip™ Classic $125.37 $115.34

KK47199 10" LaserRip™ Classic $162.27 $149.29

TILLAGE PARTS

57

■ Wingless points provide ultra-low surface-soil disturbance ■ Choose 7-in. points for moderate soil disturbance ■ 10-in. points deliver low surface-soil disturbance ■ Fits John Deere 913 and 915 Rippers and 2100 Min-Till Ripper

Min-Till Ripper Points

NUMBER WING WIDTH LIST NOWJohn Deere LaserRip Min-till 3/4-in. Straight Standard (ultra-low-to-moderate soil disturbance):N262903 Wingless $120.84 $111.17

N262740 7-in. $131.27 $120.77

N262902 10-in. $118.76 $109.26

■ Designed for highly abrasive soils ■ An economical way to meet standard tillage needs■ Fits common Integral Min-Till V-Rippers and Disk Rippers

Steel Ripper Points

NUMBER SIZE THICKNESS/TYPE LIST NOW

Regular-Duty Steel Ripper Points – 3/4-in. thickness

AA21507 2 1/4-in. x 3/4-in. 3/4-in. – Standard $27.43 $25.24

AN260481 3-in. x 3/4-in. 3/4-in. Single Capped (3 3/4-in.) $35.27 $32.45

AN260482 3-in. x 3/4-in. 3/4-in. Double Capped (7 1/2-in.) $57.33 $52.74

Heavy-Duty Steel Ripper Points – 1 1/4-in. thickness

AP39487 2 1/2-in. x 1 1/4-in. 1/4-in. – Standard $43.58 $40.09AP39496 3-in. x 1 1/4-in. 1/4-in. Single Chrome Capped

(3 3/4-in.)$58.79 $54.09

AP39491 3-in. x 1 1/4-in. 1 1/4-in. Full; Cover Chrome Capped (10-in.)

$74.27 $68.33

Avoid plugging in wet conditions with new internal rolling basket scrapers for John Deere 2720 and 2730 rippers. The basket scrapers allow the operator to keep the baskets on the ground 100 percent of the time which results in more uniform field finish.

Internal Rolling Basket Scrapers


Rolling Basket Scraper for 2730 Combination Ripper

BKK10886 Basket Scraper Kit, 7 standard $ 618.20 $ 556.38

BKK10887 Basket Scraper Kit, 9 standard rigid $ 795.30 $ 715.77

BKK10888 Basket Scraper Kit, 9 standard fold $ 795.30 $ 715.77


BKK10890 Basket Scraper Kit, 13 standard $1,148.40 $1,033.56

Rolling Basket Scraper for 2720 Combination Ripper


BKK10969 Basket Scraper Kit, 7 standard rigid $ 773.30 $ 695.97

BKK10970 Basket Scraper Kit, 7 standard fold $ 773.30 $ 695.97


BKK10972 Basket Scraper Kit, 11 standard $1,215.50 $1,093.95

TILLAGE PARTS

58

Both low- and medium-crown wing designs provide excellent soil mixing and residue retention.

Conventional Chisel Plow Sweeps

NUMBER SIZE CROWN WING LIST NOW

N130188 6 1/2-in. Medium Medium $14.73 $13.55

N130188XLT 6 1/2-in. Medium Medium $36.84 $33.89

47CP014 14-in. Medium Medium $22.79 $20.97

N130182 14-in. Medium Medium $21.55 $19.83

N130182XLT 14-in. Medium Medium $45.67 $42.02


N130177 16-in. Low Narrow $20.28 $18.66




N130178XLT 18-in. Low Narrow $56.73 $52.19




N188290 24-in. Low Medium $46.69 $42.95

N130188

N130185

The unique wing design of Tru-Width sweeps ensures that they maintain their original cutting width and a sharp point. These sweeps fit John Deere and most brands of chisel plows, mulch tillers, and air seeders.

Tru-Width™ Chisel Plow Sweeps

NUMBER SIZE SHANK ANGLE LIST NOW

Medium-Crown Sweeps:

N182044 8-in. Regular Wing 51 Deg. $16.16 $14.87



N182035 12-in. Wide Wing 51 Deg. $16.60 $15.27

N182036 14-in. Wide Wing 51 Deg. $20.21 $18.59

N182037 16-in. Wide Wing 51 Deg. $20.63 $18.98

N182038 18-in. Wide Wing 51 Deg. $25.24 $23.22

Low-Crown (Conservation) Sweeps:

N402442 12-in. 51 Deg. $21.19 $19.49

N402449 14-in. 51 Deg. $24.94 $22.94

N402453 16-in. 51 Deg. $24.00 $22.08

N402276 18-in. 51 Deg. $35.18 $32.37

Heel Sweeps for Chisel Points

NUMBER SIZE THICKNESS LIST NOW

N237718 16-in. 1/4-in. $20.54 $18.90

N237719 18-in. 1/4-in. $22.91 $21.08

Chisel and cultivate at the same time, optimizing soil conditions.

TILLAGE PARTS

59

High-carbon steel for long life and superior performance. Retains original shape and stays sharp, even after considerable use.

Chisel Points

NUMBER SIZE THICKNESS LIST NOW

Chisel Points for Heel Sweeps, Double Point

N130189 2-in. x 14-in. 5/8-in. $17.58 $16.17

N130190 2-in. x 16-in. 5/8-in. $19.03 $17.51

N130193 4-in. x 14 1/2-in. 3/8-in. $19.28 $17.74

Single-Point Chrome Cap

N237890 2-in. x 12-in. 7/8-in. $35.81 $32.95

AN231796 2-in. x 12-in. 7/8-in. $34.06 $31.34

Heavy-Duty Double Point

N237910 2-in. x 16-in. 7/8-in. $27.00 $24.84

■ Create “soil ribbons” on field surface using crop residue to minimize soil erosion■ Produces excellent soil/trash mixing to help break down residue

Concave Twisted Double-Point Shovels

NUMBER SIZE LIST NOW1/2-in. Material Thickness:

N181912 1/2-in. x 3-in. x 24-in., right-hand $29.37 $27.02

N181913 1/2-in. x 3-in. x 24-in., left-hand $29.37 $27.02

N181906 1/2-in. x 4-in. x 24-in., right-hand $37.73 $34.71

N181907 1/2-in. x 4-in. x 24-in., left-hand $37.73 $34.71

New color coded aluminum hose handles make it easy to match up the hydraulic hoses on your implement with the correct function on the tractor. They also feature anti-slip design to make it easier to grip the hose and connect / disconnect from the back of the tractor. The color codes parts are laser engraved with the John Deere logo and the extend and retract icons to ensure proper matching up the proper function.

Color Coded Hose Grips


KK57310 Grip, Connector – Green Extend $38.69 $34.82

KK57311 Grip, Connector – Green Retract $38.69 $34.82

KK57312 Grip, Connector – Blue Extend $38.69 $34.82

KK57313 Grip, Connector – Blue Retract $38.69 $34.82

KK57314 Grip, Connector – Brown Extend $38.51 $34.66

KK57315 Grip, Connector – Brown Retract $38.69 $34.82

KK57316 Grip, Connector – Black Extend $38.69 $34.82

KK57317 Grip, Connector – Black Retract $38.69 $34.82

KK57318 Grip, Connector – Violet Extend $38.69 $34.82

KK57319 Grip, Connector – Violet Retract $38.69 $34.82

KK57320 Grip, Connector – Gray Extend $38.69 $34.82

KK57321 Grip, Connector – Gray Retract $38.69 $34.82

KK59026 Grip, Connector – Yellow $48.30 $43.47

TILLAGE PARTS

60

■ Made of reliable, long-lasting steel for high-performance disking ■ Precision-sharp edges for proper residue cutting and sizing ■ Made in the U.S.A.

John Deere Diamond Series Disk Blades

John Deere Vertical Tillage Blades■ Solid, shallow concavity spherical blade chops and sizes residue, manages

weeds and root balls, and removes field ruts■ Solid, shallow concavity blade mixes soil and residue, aerates soil, and

anchors residue


N242994 18-in. x 0.177, 2-in. Round – Plain Edge $30.65 $28.20



N403847 22-in. x 0.197, 2-in. Round – Wavy Edge $55.04 $50.64


Spherical, Plain Edge:

B31315 18-in. x 0.138, 1 1/8 x 1 1/4-in. Dual Square $28.73 $26.43

A47239 18-in. x 0.197, 1 1/8 x 1 1/4-in. Dual Square $30.65 $28.20B31318 20-in. x 0.177, 1 1/8 x 1 1/4-in. Dual Square

(2.03-in. concavity)$35.92 $33.05

N231991 20-in. x 0.177, 1 1/8 x 1 1/4-in. Dual Square (1.63-in. concavity)

$35.47 $32.63

N330738 20-in. x 0.197, 1 1/8 x 1 1/4-in. Dual Square $37.63 $34.62

A49254 22-in. x 0.177, 1 1/8 x 1 1/4-in. Dual Square $43.48 $40.00


A42170 22-in. x 0.256, 1 1/2-in. Round $50.91 $46.84

A27767 22-in. x 0.256, 1.547 x 1.672-in. Dual Square $52.56 $48.36




B35606 24-in. x 0.256, 1 1/8 x 1 1/4-in. Dual Square $55.13 $50.72


N242998 24-in. x 0.256, 2-in. Round $55.81 $51.35


B35608 26-in. x 0.256, 1 1/4-in. Square $77.03 $70.87

N242039 26-in. x 0.256, 1 1/4-in. Square $84.44 $77.68

Conical, Plain Edge:

B32711 22-in. x 0.177, 1 1/8-in. x 1 1/4-in. Dual Square $49.39 $45.44


K33524 24-in. x 0.187, 1 1/2-in. Round $56.01 $51.53

B32715 24-in. x 0.256, 1 1/4-in. Square $72.05 $66.29

B28211 24-in. x 0.256, 1 1/2-in. Square $73.33 $67.46

B32717 26-in. x 0.256, 1 1/4-in. Square $76.28 $70.18

B29353 26-in. x 0.256, 1 1/2-in. Square $76.28 $70.18

61

The ProSeries Opener offers agronomic advantages and extended wear life compared to the current 90 Series openers. For 60-series openers, to be compatible, seed tubes must also be upgraded to the 90-series seed tubes.

Features include: Seed Boot – A narrower, tighter fit to the disk results in less soil throw for better seed-to-soil contact and extended wear life.Press Wheel – Narrower and more flexible press wheel improves overall seed-to-soil contact for more even emergence, plus upgraded double-row ball bearing extends service life. Serrated Closing Wheel – Improved closing system when seeding in harder, drier conditions. The notches on the wheel break up the drier soil for better germination.Seed Tab – Improved material for longer wear life, angled and more flexibility in the seed trench results in less seed bounce for more consistent seed placement.Closing Spring – Easier adjustments.

Separate Fertilizer Placement Openers for 90-Series.Features include:SFP Sealing Wing allows for better sealing of NH3 in the soil.Kit contents include: Scraper, Sealing Plate, Disk Opener, Hardware, (smooth or serrated closing wheel is not included).

ProSeries™ Seed Opener Performance Upgrade Kits for 60 and 90 Series Openers


AA97392 Seed Opener Performance Upgrade Kit 8-rows (4 right/4 left) $1,995.00 $1,835.40

AA98693 Seed Opener Performance Upgrade Kit 2-rows (1 right/1 left) $ 525.00 $ 483.00

AA102151 SFP Opener Performance Upgrade Kit 8-rows (4 right/4 left) $1,701.13 $1,565.04

AA102150 SFP Opener Performance Upgrade Kit 2-rows (1 right/1 left) $ 425.28 $ 391.26

AIR SEEDER AND DRILL PARTS

Get the ultimate seal of performance:“Inspected by John Deere.”Whether you own a box, no-till, or air-hoe drill, it pays to keep your equipment in top shape with a post-season John Deere inspection. Our certified technicians check the most critical areas to increase your drill’s efficiency and accuracy. Schedule your inspection today and be ready to roll next season.

John Deere offers 1-in. through 2-1/2-in.-diameter, clear with green or black helix hose for air seeder applications. This clear, smooth-core, PVC hose is recommended for heavy-duty suction and discharge of seed, as well as agricultural chemicals, marine, and liquid waste.

Air Seeder Hose—Low Pressure

NUMBER ID. OD LIST

Good

PM112BK100, PM112GR100 1.00-in. (25.4 mm) 1.25-in. (31.8 mm) $0.83

PM112BK250, PM112GR250 2.50-in. (63.5 mm) 2.84-in. (72.1 mm) $2.37

Better

PM113UVBK100 1.00-in. (25.4 mm) 1.25-in. (31.8 mm) $1.68

PM113UVCLBK 2.50-in. (63.5 mm) 2.84-in. (72.1 mm) $4.77

Best

PM100ULBK100, PM100ULGR100 1.00-in. (25.4 mm) 1.25-in. (31.8 mm) $2.11

PM100UCLBK, PM100ULGR250 2.50-in. (63.5 mm) 2.87-in. (72.9 mm) $4.76Price shown is per foot. BK = Clear w/ Black Helix, GR = Clear w/ Green Helix. See dealer for other sizes and color combinations.

