jeres l-105 piping line class and material specifications

JERES-L-105 Piping Line Class

and Material Specifications

Revision 5

Responsibility JER Engineering Division

20 May 2009

Jubail Export Refinery Engineering Standard


JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009

This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by

any means without prior approval by the Company.

of 403

Revision Tracking

Revision Revision Date Scope of Revision

5 20 May 2009 Revised to update paragraph: 9.7.1, 10.12.2, add 10.27.6 & 10.27.7, 10.33.2, 10.33.3, Appendix C.

4 10 February 2009

Revised to update paragrahs: 4.2, 6.9, 7.6, 7.9, 10.12, 10.14, 10.18, 10.27, 10.28, 10.32.2, 10.33.3, all paragraphs relevant to piping line classes in 1.25 Cr – 0.5 Mo and 2.25 Cr - 1 Mo. Add new paragrahs: 9.7, 10.5.7, 10.5.8, 10.6.5, 10.16.25, 10.16.26, 10.16.27, 10.17.15, 10.17.16, 10.21.39, 10.25.17, 10.25.18, 10.37

3 19 November 2008 Revised to update paragraphs: 3.2, 10.2.15,10.2.16

2A 30 September 2008 Revised to update paragraphs: 10.3.4 Add new paragraphs:10.1.3, 10.1.6

2 31 July 2008 Revised to update paragraphs: 1.2, 5, 6, 6.9, 7, 9,10.14, 10.19, 10.26, 10.33 Add new paragraphs: 10.35, 10.36

1 20 May 2008 Updating Issued for bid package Rev. 0 to incorporate technical comments.

0 30 April 2008 Issued for bid package.

03 31 March 2008 Issued for bid package for review.

02 18 December 2007 Issued to add new piping line classes and to incorpotae the utility section to be consistent with others.

01 10 August 2007 The first official JERES-L-105 is issued.

00 03 August 2007 First draft issued is based on Saudi Aramco SAMSS-L-105 “Piping Material Specifications” issue date 30 September, 2003. Document was modified to incorporate amendments and modifications.





of 403

Table of Contents

Section Contents Page

1 Scope 6

2 Conflicts and Deviations 6

3 References 6

4 Definitions 13

5 Piping Line Class Designator System 15

6 Design Requiurements 18

7 Materials Limitation 21

8 Materials Procurement 23

9 Specific Rules for Piping Line Class Tables 23

10 Piping Line Classes 26

10.1 Impact Tested Carbon Steel Line Classes 26

10.2 Basic Carbon Steel Line Classes 32

10.3 HIC Resistant Carbon Steel Line Classes 54

10.4 Carbon Steel Amine Services Line Classes 79

10.5 Carbon Steel Flare System Services Line Classes 89

10.6 Carbon & Low Alloy Steel Boiler Piping Service Line Classes 97

10.7 Carbon & Low Alloy Steel Piping Catalyst & Slurry Services Line Classes 102

10.8 Carbon Steel Caustic Services Line Classes 114





of 403

10.9 Carbon Steel for Sulfuric Acid Services Line Classes 121

10.10 Carbon steel for Hydrogen Services Line Classes 126

10.11 Carbon steel for Jacketing Service Line Classes 144

10.12 Galvanized Carbon steel Line Classes 146

10.13 Carbon Steel for Toxic and Benzene Service (<95% wt) Line Classes 150

10.14 Carbon Steel for Highly Viscous Service Line Classes 155

10.15 Carbon Steel for Ammonium Bisulfide Service Line Classes 158

10.16 Low and Medium Alloys Steel for Process Services 164

10.17 Low and Medium Alloy Steel for Hydrogen Services 191

10.18 Low and Medium Alloy Steel for Sour Services 207

10.19 Low and Medium Alloy Steel for Toxic and Benzene (<95% wt) Service Line Classes 218

10.20 Steel for High Temperature Service Line Classes 220

10.21 Stainless Steel for Process Service Line Classes 223

10.22 Stainless Steel for Sour Service Line Classes 262

10.23 Stainless Steel for Caustic Services Line Classes 280

10.24 Stainless Steel for Sulphiric Acid Services Line Classes 286

10.25 Stainless Steel Alloys for Hydrogen Services 294

10.26 Stainless Steel for Toxic and Benzene (<95% wt) Services Line Classes 312

10.27 Specialty Alloys for Process Service Line Classes 314

10.28 Specially Alloys for Caustic Service Line Classes 321





of 403

10.29 Specialty Alloy Steel for Sulfuric Acid Services Line Classes 325

10.30 Specialty Alloys For Ammonium Bisulfide Service Line Classes 332

10.31 Specialty Alloys For Chlorination Service Line Classes 336

10.32 Couper Nickle and others for Water Services Line Classes 338

10.33 Non-Metallic Line Classes 346

10.34 Internally Lined Carbon Steel Line Classes 355

10.35 Carbon Steel for Benzene (≥ 95%) Service Line Classes 362

10.36 Category M (Lethal) Service Line Classes 367

10.37 Impact Tested Carbon Steel for Hydrogen Services 371

Appendixes

A Line Class Designator Field Definition Tables 375

B Fluid Identification Codes 37/

C Piping Line Class Summary Tables 379





of 403

1 Scope 1.1 This standard provides the basic Piping Line Class from aspects of specification and

designation. The preamble section of this standard must be attached to the relevant selected piping class(es) for the specific project.

1.2 This standard covers the minimum mandatory requirements for the material specifications for piping, valves, and fittings for new piping for use in general, refining, petrochemical, pipelines, and utility services, whose design is in accordance with the applicable ASME B31.1, B31.3, B31.4, or B31.8 Codes.

2 Conflicts, Deviations and Clarifications

2.1 Any conflicts between this standard and other applicable Company Engineering Standards (JERES), Material Specifications (JERMS), Standard Drawings (JERSD), Engineering Procedures (JEREP), Company Forms or Industry standards, specifications, Codes and forms shall be brought to the attention of Company Representative by the Contractor for resolution.

Until the resolution is officially made by the Company Representative, the most stringent requirement shall govern.

2.2 Where a licensor specification is more stringent than those of this standard, the Licensor’s specific requirement shall apply.

2.3 Where applicable Codes or Standards are not called by this standard or its requirements are not clear, it shall be brought to attention of Company Representative by Contractor for resolution.

2.4 Direct all requests for deviations or clarifications in writing to the Company or its Representative who shall follow internal Company procedure and provide final resolution.

3 References

The selection of material and equipment, and the design, construction, maintenance, and repair of equipment and facilities covered by this standard shall comply with the latest edition of the references listed below as of the CUT-OFF DATE as specified in the Contract unless otherwise noted.

3.3 Company References

JERES-A-301 Materials in Wet H2S Services

JERES-B-017 Fire Water System Design





of 403

JERES-C-102 Basic Process, Process Safety and Environmental Design Requirements and Criteria

JERES-C-103 Standard Specifications for PID Preparation

JERES-L-100 Applicable Codes and Standards for Process Piping System

JERES-L-108 Selection of Valves

JERES-L-109 Selection of Piping Flanges, Stud Bolts and Gaskets

JERES-L-110 Limitations on Pipe Joints and Components

JERES-L-130 Materials ForLow Temperature Services

JERES-L-131 Fracture Control of Carbon Steel Line Pipe

JERES-L-132 Velocity Criteria and Basic Material Selection for Process Piping

JERES-L-133 Corrosion Protection Requirements for Pipelines/Piping and Process Equipment

JERES-L-136 Selection and Restrictions of Carbon Steel Pipe

JERES-L-310 Design of Plant Piping

JERES-L-410 Design of Pipelines

JERES-L-610 Nonmetallic Piping

JERES-S-010 Sanitary Sewers

JERES-S-020 Industrial Drainage and Sewers

JERES-S-050 Sprinkler and Standpipe System Components Buildings

JERES-S-060 Plumbing Code

JERES-W-011 Welding Requirements for On-Plot Piping

JERES-W-012 Welding Requirements for Pipelines

Company Material Specifications

JERMS-H-9005 Shop Applied, Internal Cement Mortar Lining of Steel Pipe

JERMS-H-9091 Qualification Requirements for Shop-Applied Internal FBE Coatings

JERMS-H-9107 Application of Fluoropolymer Coatings to Fasteners

JERMS-H-9115 Hot-Dip Galvanizing for Structural Steel and pipes

JERMS-L-1016 Qualification of Pipeline, In –Plant and pressure Vessel Steels for Resistance to Hydrogen-Induced Craking





of 403

JERMS-L-1029 RTR (Fiberglass) Sewer Pipe and Fittings for Gravity Flow

JERMS-L-1035 API Line Pipe

JERMS-L-1038 Small Direct Charge Purchases of Pipe

JERMS-L-1332 High Frequency Welded Line Pipe, Class B

JERMS-L-1333 High Frequency Welded Line Pipe, Class C

JERMS-L-2001 Piping Components for Low Temperature Service

JERMS-L-2005 Butt Welding Pipe Fittings

JERMS-L-2011 Forged Steel Weld Neck Flanges for Low, Intermediate and High Temperature Service

JERMS-L-4001 Gate Valves

JERMS-L-4002 Globe Valves

JERMS-L-4003 Additional Requirements for Low Temp. Valves

JERMS-L-4005 Check Valves, Swing Type

JERMS-L-4035 General Requirements for Valves

JERMS-L-4041 Expanding Plug Valves

JERMS-L-4047 High Performance Butterfly Valves

JERMS-L-4050 Gate Valves, Through Conduit Type, API SPEC 6D

JERMS-L-4051 Ball Valves, API 6D

JERMS-L-4053 Steel Lubricated Plug Valves

Company Standard Drawings

JERSD-L-0001 Details of carbon steel Welding Boss, Threaded Connections

JERSD-L-0003 Carbon steel WN & Blind Flanges, Large Sizes-Class 300 RJ

JERSD-L-0008 Spectacle Plates, Blinds and Spacers for Class 125 Cast Iron Flanges

JERSD-L-0009 Spectacle Plates, Blinds and Spacers for carbon steel Class 150 Raised Face Flanges

JERSD-L-0011 Spectacle Plates, Blinds and Spacers for carbon steel Class 600 Raised Face Flanges

JERSD-L-0016 Reinforcement of welded Branch Connections





of 403

JERSD-L-0017 Spectacle Plates, Blinds and Spacers for Class 250 Raised Face C/I and carbon steel Class 300 RF Flanges

JERSD-L-0018 Spectacle Plates, Blinds and Spacers for carbon steel Class 900 Octogonal Ring Joint Flanges

JERSD-L-0019 Spectacle Plates, Blinds and Spacers for carbon steel Class 1500 Octogonal Ring Joint Flanges

JERSD-L-0021 External Welding Sleeve for Cement Lined Pipe

JERSD-L-0026 Isolating Assembly for Ring Joint Flanges

JERSD-L-0027 Details of carbon steel Welding Boss, Socket-Weld Connections

3.4 Industry Codes and Standards

American Petroleum Institute

API 5L Specification for Line Pipe

API 590 Steel Line Blanks

API 599 Steel and Ductile Iron Plug Valves

API 600 Steel Gate Valves-Flanged and Butt-Welding Ends

API 602 Compact Steel Gate Valves-Flanged, Threaded, Welding, and Extended-Body Ends

API 607 Fire Test for Soft-Seated Quarter-Turn Valves

API 941 Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants

American Society of Mechanical Engineers

ASME B31.1 Power Piping

ASME B31.3 Process Piping

ASME B31.4 Liquid Transportation Systems for Hydrocarbons, Liquid Petroleum Gas, Anhydrous Ammonia, and Alcohols

ASME B31.8 Gas Transmission and Distribution Piping Systems

ASME B16.1 Cast Iron Pipe Flanges and Flanged Fittings

ASME B16.3 Malleable Iron Threaded Fittings

ASME B16.5 Pipe Flanges and Flanged Fittings

ASME B16.9 Factory-Made Wrought Steel Buttwelding Fittings





of 403

ASME B16.11 Forged Steel Fittings, Socket-Welding and Threaded

ASME B16.12 Cast Iron Threaded Drainage Fittings

ASME B16.21 Nonmetallic Gaskets for Pipe Flanges

ASME B16.22 Wrought Copper and Copper Alloy Solder Joint Pressure Fittings

ASME B16.28 Wrought Steel Buttwelding Short Radius Elbows and Returns

ASME B16.34 Steel Valves

ASME B16.39 Malleable Iron Threaded Pipe Unions

ASME B16.42 Ductile Iron Pipe Flanges and Flanged Fittings

ASME B16.47 Large Diameter Flanges

American Society for Testing and Materials

ASTM A36 Structural Steel

ASTM A53 Pipe, Steel, Black and Hot-Dipped, Zinc Coated, Welded and Seamless

ASTM A74 Cast Iron Soil Pipe and Fittings

ASTM A105 Forgings, Carbon Steel, for Piping Components

ASTM A106 Seamless Carbon Steel Pipe for High Temperature Service

ASTM A126 Gray Iron Castings for Valves, Flanges, and Pipe Fittings

ASTM A182 Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves, and Parts for High Temperature Service

ASTM A193 Alloy-Steel and Stainless Steel Bolting Materials for High Temperature Service

ASTM A194 Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High Temperature Service

ASTM A216 Steel Casting, Carbon, Suitable for Fusion Welding for High Temperature Service

ASTM A217 Steel Casting, Martensitic Stainless and Alloy, for Pressure-Containing Parts Suitable for High Temperature Service

ASTM A234 Pipe Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures

ASTM A240 Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels





of 403

ASTM A269 Seamless and Welded Austenitic Stainless Steel Tubing for General Service

ASTM A307 Carbon Steel Bolts and Studs, 60,000 psi Tensile

ASTM A312 Seamless and Welded Austenitic Stainless Steel Pipe

ASTM A335 Seamless Ferritic Alloy Steel for High-Temperature Service

ASTM A350 Forgings, Carbon and Low-Alloy Steel Requiring Notch Toughness Testing for Piping Components

ASTM A351 Steel Castings, Austenitic, for High-Temperature Service

ASTM A395 Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

ASTM A403 Wrought Austenitic Stainless Steel Piping Fittings

ASTM A494 Castings, Nickel and Nickel Alloy

ASTM A563 Carbon and Alloy Steel Nuts

ASTM A789/A789M Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

ASTM A790/A790M Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

ASTM B61 Steam or Valve Bronze Castings

ASTM B62 Composition Bronze or Ounce Metal Castings

ASTM B88 Seamless Copper Water Tube

ASTM B165 Nickel-Copper Alloy Seamless Pipe and Tube

ASTM B169 Aluminum-Bronze Plate, Sheet, Strip, and Rolled Bar (UNS C61400)

ASTM B366 Factory-Made Wrought Nickel-Alloy Welding Fittings

ASTM B407 Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

ASTM B409 Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

ASTM B462 Forged or Rolled UNS N08020, UNS N08024, UNS N08026, and UNS N08367 Alloy Pipe Fittings, and Valves and Parts for Corrosive High-Temperature Service

ASTM B463 Forged or Rolled UNS N08020, UNS N08024, UNS N08026 Alloy Plate, Sheet, and Strip

ASTM B464 Welded Chromium-Nickel-Iron-Molybdenum-Copper-Columbium Stabilized Alloy (UNS N08020)Pipe





of 403

ASTM B466 Seamless Copper-Nickel Pipe and Tube (UNS C706(10)

ASTM B467 Welded Copper-Nickel Pipe (UNS C71500)

ASTM B474 Electric Fusion Welded UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Pipe

ASTM B530 Method for Measurement of Coating Thicknesses by Magnetic Method, Electrodeposited Nickel Coatings on Magnetic and Non-Magnetic Substrates

ASTM B564 Nickel Alloy Forgings

ASTM D1784 Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Viny Chloride) (CPVC) Compounds

ASTM D1785 Poly(Vinyl Chloride (PVC) Plastic Pipe, Schedules 40, 80, and 120

ASTM D2467 Socket-Type Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

ASTM D2564 Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

ASTM D2665 Practice for Operating Xenon Arc-Type Light Exposure Apparatus With and Without Water for Exposure of Plastics

ASTM D3034 Type PSM Poly(Vinyl Chloride)(PVC) Sewer Pipe and Fittings

ASTM D3311 Drain, Waste, and Vent (DWV) Plastic Fittings Patterns

ASTM F437 Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

ASTM F439 Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings

ASTM F441 Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

ASTM F493 Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

Chlorine Institute

Chlorine Institute Pamphlet 6

Manufacturers Standardization Society

MSS SP-83 Steel Pipe Unions, Socket-Welding and Threaded





of 403

National Association of Corrosion Engineers

NACE MR0103 Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments – 2005 edition.

4 Definitions

4.1 Definitions presented in this Standard and other JER documents have precedence over other definitions. Conflicts between various definitions shall be brought to the attention of Company Representative by the Contractor for resolution.

Company: Jubail Export Refinery.

Company Representative: A designated person from the Company or an assigned third party representative.

Company Inspector: A designated person or an agency responsible for conducting inspection activities on behalf of the Company.

4.2 List of Definitions

Amine Services: All amine solutions including: MDEA, DEA, MEA, DGA, ADIP and similar.

Caustic Services: All sodium hydroxide solutions.

General Services: Includes piping classes required for GOSP’s, WIP’s, gas plants, pump stations, water treatment, and water injection plants and refers to both normal fluid services and Category D fluid service as defined in B31.3.

Hazardous Air Pollutant Service: a service containing a Hazardous Air Pollutant as defined in JERES-C-102.

Hydrocarbon Services: Process streams of liquid or gaseous hydrocarbon materials, including two and three phase hydrocarbon materials.

Hydrogen Services: Process streams containing relatively pure hydrogen and component streams containing hydrogen with a partial pressure of 350 Kpa (abs) and higher.

NPS: This means Nominal Pipe Size.

Sour-Wet Services: For definition, refer to JERES-A-301.





of 403

Steam Services: All steam and condensate at operating pressures above 100 kPag.

Toxic service: a service containing a potentially toxic material as defined in JERES-C-102.

4.3 Abbreviations

4.3.1 The following abbreviations are used in this standard for valve descriptions;-

BB Bolted Bonnet

BC Bolted Cover

ISNRS Inside Screw Non-Rising Stem

ISRS Inside Screw Rising Stem

OS&Y Outside Screw and Yoke

PSB Pressure Seal Bonnet

PSC Pressure Seal Cover

BST Bellow Seal Type

WB Welded Bonnet

WC Welded Cover

TRIM Stem, body seating surface, disc and gate seating surface, Backseat, ball, plug, etc., and all other parts in contact with line fluid. Refer to Table 1 for trim designation numbers. Whenever “full” is used, it means that all parts shall be made from the material specified and not just the surface mating material

HF Hard Faced (Stellite No. 6)

Table 1 – Simplified Trim Number Designations

TRIM NO. BODY SEAT

SURFACE MATERIAL CLOSURE MEMBER

SURFACE MATERIAL 1 13 CR 13 CR

2 SS 304 SS 304

3 SS 310 SS 310





of 403

4 13 CR Hardened 13 CR Hardened

5 Stellite 6 hardfacing Stellite 6 hardfacing

5A NI-CR hardfacing NI-CR hardfacing

6 13 CR CU-NI

7 13 CR hardened 13 CR

8 Stellite 6 hardfacing 13 CR

8A NI-CR hardfacing 13 CR

9 Monel Monel

10 SS 316 SS 316

11 Monel NI-CR or Stellite 6 hardfacing

12 SS 316 NI-CR or Stellite 6 hardfacing

13 Alloy 20 Alloy 20

14 Alloy 20 NI-CR or Stellite 6 hardfacing

Notes for Table-1:

− This table is a simplified version of Table 3 in API 600. It’s only purpose is to aid in understanding the trim number designations listed in the Piping Material Classes

− Trim selection are governed by JERES-L-108 and the applicable JERMS

− When a combination trim is shown (Trim No.’s 6, 7, 8, 8A, 11, 12, or 1(4), the seating surface materials of the seat and closure member may be interchanged

4.3.2 The abbreviations list for fluid service identification are presented in Appendix-B.

5 Piping Line Class Designator System

5.1 The base piping line class designator system consists of five alpha-numeric fields containing one to three characters each. Each field describes various features of the piping line class. The total number of characters in these fields is eight.

Commentary Notes:

The system is based on Process Industry Practices (PIP) to provide a uniform standard consistent with industry practices and specific Company requirements.

5.2 The fifth Exceptions, modification, or additions may be made to the base specification, by adding a numeric or alphabatic single character after the fourth field to indicate the changes made. Refer to paragraph 5.6 for more details.

5.3 Field Definitions and Examples

The following system establishes procedures used for identifying line classes.





of 403

Table-1: Piping Line Class Field Definition

Field Location

First Second Third Forth Fifth

Representation Flange Face & rating

Basic Material Corrosion Allowance

Main Service Type

Refer to Table-2

Character Type

Numeric Alphabetic Numeric Alphabetic Alphabetic or Numeric

Number of Characters

Triple Double Single Single Single

Example 103 CH 2 S M

Explanation 1: Raised Face 03: 300# rating

HIC resistant carbon steel

3 mm corrosion allowance

Wet H2S sour service

Category M service

5.3.1 First Field

The first field is a three digit numeric character. It defines the flange facing and rating as follows: the first digit (from left) is for flange facing and second two digits represent the pressure rating. The details are in the Appendix A – paragraph A.1.

5.3.2 Second Field

The second field defines the basic pipe material and consists of two alpha characters. For details refer to the Appendix A – Table A.2.

5.3.3 Third Field

The third field defines the corrosion or erosion allowance and consists of one numeric character. For details refer to the Appendix A – Table A.3.

5.3.4 Fourth Field

The fourth field defines the service and consists of one alpha character. Refer to the Appendix A– Table A-4.

5.3.5 Fifth Field

The fifth field is not usually used except for the specific cases listed in following Table:





of 403

Table-2: Line Class Fifth Field Definition

Fifth Field Location

Condition Numeric Alphabetic

Specialty Valves 1

Pipelines to ASME B31.4 4

Pipelines to ASME B31.8 8

High Concentration (>95% wt) Benzene service

B

Buried Plant Piping G

Category M (lethal) Service M

5.4 Fields List

The complete list of all fields used in generated line class designators are complied in Appendix-A. These designators shall be used to maximum, and in any case where classes or materials are not available Company shall be consulted to create new ones.

5.5 Line Class Example

The piping line class example presented in Table-1 of paragraph 5.3.1 is "103CS1P". This designator specifies an ASME pressure raised face class 300 flanges, with carbon steel piping system with 1.5 mm corrosion allowance designed for general process service with no changes to the base piping line class material specification.

5.6 Modification Suffix (Fifth field)

A base individual line class material specification may have modifications/additions by adding a numeric or alphabatic character to the base line class designator as outlined in Table-2 of paragraph 5.3.5.

Example: line class 101CS1P1 is based on 101CS1P. The modification in this case is 101CS1P1 that foresees 316 ss valve trim (instead of 13 Cr as 101CS1P).

A base individual line class can have more than one modification/addition, e.g. 106CS0P4 is based on 106CS1P and means the piping system is designed as transportation pipeline in accordance with ASME B31.4 with zero corrosion allowance.





of 403

5.7 Company Fluid Service Codes

Company service codes are listed in Table A-4 of Appendix A and shall be included in conjunction with the line class designators on the P&ID's and other drawings.

Example: 6"-FG-123-101CS1P is a 6-inch fuel gas line number 123 and material specification 101CS1P.

5.8 Piping Line Class Summary

The entire piping line classes are summarized in Appendix C. The following table is an extract representation of this Piping Line Class Summary

PIPING CLASS

RATING FACING GASKET BOLTING

BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

101CA1P

150 RF

Spiral W. SS316 Graphite A320 L7 / A194 Gr. 4

Low Temperature Carbon Steel

1.5 SS 316 -45

340

18.4 Process

103CA1P

300 RF



1.5 SS 316 -45

340

48.0 Process

101CS1P

150 RF

Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H

Carbon Steel 1.5 13 Cr -29

425

19.6 Process

101CS2P

150 RF


Carbon Steel 3 13 Cr -29

425

19.6 Process

101CS4P

150 RF


Carbon Steel 6 13 Cr -29

425

19.6 Process

6 Design Requirements

6.1 General

6.1.1 All piping shall be designed in accordance with the applicable ASME B31 Code as specified in the individual line classes as supplemented by: JERES-L-100, JERES-L-310, JERES-L-410, and JERES-L-610.

6.1.2 Void.





of 403

6.1.3 Feedwater piping upstream and steam piping downstream of ASME Section I shall be designed in accordance with ASME B31.3. Boiler utility P&ID's shall show these Code breaks.

6.2 Corrosion Allowance

6.2.1 The individual piping classes specify the amount of corrosion allowance included in the pipe wall and fitting schedules.

6.2.2 Where services require additional corrosion allowance they shall be determined based on the criteria specified in JERES-L-133.

6.3 Void.

6.4 Pipe

6.4.1 Limitations on pipe sizes per the applicable JERES-L-310 or JERES-L-410 shall apply.

The minimum pipe size shall be 3/4 " NPS (Nominal Pipe Size) except tubing and piping used in Category D Fluid, individual instrument leads, pump and compressor auxiliary piping, steam tracing, and for reduction at instruments or other equipment having connections smaller than 1/4" NPS.

6.4.2 Pipe sizes: 1¼", 2½", 3½" and 5" shall not be used except for connections to equipment requiring these sizes. In these cases a suitable transition shall be made as close as possible to the equipment.

6.4.3 Carbon steel piping materials classes specify low yield strength materials, such as grade B, X42 or equivalent.

For transportation pipelines designed in accordance of ASME B31.4 or ASME B31.8 higher grade carbon steel can be used but not higher than X-65.

For repairs and maintenance when low yield strength materials are not available, high yield strength materials: X42 through X60, as listed in ASME B31.3 may be substituted.

6.4.4 Seamless or submerged-arc straight seam-welded pipes shall be used within plant limits (within the fenced area of the plant) for piping designed to the ASME B31.3 code.

6.4.5 Electrical Resistance Welded (ERW) and high frequency induction welded pipe in addition to seamless and welded pipe with straight or spiral seam are permitted outside process plant limits for piping designed to ASME B31.4 and B31.8 codes. This is subject to prior approval per Section 2 of this standard.





of 403

6.5 Joints, Flanges, and Fittings

6.5.1 The type of joints, flanges, and fittings shall be in accordance with the individual piping classes.

6.5.2 Locknuts, street elbows (one end with female threads and the other end with male threads), street tees and reducing elbows are not permitted.

6.5.3 Forged welding outlets conforming to ASME B16.11 fitting pressure class 3000 or 6000 may be used in lieu of JERSD-L-0001 or JERSD-L-0027.

6.5.4 Plugs shall be round headed type.

6.6 Flange Stud Bolts and Nuts

6.6.1 Stud bolts and nuts shall be purchased in accordance with the specific ASTM number per individual piping class.

6.6.2 For near-shore and underground piping, ASTM A193-B7/ASTM A194-2H with ceramic-fluoropolymer coating per JERMS-H-9107 or DURABOLT (by Saudi Conduit Coating Company; Al Khobar, KSA) or equivalent shall be used.

6.6.3 If DURABOLT is not available, the following alternatives may be used:

a) corrosion-resistant alloys,

b) painting the exposed portions of the bolts and sealing the gap between flange faces,

c) encapsulating the bolted flange connection with heat shrinkable tubing.

6.7 Insulating Gaskets/Kits

6.7.1 For dissimilar metals connections; examples: a stainless steel flange to carbon steel flange, or a Cu-Ni flange to carbon steel flange, the potential for galvanic corrosion shall be determined in consultation with the Company Representative.

6.7.2 Where potential galvanic corrosion exists, the types of joints are restricted as follows:

1) For flanged joints of dissimilar metals, insulating gaskets, stud bolt sleeves and washers such as PIKOTEK, or approved equal.

(2) For non-flanged mechanical joints of dissimilar metals, a dielectric union.

(3) Welded joints of dissimilar metals are not permitted.





of 403

6.7.3 Where potential galvanic corrosion does not exist, standard joints and welds are acceptable, except that welded joints have some additional restrictions as specified in JERES-W-011 and JERES-W-012.

6.8 Flange Gaskets

6.8.1 The type of gasket shall be selected based on the requirements of JERES-L-109 and this standard.

6.8.2 Spiral-wound gaskets shall be specified with inner rings as required by JERES-L-109.

6.9 Valves

The types of valves and valve trims to be used are to be in accordance with the individual line classes based on the service conditions and the limitations detailed in JERES-L-108.

Prohebitions and limitations imposed by JERES-L-108 shall supersede valves slection provided by an individual class.

Commentary Note:

Line classes are developed to cover wide range of application.

6.10 Branch Connection

Branch connections for new construction of metallic piping shall be made in accordance with JERES-L-110.

7 Materials Limitation

7.1 General

7.1.1 The piping material specifications (line classes) in this standard are the basic material descriptions for: pipe, valves and fittings which have been selected for specific services.

7.1.2 Alternative carbon steel materials are acceptable provided they meet the requirements of JERES-L-132.

7.1.3 Materials containing asbestos are prohibited.

7.1.4 Materials for piping, fittings and valves in hydrogen service shall be selected in accordance with API 941 and within the maximum temperatures specified per individual line class.





of 403

7.1.5 Use of Duplex stainless steel shall be limited to water service, containing a maximum of 2 kPa partial pressure H2S.

7.2 Impact Testing (pipe and fittings)

7.2.1 The requirements for impact testing are to be based on application of materials and in accordance with ASME B31.3, paragraph 323.3.

7.2.2 Impact test may be required per ASME B31.3 Fig. 323.2.2, Curve B for A106 and API Grade B and API 5L X-grade pipe materials normalized or quenched and tempered, having a wall thickness greater than 15 mm at design temperature at minus 29°C and lower.

7.3 Postweld Heat Treatment (pipe and fittings)

7.3.1 Postweld heat treatment (PWHT) shall be specified when required by the applicable Code or for service conditions per this standard.

7.3.2 For carbon steel piping, the following services require PWHT. Other process conditions may also require PWHT as determined during project design or as specified by Company Representative.

(1) All caustic soda solutions at all temperatures.

(2) All monethanolamine (MEA) solutions at all temperatures.

(3) All diglycol amine (DGA) solutions above 140°C design temperature.

(4) All rich amino diisopropanol (ADIP) solutions above 90°C design temperature.

(5) All lean ADIP solutions above 60°C design temperature.

7.4 Flanges (loose)

Materials for forged carbon steel weld neck flanges for use from minus 50 to plus 425°C shall conform and be purchased to the requirements of this standard and JERMS-L-2011.

7.5 Low-Temperature Components (pipe and fittings)

The materials and purchasing requirements of carbon steel piping components for low-temperature services shall conform to the requirements of this standard and JERMS-L-2001.





of 403

7.6 Pipe

The materials and purchasing requirements of API 5L and carbon steel ASTM pipe materials both welded and seamless shall conform to the requirements of this standard and the following JERMS's:

(1) JERMS-L-1016 for pipe in wet H2S services as required by A-301.

(2) JERMS-L-1035 for API Line Pipe (large orders).

(3) JERMS-L-1038 or JERMS-L-1035 for plant piping.

(4) JERES-L-130, for services with minimum design temperatures between – 29°C and -45°C.

(5) JERMS-L-1332, for API 5L ERW pipe.

7.7 Buttweld Fittings

The materials and purchasing requirements of carbon steel buttweld fittings to: ASTM A234 Grade WPB and MSS SP-75 shall conform to the requirements of this standard and JERMS-L-2005.

7.8 Valves

All valves shall be specified in accordance with the generic descriptions detailed in the individual line classes and the additional requirements of the JERMS-L-4000 series as applicable.

7.9 Requirements for sour service (valves)

When a particular service is wet sour, requirements of JERES-A-301 shall apply.

8 Material Procurement

8.1 Piping materials shall be procured from Company approved manufacturers.

9 Specific Rules for Piping Line Class Tables

9.1 The tables of piping line classes presented in Section 10 provide detailed description of each piping line class dedicated for a specific service.

9.2 Piping classes listed in Section 10 are based on above ground and assume that the applicable code is ASME B31.3 for the majority and few are for ASME B31.1.





of 403

9.3 Piping Line Class for Pipelines

9.3.1 Transportation piping systems shall use the ASME B31.4 or ASME B31.8 as applicable.

9.3.2 The applicable piping line class shall be selected from Section 10 with the proper material and service group applicable to the service fluid which will be carried by the pipeline with following general rules:

− the corrosion allowance is usually zero for pipelines,

− the common material is basic carbon steel with grades ranging from grade B to X-65,

− pipe wall shall be optimized and cost effectively calculated as stipulated in JERES-L-410

− The allowable stress are based on the applicable ASME B31.4 or ASME B31.8 in addition to reqiurments of JERES-L-410

9.4 Piping Class for Underground Plant Piping

9.4.1 The underground piping within the plant area shall use the same above ground piping line class with a fifth modifier G.

9.4.2 The fifth modifier G indicates the following:

− the pipe is buried,

− the piping is externally coated with appropriate coating system capable to withstand anticipated temperatures,

− flanged connections are minimized

9.5 Gravity Sewer Piping

For gravity sewer the appropriate piping class from material point of view shall be used with following consideration:

− the pipe is usually buried,

− a fifth modifier of G shall be used at the end of the class,

− the applicable design standards are JERES-S-020





of 403

9.6 Category M (Lethal) Service

In case of Lethal service application, the following requirements shall be applied to the prescriptions of the line classes provided:

− All block valves shall satisfy the following:

a) Tightness class: “A” according to ISO-15848, part I, table 1. Test fluid shall be helium (class AH)

b) Endurance class: CO2 (1500 cycles)

c) Temperature class: 400°C according to ISO-15848, part I, table 3.

− Minimize the number of flanges.

− The surface roughness of flange face shall be < 3.2 μm

− Shop and field welds shall be 100% radiography. Threaded connections shall be avoided.

9.7 Fire Water Service

9.7.1 For fire water piping system, the following piping classes with the limitation inmposed shall apply:

a) 301FE0W: Shall be used for main underground piping distribution systems.

b) 301LE0W: For above ground, internally coated line is allowed for distribution systems that will be not exposed to fire.

c) 301BD0W: to be used for take-off connections, small diameter piping distribution, etc.

d) 301CG0W: Can be used for dry-wet fire water piping system. Pipe size is limited to 8 inches maximum.

e) Higher alloy material suitable for water service (other than 301LE0W) such 103SP1P can be used for small diameter piping systems.

9.7.2 Fire hydrants are considered specialty commodity and shall comply with details of JERES-B-017 for design and material.





of 403

10 Piping Line Classes

The following tables provide detailed description of each assigned piping line class.

10.1 Impact Tested Carbon Steel Line Classes

10.1.1 Line Classes Notes

The following Notes shall apply to all of the impact tested carbon steel classes family (101CA1P) and shall be considered as an integral part of the individual line class.

Notes:

(1) Corrosion Allowance:

When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.

(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.

(3) Electric welding process, double-welded, full-penetration straight seam welds.

(4) Seal Welding

Refer to JERES-L-110 for seal welding requirement of threaded connections.

(5) Fittings Thickness

Schedule of fittings and weldneck flanges to be same as pipe.

(6) Valves Non-Metallic Components:

Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.

(7) Flanges

Refer to JERES-L-109 for flange material selection.

(8) Void.





of 403

10.1.2 Line Class: 101CA1P Line Class: 101CA1P Basic Material: Low Temp CS Max. Temperature: 340°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code

Temperature (°C) (2) -45 100 200 300 340 Pressure Rating (bar) (2) 18.4 17.4 13.8 10.2 8.8

Item Size Rating Schedule Type Specification Notes

Up to 3/4" S-160 1" to 2" S-80 3" to 10” S-40 12” to 18” S-20

Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C PIPE

20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2

(1) (2) (3)

1½" and under Class acc. B16.11 Socketweld/ Threaded A350 Gr. LF2 CL. 1, B16.11 (5) FITTINGS

El's Tees,

Reducers, Caps, Couplings etc.

2" and above Buttweld A420 Gr. WPL6, B16.9 (5)

Nipples and Swages 1½" and under Seamless A333 Gr. 6 or

API 5L Gr. B + Impact Test at -45°C

Sockolets/ Threadolets 1½" and under Class acc. To MSS

SP 97 Socketweld/

Threaded A350 Gr. LF2 CL. 1,

MSS SP 97 (4)

Weldolets 2" and above Buttweld A350 Gr. LF2 CL. 1 MSS SP 97

1½" and under Class 150 Socketweld RF (7) FLANGES

2" and above Class 150 Weldneck RF A350 Gr. LF2 CL. 1, B16.5

(7) BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.

1½" and under Class 800 Socketweld/ Threaded

A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12

(6)

GATE VALVES

2" and above Class 150 RF Flanged A352-LCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(6)


A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12 (6)

GLOBE VALVES 2" and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite

packing, Trim No. 12 (6)


A350 Gr. LF2 CL. 1 body, BC, Trim No. 10 (6) CHECK VALVES

2" and above Class 150 RF Flanged A352-LCB body, BC, Trim No. 10 (6)

1½" and under Class 300 Socketweld with nipples

A350 Gr. LF2 CL. 1 body, floating ball, fire safe, RTFE seats, Trim No. 10

(6)

2" to 4" Class 150 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) BALL VALVES

6" and above Class 150 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D, Trim 316 (6)

Notes: Notes (1) through (8) of 10.1.1 are applicable.





of 403




Up to 3/4" S-160 1" to 2" S-80 3" to 10” S-40 12” to 18” S-20



(1) (2) (3)


El's Tees,



Nipples and Swages 1½" and under Seamless A333 Gr. 6 or



SP 97 Socketweld/


MSS SP 97 (4)







(6)

GATE VALVES


(6)






A350 Gr. LF2 CL. 1 body, BC, Trim No. 10 (6) CHECK VALVES



A350 Gr. LF2 CL. 1 body, floating ball, fire safe, RTFE seats, Trim No. 10

(6)








of 403





Up to 3/4" S-160 1" to 2" S-80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS



(1) (2) (3)


El's Tees,



Nipples and Swages 2" and under Seamless A333 Gr. 6 or



SP 97 Socketweld/


MSS SP 97 (4)







(6)

GATE VALVES


(6)






A350 Gr. LF2 CL. 1 body, BC, Trim No. 10

(6) CHECK VALVES



A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, fire s.Trim No. 10 (6)







of 403





¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40



(1) (2) (3)


El's Tees,






SP 97 Socketweld/


MSS SP 97 (4)







(6)

GATE VALVES


(6)







(6) CHECK VALVES










of 403

10.1.6 Line Class: 106CA1P

Line Class: 106CA1P Basic Material: Low Temp CS Max. Temperature: 340°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code



¾" S-160 1" to 2" S-80

3" S-40 4” to 18” S-80

Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C

(1) (2) (3) PIPE


1½" and under Class acc. to B16.11 Socketweld/ Threaded A350 Gr. LF2 CL. 1, B16.11 (5) FITTINGS

El's Tees, Reducers, Caps,

Couplings etc. 2" and above Buttweld A420 Gr. WPL6, B16.9 (5)




SP 97 Socketweld/


MSS SP 97 (4)







(6)

GATE VALVES


(6)







(6) CHECK VALVES




2" to 4" Class 600 RF Flanged A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, fire s.Trim No. 10 (6) BALL VALVES

6" and above Class 600 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6)






of 403

10.2 Basic Carbon Steel Line Classes


The following Notes shall apply to all of the carbon steel classes family (101CS1P) and shall be considered as an integral part of the individual line class.

