jd edwards enterpriseone process manufacturing presentation quest infocus 2016
TRANSCRIPT
![Page 1: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/1.jpg)
Prepared by:
Keith Figgins, CPIM
Senior Consultant
Mitchell and Associates
Session ID#: JDE-104910
#JDEINFOCUS or add your own Twitter handle
Process ManufacturingEnterpriseOne v9.2
Configuration, Costing, Shop Floor Control and Manufacturing Accounting
![Page 2: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/2.jpg)
Agenda
1. Define Process Manufacturing
2. Configuration and Setup
3. Costing
4. Creating and Executing Process WO’s
5. Manufacturing Accounting
![Page 3: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/3.jpg)
1. Definition of Process ManufacturingProcess manufacturing is the branch of manufacturing that is associated with formulas and
manufacturing recipes, and can be contrasted with discrete manufacturing, which is
concerned with bills of material and routing.
The simplest and easiest way to grasp the definition of process manufacturing is to
recognize that, once an output is produced by this process, it cannot be distilled or
reworked back to its basic components. In other words, "once you put it together, you
cannot take it apart". A can of soda cannot be returned to its basic components such as
carbonated water, citric acid, potassium benzoate, aspartame, and other ingredients.
Juice cannot be put back into an orange. A plastic card manufactured cannot be
returned to its basic components like PVR sheets, transparent sheets.
A car or computer, on the other hand, can be disassembled and its components, to a large
extent, returned to stock.Process manufacturing is common in the food, beverage,
chemical, pharmaceutical, consumer packaged goods, and biotechnology industries. In
process manufacturing, the relevant factors are ingredients, not parts; formulas, not bill of
materials; and bulk, not individual units.
This is more than a subtle difference in terminology; the terms characterize distinct
manufacturing approaches.
![Page 4: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/4.jpg)
1. Process Manufacturing: Overview
Process manufacturing produces products such as liquids, fibers, powders, or
gases. Pharmaceuticals, foodstuffs, and beverages are typical examples of
process products and represent a significant share of the manufacturing
market.
Process manufacturing enables multiple products to be made as
coproducts,stocked and sold as separate items; whereas standard discrete
bills of material (P3002) only allow one parent item to be produced per bill
structure. It isnot possible to run or complete a process in terms of decimals.
Master routings are not used in process manufacturing because the process
outputs, co and byproducts, are usually different for each process. All of the
variables in the process are controlled by the routing and it is not possible to
make different products with the same ingredients and process.
Master routings are used for discrete manufacturing only.
Standard Cost is used. Actual or Average Manufacturing costs are not used.
![Page 5: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/5.jpg)
![Page 6: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/6.jpg)
1. Raw Beet to Thick Juice
2. Creating MOL
3. Thick Juice to Crystalized Sugar
4. Molasses to Separator
5. Betaine
6. Wet Pulp to Dry Pulp
Other:
7. Sugar Packaging (Discrete WO’s)
1. Process Manufacturing-Sugar
![Page 7: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/7.jpg)
1. Create weekly Process WO for each Process (6)
2. Record Inventory issues to each Process WO.
3. Record or backflush labor.
4. Backflush machine hours against each WO
5. Record Process Completions every 24 hours
6. Create WIP general Ledger entries daily
7. Materials and labor/machine costs to be recognized at the relevant
process.
8. Close weekly WO’s and record WIP and Variances for the Process
WO’s
1. Process Manufacturing-EnterpriseOne Solution
![Page 8: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/8.jpg)
2. Process Manufacturing Configuration Steps
1. Create item and item branch plant records (G4111/P41026) for the process, co, byproducts, intermediates
2. Create or validate work centers (G3012/P3006)
3. Enter process routing and operation sequences (G3012/P3003)
4. Create bill of material, with substitutes (from within Enter/Change Process)
5. Enter Co/By products list
6. Enter intermediates
7. Run Integrity Analysis (R30601)
8. Setup Costing for Ingredients and Work Centers
9. Simulate and Freeze Costs
![Page 9: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/9.jpg)
2. Inventory: Process, Ingredients, Co/By Products
![Page 10: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/10.jpg)
2. Process Item Master
Stock Type =R Line Type = M
Process is the Parent Item. No inventory stock maintained.
![Page 11: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/11.jpg)
2. Intermediate Item Master
Stock Type =M Line Type = NNo inventory stock maintained. Consumed in subsequent process.
![Page 12: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/12.jpg)
2. Co Product (Finished Good) Item Master
Stock Type =M Line Type = S
![Page 13: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/13.jpg)
2. By Product (also a Finished Good)
Stock Type =M Line Type = S
![Page 14: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/14.jpg)
2. Relevant Units of MeasureSystem uses four fields in the Item Master table (F4101) throughout shop floor as default values in entry forms:Component, Production, and Primary/Secondary Unit of Measure. Primary Unit of Measure value must be the smallest of the three units of measure.
