jn6100 lte & wimax indoor cpe datasheet - jaton tec · jn6100 lte & wimax indoor cpe...
TRANSCRIPT
JN6100 LTE & WiMAX Indoor CPE DATASHEET
Shenzhen Jaton Communications 2014
Version V1.00
Date 1/12 2014
2
Notes:
Because of the product version upgrade or other reasons, the content of the document will not be updated on a regular basis. Unless otherwise agreed, this document is used only as a guide, all statements, information and advice in this document do not constitute any express or implied guarantee.
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Version V1.00
INDEX 1 Hardware Specifications ............................................................................................................................. 4
1.1 Basic Description ........................................................................................................................... 4 1.2 ID Design ....................................................................................................................................... 5 1.2.1 Appearance Index ...................................................................................................................... 5 1.2.2 Appearance ................................................................................................................................ 5 1.3 Interface and Button ...................................................................................................................... 5 1.4 LED Indicators ............................................................................................................................... 7 1.5 RF Specifications ........................................................................................................................... 8 1.6 Environment Specifications ........................................................................................................... 9
2 Functional Specification ........................................................................................................................... 10 2.1 Software Specification ................................................................................................................. 10 2.2 Security ........................................................................................................................................ 12 2.3 System/Debug Utility ................................................................................................................... 13 2.4 VOIP Specification(Under development)..................................................................................... 13
3Appendix-Delivers ..................................................................................................................................... 15
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Version V1.00
1 Hardware Specifications
1.1 Basic Description
Spec. Description Comment LTE/Wimax BB ASIC SQN5120 Sequans LTE/Wimax RF ASIC SQN3140 Sequans
Wimax Standard Comply with Wimax 802.16-2005 and Wimax RCT/PCT
All RF specification should comply with Wimax RCT
LTE Standard Comply with 3GPP Release 8 and future release 9
All RF specification should comply with 3GPP Release 8 36.101
Host AR9341 Qualcomm Flash 32MB SPI NOR Flash
DDR Memory 64MB DDR2 SDRAM
Ethernet LAN Port Four RJ-45 port 10/100 auto-sensing,auto-MDX
Four LAN Port
Voice POTS port Two FXS RJ-11 ports Optional Feature USB Port One USB 2.0 Type A
LED Indicators Power/WiFi/Voice/Mode/Signal Strength/LAN Indicator
USIM Support 1.8V/3.0V 2FF USIM Power Switch Power switch, mini rocker switch
Reset/Reboot Button Tact switch
Touch reset functions within 1s completed; long press over 10s to restore the factory settings
WPS Button Tact switch WiFi Button Tact switch Control WiFi turn on or off
Power Supply Input :Universal range 100~240V AC Output:12V/1.5A DC
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Version V1.00
1.2 ID Design
1.2.1 Appearance Index
Index Description Dimension 167.8(H)× 184.2(W)× 44(T)mm
Weight 310g Color White or other customization color
1.2.2 Appearance
Figure 1-1 JN6100 CPE Appearance Figure
1.3 Interface and Button
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Version V1.00
Connectors Description
Mini-PCIe Interface
Comply to mini-PCIe interface standard CEM1.2, the interface is located inside the CPE, which can be accessed in a variety of LTE module or Wimax-LTE dual-mode module or modules from other vendors
ETH RJ45 Four LAN
POTS-RJ11 2 RJ11 interface, phone / fax / POS, providing VoIP functions under conditions of software support
USB Type A Host USB 2.0 Host USIM Slot Support 1.8V/3.0V USIM
Power The Power port is where you connect the enclosed power adapter
Reset/Reboot Touch reset functions within 1s completed; long press over 10s to restore the factory settings
WPS Touch the WPS Button,WiFi successfully set WiFi Turn on or off WiFi Function
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Page7 o f 15
7
1.4 LED Indicators
LED Name Description Color LED
Behavior Status Indicator
PWR Power Indicator Blue OFF No Power Supply
Steady On Power On
WLAN WLAN Indicator Blue
OFF WLAN function disable
Blanking Data transmission through
WLAN Steady On WLAN function enable
WPS WiFi encryption with one button
Blue OFF WPS disable
Blanking WiFi terminal being accessing Steady On WPS Enable
Tel1~Tel2
Voice telephone interface indicator
Blue
Steady On Be connected with voice server
Blanking(2 times/sec.)
Connection has been established and is in a state with a hook or ringing voice
server Blanking(1/s
ec.) registering with the voice server
OFF Not establish a connection with
the voice server
MODE Mode Indication Blue
Steady On In LTE/Wimax network
Blanking LTE/Wimax scan, connect, complete LTE connectivity
OFF No access in LTE/Wimax
network
Signal strength indication
Blue
OFF No access in wireless network
One by one signal bar
display
Displays the current wireless network signal strength, the stronger the signal, the more
bars on.
