jcb inc. - pricelist december 2013 sts # 800126procure.ohio.gov/pricelist/800126revpricelist.pdf ·...
TRANSCRIPT
JCB Inc. - PricelistDecember 2013STS # 800126
Please note: All Contract terms and conditions shall supersede any terms provided in the contractor
price catalog. All shipments under the contract are FOB Destination – Prepaid.
SSL/CTL Discount Mini-Excavators Discount
135 15% 8008 20%
150T 15% 8018 22%
155 15% 8025 20%
175 15% 8030 22%
190 15% 8035 22%
190T 15% 8040 22%
205 15% 8045 30%
205T 15% 8055 20%
225 15% 8065 20%
225T 15% 8085 28%
260 15% Excavators Discount
260T 15% JS145 23%
280 15% JS160 23%
300 15% JS190 23%
300T 15% JS220 21%
320T 15% JS260 23%
330 15% JS330 20%
Telescopic Handlers Discount JS360 20%
515-40 15% Backhoe Discount
520-40 26% Midi CX 18%
520-50 29% 2CX-12 25%
524-50 26% 3CX-14 20%
527-55 26% 3CX-14 Super 31%
531-70 26% 3CX-15 Super 32%
531-70T 23% 3CX-17 Super 40%
535-140 25% 4CX-14 Super 28%
541-70T 22% 4CX-15 Super 32%
550-140 27% 4CX-17 Super 40%
550-170 25% Compaction Discount
506-36 20% VM1500 25%
507-42 20% VMT160-90 20%
509-42 20% VMT260-100 30%
510-56 22% VMT260-120 30%
512-56 22% VM75D 28%
514-56 22% VM75PD 28%
Wheel Loaders Discount VM115D 30%
406 27% VM115PD 30%
409 27% VM132D 30%
411 30% VM132PD 30%
416 30% Fastrac Discount
417 30% 3230 XTRA 22%
427HT 30% 8280 22%
427ZX 30% 8310 22%
STS# 800126 - 2013 JCB Pricing Structure
437HT 30% RTFL Discount
437ZX 30% 930-2 30%
457HT 30% 930-4 32%
457ZX 30% 940-2 26%
TM320 15% 940-4 28%
Workmax Discount 950-4 32%
800D 20%
Backhoe Loader
JCB BACKHOE LOADER
MIDI CX
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
MIDI CX U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
SAFETY Four post Roll Over Protection structure (ROPS), Falling Objects Protective Structure (FOPS).
Retractable seat belt. Equipped with independent over center park brake and loader service safety strut.
Fuel and Hydraulic tank fitted with lockable caps. Backhoe is equipped with, boom lock activated from
the operator area as well as a swing lock. Front and rear horn. Automatic reverse alarm.
ENGINE Water cooled, 4 cylinder, direct injection Tier III diesel engine with 2 valves per cylinder. Equipped with cold
start aid. Hand and foot operated throttle, 50 gross hp. Duel element dry type air cleaner.
Full flow pressure engine oil lubrication with spin on oil filter. Separately serviceable air to fluid radiator.
Fuel system with two stage filtration, utilizing water/sediment separator and spin on secondary fuel filter.
TRANSMISSION Separate unit mounted to the engine, Switchable 2 speed hydrostatic unit, connected to the front and rear
axles via drive shafts. 2 Speeds in forward and reverse, column mounted electrical forward / reverse
shuttle (no clutch required to change direction). Air to fluid transmission cooler, Pressure lubrication with spin on
spin on oil filter.
FRONT AXLE 4 WD front axle. Industrial duty with outboard planetary final reduction drives. Hydrostatic power
steering with priority valve steering cylinder is located high and behind the axle for maximum protection.
REAR AXLE Separate heavy duty axle mounted to the frame of the machine and connected to the transmission via
drive shafts. Final drives out board mounted planetary gear design. JCB Max-Trac limited slip differentials.
BRAKES Sealed wet multi disc type service brakes independent of the park brake, brakes can be independently
operated or locked together via a lock bar mounted on the brake peddles. Over center actuation
mechanical park brake that disconnects the transmission.
STEERING Hydrostatic power steering with priority valve. Steering wheel lock to lock is 2.5 turns. Steering cylinder is
mounted high and behind the front axle for protection. Turning circle 11'8"
BACKHOE AND Removable centermount 10' dig depth backhoe with fixed dipper including fabricated boom and dipper,
MAINFRAME stabilizers mounted to the rear frame. All hoses routed through the king post. Dipper breakout 4,548 lbs
and bucket breakout capable of 6,025 lbs.
LOADER Equipped with an integrally mounted front end loader using two lift cylinders and two bucket cylinders.
Standard skid steer quick attach system, mechanical anti spill design. Loader pin height is 9' 6".
Lift capacity 3,478 lbs and bucket breakout of 5,830 lbs.
All prices and specifications subject to change without notice page 2 of 6 MIDI CX USD Price Page
MIDI CX U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT (CONT.)
ELECTRICAL SYSTEM 12 volt system with 65 amp alternator all electrical connections are to IP69 standards. Single
maintenance free battery rated at 680 cold cranking amps. Two halogen work lights front and rear
including turn signals, equipped with four way hazards as standard. Backlit instrumentation panel
mounts on the side dash consisting of tachometer, fuel gauge and digital hour meter. Warning lights
for battery charge, coolant temperature, engine oil pressure, transmission oil temperature, transmission
oil pressure, air cleaner restriction, water in fuel, parking brake engaged. Battery isolator as standard.
OPERATORS FOPS (Falling Objects Protection) and ROPS (Roll Over Protection) open canopy, entry from both sides,
ENVIRONMENT full floor mat , interior rear view mirror, static vinyl seat with adjustment for leg support, back angle,
forward and back with turn around. Two inch retractable seatbelt. cup holder.
HYDRAULIC SYSTEM Three hydraulic pumps, one transmission charge pump, one transmission hydrostatic pump and one
hydraulic gear pump for services. Externally mounted hydraulic pannier tank with lockable cap. Structural
steel pipes where possible and hoses have burst pressure 4 times higher than working pressure. Service
pump output is 19.8 gpm.
SERVICEABILITY All service check points are done at ground level, engine oil check and top off, transmission check and
AND MAINTENANCE top off, brake fluid check, windshield check, fuel fill and hydraulic check and top off. Easy opening one
piece hood, with lockable grill.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILD
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NOT CURRENTLY OFFERED
DEALER FIT - BACKHOE LOADERS (LISTED SEPARATELY FOR ALL BACKHOES)
All prices and specifications subject to change without notice page 3 of 6 MIDI CX USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
CANOPY PACKAGE BUILD CODE: 2920A 2920B
SALES 3 PT HITCH
CODE ITEM PTO
2920 MIDI CX 10ft removable centermount backhoe, 50Hp diesel engine
100A503 Centermount 10ft fixed dipper with bi-directional / hammer pipework
100A506
100B501 10 x 16.5 Front tires and 17.5 x 24 rear tires - Industrial traction tires
100C502 Open ROPS and FOPS Canopy with front windshield and fixed vinyl Seat
100D302 12" Backhoe bucket
100E501 GP bucket - 0.46 cu.yd.
100F528 Operator Manual Pack - English
100R501 Loader Auxilary circuit for non PTO builds
100R503 Loader Auxilary circuit for PTO builds
100X501 Reverse Alarm
100P501 Bolt on cutting edge
SUGGESTED LIST PRICE $55,250 $58,092
CAB PACKAGE BUILD CODE: 2920C 2920D
SALES 3 PT HITCH
CODE ITEM PTO
2920 MIDI CX 10ft removable centermount backhoe, 50Hp diesel engine
100A523 Centermount 10ft fixed dipper with bi-directional / hammer pipework
100A526
100B501 10 x 16.5 Front tires and 17.5 x 24 rear tires - Industrial traction tires
100C503 ROPS and FOPS Cab with suspension seat
100D302 12" Backhoe bucket
100E501 GP bucket - 0.46 cu.yd.
100F528 Operator Manual Pack - English
100R501 Loader Auxilary circuit for non PTO builds
100R503 Loader Auxilary circuit for PTO builds
100X501 Reverse Alarm
100P501 Bolt on cutting edge
SUGGESTED LIST PRICE $56,745 $59,587
MIDI CX
Centermount 10ft fixed dipper with bi-directional / hammer pipework, three point hitch, PTO
and creep speed
Centermount 10ft fixed dipper with bi-directional / hammer pipework, three point hitch, PTO
and creep speed
Select one of the following machine PACKAGE BUILD codes. Package build configurations cannot normally be changed. If
a Package Build does not meet your requirements please order a machine using the Custom Build Section, Options &
Attachments Sections following.
All prices and specifications subject to change without notice page 4 of 6 MIDI CX USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
2920 MIDI CX 10ft removable centermount backhoe, 50Hp diesel engine $41,875
100A501 $1,137
100A502 $3,411
100A503 $1,707
100A504 $3,980
100A505 $3,980
100A506 $4,549
100A509 ($6,002)
100A521 $1,137
100A522 $3,411
100A523 $1,707
100A524 $3,980
100A525 $3,980
100A526 $4,549
100A509 ($6,002)
WHEELS AND TIRES (E)
100B501 10 x 16.5 Front tires and 17.5 x 24 rear tires - Industrial traction tires $3,298
100B502 10 x 16.5 Front tires and 17.5 x 24 rear tires - Turf tires $3,866
OPERATOR'S ENCLOSURE (E)
100C502 Open ROPS and FOPS Canopy with front windshield and fixed vinyl Seat $4,485
100C503 ROPS and FOPS Cab with suspension seat $5,980
BACKHOE BUCKETS (E)
100D300 NO Excavator Bucket $0
100D301 9" Backhoe bucket $625
100D302 12" Backhoe bucket $740
100D303 14" backhoe bucket $967
100D304 16" backhoe bucket $1,137
100D305 18" Backhoe bucket $1,251
100D306 24" Backhoe bucket $1,535
FRONT BUCKETS (E)
100E500 No Loader bucket $0
100E501 GP bucket - 0.46 cu.yd. $1,707
100E502 6 in 1 bucket - 0.46 cu. Yd. $3,298
OPERATOR'S MANUAL (E)
100F528 Operator Manual Pack - English $0
100F517 Operator Manual Pack - French $0
100F521 Operator Manual Pack - Spanish $0
HYDRAULIC CIRCUIT (E)
100R501 Loader Auxilary circuit for non PTO builds $700
100R502 Loader Auxilary circuit with detent for non PTO builds $796
100R503 Loader Auxilary circuit for PTO builds $700
REVERSE ALARM (E)
100X501 Reverse Alarm $227
BACKHOE FOR CAB BUILDS (E)
Centermount 10ft fixed dipper
MIDI CX
CHOOSE THE CORRECT 'A' CODE DEPENDENT ON THE OPERATOR ENCLOSURE TYPE
BACKHOE FOR CANOPY BUILDS (E)
Centermount 10ft fixed dipper
Centermount 10ft fixed dipper with bi-directional / hammer pipework, three point hitch, PTO and creep speed
"No Backhoe" with three point hitch, PTO and creep speed
"No Backhoe" with three point hitch, PTO and creep speed
Centermount 10ft fixed dipper and three point hitch
Centermount 10ft fixed dipper with bi-directional / hammer pipework
Centermount 10ft fixed dipper with bi-directional / hammer pipework and three point hitch
Centermount 10ft fixed dipper, three point hitch, PTO and creep speed
Centermount 10ft fixed dipper with bi-directional / hammer pipework, three point hitch, PTO and creep speed
Centermount 10ft fixed dipper and three point hitch
Centermount 10ft fixed dipper with bi-directional / hammer pipework
Centermount 10ft fixed dipper with bi-directional / hammer pipework and three point hitch
Centermount 10ft fixed dipper, three point hitch, PTO and creep speed
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code
from each E (Essential) category below. Select Options from Section 3 if necessary.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 5 of 6 MIDI CX USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
ADDITIONAL BACKHOE BUCKETS
100K302 Bucket - 12" wide 2.0 cu. ft. $740
100K303 Bucket - 14" Wide $967
100K306 Bucket - 24" wide 4.25 cu. ft. $1,535
100K323 Bucket - 18" wide 3.17 cu. ft. $1,252
MISCELLANEOUS OPTIONS
100P501 Bolt on cutting edge $512
STABILIZER RAM GUARDS
100Y501 Stabilizer ram guards $569
OPERATORS AREA
100Z501 Air Conditioning for cab builds $3,738
QUICKHITCH
100K310 Quick Coupler for Backhoe Bucket - MECHANICAL (not compatible w/ Cemetery Buckets) $1,259
MIDI CX
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 MIDI CX USD Price Page
JCB BACKHOE LOADER
2CX 12FT
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
SAFETY & SECURITY Four post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, fuel cap, and steel instrument vandal cover . Front and rear horn buttons. Automatic reversing
alarm.
ENGINE Water-cooled, 4 cyl, direct injection diesel, 268 CID (4.4 liter). Hand and foot throttle.
75 gross hp @ 2200 rpm. Dual element air filter, dry type with cleanable outer element and
replaceable inner element. Full flow pressure engine oil lubrication with spin-on filter
cartridge. Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil
coolers. Two stage fuel filtering system utilizing a water/sediment separator and spin-on type
filter element.
TRANSMISSION Separate unit mounted to engine containing 2.78:1 torque converter and all transmission
components. Connected to rear axle via drive shaft. Manual gear selection with 4 Fwd / 4 Rev
speeds. Synchronized shifts in all gears. Electrically operated shuttle control on column. Electrically
operated transmission disconnect on gear shift and loader levers. Pressure lubrication with spin on
cartridge filter.
FRONT AXLE 4WD - JCB Max-Trac steer drive torque proportioning, outboard planetary reduction axle, steering
cylinder located behind front axle. 13200 lb. Static load rating: 6600 lb. Dynamic load rating;
10487 lb. SAE J43.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. 4WD - JCB Max-Trac drive
torque proportioning, outboard planetary reduction axle, steering cylinder located in front of rear
axle. 13200 lb. Static load rating; 6600 lb. Dynamic load rating; 10220 lb. SAE J43.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Hydraulically actuated with 5 discs per brake. Over center actuation 11" disc type park brake.
Transmission shifts to neutral when park brake is activated.
STEERING Hydrostatic power, with priority valve. Steering wheel lock to lock equals 4 turns Unbraked
turning circle 23' 9".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sideshift frame with 3' 3"
MAINFRAME kingpost offset capability and vertical stabilizers. Mainframe and stabilizers within loader bucket
width. Fabricated equal length boom and dipper. SAE Maximum dig depth: 12'; Rear Auxiliary
hydraulics (1-way flow); All backhoe hoses routed through king post with junction plate.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard using mechanical self leveling during loader raise and lower functions.
Dump height: 7' 11", Load over height - 9' 10". Auxiliary loader hydraulics and hydraulic quickhitch
standard. Dump reach at full height: 33". Lift capacity to full height: 4850 lbs.
2CX 12FT BACKHOE LOADER
All prices and specifications subject to change without notice page 2 of 7 2CX 12FT USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT (CONT.)
ELECTRICAL SYSTEM 12 volt system with 95 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and two separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge and digital hour meter. Light and
alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, and park brake engaged. Light
indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Battery isolator as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, back angle and retractable seat belt.
ENVIRONMENT standard. Left side entry, full floor mat, fixed steering column, exterior mirrors, pre-wired for
beacon, cup holders, storage compartment. Cab also incl. operable right side window, one piece rear
window to open overhead. Operator ear noise level at 78 dba at rated speed no load. Heater with
defogger vents. SAE Backhoe controls
HYDRAULIC SYSTEM Open center system with one engine driven gear pump. Separate oil reservoir not shared with
other systems, externally mounted to mainframe for ground level servicing. Abrasion protection of
valve to boom hoses. Hoses have burst pressure of 4 times working pressure. Structural steel pipes to
withstand minor impacts. Pump output 17 gpm @ 3335psi.
SERVICEABILITY Check for engine and transmission oil, brake fluid, engine coolant, and windshield washer levels.
AND MAINTENANCE Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid, fuel, and engine
coolant. Tilt engine hood with fine mesh front grill. 22 gallon fuel tank.
15.3 gallon hydraulic tank with 10 micron filter. 500 hr engine oil and filter service
interval. 2000 hour hydraulic oil and 500 hour hydraulic filter service interval.
2CX 12FT BACKHOE LOADER
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOE LOADERS (LISTED SEPARATELY FOR ALL BACKHOES)
All prices and specifications subject to change without notice page 3 of 7 2CX 12FT USD Price Page
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 0282A 0282BSALES 2CX 12FT 2CX 12FT
CODE ITEM CAB CANOPY
0282 2CX 12FT, Sideshift Backhoe Base Machine
100A350 Four Wheel Steer Tire Indicator
100B324 Goodyear Traction Tire 12.5 x 18
100C325 CAB - Deluxe, left side entry ROPS/FOPS
100Y102 Floormat for Cab builds (order with C325)
100X314 Block Heater (for use w/ CAB machines only)
100C327 CANOPY with front windshield and floor mat
100Y100 Floormat for Canopy builds (order with C327)
100F328 Operator Manual Pack - English
100D300 NO Excavator Bucket
100E413 Loader Bucket - General Purpose, 1.0 yard, 77 " wide
100P306 Bolt-On Cutting Edge (for 1.0 cu. yd. 77" bucket)
100Y321 ISO Excavator
SUGGESTED LIST PRICE $83,274 $80,663
2CX 12FT BACKHOE LOADER
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) from the section at the bottom of this
sheet. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements
please order a machine using the Custom Build, Options & Attachments Sections following.
All prices and specifications subject to change without notice page 4 of 7 2CX 12FT USD Price Page
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
0282 2CX 12FT, Sideshift Backhoe Base Machine $71,103
TIRES (E) Order "100A350" and one "100B" code.
100A350 Four Wheel Steer Tire Indicator $0
100B324 Goodyear Traction Tire 12.5 x 18 $2,751
100B323 Michelin XMCL Radial Traction Tire 340/80 x 18 $3,937
100B332 Goodyear Turf Tire 340 / 65 x 18 $4,379
OPERATORS AREA Order one 100C and one 100Y code.
100C325 CAB - Deluxe, left side entry ROPS/FOPS $6,836
100C327 CANOPY with front windshield and floor mat $4,379
100Y102 Floormat for Cab builds (order with C325) $0
100Y100 Floormat for Canopy builds (order with C327) $0
BACKHOE BUCKETS
100D300 NO Excavator Bucket $0
100D320 Bucket - 9" wide 1.5 cu.ft. $669
100D321 Bucket - 12" wide 2.0 cu. ft. $741
100D323 Bucket - 18" wide 3.17 cu. ft. $1,156
100D324 Bucket - 24" wide 4.25 cu. ft. $1,503
LOADER BUCKETS
100E300 No Loader bucket $0
100E411 Loader Bucket - General Purpose, 0.8 yard, 73 " wide $1,486
100E413 Loader Bucket - General Purpose, 1.0 yard, 77 " wide $1,733
100E415 Loader Bucket - 6 in 1 - 0.8 yard, 73" wide $4,425
OPERATORS HANDBOOK (E)
100F328 Operator Manual Pack - English $0
100F332 Operator Manual Pack - French $0
BACKHOE CONTROLS
100Y321 ISO Excavator $106
2CX 12FT BACKHOE LOADER
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code
from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 5 of 7 2CX 12FT USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
POWERTRAIN OPTIONS
100X314 Block Heater (for use w/ CAB machines only) $154
100Y401 Pre-Cleaner $174
100W304 Axles - Limited Slip Front and Rear $1,447
100Y329 Front wheel fenders for 18in wheels ( NEW FACTORY BUILT ORDERS:) $651
OPERATORS AREA
100X313 Fan - Face Level $161
100Z006 Air Conditioning w/ Vandal Cover (NEW FACTORY BUILT ORDERS ONLY) $4,547
100X323 Driving Lamps and Rear Indicator Lamps - Mid Level $281
HYDRAULICS OPTIONS
100R304 Loader Valve Block - 3 Spool w/ loader bucket return-to-dig $460
100R306 Loader Valve Block - 3 Spool w/ double detent and loader bucket return-to-dig $1,647
100Y419 Smooth Ride System (NEW FACTORY BUILT ORDERS ONLY) $1,693
100V316 $1,146
2CX 12FT BACKHOE LOADER
Hand Held Tool Circuit (NEW FACTORY BUILT ORDERS ONLY)
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 7 2CX 12FT USD Price Page
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
LOADER ATTACHMENTS - For loader Quickhitch
100P304 Bolt-On Cutting Edge (for 0.8 cu. yd. 73" bucket) $543
100P306 Bolt-On Cutting Edge (for 1.0 cu. yd. 77" bucket) $591
100P402 Pallet Forks and Frame - 48" long forks $2,646
100Q107 Quick Hitch Blank (use with JCB approved allied attachments) $863
100Q103 Truss Boom - 2' w/ Hydraulic Winch (uses Quickhitch circuit to operate) $8,117
BACKHOE BUCKETS
100Q117 Cemetery bucket - 30", 6.0 cu. ft. capacity -LESS teeth $1,456
100Q119 Cemetery bucket - 36", 7.4 cu. ft. capacity -LESS teeth $2,240
100K308 Bucket - Grading - 48" wide 2.1 cu. ft. $1,364
BACKHOE BUCKET QUICK COUPLER
100K310 Quick Coupler for Backhoe Bucket - MECHANICAL (not compatible w/ Cemetery Buckets) $1,259
BACKHOE BUCKET LINKS
100Y313 Tipping Link w/ Lift Hook $216
STABILIZER PADS
100Y319 Stabilizer Pad - Street (rubber) $427
2CX 12FT BACKHOE LOADER
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 7 of 7 2CX 12FT USD Price Page
JCB BACKHOE LOADER
3CX-14CENTERMOUNT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA EFFECTIVE: JANUARY 1, 2013
STANDARD EQUIPMENT
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks operate with ignition key. Front and rear horn buttons.
Automatic backup alarm.
ENGINE 74 HP Turbocharged, water-cooled, 4 cyl, direct injection diesel, 268 CID (4.4 liter) T4i engine.
Hand and foot throttle. Full flow pressure engine oil lubricant with spin-on filter cartridge.
Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil coolers.
Two stage fuel filtering system utilizing a water/sediment separator and spin-on type filter element.
Dual element air filter, dry type with cleanable outer element, replaceable inner element and under
hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers. with 4 forward and
4 reverse speeds.
FRONT AXLE 2WD - Industrial duty bar with steering cylinder located behind front axle.
4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide
automatic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake.
Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2WD activated by
switch.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle 2WD - 26'5", 4WD - 27'2".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Std dipper - 14' 7", Extradig dipper - 14' 7" - 18' 6". Two lever, JCB (SAE)
backhoe controls. Fabricated stabilizer legs with anti-drift valves.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig standard. Dump reach at full height - 32".
3CX 14FT BACKHOE LOADER
All prices and specifications subject to change without notice page 2 of 8 3CX-14FT USD Price Pages
U.S. DOLLAR PRICE
PAGES
F.O.B. SAVANNAH,
GAEFFECTIVE: JANUARY 1, 2013
STANDARD EQUIPMENT (CONT.)
ELECTRICAL SYSTEM 12 volt system with 95 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp, air cleaner restriction, water in fuel indicator and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator as standard.
OPERATORS Fixed vinyl seat standard. Two door entry with deluxe trim. Composite sure grip molded floor,
ENVIRONMENT tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab also
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs.
HYDRAULIC SYSTEM Open center system, triple gear pumps, engine driven, 39 gpm @ 3650 psi. Separate oil
reservoir not shared with other systems, externally mounted to mainframe for ground level
servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, fuel,
and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 42.2 gallon fuel tank. 22 gallon
hydraulic tank with 10 micron filter. 500 hour engine oil and filter service interval. 1000 hour trans-
mission oil and 500 hour transmission filter service interval. 2000 hour hydraulic oil and 500 hour
hydraulic filter service interval. External Toolbox.
3CX 14FT BACKHOE LOADER
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
All prices and specifications subject to change without notice page 3 of 8 3CX-14FT USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA
EFFECTIVE:
JANUARY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS 3CX (2WS)
PACKAGE BUILD CODE:
Environment: CANOPY CANOPY
Dipper: FIXED EXTRADIG
SALES Drive: 4WD 4WD
CODE ITEM Horse Power: 74HP 74HP
0795 3CX-14, 4WD, CM, 74HP, MAN TRANS. MANUAL CONTROLS
200A003 CANOPY
200B61B 14 x17.5 & 19.5Lx24, R4 Industrial- GALAXY- MANUAL TRANSMISSION WITH LSD
200C710 USA ONLY - for Manual Controls - Canopy
200D314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
200E308 88" GP Bucket - fixed dipper only
200F072 Operator Manual Pack - American English
200G450 North American Legislation
200H407 Extending Dipper for CM, Manual control 14FT machines
200Y470 400 Lbs. CWT
SUGGESTED LIST PRICE $75,000 $81,823
3CX 14FT BACKHOE LOADER
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Options & Attachments Sections following.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Options & Attachments Sections following.
All prices and specifications subject to change without notice page 4 of 8 3CX-14FT USD Price Pages
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS: ESSENTIAL FEATURES:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
0794 2WD 74HP FIXED 100 lbs $58,657
0795 4WD 74HP FIXED 100 lbs $60,318
SEAT TYPE
200A003 VINYL, FIX $3,966
200A009 VINYL, FIX $11,071
200A010 VINYL, FIX $15,806
200C710 $0
200C712 $0
200W63H $0
200B60B $4,741
200B61B $6,380
200V096 $0
200V097 $0
200D200 $0
200D311 $1,123
200D312 $1,289
200D314 $1,326
200D315 $1,492
200D316 $1,812
200D317 $2,132
USA ONLY - for Manual Controls - Canopy
HEATER
HEATER & AC
CAB
NO
CAB
3CX-14, 2WD, CM, 74HP, MAN TRANS. MANUAL
3CX-14, 4WD, CM, 74HP, MAN TRANS. MANUAL
ELECTRICAL PACKAGES FOR CAB/CANOPY (E)
NOTE: Prices include AC/Heater. For AC be sure to also order the appropriate Z code.
CAB/CANOPY PACKAGES (E)
HEATER / AC
CANOPY
EFFECTIVE: JANUARY 1,
2013
DRIVEHORSE
POWERDIPPER TYPE
COUNTER
WEIGHT
GALAXY TIRE SETS - 2WD
GALAXY TIRE SETS - 4WD
3CX 14FT BACKHOE LOADER U.S. DOLLAR PRICE PAGES F.O.B. SAVANNAH, GA
11Lx16 & 19.5Lx24, R4,Industrial- GALAXY - MANUAL TRANSMISSION WITH LSD
UPGRADE - To change from fixed dipper to extending dipper , please see H codes below in Section 3- options
Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft.
EXCAVATOR BUCKETS (E) - PICK ONE, for additional buckets, please see K codes in Section 4
No Excavator Bucket
Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft.
Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft.
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
USA ONLY - for Manual Controls - Cab
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth
BACKHOE RAM SETS (E)
Standard Lift Ram set for Fixed dipper - 14 FT machines
Standard Lift Ram set for ExtraDig dipper - 14 FT machines
Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft.
14 x17.5 & 19.5Lx24, R4 Industrial- GALAXY- MANUAL TRANSMISSION WITH LSD
DRIVE CONTROLS (E)
Drive controls for 74HP Manual Transmission
TIRES ( E )
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting a code from each
E (Essential) category below. Select Options and/or Attachments from Section 3 or 4. JCB cannot normally modify existing
factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
All prices and specifications subject to change without notice page 5 of 8 3CX-14FT USD Price Pages
EFFECTIVE:
JANUARY 1, 2013
SECTION 2 - ESSENTIAL FEATURES CONTINUED.
U.S.
LIST
200E200 $0
200E250 $0
200E308 $2,468
200E309 $2,468
200E205 $6,202
200E219 $8,085
200F072 Operator Manual Pack - American English $0
200F073 Operator Manual Pack - French $0
200F075 Operator Manual Pack - Spanish $0
200G450 $0
88" GP Bucket - fixed dipper only
92" 6 IN 1 Bucket
92" 6 IN 1 Bucket with Forks
88" GP Bucket - ExtraDig dippers or hammer pipework
NORTH AMERICAN LEGISLATION (E)
North American Legislation
MANUAL PACK (E)
LOADER BUCKETS (E)
Direct Mount
No Front Loader Bucket - for fixed dipper
No Front Loader Bucket - for ExtraDig dipper
3CX 14FT
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one
code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 6 of 8 3CX-14FT USD Price Pages
EFFECTIVE:
JANUARY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
U.S.
LIST
ITEM
BACKHOE DIPPERSTICK TO CHANGE STANDARD FIXED DIPPER TO EXTENDING DIPPER
200H407 Extending Dipper for CM, Manual control 14FT machines $6,823
STABILIZER FEET
200Y418 Street Feet $150
200Y419 Flip Feet $465
COUNTERWEIGHTS
200Y428 220 Lbs. CWT (must be ordered with 2WS extending dipper or hammer) $310
200Y470 400 Lbs. CWT $542
200Y472 750 Lbs. CWT w/ Cast Insert $953
ENGINE COMPARTMENT
200Y115 Coolant Heater - Eberspacher Diesel Fueled $2,500
200X256 Engine block heater $120
OPERATOR'S AREA
200Y289 3" Seat belt $90
AIRCONDITIONING
200Z530 Air Conditioning for 74HP $0
LOADER AUXILIARY HYDRAULICS
200R270 3/8 Loader Arm Pipework for Manual controls $1,085
SMOOTH RIDE
200Y465 JCB Smooth Ride - Loader Suspension $2,082
HYDRAULIC OPTIONS
HAMMER PIPEWORK FOR 14FT MACHINES
200H432 Hammer Pipework for Manual machines with fixed dipper - 14FT $3,039
200H433 Hammer Pipework AND extending dipper for Manual Control - 14FT (do not need to order H108) $9,862
HAMMER & BI-DIRECTIONAL CIRCUITS FOR 14FT MACHINES
200L109 Hammer & Bi-Directional Circuit for Manual Controls 14' fixed dipper $5,423
200L110 Hammer & Bi-Directional Circuit for Manual Controls 14' extending dipper $5,423
HAND HELD TOOL CIRCUIT
200V227 Hydraulic Hand Held Tool Circuit for Easycontrol $2,039
3CX 14FT
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 7 of 8 3CX-14FT USD Price Pages
EFFECTIVE:
JANUARY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
U.S.
LIST
ITEM
MISCELLANEOUS ITEMS
200Y109 Stabilizer Cylinder Guards $603
200Y113 Canopy Roof (must be selected with any canopy 'A' code) $0
200Y240 Mirrors (L & R) - Exterior Rear View $222
200Y216 Front Fenders $460
200X266 Driving Lights - Mid level (mounted to cab) $273
200Y130 #N/A #N/A
200Y285 Lifting Point on backhoe bucket link $140
BOLT ON CUTTING EDGE
200P208 Bolt-on Cutting Edge for Loader Bucket - 92" $400
200P210 Bolt-on Cutting Edge for Loader Bucket - 88" $400
MECHANICAL COUPLER - Fits JCB Buckets Only
200K260 Backhoe Quick Hitch - Mechanical with Lift Point & Shackle $2,189
200K560 Pivot Pins Kit (use with quickhitch and std excavator bucket) $155
ADDITIONAL BACKHOE BUCKETS
200K311 Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft. $1,123
200K312 Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft. $1,289
200K314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth $1,326
200K315 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth $1,492
200K316 Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft. $1,812
200K317 Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft. $2,132
NOTE Up to 4 backhoe buckets may be ordered and shipped with each machine. Combined width of extra buckets, up to
3, must not exceed 72 inches. Additional buckets and attachments are located in the Dealer Fit Section of the
Backhoe Loader Price List
3CX 14FT BACKHOE LOADERU.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 8 of 8 3CX-14FT USD Price Pages
JCB BACKHOE LOADER
3CX-14 SUPERCENTERMOUNT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA EFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks operate with ignition key. Front and rear horn buttons.
Automatic backup alarm.
ENGINE 91 HP gross, turbocharged, water-cooled,4 cyl, direct injection diesel, T4i compliant engine.
Hand and foot throttle. Full flow pressure engine oil lubrication with spin-on filter cartridge.
Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil coolers.
Two stage fuel filtering system utilizing a water/sediment separator and spin-on type filter element.
Dual element air filter, dry type with cleanable outer element, replaceable inner element and under
hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear selection
with 4 forward & 4 reverse speeds.
FRONT AXLE 4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake.
Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2 wheel drive activated by
switch.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle 26' 5".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Std dipper - 14' 7", Extradig dipper - 14' 7" - 18' 6". Two lever, JCB
manual backhoe controls. Fabricated stabilizer legs with anti-drift valves.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 32".
3CX-14 SUPER BACKHOE LOADER
All prices and specifications subject to change without notice page 2 of 12 3CX-14 USD Price Pages
U.S. DOLLAR PRICE
PAGES
F.O.B. SAVANNAH,
GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT (CONT.)
ELECTRICAL SYSTEM 12 volt system with 95 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab also
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs.
HYDRAULIC SYSTEM Open center system, variable displacement pison pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 42.5 gallon fuel tank. 22 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval. 1000 hour trans-
mission oil and 500 hour transmission filter service interval. 2000 hour hydraulic oil and 500 hour
hydraulic filter service interval. External Toolbox.
3CX-14 SUPER BACKHOE LOADER
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
All prices and specifications subject to change without notice page 3 of 12 3CX-14 USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA
EFFECTIVE: MAY 1,
2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS 3CX (2WS)
PACKAGE BUILD CODE: 0597B 0608B 0710B
Environment: CAB - AC CAB - AC CAB - AC
Controls: MANUAL EASY ADV. EASY
Drive 4WD 4WD 4WD
SALES Horse Power: 91HP 91HP 91HP
CODE ITEM Dipper: ExtraDig ExtraDig ExtraDig
0797 3CX-14 SUPER, 4WD, CM, 91HP, P/SHIFT, MANUAL CONTROLS
0808 3CX-14 SUPER, 4WD, CM, 91HP, P/SHIFT, EASYCONTROL
0831 3CX-14 SUPER, 4WD, CM, 91HP, P/SHIFT, ADVANCED EASYCONTROL
200A037 CAB with Air Conditioning (MANUAL CONTROLS)
200A077 CAB with Air Conditioning (EASYCONTROL)
200A190 CAB with Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)
200B61M
200C833 USA ONLY - for Manual Controls - Cab
200C750 USA ONLY - for Easycontrol -Cab
200C786 USA ONLY for Advanced Easycontrol
200D314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
200E243 92" GP Bucket - for ExtraDig dipper or Hammer Pipework
200F072 Operator Manual Pack - American English
200F832 Operator Manual Pack - American English - for Advanced Easycontrol
200V331
200G450 North American Legislation
200H408 ExtraDig Dipper for Manual controls
200H508 ExtraDig Dipper for Easycontrol
200H308 ExtraDig Dipper for Advanced Easycontrol
200V099 Heavy Lift Ram set for ExtraDig dipper - 14 FT machines
200R621 5/8 Loader Arm Pipework for Manual controls
200R723 5/8 Loader Arm Pipework for Easycontrol
200R240 5/8 Loader Arm Pipework for Advanced Easycontrol
200W64P Drive controls for Powershift
200Y428 220 Lbs. CWT (must be ordered with 2WS extending dipper or hammer)
200P208 Bolt-on Cutting Edge for Loader Bucket - 92"
200Z541 Air Conditioning for 91HP
200Z551 Air Conditioning for 91HP & Advanced Easycontrol
200Y419 Flip Feet
SUGGESTED LIST PRICE $111,650 $115,248 $117,795
3CX-14 SUPER
BACKHOE LOADER
14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD for
91HP
Adjustment Kit - Advanced Easycontrol - for Hammer, Hammer
Bi/Directional & Loader arm pipework
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Options & Attachments Sections following.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Options & Attachments Sections following.
All prices and specifications subject to change without notice page 4 of 12 3CX-14 USD Price Pages
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS: ESSENTIAL FEATURES:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
0797 4WD MANUAL FIXED 100 lbs $76,600
0799 4WD MANUAL FIXED 100lbs $80,360
0808 4WD EASY FIXED 100 lbs $80,198
0809 4WD EASY FIXED 100 lbs $83,958
0831 4WD ADV. EASY FIXED 100 lbs $81,698
0832 4WD ADV. EASY FIXED 100 lbs $85,458
Manual Controls
200A016 CANOPY (MANUAL CONTROLS) NO $3,966
200A036 CAB (MANUAL CONTROLS) HEATER $11,071
200A037 CAB with Air Conditioning (MANUAL CONTROLS) HEATER & AC $15,806
Easycontrol
200A065 CANOPY (EASYCONTROL) NO $3,966
200A075 CAB (EASY CONTROL) HEATER $11,071
200A077 CAB with Air Conditioning (EASYCONTROL) HEATER & AC $15,806
200A093 CAB with Air Ride Seat (EASYCONTROL) HEATER $12,118
200A095 CAB with Air Conditioning & Air Ride Seat (EASYCONTROL) HEATER & AC $16,853
200A189 CAB with Air Ride Seat (ADVANCED EASYCONTROL) HEATER $12,118
200A190 CAB with Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL) HEATER & AC $16,853
U.S. DOLLAR PRICE PAGES
3CX-14 SUPER, 4WD, CM, 109HP, P/SHIFT,
MANUAL CONTROLS
DRIVE
3CX-14 SUPER, 4WD, CM, 91HP, P/SHIFT,
MANUAL CONTROLS
3CX-14 SUPER
BACKHOE LOADER
UPGRADE - To change from fixed dipper to extending dipper , please see H codes below in Section 3- options
3CX-14 SUPER, 4WD, CM, 109HP, P/SHIFT,
EASYCONTROL
EFFECTIVE: MAY 1, 2013
Advanced Easycontrol
NOTE: Prices include AC/Heater and Seat options shown. For AC be sure to also order the appropriate Z code.
CAB/CANOPY PACKAGES (E)
COUNTER
WEIGHTCONTROLS
HEATER / AC
3CX-14 SUPER, 4WD, CM, 91HP, P/SHIFT,
ADVANCED EASYCONTROL
3CX-14 SUPER, 4WD, CM, 109HP, P/SHIFT,
ADVANCED EASYCONTROL
3CX-14 SUPER, 4WD, CM, 91HP, P/SHIFT,
EASYCONTROL
DIPPER TYPE
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by
selecting a code from each E (Essential) category below. Select Options and/or Attachments from Section 3
or 4. JCB cannot normally modify existing factory inventory. Dealers should order and install items from
the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 5 of 12 3CX-14 USD Price Pages
SECTION 2 (CONTINUED) - ESSENTIAL FEATURES:
200C831 $0
200C833 $0
200C834 $325
200C835 $1,000
200C836 $1,325
Easycontrol
200C748 $0
200C750 $0
200C751 $325
200C752 $1,000
200C753 $1,325
200C786 $0
200C787 $325
200C788 $1,000
200C789 $1,325
200B61M $6,380
200B61P $6,875
200B61T $7,875
200B61V $6,875
200B61Z $7,875
200B63M $9,074
200B63P $9,569
200B63T $10,569
200B63V $9,569
200B63Z $10,569
MICHELIN TIRES
200B26M $7,485
200B26P $7,980
200B26T $8,980
200B26V $7,980
200B26Z $8,980
EFFECTIVE: MAY 1, 2013U.S. DOLLAR PRICE PAGES
USA ONLY - for Manual Controls - Canopy
COFFEE MACHINE - for Manual Controls
3CX-14 SUPER
BACKHOE LOADER
Manual Control
HEATED WINDSHIELD - for Advanced Easycontrol
Advanced Easycontrol
COFFEE MACHINE AND HEATED WINDSHIELD - for Manual Controls
COFFEE MACHINE AND HEATED WINDSHIELD - for Easycontrol
USA ONLY - for Manual Controls - Cab
USA ONLY - for Easycontrol -Canopy
COFFEE MACHINE - for Easycontrol
HEATED WINDSHIELD - for Easycontrol
USA ONLY - for Easycontrol -Cab
HEATED WINDSHIELD - for Manual Controls
340 x 18 & 440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD for 91HP
14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP
TIRES ( E )
ELECTRICAL PACKAGES FOR CAB/CANOPY (E)
COFFEE MACHINE for Advanced Easycontrol
USA ONLY for Advanced Easycontrol
14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP
12.5 x 18 & 21L x 24 Industrial- GALAXY - POWERSHIFT & LSD for 91HP
12.5 x 18 & 21L x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 91HP
12.5 x 18 & 21L x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 91HP
12.5 x 18 & 21L x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP
12.5 x 18 & 21L x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP
COFFEE MACHINE AND HEATED WINDSHIELD - for Advanced Easycontrol
340 x 18 & 440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 91HP
340 x 18 & 440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 91HP
340 x 18 & 440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 109HP
340 x 18 & 440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 109HP
GALAXY TIRES - 21L x 24
GALAXY TIRES - 19.5 x 24
14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD for 91HP
14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for 91HP
14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 91HP
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each
All prices and specifications subject to change without notice page 6 of 12 3CX-14 USD Price Pages
EFFECTIVE: MAY 1, 2013
SECTION 2 - ESSENTIAL FEATURES CONTINUED.
U.S.
LIST
200W64P Drive controls for Powershift $0
200W64F $0
200W64S $0
200V098 $0
200V099 Heavy Lift Ram set for ExtraDig dipper - 14 FT machines $0
EXCAVATOR BUCKETS (E) - PICK ONE - for additional buckets, please see K codes in Section 4
200D200 $0
200D311 $1,123
200D312 $1,289
200D314 $1,326
200D315 $1,492
200D316 $1,812
200D317 $2,132
200E200 $0
200E250 $0
200E202 $2,468
200E232 $3,024
200E243 $2,468
200E244 $3,024
200E205 $6,202
200E219 $8,085
200E233 $7,068
200E234 $8,731
200E321 $3,041
200E322 $5,569
200E323 $6,146
200E324 $8,908Toolcarrier and 92" 6 IN 1 Bucket
Toolcarrier and 96" GP Bucket
F.O.B. SAVANNAH, GA
Toolcarrier
Heavy Lift Ram set for Fixed dipper - 14 FT machines
92" GP Bucket - for ExtraDig dipper or Hammer Pipework
96" GP Bucket - for ExtraDig dipper or Hammer Pipework
Toolcarrier (Q-Fit) no Bucket
92" 6 IN 1 Bucket with Forks
Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft.
92" 6 IN 1 Bucket
92" GP Bucket - for fixed dipper
96" GP Bucket - for fixed dipper
LOADER BUCKETS (E)
Toolcarrier and 92" GP Bucket
U.S. DOLLAR
PRICE PAGES
3CX-14 SUPER
BACKHOE LOADER
96" 6 IN 1 Bucket with Forks
Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft.
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth
Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft.
96" 6 IN 1 Bucket
No Front Loader Bucket - for fixed dipper
Direct Mount
No Front Loader Bucket - for ExtraDig dipper
DRIVE CONTROLS (E)
Drive controls for Powershift & Torquelock
Drive controls for Autoshift & Torquelock
BACKHOE RAM SETS (E)
No Excavator Bucket
Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft.
All prices and specifications subject to change without notice page 7 of 12 3CX-14 USD Price Pages
SECTION 2 - ESSENTIAL FEATURES CONTINUED.
