jis & ks - superlok chinasuperlok-china.com/pdf/4. tube fittings.pdfbite type tube fitting for...
TRANSCRIPT
Bite Type Tube Fitting for JIS & KS 2
SUPERLOK Bite Type Fitting is manufactured to JIS B2351& KSB1535 under strict ISO 9001 procedure
Standard of SUPERLOK Bite Type Fitting
Bite type fitting consists of three parts : BODY, SLEEVEand NUT, and is designed to work over medium and heavywall tubing. See Fig.1
The sleeve is driven forward on the tube by the nut. As the sleeve
moves forward it meets the seal seat angle of the body which causes
the sleeve to cam inward into the tube. The sleeve then bites into the
tube causing a small ridge of tube material to be pushed up in front
of the biting edge of the sleeve. See Fig.2
The make up of the fitting is critical in that the tube must bebottomed against the tube stop in the body or presetting tool duringmake up. If it is not bottomed the tube will move forward with thesleeve and a bite will not be achieved.Make sure the tube is bottomed. A check is possible to see if thetube was bottomed during make up. To make this check look at theend of the tube, and notice if a circular appearing ring has beenimpressed into the tube end face. This impression will be caused bythe tube stop which has a slight reverse angle rather than a flat face.
Pressure Range & Working Temperature
Material Specifications
Tubing Selection
*Carbon Steel :
Seamless, welded, fully annealed and redrawn tube suitable forbending with maximum hardness Rockwell B72.
*Stainless Steel :
Seamless, welded, fully annealed and redrawn tube suitable forbending with maximum hardness Rockwell B90
*Copper :
For seamless coils, soft or light annealed, maximumhardness Rockwell F55.For straight lengths, light drawn and general purpose,maximum hardness 60 on Rockwell 30T scale.
Parts Carbon Steel
Forged Body
Bar Stock Body
Cold Formed Nut
Bar Stock Nut
Sleeve
JIS G4051
S20C-S48C
JIS G4051
S20C-S48C
JIS G4051
S10C-S20C
JIS G4051
S20C-S48C
JIS G4051
S10C
SUS316,SUS304
SUS316,SUS304
SUS316,SUS304
SUS316,SUS304
JIS H3250
C3771
JIS H3250
C3604
JIS H3250
C3604
JIS H3250
C3604
Stainless Steel Brass
Material
Temperature-40 to 120
(DIN 3859)
-60 to 400
(DIN 17440)-60 to 175
Carbon Steel
Pressure
(Kgf/cm2)
O.D
(mm)
4-15
16-22
25-28
30-38
40-50
500
400
350
250
210
250
210
170
150
120
Stainless Steel Brass
Fig.1
Fig.2
Sleeve Tube
Bite Type Tube Fitting for JIS & KS 3
Bite Type Tube Fitting for JIS & KS
Assembly Instructions
Step 1. Cutting the tube :
Cut tube squarely and lightly de-burr the end
internally and externally.
Step 2. Sleeve placement :
Set a nut and sleeve on the tube. Make sure the
sleeve and the nut are facing the fitting.
Step 3. Lubrication :
Lightly lubricate threads on tool or body as well as
the tail and lead end of the sleeve with an extreme
friction lubricant.
Step 4. Pre-setting :
Insert tube end into tool or fitting until it bottoms
against the shoulder(to hold tube motionless
during pre-setting operation) and screw nut down
finger tight.
Step 5. Final setting :
Wrench nut down 1-1/2 turns to pre-set the sleeve
reliable make up of all flareless tube fittings is
dependent upon the sleeve traveling a prescribed
distance into the tapered fitting throat in order to
bite into the tube and effect a positive grip and seal.
Reassembly Instructions
Fitting can be used many times. To ensure this, parts must
be clean and free of defects.
Step 1. Insert the tube into fitting body until sleeve seats
firmly in the fitting and hand-tighten the nut.
Step 2. Tighten the nut with a wrench by holding the fitting
body with a backup wrench until a sharp rise in
torque is felt.
Further tighten the nut 1/4 to 1/2 turn.
Pre-Set Inspection
All SUPERLOK fitting presets must be disassembled
and inspected for proper sleeve pre-set before final
installation for service. The following detailed inspection
procedures must be followed regardless of the method used
to pre-set the sleeve to the tube. (See Fig.3)
1. A ridge of metal (A) has been raised above the tube
surface to a height of at least 50% of the thickness of the
sleeve leading edge, completely around the tube.
2. While the leading edge of the sleeve may be coined flat
(B) there is a slight bow to the balance of the pilot
section (C).
3. The tail or back end of the sleeve is snug against the
tube (D).
4. There is a slight indentation around the end of the tube
(E) that indicates the tube was bottomed in the tool or
fitting during pre-setting (if evidence of this complete
contact is not visible the sleeve may not be properly
pre-set).
5. Avoid rotating the sleeve. Steel sleeve should not be
capable of moving back and forth along the tube beyond
the bite area (a stainless steel sleeve will move more
than steel because of it's spring back characteristics).
Trouble Shooting Guide
Problems with bite type fittings are most of ten traced to
faulty Pre-Set/Assembly procedure.
1. Tube not bottomed
Remedy:Check for the indentation on the tubeend or compare the length from the endof the tube to the front end of the sleeveof a known good assembly to that of theassembly in question. This assemblyshould be scrapped.
Bite Type Tube Fitting for JIS & KS 4
: SUPERLOK Bite Type Fitting: Name of Fitting: Tube and Pipe Designations
Material Indication System
C = Carbon SteelSS = 316 Stainless Steel304 = 304 Stainless SteelB = Brass
Out dia.
Designation
Nominal dia.
Out dia.
Designation
4
04
1/8
10.5
6A
6
06
1/4
13.8
8A
8
08
3/8
17.3
10A
12......... 38
12......... 38
10
10
1/2
21.7
15A
3/4
27.2
20A
1
34.0
25A
40
40
1 1/4
42.7
32A
50
50
1 1/2
48.6
40A
MetricTube
SCH,
PIPE
Ordering Information
B CM - 08 - 02 R
Example 1
BCM - 08 - 02 R - B
Example
Brass
B US - 12
Example 2
: Pipe Thread Designations
Thread
Designation
2
16
1 1/2
12
1 1/4
10
1
08
3/4
06
1/2
04
3/8
03
1/4
02
1/8
01
: Thread Symbols
Type
Taper Threads
Parallel Threads
Specification
JIS B 0203(PT), ISO 7/1
ANSI B 1.20.1(NPT)
JIS B 0202(PF), ISO 228/1
Symbol
R
N
G
Remedy:
Inspect for turned up ridge of material.
A failure to achieve this ridge can be
traced either to the nut not being
tightened enough or the tube not being
bottomed against the stop which
allowed the tube to travel forward with
the sleeve. In some instances this
assembly may be re-worked.
2. Shallow bite
Remedy:
Too much pressure or more than 1-3/4
turns from finger tight were used to
pre-set sleeve, or the nut was severely
over-tightened in final assembly. This
assembly should be scrapped.
3. Over-set sleeve
Remedy:
The sleeve may become cocked on the
tube when the tube end is not properly
lined up with the body. Generally, this
condition is caused by faulty tube
bending. All bent tube assemblies
should drop into the fitting body prior to
make up. This assembly should be
scrapped.
4. Sleeve cocked on tube
Remedy:
If all of the prior checks have been
made and the sleeve still shows no sign
of biting the tube, it may be that the tube
is too hard. This assembly should be
scrapped.
5. No bite
Bite Type Tube Fitting for JIS & KS 5
Bite Type Tube Fitting for JIS & KS
BUE Union Elbow
BUS Straight Union
BMRT Male Run Tee
BCFFemaleConnector
BBCFBulkhead FemaleConnector
BFGC Gauge Connector
BFEFemale Elbow
BFBTFemale Branch Tee
BFRT Female Run Tee
BCCap
BPLPlug
BNTNut
BCRSleeve
BHMUHose Male Union
BHFUHose Female Union
BHBMUHose BulkheadMale Union
BHBFU Hose BulkheadFemale Union
BHME HoseMale Elbow
BHFE Hose Female Elbow
BHBME Hose BulkheadMale Elbow
BHBFE Hose BulkheadFemale Elbow
BWCWelding Connector
BWBUWelding Bulkhead Union
BAP-RAdapter
BAP-GAdapter
BRDReducer
BAEAdjustable Elbow
BABTAdjustable Branch Tee
BARTAdjustable Run Tee
BAPVAir Purge Valve(Tube End)
BAPV-RAir Purge Valve(Thread End)
6 16
17
17
18
18
19
19
20
20
21
21
22
22
23
23
24
24
25
25
26
26
27
27
28
28
29
29
30
30
6
BUT Union Tee
BUC Union Cross
BBHUBulkhead Union
BBUEBulkhead UnionElbow
BCM-RMale Connector
BCM-GMale Connector(For Copper Gasket)
BCM-GOMale Connector(For O-Ring)
BLCMLong Male Connector
BMEMale Elbow
BLMELongMale Elbow
BPMEO-Ring SealMale Elbow
BBEBanjo Elbow
BMBTMale Branch Tee
7
7
8
8
9
10
11
12
13
14
14
15
15
Bite Type Tube Fitting for JIS & KS 6
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
35515254546161616363667172737985949410354606163717998103
203031313136363638383943434444465555603136363843445760
121417171924272730323641414646505555651722273241466065
121417192227303236364146465055606060751924323646556575
677777.57.588910101011111212121277.58910111212
2.5468101213141718202225262832323440811141822283440
BUS-04BUS-06BUS-08BUS-10BUS-12BUS-15BUS-16BUS-18BUS-20BUS-22BUS-25BUS-28BUS-30BUS-32BUS-35BUS-38BUS-40BUS-42BUS-50BUS-6ABUS-8ABUS-10ABUS-15ABUS-20ABUS-25ABUS-32ABUS-40A
46810121516182022252830323538404250
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
Part NumberTube O.D.
