Maybe you didn’t know you could

take public transportation from Port Townsend to the airport.

You can! It’s inexpensive, easy, almost as fast as

driving your car and no parking hassles!

To the Bainbridge Ferry:

From the Haines Place Park & Ride in Port

Townsend, take Jefferson Transit’s #7 bus to

Poulsbo.

At the end of the line, transfer to Kitsap

Transit’s #90 Express bus to the Bainbridge

Ferry Terminal.

Then walk on the ferry – it’s free when you

make the eastbound crossing.

Once in downtown Seattle, take Sound Transit’s

Link Light Rail from the Pioneer Square Station

to the airport.

Get To LINK Pioneer Square Station:

WALK: If you travel lightly, it is an easy

walk to the Pioneer Square Station transit

tunnel. The least hilly walk is to turn right on

Alaskan Way and left on Yesler, as indicated

on the map. The entrance to the tunnel is just past 2nd Ave, next to Smith Tower. En-

ter the bus tunnel at 2nd Ave. and Yesler

Way.

BUS: If you take the walkway to the1st &

Marion “Southbound Stop”, Metro’s #99

bus comes by every 30 minutes and will take

you to 5th & Jackson, adjacent to the Inter-

national District Train Station. The fare for

this will be either $2.50 for Off-Peak times

or $3.00 for Peak times.

Sound Transit’s Link Light Rail:

Light rail trains depart every 7-15 minutes

depending on the day and time of day. Pur-

chase your ticket upstairs and catch the train

downstairs on the platform level. It takes ap-

proximately 35 minutes from the Pioneer

Square Station to the SEATAC Station.

SeaTac/Airport Light Rail Station is located at

International Boulevard and S. 16th St in

SeaTac. There is a pedestrian walkway that

leads from the light rail station along the side of

the airport garage to the sky bridges and pas-

senger terminal.

Schedule information listed here is subject to change

without notice.

Kitsap Transit

Bus transportation from Poulsbo to the Bainbridge

Island Ferry

(360) 697-2877 or 1-(800)-501-7433

http://www.kitsaptransit.com

Washington State Ferries

(206) 464-6400 for Seattle information

511 Statewide

http://www.wsdot.wa.gov/ferries

Sound Transit (Link Light Rail)

1-(800) 201-4900 1-(888)-889-6368

http://www.soundtransit.org

King County Metro

Public Transportation for Seattle and King County

(206) 553-3000 or 1-(800)-542-7876

http://metro.kingcounty.gov

Does It Really Cost $6.50 to go to

SeaTac?

Jefferson Transit $1.50

Kitsap Transit $2.00

Sound Transit (Light Rail) $3.00

Total: $6.50

Please have exact change for your fares.

Add ferry fare for your return trip. At $8.35 (with

discounts for seniors, youth and people with disabil-

ities) your return trip will cost between $12 and

$16. There’s still no better deal around! Boarding

Jefferson Transit buses outside of Jefferson County

requires a $1.00 out of county surcharge.

Coast Gateway Hotel 18415 International Blvd.

SeaTac, WA 98188

(206)248-8200

Request “Jefferson Transit Airport Discount” to receive

discounted rate. There is 24/7 shuttle service between

hotel and airport.

Yesler Way

Updated: October 2, 2017

JEFFERSON TRANSIT

For more information call:

(360) 385-4777

www.jeffersontransit.com

Enjoy Seattle

or

go to SeaTac

Airport for as

low as $6.50!

How Do You Do It?

Have a question? Call us at (360) 385-4777 and we will walk you through the process. Note: Schedules are subject to change without notice. Please contact the proper transportation provider for current information before beginning your trip. Weather conditions and other uncontrollable factors may delay routes, causing missed connections. Please allow extra time to get to your destination.

Walk or Metro #99

Depart Haines

Place P & R

Arrive North Viking

Park & Ride

Depart North

Viking Park & Ride

Arrive Bainbridge

Island Ferry Dock

Depart Bainbridge

Island Ferry DockArrive Seattle

Depart Seattle

Pioneer Square

Arrive SeaTac

Station

5:59 AM 6:59 AM 7:12 AM 7:45 AM 7:55 AM 8:30 AM

9:15 AM 10:18 AM 10:30 AM 11:05 AM 11:30 AM 12:05 PM

3:12 PM 4:16 PM 4:35 PM 5:10 PM 5:30 PM 6:05 PM

5:08 PM 6:12 PM 6:15 PM 6:50 PM 7:10 PM 7:45 PM

9:25 AM 10:25 AM 10:30 AM 11:05 AM 11:30 AM 12:00 PM

2:30 PM 3:30 PM 4:00 PM 4:25 PM 4:35 PM 5:05 PM

Walk

Depart SeaTac

Station

Arrive Seattle

Pioneer SquareDepart Seattle

Arrive Bainbridge

Island Ferry Dock

Depart Bainbridge

Island Ferry Dock

Arrive North Viking

Park & Ride

Depart North

Viking Park & Ride

Arrive Haines Place

Park and Ride

6:10 AM 6:45 AM 6:55 AM 7:25 AM 7:26 AM 8:27 AM

9:35 AM 10:10 AM 10:15 AM 10:48 AM 10:53 AM 11:54 AM

*3:00 PM 3:35 PM 3:40 PM 4:30 PM 5:05 PM 6:09 PM

5:30 PM 6:05 PM 6:07 PM **6:45 PM **6:46 PM 7:47 PM

** Notify Driver of Connection

- - - - 10:43 AM 11:43 AM

2:05 PM 2:40 PM 2:50 PM 3:25 PM 4:08 PM 5:08 PM

Saturday

Light rail trains leave Pioneer Square Station

starting at 5:07 am and runs until 12:43 am.

Trains run every 7-15 minutes depending on the

time of day. Apprx. 35 Minutes Travel Time.

Light rail trains leave Pioneer Square Station

starting at 5:07 am and runs until 12:43 am.

Trains run every 7-15 minutes depending on the

time of day. Apprx. 35 Minutes Travel Time.

Port Townsend to SeattleMonday- Friday

Jefferson Transit #7 Kitsap Transit #90 Bainbridge Island Ferry Central Link Light Rail

See reverse for more

information.

See reverse for more

information.

Light rail trains leave SeaTac Airport starting

at 5:04 am and run until 12:10 am. Trains run

every 7-15 minutes depending on the time of

day. Apprx. 35 Minutes Travel Time.

Saturday

Light rail trains leave SeaTac Airport starting

at 5:04 am and run until 12:10 am. Trains run

every 7-15 minutes depending on the time of

day. Apprx. 35 Minutes Travel Time.

Seattle to Port TownsendMonday- Friday

Central Link Light Rail Bainbridge Island Ferry Kitsap Transit #90 (90 Express PM) Jefferson Transit #7

* If you take the later 3:45 PM ferry arriving Bainbridge at 4:20 PM, you need to take Kitsap 90 Express leaving at 4:22

PM arriving at the North Viking Transit Center at 5:00 PM. This is a very close connection.

See reverse for more

information.

See reverse for more

information.