Notes:




(3) Electric welding process, double-welded, full-penetration welds.

(4) Seal Welding



Schedule of fittings and weldneck flanges shall be same as the pipe.



(7) Valve Trim

Refer to the applicable JERMS and JERES-L-108 for trim selection.

(8) Flanges


(9) Butterfly valves API 609 Category A may be used for utility/water service applications

(10) Void.





of 403

10.2.2 Line Class: 101CS1P Line Class: 101CS1P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code

Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5



¾" Sch160 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20

Seamless A106 Gr. B or API 5L Gr. B PIPE

20” and above calculate Welded API 5L Gr. B

(1) (2) (3)

1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5) FITTINGS


Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)

Nipples and Swages 2" and under Seamless A106 Gr. B or

API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)

Weldolets 2" and above Buttweld A 105N MSS SP 97

1½" and under Class 150 Socketweld RF FLANGES

2" and above Class 150 Weldneck RF A105N, B16.5

(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.


A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8 (6)

GATE VALVES 2" and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite

packing, API 600, Trim No. 8 (6)


A105N body, BB, OS&Y, graphite packing, Trim No. 8 (6)

GLOBE VALVES 2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y,

graphite packing, Trim No. 8 (6)

1½" and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 1

(6) CHECK VALVES 2" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 1 (6)


A105N body, floating ball, RTFE seats, Trim No. 10, fire safe

(6) (7)

2" to 4" Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10

(6) (7) BALL VALVES

6" and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim ENP

(6) (7)


A105N body, lubricated, inverted pressure balanced, BC, Trim ENP (6)

PLUG VALVES 2" and above Class 150 RF Flanged

A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim ENP

(6)

BUTTERFLY VALVES 4" and above Class 150 Lugged or RF

Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP





of 403

10.2.3 Line Class: 101CS2P

Line Class: 101CS2P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size Rating

Schedule Type Specification Notes

¾" S-XXS 1” to 2” S-160 3" to 4” S-80

6" to 10” S-40 12" to 18” S-20

Seamless A106 Gr. B or API 5L Gr. B

(1) (2) PIPE

20” and above calculate Welded API 5L Gr. B (3)





API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)






A105N body, BB, OS&Y, graphite packing, API 602, Trim No. 8 (6)





GLOBE VALVES 2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y,


1½" and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 1 (6)

CHECK VALVES 2" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 1 (6)


A105N body, floating ball, RTFE seats,Trim No. 10, fire safe

(6) (7)


(6) (7) BALL VALVES

6" and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim ENP

(6) (7)


A105N body, lubricated, inverted pressure balanced, BC, Trim ENP (6)



(6)








of 403




Up to 2" S-XXS 3" S-160 4" S-120 6” S-80

8” to 10” S-60 12” to 16” S-40

18” S-30


(1) (2) PIPE

20” and above Calculate Welded API 5L Gr B (3) FITTINGS El's Tees,

Reducers, Caps, etc.

1" and above

Buttweld A234-Gr. WPB, B16.9 (5)

Weldolets 1” and above Buttweld A 105N MSS SP 97

FLANGES 1” and above Class 150 Weldneck RF A105N, B16.5 (8)

BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.

2" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8

(6) GATE VALVES

2½" and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 8 (6)

2" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 8

(6) GLOBE VALVES

2½" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8 (6)

2" and under Class 150 RF Flanged A105N body, BC, Trim No. 1

(6)

CHECK VALVES 2½" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 1 (6)

2" and under Class 150 RF Flanged A105N body, floating ball, RTFE seats, Trim No. 10

(6) (7)


(6) (7) BALL VALVES


(6) (7)

1½" and under Class 150 RF Flanged A105N body, lubricated, inverted pressure balanced, BC, Trim ENP (6)



(6)



Notes: In addition to the notes (1) through (10) of 10.2.1





of 403


Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8


¾” Sch 160 1” to 2” Sch 80

3” to 10” S-40 12” to 14” S-STD 16” to 18” S-XS

Seamless

A106 Gr. B or API 5L Gr. B

(1) (2) PIPE

20” and above calculate Welded API 5L Gr B (3)

1½” and under Class acc. To B16.11

Socketweld/ Threaded A105N, B16.11 (5) FITTINGS

El’s Tees, Reducers, Caps,

Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (5)

Nipples and Swages 2” and under Seamless A106 Gr. B or

API 5L Gr. B

Sockolets/ Threadolets 1½” and under Class acc. To MSS

SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)


1½” and under Class 300 Socketweld RF

FLANGES 2” and above Class 300 Weldneck RF

A105N, B16.5 (8)


1½” and under Class 800 Socketweld/ Threaded

A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8

(6) GATE VALVES

2” and above Class 300 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 8 (6)



GLOBE VALVES 2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y,


1½” and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 1

(6) CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 1 (6)

1½” and under Class 300 Socketweld with nipples


(6) (7)

2” to 4” Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10

(6) (7) BALL VALVES

6” and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim ENP

(6) (7)


A105N body, lubricated, inverted pressure balanced, BC Trim ENP (6)

PLUG VALVES 2” and above Class 300 RF Flanged

A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim ENP

(6)

BUTTERFLY VALVES 4” and above Class 300 Lugged or RF







of 403





¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40

Seamless


(1) (2) PIPE






API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)










A105N body, BB, OS&Y, graphite packing, Trim No. 8

(6) GLOBE VALVES

2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8

(6)





(6) (7)


(6) (7) BALL VALVES


(6) (7)


A105N body, lubricated, inverted pressure balanced, BC Trim ENP (6)


A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim ENP

(6)








of 403





Up to 2" S-XXS 3" S-160 4” S-120

6" to 8” S-80 10” to 18” S-60


(1) (2) PIPE

20” and above calculate Welded API 5L Gr. B (3) FITTINGS

El's Tees,


1" and above


Weldolets 1” and above Buttweld A105N MSS SP 97



2" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8

(6) GATE VALVES

2½" and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)


(6) GLOBE VALVES

2½" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8

(6) 2" and under Class 300 RF Flanged A105N body, BC,Trim No. 1 (6)

CHECK VALVES 2½" and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 1 (6) 2" and under Class 300 RF Flanged A105N body, floating ball, RTFE

seats, Trim No. 10, fire safe (6) (7)


(6) (7) BALL VALVES


(6) (7)

1½" and under Class 300 RF Flanged A105N body, lubricated, inverted pressure balanced, BC, Trim ENP

(6) PLUG VALVES

2" and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim ENP

(6)








of 403





¾" S-160 1" to 2" S-80

3" S-40 4” to 18” S-80


(1) (2) PIPE






API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)







(6) GATE VALVES

2" and above Class 600 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)



(6) GLOBE VALVES


(6)





(6) (7)

2" to 4" Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (7) BALL VALVES


(6) (7)


A105N body, lubricated, inverted pressure balanced, BC Trim ENP

(6)



(6)



Notes: Notes (1) through (10) of 10.2.1





of 403





¾" S-XXS 1" to 2" S-160 3” to 18” S-80


(1) (2) PIPE






API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)







(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)

2" to 4" Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (7) BALL VALVES


(6) (7)


A105N body, lubricated, inverted pressure balanced, BC Trim ENP

(6) PLUG VALVES

2" and above Class 600 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim ENP

(6)








of 403





Up to 2" S-XXS 3" to 4" S-160 6" to 8” S-120

10” to 18” S-100


(1) (2) PIPE

20” and above calculate Welded API 5L Gr. B (3) FITTINGS El's Tees,


1" and above Buttweld A234-Gr. WPB, B16.9 (5)

Weldolets 1” and above Buttweld A 105N MSS SP 97 FLANGES 1” and above Class 600 Weldneck RF A 105N MSS SP 97 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.

1½" and under Class 600 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8

(6)

GATE VALVES


(6)

1½" and under Class 600 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 8

(6) GLOBE VALVES


(6) 1½" and under Class 600 RF Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 2" and above Class 600 RF Flanged A216-WCB body, BC, Trim No. 1 (6)

1½" and under Class 600 RF Flanged A105N body, floating ball, RTFE seats, Trim No. 10

(6) (7)

2" to 4" Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10, fire s.

(6) (7) BALL VALVES


(6) (7)

1½" and under Class 600 RF Flanged A105N body, lubricated, inverted pressure balanced, BC Trim ENP

(6) PLUG VALVES

2" and above Class 600 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim ENP

(6)








of 403


Line Class: 209CS1P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code



¾" S-160 1" to 18" S-80


(1) (2) PIPE

20” and above calculate Welded API 5L Gr. B (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 (4) FITTINGS




API 5L Gr. B


SP 97 Socketweld/

Threaded A105N, B16.11

MSS SP 97 (4)

Weldolets 2" and above Buttweld A 105N MSS SP 97 2½" and under Class 1500 Weldneck RTJ

FLANGES 3" and above Class 900 Weldneck RTJ

A105N, B16.5 (8)

BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20

1½" and under Class 1500 Socketweld A105N body, WB, OS&Y, graphite packing, API 602, Trim No.8

(6)

2” to 2½" Class 1500 RTJ Flanged A216-WCB, PSB, OS&Y, graphite packing, API 600, Trim No. 8 GATE VALVES

3" and above Class 900 RTJ Flanged A216-WCB, BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)

1½" and under Class 1500 Socketweld A105N body, WB, OS&Y, graphite packing, Trim No. 8

(6)

2” to 2½" Class 1500 RTJ Flanged A216-WCB body, PSB, OS&Y, graphite packing, Trim No. 8 GLOBE VALVES

3" and above Class 900 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8

(6)

1½" and under Class 1500 Socketweld A105N body, WC, Trim No. 1 (6) 2” to 2½" Class 1500 RTJ Flanged A216-WCB body, PSB, Trim No. 1 CHECK VALVES

3" and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 1 (6)



2” to 2½" Class 1500 3" to 4" Class 900

RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (7) BALL VALVES

6" and above Class 900 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim ENP

(6) (7)

1½" and under Class 1500 Socketweld A105N body, lubricated, inverted pressure balanced, WC Trim ENP

(6)

2” to 2½" Class 1500 PLUG VALVES

3" and above Class 900 RTJ Flanged A216-WCB body, lubricat., inverted

press. balanced, API 599,Trim ENP (6)

BUTTERFLY VALVES 4" and above Class 900 RTJ Flanged A216-WCB body, high performance,

fire-safe, API 609 Cat. B, Trim ENP






of 403


Line Class: 209CS2P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code



¾" S_XXS 1" to 2" S-160 3" to 18” S-80


(1) (2) PIPE






API 5L Gr. B


SP 97 Socketweld/

Threaded A105N, B16.11

MSS SP 97 (4)

Weldolets 2" and above Buttweld A 105N MSS SP 97 2½" and under Class 1500 Weldneck RTJ


A105N, B16.5 (8)

BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Soft Iron Octagonal Ring

1½" and under Class 1500 Socketweld A105N body, WB, OS&Y, graphite packing, API 602, Trim No.8

(6)

2” to 2½" Class 1500 RTJ Flanged A216-WCB, PSB, OS&Y, graphite packing, API 600, Trim No. 8 GATE VALVES

3" and above Class 900 RTJ Flanged A216-WCB, BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)

1½" and under Class 1500 Socketweld A105N body, WB, OS&Y, graphite packing, Trim No. 8

(6)

2” to 2½" Class 1500 RTJ Flanged A216-WCB body, PSB, OS&Y, graphite packing, Trim No. 8 GLOBE VALVES


(6)

1½" and under Class 1500 Socketweld A105N body, WC, Trim No. 1 (6) 2” to 2½" Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 1 CHECK VALVES

3" and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 1 (6)



(6) (7)

2” to 2½" Class 1500 3" to 4" Class 900

RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (7) BALL VALVES

6" and above Class 900 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim ENP

(6) (7)

1½" and under Class 1500 Socketweld A105N body, lubricated, inverted pressure balanced, WC Trim ENP

(6) 2” to 2½" Class 1500 PLUG VALVES

3" and above Class 900 RTJ Flanged A216-WCB body, lubricated, inverted

press. balanced, API 599, Trim ENP (6)

BUTTERFLY VALVES 4" and above Class 900 RTJ Flanged A216-WCB body, high performance,

fire-safe, API 609 Cat. B, Trim ENP






of 403


Line Class: 215CS1P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray



Up to 6" S-160 8" to 10" S-140 12" to 14” S-160

16” S-140 18” S-160


(1) (2) PIPE


1½" and under Class acc. to B16.11 Socketweld A105N B16.11 FITTINGS

El's Tees,



Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N, B16.11

MSS SP 97

Weldolets 2” and above Buttweld A 105N MSS SP 97 FLANGES All Class 1500 Weldneck RTJ A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.

1½" and under Class 1500 Socketweld A105N body, OS&Y, WB, graphite packing, API 602, Trim No.8 (6)

GATE VALVES 2" and above Class 1500 RTJ Flanged

A216-WCB body, Wedge type: OS&Y, PSB., graphite packing, API 600, Trim No. 8

(6)

1½" and under Class 1500 Socketweld A105N body, OS&Y, WB, graphite packing, Trim No. 8

(6) GLOBE VALVES

2" and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, PSB, graphite packing, Trim No. 8

(6) 1½" and under Class 1500 Socketweld A105N body, WC,Trim No. 1 (6) CHECK VALVES 2" and above Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 1 (6)






of 403




Item Size Rating


Up to 2" 3" to 6" 8" to 18”


(1) (2) PIPE

20” and above

calculate

Welded API 5L Gr. B (3) FITTINGS

El's Tees,


1½" and above



FLANGES All Class 1500 Weldneck RTJ A105N, B16.5 (8)

BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.

1½" and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.8

(6) GATE VALVES

2" and above Class 1500 RTJ Flanged A216-WCB body, Wedge type: OS&Y, PSB, graphite packing, API 600, Trim No. 8

(6)

1½" and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 8

(6) GLOBE VALVES


(6) 1½" and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 1 (6) CHECK VALVES 2" and above Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 1 (6)

Notes: In addition to Notes (1) through (10) of 10.2.1





of 403




Item Size Rating


Up to 4" S-160 Seamless A106 Gr. B or API 5L Gr. B

(1) (2) PIPE

6” and above calculate Welded API 5L Gr. B (3) FITTINGS El's Tees,


All


Weldolets 3/4” and above Buttweld A 105N MSS SP 97

FLANGES All Class 2500 Weldneck RTJ A350 LF2, B16.5 (8)


2" and under Class 2500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.8

(6) GATE VALVES

2½" and above Class 2500 RTJ Flanged A216-WCB body, Wedge type: OS&Y, PSB, graphite packing, API 600, Trim No. 8

(6)

2" and under Class 2500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 8

(6) GLOBE VALVES

2½" and above Class 2500 RTJ Flanged A216-WCB body, OS&Y, PSB, graphite packing, Trim No. 8

(6) 2" and under Class 2500 RTJ Flanged A105N body, WC, Trim No. 1 (6) CHECK VALVES 2½" and above Class 2500 RTJ Flanged A216-WCB body, PSC, Trim No. 1 (6)






of 403




Item Size Rating


Up to 2" 3" to 6" 8" to 18”


(1) (2) PIPE

20” and above

calculate

Welded API 5L Gr. B (3) FITTINGS

El's Tees,


1½" and above


Weldolets 1½” and above Buttweld A 105N MSS SP 97

FLANGES All Class 2500 Weldneck RTJ A350 LF2, B16.5 (8)



(6) GATE VALVES

2" and above Class 2500 RTJ Flanged A216-WCB body, Wedge type: OS&Y, PSB, graphite packing, API 600, Trim No. 8

(6)


(6) GLOBE VALVES


(6) 1½" and under Class 2500 RTJ Flanged A105N body, WC, Trim No. 1 (6) CHECK VALVES 2" and above Class 2500 RTJ Flanged A216-WCB body, PSC, Trim No. 1 (6)






of 403

10.2.17 Line Class: 101CS1P1

Line Class: 101CS1P1 Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code



¾” Sch 160 1” to 2” Sch 80

3” to 10” S-40 12” to 18” S-20



(1) (2) (3)






API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)


1½” and under Class 150 Socketweld RF FLANGES

2” and above Class 150 Weldneck RF A105N, B16.5




(6) GATE VALVES

2” and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 12

(6)



(6) GLOBE VALVES

2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12

(6)

1½” and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 10 (6)

CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (6)



(6) (7)


(6) (7) BALL VALVES

6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim 10

(6) (7)


A105N body, lubricated, inverted pressure balanced, BC, Trim 316

(6) PLUG VALVES

2” and above Class 150 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim 316

(6)


Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim 316






of 403





¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 10” S-40 12” to 18” S-20


(1) (2) PIPE







API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)






A105N body, BB, OS&Y, graphite packing, API 602, Trim No. 12

(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)


(6) (7) BALL VALVES


(6) (7)



(6) PLUG VALVES


(6)



Notes:c Notes (1) through (10) of 10.2.1 are applicable.





of 403





¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 10” S-40 12” to 18” S-20


(1) (2) PIPE







API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)







(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)


(6) (7) BALL VALVES


(6) (7)



(6) PLUG VALVES


(6)



Notes:c Notes (1) through (10) of 10.2.1 are applicable.





of 403





¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40

Seamless


(1) (2) PIPE






API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)







(6) GATE VALVES

2" and above Class 300 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 12

(6)



(6) GLOBE VALVES


(6)





(6) (7)


(6) (7) BALL VALVES

6" and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim 10

(6) (7)


A105N body, lubricated, inverted pressure balanced, BC Trim 316

(6) PLUG VALVES

2" and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim 316

(6)








of 403





1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-60

12” to 14” S-XS 16” to 18” S-60

Seamless


(1) (2) PIPE






API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)

Weldolets 2" and above Buttweld A 105N MSS SP 97 1½" and under Class 300 Socketwld RF FLANGES 2" and above Class 300 Weldneck RF

A105N, B16.5 (8)




(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)


(6) (7) BALL VALVES

6" and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim 10

(6) (7)


A105N body, lubricated, inverted pressure balanced, BC Trim 316

(6) PLUG VALVES

2" and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim 316

(6)








of 403


Line Class: 215CS2P1 Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray



Up to 18" S-160 Seamless A106 Gr. B or API 5L Gr. B

(1) (2) PIPE


1½" and under Class acc. to B16.11 Socketweld Buttweld

A105N B16.11 A234-Gr. WPB, B16.9 (5)

FITTINGS



Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N, B16.11

MSS SP 97 (4)

Weldolets 2” and above Buttweld A 105N MSS SP 97 FLANGES All Class 1500 Weldneck RTJ A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.

1½" and under Class 1500 Socketweld A105N body, OS&Y, WB, graphite packing, API 602, Trim No.8 (6)


A216-WCB body, Wedge type: OS&Y, PSB., graphite packing, API 600, Trim No. 8

(6)

1½" and under Class 1500 Socketweld A105N body, OS&Y, WB, graphite packing, Trim No. 8

(6) GLOBE VALVES


(6) 1½" and under Class 1500 Socketweld A105N body, WC,Trim No. 1 (6) CHECK VALVES 2" and above Class 1500 RTJ Flanged A216-WCB body, PSB, Trim No. 1 (6)






of 403

10.3 HIC Resistant Carbon Steel Line Classes


The following Notes shall apply to all of the carbon steel classes family (101CH1S) and shall be considered as an integral part of the individual line class.

Notes:




(3) Electric welding process, double-welded, full-penetration straight welds.





(6) Valve Trim


(7) Flanges


(8) Piping material shall be furnished in accordance with the requirements of JERES-A-301.

(9) Minimum line size shall be of 1” for line class with 4.5 and 6.0 mm of corrosion allowance

(10) Void.





of 403

10.3.2 Line Class: 101CH1S

Line Class: 101CH1S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray

Temperature (°C) (2) -29 100 200 260 Pressure Rating (bar) (2) 19.6 17.7 13.8 11.7

Item

Size Rating

Schedule

Type

Specification

Notes ¾" Sch 160

1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20

Seamless

A106 Gr. B (1)

(2) PIPE

20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS



Nipples and Swages 2" and under Seamless A106 Gr. B

Sockolets 1½" and under Socketweld (4) Weldolets 2" and above

Class acc. To MSS SP 97 Buttweld

A105N

1½" and under Class 150 Socketwd RF FLANGES 2" and above Class 150 Weldneck RF

A105N, B16.5 (7)

BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



GATE VALVES 2" and above Class 150 RF Flanged

A216-WCB body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12

(5)



(5) GLOBE VALVES


(5)

1½" and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (5)

CHECK VALVES 2" and above Class 150 RF Flanged A216-WCB body, BC, Trim No.10 (5)



(6) (5)


(6) (5) BALL VALVES

6" and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (5)


A105N body, lubricated, inverted pressure balanced, BC Trim SS 316

(5) PLUG VALVES

2" and above Class 150 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316

(5)

BUTTERFLY VALVES 4" and above Class 150 RF Flanged A216-WCB body, high performance,

fire-safe, API 609 Cat. B, Trim No. 10

Notes: Notes (1) through (10) of 10.3.1 shall apply.





of 403


Line Class: 101CH2S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray


Item

Size

Rating Schedule

Type

Specification

Notes

¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 10” S-40 12” to 18” S-20

Seamless A106 Gr. B (1)

(2) PIPE

20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)

1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS



Nipples and Swages 2” and under Seamless A106 Gr. B

Sockolets 1½” and under Socketweld Weldolets 2” and above


A105N



(7) BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(5) GATE VALVES

2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing,API 600, Trim No. 12

(5)



(5) GLOBE VALVES


(5)

1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (5)

CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No.10 (5)



(6) (5)


(6) (5)

BALL VALVES

6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (5)



(5)

PLUG VALVES

2” and above Class 150 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316

(5)

BUTTERFLY VALVES 4” and above Class 150 RF Flanged A216-WCB body, high performance,







of 403


Line Class: 101CH3S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay



1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-40

12” to 16” S-30 18” S-STD

Seamless A106 Gr. B (1) (2) PIPE



Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 where

applicable. (4)


Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld

Weldolets 2" and above Buttweld A105N, B16.11

1½" and under Class 150 Socketwd RF

FLANGES 2" and above Class 150 Weldneck RF

A105N, B16.5 (7)




(5) GATE VALVES


(5)



(5) GLOBE VALVES


(5)

1½" and under Class 800 Socketweld/ with nipples A105N body, BC,Trim No. 10 (5)




(6) (5)


(6) (5) BALL VALVES


(6) (5)



(5)

PLUG VALVES


(5)






of 403

10.3.5 Line Class: 101CH4S Line Class: 101CH4S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray



Up to 2” S-XXS 3” S-160 4” S-120 6” S-80

8” to 10” S-60 12” to 16” S-40

18” S-30

Seamless A106 Gr. B (1) (2)

PIPE

20” and above Calculate Welded A672 Gr. C65 Cl. 42 (3) FITTINGS El’s Tees,


1” and above Buttweld A234-Gr. WPB, B16.9 (4)


FLANGES 1” and above Class 150 Weldneck RF A 105N MSS SP 97 (7)


1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12

(5) GATE VALVES

2” and above Class 150 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)

1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 12

(5) GLOBE VALVES


(5) 1½” and under Class 150 RF Flanged A105N body, BC, Trim No. 10 (5) CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (5) 1½” and under Class 150 RF Flanged A105N body, floating ball, RTFE

seats, Trim No. 10, fire safe (6) (5)


(6) (5) BALL VALVES

6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim No. 10

(6) (5)

1½” and under Class 150 RF Flanged A105N body, lubricated, inverted pressure balanced, BC Trim 316

(5) PLUG VALVES


(5)


fire-safe, API 609 Cat. B,Trim 316






of 403



Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 51.1 46.6 43.8 41.5


¾” S-160 1” to 2” S-80

3” to 10” S-40 12” to 14” S-STD 16” to 18” S-XS

Seamless

A106 Gr. B (1)

(2) PIPE








A105N, B16.11






(5) GATE VALVES

2” and above Class 300 RF Flanged A216-WCB body,BB, OS&Y, graphite packing,API 600, Trim No. 12

(5)



(5) GLOBE VALVES


(5)

1½” and under Class 800 Socketweld with nipples A105N body, BC,Trim No. 10 (5)




(6) (5)


(6) (5) BALL VALVES


(6) (5)


A105N body, lubricated, inverted pressure balanced, BC,Trim SS 316

(5) PLUG VALVES


(5)


fire-safe, API 609 Cat. B,Trim No. 10






of 403





¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 18” S-40









A105N, B16.11



A105N, B16.5 (7)




(5) GATE VALVES


(5)



(5) GLOBE VALVES


(5)

1½” and under Class 800 Socketweld/ with nipples A105N body, BC,Trim No. 10 (5)


1½” and under Class 300 Socketweld / with nipples


(6) (5)


(6) (5) BALL VALVES


(6) (5)

1½” and under Class 600 Socketweld/ with nipples

A105N body, lubricated, inverted pressure balanced, BC, Trim SS 316

(5) PLUG VALVES


(5)








of 403





1½” S-XXS 2” to 3” S-160 4” to 6” S-80

8” to 10” S-60 12” to 14” S-XS 16” to 18” S-60







Sockolets 1½” and under Class acc. To MSS SP 97 Socketweld

Weldolets 2” and above Buttweld A105N

1½” and under Class 300 Socketwd RF


A105N, B16.5 (7)




(5) GATE VALVES

2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)



(5) GLOBE VALVES


(5)





(6) (5)


(6) (5) BALL VALVES


(6) (5)



(5) PLUG VALVES


(5)








of 403




Item

Size

Rating Schedule

Type

Specification

Notes

Up to 2” S-XXS 3” S-160 4” S-120

6” to 8” S-80 10” to 18” S-60


20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) FITTINGS El’s Tees,







(5) GATE VALVES


(5)


(5) GLOBE VALVES


(5) 1½” and under Class 300 RF Flanged A105N body, BC, Trim No. 10 (5) CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (5)

1½” and under Class 300 RF Flanged A105N body, floating ball, RTFE seats, Trim No. 10, fire safe

(6) (5)


(6) (5) BALL VALVES


(6) (5)


(5) PLUG VALVES


(5)


fire-safe, API 609 Cat. B, Trim 316






of 403




Item

Size

Rating Schedule

Type

Specification

Notes

¾” S-160 1” to 2” S-80

3” S-40 4” to 18” S-80

Seamless

A106 Gr. B (1)

(2) PIPE







Class acc. To MSS-SP97 Buttweld

A105N, MSS-SP97



A105N, B16.5




(5) GATE VALVES


(5)



(5) GLOBE VALVES


(5)





(6) (5)

2” to 4” Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (5) BALL VALVES


(6) (5)



(5)

PLUG VALVES

2” and above Class 600 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim SS 316

(5)








of 403




Item

Size

Rating Schedule

Type

Specification

Notes

¾” S-XXS 1” to 2” S-160

3” to 18” S-80

Seamless

A106 Gr. B (1)

(2) PIPE







Class acc. To MSS-SP97 Buttweld

A105N MSS-SP97



A105N, B16.5

(7) BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts.

GASKE TS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(5) GATE VALVES


(5)



(5) GLOBE VALVES


(5)





(6) (5)


(6) (5) BALL VALVES


(6) (5)



(5)

PLUG VALVES

2” and above Class 600 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim SS 316

(5)








of 403




Item

Size

Rating Schedule

Type

Specification

Notes

Up to 2” S-XXS 3” to 4” S-160 6” to 8” S-120

10” to 18” S-100









(5) GATE VALVES


(5)


(5) GLOBE VALVES




(6) (5)


(6) (5) BALL VALVES


(6) (5)


(5) PLUG VALVES


(5)








of 403


Line Class: 203CH2S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rati. Class: 300 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray



¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 18” S-40









A105N

1½” and under Class 300 Socketweld RTJ

FLANGES 2” and above Class 300 Weldneck RTJ

A105N, B16.5 (7)

BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20 (5)

1½” and under (5) Socketweld with nipples


(5) GATE VALVES

2” and above (5) RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)

1½” and under (5) Socketweld with nipples


(5) GLOBE VALVES

2” and above (5) RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12

(5)

1½” and under (5) Socketweld/ with nipples A105N body, BC,Trim No. 10 (5)

CHECK VALVES 2” and above (5) RTJ Flanged A216-WCB body, BC, Trim No. 10 (5)



(6) (5)

2” to 4” Class 300 RTJ Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10

(6) (5) BALL VALVES

6” and above Class 300 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (5)



(5) PLUG VALVES

2” and above Class 300 RTJ Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316

(5)

BUTTERFLY VALVES 4” and above Class 300 RTJ Flanged A216-WCB body, high performance,







of 403


Line Class: 206CH3S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 600 RTJ B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray


Item

Size

Rating Schedule

Type

Specification

Notes

Up to1½” S-XXS 2” to 4” S-160

6” to 10” S-100 12” to 18” S-80

Seamless

A106 Gr. B (1)

(2) PIPE






Sockolets 1½” and under Class acc. To B16.11 Socketweld

Weldolets 2” and above Buttweld A105N, MSS-SP97



A105N, B16.5

(7) BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20



(5) GATE VALVES

2” and above Class 600 RTJ Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)



(5) GLOBE VALVES

2” and above Class 600 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12

(5)


CHECK VALVES 2” and above Class 600 RTJ Flanged A216-WCB body, BC, Trim No. 10 (5)



(6) (5)

2” to 4” Class 600 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (5) BALL VALVES

6” and above Class 600 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (5)



(5) PLUG VALVES

2” and above Class 600 RTJ Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim SS 316

(5)








of 403





¾” S-160 1” to 18” S-80







Sockolets 1½” and under Socketweld A105N Weldolets 2” and above

Class acc. To MSS SP 97 Buttweld A105N, MSS-SP97

2½” and under Class 1500 Weldneck RTJ A105N, B16.5 FLANGES

3” and above Class 900 Weldneck RTJ A105N, B16.5 (7)

BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20


A105N body, WB, OS&Y, graphite packing, API 602, Trim No.12

(5)

2” to 2½” Class 1500 RTJ Flanged A216-WCB, PSB, OS&Y, graphite packing, API 600, Trim No. 12 GATE VALVES

3” and above Class 900 RTJ Flanged A216-WCB, BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)


A105N body, WB, OS&Y, graphite packing, Trim No. 12

(5)

2” to 2½” Class 1500 RTJ Flanged A216-WCB body, PSB, OS&Y, graphite packing, Trim No. 12 GLOBE VALVES


(5)

1½” and under Class 1500 Socketweld with nipples A105N body, WC, Trim No. 10 (5)

2” to 2½” Class 1500 RTJ Flanged A216-WCB body, PSB, Trim No. 10 CHECK VALVES

3” and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 10 (5)



(6) (5)

2” to 2½” Class 1500 BALL VALVES

3” and above Class 900 RTJ Flanged A216-WCB body, trunnion mounted,

fire safe, API 6D, Trim No. 10 (6) (5)


A105N body, lubricated, inverted pressure balanced, WC, Trim SS 316

(5) 2” to 2½” Class 1500 PLUG VALVES

3” and above Class 900 RTJ Flanged

A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316

(5)








of 403





¾” S-XXS 1” to 2” S-160

3” to 18” S-80 Seamless A106 Gr. B (1)

(2) PIPE






Sockolets 1½” and under Socketweld A105N, B16.11 Weldolets 2” and above


2½” and under Class 1500 Weldneck RTJ A105N, B16.5 FLANGES 3” and above Class 900 Weldneck RTJ A105N, B16.5 (7)

BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron Octagonal Ring



(5)



(5)



(5)



(5)






(6) (5)







3” and above Class 900 RTJ Flanged

A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316

(5)








of 403





1” to 1½” S-XXS 2” to 3” S-160 4” to 6” S-120

8” to 18” S-100







Sockolets 1½” and under Socketweld A105N, B16.11 Weldolets 2” and above


2½” and under Class 1500 Weldneck RTJ A105N, B16.5 FLANGES 3” and above Class 900 Weldneck RTJ A105N, B16.5 (7)




(5)



(5)



(5)



(5)






(6) (5)







3” and above Class 900 RTJ Flanged A216-WCB body, BC lubricated, inverted pressure balanced,API 599, Trim SS 316

(5)








of 403





Up to 6” S-160 8” to 10” S-140

12” to 14” S-160 16” S-140 18” S-160



1½” and under Class acc. To B16.11 Socketweld A105N B16.11

FITTINGS





BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.

1½” and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.12

(5)

GATE VALVES 2” and above Class 1500 RTJ Flanged

A216-WCB body, Wedge type: OS&Y, Press. Seal., graphite packing, API 600, Trim No. 12

(5)

1½” and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 12

(5) GLOBE VALVES

2” and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, Press. Seal., graphite packing, Trim No. 12

(5) 1½” and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 10 (5)

CHECK VALVES 2” and above Class 1500 RTJ Flanged A216-WCB body, Press. Seal., Trim No. 10

(5)






of 403

10.3.19 Line Class: 215CH2S Line Class: 215CH2S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray


Item Size Rating


¾ to 1½” S-XXS 2” to 6” S-160

8” S-XXS 10” to 18” S-160




FITTINGS







(5)



(5)


(5) GLOBE VALVES



CHECK VALVES 2” and above Class 1500 RTJ Flanged A216-WCB body, Press. Seal., Trim

No. 10 (5)






of 403



Item Size Rating


Up to 2” 3” to 6”

8” to 18” Seamless A106 Gr. B (1)

(2) PIPE

20” and above

calculate

Welded A672 Gr. C65 Cl. 42 (3) FITTINGS

El’s Tees,




FLANGES 1” and above Class 1500 Weldneck RTJ A105N MSS SP 97 (7)


1½” and under Class 1500 RTJ Flanged A105N body, WB, OS&Y, graphite packing, API 602, Trim No.12

(5) GATE VALVES

2” and above Class 1500 RTJ Flanged A216-WCB body, Wedge type: Press. Seal., OS&Y, graphite packing, API 600, Trim No. 12

(5)

1½” and under Class 1500 RTJ Flanged A105N body, WB, OS&Y, graphite packing, Trim No. 12

(5) GLOBE VALVES

2” and above Class 1500 RTJ Flanged A216-WCB body, Press. Seal., OS&Y, graphite packing, Trim No. 12



(5)






of 403



Item Size Rating


Up to 2” 3” to 6”

8” to 18” Seamless A106 Gr. B (1)

(2) PIPE

20” and above

calculate

Welded A672 Gr. C65 Cl. 42 (3) FITTINGS

El’s Tees,


All






(5)



(5)


(5) GLOBE VALVES




(5)






of 403

10.3.22 Line Class: 101CA2S

Line Class: 101CA2S Basic Material: HIC Resist. Low Temperature Carbon Steel Max. Temperature: 260°C Stress Relief: PWHT

Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray


Item

Size

Rating Schedule

Type

Specification

Notes

¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 10” S-40 12” to 18” S-20


(1) (2) PIPE

20” and above calculate Welded A671 Gr. CC65 Cl. 42 + S2 (3)

1½” and under Class acc. To B16.11 Socketweld A350 Gr. LF2 CL. 1, B16.11 FITTINGS


Couplings etc. 2” and above Buttweld A420 Gr. WPL6, B16.9 (4)

Nipples and Swage 2” and under Seamless A333 Gr. 6 Sockolets 1½” and under Socketweld Weldolets 2” and above


A350 Gr. LF2 CL. 1


2” and above Class 150 Weldneck RF A350 Gr. LF2 CL. 1, B16.5




(5) GATE VALVES

2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite packing,API 600, Trim No. 12

(5)


A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12

(5) GLOBE VALVES

2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite packing, Trim No. 12

(5)



(5) CHECK VALVES

2” and above Class 150 RF Flanged A352-LCB body, BC, Trim No.10 (5) 1½” and under Class 300 Socketweld

with nipples

A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, Trim No. 10, fire safe

(6) (5)

2” to 4” Class 150 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10

(6) (5)

BALL VALVES

6” and above Class 150 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (5)


A350 Gr. LF2 CL. 1 body, lubricated, inverted pressure balanced, BC Trim SS 316

(5)

PLUG VALVES

2” and above Class 150 RF Flanged A352-LCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316

(5)






of 403

10.3.23 Line Class: 101CA4S Line Class: 101CA4S Basic Material: HIC Resist. Low

Temp. Carbon Steel Max. Temperature: 260°C Stress Relief: per Code

Service: Sour Flare Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code



Up to 2” S-XXS 3” S-160 4” S-120 6” S-80

8” to 10” S-60 12” to 16” S-40

18” S-30


(1) (2)

PIPE

20” and above Calculate Welded A671 Gr. CC65 Cl. 12 + S2 (3) FITTINGS El’s Tees,


1” and above Buttweld A420 Gr. WPL6, B16.9 (4)

Lateral Y Tee Latrolet 1½” and under Socketweld/

Buttweld

A350 Gr. LF2 CL. 1/ A420 Gr. WPL6 Special Items. They shall be

designed on a project basis. FEM (Finite Element Method) analysis

required

(9)

Weldolets 1” and above Buttweld A350 Gr. LF2 CL. 1 MSS SP 97

FLANGES 1” and above Class 150 Weldneck RF A350 Gr. LF2 CL. 1 MSS SP 97 (7)


1½” and under Class 150 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12

(5)

GATE VALVES

2” and above Class 150 RF Flanged A352-LCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)

1½” and under Class 150 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12

(5) GLOBE VALVES


(5)

1½” and under Class 150 RF Flanged A350 Gr. LF2 CL. 1 body, BC, Trim No. 10

(5) CHECK VALVES

2” and above Class 150 RF Flanged A352-LCB body, BC, Trim No. 10 (5) 1½” and under Class 150 RF Flanged A350 Gr. LF2 CL. 1 body, floating

ball, RTFE seats, Trim No. 10, fire s. (6) (5)


(6) (5) BALL VALVES

6” and above Class 150 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D,Trim No. 10

(6) (5)






of 403

10.3.24 Line Class: 103CA2S

Line Class: 103CA2S Basic Material: HIC Resist. Low Temperature Carbon Steel Max. Temperature: 260°C Stress Relief: PWHT

Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray


Item

Size

Rating Schedule

Type

Specification

Notes

¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40

Seamless

A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C

(1) (2) PIPE







A350 Gr. LF2 CL. 1


2” and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1, B16.5




(5) GATE VALVES

2” and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, graphite packing,API 600, Trim No. 12

(5)


A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12

(5) GLOBE VALVES


(5)



(5) CHECK VALVES

2” and above Class 300 RF Flanged A352-LCB body, BC, Trim No.10 (5) 1½” and under Class 300 Socketweld

with nipples

A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, Trim No. 10, fire safe

(6) (5)


(6) (5)

BALL VALVES


(6) (5)


A350 Gr. LF2 CL. 1 body, lubricated, inverted pressure balanced, BC Trim SS 316

(5)

PLUG VALVES

2” and above Class 300 RF Flanged A352-LCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316

(5)






of 403

10.3.23 Line Class: 103CA4S Line Class: 103CA4S Basic Material: HIC Resist. Low

Temp. Carbon Steel Max. Temperature: 260°C Stress Relief: per Code

Service: Sour, Sour Flare Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code



Up to 2" S-XXS 3" S-160 4” S-120

6" to 8” S-80 10” to 18” S-60


(1) (2)

PIPE

20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2 (3) FITTINGS El’s Tees,


1” and above Buttweld A420 Gr. WPL6, B16.9 (4)


Buttweld



required

(9)


FLANGES 1” and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1 MSS SP 97 (7)


1½” and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12

(5)

GATE VALVES

2” and above Class 300 RF Flanged A352-LCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)

1½” and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12

(5) GLOBE VALVES


(5)

1½” and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BC, Trim No. 10

(5) CHECK VALVES

2” and above Class 300 RF Flanged A352-LCB body, BC, Trim No. 10 (5) 1½” and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, floating

ball, RTFE seats, Trim No. 10, fire s. (6) (5)


(6) (5) BALL VALVES

6” and above Class 300 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D,Trim No. 10

(6) (5)






of 403

10.4 Carbon Steel Amine Services Line Classes


The following Notes shall apply to all of this carbon steel classes family and shall be considered as an integral part of the individual line class.