D
Dimension
d A H h I L
BUSStraight Union
22.530.533.534.535.541.544.544.545.546.549.55555.559.563.569.574.574.583.534.54044.546.55563.577.583.5
152023232429323233343641414546505555622328323441465762
121417171924272730323641414646505555651722273241466065
121417192227303236364146465055606060751924323646556575
677777.57.588910101011111212121277.58910111212
2.5468101213141718202225262832323440811141822283440
BUE-04BUE-06BUE-08BUE-10BUE-12BUE-15BUE-16BUE-18BUE-20BUE-22BUE-25BUE-28BUE-30BUE-32BUE-35BUE-38BUE-40BUE-42BUE-50BUE-6ABUE-8ABUE-10ABUE-15ABUE-20ABUE-25ABUE-32ABUE-40A
46810121516182022252830323538404250
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.0 1 1/4 42.71 1/2 48.6
Part NumberTube O.D.
D
Dimension
d A H h I L
BUEUnion Elbow
Bite Type Tube Fitting for JIS & KS 7
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
22.530.533.534.535.541.544.544.545.546.549.55555.559.563.569.574.574.583.534.54044.546.55563.577.583.5
152023232429323233343641414546505555622328323441465762
121417171924272730323641414646505555651722273241466065
121417192227303236364146465055606060751924323646556575
677777.57.588910101011111212121277.58910111212
2.5468101213141718202225262832323440811141822283440
BUT-04BUT-06BUT-08BUT-10BUT-12BUT-15BUT-16BUT-18BUT-20BUT-22BUT-25BUT-28BUT-30BUT-32BUT-35BUT-38BUT-40BUT-42BUT-50BUT-6ABUT-8ABUT-10ABUT-15ABUT-20ABUT-25ABUT-32ABUT-40A
46810121516182022252830323538404250
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
Part NumberTube O.D.
D
Dimension
d A H h I L
BUTUnion Tee
4681012131417202526
77777.57.588101011
1417192227303236414650
1717191927273030364646
2323242432323333364545
33.533.535.535.544.544.545.545.549.559.559.5
BUC-06BUC-08BUC-10BUC-12BUC-15BUC-16BUC-18BUC-20BUC-25BUC-30BUC-32
68101215161820253032
Part NumberTube O.D.
D
Dimension
d A H h I L
BUC
Union Cross
Bite Type Tube Fitting for JIS & KS 8
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
10.512.514.516.518.522.524.526.528.530.535.538.540.542.545.548.552.564.516.520.526.530.538.545.556.564.5
1313131313151515151515151515151515151315151515151515
32.542.542.543.543.549.549.551.551.551.552.55555.557.560.564.569.571.543.54951.551.55560.570.571.5
21.529.529.531.531.534.536.536.536.537.538.54242.544.547.550.556.564.531.53436.537.54247.560.564.5
2532323232373739393939414143434550503237393941435050
1419192020222424242525282830303137432022242528304043
1417192224273032323641464650505560702227323646506570
1214171922273032363641464650556060751924323646556575
677777.57.5889101010111112121277.58910111212
2.54681012131417182022252628323240811141822283440
BBHU-04BBHU-06BBHU-08BBHU-10BBHU-12BBHU-15BBHU-16BBHU-18BBHU-20BBHU-22BBHU-25BBHU-28BBHU-30BBHU-32BBHU-35BBHU-38BBHU-40BBHU-50BBHU-6ABBHU-8ABBHU-10ABBHU-15ABBHU-20ABBHU-25ABBHU-32ABBHU-40A
468101215161820222528303235384050
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
Part NumberTube O.D.
D
Dimension
NSL1LI1IhHAd
BBHUBulkhead Union
BBUE-06BBUE-08BBUE-10BBUE-12BBUE-15BBUE-16BBUE-18BBUE-20BBUE-22BBUE-25BBUE-28BBUE-30
12.514.516.518.522.524.526.528.530.535.538.540.5
131313131515151515151515
33.534.537.538.543.545.545.545.548.552.55560.5
42.542.543.543.549.549.551.551.551.552.55555.5
55.556.559.560.569.571.575.577.577.581.58488.5
232426273133333336394146
454648495759636565687074
77777.57.5889101010
141719222730323636414646
171922242730323636414646
171922242730323236414146
468101213141718202225
6810121516182022252830
PartNumber
Tube O.D.D
Dimension
NSL2L1LI1IAHh1hd
BBUEBulkhead Union Elbow
Bite Type Tube Fitting for JIS & KS 9
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
PT 1/8PT 1/8PT 1/4PT 1/8PT 1/4PT 1/4PT 3/8PT 1/2PT 1/4PT 3/8PT 1/2PT 3/8PT 1/2PT 3/8PT 1/2PT 3/8PT 1/2PT 1/2PT 3/4PT 1/2PT 3/4PT 3/4PT 1PT 3/4PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2PT 1 1/2PT 2PT 1/8PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 3/4PT 3/4PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2PT 2
25.534.537.535.537.538.53942.538.53942.54345.54345.54345.547.54847.548505252.554.55557576064696976.536.538.54242.54345.547.54852.554.5596072727676.5
22283329333334393334393741374137414345434546494851515555555762627129333637374143454851525564646771
12141717171719221919242424272727273030323236364141414646465055556517172222272732324141464660606565
12141417171919192222222727303032323636363641414646464650556060607519192424323236364646555565657575
3.973.976.013.976.016.016.358.166.016.358.166.358.166.358.166.358.168.169.538.169.539.5310.399.5310.3910.3912.7012.7012.7012.7012.7012.7015.883.976.016.016.356.358.168.169.539.5310.3910.3912.7012.7012.7012.7015.88
677777777777.57.57.57.5888899101010101010111112121212777.57.588991010111112121212
2.54446788791091291291212161216162016222225262832323440477991212161622222831343640
BCM-04-01RBCM-06-01RBCM-06-02RBCM-08-01RBCM-08-02RBCM-10-02RBCM-10-03RBCM-10-04RBCM-12-02RBCM-12-03RBCM-12-04RBCM-15-03RBCM-15-04RBCM-16-03RBCM-16-04RBCM-18-03RBCM-18-04RBCM-20-04RBCM-20-06RBCM-22-04RBCM-22-06RBCM-25-06RBCM-25-08RBCM-28-06RBCM-28-08RBCM-30-08RBCM-30-10RBCM-32-10RBCM-35-10RBCM-38-12RBCM-40-12RBCM-42-12RBCM-50-16RBCM-6A-01RBCM-6A-02RBCM-8A-02RBCM-8A-03RBCM-10A-03RBCM-10A-04RBCM-15A-04RBCM-15A-06RBCM-20A-06RBCM-20A-08RBCM-25A-08RBCM-25A-10RBCM-32A-10RBCM-32A-12RBCM-40A-12RBCM-40A-16R
4668810101012121215151616181820202222252528283030323538404250
1/8 10.51/8 10.51/4 13.81/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.23/4 27.21 34.01 34.01 1/4 42.71 1/4 42.71 1/2 48.61 1/2 48.6
Part NumberTube O.D.
