jmv’s exothermic weld offers a permanent and reliable connection
TRANSCRIPT
EXOTHERMIC JAM WELD
Welds of strength and integrity ...
All About Electrical Safety
STANDARD ITS MEETS OR EXCEEDS:
TOOL KIT :
JMV LPS Limited is an ISO certified leading
manufacturer, supplier and exporter of electrical
safety products compose of Maintenance Free
Chemical Earthing System, Exothermic Weld, Lighting
Protection System, Surge Protection Devices and
Conduit Pipes.
JMV JAM Weld provides the finest in permanent
bonding in welding in which no external heat or
power is required. It is the most preferred and most
accepted method all over the world for making
electrical connections of Copper to Copper and
Copper to Steel.
JAM Weld ensures best performance for all connections which are mechanically superior it’s the
most suitable option for all high current connections. JMV JAM weld connections are superior to
other type of connections which are subject to variations, ageing loosening and corrosion.
JMV EXOTHERMIC WELDING KIT
Molds
A graphite mold is used for exothermic welding connections.
The mold controls the direction and speed of the molten
weld metal flow and the formation of the weld.
Handle Clamps
Handles are required to hold the mold
ABOUT THE PRODUCT
Exothermic weld powder is a mixture of copper oxide and aluminum,
packaged by size in a plastic cartridge.
Cable Brush is used for cleaning heavily oxidized conductors
and surfaces prior to the welding connection.
Cable Cleaning Brush
Brush cleans any conductor and is especially useful for coarse or
very dirty conductors.
Disks are used to sea l the tap ho le .
Step 1
Clean the conductors to be welded. Place the cables into
position in the mold.
Step 2
Close the handle clamp to lock the mold. Place the disk
into position in the mold.
Flint Ignitors are used to ignite the starting material.
Slag Removal Spade useful for removing the slag from the mold
after the welding connection is completed.
Mold brush is useful for removing the slag from the mold after
the welding connection is completed.
PROCESS
DIFFERENT TYPES OF JOINTS
Please contact us atMobile No : +91 9910398538Email : [email protected]
For ordering the JAM Weld
Exothermic weld kit kindly provide detailed specification of the conductors that needs to be joint.
–
BENEFITS
HOW TO ORDER
Step 3
Place the weld metal into the mold. Sprinkle the starting
powder over the weld metal and on the lip of the mold.
Step 4
Close the cover and ignite using flint ignitor. Open the
mold after the metal solidifies. Remove the slag from
the mold before making the next connection.
It is efficient and superior to all existing surface –to-surface mechanical
retention connectors.
It is universally preferred method of making electrical Connections of Copper to Copper
or Copper to Steel. The current carrying capacity of exothermically jointed connection
is higher than the current carrying capacity of conductor. The joints resistance,
impedance and ampacity directly relate to the safety and functionality of the system.
JAMWELD meets these requirements and deliver assurance.