Use the low meter roller for seeds such as flax, canola, and alfalfa. The medium roller is best when planting wheat, barley, canola, and small soybeans up to 1/4 inch in diameter and with medium rates of fertilizer. The high rate roller is for high rates of fertilizer and large soybeans bigger than 1/4 inch in diameter. The very high rate roller is best used when planting barley and oats with beards, large seeds such as garbanzo beans, and with very high fertilizer rates. Fine tuning rings reduce the amount of product available to meter for increased accuracy.

Meters, Rollers, and Tuning Rings for John Deere Air Seeders

NUMBER METER TYPE APPLICATION RATE LIST NOW

Meter Roller Kits:

AA45605 Low 1–20 lb. per acre $67.66 $62.25

AA45606 Regular 20–130 lb. per acre $93.09 $85.64

AA45607 High Rate 30–220 lb. per acre $84.42 $77.67

Meter Rollers:

A58874 Low 1–20 lb. per acre $59.27 $54.53

A58473 Regular 20–130 lb. per acre $44.73 $41.15

A58479 High Rate 30–220 lb. per acre $38.01 $34.97

A69212 Very High Rate 50–265 lb. per acre $33.36 $30.69

Fine-Tuning Rings:

A57192 Low $ 7.67 $ 7.06

A57197 Regular $ 7.67 $ 7.06

A57195 High Rate $ 7.67 $ 7.06

A70069 Very High Rate $ 7.42 $ 6.83

62

Guaranteed to plant a smile on your face. SectionCommand™

Fewer skips. Less overlaps. That’s what you get with SectionCommand from John Deere. This innovative, field-installed attachment diminishes your seed and fertilizer costs through efficient, uniformed seeding to make you more profitable.

For use with John Deere 1910 Air Carts and all hydraulic carts, you can rely on SectionCommand to:

■ Boost emergence and growth consistency■ Enhance uniformed maturity at harvest■ Reduce input costs for seed and fertilizer■ Limit filling labor

To learn more about SectionCommand, see us today.

It’s the more profitable way to seed.John Proulx sums up the performance of SectionCommand in three words, “picture-perfect fields.” Owner of a soybean and wheat farm in Crookston, Minnesota, John has personally experienced the value of SectionCommand on his 8,000 acres.

According to John, SectionCommand improves efficiency by eliminating double seeding and lodging. Ultimately, that leads to greater profitability thanks to lower seed and fertilizer costs—in his case up to 10 percent on irregularly shaped fields and 4 percent everywhere else.

Invest in SectionCommand—like John—for picture-perfect fields.

“You don’t have spots where it’s double seeded and lodging,” explains John. “At harvest, crops mature more evenly in the field. SectionCommand really improved our efficiencies.” - John Proulx / Crookston, Minnesota

63

64

Stainless Steel Air Seeder PartsNow Available from A&I Products

Corrosion-resistant 304 stainless steel and high abrasion and wear plastics.

Patent-pending design has individual row shutoff with both manually and automatically operated slide gates.

These units are washable, with a cleanout at the bottom of the meter.They require no foam, and are maintenance-free, with no need for grease.

This exclusive single-wall design doesn’t allow fertilizer dust to accumulate in an air cavity. No air cavity means no swelling or distortion.


65

50, 60, and 90 Series Opener Parts

Seed BootN284045

Opener BladesN283804

Closing WheelN283866

Spoke Gauge WheelAA98187

NUMBER DESCRIPTION SERIES LIST NOW

Gauge Wheels:

A84050 Tire, Semi-Pneumatic, 4 1/2 x 16-in. 50, 60, 90 $ 35.07 $ 32.26

A84062 Tire, Gauge Wheel, 4 1/2 x 16-in. 60, 90 $ 39.93 $ 36.74

AA66599 Wheel, Steel Gauge 60, 90 $ 82.30 $ 75.72

AA66604 Wheel and Tire Assembly, Offset Gauge 60, 90 $100.46 $ 92.42

A85133 3-in. x 16-in. Gauge Wheel Tire 90 $ 41.90 $ 38.55

AA66988 3-in. x 16-in. Gauge Wheel Assembly 90 $ 88.40 $ 81.33

AA92485 Arm, Gauge Wheel Arm 90 $ 72.98 $ 67.14

AA98188 Wheel, Narrow Gauge, Spoked 90 $157.54 $144.94

AA98187 Wheel and Tire Assembly, Offset Gauge, SP 90 $157.54 $144.94

AA98189 Wheel and Tire Assembly, Conservation, S 90 $171.03 $157.35

AN211864 Gauge Wheel Assembly 50 $ 87.69 $ 80.67

A84451 Tire – 4.5 x 16, Conservation, Large Lip 60 $ 44.93 $ 41.34

Closing Wheels:

N281706 Wheel, 10-in. 90 $ 17.07 $ 15.70

N281714 Tire, Semi-Pneumatic, 1 x 10-in. 90 $ 9.27 $ 8.53

N283866 Wheel, Closing, SFP 90 $ 58.28 $ 53.62

AN213060 Wheel Assembly, Closing 50 $ 64.33 $ 59.18

AN280248 Arm, Assembly Closing Wheel, RH 50 $253.62 $233.33

AN280249 Arm, Assembly Closing Wheel, LH 50 $225.81 $207.75

AN282190 Arm Assembly, SFP Closing, RH 90 $279.79 $257.41

AN282191 Arm Assembly, SFP Closing, LH 90 $295.51 $271.87

N282110 Wheel, Closing 60 $ 38.82 $ 35.71

AN281359 Tire and Wheel Assembly 50 $ 29.93 $ 27.54

Press Wheels:

N284110 Tire, Press Wheel 60, 90 $ 11.45 $ 10.53

N284111 Press Wheel 60, 90 $ 16.43 $ 15.12

N283932 Spring, Press Wheel, RH 90 $ 26.86 $ 24.71

N283933 Spring, Press Wheel, LH 90 $ 22.79 $ 20.97

Opener Blades:

N283804 Disk opener, 18-in x 0.197-in. 50, 60, 90 $ 34.32 $ 31.57

AN281856 Hub Assembly 90 $ 77.46 $ 71.26

N219700 Hub, Coulter 50 $ 58.84 $ 54.13

Seed Boots:

N284024 Seed Boot, Extra Wear, RH 90 $105.00 $ 96.60

N284025 Seed Boot, Extra Wear, LH 90 $105.00 $ 96.60

N284044 Seed Boot, One Piece, RH 90 $ 41.61 $ 38.28

N284045 Seed Boot, One Piece, LH 90 $ 41.61 $ 38.28

N282788 Seed Boot, RH, Upper 60 $ 36.67 $ 33.74

N282789 Seed Boot, LH, Upper 60 $ 36.67 $ 33.74

N283432 Seed Boot, RH, Lower, Chrome 60 $ 30.40 $ 27.97

N283433 Seed Boot, LH, Lower, Chrome 60 $ 30.40 $ 27.97

Seed Tubes:

A54632 Tube, Seed 50 $ 50.42 $ 46.39

A63630 Tube, Straight 60 $ 73.53 $ 67.65

A63631 Tube, Seed, LH 60 $ 97.06 $ 89.30

A63632 Tube, Seed, RH 60 $ 90.74 $ 83.48

N282719 Tube, Fertilizer 60 $ 54.19 $ 49.85

N282720 Tube, Front Seed 60 $ 53.55 $ 49.27

N282817 Tube, Rear Seed 60 $ 52.75 $ 48.53

Standard Hoe OpenerN280371


66

Whether using dry, liquid, or anhydrous ammonia, the John Deere 1870 opener has the options that fit the application needs. Austempered 10B38 boron steel point with hardfaced areas and induction fused carbide inserts to prevent wear. Carbide plates are 4mm thick along the point edge and 6mm thick on the tip.

1870 Air Hoe Drill Fertilizer Points

NUMBER APPLICATIONDRY FERTILIZER TUBE ADD ON HOSE GUIDE LIST NOW

AA74478 Aqua Anhydrous Point

AA69271 AA69272 hose guide is required if dry fertilizer tube is not installed

$178.01 $163.77

AA69276 NH3 Point AA69271 AA69272 hose guide is required if dry fertilizer tube is not installed

$178.01 $163.77

AA74476 Liquid Fertilizer Point

AA69271 AA69272 hose guide is required if dry fertilizer tube is not installed

$178.01 $163.77

AA69277 Dry Fertilizer Point AA69266 n/a $157.37 $144.78

AA86117 Mud Special Point n/a n/a $141.91 $130.56

Air Hoe Drill PartsNUMBER DESCRIPTION APPLICATION LIST NOW

Points

N219619 Point, Spear 1820/1830 $ 24.03 $ 22.11

M15012 Single-Point, Wrap-Around 1820/1830 $ 12.24 $ 11.26

AA71412 Point, Seed, Single Row 1870 $122.43 $112.64

AA74427 Point, Seed, Paired Row 1870 $192.40 $177.01

Shovels

AN213462 Shovel Weldment, Spear Point 1820/1830 $109.34 $100.59

N219423 Seed Deflector 1820 (s/n: -705100)/1830 $ 15.94 $ 14.66

Openers

N280371 Standard, Hoe Opener 1820/1830 $113.43 $104.36

A57995 Standard, Spring Cushion LH Offset 1820/1830 $238.46 $219.38

A57996 Standard, Spring Cushion RH Offset 1820/1830 $238.46 $219.38

N217347 Link Spring 1820/1830 $ 6.19 $ 5.69

N217747 Seed Tube 1820/1830 $ 75.34 $ 69.31

Press Wheels and Tires

A81731 3 x 21-in., Semi-Pneumatic 1820/1830 $ 78.97 $ 72.65

A93809 4 x 21-in., Press Wheel Tire 1820/1830 $100.28 $ 92.26

AA79788 4 x 21-in., Semi-Pneumatic, Middle 1820/1830 $444.91 $409.32

AA48855 3-in. Steel Middle Press Wheel 1820/1830 $279.90 $257.51

AA49031 3-in. Steel End Press Wheel 1820/1830 $297.42 $273.63

AA48605 4-in. Steel Middle Press Wheel 1820/1830 $297.42 $273.63AA48606 4-in. Steel End Press Wheel,

Weldment1820/1830 $288.66 $265.57

A61674 4 x 22-in. Steel Press Wheel 1820/1830 $ 62.40 $ 57.41

A64409 3 x 21-in. Steel Press Wheel 1820/1830 $ 51.85 $ 47.70

A88182 Scraper Blade 1870 $ 19.55 $ 17.99

AA73487 Tire and Wheel Assembly 1870 $245.48 $225.84

AA86117

Press WheelA61674

ShovelAN213462

PointM15012

SOLUTIONS FOR YOUR SPRAYING NEEDS

120° wide and 60° thick pattern provides optimum coverage while maintaining overlap at low boom heights

Dual pre-orifice nozzle reduces drift with Coarse, Very Coarse and Extremely Coarse droplets

Twin 30° forward and rear-facing dual angles for superior coverage

Delivers Medium and Coarse droplets across wide operating range and sizes to meet speed/rate needs

130° spray angle allows lower boom heights to reduce drift and prevent pattern collapse when using drift-reduction adjuvants

Delivers Extremely Coarse and Ultra Coarse, air-filled droplets for 90-95% drift reduction compared to standard flat fan nozzle

POST-EMERGE PLANT HEALTH

Wide 140° angle allows low boom height minimizing corrosive effects on equipment

Tapered wide-angle fan style promotes uniform nutrient application

60° thick spray pattern front to back and 120° wide spray angle enables lower boom height to reduce drift

Air-induced droplets minimize drift potential without sacrificing coverage

Tight, inclined spray pattern delivers 3-dimensional coverage on hard to hit targets

Delivers 50–75% less drift compared to flat fan nozzles

PRE- AND POST-EMERGE FERTILIZER ALL-PURPOSE, PLANT HEALTH AND CONTACT HERBICIDES

3DUltra-low-driftHigh-flow

Low-drift Max Low-drift Twin Ultra-low-drift Max

Download the ApplyPlus™ App and use the Nozzle Select Tool to purchase spray nozzles, right from your phone.