D
Dimension
TLIhHBAd
BCM-RMale Connector
Bite Type Tube Fitting for JIS & KS 10
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
2.5444668681081212121612161620222225262832323440466881212161622222831343640
67777777777.57.57.588991010101010111112121212777.57.588991010111112121212
14141814181821.51821.525.521.525.525.525.531.525.531.531.538383848.548.548.553.553.553.56614181821.521.525.525.531.531.5383848.548.553.553.566
1214141717191922222227273032363636414146464650556060607519192424323236364646555565657575
1414191719192219222724272727323232364141415050505555557017192222272732324141465060606570
2328332833333433343937414141464346465052525757575862627329333636384143465052545763646573
881281212121212141214141416141616181818202020212121258121212121414161618182020212125
22.530.531.530.531.532.533.532.533.536.537.539.539.539.542.541.542.543.545.54848.551.551.554.556.560.560.569.532.532.5363638.539.541.542.5484853.554.563.563.565.569.5
PF1/8PF1/8PF1/4PF1/8PF1/4PF1/4PF3/8PF1/4PF3/8PF1/2PF3/8PF1/2PF1/2PF1/2PF3/4PF1/2PF3/4PF3/4PF1PF1PF1
PF1 1/4PF1 1/4PF1 1/4PF1 1/2PF1 1/2PF1 1/2PF2PF1/8PF1/4PF1/4PF3/8PF3/8PF1/2PF1/2PF3/4PF3/4PF1PF1
PF1 1/4PF1 1/4PF1 1/2PF1 1/2PF2
BCM-04-01GBCM-06-01GBCM-06-02GBCM-08-01GBCM-08-02GBCM-10-02GBCM-10-03GBCM-12-02GBCM-12-03GBCM-12-04GBCM-15-03GBCM-15-04GBCM-16-04GBCM-18-04GBCM-20-06GBCM-22-04GBCM-22-06GBCM-25-06GBCM-25-08GBCM-28-08GBCM-30-08GBCM-30-10GBCM-32-10GBCM-35-10GBCM-38-12GBCM-40-12GBCM-42-12GBCM-50-16GBCM-6A-01GBCM-6A-02GBCM-8A-02GBCM-8A-03GBCM-10A-03GBCM-10A-04GBCM-15A-04GBCM-15A-06GBCM-20A-06GBCM-20A-08GBCM-25A-08GBCM-25A-10GBCM-32A-10GBCM-32A-12GBCM-40A-12GBCM-40A-16G
466881010121212151516182022222525283030323538404250
1/8 10.51/8 10.51/4 13.81/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.23/4 27.21 34.01 34.01 1/4 42.71 1/4 42.71 1/2 48.61 1/2 48.6
Part NumberTube O.D.
D
Dimension
TLI1IhHBAd
BCM-GMale Connector(For CopperGasket)
Bite Type Tube Fitting for JIS & KS 11
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
2.5444668681081212121612161620222225262832323440466881212161622222831343640
67777777777.57.57.588991010101010111112121212777.57.588991010111112121212
1414191419192219222722272727362736364141415050505555557514191922222727363641415050555575
1214141717191922222227273032363636414146464650556060607519192424323236364646555565657575
1414191719192219222724272727363236364141415050505555557017192222272732364141465060606575
2328332833333433343937414141464346465052525757575862627329333636384143465052545763646573
881281212121212141214141416141616181818202020212121258121212121414161618182020212125
22.530.531.530.531.532.533.532.533.536.537.539.539.539.542.541.542.543.545.54848.551.551.554.556.560.560.569.532.532.5363638.539.541.542.5484853.554.563.563.565.569.5
PF 1/8PF 1/8PF 1/4PF 1/8PF 1/4PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 1PF 1
PF 1 1/4PF 1 1/4PF 1 1/4PF 1 1/2PF 1 1/2PF 1 1/2PF 2PF 1/8PF 1/4PF 1/4PF 3/8PF 3/8PF 1/2PF 1/2PF 3/4PF 3/4PF 1PF 1
PF 1 1/4PF 1 1/4PF 1 1/2PF 1 1/2PF 2
BCM-04-01GOBCM-06-01GOBCM-06-02GOBCM-08-01GOBCM-08-02GOBCM-10-02GOBCM-10-03GOBCM-12-02GOBCM-12-03GOBCM-12-04GOBCM-15-03GOBCM-15-04GOBCM-16-04GOBCM-18-04GOBCM-20-06GOBCM-22-04GOBCM-22-06GOBCM-25-06GOBCM-25-08GOBCM-28-08GOBCM-30-08GOBCM-30-10GOBCM-32-10GOBCM-35-10GOBCM-38-12GOBCM-40-12GOBCM-42-12GOBCM-50-16GOBCM-6A-01GOBCM-6A-02GOBCM-8A-02GOBCM-8A-03GOBCM-10A-03GOBCM-10A-04GOBCM-15A-04GOBCM-15A-06GOBCM-20A-06GOBCM-20A-08GOBCM-25A-08GOBCM-25A-10GOBCM-32A-10GOBCM-32A-12GOBCM-40A-12GOBCM-40A-16GO
466881010121212151516182022222525283030323538404250
1/8 10.51/8 10.51/4 13.81/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.23/4 27.21 34.01 34.01 1/4 42.71 1/4 42.71 1/2 48.61 1/2 48.6
Part NumberTube O.D.
D
Dimension
TLI1IhHBAd
BCM-GOMale Connector(For O-Ring)
Bite Type Tube Fitting for JIS & KS 12
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
2.54678799121212161620222526799121622
67777777.57.57.58891010101177.588910
3.973.976.016.016.356.016.356.358.168.168.169.539.5310.3910.3912.7012.706.016.356.358.169.5310.39
10.510.5141417.51417.517.522222227.527.5343442.542.51417.517.52227.534
1214171919222227273032363641464650192432323646
1214171719191924242727303236414646172227273241
46637071727172818686869293991041091107181818693104
3041454646.54646.552.556565658.559.563.566.568.569.54652.552.55659.566.5
49.569.574.576.57776.5778790.590.590.59596102107.511111276.586.58790.596107.5
PT 1/8PT 1/8PT 1/4PT 1/4PT 3/8PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 1PT 1
PT 1 1/4PT 1 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 3/4PT 1
BLCM-04-01RBLCM-06-01RBLCM-08-02RBLCM-10-02RBLCM-10-03RBLCM-12-02RBLCM-12-03RBLCM-15-03RBLCM-15-04RBLCM-16-04RBLCM-18-04RBLCM-20-06RBLCM-22-06RBLCM-25-08RBLCM-28-08RBLCM-30-10RBLCM-32-10RBLCM-6A-02RBLCM-8A-03RBLCM-10A-03RBLCM-15A-04RBLCM-20A-06RBLCM-25A-08R
4681010121215151618202225283032
1/8 10.51/4 13.83/8 17.33/8 17.31/2 21.73/4 27.2
Part NumberTube O.D.
D
Dimension
TLI1IhHCBAd
BLCMLong Male Connector
Bite Type Tube Fitting for JIS & KS 13
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
2.5446688810101012121313141417171818202022222525262832323440881111141418182222282834344040
447477912791291291291212161216162216222231313136363646477991212161622223131363646
677777777777.57.57.57.5888899101010101010111112121212777.57.588991010111112121212
3.973.976.013.976.016.016.358.166.016.358.166.358.166.358.166.358.168.169.538.169.539.5310.399.5310.3910.3912.7012.7012.7012.7012.7012.7015.883.976.016.016.356.358.168.169.539.5310.3910.3912.7012.7012.7012.7015.88
12141417171919192222222727303032323636363641414646464650556060607519192424323236364646555565757575
12141717171719221919242424272727273030323236364141414646465055556517172222272732324141464660606565
15202323232324292424292929323232323333343436364141414646465055556223232828323234344141464657576262
22.530.533.533.533.534.535.540.535.535.540.541.541.544.544.544.544.545.545.546.546.549.549.5555555.560.560.563.569.574.574.583.534.534.5404044.544.546.546.5555563.563.577.577.583.583.5
13141716181919.5262020.52623.52625.52727.5303230.53232.533.535.537.539.539.542.543.545.548.549.549.55817192222.527.5303232.537.539.544.545.551.551.557.558
BME-04-01RBME-06-01RBME-06-02RBME-08-01RBME-08-02RBME-10-02RBME-10-03RBME-10-04RBME-12-02RBME-12-03RBME-12-04RBME-15-03RBME-15-04RBME-16-03RBME-16-04RBME-18-03RBME-18-04RBME-20-04RBME-20-06RBME-22-04RBME-22-06RBME-25-06RBME-25-08RBME-28-06RBME-28-08RBME-30-08RBME-30-10RBME-32-10RBME-35-10RBME-38-12RBME-40-12RBME-42-12RBME-50-16RBME-6A-01RBME-6A-02RBME-8A-02RBME-8A-03RBME-10A-03RBME-10A-04RBME-15A-04RBME-15A-06RBME-20A-06RBME-20A-08RBME-25A-08RBME-25A-10RBME-32A-10RBME-32A-12RBME-40A-12RBME-40A-16R
4668810101012121215151616181820202222252528283030323538404250
1/8 10.51/8 10.51/4 13.81/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.23/4 27.21 34.01 34.01 1/4 42.71 1/4 42.71 1/2 48.61 1/2 48.6
Part NumberTube O.D.