Notes:





(4) Seal Welding





Where non-metallic seats, seals, liners etc. are used, the manufacturer’s pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat.

(7) Valve Trim


(8) Flanges


(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm of corrosion allowance

(10) Void.





of 403

10.4.2 Line Class: 101CS1D

Line Class: 101CS1D Basic Material: C.S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code

Temperature (°C) (2) -29 100 120 Pressure Rating (bar) (2) 19.6 17.7 16.9


¾”” Sch 160 1” to 2””” Sch 80 3” to 10”” S-40

Seamless

A106 Gr. B (1)

(2)

12” to 18” S-20 PIPE








SP97 Socketweld/

Threaded (4)

Weldolets 2” and above Buttweld

A105N MSS-SP97






(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)


(6) (7) BALL VALVES

6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted,fire safe, API 6D, Trim No. 10

(6) (7)






of 403




Item Size

Rating Schedule

Type

Specification

Notes

¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 10” S-40 12” to 18” S-20

Seamless

A106 Gr. B (1)

(2) PIPE








SP97 Socketweld/

Threaded (4)


A105N MSS-SP97



A105N, B16.5




(6)

GATE VALVES


(6)



(6) GLOBE VALVES


(6)


A105N body, BC, Trim No. 10

(6) CHECK VALVES

2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (6) 1½” and under Class 300 Socketweld

with nipples A105N body, floating ball, RTFE seats, Trim No. 10, fire safe

(6) (7)


(6) (7) BALL VALVES

6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted,fire safe, API 6D, Trim No. 10

(6) (7)

Notes: Notes (1) through (10) of 10.4.1 shall apply





of 403

10.4.4 Line Class: 101CS4D Line Class: 101CS4D Basic Material: C.S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Per Code



Up to 2”” S-XXS 3””” S-160 4” S-120 6” S-80

8” to 10” S-60 12” to 16” S-40

18”” S-30


20” and above Calculate Welded A672 Gr. C65 Cl. 22 (3) FITTINGS

El’s Tees,


All Buttweld A234-Gr. WPB, B16.9 (5)

Weldolets 1” and above Buttweld A105N, B16.5

FLANGES All Class 150 Weldneck RF A105N, B16.5 (8)



(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)

1½” and under Class 150 RF Flanged A105N body, BC, Trim No. 10 (6) CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (6)


(6) (7)


(6) (7) BALL VALVES


(6) (7)






of 403


Temperature (°C) (2) -29.0 100 120 Pressure Rating (bar) (2) 51.1 46.6 46.0

Item

Size

Rating Schedule

Type

Specification

Notes

¾” Sch 160 1” to 2” Sch 80

3” to 10” S-40 12” to 14” S-STD 16” to 18” S-XS





El’s Tees,





SP97 Socketweld/

Threaded (4)


A105N MSS-SP97



A105N, B16.5




(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)


(6) (7) BALL VALVES


(6) (7)






of 403



Item

Size

Rating Schedule

Type

Specification

Notes

¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 18” S-40





El’s Tees,





SP97 Socketweld/

Threaded (4)


A105N MSS-SP97



A105N, B16.5




(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)


(6) (7) BALL VALVES


(6) (7)






of 403




Item

Size Rating

Schedule

Type

Specification

Notes ¾” S-XXS

1” to 2” S-160 3” to 18” S-80

Seamless

A106 Gr. B (1)

(2) PIPE




El’s Tees,





SP97 Socketweld/

Threaded (4)


A105N MSS-SP97



A105N, B16.5




(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(7) (6)


(7) (6) BALL VALVES


(7) (6)






of 403

10.4.8 Line Class: 209CS2D Line Class: 209CS2D Basic Material: C.S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification

Notes ¾” S_XXS

1” to 2” S-160 3” to 18” S-80

Seamless

A106 Gr. B (1)

(2) PIPE




El’s Tees,





SP97 Socketweld/

Threaded (4)


A105N MSS-SP97



A105N, B16.5

(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20



(6)

2 to 2½” Class 1500 RTJ Flanged A216-WCB, PSB, OS&Y, graphite packing, API 600, Trim No. 12 GATE VALVES


(6)



(6)

2 to 2½” Class 1500 RTJ Flanged A216-WCB body, PSB, OS&Y, graphite packing, Trim No. 12 GLOBE VALVES


(6)


2 to 2½” Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 10 CHECK VALVES




(7) (6)


3” and above Class 900 RTJ Flanged A216 Gr. WCB body, BB, trunnion

mounted, trim 10 (7) (6)






of 403

10.4.9 Line Class: 215CS1D Line Class: 215CS1D Basic Material: C. S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray



Up to 6” S-160 8” to 10” S-140

12” to 14” S-160 16” S-140 18” S-160




FITTINGS






1½” and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.12 (6)


A216-WCB body, Wedge type: OS&Y, PSB, graphite packing, API 600, Trim No. 12

(6)


(6) GLOBE VALVES

2” and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, PSB, graphite packing, Trim No. 12

(6) 1½” and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 10 (6) CHECK VALVES 2” and above Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 10 (6)






of 403


Line Class: 215CS2D Basic Material: C. S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray



¾ to 1½” S-XXS 2” to 6” S-160

8” S-XXS 10” to 18” S-160




FITTINGS







(6)


A216-WCB body, Wedge type: OS&Y, PSB, graphite packing, API 600, Trim No. 12

(6)


(6) GLOBE VALVES

2” and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, PSB, graphite packing, Trim No. 12

(6) 1½” and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 10 (6) CHECK VALVES 2” and above Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 10 (6)






of 403

10.5 Carbon Steel Flare System Services Line Classes


The following Notes shall apply to all of the carbon steel classes family (101CH1F) and shall be considered as an integral part of the individual line class.

Notes:









(6) Valve Trim


(7) Flanges


(8) Branch Connections

Branch connections shall be of lateral type (45 degrees inclination) as stipulated by JERES-L-310 and JERES-F-007.

(9) Piping material shall be furnished in accordance with the requirements of JERES-A-301

(10) Void.





of 403

10.5.2 Line Class: 101CH1F

Line Class: 101CH1F Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour Flare Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray


Item

Size

Rating Schedule

Type

Specification

Notes

¾” Sch 160 1” to 2” Sch 80

3” to 10” S-40 12” to 14” S-STD 16” to 18” S-XS


(1) (2) PIPE




Socketweld/ Threaded A105N, B16.11 (4)

1½” and under Socketweld/ Buttweld

A105N/A234 WPB Special Items. They shall be


required

(8) Lateral Y Tee Latrolet


Nipples and Swage 2” and under Seamless A106 Gr. B or API 5L Gr. B

Sockolets/ Threadolets 1½” and under Socketweld/

Threaded A105N MSS SP 97 (4)

Weldolets 2” and above

Class acc. To MSS SP97

Buttweld A 105N MSS SP 97

1½” and under Class 150 Socketweld RF A105N, B16.5 FLANGES

2” and above Class 150 Weldneck RF A105N, B16.5 (7) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



GATE VALVES 2” and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite

packing,API 600, Trim No. 12 (5)









(5) (6)


(5) (6) BALL VALVES


(5) (6)






of 403

10.5.3 Line Class: 101CH2F Line Class: 101CH2F Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour Flare Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray


Item

Size

Rating Schedule

Type

Specification

Notes

¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 10” S-40 12” to 18” S-20


(1) (2) PIPE




Socketweld/ Threaded A105N, B16.11 (4)




required


2” and above Buttweld A234-Gr. WPB, B16.9 (8) Nipples and

Swages 2” and under Seamless A106 Gr. B or API 5L Gr. B


SP97 Socketweld/

Threaded A105N

MSS SP 97 (4)


1½” and under Class 150 Socketweld RF A105N, B16.5

FLANGES 2” and above Class 150 Weldneck RF A105N, B16.5




GATE VALVES 2” and above Class 150 RF Flanged


(5)









(5) (6)


(5) (6) BALL VALVES


(5) (6)






of 403

10.5.4 Line Class: 101CH4F Line Class: 101CH4F Basic Material: HIC Resist. C. S. Max. Temperature: 260°C Stress Relief: per Code Service: Sour Flare Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code



Up to 2” S-XXS 3” S-160 4” S-120 6” S-80

8” to 10” S-60 12” to 16” S-40

18” S-30


PIPE



1” and above Buttweld A105N, B16.11 (4)


Buttweld

A105N / A234-Gr. WPB, B16.9 Special Items. They shall be


required

(8)


FLANGES 1” and above Class 150 Weldneck RF A105N MSS SP 97 (7)


1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12 (5)


A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)

1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 12 (5)

GLOBE VALVES 2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite


1½” and under Class 150 RF Flanged A105N body, BC, Trim No. 10 (5) CHECK VALVES

2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10

1½” and under Class 150 RF Flanged A105N body, floating ball, RTFE seats, Trim No. 10, fire s.

(5) (6)


(5) (6) BALL VALVES


(5) (6)






of 403

10.5.5 Line Class: 103CH2F

Line Class: 103CH2F Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour Flare Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size

Rating Schedule

Type

Specification

Notes

¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 10” S-40 12” to 18” S-20




1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 (4)




required


2” and above Buttweld A234-Gr. WPB, B16.9 (5) Nipples and

Swages 2” and under Seamless A106 Gr. B or API 5L Gr. B

Sockolets 1½” and under Class acc. to MSS SP97 Socketweld A105N

MSS SP 97 (4)


1½” and under Class 300 Socketweld RF A105N, B16.5 (7) FLANGES

2” and above Class 300 Weldneck RF A105N, B16.5 (7) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.





(5)









(5) (6)


(5) (6) BALL VALVES


(5) (6)






of 403

10.5.6 Line Class: 101CA1F

Line Class: 101CA1F Basic Material: HIC Resist. Low Temperature Carbon Steel Max. Temperature: 260°C Stress Relief: PWHT

Service: Sour Flare Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray


Item

Size

Rating Schedule

Type

Specification

Notes

¾” Sch 160 1” to 2” Sch 80

3” to 10” S-40 12” to 14” S-STD 16” to 18” S-XS


(1) (2) PIPE






Buttweld



required

(8)



A350 Gr. LF2 CL. 1

1½” and under Class 150 Socketwd RF (7) FLANGES 2” and above Class 150 Weldneck RF

A350 Gr. LF2 CL. 1, B16.5 (7)



A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite pack., API 602, Trim No.12 (5)

GATE VALVES 2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite




GLOBE VALVES 2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite




(5) CHECK VALVES

2” and above Class 150 RF Flanged A352-LCB body, BC, Trim No.10 (5)


A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, Trim No.10, fire s.

(5) (6)


(5) (6) BALL VALVES


(5) (6)


A350 Gr. LF2 CL. 1 body, lubricated, inverted press balan.,BC Trim SS 316 (5)

PLUG VALVES 2” and above Class 150 RF Flanged A352-LCB body, BC lubricat, inverted

press. Balanc.,API 599, Trim SS 316 (5)






of 403


Line Class: 101CA2F Basic Material: HIC Resist. Low Temperature Carbon Steel Max. Temperature: 260°C Stress Relief: PWHT

Service: Sour Flare Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray


Item

Size

Rating Schedule

Type

Specification

Notes

¾" S-XXS 1” to 2” S-160 3" to 4” S-80

6" to 10” S-40 12" to 18” S-20


(1) (2) PIPE






A350 Gr. LF2 CL. 1/ A420 Gr. WPL6 Special Items. They shall be design. on a proj. basis. FEM (Finite Element

Method) analysis required


2” and above Buttweld A420 Gr. WPL6, B16.9 (4) Nipples and Swage 2” and under Seamless A333 Gr. 6



A350 Gr. LF2 CL. 1

1½” and under Class 150 Socketwd RF (7) FLANGES 2” and above Class 150 Weldneck RF

A350 Gr. LF2 CL. 1, B16.5 (7)

BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



GATE VALVES 2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite








(5) CHECK VALVES



A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, Trim No.10, fire s.

(5) (6)


(5) (6) BALL VALVES


(5) (6)


A350 Gr. LF2 CL. 1 body, lubricated, inverted press balan.,BC Trim SS 316 (5)

PLUG VALVES 2” and above Class 150 RF Flanged A352-LCB body, BC lubricat, inverted

press. balanc., API 599, Trim SS 316 (5)






of 403


Line Class: 103CA2F Basic Material: HIC Resist. Low Temperature C.S. Max. Temperature: 260°C Stress Relief: PWHT

Service: Sour Flare Code: ASME B31.3 Min. Temperature: -45.5°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size

Rating Schedule

Type

Specification

Notes

¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 10” S-40 12” to 18” S-20


(1) (2) PIPE

20” and above calculate Welded A671 Gr. CC65 Cl. 42 + S2 (3) FITTINGS El’s Tees,


1½” and under Class acc. To B16.11 Socketweld A350 Gr. LF2 CL. 1, B16.11 (4)


A350 Gr. LF2 CL. 1/ A420 Gr. WPL6, B16.11. Special Items. They shall be


required


2” and above Buttweld A420 Gr. WPL6, B16.9 (4) Nipples and

Swages 2” and under Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C

Sockolets 1½” and under Class acc. to MSS SP97 Socketweld A350 Gr. LF2 CL. 1

MSS SP 97 (4)


1½” and under Class 300 Socketweld RF A350 Gr. LF2 CL. 1, B16.5 (7) FLANGES

2” and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1, B16.5 (7) BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.




A352-LCB body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12

(5)







(5) CHECK VALVES



A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, Trim No. 10, fire s.

(5) (6)


(5) (6) BALL VALVES


(5) (6)






of 403

10.6 Carbon Steel Boiler Piping Services Line Classes



Notes:




(3) Seamless or double-arch-welded, full-penetration straight welds.

(4) Seal Welding






(7) Valve Trim


(8) Flanges






of 403

10.6.2 Line Class: 101CS1B

Line Class: 101CS1B Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: ASME B31.1 Code: ASME B31.1 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size Rating Schedule Type Specification

Notes Up to 2” Sch 80 3” to 10” Sch 40 PIPE

12” to 24” 6.35mm as minimum Seamless SA106 Gr. B (1)

(2)

1½” and under Class 3000 Socketweld/ Threaded SA105N, B16.11 (5) FITTINGS

El’s Tees,


2” and above Buttweld SA234-Gr. WPB, B16.9 (5)

Nipples and Swages 2” and under Sch 80 Seamless SA106 Gr. B

Sockolets/ Threadolets 1½” and under Class 3000 Socketweld/

Threaded SA105N

MSS SP 97 (4)

Weldolets 2” and above Buttweld SA105N MSS SP 97

1½” and under Class 150 Socketweld RF SA105N, B16.5

FLANGES 2” and above Class 150 Weldneck RF SA105N, B16.5

(8) BOLTING SA193 B7 stud bolts, semi-finished, heavy pattern with SA194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.


SA105N body, BB, OS&Y, graphite packing, API 602, Trim No.8 (6)


SA216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)


SA105N body, BB, OS&Y, graphite packing, Trim No. 8

(6) GLOBE VALVES

2” and above Class 150 RF Flanged SA216-WCB body, BB, OS&Y, graphite packing, Trim No. 8

(6)

1½” and under Class 800 Socketweld/ Threaded SA105N body, BC, Trim No. 1 (6)

CHECK VALVES 2” and above Class 150 RF Flanged SA216-WCB body, BC, Trim No. 1 (6)






of 403

10.6.3 Line Class: 101CS2B Line Class: 101CS2B Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: ASME B31.1 Code: ASME B31.1 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size Rating


¾” Sch 160 1” to 2” Sch 80

3” to 10” S-40 PIPE

12” to 24” S-20

Seamless SA106 Gr. B (1) (2)


Socketweld/ Threaded SA105N, B16.11 (5) FITTINGS

El’s Tees,



Nipples and Swages 2” and under Seamless SA106 Gr. B

Sockolets/ Threadolets 1½” and under Class. Acc. To MSS

SP97 Socketweld/

Threaded SA105N

MSS SP 97 (4)

Weldolets 2” and above Buttweld SA105N MSS SP 97





SA105N body, BB, OS&Y, graphite packing, API 602, Trim No.8

(6) GATE VALVES

2” and above Class 150 RF Flanged SA216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)



(6) GLOBE VALVES


(6)








of 403

10.6.4 Line Class: 103CS2B Line Class: 103CS2B Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: ASME B31.1 Code: ASME B31.1 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size Rating


¾” S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 18” S-40 PIPE

20” and above calculate

Seamless SA106 Gr. B (1) (2)

1½” and under Socketweld/ Threaded SA105N, B16.11 (5) FITTINGS

El’s Tees,



Nipples and Swages 2” and under Seamless SA106 Gr. B

Sockolets/ Threadolets 1½” and under Socketweld/

Threaded SA105N

MSS SP 97 (4)

Weldolets 2” and above Buttweld SA 105N MSS SP 97





SA105N body, BB, OS&Y, graphite packing, API 602, Trim No.8

(6) GATE VALVES

2” and above Class 300 RF Flanged SA216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)



(6) GLOBE VALVES


(6)








of 403

10.6.5 Line Class: 101CJ1B Line Class: 101CJ1B Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: per Code Service: ASME B31.1 Code: ASME B31.1 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code



¾” S-160 1" to 2" S-80 3" to 10” S-40 12” to 18” S-20

PIPE


Seamless SA335 Gr. P11 (1) (2)

1½" and under

Class acc. to B16.11

Socketweld/ Threaded SA182 Gr. F11, B16.11 (5)

FITTINGS


Couplings etc. 2" and above Buttweld SA234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9 (5)

Nipples and Swages 2" and under Seamless SA335 Gr. P11

Sockolets/ Threadolets 1½" and under Class acc. to MSS

SP97 Socketweld/

Threaded SA182 Gr. F11 Cl. 2,

MSS-SP97 (4)

Weldolets 2" and above Buttweld SA182 Gr. F11 Cl. 2, MSS-SP97

1½" and under Class 150 Socketweld RF SA182 Gr. F11 Cl. 2, B16.5

FLANGES 2" and above Class 150 Weldneck RF SA182 Gr. F11 Cl. 2, B16.5

(8) BOLTING SA193 B16 stud bolts, heavy pattern with SA194 4 heavy hex nuts

GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20.


SA182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8

(6) GATE VALVES

2" and above Class 150 RF Flanged SA217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8

(6)


SA182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8

(6) GLOBE VALVES

2" and above Class 150 RF Flanged SA217 Gr. WC6, BB, OS&Y, graphite packing, Trim No. 8

(6)


SA182 Gr. F11 Cl. 2 body, BC, Trim No. 1

(6) CHECK VALVE

2" and above Class 150 RF Flanged SA217 Gr. WC6 body, BC, Trim No. 1 (6) Notes: Notes (1) through (8) of 10.6.1 shall apply.





of 403

10.7 Carbon & Alloy Steel Piping Catalyst & Slurry Services Line Classes



Notes:


Piping schedules indicated include corrosion and erosion allowances due to the process catalyst flow.






(5) Valve Trim


(6) Flanges


(7) Rating of flanges shall be in accordance with ASME B16.5 pressure class.





of 403

10.7.2 Line Class: 401CS1E Line Class: 401CS1E Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 CF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code



PIPE Up to 10” S-XXS Seamless A106 Gr. B (1) (2)

FITTINGS


etc.

2” and above S-XXS Buttweld A234-Gr. WPB, B16.9 (3)

Weldolets 2” and above S-XXS Buttweld A 105N MSS SP 97

FLANGES All Class 150 Compact Flanged Conn

A105N, B16.5, Norsok Std or equivalent (6)

BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard

BALL VALVES All Class 150 Compact Flanged Conn

A216-WCB body, graphite packing, 316 Ball, Metal seats, fire safe (4) (5)

Vee BALL VALVES All Class 150 Compact Flanged Conn

A216-WCB body, graphite packing, 316 (317) Ball, Metal seats, fire safe (4) (5)






of 403





FITTINGS


etc.















of 403

10.7.7 Line Class: 403CJ2E Line Class: 403CJ2E Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 CF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code



PIPE Up to 10” S-XXS Seamless A335 Gr. P11 (1) (2)

FITTINGS


etc.

2” and above S-XXS Buttweld A234-Gr. WP11, B16.9 (3)

Weldolets 2” and above S-XXS Buttweld A 182 Gr. F11 Cl. 2 MSS SP 97


A 182 Gr. F11 Cl. 2, B16.5, Norsok Std or equivalent (6)

BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard


A 182 Gr. F11 Cl. 2/A217-WC6 body, graphite packing, 316 Ball, Metal seats, fire safe

(4) (5)


A 182 Gr. F11 Cl. 2/A217-WC6 body, graphite packing, 316 (317) Ball, Metal seats, fire safe

(4) (5)






of 403

10.7.8 Line Class: 401CL2E Line Class: 401CL2E Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 CF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code




FITTINGS


etc.


Weldolets 2” and above S-XXS Buttweld A 182 Gr. F5 MSS SP 97


A 182 Gr. F5, B16.5, Norsok Std or equivalent (6)



A 182 Gr. F5/A217-C5 body, graphite packing, 316 Ball, Metal seats, fire safe

(4) (5)


A 182 Gr. F5/A217-C5 body, graphite packing, 316 (317) Ball, Metal seats, fire safe

(4) (5)






of 403





FITTINGS


etc.








(4) (5)



(4) (5)






of 403

10.7.11 Line Class: 403SC0E Line Class: 403SC0E Basic Material: SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 CF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code



PIPE Up to 10” S-XXS Seamless A312 Gr. TP 304H (1) (2)

FITTINGS


etc.

2” and above S-XXS Buttweld A403-Gr. WP304H, B16.9 (3)

Weldolets 2” and above S-XXS Buttweld A 182 Gr. F304H MSS SP 97


A 182 Gr. F304H, B16.5, Norsok Std or equivalent (6)



A 182 Gr. F304H /A351 Gr.CF8-body, graphite packing, 316 Ball, Metal seats, fire safe, carbon content 0.04% as minimum

(4) (5)


A 182 Gr. F304H /A351 Gr.CF8- body, graphite packing, 316 (317) Ball, Metal seats, fire safe, carbon content 0.04% as minimum

(4) (5)






of 403

10.7.12 Line Class: 403SC1E Line Class: 403SC1E Basic Material: SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 CF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code



PIPE Up to 10” S-XXS Seamless A312 Gr. TP 304H (1) (2)

FITTINGS


etc.

2” and above S-XXS Buttweld A403-Gr. WP304H, B16.9 (3)

Weldolets 2” and above S-XXS Buttweld A 182 Gr. F304H MSS SP 97


A 182 Gr. F304H, B16.5, Norsok Std or equivalent (6)



A 182 Gr. F304H /A351 Gr.CF8-body, graphite packing, 316 Ball, Metal seats, fire safe, carbon content 0.04% as minimum

(4) (5)


A 182 Gr. F304H /A351 Gr.CF8- body, graphite packing, 316 (317) Ball, Metal seats, fire safe, carbon content 0.04% as minimum

(4) (5






of 403

10.8 Carbon Steel Caustic Services Line Classes



Notes:



(2) Service temperatures and material grade limits shall be in accordance with NACE RP0403.


(4) Seal Welding





Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat.

(7) Valve Trim


(8) Flanges






of 403

10.8.2 Line Class: 101CS1C

Line Class: 101CS1C Basic Material: C.S. Caustic Max. Temperature: 76°C Stress Relief: PWHT Service: Caustic 50% max Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code

Temperature (°C) (2) -29 76 Pressure Rating (bar) (2) 19.6 18.4


¾" Sch160 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20



1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5 FITTINGS

El's Tees,





SP97 Socketweld/

Threaded (4)

Weldolets 2" and above Buttweld

A105N MSS-SP97

1½" and under Class 150 Socketweld RF A105N, B16.5

FLANGES 2" and above Class 150 Weldneck RF A105N, B16.5



A105N body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES

2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, PTFE packing, Trim NO. 9

(6)


A105N body, BC, PTFE gasket, trim NO. 9 CHECK VALVES

2" and above Class 150 RF Flanged A216-WCB body, BC, PTFE gasket, Trim NO. 9

(6)


A105N body, BB, OS&Y, PTFE packing, API 602, Trim NO. 9

(6) GATE VALVES

2” and above Class 150 RF Flanged A216-WCB body, Wedge type: BB, OS&Y,PTFE packing,API 600, Trim NO. 9

(6)


A105N body, API 599, RTFE Sleeve and Packing PLUG VALVES

2" and above Class 150 RF Flanged A216-WCB body, API 599, RTFE Sleeve and Packing

(6)






of 403





¾" S-XXS 1” to 2” S-160 3" to 4” S-80

6" to 10” S-40 12" to 18” S-20




El's Tees,





SP97 Socketweld/

Threaded (4)


A105N MSS-SP97

1½" and under Class 150 Socketweld RF A105N, B16.5

FLANGES 2" and above Class 150 Weldneck RF A105N, B16.5





(6)




(6)



(6) GATE VALVES


(6)




(6)






of 403





¾" Sch 160 1" to 2" Sch 80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS




El's Tees,





SP97 Socketweld/

Threaded (4)


A105N MSS-SP97

1½" and under Class 300 Socketweld RF A105N, B16.5 FLANGES

2" and above Class 300 Weldneck RF A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.




(6)




(6)



(6) GATE VALVES


(6)




(6)






of 403




Item Size Rating


¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40


20” and above calculate welded A672 Gr. C65 Cl. 22 (3)


El's Tees,





SP97 Socketweld/

Threaded (4)


A105N MSS-SP97

1½" and under Class 300 Socketweld RF A105N, B16.5 FLANGES

2" and above Class 300 Weldneck RF A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.


A105N body, BB, OS&Y, graphite packing, Trim NO. 9 GLOBE VALVES

2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim NO. 9

(6)

1½" and under Class 800 Socketweld with nipples A105N body, BC, Trim NO. 9 CHECK VALVES

2" and above Class 300 RF Flanged A216-WCB body, BC, Trim NO. 9 (6)



(6) GATE VALVES


(6)




(6)






of 403

10.8.6 Line Class: 101CA2C

Line Class: 101CA2C Base Material: Low Temp C.S. Caustic Max. Temperature: 76°C Stress Relief: PWHT

Service: Caustic 50% max Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code



¾" S-XXS 1” to 2” S-160 3" to 4” S-80

6" to 10” S-40 12" to 18” S-20


(1) (2) PIPE


1½" and under Class acc. to B16.11 Socketweld/ Threaded A350 Gr. LF2 CL. 1, B16.11 (5 FITTINGS

El's Tees,






SP97 Socketweld/

Threaded (4)


A350 Gr. LF2 CL. 1, MSS SP 97

1½" and under Class 150 Socketweld RF A350 Gr. LF2 CL. 1, B16.5 FLANGES

2" and above Class 150 Weldneck RF A350 Gr. LF2 CL. 1, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.


A350 Gr. LF2 CL. 1 body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES

2" and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, PTFE packing, Trim NO. 9

(6)


A350 Gr. LF2 CL. 1 body, BC, PTFE gasket, trim NO. 9 CHECK VALVES

2" and above Class 150 RF Flanged A352-LCB body, BC, PTFE packing, Trim NO. 9

(6)


A350 Gr. LF2 CL. 1 body, BB, OS&Y, PTFE gasket, API 602, Trim NO. 9

(6) GATE VALVES

2” and above Class 150 RF Flanged A352-LCB body, Wedge type: BB, OS&Y,PTFE packing,API 600, Trim NO. 9

(6)


A350 Gr. LF2 CL. 1 body, API 599, RTFE Sleeve and Packing PLUG VALVES

2" and above Class 150 RF Flanged A352-LCB body, API 599, RTFE Sleeve and Packing

(6)






of 403

10.8.7 Line Class: 103CA2C

Line Class: 103CA2C Base Material: Low Temp C.S. Caustic Max. Temperature: 76°C Stress Relief: PWHT

Service: Caustic 50% max Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size Rating


¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40


(1) (2) PIPE


1½" and under Class acc. to B16.11 Socketweld/ Threaded A350 Gr. LF2 CL. 1, B16.11 (5 FITTINGS

El's Tees,






SP97 Socketweld/

Threaded (4)


A350 Gr. LF2 CL. 1, MSS SP 97

1½" and under Class 300 Socketweld RF A350 Gr. LF2 CL. 1, B16.5 FLANGES

2" and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.


A350 Gr. LF2 CL. 1 body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES

2" and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, PTFE packing, Trim NO. 9

(6)


A350 Gr. LF2 CL. 1 body, BC, PTFE gasket, trim NO. 9 CHECK VALVES

2" and above Class 300 RF Flanged A352-LCB body, BC, PTFE gasket, Trim NO. 9

(6)


A350 Gr. LF2 CL. 1 body, BB, OS&Y, PTFE packing, API 602, Trim NO. 9

(6) GATE VALVES

2” and above Class 300 RF Flanged A352-LCB body, Wedge type: BB, OS&Y,PTFE packing,API 600, Trim NO. 9

(6)


A350 Gr. LF2 CL. 1 body, API 599, RTFE Sleeve and Packing PLUG VALVES

2" and above Class 300 RF Flanged A352-LCB body, API 599, RTFE Sleeve and Packing

(6)






of 403

10.9 Carbon Steel for Sulfuric Acid Services Line Classes



Notes:





(4) Seal Welding






(7) Valve Trim


(8) Flanges






of 403

10.9.2 Line Class: 101CS2A

Line Class: 101CS2A Base Material: Carbon Steel Max. Temperature: 80°C Stress Relief: per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray

Temperature (°C) (2) -29.0 80 Pressure Rating (bar) (2) 17.2 14.1

Item Size Rating


2" to 3" Sch 160 4" to 6” Sch 80 PIPE 8” to 12” Sch 40


FITTINGS


Couplings etc.


Weldolets 2" and above Buttweld A105N MSS-SP97 FLANGES All Class 150 Weldneck RF A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21

GATE VALVE 2" and under Class 150 RF Flanged A351 CN7M, BB, OS&Y, Trim 316, PTFE Gask&Pack (6)

GLOBE VALVES All Class 150 RF Flanged A351 CN7M body, BB, OS&Y, PTFE Gask&Pack, Trim No. 13

(6)

CHECK VALVES All Class 150 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask

(6)

PLUG VALVES All Class 150 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing

(6)






of 403





2" to 3" S-XXS 4" to 6” S-160 8” to 10” S-80

PIPE

12” to 14” S-60


FITTINGS


Couplings etc.


Weldolets 2" and above Buttweld A105N MSS-SP97


BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21

GATE VALVE 2" and under Class 150 RF Flanged A351 CN7M, BB, OS&Y, Trim 316, PTFE Gask&Pack

(6)


(6)


(6)


(6)






of 403





2" S-XXS 3" to 4” S-160 PIPE 6” to 18” S-80


FITTINGS


Couplings etc.


Weldolets 2" and above Buttweld A105N MSS-SP97 FLANGES All Class 300 Weldneck RF A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21


(6)


(6)


(6)


(6)






of 403





1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-60

12” to 14” S-XS

PIPE

16” to 18” S-60


FITTINGS


Couplings etc.


Weldolets 2" and above Buttweld A105N MSS-SP97




(6)


(6)


(6)


(6)






of 403

10.10 Carbon Steel for Hydrogen Services Line Classes


The following Notes shall apply to all of the carbon steel classes family (101CS1H) and shall be considered as an integral part of the individual line class.

Notes:

(1) Material and Corrosion Allowance:

All carbon steel piping shall be killed carbon steel.


(2) For hydrogen service, refer to API-941 for temperature limits of material at applicable hydrogen partial pressure. Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.


(4) Seal Welding

Threaded and socket welded connections are not allowed.



Threaded connections only allowed downstream of vents, drains, hydrotest connections, and instrument take-offs. Threaded O'lets only allowed for thermowell and hydrotest connections.



(7) Valve Trim


(8) Flanges


Flange connections shall be avoided as possible and replaced with buttwelded connections

(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm of corrosion allowance.





of 403

10.10.2 Line Class: 101CS1H

Line Class: 101CS1H Basic Material: C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray



Notes 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20


20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS

El's Tees,





BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts

GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)

1½" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8 (6)


A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)

1½" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8

(6) GLOBE VALVES








of 403





Notes 1” to 2” S-160 3" to 4” S-80

6" to 10” S-40 12" to 18” S-20



El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403





Notes 1" to 2" Sch 80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS



El's Tees,



Weldolets All Buttweld A105N MSS-SP97

FLANGES 1" and above Class 300 Weldneck RF A105N B16.5 (8)




(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403





Notes 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40



El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403





1" to 18” Seamless A106 Gr. B (1) (2) PIPE


Eelded A672 Gr. C65 Cl. 32 (3) FITTINGS El's Tees,





BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)


(6) GATE VALVES


(6)

1½" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 8

(6) GLOBE VALVES


(6) 1½" and under Class 300 RF Flanged A105N body, BC,Trim No. 1 (6) CHECK VALVES 2" and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 1 (6)






of 403


Line Class: 106CS1H Basic Material: H2 Serv. C.S. Max. Temperature: 232°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray



Notes 1" to 2" S-80

3" S-40 4” to 18” S-80



El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403


Line Class: 106CS2H Basic Material: H2 Serv. C.S. Max. Temperature: 232°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100% xray



Notes 1" to 2" S-160 3” to 18” S-80



El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403

10.10.9 Line Class: 206CS1H (to be only applied to hydrocracker)

Line Class: 206CS1H Basic Material: H2 Serv. C.S. Max. Temperature: 425°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 600 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray



Notes 1" to 2" S-80

3" S-40 4” to 18” S-80



El's Tees,




FLANGES 1" and above Class 600 Weldneck RTJ A105N B16.5 (8)


GASKETS Soft Iron Octagonal Ring B16.20

1½" and under Class 600 RTJ Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8

(6) GATE VALVES

2" and above Class 600 RTJ Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)

1½" and under Class 600 RTJ Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8

(6) GLOBE VALVES


(6) 1½" and under Class 600 RTJ Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 2" and above Class 600 RTJ Flanged A216-WCB body, BC, Trim No. 1 (6)






of 403


Line Class: 209CS1H Basic Material: H2 Serv. C. S. Max. Temperature: 425°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray



Notes

1" to 18" S-80 Seamless A106 Gr. B (1) (2) PIPE


El's Tees,



Weldolets All Buttweld A105N MSS-SP97 2½" and under Class 1500 FLANGES 3" and above Class 900

Weldneck RTJ A105N B16.5 (8)




(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403


Line Class: 209CS2H Basic Material: H2 Serv. C. S. Max. Temperature: 425°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100% xray



Notes

1" to 2" S-160 Seamless A106 Gr. B (1) (2)

3" to 18” S-80 PIPE


El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403


Line Class: 215CS1H Basic Material: H2 Serv. C. S. Max. Temperature: 425°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% Xray



Notes 1” to 6" S-160

8" to 10" S-140 12" to 14” S-160

16” S-140 18” S-160



El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403

10.10.13 Line Class: 103CS3H1 (to be only applied to hydrocracker)

Line Class: 103CS3H1 Basic Material: C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray



Notes 1½” S-XXS

2" to 3" S-160 4" to 6” S-80 8” to 10” S-60

12” to 14” S-XS 16” to 18” S-60



El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403


Line Class: 203CS2H1 Basic Material: C. S. H2 serv. Max. Temperature: 425°C Stress Relief: Per Code Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 300 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100% xray



Notes 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40



El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403





Notes 1½” S-XXS

2" to 3" S-160 4" to 6” S-120 8” to 18” S-100



El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403





Notes 1" to 1½” S-XXS 2" to 3” S-160 4” to 18” S-80



El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403


Line Class: 215CS1H1 Basic Material: C. S. H2 serv. Max. Temperature: 425°C Stress Relief: Per Code Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% Xray



Notes 1” to 6" S-160

8" to 10" S-140 12" to 14” S-160

16” S-140 18” S-160



El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403


Line Class: 215CS2H1 Basic Material: C. S. H2 serv. Max. Temperature: 425°C Stress Relief: Per Code Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100% Xray



Notes

Up to 18" S-160 Seamless A106 Gr. B (1) (2) PIPE


El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES








of 403

10.11 Carbon Steel for Jacketing Service Line Classes.


The following Notes shall apply to all of the carbon steel classes family and shall be considered as an integral part of the individual line class.

Notes:





(4) Seal Welding




(8) Flanges


(9) Threaded connections only allowed for caps and plugs.





of 403

10.11.2 Line Class: 101CS1J

Line Class: 101CS1J Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: External Jacketing Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code



¾" Sch 160 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20



(1) (2) (3)



Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 Fittings BW ends and cut in two halves (5)

Equal cross 2" and above Buttweld A234-Gr. WPB, ASME B16.9, cut in two halves


API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)

FLANGES 1½" and under Class 150 Socketweld RF A105N, B16.5 (8)







of 403

10.12 Galvanized Carbon Steel Line Classes


The following Notes are on hold (To be confirmed in final version).

The following Notes shall apply to all of this lined carbon steel class family and shall be considered as an integral part of the individual line class.

Notes: (To be confirmed for final revision)



Galvanizing shall be in accordance with JEMS-H-9115.


(3) Seamless or double-arc welded, full-penetration straight welds.

(4) Seal Welding






(7) Valve Trim


(8) Flanges


(10) Mechanical Joint

Refer to JERES-L-110 for approved mechanical joint joints such as dresser, positive seal coupling, LokRing type.

(11) Piping shall be hot-dip galvanized after fabrication. Shop fabrication shall be maximized and all flanged spools shall be hot-dip galvanized after fabrication. Valves shall not be galvanized.





of 403

10.12.2 Line Class: 301CG0W

Line Class: 301CG0W Basic Material: Galvan. CS / CS Max. Temperature: 100°C Stress Relief: Not required Service: Water Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code



2" and smaller 80 Smls, threaded API 5L Gr. B Galvanized 3" and 6" 40 Seamless API 5L Gr. B (11) PIPE

8" 0.25 in. min. Seamless API 5L Gr. B (11) NIPPLES 2" and smaller 80 Smls, threaded API 5L Gr. B Galvanized

2" and smaller Class 3000 ASME B16.11 A105N Galvanized THREADED

FITTINGS Swaged Nipples 2" and smaller Sch. 80 Smls, threaded ASTM A53-B Galv./API 5L-B Galv.