PRE- AND POST-EMERGE HERBICIDE

LIST: $9.70 NOW: $8.92

LIST: $11.27 NOW: $10.37 LIST: $10.13 NOW: $9.32 LIST: $11.27 NOW: $10.37

LIST: $8.56 NOW: $7.88 LIST: $6.79 NOW: $6.25

67

68

Improve system hygiene by removing the dead zone on the end of the boom pipes, reducing air and residue buildup.■ Allows air to escape through the nozzle body, reducing turn-off/turn-on times by

up to 85%■ Removable end plug allows easy access for boom cleanout

Express Nozzle Body End Caps


PM74333314 1-in. Express Cap Fitting w/ Nozzle Body End Cap (high flow) $37.43 $34.44

PM74333316 1-in. Express Cap Fitting w/ Nozzle Body End Cap (standard) $37.43 $34.44

This valve allows quick flushes of the entire boom section with a turn of a handle. Purchase the Express Flush Valve alone or installed on the Express End Cap.■ Easy to use valve does not require any tools to open flushing mode ■ Reduces flush time by 5 seconds per valve compared to standard Express End

Caps alone ■ Compact design limits the length it extends beyond the last nozzle body to fit

most booms

Express Flush Valves

NUMBER DESCRIPTION LIST NOWPS74333318 Express Flush Valve – high flow $39.34 $36.19

PS74333320 Express End Cap with Express Flush Valve Installed – high flow

$57.93 $53.30

PS74333319 Express Flush Valve – standard flow $39.34 $36.19

PS74333321 Express End Cap with Express Flush Valve Installed – standard flow

$57.93 $53.30

These flange adapters enable the use of Express Nozzle Body End Caps on 4-Series Sprayer models R4023, R4030, R4038, and R4045.

Flange Adapters for Express End Caps


PS24000152 End Cap Flange Adapter – standard flow $9.76 $8.98

PS24000153 End Cap Flange Adapter – high flow $9.76 $8.98

High-Flow Nozzle BodyOur 5-way nozzle body enables quick spray nozzle changeover. Simply rotate the nozzle body until the desired nozzle is in the spraying position.■ Designed to deliver the highest flow rates across the spraying pressure range■ Provides the lowest pressure drop at any given flow in the industry■ Reduces restrictions in the flow path through a unique DCV design■ Supports faster field speeds with the same coverage


AN206621 5-Position High Flow, 11/16-in. port, Viton seals $29.93 $27.54

John Deere spray boom upgrades help: ■ Minimize cross-contamination ■ Prevent crop injury and yield loss ■Simplifiesboomcleanout

SPRAYER PARTS

69

John Deere’s broad line of centrifugal pumps allows you to match the right pump to your equipment and task. The models include cast iron, stainless steel and polypropylene that stand up to strong chemical herbicides.■ Compatible with corrosive, abrasive and general use chemicals ■ Models include high volume (440 gpm) and high pressure (190 psi) capabilities ■ Nylon, polypropylene impellers on most models ■ Life Guard® silicon carbide mechanical seals standard on all stainless steel pumps

and available on select cast iron and polypropylene models

OEM Sprayer Pumps

NUMBER DESCRIPTION APPLICATION LIST NOWAN204470 Cast-Iron Pedestal Pump –

CW (clockwise) rotation6100, 6500, 6700 $ 921.00 $ 847.32

AN204471 Cast-Iron Pedestal Pump – CCW (counter clockwise) rotation

6600, 6700 $ 939.41 $ 864.26

AN208804 Clutch Driven Cast-Iron Centrifugal Pump – CW (clockwise) rotation

6700 $ 855.36 $ 786.93

AN208805 Clutch Driven Cast-Iron Centrifugal Pump – CCW (counter clockwise) rotation

6700 $ 855.36 $ 786.93

AN206253 Cast-Iron Centrifugal Pump – NPT 4700, 4710 $1,361.83 $1,252.88

AN206042 Cast-Iron Centrifugal Pump – NPT 4710, 4720, 4830, 4730 $1,234.20 $1,135.46

AKK20040 Stainless Steel Centrifugal Pump – NPT 4730, 4830 $1,715.87 $1,578.60

AN206021 Cast-Iron Centrifugal Pump – universal flange

4920, 4930 $1,295.03 $1,191.43

AN209114 High-Flow Cast-Iron Centrifugal Pump – less motor

4920, 4930 $3,703.46 $3,407.18

AN400921 High-Flow Cast-Iron Centrifugal Pump w/ Speed Sensor

4940 $4,696.40 $4,320.69

AN400923 High-Flow Cast-Iron Centrifugal Pump w/ Speed Sensor – less motor

4940 $3,472.81 $3,194.99

AN401863 Cast-Iron Universal Flange Centrifugal Pump w/ Speed Sensor

4940 $1,530.96 $1,408.48

AN303707 Cast-Iron Centrifugal Pump w/ Speed Sensor

4630, R4023 $1,317.50 $1,212.10

AN402587 Cast-Iron Universal Flange Centrifugal Pump w/ Speed Sensor, metric motor ports

R4030, R4045 $1,557.90 $1,433.27

Superior wet-seal protection for today’s most demanding spray conditions.■ Wet-seal technology protects the seals by using a barrier fluid to keep them cool

and lubricated, even while the pump is running dry■ Actively maintains a positive pressure differential between the chamber barrier

fluid and the pumping solution, which prevents chemical bonding of the seal faces, resulting in increased life and maintenance-free operation

■ Protects seal against dry run failure■ Minimizes sprayer downtime and improves productivityAsk us how the Forcefield pump provides worry-free sprayer operation.

ForceField Centrifugal Pump

NUMBER DESCRIPTION APPLICATION LIST NOWAKK30367 High-Flow Cast-Iron ForceField Pump R4038, R4044, R4045,

R4060$5,518.36 $5,076.89

AKK30366 High Flow Cast Iron Forcefield Pump, less hydraulic motor

R4038, R4044, R4045, R4060

$4,287.44 $3,944.44

Membrane

Double Mechanical Seal

Front Seal Plate

Stainless Steel Impeller

Barrier Fluid

70

Get superior cleaning power with leading Spray System CleanersA lot has changed in the past decade. Bigger sprayers, more powerful crop protection products, and increased tank mixing can lead to cross contamination and reduced yields when sprayers aren’t cleaned properly.

Ordinary tank cleaners were never designed to remove oily residues that can build up throughout the entire liquid system of a sprayer. Erase™ is a powerful spray system cleaner that exceeds the capabilities of ordinary tank cleaners. Erase emulsifies oily residues in tanks, sprayer lines, and hoses while elevating rinsate pH to degrade vulnerable crop protection products. Combined with good sprayer cleaning technique, Erase virtually eliminates the risk of cross-contamination that leads to crop injury complaints, yield loss, and a damaged reputation as a professional applicator.

Protect your crops and equipment

ErasePowerful spray system cleaner that penetrates and removes dried-on and oily residue in tanks, sprayer lines, and hoses to help prevent cross-contamination.

NUMBER DESCRIPTION SIZE LIST NOW

PM433QT Erase Spray System Cleaner 1 qt. $12.41 $11.42

PM43301 Erase Spray System Cleaner 1 gal. $36.68 $33.75

Incide-Out is a liquid spray tank cleaner that emulsifies and bonds pesticide residue to rinse water for complete purging.■ Penetrates residue buildup ■ Contains corrosion inhibitors to protect equipment

Incide-Out™


PM434QT Incide-Out Spray Tank Cleaner 1 qt. $12.63 $11.62

Formulated marking foam that generates greater volumes of foam for higher operating pressures and application speeds.

Enduron PSI™


PM65201 Enduron PSI 1 gal. $35.66 $32.81

Marking foam colorant that increases foam visibility in drilled crops and heavy residue situations where optical clarity of white foam is limited.

Tracer™ Hot Pink


PM741QT Tracer Hot Pink 1 qt. $37.46 $34.46

Defoaming agent that works in seconds to provide faster results.

Gundown Elite™


PM739QT Gundown Elite 1 qt. $20.20 $18.58

PM73901 Gundown Elite 1 gal. $61.52 $56.60

2 Wheel Motor ShieldsThese shields help keep the crop and mud away from the inside of the wheel motor for easier cleaning and added protection from field debris.Applications: 4720, 4730, 4830, 4920, 4930, R4030 Sprayers

Contact us for a complete listing of sprayer upgrades

4 ExactApplyIndividual nozzle control for precise droplet sizing and consistent application management helps reduce input costs and elevates productivity.Applications: R4030, R4038, R4044, R4045, R4060 Sprayers

3Strong, durable, polyethylene wheel shields are available for 320, 380, and 420 tires to help prevent damage to crops.Applications: 4630, 4710, 4720, 4730, 4830, 4920, 4930, 4940, R4023, R4030, R4038, R4044, R4045, R4060 Sprayers

Crop Shields

7Reduce the amount of time it takes to fill your tank and get back in the fields faster.Applications: R4030, R4038, R4044, R4045, R4060 Sprayers

Front Fill

Add more performance and precisionwith John Deere Sprayer upgrades

1 BoomTrac Pro™

Increase application accuracy and minimize spray drift and skips with the help of this boom height-sensing software that responds to ground contour changes. Five-sensor system recommended for 120-foot (36.6 m) boom or severe applications. Three-sensor system is for relatively flat to gently rolling terrain.Applications: 4630, 4730, 4830, 4920, R4023, R4030, R4038, R4044, R4045, R4060 Sprayers

5 AutoTrac Vision and RowSenseReduce operator stress and improve yields through accurate row following.Applications: 4630, 4730, 4830, 4930, 4940, R4023, R4030, R4038, R4044, R4045, R4060 Sprayers

6Load 1,200 gals. in as little as 3 minutes so you can get back to your field faster and spray more acres per day.Applications: 4930, 4940, R4045, R4060 Sprayers

Load Command

JohnDeere.com/SprayerParts

AutoTrac Vision and RowSense

5

Load Command

6

Front Fill

7

ExactApply

4BoomTrac Pro

1

Wheel Motor Shields

2

Crop Shields

3

71

72

John Deere hose assemblies built to OEM specifications. Ask your dealer about hoses for any brand of equipment.

Your John Deere dealer can build hydraulic hoses in minutes.

HOSES IN MINUTES

We follow through to deliver uptime for you.Stay up and running, and eliminate the worry about contaminants entering your hydraulic system. Trust your John Deere dealer to deliver complete solutions, like Ultra Clean, that ensure contaminants are completely removed from new hose assemblies.

Ask your dealer how Ultra Clean means uptime.

Prevent messes and environmental contamination from residual fluids leaking out of hydraulic hoses and/or hydraulic ports during repairs. An essential component of any well-stocked toolbox on the farm!

Hose Drip Plugs


SW304-257 Mini Drip Plug (1–10mm), package of 24 $59.00

SW304-258 Standard Drip Plug (5–22mm), package of 12 $59.00

SW304-259 Large Drip Plug (12–42mm), package of 4 $59.00

SW304-260 X-Large Drip Plug (50–80mm), package of 3 $59.00

SW304-262 Drip Plug Kit, package contains 6 mini, 4 standard, and 2 large $59.00

HOSES & HYDRAULIC PARTS

73

■ Heavy-duty, double-acting tie-rod cylinders is rated for 2,500 or 3,000 psi continuous working pressure

■ Chrome-plated, hardened piston rod and heavy-duty ductile iron clevis with 360-degree thread contact area and positive-locking set screw device

■ Clevises include high-tensile zinc plated pins

John Deere Hydro-Max™ Hydraulic Cylinders

NUMBER SIZE WORKING PRESSURE RETRACTED LENGTH EXTENDED LENGTH PORT SIZE LIST

TY8628 2 1/2 x 8-in. 2,500 20 1/4-in. 28 1/4-in. 3/8-in. NPTF $161.84

TY22540 2 x 8-in. 3,000 20 1/4-in. 28 1/4-in. SAE 8 ORB $173.40

TY8627 2 x 8-in. 2,500 20 1/4-in. 28 1/4-in. 3/8-in. NPTF $156.11

TY22541 2 1/2 x 8-in. 3,000 20 1/4-in. 28 1/4-in. SAE 8 ORB $181.49



TY8630 3 1/2 x 8-in. 2,500 20 1/4-in. 28 1/4-in. 1/2-in. NPTF $225.77

TY22507 3 1/2 x 8-in. 3,000 20 1/4-in. 28 1/4-in. SAE 8 ORB $248.91


Add additional hydraulic outlets to prime movers economically. Hydraulic multipliers are transparent to the hydraulic system and work safely on all makes of equipment. They’re easy to operate and provide a no-hassle solution to mobile equipment hydraulic shortages. These units are 100% final product-performance tested, and components are ISO-9002 certified.

Hydraulic Multiplier and Add-On Valves

NUMBER DESCRIPTION LISTSW700-1002 Economy Multiplier Valve with 2 Circuits.

Works with switchbox.$341.79

SW700-1510 Standard Multiplier Valve with 2 Circuits. Works with switchbox and ISO couplers.

$475.96

SW700-1590 Standard Multiplier Valve with 2 Circuits. Works with John Deere couplers.

$574.92

SW700-1513 Standard Multiplier Valve with 3 Circuits. Works with switchbox.

$844.25

SW700-1553 Standard Multiplier Valve with 3 Circuits. Works with RCS handle.

$889.98

Stainless Steel Hose ClampsNUMBER CLOSED AND OPEN RANGE DUTY LIST

TY22462 1/4–5/8 in. Light $0.81

TY22465 9/16–1 1/16 in. Standard $0.97

TY22466 11/16–1 1/4 in. Standard $0.97

TY22467 13/16–1 3/4 in. Standard $0.97

TY22472 2 5/16–3 1/4 in. Standard $1.07

Ethylene-centered hose recommended for use where additional chemical resistance is required. Outstanding clean-out performance resulting in lowest carryover damage from herbicides such as dicamba.