D
Dimension
TL1LIhHBAd1d
PT 1/8PT 1/8PT 1/4PT 1/8PT 1/4PT 1/4PT 3/8PT 1/2PT 1/4PT 3/8PT 1/2PT 3/8PT 1/2PT 3/8PT 1/2PT 3/8PT 1/2PT 1/2PT 3/4PT 1/2PT 3/4PT 3/4PT 1PT 3/4PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2PT 1 1/2PT 2PT 1/8PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 3/4PT 3/4PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2PT 2
BME Male Elbow
Bite Type Tube Fitting for JIS & KS 14
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
4681010121213141718202022252628
4777991212121616162222313131
777777.57.57.5889101010101111
3.976.016.016.016.356.358.168.168.169.539.539.5310.3910.3912.7012.7012.70
1417192222272730323636414146465055
1417171919242427273032363641464646
2023232424292932323334363641464646
30.533.534.535.535.541.541.544.544.545.546.549.549.95560.560.563.5
364346525361.567707782.583.590.591.5104.5104.5104.5121.5
PT 1/8PT 1/4PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/4
BLME-06-01RBLME-08-02RBLME-10-02RBLME-12-02RBLME-12-03RBLME-15-03RBLME-15-04RBLME-16-04RBLME-18-04RBLME-20-06RBLME-22-06RBLME-25-06RBLME-25-08RBLME-28-08RBLME-30-10RBLME-32-10RBLME-35-10R
68101212151516182022252528303235
Part NumberTube O.D.
D
Dimension
TL1LIhHBAd1d
BLMELong Male Elbow
4666912912121216161622222231313136
7777777.57.57.58891010101010111112
1417192222222727303236364141464646505560
1419191922272227272736363641414150505055
1417171919242424243030323636414146464650
2023232424242929323233343636414144464650
1012121212161216161617171721212121212121
30.533.534.535.535.535.541.541.544.544.545.546.549.549.55555.558.560.563.569.5
3034353636464046465252526062626666666673
PF 1/8PF 1/4PF 1/4PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 1/2PF 3/4PF 3/4PF 3/4PF 1PF 1PF 1
PF 1 1/4PF 1 1/4PF 1 1/4PF 1 1/2
4681010101212131417182020222525262832
BPME-06-01GBPME-08-02GBPME-10-02GBPME-12-02GBPME-12-03GBPME-12-04GBPME-15-03GBPME-15-04GBPME-16-04GBPME-18-04GBPME-20-06GBPME-22-06GBPME-25-06GBPME-25-08GBPME-28-08GBPME-30-08GBPME-30-10GBPME-32-10GBPME-35-10GBPME-38-12G
68101212121515161820222525283030323538
Part NumberTubeO.D.D
Dimension
TL1LI1IhH1HAd1d
BPMEO-Ring Seal Male Elbow
Bite Type Tube Fitting for JIS & KS 15
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
2.5446688101012121314171820202225252628323240811141822283440
447477979912121216161622222231313136364679121622313646
6777777777.57.57.58891010101010111112121277.58910111212
3.973.976.013.976.016.016.356.016.356.358.168.168.169.539.539.5310.3910.3910.3912.7012.7012.7012.7012.7015.886.016.358.169.5310.3912.7012.7015.88
121414171719192222272730323636414146464650556060751924323646556575
121417171717191919242427273032363641414646465055651722273241466065
152023232323242424292932323334363641414646465055622328323441465762
22.530.533.533.533.534.535.535.535.541.541.544.544.545.546.549.549.55555.560.560.563.569.574.583.534.54044.546.55563.577.583.5
13141716181919.51820.523.526273030.532.533.535.539.539.542.543.545.548.549.5581922.53032.539.545.551.558
PT 1/8PT 1/8PT 1/4PT 1/8PT 1/4PT 1/4PT 3/8PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2PT 2PT 1/4PT 3/8PT 1/2PT 3/4PT 1
PT 1 1/4PT 1 1/2PT 2
BMBT-04-01RBMBT-06-01RBMBT-06-02RBMBT-08-01RBMBT-08-02RBMBT-10-02RBMBT-10-03RBMBT-12-02RBMBT-12-03RBMBT-15-03RBMBT-15-04RBMBT-16-04RBMBT-18-04RBMBT-20-06RBMBT-22-06RBMBT-25-06RBMBT-25-08RBMBT-28-08RBMBT-30-08RBMBT-30-10RBMBT-32-10RBMBT-35-10RBMBT-38-12RBMBT-40-12RBMBT-50-16RBMBT-6A-02RBMBT-8A-03RBMBT-10A-04RBMBT-15A-06RBMBT-20A-08RBMBT-25A-10RBMBT-32A-12RBMBT-40A-16R
466881010121215151618202225252830303235384050
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
Part NumberTube O.D.
D
Dimension
TL1LIhHBAd1d
BMBTMale Branch Tee
P10P12P12P18P22P22P22P28P28P36P36P12P18P22P28P36
PF1/8PF1/4PF1/4PF3/8PF1/2PF1/2PF1/2PF3/4PF3/4PF1PF1PF1/4PF3/8PF1/2PF3/4PF1
BBE-06-01GBBE-08-02GBBE-10-02GBBE-12-03GBBE-15-04GBBE-16-04GBBE-18-04GBBE-20-06GBBE-22-06GBBE-25-08GBBE-28-08GBBE-6A-02GBBE-8A-03GBBE-10A-04GBBE-15A-06GBBE-20A-08G
68101215161820222528
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.2
4681012131417182022811141822
47791212121616222279121622
77777.57.5889101077.58910
14181821.525.525.525.531.531.538381821.525.531.538
14171922273032363641461924323646
17222227303030414150502227304150
17222227363636414250502227364150
23252529363636383842422529363842
8121212141414161618181212141618
33.535.536.540.548.548.548.550.550.555.55636.54148.550.556
13161619242424282837371619242837
14171722282828323238381722283238
PartNumber
TubeO.D.D
Dimension
d d1 A B H H1 h I I1 L L1 L2 O-Ring T
BBEBanjo Elbow
Bite Type Tube Fitting for JIS & KS 16
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
2.5446688101012121314171820202225252628323240811141822283440
447477979912121216161622222231313136364679121622313646
6777777777.57.57.58891010101010111112121277.58910111212
3.973.976.013.976.016.016.356.016.356.358.168.168.169.539.539.5310.3910.3910.3912.7012.7012.7012.7012.7015.886.016.358.169.5310.3912.7012.7015.88
121414171719192222272730323636414146464650556060751924323646556575
121417171717191919242427273032363641414646465055651722273241466065
152023232323242424292932323334363641414646465055622328323441465762
22.530.533.533.533.534.535.535.535.541.541.544.544.545.546.549.549.55555.560.560.563.569.574.583.534.54044.546.55563.577.583.5
13141716181919.51820.523.526273030.532.533.535.539.539.542.543.545.548.549.5581922.53032.539.545.551.558
PT 1/8PT 1/8PT 1/4PT 1/8PT 1/4PT 1/4PT 3/8PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2PT 2PT 1/4PT 3/8PT 1/2PT 3/4PT 1
PT 1 1/4PT 1 1/2PT 2
BMRT-04-01RBMRT-06-01RBMRT-06-02RBMRT-08-01RBMRT-08-02RBMRT-10-02RBMRT-10-03RBMRT-12-02RBMRT-12-03RBMRT-15-03RBMRT-15-04RBMRT-16-04RBMRT-18-04RBMRT-20-06RBMRT-22-06RBMRT-25-06RBMRT-25-08RBMRT-28-08RBMRT-30-08RBMRT-30-10RBMRT-32-10RBMRT-35-10RBMRT-38-12RBMRT-40-12RBMRT-50-16RBMRT-6A-02RBMRT-8A-03RBMRT-10A-04RBMRT-15A-06RBMRT-20A-08RBMRT-25A-10RBMRT-32A-12RBMRT-40A-16R
466881010121215151618202225252830303235384050
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
Part NumberTube O.D.
D
Dimension
TL1LIhHBAd1d
BMRTMale Run Tee
Bite Type Tube Fitting for JIS & KS 17
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
PT 1/8PT 1/4PT 1/4PT 3/8PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2PT 1 1/2PT 2PT 1/4PT 3/8PT 1/2PT 3/4PT 1
PT 1 1/4PT 1 1/2PT 2
35.540.541.543.541.543.546.551.551.551.553.553.554.558.56161.565.565.568.570.574.574.581.541.54651.553.56168.578.581.5
25303032303234393939414141454747515151515555603034394147515560
17191924192424303030363636464646555555656565801924303646556580
14171919222227273032363641414646465055606060751924323646556575
7777777.57.57.5889101010101011111212121277.58910111212
468810101212131417182020222525262832323440811141822283440
BCF-06-01RBCF-08-02RBCF-10-02RBCF-10-03RBCF-12-02RBCF-12-03RBCF-15-03RBCF-15-04RBCF-16-04RBCF-18-04RBCF-20-06RBCF-22-06RBCF-25-06RBCF-25-08RBCF-28-08RBCF-30-08RBCF-30-10RBCF-32-10RBCF-35-10RBCF-38-12RBCF-40-12RBCF-42-12RBCF-50-16RBCF-6A-02RBCF-8A-03RBCF-10A-04RBCF-15A-06RBCF-20A-08RBCF-25A-10RBCF-32A-12RBCF-40A-16R
68101012121515161820222525283030323538404250
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
Part NumberTube O.D.