U.S.
LIST
200F072 $0
200F073 $0
200F075 $0
Advanced Easycontrol
200F832 $0
200F833 $0
200F835 $0
Adjustment Kits - Advanced Easy Control ONLY
200V330 $0
200V331 Adjustment Kit - Advanced Easycontrol - for Hammer, Hammer Bi/Directional & Loader arm pipework $0
200G450 $0
U.S. DOLLAR
PRICE PAGES
EFFECTIVE: MAY 1,
2013
3CX-14 SUPER
BACKHOE LOADERF.O.B. SAVANNAH, GA
NORTH AMERICAN LEGISLATION (E)
MANUAL PACK (E)
Operator Manual Pack - French
Operator Manual Pack - American English
North American Legislation
Adjustment Kit - Advanced Easycontrol - No additional hydrauic circuits
Operator Manual Pack - Spanish
Operator Manual Pack - American English - for Advanced Easycontrol
Operator Manual Pack - French - for Advanced Easycontrol
Operator Manual Pack - Spanish - for Advanced Easycontrol
All prices and specifications subject to change without notice page 8 of 12 3CX-14 USD Price Pages
EFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
U.S.
LIST
ITEM
BACKHOE DIPPERSTICK TO CHANGE STANDARD FIXED DIPPER TO EXTENDING DIPPER
200H408 ExtraDig Dipper for Manual controls $6,823
200H508 ExtraDig Dipper for Easycontrol $6,823
200H308 ExtraDig Dipper for Advanced Easycontrol $6,823
STABILIZER FEET
200Y418 Street Feet $150
200Y419 Flip Feet $465
COUNTERWEIGHTS
200Y428 220 Lbs. CWT (must be ordered with 2WS extending dipper or hammer) $310
200Y470 400 Lbs. CWT $542
200Y472 750 Lbs. CWT w/ Cast Insert $953
ENGINE COMPARTMENT
200Y115 Coolant Heater - Eberspacher Diesel Fueled $2,500
200X256 Engine block heater $120
OPERATOR'S AREA
200Y701 Air Suspension Seat, Cloth, Armrests, Heated for Manual controls $1,047
200Y289 3" Seat belt $90
AIRCONDITIONING
200Z541 Air Conditioning for 91HP $0
200Z542 Air Conditioning for 109HP $0
200Z551 Air Conditioning for 91HP & Advanced Easycontrol $0
200Z552 Air Conditioning for 109HP & Advanced Easycontrol $0
LOADER AUXILIARY HYDRAULICS
Manual Control
200R621 5/8 Loader Arm Pipework for Manual controls $1,073
200R623 5/8 Loader Arm Pipework with Detent for Manual controls $1,073
200R625 5/8 Loader Arm Pipework with Lever Locks for Manual controls & Coffee Machine $1,073
Easycontrol
200R723 5/8 Loader Arm Pipework for Easycontrol $1,073
200R724 5/8 Loader Arm Pipework for Easycontrol & Bi-Directional Circuit $1,073
200R726 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Coffee Machine $1,073
200R728 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Bi-Directional Circuit & Coffee Machine $1,073
Advanced Easycontrol
200R240 5/8 Loader Arm Pipework for Advanced Easycontrol $1,073
F.O.B. SAVANNAH, GA 3CX-14 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGES
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 9 of 12 3CX-14 USD Price Pages
EFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
U.S.
ITEM LIST
SMOOTH RIDE
Manual & Easycontrol Control
200Y464 JCB Smooth Ride - Loader Suspension $2,082
200Y496 JCB Smooth Ride - Loader Suspension with Hammer Bi/directional circuit $2,082
Advanced Easycontrol
200Y810 JCB Smooth Ride - Loader Suspension for Advanced Easycontrol $2,082
HEAVY LIFT LOADER
200V400 Heavy-Lift Loader Cylinders $645
HAMMER PIPEWORK
Manual Control
200H435 Hammer Pipework for Manual controls - fixed dipper $3,039
200H436 Hammer Pipework AND ExtraDig Dipper for Manual controls $9,862
Easycontrol
200H535 Hammer Pipework for Easycontrol - fixed dipper $3,039
200H536 Hammer Pipework AND ExtraDig Dipper for Easycontrol $9,862
Advanced Easycontrol
200L401 Hammer Pipework for Advanced Easycontrol - fixed dipper $3,039
200L403 Hammer Pipework for Advanced Easycontrol - ExtraDig dipper $3,039
HAMMER & BI-DIRECTIONAL CIRCUITS
Manual Control
200L340 Hammer & Bi-Directional Circuit for Manual Control 14' fixed dipper $5,423
200L341 Hammer & Bi-Directional Circuit for Manual Contol 14' ExtraDig dipper $5,423
Easycontrol
200L301 Hammer & Bi-Directional Circuit for EasyControl 14' fixed dipper $5,423
200L302 Hammer & Bi-Directional Circuit for EasyContol 14' ExtraDig dipper $5,423
Advanced Easycontrol
200L406 Hammer & Bi-Directional Circuit for Advanced EasyControl 14' fixed dipper $5,423
200L408 Hammer & Bi-Directional Circuit for Advanced EasyContol 14' ExtraDig dipper $5,423
F.O.B. SAVANNAH, GA3CX-14 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGES
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 10 of 12 3CX-14 USD Price Pages
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
U.S.
ITEM LIST
HAND HELD TOOL CIRCUIT
Manual Control
200V546 Hydraulic Hand Held Tool Circuit for Manual Control with Fixed dipper $2,039
200V547 Hydraulic Hand Held Tool Circuit for Manual Control with ExtraDig dipper $2,039
Easycontrol
200V402 Hydraulic Hand Held Tool Circuit for EasyControl with Fixed dipper $2,039
200V512 Hydraulic Hand Held Tool Circuit for EasyControl with ExtraDig dipper $2,039
Advanced Easycontrol
200V229 Hydraulic Hand Held Tool Circuit for Advanced Easycontrol $2,039
200V543 Hydraulic Hand Held Tool Circuit for Advanced Easycontrol with Hammer Bi/Directional circuit $2,039
AUXILIARY ELECTRICS
Manual Control
200X374 Auxiliary Electrics - Manual Control with Loader Toolcarrier $0
200X372 Auxiliary Electrics - Manual Control with Hammer Circuit $0
200X373 Auxiliary Electrics - Manual Control with Hammer/ Bi-directional Circuit & Cab $0
200X376 Auxiliary Electrics - Manual Control with Hammer/ Bi-directional Circuit & Canopy $0
200X371 Auxiliary Electrics - Manual Control with Hand Held Tool Circuit $0
Easycontrol
200X365 Auxiliary Electrics - Easycontrol with Loader Toolcarrier $0
200X361 Auxiliary Electrics - Easycontrol with Hammer Circuit $0
200X362 Auxiliary Electrics - Easycontrol with Hammer / Bi-directional Circuit $0
Advanced Easycontrol
200X351 Auxiliary Electrics - Advanced Easycontrol $0
200X356 Auxiliary Electrics - Advanced Easycontrol with Hammer / Bi-directional Circuit $0
200X354 Auxiliary Electrics - Advanced Easycontrol with Loader Toolcarrier $0
200X355 Auxiliary Electrics - Advanced Easycontrol with Hammer Circuit $0
3CX-14 SUPER
BACKHOE LOADERF.O.B. SAVANNAH, GA
U.S. DOLLAR PRICE
PAGESEFFECTIVE: MAY 1, 2013
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 11 of 12 3CX-14 USD Price Pages
EFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
U.S.
ITEM LIST
MISCELLANEOUS ITEMS
200Y109 Stabilizer Cylinder Guards $603
200Y113 Canopy Roof (must be selected with any canopy 'A' code) $0
200Y240 Mirrors (L & R) - Exterior Rear View $222
200Y216 Front Fenders $460
200X266 Driving Lights - Mid level (mounted to cab) $273
200Y131 Front Grill Bumpers $190
200Y285 Lifting Point on backhoe bucket link $140
BOLT ON CUTTING EDGE
200P208 Bolt-on Cutting Edge for Loader Bucket - 92" $400
200P209 Bolt-on Cutting Edge for Loader Bucket - 96" $400
Q- FIT FORKS
200P212 Pallet Forks and Frame (ITA ) 48" forks - must be ordered with a toolcarrier code $2,521
MECHANICAL EXCAVATOR QUICK COUPLER - Fits JCB Buckets Only
200K260 Backhoe Quick Hitch - Mechanical with Lift Point & Shackle $2,189
200K560 Pivot Pins Kit (use with quickhitch and std excavator bucket) $155
HYDRAULIC EXCAVATOR QUICK COUPLER - Fits JCB Buckets Only
Manual Control - EXTRDIG ONLY
200G15H Hydraulic Excavator Quickhitch with lifting shackle - Manual controls (order G511) $4,650
Easycontrol - EXTRADIG ONLY
200G25H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol (order G511) $4,650
200G26H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol with Hammer Circuit (order G511) $4,650
200G27H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol with Hammer/Bi-Di circuit (order G511) $4,650
Advanced Easycontrol - EXTRADIG ONLY
200G35K Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol (order G511) $4,650
200G35M Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with AC (order G511) $4,650
200G36K $4,650
200G36M $4,650
ALL
200G511 No Lifting Adjustments - MUST order with Hydraulic Quick Coupler $0
ADDITIONAL BACKHOE BUCKETS
200K311 Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft. $1,123
200K312 Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft. $1,289
200K314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth $1,326
200K315 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth $1,492
200K316 Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft. $1,812
200K317 Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft. $2,132
NOTEUp to 4 backhoe buckets may be ordered and shipped with each machine. Combined width of extra buckets, up to 3, must not exceed 72 inches.
Additional buckets and attachments are located in the Dealer Fit Section of the Backhoe Loader Price List
3CX-14 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with Hammer/Bi-Di circuit (order G511)
Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with Hammer/Bi-Di circuit & AC (order
G511)
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 12 of 12 3CX-14 USD Price Pages
JCB BACKHOE LOADER
3CX-15 SUPERCENTERMOUNT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
U.S. DOLLAR PRICE
PAGES
EFFECTIVE: MAY 1,
2013
STANDARD EQUIPMENT
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks operate with ignition key. Front and rear horn buttons.
Automatic backup alarm.
ENGINE 109HP gross, turbocharged, water-cooled,4 cyl, direct injection diesel, T4i compliant engine.
Hand and foot throttle. Full flow pressure engine oil lubrication with spin-on filter cartridge.
Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil coolers.
Two stage fuel filtering system utilizing a water/sediment separator and spin-on type filter element.
Dual element air filter, dry type with cleanable outer element, replaceable inner element and under
hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear selection
with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake.
Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2 wheel drive activated
by switch.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle - 26' 5".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Extradig dipper - 16' 3" - 20' 1". Easycontrol backhoe controls.
Fabricated stabilizer legs with anti-drift valves.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 32".
3CX-15 SUPER BACKHOE LOADER F.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice Page 2 of 10 3CX-15 USD Price Pages
U.S. DOLLAR PRICE
PAGES
EFFECTIVE: MAY 1,
2013
STANDARD EQUIPMENT (CONT.)
ELECTRICAL SYSTEM 12 volt system with 95 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab also
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs.
HYDRAULIC SYSTEM Open center system, variable displacement pison pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 42.5 gallon fuel tank. 22 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval. 1000 hour trans-
mission oil and 500 hour transmission filter service interval. 2000 hour hydraulic oil and 500 hour
hydraulic filter service interval. External Toolbox.
3CX-15 SUPER BACKHOE LOADER F.O.B. SAVANNAH, GA
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
All prices and specifications subject to change without notice Page 3 of 10 3CX-15 USD Price Pages
U.S. DOLLAR
PRICE PAGES
EFFECTIVE: MAY 1,
2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS 3CX (2WS)
PACKAGE BUILD CODE: 0602A 0610A
Environment: CAB - AC CAB - AC
Controls: EASY ADV. EASY
Drive: 4WD 4WD
SALES Horse Power: 109HP 109HP
CODE ITEM Dipper: ExtraDig ExtraDig
0810 3CX-15 SUPER, 4WD, CM, 109HP, P/SHIFT, EASYCONTROL
0835 3CX-15 SUPER, 4WD, CM, 109HP, P/SHIFT, ADVANCED EASYCONTROL
200A077 CAB with Air Conditioning (EASYCONTROL)
200A190 CAB with Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)
200B61V
200C750 USA ONLY - for Easycontrol -Cab
200C786 USA ONLY for Advanced Easycontrol
200D314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
200E243 92" GP Bucket - for ExtraDig dipper or Hammer Pipework
200F072 Operator Manual Pack - American English
200F832 Operator Manual Pack - American English - for Advanced Easycontrol
200V331
200G450 North American Legislation
200V107 Heavy Lift Ram set for Extending dipper - 15 FT machines
200R723 5/8 Loader Arm Pipework for Easycontrol
200R240 5/8 Loader Arm Pipework for Advanced Easycontrol
200W64F Drive controls for Powershift & Torquelock
200P208 Bolt-on Cutting Edge for Loader Bucket - 92"
200Z542 Air Conditioning for 109HP
200Z552 Air Conditioning for 109HP & Advanced Easycontrol
200Y419 Flip Feet
SUGGESTED LIST PRICE $126,421 $128,968
3CX-15 SUPER BACKHOE LOADER F.O.B. SAVANNAH, GA
14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for
109HP
Adjustment Kit - Advanced Easycontrol - for Hammer, Hammer Bi/Directional & Loader arm
pipework
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine
using the Custom Build, Options & Attachments Sections following.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine
using the Custom Build, Options & Attachments Sections following.
All prices and specifications subject to change without notice Page 4 of 10 3CX-15 USD Price Pages
F.O.B. SAVANNAH, GAEFFECTIVE: MAY 1,
2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS: ESSENTIAL FEATURES:
SALES DRIVE CONTROLSHORSE
POWERDIPPER TYPE
COUNTER
WEIGHTU.S.
CODE ITEM LIST
BASE MACHINE (E)
0810
4WD EASY 109HP EXTRADIG 400 lbs $98,008
0835
4WD ADV. EASY 109HP EXTRADIG 400 lbs $99,508
CAB/CANOPY PACKAGES (E)
HEATER / AC
200A065 NO $3,966
200A075 HEATER $11,071
200A077 CAB with Air Conditioning (EASYCONTROL) HEATER & AC $15,806
200A093 CAB with Air Ride Seat (EASYCONTROL) HEATER $12,118
200A095 CAB with Air Conditioning & Air Ride Seat (EASYCONTROL) HEATER & AC $16,853
Advanced Easycontrol
200A189 CAB with Air Ride Seat (ADVANCED EASYCONTROL) HEATER $12,118
200A190 CAB with Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL) HEATER & AC $16,853
ELECTRICAL PACKAGES FOR CAB/CANOPY (E)
Easycontrol
200C748 USA ONLY - for Easycontrol -Canopy $0
200C750 USA ONLY - for Easycontrol -Cab $0
200C751 COFFEE MACHINE - for Easycontrol $325
200C752 HEATED WINDSHIELD - for Easycontrol $1,000
200C753 COFFEE MACHINE AND HEATED WINDSHIELD - for Easycontrol $1,325
Advanced Easycontrol
200C786 USA ONLY for Advanced Easycontrol $0
200C787 COFFEE MACHINE for Advanced Easycontrol $325
200C788 HEATED WINDSHIELD - for Advanced Easycontrol $1,000
200C789 COFFEE MACHINE AND HEATED WINDSHIELD - for Advanced Easycontrol $1,325
3CX-15 SUPER, 4WD, CM, 109HP,
P/SHIFT, EASYCONTROL
3CX-15 SUPER, 4WD, CM, 109HP,
P/SHIFT, ADVANCED EASYCONTROL
3CX-15 SUPER
BACKHOE LOADERU.S. DOLLAR PRICE PAGES
CANOPY (EASYCONTROL)
CAB (EASY CONTROL)
NOTE: Prices include AC/Heater and Seat options shown. For AC be sure to also order the appropriate Z code.
Easycontrol
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements,
All prices and specifications subject to change without notice Page 5 of 10 3CX-15 USD Price Pages
SECTION 2 (CONTINUED) - ESSENTIAL FEATURES:
GALAXY TIRES - 19.5 x 24
200B61V 14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP $6,875
200B61Z 14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP $7,875
GALAXY TIRES - 21L x 24
200B63V 12.5 x 18 & 21L x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP $9,569
200B63Z 12.5 x 18 & 21L x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP $10,569
MICHELIN TIRES
200B26V 340 x 18 & 440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 109HP $7,980
200B26Z 340 x 18 & 440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 109HP $8,980
200W64F Drive controls for Powershift & Torquelock $0
200W64S Drive controls for Autoshift & Torquelock $0
200V107 $0
200D200 $0
200D311 $1,123
200D312 $1,289
200D314 $1,326
200D315 $1,492
200D316 $1,812
200D317 $2,132
Heavy Lift Ram set for Extending dipper - 15 FT machines
DRIVE CONTROLS (E)
BACKHOE RAM SETS (E)
U.S. DOLLAR PRICE PAGES
TIRES (E)
3CX-15 SUPER BACKHOE LOADER EFFECTIVE: MAY 1, 2013F.O.B. SAVANNAH, GA
Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft.
EXCAVATOR BUCKETS (E)- PICK ONE, for any additional buckets, please see K codes in Attachments section
Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft.
Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft.
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
No Excavator Bucket
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth
Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft.
All prices and specifications subject to change without notice Page 6 of 10 3CX-15 USD Price Pages
EFFECTIVE: MAY 1,
2013
SECTION 2 - ESSENTIAL FEATURES CONT.
200E250 No Front Loader Bucket - for ExtraDig dipper $0
200E243 92" GP Bucket - for ExtraDig dipper or Hammer Pipework $2,468
200E244 96" GP Bucket - for ExtraDig dipper or Hammer Pipework $3,024
200E205 92" 6 IN 1 Bucket $6,202
200E219 92" 6 IN 1 Bucket with Forks $8,085
200E233 96" 6 IN 1 Bucket $7,068
200E234 96" 6 IN 1 Bucket with Forks $8,731
Toolcarrier
200E321 Toolcarrier (Q-Fit) no Bucket $3,041
200E322 Toolcarrier and 92" GP Bucket $5,569
200E323 Toolcarrier and 96" GP Bucket $6,146
200E324 Toolcarrier and 92" 6 IN 1 Bucket $8,908
Easycontrol
200F072 Operator Manual Pack - American English $0
200F073 Operator Manual Pack - French $0
200F075 Operator Manual Pack - Spanish $0
Advanced Easycontrol
200F832 Operator Manual Pack - American English - for Advanced Easycontrol $0
200F833 Operator Manual Pack - French - for Advanced Easycontrol $0
200F835 Operator Manual Pack - Spanish - for Advanced Easycontrol $0
ADJUSTMENT KITS - Advanced Easyconrol ONLY
200V330 Adjustment Kit - Advanced Easycontrol - No additional hydrauic circuits $0
200V331 Adjustment Kit - Advanced Easycontrol - for Hammer, Hammer Bi/Directional & Loader arm pipework $0
200G450 $0
LOADER BUCKETS (E)
3CX-15 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
North American Legislation
Direct Mount
NORTH AMERICAN LEGISLATION (E)
MANUAL PACK (E)
All prices and specifications subject to change without notice Page 7 of 10 3CX-15 USD Price Pages
EFFECTIVE: MAY 1,
2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
U.S.
ITEM LIST
LOADER AUXILIARY HYDRAULICS
Easycontrol
200R723 5/8 Loader Arm Pipework for Easycontrol $1,073
200R724 5/8 Loader Arm Pipework for Easycontrol & Bi-Directional Circuit $1,073
200R726 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Coffee Machine $1,073
200R728 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Bi-Directional Circuit & Coffee Machine $1,073
Advanced Easycontrol
200R240 5/8 Loader Arm Pipework for Advanced Easycontrol $1,073
SMOOTH RIDE
200Y464 JCB Smooth Ride - Loader Suspension $2,082
200Y496 JCB Smooth Ride - Loader Suspension with Hammer Bi/directional circuit $2,082
200Y810 JCB Smooth Ride - Loader Suspension for Advanced Easycontrol $2,082
HAMMER PIPEWORK
200H540 Hammer Pipework for Easycontrol - 15' ExtraDig dipper $3,039
200L404 Hammer Pipeworkt for Advanced EasyContol 15' ExtraDig dipper $3,039
HAMMER & BI-DIRECTIONAL PIPEWORK
200L304 Hammer & Bi-Directional Circuit for EasyContol 15' ExtraDig dipper $5,423
200L308 Hammer & Bi-Directional Circuit for EasyContol 15' ExtraDig dipper & Coffee Machine $5,423
200L409 Hammer & Bi-Directional Circuit for Advanced EasyContol 15' ExtraDig dipper $5,423
HAND HELD TOOL CIRCUIT
200V548 Hydraulic Hand Held Tool Circuit for EasyControl - 15' ExtraDig dipper $2,039
200V229 Hydraulic Hand Held Tool Circuit for Advanced Easycontrol $2,039
200V543 Hydraulic Hand Held Tool Circuit for Advanced Easycontrol with Hammer Bi/Directional circuit $2,039
MISCELLANEOUS OPTIONS
200Y109 Stabilizer Cylinder Guards $603
200Y113 Canopy Roof (must be selected with any canopy 'A' code) $0
200Y240 Mirrors (L & R) - Exterior Rear View $222
200Y216 Front Fenders $460
200X266 Driving Lights - Mid level (mounted to cab) $273
200Y131 Front Grill Bumpers $190
200Y285 Lifting Point on backhoe bucket link $140
AUXILIARY ELECTRICS
Easycontrol
200X365 Auxiliary Electrics - Easycontrol with Loader Toolcarrier $0
200X361 Auxiliary Electrics - Easycontrol with Hammer Circuit $0
200X362 Auxiliary Electrics - Easycontrol with Hammer / Bi-directional Circuit $0
Advanced Easycontrol
200X351 Auxiliary Electrics - Advanced Easycontrol $0
200X356 Auxiliary Electrics - Advanced Easycontrol with Hammer / Bi-directional Circuit $0
200X354 Auxiliary Electrics - Advanced Easycontrol with Loader Toolcarrier $0
200X355 Auxiliary Electrics - Advanced Easycontrol with Hammer Circuit $0
F.O.B. SAVANNAH, GA3CX-15 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGES
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice Page 8 of 10 3CX-15 USD Price Pages
EFFECTIVE: MAY 1,
2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
U.S.
ITEM LIST
STABILIZER FEET
200Y418 Street Feet $150
200Y419 Flip Feet $465
COUNTERWEIGHTS
200Y472 750 Lbs. CWT w/ Cast Insert $953
ENGINE COMPARTMENT
200Y115 Coolant Heater - Eberspacher Diesel Fueled $2,500
200X256 Engine block heater $120
OPERATOR'S AREA
200Y289 3" Seat belt $90
AIR CONDITIONING
200Z542 Air Conditioning for 109HP $0
200Z552 Air Conditioning for 109HP & Advanced Easycontrol $0
3CX-15 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice Page 9 of 10 3CX-15 USD Price Pages
EFFECTIVE: MAY 1,
2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
U.S.
ITEM LIST
BOLT ON CUTTING EDGE
200P208 Bolt-on Cutting Edge for Loader Bucket - 92" $400
200P209 Bolt-on Cutting Edge for Loader Bucket - 96" $400
Q- FIT FORKS
200P212 Pallet Forks and Frame (ITA ) 48" forks - must be ordered with a toolcarrier code $2,521
MECHANICAL EXCAVATOR QUICK COUPLER - Fits JCB Buckets Only
200K260 Backhoe Quick Hitch - Mechanical with Lift Point & Shackle $2,189
200K560 Pivot Pins Kit (use with quickhitch and std excavator bucket) $155
HYDRAULIC EXCAVATOR QUICK COUPLER - Fits JCB Buckets Only
Easycontrol
200G25H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol (order G511) $4,650
200G26H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol with Hammer Circuit (order G511) $4,650
200G27H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol with Hammer/Bi-Di circuit (order G511) $4,650
Advanced Easycontrol
200G35K Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol (order G511) $4,650
200G35M Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with AC (order G511) $4,650
200G36K $4,650
200G36M $4,650
Easycontrol & Advanced Easycontrol
200G511 No Lifting Adjustments - MUST order with Hydraulic Quick Coupler $0
200K560 Pivot Pins Kit (use with quickhitch and std excavator bucket) $155
ADDITIONAL BACKHOE BUCKETS
200K311 Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft. $1,123
200K312 Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft. $1,289
200K314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth $1,326
200K315 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth $1,492
200K316 Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft. $1,812
200K317 Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft. $2,132
Up to 4 backhoe buckets may be ordered and shipped with each machine. Combined width of extra buckets, up to 3, must not
exceed 72 inches. Additional buckets and attachments are located in the Dealer Fit Section of the Backhoe Loader Price List
3CX-15 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with Hammer/Bi-Di circuit (order
G511)
Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with Hammer/Bi-Di circuit & AC
(order G511)
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice Page 10 of 10 3CX-15 USD Price Pages
JCB BACKHOE LOADER
3CX-17 SUPER CENTERMOUNT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
U.S. DOLLAR PRICE
PAGES
EFFECTIVE: MAY 1,
2013
STANDARD EQUIPMENT
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks operate with ignition key. Front and rear horn buttons.
Automatic backup alarm.
ENGINE 109HP gross, turbocharged, water-cooled,4 cyl, direct injection diesel, T4i compliant engine.
Hand and foot throttle. Full flow pressure engine oil lubrication with spin-on filter cartridge.
Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil coolers.
Two stage fuel filtering system utilizing a water/sediment separator and spin-on type filter element.
Dual element air filter, dry type with cleanable outer element, replaceable inner element and under
hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear
selection with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake.
Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2 wheel drive
activatedby switch.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle 4WD - 26' 5".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Extradig dipper - 17' 7" - 21' 6". Easycontrol backhoe controls.
Fabricated stabilizer legs with anti-drift valves.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 32".
3CX-17 SUPER BACKHOE LOADER F.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice Page 2 of 9 3CX-17 USD Prices Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA EFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT (CONT.)
ELECTRICAL SYSTEM 12 volt system with 95 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab also
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs.
HYDRAULIC SYSTEM Open center system, variable displacement pison pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshieldAND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 42.5 gallon fuel tank. 22 gallon
hydraulic tank with 10 micron filter. 500 hour engine oil and filter service interval. 1000 hour trans-
mission oil and 500 hour transmission filter service interval. 2000 hour hydraulic oil and 500 hour
hydraulic filter service interval. External Toolbox.
3CX-17 SUPER BACKHOE LOADER
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
All prices and specifications subject to change without notice Page 3 of 9 3CX-17 USD Prices Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS 3CX (2WS)
PACKAGE BUILD CODE: 0611A 0611B
Environment: CAB - AC CAB - AC
Controls: EASY ADV. EASY
Drive: 4WD 4WD
SALES Horse Power: 109HP 109HP
CODE ITEM Dipper: ExtraDig ExtraDig
0811 3CX-17 SUPER, 4WD, CM, 109HP, P/SHIFT, EASYCONTROL
0836 3CX-17 SUPER, 4WD, CM, 109HP, P/SHIFT, ADVANCED EASYCONTROL
200A077 CAB with Air Conditioning (EASYCONTROL)
200A190 CAB with Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)
200B61V 14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP
200C748 USA ONLY - for Easycontrol -Canopy
200C786 USA ONLY for Advanced Easycontrol
200D314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
200E243 92" GP Bucket - for ExtraDig dipper or Hammer Pipework
200F072 Operator Manual Pack - American English
200F832 Operator Manual Pack - American English - for Advanced Easycontrol
200V331 Adjustment Kit - Advanced Easycontrol - for Hammer, Hammer Bi/Directional & Loader arm pipework
200G450 North American Legislation
200R744 5/8 Loader Arm Pipework for Easycontrol & Bi-Directional Circuit
200R239 5/8 Loader Arm Pipework for Advanced Easycontrol
200W64F Drive controls for Powershift & Torquelock
200Y419 Flip Feet
200P208 Bolt-on Cutting Edge for Loader Bucket - 92"
200Z542 Air Conditioning for 109HP
200Z552 Air Conditioning for 109HP & Advanced Easycontrol
SUGGESTED LIST PRICE $162,793 $165,340
EFFECTIVE: MAY 1, 20133CX 17FT BACKHOE LOADER
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Options & Attachments Sections following.
All prices and specifications subject to change without notice Page 4 of 9 3CX-17 USD Prices Pages
F.O.B. SAVANNAH, GAEFFECTIVE: MAY 1,
2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS: ESSENTIAL FEATURES:
SALES DRIVE CONTROLSHORSE
POWERDIPPER TYPE
COUNTER
WEIGHTU.S.
CODE ITEM LIST
BASE MACHINE (E)
0811
4WD EASY 109HP EXTRADIG 750 lbs $134,380
0836
4WD ADV. EASY 109HP EXTRADIG 750 lbs $135,880
CAB/CANOPY PACKAGES (E)
HEATER / AC
200A065 CANOPY (EASYCONTROL) NO $3,966
200A075 CAB (EASY CONTROL) HEATER $11,071
200A077 CAB with Air Conditioning (EASYCONTROL) HEATER & AC $15,806
200A093 CAB with Air Ride Seat (EASYCONTROL) HEATER $12,118
200A095 CAB with Air Conditioning & Air Ride Seat (EASYCONTROL) HEATER & AC $16,853
Advanced Easycontrol
200A189 CAB with Air Ride Seat (ADVANCED EASYCONTROL) HEATER $12,118
200A190 CAB with Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL) HEATER & AC $16,853
ELECTRICAL PACKAGES FOR CAB/CANOPY (E)
Easycontrol
200C748 USA ONLY - for Easycontrol -Canopy $0
200C750 USA ONLY - for Easycontrol -Cab $0
200C751 COFFEE MACHINE - for Easycontrol $325
200C752 HEATED WINDSHIELD - for Easycontrol $1,000
200C753 COFFEE MACHINE AND HEATED WINDSHIELD - for Easycontrol $1,325
Advanced Easycontrol
200C786 USA ONLY for Advanced Easycontrol $0
200C787 COFFEE MACHINE for Advanced Easycontrol $325
200C788 HEATED WINDSHIELD - for Advanced Easycontrol $1,000
200C789 COFFEE MACHINE AND HEATED WINDSHIELD - for Advanced Easycontrol $1,325
3CX-17 SUPER, 4WD, CM, 109HP,
P/SHIFT, EASYCONTROL
3CX-17 SUPER
BACKHOE U.S. DOLLAR PRICE PAGES
3CX-17 SUPER, 4WD, CM, 109HP, P/SHIFT,
ADVANCED EASYCONTROL
NOTE: Prices include AC/Heater and Seat options shown. For AC be sure to also order the appropriate Z code.
Easycontrol
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your
If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your
If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your
If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your
All prices and specifications subject to change without notice Page 5 of 9 3CX-17 USD Prices Pages
SECTION 2 (CONTINUED) - ESSENTIAL FEATURES:
GALAXY TIRES - 19.5 x 24
200B61V 14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP $6,875
200B61Z 14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP $7,875
GALAXY TIRES - 21L x 24
200B63V 12.5 x 18 & 21L x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP $9,569
200B63Z 12.5 x 18 & 21L x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP $10,569
MICHELIN TIRES
200B26V 340 x 18 & 440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 109HP $7,980
200B26Z 340 x 18 & 440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 109HP $8,980
200W64F $0
200W64S Drive controls for Autoshift & Torquelock $0
200D200 No Excavator Bucket $0
200D311 $1,123
200D312 $1,289
200D314 $1,326
200D315 $1,492
200D316 $1,812
200D317 $2,132
Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft.
Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft.
EXCAVATOR BUCKETS (E)- PICK ONE, for any additional buckets, please see K codes in Attachments
Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft.
Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft.
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
EFFECTIVE: MAY 1, 2013
Drive controls for Powershift & Torquelock
F.O.B. SAVANNAH, GA
AXLES AND TRANSMISSIONS (E)
TIRES ( E )
U.S. DOLLAR PRICE PAGES
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth
3CX-17 SUPER BACKHOE
LOADER
All prices and specifications subject to change without notice Page 6 of 9 3CX-17 USD Prices Pages
EFFECTIVE: MAY 1,
2013
SECTION 2 - ESSENTIAL FEATURES CONT.
U.S.
LIST
200E250 No Front Loader Bucket - for ExtraDig dipper $0
200E243 92" GP Bucket - for ExtraDig dipper or Hammer Pipework $2,468
200E244 96" GP Bucket - for ExtraDig dipper or Hammer Pipework $3,024
200E205 92" 6 IN 1 Bucket $6,202
200E219 92" 6 IN 1 Bucket with Forks $8,085
200E233 96" 6 IN 1 Bucket $7,068
200E234 96" 6 IN 1 Bucket with Forks $8,731
Toolcarrier
200E321 Toolcarrier (Q-Fit) no Bucket $3,041
200E322 Toolcarrier and 92" GP Bucket $5,569
200E323 Toolcarrier and 96" GP Bucket $6,146
200E324 Toolcarrier and 92" 6 IN 1 Bucket $8,908
200P212 Pallet Forks and Frame (ITA ) 48" forks - must be ordered with a toolcarrier code $2,521
MANUAL PACK (E)
Easycontrol
200F072 Operator Manual Pack - American English $0
200F073 Operator Manual Pack - French $0
200F075 Operator Manual Pack - Spanish $0
Advanced Easycontrol
200F832 Operator Manual Pack - American English - for Advanced Easycontrol $0
200F833 Operator Manual Pack - French - for Advanced Easycontrol $0
200F835 Operator Manual Pack - Spanish - for Advanced Easycontrol $0
ADJUSTMENT KITS - Advanced Easyconrol ONLY
200V330 Adjustment Kit - Advanced Easycontrol - No additional hydrauic circuits $0
200V331 Adjustment Kit - Advanced Easycontrol - for Hammer, Hammer Bi/Directional & Loader arm pipework $0
NORTH AMERICAN LEGISLATION (E)
200G450 North American Legislation $0
F.O.B. SAVANNAH, GA
Direct Mount
LOADER BUCKETS (E)
3CX-17 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGES
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice Page 7 of 9 3CX-17 USD Prices Pages
3CX-17 SUPER
BACKHOE LOADER
EFFECTIVE: MAY 1,
2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:U.S.
ITEM LIST
STABILIZER FEET
200Y418 Street Feet $150
200Y419 Flip Feet $465
ENGINE COMPARTMENT
200X256 Engine block heater $120
200Y115 Coolant Heater - Eberspacher Diesel Fueled $2,500
OPERATOR'S AREA
200Y289 3" Seat belt $90
AIR CONDITIONING
200Z542 Air Conditioning for 109HP $0
200Z552 Air Conditioning for 109HP & Advanced Easycontrol $0
LOADER AUXILIARY HYDRAULICS
Easycontrol
200R743 5/8 Loader Arm Pipework for Easycontrol $1,073
200R744 5/8 Loader Arm Pipework for Easycontrol & Bi-Directional Circuit $1,073
200R746 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Coffee Machine $1,073
200R748 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Bi-Directional Circuit & Coffee Machine $1,073
Advanced Easycontrol
200R239 5/8 Loader Arm Pipework for Advanced Easycontrol $1,073
SMOOTH RIDE
200Y464 JCB Smooth Ride - Loader Suspension $2,082
200Y496 JCB Smooth Ride - Loader Suspension with Hammer Bi/directional circuit $2,082
200Y810 JCB Smooth Ride - Loader Suspension for Advanced Easycontrol $2,082
HYDRAULIC OPTIONS
HAMMER PIPEWORK NOT AVAILABLE ON 17FT MACHINES
BI- DIRECTIONAL CIRCUITS NOT AVAILABLE ON 17FT MACHINES
HAND HELD TOOL CIRCUIT
200V548 Hydraulic Hand Held Tool Circuit for EasyControl - 15' ExtraDig dipper $2,039
200V229 Hydraulic Hand Held Tool Circuit for Advanced Easycontrol $2,039
200V543 Hydraulic Hand Held Tool Circuit for Advanced Easycontrol with Hammer Bi/Directional circuit $2,039
MISCELLANEOUS OPTIONS
200Y109 Stabilizer Cylinder Guards $603
200Y113 Canopy Roof (must be selected with any canopy 'A' code) $0
200Y240 Mirrors (L & R) - Exterior Rear View $222
200Y216 Front Fenders $460
200X266 Driving Lights - Mid level (mounted to cab) $273
200Y131 Front Grill Bumpers $190
200Y285 Lifting Point on backhoe bucket link $140
AUXILIARY ELECTRICS
Easycontrol
200X365 Auxiliary Electrics - Easycontrol with Loader Toolcarrier $0
200X361 Auxiliary Electrics - Easycontrol with Hammer Circuit $0
200X362 Auxiliary Electrics - Easycontrol with Hammer / Bi-directional Circuit $0
Advanced Easycontrol
200X351 Auxiliary Electrics - Advanced Easycontrol $0
200X356 Auxiliary Electrics - Advanced Easycontrol with Hammer / Bi-directional Circuit $0
200X354 Auxiliary Electrics - Advanced Easycontrol with Loader Toolcarrier $0
200X355 Auxiliary Electrics - Advanced Easycontrol with Hammer Circuit $0
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice Page 8 of 9 3CX-17 USD Prices Pages
EFFECTIVE: MAY 1,
2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
U.S.
ITEM LIST
BOLT ON CUTTING EDGE
200P208 Bolt-on Cutting Edge for Loader Bucket - 92" $400
200P209 Bolt-on Cutting Edge for Loader Bucket - 96" $400
Q- FIT FORKS
200P212 Pallet Forks and Frame (ITA ) 48" forks - must be ordered with a toolcarrier code $2,521
MECHANICAL COUPLER - Fits JCB Buckets Only
200K260 Backhoe Quick Hitch - Mechanical with Lift Point & Shackle $2,189
200K560 Pivot Pins Kit (use with quickhitch and std excavator bucket) $155
ADDITIONAL BACKHOE BUCKETS
200K311 Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft. $1,123
200K312 Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft. $1,289
200K314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth $1,326
200K315 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth $1,492
200K316 Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft. $1,812
200K317 Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft. $2,132
Up to 4 backhoe buckets may be ordered and shipped with each machine. Combined width of extra buckets, up to 3, must not
exceed 72 inches. Additional buckets and attachments are located in the Dealer Fit Section of the Backhoe Loader Price List
3CX 17FT SUPER BACKHOE
LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice Page 9 of 9 3CX-17 USD Prices Pages
JCB BACKHOE LOADER
4CX-14 SUPER
CENTERMOUNT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
All prices and specifications subject to change without notice page 1 of 10 4CX-14FT USD Price Page
U.S. DOLLAR PRICE
PAGES
EFFECTIVE: MAY 1,
2013
STANDARD EQUIPMENT
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks operate with ignition key. Front and rear horn buttons.
Automatic backup alarm.
ENGINE 109HP gross, turbocharged, water-cooled,4 cyl, direct injection diesel, T4i compliant engine.
Hand and foot throttle. Full flow pressure engine oil lubrication with spin-on filter cartridge.
Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil coolers.
Two stage fuel filtering system utilizing a water/sediment separator and spin-on type filter element.
Dual element air filter, dry type with cleanable outer element, replaceable inner element and under
hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers.
Powershift gear selection with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WS - Industrial duty 4WD Limited Slip Differential, outboard planetary reduction,
4WD shift-on-the-go.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing. Steering axle with 3
modes - 2WS, 4WS, and "crab" steer.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake.
Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2WD activated by switch.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle 4WS - 30'2".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Std dipper - 14' 7", Extradig dipper - 14' 7" - 18' 6". Two lever, JCB (SAE)
backhoe controls. Fabricated stabilizer legs with anti-drift valves. Front fenders standard
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 8' 10"
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 34".
Heavy Lift loader arms standard
4CX-14 SUPER
BACKHOE LOADERF.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice page 2 of 10 4CX-14FT USD Price Page
U.S. DOLLAR PRICE
PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: MAY 1,
2013
STANDARD EQUIPMENT (CONT.)
ELECTRICAL SYSTEM 12 volt system with 95 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab also
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs.
HYDRAULIC SYSTEM Open center system, variable displacement pison pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 42.5 gallon fuel tank. 22 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval. 1000 hour trans-
mission oil and 500 hour transmission filter service interval. 2000 hour hydraulic oil and 500 hour
hydraulic filter service interval. External Toolbox.
4CX-14 SUPER
BACKHOE LOADER
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
All prices and specifications subject to change without notice page 3 of 10 4CX-14FT USD Price Page
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA
EFFECTIVE: MAY 1,
2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS 4CX (4WS)
PACKAGE BUILD CODE: 0604A 0612A
Environment: CAB CAB
Controls: EASY ADV. EASY
Gearbox: Powershift Powershift
Dig Depth: 14FT 14FT
SALES Horse Power: 109HP 109HP
CODE ITEM 4wd-XDIG 4wd-XDIG
0812 4CX-14 SUPER, 4WD, CM, 109HP, P/SHIFT, EASYCONTROL
0837 4CX-14 SUPER, 4WD, CM, 109HP, P/SHIFT, ADVANCED EASYCONTROL
200A086 CAB with Air Conditioning (EASYCONTROL)
200A197 CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)
200B64Q 16.9 x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP
200C750 USA ONLY - for Easycontrol -Cab
200C786 USA ONLY for Advanced Easycontrol
200D314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
200E244 96" GP Bucket - for ExtraDig dipper or Hammer Pipework
200F072 Operator Manual Pack - American English
200F832 Operator Manual Pack - American English - for Advanced Easycontrol
200G450 North American Legislation
200H508 ExtraDig Dipper for Easycontrol
200H308 ExtraDig Dipper for Advanced Easycontrol
200V099 Heavy Lift Ram set for ExtraDig dipper - 14 FT machines
200R743 5/8 Loader Arm Pipework for Easycontrol
200R239 5/8 Loader Arm Pipework for Advanced Easycontrol
200W84F Drive controls for Powershift & Torquelock
200Y428 220 Lbs. CWT (must be ordered with 2WS extending dipper or hammer)
200P209 Bolt-on Cutting Edge for Loader Bucket - 96"
200Z547 Air Conditioning for 109HP
200Z557 Air Conditioning for 109HP & Advanced Easycontrol
SUGGESTED LIST PRICE $130,641 $133,188
4CX-14 SUPER
BACKHOE LOADER
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Options & Attachments Sections following.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Options & Attachments Sections following.
All prices and specifications subject to change without notice page 4 of 10 4CX-14FT USD Price Page
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS: ESSENTIAL FEATURES:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
0812 4WD EASY 109HP FIXED 100 lbs 95,972
0837 4WD ADV. EASY 109HP FIXED 100 lbs 97,472
200A070 $3,966
200A084 $11,071
200A086 $15,806
200A102 $12,118
200A104 $16,853
200A196 $12,118
200A197 $16,853
NOTE: Prices include AC/Heater and Seat options shown. For AC be sure to also order the appropriate Z code.