Bosses 2" and smaller Class 3000 Welding, threaded female outlet BUTT WELD

FITTINGS 3" - 8" Match pipe ASME B16.9 (11)

2" and smaller Dresser style No. 65-B or eqiuvelent (10) MECHANICAL JOINTS

Water Service only 3" - 8" Dresser style No. 38 (10)

FLANGES 3" and 8" Class 150 FF Weld Neck A105N, B16.5 (8) (11)

Blinds 4" - 8" Class 150 FF A105N, B16.5 Spec. Blinds 4" - 8" Flat Face AD-036631 or AD-036633 GASKETS 4" - 8" 1.6 mm Synthetic fiber

1¼" and smaller Mild steel machine bolts/ square heads and hex nuts to ASTM A307, Grade B

BOLTING 1½" and larger ASTM A193 B7 stud bolts, semi-finished,

heavy pattern ASTM A194 2H hex nuts

2" and smaller Class 800 Socketweld/ Threaded

ASTM A105N body, BB, OS&Y, API 602, Trim No.8

(6) GATE VALVES

3" and larger Class 150 FF Flanged ASTM A216-WCB body, BB, OS&Y, API 600, Trim No.8

(6)


ASTM A105N body, BB, OS&Y, Trim No.8

(6) GLOBE VALVES

3" and larger Class 150 FF Flanged ASTM A216-WCB body, BB, OS&Y, Trim No.8

(6)

2" and smaller Class 800 Socketweld/ Threaded ASTM A105N body, BC, Trim No.8 (6)

CHECK VALVES 3" and larger Class 150 FF Flanged ASTM A216-WCB body, BC, Trim No.1 (6)


ASTM A105N body, floating ball, RTFE seats, Trim No.10, fire safe

(6) (7)

3" and 4" Class 150 FF Flanged ASTM A216-WCB body, floating ball, RTFE seats, Trim No.10, fire safe

(6) (7) BALL VALVES

6" and larger Class 150 FF Flanged ASTM A216-WCB body, trunnion mounted, Trim ENP, fire safe

(6) (7)

BUTTERFLY VALVES 4" and larger 200 psig Wafer or lug Ductile Iron ASTM A395 body, API 609

Cat.A, Trim ENP






of 403

10.12.3 Line Class: 301CG1P

Line Class: 301CG1P Basic Material: C.S. & Galv. C.S. Max. Temperature: 100°C Stress Relief: Not required Service: Instrument air Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size Rating


2" and smaller 80 Smls, threaded API 5L Gr. B Galvanized 4" and 6" 40 Seamless API 5L Gr. B (11) PIPE 8" - 24" 0.25 in. min. Seamless API 5L Gr. B (11)

NIPPLES 2" and smaller 40 Smls, threaded API 5L Gr. B Galvanized


FITTINGS Swaged Nipples 2" and smaller Sch. 80 Smls, threaded ASTM A53-B Galv./API 5L-B Galv.

Bosses 2" and smaller Class 3000 Welding, threaded female outlet (AE-036175)

BUTT WELD FITTINGS 3" - 24" Match pipe ASME B16.9 (11)

2" and smaller Dresser style No. 65-B (10) MECHANICAL JOINTS


FLANGES 3" - 24" Class 150 FF Weld Neck A105N, B16.5 (8) (11)



BOLTING 1½" and larger ASTM A193 B7 stud bolts, semi-finished,

heavy pattern ASTM A194 2H hex nuts



(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)


(6) (7) BALL VALVES


(6) (7)


Cat.A, Trim ENP






of 403

10.12.4 Line Class: 301CG2P

Line Class: 301CG2P Basic Material: C.S. & Galv. C.S. Max. Temperature: 100°C Stress Relief: Not required Service: Service Air Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code



2" and smaller 80 Smls, threaded API 5L Gr. B Galvanized 4" and 6" 40 Seamless API 5L Gr. B (11) PIPE 8" - 24" 0.25 in. min. Seamless API 5L Gr. B (11)

NIPPLES 2" and smaller 80 Seamless API 5L Gr. B Galvanized


FITTINGS Swaged Nipples 2" and smaller Sch. 80 Seamless ASTM A53-B Galv./API 5L-B Galv.

Bosses 2" and smaller Class 3000 Welding, threaded female outlet (AE-036175)

BUTT WELD FITTINGS 3" - 24" Match pipe ASME B16.9 (11)

2" and smaller Dresser style No. 65-B (11) MECHANICAL JOINTS


FLANGES 3" and 6" Class 150 FF Weld Neck A105N, B16.5 (8) (11)



BOLTING

1½" and larger ASTM A193 B7 stud bolts, semi-finished, heavy pattern ASTM A194 2H hex nuts



(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)


(6) (7) BALL VALVES


(6) (7)


Cat.A, Trim ENP






of 403

10.13 Carbon Steel for Toxic and Benzene (<95% wt) Service Line Classes.



Notes:





(4) Valve leakage

All block valves shall satisfy the following:

• Tightness class: “B” according to ISO-15848, part I, table 1. Test fluid shall be helium (class BH)

• Endurance class: CO2 (1500 cycles)

• Temperature class: 400°C according to ISO-15848, part I, table 3.





(7) Valve Trim


(8) Flanges


(9) Minimum line size shall be of 1”.for line classes of 4.5 and 6.0 mm of corrosion allowance

(10) Surface Roughness shall be < 3.2 μm





of 403

10.13.2 Line Class: 101CS1X

Line Class: 101CS1X Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Toxic, Benzene (<95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25

Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code



¾" Sch 160 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20


(1) (2) PIPE

20” and above calculate Welded API 5L Gr. B (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS




API 5L Gr. B

Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N MSS SP 97


1½" and under Class 150 Socketweld RF SM (8)


SM

A105N, B16.5 (8)

BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10)

1½" and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.8

(6) GATE VALVES

2" and above Class 150 RF Flanged SM

A216-WCB body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 8

(6)

1½” and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, Trim No. 8

(6) GLOBE VALVES

2” and above Class 150 RF Flanged SM

A216-WCB body, BB, OS&Y, Live Loaded Sealing, Trim No. 8

(6) 1½” and under Class 800 Socketweld A105N body, BC, Trim No. 1 (6)

CHECK VALVES 2” and above Class 150 RF Flanged

SM A216-WCB body, BC, Trim No. 1 (6)


A105N body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe

(6) (7)

2” to 4” Class 150 RF Flanged SM

A216-WCB body, floating ball, RTFE seats, fire s., API 6D, Graphite Packing, Trim N.10

(6) (7) BALL VALVES


A216-WCB body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP

(6) (7)

BUTTERFLY VALVES 26” and above Class 150 RF Flanged

SM A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP (10)






of 403






¾" S-XXS 1” to 2” S-160 3" to 4” S-80

6" to 10” S-40 12" to 18” S-20


(1) (2) PIPE





API 5L Gr. B





SM

A105N, B16.5 (8)



(6) GATE VALVES



(6)

1½” and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, Trim No. 8

(6) GLOBE VALVES








(6) (7)



(6) (7) BALL VALVES



(6) (7)








of 403









(1) (2) (3)

1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 (4) FITTINGS El's Tees,




API 5L Gr. B

Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N MSS SP 97 (4)




SM

A105N, B16.5 (8)



(6) GATE VALVES



(6)

1½" and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, Trim No. 8

(6) GLOBE VALVES



(6) 1½" and under Class 800 Socketweld A105N body, BC, Trim No. 1 (6)

CHECK VALVES 2" and above Class 300 RF Flanged




(6) (7)

2" to 4" Class 300 RF Flanged SM


(6) (7) BALL VALVES



(6) (7)

BUTTERFLY VALVES 26" and above Class 300 RF Flanged







of 403






¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40



(1) (2) (3)





API 5L Gr. B





SM

A105N, B16.5 (8)



(6) GATE VALVES



(6)

1½" and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, Trim No. 8

(6) GLOBE VALVES








(6) (7)



(6) (7) BALL VALVES



(6) (7)








of 403

10.14 Carbon Steel for Highly Viscous Service Line Classes.



Notes:





(4) Seal Welding






(7) Valve Trim


(8) Flanges


(9) Minimum line size shall be of 1”.


(11) Valve jacket connection shall be from ½ to 1”, dipending on the valve size.

(12) Use not-jacketed plug valve when line is electrical traced.

(13) To be used only to connect oversized jackted plug valves.





of 403

10.14.2 Line Class: 101CS4V Line Class: 101CS4V Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Viscous Fluid Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Per Code



1” to 2" S-XXS 3" S-160 4" S-120 6” S-80

8” to 10” S-60 12” to 16” S-40

18” S-30


(1) (2) PIPE

20” and above Calculate Welded API 5L Gr B (3) FITTINGS El's Tees, Reducers

1" and above


Equal Cross 1" and above Buttweld A234 Gr. WPB, B16.9 Weldolets 1” and above Buttweld A 105N MSS SP 97

RED. SLIP ON FLANGES 1” and above Class 150 Slip on RF A105N, B16.5 (8)

(13)

FLANGES 1" and above Class 150 Weldneck RF A105N, B16.5 (8)


1½" and under Class 150 Oversized RF Flanged

A105N body, not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std. JACKETED

PLUG VALVES 2" and above Class 150 Oversized

RF Flanged

A216-WCB body, , not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std.

(6) (11)

1½" and under Class 150 RF Flanged A105N body, not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std. PLUG VALVES

2" and above Class 150 RF Flanged A216-WCB body, , not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std.

(6) (11) (12)






of 403

10.14.3 Line Class: 103CS4V Line Class: 103CS4V Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Viscous Fluid Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Per Code



Up to 2" S-XXS 3" S-160 4” S-120

6" to 8” S-80 10” to 18” S-60


(1) (2) PIPE

20” and above calculate Welded API 5L Gr B (3) FITTINGS El's Tees, Reducers

1" and above


Equal Cross 1" and above Buttweld A234 Gr. WPB, B16.9 Weldolets 1” and above Buttweld A 105N MSS SP 97

RED. FLANGES 1” and above Class 300 Slip on RF A105N, B16.5 (8) (13)

FLANGES 1" and above Class 300 Weldneck RF A105N, B16.5 (8)


1½" and under Class 300 Oversized RF Flanged

A105N body, not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std. JACKETED

PLUG VALVES 2" and above Class 300 Oversized

RF Flanged

A216-WCB body, , not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std.

(6) (11)

1½" and under Class 300 RF Flanged A105N body, not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std. PLUG VALVES

2" and above Class 300 RF Flanged A216-WCB body, , not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std.

(6) (11) (12)






of 403

10.15 Carbon Steel for Ammonium Bisulfide Service Line Classes


The following Notes shall apply to all of the steel classes family and shall be considered as an integral part of the individual line class.

Notes:



(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1. Fluid velocities shall be within the range of 10-20 ft/s (target 15 ft/s).



Schedule of fittings and weldneck flanges shall be same as the pipe. Dead legs shoul be avoided.



(6) Valve Trim


(7) Flanges



(9) For use at temperatures less than -29°C, the requirements of ASME B31.3 para. 323 shall be applied.

(10) Void.





of 403

10.15.2 Line Class: 103CH2N

Line Class: 103CH2N Basic Material: HIC Resist. C.S. Max. Temperature: 425°C Stress Relief: PWHT Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay



¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40




Couplings etc. 2" and above Buttweld

A234-Gr. WPB, B16.9 where applicable. Elbow shall have 5D

Radius (4)




1½" and under Class 300 Socketweld RF


A105N, B16.5 (7)




(6) GATE VALVES

2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, API 600, Trim No. 12

(6)



(6) GLOBE VALVES


(6)





(6) (7)


(6) (7) BALL VALVES


(6) (7)



(6)

PLUG VALVES


(6)








of 403





1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-60

12” to 14” S-XS 16” to 18” S-60






Radius (4)






A105N, B16.5 (7)




(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)


(6)(7) BALL VALVES


(6) (7)



(6)

PLUG VALVES


(6)






of 403





1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-60

12” to 14” S-XS 16” to 18” S-60






Radius (4)






A105N, B16.5 (7)

BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (6)

1½" and under (6) Socketweld with nipples


(6) GATE VALVES

2" and above (6)

RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(6)



(6) GLOBE VALVES

2" and above (6) RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12

(6)

1½" and under (6) Socketweld/ with nipples A105N body, BC,Trim No. 10 (6)

CHECK VALVES 2" and above (6) RF Flanged A216-WCB body, BC, Trim No. 10 (6)



(6) (7)

2" to 4" (6) RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10

(6) (7) BALL VALVES

6" and above (6) RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (7)

1½" and under (6) Socketweld

with nipples


(6)

PLUG VALVES

2" and above (6)

RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316

(6)






of 403

10.15.5 Line Class: 203CH3N (to be only applied to hydrocracker)

Line Class: 203CH3N Basic Material: HIC Resist. C.S. Max. Temperature: 425°C Stress Relief: PWHT Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 300 RTJ B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay



1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-60

12” to 14” S-XS 16” to 18” S-60






Radius (4)




1½" and under Class 300 Socketwd RTJ


A105N, B16.5 (7)

BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron octagonal ring, per B16.20.



(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)


CHECK VALVES 2" and above Class 300 RTJ Flanged A216-WCB body, BC, Trim No. 10 (6)



(6) (7)

2" to 4" Class 300 RTJ Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10

(6) (7) BALL VALVES

6" and above Class 300 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (7)



(6)

PLUG VALVES

2" and above Class 300 RTJ Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316

(6)






of 403


Line Class: 215CH3N Basic Material: HIC Resist. C.S. Max. Temperature: 425°C Stress Relief: PWHT Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay



Up to 6" S-XXS 8" to 18" S-160



1½" and under Class acc. to B16.11 Socketweld A105N B16.11 (4) FITTINGS


Couplings etc. 2” and above Buttweld


Radius (4)





(6)



(6)


(6) GLOBE VALVES

2" and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, Press. Seal., graphite packing, Trim No. 12

(6) 1½" and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 10 (6)

CHECK VALVES 2" and above Class 1500 RTJ Flanged A216-WCB body, Press. Seal., Trim No. 10

(6)






of 403

10.16 Low and Medium Alloys Steel for Process Services


The following Notes shall apply to all of this low and medium alloy steel classes family and shall be considered as an integral part of the individual line class.

Notes:





(4) Threaded connections only allowed downstream of vents, drains, hydrotest connections, and instrument take-offs. Threaded O'lets only allowed for thermowell and hydrotest connections.

(5) Gaskets

Spiral-wound gaskets shall have inner and outer ring. The inner shall be 316 SS.

(6) Minimum size shall be of 1” for line class with 4.5 and 6.0 mm of corrosion allowance.

(7) Void.





of 403

10.16.2 Line Class: 101CJ1P

Line Class: 101CJ1P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code



¾” S-160 1" to 2" S-80 3" to 10” S-40 12” to 18” S-20

Seamless A335 Gr. P11 (1) (2) PIPE

20” and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3)

1½" and under


Socketweld/ Threaded A182 Gr. F11, B16.11 (4)

FITTINGS


Couplings etc. 2" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9

Nipples and Swages 2" and under Seamless A335 Gr. P11


SP97 Socketweld/

Threaded A182 Gr. F11 Cl. 2,

MSS-SP97 (4)

Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97

1½" and under Class 150 Socketweld RF A182 Gr. F11 Cl. 2, B16.5 FLANGES

2" and above Class 150 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts



A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8


A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8


A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8

GLOBE VALVES 2" and above Class 150 RF Flanged A217 Gr. WC6, BB, OS&Y, graphite

packing, Trim No. 8


A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE

2" and above Class 150 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1






of 403





¾" S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 12” S-STD 14” to 16” S-40

18” S-XS


20" and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3)

1½" and under



FITTINGS





SP97 Socketweld/


MSS-SP97 (4)












packing, Trim No. 8









of 403





¾” S-XXS 1” to 2” S-160 3” to 6” S-80

8” to 18” S-60




Socketweld/ Threaded A182 Gr. F11, B16.11 (4) FITTINGS

El’s Tees,


2” and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9

Nipples and Swages 2” and under Seamless A335 Gr. P11


SP97 Socketweld/


MSS-SP97 (4)

Weldolets 2” and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97

1½” and under Class 600 Socketweld RF A182 Gr. F11 Cl. 2, B16.5 FLANGES

2” and above Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts








GLOBE VALVES 2” and above Class 600 RF Flanged A217 Gr. WC6, BB, OS&Y, graphite

packing, Trim No. 8



2” and above Class 600 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1






of 403

10.16.5 Line Class: 106CJ1P1

Line Class: 106CJ1P1 Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code



¾" S-XXS 1” to 2” S-160 3” to 6” S-80

8” to 18” S-60



1½" and under Class acc. to B16.11 Socketweld/ Threaded A182 Gr. F11, B16.11 (4) FITTINGS

El's Tees,


2" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9



SP97 Socketweld/


MSS-SP97 (4)







GATE VALVES

2" and above Class 600 RF Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12




packing, Trim No. 12









of 403





¾” S-XXS 1” to 2” S-160

3” to 18” S-80 Seamless A335 Gr. P11 (1)

(2) PIPE


1½” and under

Class acc. To

B16.11


FITTINGS


Couplings etc. 2” and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9



SP97 Socketweld/


MSS-SP97 (4)


1½” and under Class 600 Socketweld RF A182 Gr. F11 Cl. 2, B16.5 FLANGES

2” and above Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts








GLOBE VALVES 2” and above Class 600 RF Flanged A217 Gr. WC6, BB, OS&Y, graphite

packing, Trim No. 8



2” and above Class 600 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1






of 403





1” to 2” S-XXS 3” to 4” S-160 6” to 8” S-120

10” to 18” S-100


20" and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3) FITTINGS

El's Tees,


1" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9 (4)


FLANGES 1" and above Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts


1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8



1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8


packing, Trim No. 8

1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE







of 403


Line Class: 209CJ4P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code



1” to 2” S-XXS 3” to 4” S-160 6” to 8” S-120

10” to 18” S-100



El's Tees,




FLANGES 1" and above Class 900 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal Ring B16.10

2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8



2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8

GLOBE VALVES 3" and above Class 900 RTJ Flanged A217 Gr. WC6, BB, OS&Y, graphite

packing, Trim No. 8

2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE

3" and above Class 900 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1






of 403

10.16.9 Line Class: 103CK1P

Line Class: 103CK1P Basic Material: 2.25 Cr – 1.0 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code



¾" S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 12” S-STD 14” to 16” S-40

18” S-XS



1½" and under



FITTINGS





SP97 Socketweld/


MSS-SP97 (4)












packing, Trim No. 8









of 403

10.16.10 Line Class: 101CL2P Line Class: 101CL2P Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: per Code



¾" S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 12” S-STD 14” to 16” S-40

18” S-XS


20" and above calculate Welded A691 Gr. 5Cr Cl. 22 (3)

1½" and under



FITTINGS


Couplings etc. 2" and above Buttweld A234 Gr. WP5 Seamless/Welded, B16.9



SP97 Socketweld/

Threaded A182 Gr. F5, MSS-SP97 (4)

Weldolets 2" and above Buttweld A182 Gr. F5, MSS-SP97

1½" and under Class 150 Socketweld RF A182 Gr. F5, B16.5 FLANGES

2" and above Class 150 Weldneck RF A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts up to 510°C.



A182 Gr. F5 body, BB, OS&Y, graphite packing, API 602, Trim No. 8


A217 Gr. C5 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8


A182 Gr. F5 body, BB, OS&Y, graphite packing, Trim No. 8

GLOBE VALVES 2" and above Class 150 RF Flanged A217 Gr. C5, BB, OS&Y, graphite

packing, Trim No. 8

1½" and under Class 800 Socketweld with nipples A182 Gr. F5 body, BC,Trim No. 1 CHECK VALVE

2" and above Class 150 RF Flanged A217 Gr. C5 body, BC, Trim No. 1






of 403




1” to 2” S-XXS 3” S-160 4” S-120 6” S-80

8” to 10” S-60 12” to 16” S-40

18” S-30


20" and above calculate Welded A691 Gr. 5Cr Cl. 22 (3) FITTINGS

El's Tees,


1" and above Buttweld A234 Gr. WP5 Seamless/Welded, B16.9


FLANGES 1" and above Class 150 Weldneck RF A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts.

GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20. (5)

1½" and under Class 150 RF Flanged A182 Gr. F5 body, BB, OS&Y, graphite packing, API 602, Trim No. 8



1½" and under Class 150 RF Flanged A182 Gr. F5 body, BB, OS&Y, graphite packing, Trim No. 8


packing, Trim No. 8

1½" and under Class 150 RF Flanged A182 Gr. F5 body, BC,Trim No. 1 CHECK VALVE 2" and above Class 150 RF Flanged A217 Gr. C5 body, BC, Trim No. 1






of 403




Up to 2” S-160 3” to 4” S-80

6” to 14” S-60 16” to 18” S-40



1½" and under



FITTINGS





SP97 Socketweld/




2" and above Class 300 Weldneck RF A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)








packing, Trim No. 8








of 403




Up to 2” S-160 3” to 6” S-80

8” to 10” S-60 12” S-XS

14” to 18” S-60



1½" and under



FITTINGS





SP97 Socketweld/












packing, Trim No. 8








of 403




Up to 1½” S-XXS 2” to 3” S-160

4” S-120 6” to 8” S-80

10” to 18” S-60



El's Tees,


1" and above Buttweld A234 Gr. WP5 Seamless/Welded, B16.9 (4)


FLANGES 1" and above Class 300 Weldneck RF A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)


GATE VALVES 2" and above

Class 300 RF Flanged A217 Gr. C5 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8



packing, Trim No. 8







of 403

10.16.15 Line Class: 225CL2P Line Class: 225CL2P Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray

Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 430.9 386.2 335.3 281.8 100.4 60,7


Up to 4” S-XXS 6” to 8” calculate



El's Tees,




FLANGES 1" and above Class 2500 Weldneck RTJ A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS 5 Cr octagonal ring, B16.20

1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WB, OS&Y, graphite packing, API 602, Trim No. 8


A217 Gr. C5 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 8

1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WB, OS&Y, graphite packing, Trim No. 8

GLOBE VALVES 2" and above Class 2500 RTJ Flanged A217 Gr. C5, PSB, OS&Y, graphite

packing, Trim No. 8

1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WC,Trim No. 1 CHECK VALVE 2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, PSC, Trim No. 1






of 403

10.16.16 Line Class: 225CL2P1 Line Class: 225CL2P1 Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray



Up to 4” S-XXS 6” to 8” calculate



El's Tees,




FLANGES 1" and above Class 2500 Weldneck RTJ A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS 5 Cr octagonal ring, B16.20

1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WB, OS&Y, graphite packing, API 602, Trim No. 12

GATE VALVES

2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12

1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WB, OS&Y, graphite packing, Trim No. 12

GLOBE VALVES 2" and above Class 2500 RTJ Flanged A217 Gr. C5, PSB, OS&Y, graphite

packing, Trim No. 12

1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WC,Trim No. 10 CHECK VALVE 2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, PSC, Trim No. 10






of 403

10.16.17 Line Class: 101CM2P Line Class: 101CM2P Basic Material: 9 Cr – 1.0 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: per Code



1½" S-XXS 2” to 3” S-160 4” to 6” S-120

8” S-100 10” to 14” S-XS 16” to 18” S-60



1½" and under



FITTINGS





SP97 Socketweld/












packing, Trim No. 8








of 403




1½" to 2” S-XXS 3” to 6” S-160

8” S-120 10” to 18” S-60



1½" and under



FITTINGS





SP97 Socketweld/












packing, Trim No. 8








of 403




Up to 2" S-XXS 3" S-160 4" S-120 6” S-80

8” to 10” S-60 12” to 16” S-40

18” S-30


20” and above Calculate Welded A691 Gr. 9Cr Cl. 22 (3) FITTINGS

El's Tees,




FLANGES 1" and under Class 150 Weldneck RF A182 Gr. F9, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)






packing, Trim No. 8







of 403




1½" S-XXS 2” to 3” S-160 4” to 6” S-120

8” S-100 10” to 14” S-XS 16” to 18” S-60



1½" and under



FITTINGS





SP97 Socketweld/












packing, Trim No. 8








of 403




1½" to 2” S-XXS 3” to 6” S-160

8” S-120 10” to 18” S-60



1½" and under



FITTINGS





SP97 Socketweld/












packing, Trim No. 8








of 403




1" to 2” S-XXS 3” S-160 4” S-120

6” to 8” S-80 10” to 18” S-60



El's Tees,




FLANGES 1" and under Class 300 Weldneck RF A182 Gr. F9, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)






packing, Trim No. 8







of 403




1½" S-XXS 2” to 3” S-160 4” to 6” S-120

8” S-100 10” to 14” S-XS 16” to 18” S-60



1½" and under



FITTINGS





SP97 Socketweld/












packing, Trim No. 8








of 403




1½" to 2” S-XXS 3” to 6” S-160

8” S-120 10” to 18” S-60



1½" and under



FITTINGS





SP97 Socketweld/












packing, Trim No. 8








of 403


Line Class: 201CJ1P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: per Code Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code



¾” S-160 1" to 2" S-80 3" to 10” S-40 12” to 18” S-20



1½" and under



FITTINGS





SP97 Socketweld/


MSS-SP97 (4)


1½" and under Class 150 Socketweld RTJ A182 Gr. F11 Cl. 2, B16.5 FLANGES

2" and above Class 150 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal Ring B16.10








packing, Trim No. 8









of 403

10.16.26 Line Class: 203CJ1P Line Class: 203CJ1P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: per Code Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code



1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-30



1½" and under



FITTINGS





SP97 Socketweld/


MSS-SP97 (4)


1½" and under Class 300 Socketweld RTJ A182 Gr. F11 Cl. 2, B16.5 FLANGES

2" and above Class 300 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal Ring B16.10








packing, Trim No. 8









of 403


Line Class: 206CJ1P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: per Code Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code



1” to 2” S-160 3” to 6” S-80


(2) PIPE


1½” and under

Class acc. To

B16.11


FITTINGS


Couplings etc. 2” and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9



SP97 Socketweld/


MSS-SP97 (4)


1½” and under Class 600 Socketweld RTJ A182 Gr. F11 Cl. 2, B16.5 FLANGES

2” and above Class 600 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal Ring B16.10







GLOBE VALVES 2” and above Class 600 RTJ Flanged A217 Gr. WC6, BB, OS&Y, graphite

packing, Trim No. 8



2” and above Class 600 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1






of 403

10.17 Low and Medium Alloys Steel for Hydrogen Services



Notes:





(4) Seal Welding







(7) Valve Trim


(8) Flanges



(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm.





of 403

10.17.2 Line Class: 101CJ1H

Line Class: 101CJ1H Basic Mat.: 1.25 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray





20” and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS

El's Tees,


All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)

Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5

FLANGES All Class 150 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 (8)

BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts


1½" and under Class 150 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8 (6)


A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)

1½" and under Class 150 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 8

(6) GLOBE VALVES

2" and above Class 150 RF Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8

(6)

1½" and under Class 150 RF Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1

(6) CHECK VALVES

2" and above Class 150 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)






of 403


Line Class: 103CJ1H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray






El's Tees,







1½" and under Class 300 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8

(6) GATE VALVES

2" and above Class 300 RF Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES







of 403

10.17.4 Line Class: 103CJ1H1 (to be only applied to hydrocracker)

Line Class: 103CJ1H1 Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray






El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES







of 403





Notes 1” to 2” S-160 3” to 4” S-80

6” to 12” S-STD 14” to 16” S-40

18” S-XS


20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS

El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES







of 403





Notes 1” to 2” S-160 3” to 6” S-80


(2) PIPE


El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES







of 403





Notes 1” to 2” S-160


(2) PIPE 20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3)

FITTINGS


etc.







(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES







of 403





Notes 1” to 2” S-XXS 3” to 4” S-160 6” to 8” S-120

10” to 18” S-100



El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES







of 403


Line Class: 209CJ1H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray





(2) PIPE 20” and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3)

FITTINGS


etc.


Weldolets 2” and above Buttweld A182 Gr. F11 Cl. 2, B16.5

2½” and under Class 1500

FLANGES

3” and above Class 900

Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (8)


GASKETS 5Cr Octagonal Ring, B16.20

2½” and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No.8

(6) GATE VALVES

3” and above Class 900 RTJ Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)

2½” and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing,Trim No. 8

(6) GLOBE VALVES

3” and above Class 900 RTJ Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8

(6)

2½” and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WC, Trim No. 1

(6) CHECK VALVES

3” and above Class 900 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)






of 403


Line Class: 215CJ1H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%X-ray



Notes

1” to 18” S-160 Seamless A335 Gr. P11 (1) (2) PIPE


El's Tees,




FLANGES All Class 1500 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (8)



1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No.8

(6) GATE VALVES

2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 8

(6)

1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing,Trim No. 8

(6) GLOBE VALVES

2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, PSB, OS&Y, graphite packing, Trim No. 8

(6)

1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WC, Trim No. 1

(6) CHECK VALVES

2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, PSC, Trim No. 1 (6)






of 403


Line Class: 215CJ1H1 Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%X-ray



Notes


20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS El's Tees,


1" and above Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)






(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES

2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, PSC, Trim No. 10

(6)






of 403


Line Class: 225CJ1H1 Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray




8” to 18” calculate Seamless A335 Gr. P11 (1)

(2) PIPE 20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3)

FITTINGS El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES


(6)






of 403

10.17.13 Line Class: 103CK1H

Line Class: 103CK1H Basic Material: 2.25 Cr – 1.0 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code


Item

Size

Rating Schedule

Type

Specification

Notes

1” to 2” S-80 3” to 6” S-40

8” S-20 10” to 14” S-30

16” S-40 18” S-30

Seamless

A335 Gr. P22 (1)

(2) PIPE


El's Tees,




FLANGES 1" and above Class 300 Weldneck RF A182 Gr. F22 Cl. 3, B16.5 (8) BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)


(6) GATE VALVES


(6)


(6) GLOBE VALVES

2" and above Class 300 RF Flanged A217 Gr. WC9, BB, OS&Y, graphite packing, Trim No. 8

(6)


(6) CHECK VALVE







of 403

10.17.14 Line Class: 225CL2H1 (to be only applied to hydrocracker)

Line Class: 225CL2H1 Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay




8” to 18” calculate Seamless A335 Gr. P5 (1)

(2) PIPE 20" and above calculate Welded A691 Gr. 5Cr Cl. 42 (3)

FITTINGS El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES

2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, PSB, OS&Y, graphite packing, Trim No. 12

(6)


(6) CHECK VALVES

2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, PSC, Trim No. 10 (6)






of 403

10.17.15 Line Class: 203CJ1H Line Class: 203CJ1H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray



Notes 1” to 2” S-160 3” to 4” S-80

6” to 12” S-STD 14” to 16” S-40

18” S-XS



El's Tees,






GASKETS 5 Cr Octagonal Ring B16.10

1½" and under Class 300 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8

(6) GATE VALVES

2" and above Class 300 RTJ Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)

1½" and under Class 300 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 8

(6) GLOBE VALVES

2" and above Class 300 RTJ Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8

(6)

1½" and under Class 300 RTJ Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1

(6) CHECK VALVES

2" and above Class 300 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)






of 403

10.17.16 Line Class: 206CJ1H Line Class: 206CJ1H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray



Notes 1” to 2” S-160 3” to 6” S-80


(2) PIPE


El's Tees,






GASKETS 5 Cr Octagonal Ring B16.10

1½" and under Class 600 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8

(6) GATE VALVES


(6)

1½" and under Class 600 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 8

(6) GLOBE VALVES

2" and above Class 600 RTJ Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8

(6)

1½" and under Class 600 RTJ Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1

(6) CHECK VALVES

2" and above Class 600 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)






of 403

10.18 Low and Medium Alloys Steel for Sour Services



Notes:









(6) Valve Trim


(7) Flanges




(10) Void.





of 403

10.18.2 Line Class: 103CJ1S

Line Class: 103CJ1S Basic Material: Sour 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT

Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray



1" to 2" Sch 80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS

Seamless

A335 Gr. P11 (1)

(2) PIPE

20” and above calculated Welded A691 Gr. 1.25Cr Cl. 22 (3) 1½" and under Class acc. to B16.11 Socketweld A182 Gr. F11 Cl. 2, B16.11 FITTINGS

El's Tees, Reducers, Caps, et 2" and above Buttweld A234-Gr. WP11 Cl. 1, B16.9 (4)

Nipples and Swage 2" and under Seamless A335 Gr. P11




2" and above Class 300 Weldneck RF A182 Gr. F11 Cl. 2, B16.5

(7) BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts

GASKETS Metal grooved gasket with flexible graphite layer is preferred. Or, spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. Inner ring 316


A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.12 (5)


A217-WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)



(5) GLOBE VALVES

2" and above Class 300 RF Flanged A217-WC6 body, BB, OS&Y, graphite packing, Trim No. 12

(5)


A182 Gr. F11 Cl. 2 body, BC,Trim No. 10

(5) CHECK VALVES

2" and above Class 300 RF Flanged A217-WC6 body, BC, Trim No. 10 (5) 1½" and under Class 300 Socketweld

with nipples A182 Gr. F11 Cl. 2 body, floating ball, RTFE seats, Trim No. 10, fire safe (6) (5)

2" to 4" Class 300 RF Flanged A217-WC6 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) (5) BALL VALVES

6" and above Class 300 RF Flanged A217-WC6 body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6) (5)


A182 Gr. F11 Cl. 2 body, lubricated, inverted pressure balanced, BC Trim SS 316

(5)

PLUG VALVES

2" and above Class 300 RF Flanged A217-WC6 body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316

(5)

BUTTERFLY VALVES 4" and above Class 300 RF Flanged A217-WC6 body, high performance, fire-

safe, API 609 Cat. B,Trim No. 10






of 403



Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%XRay



1" to 2" S-80 3" S-40

4” to 18” S-80

Seamless

A335 Gr. P11 (1)

(2) PIPE



Couplings etc. 2" and above Buttweld A234-Gr. WP11 Cl. 1, B16.9 (4)









A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.12

(5) GATE VALVES

2" and above Class 600 RF Flanged A217-WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)



(5) GLOBE VALVES


(5)



(5) CHECK VALVES


with nipples A182 Gr. F11 Cl. 2 body, floating ball, RTFE seats, Trim No. 10, fire safe (5) (6)





(5)

PLUG VALVES


(5)

BUTTERFLY VALVES 4" and above Class 600 RF Flanged A217-WC6 body, high performance,







of 403






1” to 2” S-160

3” to 18” S-80

Seamless

A335 Gr. P11 (1)

(2) PIPE


El's Tees, Reducers, Caps, et 2" and above Buttweld A234-Gr. WP11 Cl. 1, B16.9 (4)









A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.12

(5)

GATE VALVES

2" and above Class 600 RF Flanged A217-WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)



(5) GLOBE VALVES


(5)



(5) CHECK VALVES


with nipples A182 Gr. F11 Cl. 2 body, floating ball, RTFE seats, Trim No. 10, fire s. (5) (6)





(5)

PLUG VALVES


(5)

BUTTERFLY VALVES 4" and above Class 600 RF Flanged A217-WC6 body, high performance,







of 403






1” to 2” S-XXS 3” to 4” S-160 6” to 8” S-120

10” to 18” S-100


20” and above calculated Welded A691 Gr. 1.25Cr Cl. 22 (3) FITTINGS

El's Tees,


1" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless, B16.9 (4)


FLANGES 1" and above Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 (7) BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts



(5)

GATE VALVES

2" and above Class 600 RF Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12

(5)


(5) GLOBE VALVES

2" and above Class 600 RF Flanged A217 Gr. WC6, BB, OS&Y, graphite packing, Trim No. 12

(5)


(5) CHECK VALVE

2" and above Class 600 RF Flanged A217 Gr. WC6 body, BC, Trim No. 10 (5) Notes: Notes (1) through (10) of 10.18.1 shall apply.





of 403



Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay



1” to 2” S-160 3” to 18” S-80



El's Tees,




2½" and under Class 1500 FLANGES 3" and above Class 900

Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (7)

BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal ring, per B16.20

2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No. 12

(5)

GATE VALVES

3" and above Class 900 RTJ Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12

(5)

2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, Trim No. 12

(5) GLOBE VALVES

3" and above Class 900 RTJ Flanged A217 Gr. WC6, BB, OS&Y, graphite packing, Trim No. 12

(5)


(5) CHECK VALVE

3" and above Class 900 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 10 (5) Notes: Notes (1) through (10) of 10.18.1 shall apply.





of 403






1” to 2” S-160 3” to 18” S-80



El's Tees,




2½" and under Class 1500 Weldneck RTJ FLANGES 3" and above Class 900 Weldneck RTJ

A182 Gr. F11 Cl. 2, B16.5 (7)



(5)

GATE VALVES


(5)


(5) GLOBE VALVES


(5)


(5) CHECK VALVE






of 403






1” to 2” S-XXS 3” to 4” S-160 6” to 8” S-120

10” to 18” S-100



El's Tees,




2½" and under Class 1500 Weldneck RTJ FLANGES 3" and above Class 900 Weldneck RTJ

A182 Gr. F11 Cl. 2, B16.5 (7)



(5)

GATE VALVES


(5)


(5) GLOBE VALVES


(5)


(5) CHECK VALVE






of 403



Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%X-ray





El's Tees,




FLANGES 1" and above Class 1500 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (7)



(5)

GATE VALVES


(5)


(5) GLOBE VALVES

2" and above Class 1500 RTJ Flanged A217 Gr. WC6, PSB, OS&Y, graphite packing, Trim No. 12

(5)


(5) CHECK VALVE


(5)






of 403



Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray



1” to 6” S-160 8” to 18” calculate



El's Tees,







(5) GATE VALVES


(5)


(5) GLOBE VALVES

2" and above Class 2500 RTJ Flanged A217 Gr. WC6, PSB, OS&Y, graphite packing, Trim No. 12

(5)


(5) CHECK VALVE


(5)






of 403

10.18.11 Line Class: 225CL2S

Line Class: 225CL2S Basic Material: Sour 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT

Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay



Up to 4” S-XXS PIPE 6” to 8” calculate

Seamless A335 Gr. P5 (1) (2)

FITTINGS


etc.






(5)

GATE VALVES


(5)


(5) GLOBE VALVES

2" and above Class 2500 RTJ Flanged A217 Gr. C5, PSB, OS&Y, graphite packing, Trim No. 12

(5)


(5) CHECK VALVE

2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, PSC, Trim No. 10 (5) Notes: Notes (1) through (11) of 10.18.1 shall apply.





of 403

10.19 Low and Medium Alloy Steel for Toxic and Benzene (<95% wt) Service Line Classes.



Notes:





(4) Valve leakage









(7) Valve Trim


(8) Flanges








of 403

10.19.2 Line Class: 103CK1X Line Class: 103CK1X Basic Material: 2.25 Cr – 1.0 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Toxic, Benzene (<95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25

Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code



¾" S-XXS 1” to 2” S-160 3” to 4” S-80

6” to 12” S-STD 14” to 16” S-40

18” S-XS


20" and above calculate Welded A691 Gr. 2.25Cr Cl. 22 (3) 1½" and under Class acc. to B16.11 Socketweld A182 Gr. F22, B16.11 FITTINGS


Couplings etc. 2" and above Buttweld A234 Gr. WP22 Cl. 1

Seamless/Welded, B16.9 (5)

Nipples, Swages 2" and under Seamless A335 Gr. P22

Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A182 Gr. F22 Cl. 3, MSS SP 97

Weldolets 2" and above Buttweld A182 Gr. F22 Cl. 3MSS SP 97 1½" and under Class 300 Sockwd RFS FLANGES 2" and above Class 300 Weldnck RFS

A182 Gr. F22 Cl. 3, B16.5 (8)

BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts.