Premium Chemical Hose

NUMBER ID OD WKG PR. @70°F WKG. PR. @122°F LIST

PMA4086-06 3/8-in. 0.67-in. 800 300 $2.33

PMA4086-08 1/2-in. 0.84-in. 800 300 $3.45PMA4086-12 3/4-in. 1.14-in. 800 250 $5.57

FILTERS & FLEETGUARD

74

Today’s trucks and competitive machines face more challenges than ever before, operating under higher heat and more demanding conditions. Luckily, Fleetguard is ready to take on tough conditions and protect your vehicle, no matter the brand! Example engine oil filtration, using advanced StrataPore® technology. Fleetguard’s synthetic, multi-layered StrataPore media provides higher capacity, greater efficiency, and less restriction than traditional media. And thanks to our wide range of Fleetguard replacement filters that meet OEM specifications, you can take advantage of StrataPore technology for almost any diesel engine. We offer Fleetguard filters for almost every make of equipment. Look for Fleetguard air, fuel, and hydraulic filters for superior protection, too. See us today!

Lube: Fleetguard spin-on lube filters meet or exceed OE performance requirements and the new challenges of modern engine technology. StrataPore media as introduced in the full flow section to work in combination with the stacked discs to remove the smallest dirt particles, which cause the most engine damage. This configuration reduces engine wear by as much as 60% in some applications. The pairing of NanoNet® media with StrataPore media has created a new breed of lube filter that offers higher efficiency, higher capacity, and the best cold flow vs. restriction available.

Air: Fleetguard air filters deliver the cleanest combustion air possible for On & Off Highway engine applications. Nanofiber, when combined with our enhanced pleat design, delivers optimal air filter performance for superior engine protection and lower equipment operating costs. Magnum RS® radial seal primary and safety air elements provide real-world value. Magnum RS offers unique features that provide significant benefits for longer service life and optimum performance when the job demands it.

Fuel: Fleetguard fuel filters deliver best-in-class performance using proprietary StrataPore or NanoNet media which remove harmful contaminants. Each gradient media layer offers unique properties that tailor performance based on specific applications requirements. Use of Fleetguard on-engine filters ensures optimal fuel system protection.

Hydraulic: We also offer a comprehensive replacement hydraulic filter line for many competitive filter part numbers. Through the right choice of filter media, Fleetguard hydraulic filtration products achieve higher efficiency and dust capacity with lower pressure-drop characteristics than the competition. This prolongs component life, which saves you money in the long run. The proper oil-cleanliness level for critical clearances on components in the hydraulic fluid stream is the key.

Protect your trucks and All Makes equipment with the advanced technology of Fleetguard® filters.

74

When it comes to fuel, water is the number one enemy, leading to poor performance and reliability.

That’s why John Deere fuel filters are specially designed to not only trap water, but also repel it.

Matched to your machine for optimized fuel flow, all genuine John Deere fuel filters are tested to

meet or exceed original John Deere specifications.

Don’t trust your equipment to anyone else. Insist on genuine John Deere fuel filters.

John Deere Fuel Filters—They’re just better.

Scan here to see why John Deere filters are better!

Coated Media

Prevents damage to fuel components by repelling water and contaminants

Tight pleats/ even media spacing with maximum surface area

Catches water and particles down to five microns in certain applications

Metal End Caps

Stronger and more reliable, resists moisture

Tight seal between media and filter casing

Designed to keep dirty fuel from reaching the engine

75

ONE

ENGINE

OIL

ON THE FARM. IN THE FIELD. ON THE HIGHWAY.

JOHN DEERE PLUS-50™ II OIL. KEEP RUNNING.

ONE ENGINE OIL FOR ALL.

JohnDeere.com/OilJohnDeere.ca/Oil

Use only as directed. Please read safety and warning information. John Deere, the leaping deer symbol and John Deere’s green and yellow trade dress are the trademarks of Deere and Company.

It takes a special breed of oil to keep engines running in off-road conditions. That’s because Plus-50™ II Oil is specially formulated to keep engines running smoothly and efficiently in extreme off-road conditions. Tractors. UVs. Let John Deere Plus-50 II Oil be the one oil on your farm. Talk to your dealer today.

76

OIL & LUBRICANTS

Save time and money with John Deere bulk oil. If your fleet is using 330 gallons (1,250 liters) or more of a single product in a year, the John Deere bulk oil program can benefit your operations. Reduce your cost for oil, reduce the risk of contamination, and eliminate handling and disposal of packaged products with John Deere bulk premium lubricants. Visit your local John Deere dealer and ask to buy bulk John Deere Plus-50 II 15W-40 engine oil and/or Hy-GARD™ hydraulic/transmission oil.

Bulk Oil

Plus-50 II SAE 15W-40 and 10W-30, is made with a unique additive system that offers excellent protection from deposits and wear. It exceeds API service classification CK-4/SN and John Deere Severe Off-Road Dyno test. It’s excellent for diesel engines!■ Excellent product for current and older engines ■ Formulated specifically to inhibit engine wear, corrosion, sludge, soot, varnish,

and oxidation■ Extended drain intervals up to 500 hours in a John Deere engine, using a John Deere

filter and ULSD diesel■ Proven performance in low-emission IT4 and FT4 engines ■ Full-fleet solution and fully backwards compatible ■ Tested and developed for severe off-road applications

Plus-50™ II API CK-4/SN Engine Oil

Plus-50 II Premium Engine Oil (SAE 0W-40) is a full synthetic PAO (Poly Alpha Olefin) based oil and the New Plus-50 II engine oil (SAE 5W-40) is an all-season synthetic engine oil that provides excellent performance for customers who operate in extremely cold or hot conditions and want to maximize engine life performance in modern engines and is completely backwards compatible for older engines.

Plus-50™ II Synthetic SAE 0W-40 / New 5W-40 API CK-4/SN Engine Oil

77

OIL & LUBRICANTS

78

NUMBER DESCRIPTION SIZE

SWDEF025 John Deere Diesel Exhaust Fluid 9.46 L (2.5-gal.)

SWDEF055 John Deere Diesel Exhaust Fluid 208 L (55-gal.)

SWDEF275 John Deere Diesel Exhaust Fluid 1,041 L (275 gal.)

SWDEF330 John Deere Diesel Exhaust Fluid 1,249 L (330-gal.)

When you are looking for hardworking, standard-interval engine oil, Torq-Gard is a great choice. It protects in a broad range of applications, including 4-stroke diesel, natural gas, and gasoline engines. Available in 15W-40, 10W-30, 5W-30, and 30.■ Neutralizes acid to reduce corrosion■ Provides sludge control for cleaner engines■ Many viscosity grades offered for application in moderate to very cold

operating temperatures■ Low-temperature fluidity for reduced engine startup wear

Torq-Gard™

Turf-Gard motor oil is recommended for all 4-cycle gasoline engines in lawn and garden tractors, riding mowers, generators, and other outdoor power equipment. Turf-Gard keeps engines clean and provides superior engine wear protection and fuel efficiency.

Turf-Gard™


TY25121 SAE 5W-30 1-qt.

TY22029 SAE 10W-30 1-qt.

See us for pricing.

With John Deere Diesel Exhaust Fluid, you can be confident you’re getting a high-quality product that will provide unsurpassed performance while protecting your equipment investment. Simplify your operation by making John Deere your one source for quality fluids.

John Deere Diesel Exhaust Fluid

See us for pricing.

Break-In Plus is a special purpose engine oil developed to be used in rebuilt or remanufactured engines and new John Deere engines during the initial break-in period/oil service interval. During the initial operation of a new or rebuilt engine with Break-In Plus, change the oil and filter between a minimum of 100 hours and a maximum of up to 500 hours. Check your operator manual for the maximum interval recommendation.

Break-In Plus provides two major differences from the traditional Break-In Oil: ■ Meets the oil requirements for Final Tier 4 (FT4), interim Tier 4 (IT4), and supports

all legacy engines■ Maximum drain interval up to 500 hours

Break-In Plus Engine Oil

OIL & LUBRICANTS

79

Cool-Gard™ II High Performance Long-life, Heavy-duty Formula.■ Formulated for up to 6-years/6,000-hours* life in cooling systems of diesel

and gas engines■ Supports advanced engine technology ■ Protects against corrosion and deposits ■ Extends water pump life and prevents liner cavitation ■ High thermal and oxidation protection ■ Ready-to-use 50/50 premix formula for freeze protection down to -34°F (-37°C) ■ Contains bittering agent to help discourage accidental ingestion■ Less toxic (PG) propylene glycol available for use around animals

*Rating applies when complete cooling system flush is performed prior to use.

Antifreeze/Coolant

See us for pricing.


Cool-Gard II:

TY26573 Concentrate 1-U.S. gal.

TY26574 Concentrate 55-U.S. gal.

TY26575 Pre-mixed 1-U.S. gal.

TY26576 Pre-mixed 2 1/2-U.S. gal.

TY26577 Pre-mixed 55-U.S. gal.

TY26578 Pre-mixed 330-U.S. gal. tote

TY26968 PG, Pre-mixed 1-U.S. gal.

TY26969 PG, Pre-mixed 55-U.S. gal.

TY26970 PG, Pre-mixed 330-U.S. gal. tote

Hy-Gard™ oils are specifically developed to meet the exact requirements of transmissions, wet clutches, wet brakes, and hydraulic systems. Oils not meeting these exact specifications can compromise machine or component life.

Hy-Gard performance tested both in lab and in the field and approved by John Deere engineers to meet the increase demands for performance and protection of transmission and hydraulic systems.

Hy-Gard Oil Available in 1-, 2 1/2-, 5-, 30-, 55-, and 220-gallon containers. ■ Recommended for equipment with common system reservoirs or separate

transmission and hydraulic systems■ Exceeds JDM J20C specification

Low-Viscosity Hy-Gard Oil Available in quarts and 1-, 5-, and 55-gallon containers. ■ Use in place of Hy-Gard oil in cold weather ■ Exceeds JDM J20D specification

Bio Hy-Gard II Oil Available in 5- and 55-gallon containers. ■ Formulated from conola-based oil ■ 94% Biodegradable ■ Use in place of mineral-based hydraulic oils

Transmission and Hydraulic Oil

OIL & LUBRICANTS

80

Don’t let problematic fuel cause damage or downtime. Fuel-Protect Conditioners help you keep going all season by preventing fuel system erosion caused by poor fuel quality. With Fuel-Protect, you’ll notice smoother starting and less exhaust smoke.

Diesel Fuel Conditioner

NUMBER DESCRIPTION SIZE LIST

TY27722 Fuel Conditioner 16-oz. $ 8.93

TY27723 Fuel Conditioner 1-gal. $ 51.67

TY27724 Fuel Conditioner 5-gal. $251.97

TY27725 Cold Weather Diesel Fuel Conditioner 16-oz. $ 6.88

TY27726 Cold Weather Diesel Fuel Conditioner 1-gal. $ 38.73

TY27727 Cold Weather Diesel Fuel Conditioner 5-gal. $191.07

GL-5 and Synthetic GL-5 lubricant is designed for severe on- and off-highway applications. Its superior thermal stability and oxidation resistance keeps gears and seals clean, while its thermal durability protects gears from physical damage by preventing heat-induced failure of anti-wear chemistry.


Synthetic GL-5 Gear Lube:

TY26372 80W-140 1-qt.

TY26373 80W-140 5-gal.

TY26374 80W-140 16-gal.

TY26375 75W-90 1-qt.

TY26376 75W-90 5-gal.

TY26377 75W-90 16-gal.

GL-5 Gear Lube:

TY6296 80W-90 1-qt.

TY26815 80W-90 1-gal.

TY26816 80W-90 5-gal.

TY26817 80W-90 30-gal.

TY6345 85W-140 1-qt.

TY26812 85W-140 1-gal.

TY26813 85W-140 5-gal.

Synthetic Gear Lubricant for Combine Feederhouse Drives:

TY26408 HD460 1-qt.

GL-5 and Synthetic GL-5 Gear Lube

See us for pricing.

Keep Clean: Specifically formulated for high pressure diesel fuel systems. Prevents and limits formation of deposits that cause injector sticking, misfire, rough idling, power loss or hard starting conditions. Microbiocide: Antimicrobial fuel preservation additive recommended for control of bacteria and fungi in fuel systems. Emergency Thaw: Dissolves gelled diesel fuel and melts ice in the fuel filter caused by freezing conditions, restoring fuel flow to the engine.