CAB/CANOPY PACKAGES (E)
Advanced Easycontrol
U.S. DOLLAR PRICE PAGES 4CX-14 SUPER
BACKHOE LOADERF.O.B. SAVANNAH, GA
DIPPER TYPECOUNTER
WEIGHT
4CX-14 SUPER, 4WD, CM, 109HP, P/SHIFT,
EASYCONTROL
4CX-14 SUPER, 4WD, CM, 109HP, P/SHIFT,
ADVANCED EASYCONTROL
CAB with Air Conditioning (EASYCONTROL)
CAB with Air Ride Seat (EASYCONTROL)
CAB With Air Conditioning & Air Ride Seat (EASYCONTROL)
CAB with Air Ride Seat (ADVANCED EASYCONTROL)
Easycontrol
EFFECTIVE: MAY 1, 2013
CONTROLSHORSE
POWERDRIVE
CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)
NO
HEATER
HEATER & AC
HEATER
HEATER & AC
HEATER
HEATER & AC
CANOPY (EASYCONTROL)
CAB (EASYCONTROL)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting a code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4. JCB cannot normally modify existing factory
inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 5 of 10 4CX-14FT USD Price Page
SECTION 2 (CONTINUED) - ESSENTIAL FEATURES:
200C748 $0
200C750 $0
200C751 $325
200C754 $1,000
200C755 $1,325
200C786 $0
200C787 $325
200C790 $1,000
200C791 $1,325
DRIVE CONTROLS (E)
200W84F $0
200W84S $0
200V098 Heavy Lift Ram set for Fixed dipper - 14 FT machines $0
200V099 $0
200B64Q $5,907
200B64W $7,402
200B29Q $7,857
200B29W $9,352
200D200 $0
200D311 $1,123
200D312 $1,289
200D314 $1,326
200D315 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth $1,492
200D316 Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft. $1,812
200D317 $2,132
USA ONLY - for Easycontrol -Canopy
COFFEE MACHINE AND HEATED WINDSHIELD - for Easycontrol
COFFEE MACHINE AND HEATED WINDSHIELD for Advanced Easycontrol
16.9 x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP
16.9 x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP
440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 109HP
TIRES ( E )
Drive controls for Powershift & Torquelock
USA ONLY - for Easycontrol -Cab
Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft.
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
GALAXY TIRE SETS
Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft.
MICHELIN TIRE SETS
No Excavator Bucket
EXCAVATOR BUCKETS (E)- PICK ONE, for any additional buckets, please see K codes in Attachments section
440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 109HP
Easycontrols
BACKHOE RAM SETS (E)
Drive controls for Autoshift & Torquelock
F.O.B. SAVANNAH, GA EFFECTIVE: MAY 1, 2013 4CX-14 SUPER
BACKHOE LOADER
COFFEE MACHINE - for Easycontrol
U.S. DOLLAR PRICE PAGES
Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft.
Heavy Lift Ram set for ExtraDig dipper - 14 FT machines
ELECTRICAL PACKAGES FOR CAB/CANOPY (E)
HEATED WINDSHIELD - for Easycontrol
Advanced Easycontrol
USA ONLY for Advanced Easycontrol
COFFEE MACHINE for Advanced Easycontrol
HEATED WINDSHIELD for Advanced Easycontrol
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
All prices and specifications subject to change without notice page 6 of 10 4CX-14FT USD Price Page
EFFECTIVE: MAY 1,
2013
SECTION 2 - ESSENTIAL FEATURES CONTINUED.
U.S.
LIST
200E200 $0
200E202 $2,468
200E205 $6,202
200E232 $3,024
200E233 $7,068
200E234 $8,731
200E243 $2,468
200E244 $3,024
200E250 $0
200E321 $3,041
200E322 $5,569
200E323 $6,146
200E324 $8,908
200P212 Pallet Forks and Frame (ITA ) 48" forks - must be ordered with a toolcarrier code $2,521
Easycontrol
200F072 $0
200F073 $0
200F075 $0
200F832 $0
200F833 $0
200F835 $0
200G450 $0
F.O.B. SAVANNAH, GA
LOADER BUCKETS (E)
U.S. DOLLAR
PRICE PAGES
4CX-14 SUPER
BACKHOE LOADER
Toolcarrier and 96" GP Bucket
No Front Loader Bucket - for ExtraDig dipper
92" GP Bucket - for ExtraDig dipper or Hammer Pipework
No Front Loader Bucket - for fixed dipper
92" 6 IN 1 Bucket
Operator Manual Pack - American English - for Advanced Easycontrol
Operator Manual Pack - American English
96" GP Bucket - for ExtraDig dipper or Hammer Pipework
Operator Manual Pack - Spanish
Advanced Easycontrol
96" 6 IN 1 Bucket
96" 6 IN 1 Bucket with Forks
96" GP Bucket - for fixed dipper
North American Legislation
Toolcarrier and 92" 6 IN 1 Bucket
Toolcarrier (Q-Fit) no Bucket
Toolcarrier
NORTH AMERICAN LEGISLATION (E)
Operator Manual Pack - French - for Advanced Easycontrol
Operator Manual Pack - French
MANUAL PACK (E)
Operator Manual Pack - Spanish - for Advanced Easycontrol
Toolcarrier and 92" GP Bucket
92" GP Bucket - for fixed dipper
Direct Mount
All prices and specifications subject to change without notice page 7 of 10 4CX-14FT USD Price Page
EFFECTIVE: MAY 1,
2013
I'
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
U.S.
LIST
ITEM
BACKHOE DIPPERSTICK TO CHANGE STANDARD FIXED DIPPER TO EXTENDING DIPPER
Easycontrol
200H508 ExtraDig Dipper for Easycontrol $6,823
Advanced Easycontrol
200H308 ExtraDig Dipper for Advanced Easycontrol $6,823
STABILIZER FEET
200Y418 Street Feet $150
200Y419 Flip Feet $465
COUNTERWEIGHTS
200Y428 220 Lbs. CWT (must be ordered with 2WS extending dipper or hammer) $310
200Y471 400 Lbs. CWT $542
200Y476 560 Lbs. CWT w/ Cast Insert (4WS builds only) $645
ENGINE COMPARTMENT
200X256 Engine block heater $120
200Y115 Coolant Heater - Eberspacher Diesel Fueled $2,500
OPERATOR'S AREA
200Y289 3" Seat belt $90
AIR CONDITIONING
200Z547 Air Conditioning for 109HP $0
200Z557 Air Conditioning for 109HP & Advanced Easycontrol $0
LOADER AUXILIARY HYDRAULICS
Easycontrol
200R743 5/8 Loader Arm Pipework for Easycontrol $1,073
200R744 5/8 Loader Arm Pipework for Easycontrol & Bi-Directional Circuit $1,073
200R746 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Coffee Machine $1,073
200R748 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Bi-Directional Circuit & Coffee Machine $1,073
200R239 $1,0735/8 Loader Arm Pipework for Advanced Easycontrol
Advanced Easycontrol
F.O.B. SAVANNAH, GA 4CX-14 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGES
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 8 of 10 4CX-14FT USD Price Page
EFFECTIVE: MAY 1,
2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
U.S.
LIST
ITEM
SMOOTH RIDE
Easycontrol
200Y464 JCB Smooth Ride - Loader Suspension $2,082
Advanced Easycontrol
200Y810 JCB Smooth Ride - Loader Suspension for Advanced Easycontrol $2,082
HAMMER PIPEWORK
200H535 Hammer Pipework for Easycontrol - fixed dipper $3,039
200H536 Hammer Pipework AND ExtraDig Dipper for Easycontrol $9,862
HAMMER & BI-DIRECTIONAL CIRCUITS
Easycontrol
200L301 Hammer & Bi-Directional Circuit for EasyControl 14' fixed dipper $5,423
200L302 Hammer & Bi-Directional Circuit for EasyContol 14' ExtraDig dipper $5,423
200L306 Hammer & Bi-Directional Circuit for EasyContol 14' ExtraDig dipper & Coffee Machine $5,423
Advanced Easycontrol
200L401 Hammer Pipework for Advanced Easycontrol - fixed dipper $3,039
200L403 Hammer Pipework for Advanced Easycontrol - ExtraDig dipper $3,039
200L406 Hammer & Bi-Directional Circuit for Advanced EasyControl 14' fixed dipper $5,423
200L408 Hammer & Bi-Directional Circuit for Advanced EasyContol 14' ExtraDig dipper $5,423
MISCELLANEOUS OPTIONS
200Y109 Stabilizer Cylinder Guards $603
200Y113 Canopy Roof (must be selected with any canopy 'A' code) $0
200Y240 Mirrors (L & R) - Exterior Rear View $222
200X266 Driving Lights - Mid level (mounted to cab) $273
200Y285 Lifting Point on backhoe bucket link $140
F.O.B. SAVANNAH, GA 4CX-14 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGES
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 9 of 10 4CX-14FT USD Price Page
EFFECTIVE: MAY 1,
2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
U.S.
LIST
ITEM
BOLT ON CUTTING EDGE
200P208 Bolt-on Cutting Edge for Loader Bucket - 92" $400
200P209 Bolt-on Cutting Edge for Loader Bucket - 96" $400
Q- FIT FORKS
200P212 Pallet Forks and Frame (ITA ) 48" forks - must be ordered with a toolcarrier code $2,521
MECHANICAL COUPLER - Fits JCB Buckets Only
200K260 Backhoe Quick Hitch - Mechanical with Lift Point & Shackle $2,189
200K560 Pivot Pins Kit (use with quickhitch and std excavator bucket) $155
ADDITIONAL BACKHOE BUCKETS
200K311 Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft. $1,123
200K312 Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft. $1,289
200K314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth $1,326
200K315 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth $1,492
200K316 Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft. $1,812
200K317 Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft. $2,132
Up to 4 backhoe buckets may be ordered and shipped with each machine. Combined width of extra buckets, up to 3, must not exceed
72 inches. Additional buckets and attachments are located in the Dealer Fit Section of the Backhoe Loader Price List
4CX-14 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 10 of 10 4CX-14FT USD Price Page
JCB BACKHOE LOADER
4CX-15 SUPER
CENTERMOUNT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
U.S. DOLLAR PRICE
PAGES
EFFECTIVE: MAY 1,
2013
STANDARD EQUIPMENT
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks operate with ignition key. Front and rear horn buttons.
Automatic backup alarm.
ENGINE 109HP gross, turbocharged, water-cooled,4 cyl, direct injection diesel, T4i compliant engine.
Hand and foot throttle. Full flow pressure engine oil lubrication with spin-on filter cartridge.
Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil coolers.
Two stage fuel filtering system utilizing a water/sediment separator and spin-on type filter element.
Dual element air filter, dry type with cleanable outer element, replaceable inner element and under
hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers.
Powershift gear selection with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WS - Industrial duty 4WD Limited Slip Differential; outboard planetary reduction,
4WD shift-on-the-go.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing. Steering axle with 3
modes - 2WS, 4WS, and "crab" steer.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake.
Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2WD activated by switch.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle 4WS - 30'2".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Extradig dipper - 16' 3" - 20' 1". Two lever, JCB (SAE)
backhoe controls. Fabricated stabilizer legs with anti-drift valves. Front fenders standard
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 8' 10"
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 34".
Heavy Lift Loader arms standard
4CX-15 SUPER
BACKHOE LOADERF.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice Page 2 of 10 4CX-15 USD Price Pages
U.S. DOLLAR PRICE
PAGES
EFFECTIVE: MAY 1,
2013
STANDARD EQUIPMENT (CONT.)
ELECTRICAL SYSTEM 12 volt system with 95 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab also
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs.
HYDRAULIC SYSTEM Open center system, variable displacement pison pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 42.5 gallon fuel tank. 22 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval. 1000 hour trans-
mission oil and 500 hour transmission filter service interval. 2000 hour hydraulic oil and 500 hour
hydraulic filter service interval. External Toolbox.
4CX-15 SUPER
BACKHOE LOADERF.O.B. SAVANNAH, GA
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
All prices and specifications subject to change without notice Page 3 of 10 4CX-15 USD Price Pages
U.S. DOLLAR
PRICE PAGES
EFFECTIVE: MAY 1,
2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS 4CX (4WS)
PACKAGE BUILD CODE: 0605A 0613A
Environment: CAB CAB
Controls: EASY ADV. EASY
Gearbox: Powershift Powershift
Dig Depth: 15FT 15FT
SALES Horse Power: 109HP 109HP
CODE ITEM 4wd-XDIG 4wd-XDIG
0813 4CX-15 SUPER, 4WD, CM, 109HP, P/SHIFT, EASYCONTROL
0838 4CX-15 SUPER, 4WD, CM, 109HP, P/SHIFT, ADVANCED EASYCONTROL
200A086 CAB with Air Conditioning (EASYCONTROL)
200A197 CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)
200B64Q 16.9 x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP
200C750 USA ONLY - for Easycontrol -Cab
200C786 USA ONLY for Advanced Easycontrol
200D314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
200E244 96" GP Bucket - for ExtraDig dipper or Hammer Pipework
200F072 Operator Manual Pack - American English
200F832 Operator Manual Pack - American English - for Advanced Easycontrol
200G450 North American Legislation
200V107 Heavy Lift Ram set for Extending dipper - 15 FT machines
200R743 5/8 Loader Arm Pipework for Easycontrol
200R239 5/8 Loader Arm Pipework for Advanced Easycontrol
200W84F Drive controls for Powershift & Torquelock
200P209 Bolt-on Cutting Edge for Loader Bucket - 96"
200Z547 Air Conditioning for 109HP
200Z557 Air Conditioning for 109HP & Advanced Easycontrol
SUGGESTED LIST PRICE $140,685 $143,232
4CX-15 SUPER BACKHOE
LOADERF.O.B. SAVANNAH, GA
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Options & Attachments Sections following.
All prices and specifications subject to change without notice Page 4 of 10 4CX-15 USD Price Pages
F.O.B. SAVANNAH,
GA
EFFECTIVE: MAY 1,
2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS: ESSENTIAL FEATURES:
SALES DRIVE CONTROLSHORSE
POWERDIPPER TYPE
COUNTER
WEIGHTU.S.
CODE ITEM LIST
BASE MACHINE (E)
0813 4WD EASY 109HP EXTRADIG 750 lbs $113,149
0838 4WD ADV. EASY 109HP EXTRADIG 750 lbs $114,649
CAB/CANOPY PACKAGES (E)
200A070 $3,966
200A084 $11,071
200A086 $15,806
200A102 $12,118
200A104 $16,853
Advanced Easycontrol
200A196 $12,118
200A197 $16,853CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)
HEATER & AC
HEATER
HEATER & AC
CAB with Air Ride Seat (ADVANCED EASYCONTROL)
4CX-15 SUPER
BACKHOE LOADERU.S. DOLLAR PRICE PAGES
Easycontrol
CANOPY (EASYCONTROL)
CAB (EASYCONTROL) HEATER
CAB with Air Ride Seat (EASYCONTROL)
4CX-15 SUPER, 4WD, CM, 109HP,
P/SHIFT, EASYCONTROL
4CX-15 SUPER, 4WD, CM, 109HP,
P/SHIFT, ADVANCED EASYCONTROL
CAB With Air Conditioning & Air Ride Seat (EASYCONTROL)
NO
HEATER & AC
HEATER
CAB with Air Conditioning (EASYCONTROL)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements,
All prices and specifications subject to change without notice Page 5 of 10 4CX-15 USD Price Pages
SECTION 2 (CONTINUED) - ESSENTIAL FEATURES:
Easycontrol
200C748 $0
200C750 $0
200C751 $325
200C754 $1,000
200C755 $1,325
200C786 $0
200C787 $325
200C790 $1,000
200C791 $1,325
DRIVE CONTROLS (E)
200W84F $0
200W84S $0
200V107 $0
200B64Q $5,907
200B64W $7,402
200B29Q $7,857
200B29W $9,352
EXCAVATOR BUCKETS (E)- PICK ONE, for any additional buckets, please see K codes in Attachments section
200D200 $0
200D311 Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft. $1,123
200D312 Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft. $1,289
200D314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth $1,326
200D315 $1,492
200D316 $1,812
200D317 $2,132
BACKHOE RAM SETS (E)
No Excavator Bucket
Heavy Lift Ram set for Extending dipper - 15 FT machines
MICHELIN TIRE SET
TIRES ( E )
GALAXY TIRE SETS
16.9 x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP
16.9 x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP
440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 109HP
440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 109HP
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth
Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft.
Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft.
USA ONLY - for Easycontrol -Canopy
USA ONLY - for Easycontrol -Cab
Drive controls for Autoshift & Torquelock
COFFEE MACHINE for Advanced Easycontrol
HEATED WINDSHIELD for Advanced Easycontrol
HEATED WINDSHIELD - for Easycontrol
COFFEE MACHINE AND HEATED WINDSHIELD - for Easycontrol
Advanced Easycontrol
USA ONLY for Advanced Easycontrol
Drive controls for Powershift & Torquelock
COFFEE MACHINE AND HEATED WINDSHIELD for Advanced Easycontrol
EFFECTIVE: MAY 1, 2013F.O.B. SAVANNAH, GA 4CX-15 SUPER
BACKHOE LOADERU.S. DOLLAR PRICE PAGES
ELECTRICAL PACKAGES FOR CAB/CANOPY (E)
NOTE: Hammer and/or BiDirectional Circuits are not included in prices shown and should be ordered from Options
under an H or L code. Heated Screen and Coffee Maker are not included in prices shown and should be ordered
from Options under an X code
COFFEE MACHINE - for Easycontrol
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
All prices and specifications subject to change without notice Page 6 of 10 4CX-15 USD Price Pages
EFFECTIVE: MAY 1,
2013
SECTION 2 - (Continued) ESSENTIAL FEATURES
LIST
200E250 No Front Loader Bucket - for ExtraDig dipper $0
200E205 92" 6 IN 1 Bucket $6,202
200E232 96" GP Bucket - for fixed dipper $3,024
200E233 96" 6 IN 1 Bucket $7,068
200E234 96" 6 IN 1 Bucket with Forks $8,731
200E244 96" GP Bucket - for ExtraDig dipper or Hammer Pipework $3,024
Toolcarrier
200E321 Toolcarrier (Q-Fit) no Bucket $3,041
200E322 Toolcarrier and 92" GP Bucket $5,569
200E323 Toolcarrier and 96" GP Bucket $6,146
200E324 Toolcarrier and 92" 6 IN 1 Bucket $8,908
200P212 Pallet Forks and Frame (ITA ) 48" forks - must be ordered with a toolcarrier code $2,521
MANUAL PACK (E)
Easycontrol
200F072 Operator Manual Pack - American English $0
200F073 Operator Manual Pack - French $0
200F075 Operator Manual Pack - Spanish $0
Advanced Easycontrol
200F832 Operator Manual Pack - American English - for Advanced Easycontrol $0
200F833 Operator Manual Pack - French - for Advanced Easycontrol $0
200F835 Operator Manual Pack - Spanish - for Advanced Easycontrol $0
NORTH AMERICAN LEGISLATION (E)
200G450 North American Legislation $0
LOADER BUCKETS (E)
4CX-15 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Direct Mount
All prices and specifications subject to change without notice Page 7 of 10 4CX-15 USD Price Pages
EFFECTIVE: MAY 1,
2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
U.S.
ITEM LIST
STABILIZER FEET
200Y418 Street Feet $150
200Y419 Flip Feet $465
COUNTERWEIGHTS
200Y476 560 Lbs. CWT w/ Cast Insert (4WS builds only) $645
ENGINE COMPARTMENT
200X256 Engine block heater $120
200Y115 Coolant Heater - Eberspacher Diesel Fueled $2,500
OPERATOR'S AREA
200Y289 3" Seat belt $90
AIR CONDITIONING
Easycontrol
200Z547 Air Conditioning for 109HP $0
Advanced Easycontrol
200Z557 Air Conditioning for 109HP & Advanced Easycontrol $0
LOADER AUXILIARY HYDRAULICS
Easycontrol
200R743 5/8 Loader Arm Pipework for Easycontrol $1,073
200R744 5/8 Loader Arm Pipework for Easycontrol & Bi-Directional Circuit $1,073
200R746 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Coffee Machine $1,073
200R748 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Bi-Directional Circuit & Coffee Machine $1,073
Advanced Easycontrol
200R239 5/8 Loader Arm Pipework for Advanced Easycontrol $1,073
F.O.B. SAVANNAH, GA 4CX-15 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGES
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice Page 8 of 10 4CX-15 USD Price Pages
EFFECTIVE: MAY 1,
2013
SECTION 3 - (continued) OPTIONS - NEW FACTORY BUILT ORDERS:
U.S.
LIST
ITEM
SMOOTH RIDE
Easycontrol
200Y464 JCB Smooth Ride - Loader Suspension $2,082
Advanced Easycontrol
200Y810 JCB Smooth Ride - Loader Suspension for Advanced Easycontrol $2,082
HAMMER & BI-DIRECTIONAL CIRCUITS
Easycontrol
200L304 Hammer & Bi-Directional Circuit for EasyContol 15' ExtraDig dipper $5,423
200L308 Hammer & Bi-Directional Circuit for EasyContol 15' ExtraDig dipper & Coffee Machine $5,423
Advanced Easycontrol
200L404 Hammer Pipeworkt for Advanced EasyContol 15' ExtraDig dipper $3,039
200L409 Hammer & Bi-Directional Circuit for Advanced EasyContol 15' ExtraDig dipper $5,423
HAND HELD TOOL CIRCUIT
200V227 Hydraulic Hand Held Tool Circuit for Easycontrol $2,039
MISCELLANEOUS OPTIONS
200Y109 Stabilizer Cylinder Guards $603
200Y113 Canopy Roof (must be selected with any canopy 'A' code) $0
200Y240 Mirrors (L & R) - Exterior Rear View $222
200X266 Driving Lights - Mid level (mounted to cab) $273
200Y285 Lifting Point on backhoe bucket link $140
4CX-15 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice Page 9 of 10 4CX-15 USD Price Pages
EFFECTIVE: MAY 1,
2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
U.S.
LIST
ITEM
BOLT ON CUTTING EDGE
200P208 Bolt-on Cutting Edge for Loader Bucket - 92" $400
200P209 Bolt-on Cutting Edge for Loader Bucket - 96" $400
Q- FIT FORKS
200P212 Pallet Forks and Frame (ITA ) 48" forks - must be ordered with a toolcarrier code $2,521
MECHANICAL COUPLER - Fits JCB Buckets Only
200K260 Backhoe Quick Hitch - Mechanical with Lift Point & Shackle $2,189
200K560 Pivot Pins Kit (use with quickhitch and std excavator bucket) $155
ADDITIONAL BACKHOE BUCKETS
200K311 Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft. $1,123
200K312 Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft. $1,289
200K314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth $1,326
200K315 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth $1,492
200K316 Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft. $1,812
200K317 Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft. $2,132
Up to 4 backhoe buckets may be ordered and shipped with each machine. Combined width of extra buckets, up to 3, must not
exceed 72 inches. Additional buckets and attachments are located in the Dealer Fit Section of the Backhoe Loader Price List
4CX-15 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice Page 10 of 10 4CX-15 USD Price Pages
JCB BACKHOE LOADER
4CX-17 SUPER
CENTERMOUNT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
U.S. DOLLAR PRICE
PAGES
EFFECTIVE: MAY
1, 2013
STANDARD EQUIPMENT
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks operate with ignition key. Front and rear horn buttons.
Automatic backup alarm.
ENGINE 109HP gross, turbocharged, water-cooled,4 cyl, direct injection diesel, T4i compliant engine.
Hand and foot throttle. Full flow pressure engine oil lubrication with spin-on filter cartridge.
Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil coolers.
Two stage fuel filtering system utilizing a water/sediment separator and spin-on type filter element.
Dual element air filter, dry type with cleanable outer element, replaceable inner element and under
hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers.
Powershift gear selection with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WS - Industrial duty 4WD Limited
Slip Differential; outboard planetary reduction, 4WD shift-on-the-go.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing. Steering axle with 3
modes - 2WS, 4WS, and "crab" steer.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation park brake.
Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2WD activated by switch.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle 4WS - 30'2".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Extradig dipper - 17' 7" - 21' 6". Two lever, JCB (SAE)
backhoe controls. Fabricated stabilizer legs with anti-drift valves. Front Fenders standard
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 8' 10"
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 34".
Heavy Lift loader arms standard
4CX-17 SUPER
BACKHOE LOADERF.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice Page 2 of 9 4CX-17 USD Prices Pages
U.S. DOLLAR PRICE
PAGES
F.O.B. SAVANNAH,
GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT (CONT.)
ELECTRICAL SYSTEM 12 volt system with 95 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab also
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs.
HYDRAULIC SYSTEM Open center system, variable displacement pison pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshieldAND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 42.5 gallon fuel tank. 22 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval. 1000 hour trans-
mission oil and 500 hour transmission filter service interval. 2000 hour hydraulic oil and 500 hour
hydraulic filter service interval. External Toolbox.
4CX-17 SUPER BACKHOE
LOADER
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)
All prices and specifications subject to change without notice Page 3 of 9 4CX-17 USD Prices Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS 4CX (4WS)
PACKAGE BUILD CODE: 0614A
Environment: CAB
Controls: ADV. EASY
Gearbox: Autoshift
Dig Depth: 17FT
SALES Horse Power: 109HP
CODE ITEM 4wd-XDIG
0839
200A197
200B64Q
200C786
200D314
200E244
200F832
200G450
200R239
200W84F
200Y428
200P209
200Z557
SUGGESTED LIST PRICE $184,471
Bolt-on Cutting Edge for Loader Bucket - 96"
Air Conditioning for 109HP & Advanced Easycontrol
North American Legislation
5/8 Loader Arm Pipework for Advanced Easycontrol
16.9 x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP
USA ONLY for Advanced Easycontrol
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
Operator Manual Pack - American English - for Advanced Easycontrol
96" GP Bucket - for ExtraDig dipper or Hammer Pipework
EFFECTIVE: MAY 1, 2013
4CX-17 SUPER
BACKHOE LOADER
4CX-17 SUPER, 4WD, CM, 109HP, P/SHIFT, ADVANCED EASYCONTROL
CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)
Drive controls for Powershift & Torquelock
220 Lbs. CWT (must be ordered with 2WS extending dipper or hammer)
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Options & Attachments Sections following.
All prices and specifications subject to change without notice Page 4 of 9 4CX-17 USD Prices Pages
F.O.B. SAVANNAH, GA
SECTION 2 - ESSENTIAL FEATURES:
SALES DRIVE CONTROLSHORSE
POWERDIPPER TYPE
COUNTER
WEIGHTU.S.
CODE ITEM LIST
BASE MACHINE (E)
0814 4WD EASY 109HP EXTRADIG 750 lbs $154,078
0839 4WD ADV. EASY 109HP EXTRADIG 750 lbs $155,578
CAB/CANOPY PACKAGES (E)
200A070 $3,966
200A084 $11,071
200A086 $15,806
200A102 $12,118
200A104 $16,853
Advanced Easycontrol
200A196 $12,118
200A197 $16,853CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)
CANOPY (EASYCONTROL)
CAB (EASYCONTROL)
CAB with Air Conditioning (EASYCONTROL)
CAB with Air Ride Seat (EASYCONTROL)
CAB With Air Conditioning & Air Ride Seat (EASYCONTROL)
CAB with Air Ride Seat (ADVANCED EASYCONTROL)
HEATER
HEATER & AC
HEATER
HEATER & AC
HEATER
HEATER & AC
EFFECTIVE: MAY 1, 2013
NO
4CX-17 SUPER, 4WD, CM, 109HP,
P/SHIFT, EASYCONTROL
U.S. DOLLAR PRICE PAGES
4CX-17 SUPER, 4WD, CM, 109HP,
P/SHIFT, ADVANCED EASYCONTROL
4CX-17 SUPER
BACKHOE LOADER
Easycontrol
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your
All prices and specifications subject to change without notice Page 5 of 9 4CX-17 USD Prices Pages
SECTION 2 (CONTINUED) - ESSENTIAL FEATURES:
200C750 $0
200C751 $325
200C754 $1,000
200C755 $1,325
200C786 $0
200C787 $325
200C790 $1,000
200W84F $0
200W84S Drive controls for Autoshift & Torquelock $0
200B64Q $5,907
200B64W $7,402
200B29Q $7,857
200B29W $9,352
200D200 No Excavator Bucket $0
200D311 $1,123
200D312 $1,289
200D314 $1,326
200D315 $1,492
200D316 $1,812
200D317 $2,132
16.9 x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP
440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 109HP
440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 109HP
EFFECTIVE: MAY 1, 2013F.O.B. SAVANNAH, GA
COFFEE MACHINE for Advanced Easycontrol
USA ONLY - for Easycontrol -Cab
COFFEE MACHINE - for Easycontrol
ELECTRICAL PACKAGES FOR CAB/CANOPY (E)
HEATED WINDSHIELD - for Easycontrol
Easycontrol
COFFEE MACHINE AND HEATED WINDSHIELD - for Easycontrol
TIRES ( E )
Advanced Easycontrol
USA ONLY for Advanced Easycontrol
DRIVE CONTROLS (E)
Drive controls for Powershift & Torquelock
HEATED WINDSHIELD for Advanced Easycontrol
U.S. DOLLAR PRICE PAGES 4CX-17 SUPER
BACKHOE LOADER
GALAXY TIRE SETS
MICHELIN TIRE SET
Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft.
Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft.
EXCAVATOR BUCKETS (E)- PICK ONE, for any additional buckets, please see K codes in Attachments section
Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft.
Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft.
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth
Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth
16.9 x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code
All prices and specifications subject to change without notice Page 6 of 9 4CX-17 USD Prices Pages
EFFECTIVE: MAY 1,
2013
SECTION 2 - ESSENTIAL FEATURES CONT.
LIST
200E250 No Front Loader Bucket - for ExtraDig dipper $0
200E232 96" GP Bucket - for fixed dipper $3,024
200E233 96" 6 IN 1 Bucket $7,068
200E234 96" 6 IN 1 Bucket with Forks $8,731
200E244 96" GP Bucket - for ExtraDig dipper or Hammer Pipework $3,024
Toolcarrier
200E321 Toolcarrier (Q-Fit) no Bucket $3,041
200E322 Toolcarrier and 92" GP Bucket $5,569
200E323 Toolcarrier and 96" GP Bucket $6,146
200E324 Toolcarrier and 92" 6 IN 1 Bucket $8,908
200P212 Pallet Forks and Frame (ITA ) 48" forks - must be ordered with a toolcarrier code $2,521
MANUAL PACK (E)
Easycontrol
200F072 Operator Manual Pack - American English $0
200F073 Operator Manual Pack - French $0
200F075 Operator Manual Pack - Spanish $0
Advanced Easycontrol
200F832 Operator Manual Pack - American English - for Advanced Easycontrol $0
200F833 Operator Manual Pack - French - for Advanced Easycontrol $0
200F835 Operator Manual Pack - Spanish - for Advanced Easycontrol $0
NORTH AMERICAN LEGISLATION (E)
200G450 North American Legislation $0
LOADER BUCKETS (E)
4CX-17 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Direct Mount
All prices and specifications subject to change without notice Page 7 of 9 4CX-17 USD Prices Pages
EFFECTIVE: MAY 1,
2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
U.S.
LIST
ITEM
STABILIZER FEET
200Y418 Street Feet $150
200Y419 Flip Feet $465
ENGINE COMPARTMENT
200Y115 Coolant Heater - Eberspacher Diesel Fueled $2,500
200X256 Engine block heater $120
OPERATOR'S AREA
200Y289 3" Seat belt $90
AIR CONDITIONING
Easycontrol
200Z547 Air Conditioning for 109HP $0
Advanced Easycontrol
200Z557 Air Conditioning for 109HP & Advanced Easycontrol $0
LOADER AUXILIARY HYDRAULICS
Easycontrol
200R743 5/8 Loader Arm Pipework for Easycontrol $1,073
200R744 5/8 Loader Arm Pipework for Easycontrol & Bi-Directional Circuit $1,073
200R746 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Coffee Machine $1,073
200R748 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Bi-Directional Circuit & Coffee Machine $1,073
Advanced Easycontrol
200R239 5/8 Loader Arm Pipework for Advanced Easycontrol $1,073
SMOOTH RIDE
Easycontrol
200Y464 JCB Smooth Ride - Loader Suspension $2,082
Advanced Easycontrol
200Y810 JCB Smooth Ride - Loader Suspension for Advanced Easycontrol $2,082
HYDRAULIC OPTIONS
HAMMER PIPEWORK NOT AVAILABLE ON 17FT MACHINES
BI- DIRECTIONAL CIRCUITS NOT AVAILABLE ON 17FT MACHINES
MISCELLANEOUS OPTIONS
200Y109 Stabilizer Cylinder Guards $603
200Y240 Mirrors (L & R) - Exterior Rear View $222
200X266 Driving Lights - Mid level (mounted to cab) $273
200Y285 Lifting Point on backhoe bucket link $140
4CX-17 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice Page 8 of 9 4CX-17 USD Prices Pages
EFFECTIVE: MAY 1,
2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
U.S.
LIST
ITEM
BOLT ON CUTTING EDGE
200P208 Bolt-on Cutting Edge for Loader Bucket - 92" $400
200P209 Bolt-on Cutting Edge for Loader Bucket - 96" $400
Q- FIT FORKS
200P212 Pallet Forks and Frame (ITA ) 48" forks - must be ordered with a toolcarrier code $2,521
MECHANICAL COUPLER - Fits JCB Buckets Only
200K260 Backhoe Quick Hitch - Mechanical with Lift Point & Shackle $2,189
200K560 Pivot Pins Kit (use with quickhitch and std excavator bucket) $155
ADDITIONAL BACKHOE BUCKETS
200K311 Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft. $1,123
200K312 Backhoe Bucket - 18" heavy duty, 4.9 cu. Ft. $1,289
200K314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth $1,326
200K315 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth $1,492
200K316 Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft. $1,812
200K317 Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft. $2,132
Up to 4 backhoe buckets may be ordered and shipped with each machine. Combined width of extra buckets, up to 3, must not
exceed 72 inches. Additional buckets and attachments are located in the Dealer Fit Section of the Backhoe Loader Price List
4CX-17 SUPER
BACKHOE LOADER
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice Page 9 of 9 4CX-17 USD Prices Pages
COMPACTION
VIBRATORY SINGLE DRUM ROLLER
VM115
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE JCB 444 TA, Tier III compliant, 130 hp, JCB Dieselmax turbo-charged diesel engine, Dry cartridge
air cleaner plus safety cartridge. Water separator, spin-on oil filter, antifreeze protection to
-30 degrees Fahrenheit.
TRANSMISSION Hydrostatic drive to front drum and rear wheels with traction control.
PARKING BRAKE Spring applied, hydraulic release disk brakes on the drum and rear axle.
ELECTRICAL 12 volt with 95 amp alternator and 540 CCA battery. Fuses and relays are centrally located under
operator's platform.
TIRES 115D: 23.1 - 26 / 8 PR AWT
115PD: 23.1 - 26 / 12 PR Tractor Tread
DRUMS Width: 82.7"
Diameter 115D: 59.1"
Diameter 115PD: 55.1" (63.0" over pads)
COMPACTION VM115D VM115PD
1 2 1 2
Frequency: 1860 vpm 2160 vpm 1860 vpm 2160 vpm
Amplitude: 0.077 in 0.035 in 0.077 in 0.035 in
Centrifugal force: 58675 lbf 36644 lbf 63396 lbf 39566 lbf
OPERATOR'S ROPS, hand rails, adjustable cushioned seat with seatbelt, automatic vibration control,
PLATFORM instrument panel cover, horn. Option: EROPS cab, hand rails, adjustable cushioned seat
with seatbelt, wipers, defroster fan and front and rear worklights
INSTRUMENTATION Gauges: Fuel, Hourmeter and Engine temperature, Indicator lights for engine oil pressure,
alternator charge, hydraulic oil filter, air filter, neutral start position and parking brake.
VM115
VIBRATORY SINGLE DRUM ROLLER
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - NOT CURRENTLY OFFERED
DEALER FIT - VM115 SINGLE DRUM ROLLER (LISTED SEPARATELY)
All prices and specifications subject to change without notice page 2 of 4 VM115 Single Dr. USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 3062A 3062B 3063A 3063BCODE ITEM VM115D VM115D VM115PD VM115PD
3022 VM115D Smooth drum roller Tier III (JCB Dieselmax 130
hp turbo-charged diesel engine)
3023 VM115PD Padfoot drum roller Tier III (JCB Dieselmax 130
hp turbo-charged diesel engine)
300A003 ROPS Frame VM75/115
300L006 FOPS for ROPS equipped machines VM75/115/132
300A002 Cab, with wipers and defroster fan, factory fit, front & rear worklights, (no heat) VM75/115/132
300L013 Heater and A/C for factory installed cab VM75/115/132
300B001 Operator's manual - English All VM
300L003 Instrument panel cover All VM
Shipping Weight - Lbs. 25,299 25,463 25,961 26,125
Shipping Weight - Kgs. 11,476 11,550 11,776 11,850
SUGGESTED LIST PRICE $131,806 $147,310 $139,672 $155,176
VM115
VIBRATORY SINGLE DRUM ROLLER
Select one of the following machine PACKAGE BUILD codes.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 3 of 4 VM115 Single Dr. USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
3022 VM115D Smooth drum roller Tier III (JCB Dieselmax 130 hp turbo-charged diesel engine) 24,912 11,324 $127,970
3023 VM115PD Padfoot drum roller Tier III (JCB Dieselmax 130 hp turbo-charged diesel engine) 25,574 11,625 $135,836
MANUALS (E)
300B001 Operator's manual - English All VM 0 0 $0
OPERATOR'S AREA (E)
300A003 ROPS Frame VM75/115 0 0 $2,912
300L006 FOPS for ROPS equipped machines VM75/115/132 386 175 $924
VANDAL COVER (E)
300L003 Instrument panel cover All VM 1 0 $0
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
CAB CONDITIONING SYSTEMS
300A002 Cab, with wipers and defroster fan, factory fit, front & rear worklights, (no heat) VM75/115/132 550 250 $12,761
300L028 Heater for factory installed cab VM75/115/132 0 0 $1,422
300L013 Heater and A/C for factory installed cab VM75/115/132 0 0 $6,579
DRUMS
300K013 Polyurethane scrapers (D) VM115/132 20 9 $1,134
300K017 Padfoot shell and scraper bar-factory install VM115/132 3,400 1,545 $17,978
300K019 Padfoot shell and scraper bar-loose VM115/132 3,400 1,545 $20,478
OTHER MACHINE OPTIONS
300H002 Roadlights for ROPS equipped machines VM115/132 20 9 $1,288
300H004 Rotating Beacon VM115/132 0 0 $357
300H010 Roadlights for Cab equipped machines VM115/132 20 9 $1,288
300L002 Compactronic Compaction Meter (factory fitted) VM75/115/132 0 0 $4,872
300L055 Parts Book VM115 0 0 $88
300L020 Sunshade kit for ROPS (NOT compatible with 300L006) VM75/115/132 0 0 $1,316
300K009 Leveling blade kit (not compatible with smooth drum or shell kit) 1,100 500 $13,171
VM115
VIBRATORY SINGLE DRUM ROLLER
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options from Section 3 as needed.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 4 of 4 VM115 Single Dr. USD Price Page
VIBRATORY SINGLE DRUM ROLLER
VM132
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE JCB 444 TCA, Tier III compliant, 145 hp, turbo-charged diesel engine with charged
air cooler, Dry cartridge air cleaner plus safety cartridge. Water separator, spin-on oil filter, antifreeze
protection to -30 degrees Fahrenheit.
TRANSMISSION Hydrostatic drive to front drum and rear wheels with traction control.
PARKING BRAKE Spring applied, hydraulic release disk brakes on the drum and rear axle.
ELECTRICAL 12 volt with 95 amp alternator and 540 CCA battery. Fuses and relays are centrally located under
operator's platform.
TIRES: 132D: 23.1 - 26 / 8 PR AWT
132PD: 23.1 - 26 / 12 PR Tractor Tread
DRUMS Width: 82.7"
Diameter 132D: 59.1"
Diameter 132PD: 55.1" (63.0" over pads)
COMPACTION VM132D VM132PD
1 2 1 2
Frequency: 1740 vpm 2160 vpm 1740 vpm 2160 vpm
Amplitude: 0.079 in 0.031 in 0.079 in 0.031 in
Centrifugal force: 63396 lbf 39117 lbf 68567 lbf 42264 lbf
OPERATOR'S ROPS, hand rails, adjustable cushioned seat with seatbelt, automatic vibration control,
PLATFORM instrument panel cover, horn. Option: EROPS cab, hand rails, adjustable cushioned seat
with seatbelt, wipers, defroster fan and front and rear worklights
INSTRUMENTATION Gauges: Fuel, Hourmeter and Engine temperature, Indicator lights for engine oil pressure,
alternator charge, hydraulic oil filter, air filter, neutral start position and parking brake.
VM132
VIBRATORY SINGLE DRUM ROLLER
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - NOT CURRENTLY OFFERED
DEALER FIT - VM132 SINGLE DRUM ROLLER (LISTED SEPARATELY)
All prices and specifications subject to change without notice page 2 of 4 VM132 Single Dr. USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 3068A 3069A 3069BCODE ITEM VM132D VM132PD VM132PD
3026
3027
300A004 ROPS Frame VM132
300L006 FOPS for ROPS equipped machines VM75/115/132
300A002Cab, with wipers and defroster fan, factory fit, front & rear
worklights, (no heat) VM75/115/132
300L013 Heater and A/C for factory installed cab VM75/115/132
300B001 Operator's manual - English All VM
300L003 Instrument panel cover All VM
Shipping Weight - Lbs. 29,047 29,211 29,929 30,093
Shipping Weight - Kgs. 13,176 13,250 13,576 13,650
SUGGESTED LIST PRICE $152,741 $160,751 $176,108
$168,098
VM132
VIBRATORY SINGLE DRUM ROLLER
VM132D Smooth drum roller Tier III (JCB 444, 145 hp turbo-charged
diesel engine with charged air cooler)
VM132PD Padfoot drum roller Tier III (JCB 444, 145 hp turbo-charged
diesel engine with charged air cooler)
3068BVM132D
Select one of the following machine PACKAGE BUILD codes.
All prices and specifications subject to change without notice page 3 of 4 VM132 Single Dr. USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
3026 28,660 13,027 $148,759
3027 29,542 13,428 $156,769
MANUALS (E)
300B001 Operator's manual - English All VM 0 0 $0
OPERATOR'S AREA (E)
300A004 ROPS Frame VM132 0 0 $3,058
300L006 FOPS for ROPS equipped machines VM75/115/132 386 175 $924
VANDAL COVER (E)
300L003 Instrument panel cover All VM 1 0 $0
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
CAB CONDITIONING SYSTEMS
300A002 Cab, with wipers and defroster fan, factory fit, front & rear worklights, (no heat) VM75/115/132 550 250 $12,761
300L013 Heater and A/C for factory installed cab VM75/115/132 0 0 $6,579
300L028 Heater for factory installed cab VM75/115/132 0 0 $1,422
DRUMS
300K013 Polyurethane scrapers (D) VM115/132 20 9 $1,134
300K017 Padfoot shell and scraper bar-factory install VM115/132 3,400 1,545 $17,978
300K019 Padfoot shell and scraper bar-loose VM115/132 3,400 1,545 $20,478
OTHER MACHINE OPTIONS
300H002 Roadlights for ROPS equipped machines VM115/132 20 9 $1,288
300H004 Rotating Beacon VM115/132 0 0 $357
300H010 Roadlights for Cab equipped machines VM115/132 20 9 $1,288
300L002 Compactronic Compaction Meter (factory fitted) VM75/115/132 0 0 $4,872
300L020 Sunshade kit for ROPS (NOT compatible with 300L006) VM75/115/132 0 0 $1,316
300K022 Leveling blade kit (not compatible with smooth drum or shell kit) 1,100 500 $14,922
VM132
VIBRATORY SINGLE DRUM ROLLER
VM132D Smooth drum roller Tier III (JCB 444, 145 hp turbo-charged diesel
engine with charged air cooler)
VM132PD Padfoot drum roller Tier III (JCB 444, 145 hp turbo-charged diesel
engine with charged air cooler)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options from Section 3 as needed.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 4 of 4 VM132 Single Dr. USD Price Page
VIBRATORY TRENCH COMPACTOR
VM1500
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE Kubota 23.5 hp, Tier IV, water-cooled diesel engine. Dry cartridge air cleaner and
cartridge type fuel filter.