D
Dimension
TLIH1HAd
BCFFemale Connector
BBCF-06-01RBBCF-08-02RBBCF-10-02RBBCF-10-03RBBCF-12-02RBBCF-12-03RBBCF-15-03RBBCF-15-04RBBCF-16-04RBBCF-18-04RBBCF-20-06RBBCF-22-06RBBCF-25-06RBBCF-25-08RBBCF-28-08RBBCF-30-08RBBCF-30-10RBBCF-32-10R
PT 1/8PT 1/4PT 1/4PT 3/8PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1
PT 1 1/4PT 1 1/4
12.514.516.516.518.518.522.522.524.526.528.530.535.535.538.540.540.542.5
131313131313151515151515151515151515
42.542.543.543.543.543.549.549.549.551.551.551.552.552.55555.555.557.5
323232323232373737393939393941414143
131818201820202525252727273131313535
171922222424272730323236414146464646
171919241924243030303636414646465555
141719192222272730323636414146464650
7777777.57.57.5889101010101011
46881010121213141718202022252526
6810101212151516182022252528303032
Part Number
Tube O.D.D
Dimension
TNSLI1IH2H1HAd
BBCFBulkhead FemaleConnector
Bite Type Tube Fitting for JIS & KS 18
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
BFGC-04-02GBFGC-04-03GBFGC-06-02GBFGC-06-03GBFGC-06-04GBFGC-08-02GBFGC-08-03GBFGC-08-04GBFGC-10-02GBFGC-10-03GBFGC-10-04GBFGC-12-02GBFGC-12-03GBFGC-12-04G
44666888101010121212
1415141516141516141516141516
66777777777777
1212141414171717191919222222
1924192430192430192430192430
2930323436323436323436323436
36.537.542.544.546.542.544.546.543.545.547.543.545.547.5
PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2
Part NumberTube O.D.
Da A H h I L T
BFE-08-02RBFE-10-02RBFE-12-02RBFE-12-03RBFE-15-03RBFE-15-04RBFE-16-04RBFE-18-04RBFE-20-06RBFE-22-06RBFE-25-06RBFE-25-08RBFE-28-08RBFE-30-10RBFE-32-10RBFE-35-10R
8101212151516182022252528303235
PT 1/4PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/4
24242429293333333636364646555555
34.535.535.540.541.545.545.545.548.548.549.559.56069.569.572.5
24242429293333333636364646555555
19191924243030303636364646555555
17192222272730323636414146465055
77777.57.57.5889101010101111
681010121213141718202022252628
Part NumberTube O.D.
DTL1LIhHAd
BFGCFemale Gauge Connector
BFEFemale Elbow
Bite Type Tube Fitting for JIS & KS 19
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
BFBT-08-02RBFBT-10-02RBFBT-12-02RBFBT-12-03RBFBT-15-03RBFBT-15-04RBFBT-16-04RBFBT-18-04RBFBT-20-06RBFBT-22-06RBFBT-25-06RBFBT-25-08RBFBT-28-08RBFBT-30-08RBFBT-30-10RBFBT-32-10RBFBT-35-10RBFBT-6A-02RBFBT-8A-03RBFBT-10A-04RBFBT-15A-06RBFBT-20A-08RBFBT-25A-10R
810121215151618202225252830303235
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.0
6810101212131417182020222525262881114182228
77777.57.57.58891010101010111177.5891011
1719222227273032363641414646465055192432364655
1919192424303030363636464646555555192430364655
2424242929333333363636464646555555242933364655
34.535.535.540.541.545.545.545.548.548.549.559.56060.569.569.572.535.54145.548.56072.5
2424242929333333363636464646555555242933364655
PT 1/4PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/4PT 1/4PT 3/8PT 1/2PT 3/4PT 1
PT 1 1/4
Part NumberTube O.D.
DTL1LIhHAd
BFBTFemale Branch Tee
BFRT-08-02RBFRT-10-02RBFRT-12-02RBFRT-12-03RBFRT-15-03RBFRT-15-04RBFRT-16-04RBFRT-18-04RBFRT-20-06RBFRT-22-06RBFRT-25-06RBFRT-25-08RBFRT-28-08RBFRT-30-08RBFRT-30-10RBFRT-32-10RBFRT-35-10RBFRT-6A-02RBFRT-8A-03RBFRT-10A-04RBFRT-15A-06RBFRT-20A-08RBFRT-25A-10R
810121215151618202225252830303235
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.0
6810101212131417182020222525262881114182228
77777.57.57.58891010101010111177.5891011
1719222227273032363641414646465055192432364655
1919192424303030363636464646555555192430364655
2424242929333333363636464646555555242933364655
34.535.535.540.541.545.545.545.548.548.549.559.56060.569.569.572.535.54145.548.56072.5
2424242929333333363636464646555555242933364655
PT 1/4PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/4PT 1/4PT 3/8PT 1/2PT 3/4PT 1
PT 1 1/4
Part NumberTube O.D.
DTL1LIhHAd
BFRTFemale Run Tee
Bite Type Tube Fitting for JIS & KS 20
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
BC-06BC-08BC-10BC-12BC-15BC-16BC-18BC-20BC-22BC-25BC-28BC-30BC-32
28.529.531.531.534.536.536.536.537.538.54242.544.5
18192020222424242525282830
14171719242727303236414146
14171922273032363641464650
77777.57.588910101011
681012151618202225283032
Part NumberTube O.D.
DLIhHA
BCCap
BPL-06BPL-08BPL-10BPL-12BPL-15BPL-16BPL-18BPL-20BPL-22BPL-25BPL-28BPL-30BPL-32
681012151618202225283032
9111315181921232528.531.533.535.5
8101214171820222427.430.432.434.4
13.513.514.514.5161617.517.517.519192020
Part NumberTube O.D.
DA d L
BPLPlug
Bite Type Tube Fitting for JIS & KS 21
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
BNT-04BNT-06BNT-08BNT-10BNT-12BNT-15BNT-16BNT-18BNT-20BNT-22BNT-25BNT-28BNT-30BNT-32BNT-35BNT-38BNT-40BNT-42BNT-50BNT-6ABNT-8ABNT-10ABNT-15ABNT-20ABNT-25ABNT-32ABNT-40A
46810121516182022252830323538404250
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
121417192227303236364146465055606060751924323646556575
10.515151616191919191920212222252729.529.531.516181919212530.531.5
M10X1.25M12X1.5M14X1.5M16X1.5M18X1.5M22X1.5M24X1.5M26X1.5M28X1.5M30X1.5M35X1.5M38X1.5M40X1.5M42X1.5M45X1.5M48X1.5M52X2M52X2M64X2M16X1.5M20X1.5M26X1.5M30X1.5M38X1.5M45X1.5M56X2M64X2
Part NumberTube O.D.
DH L T
BNTNut
BCR-04BCR-06BCR-08BCR-10BCR-12BCR-15BCR-16BCR-18BCR-20BCR-22BCR-25BCR-28BCR-30BCR-32
4681012151618202225283032
7991010101010101011111111
BS-35BS-38BS-40BS-42BS-50BS-6ABS-8ABS-10ABS-15ABS-20ABS-25ABS-30ABS-40A
3538404250
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
14141414141010101011141414
Part NumberTube O.D.