GASKETS Metal grooved gasket with flexible graphite layer is preferred. Or, spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. Inner ring 316 (10)


A182 Gr. F22 Cl. 3 body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.8

(6) GATE VALVES


A217 Gr. WC9 body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 8

(6)


A182 Gr. F22 Cl. 3 body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.8

(6) GLOBE VALVES


A217 Gr. WC9 body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 8

(6)


A182 Gr. F22 Cl. 3 body, BC, Trim No. 1

(6) CHECK VALVES

2" and above Class 300 RF Flanged SM A217 Gr. WC9 body, BC, Trim No. 1 (6)


A182 Gr. F22 Cl. 3 body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe

(6) (7)


A217 Gr. WC9 body, floating ball, RTFE seats, fire safe, API 6D,Graphite Packing, Trim No. 10

(6) (7) BALL VALVES


A217 Gr. WC9 body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP

(6) (7)






of 403

10.20 Steel for High Temperature Services Line Classes


The following Notes shall apply to all of this high alloys steel class family and shall be considered as an integral part of the individual line class.

Notes:





(4) Seal Welding






(7) Valve Trim


(8) Flanges






of 403

10.20.2 Line Class 101LR1T Line Class: 101LR1T Basic Material: Refract. Lined

Carbon Steel Max. Temperature: 770°C Stress Relief: Per Code

Service: High Temperature Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size I.D. Rating


PIPE Up to 1900 calculate JERES-N-100 A106 Gr. B Refractory lined FITTINGS

El's, Tees,

6" and above Buttweld A234 Gr. WPB Refractory lined (5)

FLANGES 6" and above Class 150 Weldneck RF A105N Refractory lined, B16.5 (8) BOLTING A193 G. B7 stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2H GASKETS Spiral-wound, 304H windings, vermiculite filled with 304H ring, per B16.20. 304H Inner Ring

RF Flanged A182 Gr. F304H body, BB, OS&Y, API 602, Trim No. 304H (6)

GATE VALVES All Class 150 RF Flanged

A351 CF8C body, Wedge type: BB, OS&Y, API 600, Trim 304H

(6)






of 403

10.20.3 Line Class 103LR1T

Line Class: 103LR1T Basic Material: Refract. Lined Carbon Steel Max. Temperature: 770°C Stress Relief: Per Code

Service: High Temperature Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size I.D. Rating Schedule Type Specification Notes

PIPE Up to 1900 calculate JERES-N-100 A106 Gr. B Refractory lined FITTINGS

El's, Tees,

6" and above Buttweld A234 Gr. WPB Refractory lined (5)

FLANGES 6" and above Class 300 Weldneck RF A105N Refractory lined, B16.5 (8) BOLTING A193 G. B7 stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2H GASKETS Spiral-wound, 304H windings, vermiculite filled with 304H ring, per B16.20. 304H Inner Ring

RF Flanged A182 Gr. F304H body, BB, OS&Y, API 602, Trim No. 304H (6)

GATE VALVES All Class 300 RF Flanged

A351 CF8C body, Wedge type: BB, OS&Y, API 600, Trim 304H

(6)






of 403

10.21 Stainless Steel for Process Service Line Classes


The following Notes shall apply to all of this stainless steel class family and shall be considered as an integral part of the individual line class.

Notes:





(4) Seal Welding






(7) Valve Trim


(8) Flanges



(10) Void.





of 403

10.21.2 Line Class: 101SA0P

Line Class: 101SA0P Basic Material: SS 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code



Notes

Up to 6" S-40S

Seamless

A312 Gr. TP304/304L (1) (2) PIPE

8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)

1½” and under Socketweld/ Threaded A182 Gr. F304/304L, B16.11 (5) FITTINGS


Couplings etc. 2” and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (5)

Nipples and Swage 2” and under Seamless A312 Gr. TP304/304L Sockolets/

Threadolets 1½” and under Socketweld/ Threaded A182 Gr. F304/304L, MSS-SP97 (4)

Weldolets 2” and above Buttweld A182 Gr. F304/304L, MSS-SP97

1½” and under Class 150 Socketweld RF A182 Gr. F304/304L, B16.5

FLANGES 2” and above Class 150 Weldneck RF A182 Gr. F304/304L, B16.5

(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-w., 316 SS windings, flex graphite filled with CS outer ring and SS 316 inner ring per B16.20.

1½” and under Class 800 Socketweld / Threaded

A182 Gr. F304/304L body, BB, OS&Y, graphite packing, API 602,Trim No. 12 (6)


A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(6)


A182 Gr. F304/304L body, BB, OS&Y, graphite packing,Trim No. 12 (6)

GLOBE VALVES 2” and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite


1½” and under Class 800 Socketweld/ Threaded A182 Gr. F304/304L body, BC, Trim No. 10 (6) CHECK VALVES

2” and above Class 150 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10 (6)


A182-F304/304L body, floating ball, RTFE seats, Trim No. 10, fire safe (6)

2” to 4” Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) (7) BALL VALVES

6” and above Class 150 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6) (7)


A182-F304L/304 body, lubricated, inverted pressure balanced, BC, Trim SS 316

(6) PLUG VALVES

2” and above Class 150 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced,API 599, Trim SS 316 (6)


Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10






of 403




Notes Notes (1) through (10) of 10.21.1 shall apply.


Notes

Up to 6"

Seamless

A312 Gr. TP304/304L (1)

(2) PIPE

8" and above Welded A358 Gr. 304/304L Cl. 1 (3)

1½" and under 3000 Socketweld/ Threaded A182 Gr. F304/304L, B16.11 (5) FITTINGS


Couplings etc. 2" and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (5)

Nipples and Swage 2" and under Seamless A312 Gr. TP304/304L Sockolets/

Threadolets 1½" and under Socketweld/ Threaded A182 Gr. F304/304L, MSS-SP97 (4)

Weldolets 2" and above Buttweld A182 Gr. F304/304L, MSS-SP97

1½" and under Class 150 Socketweld RF A182 Gr. F304/304L, B16.5

FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F304/304L, B16.5


1½" and under Class 800 Socketweld / Threaded




(6)



GLOBE VALVES 2" and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite



A182 Gr. F304/304L body, BC, Trim No. 10 (6) CHECK VALVES

2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10 (6)


A182-F304/304L body, floating ball, RTFEseats,Trim No. 10, fire safe (6) (7)

2" to 4" Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) (7) BALL VALVES

6" and above Class 150 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6) (7)


A182-F304L/304 body, lubricated, inverted pressure balanced, BC,Trim SS 316

(6) PLUG VALVES

2" and above Class 150 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced,API 599, Trim SS 316 (6)







of 403

10.21.4 Line Class: 103SA0P Line Class: 103SA0P Basic Material: SS 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code



Up to 6" S-40S

Seamless

A312 Gr. TP304/304L (1) (2) PIPE

8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)

1½" and under

3000

Socketweld/ Threaded A182 Gr. F304/304L, B16.11 (5) FITTINGS








(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.





(6)







2" and above Class 300 RF Flanged A351 Gr. CF8M body, BC, Trim No.10 (6)


A182-F304/304L body, floating ball, RTFE seats,Trim No. 10, fire safe (6) (7)

2" to 4" Class 300 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6) (7) BALL VALVES

6" and above Class 300 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D,Trim No. 10 (6) (7)



(6)

PLUG VALVES

2" and above Class 300 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316

(6)








of 403





Up to 6"

Seamless

A312 Gr. TP304/304L (1)

(2) PIPE

8" and above Welded A358 Gr. 304/304L Cl. 1 (3)

1½" and under

3000











A182 Gr. F304/304L body, BB, OS&Y, graphite packing, API 602, Trim No.12 (6)



(6)







2" and above Class 300 RF Flanged A351 Gr. CF8M body, BC,Trim No. 10 (6)


A182-F304/304L body, floating ball, RTFE seats, Trim No. 10, fire safe (6) (7)

2" to 4" Class 300 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6)(7) BALL VALVES




(6)

PLUG VALVES


(6)








of 403




Item

Size

Rating Schedule

Type

Specification

Notes

Up to 6" S-40S

Seamless

A312 Gr. TP304/304L (1) (2)

8" to 24” S-40S

PIPE

26” and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)

1½" and under











A182 Gr. F304/304L body, BB, OS&Y, graphite packing,API 602, Trim No. 12 (6)

GATE VALVES 2" and above Class 600 RF Flanged A351 Gr. CF8M body, BB, OS&Y,

graphite packing, API 600, Trim No. 12 (6)







2" and above Class 600 RF Flanged A351 Gr. CF8M body, BC, Trim No.10 (6)


A182-F304/304L body, floating ball, RTFE seats, Trim No. 10, fire safe (6) (7)





(6)

PLUG VALVES


(6)








of 403


Line Class: 209SA1P Basic Material: SS 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification

Notes

Up to 6" S-40S

Seamless

A312 Gr. TP304/304L (1) (2)

PIPE 8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)

1½" and under

Socketweld A182 Gr. F304/304L, B16.11 (5) FITTINGS El's Tees,

Reducers, Caps, Couplings etc. 2" and above Buttweld A403 Gr. WP304/304L


Nipples and Swages 2" and under Seamless A312 Gr. TP304/304L

Sockolets 1½" and under Socketweld A182 Gr. F304/304L, MSS-SP97 Weldolets 2" and above Buttweld A182 Gr. F304/304L, MSS-SP97

2½" and under Class 1500 Weldneck RTJ A182 Gr. F304/304L, B16.5 FLANGES

3" and above Class 900 Weldneck RTJ A182 Gr. F304/304L, B16.5 (8)

BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS 316 SS octagonal ring

2½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WB, OS&Y, graphite packing,API 602, Trim No. 12

(6)

GATE VALVES

3" and above Class 900 RTJ Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(6)

2½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WB, OS&Y, graphite packing,Trim No. 12

(6) GLOBE VALVES

3" and above Class 900 RTJ Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12

(6)

2½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WC, Trim No. 10

(6) CHECK VALVES

3" and above Class 900 RTJ Flanged A351 Gr. CF8M body, BC, Trim No.10 (6) Notes: Notes (1) through (10) of 10.21.1 shall apply.





of 403


Line Class: 225SA1P Basic Material: SS 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray


Item

Size Rating

Schedule

Type

Specification

Notes

Up to 6" calculate

Seamless

A312 Gr. TP304/304L (1) (2) PIPE

8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3) FITTINGS El's Tees,


1" and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (5)


FLANGES 1" and above Class 2500 Weldneck RTJ A182 Gr. F304/304L, B16.5 (8)


1½" and under Class 2500 RTJ Flanged A182 Gr. F304/304L body, WB, OS&Y, graphite packing,API 602, Trim No. 12

(6)

GATE VALVES

2" and above Class 2500 RTJ Flanged A351 Gr. CF8M body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12

(6)

1½" and under Class 2500 RTJ Flanged A182 Gr. F304/304L body, WB, OS&Y, graphite packing,Trim No. 12

(6) GLOBE VALVES

2" and above Class 2500 RTJ Flanged A351 Gr. CF8M, PSB, OS&Y, graphite packing, Trim No. 12

(6)

1½" and under Class 2500 RTJ Flanged A182 Gr. F304/304L body, WC, Trim No. 10

(6) CHECK VALVES

2" and above Class 2500 RTJ Flanged A351 Gr. CF8M body, PSC, Trim No. 10

(6)






of 403

10.21.9 Line Class: 101SC0P

Line Class: 101SC0P Basic Material: SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code




Notes Up to 2" S-40S

4” to 6” S-10S

Seamless

A312 Gr. TP304H (1)

(2) PIPE

8" and above S-10S as minimum Welded A358 Gr. 304H Cl. 1 (3)

1½" and under Class. acc. to B16.11

Socketweld/ Threaded A182 Gr. F304H, B16.11 (5) FITTINGS


Couplings etc. 2" and above Buttweld A403 Gr. WP304H Seamless/Welded, B16.9 (5)

Nipples and Swage 2" and under Seamless A312 Gr. TP304H Sockolets/

Threadolets 1½" and under Class acc. to MSS SP97

Socketweld/ Threaded A182 Gr. F304H, MSS-SP97 (4)

Weldolets 2" and above Buttweld A182 Gr. F304H, MSS-SP97

1½" and under Class 150 Socketweld RF A182 Gr. F304H, B16.5

FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F304H, B16.5

(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Spiral-wound, 304H SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.


A182 Gr. F304H body, BB, OS&Y, graphite packing, API 602, Trim No. 12

(6)

GATE VALVES

2" and above Class 150 RF Flanged A351 Gr. CF8 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(6)


A182 Gr. F304H body, BB, OS&Y, graphite packing,Trim No. 12

(6) GLOBE VALVES

2" and above Class 150 RF Flanged A351 Gr. CF8, BB, OS&Y, graphite packing, Trim No. 12

(6)

1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304H body, BC, Trim No. 10 (6)

CHECK VALVES 2" and above Class 150 RF Flanged A351 Gr. CF8 body, BC, Trim No. 10 (6)


A182-F304H body, floating ball, RTFE seats,Trim No. 10, fire safe

(6) (7)

2" to 4" Class 150 RF Flanged A351-CF8 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) (7) BALL VALVES

6" and above Class 150 RF Flanged A351-CF8 body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (7)


A182-F304H body, lubricated, inverted pressure balanced, BC,Trim SS 316

(6) PLUG VALVES

2" and above Class 150 RF Flanged A351-CF8 body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316

(6)


Flanged A351-CF8 body, high performance, fire-safe, API 609 Cat. B,Trim No. 10





of 403







4” to 6” S-10S

Seamless

A312 Gr. TP304H (1)

(2) PIPE












(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 304H SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(6)

GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)



(6) (7)



(6) PLUG VALVES


(6)







of 403







4” to 6” S-10S

Seamless

A312 Gr. TP304H (1)

(2) PIPE















(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)



(6) (7)


A182-F304H body, lubricated, inverted pressure balanced, BC, Trim SS 316

(6) PLUG VALVES


(6)







of 403







4” to 6” S-10S

Seamless

A312 Gr. TP304H (1)

(2) PIPE















(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)

2" to 4" Class 300 RF Flanged A351-CF8 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10

(6) (7) BALL VALVES

6" and above Class 300 RF Flanged A351-CF8 body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6) (7)


A182-F304H body, lubricated, inverted pressure balanced, BC, Trim SS 316

(6) PLUG VALVES


(6)







of 403







4” to 6” S-10S as minimum

Seamless

A312 Gr. TP304H (1)

(2) PIPE















(6)

GATE VALVES


(6)



(6) GLOBE VALVES


(6)





(6) (7)

2" to 4" Class 600 RF Flanged A351-CF8 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10

(6) (7) BALL VALVES


(6) (7)



(6) PLUG VALVES


(6)







of 403

10.21.14 Line Class: 101SD0P

Line Class: 101SD0P Basic Material: SS 316/316L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code



Up to 2" S-40S

4” to 6” S-10S

Seamless

A312 Gr. TP316/316L (1)

(2) PIPE

8" and above S-10S as minimum Welded A358 Gr. 316/316L Cl. 1 (3)

1½" and under


Socketweld/ Threaded A182 Gr. F316/316L, B16.11 (5)

FITTINGS





Socketweld/ Threaded A182 Gr. F316/316L, MSS-SP97 (4)




(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.


A182 Gr. F316/316L body, BB, OS&Y, graphite packing,API 602, Trim No. 12

(6) GATE VALVES

2" and above Class 150 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(6)


A182 Gr. F316/316L body, BB, OS&Y, graphite packing,Trim No. 12

(6) GLOBE VALVES

2" and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12

(6)


A182 Gr. F316/316L body, BC, Trim No. 10

(6) CHECK VALVES

2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC,Trim No. 10 (6) 1½" and under Class 300 Socketweld/

Threaded A182-F316/316L body, floating ball, RTFE seats,Trim No. 10, fire safe

(6) (7)

2" to 4" Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10

(6) (7) BALL VALVES

6" and above Class 150 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D,Trim No. 10

(6) (7)



(6)

PLUG VALVES


(6)


Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B, Trim No. 10






of 403





Up to 2" S-40S

4” to 6” S-10S

Seamless

A312 Gr. TP316/316L (1)

(2) PIPE


1½" and under














(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES


Threaded A182-F316/316L body, floating ball, RTFE seats,Trim No. 10, fire safe

(6) (7)





(6)

PLUG VALVES


(6)








of 403





Up to 2” S-40S 4” to 6” S-10S

Seamless A32 Gr. TP316/316L (1) (2) PIPE

8” and above S-10S as minimum Welded A358 Gr. 316/316L Cl. 1 (3)

1½” and under

Class acc. To

B16.11



Couplings etc. 2” and above Buttweld A403 Gr. WP316/316L


Nipples and Swage 2” and under Seamless A312 Gr. TP316/316L Sockolets/

Threadolets 1½” and under Class acc. To MSS SP97


Weldolets 2” and above Buttweld A182 Gr. F316/316L, MSS-SP97

1½” and under Class 300 Socketweld RF A182 Gr. F316/316L, B16.5

FLANGES 2” and above Class 300 Weldneck RF A182 Gr. F316/316L, B16.5




(6) GATE VALVES

2” and above Class 300 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(6)



(6) GLOBE VALVES

2” and above Class 300 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12

(6)



(6) CHECK VALVES

2” and above Class 300 RF Flanged A351 Gr. CF8M body, BC,Trim No. 10 (6) 1½” and under Class 300 Socketweld/

Threaded A182-F316/316L body, floating ball, RTFE seats, Trim No. 10, fire safe

(6)

2” to 4” Class 300 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6) BALL VALVES

6” and above Class 300 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D,Trim No. 10 (6)



(6)

PLUG VALVES

2” and above Class 300 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316

(6)








of 403





Up to 6" S-40S Seamless A312 Gr. TP316/316L (1) (2)

8” to 12” S-40S PIPE

14" and above S-20 Welded A358 Gr. 316/316L Cl. 1 (3)

1½" and under














(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES

2" and above Class 300 RF Flanged A351 Gr.CF8M body, BC, Trim No. 10 (6) 1½" and under Class 300 Socketweld/

Threaded A182-F316/316L body, floating ball, RTFE seats, Trim No. 10, fire safe (6)

2" to 4" Class 300 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6) BALL VALVES

6" and above Class 300 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6)



(6)

PLUG VALVES


(6)








of 403





Up to 6" Seamless A312 Gr. TP316/316L (1)

(2) PIPE 8" and above Welded A358 Gr. 316/316L Cl. 1 (3)

1½" and under











A182 Gr. F316/316L body, BB, OS&Y, graphite packing, API 602, Trim No.12

(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES

2" and above Class 600 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10

(6)


A182-F316/316L body, floating ball, RTFE seats, Trim No. 10, fire safe

(6)

2" to 4" Class 600 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) BALL VALVES

6" and above Class 600 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6)

PLUG VALVES 1½" and under Class 600 Socketweld/ Threaded


(6)


BUTTERFLY VALVES

4" and above Class 600 Lugged or RF Flanged

A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10






of 403

10.21.19 Line Class: 101SR0P

Line Class: 101SR0P Basic Material: SS 304 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP304 (1)

(2) PIPE

8" and above S-10S as minimum Welded A358 Gr. 304 Cl. 1 (3)

1½" and under



FITTINGS


Couplings etc. 2" and above Buttweld A403 Gr. WP304 Seamless/Welded, B16.9 (5)

Nipples and Swages 2" and under Seamless A312 Gr. TP304


SP97 Socketweld/




2" and above Class 150 Weldneck RF A182 Gr. F304, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(6)

GATE VALVES

2" and above Class 150 RF Flanged


(6)


A182 Gr. F304 body, BB, OS&Y, graphite packing,Trim No. 12

(6) GLOBE VALVES


(6)

1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304 body, BC, Trim No. 10 (6)

CHECK VALVES 2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, Trim No.

10 (6)






of 403




Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP304 (1)

(2) PIPE


1½" and under



FITTINGS





SP97 Socketweld/




2" and above Class 150 Weldneck RF A182 Gr. F304, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(6)

GATE VALVES



(6)



(6) GLOBE VALVES


(6)



10 (6)






of 403




Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP304 (1)

(2) PIPE


1½" and under



FITTINGS





SP97 Socketweld/




2" and above Class 300 Weldneck RF A182 Gr. F304, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(6)

GATE VALVES



(6)



(6) GLOBE VALVES


(6)



10 (6)






of 403

10.21.22 Line Class: 101SS1P

Line Class: 101SS1P Basic Material: SS 304L Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP304L (1)

(2) PIPE

8" and above S-10S as minimum Welded A358 Gr. 304L Cl. 1 (3)

1½" and under


Socketweld/ Threaded A182 Gr. F304L, B16.11 (5)

FITTINGS


Couplings etc. 2" and above Buttweld A403 Gr. WP304L Seamless/Welded, B16.9 (5)

Nipples and Swages 2" and under Seamless A312 Gr. TP304L


SP97 Socketweld/

Threaded A182 Gr. F304L, MSS-SP97 (4)

Weldolets 2" and above Buttweld A182 Gr. F304L, MSS-SP97

1½" and under Class 150 Socketweld RF A182 Gr. F304L, B16.5 FLANGES

2" and above Class 150 Weldneck RF A182 Gr. F304L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.


A182 Gr. F304L body, BB, OS&Y, graphite packing, API 602, Trim No. 12

(6)

GATE VALVES


A351 Gr. CF3 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(6)


A182 Gr. F304L body, BB, OS&Y, graphite packing,Trim No. 12

(6) GLOBE VALVES


(6)


A182 Gr. F304L body, BC, Trim No. 10

(6) CHECK VALVES

2" and above Class 150 RF Flanged A351 Gr. CF3 body, BC, Trim No. 10 (6) Notes: Notes (1) through (10) of 10.21.1 shall apply.





of 403




Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP304L (1)

(2) PIPE


1½" and under



FITTINGS





SP97 Socketweld/







(6)

GATE VALVES



(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES






of 403

10.21.24 Line Class: 103SS1P Line Class: 103SS1P Basic Material: SS 304L Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification

Notes

Up to 6" S-40S

Seamless

A312 Gr. TP304L (1) (2)

8” to 12” S-40S 14" to 24” S-20

PIPE

26” and above” calculate Welded A358 Gr. 304L Cl. 1 (3)

1½" and under



FITTINGS





SP97 Socketweld/







(6)

GATE VALVES



(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES






of 403




Item

Size Rating

Schedule

Type

Specification

Notes

Up to 6" S-40S

Seamless

A312 Gr. TP304L (1) (2)


26” and above” calculate Welded A358 Gr. 304L Cl. 1 (3)

1½" and under


Socketweld/ Threaded A182 Gr. F304L, B16.11 ()

FITTINGS





SP97 Socketweld/




2" and above Class 600 Weldneck RF A182 Gr. F304L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(6)

GATE VALVES



(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES






of 403

10.21.26 Line Class: 101SU0P

Line Class: 101SU0P Basic Material: SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP316L (1)

(2) PIPE


1½" and under



FITTINGS





SP97 Socketweld/




2" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(6)

GATE VALVES



(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES


(6)






of 403




Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP316L (1)

(2) PIPE


1½" and under



FITTINGS





SP97 Socketweld/







(6)

GATE VALVES



(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES


(6)






of 403

10.21.29 Line Class: 103SJ1P

Line Class: 103SJ1P Basic Material: SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification


3” to 6” S-40S

Seamless

A312 Gr. TP321 (1)

(2)

8" to 12” S-40S PIPE

14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)

1½" and under

Class. acc. to

B16.11


FITTINGS





SP97 Socketweld/



1½" and under Class 300 Socketweld RF A182 Gr. F321, B16.5

FLANGES 2" and above Class 300 Weldneck RF A182 Gr. F321, B16.5

(8) BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS Spiral-wound, 321 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.

1½" and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347

(6)

GATE VALVES

2" and above Class 300 RF Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347

(6)

1½" and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347

(6) GLOBE VALVES

2" and above Class 300 RF Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347

(6)

1½" and under Class 800

Socketweld

A182 Gr. F321 body, BC, Trim 321/347

(6) CHECK VALVES

2" and above Class 300 RF Flanged A351 Gr. CF8C body, BC, Trim 321/347

(6)






of 403




Item

Size Rating

Schedule

Type

Specification


3” to 6” S-40S

Seamless

A312 Gr. TP321 (1)

(2)



1½" and under

Class. acc. to

B16.11


FITTINGS





SP97 Socketweld/






1½" and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347

(6)

GATE VALVES


(6)

1½" and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347

(6) GLOBE VALVES


(6)


Socketweld

A182 Gr. F321 body, BC, Trim 321/347

(6) CHECK VALVES


(6)






of 403




Item

Size Rating

Schedule

Type

Specification

Notes Up to 2” S-80S

3” to 6” S-40S

Seamless

A312 Gr. TP321 (1)

(2)



1½” and under

Class. Acc. To

B16.11


FITTINGS


Couplings etc. 2” and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)

Nipples and Swages 2” and under Seamless A312 Gr. TP321


SP97 Socketweld/


Weldolets 2” and above Buttweld A182 Gr. F321, MSS-SP97

1½” and under Class 600 Socketweld RF A182 Gr. F321, B16.5

FLANGES 2” and above Class 600 Weldneck RF A182 Gr. F321, B16.5


1½” and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347

(6)

GATE VALVES

2” and above Class 600 RF Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347

(6)

1½” and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347

(6) GLOBE VALVES

2” and above Class 600 RF Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347

(6)


Socketweld

A182 Gr. F321 body, BC, Trim 321/347

(6) CHECK VALVES

2” and above Class 600 RF Flanged A351 Gr. CF8C body, BC, Trim 321/347

(6)






of 403


Line Class: 206SJ1P Basic Material: SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 600 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification

Notes Up to 2” S-80S

3” to 6” S-40S

Seamless

A312 Gr. TP321 (1)

(2)



1½” and under

Class. Acc. To

B16.11


FITTINGS


Couplings etc. 2” and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)

Nipples and Swages 2” and under Seamless A312 Gr. TP321


SP97 Socketweld/


Weldolets 2” and above Buttweld A182 Gr. F321, MSS-SP97

1½” and under Class 600 Socketweld RTJ A182 Gr. F321, B16.5

FLANGES 2” and above Class 600 Weldneck RTJ A182 Gr. F321, B16.5

(8) BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS 321 SS octagonal ring, B16.20

1½” and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347

(6)

GATE VALVES

2” and above Class 600 RTJ Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347

(6)

1½” and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347

(6) GLOBE VALVES

2” and above Class 600 RTJ Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347

(6)


Socketweld

A182 Gr. F321 body, BC, Trim 321/347

(6) CHECK VALVES

2” and above Class 600 RTJ Flanged A351 Gr. CF8C body, BC, Trim 321/347

(6)






of 403


Line Class: 209SJ1P Basic Material: SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification

Notes

Up to 6" S-40S

Seamless

A312 Gr. TP321 (1) (2)

PIPE 8" and above calculate Welded A358 Gr. 321 Cl. 1 (3)

1½" and under

Socketweld A182 Gr. F321, B16.11 FITTINGS El's Tees,

Reducers, Caps, Couplings etc. 2" and above Buttweld A403 Gr. WP321



Sockolets 1½" and under Socketweld A182 Gr. F321L, MSS-SP97 Weldolets 2" and above Buttweld A182 Gr. F321, MSS-SP97

2½" and under Class 1500 Weldneck RTJ A182 Gr. F321, B16.5 FLANGES

3" and above Class 900 Weldneck RTJ A182 Gr. F321, B16.5 (8)


2½" and under Class 1500 Socketweld A182 Gr. F321 body, WB, OS&Y, graphite packing,API 602, Trim 321/347

(6)

GATE VALVES

3" and above Class 900 RTJ Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347

(6)

2½" and under Class 1500 Socketweld A182 Gr. F321 body, WB, OS&Y, graphite packing,Trim 321/347

(6) GLOBE VALVES

3" and above Class 900 RTJ Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347

(6)

2½" and under Class 1500 Socketweld A182 Gr. F321 body, WC, Trim 321/347

(6) CHECK VALVES

3" and above Class 900 RTJ Flanged A351 Gr. CF8C body, BC, Trim 321/347

(6)






of 403


Line Class: 215SJ1P Basic Material: SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray


Item

Size Rating

Schedule

Type

Specification

Notes

Up to 6" S-80S

Seamless

A312 Gr. TP321 (1) (2)

8" to 18” S-100 PIPE


1½" and under

Class. acc. to

B16.11


FITTINGS





SP97 Socketweld/



FLANGES 1” and above Class 1500 Weldneck RTJ A182 Gr. F321, B16.5 (8)

BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS 321 SS octagonal ring, B16.20

1½" and under Class 1500 Socketweld A182 Gr. F321 body, WB, OS&Y, graphite packing, API 602, Trim 321/347

(6)

GATE VALVES

2" and above Class 1500 RTJ Flanged A351 Gr. CF8C body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim 321/347

(6)

1½" and under Class 1500 Socketweld A182 Gr. F321 body, WB, OS&Y, graphite packing, Trim 321/347

(6) GLOBE VALVES

2" and above Class 1500 RTJ Flanged A351 Gr. CF8C, PSB, OS&Y, graphite packing, Trim 321/347

(6)


Socketweld

A182 Gr. F321 body, WC, Trim 321/347

(6) CHECK VALVES

2" and above Class 1500 RTJ Flanged A351 Gr. CF8C body, PSC, Trim 321/347

(6)






of 403

10.21.35 Line Class: 103SP1P

Line Class: 103SP1P Basic Material: Duplex S32205 Max. Temperature: 316°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code

Temperature (°C) (2) -40 100 150 200 300 316 Pressure Rating (bar) (2) 51.7 50.7 45.9 42.7 38.9 38..5

Item

Size Rating

Schedule

Type

Specification

Notes

PIPE ¾” and above To calculate Seamless

or Welded

A790 Gr. UNS S32205 (1) (2)

1½" and under


Socketweld A182 Gr. F51, B16.11 (5) FITTINGS

El's Tees,

Reducers, Caps, Couplings etc. 2" and above Buttweld A815 Gr. UNS S32205


Nipples and Swages 2" and under Seamless A790 Gr. UNS S32205


SP97 Socketweld/

Threaded A182 Gr. F51, MSS SP97 (4)



All Class 300 Weldneck RF A182 Gr. F51, B16.5

(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, S32205 windings, flexible graphite filled with carbon steel outer ring, per B16.20.

1 1/2 " and under Class 800 Socketweld A182 Gr. F51 body, BB, OS&Y, graphite packing, API 602, Trim 2205/HF

(6)

GATE VALVES

2" and above Class 300 RF Flanged A928 Gr. UNS S32205 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 2205/HF

(6)

1 1/2 " and under Class 800 Socketweld A182 Gr. F51 body, BB, OS&Y, graphite packing, Trim 2205/HF

(6) GLOBE VALVES

2" and above Class 300 RF Flanged A928 Gr. UNS S32205, OS&Y, graphite packing, Trim 2205/HF

(6)

1 1/2 " and under Class 800 Socketweld A182 Gr. F51 body, BC, Trim 2205/HF

(6) CHECK VALVES

2" and above Class 300 RF Flanged A928 Gr. UNS S32205 body, BC, Trim 2205/HF

(6)






of 403

10.21.36 Line Class: 215SP1P

Line Class: 215SP1P Basic Material: Duplex S32205 Max. Temperature: 316°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray


Item

Size Rating

Schedule

Type

Specification

Notes

PIPE ¾” and above Seamless

or Welded

A790 Gr. UNS S32205 (1) (2)

1½" and under


El's Tees,




Sockolets/ Threadolets 1½" and under Socketweld/

Threaded A182 Gr. F51, MSS SP97 (4)

Weldolets 2" and above Buttweld A182 Gr. F51, MSS-SP97 FLANGES All Class 1500 Weldneck RTJ A182 Gr. F51, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Octagonal Ring 2205 SS B16.20.


(6)

GATE VALVES

2" and above Class 1500 RTJ Flanged A928 Gr. UNS S32205 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 2205/HF

(6)


(6) GLOBE VALVES

2" and above Class 1500 RTJ Flanged A928 Gr. UNS S32205, OS&Y, graphite packing, Trim 2205/HF

(6)


(6) CHECK VALVES

2" and above Class 1500 RTJ Flanged A928 Gr. UNS S32205 body, BC, Trim 2205/HF

(6)






of 403

10.21.37 Line Class: 101ST1P

Line Class: 101ST1P Basic Material: SS 316 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code




Notes

Up to 6"

Seamless

A312 Gr. TP316 (1)

(2) PIPE

8" and above Welded A358 Gr. 316 Cl. 1 (3)

1½" and under 3000 Socketweld/ Threaded A182 Gr. F316, B16.11 (5) FITTINGS



Nipples and Swage 2" and under Seamless A312 Gr. TP316 Sockolets/

Threadolets 1½" and under Socketweld/ Threaded A182 Gr. F316, MSS-SP97 (4)






A182 Gr. F316 body, BB, OS&Y, graphite packing, API 602,Trim No. 12

(6) GATE VALVES


(6)



(6) GLOBE VALVES


(6)


CHECK VALVES 2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10 (6)


A182-F316 body, floating ball, RTFE seats,Trim No. 10, fire safe

(6) (7)

2" to 4" Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10

(6) (7) BALL VALVES

6" and above Class 150 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10

(6) (7)


A182-F316 body, lubricated, inverted pressure balanced, BC,Trim SS 316

(6) PLUG VALVES

2" and above Class 150 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced,API 599, Trim SS 316

(6) BUTTERFLY

VALVES 4" and above Class 150 Lugged or RF Flanged






of 403

10.21.38 Line Class: 103ST1P

Line Class: 103ST1P Basic Material: SS 316 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code



Up to 6" S-40S

Seamless

A312 Gr. TP316 (1) (2)

8” to 12” S-40S 14" to 24” S-20

PIPE

26” and above” calculate Welded A358 Gr. 316 Cl. 1 (3)

1½" and under


FITTINGS


Couplings etc. 2" and above Buttweld A403 Gr. WP316/Seamless/Welded, B16.9






2" and above Class 300 Weldneck RF A182 Gr. F316, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(6)

GATE VALVES


(6)



(6) GLOBE VALVES


(6)


A182 Gr. F316 body, BC, Trim No. 10

(6) CHECK VALVES


(6)






of 403

10.21.39 Line Class: 106SU0P Line Class: 106SU0P Basic Material: SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification


4” to 6” S-40S

Seamless

A312 Gr. TP316L (1)

(2)


14” and above calculated Welded A358 Gr. 316L Cl. 1 (3)

1½" and under



FITTINGS





SP97 Socketweld/







(6)

GATE VALVES



(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES


(6)






of 403

10.22 Stainless Steel for Sour Service Line Classes


The following Notes shall apply to all of this stainless steel class family and shall be considered as an integral part of the individual line class.

Notes:









(6) Valve Trim


(7) Flanges





(11) Void.





of 403

10.22.2 Line Class: 101SC0S

Line Class: 101SC0S Basic Material: Sour SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay





4” to 6” S-10S

Seamless

A312 Gr. TP304H (1)

(2) PIPE












(7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts GASKETS Spiral-wound, 304H SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.


A182 Gr. F304H body, BB, OS&Y, graphite packing, API 602,Trim No. 12 (5)



(5)



(5) GLOBE VALVES


(5)




A182-F304H body, floating ball, RTFE seats,Trim No. 10, fire safe (6) (5)





(5) PLUG VALVES


(5)







of 403

10.22.3 Line Class: 103SC0S

Line Class: 103SC0S Basic Material: Sour SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay





4” to 6” S-10S

Seamless

A312 Gr. TP304H (1)

(2) PIPE












(7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts GASKETS Spiral-wound, 304H SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.


A182 Gr. F304H body, BB, OS&Y, graphite packing, API 602,Trim No. 12

(5) GATE VALVES


(5)



(5) GLOBE VALVES


(5)




A182-F304H body, floating ball, RTFE seats,Trim No. 10, fire safe (5) (6)





(5) PLUG VALVES


(5)







of 403

10.22.4 Line Class: 101SD1S

Line Class: 101SD1S Basic Material: SS 316/316L Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay



Up to 2" S-40S

4” to 6” S-10S

Seamless

A312 Gr. TP316/316L (1)

(2) PIPE


1½" and under











(7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(5) GATE VALVES


(5)



(5) GLOBE VALVES


(5)



(5) CHECK VALVES


Threaded A182-F316/316L body, floating ball, RTFE seats,Trim No. 10, fire safe (5) (6)





(5)

PLUG VALVES


(5)








of 403

10.22.5 Line Class: 101ST0S

Line Class: 101ST0S Basic Material: Sour SS 316 Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP316L (1)

(2) PIPE


1½" and under



FITTINGS





SP97 Socketweld/




2" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(5)

GATE VALVES



(5)



(5) GLOBE VALVES


(5)



(5) CHECK VALVES


(5)






of 403




Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP316L (1)

(2) PIPE


1½" and under



FITTINGS





SP97 Socketweld/







(5)

GATE VALVES



(5)



(5) GLOBE VALVES


(5)



(5) CHECK VALVES


(5)






of 403

10.22.8 Line Class: 101SU0S

Line Class: 101SU0S Basic Material: Sour SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP316L (1)

(2) PIPE


1½" and under



FITTINGS





SP97 Socketweld/







(5)

GATE VALVES



(5)



(5) GLOBE VALVES


(5)



(5) CHECK VALVES


(5)






of 403




Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP316L (1)

(2) PIPE


1½" and under



FITTINGS





SP97 Socketweld/







(5)

GATE VALVES



(5)



(5) GLOBE VALVES


(5)



(5) CHECK VALVES


(5)






of 403




Item

Size Rating

Schedule

Type

Specification

Notes Up to 2" S-80S 3” to 6” S-40S

8" to 12” S-40S

Seamless

A312 Gr. TP316L (1)

(2) PIPE


1½" and under



FITTINGS





SP97 Socketweld/







(5)

GATE VALVES



(5)



(5) GLOBE VALVES


(5)



(5) CHECK VALVES


(5)






of 403




Item

Size Rating

Schedule

Type

Specification


8" to 12” S-40S

Seamless

A312 Gr. TP316L (1)

(2) PIPE


1½" and under



FITTINGS





SP97 Socketweld/







(5)

GATE VALVES



(5)



(5) GLOBE VALVES


(5)



(5) CHECK VALVES


(5)






of 403

10.22.14 Line Class: 106SA1S

Line Class: 106SA1S Basic Material: Sour 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rat. Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size

Rating Schedule

Type

Specification

Notes

Up to 6" S-40S

Seamless

A312 Gr. TP304/304L (1) (2)


26” and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)

1½" and under









(7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(5) GATE VALVES

2" and above Class 600 RF Flanged A351 Gr. CF8M body, BB, OS&Y, graphite packing, API 600, Trim No. 12

(5)



(5) GLOBE VALVES


(5)



(5) CHECK VALVES

2" and above Class 600 RF Flanged A351 Gr. CF8M body, BC, Trim No.10 (5) 1½" and under Class 600 Socketweld/

Threaded A182-F304/304L body, floating ball, RTFE seats, Trim No. 10, fire safe (5) (6)





(5) PLUG VALVES

2" and above Class 600 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced,API 599, Trim SS 316

(5) BUTTERFLY








of 403


Line Class: 209SA1S Basic Material: Sour 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification

Notes

Up to 6" S-40S

Seamless

A312 Gr. TP304/304L (1) (2)


1½" and under

Socketweld A182 Gr. F304/304L, B16.11 FITTINGS El's Tees,

Reducers, Caps, Couplings etc. 2" and above Buttweld A403 Gr. WP304/304L



Sockolets/ Threadolets 1½" and under Socketweld A182 Gr. F304/304L, MSS-SP97


2½" and under Class 1500 Socketweld RTJ A182 Gr. F304/304L, B16.5

FLANGES 3" and above Class 900 Weldneck RTJ A182 Gr. F304/304L, B16.5

(7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS 316SS octagonal ring

1½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WB, OS&Y, graphite packing,API 602, Trim No. 12

(5)

2” to 2½" Class 1500 RTJ Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12

(5) GATE VALVES


(5)

1½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WB, OS&Y, graphite packing,Trim No. 12

(5)

2” to 2½" Class 1500 RTJ Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12

(5) GLOBE VALVES


(5)

1½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WC, Trim No. 10

(5)

2” to 2½" Class 1500 RTJ Flanged A351 Gr. CF8M body, BC, Trim No.10 (5) CHECK VALVES






of 403


Line Class: 225SA1S Basic Material: Sour 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray


Item

Size Rating

Schedule

Type

Specification

Notes

Up to 6" calculate

Seamless

A312 Gr. TP304/304L (1) (2) PIPE

8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3) FITTINGS El's Tees,





BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS 316 SS octagonal ring


(5)

GATE VALVES


(5)


(5) GLOBE VALVES


(5)


(5) CHECK VALVES

2" and above Class 2500 RTJ Flanged A351 Gr. CF8M body, PSC, Trim No. 10

(5)






of 403

10.22.17 Line Class: 225SJ1S

Line Class: 225SJ1S Basic Material: Sour 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification

Notes Up to 4" S-80S 6” to 8” S-100

Seamless A312 Gr. TP321 (1) (2)

8" to 12” PIPE


FITTINGS


etc.




BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS 321 SS octagonal ring, B16.20

1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, API 602, Trim 321/347

(5)

GATE VALVES


(5)

1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, Trim 321/347

(5) GLOBE VALVES


(5)

1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WC, Trim 321/347

(5) CHECK VALVES


(5)






of 403

10.22.18 Line Class: 225SJ2S

Line Class: 225SJ2S Basic Material: Sour 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification



8" to 12” PIPE


FITTINGS


etc.




BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS 321 SS octagonal ring, B16.20


(5)

GATE VALVES


(5)


(5) GLOBE VALVES


(5)


(5) CHECK VALVES


(5)






of 403

10.23 Stainless Steel For Caustic Services Line Classes



Notes:





(4) Seal Welding






(7) Valve Trim


(8) Flanges







of 403

10.23.2 Line Class: 101SD0C

Line Class: 101SD0C Basic Material: SS 316/316L Max. Temperature: 80°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size Rating


Up to 2" S-40S

3” to 6” S-10S

Seamless

A312 Gr. TP316/316L (1)

(2) PIPE

8" and above S-10S as minimum Welded A358 Gr. 316/316L Cl. 1

1½" and under Class acc. to B16.11 Socketweld/ Threaded A182 Gr. F316/316L, B16.11 (5) FITTINGS

El's Tees,


2" and above Buttweld A403 Gr. WP316/316L, B16.9 (5)



SP97 Socketweld/

Threaded (4)


A182 Gr. F316/316L MSS-SP97




1½" and under Class 800 Socketweld A182 Gr. F316/316L body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES

2" and above Class 150 RF Flanged A351 Gr. CF8M body, BB, OS&Y, PTFE packing, Trim NO. 9

(6)

1½" and under Class 800 Socketweld A182 Gr. F316/316L body, BC, PTFE gasket, trim NO. 9 CHECK VALVES

2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, PTFE gasket, Trim NO. 9

(6)


A182 Gr. F316/316L body, BB, OS&Y, PTFE packing,API 602, Trim NO. 9

(6) GATE VALVES

2" and above Class 150 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, PTFE packing, API 600, Trim NO. 9

(6)


A182 Gr. F316/316L body, API 599, RTFE Sleeve and Packing PLUG VALVES

2" and above Class 150 RF Flanged A351 Gr. CF8M body, API 599, RTFE Sleeve and Packing

(6)






of 403

10.23.3 Line Class: 101SS1C

Line Class: 101SS1C Basic Material: SS 304L Max. Temperature: 80°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code



Up to 2" S-40S

4” to 6” S-10S

Seamless

A312 Gr. TP304L (1)

(2) PIPE

8" and above S-10S as minimum Welded A358 Gr. 304L Cl. 1

1½" and under Class acc. to B16.11 Socketweld/ Threaded A182 Gr. F304L, B16.11 (5) FITTINGS

El's Tees,


2" and above Buttweld A403 Gr. WP304L, B16.9 (5)



SP97 Socketweld/

Threaded (4)


A182 Gr. F304L MSS-SP97

1½" and under Class 150 Socketweld RF A182 Gr. F304L, B16.5

FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F304L, B16.5


1½" and under Class 800 Socketweld A182 Gr. F304L body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES

2" and above Class 150 RF Flanged A351 Gr. CF3 body, BB, OS&Y, PTFE packing, Trim NO. 9

(6)

1½" and under Class 800 Socketweld A182 Gr. F304L body, BC, PTFE gasket, trim NO. 9 CHECK VALVES

2" and above Class 150 RF Flanged A351 Gr. CF3 body, BC, PTFE gasket, Trim NO. 9

(6)


A182 Gr. F304L body, BB, OS&Y, PTFE packing,API 602, Trim NO. 9

(6) GATE VALVES

2" and above Class 150 RF Flanged A351 Gr. CF3 body, Wedge type: BB, OS&Y, PTFE packing, API 600, Trim NO. 9

(6)


A182 Gr. F304L body, API 599, RTFE Sleeve and Packing PLUG VALVES

2" and above Class 150 RF Flanged A351 Gr. CF3 body, API 599, RTFE Sleeve and Packing

(6)






of 403

10.23.4 Line Class: 101ST1C

Line Class: 101ST1C Basic Material: SS 316 Max. Temperature: 80°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code



Up to 2" S-40S

4” to 6” S-10S

Seamless

A312 Gr. TP316 (1)

(2) PIPE

8" and above S-10S as minimum Welded A358 Gr. 316 Cl. 1


El's Tees,


2" and above Buttweld A403 Gr. WP316, B16.9 (5)



SP97 Socketweld/

Threaded (4)


A182 Gr. F316 MSS-SP97




1½" and under Class 800 Socketweld A182 Gr. F316 body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES


(6)

1½" and under Class 800 Socketweld A182 Gr. F316 body, BC, PTFE gasket, trim NO. 9 CHECK VALVES


(6)


A182 Gr. F316 body, BB, OS&Y, PTFE packing,API 602, Trim NO. 9

(6) GATE VALVES


(6)


A182 Gr. F316 body, API 599, RTFE Sleeve and Packing PLUG VALVES


(6)






of 403

10.23.5 Line Class: 103SD0C

Line Class: 103SD0C Basic Material: SS 316/316L Max. Temperature: 80°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code



Up to 2" S-40S

4” to 6” S-10S

Seamless

A312 Gr. TP316/316L (1)

(2) PIPE

8" and above S-10S as minimum Welded A358 Gr. 316/316L Cl. 1

1½" and under Class acc. to B16.11 Socketweld/ Threaded A182 Gr. F316/316L, B16.11 (5) FITTINGS

El's Tees,


2" and above Buttweld A403 Gr. WP316/316L, B16.9 (5)



SP97 Socketweld/

Threaded (4)


A182 Gr. F316/316L MSS-SP97




1½" and under Class 800 Socketweld A182 Gr. F316/316L body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES


(6)

1½" and under Class 800 Socketweld A182 Gr. F316/316L body, BC, PTFE gasket, trim NO. 9 CHECK VALVES


(6)


A182 Gr. F316/316L body, BB, OS&Y, PTFE packing,API 602, Trim NO. 9

(6) GATE VALVES


(6)


A182 Gr. F316/316L body, API 599, RTFE Sleeve and Packing PLUG VALVES


(6)






of 403

10.23.6 Line Class: 101SR0C

Line Class: 101SR0C Basic Material: SS 304 Max. Temperature: 80°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size Rating


Up to 2" S-40S

4” to 6” S-10S

Seamless

A312 Gr. TP304 (1)

(2) PIPE



El's Tees,


2" and above Buttweld A403 Gr. WP304, B16.9 (5)



SP97 Socketweld/

Threaded (4)


A182 Gr. F304 MSS-SP97




1½" and under Class 800 Socketweld A182 Gr. F304 body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES


(6)

1½" and under Class 800 Socketweld A182 Gr. F304 body, BC, PTFE gasket, trim NO. 9 CHECK VALVES


(6)


A182 Gr. F304 body, BB, OS&Y, PTFE packing,API 602, Trim NO. 9

(6) GATE VALVES


(6)


A182 Gr. F304 body, API 599, RTFE Sleeve and Packing PLUG VALVES


(6)






of 403

10.24 Stainless Steel for Sulfuric Acid Services Line Classes



Notes:





(4) Seal Welding






(7) Valve Trim


(8) Flanges







of 403

10.24.2 Line Class: 101SD0A

Line Class: 101SD0A Basic Material: SS 316/316L Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay



1" to 6” S-40S Seamless A312 TP316/316L (1) (2)

8” to 12 S-10S PIPE

14” to 24” S-10S Welded A358 Gr. 316/316L Cl. 1 (3)

FITTINGS


Couplings etc.

All Buttweld A403-Gr. WP316/316L, B16.9 (5)


FLANGES All Class 150 Weldneck RF A182 Gr. F316/316L, B16.5 (8)

BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21 (6)

GATE VALVE 2" and under Class 150 RF Flanged A351 CN7M body, BB, OS&Y, Trim No. 13, PTFE Gask&Pack

(6)


(6)


(6)


(6)






of 403

10.24.3 Line Class: 103SD0A

Line Class: 103SD0A Basic Material: SS 316/316L Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code



1" to 6” S-40S Seamless A312 TP316/316L (1) (2)


14” to 24” S-10S Welded A358 Gr. 316/316L Cl. 1 (3)

FITTINGS


Couplings etc.

All Buttweld A403-Gr. WP316/316L, B16.9 (5)


FLANGES All Class 300 Weldneck RF A182 Gr. F316/316L, B16.5 (8)



(6)


(6)


(6)


(6)






of 403

10.24.4 Line Class: 101ST0A

Line Class: 101ST0A Basic Material: SS 316 Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay



1" to 6” S-40S Seamless A312 TP316 (1) (2)


14” to 24” S-10S Welded A358 Gr. 316 Cl. 1 (3)

FITTINGS


Couplings etc.

All Buttweld A403-Gr. WP316, B16.9 (5)


FLANGES All Class 150 Weldneck RF A182 Gr. F316, B16.5 (8)



(6)


(6)


(6)


(6)






of 403


Line Class: 101ST1A Basic Material: SS 316 Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay






FITTINGS


Couplings etc.






(6)


(6)


(6)


(6)






of 403


Line Class: 101ST2A Basic Material: SS 316 Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay





16” to 24” calculate Welded A358 Gr. 316 Cl. 1 (3)

FITTINGS


Couplings etc.






(6)


(6)


(6)


(6)






of 403


Line Class: 103ST1A Basic Material: SS 316 Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code






FITTINGS


Couplings etc.






(6)


(6)


(6)


(6)






of 403

10.24.8 Line Class: 101SW1A

Line Class: 101SW1A Basic Material: Zecor™+SS310 Max. Temperature: 127°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size Rating


Up to ¾” S-40S Seamless A312 TP310S (1) (2)

1" to 6” S-40S 8” to 12 S-40S

PIPE

14” to 24” S-10S Welded Zecor™ (3)

Up to ¾” Socketweld A182 Gr. F310, B16.11 FITTINGS


etc. 1" and above Weldneck Zecor™, B16.9 (5)

Extruded Outlets ½” and above Buttweld Zecor™, MSS-SP97 Stub in 1½” and above Buttweld 316L SS reinforcement pad

Up to ¾” Class 150 Socketweld A182 Gr. F310, B16.5 FLANGES

1” and above Class 150 Lap Joint A105 Epoxy painted or A182 Gr. F304 Stub end shall be of Zecor™

(8)

BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat ring type face, 3.0 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or Goretex GR

GATE VALVE All Class 150 RF Flanged A351 CK20 body, BB, OS&Y, 310S Trim, integral backseat, CF8M gland flange, B8 bolt, PTFE Gask&Pack

(6)

GLOBE VALVES All Class 150 RF Flanged

A351 CK20 body, BB, OS&Y, taper type disc, 310S Trim, integral seat, CF8M gland flange, B8 bolt,PTFE Gask&Pack

(6)

CHECK VALVES All Class 150 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask, integral seats

(6)


(6)

BUTTERFLY VALVES 3” and above Class 150 Wafer

A351- CD4MCu body and disc, Ferralium 255 shaft, Ferralium 225 pins, CD4MCu Metal to metal seats with Glass reinforc. PTFE Insert, class VI shut off at 232°C

NEEDLE VALVE ½” Class 3000 Threaded

A351-CN7M body, Screwed bonnet rising stem, inside screw, needle point disc integral with stem, integral seats TFE packing

SAMPLING VALVES ¼” to ¾” Class 300

Threaded male inlet Plain end

outlet

A351-CN7M body, outside stem thread, union bonnet, rising stem, needle point disc integral with stem, renewable TFE seats, TFE packing






of 403

10.25 Stainless Steel Alloys for Hydrogen Services


The following Notes shall apply to all of this steel classes family and shall be considered as an integral part of the individual line class.

Notes:


For hydrogen service, refer to API-941 for temperature limits of material at applicable hydrogen partial pressure.




(4) Seal Welding







(7) Valve Trim


(8) Flanges









of 403

10.25.2 Line Class: 101SU0H

Line Class: 101SU0H Basic Material: H2 SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification


Seamless A312 Gr. TP316L (1) (2) PIPE

8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3) FITTINGS

El's Tees,


1" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (5)

Weldolets 1" and above Buttweld A182 Gr. F316L, MSS-SP97 FLANGES 1" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)

1½" and under Class 150 RF Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12

(6)

GATE VALVES



(6)

1½" and under Class 150 RF Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12

(6) GLOBE VALVES


(6)

1½" and under Class 150 RF Flanged A182 Gr. F316L body, BC, Trim No. 10

(6) CHECK VALVES


(6)






of 403

10.25.3 Line Class: 103SD1H

Line Class: 103SD1H Basic Material: H2 SS 316/316L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay



Up to 6" S-40S Seamless A312 Gr. TP316/316L (1) (2)


14" and above S-20 Welded A358 Gr. 316/316L Cl. 1 (3)

FITTINGS El's Tees,




FLANGES 1" and above Class 300 Weldneck RF A182 Gr. F316/316L, B16.5 (8)

BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)

1½" and under Class 300 RF Flanged A182 Gr. F316/316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12

(6)

GATE VALVES


(6)

1½" and under Class 300 RF Flanged A182 Gr. F316/316L body, BB, OS&Y, graphite packing,Trim No. 12

(6) GLOBE VALVES


(6)

1½" and under Class 300 RF Flanged A182 Gr. F316/316L body, BC, Trim No. 10

(6) CHECK VALVES

2" and above Class 300 RF Flanged A351 Gr.CF8M body, BC, Trim No. 10 (6) 1½" and under Class 300 RF Flanged A182-F316/316L body, floating ball,

RTFE seats, Trim No. 10, fire safe (6)(7)

2" to 4" Class 300 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6)(7) BALL VALVES

6" and above Class 300 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6)(7)

1½" and under Class 300 RF Flanged A182-F316L/316 body, lubricated, inverted pressure balanced, BC, Trim SS 316

(6)

PLUG VALVES


(6)






of 403

10.25.4 Line Class: 103SJ0H

Line Class: 103SJ0H Basic Material: H2 SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification





FITTINGS


etc.



FLANGES 1" and above Class 300 Weldneck RF A182 Gr. F321, B16.5 (8)

BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts. GASKETS SS321 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)

1½" and under Class 300 RF Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347

(6)

GATE VALVES


(6)

1½" and under Class 300 RF Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347

(6) GLOBE VALVES


(6)

1½" and under Class 300 RF Flanged A182 Gr. F321 body, BC, Trim 321/347

(6) CHECK VALVES


(6)






of 403




Item

Size Rating

Schedule

Type

Specification





FITTINGS


etc.




BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS SS321 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)


(6)

GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES


(6)






of 403

10.25.6 Line Class: 203SJ1H (to be only applied to hydrocrakers)

Line Class: 203SJ1H Basic Material: H2 SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 300 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification





FITTINGS


etc.



FLANGES 1" and above Class 300 Weldneck RTJ A182 Gr. F321, B16.5 (8)


1½" and under Class 300 RTJ Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347

(6)

GATE VALVES


(6)

1½" and under Class 300 RTJ Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347

(6) GLOBE VALVES


(6)

1½" and under Class 300 RTJ Flanged A182 Gr. F321 body, BC, Trim 321/347

(6) CHECK VALVES


(6)






of 403




Item

Size Rating

Schedule

Type

Specification





FITTINGS


etc.




BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS SS321 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)


(6)

GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES


(6)






of 403


Line Class: 209SJ1H Basic Material: H2 SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification



8" to 12” S-100 PIPE


FITTINGS


etc.


Weldolets 1" and above Buttweld A182 Gr. F321, MSS-SP97 2½ and under Class 1500 Weldneck RTJ

FLANGES 3" and above Class 900 Weldneck RTJ A182 Gr. F321, B16.5 (8)



(6)

GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES


(6)






of 403




Item

Size Rating

Schedule

Type

Specification



8" to 12” S-100 PIPE


FITTINGS


etc.






(6)

GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES


(6)






of 403




Item

Size Rating

Schedule

Type

Specification



8" to 12” PIPE


FITTINGS


etc.






(6)

GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES


(6)






of 403




Item

Size Rating

Schedule

Type

Specification


6” to 8”

Seamless

A312 Gr. TP321

(1) (2)

8" to 12” PIPE

14” and above

calculated Welded A358 Gr. 321 Cl. 1 (3)

FITTINGS


etc.






(6)

GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES


(6)






of 403

10.25.12 Line Class: 103SR0H

Line Class: 103SR0H Basic Material: H2 SS 304 Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification


Seamless A312 Gr. TP304 (1) (2) PIPE

8" and above S-10S as minimum Welded A358 Gr. 304 Cl. 1 (3) FITTINGS

El's Tees,



Weldolets 1" and above Buttweld A182 Gr. F304, MSS-SP97 FLANGES 1" and above Class 300 Weldneck RF A182 Gr. F304, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)


(6)

GATE VALVES


(6)

1½" and under Class 300 RF Flanged A182 Gr. F304 body, BB, OS&Y, graphite packing,Trim No. 12

(6) GLOBE VALVES


(6) 1½" and under Class 300 RF Flanged A182 Gr. F304 body, BC, Trim No. 10 (6)

CHECK VALVES 2" and above Class 300 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10

(6)






of 403

10.25.13 Line Class: 106SM0H

Line Class: 106SM0H Basic Material: H2 SS 347H Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification


3” to 6” S-40S

Seamless

A312 Gr. TP347H (1)

(2)


14” and above calculated Welded A358 Gr. 347H Cl. 1 (3)

FITTINGS


etc.

1" and above Buttweld A403 Gr. WP347H Seamless/Welded, B16.9 (5)


FLANGES 1" and above Class 600 Weldneck RF A182 Gr. F347H, B16.5 (8)

BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS SS321/347 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)

1½" and under Class 600 RF Flanged A182 Gr. F347H body, BB, OS&Y, graphite packing, API 602, Trim 347H

(6)

GATE VALVES

2" and above Class 600 RF Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 347H

(6)

1½" and under Class 600 RF Flanged A182 Gr. F347H body, BB, OS&Y, graphite packing, Trim 347H

(6) GLOBE VALVES


(6)

1½" and under Class 600 RF Flanged A182 Gr. F347H body, BC, Trim 347H

(6) CHECK VALVES

2" and above Class 600 RF Flanged A351 Gr. CF8C body, BC, Trim 347H (6) Notes: Notes (1) through (10) of 10.25.1 shall apply.





of 403


Line Class: 106SU0H Basic Material: H2 SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification


3” to 6” S-40S

Seamless

A312 Gr. TP316L (1)

(2)



FITTINGS


etc.


Weldolets 1" and above Buttweld A182 Gr. F316L, MSS-SP97 FLANGES 1" and above Class 600 Weldneck RF A182 Gr. F316L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)

1½" and under Class 600 RF Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12

(6)

GATE VALVES



(6)

1½" and under Class 600 RF Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12

(6) GLOBE VALVES


(6)

1½" and under Class 600 RF Flanged A182 Gr. F316L body, BC, Trim No. 10

(6) CHECK VALVES


(6)






of 403

10.25.15 Line Class: 209SA1H

Line Class: 209SA1H Basic Material: SS 304/304L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification

Notes

Up to 6" S-80S

Seamless

A312 Gr. TP304/304L (1) (2)


FITTINGS El's Tees,



Weldolets 2" and above Buttweld A182 Gr. F304/304L, MSS-SP97 2½" and under Class 1500 Weldneck RTJ A182 Gr. F304/304L, B16.5

FLANGES 3" and above Class 900 Weldneck RTJ A182 Gr. F304/304L, B16.5

(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS 316 SS octagonal ring


(6)

GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES






of 403

10.25.16 Line Class: 215SA1H

Line Class: 215SA1H Basic Material: H2 SS 304/304L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification

Notes

Up to 4" S-80S

Seamless

A312 Gr. TP304/304L (1) (2)


FITTINGS El's Tees,





BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS 316 SS octagonal ring


(6)

GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES

2" and above Class 1500 RTJ Flanged A351 Gr. CF8M body, PSC, Trim No.10

(6)






of 403

10.25.17 Line Class: 206SM0H Line Class: 206SM0H Basic Material: H2 SS 347H Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 600 RJ B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification


3” to 6” S-40S

Seamless

A312 Gr. TP347H (1)

(2)


14” and above calculated Welded A358 Gr. 347H Cl. 1 (3)

FITTINGS


etc.

1" and above Buttweld A403 Gr. WP347H Seamless/Welded, B16.9 (5)


FLANGES 1" and above Class 600 Weldneck RTJ A182 Gr. F347H, B16.5 (8)

BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS SS321/347 Octagonal Ring B16.10

1½" and under Class 600 RTJ Flanged A182 Gr. F347H body, BB, OS&Y, graphite packing, API 602, Trim 347H

(6)

GATE VALVES

2" and above Class 600 RTJ Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 347H

(6)

1½" and under Class 600 RTJ Flanged A182 Gr. F347H body, BB, OS&Y, graphite packing, Trim 347H

(6) GLOBE VALVES


(6)

1½" and under Class 600 RTJ Flanged A182 Gr. F347H body, BC, Trim 347H

(6) CHECK VALVES

2" and above Class 600 RTJ Flanged A351 Gr. CF8C body, BC, Trim 347H (6) Notes: Notes (1) through (10) of 10.25.1 shall apply.





of 403


Line Class: 206SU0H Basic Material: H2 SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RJ B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification


3” to 6” S-40S

Seamless

A312 Gr. TP316L (1)

(2)



FITTINGS


etc.


Weldolets 1" and above Buttweld A182 Gr. F316L, MSS-SP97 FLANGES 1" and above Class 600 Weldneck RTJ A182 Gr. F316L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS SS316 Octagonal ring B16.10

1½" and under Class 600 RTJ Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12

(6)

GATE VALVES

2" and above Class 600 RTJ Flanged


(6)

1½" and under Class 600 RTJ Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12

(6) GLOBE VALVES


(6)

1½" and under Class 600 RTJ Flanged A182 Gr. F316L body, BC, Trim No. 10

(6) CHECK VALVES

2" and above Class 600 RTJ Flanged A351 Gr. CF3M body, BC, Trim No. 10

(6)






of 403

10.26 Stainless Steel for Toxic and Benzene(<95% wt) Service Line Classes.


The following Notes shall apply to all of the stainless steel classes family and shall be considered as an integral part of the individual line class.

Notes:





(4) Valve leakage









(7) Valve Trim


(8) Flanges









of 403

10.26.2 Line Class: 103SD1X Line Class: 103SD1X Basic Material: SS 316/316L Max. Temperature: 538°C Stress Relief: Per Code Service: Toxic, Benzene (<95%) Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25




Up to 6" S-40S 8” to 12” S-40S

Seamless A312 Gr. TP316/316L (1) (2) PIPE

14" and above S-20 Welded A358 Gr. 316/316L Cl.1 1½" and under Class acc. to B16.11 Socketweld A182 Gr. F316/316L, B16.11

(3) FITTINGS El's Tees,


2" and above Buttweld A403 Gr. WP316/316L Cl. 1 Seamless/Welded, B16.9 (5)

Nipples, Swages 2" and under Seamless A312 Gr. TP316/316L

Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A182 Gr. F316/316L, MSS SP 97

Weldolets 2" and above Buttweld A182 Gr. F316/316L MSS SP 97 1½" and under Class 300 Sockwd RFS FLANGES 2" and above Class 300 Weldnck RFS

A182 Gr. F316/316L, B16.5 (8)

BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts.

GASKETS Metal grooved gasket with flexible graphite layer is preferred. Or, spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. Inner ring 316 (10)

1½" and under Class 800 Socketweld A182 Gr. F316/316L Cl. 2 body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.12

(6)

GATE VALVES


A351 Gr. CF8M body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 12

(6)

1½" and under Class 800 Socketweld A182 Gr. F316/316L Cl. 2 body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.12

(6)

GLOBE VALVES


A351 Gr. CF8M body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 12

(6)

1½" and under Class 800 Socketweld A182 Gr. F316/316L Cl. 2 body, BC, Trim No. 1

(6) CHECK VALVES

2" and above Class 300 RF Flanged SM A351 Gr. CF8M body, BC, Trim No. 1 (6)


A182 Gr. F316/316L Cl. 2 body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe

(6)(7)


A351 Gr. CF8M body, floating ball, RTFE seats, fire safe, API 6D, Graphite Packing, Trim No. 10

(6)(7) BALL VALVES


A351 Gr. CF8M body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP

(6)(7)






of 403

10.27 Specialty Alloys For Process Service Line Classes


The following Notes shall apply to all of this specialty alloys class family and shall be considered as an integral part of the individual line class.

Notes:





(4) Seal Welding






(7) Valve Trim


(8) Flanges



(10) Void.





of 403

10.27.2 Line Class: 101NC0P

Line Class: 101NC0P Basic Material: Alloy C276 Max. Temperature: 500°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Hydro. Tested



PIPE Up to 8" calculate Seamless B619 N10276

1½" and under


Socketweld/ Threaded

B462 N10276, B16.11 Annealed (5)

FITTINGS


Couplings etc. 2" and above Buttweld B366 Gr. CRHC276 Annealed Seamless, B16.9

Nipples and Swages 2" and under Seamless B366 Gr. CRHC276 Annealed


SP97 Socketweld/

Threaded B462 N10276 Annealed, MSS-SP97

Weldolets 2" and above Buttweld B462 N10276 Annealed, MSS-SP97

1½" and under Class 150 Socketweld RF B462 N10276 Annealed, B16.5 (8) FLANGES

2" and above Class 150 Weldneck RF B462 N10276 Annealed, B16.5 BOLTING A193 G. B7M stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2HM

GASKETS Spiral-wound, N10276 windings, flexible graphite filled with carbon steel outer ring, per B16.20. N10276 Inner Ring


B462 N10276 body, BB, OS&Y, graphite packing, API 602, Trim N10276

(6)

GATE VALVES

2" and above Class 150 RF Flanged B462 N10276 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim N10276

(6)


B462 N10276 body, BB, OS&Y, graphite packing,Trim N10276

(6) GLOBE VALVES

2" and above Class 150 RF Flanged B462 N10276 body, BB, OS&Y, graphite packing, Trim N10276

(6)

1½" and under Class 800 Socketweld

B462 N10276 body, BB, Trim N10276, hydraulically tested,

(6) CHECK VALVES

2" and above Class 150 RF Flanged B462 N10276 body, BB, Trim N10276, hydraulically tested,

(6)






of 403

10.27.3 Line Class: 101NT1P

Line Class: 101NT1P Basic Material: Alloy 20 Max. Temperature: 325°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size

Rating Schedule

Type

Specification

Notes

1½" and under Sch. 40S min. Seamless B464, (UNS N08020) (1) PIPE 2" to 12" Sch 10S min. Seamless B464 (UNS N08020) (1)

1½" and under Class acc. to B16.11 Socketweld/ Threaded B366, (UNS N08020), B16.11 (4) FITTINGS

El's, Tees

Reducers, Caps, Couplings, etc.

2" and above Buttweld B366 (UNS N08020), B16.9 (5)

Nipples and Swages ½"-1½" Seamless B464, (UNS N08020)


SP97 Socketweld/

Threaded B462 (UNS N08020), B16.11 (4)

Weldolets 2" and above Buttweld B462 (UNS N08020), B16.9

1½" and under Class 150 Socketweld RF B462 (UNS N08020), B16.5

FLANGES 2" and above Class 150 Weldneck

RF B462 (UNS N08020), B16.5 (8)

BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts.


1½" and under Class 800 Socketweld B462 (UNS N08020) body, BB, OS&Y, Trim No.13

(6) GATE VALVES

2" to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13

(6)


(6) GLOBE VALVES


(6)

1½" and under Class 800 Socketweld B462 (UNS N08020) body, BC, Trim No.13

(6) CHECK VALVES

2" to 12" Class 150 RF Flanged A351-CN7M body, BC, Trim No.13

(6)


B462 (UNS N08020) body, API 599, RTFE Sleeve and Packing

(6) PLUG VALVES

2" to 12" Class 150 RF Flanged A351-CN7M body, API 599, RTFE Sleeve and Packing (6)


B462 (UNS N08020) body, floating ball, RTFE seats and seals, Trim No.13, fire safe

(6)(7)

BALL VLAVES

2" to 12" Class 150 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe

(6)(7)






of 403

10.27.4 Line Class: 103NT1P

Line Class: 103NT1P Basic Material: Alloy 20 Max. Temperature: 325°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size Rating

Schedule

Type

Specification

Notes 1½" and under Sch. 40S min. Seamless B464, (UNS N08020) (1) PIPE

2" to 12" Sch 10S min. Seamless B464 (UNS N08020) (1)


El's, Tees





SP97 Socketweld/

Threaded B462 (UNS N08020), B16.11 (4)




RF B462 (UNS N08020), B16.5 (8)




(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES


(6)


B462 (UNS N08020) body, API 599, RTFE Sleeve (6)

PLUG VALVES 2" to 12" Class 300 RF Flanged A351-CN7M body, API 599,

RTFE Sleeve and Packing (6)


B462 (UNS N08020) body, floating ball, RTFE seats and seals, Trim No.13, fire safe

(6)(7)

BALL VLAVES

2" to 12" Class 300 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe

(6)(7)






of 403

10.27.5 Line Class: 103NY1P

Line Class: 103NY1P Basic Material: Hastelloy C Max. Temperature: 425°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size

Rating Schedule

Type

Specification

Notes

1½" and under Sch. 40S min. Seamless B619, (UNS N06003) (1) PIPE 2" to 12" Sch 10S min. Seamless B619, (UNS N06003) (1)


El's, Tees





SP97 Socketweld/

Threaded B462 (UNS N06003), B16.11 (4)




RF B462 (UNS N06003), B16.5 (8)



1½" and under Class 800 Socketweld B462 (UNS N06003) body, BB, OS&Y, Trim No. N06003

(6) GATE VALVES

2" to 12" Class 300 RF Flanged Hastelloy C UNS N06003 body, BB, OS&Y, Trim No. N06003

(6)


(6) GLOBE VALVES


(6)

1½" and under Class 800 Socketweld B462 (UNS N06003) body, BC, Trim No. N06003

(6) CHECK VALVES

2" to 12" Class 300 RF Flanged Hastelloy C UNS N06003 body, BC, Trim No. N06003

(6)


Hastelloy C UNS N06003 body, floating ball, RTFE seats and seals, Trim No. N06003, fire safe

(6)(7)

BALL VALVES

2" to 12" Class 300 RF Flanged B462 (UNS N06003) body, floating ball, RTFE seats and seals, Trim No. N06003, fire safe

(6)(7)


Hastelloy C UNS N06003 body, API 599, RTFE Sleeve and Packing

(6) PLUG VALVE

2" to 12" Class 300 RF Flanged B462 (UNS N06003) body, API 599, RTFE Sleeve and Packing (6)






of 403

10.27.6 Line Class: 215NS1P

Line Class: 215NS1P Basic Material: Alloy 825 Max. Temperature: 538°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25

Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested, Welds 100%Xray



PIPE Up to 8"

Seamless or Welded

B423 N08825 Seamless Annealed B705 N08825 Welded Annealed

(1) (2)

1½" and under

Socketweld B366 Gr. WPNICMC, B16.11 Annealed (5)

FITTINGS


Couplings etc. 2" and above Buttweld B366 Gr. WPNICMC Annealed Seamless/Welded, B16.9 (5)

Nipples and Swages 2" and under Seamless B423 N08825 Annealed

Sockolets 1½" and under Socketweld B564 N08825 Annealed, MSS-SP97 Weldolets 2" and above Buttweld B564 N08825 Annealed, MSS-SP97

FLANGES All Class 1500 Weldneck RTJ B564 N08825 Annealed, B16.5 (8)

BOLTING A193 G. B7 stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2H GASKETS Octagonal Ring N08825 B16.20

1½" and under Class 1500 Socketweld B564 N08825 body, WB, OS&Y, graphite packing, API 602, Trim N08825

(6)

GATE VALVES

2" and above Class 1500 RTJ Flanged B564 N08825 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim N08825

(6)

1½" and under Class 1500 Socketweld B564 N08825 body, WB, OS&Y, graphite packing, Trim N08825

(6) GLOBE VALVES

2" and above Class 1500 RTJ Flanged B564 N08825, PSB, OS&Y, graphite packing, Trim N08825

(6)

CHECK VALVES 3/4“ – 8” Class 1500 RTJ Flanged B564 N08825 body, PSB, Trim N08825, hydraulically tested, Swing type

(6)






of 403

10.27.7 Line Class: 225NS1P

Line Class: 225NS1P Basic Material: Alloy 825 Max. Temperature: 538°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25




PIPE Up to 8" calculate Seamless or Welded


(1) (2)

FITTINGS


etc.

2" and above Buttweld B366 Gr. WPNICMC Annealed Seamless/Welded, B16.9 (5)



BOLTING A193 G. B7 stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2H GASKETS Octagonal Ring N08825 B16.20

1½" and under Class 2500 RTJ Flanged B564 N08825 body, WB, OS&Y, graphite packing, API 602, Trim N08825

(6)

GATE VALVES


(6)

1½" and under Class 2500 RTJ Flanged B564 N08825 body, WB, OS&Y, graphite packing, Trim N08825

(6) GLOBE VALVES


(6)


(6)






of 403

10.28 Specialty Alloys For Caustic Service Line Classes


The following Notes shall apply to all of this specialty alloys class family and shall be considered as an integral part of the individual line class.

Notes:





(4) Seal Welding







Use ¾" valves for vent and drain connections as minimum.

(7) Valve Trim


(8) Flanges







of 403

10.28.2 Line Class: 101NT1C

Line Class: 101NT1C Basic Material: Alloy 20 Max. Temperature: 138°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size Rating

Schedule

Type

Specification

Notes 1½" and under Sch. 40S min. Seamless B464, (UNS N08020)

(1) PIPE 2" to 12" Sch 10S min. Seamless B464 or B474,

(UNS N08020) (1)

1½" and under Class acc. to B16.11 Socketweld B366, (UNS N08020), B16.11 (4) FITTINGS

El's, Tees Reducers, Caps, Couplings, etc.



Sockolets 1½" and under Class acc. to MSS SP97 Socketweld B462 (UNS N08020), B16.11 (4)




RF B462 (UNS N08020), B16.5 (8)

BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 1.5 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or equal.


(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES


(6)



(6) PLUG VALVES







of 403

10.28.3 Line Class: 103NT1C

Line Class: 103NT1C Basic Material: Alloy 20 Max. Temperature: 138°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size Rating

Schedule

Type

Specification

Notes 1½" and under Sch. 40S min. Seamless B464, (UNS N08020) (1)

PIPE 2" to 12" Sch 10S min. Seamless B464 or B474,

(UNS N08020) (1)




Nipples and Swages ½"-1½" Seamless B464 (UNS N08020)

Sockolets 1½" and under Class acc. to MSS SP97 Socketweld B462 (UNS N08020), B16.11 (4)




RF B462 (UNS N08020), B16.5 (8)



(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES


(6)



(6) PLUG VALVES







of 403

10.28.4 Line Class: 103NY1C

Line Class: 103NY1C Basic Material: Hastelloy C Max. Temperature: 125°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size Rating

Schedule

Type

Specification

Notes 1½" and under Sch. 40S min. Seamless B619, (UNS N06003) as

applicable (1) PIPE

2" to 12" Sch 10S min. Seamless B619, (UNS N06003) as applicable (1)




Nipples and Swages ¾”-1½" Seamless B464 (UNS N06003)

Sockolets 1½" and under Class acc. to MSS SP97

Socketweld/ Threaded B462 (UNS N06003), B16.11 (4)




RF B462 (UNS N06003), B16.5 (8)



(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)

1½" and under Class 800 Socketweld B462 (UNS N06003) body, BC, Trim No. N06003

(6) CHECK VALVES

2" to 12" Class 300 RF Flanged Hastelloy C UNS N06003 body, BC, Trim No. N06003

(6)

PLUG VALVE 1½" and under Class 800 Socketweld with nipples

Hastelloy C UNS N06003 body, API 599, RTFE Sleeve and Packing

(6)

2" to 12" Class 300 RF Flanged B462 (UNS N06003) body, API 599, RTFE Sleeve and Packing

(6)






of 403

10.29 Specialty Alloy Steel for Sulfuric Acid Services Line Classes



Notes:





(4) Seal Welding






(7) Valve Trim


(8) Flanges







of 403

10.29.2 Line Class: 101NT0A

Line Class: 101NT0A Basic Material: Alloy 20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid 93%-96% concentr. Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25

Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size Rating

Schedule

Type

Specification


2" to 12" Sch 10S min. Seamless B464 (UNS N08020) (1) FITTINGS

El's, Tees


¾” and above Buttweld B366 (UNS N08020), B16.9 (5)

Weldolets ¾” and above Buttweld B462 (UNS N08020), B16.9

FLANGES ¾” and above Class 150 Weldneck RF B462 (UNS N08020), B16.5 (8)


Gate Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13

(6)

Globe Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13

(6)

Check Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BC, Trim No.13

(6)

Ball Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe

(6)(7)






of 403


Line Class: 101NT1A Basic Material: Alloy 20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid 93%-96% concentr. Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25



Item

Size Rating

Schedule

Type

Specification


2" to 12" Sch 10S min. Seamless B464 (UNS N08020) (1) FITTINGS

El's, Tees






Gate Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13

(6)

Globe Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13

(6)

Check Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BC, Trim No.13

(6)

Ball Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe

(6)(7)






of 403


Line Class: 101NT9A Basic Mat.: Zecor™+Alloy 20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid 93%-96% concentr. Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25



Item

Size

Rating Schedule

Type

Specification

Notes

¾” and under Sch. 40S min. Seamless B464 (UNS N08020) (1) PIPE 1" and above Sch. 10S min. Seamless Zecor™ (1)

¾” and under Socketweld B462 (UNS N08020), B16.11 FITTINGS

El's, Tees


1” and above Buttweld Zecor™, B16.9 (5)


¾” and under Socketweld RF B462 (UNS N08020), B16.5

FLANGES 1” and above Lap Joint

A105 Epoxy painted or A182 Gr. F304

Stub end shall be of Zecor™

(8)

BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 3.0 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or Goretex GR

Gate Valves ½” and above Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13

(6)

Plug Valve ½” and above Class 150 RF Flanged A351-CN7M body, BB, Alloy 20 Plug, TFE sleeve & Trim

(6)

Globe Valves ½” and above Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13

(6)

Check Valves ½” and above Class 150 RF Flanged A351-CN7M body, BC, Trim No.13

(6)

Ball Valves ½” and above Class 150 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe

(6)(7)

3” to 12” Class 150 Wafer Butterfly Valves 14” and above Class 150 Lug

A351-CN7M body, Alloy 20 Stem, Disc and Pin, TFE Seats, Shaft Bearing and Packing

Needle Valve ½” Class 3000 Threaded


Sampling Valve ¼” to ¾” Class 300 Threaded male

inlet Plain end outlet







of 403


Line Class: 103NT0A Basic Material: Alloy 20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size Rating

Schedule

Type

Specification

Notes 12" and under Sch. 40S min. Seamless B464 (UNS N08020) (1) 14" and 16" S-10S as min Seamless B464 (UNS N08020) (1) PIPE 18" and 20" calculate Seamless B464,

(UNS N08020) (1)

FITTINGS

El's, Tees Reducers, Caps,

etc.