LAN1~LAN4
ETH Indication Chartreuse
Steady On Ethernet connection is normal
Blanking Ethernet interface data being
transmitted
OFF Ethernet connection is not
established In addition, two special status indicator (Firmware upgrade and reset process) is described as
follows:
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Page8 o f 15
8
Status Indicator Status Description Firmware upgrade WPS + WLAN two lights flash simultaneously
Reset process Except 5 signal strength indicator, the other indicator are all on
1.5 RF Specifications
No. Feature Capability
Comments Min Typ Max Unit
1 Wimax Supported
Bands
3400MHz 3800MHz
2300MHz 2700MHz
2 TD-LTE Support
Bands
Band42/43
Band40/41
3 Wimax Channel
Band Width 5/7/10 MHz
4 TD-LTE Channel
Band Width 5/10/15/20 MHz
5 Output
Power@25℃ 25 dBm
6 Transmit Power
Dynamic Range @ LTE
63 dB
7 Wimax Standard Comply with Wimax 802.16-2005 and
Wimax RCT/PCT
All RF specification should comply with
Wimax RCT
8 LTE Standard Comply with 3GPP Release 8 and
future release 9
All RF specification should comply with
3GPP Release 8 36.101
9 Antenna Support
Frequency
3400 3800 MHz
2300 2700 MHz
10 LTE/Wimax Antenna
Gain 4 dBi
11 Wi-Fi Frequency Ch1~11
Channel 1 -2412MHz Channel 2 -2417MHz Channel 3 -2422MHz Channel 4 -2427MHz
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Page9 o f 15
9
Channel 5 -2432MHz Channel 6 -2437MHz Channel 7 -2442MHz Channel 8 -2447MHz Channel 9 -2452MHz
Channel 10 -2457MHz Channel 11 -2462MHz
12 Wi-Fi Channel BW 20 MHz
13 2.4G Wi-Fi Antenna Gain(2.4G Wi-Fi)
2.5
1.6 Environment Specifications
No. Feature Capability
Comments Min Type Max units
1 Operating
Temperature -10 45 ℃ <50℃ without damage
2 Storage
Temperature -20 60 ℃
3 Operating humidity 0 95 %
4 Storage humidity 0 95 %
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Page 10 of 15
2 Functional Specification
2.1 Software Specification
Spec Description
Functions
Support 802.11 b/g/n Support FAT AP Built in mini-PCIe interface supports a variety of wireless modules Supports LTE TDD and FDD data card that supports various combinations of bands and a variety of bands Supports Wimax of 3.4GHz~3.8GHz POTS interface supports fax and POS (optional) WAN port packet forwarding capability:> 80Mbps Users can manually modify the USIM card PIN code; When the PIN verification, after the first manual check, follow-up support automatic verification; After the PIN code input reaches the maximum number of attempts, USIM card will be blocked, and support the PUK code to unlock function; Support modify the APN manually by WEB UI WEB UI support OS: Windows XP above SP3, Window 7, Vista, Linux。
USB2.0 1. Direct access the module 2. Upgrade module firmware from USB2.0 port 3. IOT test should use this port
WIFI Features
1. Users can switch WLAN function through two ways, one is touch the WLAN button, the second is Web UI. 2. Support configuration WLAN functions through Web UI, include: SSID, SSID broadcasting turn on/off, AP Isolate function, Channel, rate and mode 3. Support encryption: Un-encrypted, WEP-OPEN, WEP-SHARED, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), WPA2-PSK (AES) 4. Support WPS: Support PBC mode 5. WiFi protocol support: IEEE 802.11 b/g/n (2.401 – 2.483 GHz)
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Page 11 of 15
Spec Description
Device Management
Device management:Support TR069 1. Supports upload / download the ACS specified file; Support download CPE configuration file; 2. Support queries following parameters: PCI / RSRP / RSRQ / SINR / Transmit power / DL Packet Error Rate (PER) / MCS Data rate in downlink and uplink / MIMO mode in progress 3. Support configure the following parameters: Wan Configuration: Operation Mode, WAN Protocol, Get IP Method, WAN IP Address, WAN IP Subnet Mask, MTU; DHCP Server Configuration: DHCP Mode, Start IP, End IP, Lease Time, Relay IP; DMZ configuration: DMZ Host; VOIP-related parameters; 4. Support remote upgrade: Support batch or for individual CPE remote version upgrade and rollback operations; 5. Support CPE version update 6. Supports debugging operations: reboot, restore factory settings, remote PING bag, burn and change ACL address 7. Support cycle monitor: According to the server instructions, periodically reporting corresponding parameters: including device performance (Data rate in downlink and uplink, DL Packet Error Rate (PER), MCS, MIMO mode, etc.) and RF parameters (PCI, RSRP, RSRQ , SINR, Transmit power, etc.)