Fuel Protect Keep Clean Fuel System Cleaner

NUMBER DESCRIPTION SIZE LIST

TY26827 Keep Clean 946 ml (32-oz.) See Us

TY26828 Keep Clean 3.78 L (1-gal.) See Us

TY26829 Keep Clean 18.9 L (5-gal.) See Us

TY26830 Keep Clean 208 L (55-gal.) See Us

PM701014US FQS 1.5 Microbicide 946 ml (32-oz.) / Pkg. qty. 4 $47.51

TY27730 Emergency Thaw 946 ml (32-oz.) $ 9.88

81

In the field, the right battery can make a big difference—and the right battery for your John Deere equipment is StrongBox™. It’s the best battery you can use in your machinery because it’s developed and tested right alongside John Deere equipment. Our engineers designed StrongBox with the following benefits to give you a better battery:

■ Increased power for quick starts in extreme cold■ High cranking amps, faster charges, and efficient design for lowering electrical resistance■ Epoxy-anchored plates that are four times stronger than traditional plates to reduce vibration damage—

the leading cause of failure in commercial batteries

StrongBox has also been proven to deliver better performance—up to eight times longer than its competitors. We even proved it with extensive testing against the top competitors in the industry.

Don’t chance it with standard batteries. Power up with batteries built for the rugged conditions you face. Power up with StrongBox.

Keep it in the field longer. Trust John Deere batteries to get you through the season and beyond.

BATTERIES, CHARGERS, AND ACCESSORIES

82

Battery Cleaner and Terminal Corrosion PreventativeNUMBER DESCRIPTION LIST

TY25767 Battery Cleaner (15-oz.) $4.44

TY25766 Terminal Corrosion Preventative (10-oz.) $5.44

John Deere offers 2-gauge and 4-gauge Booster Cables in a variety of service options: extra heavy-duty professional, commercial, heavy-duty professional, and heavy-duty commercial.

Booster Cables


2-Gauge and 4-Gauge 100% Copper Conduits:

TY26217 Booster Cable, Extra Heavy-duty, 20-ft., 2-gauge $114.64

TY26215 Booster Cable, Commercial Service, 16-ft., 4-gauge $ 68.51

TY26216 Booster Cable, Commercial Service, 20-ft., 4-gauge $ 81.39

2-Gauge and 4-Gauge Copper Clad:

TY27301 Booster Cable, Heavy-duty Professional, 20-ft., 2-gauge w/ bag $ 72.80

TY27302 Booster Cable, Heavy-duty Commercial, 16-ft., 4-gauge w/ bag $ 50.95

John Deere StrongBox alkaline batteries deliver long-lasting, dependable, powerful performance for the devices you use everyday—from flashlights to portable radios and many other electronic devices.

StrongBox™ Alkaline Batteries


TY26865 AAA – 4-Pack $4.97

TY26866 AAA – 8-Pack $8.71

TY26867 AA – 4-Pack $4.97

TY26868 AA – 8-Pack $8.71

TY26869 C – 4-Pack $9.97

TY26870 D – 4-Pack $9.97

TY26871 9V – 2-Pack $8.86

83

TY27731

Battery AccessoriesMake John Deere your one-stop shop for battery accessories. Our wide selection of battery accessories includes terminals, terminal brushes, bolts, corrosion preventative, and terminal cleaner—everything you need! See us today for the complete Battery Accessories lineup.

Excellent for extending battery life for seasonally-used turf and utility equipment. Automatically maintains both 6- and 12-volt batteries, keeping them at full charge by using float-mode monitoring. Charger has AGM charging capabilities.

Automatic Battery Charger and Maintainers*

*Not available in California.

NUMBER LIST NOW

1.5 Amp

TY25866 $38.07 $32.36

TY26328 (on-board) $36.16 $30.74 TY26328

The Automatic 3A Battery Charger and Maintainer is perfect for extending battery life on seasonally-stored ag equipment by maintaining the charge when the battery isn’t in use. The maintainer/charger comes with an easy-to-read scrolling display that provides step-by-step instructions, and it can be used on 6- and 12-volt batteries. Charger has AGM charging capabilities.

Automatic 3A Battery Charger and Maintainer

NUMBER LIST NOW

TY27265 $60.58 $51.49

Automatic Battery ChargersNUMBER DESCRIPTION LIST NOW

TY27731 250-amp 12V and 125-amp 6V Engine Start Wheel Charger $258.86 $220.03

TY27732 200-amp 12V and 125-amp 6V Engine Start Benchtop Charger $190.14 $161.62

TY27733 50-amp 12V Engine Start Benchtop Charger $ 89.30 $ 75.91

TY25866

TY27265

TY27732

TY27733

BATTERIES, CHARGERS, AND ACCESSORIES

84

The Ultracapacitors are lightweight, compact tools that are great for jump-starting any 12V off-road or on-road vehicle up to an 8.1L V8. This is a practical tool to jump-start vehicles at the farm, jobsite, and more. For gasoline and diesel engines.

Ultracapacitor – Batteryless Jump-Starter


SWDSR108 450A Ultracapacitor – Batteryless Jump-Starter (up to 6.0L) $207.42 $176.31

With the ever changing selection of devices available, it is important to choose the right charger to fit the device’s need. Charge your mobile devices faster than ever in any John Deere application, personal vehicle, or at home with the variety of PowerUp™ USB chargers and cables made available by your John Deere dealer.

USB Chargers and Cables


PM191-052901 Dual USB Chargers – 4.8A $15.37

PM191-054448 3-in-1 Charger w/ 6-ft. Apple Cable $29.25

PM191-052079 USB Charger – Wall Charger w/ 2.4A Single USB $13.37

PM191-050594 USB Cable – Apple, 6-ft. $21.08

PM191-050860 USB Cable – Type C, 6-ft. $15.37

PM191-050563 USB Cable – Micro USB, 6-ft. $10.75

PM191-052901 PM191-054448

PM191-052079 PM191-050594

PM191-050860 PM191-050563

MISCELLANEOUS

85

AM/FM/WB/iPod®/iPhone®/ SiriusXM™ Heavy-Duty Radio

A

SWJHD1630$246.05 $231.29

A

Designed to be one of the most rugged stereos in the industry, this heavy-duty radio delivers high-quality audio while withstanding some of the harshest working conditions.

B

Boldly go where no radio has gone before. The weatherproof Jensen SWJHD906BT radio brings news, weather, and Bluetooth® capabilities to Gators, Skid Steers, and Open-Station Tractors. You get NOAA Weatherband with weather alert, AM/FM radio, Bluetooth playback, controls, and the ability for hands-free calling (external microphone SWJMICHFP sold separately), and an input to play iPod, MP3 player, or portable CD player.

Mini 906BT RadioB

SWJHD906BT

$307.80 $289.33 *Heavy-Duty Mini Speakers (SWJXHD35) sold separately.

*Heavy-Duty Mini Speakers (shown)

sold separately.

C

The SWJHD1365BT stereo is built tough for demanding environments while featuring the latest technological advancements. This radio features Bluetooth streaming audio (microphone included) with hands-free calling, giving you a truly hands-free experience. The iPod/iPhone capabilities can be taken advantage of via the USB so you can take your personal music library with you. Plus, the stereo is also SiriusXM-ready, offering you endless entertainment options.

AM/FM/WB/iPod- & iPhone-ready/SiriusXM/ Bluetooth Stereo

C

SWJHD1635BT$307.08 $288.66

E

In today’s modern heavy-duty market, having a radio built to survive the tough stuff doesn’t mean that it has to sacrifice in-demand entertainment options. The SWJHD36MIC features the ability to receive Bluetooth streaming audio and phone calls from a Bluetooth-enabled mobile phone, giving you a truly hands-free experience. The microphone required for hands-free calling comes standard with the radio. This state-of-the-art heavy-duty stereo also has NOAA 7-channel Weatherband tuner with S.A.M.E technology to focus on a more specific region, giving you more accurate weather updates along with being iPod- and SiriusXM radio-ready.

AM/FM/WB/CD/USB/Bluetooth®/iPhone/ iPod/SiriusXM Stereo

E

SWJHD36AMIC$337.04 $316.82

We made the cab quiet. Now give your ears something to listen to.

If your cab radio is dead, dying, or just plain dysfunctional, consider an audio upgrade. Tune in to local news, weather, and sports, or bring your own audio stimulation via CD or MP3. Satellite news and music are also an option.

D

Pull in AM/FM and weather-band signals. This new heavy-duty radio has a full 7-channel NOAA Weatherband tuner and tells the time with the new segmented high-visibility display. It also comes with front Aux in capabilities and is equipped with a two-wire hookup that prevents battery drain when the vehicle is off.

AM/FM/WB Heavy-Duty RadioD

SWJHD1130$168.68 $158.56

MISCELLANEOUS

86

It’s not X-ray vision—but it’s the next best thing. This one-camera digital observation system far exceeds the performance of any other analog system on the market. It features a WiSight signal so strong that it easily transmits through and around objects up to 60 feet away—with no interference.Other benefits: ■ Delivers a sharp, vivid picture with the 5.6-in. color LCD monitor■ Suction cup mount and 12-volt DC power plug for the monitor make this system

easily portable among vehicles■ Wireless for easy and convenient setupApplications: ■ Tractors and round balers ■ Sprayers ■ Trucks and trailers ■ Recreational vehicles ■ Industrial ■ Marine

ToughCam Digital Wireless Observation System

NUMBER LIST

SWWVOS5MDCL1 $605.99

Just load it up and strap it down with our versatile tie-down straps. From securing ladders to the roof of your SUV to strapping large bales to your trailer, John Deere tie-down straps work for just about anything. Release load tension under control with reversing action design, and larger handles and release bars.

Ratchet Straps

NUMBER DESCRIPTION LISTTY27478 11/4-in. x 16-ft. Reversible Ratchet and Double J Hooks,

1,000-lb. WLL / 3,000-lb. break strength$20.56

TY27476 11/2-in. x 20-ft. Reversible Ratchet and Double J Hooks, 1,665-lb. WLL / 5,000-lb. break strength

$26.39

TY27477 2-in. x 27-ft. Reversible Ratchet and Round J Hooks, 3,330-lb. WLL / 10,000-lb. break strength

$39.92

TY27480 2-in. x 27-ft. Reversible Ratchet and Flat Hooks, 3,330-lb. WLL / 10,000-lb. break strength

$39.91

TY27479 2-in. x 40-ft. Reversible Ratchet and Double J Hooks, 3,330-lb. WLL / 10,000-lb. break strength

$42.47

Over time the o-rings between the turret and nozzle body get dusty, which makes rotating the nozzle body difficult when changing between nozzles. Parker Super O-lube is the John Deere preferred product for lubricating o-rings on sprayers with our new ExactApply™ nozzle bodies, as well as those on older machines.

Features/Benefits: ■ High-viscosity silicone oil that can be used with virtually any rubber polymer over

temperatures ranging from -65°F to 400°F (-54°C to 204°C)■ Will not clog 30-micron filters ■ Recommended for high pressure systems

Nozzle Body Turret O-Ring Lubricant


PMH3503 Super O-Lube, 2-oz. tube $20.52 $19.29

87

Making Easy, EasierNow this industry exclusive has become even easier with John Deere’s new easy change oil filter home maintenance kit. This maintenance kit contains nearly everything you need to tune up your machine in one convenient package, with one major bonus. No tools required. Twist. Lock. Done.


AUC13705 E120, E130, E150 $70.52 $63.47

AUC13706 E160 $81.55 $73.40

AUC13707 E170, E180 $82.13 $73.92

No need to take your machine to the shop for a tune-up. Our Home Maintenance Kits make it easy to tune up your lawn tractor or Gator™ by providing almost everything you need in one convenient package: ■ 2 quarts oil ■ 1 oil filter ■ 1 air filter ■ 1 fuel filter ■ Air precleaner ■ Spark plugsCheck out some of our kits below. If you don’t see your machine listed, don’t worry. There are many other kits available. See us to get the appropriate kit for your machine.

Tune Up and Head Out

NUMBER APPLICATION LIST NOW100 Series:

LG262 D110 (SN 500,001-), D120, E110 $45.07 $40.56

LG264 D155 (SN -700,000), D160, D170 $56.96 $51.26

LG266 D105 (SN -200,000), D110 (SN -500,000), E100 (49 states) $41.62 $37.46

LG268 D150 (SN 700,001-), D160, D170 $56.30 $50.67

LG272 D130 (SN 000,000–040,000), D140 (SN 000,000–050,000) $47.56 $42.80

LG275 D105 (SN 200,001-), D125, D130 (SN 400,001-), D140 (SN 400,001-), E140 $39.45 $35.51

EZtrak™ and Residential ZTrak™:

LG249 Z445 (SN -100,000) and Z465 (SN -150,000), Z540M, Z540R; Z645 (SN 140,001-), Z655 (SN 140,001-), Z665 (SN 140,001-)

$49.62 $44.66

LG263 Z425 (SN -040,000) $48.22 $43.40

LG264 Z425 (SN 040,001–100,000) $56.96 $51.26

LG265 Z445 (SN 140,001-), Z465 (SN 150,001-); Z540M, Z540R; Z645 (SN 140,001-), Z655 (SN 140,001-), Z665 (SN 140,001-) $48.44 $43.60

LG268 Z525E (010,001), Z375R (040,001), Z425 (SN 100,001), Z225, Z245 $56.30 $50.67

LG269 Z435, Z465 (Briggs Engine); Z445 (SN 100,001–140,000), Z535M (010,001-), Z535R (010,001-), Z625, Z645 (SN 100,001–140,000), Z655 (SN 100,001–140,000), Z665 (SN 100,001–14)

$56.41 $50.77

LG276 Z235, Z255, Z335E, Z335M, Z345M, Z345R, Z355E, Z355R, Z535M, Z535R $44.77 $40.29

Select Series™:

LG249 X320 (SN -180,000), X324 (SN -180,000), X340, X360 (SN -180,000), X500 (SN -060,000), X530 (SN -060,000), X534 (SN -060,000)

$49.62 $44.66

LG256 X300 (SN -180,000), X300R (-150,000), X304 (SN -180,000) $45.62 $41.06

LG257 X520, X540 (SN 010,001-) $82.72 $74.45

LG265 S240, X300 (SN 180,001-), X300R (150,001-) X304 (SN 180,001-), X310, X320 (SN 180,001-), X324 (SN 180,001-), X350, X350R (010,001-), X354, X360 (SN 180,001-), X370, X380, X384, X390, X394, X500 (SN 060,001-), X530 (SN 060,001-), X534 (SN 060,001-), X570, X580, X584, X590

$48.44 $43.60

LG277 X330 $50.52 $45.47

Signature Series:

LG244 X720, X724, X728, X729, X730, X734, X738, X739 $93.60 $84.24

LG245 X700, X710 $87.91 $79.12

LG260 X740, X744, X748, X749, X750, X754, X758 $71.38 $64.24

88

MowerPlus is the app you need to keep your John Deere riding mower running well and your lawn looking great. It tracks and records yard tasks and serves as a one-stop shop for seasonal care tips and maintenance activities. Know your mower and know how you mow with John Deere’s MowerPlus app. Contact your Dealer today!