Gate Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13

(6)

Globe Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13

(6)

Check Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BC, Trim No.13

(6)

Ball Valves ¾” and above Class 300 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals,

Trim No.13, fire safe

(6)(7)






of 403


Line Class: 103NT1A Basic Material: Alloy 20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size Rating

Schedule

Type

Specification

Notes 12" and under Sch. 40S min. Seamless B464 (UNS N08020) (1) 14" and 16" S-STD Seamless B464 (UNS N08020) (1) PIPE 18" and 20" S-XS Seamless B464,

(UNS N08020) (1)

FITTINGS

El's, Tees Reducers, Caps,

etc.






(6)


(6)


(6)

Ball Valves ¾” and above Class 300 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals,

Trim No.13, fire safe

(6)(7)






of 403


Line Class: 103NT9A Basic Material: Zecor™+Alloy20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.8 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size Rating

Schedule

Type

Specification

Notes ¾" and under Sch. 40S min. Seamless B464, (UNS N08020) (1) PIPE 1" and above Sch 10S min. Seamless Zecor™ (1)

¾” and under Socketweld B462 (UNS N08020), B16.11 FITTINGS

El's, Tees


1” and above Buttweld Zecor™, B16.9 (5)


¾” and under Socketweld RF B462 (UNS N08020), B16.5

FLANGES 1” and above Lap Joint

A105 Epoxy painted or A182 Gr. F304

Stub end shall be of Zecor™

(8)

BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 3.0 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, Goretex GR


(6)

Plug Valve ½” and above Class 300 RF Flanged A351-CN7M body, BB, Alloy 20 Plug, TFE sleeve & Trim

(6)


(6)


(6)

Ball Valves ¾” and above Class 300 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe

(6)(7)

3” to 12” Class 300 Wafer Butterfly Valves 14” and above Class 300 Lug

A351-CN7M body, Alloy 20 Stem, Disc and Pin, TFE Seats, Shaft Bearing and Packing

Needle Valve ½” Class 3000 Threaded


Sampling Valve ¼” to ¾” Class 300 Threaded male

inlet Plain end outlet







of 403

10.30 Specialty Alloys For Ammonium Bisulfide Service Line Classes


The following Notes shall apply to all of the alloy steel classes family and shall be considered as an integral part of the individual line class.

Notes:



(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1. For Alloy 825 material based line class, fluid velocities shall be within the range of 10-50 ft/s (target 40 ft/s).

For Duplex S32205 material based line class, fluid velocities shall be within the range of 10-30 ft/s (target 25 ft/s).


(4) Seal Welding



Schedule of fittings and weldneck flanges shall be same as the pipe. Dead legs shoul be avoided.



(7) Valve Trim


(8) Flanges







of 403

10.30.2 Line Class: 103SP1N

Line Class: 103SP1N Basic Material: Duplex S32205 Max. Temperature: 316°C Stress Relief: Per Code Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Weld 100%XRay

Temperature (°C) (2) -48 100 150 200 300 316 Pressure Rating (bar) (2) 51.7 50.7 45.9 42.7 38.9 38..5

Item

Size Rating

Schedule

Type

Specification

Notes

PIPE ¾” and above To calculate Seamless

or Welded

A790 Gr. UNS S32205 (1) (2)

1½" and under



El's Tees,




Sockolets 1½" and under Class acc. to MSS SP97 Socketweld A182 Gr. F51, MSS SP97



All Class 300 Weldneck RF A182 Gr. F51, B16.5

(8) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.


(6)

GATE VALVES

2" and above Class 300 RF Flanged A928 Gr. UNS S32205 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 2205/HF

(6)


(6) GLOBE VALVES

2" and above Class 300 RF Flanged A928 Gr. UNS S32205, OS&Y, graphite packing, Trim 2205/HF

(6)


(6) CHECK VALVES

2" and above Class 300 RF Flanged A928 Gr. UNS S32205 body, BC, Trim 2205/HF

(6)






of 403

10.30.3 Line Class: 215NS1N

Line Class: 215NS1N Basic Material: Alloy 825 Max. Temperature: 538°C Stress Relief: Per Code Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25




PIPE Up to 8"

Seamless or Welded


(1) (2)

1½" and under

Socketweld B366 Gr. WPNICMC, B16.11 Annealed (5)

FITTINGS


Couplings etc. 2" and above Buttweld B366 Gr. WPNICMC Annealed Seamless/Welded, B16.9 (5)

Nipples and Swages 2" and under Seamless B423 N08825 Annealed

Sockolets 1½" and under Socketweld B564 N08825 Annealed, MSS-SP97 Weldolets 2" and above Buttweld B564 N08825 Annealed, MSS-SP97


BOLTING A193 G. B7M stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2HM GASKETS Octagonal Ring N08825 B16.20

1½" and under Class 1500 Socketweld B564 N08825 body, WB, OS&Y, graphite packing, API 602, Trim N08825

(6)

GATE VALVES


(6)

1½" and under Class 1500 Socketweld B564 N08825 body, WB, OS&Y, graphite packing, Trim N08825

(6) GLOBE VALVES


(6)


(6)






of 403

10.30.4 Line Class: 225NS1N

Line Class: 225NS1N Basic Material: Alloy 825 Max. Temperature: 538°C Stress Relief: Per Code Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25




PIPE Up to 8" calculate Seamless or Welded


(1) (2)

FITTINGS


etc.

2" and above Buttweld B366 Gr. WPNICMC Annealed Seamless/Welded, B16.9 (5)



BOLTING A193 G. B7M stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2HM GASKETS Octagonal Ring N08825 B16.20

1½" and under Class 2500 RTJ Flanged B564 N08825 body, WB, OS&Y, graphite packing, API 602, Trim N08825

(6)

GATE VALVES


(6)

1½" and under Class 2500 RTJ Flanged B564 N08825 body, WB, OS&Y, graphite packing, Trim N08825

(6) GLOBE VALVES


(6)


(6)






of 403

10.31 Specialty Alloys For Chlorination Service Line Classes


The following Notes shall apply to all of the alloy steel classes family and shall be considered as an integral part of the individual line class.

Notes:



(2) Threaded connections only allowed downstream of vents, drains, hydrotest connections, and instrument take-offs. Threaded O'lets only allowed for thermowell and hydrotest connections.

(3) Schedule of fittings and weldneck flanges to be same as pipe.

(4) Use flanges.

(5) Use ¾" valves for vent and drain connections





of 403

10.31.2 Line Class: 201NR1Q

Line Class: 201NR1Q Basic Material: Alloy 800H Max. Temperature: 538°C Stress Relief: Per Code Service: Chlorination Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 150 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size Rating

Schedule

Type

Specification

Notes

1½” and under Sch. 80S min. Seamless B407, (UNS N08810) Annealed (1)

PIPE 2” to 8” Sch 10S min. Seamless B407, (UNS N08810)

Annealed (1)


B564, (UNS N08810), B16.11 Annealed (3) FITTINGS

El’s, Tees


2” and above Buttweld B366, (UNS N08810) Annealed, B16.9 (3)

Nipples and Swages ½”-1½” Sch 80S Seamless B407, (UNS N08810)

Annealed

Sockolets/ Threadolets 1½” and under Class 6000 Socketweld/

Threaded B564, (UNS N08810),

Annealed B16.11 (2)

Weldolets 2” and above Buttweld B366, (UNS N08810), B16.9 Annealed

1½” and under Class 150 Socketweld RJ

B564, (UNS N08810), B16.5 Annealed

FLANGES 2” and above Class 150 Weldneck

RJ B564, (UNS N08810), B16.5

Annealed (3)

BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Octagonal ring, Nickel 201, 95 BHN maximum hardness.

1½” and under Class 150 Socketweld A351-CT15C or

A494-CY-40 body and trim, BB, OS&Y, full port, API 602

(5)

Gate Valves

2” and above Class 150 RJ Flanged A351-CT15C or

A494-CY-40 body and trim, BB, OS&Y, API 600

1½” and under Class 150 Socketweld A351-CT15C or

A494-CY-40 body and trim, BB, OS&Y

Globe Valves

2” and above Class 150 RJ Flanged A351-CT15C or


1½” and under Class 150 Socketweld A351-CT15C or A494-CY-40 body and trim

Check Valves 2” and above Class 150 RJ Flanged A351-CT15C or

A494-CY-40 body and trim






of 403

10.31.3 Line Class: 203NR1Q

Line Class: 203NR1Q Basic Material: Alloy 800H Max. Temperature: 593°C Stress Relief: Per Code Service: Chlorination Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 300 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested


Item

Size Rating

Schedule

Type

Specification

Notes 1½" and under Sch. 80S min. Seamless B407, (UNS N088(10) (1) PIPE

2" to 30" Sch 10S min. Seamless B407, (UNS N088(10) (1)

1½" and under Class 3000 Socketweld/ Threaded B564, (UNS N0088(10), B16.11 (3) FITTINGS

El's, Tees


2" and above Buttweld B366, (UNS N088(10), B16.9 (3)

Nipples and Swages ½"-1½" Sch 80S Seamless B407, (UNS N088(10)

Sockolets/ Threadolets 1½" and under Class 6000 Socketweld/

Threaded B564, (UNS N088(10), B16.11 (2)

Weldolets 2" and above Buttweld B366, (UNS N088(10), B16.9

1½" and under Class 300 Socketweld RJ B564, (UNS N088(10), B16.5


RJ B564, (UNS N088(10), B16.5 (3)

BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Octagonal ring, Nickel 210, 95 BHN maximum hardness.

1½" and under Class 300 Socketweld A351-CT15C or

A494-CY-40 body and trim, BB, OS&Y, full port, API 602

Gate Valves

2" and above Class 300 RJ Flanged A351-CT15C or

A494-CY-40 body and trim, BB, OS&Y, API 600

1½" and under Class 300 Socketweld A351-CT15C or


Globe Valves

2" and above Class 300 RJ Flanged A351-CT15C or


1½" and under Class 300 Socketweld A351-CT15C or A494-CY-40 body and trim, BC

Check Valves 2" and above Class 300 RJ Flanged A351-CT15C or

A494-CY-40 body and trim, BC






of 403

10.32 Couper Nickle and others for Water Services Line Classes



The following Notes shall apply to all of this couper nickle class family and shall be considered as an integral part of the individual line class.

Notes:





(4) Seal Welding






(7) Valve Trim


(8) Flanges




90/10 Copper Nickel pipe and fittings is normally used only in pipe sizes up to 4-inch NPS. It is used mainly for seawater but may be used for other corrosive water.





of 403

10.32.2 Line Class: 301BD0W

Line Class: 301BD0W Basic Material: Copper Nickel Max. Temperature: 100°C Stress Relief: Per Code Service: Utilities, Fire Water Code: ASME B31.3 Min. Temperature: 0.0°C Butt-weld Per ASME B16.25 Rat. Class: 150 FF B16.1/B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: per EEMUA

Temperature (°C) (2) 0 38 50 75 100 Pressure Rating (bar) (2) 20.0 20 19.7 18.6 17.5


PIPE/TUBE ½" - 16" Calculate Seamless ½" - 2" Socket Weld FITTINGS

Elbows-90 deg 3" - 16" Long Radius Butt Weld (5) Elbows-45 deg 6" - 16" Long Radius Butt Weld

½" - 2" Socket Weld, 3" - 16" Butt Weld,

1½" x 1½" x 1" Socket Weld, Reducing Tees 6" x 6" x 4" -

16" x 16" x 12"

Match pipe

Butt Weld, Reducing

½" - 2" Socket Weld Couplings 1" x ½" -

2" x 1" Socket Weld, Reducing

Plug ½" Hexagon Reducers 3" x 2" - 16" x 10" Butt Weld, Concentric

Adapter 16mm API x ½ Male end for insertion into fitting Female Thread x Male

Socket Weld

EEMUA 144 C70610

Connectors ½" - 2" Socket weld, straight, with male threads for connecting Cu-Ni Pipe to Female Threaded Bronze Valves

EEMUA 146 C70610

2" - 4" Class 125/150 Composite, Blind Disc 90/10 Cu-Ni, ASME B16.5 dimensions, 5mm thick, to BS 2871

FLANGES 6" - 16" Class 150 Composite Slip

On

90/10 Cu-Ni (UNS C70610) to BS 2871, Part 2 and EEMUA Publication No. 145, Section 2.2 and 2.3.90/10 Cu-Ni inner stub end, ASTM, A105N backing flange, Class 150, Galv. to BS729

(8)

BLIND (BLANK) 2" - 4" Class 150 Forged steel, A105N, Flat Face, Galv. to BS 729 GASKETS 1.6 mm Synthetic fiber

BOLTING ASTM A193 B7 Stud Bolts,semi-finished, heavy patternASTM A194 2H hex nuts

2" and below Class 150 Threaded Bronze body and trim ASTM

B61/B62, ISRS, MSS-SP-80 (6) GATE VALVES

3" and above Class 150 FF Flanged Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BB

(6)

2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, ISRS, MSS-SP-80

(6) GLOBE VALVES


(6)

2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, MSS-SP-80

(6) CHECK VALVES

3" and above Class 150 FF Flanged Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BC

(6) BALL VALVES 2" and below Class 150 Threaded Bronze body and trim B61/B62, TFE seats, fire s. (6)(7) BUTTERFLY

VALVES 3" and above Class 150 wafer or lug or FF Flanged

Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR






of 403

10.32.3 Line Class: 101CS2W

Line Class: 101CS2W Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: WWT, Sanitary W. Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item Size Rating


¾" S-XXS 1” to 2” S-160 3" to 4” S-80

6" to 10” S-40 12" to 18” S-20


(1) (2) PIPE






API 5L Gr. B


SP 97 Socketweld/

Threaded A105N

MSS SP 97 (4)







(6) GATE VALVES

2" and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)



(6) GLOBE VALVES


(6)




A105N body, floating ball, RTFE seats,Trim No. 10, fire safe (6)(7)

2" to 4" Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6)(7) BALL VALVES

6" and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim ENP (6)(7)


A105N body, BC, not-lubricat.,PTFE Sleeve and Pack.,

(6) PLUG VALVES

2" and above Class 150 RF Flanged A216-WCB body, BC PTFE Sleeve and Pack. API 599,

(6) BUTTERFLY


A395 body, fire-safe, API 609 Cat. A, Seats: Buna-N, Ductile Iron Disc






of 403

10.32.4 Line Class: 101CS4W Line Class: 101CS4W Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: WWT, Brine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Per Code



Up to 2" S-XXS 3" S-160 4" S-120 6” S-80

8” to 10” S-60 12” to 16” S-40

18” S-30


(1) (2) PIPE

20” and above Calculate Welded API 5L Gr B (3) FITTINGS El's Tees,


1" and above





2" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No. 8

(6) GATE VALVES

2½" and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 8

(6)


(6) GLOBE VALVES

2½" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8

(6) 2" and under Class 150 RF Flanged A105N body, BC, Trim No. 1 (6)

CHECK VALVES 2½" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 1 (6) 2" and under Class 150 RF Flanged A105N body, floating ball, RTFE

seats,Trim No. 10, fire safe (6)(7)


(6)(7) BALL VALVES


(6)(7)

1½" and under Class 150 RF Flanged A105N body, BC, not-lubricat.,PTFE Sleeve and Pack.,

(6) PLUG VALVES

2" and above Class 150 RF Flanged A216-WCB body, BC PTFE Sleeve and Pack. API 599,

(6) BUTTERFLY


A395 body, fire-safe, API 609 Cat. A, Seats: Buna-N, Ductile Iron Disc






of 403

10.32.5 Line Class: 101SR0W

Line Class: 101SR0W Basic Material: SS 304 Max. Temperature: 538°C Stress Relief: Per Code Service: Potable, serv. Wat. Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP304 PIPE


1½" and under


FITTINGS





Threaded A182 Gr. F304, MSS-SP97


1½" and under Class 150 Socketweld RF A182 Gr. F304, B16.5 (8) FLANGES

2" and above Class 150 Weldneck RF A182 Gr. F304, B16.5 BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.



(6)

GATE VALVES



(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES


(6)


A182-F304 body, floating ball, RTFE seats, Trim No. 10, fire safe

(6)(7)

BALL VALVES

2” and above Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 608,Trim No. 10

(6)(7)


Flanged A351-CF8M body, API 609 Cat. A, Trim No. 10






of 403


Line Class: 103SR0W Basic Material: SS 304 Max. Temperature: 538°C Stress Relief: Per Code Service: Treated Wat Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP304 PIPE


1½" and under


FITTINGS











(6)

GATE VALVES



(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES


(6) BUTTERFLY


A351-CF8M body, API 609 Cat. A, Trim No. 10






of 403


Line Class: 106SR0W Basic Material: SS 304 Max. Temperature: 538°C Stress Relief: Per Code Service: Treated Wat Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code


Item

Size Rating

Schedule

Type

Specification

Notes

Up to 6" S-40S as min

Seamless

A312 Gr. TP304

8” to 12” S-40S as min PIPE

14" and above calculate Welded A358 Gr. 304 Cl. 1

1½" and under


FITTINGS











(6)

GATE VALVES



(6)



(6) GLOBE VALVES


(6)



(6) CHECK VALVES


(6) BUTTERFLY


A351-CF8M body, API 609 Cat. A, Trim No. 10






of 403

10.33 Non-Metallic Line Classes


The following Notes are on hold (To be confirmed in final version). Notes:





(4) Seal Welding






(7) Valve Trim


(8) Flanges


(9) Additional

PVC/UPVC pipe and fittings are used for water services, except for dedicated firewater, up to a temperature of 49°C, normally below ground. SAS 14/15 class 5 pipe for water services outside buildings and ASTM D1785 schedule 80 pipe for inside and outside buildings. Refer to JERES-S-040 and JERES-S-060.

CPVC pipe and fittings are used for hot water service up to 71°C temperature. Other refinery services include sodium hypochlorite, chlorinated water. Refer to JERES-L-1032 and JERES-S-060.

Reinforced thermosetting resin (RTR) pipe and fittings per 01-JERMS-1034 with restrained and unrestrained joints may be used for water services within the given pressure/temperature limits, including buried firewater piping. It may also be used for sanitary sewer, oily water sewer, and other gravity and pressure sewers.





of 403

10.33.2 Line Class: 301FE0P

Line Class: 301FE0P Basic Material: Fiberglass Max. Temperature: 100°C Stress Relief: Not Applicable Service: Sea Water Code: ASME B31.3 Min. Temperature: 0.0°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.

Temperature (°C) (2) 0 100 Pressure Rating (bar) (2) 17.5 17.5


PIPE 50 - 3700 mm Refer to JERMS-L-1034

Refer to JERMS-L-

1034

JERMS-L-1034 RTR Pipe and Fittings, 0 to 100°C

FITTINGS & FLANGES 50 - 3700 mm Refer to

JERMS-L-1034

Refer to JERMS-L-

1034

Shall be made by the Manufacturer supplying the pipe (5)(8)

GASKETS 3.2 mm 50-60 Shore A durometer elastomeric Full face elastomeric, 50-60 Shore A durometer

BOLTING All Sizes ASTM A307 Grade A or B bolts with ASTM A563 Grade A heavy hex nuts

CHECK VALVES 2" and above Class 150 wafer or lug

or FF Flanged

A105N, Dual plate, Seating BUNA-N, Al-BR Disc,Spring Inconel (6)

BUTTERFLY VALVES 2" and above Class 150

wafer or lug or FF

Flanged

DI A395 PTFE/EPDM Lined, API 609, 17-4PH stem, EPDM coated disc, PTFE packing

PLUG VALVES 2" and above Class 150 FF Flanged DI A395 PTFE/EPDM Lined, BC, PFA coated ductile iron plug, diaphragm PTFE

(6)

DIAPHRAGM VALVE 2” and above Class 150 FF

Flanged DI A395, internally rubber coated, EPDM sealing






of 403

10.33.3 Line Class: 301FE0W

Line Class: 301FE0W Basic Material: Fiberglass Max. Temperature: 100°C Stress Relief: Not Applicable Service: Utility Water Code: ASME B31.3 Min. Temperature: 0.0°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.

Temperature (°C) (2) 0 100 100 Pressure Rating (bar) (2) 17.5 17.5 17.5


PIPE 25 - 3700 mm

Refer to JERMS-L-1034

Refer to JERMS-L-

1034

JERMS-L-1034 RTR Pipe and Fittings, 0 to 100°C


JERMS-L-1034

Refer to JERMS-L-

1034

Shall be made by the Manufacturer supplying the pipe (5)(8)

GASKETS 3.2 mm 50-60 Shore A durometer elastomeric

Full face elastomeric, 50-60 Shore A durometer



(6) GATE VALVES

3" and above Class 150 FF Flanged

Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BB

(6)


(6) GLOBE VALVES


Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BB

(6)


(6) CHECK VALVES


Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BC

(6)

BALL VALVES 2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, TFE seats, fire safe

(6)(7)


wafer or lug or FF Flanged







of 403

10.33.4 Line Class: 301FE0A

Line Class: 301FE0A Basic Material: Fiberglass Max. Temperature: 82°C Stress Relief: Not Applicable Service: Weak sulfuric acid 2% - 30% Code: ASME B31.3 Min. Temperature: 0.0°C Butt-weld: Manufact. Stand.

Rating Class: 150 FF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.


Item Size (ID) Rating Schedule Type Specification Notes

6” smaller 6,35 mm as minimum 8” to 10” 7.93 mm

12” to 14” 9,53 mm 16” 11.12 mm

18” to 20” 12,7 mm 24” 15.88 mm

PIPE

30” 19,05 mm


Reinforced Vinyl Ester Pipe Hetron 922 or approved resin


JERMS-L-1034


Shall be made by the Manufacturer supplying the pipe, no miter elbow. However, saddle fabricated pipe to pipe fittings in lieu of tees are acceptable

(5)(8)

GASKETS 3.2 mm elastomeric

Full face Butyl Rubber, 50-60 Shore A durometer


(6) PLUG VALVES All Class 150 FF Flanged

Teflon Lined DI , BB, Viton Sleeve and Packing (6)

(6) CHECK VALVES All Class 150 FF Flanged

Teflon Lined DI , BB, Viton Seats and Seal (6)

BALL VALVES All Class 150 FF Flanged

Teflon Lined DI , BB, Viton Seats and Packing, fire safe

(6)(7) BUTTERFLY

VALVES All Class 150 FF Flanged

Teflon Lined DI , BB, PFA lined disc Viton Seat and Seal






of 403

10.33.5 Line Class: 301PU0A

Line Class: 301PU0A Basic Material: C-PVC Max. Temperature: 82°C Stress Relief: Not Applicable Service: Weak sulfuric acid 2% - 30% Code: ASME B31.3 Min. Temperature: 4.0°C Butt-weld: Manufact. Stand.

Rating Class: 150 FF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.

Temperature (°C) (2) 4.0 82 Pressure Rating (bar) (2) Gravity Drain/Atmosphere


PIPE ½"- 6" Sch. 80 CPVC ASTM F441 CPVC 4120

(5)

FITTINGS FOR SOLVENT WELD

JOINTS Bushings Couplings

Elbows Tees

½"- 6" Sch. 80 CPVC ASTM F439 CPVC 4120, Sch. 80

Pipe Union ½"- 3" Sch. 80 CPVC ASTM F439 CPVC female socket by male IPS adaptor

FLANGES

Socket Type

¾"- 6" Class 150, Sch. 80 Flat Face ASTM F439 CPVC, Sch. 80

Class 150 FF (8)

Threaded type ½"- 2" Class 150, Sch. 80 Flat Face ASTM F437 CPVC

Class 150 FF

GASKETS 3.2 mm elastomeric Butyl Rubber Full Face, 50-60 Shore A durometer

BOLTING All Sizes ASTM A307 Grade A or B

bolts, ASTM A563 Grade A heavy hex nuts

SOLVENT CEMENT ASTM F493 CPVC to PVC or CPVC

GATE VALVES 4" and larger Class 150 FF Flanged Forged Steel body, BB, OS&Y, 316 SS Stem, Integral Seats, TFE pack, Gask Spiral woun 316+TFE

(6)

BUTTERFLY VALVES 4" and larger Class 150

Wafer or Lug or

FF Flanged

Ductile iron PTFE lined body, PFA (or PTFE) encapsulated disc, Graphite filled phenolic bearings, Viton stem seals

PLUG VALVE ½" and above Class 150 FF Flanged DI body, BB, Electrically grounded 316 plug, TFE sleeve and diaphragm (6)






of 403

10.33.6 Line Class: 301PU0P

Line Class: 301PU0P Basic Material: C-PVC Max. Temperature: 80°C Stress Relief: Not Applicable Service: Calcium Hypocl. Sol. A/G Code: ASME B31.3 Min. Temperature: 4.0°C Butt-weld: Manufact. Stand.

Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.






Elbows Tees


(5)


FLANGES

Socket Type


Class 150 FF (8)


Class 150 FF

GASKETS 3.2 mm 50-60 Shore A durometer elastomeric Full face elastomeric,

50-60 Shore A durometer



SOLVENT CEMENT ASTM F493 CPVC to PVC or CPVC Ball Valves

And Ball Check Valves

3" and smaller 150 psi Threaded

Socketweld Flanged FF

CPVC ASTM D1784 CL. 23447-B body and ball, EPDM seats, double union, fire safe

(6)(7)






of 403

10.33.6 Line Class: 301PU0W

Line Class: 301PU0W Basic Material: C-PVC Max. Temperature: 80°C Stress Relief: Not Applicable Service: Utility Water U/G Code: ASME B31.3 Min. Temperature: 4.0°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.






Elbows Tees


(5)


FLANGES

Socket Type


Class 150 FF (8)


Class 150 FF

GASKETS 3.2 mm 50-60 Shore A durometer elastomeric Full face elastomeric,




SOLVENT CEMENT ASTM F493 CPVC to PVC or CPVC

GATE VALVES 4" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BB, ASTM B61/B62 bronze trim (less than 16% zinc)

(6)

CHECK VALVES 4" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BC, ASTM B61/B62 bronze trim (less than 16% zinc)

(6)

GLOBE VALVES 4" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BB, ASTM B61/B62 bronze trim (less than 16% zinc)

(6)

BUTTERFLY VALVES 4" and larger 200 psig min.

Wafer or Lug or

FF Flanged

Ductile iron ASTM A395 rubber lined body, stem packing integral with liner, protected SS stem, AL-BR disc (less than 16% zinc), Monel pins

Ball Valves And

Ball Check Valves ½" and above 150 psi

Threaded Socketweld Flanged FF

CPVC ASTM D1784 CL. 23447-B body and ball, EPDM seats, double union, fire safe

(6)(7)






of 403

10.33.7 Line Class: 501PD0P

Line Class: 501PD0P Basic Material: HDPE Max. Temperature: 80°C Stress Relief: Not Applicable Service: Utility Chem. Prod. Code: ASME B31.3 Min. Temperature: 4.0°C Butt-weld: Manufact. Stand. Rating Class: 150 B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.



PIPE 4” to 16” Class 150 FM HDPE D3350/D3035-DR11/F714-DR11 PE3408

(5) FITTINGS Class 150 FM HDPE D3350/D3261-DR11 PE3408

(8)

FLANGES And flange adaptor 4” to 16” Class 150 FM D3350/D3261-DR11 PE3408

GASKETS 3.2 mm elastomeric Full face, neoprene, 55-65 Shore A durometer






of 403

10.33.8 Line Class: 301PV0W

Line Class: 301PV0W Basic Material: PVC/UPVC Max. Temperature: 50°C Stress Relief: Not Applicable Service: Undergr., Sanitary Code: ASME B31.3 Min. Temperature: 4.0°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.

Temperature (°C) (2) 4 23 38 50 Pressure Rating (bar) (2) 16 16 9.9 6.4


20 - 200 mm Class 5 PVC/uPVC PVC/uPVC, SAS 14/15 Class 5 Local Made Article

PIPE ½" - 6" Sch. 80 PVC/uPVC ASTM D1785

PVC 1120 OR 1220 FITTINGS FOR SOLVENT

WELD JOINTS (5) Bushings 20 - 200 mm Class 5 PVC/uPVC uPVC, SAS 14/15 Class 5 Couplings

Elbows Tees

Unions

½" - 6" Sch. 80 PVC/uPVC or CPVC

(0 to 50°C), ASTM F439 Sch. 80 CPVC 4120

(0 to 50°C)

Pipe Union ½" - 3" Sch. 80 CPVC ASTM F439 CPVC female socket by male IPS adaptor

DIN X ASTM ½ in x 20 mm Class 5 PVC/uPVC PVC/uPVC, SAS 14/15 ADAPTORS 3 in x 90 mm Sch. 80 or CPVC Class 5, Local Made Article FLANGES (8)

Socket Type ¾" - 8" Class 150 Sch. 80 Flat Face ASTM F439 CPVC Schedule 80 Class

150 FF

Threaded Type ½" - 2" Class 150 Sch. 80 Flat Face ASTM F437 CPVC Schedule 80 Class

150 FF

GASKETS 3.2 mm 50-60 Shore A durometer elastomeric Full face, elastomeric,



SOLVENT CEMENT ASTM D2564 PVC to PVC ASTM F-493 CPVC to PVC or CPVC


(6) GATE VALVES

3" and above Class 150 FF Flanged Bronze ASTM B61/B62 or AL-BR body, trim B61/B62 or Monel or AL-BR, BB

(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES

3" and above Class 150 FF Flanged Bronze ASTM B61/B62 or AL-BR body, trim B61/B62 or Monel or AL-BR, BC

(6)


wafer or lug or FF

Flanged


Ball Valves And

Ball Check Valves ½" and above 150 psi

Threaded Socketweld Flanged FF

PVC ASTM D1784 CL. 12454-B or CPVC ASTM D1784 CL. 23447-B body and ball, EPDM seats, double union, fire safe

(6)(7)






of 403

10.34 Internally Lined Carbon Steel Line Classes



The following Notes shall apply to all of this lined carbon steel class family and shall be considered as an integral part of the individual line class.

Notes: (To be confirmed for final revision)

(1) Material selection:

Cement-lined steel pipe and fittings may be used for any non-acidic water and oily water service in 4-inch NPS or larger, below ground, above ground and in buildings. It is mainly intended for applications where plastic pipe is not permitted.

Fusion Bonded Epoxy-lined carbon steel piping may be used as alternate materials to cement-lined piping.



(4) Seal Welding






(7) Valve Trim


(8) Flanges








of 403

10.34.2 Line Class: 301LC0W

Line Class: 301LC0W Basic Material: Cem. Lin. C.S. Max. Temperature: 343°C Stress Relief: Not Applicable Service: Waste Water Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.



Notes

PIPE 4" and larger Calculate

Seamless or welded

ASTM A53 or API 5L,

Cement-lined per 01-JERMS-H-9005

FITTINGS

Elbows Tees Caps

Reducers

4" and larger Calculate to match pipe ASME B16.9 (5)

Sleeve Couplings 4" and larger Manufact. Standard FLANGES

Weld Neck

Slip-on Blinds

4" and larger Class 150 FF Bore to match pipe (8)

GASKETS 4" and larger 1.6 mm, Synthetic fiber

BOLTING Machine bolts ASTM A307 Gr. A or B


(6)


(6)


(6)


Wafer or Lug or

FF Flanged







of 403

10.34.3 Line Class: 301LE0W

Line Class: 301LE0W Basic Material: Epoxy Lin. C.S. Max. Temperature: 93°C Stress Relief: Not Applicable Service: Waste Water Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.


Item

Size

Rating Schedule

Type

Specification

Notes

PIPE 2" and larger Calculate Seamless or welded

ASTM A53 or API 5L Fusion Bonded Epoxy lined per

JERMS-H-9091

FITTINGS

Elbows Tees Caps

Reducers

2" and larger Calculate to match pipe ASME B16.9 (5)

FLANGES

Weld Neck Slip-on Blinds

2" and larger Class 150 FF ASME B16.5 (8)

GASKETS 2" and larger 1.6 mm, Synthetic fiber

BOLTING Machine bolts ASTM A307 Gr. B or ASME A193 B7 stud bolts semi-finished, heavy pattern A194 Gr. 2H hex nuts


(6)


(6)


(6)


Wafer or Lug or

FF Flanged







of 403

10.34.4 Line Class: 301LT0P

Line Class: 301LT0P Basic Material: Teflon Lin. C.S. Max. Temperature: 93°C Stress Relief: Not Applicable Service: Spent Caustic Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.

Temperature (°C) (2) Pressure Rating (bar) (2) Manufacturer design

Item

Size Rating

Schedule

Type

Specification

Notes

PIPE

1" and larger

40

Seamless or welded

ASTM A106 Gr. B/F423 Flanged

ends B16.5

FITTINGS

Elbows Tees Caps

Reducers

1" and larger 40 ASTM A234 WCB/F423 Flanged ends B16.5 (5)

FLANGES Lap Joint + Stub End Class 150 FF A105N ASME B16.5 (8)

GASKETS TFE Elastomeric Filler, 3mm BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts.

CHECK VALVES 1" and larger Class 150 FF Flanged ASTM A216 WCB PTFE lined body, BC, Horiz. Inst. PTFE ball (6)

DIAPHRAGM VALVES 1" and larger Class 150 FF Flanged

ASTM A395 PTFE lined body, PTFE Diaphragm, B16.42 Flanged

PLUG VALVES 1" and larger Class 150. FF Flanged ASTM A216 WCB PTFE Lined, PTFE Sleeve, API 599 (6)






of 403

10.34.5 Line Class: 101LT0A

Line Class: 101LT0A Basic Material: Teflon Lin. C.S. Max. Temperature: 160°C Stress Relief: Not Applicable Service: Sulfuric acid Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.


Item

Size Rating

Schedule

Type

Specification

Notes

PIPE 1" and larger 40

Seamless or welded

ASTM A106 Gr. B/F423 Flanged ends B16.5

FITTINGS

Elbows Tees Caps

Reducers

1" and larger 40 ASTM A234 WCB/F423 Flanged ends B16.5 (5)

FLANGES Lap Joint + Stub End 1" and larger Class 150 RF Ductile Iron, Vanstone type

Or Screwed Flange 1" and larger Class 150 RF A536 Gr. 70-50-05 molded end

AWWA C110

(8)

GASKETS 1" and larger 3.2 mm, Gylon 3540 ring type BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts.

CHECK VALVES 1" and larger Class 150 RF Flanged ASTM A216 WCB PTFE lined body, BC, Ver. Up flow only inst., PTFE ball

(6)

BUTTERFLY VALVES 3" and larger Class 150 Wafer

Ductile Iron PTFE lined body, PFA encapsulated disc, neoprene stem seal,

PLUG VALVES 1" and larger Class 150. RF Flanged DI PTFE body liner, PTFE Sleeve, API 599 (6)






of 403

10.34.6 Line Class: 101LP0A

Line Class: 101LP0A Basic Material: Polypropylene Lined Carbon Steel Max. Temperature: 200°C Stress Relief: Not Applicable

Service: Sulfuric acid Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.


Item

Size Rating

Schedule

Type

Specification

Notes

PIPE 1" and larger 40 Seamless or welded

ASTM A106 Gr. B/PP lined F1545, Flanged ends B16.5

FITTINGS

Elbows Tees Caps

Reducers

1" and larger Class 150 RF A216 WCB PP-Lined F1545, AWWA C110 – 150 RF B16.5 (5)

FLANGES

Slip-on Blinds

1" and larger Class 150 RF A105 PP-Lined F1545, ASME B16.5 (8)


CHECK VALVES 1" and larger Class 150 RF Flanged ASTM A351-CN7M body, BC, Ver. Up flow only inst., Trim No.13

(6)

PLUG VALVES 1" and larger Class 150. RF Flanged ASTM A351-CN7M, Alloy 20 Plug, PP Sleeve, API 599

(6)






of 403

10.34.7 Line Class: 101LP0P

Line Class: 101LP0P Basic Material: Polypropylene Lined Carbon Steel Max. Temperature: 107°C Stress Relief: Not Applicable

Service: Neutralized Water Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 RF B16.5-B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.