TRANSMISSION Hydrostatic drive to all four drums.
PARKING BRAKE Hydraulically released multi-disk brake on rear drums.
ELECTRICAL 12 volt, with 40 amp alternator.
DRUMS Width: 24.8" or 33.5"
Diameter: 19.7"
EXCITER Single shaft frame mounted exciter with manual reverse.
COMPACTION Frequency: 1,860 vpm
Amplitude: 0.09 in
Centrifugal force: 18,880 lbf
CONTROLS Radio remote control ("R" model) or manual control ("M" model)
INSTRUMENTATION Gauges: Hourmeter, Indicator lights for engine oil pressure, engine temperature indicator,
alternator charge and pre-heating.
VM1500
VIBRATORY TRENCH COMPACTOR
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS - NOT CURRENTLY OFFERED
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - NOT CURRENTLY OFFERED
DEALER FIT - VM1500 TRENCH COMPACTORS (LISTED SEPARATELY)
All prices and specifications subject to change without notice page 2 of 3 VM1500 Trencher USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 3205A 3206A 3207A 3208ACODE ITEM VM1500 VM1500 VM1500 VM1500
3205 VM1500R24 Trench Roller with 24.8" drums and Remote controls
3206 VM1500R33 Trench Roller with 33.5" drums and Remote controls
3207 VM1500M24 Trench Roller with 24.8" drums and Manual controls
3208 VM1500M33 Trench Roller with 33.5" drums and Manual controls
320A001 Operator's manual - English
Shipping Weight - Lbs. 3,307 3,507 3,307 3,507
Shipping Weight - Kgs. 1,500 1,591 1,500 1,591
SUGGESTED LIST PRICE $42,822 $43,261 $39,520 $39,959
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
DRUM OPTIONS
320H001 Drum conversion kit from 24.8" to 33.5" 1,090 495 $3,924
320H003 Anti- Vandalism Kit - - $342
VM 1500
VIBRATORY TRENCH COMPACTOR
Select one of the following machine PACKAGE BUILD codes.
Select Optional Equipment as desired within limitations if indicated.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 3 of 3 VM1500 Trencher USD Price Page
VIBRATORY SINGLE DRUM ROLLER
VM75
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE JCB 444TA, Tier III compliant, 84 hp, diesel engine, air cleaner with dual elements.
Water separator, spin-on oil filter, antifreeze protection to -30 degrees Fahrenheit.
TRANSMISSION Hydrostatic drive to front drum and rear wheels with traction control.
PARKING BRAKE Spring applied, hydraulic release disk brakes on the drum and rear axle.
ELECTRICAL 12 volt with 60 amp alternator and 540 CCA battery. Fuses and relays are centrally located under
operator's platform.
TIRES 75D: 14.9 - 24 6 ply AWT
75PD:14.9 - 24 8 ply Dyna Torque II
DRUMS Width: 68.9"
Diameter 75D: 48"
Diameter 75PD: 44.9" (51.2" over pads)
COMPACTION VM75D VM75PD
1 2 1 2
Frequency: 1740 vpm 2160 vpm 1740 vpm 2160 vpm
Amplitude: 0.079 in 0.031 in 0.079 in 0.031 in
Centrifugal force: 31024 lbf 18884 lbf 35070 lbf 21582 lbf
OPERATOR'S ROPS, hand rails, adjustable cushioned seat with seatbelt, automatic vibration control,
PLATFORM instrument panel cover, horn. Option: Enclosed ROPS cab, hand rails, adjustable cushioned
seat, seatbelt, wipers, defroster fan.
INSTRUMENTATION Gauges: Fuel, Hourmeter and Engine temperature, Indicator lights for engine oil pressure,
alternator charge, hydraulic oil filter, air filter, neutral start position and parking brake.
VM75
VIBRATORY SINGLE DRUM ROLLER
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - NOT CURRENTLY OFFERED
DEALER FIT - VM75 SINGLE DRUM ROLLER (LISTED SEPARATELY)
All prices and specifications subject to change without notice page 2 of 4 VM75 Single Drum USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 3070A 3071A 3071BCODE ITEM VM75D VM75PD VM75PD
3017 VM75D Smooth drum roller (JCB 444TA Tier III 84 hp diesel engine)
3018 VM75PD Padfoot drum roller (JCB 444TA Tier III 84 hp diesel engine)
300A003 ROPS Frame VM75/115
300L006 FOPS for ROPS equipped machines VM75/115/132
300A002 Cab, with wipers and defroster fan, factory fit, front & rear worklights, (no heat) VM75/115/132
300B001 Operator's manual - English All VM
300L003 Instrument panel cover All VM
Shipping Weight - Lbs. 16,481 17,142 17,305
Shipping Weight - Kgs. 7,476 7,776 7,850
SUGGESTED LIST PRICE $109,709 $116,507 $132,010
VM75
VIBRATORY SINGLE DRUM ROLLER
3070BVM75D
$125,212
16,645
7,550
Select one of the following machine PACKAGE BUILD codes.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 3 of 4 VM75 Single Drum USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
3017 VM75D Smooth drum roller (JCB 444TA Tier III 84 hp diesel engine) 16,094 7,315 $105,873
3018 VM75PD Padfoot drum roller (JCB 444TA Tier III 84 hp diesel engine) 16,755 7,616 $112,671
MANUALS (E)
300B001 Operator's manual - English All VM 0 0 $0
OPERATOR'S AREA (E)
300A003 ROPS Frame VM75/115 0 0 $2,912
300L006 FOPS for ROPS equipped machines VM75/115/132 386 175 $924
VANDAL COVER (E)
300L003 Instrument panel cover All VM 1 0 $0
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
CAB CONDITIONING SYSTEMS
300A002 Cab, with wipers and defroster fan, factory fit, front & rear worklights, (no heat) VM75/115/132 550 250 $12,761
300L013 Heater and A/C for factory installed cab VM75/115/132 0 0 $6,579
300L028 Heater for factory installed cab VM75/115/132 0 0 $1,422
DRUMS
300K006 Polyurethane scrapers (D) VM75 20 9 $794
300K007 Padfoot shell and scraper bar-factory install VM75 0 0 $12,760
300K008 Padfoot shell and scraper bar-loose VM75 2,300 1,045 $15,260
OTHER MACHINE OPTIONS
300H022 Roadlights for ROPS equipped machines VM75 20 9 $1,288
300H023 Roadlights for Cab equipped machines VM75 20 9 $1,288
300H024 Rotating Beacon VM46/75 0 0 $357
300L002 Compactronic Compaction Meter (factory fitted) VM75/115/132 0 0 $4,872
300L010 Parts Book VM75 0 0 $108
300L020 Sunshade kit for ROPS (NOT compatible with 300L006) VM75/115/132 0 0 $1,316
300K038 Leveling blade kit (not compatible with smooth drum or shell kit) 790 359.1 $12,358
VM75
VIBRATORY SINGLE DRUM ROLLER
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options from Section 3 as needed.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 4 of 4 VM75 Single Drum USD Price Page
VIBRATORY TANDEM ROLLER
VMT160
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE Kubota 23 hp Tier IV, 3-cylinder diesel engine. 12 gallon fuel tank.
TRANSMISSION Hydrostatic drive to both drums.
PARKING BRAKE SAHR / Hydrostatically released multi-disc brake on both drums.
ELECTRICAL 12 volt with 40 amp alternator and 300 CCA battery. Auxillary socket for rotating beacon. Reverse alarm.
DRUMS Dual drum vibration with independent front/rear shut-off.
Dual, spring loaded, retractable, polyurethane scrapers on each drum.
VMT160-90 VMT160-90TSC
Drum Width: 35.4" 35.4"
Working Width: 35.4" 39.4"
Diameter: 22.8" 22.8"
COMPACTION
Frequency:
Amplitude:
Centrifugal force:
SPRAY SYSTEM 33 gallon watertank, pressurized water filtering sprinkler system with solid copper spray bars and adjustable
nozzles. Spray nozzles are removable for easy, on site cleaning. Operator controlled variable flow rate.
OPERATOR'S ROPS, hand rails, cup holder, adjustable cushioned seat with armrests and seatbelt, emergency shutdown button.
PLATFORM Seat is equipped with engine shut- off safety switch
INSTRUMENTATION Gauges: Hourmeter, indicator lights for fuel level, alternator charge, vibration, sprinkler system,
parking brake, engine oil pressure, air and hydraulic oil filter condition and neutral start position.
2,068…4,047 lbf
VMT 160
VIBRATORY TANDEM ROLLER
VMT160 - ALL MODELS
3000…3960 vpm
0.02 in
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - NOT CURRENTLY OFFERED
DEALER FIT - LISTED SEPARATELY FOR ALL TANDEM ROLLERS
All prices and specifications subject to change without notice page 2 of 4 VMT 160 USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 3154A 3160AVMT160-90 VMT160-90
SALES TSC ROPS
CODE ITEM ROPS
3154 VMT160-90TSC Tandem Drum Vibratory Roller fixed center joint with 35.4" drums - 23HP ENGINE
3160 VMT160-90TSC Tandem Drum Vibratory Roller with 35.4" drums - 23HP ENGINE
310A017 Fixed ROPS Frame
310B018 Operator's manual - English
310L044 Instrument panel cover
310C011 North American Build
Shipping Weight - Lbs. 3,650 3,650
Shipping Weight - Kgs. 1,656 1,656
SUGGESTED LIST PRICE $38,355 $866
VMT 160
VIBRATORY TANDEM ROLLER
Select ONE of the following machine PACKAGE BUILD codes.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 3 of 4 VMT 160 USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
3154 VMT160-90TSC Tandem Drum Vibratory Roller fixed center joint with 35.4" drums - 23HP ENGINE 3,650 1,659 $37,489
3160 VMT160-90TSC Tandem Drum Vibratory Roller with 35.4" drums - 23HP ENGINE 3,650 1,659 $0
MANUALS (E)
310B018 Operator's manual - English 0 - $0
OPERATOR'S AREA (E)
310A017 Fixed ROPS Frame 0 - $866
310L044 Instrument panel cover 0 0 $0
NORTH AMERICAN ESSENTIAL CODE (E)
310C011 North American Build 0 - $0
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OTHER MACHINE OPTIONS
310A015 Folding ROPS frame 0 - $1,264
310H019 Road Travel Lights 0 - $638
310H021 Rotating Beacon 0 - $193
310L052 Parts Book TSC 0 - $88
310L042 Tool Bag 0 - $88
310L066 Canopy VMT160 0 0 $1,244
VMT 160
VIBRATORY TANDEM ROLLER
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options from Section 3 as needed.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 4 of 4 VMT 160 USD Price Page
VIBRATORY TANDEM ROLLER
VMT260
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE Kubota 32 hp Interim Tier IV, 3-cylinder diesel engine. 25 gallon fuel tank
TRANSMISSION Hydrostatic drive to both drums.
PARKING BRAKE SAHR / Hydrostatically released multi-disc brake on both drums.
ELECTRICAL 12 volt with 40 amp alternator and 510 CCA battery. Auxillary socket for beacon. Reverse alarm.
DRUMS Dual drum vibration with independent front/rear shut-off. 80mm manual drum offset
Dual, spring loaded, retractable, polyurethane scrapers on each drum.
VMT260-100 VMT260-120
Drum Width: 39.4 in 47.2 in
Diameter: 27.5 in 27.5 in
COMPACTION VMT260
Frequency: 3000…3960 vpm
Amplitude: 0.02 in
Centrifugal force: 5,845…10,116 lbf
SPRAY SYSTEM 33 gallon watertank, pressurized water filtering sprinkler system with solid copper spray bars and adjustable
nozzles. Spray nozzles are removable for easy, on site cleaning. Operator controlled variable flow rate.
OPERATOR'S ROPS, hand rails, cupholder, worklights, adjustable cushioned seat with armrests and seatbelt, emergency
PLATFORM shutdown button. Seat equipped with an engine shut-off safety switch
INSTRUMENTATION Gauges: Hourmeter, indicator lights for fuel level, alternator charge, vibration, sprinkler system,
parking brake, engine oil pressure, air and hydraulic oil filter condition and neutral start position.
VMT 260
VIBRATORY TANDEM ROLLER
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - NOT CURRENTLY OFFERED
DEALER FIT - LISTED SEPARATELY FOR ALL TANDEM ROLLERS
All prices and specifications subject to change without notice page 2 of 4 VMT260 USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 3164A 3165AVMT260-100 VMT260-120
SALES 32 HP 32 HP
CODE ITEM ROPS ROPS
3151 VMT260-100 Tandem Drum Vibratory Roller offset with 39.4" drums - 32HP ENGINE
3152 VMT260-120 Tandem Drum Vibratory Roller offset with 47.2" drums - 32HP ENGINE
310A018 Fixed ROPS Frame
310B018 Operator's manual - English
310C011 North American Build
310L045 Instrument panel cover
Shipping Weight - Lbs. 5,732 5,952
Shipping Weight - Kgs. 2,600 2,700
SUGGESTED LIST PRICE $50,554 $51,309
VMT 260
VIBRATORY TANDEM ROLLER
Select ONE of the following machine PACKAGE BUILD codes.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 3 of 4 VMT260 USD Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
3151 VMT260-100 Tandem Drum Vibratory Roller offset with 39.4" drums - 32HP ENGINE 5,732 2,605 $49,409
3152 VMT260-120 Tandem Drum Vibratory Roller offset with 47.2" drums - 32HP ENGINE 5,952 2,705 $50,164
MANUALS (E)
310B018 Operator's manual - English 0 - $0
OPERATOR'S AREA (E)
310A018 Fixed ROPS Frame 0 - $1,145
310L045 Instrument panel cover 0 - $1,535
ESSENTIAL CODE (E)
310C011 North American Build 0 - $0
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OTHER MACHINE OPTIONS
310A019 Folding ROPS frame 0 - $1,535
310H021 Rotating Beacon 0 - $193
310H027 Road Travel Lights 0 - $720
310L046 Parts Books 0 - $88
310L047 Tool Bag 0 - $88
310L063 Sunroof mounted on ROPS VMT260 0 - $1,532
VMT 260
VIBRATORY TANDEM ROLLER
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options from Section 3 as needed.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 4 of 4 VMT260 USD Price Page
COMPACT EXCAVATOR
JCB MINI EXCAVATOR
8008MICRO EXCAVATOR
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
8008 MICRO EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE 0.8 liter (46.5 CID), Interim Tier IV compliant 12 SAE net horsepower Perkins engine,
centrifugal dry type air cleaner. Water separator, spin on oil filter, thermostart assist,
antifreeze protection to -35 degrees F.
TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors
and gearbox. High torque 1.1 mph travel speed.
TRACKS 7 inch rubber tracks with 2 rollers per side result in 3.3 psi ground pressure.
5.0"of ground clearance. Hydraulically acuated expanding undercarriage providing
a machine width of 28" retracted and 35" expanded.
EXCAVATOR 5' 6" Max. dig depth with standard 2'10" dipper. Mechanical controls, with selectable DPC - Dual
Pattern Control (SAE and ISO) changed by electric toggle switch.
Auxiliary circuit provides 5.0 GPM for JCB hydraulic breakers and other approved attachments.
Boom swing left 70 degree, right 70 degree. Single acting hydraulics fit as standard.
CANOPY Meets SAE TOPS/FOPS/FOGS requirements. Dual side entry into operator's station.
Vinyl operators seat is adjustable forward and aft. Slew lock prevents movement during travel.
Excavator controls are low lever effort - mechanically activated. All models are equipped
with safety interlock to prevent inadvertent boom/bucket movement. Hand operated
tracking levers. Instrument panel contains: ignition switch, fuses, auxiliary switches,
engine audio and visual warning indicators and fuel guage.
Foot pedals activiate auxiliary hydraulics and boom offset.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 2 of 5 8008 MICRO USD Price Page
8008 MICRO EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8092BSALES 8008
CODE ITEM CANOPY
8093 8008 Micro excavator with 12 hp diesel engine, dozer blade and 5' 6" dig depth
820A003 Rear mounted TOPS frame with front handrail
820B001 Rubber Tracks - 7 inch width
820C002 Dual Pattern Control (DPC) system - ISO to SAE
820D002 High back vinyl seat
820E614 American language pack
820F001 Standard Dipper 34.9" (887mm)
820G002 Grease tensioner for tracks
820H001 Single acting auxiliary hydraulic circuit
820J003 Boom mounted worklight
Shipping Weight - Lbs. 1,929
Shipping Weight - Kgs. 875
SUGGESTED LIST PRICE $22,223
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4.
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements
please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 8008 MICRO USD Price Page
8008 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
8093 8008 Micro excavator with 12 hp diesel engine, dozer blade and 5' 6" dig depth 1,929 877 $20,249
OPERATOR'S AREA (E)
820A001 Front mounted TOPS frame 25 11 $442
820A003 Rear mounted TOPS frame with front handrail 29 13 $746
820A004 Front handrail 4 2 $130
UNDERCARRIAGE (E)
820B001 Rubber Tracks - 7 inch width 250 114 $0
CONTROLS (E)
820C002 Dual Pattern Control (DPC) system - ISO to SAE 10 5 $442
SEATS (E)
820D002 High back vinyl seat 35 16 $166
OPERATORS HANDBOOK (E)
820E614 American language pack 1 0 $0
820E615 French language pack 1 0 $0
DIPPER (E)
820F001 Standard Dipper 34.9" (887mm) 400 182 $365
TRACK TENSIONER (E)
820G002 Grease tensioner for tracks 2 1 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
820H001 Single acting auxiliary hydraulic circuit 15 7 $151
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 5 8008 MICRO USD Price Page
8008 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS **
820J003 Boom mounted worklight 2 1 $105
820L003 Toolkit 10 5 $67
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKET OPTIONS
820M001 6" Standard duty - .30 cu. Ft capacity 70 32 $429
820M002 9" Standard duty - .55 cu. Ft capacity 80 36 $452
820M003 12" Standard duty - .78 cu. Ft capacity 100 45 $466
820M004 28" Standard duty - 2.0 cu. Ft capacity 160 73 $553
820M005 16" Heavy duty - 1.0 cu. Ft capacity 110 50 $533
820M006 Bucket - 12 inch (300mm) with Additional Tooth 100 45 $509
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 5 8008 MICRO USD Price Page
JCB MINI EXCAVATOR
8018
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
8018 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE 1.13 L (69.0 CID ), Interim Tier IV compliant, 19 net hp, Perkins engine, centrifugal dry type air cleaner.
Water separator, spin - on oil filter, thermostart assist, anti-freeze protection to -35 degrees F.
New 500 hour service interval - twice as long as previous model.
TRANSMISSION Independent track control. Hydraulic pumps drive integral track motors and gearbox.
Two speed travel - 1.24 mph in low and 2.36 mph in high. Auto kickdown feature allows machine to
automatically change from high to low when needed, maximizing power and productivity.
TRACKS Rubber or steel track options hydraulically adjusted. Under carriage rollers 3 per side. Track width 9 inches.
Ground pressure 4.55 lb. per square inch. Ground clearance 6". The 8018 features a hydraulically actuated
expanding undercarriage providing a machine width of 38.18" retracted and 53.15" expanded. Track tension
is maintained through a grease cylinder
ELECTRICAL 12 volt, 60 Ah battery, with 40 amp alternator. Waterproof wire harness connectors meet/exceed
IP67 electrical system rating.
EXCAVATOR Max. dig depth with standard 45.7" dipper is 8'1". New tubular boom design provides increased strength,
visibility and improved hose and tube protection vs. conventional steel box structure design.
Dual Pattern Controls (DPC) easily changes controls from ISO (Excavator) to SAE (Backhoe).
Auxiliary circuit provides 8.3 GPM for JCB hydraulic breakers and other approved attachments.
Boom swing left 55 degrees, right 75 degrees. Bucket rotation 198 degrees. Less excavator bucket.
CANOPY Meets SAE TOPS/FOPS/FOGS requirements, left side entry. Canopy and optional cab tilts up for improved
access to mid-ship of the machine for service and maintenance. Vinyl operators seat, adjustable forward
and aft. FOGS Guard added for extra level of safety and protection. Cab swing lock pin and lockable
tool box. Excavator controls are servo operated (hydraulic) . All models equipped with safety
interlock. Hand operated independent track drive levers. Instrument panel contains: ignition switch, fuses,
auxiliary switches and engine audio visual warning indicators. Foot pedals for boom swing and auxiliary circuit.
OPTIONAL CAB AREA Meets SAE TOPS/FOPS/FOGS requirements. Same equipment as canopy with fabric seat, heater,
front and side opening windows. Left side cab entry and exit. Optional cab tilts up for improved access
to mid-ship of the machine for service and maintenance.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 2 of 5 8018 USD Prices Page
8018 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8046A 8046BSALES 8018 8018
CODE ITEM CAB CANOPY
8062 8018 base m/c, servo controls, 2 speed, expanding undercarriage (19.7 Gross/19 hp Net)
800A041 TOPS/FOPS/FOGS cab, heater windshield wiper and fabric seat
800A038 TOPS/FOPS/FOGS canopy, vinyl seat
800B017 9" (230mm) Rubber Tracks
800C026 DPC - Dual pattern controls change from ISO (Excavator) to SAE (Backhoe)
800D010 Vinyl static seat
800D012 Fabric static seat
800E698 American operator handbook
800F016 Standard dipper - 45.7" (1161mm) Provides a dig depth of 8'-1"
800G012 Standard Dozer Blade
800K012 FOGS Guard Kit
800H044
800J012 Worklights - For Cab Only
800L045 Track Lever Pedals
Shipping Weight - Lbs. 4,218 4,022
Shipping Weight - Kgs. 1,917 1,828
SUGGESTED LIST PRICE $34,962 $32,088
Double acting hydraulics to dipper end (suitable for thumb attachment or auger) (not compatible
w/Gravemaster Dipper)
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using
the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 8018 USD Prices Page
8018 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
8062 8018 base m/c, servo controls, 2 speed, expanding undercarriage (19.7 Gross/19 hp Net) 3,554 1,615 $26,148
OPERATORS AREA (E)
800A038 TOPS/FOPS/FOGS canopy, vinyl seat - - $770
800A041 TOPS/FOPS/FOGS cab, heater windshield wiper and fabric seat 196 89 $3,644
UNDERCARRIAGE (E)
800B013 9" (230mm) Steel Tracks 313 142 $2,178
800B017 9" (230mm) Rubber Tracks 220 100 $1,463
CONTROLS (E)
800C026 DPC - Dual pattern controls change from ISO (Excavator) to SAE (Backhoe) 40 18 $2,767
SEATS (E)
800D010 Vinyl static seat - - $0
800D012 Fabric static seat - - $0
800D011 Vinyl suspension seat 5 2 $436
800D013 Fabric suspension seat 5 2 $436
OPERATORS HANDBOOK (E)
800E698 American operator handbook - - $40
DIPPER (E)
800F016 Standard dipper - 45.7" (1161mm) Provides a dig depth of 8'-1" 68 31 $282
800F017 Long Dipper - 49.6" (1261mm) Provides a dig depth of 8'-5" 70 32 $338
800F018 75 34 $676
DOZER (E)
800G012 Standard Dozer Blade 70 32 $0
OPERATORS COMPARTMENT (E)
800K012 FOGS Guard Kit 44 20 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
800H044 15 7 $406
Grave Master Dipper - 59" (1500mm) Provides a dig depth of 9'-2.5" (not compatible with auxiliary
hydraulic pipework)
Double acting hydraulics to dipper end (suitable for thumb attachment or auger) (not compatible
w/Gravemaster Dipper)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 5 8018 USD Prices Page
8018 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OTHER HYDRAULIC OPTIONS
800H050 Variable displacement hydraulic pump 15 7 $1,014
800L035 Travel Alarm 5 2 $478
800L022 Panolin biodegradeable hydraulic oil - - $592
OPERATORS COMPARTMENT OPTIONS
800J012 Worklights - For Cab Only 10 5 $144
800J015 Worklights - For Canopy Only 10 5 $144
800L017 Exterior mirror - For Cab Only 5 2 $82
800L409 Exterior mirror - For Canopy Only 5 2 $82
800L045 Track Lever Pedals 1 0 $67
800L024 Sun Blind 2 1 $141
BUCKET OPTIONS
800M010 6" Standard duty - 0.33 cu. Ft. capacity heaped 80 36 $421
800M011 9" Standard duty - 0.61 cu. Ft. capacity heaped 90 41 $443
800M012 12" Standard duty - 0.86 cu. Ft. capacity heaped 110 50 $455
800M013 16" Standard duty - 1.14 cu. Ft. capacity heaped 120 55 $523
800M014 18" Standard duty - 1.14 cu. Ft. capacity heaped 135 61 $567
800M015 18" High Breakout Performance - 1.14 cu. Ft. capacity
heaped (Incompatible with mechanical quick hitch)
140 64 $592
800M016 24" Standard duty - 1.64 cu. Ft. capacity heaped 160 73 $609
800M017 30" Standard duty - 1.98 cu. Ft. capacity heaped 170 77 $648
800M018 30" Square hole bucket - 1.77 cu. Ft. capacity heaped 170 77 $620
800M019 35" Ditching - 2.75 cu. Ft. capacity heaped 180 82 $585
800M020 39" Ditching - 3.07 cu. Ft capacity heaped 190 86 $684
800M021 Trapezoidal Bucket 180 82 $1,464
OTHER OPTIONS
800J013 Rotating Beacon 2 1 $85
800L015 Parts Book - North American Builds 2 1 $85
800L019 Tool kit including grease gun and spanner wrenches 10 5 $85
800L025 Battery Isolator 2 1 $113
EXCAVATOR QUICK HITCH
800M023 Mechanical Quick Hitch for dipper mounted attachments 150 68 $1,438
800M024 Pin set required to connect attachment to Quick Hitch 10 5 $44
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8018
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER
TO TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 5 8018 USD Prices Page
JCB MINI EXCAVATOR
8025Z
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
8025Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE 1.49 liter (92 CID), Interim Tier IV compliant 28 gross/26.8 SAE net horsepower, Perkins engine,
centrifugal dry type air cleaner. Water separator, spin on oil filter, thermostart assist,
antifreeze protection to -35 degrees F.
TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors
and gearbox. Two speed travel 1.5 mph and 2.7 mph.
TRACKS 10 inch rubber tracks (optional steel tracks) with 3 rollers per side result in 4.5 psi
ground pressure. 12 inches of ground clearance
ELECTRICAL 12 volt system with 65 amp alternator, 475 CCA heavy duty battery. Waterproof
wire harness connectors
EXCAVATOR
Pattern Control (JCB Plus and ISO) activated via electric toggle switch. Auxiliary circuit
provides 15.3 GPM for JCB hydraulic breakers and other approved attachments.
Boom swing left 45 degree, right 60 degree. Less excavator bucket. Single Acting
Hydraulics Standard fit.
CANOPY Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Vinyl suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.
CAB (OPTIONAL) Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Cloth suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Enclosed cab is equipped with heater/defroster, windshield wiper, front and side opening windows.
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.
8' 5" Max. dig depth with standard 3'7" dipper. Servo controls, with selectable DPC - Dual
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 2 of 5 8025Z MINI USD Price Page
8025Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8425A 8425BSALES 8025Z 8025Z
CODE ITEM CAB CANOPY
8428 8025Z Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net)
800A405 Cab TOPS/FOPS/FOGS certified with Heater
800A407 Canopy TOPS/FOPS/FOGS certified
800B418 Rubber Tracks - 10 inch width, Bridgestone
800C407 Dual Pattern Control (DPC) system - ISO to SAE
800D404 Suspension seat - Vinyl
800D405 Suspension seat - Fabric
800E426 American language pack
800F404 Standard Dipper 43.3" (1100mm)
800G402 Long dozer blade (Extends dozer blade reach by 9 inches)
800H407 Double acting auxiliary hydraulic circuit with change over valve
800J407 Front work lights (cab mounted)
800J409 Front work lights (canopy mounted)
800K403 FOGS guard kit
Shipping Weight - Lbs. 6,117 5,955
Shipping Weight - Kgs. 2,801 2,701
SUGGESTED LIST PRICE $39,036 $37,414
Select one of the following machine PACKAGE BUILD codes. Package build configurations cannot normally be changed. If a
Package Build does not meet your requirements please order a machine using the Custom Build Section. Attachments &
Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 8025Z MINI USD Price Page
8025Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
8428 8025Z Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net) 4,359 2,002 $34,136
OPERATOR'S AREA (E)
800A405 Cab TOPS/FOPS/FOGS certified with Heater 524 238 $3,036
800A407 Canopy TOPS/FOPS/FOGS certified 313 142 $1,413
UNDERCARRIAGE (E)
800B418 Rubber Tracks - 10 inch width, Bridgestone 175 80 $386
800B419 Steel Tracks - 10 inch width 241 110 $1,352
CONTROLS (E)
800C407 Dual Pattern Control (DPC) system - ISO to SAE 25 11 $442
SEATS (E)
800D404 Suspension seat - Vinyl 48 22 $259
800D405 Suspension seat - Fabric 48 22 $259
OPERATORS HANDBOOK (E)
800E426 American language pack - - $0
800E420 Spanish language pack - - $0
DIPPER (E)
800F404 Standard Dipper 43.3" (1100mm) 524 238 $0
DOZER BLADE (E)
800G400 Standard dozer blade (5' 1" wide) 350 159 $0
800G402 Long dozer blade (Extends dozer blade reach by 9 inches) 400 182 $310
OPERATORS COMPARTMENT (E)
800K403 FOGS guard kit 42 19 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
800H407 Double acting auxiliary hydraulic circuit with change over valve 18 8 $324
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 5 8025Z MINI USD Price Page
8025Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS **
800L416 Panolin 46 Biodegradable Oil 30 14 $764
800J407 Front work lights (cab mounted) 2 1 $143
800J409 Front work lights (canopy mounted) 2 1 $143
800J405 Beacon - Amber rotating - 12v 2 1 $204
800L413 External mirror - cab mounted 1 0 $84
800L412 Travel Alarm 5 2 $378
800L419 Toolkit 5 2 $59
800L423 Battery Isolator 2 1 $271
EXCAVATOR & BUCKET OPTIONS (not compatible with Quickhitch)
800M410 9" Standard duty - 0.83 cu. Ft capacity 106 48 $585
800M411 12" Standard duty - 1.16 cu. Ft capacity 128 58 $630
800M412 18" Standard duty - 1.91 cu. Ft capacity 157 71 $718
800M413 24" Standard duty - 2.62 cu. Ft capacity 190 86 $817
800M414 30" Standard duty - 3.33 cu. Ft capacity 220 100 $883
800M415 39" Ditching Bucket - 5.07 cu. Ft capacity 170 77 $733
EXCAVATOR & BUCKET OPTIONS (Quickhitch compatible)
800M420 9" Standard duty - 0.83 cu. Ft capacity 106 48 $585
800M421 12" Standard duty - 1.16 cu. Ft capacity 128 58 $630
800M422 18" Standard duty - 1.91 cu. Ft capacity 157 71 $718
800M423 24" Standard duty - 2.62 cu. Ft capacity 190 86 $817
800M424 30" Standard duty - 3.33 cu. Ft capacity 220 100 $883
EXCAVATOR QUICK HITCH
800M409 Mechanical quick hitch 100 84 $1,182
800M426 Pin set required to connect attachments to the quick hitch (840M409) 30 14 $78
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER
TO TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8025Z
All prices and specifications subject to change without notice page 5 of 5 8025Z MINI USD Price Page
JCB MINI EXCAVATOR
8029
EFFECTIVE: NOVEMBER 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
8029 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 1, 2013
STANDARD EQUIPMENT
ENGINE 1.49 liter (92 CID), Interim Tier IV compliant 28 gross/26.8 SAE net horsepower, Perkins engine,
centrifugal dry type air cleaner. Water separator, spin on oil filter, thermostart assist,
antifreeze protection to -35 degrees F.
TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors
and gearbox. Two speed travel 1.5 mph and 2.7 mph.
TRACKS 10 inch rubber tracks (optional steel tracks) with 3 rollers per side result in 4.5 psi
ground pressure. 12 inches of ground clearance
ELECTRICAL 12 volt system with 65 amp alternator, 475 CCA heavy duty battery. Waterproof
wire harness connectors
EXCAVATOR
Pattern Control (JCB Plus and ISO) activated via electric toggle switch. Auxiliary circuit
provides 15.3 GPM for JCB hydraulic breakers and other approved attachments.
Boom swing left 45 degree, right 60 degree. Less excavator bucket. Single Acting
Hydraulics Standard fit.
CANOPY Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Vinyl suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.
CAB (OPTIONAL) Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Cloth suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Enclosed cab is equipped with heater/defroster, windshield wiper, front and side opening windows.
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Convention tailswing allows for operation in tight areas.
8' 5" Max. dig depth with standard 3'7" dipper. Servo controls, with selectable DPC - Dual
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
8029 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8429A 8429BSALES 8029 8029
CODE ITEM CAB CANOPY
8429 8029 Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net)
800A426 Cab TOPS/FOPS/FOGS certified with Heater
800A427 Canopy TOPS/FOPS/FOGS certified
800B418 Rubber Tracks - 10 inch width, Bridgestone
800C407 Dual Pattern Control (DPC) system - ISO to SAE
800D404 Suspension seat - Vinyl
800D405 Suspension seat - Fabric
800E426 American language pack
800F404 Standard Dipper 43.3" (1100mm)
800G402 Long dozer blade (Extends dozer blade reach by 9 inches)
800H407 Double acting auxiliary hydraulic circuit with change over valve
800J407 Front work lights (cab mounted)
800J409 Front work lights (canopy mounted)
800K403 FOGS guard kit
Shipping Weight - Lbs. 6,117 5,955
Shipping Weight - Kgs. 2,801 2,701
SUGGESTED LIST PRICE $39,036 $37,414
Select one of the following machine PACKAGE BUILD codes. Package build configurations cannot normally be changed. If a
Package Build does not meet your requirements please order a machine using the Custom Build Section. Attachments &
Options Sections following.
8029 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
8428 8029 Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net) 4,359 2,002 $34,136
OPERATOR'S AREA (E)
800A405 Cab TOPS/FOPS/FOGS certified with Heater 524 238 $3,036
800A407 Canopy TOPS/FOPS/FOGS certified 313 142 $1,413
UNDERCARRIAGE (E)
800B418 Rubber Tracks - 10 inch width, Bridgestone 175 80 $386
800B419 Steel Tracks - 10 inch width 241 110 $1,352
CONTROLS (E)
800C407 Dual Pattern Control (DPC) system - ISO to SAE 25 11 $442
SEATS (E)
800D404 Suspension seat - Vinyl 48 22 $259
800D405 Suspension seat - Fabric 48 22 $259
OPERATORS HANDBOOK (E)
800E426 American language pack - - $0
800E420 Spanish language pack - - $0
DIPPER (E)
800F404 Standard Dipper 43.3" (1100mm) 524 238 $0
DOZER BLADE (E)
800G400 Standard dozer blade (5' 1" wide) 350 159 $0
800G402 Long dozer blade (Extends dozer blade reach by 9 inches) 400 182 $310
OPERATORS COMPARTMENT (E)
800K403 FOGS guard kit 42 19 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
800H407 Double acting auxiliary hydraulic circuit with change over valve 18 8 $324
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
8029 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS **
800L416 Panolin 46 Biodegradable Oil 30 14 $764
800J407 Front work lights (cab mounted) 2 1 $143
800J409 Front work lights (canopy mounted) 2 1 $143
800J405 Beacon - Amber rotating - 12v 2 1 $204
800L413 External mirror - cab mounted 1 0 $84
800L412 Travel Alarm 5 2 $378
800L419 Toolkit 5 2 $59
800L423 Battery Isolator 2 1 $271
EXCAVATOR & BUCKET OPTIONS (not compatible with Quickhitch)
800M410 9" Standard duty - 0.83 cu. Ft capacity 106 48 $585
800M411 12" Standard duty - 1.16 cu. Ft capacity 128 58 $630
800M412 18" Standard duty - 1.91 cu. Ft capacity 157 71 $718
800M413 24" Standard duty - 2.62 cu. Ft capacity 190 86 $817
800M414 30" Standard duty - 3.33 cu. Ft capacity 220 100 $883
800M415 39" Ditching Bucket - 5.07 cu. Ft capacity 170 77 $733
EXCAVATOR & BUCKET OPTIONS (Quickhitch compatible)
800M420 9" Standard duty - 0.83 cu. Ft capacity 106 48 $585
800M421 12" Standard duty - 1.16 cu. Ft capacity 128 58 $630
800M422 18" Standard duty - 1.91 cu. Ft capacity 157 71 $718
800M423 24" Standard duty - 2.62 cu. Ft capacity 190 86 $817
800M424 30" Standard duty - 3.33 cu. Ft capacity 220 100 $883
EXCAVATOR QUICK HITCH
800M409 Mechanical quick hitch 100 84 $1,182
800M426 Pin set required to connect attachments to the quick hitch (840M409) 30 14 $78
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER
TO TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8026
JCB MINI EXCAVATOR
8030Z
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
8030Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE 1.49 liter (92 CID), Interim Tier IV compliant 28 gross/26.6 SAE net horsepower, Perkins engine,
centrifugal dry type air cleaner. Water separator, spin on oil filter, thermostart assist,
antifreeze protection to -35 degrees F.
TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors
and gearbox. Two speed travel 1.5 mph and 2.7 mph.
TRACKS 12 inch rubber tracks (optional steel tracks) with 4 rollers per side result in 4.8 psi
ground pressure. 12 inches of ground clearance
ELECTRICAL 12 volt system with 65 amp alternator, 475 CCA heavy duty battery. Waterproof
wire harness connectors
EXCAVATOR
Pattern Control (SAE and ISO) activated via electric toggle switch. Auxiliary circuit
provides 15.3 GPM for JCB hydraulic breakers and other approved attachments.
Boom swing left 45 degree, right 60 degree. Less excavator bucket. Single Acting
Hydraulics Standard fit.
CANOPY Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Vinyl suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.
CAB (OPTIONAL) Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Cloth suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Enclosed cab is equipped with heater/defroster, windshield wiper, front and side opening windows.
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.
9' 2" Max. dig depth with standard 4'3" dipper. Servo controls, with selectable DPC - Dual
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 2 of 5 8030Z MINI USD Price Page
8030Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8430A 8430BSALES 8030Z 8030Z
CODE ITEM CAB CANOPY
8432 8030Z Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net)
800A408 Cab TOPS/FOPS/FOGS certified with Heater and Air Conditioning
800A407 Canopy TOPS/FOPS/FOGS certified
800B402 Rubber Tracks - 12 inch width
800C409 Dual Pattern Control (DPC) system - ISO to SAE
800D400 Suspension seat - Vinyl
800D401 Suspension seat - Fabric
800E426 American language pack
800F405 Standard Dipper 51.2" (1300mm)
800G401 Standard dozer blade (5' 1" wide)
800H406 Double acting auxiliary hydraulic circuit with change over valve
800J407 Front work lights (cab mounted)
800J409 Front work lights (canopy mounted)
800K403 FOGS guard kit
Shipping Weight - Lbs. 7,266 7,046
Shipping Weight - Kgs. 3,296 3,196
SUGGESTED LIST PRICE $45,374 $40,494
Select one of the following machine PACKAGE BUILD codes. Package Build configurations cannot normally be changed. If a
Package Build does not meet your requirements please order a machine using the Custom Build Section, Attachments &
Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 8030Z MINI USD Price Page
8030Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
8432 8030Z Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net) 5,697 2,590 $37,526
OPERATOR'S AREA (E)
800A405 Cab TOPS/FOPS/FOGS certified with Heater 524 238 $3,036
800A407 Canopy TOPS/FOPS/FOGS certified 313 142 $1,413
800A408 Cab TOPS/FOPS/FOGS certified with Heater and Air Conditioning 385 175 $6,294
UNDERCARRIAGE (E)
800B402 Rubber Tracks - 12 inch width 175 80 $386
800B412 Steel Tracks - 12 inch width 241 110 $1,352
CONTROLS (E)
800C409 Dual Pattern Control (DPC) system - ISO to SAE 25 11 $442
SEATS (E)
800D400 Suspension seat - Vinyl 48 22 $259
800D401 Suspension seat - Fabric 48 22 $259
OPERATORS HANDBOOK (E)
800E426 American language pack - - $0
800E420 Spanish language pack - - $0
DIPPER (E)
800F405 Standard Dipper 51.2" (1300mm) 524 238 $0
DOZER BLADE (E)
800G401 Standard dozer blade (5' 1" wide) 350 159 $0
OPERATORS COMPARTMENT (E)
800K403 FOGS guard kit 42 19 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
800H406 Double acting auxiliary hydraulic circuit with change over valve 18 8 $324
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 5 8030Z MINI USD Price Page
8030Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS **
800L416 Panolin 46 Biodegradable Oil 30 14 $764
800J407 Front work lights (cab mounted) 2 1 $143
800J405 Beacon - Amber rotating - 12v 2 1 $204
800J409 Front work lights (canopy mounted) 2 1 $143
800L412 Travel Alarm 5 2 $378
800L413 External mirror - cab mounted 1 0 $84
800L419 Toolkit 5 2 $59
800L423 Battery Isolator 2 1 $271
EXCAVATOR & BUCKET OPTIONS (not compatible with Quickhitch)
800M320 9" Standard duty - 0.83 cu. Ft capacity 106 48 $585
800M330 12" Standard duty - 1.16 cu. Ft capacity 128 58 $630
800M350 18" Standard duty - 1.91 cu. Ft capacity 157 71 $718
800M370 24" Standard duty - 2.62 cu. Ft capacity 190 86 $817
800M311 30" Standard duty - 3.33 cu. Ft capacity 220 100 $883
800M313 47" Ditching Bucket - 5.07 cu. Ft capacity 170 77 $733
EXCAVATOR & BUCKET OPTIONS (Quickhitch compatible)
800M321 9" Standard duty - 0.83 cu. Ft capacity 106 48 $585
800M331 12" Standard duty - 1.16 cu. Ft capacity 128 58 $630
800M351 18" Standard duty - 1.91 cu. Ft capacity 157 71 $718
800M371 24" Standard duty - 2.62 cu. Ft capacity 190 86 $817
800M372 30" Standard duty - 3.33 cu. Ft capacity 220 100 $883
EXCAVATOR QUICK HITCH
800M409 Mechanical quick hitch 100 84 $1,182
800M426 Pin set required to connect attachments to the quick hitch (840M409) 30 14 $78
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER
TO TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8030Z
All prices and specifications subject to change without notice page 5 of 5 8030Z MINI USD Price Page
JCB MINI EXCAVATOR
8035Z
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
8035Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE 1.66 liter (101 CID), Interim Tier IV compliant 31.6 gross/30.4 SAE net horsepower, Perkins engine,
centrifugal dry type air cleaner. Water separator, spin on oil filter, thermostart assist,
antifreeze protection to -35 degrees F.
TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors
and gearbox. Two speed travel 1.5 mph and 2.7 mph.
TRACKS 12 inch rubber tracks (optional steel tracks) with 4 rollers per side result in 5.2 psi
ground pressure. 12 inches of ground clearance
ELECTRICAL 12 volt system with 65 amp alternator, 475 CCA heavy duty battery. Waterproof
wire harness connectors
EXCAVATOR
Pattern Control (SAE and ISO) activated via electric toggle switch. Auxiliary circuit
provides 18.2 GPM for JCB hydraulic breakers and other approved attachments.
Boom swing left 45 degree, right 60 degree. Less excavator bucket. Single Acting
Hydraulics Standard fit with optional double acting auxiliary hydraulics.
CANOPY Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Vinyl suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.
CAB (OPTIONAL) Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Cloth suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Enclosed cab is equipped with heater/defroster, windshield wiper, front and side opening windows.
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.
10' 5" Max. dig depth with standard 5' dipper. Servo controls, with selectable DPC - Dual
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 2 of 5 8035Z MINI USD Price Page
8035Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8435A 8435B
SALES 8035Z 8035Z
CODE ITEM CAB CANOPY
8436 8035Z Base Machine (3 cylinder 1.7 liter Perkins Diesel engine, 31.6 HP Gross / 30.4 HP Net)
800A405 Cab TOPS/FOPS/FOGS certified with Heater
800A407 Canopy TOPS/FOPS/FOGS certified
800B405 Rubber Tracks - 12 inch width
800C412 Dual Pattern Control (DPC) system - ISO to SAE
800D400 Suspension seat - Vinyl
800D401 Suspension seat - Fabric
800E426 American language pack
800F406 Standard Dipper 60" (1530mm)
800G401 Standard dozer blade (5' 1" wide)
800H406 Double acting auxiliary hydraulic circuit with change over valve
800J407 Front work lights (cab mounted)
800J409 Front work lights (canopy mounted)
800K403 FOGS guard kit
Shipping Weight - Lbs. 7,938 7,727
Shipping Weight - Kgs. 3,601 3,505
SUGGESTED LIST PRICE ** $47,006 $45,383
Select one of the following machine PACKAGE BUILD codes. Package Build configurations cannot normally be changed. If a
Package Build does not meet your requirements please order a machine using the Custom Build Section, Attachments &
Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 8035Z MINI USD Price Page
8035Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
8436 8035Z Base Machine (3 cylinder 1.7 liter Perkins Diesel engine, 31.6 HP Gross / 30.4 HP Net) 6,230 2,832 $42,416
OPERATOR'S AREA (E)
800A405 Cab TOPS/FOPS/FOGS certified with Heater 524 238 $3,036
800A407 Canopy TOPS/FOPS/FOGS certified 313 142 $1,413
800A414 Cab TOPS/FOPS/FOGS certified with Heater and Air Conditioning 575 261 $6,293
UNDERCARRIAGE (E)
800B405 Rubber Tracks - 12 inch width 175 80 $386
800B406 Steel Tracks - 12 inch width 241 110 $1,352
CONTROLS (E)
800C412 Dual Pattern Control (DPC) system - ISO to SAE 25 11 $442
SEATS (E)
800D400 Suspension seat - Vinyl 48 22 $259
800D401 Suspension seat - Fabric 48 22 $259
OPERATORS HANDBOOK (E)
800E426 American language pack - - $0
800E420 Spanish language pack - - $0
DIPPER (E)
800F406 Standard Dipper 60" (1530mm) 524 238 $0
DOZER BLADE (E)
800G401 Standard dozer blade (5' 1" wide) 350 159 $0
OPERATORS COMPARTMENT (E)
800K403 FOGS guard kit 42 19 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
800H405 Double acting auxiliary hydraulic circuit with change over valve 18 8 $324
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 5 8035Z MINI USD Price Page
8035Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
800L416 Panolin 46 Biodegradable Oil 30 14 $764
800J407 Front work lights (cab mounted) 2 1 $143
800J409 Front work lights (canopy mounted) 2 1 $143
800J405 Beacon - Amber rotating - 12v 2 1 $204
800L412 Travel Alarm 5 2 $378
800L413 External mirror - cab mounted 1 0 $84
800L419 Toolkit 5 2 $59
800L423 Battery Isolator 2 1 $271
EXCAVATOR & BUCKET OPTIONS (not compatible with Quickhitch)
800M320 9" Standard duty - 0.83 cu. Ft capacity 106 48 $585
800M330 12" Standard duty - 1.16 cu. Ft capacity 128 58 $630
800M350 18" Standard duty - 1.91 cu. Ft capacity 157 71 $718
800M370 24" Standard duty - 2.62 cu. Ft capacity 190 86 $817
800M311 30" Standard duty - 3.33 cu. Ft capacity 220 100 $883
800M313 47" Ditching Bucket - 5.07 cu. Ft capacity 170 77 $733
EXCAVATOR & BUCKET OPTIONS (Quickhitch compatible)
800M321 9" Standard duty - 0.83 cu. Ft capacity 106 48 $585
800M331 12" Standard duty - 1.16 cu. Ft capacity 128 58 $630
800M351 18" Standard duty - 1.91 cu. Ft capacity 157 71 $718
800M371 24" Standard duty - 2.62 cu. Ft capacity 190 86 $817
800M372 30" Standard duty - 3.33 cu. Ft capacity 220 100 $883
EXCAVATOR QUICK HITCH
800M409 Mechanical quick hitch 100 84 $1,182
800M426 Pin set required to connect attachments to the quick hitch (840M409) 30 14 $78
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER
TO TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8035Z
All prices and specifications subject to change without notice page 5 of 5 8035Z MINI USD Price Page
JCB MINI EXCAVATOR
8040Z
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
8040Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE 2.2 liter (134 CID), Interim Tier IV compliant 45 SAE net horsepower, Perkins engine, centrifugal dry
type air cleaner. Water separator, spin on oil filter, thermostart assist, antifreeze protection
to -35 degrees F.
TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors
and gearbox. Two speed travel 1.7 mph and 3.4 mph.
TRACKS 16 inch rubber tracks (optional steel tracks) with 4 rollers per side result in 4.12 psi
ground pressure. 13.5 inches of ground clearance
ELECTRICAL 12 volt system with 65 amp alternator, 410 CCA heavy duty battery. Waterproof
wire harness connectors
EXCAVATOR 10' 11" Max. dig depth with standard 5' thumb compatible dipper. Servo controls, with
selectable DPC - Dual Pattern Control (SAE and ISO) activated via electric toggle switch.
Auxiliary circuit provides 23.8 GPM for JCB hydraulic breakers and other approved attachments.
Boom swing left 60 degree, right 65 degree. Less excavator bucket. Thumb mounting bracket
Single Acting Hydraulics Standard fit.
CANOPY Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Vinyl suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.
CAB (OPTIONAL) Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Cloth suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Enclosed cab is equipped with heater/defroster, windshield wiper, front and side opening windows.
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 2 of 5 8040 MINI USD Price Page
8040 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8440A 8440BSALES 8040Z 8040Z
CODE ITEM CAB CANOPY
8441 8040 Base machine (4 cylinder Perkins diesel engine, 46.4 hp gross / 45 hp net)
840A005 Cab TOPS/FOPS/FOGS certified with Air Conditioning
840A002 Canopy TOPS/FOPS/FOGS certified
840B001 Rubber Tracks - 16" width
840C002
840D002 Suspension seat - Vinyl
840D001 Suspension seat - Fabric
840E002 American language pack
840F003 Standard Dipper 60" (1525mm) - Thumb ready
840G001 Standard dozer blade (6' 6" wide)
840H001 Double acting auxiliary hydraulic circuit
840J001 Front work lights (2 each - cab and canopy mounted)
840J003 Rear worklight (1 each - cab and canopy mounted)
840K002 FOGS guard kit
Shipping Weight - Lbs. 9,160 9,018
Shipping Weight - Kgs. 4,155 4,091
SUGGESTED LIST PRICE $59,164 $53,448
Dual Pattern Control (DPC) system - ISO to SAE - mechanical foot controlled
proportional auxiliary
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using
the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 8040 MINI USD Price Page
8040 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
8441 8040 Base machine (4 cylinder Perkins diesel engine, 46.4 hp gross / 45 hp net) 6,669 3,031 $50,195
OPERATOR'S AREA (E)
840A001 Cab TOPS/FOPS/FOGS certified 760 345 $4,955
840A002 Canopy TOPS/FOPS/FOGS certified 640 291 $1,801
840A005 Cab TOPS/FOPS/FOGS certified with Air Conditioning 782 345 $7,517
UNDERCARRIAGE (E)
840B001 Rubber Tracks - 16" width 457 207 $393
840B002 Steel Tracks - 16" width 336 152 $1,381
CONTROLS (E)
840C002 40 18 $368
840C006 40 18 $1,898
840C010 40 18 $1,898
SEATS (E)
840D001 Suspension seat - Fabric 125 57 $0
840D002 Suspension seat - Vinyl 125 57 $0
OPERATORS HANDBOOK (E)
840E002 American language pack - - $0
840E006 Spanish language pack - - $0
DIPPER (E)
840F003 Standard Dipper 60" (1525mm) - Thumb ready 365 166 $0
DOZER BLADE (E)
840G001 Standard dozer blade (6' 6" wide) 600 273 $0
OPERATORS COMPARTMENT (E)
840K002 FOGS guard kit 79 36 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
840H001 Double acting auxiliary hydraulic circuit 30 14 $473
Dual Pattern Control (DPC) system - ISO to SAE - mechanical foot controlled proportional auxiliary
Dual Pattern Control (DPC) system - one joystick mounted electronic proportional auxiliary (cab
builds)
Dual Pattern Control (DPC) system - one joystick mounted electronic proportional auxiliary
(canopy builds)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 5 8040 MINI USD Price Page
8040 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS **
840L007 Panolin Biodegradable Oil 7 3 $1,970
840J001 Front work lights (2 each - cab and canopy mounted) 10 5 $146
840J002 Beacon - Amber rotating - 12v 5 2 $213
840J003 Rear worklight (1 each - cab and canopy mounted) 3 1 $71
840L004 External mirror - cab mounted 2 1 $86
840L015 Yellow roof moulding 15 7 $1,070
840L009 Toolkit 2 1 $60
840L003 Travel alarm 0 1 $378
840L017 Battery isolator 0 1 $320
EXCAVATOR & BUCKET OPTIONS (Quickhitch compatible)
840M001 9" Standard duty - 1.08 cu. Ft capacity 90 41 $597
840M002 12" Standard duty - 1.61 cu. Ft capacity 110 50 $641
840M003 18" Standard duty - 2.76 cu. Ft capacity 135 61 $731
840M004 24" Standard duty - 3.85 cu. Ft capacity 160 73 $833
840M005 30" Standard duty - 5.07 cu. Ft capacity 170 77 $901
840M006 47" Ditching bucket - 4.20 cu. Ft capacity 190 86 $749
EXCAVATOR QUICK HITCH
840M007 Mechanical quick hitch 185 84 $1,657
840M011 Pin set required to connect attachments to the quick hitch (840M007) 30 14 $104
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8040Z
All prices and specifications subject to change without notice page 5 of 5 8040 MINI USD Price Page
JCB MINI EXCAVATOR
8045Z
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 1 of 5 8045 MINI USD Price Page
8045Z MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: MAY 1,
2013
STANDARD EQUIPMENT
ENGINE 2.2 liter (134 CID), Interim Tier IV compliant 45 SAE net horsepower, Perkins engine, centrifugal dry
type air cleaner. Water separator, spin on oil filter, thermostart assist, antifreeze protection
to -35 degrees F.
TRANSMISSIONIndependent left and right track control. Hydraulic pumps drive integral track motors
and gearbox. Two speed travel 1.7 mph and 3.4 mph.
TRACKS 16 inch rubber tracks (optional steel tracks) with 5 rollers per side result in 4.27 psi
ground pressure. 13.5 inches of ground clearance
ELECTRICAL12 volt system with 65 amp alternator, 410 CCA heavy duty battery. Waterproof
wire harness connectors
EXCAVATOR11' 7" Max. dig depth with standard 5'8" thumb compatible dipper. Servo controls, with selectable
DPC - Dual Pattern Control (SAE and ISO) activated via electric toggle switch. Auxiliary circuit
provides 23.8 GPM for JCB hydraulic breakers and other approved attachments. Boom swing
left 60 degree, right 65 degree. Less excavator bucket. Thumb mounting bracket; Single Acting
Hydraulics Standard fit.
CANOPY Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Vinyl suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.
CAB (OPTIONAL)Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Cloth suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Enclosed cab is equipped with heater/defroster, windshield wiper, front and side opening windows.
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 2 of 5 8045 MINI USD Price Page
8045 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8445A 8445B
SALES 8045Z 8045Z
CODE ITEM CAB CANOPY
8446 8045 Base machine (4 cylinder Perkins diesel engine, 46.4 hp gross / 45 hp net)
840A002 Canopy TOPS/FOPS/FOGS certified
840A005 Cab TOPS/FOPS/FOGS certified with Air Conditioning
840B003 Rubber Tracks - 16" width
840C004
840D002 Suspension seat - Vinyl
840D001 Suspension seat - Fabric
840E002 American language pack
840F004 Standard Dipper 68" (1725mm) - Thumb ready
840G001 Standard dozer blade (6' 6" wide)
840H001 Double acting auxiliary hydraulic circuit
840J001 Front work lights (2 each - cab and canopy mounted)
840J003 Rear worklight (1 each - cab and canopy mounted)
840K002 FOGS guard kit
Shipping Weight - Lbs. 10,472 10,330
Shipping Weight - Kgs. 4,750 4,686
SUGGESTED LIST PRICE $64,621 $58,905
Dual Pattern Control (DPC) system - ISO to SAE - mechanical foot controlled
proportional auxiliary
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements
please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 8045 MINI USD Price Page
8045 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
8446 8045 Base machine (4 cylinder Perkins diesel engine, 46.4 hp gross / 45 hp net) 7,981 $55,652
OPERATOR'S AREA (E)
840A001 Cab TOPS/FOPS/FOGS certified 760 $4,955
840A002 Canopy TOPS/FOPS/FOGS certified 640 $1,801
840A005 Cab TOPS/FOPS/FOGS certified with Air Conditioning 782 $7,517
UNDERCARRIAGE (E)
840B003 Rubber Tracks - 16" width 457 $393
840B004 Steel Tracks - 16" width 336 $1,381
CONTROLS (E)
840C004 40 $368
840C008 40 $1,898
840C012 40 $1,898
SEATS (E)
840D001 Suspension seat - Fabric 125 $0
840D002 Suspension seat - Vinyl 125 $0
OPERATORS HANDBOOK (E)
840E002 American language pack - - $0
840E006 Spanish language pack - - $0
DIPPER (E)
840F004 Standard Dipper 68" (1725mm) - Thumb ready 365 $0
DOZER BLADE (E)
840G001 Standard dozer blade (6' 6" wide) 600 $0
OPERATORS COMPARTMENT (E)
840K002 FOGS guard kit 79 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
840H001 Double acting auxiliary hydraulic circuit 30 $473
Dual Pattern Control (DPC) system - ISO to SAE - mechanical foot controlled proportional
auxiliary
Dual Pattern Control (DPC) system - one joystick mounted electronic proportional auxiliary
(cab builds)
Dual Pattern Control (DPC) system - one joystick mounted electronic proportional auxiliary
(canopy builds)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 5 8045 MINI USD Price Page
8045 MINI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHTU.S.
CODE ITEM (lbs.) (kgs.)LIST
OTHER HYDRAULIC OPTIONS
840L007 Panolin Biodegradable Oil 7 $1,970
840H002 Bucket to Grab change over 0 $658
OPERATORS COMPARTMENT OPTIONS **
840J001 Front work lights (2 each - cab and canopy mounted) 10 $146
840J002 Beacon - Amber rotating - 12v 5 $213
840J003 Rear worklight (1 each - cab and canopy mounted) 3 $71
840L004 External mirror - cab mounted 2 $86
840L015 Yellow roof moulding 15 $1,070
840L009 Toolkit 2 $60
840L003 Travel alarm 0 $378
840L017 Battery isolator 0 $320
EXCAVATOR & BUCKET OPTIONS (Quickhitch compatible)
840M001 9" Standard duty - 1.08 cu. Ft capacity 90 $597
840M002 12" Standard duty - 1.61 cu. Ft capacity 110 $641
840M003 18" Standard duty - 2.76 cu. Ft capacity 135 $731
840M004 24" Standard duty - 3.85 cu. Ft capacity 160 $833
840M005 30" Standard duty - 5.07 cu. Ft capacity 170 $901
840M006 47" Ditching bucket - 4.20 cu. Ft capacity 190 $749
EXCAVATOR QUICK HITCH
840M007 Mechanical quick hitch 185 $1,657
840M011 Pin set required to connect attachments to the quick hitch (840M007) 30 $104
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH
JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS
AND REFER TO TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8045Z
All prices and specifications subject to change without notice page 5 of 5 8045 MINI USD Price Page
JCB MIDI EXCAVATOR
8055
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
8055 MIDI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE Isuzu 2.2L (128 CID), interim Tier IV compliant 46 SAE net hp diesel engine, centrifugal dry type air cleaner.
Water separator, spin-on oil filter, thermostart assist, antifreeze protection to -35 degrees F.
TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors and gearbox.
Two speed travel 1.7 mph and 3.2 mph.
TRACKS Rubber (optional steel) grease adjusted. Under carriage rollers 5 per side. Track width 15.75".
Ground pressure 4.7 lb. per square inch. Ground clearance 13.0".
ELECTRICAL 12 volt, with 80 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness connectors.
EXCAVATOR Max. dig depth with standard 6'3" dipper 12' 4". Servo controls, SAE and ISO patterns both
available on 8055 Midi Excavator with DPC - Dual Pattern Control system. Auxiliary circuit
provides 37 GPM for JCB hydraulic breakers and other approved attachments. Dozer control.
Boom swing left 60 degree, right 65 degree. Less excavator bucket. Single Acting
Hydraulics Standard fit.
CAB Meets SAE TOPS/FOPS/FOGS requirements, left side entry Cab equipped with fabric suspension seat
and is adjustable forward and aft comes equipped with heater, wiper, front and side opening windows.
8055 MIDI is available as RTS with 1.5" minimal tailswing for operation in very tight, confining areas.
This design does not compromise serviceability or ergonomics of operator compartment.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 2 of 5 8055 MIDI USD Price Page
8055 MIDI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8550ASALES 8055 RTS
CODE ITEM CAB
8551 8055RTS Midi Base Machine ( 46 hp net, 4cyl. engine)
850A157 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning
850B500 Rubber tracks 16" wide
850C103 DPC - Dual Pattern Control System - ISO to SAE - mechanical foot controlled proportional auxiliary
850D110 Suspension seat fabric
850E152 American operator handbook
850F104 Standard dipper 74.8" (1900mm) dig depth 13' 1"
850G100 Standard dozer blade
850H501 Double acting hyd. circuit (suitable for jaw bucket or auger)
850J110 Cab front work lights
850J111 Cab rear work lights
850K521 FOGS Guard kit
Shipping Weight - Lbs. 11,081
Shipping Weight - Kgs. 5,026
SUGGESTED LIST PRICE $69,186
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using
the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 8055 MIDI USD Price Page
8055 MIDI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
8551 8055RTS Midi Base Machine ( 46 hp net, 4cyl. engine) 10,238 4,654 $60,878
OPERATOR'S AREA (E)
850A157 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning 250 114 $4,457
UNDERCARRIAGE (E)
850B500 Rubber tracks 16" wide 210 95 $1,672
850B510 Steel tracks 16" wide 290 132 $2,230
850B532 Bridgestone Geogrip Rubber Tracks 16" wide 290 132 $7,161
CONTROLS (E)
850C103 50 23 $0
850C105 50 23 $1,671
SEATS (E)
850D110 Suspension seat fabric 8 4 $0
OPERATORS HANDBOOK (E)
850E152 American operator handbook 0 0 $0
DIPPER (E)
850F104 Standard dipper 74.8" (1900mm) dig depth 13' 1" 0 0 $1,045
850F105 Short dipper 59" (1900mm) dig depth 11' 9" 0 0 $940
DOZER BLADE (E)
850G100 Standard dozer blade 275 125 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
850H501 Double acting hyd. circuit (suitable for jaw bucket or auger) 30 14 $473
DPC - Dual Pattern Control System - ISO to SAE - mechanical foot controlled proportional auxiliary
DPC - Dual Pattern Control System - ISO to SAE - one joystick mounted electronic proportional
auxiliary (for cab with A/C)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 5 8055 MIDI USD Price Page
8055 MIDI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OTHER HYDRAULIC OPTIONS
850H509 Bucket to Grab changeover 5 2 $658
850M128 5 2 $373
850L527 Panolin biodegradable oil 5 2 $1,970
OPERATORS COMPARTMENT OPTIONS **
850J110 Cab front work lights 10 5 $146
850J111 Cab rear work lights 10 5 $122
850J530 Rotating Beacon 5 2 $213
850K521 FOGS Guard kit 25 11 $391
850L520 Exterior mirror (left hand) 5 2 $86
850L532 Toolkit 4 2 $109
850L533 Travel alarm 0 0 $378
EXCAVATOR & BUCKET OPTIONS
850M120 9" Standard duty - 1.05 cu Ft. capacity heaped 185 84 $909
850M121 12" Standard duty - 1.8 cu. Ft. capacity heaped 154 70 $1,036
850M122 18" Standard duty - 2.8 cu. Ft. capacity heaped 220 100 $1,115
850M123 24" Standard duty - 3.5 cu. Ft. capacity heaped 265 120 $1,201
850M124 30" Standard duty - 4.6 cu. Ft. capacity heaped 310 141 $1,316
850M125 47" Ditching Bucket - 5.5 cu. Ft. capacity heaped 325 147 $1,214
EXCAVATOR QUICK HITCH
850M126 Mechanical Quick Hitch for dipper mounted attachments 185 84 $1,238
850M127 Pin set required to connect attachment to Quick Hitch 30 14 $123
SECTION 4 - ATTACHMENTS
Bucket pin conversion (45mm bush kit) allows pickup of 3CX backhoe loader bucket (derates
machine)
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8055
All prices and specifications subject to change without notice page 5 of 5 8055 MIDI USD Price Page
JCB MIDI EXCAVATOR
8065
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
8065 MIDI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE Isuzu 2.2L (132 CID), interim Tier IV compliant 51.1 SAE net hp (54.3). Isuzu diesel engine, centrifugal dry type
air cleaner. Water separator, spin-on oil filter, thermostart assist, antifreeze protection to -35 degrees F.
and protective guard.
TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors and gearbox.
Two speed travel 1.8 mph and 3.3 mph.
TRACKS Rubber (optional steel) grease adjusted. Under carriage rollers 5 per side. Track width 15.75".
Ground pressure 5.6 lb. per square inch. Ground clearance 13.0".
ELECTRICAL 12 volt, with 80 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness connectors.
EXCAVATOR Max. dig depth with standard 6'3" dipper 13' 4". Servo controls, SAE and ISO patterns both
available on 8065 Midi Excavator with DPC - Dual Pattern Control system. Auxiliary circuit
provides 25 GPM for JCB hydraulic breakers and other approved attachments. Dozer control.
Boom swing left 60 degree, right 65 degree. Less excavator bucket. Double Acting
Hydraulics Standard fit.
CAB (OPTIONAL) Meets SAE TOPS/FOPS/FOGS requirements, left side entry Cab equipped with fabric suspension seat
and is adjustable forward and aft comes equipped with heater, wiper, front and side opening windows.
8065 MIDI is available as RTS with 1.5" minimal tailswing for operation in very tight, confining areas.
This design does not compromise serviceability or ergonomics of operator compartment.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 2 of 5 8055 MIDI USD Price Page
8065 MIDI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8565ASALES 8065 RTS
CODE ITEM CAB
8565 8065RTS Midi Base Machine ( 51.1 hp net, Isuzu Diesel 4cyl. engine)
850A161 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning
850B520 Rubber tracks 16" wide
850C160 DPC - Dual Pattern Control System - ISO to SAE - mechanical foot controlled proportional auxiliary
850D110 Suspension seat fabric
850E152 American operator handbook
850F202 Standard dipper 74.8" (1900mm) dig depth 13' 4"
850G100 Standard dozer blade
850H516 Double acting hyd. circuit (suitable for jaw bucket or auger). Not compatable with 850C166
850J110 Cab front work lights
850J111 Cab rear work lights
850K521 FOGS Guard kit
Shipping Weight - Lbs. 14,570
Shipping Weight - Kgs. 6,609
SUGGESTED LIST PRICE $79,773
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using
the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 8055 MIDI USD Price Page
8065 MIDI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
8565 8065RTS Midi Base Machine ( 51.1 hp net, Isuzu Diesel 4cyl. engine) 14,300 6,486 $71,115
OPERATOR'S AREA (E)
850A161 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning 250 114 $4,508
UNDERCARRIAGE (E)
850B520 Rubber tracks 16" wide 240 109 $1,709
850B530 Steel tracks 16" wide 290 132 $2,335
850B533 Bridgestone Geogrip Rubber Tracks 16" wide 290 132 $7,161
CONTROLS (E)
850C160 50 23 $0
850C162 50 23 $1,671
850C166 60 27 $4,238
SEATS (E)
850D110 Suspension seat fabric 8 4 $0
OPERATORS HANDBOOK (E)
850E152 American operator handbook 0 0 $0
DIPPER (E)
850F202 Standard dipper 74.8" (1900mm) dig depth 13' 4" 0 0 $1,045
DOZER BLADE (E)
850G100 Standard dozer blade 275 275 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
850H516 Double acting hyd. circuit (suitable for jaw bucket or auger). Not compatable with 850C166 30 30 $737
DPC - Dual Pattern Control System - ISO to SAE - mechanical foot controlled proportional auxiliary
DPC - Dual Pattern Control System - ISO to SAE - one joystick mounted electronic proportional
auxiliary
DPC - Dual Pattern Control System - ISO to SAE - double acting and low flow pipework. One
joystick mounted electronic proportional auxiliary and one mechanical foot controlled auxiliary
(includes 850H516)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 5 8055 MIDI USD Price Page
8065 MIDI EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS **
850L527 Panolin biodegradable oil 0 0 $1,970
850J110 Cab front work lights 10 5 $146
850J111 Cab rear work lights 10 5 $122
850J530 Rotating Beacon 5 2 $213
850K521 FOGS Guard kit 25 11 $391
850L520 Exterior mirror (left hand) 5 2 $86
850L532 Toolkit 4 2 $109
850L533 Travel alarm 0 0 $378
EXCAVATOR & BUCKET OPTIONS
850M200 9" Standard duty - 1.75 cu Ft. capacity heaped 140 64 $811
850M201 12" Standard duty - 2.25 cu Ft. capacity heaped 170 77 $894
850M202 14" Standard duty - 2.5 cu Ft. capacity heaped 185 84 $914
850M203 16" Standard duty - 3.0 cu. Ft. capacity heaped 210 95 $985
850M204 18" Standard duty - 3.6 cu. ft. capacity heaped 250 114 $1,035
850M205 24" Standard duty - 5.2 cu. Ft. capacity heaped 265 120 $1,125
850M206 36" Standard bucket - 8.8 cu. Ft. capacity heaped 360 164 $1,351
850M207 60" Grading Bucket - 7.7 cu. Ft. capacity heaped 325 148 $1,140
EXCAVATOR QUICK HITCH
850M111 Mechanical Quick Hitch for dipper mounted attachments (pin set included) 220 100 $1,710
850M113 Pivot Pins Kit for use with Quick Hitch 2 1 $111
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8065
All prices and specifications subject to change without notice page 5 of 5 8055 MIDI USD Price Page
JCB HYDRAULIC EXCAVATOR
8085
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
8085 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE 57.7 SAE net (59.6 gross) hp, Interim Tier IV compliant Isuzu Diesel engine, centrifugal dry type
air cleaner. Water separator, spin-on oil filter, thermostart assist, antifreeze protection to -35 degrees
F. and protective fan guard.
HYDRAULICS One variable displacement axial-type pump yields 45 gpm. Independent left and right track
control. Hydraulic pumps drive integral track motors and gearbox. Two speed travel 2.3 mph
and 2.6 mph.
TRACKS Rubber (optional steel) grease adjusted. Under carriage provides (1) upper and (5) lower rollers per
side. Track width 18" inches. Ground pressure 5.97 lb. per square inch. Ground clearance 14".
ELECTRICAL 12 volt, with 80 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness connectors.
Advanced Management System (AMS) provides extra control, fuel efficiency and diagnostics at the
operator's fingertips. AMS provides three digging modes (standard, light and heavy), auto-idle
function with manual override, and a programmable intermittent windshield wiper/washer.
EXCAVATOR Max. dig depth with standard 79" dipper 13' 10". Servo controls, SAE and ISO patterns both
available on 8080 Midi Excavator with DPC - Dual Pattern Control system.
Dozer control. Single Acting Hydraulics fitted as Standard.
OPERATORS AREA Meets SAE TOPS/FOPS/FOGS requirements, left side entry. Fabric suspension operators seat,
adjustable forward and aft. Swing lock pin and lockable tool box. Excavator servo controls, with safety
interlock. Hand operated track levers with foot pedals fitted as standard. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge. Foot pedal for
swing. Joystick buttons control boom auxiliary circuit. Comes equipped with Airconditioning, heater,
wiper, and front and side opening windows. 8085 MIDI has a "ZERO TAILSWING DESIGN", in which the
rear of the machine (counterweight) does not extend beyond the width of the tracks.
OPERATING WEIGHT Equipped with standard boom dipper and 18" rubber tracks and bucket. Aprx. Operating Weight is 17,634 lbs.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO &
OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS
DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 2 of 5 8085 MIDI USD Price Page
8085 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8585ASALES 8080
CODE ITEM CAB
8586 8085 Midi Base Machine ( 57.6 hp net, Isuzu Diesel 4cyl. engine)
850A251 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning
850B550 Rubber tracks 18" wide (450 mm)
850C308 DPC - Dual Pattern Control System - ISO to SAE - mechanical proportional with foot controlled auxiliary
850D306 Cloth mechanical suspension seat
850E226 American operator handbook
850F305 Standard dipper 78.7" (2000mm) dig depth 13' 10"
850G303 Standard dozer blade, for use with 18" wide tracks (450mm)
850H605 Single to Double acting pipework for 9 spool valve block
850K600 FOGS Guard kit 1
Shipping Weight - Lbs. 18,238
Shipping Weight - Kgs. 8,273
SUGGESTED LIST PRICE $99,934
Select the following machine PACKAGE BUILD code and OPTIONS and/or ATTACHMENTS as required from Section 3 and 4.
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 8085 MIDI USD Price Page
8085 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
8586 8085 Midi Base Machine ( 57.6 hp net, Isuzu Diesel 4cyl. engine) 11,768 5,349 $87,772
OPERATOR'S AREA (E)
850A251 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning 250 114 $5,852
UNDERCARRIAGE (E)
850B550 Rubber tracks 18" wide (450 mm) 240 109 $2,990
850B551 Steel tracks 18" wide (450 mm) 290 132 $3,251
850B552 Steel tracks 24" wide (600 mm) 325 148 $3,900
850B554 Bridgestone Geogrip Rubber Tracks 18" wide 290 132 $7,543
CONTROLS (E)
850C308 50 23 $587
850C309 50 23 $1,671
850C310 0 0 $4,238
850C312 0 0 $5,411
SEATS (E)
850D306 Cloth mechanical suspension seat 8 4 $0
850D308 Cloth high back, heated, air suspension seat 0 0 $1,078
OPERATORS HANDBOOK (E)
850E226 American operator handbook 0 0 $0
850E218 French operator handbook 0 0 $0
DIPPER (E)
850F305 Standard dipper 78.7" (2000mm) dig depth 13' 10" 0 0 $1,236
DOZER BLADE (E)
850G303 Standard dozer blade, for use with 18" wide tracks (450mm) 300 136 $0
850G304 Dozer blade, for use with 24" wide tracks (600mm) 350 159 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
850H605 Single to Double acting pipework for 9 spool valve block 81 37 $587
DPC - Dual Pattern Control System - ISO to SAE with joystick mounted electronic proportional
auxiliary
DPC - Dual Pattern Control System - ISO to SAE - with joystick mounted electronic proportional
auxiliary controls and one mechanical proportional foot control. Includes 850H605 double acting and
low flow pipework
DPC - Dual Pattern Control System - ISO to SAE - twin joystick mounted electronic proportional
auxiliary controls. Includes 850H605 double acting and low flow pipework
DPC - Dual Pattern Control System - ISO to SAE - mechanical proportional with foot controlled
auxiliary
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 5 8085 MIDI USD Price Page
8085 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OTHER HYDRAULIC OPTIONS
850H606 Bucket to Grab changeover 0 0 $716
850L611 Hydraulic biodegradable oil 0 0 $1,970
OPERATORS COMPARTMENT OPTIONS **
850J530 Rotating Beacon 5 2 $213
850K600 FOGS Guard kit 1 25 11 $910
850K601 FOGS Guard kit 2 (Heavy Duty) 25 11 $1,107
850K603 Fan Guard Kit 3 1 $271
850L622 Headrest 5 2 $78
850L623 Refuelling Pump 8 4 $717
850L607 Toolkit 10 5 $71
850J536 Battery isolator 0 0 $356
850L625 Travel alarm 0 0 $378
EXCAVATOR & BUCKET OPTIONS (SAME AS 8065 EXCAVATOR BUCKETS)
850M200 9" Standard duty - 1.75 cu Ft. capacity heaped 140 64 $811
850M201 12" Standard duty - 2.25 cu Ft. capacity heaped 170 77 $894
850M202 14" Standard duty - 2.5 cu Ft. capacity heaped 185 84 $914
850M203 16" Standard duty - 3.0 cu. Ft. capacity heaped 210 95 $985
850M204 18" Standard duty - 3.6 cu. ft. capacity heaped 250 114 $1,035
850M205 24" Standard duty - 5.2 cu. Ft. capacity heaped 265 120 $1,125
850M206 36" Standard bucket - 8.8 cu. Ft. capacity heaped 360 164 $1,351
850M207 60" Grading Bucket - 7.7 cu. Ft. capacity heaped 325 148 $1,140
850M208 Mechanical Quick Hitch for dipper mounted attachments (pin set included) 220 100 $1,378
EXCAVATOR QUICK HITCH
850M210 Mechanical Quick Hitch for dipper mounted attachments (pin set included) 220 100 $1,746
850M211 Pivot Pins Kit for use with Quick Hitch 2 1 $111
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8080/8085
All prices and specifications subject to change without notice page 5 of 5 8085 MIDI USD Price Page
EXCAVATOR
JCB HYDRAULIC EXCAVATOR
JS145
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: July 1, 2013
JS145 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: July 1, 2013
STANDARD EQUIPMENT
ENGINE JCB Ecomax 444, 109 HP at 2,050 RPM. Four-cylinder water cooled common rail direct injection
diesel engine. Low emission engine, EPA Tier 4 interim compliant. Dual element air cleaner.
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 70.7
GPM. Servo pump flow: 5.5 GPM.
OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.
Opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully
adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline.
Cigarette lighter and ashtray. Auto AMS Control System
CONTROLS Excavator controls are ISO pattern, servo operated, with in cab change over switch to SAE. Tracks
are individually operated by foot pedal or hand lever. Speed selection via joystick operated switch.
Control isolation by gate lock lever at cab entrance and a console mounted switch.
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 15' 5" (4.7m). Dippers: 8' 2" (2.5m), 9' 10" (3.0m).
EFFECTIVE: July 1, 2013
UNDERCARRIAGE The undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Twin top and seven
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 3 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 3.0 MPH, low speed is 1.4 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 55 amp output alternator
with 12 volt in-cab supply.
OPERATING WEIGHT Equipped w/standard boom, dipper, 24" track shoes and excavator bucket: aprx. 31,914 lbs.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO
& OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR
PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 2 of 5 JS145 USA Price Page
JS145 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: July 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 9037A 9037BSALES JS145 JS145
CODE ITEM Monoboom Monoboom
9421 Model JS145 Primary Build Tier Satge 3B / 4i
900A112 Long Undercarriage. Overall length: 11'9"
900B521 24", 3 bar - 44 link tracks
900C261 Monoboom with 8' 2" (2.5 m) dipper. No HBCV
900C264 Monoboom with 9' 10" (3.0 m) dipper. No HBCV
900D396 Tipping Link with lifting shackle
900K261 Hammer and Auxiliary Combined for 8' 2" (2.5 m) dipper
900K262 Hammer and Auxiliary Combined for 9' 10" (3.0 m) dipper
900E495 American Manual pack
EFFECTIVE: July 1, 2013 Shipping Weight - Lbs. 32,143 32,293
Shipping Weight - Kgs. 14,580 14,648
SUGGESTED LIST PRICE $149,873 $149,873
ATTACHMENTS FOR PACKAGE BUILD:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS (E)
HEAVY DUTY PLATE LIP
900XB06 24" Wide, 0.57 cu.yd. $4,023
900XB07 30" Wide, 0.73 cu.yd. $4,529
900XB08 36" Wide, 0.89 cu.yd. $4,972
900XB09 42" Wide, 1.048 cu.yd. $5,302
900XB05 48" Wide,1.2 cu.yd. $5,554
DITCHING
900XB11 60" Wide, 0.75 cu.yd. Ditching bucket $5,224
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the
bottom of this sheet. Package build configurations cannot normally be changed. If a Package Build does not meet your
requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 JS145 USA Price Page
JS145 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: July 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9421 Model JS145 Primary Build Tier Satge 3B / 4i $145,545
UNDERCARRIAGE (E)
900A112 Long Undercarriage. Overall length: 11'9" In Base
TRACK PADS (E)
900B521 24", 3 bar - 44 link tracks $2,856
900B522 28", 3 bar - 44 link tracks $3,529
900B523 32", 3 bar -44 link tracks $3,961
EFFECTIVE: July 1, 201324", 3 bar - 44 link steel tracks with bolt-on rubber pads (extended lead time) $11,809
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C261 Monoboom with 8' 2" (2.5 m) dipper. No HBCV $1,012
900C264 Monoboom with 9' 10" (3.0 m) dipper. No HBCV $1,012
TIPPING LINK (E)
900D396 Tipping Link with lifting shackle $459
MANUAL PACK (E)
900E495 American Manual pack In Base
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one
code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 5 JS145 USA Price Page
JS145 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: July 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK NEW FACTORY BUILT ORDERS ONLY
900K261 Hammer and Auxiliary Combined for 8' 2" (2.5 m) dipper In Base
900K262 Hammer and Auxiliary Combined for 9' 10" (3.0 m) dipper In Base
NOTE: For additional factory installed hydraulic pipework options call JCB Product Marketing.
Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900S030 Additional work lights $537
900S040 Rotating Beacon $223
900S001 Fire Extinguisher $333
900R010 Heated Air Suspension Seat $529
900R030 Lower Windshield Wiper $440
900X040 Electric re-fueling pump $645
EFFECTIVE: July 1, 2013Central track guide $832
900S010 Vandal Cover Kit $3,079
900X232 Quickhitch Installation Kit $1,276
900X280 Fuel Cooler (Recommended for ambient environments over 104 deg. F) $246
900R001 AM/FM Radio $163
900S060 Rear View Camera $2,329
900S020 FOPS level 2 Guard - Front Windshield and Roof $6,488
900S025 Mesh screen guard for front windshield $1,724
900X802 HP32 Hydraulic oil - For cold climate operation $0
900X803 HP68 Hydraulic oil - For hot climate operation $0
900X890 Turbo 2 Pre-cleaner $1,716
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
900XB06 24" Wide, 0.57 cu.yd. $4,023
900XB07 30" Wide, 0.73 cu.yd. $4,529
900XB08 36" Wide, 0.89 cu.yd. $4,972
900XB09 42" Wide, 1.048 cu.yd. $5,302
900XB05 48" Wide,1.2 cu.yd. $5,554
DITCHING
900XB11 60" Wide, 0.75 cu.yd. Ditching bucket $5,224
Select Attachments as desired within limitations if indicated.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 5 JS145 USA Price Page
JCB HYDRAULIC EXCAVATOR
JS145 WITH BLADE
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: May 1, 2013
JS145 WITH BLADE HYDRAULIC EXCAVATOR
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: May 1, 2013
STANDARD EQUIPMENT
ENGINE JCB Ecomax 444, 109 HP at 2,050 RPM. Four-cylinder water cooled common rail direct injection
diesel engine. Low emission engine, EPA Tier 4 interim compliant. Dual element air cleaner.
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 70.7
GPM. Servo pump flow: 5.5 GPM.
OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.
Opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully
adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline.
Cigarette lighter and ashtray. Auto AMS Control System
CONTROLS Excavator controls are ISO pattern, servo operated, with in cab change over switch to SAE. Tracks
are individually operated by foot pedal or hand lever. Speed selection via joystick operated switch.
Control isolation by gate lock lever at cab entrance and a console mounted switch.
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 15' 5" (4.7m). Dippers: 8' 2" (2.5m), 9' 10" (3.0m).
UNDERCARRIAGE The undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Twin top and seven
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 3 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 3.0 MPH, low speed is 1.4 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 55 amp output alternator
with 12 volt in-cab supply.
OPERATING WEIGHT Equipped w/standard boom, dipper, 24" track shoes and excavator bucket: aprx. 33,614 lbs.
SECTIONS ARE ORGANIZED AS FOLLOWS: Section 1 - PACKAGE BUILDS Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES.
CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN
3441.