MowerPlus Smart Connectors

NUMBER DESCRIPTION APPLICATION LIST NOWBUC10537 Bluetooth Module for Select Series X300, X500 Series $99.51 $89.56

BUC10510 Bluetooth Module 100 Series 100 Series $79.00 $71.10

RIDING LAWN EQUIPMENT PARTS

89


Z700 Series Attachments:

LPA11548 Sun Shade $169.00 $152.10

BUC10775 String Trimmer Rack $100.59 $ 90.53

BUC10303 Bucket Holder $171.20 $154.08

BUC10301 Light Kit $272.86 $245.57

BUC10826 Yard Tool Kit $ 46.01 $ 41.41

Z500 Series Attachments:

BUC10107 Mat Kit, Foot Mat Kit Z500 E/M $ 39.59 $ 35.63

AM137437 Kit, Plates, Foot Rest Extensions $ 63.16 $ 56.84

LP63764 ZTrak MY16 Accel 48/54-in. Grass Groomer $114.95 $103.46

BUC10071 Light Kit, Premium Handlebar ZTrak $299.60 $269.64

3500 Series Attachments:

BUC10656 Mat Kit, Foot Mat Z300 E/M $ 39.59 $ 35.63

BUC10040 Steering Controller, Premium Handle $ 99.51 $ 89.56

BM24357 Light Kit $307.09 $276.38

AM143587 Kit, Seat Slide Option $280.90 $252.81

ZTR Attachments

Provides an efficient means for picking up leaves and grass clippings. The dual-bag system is easy to empty because you unload one bag at a time. Excellent for difficult bagging conditions when grass is very heavy, long, or wet. Requires blower, discharge chute, and bagger assembly.See us for MCS options for other riding lawn equipment models.

Material Collection System


BM21681 Chute X700 Signature Series Mowers $115.56 $104.00

BM20780 7-Bushel Hopper X700 Signature Series Mowers $507.19 $456.47

BG20867 54HC Power Flow X700 Signature Series Mowers $674.10 $606.69

BM20714 Click-N-Go Bracket X700 Signature Series Mowers $119.84 $107.86

Keep your tractor free from scratches and scrapes with our front-end brush guard. With its welded construction made of large-diameter tubing and thick steel plates, it provides superior protection for the front grille, lights, and hood.

Heavy-Duty Brush Guard

NUMBER APPLICATION LIST NOWBM23057 X300 and X500 Select Series Tractors $131.61 $118.45

BM20880 X700, X720, X724, X728, X729, X740, X744, X748, X749 $264.29 $237.86

BM24375 X710, X730, X734, X738, X739, X750, X754, X758 $264.29 $237.86

Available to replace the tractor’s standard front bumper. Makes Quik-Tatch™ weights an alternative to front-wheel weights for adding front ballast.

Front Weight Bracket/Bumper


BM25370 X300 Select Series Tractors and X500 (SN 020001-), X530, X534 (SN 060001-)

$71.69 $64.52

90

XUV835MNUMBER DESCRIPTION LIST NOW

Ag Management Solutions:

BUC10634 AMS Integration Kit $ 380.91 $ 342.82

Cabs/Roofs/Windshields:

BUC10977 Cab Doors $3,158.64 $2,842.78

BM25990 Cab Rear Panel $ 545.70 $ 491.13

BM26642 Heater $ 898.80 $ 808.92

BUC10574 Full Windshield $ 722.26 $ 650.03

BM25993 Half Windshield $ 361.66 $ 325.49

Radios/Speakers:

BUC10615 Base Radio $ 388.41 $ 349.57

BUC10619 Premium Speaker Kit $ 944.81 $ 850.33

Cargo Box Options:

BM26414 Cargo Box $ 908.43 $ 817.59

BM22775 Side Tool Rack $ 339.19 $ 305.27

BM24901 Cargo Box Side Extension Kit $ 524.30 $ 471.87

Hitches:

BM22290 Drawbar/Ball Mount $ 43.87 $ 39.48

A-7A5301 Hitch Ball 48mm $ 10.41 $ 9.37

A-7A5302 Hitch Ball 51mm $ 10.36 $ 9.32

Winch:

BUC10682 WARN® ProVantage 4,500-lb. Winch $ 742.59 $ 668.33

Gator™ Utility Vehicle

PROTECT.MAP.LIFT.HAUL.PULL.

■ Power Lift Kit■ AMS integration Kit■ Side Tool Rack■ Bucket Holder■ Draw Bar■ Ball Mount

■ Winch■ Stereo Mount Kit and Stereo■ Underbody Armor Kit■ Cab – Poly or Deluxe■ Cab Heater

You’ve got ground to coverand work to do. Get some help with that to-do list when you outfit your Gator with these tools:

See your John Deere dealer for more suggested parts, attachments, and accessories so you can tackle every task with your Gator Utility Vehicle.

GATOR PARTS

91

Provides more integrated sealed storage in the cargo box.

Cargo Box Toolboxes

NUMBER DESCRIPTION APPLICATION LIST NOWBM26162 Top-Opening Toolbox Heavy-Duty XUVs, TX, TX Turf,

TE, and TH Models$843.16 $758.84

BM26160 Side-Opening Toolbox Heavy-Duty XUVs, TX, TX Turf, TE, and TH Models

$843.16 $758.84

BUC10393 Tailgate with Brake and Tail Lights

Heavy-Duty XUVs, TX, TX Turf, TE, and TH Models

$370.21 $333.19

BM26220 Label Kit – Green and Yellow Heavy-Duty XUVs, TX, TX Turf, TE, and TH Models

$ 23.54 $ 21.19

Washable rubber floor mats provide an added layer of protection to the floor of the vehicle, guarding against dents, dings, and scratches.

Floor Mats

NUMBER DESCRIPTION APPLICATION LIST NOWBM25743 Floor Mat – Front XUV550, XUV560, XUV590i,

RSX850i, RSX860i$ 85.60 $ 77.04

BM25744 Floor Mat Kit XUV590i S4 $171.20 $154.08

BM24282 Floor Mat – Front XUV 625i, 825i, 825i S4, 855D, 855D S4

$ 85.60 $ 77.04

BM24283 Floor Mats – Rear XUV 825i S4, 855D S4 $ 85.60 $ 77.04

BM26462 Floor Mats (2) XUV835/865 $ 85.60 $ 77.04


BM26414 Cargo Box Power Lift XUV835/865 $908.43 $817.59BUC10682 WARN® ProVantage 2041

(4,500-lb.) WinchXUV835/865 $742.59 $668.33

BM21392 Winch Accessories Kit XUV835/865 $141.24 $127.12

BUC10679 Brush Guard XUV835/865 $379.86 $341.87

BM22841 Brush Guard XUV825/855, HPX $272.86 $245.57

BM23365 Brush Guard XUV560/590 $358.46 $322.61

BM22767 Rear Bumper XUV835/865/825/855 $257.87 $232.08

BM23362 Rear Bumper XUV560/590, RSX $210.79 $189.71

BUC10247 Front Fender Guard XUV835/865 $228.99 $206.09

BM23394 Front Fender Guard XUV560/590 $197.96 $178.16

BM26129 Cargo Box Fender Guard XUV835/865 $209.71 $188.74

BM22811 Cargo Box Fender Guard XUV825/855, TX/TE $209.71 $188.74

BUC10761 CV Guards – Front and Rear XUV835/865 $251.46 $226.31

Get your guard up with a full array of custom protection options that look great, too.

Power and Protection

92


BM26215 LED Driving Lights XUV, RSX, HPX Gators $359.51 $323.56

BM26216 LED Work Lights XUV, RSX, HPX Gators $359.51 $323.56

BM25619 LED Mounting Kit – Brushguard XUV, RSX, HPX Gators $123.06 $110.75

BM25620 LED Mounting Kit – Front Roof XUV, RSX, HPX Gators $ 89.89 $ 80.90

BM25731 LED Mounting Kit – Rear Roof, 2-Passenger XUV, RSX, HPX Gators $ 86.67 $ 78.00

BM25621 LED Mounting Kit – Rear Roof, 4-Passenger XUV825 S4, XUV855 S4, XUV560 S4, XUV590 S4 $ 89.89 $ 80.90

Gator LED Lights

Not only do LED bulbs last up to 50 times longer than sealed beam halogen lights, they also consume less energy. Experience bulbs that will run cooler, shine brighter, and last longer—order these must-have lights today.

Get ultimate visibility with a deluxe light kit. Includes front and rear turn signals, reverse lights, and four-way flashers. The switch mounts on the dash of the vehicle, and the wiring harness connects to the standard vehicle harness.

NOTE: Not intended for use on public roadways.

Deluxe Light Kit

NUMBER DESCRIPTION APPLICATION LIST NOWBM26180 Deluxe Light Kit XUV550, XUV550 S4, XUV560,

XUV560 S4, XUV590, and XUV590 S4

$348.81 $313.93

BM25545 Deluxe Light Kit (shown) Model Year 2011–Current XUV625i, 825, 825 S4, 855, 855D S4

$270.71 $243.64

BM24831 Deluxe Light Kit RSX850i, RSX860 $422.66 $380.39

For Gator Utility LED strobe light—sealed against water, dust, corrosion—with dash-mounted on/off rocker switch.

Beacon Light


BM26185 Beacon Light XUV835/865 $257.87 $232.08

BM22405 Beacon Light T-Series $409.81 $368.83

BM21649 Beacon Light – Deluxe XUV825/855, HPX, T-Series $409.81 $368.83BM25553 Beacon Light – OPS XUV825/855, HPX,

XUV560/590, RSX$257.87 $232.08

GATOR PARTS

93

Outdoor enthusiasts can get four-season weather protection with this rear panel and door kit for the OPS Poly Cab. Requires the OPS Poly Roof – Black and one of the following windshields: OPS Full No-Scratch Windshield or OPS Glass Windshield with Wiper.

Poly Cab


BM24561 OPS Poly Cab Rear Panel XUV625i, XUV825i, XUV855D, XUV825i S4, XUV855D S4

$ 561.76 $ 505.58

BM25147 OPS Poly Cab Rear Window XUV625i, XUV825i, XUV855D, XUV825i S4, XUV855D S4

$ 345.61 $ 311.05

BUC10292 OPS Poly Cab Door Kit XUV625i, XUV825i, XUV855D $2,824.80 $2,542.32

BUC10293 OPS Poly Cab Door Kit XUV825i S4, XUV855D S4 $5,537.26 $4,983.53

Choose one of two OPS windshields for added comfort and protection. Additionally, one of these windshields should be selected to complete the OPS Poly Cab.

OPS Windshield Options


BM25922 OPS Full No-Scratch Windshield

XUV625i, XUV825i, XUV855D, XUV825i S4, XUV855D S4

$ 595.99 $ 536.39

BUC10210 OPS Glass Windshield with Wiper

XUV625i, XUV825i, XUV855D, XUV825i S4, XUV855D S4

$1,118.16 $1,006.34

BM25103 OPS Windshield Washer Kit For use with OPS Glass Windshield with Wiper

$ 327.41 $ 294.67

BM24089 OPS Switch Bank Required for Windshield Washer Kit

$ 78.11 $ 70.30

The weatherproof SWJHD906BT Radio brings news, weather, and our iPod/MP3 to your Gator. You get a NOAA weather band with weather alert, AM/FM radio, and input to play a smartphone, MP3, or portable CD player. If your Gator is already set up for a radio head unit, or if you’re looking for a replacement, the SWJHD1635BT radio features everything you will need. This radio has Bluetooth streaming audio (microphone included) with hands-free calling, Sirius XM, NOAA Weatherband, and USB port.