DL Part Number
Tube O.D.D
L
BCRSleeve
Bite Type Tube Fitting for JIS & KS 22
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
BHMU-08-02GBHMU-08-03GBHMU-10-02GBHMU-10-03GBHMU-10-04GBHMU-12-02GBHMU-12-03GBHMU-12-04GBHMU-15-03GBHMU-15-04GBHMU-16-03GBHMU-16-04GBHMU-18-04GBHMU-20-06GBHMU-22-04GBHMU-22-06GBHMU-25-06GBHMU-25-08GBHMU-28-06GBHMU-28-08GBHMU-30-06GBHMU-30-08GBHMU-32-08GBHMU-32-10G
8810101012121215151616182022222525282830303232
PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 3/4PF 1PF 3/4PF 1PF 1
PF 1 1/4
45.547.546.548.551.546.548.551.552.554.552.554.554.558.556.558.560.562.5636563.565.566.570.5
353735374035374040424042424644464749495149515256
171917192219192224242727273032323636414141414646
171719191922222227273030323636364141464646465050
777777777.57.57.57.588991010101010101111
666886910912912121612161620162216222228
Part Number Tube O.D.D
d A H h I L T
BHMUHose Male Union
BHFU-08-02GBHFU-08-03GBHFU-10-02GBHFU-10-03GBHFU-10-04GBHFU-12-02GBHFU-12-03GBHFU-12-04GBHFU-15-03GBHFU-15-04GBHFU-16-03GBHFU-16-04GBHFU-18-04GBHFU-20-06GBHFU-22-04GBHFU-22-06GBHFU-25-06GBHFU-25-08GBHFU-28-06GBHFU-28-08GBHFU-30-06GBHFU-30-08GBHFU-32-08GBHFU-32-10GBHFU-38-12GBHFU-40-12GBHFU-50-16G
8810101012121215151616182022222525282830303232384050
PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 3/4PF 1PF 3/4PF 1PF 1
PF 1 1/4PF 1 1/2PF 1 1/2PF 2
43.544.544.545.549.544.545.549.549.552.549.552.552.555.554.555.557.559.5606260.562.563.569.576.581.591.5
333433343833343837403740404342434446464846484955576270
171917192219192224242727273032323636414141414646505565
171719191922222227273030323636364141464646465050606075
777777777.57.57.57.588991010101010101111121212
666886910912912121612161620162216222228323240
Part Number Tube O.D.D
d A H h I L T
BHFUHose Female Union
Bite Type Tube Fitting for JIS & KS 23
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 3/4PF 1PF 3/4PF 1PF 1
PF 1 1/4
131313131313131315151515151515151515151515151515
14.514.516.516.516.518.518.518.522.522.524.524.526.528.530.530.535.535.538.538.540.540.542.542.5
42.542.543.543.543.543.543.543.549.549.549.549.551.551.551.551.552.552.5555555.555.557.557.5
65.567.567.569.571.567.569.571.575.577.577.579.581.583.582.584.587.589.5899189.591.595.599.5
323232323232323237373737393939393939414141414343
232524262824262826282830303231333335343634363842
191922222224242427273030323236364141464646465050
171719191922222227273030323636364141464646465050
777777777.57.57.57.588991010101010101111
666886910912912121612161620162216222228
8810101012121215151616182022222525282830303232
BHBMU-08-02GBHBMU-08-03GBHBMU-10-02GBHBMU-10-03GBHBMU-10-04GBHBMU-12-02GBHBMU-12-03GBHBMU-12-04GBHBMU-15-03GBHBMU-15-04GBHBMU-16-03GBHBMU-16-04GBHBMU-18-04GBHBMU-20-06GBHBMU-22-04GBHBMU-22-06GBHBMU-25-06GBHBMU-25-08GBHBMU-28-06GBHBMU-28-08GBHBMU-30-06GBHBMU-30-08GBHBMU-32-08GBHBMU-32-10G
Part NumberMax. PanelThickness
S
PanelHole
Drill SizeL1LI1IhHAd
TubeO.D.D
T
BHBMUHose BulkheadMale Union
PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 3/4PF 1PF3 /4PF 1PF 1
PF 1 1/4PF 1 1/2PF 1 1/2PF 2
131313131313131315151515151515151515151515151515151515
14.514.516.516.516.518.518.518.522.522.524.524.526.528.530.530.535.535.538.538.540.540.542.542.548.552.564.5
42.542.543.543.543.543.543.543.549.549.549.549.551.551.551.551.552.552.5555555.555.557.557.564.569.571.5
63.564.565.566.569.565.566.569.572.575.574.577.579.580.580.581.582.584.5868886.588.592.598.5106.5113.5124.5
323232323232323237373737393939393939414141414343455050
212222232622232623262528282929303032313331333541424453
191922222224242427273030323236364141464646465050556070
171719191922222227273030323636364141464646465050606075
777777777.57.57.57.588991010101010101111121212
666886910912912121612161620162216222228313240
8810101012121215151616182022222525282830303232384050
BHBFU-08-02GBHBFU-08-03GBHBFU-10-02GBHBFU-10-03GBHBFU-10-04GBHBFU-12-02GBHBFU-12-03GBHBFU-12-04GBHBFU-15-03GBHBFU-15-04GBHBFU-16-03GBHBFU-16-04GBHBFU-18-04GBHBFU-20-06GBHBFU-22-04GBHBFU-22-06GBHBFU-25-06GBHBFU-25-08GBHBFU-28-06GBHBFU-28-08GBHBFU-30-06GBHBFU-30-08GBHBFU-32-08GBHBFU-32-10GBHBFU-38-12GBHBFU-40-12GBHBFU-50-16G
Part NumberMax. PanelThickness
S
PanelHole
Drill SizeL1LI1IhHAd
TubeO.D.D
T
BHBFUHose BulkheadFemale Union
Bite Type Tube Fitting for JIS & KS 24
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 3/4PF 1PF 3/4PF 1PF 1
PF 1 1/4
252828283428283433343638384140424446474947495456
33.534.535.535.540.535.535.540.541.541.544.544.544.545.546.546.549.549.5555555.555.560.560.5
232424242924242929293232323334343636414141414646
171919192419192424242727273032323636414141414646
171719191922222227273030323636364141464646465050
777777777.57.57.57.588991010101010101111
6969126912912912121612161620162216222228
6688810101012121313141718182020222225252626
8810101012121215151616182022222525282830303232
BHME-08-02GBHME-08-03GBHME-10-02GBHME-10-03GBHME-10-04GBHME-12-02GBHME-12-03GBHME-12-04GBHME-15-03GBHME-15-04GBHME-16-03GBHME-16-04GBHME-18-04GBHME-20-06GBHME-22-04GBHME-22-06GBHME-25-06GBHME-25-08GBHME-28-06GBHME-28-08GBHME-30-06GBHME-30-08GBHME-32-08GBHME-32-10G
Part NumberTubeO.D.D
d d1 A H h I L L1 T
TubeO.D.D
d d1 A H h I L L1 T
PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 3/4PF 1PF 3/4PF 1PF 1
PF 1 1/4PF 1 1/2PF 1 1/2PF 2
252726273326273330333336363838394143444644465157616272
33.534.535.535.540.535.535.540.541.541.544.544.544.545.546.546.549.549.5555555.555.560.560.569.574.583.5
232424242924242929293232323334343636414141414646505562
171919192419192424242727273032323636414141414646505565
171719191922222227273030323636364141464646465050606075
777777777.57.57.57.588991010101010101111121212
6969126912912912121612161620162216222228343446
6688810101012121313141718182020222225252626323240
8810101012121215151616182022222525282830303232384050
BHFE-08-02GBHFE-08-03GBHFE-10-02GBHFE-10-03GBHFE-10-04GBHFE-12-02GBHFE-12-03GBHFE-12-04GBHFE-15-03GBHFE-15-04GBHFE-16-03GBHFE-16-04GBHFE-18-04GBHFE-20-06GBHFE-22-04GBHFE-22-06GBHFE-25-06GBHFE-25-08GBHFE-28-06GBHFE-28-08GBHFE-30-06GBHFE-30-08GBHFE-32-08GBHFE-32-10GBHFE-38-12GBHFE-40-12GBHFE-50-16G
BHMEHoseMale Elbow
Part Number T
BHFEHose Female Elbow
Bite Type Tube Fitting for JIS & KS 25
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 3/4PF 1PF 3/4PF 1
13131313131313131515151515151515151515151515
14.514.516.516.516.518.518.518.522.522.524.524.526.528.530.530.535.535.538.538.540.540.5
881010101212121515161618202222252528283030
668881010101212131314161818202022222525
696912691291291212161216162016221622
777777777.57.57.57.58899101010101010
17171919192222222727303032363638414146464646
19192222222424242727303032323636414146464646
19192222242424242727303032323636414146464646
46464848494949495757595963656565686874747474
42.542.543.543.543.543.543.543.549.549.549.549.551.551.551.551.552.552.5555555.555.5
56.556.559.559.560.560.560.560.569.569.571.571.575.577.577.577.581.581.5888888.588.5
28302830353133353637373839404040434348484848
BHBME-08-02GBHBME-08-03GBHBME-10-02GBHBME-10-03GBHBME-10-04GBHBME-12-02GBHBME-12-03GBHBME-12-04GBHBME-15-03GBHBME-15-04GBHBME-16-03GBHBME-16-04GBHBME-18-04GBHBME-20-06GBHBME-22-04GBHBME-22-06GBHBME-25-06GBHBME-25-08GBHBME-28-06GBHBME-28-08GBHBME-30-06GBHBME-30-08G
Part NumberMax. PanelThickness
S
PanelHole
Drill SizeL1
TubeO.D.D
TLI1IhH1HAd1d
BHBMEHose BulkheadMale Elbow
PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 3/4PF 1PF 3/4PF 1
13131313131313131515151515151515151515151515
14.514.516.516.516.518.518.518.522.522.524.524.526.528.530.530.535.535.538.538.540.540.5
881010101212121515161618202222252528283030
668881010101212131314161818202022222525
696912691291291212161216162016221622
777777777.57.57.57.58899101010101010
17171919192222222727303032363636414146464646
19192222222424242727303032323636414146464646
19192222242424242727303032323636414146464646
46464848494949495757595963656565686874747474
42.542.543.543.543.543.543.543.549.549.549.549.551.551.551.551.552.552.5555555.555.5
56.556.559.559.560.560.560.560.569.569.571.571.575.577.577.577.581.581.5888888.588.5
26272829333030333336343737404040434348484848
BHBFE-08-02GBHBFE-08-03GBHBFE-10-02GBHBFE-10-03GBHBFE-10-04GBHBFE-12-02GBHBFE-12-03GBHBFE-12-04GBHBFE-15-03GBHBFE-15-04GBHBFE-16-03GBHBFE-16-04GBHBFE-18-04GBHBFE-20-06GBHBFE-22-04GBHBFE-22-06GBHBFE-25-06GBHBFE-25-08GBHBFE-28-06GBHBFE-28-08GBHBFE-30-06GBHBFE-30-08G
Part NumberMax. PanelThickness
S
PanelHole
Drill SizeL1
TubeO.D.D
TLI1IhH1HAd1d
BHBFEHose BulkheadFemale Elbow
Bite Type Tube Fitting for JIS & KS 26
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
BWC-06BWC-08BWC-10BWC-12BWC-15BWC-16BWC-18BWC-20BWC-22BWC-25BWC-28BWC-30BWC-32BWC-35BWC-38BWC-40BWC-50BWC-6ABWC-8ABWC-10ABWC-15ABWC-20ABWC-25ABWC-32ABWC-40A
68101215161820222528303235384050
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
12141618212225282833363940434546571619242833404755
4681012131417182022252628323240811141822283440
77777.57.5889101010111112121277.58910111212
14171922273032363641464650556060751924323646556575
14171719242727303236414146465055651722273241466065
29343434404444464651555556565865703440444652566570
11151515182222222226282828282830301518222225282830
39.544.545.545.552.556.556.558.558.564.56969.570.573.577.584.591.545.55256.558.56673.585.591.5
Part NumberTube O.D.