All prices and specifications subject to change without notice page 2 of 5 JS145 BLADE USA Price Page
JS145 WITH BLADE HYDRAULIC EXCAVATOR
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: May 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 9038A 9038BSALES JS145/Blade JS145/Blade
CODE ITEM Monoboom Monoboom
9422 Model JS145 with Blade Primary Build Stage 3B / Tier 4i
900A113 Dozer Undercarriage
900B526 24", 3 bar - 44 link tracks
900C261 Monoboom with 8' 2" (2.5 m) dipper. No HBCV
900C264 Monoboom with 9' 10" (3.0 m) dipper. No HBCV
900D396 Tipping Link with lifting shackle
900K261 Hammer and Auxiliary Combined for 8' 2" (2.5 m) dipper
900K262 Hammer and Auxiliary Combined for 9' 10" (3.0 m) dipper
900E495 American Manual pack
Shipping Weight - Lbs. 33,883 34,033
Shipping Weight - Kgs. 15,369 15,437
SUGGESTED LIST PRICE $167,706 $167,706
ATTACHMENTS FOR PACKAGE BUILD:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS (E)
HEAVY DUTY PLATE LIP
900XB06 24" Wide, 0.57 cu.yd. $4,023
900XB07 30" Wide, 0.73 cu.yd. $4,529
900XB08 36" Wide, 0.89 cu.yd. $4,972
900XB09 42" Wide, 1.048 cu.yd. $5,302
900XB05 48" Wide,1.2 cu.yd. $5,554
DITCHING
900XB11 60" Wide, 0.75 cu.yd. Ditching bucket $5,224
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at
the bottom of this sheet. Package build configurations cannot normally be changed. If a Package Build does not meet
your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 JS145 BLADE USA Price Page
JS145 WITH BLADE HYDRAULIC EXCAVATOR
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: May 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9422 Model JS145 with Blade Primary Build Stage 3B / Tier 4i $163,378
UNDERCARRIAGE (E)
900A113 Dozer Undercarriage In Base
TRACK PADS (E)
900B526 24", 3 bar - 44 link tracks $2,857
900B527 28", 3 bar - 44 link tracks $3,528
900B593 24", 3 bar - 44 link steel tracks with bolt-on rubber pads (extended lead time) $11,809
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C261 Monoboom with 8' 2" (2.5 m) dipper. No HBCV $1,012
900C264 Monoboom with 9' 10" (3.0 m) dipper. No HBCV $1,012
TIPPING LINK (E)
900D396 Tipping Link with lifting shackle $459
MANUAL PACK (E)
900E495 American Manual pack In Base
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one
code from each E (Essential) category below. Select Attachments and/or Options from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 5 JS145 BLADE USA Price Page
JS145 WITH BLADE HYDRAULIC EXCAVATOR
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: May 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK NEW FACTORY BUILT ORDERS ONLY
900K261 Hammer and Auxiliary Combined for 8' 2" (2.5 m) dipper In Base
900K262 Hammer and Auxiliary Combined for 9' 10" (3.0 m) dipper In Base
NOTE: For additional factory installed hydraulic pipework options call JCB Product Marketing.
Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900S030 Additional work lights $537
900S040 Rotating Beacon $223
900S001 Fire Extinguisher $333
900R010 Heated Air Suspension Seat $529
900R030 Lower Windshield Wiper $440
900X040 Electric re-fueling pump $645
900X513 Central track guide $832
900S010 Vandal Cover Kit $3,079
900X232 Quickhitch Installation Kit $1,276
900X280 Fuel Cooler (Recommended for ambient environments over 104 deg. F) $246
900R001 AM/FM Radio $163
900S060 Rear View Camera $2,329
900S020 FOPS level 2 Guard - Front Windshield and Roof $6,488
900S025 Mesh screen guard for front windshield $1,724
900X802 HP32 Hydraulic oil - For cold climate operation $0
900X803 HP68 Hydraulic oil - For hot climate operation $0
900X890 Turbo 2 Pre-cleaner $1,716
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
900XB06 24" Wide, 0.57 cu.yd. $4,023
900XB07 30" Wide, 0.73 cu.yd. $4,529
900XB08 36" Wide, 0.89 cu.yd. $4,972
900XB09 42" Wide, 1.048 cu.yd. $5,302
900XB05 48" Wide,1.2 cu.yd. $5,554
DITCHING
900XB11 60" Wide, 0.75 cu.yd. Ditching bucket $5,224
Select Optional Equipment as desired within limitations if indicated.
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 5 JS145 BLADE USA Price Page
JCB HYDRAULIC EXCAVATOR
JS160
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: May 1, 2013
JS160 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
STANDARD EQUIPMENT
ENGINE JCB Dieselmax 4x4x4, 130 net HP at 2200 RPM, Tier III. Four-cylinder water cooled direct injection
diesel with glow plugs for cold starting. Low emission engine designed to comply with US EPA
emission standard. Dual element air cleaner. Combined single face radiator and hydraulic oil
cooler.
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 86
GPM. Servo pump flow: 5.8 GPM.
OPERATOR'S AREA Climate controlled, noise and vibration isolated by six hydraulically damped resilient mountings
Full opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully
adjustable, high back suspension seat with seatbelt, headrest, armrests, and backrest recline.
Cigarette lighter and ashtray.
CONTROLS Excavator controls are ISO pattern, servo operated, with in cab change over switch to SAE. Tracks
are individually operated by foot pedal or hand lever. Speed selection via joystick operated switch.
Control isolation by gate lock lever at cab entrance and a console mounted switch.
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 16' 11" (5.15m). Dippers: 7' 4" (2.25m), 8' 10" (2.7m), 10' 0" (3.05m).
UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Two top and seven
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 3 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 3.1 MPH, low speed is 1.1 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 50 amp output alternator
with 12 volt in-cab supply.
OPERATING WEIGHT Equipped w/standard boom, dipper, 24" track shoes and excavator bucket: aprx. 37,600 lbs.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO
& OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR
PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 2 of 5 JS160 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 9061A 9061BSALES JS160 JS160
CODE ITEM 8' 10" DIPPER 10' DIPPER
9432 Model JS160 NLC Primary Build Tier 4i
900A477 Narrow long Undercarriage. Use with primary build 9432
900B531 24" (600mm), 3 bar - 43 link chain
900C120 Monoboom with 8' 10" (2.7 m) dipper
900C121 Monoboom with 10' (3.05 m) dipper
900D402 Tipping Link with lifting shackle
900K054 Hammer and Auxiliary Combined for 8' 10" (2.7m) dipper
900K055 Hammer and Auxiliary Combined for 10' (3.05m) dipper
900E140 American Manual pack
Shipping Weight - Lbs. 37,600 37,750
Shipping Weight - Kgs. 17,055 17,123
SUGGESTED LIST PRICE $165,089 $165,089
ATTACHMENTS FOR PACKAGE BUILD:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
900XB18 24" Wide, 0.678 cu.yd. $3,941
900XB19 30" Wide, 0.847 cu.yd. $4,445
900XB20 36" Wide, 1.017 cu.yd. $4,981
900XB21 42" Wide, 1.186 cu.yd. $5,364
900XB17 48" Wide, 1.36 cu.yd. $5,720
DITCHING
900XB25 60" Wide 1.283 cu.yd. $5,223
JS160 HYDRAULIC EXCAVATOR
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at
the bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet
your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 JS160 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9432 Model JS160 NLC Primary Build Tier 4i $160,855
9431 Model JS160 LC Primary Build Tier 4i $160,855
UNDERCARRIAGE (E)
900A476 Long Undercarriage. Use with primary build 9431 In Base
900A477 Narrow long Undercarriage. Use with primary build 9432 In Base
TRACK PADS (E)
900B531 24" (600mm), 3 bar - 43 link chain $2,799
900B532 28" (700mm), 3 bar - 43 link chain $3,457
900B533 32" (800mm) 3 bar - 43 link chain. *Only available on LC Primary Build* $3,885
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C120 Monoboom with 8' 10" (2.7 m) dipper $993
900C121 Monoboom with 10' (3.05 m) dipper $993
TIPPING LINK (E)
900D402 Tipping Link with lifting shackle $442
MANUAL PACK (E)
900E140 American Manual pack In Base
JS160 HYDRAULIC EXCAVATOR
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one
code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 5 JS160 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK NEW FACTORY BUILT ORDERS ONLY
900K054 Hammer and Auxiliary Combined for 8' 10" (2.7m) dipper In Base
900K055 Hammer and Auxiliary Combined for 10' (3.05m) dipper In Base
NOTE: For additional factory installed hydraulic pipework options call JCB Product Marketing.
Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900S040 Rotating Beacon $222
900S001 Fire Extinguisher $333
900S010 Vandal Cover Kit $3,079
900X055 Heated Air Suspension Seat $529
900R030 Lower Windshield Wiper $440
900X532 Twin Track Guides $1,574
900S030 Additional work lights $537
900X040 Electric re-fueling pump $645
900X605 Quickhitch Installation Kit $1,314
900R001 AM/FM Radio $163
900S060 Rear View Camera $2,329
900S020 FOPS level 2 Guard - Front Windshield and Roof $6,488
900S025 Mesh screen guard for front windshield $1,724
900X813 HP32 Hydraulic oil - For cold climate operation $0
900X814 HP68 Hydraulic oil - For hot climate operation $0
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
900XB18 24" Wide, 0.678 cu.yd. $3,941
900XB19 30" Wide, 0.847 cu.yd. $4,445
900XB20 36" Wide, 1.017 cu.yd. $4,981
900XB21 42" Wide, 1.186 cu.yd. $5,364
900XB17 48" Wide, 1.36 cu.yd. $5,720
DITCHING
900XB25 60" Wide 1.283 cu.yd. $5,223
JS160 HYDRAULIC EXCAVATOR
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 5 JS160 USA Price Page
JCB HYDRAULIC EXCAVATOR
JS190
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: July 1, 2013
JS190 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: July 1, 2013
STANDARD EQUIPMENT \
ENGINE JCB 160 Net HP at 1800 RPM, Tier4i. Four-cylinder water cooled direct injection diesel
with glow plugs for cold starting. Low emission engine designed to comply with US EPA Tier 4i
emission standard. Dual element air cleaner. Combined single face radiator and hydraulic oil cooler.
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Two variable displacement axial piston pumps yield combined flow of 84 GPM.
Independent servo gear pump delivers 4.6 GPM.
OPERATOR'S AREA Climate controlled, noise and vibration isolated by six hydraulically damped resilient mountings
and lower windows. Full opening door window. Fan forced fresh air ventilation with defogger and
Fully adjustable, high back suspension seat with seatbelt, headrest, armrests, and backrest recline
Cigarette lighter and ashtray.
CONTROLS Excavator controls are ISO pattern, servo operated, with in cab change over switch to SAE. Tracks
are individually operated by foot pedal or hand lever. Speed selection via joystick operated switch.
Control isolation by gate lock lever at cab entrance and a console mounted switch.
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 16' 11" (5.15m). Dippers: 8' 10" (2.7m), 10' 0" (3.05m).
UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Two top and seven
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil. Two track guides per side
TRACK DRIVE Full hydrostatic, 3 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 3.4 MPH, low speed is 1.5 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 40 amp output alternator
with 12 volt in-cab supply.
OPERATING WEIGHT Equipped w/standard boom, dipper, 24" track shoes and excavator bucket: aprx. 44,100 lbs.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO &
OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR
PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 2 of 5 JS190 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: July 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 9085A 9085BSALES JS190 JS190
CODE ITEM 8' 10" DIPPER 10' DIPPER
9452 JS190NLC MONOBOOM Stage 3B/Tier 4i
900A420 Narrow Long Undercarriage. Use with 9452
900B507 24" (600mm), 3 bar - 46 link chain, offset.
900C126 Monoboom with 8' 10" (2.7 m) dipper
900C127 Monoboom with 10' (3.05 m) dipper
900D402 Tipping Link with lifting shackle
900K075 Hammer and Auxiliary Combined for 8' 10" (2.7m) dipper
900K076 Hammer and Auxiliary Combined for 10' (3.05m) dipper
900E141 American Manual pack
Shipping Weight - Lbs. 41,495 41,695
Shipping Weight - Kgs. 18,822 18,913
SUGGESTED LIST PRICE $180,970 $181,006
ATTACHMENTS FOR PACKAGE BUILD:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
900XB18 24" Wide, 0.678 cu.yd. $3,941
900XB19 30" Wide, 0.847 cu.yd. $4,445
900XB20 36" Wide, 1.017 cu.yd. $4,981
900XB21 42" Wide, 1.186 cu.yd. $5,364
900XB17 48" Wide, 1.36 cu.yd. $5,720
DITCHING
900XB25 60" Wide 1.283 cu.yd. $5,223
JS190 HYDRAULIC EXCAVATOR
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the
bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet your
requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 JS190 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: July 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9452 JS190NLC MONOBOOM Stage 3B/Tier 4i $176,736
9451 JS190LC MONOBOOM Stage 3B/Tier 4i $176,737
UNDERCARRIAGE (E)
900A418 Standard Undercarriage. Use with 9451 In Base
900A420 Narrow Long Undercarriage. Use with 9452 In Base
TRACK PADS (E)
900B507 24" (600mm), 3 bar - 46 link chain, offset. $2,799
900B542 24" (600mm), 3 bar - 46 link chain. $2,799
900B543 28" (700mm), 3 bar - 46 link chain. $3,837
900B561 32" (800mm), 3 bar - 46 link chain. $4,874
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C126 Monoboom with 8' 10" (2.7 m) dipper $993
900C127 Monoboom with 10' (3.05 m) dipper $1,029
TIPPING LINK (E)
900D402 Tipping Link with lifting shackle $442
MANUAL PACK (E)
900E141 American Manual pack In Base
JS190 HYDRAULIC EXCAVATOR
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one
code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 5 JS190 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: July 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK NEW FACTORY BUILT ORDERS ONLY
900K075 Hammer and Auxiliary Combined for 8' 10" (2.7m) dipper In Base
900K076 Hammer and Auxiliary Combined for 10' (3.05m) dipper In Base
NOTE: For additional factory installed hydraulic pipework options call JCB Product Marketing.
Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900S040 Rotating Beacon $223
900S001 Fire Extinguisher $333
900S010 Vandal Cover Kit $3,079
900R010 Heated Air Suspension Seat $529
900R030 Lower Windshield Wiper $440
900S030 Additional work lights $537
900X040 Electric re-fueling pump $645
900X605 Quickhitch Installation Kit $1,314
900R001 AM/FM Radio $163
900S060 Rear View Camera $2,329
900S020 FOPS level 2 Guard - Front Windshield and Roof $6,488
900S025 Mesh screen guard for front windshield $1,724
900X046 Turbo 2 Pre-cleaner $2,067
900X048 Widecore Radiator - Note - this will reduce cooling performance $2,620
900X813 HP32 Hydraulic oil - For cold climate operation $0
900X814 HP68 Hydraulic oil - For hot climate operation $0
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
900XB18 24" Wide, 0.678 cu.yd. $3,941
900XB19 30" Wide, 0.847 cu.yd. $4,445
900XB20 36" Wide, 1.017 cu.yd. $4,981
900XB21 42" Wide, 1.186 cu.yd. $5,364
900XB17 48" Wide, 1.36 cu.yd. $5,720
DITCHING
900XB25 60" Wide 1.283 cu.yd. $5,223
JS190 HYDRAULIC EXCAVATOR
Select Optional Equipment as desired within limitations if indicated.
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 5 JS190 USA Price Page
JCB HYDRAULIC EXCAVATOR
JS220
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: May 1, 2013
JS220 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
STANDARD EQUIPMENT
ENGINE Isuzu model 4HKIX, 172 Net HP at 2000 RPM, Tier III. Four-cylinder water cooled direct injection
diesel with glow plugs for cold starting. Low emission engine designed to comply with US EPA
Tier III emission standard. Dual element air cleaner. Combined single face radiator and
hydraulic oil cooler.
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 114
GPM. Servo pump flow: 5.3 GPM.
OPERATOR'S AREA Climate controlled, noise and vibration isolated by six hydraulically damped resilient mountings
Full opening door window. Fan forced fresh air ventilation with defogger and washer/wiper.
Fully adjustable, high back suspension seat with seatbelt, headrest, armrests and backrest recline.
Cigarette lighter and ashtray.
CONTROLS Excavator controls are ISO pattern, servo operated, with in cab change over switch to SAE. Tracks
are individually operated by foot pedal or hand lever. Speed selection via joystick operated switch.
Control isolation by gate lock lever at cab entrance and a console mounted switch.
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No dipper reinforcing
required for hammer operations. Boom: 18' 8" (5.70m). Dipper Arms: 7' 10" (2.40m) or 9' 10"
(3.0m). Electric refueling pump is situated in tool box.
UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X-frame type with flush fitted, heavy duty
swing turret cover and heavy duty undercover. Two top and eight bottom rollers are sealed and lubricated.
Track idler is sealed and lubricated and incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 3 speed, driven by two axial piston motors. Flush fitted heavy duty track motor
guards. Final drives are planetary reduction type with bolt on sprockets. Maximum track speed is
3.4 MPH, low speed is 1.4 MPH. Parking brake is disc type, spring applied, hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 40 amp output alternator with
12 volt in-cab supply.
OPERATING WEIGHT Equipped w/standard boom, dipper, 32" track shoes and excavator bucket: aprx. 51,000 lbs.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO &
OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS
DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 2 of 5 JS220 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 9107ASALES JS220
CODE Monoboom
9107 Model JS220 Long Undercarriage Primary Build
900A462 Long Undercarriage.
900B505 32" (800mm) 3 bar - 49 link chain
900C012 Monoboom with 9' 10" (3.0 m) dipper
900D371 Tipping link with lifting shackle
900K006 Hammer and Auxiliary Combined Pipework for 9' 10" (3.0m) dipper
900E033 American Manual pack
Shipping Weight - Lbs. 49,500
Shipping Weight - Kgs. 22,453
SUGGESTED LIST PRICE $188,713
ATTACHMENTS FOR PACKAGE BUILD:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
900XB33 24" Wide, 0.787 cu.yd. $5,429
900XB34 30" Wide, 0.984 cu.yd. $5,994
900XB35 36" Wide, 1.180 cu.yd. $6,286
900XB36 42" Wide, 1.377 cu.yd. $6,679
900XB37 48" Wide, 1.574 cu.yd. $7,169
900XB38 54" Wide, 1.771 cu.yd. $7,735
DITCHING
900XB47 66" Wide, 1.417 cu.yd. $6,348
ITEM
JS220 HYDRAULIC EXCAVATOR
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the
bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet your
requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 JS220 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
BASE MACHINE (E)
9107 Model JS220 Long Undercarriage Primary Build $181,372
UNDERCARRIAGE (E)
900A462 Long Undercarriage. In Base
TRACK PADS (E)
900B504 28" (700mm), 3 bar - 49 link chain $4,718
900B505 32" (800mm) 3 bar - 49 link chain $5,862
900B506 36" (900mm), 3 bar - 49 link chain. $5,862
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C011 Monoboom with 7' 10" (2.4 m) dipper $1,029
900C012 Monoboom with 9' 10" (3.0 m) dipper $1,029
TIPPING LINK (E)
900D371 Tipping link with lifting shackle $451
MANUAL PACK (E)
900E033 American Manual pack In Base
ITEM
JS220 HYDRAULIC EXCAVATOR
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one
code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 5 JS220 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
HYDRAULIC ATTACHMENT PIPEWORK NEW FACTORY BUILT ORDERS ONLY
900K005 Hammer and Auxiliary Combined Pipework for 7' 10" (2.4 m) Dipper In Base
900K006 Hammer and Auxiliary Combined Pipework for 9' 10" (3.0m) dipper In Base
NOTE: For additional factory installed hydraulic pipework options call JCB Product Marketing.
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900S030 Additional work lights $537
900S040 Rotating Beacon $222
900S001 Fire Extinguisher $333
900S010 Vandal Cover Kit $3,079
900R010 Heated Air Suspension Seat $529
900R030 Lower Windshield Wiper $440
900P001 Fuel Cooler (Recommended for ambient environments over 104 deg. F $583
900M200 Quickhitch Installation Kit $1,314
900R001 AM/FM Radio $163
900S060 Rear View Camera $2,329
900P120 Widecore Radiator - Note - this will reduce cooling performance $2,356
900S020 FOPS level 2 Guard - Front Windshield and Roof $6,488
900V001 HP32 Hydraulic oil - For cold climate operation $0
900V002 HP68 Hydraulic oil - For hot climate operation $0
900S025 Mesh screen guard for front windshield $1,724
900X236 Hammer Pipework Shut-off Valves - 7' 10" dipper $639
900X235 Hammer Pipework Shut-off Valves - 9' 10" dipper $670
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
900XB33 24" Wide, 0.787 cu.yd. $5,429
900XB34 30" Wide, 0.984 cu.yd. $5,994
900XB35 36" Wide, 1.180 cu.yd. $6,286
900XB36 42" Wide, 1.377 cu.yd. $6,679
900XB37 48" Wide, 1.574 cu.yd. $7,169
900XB38 54" Wide, 1.771 cu.yd. $7,735
DITCHING
900XB47 66" Wide, 1.417 cu.yd. $6,348
ITEM
ITEM
JS220 HYDRAULIC EXCAVATOR
Select Optional Equipment as desired within limitations if indicated.
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 5 JS220 USA Price Page
JCB HYDRAULIC EXCAVATOR
JS260
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: May 1, 2013
JS260 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
STANDARD EQUIPMENT
ENGINE Isuzu model 4HKIX, 197 gross HP at 2000 RPM, Tier 4i. Four-cylinder water cooled direct injection
diesel w/glow plugs for cold starting. Low emission engine designed to comply with US EPA Tier 4i
emission standard. Dual element air cleaner. Combined single face radiator and hydraulic oil cooler.
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 120
GPM. Servo pump flow: 5.7 GPM.
OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.
Full opening door window. Fan forced fresh air ventilation, with defogger and washer/wiper
Fully adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline.
Cigarette lighter and ashtray.
CONTROLS Excavator controls are ISO pattern, servo operated, with in cab change over switch to SAE. Tracks
are individually operated by foot pedal or hand lever. Speed selection via joystick operated switch.
Control isolation by gate lock lever at cab entrance and a console mounted switch.
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No dipper reinforcing
required for hammer operations. Boom: 19' 2" (5.85m). Dippers: 6' 6" (2.0 m) 8' 0" (2.44m), 10' 2"
(3.09m), 11' 7" (3.53m). Electric refueling pump is situated in tool box.
UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X frame type with undercarriage
center cover, engine undercover, and travel drive motor shields. Two top and 9 bottom rollers are
heat-treated, sealed, and lubricated. Track idler is sealed and lubricated and incorporates spring
cushion recoil.
TRACK DRIVE Full hydrostatic, 3 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 3.4 MPH, low speed is 1.4 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 40 amp output alternator with
12 volt in-cab supply.
OPERATING WEIGHT Equipped w/standard boom, dipper, 32" track shoes and excavator bucket: 59,000 lb.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO
& OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR
PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 2 of 5 JS260 USA Price Page
JS260 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 9225A
SALES JS260
CODE Monoboom
9225
900A472
900B008 32" (800mm), 3 bar track plates - 51 link chain
900C021 Monoboom with 10' 2" (3.09 m) dipper
900D381 Tipping Link with lifting shackle
900E538 American Manual pack
Shipping Weight - Lbs. 57,250
Shipping Weight - Kgs. 25,969
SUGGESTED LIST PRICE $241,948
ATTACHMENTS FOR PACKAGE BUILD:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS (E)
HEAVY DUTY PLATE LIP
900XB54 24" Wide, 0.902 cu.yd. $6,989
900XB55 30" Wide, 1.128 cu.yd. $7,865
900XB56 36" Wide, 1.354 cu.yd. $8,255
900XB57 42" Wide, 1.579 cu.yd. $9,099
900XB58 48" Wide, 1.805 cu.yd. $9,592
900XB59 54" Wide, 2.03 cu.yd. $10,219
DITCHING
900XB68 66" Wide, 1.417 cu.yd. $6,908
ITEM
Model JS260 Primary Build Tier 4i
Long Undercarriage
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the
bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet your
requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 JS260 USA Price Page
JS260 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
BASE MACHINE (E)
9225 Model JS260 Primary Build Tier 4i $234,272
UNDERCARRIAGE (E)
900A472 Long Undercarriage In Base
TRACK PADS (E)
900B005 28" (700mm), 3 bar track plates- 51 link chain $4,975
900B008 32" (800mm), 3 bar track plates - 51 link chain $5,862
900B010 36" (900mm), 3 bar track plates - 51 link chain $7,972
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C021 Monoboom with 10' 2" (3.09 m) dipper $1,367
900C022 Monoboom with 11' 7" (3.53 m) dipper $1,367
TIPPING LINK (E)
900D381 Tipping Link with lifting shackle $447
MANUAL PACK (E)
900E538 American Manual pack In Base
ITEM
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one
code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 5 JS260 USA Price Page
JS260 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
HYDRAULIC ATTACHMENT PIPEWORK NEW FACTORY BUILT ORDERS ONLY
900K156 Hammer pipework for 10' 2" (3.09 m) dipper $5,762
900K159 Hammer and Auxiliary pipework for 10' 2" (3.09m) dipper $9,668
900K736 Hammer and Auxiliary and Low flow pipework (7-11 gpm) for 10' 2" (3.09 m) dipper $11,005
NOTE: For additional factory installed hydraulic pipework options call JCB Product Marketing.
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900S030 Additional work lights $537
900S040 Rotating Beacon $222
900S001 Fire Extinguisher $333
900R010 Heated Air Suspension Seat $529
900R030 Lower Windshield Wiper $440
900R001 AM/FM Radio $163
900S060 Rear View Camera $2,329
900S020 FOPS level 2 Guard - Front Windshield and Roof $6,488
900S025 Mesh screen guard for front windshield $1,724
900P015 Turbo 2 Pre-cleaner $2,089
900S010 Vandal Cover Kit $3,079
900V001 HP32 Hydraulic oil - For cold climate operation $0
900V002 HP68 Hydraulic oil - For hot climate operation $0
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
900XB54 24" Wide, 0.902 cu.yd. $6,989
900XB55 30" Wide, 1.128 cu.yd. $7,865
900XB56 36" Wide, 1.354 cu.yd. $8,255
900XB57 42" Wide, 1.579 cu.yd. $9,099
900XB58 48" Wide, 1.805 cu.yd. $9,592
900XB59 54" Wide, 2.03 cu.yd. $10,219
DITCHING
900XB68 66" Wide, 1.417 cu.yd. $6,908
ITEM
ITEM
Select Optional Equipment as desired within limitations if indicated.
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 5 JS260 USA Price Page
JCB HYDRAULIC EXCAVATOR
JS330
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: May 1, 2013
JS330 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
STANDARD EQUIPMENT
ENGINE Isuzu model AH-6HKIX, 282 Gross HP at 2000 RPM, Tier 4i. Six-cylinder water cooled common rail direct
injection diesel w/glow plugs for cold starting. Low emission engine designed to comply with US EPA
Tier 4i emission standard. Dual element air cleaner. Heavy duty cooling via large capacity engine
radiator with anti-block fin design.
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 160
GPM. Servo pump flow: 8 GPM.
OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.
Full opening door window. Fan forced fresh air ventilation, with defogger and washer/wiper.
Fully adjustable suspension seat with seatbelt, headrest, armrests and backrest recline.
Cigarette lighter.
CONTROLS Excavator controls are ISO pattern, servo operated, with in cab change over switch to SAE. Tracks
are individually operated by foot pedal or hand lever. Speed selection via joystick operated switch.
Control isolation by gate lock lever at cab entrance and a console mounted switch.
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No dipper reinforcing
required for hammer operations. Boom: 21'2" (6.45m). Dippers: 7' 3" (2.21m) 8' 7" (2.63m), 10' 7"
(3.23m), 13' 2" (4.03m). Electric refueling pump is situated in tool box.
UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X frame type with undercarriage center
cover, engine undercover, and travel drive motor shields. Two top and nine bottom rollers are heat-
treated, sealed, and lubricated. Track idler is sealed, lubricated and incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 3 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 3.0 MPH, low speed is 1.5 MPH. Parking brake is disc type, spring
applied, hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 50 amp output alternator with
12 volt in-cab supply.
OPERATING WEIGHT Equipped w/standard boom, dipper, 32" track shoes and excavator bucket: aprx. 74,200 lbs.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND
REFER TO TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 2 of 5 JS330 USA Price Page
JS330 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 9770ASALES JS330
CODE Monoboom
9770 Model JS330 Primary Build 4i
900A800 Long Undercarriage
900B802 32" (800mm) 3 bar - 50 link chain
900C882 Monoboom with 10' 7" (3.23 m) dipper
900D801 Tipping Link with lifting shackle
900E864 American Manual pack
Shipping Weight - Lbs. 72,600
Shipping Weight - Kgs. 32,931
SUGGESTED LIST PRICE $305,148
ATTACHMENTS FOR PACKAGE BUILD:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS (E)
HEAVY DUTY PLATE LIP
900XB75 30" Width, 1.258 cu.yd. $11,182
900XB76 36" Width, 1.537 cu.yd. $12,481
900XB77 42" Width, 1.816 cu.yd. $13,473
900XB78 48" Width, 2.096 cu.yd. $14,217
900XB79 54" Width, 2.375 cu.yd. $15,057
900XB80 60" Width, 2.655 cu.yd. $15,856
ITEM
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the
bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet your
requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 JS330 USA Price Page
JS330 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
BASE MACHINE (E)
9770 Model JS330 Primary Build 4i $296,546
UNDERCARRIAGE (E)
900A800 Long Undercarriage In Base
TRACK PADS (E)
900B801 28" (700mm), 3 bar - 50 link chain $4,051
900B802 32" (800mm) 3 bar - 50 link chain $6,437
900B803 36" (900mm), 3 bar -50 link chain $9,663
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C881 Monoboom with 8' 7" (2.63 m) dipper $1,458
900C882 Monoboom with 10' 7" (3.23 m) dipper $1,601
900C883 Monoboom with 13' 2" (4.03 m) dipper $1,742
TIPPING LINK (E)
900D801 Tipping Link with lifting shackle $563
MANUAL PACK (E)
900E864 American Manual pack In Base
ITEM
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one
code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 5 JS330 USA Price Page
JS330 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
HYDRAULIC ATTACHMENT PIPEWORK NEW FACTORY BUILT ORDERS ONLY
900K863 Hammer pipework for 8' 7" (2.63 m) dipper $8,847
900K864 Hammer pipework for 10' 7" (3.23 m) dipper $8,847
900K866 Hammer / Auxiliary merged pump pipework for 8' 7" (2.63 m) dipper $12,185
900K867 Hammer / Auxiliary merged pump pipework for 10' 7" (3.23 m) dipper $12,185
NOTE: For additional factory installed hydraulic pipework options call JCB Product Marketing.
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900S030 Additional work lights $537
900S040 Rotating Beacon $222
900S001 Fire Extinguisher $333
900S010 Vandal Cover Kit $3,079
900R010 Heated Air Suspension Seat $529
900R001 AM/FM Radio $163
900S060 Rear View Camera $2,329
900X560 Additional Reinforcement Plates for 8' 7" dipper (Heavy Duty Applications) $1,385
900X571 Additional Reinforcement Plates for 10' 7" dipper (Heavy Duty Applications) $1,437
900X802 HP32 Hydraulic oil - For cold climate operation $0
900X803 HP68 Hydraulic oil - For hot climate operation $0
900X208 FOPS level 2 Guard - Front Windshield and Roof $6,488
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
900XB75 30" Width, 1.258 cu.yd. $11,182
900XB76 36" Width, 1.537 cu.yd. $12,481
900XB77 42" Width, 1.816 cu.yd. $13,473
900XB78 48" Width, 2.096 cu.yd. $14,217
900XB79 54" Width, 2.375 cu.yd. $15,057
900XB80 60" Width, 2.655 cu.yd. $15,856
ITEM
ITEM
Select Optional Equipment as desired within limitations if indicated.
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 5 JS330 USA Price Page
JCB HYDRAULIC EXCAVATOR
JS360
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: May 1, 2013
JS360 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
STANDARD EQUIPMENT
ENGINE Isuzu model AH-6HKIX, 282 Gross HP at 2000 RPM, Tier 4i. Six-cylinder water cooled common rail direct
injection diesel w/glow plugs for cold starting. Low emission engine designed to comply with US EPA
Tier 4i emission standard. Dual element air cleaner. Heavy duty cooling via large capacity engine
radiator with anti-block fin design.
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 164
GPM. Servo pump flow: 8 GPM.
OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.
windows. Full opening door window. Fan forced fresh air ventilation, with defogger and washer/wiper.
Fully adjustable suspension seat with seatbelt, headrest, armrests and backrest recline.
Cigarette lighter.
CONTROLS Excavator controls are ISO pattern, servo operated, with in cab change over switch to SAE. Tracks
are individually operated by foot pedal or hand lever. Speed selection via joystick operated switch.
Control isolation by gate lock lever at cab entrance and a console mounted switch.
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No dipper reinforcing
required for hammer operations. Boom: 21' 2" (6.45m). Dippers: 7' 3" (2.21m) 8' 8" (2.63m), 10' 7"
(3.23m), 13' 3" (4.03m). Electric refueling pump is situated in tool box.
UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X frame type with undercarriage center
cover, engine undercover, and travel drive motor shields. Two top and nine bottom rollers are heat-
treated, sealed, and lubricated. Track idler is sealed, lubricated and incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 3 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 3.4 MPH, low speed is 1.5 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 50 amp output alternator with
12 volt in-cab supply.
OPERATING WEIGHT Equipped w/standard boom, dipper, 32" track shoes and excavator bucket: aprx. 84,500 lbs.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS
IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND
REFER TO TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 2 of 5 JS360 USA Price Page
JS360 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 9781ASALES JS360
CODE Monoboom
9781 Model JS360 Primary Build Tier 4i
900A006 Long Undercarriage
900B021 32" (800mm), 3 bar- 50 link chain
900C157 Monoboom with 10' 7" (3.23 m) dipper
900D003 Tipping link with lifting shackle
900E748 American Manual pack
Shipping Weight - Lbs. 82,829
Shipping Weight - Kgs. 37,571
SUGGESTED LIST PRICE $349,601
ATTACHMENTS FOR PACKAGE BUILD:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS (E)
HEAVY DUTY PLATE LIP
900XB75 30" Width, 1.258 cu.yd. $11,182
900XB76 36" Width, 1.537 cu.yd. $12,481
900XB77 42" Width, 1.816 cu.yd. $13,473
900XB78 48" Width, 2.096 cu.yd. $14,217
900XB79 54" Width, 2.375 cu.yd. $15,057
900XB80 60" Width, 2.655 cu.yd. $15,856
ITEM
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the
bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet your
requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 5 JS360 USA Price Page
JS360 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
BASE MACHINE (E)
9781 Model JS360 Primary Build Tier 4i $340,654
UNDERCARRIAGE (E)
900A006 Long Undercarriage In Base
TRACK PADS (E)
900B020 28" (700mm), 3 bar- 50 link chain $4,052
900B021 32" (800mm), 3 bar- 50 link chain $6,770
900B022 36" (900mm), 3 bar- 50 link chain $9,785
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C156 Monoboom with 8' 7" (2.63 m) dipper $1,600
900C157 Monoboom with 10' 7" (3.23 m) dipper $1,600
900C158 Monoboom with 13' 2" (4.03 m) dipper $1,776
TIPPING LINK (E)
900D003 Tipping link with lifting shackle $577
MANUAL PACK (E)
900E748 American Manual pack In Base
ITEM
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one
code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 5 JS360 USA Price Page
JS360 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: May 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
HYDRAULIC ATTACHMENT PIPEWORK NEW FACTORY BUILT ORDERS ONLY
900K863 Hammer pipework for 8' 7" (2.63 m) dipper $8,847
900K864 Hammer pipework for 10' 7" (3.23 m) dipper $8,847
900K866 Hammer / Auxiliary merged pump pipework for 8' 7" (2.63 m) dipper $12,185
900K867 Hammer / Auxiliary merged pump pipework for 10' 7" (3.23 m) dipper $12,185
NOTE: For additional factory installed hydraulic pipework options call JCB Product Marketing.
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900S030 Additional work lights $537
900S040 Rotating Beacon $222
900S001 Fire Extinguisher $333
900S010 Vandal Cover Kit $3,079
900R010 Heated Air Suspension Seat $529
900R030 Lower Windshield Wiper $440
900R001 AM/FM Radio $163
900S020 FOPS level 2 Guard - Front Windshield and Roof $6,488
900S025 Mesh screen guard for front windshield $1,724
900S060 Rear View Camera $2,329
900P041 Turbo 2 Pre-Cleaner $2,089
900V001 HP32 Hydraulic oil - For cold climate operation $0
900V002 HP68 Hydraulic oil - For hot climate operation $0
0 ATTACHMENTS - NEW FACTORY BUILT ORDERS $0
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
900XB75 30" Width, 1.258 cu.yd. $11,182
900XB76 36" Width, 1.537 cu.yd. $12,481
900XB77 42" Width, 1.816 cu.yd. $13,473
900XB78 48" Width, 2.096 cu.yd. $14,217
900XB79 54" Width, 2.375 cu.yd. $15,057
900XB80 60" Width, 2.655 cu.yd. $15,856
ITEM
ITEM
Select Optional Equipment as desired within limitations if indicated.
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 5 JS360 USA Price Page
WHEEL LOADER
COMPACT WHEEL LOADER
406B
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
406B WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe coupled by heavy duty articulation point
Front and rear fenders. One piece rear engine cover, all keys alike
Articulation locking strut, counterweight mounted tow hitch with locking pin.
ENGINE 3.6 L (220 CID) Industrial 4 -cylinder air cooled direct injection with 62 gross/ 58 net HP
Tier III engine, dual element air cleaner, spin on filter, water separator, thermostart assist.
TRANSMISSION Hydrostatic transmission incorporating a speed inhibitor and modulation for smooth directional
changes featuring automatic braking effect for ease of operation and high and low operating range.
Direction change on joystick and switchable high/low range.
TIRES Several types available. See section 2
FRONT/REAR AXLE Standard front differential and limited slip rear axle.
Optional limited slip differentials in both axles for superior traction
BRAKES Inboard wet disc brakes on rear axle
Park brake in center casing of rear axle
ELECTRICS 12 volt, IP 67 water and dust resistant connectors with numerical coded wiring
80 amp alternator with heavy duty low maintenance battery rated at 870 CCA
Audible back up alarm, turn signals, and battery isolator
INSTRUMENTS Audible and visual engine and powertrain warning system monitoring engine oil pressure
engine coolant temperature, air filter condition, alternator charge, hand brake applied, transmission
oil temperature, oil filter blocked, turn indicators, hazard warning, head lamp main beam
CAB UNIT SAE certified ROPS/FOPS fully enclosed cab. Low line one piece windshield and side windows
Fully adjustable cloth suspension seat, retractable 2 inch seat belt, front windshield washer/ wiper
Loader control lockout mechanism. Operators manual
Canopy - Open frame with vinyl seat.
HYDRAULICS Single gear pump with 16 GPM flow. Single lever control for lift and tilt functions with direction control
switch. Priority steering valve for accurate handling and safety
LOADER Loader arms with general purpose bucket (see options, Section 3). Parallel fork lift with the use of JCB
pallet forks. One hydraulic circuit with diverter valve for use with hydraulic attachments.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LISTED SEPARATELY FOR ALL WHEEL LOADERS
All prices and specifications subject to change without notice page 2 of 6 406 USD Price Page
406B WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 6614A 6614BCODE ITEM CANOPY CAB
6614 406B Compact WL Base Machine (58 hp net, 4 cyl engine)
406A605 Michelin 335/80 R18 XZSL
406A608 Dunlop 365/70 R18 SPT9
406B604 CAB - High spec with sliding door window
406B605 CANOPY - Four pillars, no glass
406C601 NO Heater - (for use with Canopy 406B605 only)
406C602 HEATER and AIR CONDITIONING (for use with 406B604 only)
406D600 12.5 mph Standard Front Differential and Limited Slip Rear Axles
406E600 3 Spool Servo Control (must use Servo Control if A/C fitted)
406E602 3 Spool Manual, Joystick Control (not compatible with 406C602)
406F606 Operators Handbook / Manual pack - ENGLISH
406G600 Quickhitch - JCB Hydraulic
406H702 G.P. Bucket 1.0 cu. yd - c/w Bolt-on Edge
406N607 Reverse Lights (Counter weight mounted) x2
406R601 Radio Installation Kit (excludes radio)
406R604 Full Instrumentation
406R606 Tilt and Slide Steering Column
406R620 In-Cab Quickhitch Isolator- SERVO controls only
406T609 Auxiliary relief valve 3 spool MANUAL control
406T611 Auxiliary relief valve 3 spool SERVO control
Shipping Weight - Lbs. 10,582 11,204
Shipping Weight - Kgs. 4,800 5,082
SUGGESTED LIST PRICE $66,994 $74,835
Select one of the following machine PACKAGE BUILD codes. Package build configurations cannot normally be changed. If a
Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options
Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be
fitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 406 USD Price Page
406B WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
6614 406B Compact WL Base Machine (58 hp net, 4 cyl engine) $39,244
MANUALS (E)
406F606 Operators Handbook / Manual pack - ENGLISH $0
WHEELS AND TIRES (E)
406A605 Michelin 335/80 R18 XZSL $5,664
406A608 Dunlop 365/70 R18 SPT9 $4,571
406A603 Solid Deal 12.5 x 18 $2,612
OPERATORS AREA (E)
406B604 CAB - High spec with sliding door window $7,297
406B605 CANOPY - Four pillars, no glass $4,508
HEATER (E)
406C602 HEATER and AIR CONDITIONING (for use with 406B604 only) $2,411
406C600 HEATER (for use with 406B604 only) $755
406C601 NO Heater - (for use with Canopy 406B605 only) $0
AXLES (E)
406D600 12.5 mph Standard Front Differential and Limited Slip Rear Axles $9,842
406D601 12.5 mph Limited Slip Differential Front and Rear Axles $10,232
AUXILIARY HYDRAULICS (E)
406E602 3 Spool Manual, Joystick Control (not compatible with 406C602) $3,095
406E600 3 Spool Servo Control (must use Servo Control if A/C fitted) $4,034
406E601 4 Spool Servo Control (must use Servo Control if A/C fitted) $5,059
HYDRAULIC QUICKHITCH (E)
406G600 Quickhitch - JCB Hydraulic $1,904
406G601 No Quickhitch - Transport Linkage Only $1,194
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 406 USD Price Page
406B WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATORS COMPARTMENT OPTIONS
406N605 Rotating Beacon $98
406N600 Worklights FRONT x 2 $98
406N607 Reverse Lights (Counter weight mounted) x2 $98
406N608 Worklights - REAR x 2 for machines equipped with cab heater only. $124
406N610 Worklights - REAR x 2 for machines equipped with Air Conditioning. $124
406R600 Fire Extinguisher (5.5lb capacity) $131
406R601 Radio Installation Kit (excludes radio) $100
406R604 Full Instrumentation $240
406R606 Tilt and Slide Steering Column $280
406R608 Air Suspension Seat $1,216
406R609 Mech. Suspension, vinyl, 3" seatbelt $269
406R610 Mech. Suspension, fabric, 3" seatbelt $269
406R613 Seat backrest extension (only available for mech. Suspension seat) $142
406R617 Face Level Fan for CANOPY only $224
OTHER MACHINE OPTIONS
406R614 In-Cab Quickhitch Isolator- MANUAL controls only $509
406R620 In-Cab Quickhitch Isolator- SERVO controls only $509
406R615 Smooth Ride - MANUAL controls only (for use with 406E602) $1,206
406R618 Smooth Ride - SERVO control only (for use with 406E600 or 406E601) $1,206
406R616 Creep Speed CAB w/Heater, NO AC build only $1,379
406R621 Creep Speed CANOPY build only $1,215
406R624 Creep Speed CAB with AC build only $1,379
406S606 Front Screen Guard $2,465
406T609 Auxiliary relief valve 3 spool MANUAL control $107
406T610 Auxiliary relief valve 4 spool MANUAL control $210
406T611 Auxiliary relief valve 3 spool SERVO control $107
406T612 Auxiliary relief valve 4 spool SERVO control $210
406T530 Bucket Level Indicator $115
406S708 Front Light Guards $204
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 406 USD Price Page
406BWHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
JCB QUICKHITCH LOADER BUCKETS
406H701 G.P. Bucket 1.0 cu. yd - c/w Teeth $2,988
406H702 G.P. Bucket 1.0 cu. yd - c/w Bolt-on Edge $3,104
406H706 Multipurpose bucket (6 in 1) 1.0 cu. Yd. c/w front & rear 74" toeplate $7,009
406H720 1.8 cu. Yd. Bucket - Light duty with Bolt-on Edge $3,778
OTHER QUICKHITCH ATTACHMENTS
406H710 47 in Forks and Fork Frame (53 in wide) $1,835
406S607 Adapter Frame 406 to 409 $3,350
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 406 USD Price Page
COMPACT WHEEL LOADER
409B
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
409B COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules coupled by an extreme service articulation joint.