Temperature (°C) (2) -29 107 Pressure Rating (bar) (2) Manufacturer design

Item

Size

Rating Schedule

Type

Specification

Notes

PIPE 1" and larger S-40 minimum Seamless or welded

ASTM A53 or API 5L PP lined F1545 – 150 RF FLG

FITTINGS

Elbows Tees Caps

Reducers

1" and larger Class 150 RF A216 WCB PP-Lined F1545, AWWA C110 – 150 RF B16.5 (5)

FLANGES

Slip-on Blinds

1" and larger Class 150 RF A105 PP-Lined F1545, ASME B16.5 (8)


CHECK VALVES 1" and above Class 150 wafer or lug

or RF Flanged

A395/A105N, Dual plate PFA Coated, EPDM Lined body,Seating BUNA-N, Al-BR Disc,Spring Inconel

(6)

PLUG VALVES 1" and above Class 150 RF Flanged DI A395 PTFE/EPDM Lined, BC, PFA coated ductile iron plug, diaphragm PTFE

(6)

BALL VALVES 1" and above Class 150 RF Flanged DI A395 PTFE/EPDM Lined, PTFE coated ball, floating typ, PTFE seats, fire safe

(6)(7)

DIAPHRAGM VALVE 1” and above Class 150 RF

Flanged DI A395, internally rubber coated, EPDM sealing






of 403

10.35 Carbon Steel for Benzene (≥ 95% WT) Service Line Classes.



Notes:





(4) Valve leakage


• Tightness class: “A” according to ISO-15848, part I, table 1. Test fluid shall be helium (class AH)







(7) Valve Trim


(8) Flanges


(9) Minimum line size shall be of 1”.for line classes of 4.5 and 6.0 mm of corrosion allowance


(11) Gate and Globe valves shall have metallic bellow seals welded on both sides





of 403

10.35.2 Line Class: 101CS1XB

Line Class: 101CS1X Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Benzene (≥95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code



¾" Sch 160 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20


(1) (2) PIPE





API 5L Gr. B





SM

A105N, B16.5 (8)


1½" and under Class 800 Socketweld A105N body, BB, OS&Y, BST, API 602, Trim No.8 (11)


SM A216-WCB body, BB, OS&Y, BST, API 600, Trim No. 8 (6)

1½” and under Class 800 Socketweld A105N body, BB, OS&Y, BST, Trim No. 8

(6) GLOBE VALVES


A216-WCB body, BB, OS&Y, BST, Trim No. 8






(6)(7)



(6)(7) BALL VALVES



(6)(7)








of 403





¾" S-XXS 1” to 2” S-160 3" to 4” S-80

6" to 10” S-40 12" to 18” S-20


(1) (2) PIPE





API 5L Gr. B





SM

A105N, B16.5 (8)


1½" and under Class 800 Socketweld A105N body, BB, OS&Y, BST, API 602, Trim No.8

(6) GATE VALVES


A216-WCB body, BB, OS&Y, BST, API 600, Trim No. 8

(6)

1½” and under Class 800 Socketweld A105N body, BB, OS&Y, BST, Trim No. 8

(6) GLOBE VALVES








(6)(7)



(6)(7) BALL VALVES



(6)(7)








of 403








(1) (2) (3)





API 5L Gr. B





SM

A105N, B16.5 (8)



(6) GATE VALVES



(6)

1½" and under Class 800 Socketweld A105N body, BB, OS&Y, BST, Trim No. 8

(6) GLOBE VALVES








(6)(7)



(6)(7) BALL VALVES



(6)(7)








of 403





¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40



(1) (2) (3)





API 5L Gr. B





SM

A105N, B16.5 (8)



(6) GATE VALVES



(6)

1½" and under Class 800 Socketweld A105N body, BB, OS&Y, BST, Trim No. 8

(6) GLOBE VALVES







A105N body, floating ball, RTFE seats, Graphite Packing., Trim No. 10, fire safe

(6)(7)



(6)(7) BALL VALVES



(6)(7)








of 403

10.36 Category M (Lethal) Line Classes


The following Notes shall apply to all of the carbon steel classes family (101CH1S) and shall be considered as an integral part of the individual line class.

Notes:









(6) Valve Trim


(7) Flanges



(9) Minimum line size shall be of 1” for line class with 4.5 and 6.0 mm of corrosion allowance

(10) For this Category M (lethal) service, the following requirements shall be applied to the prescriptions of the line classes here below provided:

a. All block valves shall satisfy the following:

− Tightness class: “A” according to ISO-15848, part I, table 1. Test fluid shall be helium (class AH)

− Endurance class: CO2 (1500 cycles)

− Temperature class: 400°C according to ISO-15848, part I, table 3.

b. Minimize the number of flanges. The surface roughness shall be < 3.2 μm

c. Shop and field welds shall be 100% radiographied. Threaded connections shall be avoided.





of 403

10.36.2 Line Class: 101CH4SM Line Class: 101CH4SM Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray



Up to 2” S-XXS 3” S-160 4” S-120 6” S-80

8” to 10” S-60 12” to 16” S-40

18” S-30


PIPE






BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10.b)


(5) GATE VALVES


(5)


(5) GLOBE VALVES


(5) 1½” and under Class 150 RF Flanged A105N body, BC, Trim No. 10 (5) CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (5) 1½” and under Class 150 RF Flanged A105N body, floating ball, RTFE

seats, Trim No. 10, fire safe (5)(6)


(5)(6) BALL VALVES


(5)(6)


(5) PLUG VALVES


(5)








of 403

10.36.3 Line Class: 103CH4SM

Line Class: 103CH4SM Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray


Item

Size

Rating Schedule

Type

Specification

Notes

Up to 2” S-XXS 3” S-160 4” S-120

6” to 8” S-80 10” to 18” S-60







BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10.b)


(5) GATE VALVES


(5)


(5) GLOBE VALVES




(5)(6)


(5)(6) BALL VALVES


(5)(6)


(5) PLUG VALVES


(5)


fire-safe, API 609 Cat. B, Trim 316






of 403

10.36.4 Line Class: 101ST0SM

Line Class: 101ST0SM Basic Material: Sour SS 316 Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay


Item

Size Rating

Schedule

Type

Specification


4” to 6” S-10S

Seamless

A312 Gr. TP316L (1)

(2) PIPE


1½" and under



FITTINGS




Sockolets 1½" and under Class acc. to MSS SP97

Socketweld/ Threaded A182 Gr. F316L, MSS-SP97 (4)



2" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10.b)



(5)

GATE VALVES



(5)



(5) GLOBE VALVES


(5)



(5) CHECK VALVES


(5)






of 403

10.37 Impact Tested Carbon Steel Hydrogen Services Line Classes


The following Notes shall apply to all of the imct tested carbon steel classes family (101CA1H) and shall be considered as an integral part of the individual line class.

Notes:





(4) Seal Welding







(7) Valve Trim


(8) Flanges



(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm of corrosion allowance.





of 403

10.37.2 Line Class: 103CA1H

Line Class: 103CA1H Basic Material: Low Temperature C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code

Service: Hydrogen Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray



Notes 1" to 2" Sch 80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS


(1) (2) PIPE

20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2 (3) FITTINGS

El's Tees,



Weldolets All Buttweld A350 Gr. LF2 CL. 1, B16.11

FLANGES 1" and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1, B16.11 (8)

BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts.

GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.

1½" and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12

(6) GATE VALVES

2" and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, graphite packing, Trim No. 12

(6)

1½" and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12

(6) GLOBE VALVES

2" and above Class 300 RF Flanged A352-LCB body, BC, Trim No. 10

(6)

1½" and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BC, Trim No. 10

(6) CHECK VALVES


Notes: Notes (1) through (9) of 10.37.1 shall apply





of 403


Line Class: 103CA2H Basic Material: Low Temperature C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code




Notes 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40


(1) (2) PIPE


El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES







of 403


Line Class: 106CA1H Basic Material: H2 Serv. Low temperature C.S. Max. Temperature: 232°C Stress Relief: Per Code




Notes 1" to 2" S-80

3" S-40 4” to 18” S-80


(1) (2) PIPE


El's Tees,








(6) GATE VALVES


(6)


(6) GLOBE VALVES


(6)


(6) CHECK VALVES







of 403

Appendix A: Line Class Designator Field Definition Tables

A.1 Flange Face and Pressure Rating

Table A-1: Flange Face and Pressure Rating

Symbol Flange face Type

1 Raised Face 2 Ring Joint Face 3 Flat Face 4 Compact flanges 5 Specialty flange facing

Symbol Nominal Pressure Rating Or Class

(ASME B16.5/B16.47 Flange Class)

01 150 03 300 04 400 06 600 09 900 15 1500 25 2500 (ASME B16.1 Cast Iron Flange Class)

12 125 13 250 (Specific Rating Designations)

80 Non-pressure 85 Pressure Class 75/150 RF 90 Class 3000, API 6A 95 Class 10000, API 6A





of 403

A.2 Line Material (aa)

Table A-2: Basic Pipe Material Designator

Symbol Material

CA Impact Tested Carbon Steel CS Carbon Steel CG Galvanized Carbon Steel CH HIC Resistant Carbon Steel CJ 1-1/4 Cr-1/2 Mo Alloy Steel CK 2-1/4 Cr-1 Mo Alloy Steel CL 5 Cr-1/2 Mo Alloy Steel CM 9 Cr-1 Mo Alloy Steel BC Copper Tubing BD 90-10 Cu-Ni FE Glass Fiber Reinforced Epoxy LC Cement-lined Carbon Steel LE Epoxy-lined Carbon Steel LP Polypropylene-lined Carbon Steel LR Refractory-lined Carbon Steel LT PTFE-Lined Carbon Steel NC Alloy C276 NM Monel 400 NR Incoloy 800 NS Alloy 825 NT Carpenter 20 (Alloy 20) NY Hastelloy C PD HDPE (High Density Polyethylene) PU CPVC(Chlorinated PVC) PV PVC(PolyVinyl Chloride) SA 304/304L Stain SC Type 304/304L Stainless Steel SD Type 316/316L Stainless Steel SJ 321 Stainless Steel SM 347H Stainless Steel SP 2205 Duplex Stainless Steel SR 304 Stainless Steel SS 304L Stainless Steel ST 316 Stainless Steel SU 316L Stainless Steel SW 310S Stainless Steel





of 403

A.3 Corrosion Allowance (x)

Table A-3: Corrosion Allowance Designator

Symbol Corrosion Allowance

0 Zero corrosion allowance

1 1.5 mm

2 3.0 mm

3 4.5 mm

4 6.0 mm

9 Corrosion allowance as noted for specific cases

A.4 Service Group Family

Table A-4: Service Group Designator

Symbol Service

A Acid B Boiler External Piping and Joint C Caustic D Amine Service E Catalyst and Slurry F Flare H Hydrogen J External Jacketing Fluid N Ammonium Bisulfide P Process (General Hydrocarbon and other fluids) Q Chlorination Gas (Owner designator)

S Wet H2S Sour Service SM Sour, Sour+H2, Sour + Amine (Lethal) Service T Process high temperature services V Highly Viscous W Water X Toxic, Benzene

XB Benzene (≥ 95% wt)

Y Chlorine Gas (Owner designator)





of 403

Appendix B: Fliud Idenification Code

Refer to JERES-C-102 for the fliud identification listing.





of 403

Appendix C: Piping Line Class Summary Table

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

101CA1P

150 RF



1.5 SS 316 -45

340

18.4 Process

101CA2P

150 RF



3.0 SS 316 -45

340

18.4 Process

103CA1P

300 RF



1.5 SS 316 -45

340

48.0 Process

103CA2P

300 RF



3.0 SS 316 -45

340

48.0 Process

106CA1P

600 RF



3.0 SS 316 -45

340

102.1 Process

101CS1P

150 RF



425

19.6 Process

101CS2P

150 RF



425

19.6 Process

101CS4P

150 RF



425

19.6 Process

103CS1P

300 RF



425

51.1 Process

103CS2P

300 RF



425

51.1 Process

103CS4P

300 RF



425

51.1 Process

106CS1P

600 RF



425

102.1 Process





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

106CS2P

600 RF



425

102.1 Process

106CS4P

600 RF



425

102.1 Process

209CS1P

900 RTJ

Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H


425

153.2 Process

209CS2P

900 RTJ



425

153.2 Process

215CS1P

1500 RTJ



425

255.3 Process

215CS4P

1500 RTJ



425

255.3 Process

225CS1P

2500 RTJ



425

425.5 Process

225CS4P

2500 RTJ



425

425.5 Process

101CS1P1

150 RF


Carbon Steel 1.5 SS 316 -29

425

19.6 Process

101CS2P1

150 RF



425

19.6 Process

101CS3P1

150 RF



425

19.6 Process

103CS2P1

300 RF



425

51.1 Process

103CS3P1

300 RF



425

51.1 Process





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

215CS2P1

1500 RTJ



425

255.3 Process

101CH1S

150 RF

Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM

HIC Resistant Carbon Steel + JERES-A-301

1.5 SS 316 -29

260

19.6

Sour, Sour +

Hydrogen, Sour + Amine

101CH2S

150 RF



3.0 SS 316 -29

260

19.6

Sour, Sour +


101CH3S

150 RF

Spiral W. SS316 Graph. A193 B7M/A194 Gr. 2HM


4.5 SS 316 -29

260

19.6

Sour, Sour +


101CH4S

150 RF



6.0 SS 316 -29

260

19.6

Sour, Sour +


103CH1S

300 RF



1.5 SS 316 -29

260

51.1

Sour, Sour +


103CH2S

300 RF



3.0 SS 316 -29

260

51.1

Sour, Sour +


103CH3S

300 RF



4.5 SS 316 -29

260

51.1

Sour, Sour +


103CH4S

300 RF



6.0 SS 316 -29

260

51.1

Sour, Sour +


106CH1S

600 RF



1.5 SS 316 -29

260

102.1

Sour, Sour +


106CH2S

600 RF



3.0 SS 316 -29

260

102.1

Sour, Sour +


106CH4S

600 RF



6.0 SS 316 -29

260

102.1

Sour, Sour +


203CH2S

300 RTJ

Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM


3.0 SS 316 -29

260

51.1

Sour, Sour +






of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

206CH3S

600 RTJ



4.5 SS 316 -29

260

102.1

Sour, Sour +


209CH1S

900 RTJ



1.5 SS 316 -29

260

153.2

Sour, Sour +


209CH2S

900 RTJ



3.0 SS 316 -29

260

153.2

Sour, Sour +


209CH3S

900 RTJ



4.5 SS 316 -29

260

153.2

Sour, Sour +


215CH1S

1500 RTJ



1.5 SS 316 -29

260

255.3

Sour, Sour +


215CH2S

1500 RTJ



3.0 SS 316 -29

260

255.3

Sour, Sour +


215CH4S

1500 RTJ



6.0 SS 316 -29

260

255.3

Sour, Sour +


225CH1S

2500 RTJ



1.5 SS 316 -29

260

425.5

Sour, Sour +


101CA2S

150 RF


HIC Resistant Low

Temperature Carbon Steel

3.0 SS 316 -45

260

18.4 Sour, Sour Flare

101CA4S

150 RF


HIC Resistant Low


6.0 SS 316 -45

260


103CA2S

300 RF


HIC Resistant Low


3.0 SS 316 -45

260

48.0

Sour, Sour +


103CA4S

300 RF


HIC Resistant Low


6.0 SS 316 -45

260


101CS1D

150 RF



120

19.6 Amine





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

101CS2D

150 RF



120

19.6 Amine

101CS4D

150 RF



120

19.6 Amine

103CS1D

300 RF



120

51.1 Amine

103CS2D

300 RF



120

51.1 Amine

106CS2D

600 RF



120

102.1 Amine

209CS2D

900 RTJ



120

153.2 Amine

215CS1D

1500 RTJ



120

255.3 Amine

215CS2D

1500 RTJ



120

255.3 Amine

101CH1F

150 RF



1.5 SS 316 -29

260

19.6 Sour Flare, Sour + H2 Flare, Sour

+ Amine Flare

101CH2F

150 RF



3.0 SS 316 -29

260


+ Amine Flare

101CH4F

150 RF



6.0 SS 316 -29

260


+ Amine Flare

103CH2F

300 RF



3.0 SS 316 -29

260


+ Amine Flare

101CA1F

150 RF


HIC Resistant Low


1.5 SS 316 -45

260


+ Amine Flare





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

101CA2F

150 RF


HIC Resistant Low


3 SS 316 -45

260


+ Amine Flare

103CA2F

300 RF


HIC Resistant Low


3 SS 316 -45

232


+ Amine Flare

101CS1B

150 RF

Spiral W. SS316 Graphite SA193 B7 / SA194 Gr. 2H


425

19.6 ASME B31.1

101CS2B

150 RF



425

19.6 ASME B31.1

103CS2B

300 RF



425

51.1 ASME B31.1

101CJ1B

150 RF

Spiral W. SS316 Graphite SA193 B16 / SA194 Gr. 4


538

19.8 ASME B31.1

401CS1E

150 CF

SS Metallic Seal Ring A193 B7 / A194 Gr. 2H


425

19.6 Catalyst and Slurry

401CS2E

150 CF



425


403CS1E

300 CF



425


403CS2E

300 CF



425


406CS2E

600 CF



425


403CJ2E

300 CF


1.25 Cr – 0.5 Mo 3.0 SS 316

-29

425 51.7 Catalyst and

Slurry

401CL2E

150 CF


5 Cr – 0.5 Mo 3.0 SS 316 -29

538






of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

403CL2E

300 CF


5 Cr – 0.5 Mo 3.0 SS 316 -29

590


406CL2E

600 CF


5 Cr – 0.5 Mo 3.0 SS 316 -29

590


403SC0E

300 CF


304H 0.0 SS 304H -29

538


403SC1E

300 CF


304H 1.5 SS 304H -29

538


101CS1C

150 RF


Carbon Steel 1.5 Monel -29

76

19.6 Caustic

101CS2C

150 RF



76

19.6 Caustic

103CS1C

300 RF



76

51.1 Caustic

103CS2C

300 RF



76

51.1 Caustic

101CA2C

150 RF



3.0 Monel -45

76

18.4 Caustic

103CA2C

300 RF



3.0 Monel -45

76

48.0 Caustic

101CS2A

150 RF

Flat Gasket PTFE A193 B7 / A194 Gr. 2H

Carbon Steel 3.0 Alloy 20 -29

200

15.9 Sulfuric Acid

101CS3A

150 RF



200

15.9 Sulfuric Acid

103CS2A

300 RF



200

41.4 Sulfuric Acid





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

103CS3A

300 RF



200

41.4 Sulfuric Acid

101CS1H

150 RF

Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H


232

19.6 Hydrogen

101CS2H

150 RF



232

19.6 Hydrogen

103CS1H

300 RF



232

51.1 Hydrogen

103CS2H

300 RF



232

51.1 Hydrogen

103CS4H

300 RF



232

51.1 Hydrogen

106CS1H

600 RF



232

102.1 Hydrogen

106CS2H

600 RF



232

102.1 Hydrogen

206CS1H

600 RTJ


Carbon Steel 1.5 13 Cr 232

425

102.1 Hydrogen

209CS1H

900 RTJ



425

153.2 Hydrogen

209CS2H

900 RTJ



425

153.2 Hydrogen

215CS1H

1500 RTJ



425

255.3 Hydrogen

103CS3H1

300 RF



232

51.1 Hydrogen





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

203CS2H1

300 RTJ


Carbon Steel 3.0 SS 316 232

425

51.1 Hydrogen + H2S (not wet)

206CS3H1

600 RTJ


Carbon Steel 4.5 SS 316 232

425


209CS3H1

900 RTJ



425


215CS1H1

1500 RTJ



425


215CS2H1

1500 RTJ



425


101CS1J

150 RF



425

19.6 External Jacketing

301CG0W

150 FF

Synthetic Fibre A307 B & A193 B7 /

A194 Gr. 2H

Carbon Steel &

Galvanized Carbon Steel

0.0 13 Cr -29

100

10.3 Potable Water

301CG1P

150 FF


A194 Gr. 2H

Carbon Steel &


1.5 13 Cr -29

100

10.3 Service Air

301CG2P

150 FF


A194 Gr. 2H

Carbon Steel &


3.0 13 Cr -29

100

10.3 Service Air

101CS1X

150 RF



425

19.6 Toxic, Benzene (<95%)

101CS2X

150 RF



425


103CS1X

300 RF



425

51.1 Toxic, Benzene (95%)

103CS2X

300 RF



425






of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

101CS4V

150 RF



425

19.6 Viscous Process Fluid

103CS4V

300 RF



425

51.1 Viscous Process Fluid

103CH2N

300 RF



3.0 SS 316 -29

260

51.1 Ammonium Bisulphide

103CH3N

300 RF



4.5 SS 316 -29

260


106CH3N

600 RF



4.5 SS 316 -29

260


203CH3N

300 RTJ



4.5 SS 316 -29

260


215CH3N

1500 RTJ



4.5 SS 316 -29

260


101CJ1P

150 RF

Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4

Low Alloy 1.25 Cr – 0.5

Mo 1.5 13 Cr

-29

538 19.8 Process

103CJ2P

300 RF



Mo 3.0 13 Cr

-29

590 51.7 Process

106CJ1P

600 RF



Mo 1.5 13 Cr

-29

590 103.4 Process

106CJ1P1

600 RF



Mo 1.5 SS 316

-29

590 103.4 Corrosive

Process

106CJ2P

600 RF



Mo 3.0 13 Cr

-29

590 103.4 Process

106CJ4P

600 RF



Mo 6.0 13 Cr

-29

590 103.4 Process





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

209CJ4P

900 RTJ

5 Cr Octag. Ring A193 B16 / A194 Gr. 4


Mo 6.0 13 Cr

-29

590 155.1 Process

103CK1P

300 RF


Low Alloy 2.25 Cr – 1 Mo 1.5 13 Cr

-29

590 51.7 Process

101CL2P

150 RF


Low Alloy 5 Cr – 0.5 Mo 3.0 13 Cr

-29

538 20.0 Process

101CL4P

150 RF



-29

538 20.0 Process

103CL1P

300 RF



-29

590 51.7 Process

103CL2P

300 RF



-29

590 51.7 Process

103CL4P

300 RF



-29

590 51.7 Process

225CL2P

2500 RTJ



-29

590 430.9 Process

225CL2P1

2500 RTJ


Low Alloy 5 Cr – 0.5 Mo 3.0 SS 316

-29

590 430.9 Corrosive

Process

101CM2P

150 RF


Low Alloy 9 Cr – 1 Mo 3.0 13 Cr

-29

538 20.0 Process

101CM3P

150 RF



-29

538 20.0 Process

101CM4P

150 RF



-29

538 20.0 Process

103CM2P

300 RF



-29

590 51.7 Process





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

103CM3P

300 RF



-29

590 51.7 Process

103CM4P

300 RF



-29

590 51.7 Process

106CM2P

600 RF



-29

590 103.4 Process

106CM3P

600 RF



-29

590 103.4 Process

201CJ1P

150 RTJ



Mo 1.5 13 Cr

-29

538 19.8 Process

203CJ1P

300 RTJ



Mo 1.5 13 Cr

-29

590 51.7 Process

206CJ1P

600 RTJ



Mo 1.5 13 Cr

-29

590 103.4 Process

101CJ1H

150 RF

Metal Grooved Flex. Graph A193 B16 / A194 Gr. 4


Mo 1.5 13 Cr

-29

538 19.8 Hydrogen

103CJ1H

300 RF



Mo 1.5 13 Cr

-29

590 51.7 Hydrogen

103CJ1H1

300 RF



Mo 1.5 SS 316

-29

590 51.7 Hydrogen +

H2S (not wet)

103CJ2H

300 RF



Mo 3.0 13 Cr

-29

590 51.7 Hydrogen

106CJ1H

600 RF



Mo 1.5 13 Cr

-29

590 103.4 Hydrogen

106CJ2H

600 RF



Mo 3.0 13 Cr

-29

590 103.4 Hydrogen





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

106CJ4H

600 RF



Mo 6.0 13 Cr

-29

590 103.4 Hydrogen

209CJ1H

900 RTJ



Mo 1.5 13 Cr

-29

590 155.1 Hydrogen

215CJ1H

1500 RTJ



Mo 1.5 13 Cr

-29

590 258.6 Hydrogen

215CJ1H1

1500 RTJ



Mo 1.5 SS 316

-29

590 258.6 Hydrogen +

H2S (not wet)

225CJ1H1

2500 RTJ



Mo 1.5 SS 316

-29


H2S (not wet)

103CK1H

300 RF



-29

590 51.7 Hydrogen

225CL2H1

2500 RTJ


Low Alloy 5 Cr – 0.5 Mo 3.0 SS 316

-29


H2S (not wet)

203CJ1H

300 RTJ



Mo 1.5 13 Cr

-29

590 51.7 Hydrogen

206CJ1H

600 RTJ



Mo 1.5 13 Cr

-29

590 103.4 Hydrogen

103CJ1S

300 RF


Low Alloy 1.25 Cr – 0.5 Mo + JERES-

A-301

1.5 SS 316 -29

590

51.7 Sour, Sour + Hydrogen

106CJ1S

600 RF



A-301

1.5 SS 316 -29

590


106CJ2S

600 RF



A-301

3.0 SS 316 -29

590


106CJ4S

600 RF



A-301

6.0 SS 316 -29

590






of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

209CJ1S

900 RTJ



A-301

1.5 SS 316 -29

590


209CJ2S

900 RTJ



A-301

3.0 SS 316 -29

590


209CJ4S

900 RTJ



A-301

6.0 SS 316 -29

590


215CJ1S

1500 RTJ



A-301

1.5 SS 316 -29

590


225CJ1S

2500 RTJ



A-301

1.5 SS 316 -29

590


225CL2S

2500 RTJ


Low Alloy 5 Cr – 0.5 Mo + JERES-A-

301

3.0 SS 316 -29

590


103CK1X

300 RF



-29

590 51.7 Toxic,

Benzene (<95%)

103CK1X

300 RF



-29

590 51.7 Toxic,

Benzene

101LR1T

150 RF

Spiral W. SS304H Graphite A193 B7 / A194 Gr. 2H

Refract. Lined Carbon Steel 1.5 304H

-29

770 19.6 High

Temperature

103LR1T

300 RF

Spiral W. SS304H Graphite A193 B7 / A194 Gr. 2H

Refract. Lined Carbon Steel 1.5 304H

-29.0

770 51.1 High

Temperature

101SA0P

150 RF


Stainless Steel Type 304/304L 0.0 SS 316

-40

538 19.0 Process

101SA1P

150 RF



-40

538 19.0 Process

103SA0P

300 RF



-40

538 49.6 Process





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

103SA1P

300 RF



-40

538 49.6 Process

106SA1P

600 RF



-40

538 99.3 Process

209SA1P

900 RTJ

SS 316 Octag. Ring A193 B7 / A194 Gr. 2H


-40

538 148.9 Process

225SA1P

2500 RTJ



-40

538 413.7 Process

101SC0P

150 RF


Stainless Steel Type 304H 0.0 SS 316

-40

538 19.0 Process

101SC1P

150 RF



-40

538 19.0 Process

103SC0P

300 RF



-40

538 49.6 Process

103SC1P

300 RF



-40

538 49.6 Process

106SC1P

600 RF



-40

538 99.3 Process

101SD0P

150 RF



-40

538 19.0 Process

101SD1P

150 RF



-40

538 19.0 Process

103SD0P

300 RF



-40

538 49.6 Process

103SD1P

300 RF



-40

538 49.6 Process





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

106SD0P

600 RF



-40

538 99.3 Process

101SR0P

150 RF


Stainless Steel Type 304 0.0 SS 316

-40

538 19.0

Process , LP Nitrogen, Service Air, Demi Water,

Instrument air

101SR1P

150 RF



-40

538 19.0 Process

103SR0P

300 RF



-40

538 49.6 Process

101SS1P

150 RF


Stainless Steel Type 304L 1.5 SS 316

-40

425 15.9 Process

103SS0P

300 RF



-40

425 41.4 Process

103SS1P

300 RF



-40

425 41.4 Process

106SS1P

600 RF



-40

425 82.7 Process

101SU0P

150 RF



-40

450 15.9 Process

101SU1P

150 RF



-40

450 15.9 Process

103SU0P

300 RF



-40

450 41.4 Process

103SJ1P

300 RF

Spiral W. SS321 Graphite A453 Gr. 660 CL. A

Stainless Steel Type 321 1.5 SS 321 /

SS 347

-29

538 49.6 Process

103SJ2P

300 RF



SS 347

-29

538 49.6 Process





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

106SJ1P

600 RF



SS 347

-29

538 99.3 Process

206SJ1P

600 RTJ

SS 321 Octag. Ring A453 Gr. 660 CL. A


SS 347

-29

538 99.3 Process

209SJ1P

900 RTJ



SS 347

-29

538 148.9 Process

215SJ1P

1500 RTJ



SS 347

-29

538 248.2 Process

103SP1P

300 RF

Spiral W. S32205 Graph. A193 B7 / A194 Gr. 2H

Duplex SS UNS S32205 1.5 UNS

S32205

-40

316 51.7 Process

215SP1P

1500 RTJ

UNS S32205 Octag. Ring A193 B7 / A194 Gr. 2H


S32205

-40

316 258.6 Process

101ST1P

150 RF



-40

538 19.0 Process

103ST1P

300 RF



-40

538 49.6 Process

106SU0P

600 RF



-40

450 82.7 Process

101SC0S

150 RF


Stainless Steel Type 304H + JERES-A-301

0.0 SS 316 -48

538


103SC0S

300 RF


Stainless Steel Type 304H + JERES-A-301

0.0 SS 316 -48

538


101SD1S

150 RF


Stainless Steel Type 316/316L

+ JERES-A-301

1.5 SS 316 -48

538


101ST0S

150 RF


Stainless Steel Type 316 +

JERES-A-301 0.0 SS 316

-48

538 19.0 Sour, Sour +

Hydrogen





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

101ST1S

150 RF



JERES-A-301 1.5 SS 316

-48

538 19.0 Sour, Sour +

Hydrogen

103ST1S

300 RF



JERES-A-301 1.5 SS 316

-48

538 49.6 Sour, Sour +

Hydrogen

101SU0S

150 RF


Stainless Steel Type 316L +

JERES-A-301 0.0 SS 316

-48

450 15.9 Sour, Sour +

Hydrogen

101SU1S

150 RF



JERES-A-301 1.5 SS 316

-48

450 15.9 Sour, Sour +

Hydrogen

101SU2S

150 RF



JERES-A-301 3.0 SS 316

-48

450 15.9 Sour, Sour +

Hydrogen

103SU0S

300 RF



JERES-A-301 0.0 SS 316

-48

450 41.4 Sour, Sour +

Hydrogen

106SU1S

600 RF



JERES-A-301 1.5 SS 316

-48

450 82.7 Sour, Sour +

Hydrogen

106SU2S

600 RF



JERES-A-301 3.0 SS 316

-48

450 82.7 Sour, Sour +

Hydrogen

106SA1S

600 RF



+ JERES-A-301

1.5 SS 316 -48

538


209SA1S

900 RTJ

SS 316 Octag. Ring A193 B7M / A194 Gr. 2HM


+ JERES-A-301

1.5 SS 316 -48

538


225SA1S

2500 RTJ



+ JERES-A-301

1.5 SS 316 -48

538


225SJ1S

2500 RTJ


Stainless Steel 321 + JERES-

A-301 1.5 SS

321/347

-48

538 413.7 Sour, Sour +

Hydrogen

225SJ2S

2500 RTJ


Stainless Steel 321 + JERES-

A-301 3.0 SS

321/347

-48

538 413.7 Sour, Sour +

Hydrogen





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

101SD0C

150 RF


Stainless Steel Type 316/316L 0.0 Monel

-40

80 19.0 Caustic

101SS1C

150 RF


Stainless Steel Type 304L 1.5 Monel

-40

80 15.9 Caustic

101ST1C

150 RF


Stainless Steel Type 316 1.5 Monel

-40

80 19.0 Caustic

103SD0C

300 RF


Stainless Steel Type 316/316L 0.0 Monel

-40

80 49.6 Caustic

101SR0C

150 RF


Stainless Steel Type 304 0.0 Monel

-40

80 19.0 Caustic

101ST0A

150 RF


Stainless Steel Type 316 0.0 Alloy 20

-40

80 19.0 Sulphuric Acid

101SD0A

150 RF


Stainless Steel Type 316/316L 0.0 Alloy 20

-40


103SD0A

300 RF


Stainless Steel Type 316/316L 0.0 Alloy 20

-40


101ST1A

150 RF



-40


101ST2A

150 RF



-40


103ST1A

300 RF



-40


101SW1A

150 RF


Zecor™ + Stainless Steel

Type 310 1.5 Alloy 20

-40


101SU0H

150 RF



-40

450 15.9 Hydrogen





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

103SD1H

300 RF



-40

450 49.6 Hydrogen

103SJ0H

300 RF

Metal Grooved Flex. Graph A453 Gr. 660 CL. A


SS 347

-29

538 49.6 Hydrogen

103SJ1H

300 RF



SS 347

-29

538 49.6 Hydrogen

203SJ1H

300 RTJ



SS 347

-29

538 49.6 Hydrogen

106SJ1H

600 RF



SS 347

-29

538 99.3 Hydrogen

209SJ1H

900 RTJ



SS 347

-29

538 148.9 Hydrogen

215SJ1H

1500 RTJ



SS 347

-29

538 248.2 Hydrogen

225SJ1H

2500 RTJ



SS 347

-29

538 413.7 Hydrogen

225SJ2H

2500 RTJ



SS 347

-29

538 413.7 Hydrogen

103SR0H

300 RF



-40

450 49.6 Hydrogen

106SM0H

600 RF


Stainless Steel Type 347H 0.0 SS 347H

-29

538 99.3 Hydrogen

106SU0H

600 RF



-40

450 82.7 Hydrogen

209SA1H

900 RTJ



-40

450 148.9 Hydrogen





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

215SA1H

1500 RTJ



-40

450 248.2 Hydrogen

206SM0H

600 RTJ

SS 321/347 Octag. Ring A453 Gr. 660 CL. A

Stainless Steel Type 347H 0.0 SS 347H

-29

538 99.3 Hydrogen

206SU0H

600 RTJ



-40

450 82.7 Hydrogen

103SD1X

300 RF



-40

538 49.6 Toxic,

Benzene (<95%)

101NC0P

150 RF

Spiral W. N10276 Graphite A193 B7M / A194 Gr. 2HM

Alloy C276 0.0 UNS N10276

-48

500 20.0 Process

101NT1P

150 RF

Spiral W. N08020 Graphite A193 B7 / A194 Gr. 2H

Alloy 20 UNS N08020 1.5 UNS

N08020

-40

325 15.9 Process

103NT1P

300 RF



N08020

-40

325 41.4 Process

103NY1P

300 RF


Alloy C UNS N06003 1.5 UNS

N08020

-40

425 51.7 Process

215NS1P

1500 RTJ

Octagonal Ring N08825 A193 B7 / A194 Gr. 2H


N08825

-48

538 125.5 Process

225NS1P

2500 RTJ

Octagonal Ring N08825 A193 B7 / A194 Gr. 2H


N08825

-48

538 208.9 Process

101NT1C

150 RF



N08020

-40

138 15.9 Caustic

103NT1C

300 RF

Flat Gasket PTFE A193 B16 / A194 Gr. 4


N08020

-40

200 41.4 Caustic

103NY1C

300 RF


Alloy C UNS N06003 1.5 UNS

N08020

-40

125 51.7 Caustic





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

101NT9A

150 RF


Zecor™ + Alloy 20

UNS N08020 0.8 UNS

N08020

-40


101NT0A

150 RF



N08020

-40


101NT1A

150 RF



N08020

-40


103NT9A

300 RF


Zecor™ + Alloy 20

UNS N08020 0.8 UNS

N08020

-40


103NT0A

300 RF



N08020

-40


103NT1A

300 RF



N08020

-40


103SP1N

300 RF

Spiral W. S32205 Graphite A193 B7M / A194 Gr. 2HM


S32205

-48

316 51.7 Ammonium

Bisulphide

215NS1N

1500 RTJ

UNS N08825 Octag. Ring A193 B7M / A194 Gr. 2HM


N08825

-48

538 258.6 Ammonium

Bisulphide

225NS1N

2500 RTJ

UNS N08825 Octag. Ring A193 B7M / A194 Gr. 2HM


N08825

-48

538 430.9 Ammonium

Bisulphide

201NR1Q

150 RTJ

Nickel 201 Octag. Ring A193 B16 / A194 Gr. 4

Incoloy 800H 1.5 UNS N08151

-29

510 15.9 Chlorination Gas

203NR1Q

300 RTJ

Nickel 201 Octag. Ring A193 B16 / A194 Gr. 4

Incoloy 800H 1.5 UNS N08151

-29

525 41.4 Chlorination Gas

301BD0W

150 FF

Synthetic Fibre A193 B7 / A194 Gr. 2H

90-10 Cu-Ni 0.0 Bronze 0

100 17.5 Utilities, Fire

Water

101CS2W

150 RF

Spiral W. 316 Graphite A193 B7 / A194 Gr. 2H

Carbon Steel 3.0 13 Cr 0 100 19.6

Deoiled Water, Effluent Water,

Oily Water, Sanitary Water, Sludge,Treated Water, Water





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

101CS4W

150 RF


Carbon Steel 6.0 13 Cr 0 100 19.6 WWT, Brine

101SR0W

150 RF



-40

538 19.0 Potable Water

Treated Water

103SR0W

300 RF



-40

538 19.0 Treated Water

106SR0W

600 RF



-40

538 19.0 Treated Water

301FE0P

150 FF

Full Face Elastomeric A307 A or B / A563 Gr. A

Reinforced Thermosetting

Resin 0.0 AL-BR

0

100 17.5

Sea Water, Saline Cooling Water, Neutr.

Water, Cooling Water

301FE0W

150 FF



Resin 0.0

Bronze or Monel or AL-BR

0 100 17.5

Oily Water, Water, Sludge, Slop, Sanitary Water, Treated

Water, Fire Water, Service Water, Deoiled Water, Effluent

Water, Soft Cooling Water,

Auxiliary Cooling Water

301FE0A

150 FF

Full Face Butyl Rubber A307 A or B / A563 Gr. A


Resin 0.0 Teflon

Lined

0

102 4.0 Weak Sulphuric

Acid

301PU0A

150 FF

Full Face Butyl Rubber A307 A or B / A563 Gr. A

CPVC 0.0 SS 316 4

82 ATM Weak sulfuric

acid 2% - 30%

301PU0P

150 FF


CPVC 0.0 Bronze / AL-BR

4

80 8.0 Calcium Hypocl.

Solution

301PU0W

150 FF


CPVC 0.0 Bronze / AL-BR

4

80 8.0 Potable Water

501PD0P

150 FM

Full Face Neoprene A307 A or B / A563 Gr. A

HDPE 0.0 Bronze 4

80 10 Chemical

Product





of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

301PV0W

150 FF


PVC 0.0 Bronze

or Monel or AL-BR

4

50 16 Underground,

Sanitary

301LC0W

150 FF

Synthetic Fibre A307 A or B / A563 Gr. A

Cement Lined Carbon Steel 0.0 Bronze

-29

343 17.2

Oily Water, Water, Sludge, Service Water

301LE0W

150 FF


A194 Gr. 2H

FBE Lined Carbon Steel 0.0 Bronze

0

90 17.2 Waste Water

301LT0P

150 FF

TFE Elastom. Filler, 3mm A193 B7 / A194 Gr. 2H

PTFE Lined Carbon Steel 0.0 PTFE

0

93

Manuf. Std. Spent Caustic

101LT0A

150 RF

Gylon 3540 ring type A193 B7 / A194 Gr. 2H

Teflon Lined Carbon Steel 0.0 PTFE

-29

160 10.3 Sulfuric Acid

101LP0A

150 RF


Polypropylene Lined Carbon

Steel 0.0 Alloy 20

-29

200 10.3 Sulfuric Acid

101LP0P

150 RF


Polypropylene Lined Carbon

Steel 0.0 EPDM

-29

107

Manuf. Std.

Neutralized Water

101CS1XB

150 RF



425

19.6 Benzene (≥95%)

101CS2XB

150 RF



425

19.6 Benzene (≥95%)

103CS1XB

300 RF



425

51.1 Benzene (≥95%)

103CS2XB

300 RF



425

51.1 Benzene (≥95%)

101CH4SM

150 RF



6.0 SS 316 -29

260

19.6

Sour, Sour +


103CH4SM

300 RF



6.0 SS 316 -29

260

51.1

Sour, Sour +






of 403

PIPING CLASS


BASE MATERIAL

C.A. [mm]

VALVE TRIM

TEMP [°C]

Min & Max

PRESS [barg] Max

SERVICE NOTE

101ST0SM

150 RF



JERES-A-301 0.0 SS 316

-48

538 19.0 Sour, Sour +

Hydrogen

103CA1H

300 RF

Metal Grooved Flex. Graph A320 L7 / A194 Gr. 4


1.5 SS 316 -45

232

48.0 Hydrogen

103CA2H

300 RF



3 SS 316 -45

232

48.0 Hydrogen

106CA1H

600 RF



1.5 SS 316 -45

232

102.1 Hydrogen

jeres l-105 piping line class and material specifications

Documents