DLI1IhHAdD1
BWCWeldingConnector
4681012131417182022252628323240811141822283440
77777.57.5889101010111112121277.58910111212
14171922273032363641464650556060751924323646556575
16161920252828323238394646465555651922283239465865
74747474787878787878828282828290907478787882829090
9595979710310310310310310511011111111712112913397102103103110117131133
BWBU-06BWBU-08BWBU-10BWBU-12BWBU-15BWBU-16BWBU-18BWBU-20BWBU-22BWBU-25BWBU-28BWBU-30BWBU-32BWBU-35BWBU-38BWBU-40BWBU-50BWBU-6ABWBU-8ABWBU-10ABWBU-15ABWBU-20ABWBU-25ABWBU-32ABWBU-40A
68101215161820222528303235384050
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
Part NumberTube O.D.
Dd A H D1 I L
BWBUWelding BulkheadUnion
Bite Type Tube Fitting for JIS & KS 27
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
6810101212151516182022252528303032384050
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
3566788101112141416171820202226283469111418232933
3.976.016.016.356.016.356.358.168.168.169.539.539.5310.3910.3910.3912.7012.7012.7012.7015.886.016.358.169.5310.3912.7012.7015.88
32353636.53737.540.543434346.547.549.552.552.553.5555664.564723638.54347.552.5596772
677777888810101011111112121414207881011121720
2020212122222424242425262828282929303636372122242628333637
1214141914191922222227272736363646465050651419222736465065
PT 1/8PT 1/4PT 1/4PT 3/8PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1
PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2PT 2PT 1/4PT 3/8PT 1/2PT 3/4PT 1
PT 1 1/4PT 1 1/2PT 2
Part NumberTube O.D.
DTLI1IhAd
BAP-06-01RBAP-08-02RBAP-10-02RBAP-10-03RBAP-12-02RBAP-12-03RBAP-15-03RBAP-15-04RBAP-16-04RBAP-18-04RBAP-20-06RBAP-22-06RBAP-25-06RBAP-25-08RBAP-28-08RBAP-30-08RBAP-30-10RBAP-32-10RBAP-38-12RBAP-40-12RBAP-50-16RBAP-6A-02RBAP-8A-03RBAP-10A-04RBAP-15A-06RBAP-20A-08RBAP-25A-10RBAP-32A-12RBAP-40A-16R
BAP-RAdapter
PF 1/8PF 1/4PF 1/4PF 3/8PF 1/4PF 3/8PF 3/8PF 1/2PF 1/2PF 1/2PF 3/4PF 3/4PF 3/4PF 1PF 1PF 1
PF 1 1/4PF 1 1/4PF 1 1/2PF 1 1/2PF 2PF 1/4PF 3/8PF 1/2PF 3/4PF 1
PF 1 1/4PF 1 1/2PF 2
812121212121214141416161618181820202121241212141618202124
89910910101313131616161818212121212128910131618212328
2020212122222424242425262828282929303636372122242628333637
1419192219222227272732323241414150505555701922273241505570
14181821.51821.521.525.525.525.531.531.531.538383848.548.553.553.5661821.525.531.53848.553.566
3566788101112141416171820202226283469111418232933
BAP-06-01GBAP-08-02GBAP-10-02GBAP-10-03GBAP-12-02GBAP-12-03GBAP-15-03GBAP-15-04GBAP-16-04GBAP-18-04GBAP-20-06GBAP-22-06GBAP-25-06GBAP-25-08GBAP-28-08GBAP-30-08GBAP-30-10GBAP-32-10GBAP-38-12GBAP-40-12GBAP-50-16GBAP-6A-02GBAP-8A-03GBAP-10A-04GBAP-15A-06GBAP-20A-08GBAP-25A-10GBAP-32A-12GBAP-40A-16G
6810101212151516182022252528303032384050
1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6
Part Number Tube O.D. (D) d A h I I1 I2 T
BAP-GAdapter
Bite Type Tube Fitting for JIS & KS 28
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
BRD-08-06BRD-10-06BRD-10-08BRD-12-06BRD-12-08BRD-12-10BRD-15-08BRD-15-10BRD-16-06BRD-16-10BRD-16-12BRD-18-10BRD-18-15BRD-20-06BRD-20-12BRD-20-16BRD-22-15BRD-22-18BRD-25-16BRD-25-20BRD-28-18BRD-28-22BRD-30-20BRD-30-25BRD-32-25BRD-35-22BRD-35-28BRD-28-25BRD-38-30BRD-8A-6ABRD-10A-6ABRD-10A8ABRD-15A-8ABRD-15A-10ABRD-20A-10ABRD-20A-15ABRD-25A-20ABRD-32A-25A
810101212121515161616181820202022222525282830303235353838
1/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.23/4 27.21 34.01 34.0
66868108106101210156121615181620182220252522282530
1/8 10.51/8 10.51/4 13.81/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.2
7777777777777.5777.57.587.5889810109101010777.57.5889910
1414171417191719141922192714223027323036323636414136464146191924243232363646
1414171417171717171719192422222724272730303232363636414141171922242730323641
3940404141414343434343444545454748485052525253545558606163414446484852525860
44646868481081241013121413171418172020182220258811111414181822
49.550.550.551.551.552.553.554.553.554.554.555.557.555.556.559.560.560.562.564.564.564.565.567.568.570.57474.577.552.555.5586060.564.564.570.574
Part NumberTube O.D.
LIhHAdD1 D
BRDReducer
Tube O.D.D
d d1 A H h I I1 L
101215161820222528303238
81012131417182022252632
6810111214141718202226
777.57.58891010101112
192227303236364146465060
171924272730323641414650
232429323233343641415050
212224242425262828293036
34.535.544.544.544.545.546.549.55555.564.569.5
353740434345464953546672
BAE-10BAE-12BAE-15BAE-16BAE-18BAE-20BAE-22BAE-25BAE-28BAE-30BAE-32BAE-38
Part Number L1
BAEAdjustable Elbow
Bite Type Tube Fitting for JIS & KS 29
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS
Adjustable Branch Tee
3537434343454649
34.535.544.544.544.545.546.549.5
2122242424252628
2324323232333436
1719242727303236
1922273032363641
777.57.588910
68101112141417
810121314171820
1012151618202225
BABT-10BABT-12BABT-15BABT-16BABT-18BABT-20BABT-22BABT-25
Part Number L1LI1IhHAd1dTube O.D.D
BABT
Adjustable Run Tee
3537434343454649
34.535.544.544.544.545.546.549.5
2122242424252628
2324323232333436
1719242727303236
1922273032363641
777.57.588910
68101112141417
810121314171820
1012151618202225
BART-10BART-12BART-15BART-16BART-18BART-20BART-22BART-25
Part Number L1LI1IhHAd1dTube O.D.D
BART
Bite Type Tube Fitting for JIS & KS 30
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Air Purge Valve (Tube End)
7/327/327/327/325/165/165/165/165/165/165/167/325/165/165/165/16
56565758747474757678785772747679
13131313191919191919191319191919
14141414272727272727301427272730
3333444444434444
4444666666646666
6810121516182022252810.513.817.321.727.2
BAPV-06BAPV-08BAPV-10BAPV-12BAPV-15BAPV-16BAPV-18BAPV-20BAPV-22BAPV-25BAPV-28BAPV-6ABAPV-8ABAPV-10ABAPV-15ABAPV-20A
Part NumberD E d H H1 L Ball
Dimension
4466
3344
14141927
13131319
51535469
7/327/327/325/16
PT 1/8PT 1/4PT 3/8PT 1/2
BAPV-01RBAPV-02RBAPV-03RBAPV-04R
Part NumberD d H H1 L Ball T
Dimension
BAPV
Air Purge Valve (Thread End)
BAPV-R
Bite Type Tube Fitting for JIS & KS 31
Bite Type Tube Fitting for JIS & KS
MATERIAL COMPARISON LIST
163
0.60~0.90
0.60~0.90
0.50~0.80
0.030MAX.
