jll presentation cpa and bohler arch and laser scanning

18
Civil Engineering · Architectural Engineering · Permitting · Landscape Architecture Land Surveying · Environmental and Geotechnical Engineering · Traffic Engineering Philadelphia, PA 267.402.3400 · Center Valley, PA 610.709.9971 · Chalfont, PA 215.996.9100 Warren, NJ · Southborough, MA · Albany, NY · Ronkonkoma, NY · Towson, MD · Bowie, MD · Sterling, VA Warrenton, VA · Fort Lauderdale, FL · Tampa, FL Bohler Engineering & Affiliates

Upload: richbutkus

Post on 21-May-2015

673 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Civil Engineering · Architectural Engineering · Permitting · Landscape Architecture Land Surveying · Environmental and Geotechnical Engineering · Traffic Engineering

Philadelphia, PA 267.402.3400 · Center Valley, PA 610.709.9971 · Chalfont, PA 215.996.9100Warren, NJ · Southborough, MA · Albany, NY · Ronkonkoma, NY · Towson, MD · Bowie, MD · Sterling, VA

Warrenton, VA · Fort Lauderdale, FL · Tampa, FL

Bohler Engineering & Affiliates

Page 2: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Introduction• Frank Coulter, PE, Architectural Project Manager (BEI)

• Buck Collins, Director of Client Services (BEI)

• Richard A. Butkus, Jr., General Manager (CPA)

Page 3: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Bohler Services

ARCHITECTURAL ENGINEERING

• Preliminary Client Consultation • Feasibility Studies • Site Investigation Reports • Building Code Research and Analysis • Existing/As-built Condition Surveys and Report • Space Planning • Concept Development • Color Renderings • Full Building Design/Engineering: Architectural, Structural,

Mechanical, Electrical, Plumbing • Construction Document Development • Materials Specification • Permit Expediting • Contractor Bid Coordination • Project Management • Shop Drawing/Submittal Review • Construction Administration

Page 4: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Building Alteration/Renovation ServicesMacy’s/Starbuck’s, John Wannamaker Building, Center City Philadelphia, PA: This Starbucks project required a

unique approach. The photos shown are of the world famous John Wannamaker building in Center City. Macy’s wanted a “destination” type café for their customers and Starbuck’s was the perfect partner for this venture; however Starbuck’s needed to maintain an independent exterior presence as well. The result was subtle conversion of one of the display windows into an exterior entrance. Due to the historic nature of the building, Bohler assisted our Clients in achieving both their goals while preserving and maintaining the historic quality of the building.

Before After

Page 5: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Building Alteration/Renovation Services

Potbelly Sandwich Works, 1200 Walnut St., Philadelphia, PA: Bohler provided design/permitting assistance for the exterior restoration and tenant installation of a new sandwich deli. This project involved design and permitting of a new exterior ADA ramp/stair to overcome a +/- 2’-0” grade differential.

Before After

Page 6: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Control Point Services

PROFESSIONAL LAND SURVEYING• Laser Scanning• True View Virtual Environments• 3D Modeling• 3D Renderings • Aerial Ground Control & Photogrammetry• Architectural Surveys• As-Built & Final Surveys• Interior and Exterior Architectural Building As-Builts and Space

Validation• Boundary, Topographic & Utility Surveys• ALTA/ACSM Land Title Surveys• Anchor Bolt/Steel Framing Plans• Façade Surveys• Geodetic Control Surveys• Hydrographic Surveys• Property and Easement Descriptions• Subdivisions & Lot Consolidation Plats

Page 7: Jll Presentation Cpa And Bohler Arch And Laser Scanning

BIM Modeling

White Plains HospitalCath Lab Interior SurveyApproximately 5000 s.f.

Field:• Leica C10 HDS Laser

Scanner• 16 hours of Field time to

Produce the point cloud

Office:• 7 hours of Tech time to

register point cloud and create truview

• 34 Hours in Cyclone for 3D Modeling

Page 8: Jll Presentation Cpa And Bohler Arch And Laser Scanning

MEP EXAMPLE

White Plains HospitalMechanical/Chiller Room

Field:• Leica C10 HDS Laser

Scanner• 3 hours in room

Office:• 10 hours to Model MEP

elements in Cyclone

Page 9: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Institutional Example

130’ Tall Historic Building on Campus of Georgia Tech

Field:• 4 Set-ups• 4 Hours to finish Data

Collection

Office:• 6 Hours in CloudWorx for

plan creation• 0.5 Hours to clean-up and

Plot

Page 10: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Infrastructure Examples