Router Functions
1. Support Router mode and Bridge mode; 2. Users can automatically obtain IP parameters through static IP or dynamic mode (DNS) 3. Users can automatically obtain IP address through DHCP; 4. Supports user devices via a switch connected to the Internet by CPE LAN ports, maximum number of connections no less than 32; 5. Support via a router device connected to the Internet by CPE LAN ports.
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Page 12 of 15
Spec Description
Web UI Basic Function
1. Query and display functions: A) Connection information (connection status, wireless signal strength,
network traffic statistics, connection time); B) Basic information about the device firmware;
C) Board / Device SN; D) SIM card information display such as IMEI, business IP;
E) CPE connection status and parameter display; 2. Parameter configuration features:
A) The default login address 192.168.1.1 username / password: admin / admin;
B) Support modify password after login; C) Support data and VOIP traffic display, support clear the traffic
statistics; D) Support local upgrade by Web UI; E) Support restart and restore the factory settings; support import and
export configuration files; F) Support setting WiFi, VOIP, TR069, network access parameters,
firewall, system time, Router settings, fax, etc.; G) Supports setup wizard;
2.2 Security
No. Feature Status Comments
1 User Name/Password configuration Support
2
L2/L3 Firewall -Basic firewall
- Port Forwarding -uPnP -DMZ
-Remote WAN Ping -Remote Web Access Control
Support
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Page 13 of 15
2.3 System/Debug Utility No. Feature Status Comments
1 Software reset button Ready Reset to factory default
2 Configuration Wizard Ready
3 Time Zone Configuration Ready 80+ Countries/Cities selection
4 LED for Wimax/LTE Link
Diagnostic TBD Need further definition if needed
5 System log Ready Output system information to specified
network device
6 Dual Image-Firmware Upgrade fail protection
Ready Switchable
7 Firmware Verification Ready Use digital signature to verify the
installed firmware.
8 Multi-language Under
developing Customized
9 Diagnostic & Monitoring Ready
2.4 VOIP Specification(Under development)
N. Feature Status Comments
1
Protocol SIP v2 (RFC 3261)
(SIP:Session Initiation Protocol)
(RFC:Request For Comments )
SDP (RFC2327) (SDP :Session Description Protocol)
RTP/RTCP (RFC1889/RFC 1890) (RTP:Realtime Transport Protocol)
(RTCP:Realtime Transport Control Protocol)
Support 1
2
Codecs G.711
G.729 a/b Support 1
3 Echo Cancellation Support
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Page 14 of 15
G.168
4 Caller ID Support
Caller ID is a feature that allows you to know who is
calling you before answering the phone.
5 Call Hold Support
6 Outgoing Caller ID block Support Hide caller name and number
7 Anonymous Incoming Call Rejection Support It prevents anonymous calls
from getting through
8 Call Waiting Indication (tone) Support
9 Call Transfer – Blind Support
10 Call Transfer – Consultive Support
11 Call Forwarding – Unconditional (Universal) Support
12 Call Forwarding on No Answer Support
13 Call Forwarding on Busy Support
14 Call Waiting Support
15 Cancel Call Waiting Support
16 Cancel Call Waiting Support
17 Cancel Call Waiting Support
18 Cancel Call Waiting Support
19 Cancel Call Waiting Support
20 Call Waiting Recall Support
When user have received call waiting and then hang up, the phone will play ringing tone to indicate that there is another
call on line.
21 Three-way Conference Support
Can speak to two other persons at the same time,
making a three-person conversation.
22 Dial Plan Support Support Defines the pattern that an end user can dial to create a valid
phone number. It is ordered set
JN6100 LTW &Wimax Indoor CPE DATASHEET
Version V1.00 Page 15 of 15
of regular expressions.
23 Do Not Disturb Support
24 Redial Support
25 Repeat Dialing on Busy Support
26 Automatic Call Return Support
Allows you to call back the number whose call you missed
by simply pressing some buttons.
27 G.711 fax send an receive Support
28 T.38 fax send an receive Support
29 MWI and VMWI
Support
When the user has new messages waiting for him, an audible or visible indication is
operated on the phone.
3Appendix-Delivers
Article Number Content Comments
- 1*Assembled product - 1*Ethernet cable, 1M - 1*12V/1A or 1A AC
adapter (Wall Mount) - 1*Manual
Detail Delivers need to be defined by customer agreement