Front & rear fenders. One piece rear engine cover, cab door and ignition keyed alike.
Articulation locking strut, counterweight mounted tow hitch with locking pin.
ENGINE 3.6 L (220 CID) Industrial 4-cylinder oil-cooled turbo charged with 75 gross/72 net HP, Tier III,
dual element air cleaner, spin-on filters, water separator, thermostart assist.
TRANSMISSION Hydrostatic transmission incorporating a speed inhibitor and modulation for smooth directional
changes featuring automatic braking effect for ease of operation and high and low operating range.
Direction change on joystick and switchable high/low range.
TIRES Several types available. See Section 2.
FRONT/REAR AXLES Standard front differential and rear limited slip axles, optional high speed 25mph standard front axle
or high speed limited slip differential 25mph axles. Optional front and rear limited slip differentials available
for superior traction.
BRAKES Inboard wet disc brakes on rear axle. Park brake in center casing of rear axle
ELECTRICS 12 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
80 amp alternator with heavy duty low maintenance battery rated at 870 CCA.
Audible back-up alarm, turn signals and battery isolator.
INSTRUMENTS Audible and visual engine and powertrain warning system monitoring engine oil pressure,
engine coolant temperature, air filter condition, alternator charge, hand brake applied, transmission
oil temperature, oil filter blocked, turn indicators, hazard warning, head lamp main beam.
CAB UNIT SAE certified ROPS/FOPS fully enclosed cab. Low line one-piece windshields and side windows.
Fully adjustable cloth suspension seat, retractable 2 inch seat belt, front windshield washer/ wiper
Loader control lockout mechanism. Operators manual.
CANOPY - Open frame with vinyl seat
HYDRAULICS Single gear pump with 20 GPM (78 LPM) flow. Single servo control lever for lift and tilt functions with direction
control switch. Priority steering valve for accurate handling and safety.
LOADER Loader arm with a general purpose bucket (see Options, Section 3). Parallel fork lift with the use of JCB
pallet forks. One hydraulic circuit with diverter valve for use with hydraulic attachments.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 of 6 409 USD Price Page
409B COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 6587A 6587BCab & AC Canopy
LSD F&R SD F & LS R
SALES Radial Tires Radial Tires
CODE ITEM Tilt Steering Tilt Steering
6587 409B Compact WL Base Machine (72 hp net, 4 cyl. Turbo Charged engine)
406A542 Goodyear 16.0/70-20 SGL
406B303 CAB - High spec with sliding door window
406B304 CANOPY - Four pillars, no glass
406C701 HEATER and AIR CONDITIONING (for use with 406B303 only)
406C702 NO Heater - Canopy 406B304 only
406D551 12.5 mph Limited Slip Differential Front and Rear Axles
406D550 12.5 mph Standard Front Differential and Limited Slip Rear Axles
406E530 3 Spool Servo Joystick Control (w/detented flow for attachments)
406F209 Operator's Handbook / Manual Pack - ENGLISH
406G508 Quickhitch - JCB Hydraulic Locking
406H794 G.P. Loader Bucket 1.3 cu. yd - with Bolt-on Edge 76.5 in wide
406N702 Worklights (2) - Front
406N706 Rotating Beacon
406R700 Full Instrumentation
406R702 Seat - Mech Suspension, Cloth, 3 in Seat Belt
406R703 Seat - Mech Suspension, Vinyl, 3 in Seat Belt
406R707 Radio Installation Kit - Cab machines only, excludes radio.
406R712 In-Cab Quickhitch Isolator
406R701 Tilt and Slide Steering Column
406T522 Auxiliary Relief Valve for 3 Spool controls (406E530)
Shipping Weight - Lbs. 13,231 12,831
Shipping Weight - Kgs. 6,002 5,820
SUGGESTED LIST PRICE $94,490 $87,728
Select one of the following machine PACKAGE BUILD codes. Package build configurations cannot normally be changed. If a
Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options
Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be
fitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 409 USD Price Page
409B COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
6587 409B Compact WL Base Machine (72 hp net, 4 cyl. Turbo Charged engine) $60,947
See cover sheet for items included in base machine
MANUALS (E)
406F209 Operator's Handbook / Manual Pack - ENGLISH $0
TIRES INCLUDING RIMS (E)
406A542 Goodyear 16.0/70-20 SGL $4,222
406A546 Michelin 405/70 R20 XZSL $6,350
406A547 Michelin 400/70 R20 XMCL $5,956
OPERATORS AREA (E)
406B303 CAB - High spec with sliding door window $8,123
406B304 $5,334
CAB CONDITIONING SYSTEMS (E)
406C701 HEATER and AIR CONDITIONING (for use with 406B303 only) $2,515
406C700 HEATER for use with 406B303 only $880
406C702 NO Heater - Canopy 406B304 only $0
TRANSMISSION AND AXLES (E)
406D550 12.5 mph Standard Front Differential and Limited Slip Rear Axles $7,933
406D551 12.5 mph Limited Slip Differential Front and Rear Axles $8,534
406D552 25 mph (40kph) Standard Axles (includes full instrumentation R700) $11,629
406D553 25 mph (40kph) Limited Slip Differential Axles (includes full instrumentation R700) $12,230
AUXILIARY HYDRAULICS (E)
406E530 3 Spool Servo Joystick Control (w/detented flow for attachments) $2,268
406E531 4 Spool Servo Joystick Control (w/detented flow for attachments) $3,649
HYDRAULIC QUICKHITCH (E)
406G508 Quickhitch - JCB Hydraulic Locking $2,256
406G509 No Quickhitch - Transport Linkage Only $1,930
CANOPY - Four pillars, no glass
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 409 USD Price Page
409B COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATORS COMPARTMENT OPTIONS
406N706 Rotating Beacon $129
406N702 Worklights (2) - Front $122
406N703 Worklights (2) - Rear for CAB w/heater (NON AC build) $122
406N709 Worklights (2) - Rear for CAB machines with AC. $122
406R708 Fire Extinguisher $199
406R707 Radio Installation Kit - Cab machines only, excludes radio. $133
406R700 Full Instrumentation $280
406R701 Tilt and Slide Steering Column $549
406R702 Seat - Mech Suspension, Cloth, 3 in Seat Belt $316
406R703 Seat - Mech Suspension, Vinyl, 3 in Seat Belt $316
406R705 Seat backrest extension (only available for mech. Suspension seat) $215
406R706 Air Suspension Seat $1,439
406R709 Fan - Face Level for CAB only $175
406R710 Fan - Face Level for CANOPY only $175
OTHER MACHINE OPTIONS
406R712 In-Cab Quickhitch Isolator $724
406R713 Smooth Ride System - Loader Control $1,144
406T522 Auxiliary Relief Valve for 3 Spool controls (406E530) $120
406T523 Auxiliary Relief Valve for 4 Spool controls (406E531) $238
406R716 Creep Speed for cab, heater only builds $1,379
406R717 Creep Speed for canopy builds $1,215
406R718 Creep Speed for cab, heater and air conditioning builds $1,379
406S702 Front Screen Guard $2,465
406S708 Front Light Guards $204
406T527 Bucket Level Indicator $115
Select Optional Equipment as desired within limitations if indicated
All prices and specifications subject to change without notice page 5 of 6 409 USD Price Page
409B COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
QUICKHITCH LOADER BUCKETS
406H793 General Purpose Loader Bucket 1.3 cu. yd - with Teeth. 76.5 in wide $2,971
406H794 G.P. Loader Bucket 1.3 cu. yd - with Bolt-on Edge 76.5 in wide $3,253
406H803 Multipurpose Loader Bucket (6 in 1) 1.2 cu. yd. Teeth (BOE on rear jaw) 76.5 in wide $7,145
406H810 Bucket - Light duty (1.8 cu yd.) with Bolt-on Edge $3,906
OTHER ATTACHMENTS
406H809 42 in Forks and Fork Frame (53 in wide) $1,825
406H790 47 in Forks and Fork Frame (53 in wide) $2,349
Note: Capacity for buckets is for heaped material and does not
include additional capacity with edges or teeth
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 409 USD Price Page
JCB WHEEL LOADER
411 HT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: NOVEMBER 6, 2013
411 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 6, 2013
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic and
fuel tanks with convenient cleanout ports. Full fender coverage that accommodate all tire options.
assisted struts. Articulation locking strut for transporting.
ENGINE JCB Ecomax 4.4 L (269 CID) 4-cylinder turbo-charged engine, water-cooled, direct high pressure injection
with 108 gross HP TIER4i engine,cyclonic air pre-cleaner with scavenge system, single element airfilter,
spin-on filters, water separator, variable speed cooling fan, wide core radiators, single faced cooling pack, thermostart assist and antifreeze to -33 degrees. No serviceable after treatment of exhaust gas.
TRANSMISSION Fully automatic powershift transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control switch on hydraulics
control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.
Transmission underbelly guard for added protection.
TIRES Several types available. See Section 2.
FRONT/REAR AXLES Torque proportioning differentials with outboard planetaries. Optional limited slip differentials available
for superior traction performance.
SERVICE BRAKES Oil immersed and inboard mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission
output shaft.EFFECTIVE: NOVEMBER 6, 2013
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
60 amp alternator with 2 heavy duty low maintenance batteries rated at 850 CCA. Battery isolator
switch located at cab steps. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Center mounted instrument panel, with analogue/digital display gauges (speedometer, fuel, coolant
temperature, transmission temperature, hydraulic temeprature) along with full colour LCD screen
including selectable machine and operator menus along with service diagnostic screens.
Parking brake "on" warning light.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 71 dB(a) internal noise level
(SAE J2105) Dual exterior side view heated mirrors, interior rear view mirror, headrest
and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.
Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes
two headlights, two front and two rear worklights, two tail lights, reverse light, turn signals and
cab mounted flashing beacon. Operator's manual. Roof mounted switch bank for accessory controls.
HYDRAULICS Double gear pump providing an efficient responsive distribution of power with 32.4 GPM.
Load sensing hydraulics. Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic
circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for
improved handling and safety and emergency steer back-up
LOADER Four cylinder geometry for high torque and capacity. Two lift and two tilt cylinders.
Return to dig and height kickout. Lift ram safety strut.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT SECTION - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 of 6 411 HT USA Price Page
411 HT WHEEL LOADER (TIER IlI) U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 6, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 6306A 6306B411HT 411HT
Std Axles Lim. Slip
SALES Bias Tires Radial Tires
CODE ITEM A/C A/C
6650 411 HT Base machine (TIER 4 INTERIM EMISSIONS COMPLIANT)*
600A610 GOODYEAR SGL 15.5 X 25, 12 PLYWITH FENDERS TO SUIT
600A612 MICHELIN XHA 15.5 X 25WITH FENDERS TO SUIT
600B360 FULL CAB:, SLIDING / TINTEDGLASS, FABRIC SUSPENSION SEAT
600C391 FULL CAB HEATER
600D430 STANDARD AXLES, AUTOTRANSMISSION
600D431 LSD AXLES, AUTO TRANSMISSION
600E900 Std. Arms, One Aux. Hyd. Service, 3 spool
600F820 LANGUAGE PACK: NORTH AMERICAN
600J540 Quickhitch - JCB Hydraulic includes Couplings
EFFECTIVE: NOVEMBER 6, 2013GP Bucket - 1.8 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab)
600T562 Auxiliary Relief Valve for 3 spool (for hydraulic attachments)
600N398 Engine Block Heater, 110 Volt
600N395 Folding Beacon
600S434 Front Headlight Box Protection
Shipping Weight - Lbs. 18,950 19,303
Shipping Weight - Kgs 8,596 8,756
SUGGESTED LIST PRICE $138,128 $143,914
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be
fitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 411 HT USA Price Page
411 HT WHEEL LOADER (TIER IlI) U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 6, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
6650 411 HT Base machine (TIER 4 INTERIM EMISSIONS COMPLIANT)* 11,356 5,162 $102,741
MANUALS (E)
600F820 LANGUAGE PACK: NORTH AMERICAN 1 0 $0
600F826 Operators Handbook and Manual Pack, French 1 0 $0
TIRES INCLUDING RIMS (E)
600A610 GOODYEAR SGL 15.5 X 25, 12 PLYWITH FENDERS TO SUIT 1,128 513 $6,217
600A302 Goodyear HRL 15.5-25 12 ply, L3 1,208 549 $7,996
600A613 MICHELIN XTLA 15.5 X 25WITH FENDERS TO SUIT 1,375 625 $8,137
600A612 MICHELIN XHA 15.5 X 25WITH FENDERS TO SUIT 1,481 673 $8,920
OPERATORS AREA (E)
600B360 FULL CAB:, SLIDING / TINTEDGLASS, FABRIC SUSPENSION SEAT 1,320 600 $4,559
600B361 CANOPY CAB OPEN 600 273 $2,191
CAB CONDITIONING SYSTEMS (E)
600C391 FULL CAB HEATER 45 20 $1,780
600C390 NO HEATER BUILD 1 0 $281
600C392 FULL HEATER & AIR CONDITIONING 85 39 $4,654
EFFECTIVE: NOVEMBER 6, 2013TRANSMISSION AND AXLES (E)
STANDARD AXLES, AUTOTRANSMISSION 2,950 1,341 $10,707
600D431 LSD AXLES, AUTO TRANSMISSION 2,950 1,341 $13,790
LOADER ARMS & AUXILIARY HYDRAULICS (E)
600E900 Std. Arms, One Aux. Hyd. Service, 3 spool 30 14 $1,641
600E902 STANDARD HEIGHT ARM, 3 SPOOLMULTI LEVER CONTROLS, // LIFT 60 27 $3,799
600E903 STANDARD HEIGHT ARM, 4 SPOOLMULTI LEVER CONTROLS, // LIFT 60 27 $3,394
600E905 60 27 $4,864
FOR PRICE AND AVAILABILITY.
STANDARD HEIGHT ARM, 4 SPOOL
PROPORTIONAL CONTROLS, // LIFT
* NOTE: FOR HIGH LIFT AND MULTI-LEVER OPTIONS CONTACT JCB PRODUCT MARKETING
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 411 HT USA Price Page
411 HT WHEEL LOADER (TIER IlI) U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 6, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab) 1 0 $283
600R410 Sun Visor 1 0 $31
600R412 Fire Extinguisher 2 1 $258
600R362 Additional Worklights - cab mounted (provides a total of 2 Front/2 Rear) 8 4 $741
600R372 Carbon Filter - Cab Air Intake 0 0 $211
600R421 Seat - Air Suspension, Heated (if LH armrest is needed, order 600R375) 20 9 $1,177
MACHINE PROTECTION OPTIONS
600N393 Electrical Connectors - Epoxy Sealed 2 1 $963
600R363 Windshield Guard - Front & Side 71 32 $2,216
600S434 Front Headlight Box Protection 0 0 $142
600S431 Front Roadlight Guards 0 0 $1,518
600B362 0 0 $7,581
NOTE: For corrosion protection options, contact Product Marketing for sales special pricing.
NOTE: For corrosion protection options, contact Product Marketing for sales special pricing.OTHER MACHINE OPTIONS
600M339 Hydraulic Oil (Bio-degradable ) 0 0 $2,015
EFFECTIVE: NOVEMBER 6, 2013Reverse Smart Alarm (82-112dba, 5 dba above ambient) 0 0 $247
600N398 Engine Block Heater, 110 Volt 2 1 $243
600N395 Folding Beacon 0 0 $167
600T562 Auxiliary Relief Valve for 3 spool (for hydraulic attachments) 1 0 $439
600T563 Auxiliary Relief Valve for 3 & 4 spool (for hydraulic attachments) 2 1 $882
600T560 JCB Smooth Ride System (Load Suspension) 305 139 $4,444
WASTEMASTER FULL CAB: LOWER
GLASS REPLACED WITH METAL
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 411 HT USA Price Page
411 HT WHEEL LOADER (TIER IlI) U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 6, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC QUICKHITCH (FOR USE WITH QUICKHITCH ATTACHMENTS)
600J540 Quickhitch - JCB Hydraulic includes Couplings 620 282 $3,619
600J541 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve 620 282 $4,628
JCB QUICKHITCH LOADER BUCKETS - Require 600J371 or 600J435 hydraulic quickhitch
Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth.
600J346 GP Bucket - 1.6 cu.yd. w/ Teeth - Quickhitch Mount 1,162 528 $5,750
600J347 GP Bucket - 1.6 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 1,219 554 $4,805
600J349 GP Bucket - 1.8 cu.yd. w/ Teeth - Quickhitch Mount 1,393 633 $6,101
600J350 GP Bucket - 1.8 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 1,496 680 $5,590
JCB DIRECT MOUNTED LOADER BUCKETS (NOT for use with Quickhitch)
Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth.
600H343 GP Bucket - 1.6 cu.yd. w/ Teeth 1,183 538 $5,750
600H344 GP Bucket - 1.6 cu.yd. w/ Bolt-on Cutting Edge 1,241 564 $4,805
600H347 GP bucket - 1.8 cu.yd. w/ Bolt-on Cutting Edge 1,499 681 $5,590
OTHER ATTACHMENTS, QUICKHITCH
600J378 Fork Frame and Forks - ITA Class III 59" wide (48" x 4" x 2") 1,063 483 $6,054
EFFECTIVE: NOVEMBER 6, 2013Forks for ITA Carriages 580 264 $2,311
600WA14 Carriage - 72 inch w/ 48" x 5" x 2" Pin-on Floating Forks 1,000 455 $5,566
600WA79 Carriage - 72 inch w/ 48" x 5" x 2" Pin-on HI-BACK Floating Forks 1,045 475 $6,050
600WB06 Carriage - 72 inch w/ 60" x 5" x 2" Pin-on Floating Forks 1,110 505 $5,773
600WB07 Carriage - 72 inch w/ 60" x 5" x 2" Pin-on HI-BACK Floating Forks 1,155 525 $5,913
600WB33 Carriage - 74 inch w/ 48" Forks and SINGLE Top Clamp 1,627 740 $11,674
600WA69 Bucket - 6-in-1- 1.25 cu. yd. w/ Bolt-on Cutting Edge 2,150 977 $11,041
600WA70 Bucket - Scrap Grapple - 2 cu. yd. 2,250 1,023 $11,110
600WB36 Trash Clamp - 1.75 cu.yd. 1,850 841 $9,843
600WA15 Lifting Arm - 3-Stage 1,000 455 $3,945
600WA16 Blank Plate for JCB HT Quickhitch 353 160 $1,726
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 411 HT USA Price Page
JCB WHEEL LOADER
417 HT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: NOVEMBER 6, 2013
417 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 6, 2013
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic
and fuel tanks with convenient cleanout ports. Front and rear fenders with coverage that
accommodate all tire options. One piece rear bonnet with gas assisted struts provides excellent
service acces to engine bay. Articulation locking strut for transporting.
ENGINE JCB Ecomax 4.4 L (269 CID) 4-cylinder turbo-charged engine, water-cooled, direct high pressure
125 gross HP (Tier 4i), cyclonic air pre-cleaner with scavenge system, single element airfilter,
spin-on filters, injection with water separator, variable speed cooling fan, wide core radiators, single
faced cooling pack, thermostart assist and antifreeze to -33 degrees. No serviceable after treatment of
exhaust gas.
TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control switch on hydraulics
control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.
Transmission underbelly guard for added protection.
TIRES Several types available. See Section 2.
FRONT/REAR AXLES Torque proportioning differentials with outboard planetaries. Optional limited slip differentials available
for superior traction performance.
SERVICE BRAKES Oil immersed and inboard mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission
output shaft.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
60 amp alternator with 2 heavy duty low maintenance batteries rated at 850 CCA. Battery isolator
located at cab steps. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Center mounted instrument panel, with analogue/digital display gauges (speedometer, fuel, coolant
temperature, transmission temperature, hydraulic temeprature) along with full colour LCD screen
including selectable machine and operator menus along with service diagnostic screens.
Parking brake "on" warning light.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 74 dB(a) internal noise level
(SAE J2105) Dual exterior side view heated mirrors, interior rear view mirror, headrest,
and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.
Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes
two headlights, two front and two rear worklights, two tail lights, reverse light, turn signals and
cab mounted flashing beacon. Operator's manual. Roof mounted switch bank for accessory controls.
HYDRAULICS Variable displacement piston pump providing an efficient distribution of power with 41 GPM. Load
sensing hydraulics . Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic
circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for improved
handling and safety. Electrically driven emergency steer pump.
LOADER Parallel lift loader end with a general purpose bucket (see Options, Section 3). Four cylinder geometry
for high torque and capacity. Two lift and two tilt cylinders. Return to dig and height kickout. Lift
cylinder safety strut.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT SECTION - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 of 6 416 HT USA Price Page
417 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: NOVEMBER 6, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 6315A 6315B
416HT 416HT
Std Axles Lim. Slip
SALES Radial Tires Radial Tires
CODE ITEM A/C A/C
6654 417 HT Base machine (TIER 4 INTERIM EMISSIONS COMPLIANT) *
600A624 Michelin XTLA 17.5- R25, L2
600B360 FULL CAB:, SLIDING / TINTEDGLASS, FABRIC SUSPENSION SEAT
600C400 FULL HEATER & AIR CONDITIONING
600D435 25 MPH STANDARD AXLES, AUTOTRANSMISSION
600D436 25 MPH LSD AXLES, AUTOTRANSMISSION
600E955 STANDARD HEIGHT ARM, 3 SPOOLSTD CONTROLS, NON //
600F824 Operators Handbook and Manual Pack, English
600J368 GP Bucket - 2.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount
600J540 Quickhitch - JCB Hydraulic includes Couplings
600N398 Engine Block Heater, 110 Volt
600N395 Folding Beacon
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab)
600S434 Front Headlight Box Protection
600T564 Auxiliary Relief Valve for 3 spool (for hydraulic attachments)
Shipping Weight - Lbs. 22,680 22,680
Shipping Weight - Kgs 10,288 10,288
SUGGESTED LIST PRICE $156,820 $160,029
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be
fitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 416 HT USA Price Page
417 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 6, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
6654 417 HT Base machine (TIER 4 INTERIM EMISSIONS COMPLIANT) * 14,405 6,534 $112,962
MANUALS (E)
600F824 Operators Handbook and Manual Pack, English 1 0 $0
600F827 Operators Handbook and Manual Pack, French 1 0 $0
TIRES INCLUDING RIMS (E)
600A621 GOODYEAR SGL 17.5 X 25 12 PLYWITH FENDERS TO SUIT 1,516 689 $7,588
600A622 GOODYEAR HRL 17.5 X 25 16 PLYWITH FENDERS TO SUIT 1,790 814 $9,514
600A624 Michelin XTLA 17.5- R25, L2 1,684 765 $10,796
600A623 MICHELIN XHA 17.5 R25WITH FENDERS TO SUIT 1,887 858 $12,370
OPERATORS AREA (E)
600B360 FULL CAB:, SLIDING / TINTEDGLASS, FABRIC SUSPENSION SEAT 1,320 600 $4,559
600B361 CANOPY CAB OPEN 600 273 $2,191
CAB CONDITIONING SYSTEMS (E)
600C398 NO HEATER BUILD 35 16 $366
600C399 FULL CAB HEATER 45 20 $1,780
600C400 FULL HEATER & AIR CONDITIONING 85 39 $4,654
TRANSMISSION AND AXLES (E)
600D435 25 MPH STANDARD AXLES, AUTOTRANSMISSION 2,950 1,341 $11,135
600D436 25 MPH LSD AXLES, AUTOTRANSMISSION 2,950 1,341 $14,344
LOADER ARMS & AUXILIARY HYDRAULICS (E)
Standard
600E955 STANDARD HEIGHT ARM, 3 SPOOLSTD CONTROLS, NON // 30 14 $1,775
600E956 STANDARD HEIGHT ARM, 3 SPOOLPROPORTIONAL CONTROLS, NON // 60 27 $4,248
600E957 STANDARD HEIGHT ARM, 4 SPOOLMULTI LEVER CONTROLS, NON // 60 27 $3,661
600E959 60 27 $4,692
Super High-Lift
600E967 HIGH LIFT ARM, 3 SPOOL STDCONTROLS, NON // 300 136 $9,842
600E966 HIGH LIFT ARM, 3 SPOOL MULTILEVER CONTROLS, NON // 330 150 $11,004
* NOTE: FOR MULTI-LEVER CONTROL OPTION CONTACT JCB PRODUCT MARKETING
FOR PRICE AND AVAILABILITY.
STANDARD HEIGHT ARM, 4 SPOOL
PROPORTIONAL CONTROLS, NON //
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 416 HT USA Price Page
417 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: NOVEMBER 6, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OTHER OPERATORS COMPARTMENT OPTIONS
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab) 1 0 $283
600R410 Sun Visor 1 0 $31
600R412 Fire Extinguisher 2 1 $258
600R362 Additional Worklights - cab mounted (provides a total of 2 Front/2 Rear) 8 4 $741
600R372 Carbon Filter - Cab Air Intake 0 0 $211
600R421 Seat - Air Suspension, Heated (if LH armrest is needed, order 600R375) 20 9 $1,177
MACHINE PROTECTION OPTIONS
600N393 Electrical Connectors - Epoxy Sealed 2 1 $963
600R363 Windshield Guard - Front & Side 71 32 $2,216
600S434 Front Headlight Box Protection 0 0 $142
600S431 Front Roadlight Guards 0 0 $1,518
600B362 0 0 $7,581
NOTE: For corrosion protection options, contact Product Marketing for sales special pricing.
OTHER MACHINE OPTIONS
600N390 Reverse Smart Alarm (82-112dba, 5 dba above ambient) 0 0 $247
600N398 Engine Block Heater, 110 Volt 2 1 $243
600N395 Folding Beacon 0 0 $167
600T560 JCB Smooth Ride System (Load Suspension) 305 139 $4,444
600T569 Transmission Cooler Bypass System (Quick heat of Transmission oil) 0 0 $839
600T564 Auxiliary Relief Valve for 3 spool (for hydraulic attachments) 1 0 $439
600T565 Auxiliary Relief Valve for 3 & 4 spool (for hydraulic attachments) 2 1 $882
WASTEMASTER FULL CAB: LOWER
GLASS REPLACED WITH METAL
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 416 HT USA Price Page
417 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC QUICKHITCH (for use with Quickhitch Attachments)
600J540 Quickhitch - JCB Hydraulic includes Couplings 620 282 $3,619
600J543 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve 620 282 $4,715
JCB QUICKHITCH LOADER BUCKETS - Requires 600J371 or 600J444 hydraulic quickhitch
Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth.
600J349 GP Bucket - 1.8 cu.yd. w/ Teeth - Quickhitch Mount 1,393 633 $6,101
600J350 GP Bucket - 1.8 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 1,496 680 $5,590
600J367 GP Bucket - 2.1 cu.yd. w/ Teeth - Quickhitch Mount 1,481 673 $6,580
600J368 GP Bucket - 2.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 1,581 719 $6,046
JCB DIRECT MOUNTED LOADER BUCKETS (NOT for use with Quickhitch)
Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth.
600H347 GP bucket - 1.8 cu.yd. w/ Bolt-on Cutting Edge 1,499 681 $5,590
600H349 GP Bucket - 2.1 cu.yd. w/ Teeth 1,514 688 $6,580
600H350 GP Bucket - 2.1 cu.yd. w/ Bolt-on Cutting Edge 1,571 714 $6,046
OTHER ATTACHMENTS, QUICKHITCH
600J378 Fork Frame and Forks - ITA Class III 59" wide (48" x 4" x 2") 1,063 483 $6,054
600WB42 Forks for ITA Carriages 580 264 $2,311
600WA14 Carriage - 72 inch w/ 48" x 5" x 2" Pin-on Floating Forks 1,000 455 $5,566
600WA79 Carriage - 72 inch w/ 48" x 5" x 2" Pin-on HI-BACK Floating Forks 1,045 475 $6,050
600WB06 Carriage - 72 inch w/ 60" x 5" x 2" Pin-on Floating Forks 1,110 505 $5,773
600WB07 Carriage - 72 inch w/ 60" x 5" x 2" Pin-on HI-BACK Floating Forks 1,155 525 $5,913
600WB33 Carriage - 74 inch w/ 48" Forks and SINGLE Top Clamp 1,627 740 $11,674
600WA86 Bucket - 6-in-1 - 1.75 cu. yd. w/ Bolt-on Cutting Edge 2,200 1,000 $12,322
600WB37 Trash Clamp - 2.25 cu.yd. 2,350 1,068 $10,501
600WA15 Lifting Arm - 3-Stage 1,000 455 $3,945
600WA16 Blank Plate for JCB HT Quickhitch 353 160 $1,726
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 416 HT USA Price Page
JCB WHEEL LOADER
427 HT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: OCTOBER 11, 2013
427 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic and
fuel tanks with convenient cleanout ports. Front fenders. Side panels and rear engine access with gas
assisted struts. Articulation locking strut for transporting
ENGINE 6.7 L (409 CID) 6-cylinder, 6.7 liter Cummins QSB diesel, variable geometry turbocharger,
diesel oxidation catalyst, exhaust gas reciruculation, air scavenge system, low idle feature
Tier IV Interm, dual element air cleaner, spin-on filters, water separator, thermostart assist and
antifreeze to -33 degrees.
TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control switch on hydraulics
control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.
Transmission underbelly guard for added protection
TIRES Several types available, see section 2.
FRONT/REAR AXLE Open differential with outboard planetaries. Optional limited slip differentials available
for superior traction performance. Optional open differentials with automatic differential locking.
All axle types include sinter-lined pads to provide increased resistance to heat
and wear with the multi-disc brake system.
SERVICE BRAKES Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission
output shaft.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
70 amp alternator with 2 heavy duty low maintenance batteries rated at 850 CCA. Battery disconnect
switch located in battery compartment. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Audible and visual engine and powertrain warning system with front mounted instrument panel
including speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature
gauge, clock and automatic emergency engine shut-down system.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 75 dB(a) internal noise level
(SAE J2105) Dual heated exterior side view mirrors, two interior rear view mirrors, headrest
and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.
Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes
two headlights, two front worklights, two rear worklights, two tail lights, reverse light, turn signals
and cab mounted flashing beacon. Operator's manual.
HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and responsive
distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic
circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for improved handling and
safety and an electric emergency steering pump.
LOADER Parallel lift loader end with a general purpose bucket (see Options, Section 3). Four cylinder geometry
for high torque and capacity. Two lift and two tilt cylinders. Return to dig and height kickout. Lift ram
safety strut.
WARRANTY 2 Year full coverage warranty (please see the machine warranty certificate for details)
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 of 6 426 HT USA Price Page
427 HT WHEEL LOADER U.S. DOLLAR PRICE PAGES F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
*JCB BRANDED RADIAL FITTED TO PACKAGE BUILDS "B" AND "C"
PACKAGE BUILD CODE: 6751A 6751B 6751C
427HT 427HT 427HT
HD Axles LSD LSD
Bias Tires Radial Tires Radial Tires
SALES Rear Fenders Rear Fenders
CODE ITEM SRS
6751 427 HT Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT)*
600A392 Goodyear SGL 20.5-25 12 ply, L2
600A484 JCB Radial GPR 20.5 R25 L3
600B348 CAB, ROPS/FOPS - includes 3 inch seatbelt
600C385 A/C and Heater System w/ Radiator Debris Guard
600D412
600D413 Heavy Duty Limited Slip Axles with Automatic Powershift
600E834 Std. Arms, One Aux. Hyd. Service, 3 spool
600F680 Operators Handbook and Manual Pack, English
600J361 GP Bucket - 2.7 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount
600J500 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (Standard height loader arms)
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab)
600N371 #N/A
600S421 Fenders - Wide Rear
600T507 JCB Smooth Ride System (Load suspension)
600T347 Auxiliary Relief Valve for 3 spool (for hydraulic attachments)
600T419 Additional Counterwieght - additional 860lbs
Shipping Weight - Lbs. #N/A #N/A #N/A
Shipping Weight - Kgs. #N/A #N/A #N/A
SUGGESTED LIST PRICE #N/A #N/A #N/A
Heavy Duty Standard Axles - Open Differential with Automatic Powershift
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements
please order a machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted
to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 426 HT USA Price Page
427 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
6751 427 HT Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT)* 19,046 8,657 $149,490
MANUALS (E)
600F680 Operators Handbook and Manual Pack, English 1 0 $0
600F681 Operators Handbook and Manual Pack, French 1 0 $0
TIRES INCLUDING RIMS (E)
600A392 Goodyear SGL 20.5-25 12 ply, L2 1,877 853 $9,912
600A394 Michelin XTLA 20.5 - R25, L2 1,648 749 $11,531
600A395 Michelin XHA 20.5 - R25, L3 2,020 918 $13,815
600A397 Michelin XLDD2A 20.5 X 25 3,400 1,545 $22,753
600A472 JCB Sitemaster Crossply 20.5, 16ply, L2 1,640 745 $8,099
600A484 JCB Radial GPR 20.5 R25 L3 2,020 918 $9,338
OPERATORS AREA (E)
600B348 CAB, ROPS/FOPS - includes 3 inch seatbelt 1,320 600 $4,496
600B349 CAB - Wastemaster - ROPS/FOPS - Lower glass panels replaced with metal panels 1,320 600 $4,496
600B352 CANOPY - Open ROPS/FOPS - includes 3 inch seatbelt 600 273 $2,204
CAB CONDITIONING SYSTEMS (E)
600C385 A/C and Heater System w/ Radiator Debris Guard 85 39 $4,587
600C387 Automatic Claimate Control - A/C and Heater System 85 39 $4,690
TRANSMISSION AND AXLES (E)
600D412 Heavy Duty Standard Axles - Open Differential with Automatic Powershift 0 0 $9,794
600D413 Heavy Duty Limited Slip Axles with Automatic Powershift 0 0 $12,597
600D425 Heavy Duty Standard Axles with Automatic Differential Lock on Front Axle 3,200 1,455 $12,340
LOADER ARMS & AUXILIARY HYDRAULICS (E)
STANDARD
600E834 Std. Arms, One Aux. Hyd. Service, 3 spool 60 27 $2,380
600E835 Std. Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick-Mounted Proportional Buttons 60 27 $4,698
600E837 Std. Arms, Two Aux. Hyd. Services, 3 & 4 spool with changeover switch 60 27 $4,466
600E838 60 27 $5,035
HIGH LIFT
600E840 High lift loader arms, One Aux Hyd service, 3 spool 655 298 $10,390
600E841 High lift loader arms, One Aux Hyd Ssrvice, 3 spool w/ joystick mounted proportional buttons 655 298 $11,975
600E843 High lift loader arms, Two Aux Hyd service, 3 & 4 spool with changeover switch 655 298 $11,295
600E844 655 298 $12,848
* NOTE: FOR MULTI-LEVER CONTROL OPTION CONTACT JCB PRODUCT MARKETING
FOR PRICE AND AVAILABILITY.
Std. Arms, Two Aux. Hyd. Services, 3 & 4 spool w/ Joystick-Mounted Proportional Button Control
w/ Changeover Switch for 4th spool
High lift loader arms, Two Aux Hyd service, 3& 4 spool w/ joystick mounted proportional buttons
and changeover switch
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 426 HT USA Price Page
427 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab) 1 0 $283
600R362 Additional Worklights - cab mounted (provides a total of 2 Front/2 Rear) 8 4 $741
600R365 Sun Visor 1 0 $30
600R401 Seat - Air Suspension, Heated (if LH armrest is needed, order 600R375) 20 9 $1,110
600R372 Carbon Filter - Cab Air Intake 0 0 $211
600R375 LH Armrest for air suspension seat 1 0 $0
600R379 Fire Extinguisher 2 1 $243
MACHINE PROTECTION OPTIONS
600M627 Widecore Radiator / Heat and AC builds only 0 0 $1,225
600M628 Widecore Radiator / Automatic Climate Control Builds Only 0 0 $1,225
600M629 Epoxy Coated Cooling Pack for Heat and A/C builds Only 0 0 $1,168
600M634 0 0 $2,552
600N346 #N/A #N/A #N/A #N/A
600R363 Windshield Guard - Front & Side 71 32 $2,216
NOTE: For additional corrosion protection options contact Product Marketing for sales special pricing.
OTHER MACHINE OPTIONS
600N341 Reverse Smart Alarm (82-112dba, 5 dba above ambient) 0 0 $248
600N343 #N/A #N/A #N/A #N/A
600N371 #N/A #N/A #N/A #N/A
600S421 Fenders - Wide Rear 0 0 $1,325
600T507 JCB Smooth Ride System (Load suspension) 305 139 $5,113
600T347 Auxiliary Relief Valve for 3 spool (for hydraulic attachments) 1 0 $426
600T348 Auxiliary Relief Valve for 3 & 4 spool (for hydraulic attachments) 2 1 $856
600T426 Cooling Fan - Auto Reverse 1 0 $1,385
600T419 Additional Counterwieght - additional 860lbs 837 380 $1,488
600T505 Transmission Cooler Bypass System (Quick heat of Transmission oil) 0 0 $815
600M687 5 Speed Transmission With Lock up Torque Converter (Standard Arms) 0 0 $7,957
600M690 5 Speed Transmission With Lock up Torque Converter (High Lift Arms) 0 0 $7,957
Epoxy Coated Widecore Radiator for Heat and A/C builds Only
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 426 HT USA Price Page
427 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC QUICKHITCH - FOR USE WITH QUICKHITCH ATTACHMENTS
600J500 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (Standard height loader arms) 638 290 $5,319
600J501 638 290 $5,319
JCB QUICKHITCH MOUNTED LOADER BUCKETS - Require 600J385 or 600J432 hydraulic quickhitch
Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth
600J356 GP Bucket - 2.3 cu.yd. w/ Teeth - Quickhitch Mount 1,766 803 $8,096
600J360 GP Bucket - 2.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 1,823 829 $6,748
600J357 GP Bucket - 2.6 cu.yd. w/ Teeth - Quickhitch Mount 1,871 850 $8,567
600J361 GP Bucket - 2.7 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 1,928 876 $7,249
600J358 GP Bucket - 3.0 cu.yd. w/ Teeth - Quickhitch Mount 2,394 1,088 $10,245
600J362 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 2,451 1,114 $8,409
JCB DIRECT MOUNT LOADER BUCKETS (NOT for use w/ 600J385 or 600J432 Quickhitch)
600H355 GP Bucket - 2.3 cu.yd. w/ Teeth 1,766 803 $8,096
600H359 GP Bucket - 2.5 cu.yd. w/ Bolt-on Cutting Edge 1,823 829 $6,749
600H356 GP Bucket - 2.6 cu.yd. w/ Teeth 1,871 850 $8,567
600H360 GP Bucket - 2.7 cu.yd. w/ Bolt-on Cutting Edge 1,928 876 $7,221
600H357 GP Bucket - 3.0 cu.yd. w/ Teeth 2,453 1,115 $10,235
600H361 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge 2,529 1,150 $8,401
OTHER ATTACHMENTS, QUICKHITCH MOUNTED (Require 600J385 or 600J432)
600J378 Fork Frame and Forks - ITA Class III 59" wide (48" x 4" x 2") 1,063 483 $6,054
600WA14 Carriage - 72 inch w/ 48" x 5" x 2" Pin-on Floating Forks 1,000 455 $5,733
600WA79 Carriage - 72 inch w/ 48" x 5" x 2" Pin-on HI-BACK Floating Forks 1,045 475 $6,050
600WB06 Carriage - 72 inch w/ 60" x 5" x 2" Pin-on Floating Forks 1,110 505 $5,946
600WB07 Carriage - 72 inch w/ 60" x 5" x 2" Pin-on HI-BACK Floating Forks 1,155 525 $6,090
600WB38 Carriage - 96 inch w/ 72" x 6" x 2" Pin-on Floating Forks. 1,400 636 $8,298
600WB39 Carriage - 96 inch w/ 72" x 6" x 2" Pin-on HI-BACK Forks. 1,155 525 $8,511
600WB33 Carriage - 74 inch w/ 48" Forks and SINGLE Top Clamp 1,627 740 $11,674
600WB40 Carriage - 74 inch w/ 48" HI-BACK Forks and SINGLE Top Clamp 1,680 764 $11,429
600WB08 Carriage - 74 inch w/ 48" Forks and DUAL Top Clamp 1,627 740 $12,872
600WB41 Carriage - 74 inch w/ 48" HI-BACK Forks and DUAL Top Clamp 1,680 764 $13,013
600WB18 Bucket - 6-in-1 - 2.75 cu. yd. 3,200 1,455 $16,315
600WA98 Bucket - 6-in-1 - 2.25 cu. yd. 2,600 1,182 $12,515
600WB02 Bucket - Scrap Grapple - 3.0 cy, 107" wide Quickhitch Mounted 2,950 1,341 $13,356
600WA15 Lifting Arm - 3-Stage 1,000 455 $3,945
600WA16 Blank Plate for JCB HT Quickhitch 353 160 $1,726
Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (For High Lift Loader arms)
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 426 HT USA Price Page
JCB WHEEL LOADER
427 ZX
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: OCTOBER 11, 2013
427 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE OCTOBER 11, 2013
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic and
fuel tanks with convenient cleanout ports. Front fenders. Side panels and rear engine access with gas
assisted struts. Articulation locking strut for transporting
ENGINE 6.7 L (409 CID) 6-cylinder, 6.7 liter Cummins QSB diesel, variable geometry turbocharger,
diesel oxidation catalyst, exhaust gas reciruculation, air scavenge system, low idle feature
Tier IV Interm, dual element air cleaner, spin-on filters, water separator, thermostart assist and
antifreeze to -33 degrees.
TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control switch on hydraulics
control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.
Transmission underbelly guard for added protection
TIRES Several types available, see section 2.
FRONT/REAR AXLE Open differential with outboard planetaries. Optional limited slip differentials available
for superior traction performance. Optional open differentials with automatic differential locking.
All axle types include sinter-lined pads to provide increased resistance to heat
and wear with the multi-disc brake system.
SERVICE BRAKES Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission
EFFECTIVE: OCTOBER 11, 2013 output shaft.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
70 amp alternator with 2 heavy duty low maintenance batteries rated at 850 CCA. Battery disconnect
switch located in battery compartment. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Audible and visual engine and powertrain warning system with front mounted instrument panel
including speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature
gauge, clock and automatic emergency engine shut-down system. Parking brake "on" warning light.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 75 dB(a) internal noise level
(SAE J2105) Dual heated exterior side view mirrors, two interior rear view mirrors, headrest,
and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.
Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes
two headlights, two front worklights, two rear worklights, two tail lights, reverse light, turn signals
and cab mounted flashing beacon. Operator's manual.
HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and responsive
distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic
circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for improved handling and
safety and an electric emergency steering pump.
LOADER Z-bar loader end with a general purpose bucket (see buckets, section 2). Z-bar geometry for high
breakout torque and capacity. Two lift and one tilt cylinders. Return to dig and height kickout.