Bridge Viaduct Interchange – Steel Models and Clearances

Field:• Leica C10 HDS Scanner• 3 hours in field – Closed

Traverse on Local Coordinate System

• 4 Hours to finish Data Collection

Office:• 12 Hours in Cyclone for

Modeling• No Plan Delivered – Only

Screenshots• 0.5 Hours for Screenshots

and Report

Page 11: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Preservation Example

Historic Building Face

Field:• Leica C10 HDS Scanner• 3 hours in field • 2 Hours to finish Data Collection

Office:• 12 Hours in Cyclone for 3D Model

Page 12: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Infrastructure Examples

500’ of Divided Highway with Elevation View of Historic Hotel

Field:• Leica C10 HDS Scanner• 4 hours in field• 4 Hours to finish Data Collection• Registered to State Plane Coordinate System

Office:• 2 Hour in Cyclone for TIN Creation• 5 Hours in CloudWorx for Topographic Plan

Creation• 0.5 Hours to Clean-up and Plot Topographic

Plan• 6 Hours in CloudWorx for Elevation View Plan

Creation

Page 13: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Laser Scan Surveying & Optional Deliverables

Control Point Associates / Bohler Engineering will utilize a Leica C10 HDS (High Definition Scanner) to perform multiple scans for the interior or exterior project areas. The resulting scan will produce a point cloud comprised of millions of data points with an accuracy of 1/8th of an inch or greater.

 This point cloud may be utilized to produce a wide range of deliverables. These can range in

complexity and accuracy from a simple 2 dimensional floor plan to a complex 3 dimensional intelligent BIM (Building Information Model) deliverable, depending on the client's needs.

Page 14: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Level and Complexity of Deliverables

WHO is going to be using the scan data? Architects and Construction Managers that require exact measurements and deliverables in Revit format or marketing and other less technical users that only need the data presented in its simplest form or in a the more common AutoCad format.

 WHAT is the purpose of the laser scan? New Construction, Interior Modifications, Space Planning or MEP projects?

 Marketing Materials for Prospective Tenants/Buyers or Building Façade Scans for Historic Preservation… WHERE is the scanning technology used? The scans are used anywhere inside, outside or near your space of

building. An individual office, utility room, basement, lobby, plenum, roof or parking lot all go thru changes and alterations that require permanent plans at the greatest level of accuracy.

 WHEN will the scan information be used? This technology has been available for 10+ years, but only recently has

the industry begun to treat it as the technology of choice for surveying. Most prominent Architects, Construction Managers, Contractors and Engineers have begun utilizing and often requiring laser scanning to dramatically speed delivery, reduce errors in measurements and cost overruns. The data will be used for all future building operations, potentially as long as the building remains standing.

 HOW is the scan to be used? Basic modeling or for technical drawings for precise Cost Estimating and Project

Permitting

Page 15: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Levels of Development (LOD)

Page 16: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Levels of Development (LOD)

First Niagara Bank: First Niagara Bank expanded into the Philadelphia market late in 2009, when they purchased Harleysville National Bank. Many of the branch locations did not have any building plans or site survey plans associated. Bohler was able to rapidly initiate and complete base building measurements and develop building area plans and photo location plans so that the Client could better understand and analyze each branch included in the purchase.

Page 17: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Exterior Site Services

Segmental Retaining Wall Concrete Retaining Wall

Bohler Engineering’s experience in Architectural Engineering is not limited to building design. Often times land development teams require retaining wall design to be included within the site design package. Bohler provides these design services “in-house” for our Clients, thus saving both time and money during the design process.

Page 18: Jll Presentation Cpa And Bohler Arch And Laser Scanning

Office LocationsPhiladelphia, Pennsylvania

1515 Market Street, Suite 920

Philadelphia, PA 19102

(P) 267.402.3400 (F) 267.402.3401

Center Valley, Pennsylvania

Stabler Corporate Center

3701 Corporate Parkway, Suite 200

Center Valley, PA 18034

(P) 610.709.9971 (F) 610.709.9976

Chalfont, Pennsylvania

New Britain Corporate Center

1600 Manor Drive, Suite 200

Chalfont, PA 18914

(P) 215.996.9100 (F) 215.996.9102

Albany, New York

Bowie, Maryland

Fort Lauderdale, Florida

Ronkonkoma, New York

Sterling, Virginia

Southborough, Massachusetts

Tampa, Florida

Towson, Maryland

Warren, New Jersey (Headquarters Office)

Warrenton, Virginia