Radios


SWJHD906BT AM/FM/WB Mini-Radio with Auxiliary Input $307.80 $289.33SWJHD1635BT AM/FM/WB/iPod- & iPhone-ready/SiruisXM/Bluetooth $307.08 $288.66 SWJHD1635BT

SWJHD906BT

The weatherproof SWJAHD240BT is on the forefront of technology with integrated Bluetooth technology allowing users to stream their audio content using a Bluetooth-enabled device. Pair this amplifier with the 3.5" SWJXHD35 heavy-duty mini-box speakers, and it will offer a full range of audio entertainment. These speakers are exclusively designed to withstand the challenges of off-road and outdoor environments.

* Heavy-Duty Mini Speakers sold as pair.

Weatherproof Bluetooth Amplifier and Heavy-Duty Mini Speakers


SWJAHD240BT Weatherproof Bluetooth Amp $115.43 $108.50

SWJXHD35 Weatherproof 3.5" Heavy-Duty Speakers $ 74.64 $ 70.16

SWHD240BTKIT Bluetooth Amp and 3.5" Speaker Kit $176.25 $165.68

SWJXHD35

SWJAHD240BT

When you buy John Deere equipment, you get one of the best warranties in the business. With the PowerGard™ Protection Plan Residential, add up to four years of coverage beyond the normal warranty term on all utility vehicles, riding lawn equipment, zero-turn radius mowers, and compact and utility tractors. You’ll get extended protection with $0 deductible and no out-of-pocket costs on covered repairs. Plus, transportation for factory warranty and extended protection repairs is covered!If you decide to sell or trade your equipment before the end of the coverage term, the remaining coverage is fully transferable to the next owner. Lower cost, low-deductible Powertrain and Engine Protection Plans are also available.Call or stop by today so we can customize your peace-of-mind plan.

JohnDeere.com/PPPR

Make your peace of mind last.

GATOR PARTS

Compatible with poly roof, on the OPS alone, or with Deluxe Cab. Kit includes components to mount a StarFire™ receiver and GreenStar™ display (sold separately). Use for boundary mapping, flagging field obstacles, and soil sampling.

AMS Integration Kit

NUMBER DESCRIPTION APPLICATION LIST NOWBM25035 Poly Roof or OPS Model Year 2011 to current HPX,

XUV625i, XUV825, XUV855, XUV825 S4, XUV855 S4

$380.91 $342.82

BM25589 For Deluxe Cab Model Year 2011 to current HPX, XUV625i, XUV825, XUV855, XUV825 S4, XUV855 S4

$380.91 $342.82

BUC10634 Poly Roof or OPS XUV835/865 $380.91 $342.82

John Deere Tire SealantJohn Deere Tire Sealant is a proven preventative maintenance tool. Protect your tires against air loss and save money from reduced downtime for the life of your tires.Other benefits include: ■ Puncture sealing up to 1/4-inch in diameter ■ Rim and bead sealing ■ Dry rot and crack prevention


TY26370 Tire Sealant, 16-oz. $ 11.79


TY16236 Tire Sealant with Hand Pump, 1-gal. $ 48.63

TY15833 Tire Sealant, 5-gal. $141.83

Three-directional louvers provide complete operator comfort and windshield defrosting. Kit includes high-output two-speed heater, mounting hardware, coolant hoses, and electrical harness. Requires VGB10547 heater fitting kit for HPX and XUV625i gas engine models. Requires BM25593 heater fitting kit for XUV825i gas engine models. Requires VGB10548 heater fitting kit for HPX and XUV855D diesel engine models.

Cab Heater


BM23608 Cab Heater HPX Gas, HPX Diesel, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4

$1,159.89 $1,043.90

94

SUNBELT OUTDOOR PRODUCTS With over 66,000 turf prod-ucts for all makes of equip-ment, we are confident that we will have the parts that you need to keep running. Sunbelt offers a wide range of parts for a variety of out-door power equipment for almost every major brand of equipment. Whether it’s a push or walk-behind mower, lawn tractor, zero turn, string trimmer, stick edger, chainsaw, utility ve-hicle, or all-terrain vehicle, your John Deere dealer can provide the Sunbelt parts that fit your needs.

QUALITY PARTS & ACCESSORIES FOR ALL TYPES OF OUTDOOR POWER EQUIPMENT

Air filters • Bearings • Belts • Broadcast spreaders • Bushings • Brushcutter blades • Carburetors • Edger bladesElectric PTO clutches • Fuel filters and line • Inner tubes • Internal engine parts • Lawnmower blades • Mufflers • Oil

Pulleys • Safety products • Snow-thrower parts • Seats • Solenoids • Spark plugs • Spindles • Starters • SulkiesSwitches • Throttle cables • Tires • Trimmer heads and line • Workshop tools • Much, Much, More! 95

JohnDeere.com

JOHN DEERE TOYS

IMAGINATION AT PLAY JohnDeere.com

JOHN DEERE TOYS

IMAGINATION AT PLAY

96

CHEMICALS

97

John Deere Tire SealantJohn Deere Tire Sealant is a proven preventative maintenance tool. Protect your tires against air loss and save money from reduced downtime for the life of your tires.Other benefits include: ■ Puncture sealing up to 1/4-inch in diameter ■ Rim and bead sealing ■ Dry rot and crack prevention




TY16236 Tire Sealant with Hand Pump, 1-gal. $ 48.63

TY15833 Tire Sealant, 5-gal. $141.83

John Deere has the product you need, the quality and reliability you demand, and the prices you’ll like.

Cleaners, Chemicals, and Protectants


TY26352 All-Purpose Cleaner $4.64

TY26632 Electronic Contact Cleaner* $6.00

TY26101 Brake & Parts Cleaner* $4.97

TY26772 Brake & Parts Cleaner – Low VOC** $6.11

TY26357 Engine Cleaner $4.23

TY26355 Carburetor and Choke Cleaner* $4.23

TY26353 Penetrating Oil $4.53* Not available in these states: CA, CT, MD, and UT. ** Available in all states, including CA, CT, MD, and UT.

Multi-Purpose Spray Lubricant


TY6350 Multi-Purpose Spray Lubricant, aerosol $7.79

Use this superior lubricant in hundreds of applications. It’s a water-displacing, friction-reducing, lightweight, penetrating oil. It prevents rust and also works well to free up parts already seized by rust, scale, or corrosion. Will not harm electrical contacts, wood, vinyl, or paint.

A premium 80% Ether cold-weather starting fluid for all John Deere engines. Produces faster starts and incorporates an upper cylinder lubricant that provides a film of oil on cylinder walls to protect against dry starting.

80% Premium Ether Starting Fluid


RE556468 80% Premium Ether Starting Fluid $4.04

SOFT BLACK COATINGKeep your tillage equipment corrosion-free throughout the dormant season with Soft Black protectant from John Deere. Our non-clog formula applies easier and lasts longer—until it’s time to get back into the soil.

Protect your most valuable assets with John Deere paint.

Only from your John Deere dealer.

You already know farm machinery is your largest investment. So get the most out of it today—and for seasons to come—by protecting it with the best paint in the business.

Only genuine John Deere paint gives you the long-lasting, high-gloss finish that better shields your equipment from UV fading, rust, and corrosion. Or whatever else Mother Nature may throw at you.

Pick up a can now at your local John Deere dealer. Better yet... make it two cans.

98

HOME & WORKSHOP PRODUCTS

99

PR1-8GM

■ High performance induction electric motor ■ Quiet Technology – Significantly quieter than standard air compressors. ■ 1-year limited warranty

NEW Oil Less Air Compressors

NUMBER DESCRIPTION LISTHR1-2Q 1.0-hp Electric Motor, 120-volt, 2.4 cfm @ 90 psi 2.5-U.S. gal.

hand-carry model$225.00

HR1-20Q 1.5-hp Electric Motor, 120-volt, 4.0 cfm @ 90 psi 20-U.S. gal. portable model

$375.00

HR1-20QHR1-2Q

AC1-5GH

Air Compressors$100 rebate on 2-stage Air Compressors and $250 rebate on Diesel Air Compressors ■ Splash-lubricated cast iron crankcase ■ Cast-iron cylinder and housing ■ Single- or two-stage pumps available ■ Drain valves and pressure relief valve ■ 2-year warranty on AC Series; 1-year warranty on HR and PR Series

NUMBER DESCRIPTION LIST NOWHR1-5E 2.0-hp Electric Motor, 120-volt, 4.1 cfm @ 100 psi,

5-U.S. gal.hand carry model$ 445.00

HR1-20E 2.0-hp Electric Motor, 120-volt, 4.1 cfm @ 100 psi, 20-U.S. gal.portable model

$ 544.00

PR1-8GM John Deere Branded 212-cc Engine, 7.5 cfm @ 100 psi 8-U.S. gal. portable model

$ 819.00

PR2-8GM John Deere Branded 300-cc Engine,17.2 cfm @ 175 psi 8-U.S. gal. portable model

$1,335.00 $1,235.00

AC1-5GH Honda GX 118-cc Engine, 4.4 cfm @ 100 psi, 5-U.S. gal.hand carry model

$ 829.00

AC1-8GH Honda GX 196-cc Engine, 13.1 cfm @ 100 psi, 8-U.S. gal.wheelbarrow model

$1,029.00

AC2-8GH Honda GX 270-cc Engine, 17.2 cfm @ 175 psi, 8-U.S. gal.wheelbarrow model

$1,599.00 $1,499.00

AC1-20GH Honda GX 196-cc Engine, 13.1 cfm @ 100 psi 8-U.S. gal. portable model

$1,219.00

AC2-20GH Honda GX 270-cc Engine, 17.2 cfm @ 175 psi 20-U.S. gal. portable model

$1,739.00 $1,639.00

AC2-20GHS Honda GX 270-cc Engine, 17.2 cfm @ 175 psi 20-U.S. gal. stationary model

$1,699.00 $1,599.00

AC2-30GHS Honda GX 389-cc engine, 29.0 cfm @ 175 psi, 30-U.S. gal. stationary model

$2,659.00 $2,559.00

AC2-30KDS Kohler OHV 9.1 HP Diesel Engine, 29.0 cfm @ 175 psi 30-U.S. gal. stationary model

$4,699.00 $4,449.00

AC2-80ES 5.0-hp Engine, 230-volt, 16.9 cfm @ 175 psi 80-U.S. gal. vertical stationary model

$2,245.00 $2,145.00

AC2-80ES-1 7.5-hp Engine, 230-volt, 23.5 cfm @ 175 psi 80-U.S. gal. vertical stationary model

$2,439.00 $2,339.00AC2-80ES-1


100

AC2-CG35H-P

AC2-CG35KD

Compresserators™$100 rebate on 2-stage Compresserators and $250 rebate on Diesel Compresserators■ Combination air compressor / generator■ Perfect for any industrial application that requires both electrical power and

air; contractors and farmers alike will appreciate the convenience of the built-in generator system combined with the single- or two-stage air compressor pump

■ Includes a regulator and two gauges for tank and outlet pressure readings■ Features heavy-duty steel base-plate assembly to reduce vibration■ 14-gauge powder-coated two-piece belt guard with 1/4 turn release for quick

access to belts■ Ideal for contractors, service vehicles, and shops■ Models with “AC2” prefix include two-stage compressor pump■ Brushless 120V alternator■ Power available from 1,600 to 4,000 watts■ Options include electric start, stationary truck mounting kit, and 230V outlet■ Gasoline and Diesel engine options available

NUMBER DESCRIPTION LIST NOWAC1-CG16H 8-U.S. gal., 196-cc Honda GX, 10.9 cfm @ 125 psi,

1,600 watts output, portable$1,649.00

AC2-CG35H 8-U.S. gal., 389-cc Honda GX, 15.7 cfm @ 175 psi, 3,500 watts output, stationary

$2,595.00 $2,495.00

AC2-CG35H-P 8-U.S. gal., 389-cc Honda GX, 15.7 cfm @ 175 psi, 3,500 watts output, portable

$2,495.00 $2,395.00

AC2-CG35H-30 30-U.S. gal., 389-cc Honda GX, 15.7 cfm @ 175 psi, 3,500 watts output, stationary

$2,729.00 $2,629.00

AC2-CG40M-30 40-U.S. gal., 420-cc John Deere branded engine, 15.7 cfm @ 175 psi, 7,000 watts output, stationary

$2,389.00 $2,289.00

AC2-CG35KD 30-gal., 9.1HP Kohler Diesel, 15.7 cfm @ 175 psi, 3,000 watts output, stationary

$5,149.00 $4,899.00

AC2-CG40M-30

AC2-CW5170M-B

$250 rebate on Welderators Three machines in one! Powered by an industrial-duty engine, the Welderator combines a 170 amp arc (stick) welder, a two-stage air compressor, and a 5,000 max watt generator in a convenient, compact platform.