Intermediates can be any valid unit of measure as long as the conversion is set up, however process manufacturing was not intended to be setup with Units of Measure conversions for the Process itself. Since the process is just that, a process, it is a multiplier for how many of the processes to achieve.
Typically, more than one coproduct is produced by the process and uses only one bill of material without using a unit of measure conversion for the process. The coproducts and ingredients should be set up with the unit of measure as they are processed.
![Page 15: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/15.jpg)
2. Work Centers
![Page 16: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/16.jpg)
2. WC Rates (with Frozen Costs)
![Page 17: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/17.jpg)
2. Setup the Process
The 'Cons/Prod' column indicates that ingredients are consumed, co/byproducts will be produced and outputted at this step, or both happen. Intermediates on the operation will highlight this field in Pink.
![Page 18: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/18.jpg)
2. Setup the Process
Enter the Resource Percent % (RSCP). This field controls how much of
the ingredients are issued for each of the co/by products at a certain step.
Ingredients may be issued separately at time of completion or as a total
issue of all ingredients.
The Resource % is used when Inventory Issues (P31113) are called from
Work Order Completions (P31114),and the P31114 Processing Option #
2, Issues Ingredients to Co/By Products, on tab 6, Process Mfg, is set
to'1'.
For Completions with Backflush, validate that the ingredient issue type
code is set to 'B' and that the processing option of P31113 (the version
called by P31114) has option # 3, Issue Material For, on the ‘Display’ tab
set to 1. Enter the Op Seq # (Operation Sequence number OPSQ). This
is the routing operation where the co or byproduct is produced from.
Enter the Co/By Line # (Component Line Number CPNB).
![Page 19: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/19.jpg)
2. Intermediates are Tied to a SequenceIntermediate products are items defined as a result of a step but are automatically consumed in the next step. They are nonstock items and are only defined steps with a paypoint for reporting purposes. Intermediates enable the tracking of the quantity of output of any operation in a work center at a specific time. They can be defined in any unit of measure. Intermediates cannot be defined as an ingredient in the process in which it is produced. Set up one intermediate per operation, but do not define an intermediate for the last operation in a routing instruction
![Page 20: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/20.jpg)
2. By/Co Products are Tied to a Routing Sequence
![Page 21: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/21.jpg)
2. BOM/Ingredients Tied to an Op Seqence
![Page 22: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/22.jpg)
Substitutes highlighted in Green
2. Ingredients
![Page 23: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/23.jpg)
2. Co and By Product Inquiry
![Page 24: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/24.jpg)
3. Cost Rollups:Simulate Costs R30812 and Freeze Costs R30834
![Page 25: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/25.jpg)
3. Product Costing Process and Co/By Products (P30026)
![Page 26: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/26.jpg)
3. Product Costing Process and Co/ByProducts (P30026)
![Page 27: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/27.jpg)
3. Co-Product Costing (P30026)
![Page 28: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/28.jpg)
3. By-Product Costing
![Page 29: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/29.jpg)
3. Costed BOM P30206 (only at Process Level)
![Page 30: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/30.jpg)
3. Costed Routing P30208 (only at Process Level)
![Page 31: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/31.jpg)
4. Shop Floor Control: Create WO and Process WO (R31410)
![Page 32: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/32.jpg)
4. BOM integrated in Routing
![Page 33: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/33.jpg)
4. Co and By Products as WO/Routing Exit
![Page 34: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/34.jpg)
4. Ingredient Parts List
![Page 35: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/35.jpg)
4. Enter/Process WO Time (or Backflush Labor)
![Page 36: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/36.jpg)
4. WO Completions P31114 Processing Option
JD Edwards EnterpriseOne supports both partial and full work order Completions (P31114), with or without Backflush, and Super Backflush (P31123) for completing a process work order.
![Page 37: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/37.jpg)
4. WO Completions P31114
![Page 38: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/38.jpg)
4. P31114 calls Co/By Product Completion
![Page 39: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/39.jpg)
4. WO Completions P31114 in Decimal Instance
![Page 40: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/40.jpg)
4. P31114 calls Co/By Product Completion in Decimal Instance
![Page 41: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/41.jpg)
4. WO Inventory Issues P31113:Parts displayed by WO Sequence
![Page 42: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/42.jpg)
5. Costing Options relevant Process Manufacturing
![Page 43: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/43.jpg)
5. WIP DMAAI’s: Consume materials in related Process
![Page 44: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/44.jpg)
5. Manufacturing GL Entries by WC (Material Issues)
![Page 45: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/45.jpg)
5. Manufacturing GL Entries by WC (Labor/Machine)
![Page 46: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/46.jpg)
5. Production Inquiry (P31022) Expected Costs and Variance costs by WC
![Page 47: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/47.jpg)
Questions & Answers
![Page 48: JD Edwards EnterpriseOne Process Manufacturing Presentation Quest Infocus 2016](https://reader031.vdocuments.us/reader031/viewer/2022020410/58cf304a1a28ab00168b5725/html5/thumbnails/48.jpg)
Please complete the session evaluationWe appreciate your feedback and insight
Session ID# JDE-104910