0.040MAX.
0.045MAX.
0.035MAX.
0.050MAX.
0.045MAX.
58(MIN.)
56
60(MIN.)
35(MIN.)
49
34(MIN.)
20(MIN.)
15
18(MIN.)
167~229Normalizing
206(MIN.)Normalizing
0.42~0.48
0.43~0.50
0.42~0.50
0.15~0.35
0.10~0.20
0.15~0.35
JIS G4051 S45C
AISI 1045 & SAE 1045
DIN 1652 C45
Material Tensilestrength(kg/mm2)
Yield point(kg/mm2)
Elongation(%)
HardnessSPMnSiC
Chemical Compositions(%) Mechanical Properties
APPLICABLE TUBE LISTSelection from those listed below is recommended.
4
6
8
10
12
15
16
18
20
22
25
28
30
35
38
42
50
TubeThicknessTolerance
0.50.1
1.00.15
1.50.2
2.00.2
2.50.25
3.00.3
3.00.33
3.50.35
4.00.4
4.50.45
5.00.5
5.50.55
6.00.6
7.00.7
8.0 9.0
OutsideDiameter
Tolerance
0.1
0.15
0.2
Note : 1. The area enclosed by thick line indicates the specified range of tube thickness against the outer diameters. (JOHS-102-1964)
2. Without for some particular reasons, it is recommended to use thickness indicated by O mark.
Bite Type Tube Fitting for JIS & KS 32
CARBON STEEL TUBING JAPANESE STANDARDS
< 0.25
0.10~0.35
0.30~1.10
< 0.035
< 0.035
0 < 0.30
0.10~0.35
0.30~1.40
< 0.035
< 0.035
0.08~0.18
0.10~0.35
0.30~0.60
< 0.035
< 0.035
< 0.20
< 0.20
< 0.35
0.25~0.60
< 0.040
< 0.040
0.08~0.18
0.10~0.35
0.30~0.60
< 0.035
< 0.035
< 0.20
< 0.20
< 0.035
0.25~0.60
< 0.040
< 0.040
0.10 < 22
28~35 0.15
42~50 0.20
0.10<22
28~35+0.15
42~50+0.2
0.10 < 25
30~38 0.15
0.10 < 25
30~38 0.15
Under 40mm :0.3mm
40mm or Over :0.8%
Under 40mm :0.3mm
40mm or Over :0.8%
0.5 20%
1.0~1.5 15%
10% > 2.0
0.5 20%
1.0~1.5 15%
10% > 2.0
1.0 0.15
1.5 0.20
10% > 2.0
1.0 0.15
1.5 0.20
10% > 2.0
Under 2mm :0.2mm
2mm or Over :10%
Under 2mm :0.2mm
2mm or Over :10%
< 6000+10-0
> 6000+15-0
< 6000+10-0
> 6000+15-0
< 6000+10-0
> 6000+15-0
< 6000+10-0
> 6000+15-0
greater thanspecified length
greater thanspecified length
C
Si
Mn
P
S
Cu
Tensilestrength(kg/mm2)
Outsidediameter(mm)
Wall thickness(mm)
Length(mm)
Eddy currentflaw detection
50 50 50 50 P = 200S t/D P = 200S t/DWater pressuretest(kg/cm2)
< 45 < 45 < 45 < 45 > 42 > 38
Yieldpoint(kg/mm2)
> 18 > 20 > 18 > 18 > 25 > 22
Elongation(%) > 35 > 35 > 30 > 30 > 25 > 30
Chemicalcomposition(%)
Mechanicalproperty
Dimensionaltolerance
Inspection and test
Relevant standardsJOHS hydraulic line service
JIS B2351 bite type fitting
JIS G3455 carbon steel pipes for high pressure service
Quality characteristic OST.1 OST.2 STPS.1 STPS.2 STS.40 STS.370
Bite Type Tube Fitting for JIS & KS 33
Bite Type Tube Fitting for JIS & KS
MALE STUD FORM AND SEALING
PF 1/8PF 1/4PF 3/8PF 1/2PF 3/4PF 1
PF 1 1/4PF 1 1/2PF 2
T
182428344551626876
11.615.618.622.629.835.844.850.867.2
17.420.924.429.434.941.950.957.469.4
9.713.116.620.926.433.241.947.859.6
18.222.226.232.238.242.353.360.372.3
141922273641505575
141821.525.531.53848.553.566
101414171922242529
1.01.52.02.52.52.52.52.52.5
152020252731333438
2.02.52.52.53.53.53.53.53.5
111111111
P 8P 11P 14P 18P 24P 29P 38P 44P 56
BBS-01BBS-02BBS-03BBS-04BBS-06BBS-08BBS-10BBS-12BBS-16
BCG-01BCG-02BCG-03BCG-04BCG-06BCG-08BCG-10BCG-12BCG-16
d1 d2+0.10 d3+0.30 d5+0.30Maxd4
d6 d7Minl1
Maxl2
Minl3
l4+0.40 l5O-Ring Bonded Seal Copper Gasket
Suitable Seal
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Bite Type Tube Fitting for JIS & KS 34
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
BCG-01BCG-02BCG-03BCG-04BCG-06BCG-08BCG-10BCG-12BCG-16
Part Number
PF 1/8PF 1/4PF 3/8PF 1/2PF 3/4PF 1
PF 1 1/4PF 1 1/2PF 2
MaleThread
101417222734434961
d
182226323842536072
D
222222222
T
BBS-01BBS-02BBS-03BBS-04BBS-06BBS-08BBS-10BBS-12BBS-16
Part Number
PF 1/8PF 1/4PF 3/8PF 1/2PF 3/4PF 1
PF 1 1/4PF 1 1/2PF 2
MaleThread
9.913.316.821.126.633.442.148.059.8
d
1720.5242934.541.550.55769
D
222222.32.32.32.3
T
COPPER GASKET BONDED SEAL
Bite Type Tube Fitting for JIS & KS 35
SUPERLOK TUBE FITTINGS BITE TYPE TUBE FITTINGS INSTRUMENT THREAD FITTINGS BALL VALVE 120 SERIES
BALL VALVE 210 SERIES BALL VALVE 360 SERIES PLUG VALVES MANIFOLD VALVES
INTEGRAL BONNET NEEDLE VALVES UNION BONNET NEEDLE VALVES CHECK VALVES SWING-OUT BALL VALVES
TOGGLE VALVES QUICK CONNECTS DOUBLE BLOCK&BLEED VALVES VACUUM CLAMP
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 9000 psig @100 F(38 C)OPERATING TEMPERATURE RANGE: -325 F(-198 C) TO 1200 F(648 C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 100~630 barg @100 °F(38°C)OPERATING TEMPERATURE RANGE: 800 °F(427°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 10000 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -325 °F(-198°C) TO 1200 °F(648°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 2500 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: 50 °F(10°C) TO 150 °F(65°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 1000 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 450 °F(232°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 10000 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: -22 °F(-30°C) TO 265 °F(130°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 3000 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: -10 °F(-23°C) TO 400 °F(204°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 6000 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 450 °F(232°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 5000 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 450 °F(232°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 6000 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 1200 °F(648°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 3000 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: -10 °F(-23°C) TO 375 °F(191°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 3000 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -20 °F(-28°C) TO 450 °F(232°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 300 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -20 °F(-28°C) TO 200 °F(93°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 3000 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: -10 °F(-23°C) TO 400 °F(204°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: CLASS2500 (6000 psig) @100 °F(38°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 400 °F(204°C) WITH PEEK SEAT
PRODUCTS
BMT- CTJ Rev. 3 (12. 02. 10)