Other features include: ■ Amperage selector switch ■ Cast iron compressor pump ■ Receptacles: (2) 120V, 20A GFCI duplex and 120V/240V 20A twist lock

Welderators™

NUMBER DESCRIPTION LIST NOWAC2-CW5170M 420cc John Deere Branded Engine, 4,500/3,000 rated

watts, 15.7 cfm, 170A arc welder, 30-gal capacity air tank$4,699.00 $4,449.00

AC2-CW5170M-B 420cc John Deere Branded Engine, 4,500/3,000 rated watts, 15.7 cfm, 170A arc welder, base mount

$4,279.00 $4,029.00

AC2-CW5220H 688cc Honda V-twin Engine, 5,000/4,500 rated watts, 29.0 cfm, 220A arc welder, 20-gal capacity air tank

$7,949.00 $7,699.00

AC2-CW5170M


101

HR Series (Homeowner/Residential) ■ Axial pumps with stainless steel pistons ■ 1-year warrantyPR Series (Premium Series) ■ John Deere Branded OHV and Honda GX engines ■ Crankshaft pumps with solid-ceramic pistons ■ 2-year warrantyAC Series (Hot-Water Series) ■ High pressure hot water to clean grease, oil, soot, etc. ■ Top-fired burner design for better fuel efficiency and easy service ■ Burns diesel fuel or kerosene ■ 5-year warranty on pump; 3-year warranty on coil

Pressure Washers


Homeowner/Residential Series:

HR-1400E 1.5 HP Electric Motor 120V/13.5A, 1,400 psi @ 1.5 gpm $ 499.00

HR-2620GHV 160cc Gas, Honda GC, Vertical Shaft, 2,600 psi @ 2.3 gpm $ 509.00

HR-2620GMV 170cc Gas, OHV, Vertical Shaft, 2,600 psi @ 2.3 gpm $ 456.00

HR-2520GH 160cc Gas, Honda GC, 2,500 psi @ 2.8 gpm $ 589.00

HR-2800GH 187cc Gas, Honda GC, 2,800 psi @ 2.7 gpm $ 615.00

HR-2800GM 212cc Gas, OHV, 2,800 psi @ 2.7 gpm $ 529.00

Premium Series:

PR-3200GH 196cc Gas, Honda GX, 3,200 psi @ 2.7 gpm $ 799.00

PR-3200GM 212cc Gas, OHV, 3,200 psi @ 2.7 gpm $ 649.00

PR-3200GHA 196cc Honda GX, 3,200 psi @ 2.7 gpm, Lightweight Aluminum Frame $ 899.00PR-3200GMA 212cc John Deere Branded OHV, 3,200 psi @ 2.7 gpm,

Lightweight Aluminum Frame$ 739.00

PR-3800GH 270cc Gas, Honda GX, 3,800 psi @ 3.2 gpm $1,089.00

PR-3800GM 300cc Gas, OHV, 3,800 psi @ 3.2 gpm $ 859.00

PR-4200GH 389cc Gas, Honda GX, 4,200 psi @ 4 gpm $1,199.00

PR-4200GM 420cc Gas, OHV, 4,200 psi @ 4 gpm $ 919.00

PR-4200GHA 389cc Honda GX, 4,200 psi @ 4.0 gpm, Lightweight Aluminum Frame $1,345.00PR-4200GMA 420cc John Deere Branded OHV, 4,200 psi @ 4.0 gpm,

Lightweight Aluminum Frame$ 989.00

Agricultural/Commercial Hot-Water Series:

AC-1500EH 2.0 HP Electric Motor, 120V/19.0A, 1,500 psi @ 2 gpm $3,125.00

AC-2000EH 4.0 HP Electric Motor, 230V/18.0A, 2,000 psi @ 2.8 gpm $3,375.00

AC-3000EH 8.0 HP Electric Motor, 230V/36.0A, 3,000 psi @ 3.5 gpm $5,575.00

AC-2500GHH 196cc Gas, Honda GX, 2,500 psi @ 2.6 gpm $3,199.00

AC-3500GHH 389cc Gas, Honda GX, 3,500 psi @ 3.3 gpm $4,099.00

HR-2620GMV

PR-3200GH

AC-2000EH

PR-4200GMA


102

HR-20HB-2

John Deere hand-carry toolboxes are tough and rugged, built of the highest-quality materials for long wear life and durability. Each offers a 1-year warranty.

20-in. Hand-Carry Toolboxes

HR-20HB-1


HR-20HB-1 20-in. Toolbox; powder-coat green finish $62.95

HR-20HB-2 20-in. Toolbox; powder-coat green finish with yellow lid $62.95

The John Deere Road Box features a reinforced security drop-front panel to protect tools from weather and theft. It also includes two bottom-skid rails for additional reinforcement and strength. The unique Triangle Toolboxes keep tools in place and secure in your pickup or Gator. Features include gas strut lid supports and weather stripping seal to protect against dust and moisture.

Road Box & Triangle Toolboxes

AC-3015TB-B

AC-3015TB-G

AC-3617TB-G

AC-3615RB-GNUMBER DESCRIPTION LISTAC-3615RB-G 36-in. Green Road Box with 5 Drawers $699.00 AC-3615RB-B 36-in. Black Road Box with 5 Drawers $699.00

AC-2313TB-G 23-in. Triangle Toolbox; green powder-coated, textured finish $395.00

AC-2313TB-B 23-in. Triangle Toolbox; black powder-coated, textured finish $395.00





Tool Chests & Cabinets

AC-5625CB-G & AC-5624H-G

AC-4624CH-G & AC-4624CB-G

Keep your tools secure and organized with the John Deere Tool Chests and Cabinets. Powder-coated steel construction includes heavy-duty ball-bearing drawer slides with a load rating of 100 lbs. per pair. Unique raise-and-release drawer fronts keep drawers closed and secure. Tool Chests feature gas strut lid support, and cabinets include oversized polyurethane casters with a 2,000-lb. load rating.


AC-4624CH-B 46-in. Tool Chest with 8 Drawers; 1,200-lb. load capacity $ 769.00

AC-4624CB-B 46-in. Tool Cabinet with 10 Drawers; 1,400-lb. load capacity $1,099.00

AC-4624CH-G 46-in. Tool Chest with 8 Drawers; 1,200-lb. load capacity $ 769.00

AC-4624CB-G 46-in. Tool Cabinet with 10 Drawers; 1,400-lb. load capacity $1,099.00

AC-5625CB-G 56-in. Tool Cabinet with 10 Drawers; 1,300-lb. load capacity with 1 1/4-in. solid bamboo work surface, 24-in. depth

$1,399.00

AC-5624H-G 56-in. Top Hutch with Shelf $ 515.00

AC-5625CH-G 56-in. Tool Chest with 8 Drawers; 800-lb. load capacity $ 969.00

AC-7224CB-G 72-in. Tool Cabinet with 15 Drawers; 1,600-lb. load capacity with 1 1/4-in. stainless steel work surface, 24-in. depth

$2,499.00

AC-7224H-G 72-in. Top Hutch with Shelf $ 729.00


103

Start out clean. Toss when done. Maybe you think that old shop rag of yours is doing the trick, but look at it—it’s already dirty. Start fresh each time with John Deere hand towels and absorbents.

Shop Towels and Absorbents


Towels

DRC4223 Shop Towels, 200 count, box $12.25

DRC4601 Shop Towels, 56 count, single roll $ 2.99

DRC4221 Shop Towels, 200 count, bucket $17.45

DRC4222 Shop Towels, 200 count, bucket refill $12.25

DRC4602 Shop Towels, 56 count, three pack $ 7.99

Absorbent

ABS2860 Absorbent Pads, 100 count, 15-in. x 19-in. $40.99ABS2861 Absorbent Roll, 28.5-in. x 150-ft., perforated to

15-in. x 19-in. sheets$76.99

ABS2863 Dual-Layer Absorbent Pads, 100 count, 15-in. x 19-in. $69.00

*Offer valid on 200 count bucket refill (DRC4222), free with purchase of 200 count (DRC4221). Limit 2 per customer. Cannot be combined with any other promotion. Valid only at participating dealers in the U.S..

Fully polished or satin-finish nickel-chrome plated to resist rust and corrosion.■ A unique radius-corner design that allows contact with the flats, rather than with

the points—providing additional torque strength and minimizing fastener rounding■ Stronger—providing less chance of slipping—ideal for frozen or rusted fasteners■ Hot-drop forged from chrome-vanadium alloy steel—ensuring maximum strength

and toughness■ Lifetime warranty

Combination Wrenches


TY27698 3-piece Metric Combination Wrench Set, full polish $185.05

TY27696 4-piece SAE Combination Wrench Set, full polish $272.44

TY27695 6-piece SAE Combination Wrench Set, 1-5/16 in.–1-11/16 in., full polish $238.43

TY27697 6-piece Metric Combination Wrench Set, full Polish $223.83

TY19922 10-piece Metric Combination Wrench Set, satin polish $ 55.56

TY19923 11-piece Metric Combo Wrench Set, satin finish $128.36

TY19918 14-piece SAE Combination Wrench Set, satin finish $121.53

TY19976 14-piece SAE Combination Wrench Set, full polish $141.20

TY19977 20-piece Metric Combination Wrench Set, full polish $165.93

TY25249 7-piece SAE Combination Ratcheting Wrench Set, 3/8 in.– 3/4 in. $ 74.56

TY25250 7-piece Metric Combination Ratcheting Wrench Set, 10mm–17mm $ 77.25

$25 rebate on Bench Vises Get a grip. Now go to work. If you can’t grip it, it can be mighty hard to work it. That’s why a John Deere vise belongs on your work bench.

Bench Vise


BV5-J 5-in. Heavy-Duty Bench Vise, 10-year warranty $129.00 $104.00

BV8-J 8-in. Heavy-Duty Bench Vise, 10-year warranty $185.00 $160.00

*

When you’re a John Deere Rewards member, the savings just keep coming. Membership is free. Start with an initial purchase of 2 qualified units in 12 months to unlock Platinum benefits. After that, you’ll receive valuable equipment discounts, Home & Workshop products discounts, and exclusive member promotions. There isn’t a better equipment rewards program in the industry.

Visit JohnDeere.com/Rewards to sign up or find out more.

Meet the card that makes your purchases count. JohnDeere.com/Rewards

104

74610

JohnDeere.com/Rewards

105

When you buy a safe, you’re buying peace of mind. You want to know your valuables are protected. That’s why we partner with America’s #1 safe manufacturer: Liberty Safe.

Our Liberty Safes offer certified fire protection, UL-listed security, flexible interiors, and Liberty’s exclusive military-style locking bar technology. And this year, we have brand new designs that let you show off your John Deere style.

PROTECT THE THINGS THAT MATTER MOST

LP70818 LP70814

Rugged Durability. Home Security Innovation. American-Made Dependability.

LP70817

When you buy a safe, you’re buying peace of mind. You want to know your valuables are protected. That’s why we partner with America’s #1 safe manufacturer: Liberty Safe.

Our Liberty Safes offer certified fire protection, UL-listed security, flexible interiors, and Liberty’s exclusive military-style locking bar technology. And this year, we have brand new designs that let you show off your John Deere style.

PROTECT THE THINGS THAT MATTER MOST

LP70818 LP70814

Rugged Durability. Home Security Innovation. American-Made Dependability.

LP70817

106

ONE LOGO FITS ALLThe John Deere Collection

www.JohnDeere.com

JohnDeere.com/PartsWarranty

Your local John Deere Dealer offers a comprehensive parts inventory, highly trained service technicians,

and the expertise to help you get the most out of your equipment investment. And

now, John Deere O.E.M. agricultural parts installed by an authorized John Deere Dealer carry a 12-month, unlimited-hour warranty

including labor. If you prefer to handle repairs yourself, all Genuine John Deere

ag and turf parts sold carry a 6-month warranty.*

* 12 month/unlimited hour warranty on new agricultural parts installed by an authorized John Deere Dealer. 6 month/unlimited hour warranty for all new John Deere agricultural and turf equipment parts.

See John Deere Service Repair & Parts Warranty for details at JohnDeere.com/PartsWarranty.

GENUINE AND GUARANTEED

John Deere’s green and yellow color scheme, the leaping deer symbol, and JOHN DEERE are trademarks of Deere & Company.

If your address is incorrect, please correct (show any desired change in name and address, including street, route, box number, zip code). Clip this page including dealer imprint(s) above and send to: John Deere, P.O. Box 410418, Kansas City, MO 64141-0418 JDParts.JohnDeere.com

LAMOURE, ND200 6TH ST SW

(701) 883-5271

MILNOR, ND520 MAIN ST

(701) 427-5224

ELLENDALE, ND209 11TH ST N

(701) 349-5336

ASHLEY, ND9589 49TH AVE SE

(701) 288-3471

NAPOLEON, ND904 N BROADWAY(701) 754-2256

BRITTON, SD42168 SD HWY 10(605) 448-5918

GREENIRONEQUIPMENT.COM TEXT GREEN IRON TO 31996

john deere catalog...john deere catalog parts, equipment, supplies, and more harvest 2020 12-month...

Documents