Lift ram safety strut.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 of 6 426 ZX USA Price Page
427 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
*JCB BRANDED RADIAL FITTED TO PACKAGE BUILDS "B" AND "C"
PACKAGE BUILD CODE: 6754A 6754B 6754C427ZX 427ZX 427ZX
HD Axles LSD LSD
Bias Tires Radial Tires Radial Tires
SALES Rear Fenders Rear Fenders
CODE ITEM SRS
6754 427ZX Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT)
600A392 Goodyear SGL 20.5-25 12 ply, L2
600A484 JCB Radial GPR 20.5 R25 L3
600B348 CAB, ROPS/FOPS - includes 3 inch seatbelt
600C387 Automatic Claimate Control - A/C and Heater System
600D412
600D413 Heavy Duty Limited Slip Axles with Automatic Powershift
EFFECTIVE: OCTOBER 11, 2013Std. Arms, One Aux. Hyd. Service, 3 spool
600F680 Operators Handbook and Manual Pack, English
600H379 GP Bucket - 2.6 cu.yd. w/ Bolt-on Cutting Edge
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab)
600N371 Folding Beacon
600S421 Fenders - Wide Rear
600T507 JCB Smooth Ride System (Load suspension)
600T347 Auxiliary Relief Valve for 3 spool (for hydraulic attachments)
600T419 Additional Counterwieght - additional 860lbs
Shipping Weight - Lbs. 25,124 25,267 25,572
Shipping Weight - Kgs. 11,396 11,461 11,599
SUGGESTED LIST PRICE $184,569 $188,122 $193,235
Heavy Duty Standard Axles - Open Differential with Automatic Powershift
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted
to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 426 ZX USA Price Page
427 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
6754 427ZX Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT) 19,049 8,659 $143,688
MANUALS (E)
600F680 Operators Handbook and Manual Pack, English 1 0 $0
600F681 Operators Handbook and Manual Pack, French 1 0 $0
TIRES INCLUDING RIMS (E)
600A392 Goodyear SGL 20.5-25 12 ply, L2 1,877 853 $9,912
600A394 Michelin XTLA 20.5 - R25, L2 1,648 749 $11,531
600A395 Michelin XHA 20.5 - R25, L3 2,020 918 $13,815
600A397 Michelin XLDD2A 20.5 X 25 3,400 1,545 $22,753
600A472 JCB Sitemaster Crossply 20.5, 16ply, L2 1,640 745 $8,099
600A484 JCB Radial GPR 20.5 R25 L3 2,020 918 $9,338
OPERATORS AREA (E)
600B348 CAB, ROPS/FOPS - includes 3 inch seatbelt 1,320 600 $4,496
600B349 CAB - Wastemaster - ROPS/FOPS - Lower glass panels replaced with metal panels 1,320 600 $4,496
EFFECTIVE: OCTOBER 11, 2013CANOPY - Open ROPS/FOPS - includes 3 inch seatbelt 600 273 $2,270
CAB CONDITIONING SYSTEMS (E)
600C385 A/C and Heater System w/ Radiator Debris Guard 85 39 $4,587
600C387 Automatic Claimate Control - A/C and Heater System 85 39 $4,690
TRANSMISSION AND AXLES (E)
600D412 Heavy Duty Standard Axles - Open Differential with Automatic Powershift 0 0 $9,794
600D413 Heavy Duty Limited Slip Axles with Automatic Powershift 0 0 $12,597
600D425 Heavy Duty Standard Axles with Automatic Differential Lock on Front Axle 3,200 1,455 $12,340
LOADER ARMS & AUXILIARY HYDRAULICS (E)
600E820 Std. Arms, One Aux. Hyd. Service, 3 spool 60 27 $2,380
600E821 Std. Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick-Mounted Proportional Buttons 60 27 $4,791
* NOTE: FOR MULTI-LEVER CONTROL OPTION CONTACT JCB PRODUCT MARKETING
FOR PRICE AND AVAILABILITY.
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 426 ZX USA Price Page
427 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab) 1 0 $283
600R362 Additional Worklights - cab mounted (provides a total of 2 Front/2 Rear) 8 4 $719
600R365 Sun Visor 1 0 $29
600R401 Seat - Air Suspension, Heated (if LH armrest is needed, order 600R375) 20 9 $1,110
600R372 Carbon filter - Cab air intake 0 0 $199
600R375 LH Armrest for air suspension seat 1 0 $0
600R379 Fire Extinguisher 2 1 $250
MACHINE PROTECTION OPTIONS
600M627 Widecore Radiator / Heat and AC builds only 0 0 $1,225
600M628 Widecore Radiator / Automatic Climate Control Builds Only 0 0 $1,225
600M629 Epoxy Coated Cooling Pack for Heat and A/C builds Only 0 0 $1,168
600M634 Epoxy Coated Widecore Radiator for Heat and A/C builds Only 0 0 $2,552
600N346 Electrical Connectors - Epoxy Sealed 2 1 $935
600R363 Windshield Guard - Front & Side 71 32 $2,088
EFFECTIVE: OCTOBER 11, 2013Front Roadlight guards 4 2 $1,483
600T375 Auto Lube (Installed) 30 14 $6,459
NOTE: For additional corrosion protection options contact Product Marketing for sales special pricing.
OTHER MACHINE OPTIONS
600N341 Reverse Smart Alarm (82-112dba, 5 dba above ambient) 0 0 $248
600N343 #N/A #N/A #N/A #N/A
600N371 Folding Beacon 0 0 $162
600S421 Fenders - Wide Rear 0 0 $1,325
600T507 JCB Smooth Ride System (Load suspension) 305 139 $5,113
600T347 Auxiliary Relief Valve for 3 spool (for hydraulic attachments) 1 0 $426
600T348 Auxiliary Relief Valve for 3 & 4 spool (for hydraulic attachments) 2 1 $856
600T426 Cooling Fan - Auto Reverse 1 0 $1,385
600T419 Additional Counterwieght - additional 860lbs 837 380 $1,488
600T505 Transmission Cooler Bypass System (Quick heat of Transmission oil) 0 0 $815
600M691 5 Speed Transmission With Lock up Torque Converter 0 0 $7,957
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 426 ZX USA Price Page
427 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC QUICKHITCH - FOR USE WITH QUICKHITCH ATTACHMENTS
600J502 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (Standard height loader arms) 638 290 $6,245
JCB QUICKHITCH MOUNTED LOADER BUCKETS - Require 600J403 or 600J433 hydraulic quickhitch
Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth
600J356 GP Bucket - 2.3 cu.yd. w/ Teeth - Quickhitch Mount 1,766 803 $8,096
600J360 GP Bucket - 2.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 1,823 829 $6,748
600J357 GP Bucket - 2.6 cu.yd. w/ Teeth - Quickhitch Mount 1,871 850 $8,567
600J361 GP Bucket - 2.7 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 1,928 876 $7,249
600J358 GP Bucket - 3.0 cu.yd. w/ Teeth - Quickhitch Mount 2,394 1,088 $10,245
600J362 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 2,451 1,114 $8,409
JCB DIRECT MOUNT LOADER BUCKETS - NOT FOR USE WITH 600J403 OR 600J433 QUICKHITCH
Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth
600H375 GP Bucket - 2.3 cu.yd. w/ Teeth - 98 in. wide 1,887 858 $8,096
600H376 GP Bucket - 2.3 cu.yd. w/ Bolt-on Cutting Edge 1,814 825 $6,748
600H378 GP Bucket - 2.6 cu.yd. w/ Teeth - 98 in. wide 1,966 894 $8,567
EFFECTIVE: OCTOBER 11, 2013GP Bucket - 2.6 cu.yd. w/ Bolt-on Cutting Edge 1,893 860 $7,249
600H367 GP Bucket - 3.0 cu.yd. w/ Teeth 2,670 1,214 $10,245
600H368 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge 2,727 1,240 $8,409
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 426 ZX USA Price Page
JCB WHEEL LOADER
437 HT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: OCTOBER 11, 2013
437 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic and
fuel tanks with convenient cleanout ports. Front fenders. Side panels and rear engine access with gas
assisted struts. Articulation locking strut for transporting.
ENGINE 6.7 L (409 CID) 6-cylinder turbo-charged, water-cooled direct injection with 173hp gross
Tier 4 Interim, dual element air cleaner, spin-on filters, water separator, thermostart assist and
antifreeze to -33 degrees.
TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control switch on hydraulics
control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.
Transmission underbelly guard added for protection.
TIRES Several types available. See Section 2.
FRONT/REAR AXLES Open differential with outboard planetaries. Optional limited slip differentials available
for superior traction performance. Optional open differentials with automatic differential locking.
All axle types include sinter-lined pads to provide increased resistance to heat
and wear with the multi-disc brake system.
SERVICE BRAKES Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission
output shaft.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
70 amp alternator with 2 heavy duty low maintenance batteries rated at 850 CCA. Battery disconnect
switch located in battery compartment. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Audible and visual engine and powertrain warning system with side mounted instrument panel
including speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature
gauge, clock and automatic emergency engine shut-down system. Parking brake "on" warning light.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 75 dB(a) internal noise level
(SAE J2105) Dual heated exterior side view mirrors, two interior rear view mirrors, headrest
and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.
Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes
two headlights, two front worklights, two rear worklights, two tail lights, reverse light, turn signals
and cab mounted flashing beacon. Operator's manual.
HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and responsive
distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic
circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for improved handling and
safety and an electric emergency steering pump.
LOADER Parallel lift loader end with a general purpose bucket (see Options, Section 3). Four cylinder geometry
for high torque and capacity. Two lift and two tilt cylinders. Return to dig and height kickout. Lift ram
safety strut.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and modernized
fleet control
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 of 6 436 HT USA Price Page
437 HT WHEEL LOADER U.S. DOLLAR PRICE PAGES F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
*JCB BRANDED RADIAL FITTED TO PACKAGE BUILDS "B" AND "C"
PACKAGE BUILD CODE: 6755A 6755B 6755C
437HT 437HT 437HT
HD Axles LSD LSD
Bias Tires Radial Tires Radial Tires
SALES Rear Fenders Rear Fenders
CODE ITEM SRS
6755 437HT Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT)
600A352 Goodyear SGL 20.5 X 25, 12 PLY
600A490 JCB Radial GPR 20.5 R25 L3
600B348 CAB, ROPS/FOPS - includes 3 inch seatbelt
600C385 A/C and Heater System w/ Radiator Debris Guard
600D414 Heavy Duty Standard Axles with Automatic Powershift
600D415 Heavy Duty Limited Slip Axles with Automatic Powershift
600E788 Std. Arms, One Aux. Hyd. Service, 3 spool
600F680 Operators Handbook and Manual Pack, English
600J503 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (Standard height loader arms)
600J366 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab)
600N371 Folding Beacon
600S421 Fenders - Wide Rear
600T507 JCB Smooth Ride System (Load suspension)
600T347 Auxiliary Relief Valve for 3 spool (for hydraulic attachments)
600T419 Additional Counterwieght - additional 860lbs
Shipping Weight - Lbs. 32,481 32,624 32,929
Shipping Weight - Kgs. 14,733 14,798 14,968
SUGGESTED LIST PRICE $223,719 $227,734 $232,847
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted
to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 436 HT USA Price Page
437 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
6755 437HT Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT) 21,845 9,930 $175,238
MANUALS (E)
600F680 Operators Handbook and Manual Pack, English 1 0 $0
600F681 Operators Handbook and Manual Pack, French 1 0 $0
TIRES INCLUDING RIMS (E)
600A352 Goodyear SGL 20.5 X 25, 12 PLY 1,877 853 $9,911
600A354 Michelin XTLA 20.5- R25, L2 1,648 749 $11,531
600A355 Michelin XHA 20.5- R25, L3 2,020 918 $13,816
600A357 Michelin XMine D2 20.5- R25, L5 3,244 1,475 $22,753
600A473 JCB Sitemaster Crossply 20.5, 16ply, L2 1,640 745 $8,139
600A490 JCB Radial GPR 20.5 R25 L3 2,020 918 $9,618
OPERATORS AREA (E)
600B348 CAB, ROPS/FOPS - includes 3 inch seatbelt 1,320 600 $4,496
600B349 CAB - Wastemaster - ROPS/FOPS - Lower glass panels replaced with metal panels 1,320 600 $4,496
600B352 CANOPY - Open ROPS/FOPS - includes 3 inch seatbelt 600 273 $2,204
CAB CONDITIONING SYSTEMS (E)
600C385 A/C and Heater System w/ Radiator Debris Guard 85 39 $4,587
600C387 Automatic Claimate Control - A/C and Heater System 85 39 $4,690
TRANSMISSION AND AXLES (E)
600D414 Heavy Duty Standard Axles with Automatic Powershift 3,200 1,455 $10,416
600D415 Heavy Duty Limited Slip Axles with Automatic Powershift 3,200 1,455 $13,399
600D426 Heavy Duty Standard Axles with Automatic Differential Lock on Front Axle 3,200 1,455 $13,627
LOADER ARMS & AUXILIARY HYDRAULICS (E)
STANDARD
600E788 Std. Arms, One Aux. Hyd. Service, 3 spool 60 27 $2,426
600E789 Std. Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick-Mounted Proportional Buttons 60 27 $4,747
600E791 Std. Arms, Two Aux. Hyd. Services, 3 & 4 spool with changeover switch 60 27 $4,510
600E792 60 27 $5,081
HIGH LIFT
600E794 High lift loader arms, One Aux Hyd service, 3 spool 1,140 518 $10,550
600E795 High lift, One Aux. Hyd. - 3 spool w/ joystick mounted proportional buttons 1,140 518 $11,941
600E797 High Lift, Two Aux. Hyd. Service - 3 & 4 spool with changeover switch 1,140 518 $11,457
600E798 1,140 518 $12,818
SUPER HIGH LIFT
600E812 Super High Lift Arms, One Aux. Hyd. Service, 3 spool 2,610 1,186 $13,546
600E813 Super High Lift Arms, One Aux. Hyd. Service 3 spool 2,610 1,186 $13,340
600E815 Super High Lift Arms, Two Aux. Hyd. Services 3 & 4 spool with changeover switch 2,610 1,186 $15,360
600E816 2,610 1,186 $17,550
* NOTE: FOR MULTI-LEVER CONTROL OPTION CONTACT JCB PRODUCT MARKETING
FOR PRICE AND AVAILABILITY.
High Lift, Two Aux. Hyd. Service - 3 & 4 spool w/ joystick mounted proportional buttons;
changeover switch
Super High Lift Arms, Two Aux. Hyd. Services 3 & 4 spool joystick mounted proportional buttons;
changeover switch
Std. Arms, Two Aux. Hyd. Services, 3 & 4 spool w/ Joystick-Mounted Proportional Button Control
w/ Changeover Switch for 4th spool
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 436 HT USA Price Page
437 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab) 1 0 $283
600R362 Additional Worklights - cab mounted (provides a total of 2 Front/2 Rear) 8 4 $719
600R365 Sun Visor 1 0 $29
600R401 Seat - Air Suspension, Heated (if LH armrest is needed, order 600R375) 20 9 $1,110
600R372 Carbon filter - Cab air intake 0 0 $199
600R375 LH Armrest for air suspension seat 1 0 $0
600R379 Fire Extinguisher 2 1 $243
MACHINE PROTECTION OPTIONS
600M627 Widecore Radiator / Heat and AC builds only 0 0 $1,225
600M628 Widecore Radiator / Automatic Climate Control Builds Only 0 0 $1,225
600M629 Epoxy Coated Cooling Pack for Heat and A/C builds Only 0 0 $1,168
600M634 Epoxy Coated Widecore Radiator for Heat and A/C builds Only 0 0 $2,552
600N346 Electrical Connectors - Epoxy Sealed 2 1 $935
600R363 Windshield Guard - Front & Side 71 32 $2,088
600S380 Front Roadlight guards 4 2 $1,483
600S383 Rear Roadlight guards 4 2 $966
NOTE: For additional corrosion protection options contact Product Marketing for sales special pricing.
OTHER MACHINE OPTIONS
600N341 Reverse Smart Alarm (82-112dba, 5 dba above ambient) 0 0 $248
600N366 Engine Block Heater, 110 Volt 2 1 $239
600N371 Folding Beacon 0 0 $162
600S421 Fenders - Wide Rear 0 0 $1,325
600T507 JCB Smooth Ride System (Load suspension) 305 139 $5,113
600T347 Auxiliary Relief Valve for 3 spool (for hydraulic attachments) 1 0 $426
600T348 Auxiliary Relief Valve for 3 & 4 spool (for hydraulic attachments) 2 1 $856
600T426 Cooling Fan - Auto Reverse 1 0 $1,385
600T419 Additional Counterwieght - additional 860lbs 837 380 $1,488
600T506 Transmission Cooler Bypass System (Quick heat of Transmission oil) 0 0 $815
600M689 5 Speed Transmission With Lock up Torque Converter (Standard Arms) 0 0 $7,725
600M693 5 Speed Transmission With Lock up Torque Converter (High Lift Arms) 0 0 $7,957
600M694 5 Speed Transmission With Lock up Torque Converter (Super High Lift Arms) 0 0 $7,957
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 436 HT USA Price Page
437 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC QUICKHITCH - FOR USE WITH QUICKHITCH ATTACHMENTS
600J503 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (Standard height loader arms) 638 290 $5,320
600J504 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (For High Lift loader arms) 639 290 5,321 0
JCB QUICKHITCH LOADER BUCKETS - require 600J385 or 600J432 quickhitch
Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth
600J358 GP Bucket - 3.0 cu.yd. w/ Teeth - Quickhitch Mount 2,394 1,088 $10,245
600J362 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 2,451 1,114 $8,409
600J359 GP Bucket - 3.4 cu.yd. w/ Teeth - Quickhitch Mount 2,559 1,163 $10,978
600J366 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 2,616 1,189 $8,966
JCB DIRECT MOUNT LOADER BUCKETS - NOT for use with quickhitch
600H357 GP Bucket - 3.0 cu.yd. w/ Teeth 2,453 1,115 $10,235
600H361 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge 2,529 1,150 $8,401
600H362 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge 2,687 1,221 $8,966
OTHER ATTACHMENTS, QUICKHITCH MOUNTED (Require 600J385 or 600J432 Quickhitch)
600J378 Fork Frame and Forks - ITA Class III 59" wide (48" x 4" x 2") 1,063 483 $5,878
600WA14 Carriage - 72 inch w/ 48" x 5" x 2" Pin-on Floating Forks 1,000 455 $5,566
600WA79 Carriage - 72 inch w/ 48" x 5" x 2" Pin-on HI-BACK Floating Forks 1,045 475 $5,874
600WB06 Carriage - 72 inch w/ 60" x 5" x 2" Pin-on Floating Forks 1,110 505 $5,773
600WB07 Carriage - 72 inch w/ 60" x 5" x 2" Pin-on HI-BACK Floating Forks 1,155 525 $5,913
600WB24 Carriage - 72 inch w/ 72" x 5" x 2" Pin-on Floating Forks 1,220 555 $6,394
600WB25 Carriage - 72 inch w/ 72" x 5" x 2" Pin-on HI-BACK Floating Forks 1,265 575 $6,534
600WB38 Carriage - 96 inch w/ 72" x 6" x 2" Pin-on Floating Forks. 1,400 636 $8,298
600WB39 Carriage - 96 inch w/ 72" x 6" x 2" Pin-on HI-BACK Forks. 1,155 525 $8,511
600WB33 Carriage - 74 inch w/ 48" Forks and SINGLE Top Clamp 1,627 740 $11,334
600WB40 Carriage - 74 inch w/ 48" HI-BACK Forks and SINGLE Top Clamp 1,680 764 $11,429
600WB08 Carriage - 74 inch w/ 48" Forks and DUAL Top Clamp 1,627 740 $12,872
600WB41 Carriage - 74 inch w/ 48" HI-BACK Forks and DUAL Top Clamp 1,680 764 $13,013
600WB18 Bucket - 6-in-1 - 2.75 cu. yd. 3,200 1,455 $16,315
600WA15 Lifting Arm - 3-Stage 1,000 455 $3,830
600WA16 Blank Plate for JCB HT Quickhitch 353 160 $1,676
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 436 HT USA Price Page
JCB WHEEL LOADER
437 ZX
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: OCTOBER 11, 2013
437 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic and
fuel tanks with convenient cleanout ports. Front fenders. Side panels and rear engine access with gas
assisted struts. Articulation locking strut for transporting.
ENGINE 6.7 L (409 CID) 6-cylinder turbo-charged, water-cooled direct injection with 173hp gross
Tier 4 Interim, dual element air cleaner, spin-on filters, water separator, thermostart assist and
antifreeze to -33 degrees.
TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control switch on hydraulics
control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.
Transmission underbelly guard added for protection.
TIRES Several types available. See Section 2.
FRONT/REAR AXLES Open differential with outboard planetaries. Optional limited slip differentials available
for superior traction performance. Optional open differentials with automatic differential locking.
All axle types include sinter-lined pads to provide increased resistance to heat
and wear with the multi-disc brake system.
SERVICE BRAKES Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission
output shaft.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
70 amp alternator with 2 heavy duty low maintenance batteries rated at 850 CCA. Battery disconnect
switch located in battery compartment. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Audible and visual engine and powertrain warning system with front mounted instrument panel
including speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature
gauge, clock and automatic emergency engine shut-down system. Parking brake "on" warning light.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 75 dB(a) internal noise level
(SAE J2105) Dual heated exterior side view mirrors, two interior rear view mirrors, headrest
and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.
Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes
two headlights, two front worklights, two rear worklights, two tail lights, reverse light, turn signals
and cab mounted flashing beacon. Operator's manual.
HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and responsive
distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic
circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for improved handling and
safety and an electric emergency steering pump.
LOADER Z-Bar loader end with a general purpose bucket (see buckets, Section 2). Z-Bar geometry for high
breakout torque and capacity. Two lift and one tilt cylinders. Return to dig and height kickout.
Lift ram safety strut.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and modernized
fleet control.
WARRANTY 2 Year full coverage warranty (please see the machine warranty certificate for details)
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 of 6 436 ZX USA Price Page
437 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
*JCB BRANDED RADIAL FITTED TO PACKAGE BUILDS "B" AND "C"
PACKAGE BUILD CODE: 6753A 6753B 6753C
437ZX 437ZX 437ZX
HD Axles LSD LSD
Bias Tires Radial Tires Radial Tires
SALES Rear Fenders Rear Fenders
CODE ITEM SRS
6753 437ZX Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT)
600A352 Goodyear SGL 20.5 X 25, 12 PLY
600A490 JCB Radial GPR 20.5 R25 L3
600B348 CAB, ROPS/FOPS - includes 3 inch seatbelt
600C385 A/C and Heater System w/ Radiator Debris Guard
600D414
600D415 Heavy Duty Limited Slip Axles with Automatic Powershift
600E828 Std. Arms, One Aux. Hyd. Service, 3 spool
600F680 Operators Handbook and Manual Pack, English
600H370 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab)
600N371 Folding Beacon
600S421 Fenders - Wide Rear
600T507 JCB Smooth Ride System (Load suspension)
600T347 Auxiliary Relief Valve for 3 spool (for hydraulic attachments)
600T419 Additional Counterwieght - additional 860lbs
Shipping Weight - Lbs. 32,104 32,247 32,552
Shipping Weight - Kgs. 14,562 14,627 14,766
SUGGESTED LIST PRICE $209,376 $213,391 $218,504
Heavy Duty Standard Axles with Automatic Powershift
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted to
Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 436 ZX USA Price Page
437 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
6753 437ZX Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT) 21,845 9,930 $166,018
MANUALS (E)
600F680 Operators Handbook and Manual Pack, English 1 0 $0
600F681 Operators Handbook and Manual Pack, French 1 0 $0
TIRES INCLUDING RIMS (E)
600A352 Goodyear SGL 20.5 X 25, 12 PLY 1,877 853 $9,911
600A354 Michelin XTLA 20.5- R25, L2 1,648 749 $11,531
600A355 Michelin XHA 20.5- R25, L3 2,020 918 $13,816
600A357 Michelin XMine D2 20.5- R25, L5 3,244 1,475 $22,753
600A473 JCB Sitemaster Crossply 20.5, 16ply, L2 1,640 745 $8,139
600A490 JCB Radial GPR 20.5 R25 L3 2,020 918 $9,618
OPERATORS AREA (E)
600B348 CAB, ROPS/FOPS - includes 3 inch seatbelt 1,320 600 $4,496
600B349 CAB - Wastemaster - ROPS/FOPS - Lower glass panels replaced with metal panels 1,320 600 $4,496
600B352 CANOPY - Open ROPS/FOPS - includes 3 inch seatbelt 600 273 $2,204
CAB CONDITIONING SYSTEMS (E)
600C385 A/C and Heater System w/ Radiator Debris Guard 85 39 $4,587
600C387 Automatic Claimate Control - A/C and Heater System 85 39 $4,690
TRANSMISSION AND AXLES (E)
600D414 Heavy Duty Standard Axles with Automatic Powershift 3,200 1,455 $10,416
600D415 Heavy Duty Limited Slip Axles with Automatic Powershift 3,200 1,455 $13,399
600D426 Heavy Duty Standard Axles with Automatic Differential Lock on Front Axle 3,200 1,455 $13,627
LOADER ARMS & AUXILIARY HYDRAULICS (E)
600E828 Std. Arms, One Aux. Hyd. Service, 3 spool 60 27 $2,622
600E829 Std. Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick-Mounted Proportional Buttons 60 27 $4,791
* NOTE: FOR MULTI-LEVER CONTROL OPTION CONTACT JCB PRODUCT MARKETING
FOR PRICE AND AVAILABILITY.
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 436 ZX USA Price Page
437 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab) 1 0 $283
600R362 Additional Worklights - cab mounted (provides a total of 2 Front/2 Rear) 8 4 $719
600R365 Sun Visor 1 0 $29
600R401 Seat - Air Suspension, Heated (if LH armrest is needed, order 600R375) 20 9 $1,110
600R372 Carbon filter - Cab air intake 0 0 $199
600R375 LH Armrest for air suspension seat 1 0 $0
600R379 Fire Extinguisher 2 1 $243
MACHINE PROTECTION OPTIONS
600M627 Widecore Radiator / Heat and AC builds only 0 0 $1,225
600M629 Epoxy Coated Cooling Pack for Heat and A/C builds Only 0 0 $1,168
600M634 Epoxy Coated Widecore Radiator for Heat and A/C builds Only 0 0 $2,552
600N346 Electrical Connectors - Epoxy Sealed 2 1 $935
600R363 Windshield Guard - Front & Side 71 32 $2,088
600S380 Front Roadlight guards 4 2 $1,483
600S383 Rear Roadlight guards 4 2 $966
600T377 Auto Lube (Installed) 30 14 $6,369
OTHER MACHINE OPTIONS
600N341 Reverse Smart Alarm (82-112dba, 5 dba above ambient) 0 0 $248
600N358 Camera - Reverse - remote w/ Color LCD in Cab (must order 24v to 12v converter) 18 8 $2,877
600N371 Folding Beacon 0 0 $162
600S421 Fenders - Wide Rear 0 0 $1,325
600T507 JCB Smooth Ride System (Load suspension) 305 139 $5,113
600T347 Auxiliary Relief Valve for 3 spool (for hydraulic attachments) 1 0 $426
600T348 Auxiliary Relief Valve for 3 & 4 spool (for hydraulic attachments) 2 1 $856
600T426 Cooling Fan - Auto Reverse 1 0 $1,385
600T419 Additional Counterwieght - additional 860lbs 837 380 $1,488
600T506 Transmission Cooler Bypass System (Quick heat of Transmission oil) 0 0 $815
600M695 5 Speed Transmission With Lock up Torque Converter 0 0 $7,725
NOTE: For additional corrosion protection options contact Product Marketing for sales special pricing.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 436 ZX USA Price Page
437 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC QUICKHITCH - FOR USE WITH QUICKHITCH ATTACHMENTS
600J502 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (Standard height loader arms) 638 290 $6,245
JCB QUICKHITCH LOADER BUCKETS - require 600J403 or 600J433 quickhitch
Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth
600J358 GP Bucket - 3.0 cu.yd. w/ Teeth - Quickhitch Mount 2,394 1,088 $10,245
600J362 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 2,451 1,114 $8,409
600J359 GP Bucket - 3.4 cu.yd. w/ Teeth - Quickhitch Mount 2,559 1,163 $10,978
600J366 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 2,616 1,189 $8,966
JCB DIRECT MOUNT LOADER BUCKETS - NOT for use with quickhitch
Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth
600H367 GP Bucket - 3.0 cu.yd. w/ Teeth 2,670 1,214 $10,245
600H368 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge 2,727 1,240 $8,409
600H369 GP Bucket - 3.4 cu.yd. w/ Teeth 2,820 1,282 $10,978
600H370 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge 2,877 1,308 $8,966
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 436 ZX USA Price Page
JCB WHEEL LOADER
457 HT
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: OCTOBER 11, 2013
457 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted
hydraulic and fuel tanks with convenient cleanout ports. Steel front and rear fenders, side panels and
rear engine access with gas assisted struts. Articulation locking strut for transporting.
ENGINE 8.9 L (543 CID) 6-cylinder turbo-charged, water-cooled direct injection with 250 gross/249 net HP
Tier 4i, dual element air cleaner, spin-on filters, water separator thermostart assist and antifreeze
to -33 degrees. Integral oil cooler and water pump and self tensioning fan belt. Mesh air intake screens
TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control lever on steering column
and an FNR switch on hydraulic control lever. Automatic transmission disconnect activated by
braking. Transmission underbelly guard for added protection.
TIRES Several types available. See Section 2.
FRONT/REAR AXLES Standard differentials with outboard planetaries. Optional limited slip differentials available for
superior traction performance. Optional automatic locking differential on front axle also available.
SERVICE BRAKES Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions and emergency. Parking brake, electro-hydraulic disc type
operating on transmission output shaft. Applies when engine is shutdown.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
70 amp alternator with 2 heavy duty low maintenance batteries rated at 850 CCA. Battery disconnect
switch located in battery compartment. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Audible and visual engine and powertrain warning system with front mounted instrument panel including
speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature gauge,
clock and auto emergency engine shut-down system. Parking brake "on" warning light & audible alarm.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 71 dB(a) internal noise level (SAE J2105)
Dual heated exterior side view mirrors, two interior rear view mirrors, headrest and sun visor.
Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest. Heater/defroster,
windshield wiper/washer, radio provision with speakers. Lighting package includes two headlights, two
front worklights, two rear worklights, two tail lights, reverse light, turn signals and cab mounted
flashing beacon. Ceiling mounted switch bank for accessory controls. Operator's and service manuals
HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and
responsive distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary
hydraulic circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for
improved handling and safety. Electric emergency steering pump.
LOADER Parallel lift loader end with a general purpose bucket (see buckets, Section 2). Four cylinder geometry
for high attachment torque and capacity. Two lift and two tilt cylinders. Return to dig
and height kickout. Lift cylinder safety strut.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and modernized
fleet control
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 of 6 457 HT USA Price Page
457 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
*JCB BRANDED RADIAL FITTED TO ALL PACKAGE BUILDS
PACKAGE BUILD CODE: 6926A 6926B 6926C457HT 457HT 457HT
SALES Std Axles Lim. Slip Lim. Slip
CODE ITEM SRS
6926 457 HT Base Machine (250 gross, 249 net hp, 6 cyl. TIER 4i engine)
600A491 JCB Radial GPR 23.5 R25 L3
600B343 CAB, ROPS/FOPS - includes 3 inch seatbelt
600C382 A/C and Heater System w/ Radiator Debris Guard
600D423 Heavy Duty Standard Axles with Automatic Differential Lock on Front Axle
600D424 Heavy Duty Standard Axles with Automatic Powershift
600E584 Std. Arms, One Aux. Hyd. Service, 3 spool
600F670 Operators Handbook and Manual Pack, English
600J491 Quickhitch - JCB Hydraulic includes Couplings and electric pin isolator
600J425 GP Bucket - 4.6 cu.yd. w/ Bolt-on Cutting Edge
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab)
600N371 Folding Beacon
600T411 JCB Smooth Ride System (Load Suspension)
600T463 Auxiliary Relief Valve for 3 spool (for hydraulic attachments)
Shipping Weight - Lbs. 44,058 44,058 44,258
Shipping Weight - Kgs. 19,985 19,985 20,075
SUGGESTED LIST PRICE $310,900 $305,492 $311,848
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted
to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 457 HT USA Price Page
457 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
6926 457 HT Base Machine (250 gross, 249 net hp, 6 cyl. TIER 4i engine) 33,399 15,181 $245,533
MANUALS (E)
600F670 Operators Handbook and Manual Pack, English 1 0 $0
600F671 Operators Handbook and Manual Pack, French 1 0 $0
TIRES INCLUDING RIMS (E)
600A491 JCB Radial GPR 23.5 R25 L3 1,648 749 $8,500
600A377 Michelin XMine D2 23.5 - R25, L5 1,887 858 $22,800
600A374 Michelin XHA 23.5 - R25 L3 1,648 749 $10,093
OPERATORS AREA (E)
600B343 CAB, ROPS/FOPS - includes 3 inch seatbelt 1,320 600 $4,426
600B345 CANOPY - Open ROPS/FOPS - includes 3 inch seatbelt 600 273 $2,170
600B344 CAB - Wastemaster - ROPS/FOPS - Lower glass panels replaced with metal panels 1,320 600 $4,426
CAB CONDITIONING SYSTEMS (E)
600C383 Automatic Climate Control - A/C and Heater System 85 39 $5,511
600C382 A/C and Heater System w/ Radiator Debris Guard 85 39 $4,518
600C381 Heat System - Full w/ Radiator Debris Guard 45 20 $1,948
600C384 NO Heater or Blower w/ Radiator Debris Guard (CANOPY only) 34 15 $811
TRANSMISSION AND AXLES (E)
600D422 Heavy Duty Standard Axles with Automatic Differential Lock on Front Axle 3,200 1,455 $16,216
600D423 Heavy Duty Standard Axles with Automatic Powershift 3,200 1,455 $10,808
600D424 Heavy Duty Limited Slip Axles with Automatic Powershift 3,200 1,455 $13,180
LOADER ARMS & AUXILIARY HYDRAULICS (E)
Standard
600E584 Std. Arms, One Aux. Hyd. Service, 3 spool 60 27 $9,653
600E587 Std. Arms, Two Aux. Hyd. Service, 3 & 4 spool with changeover switch 60 27 $11,219
600E585 Std. Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick-Mounted Proportional Buttons 60 27 $12,566
600E588 60 27 $13,090
600E590 Super High Lift Arms, One Aux. Hyd. Service, 3 spool 200 91 $18,440
600E593 Super High Lift Arms, Two Aux. Hyd. Service, 3 & 4 spool with changeover switch 200 91 $18,883
600E591 Super High Lift Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick-Mounted Proportional Buttons 200 91 $19,804
600E594 200 91 $20,039
* NOTE: FOR MULTI-LEVER CONTROL OPTION CONTACT JCB PRODUCT MARKETING
FOR PRICE AND AVAILABILITY.
Std. Arms, Two Aux. Hyd. Service, 3 & 4 spool with JoyStick Mounted Proportional buttons;
changeover switch
Super High Lift Arms, Two Aux. Hyd. Service, 3 & 4 spool with Joystick Mounted Proportional
buttons; changeover switch
Super High-Lift
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 457 HT USA Price Page
457 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab) 1 0 $283
600R362 Additional Worklights - cab mounted (provides a total of 2 Front/2 Rear) 8 4 $719
600R365 Sun Visor 1 0 $29
600R372 Carbon filter - Cab air intake 0 0 $199
600R401 Seat - Air Suspension, Heated (if LH armrest is needed, order 600R375) 20 9 $1,110
600R375 LH Armrest for air suspension seat 1 0 $0
600R379 Fire Extinguisher 2 1 $243
MACHINE PROTECTION OPTIONS
600M680 Radiator - Wide Core (For use in ambient temperatures below 104°F) 10 5 $1,697
600M681 Radiator and Oil Cooler - Epoxy Coated 10 5 $1,675
600M682 Radiator, Oil Cooler and A/C Condenser - Epoxy Coated 10 5 $1,584
600M684 Radiator - Wide Core and A/C Condenser - Epoxy Coated 10 5 $3,366
600N346 Electrical Connectors - Epoxy Sealed 2 1 $935
600R363 Windshield Guard - Front & Side 71 32 $2,088
600S416 Front Roadlight guards 4 2 $1,527
600S417 Rear Roadlight guards 4 2 $995
600T420 Auto Lube (Installed) 30 14 $7,136
600T422 Auto Lube (Installed)- Super high lift arm only 30 14 $7,136
600W010 320 145 $8,952
NOTE: For additional corrosion protection options contact Product Marketing for sales special pricing.
OTHER MACHINE OPTIONS
600M671 5 Speed Tranmission with Lock-up Torque Converter 0 0 $7,866
600M340 Hydraulic Oil (Bio-degradable ) 0 0 $3,408
600N341 Reverse Smart Alarm (82-112dba, 5 dba above ambient) 0 0 $248
600N358 Camera - Reverse - remote w/ Color LCD in Cab (must order 24v to 12v converter) 18 8 $2,877
600N359 Engine Block Heater, 110 Volt 3 1 $239
600N371 Folding Beacon 0 0 $162
600S415 Fenders - Wide Rear 145 66 $1,371
600T411 JCB Smooth Ride System (Load Suspension) 200 91 $6,356
600T424 Cooling Fan - Auto Reverse 1 0 $1,365
600T463 Auxiliary Relief Valve for 3 spool (for hydraulic attachments) 2 1 $434
600T464 Auxiliary Relief Valve for 3 & 4 spool (for hydraulic attachments) 2 1 $926
600T425 Transmission Cooler Bypass System (Quick heat of Transmission oil) 0 0 $839
Wastemaster Package - 457 models (Front/Rear Roadlight Guards, Carbon Cab Air Filter, Screen
Guard, Widecore Radiator, full Wastemaster Belly Guards and Mesh Air Intake Screens.
Select Optional Equipment as desired within limitations if indicated.
A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 457 HT USA Price Page
457 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC QUICKHITCH - FOR USE WITH QUICKHITCH ATTACHMENTS
600J491 Quickhitch - JCB Hydraulic includes Couplings and electric pin isolator 706 321 $7,406
JCB QUICKHITCH LOADER BUCKETS - Require 600J491 Hydraulic Quickhitch
Note: Capacity for buckets is for heaped material
600J424 GP Bucket - 4.3 cu.yd. w/ Teeth 3,371 1,532 $15,728
600J425 GP Bucket - 4.6 cu.yd. w/ Bolt-on Cutting Edge 3,636 1,653 $13,769
600J420 GP Bucket - 4.0 cu.yd. w/ Teeth 3,532 1,605 $14,935
600J421 GP Bucket - 4.3 cu.yd. w/ Bolt-on Cutting Edge 3,813 1,733 $13,065
JCB HT DIRECT MOUNT LOADER BUCKETS (NOT for use with 600J491 Quickhitch)
Note: Capacity for buckets is for heaped material
600H418 GP Bucket - 3.7 cu.yd. w/ Teeth 3,371 1,532 $14,205
600H419 GP Bucket - 3.9 cu.yd. w/ Bolt-on Cutting Edge 3,636 1,653 $12,716
600H420 GP Bucket - 3.9 cu.yd. w/ Teeth & Segmented Cutting Edge 3,636 1,653 $16,029
600H423 GP Bucket - 4.0 cu.yd. w/ Teeth 3,532 1,605 $14,935
600H424 GP Bucket - 4.3 cu.yd. w/ Bolt-on Cutting Edge 3,813 1,733 $13,065
600H425 GP Bucket - 4.6 cu.yd. w/ Teeth & Segmented Cutting Edge 3,797 1,726 $16,633
600H428 GP Bucket - 4.4 cu. yd. w/ Teeth 3,627 1,649 $15,728
600H429 GP Bucket - 4.6 cu. yd. w/ Bolt-on Cutting Edge 3,892 1,769 $13,769
600H430 GP Bucket - 4.6 cu. yd. w/ Teeth & Segmented Cutting Edge 3,892 1,769 $17,239
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 457 HT USA Price Page
JCB WHEEL LOADER
457 ZX
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: OCTOBER 11, 2013
457 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted
hydraulic and fuel tanks with convenient cleanout ports. Steel front and rear fenders, side panels and
rear engine access with gas assisted struts. Articulation locking strut for transporting.
ENGINE 8.9 L (543 CID) 6-cylinder turbo-charged, water-cooled direct injection with 250 gross/249 net HP
Tier 4i, dual element air cleaner, spin-on filters, water separator thermostart assist and antifreeze
to -33 degrees. Integral oil cooler and water pump and self tensioning fan belt. Mesh air intake screens
TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control lever on steering column
and an FNR switch on hydraulic control lever. Automatic transmission disconnect activated by
braking. Transmission underbelly guard for added protection.
TIRES Several types available. See Section 2.
FRONT/REAR AXLES Standard differentials with outboard planetaries. Optional limited slip differentials available for
superior traction performance. Optional automatic locking differential on front axle also available.
SERVICE BRAKES Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions and emergency. Parking brake, electro-hydraulic disc type
operating on transmission output shaft. Applies when engine is shutdown.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
70 amp alternator with 2 heavy duty low maintenance batteries rated at 850 CCA. Battery disconnect
switch located in battery compartment. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Audible and visual engine and powertrain warning system with front mounted instrument panel including
speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature gauge,
clock and auto emergency engine shut-down system. Parking brake "on" warning light & audible alarm.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 71 dB(a) internal noise level (SAE J2105)
Dual heated exterior side view mirrors, two interior rear view mirrors, headrest and sun visor.
Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest. Heater/defroster,
windshield wiper/washer, radio provision with speakers. Lighting package includes two headlights, two
front worklights, two rear worklights, two tail lights, reverse light, turn signals and cab mounted
flashing beacon. Ceiling mounted switch bank for accessory controls. Operator's and service manuals
HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and
responsive distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary
hydraulic circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for
improved handling and safety. Electric emergency steering pump.
LOADER Z-Bar loader end with a general purpose bucket (see buckets, Section 2). Z-Bar geometry for high
breakout torque and capacity. Two lift and one tilt cylinders. Return to dig and height kickout.
Lift ram safety strut.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and modernized
fleet control.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 of 6 457 ZX USA Price Page
457 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
*JCB BRANDED RADIAL FITTED TO ALL PACKAGE BUILDS
PACKAGE BUILD CODE: 6922A 6922B 6922C457ZX 457ZX 457ZX
SALES Std Axles Lim. Slip Lim. Slip
CODE ITEM SRS
6922 457 ZX Base Machine (250 gross, 249 net hp, 6 cyl. TIER 4i engine)
600A491 JCB Radial GPR 23.5 R25 L3
600B343 CAB, ROPS/FOPS - includes 3 inch seatbelt
600C382 A/C and Heater System w/ Radiator Debris Guard
600D423 Heavy Duty Standard Axles with Automatic Differential Lock on Front Axle
600D424 Heavy Duty Standard Axles with Automatic Powershift
600E598 Std. Arms, One Aux. Hyd. Service, 3 spool
600F670 Operators Handbook and Manual Pack, English
600H414 GP Bucket - 4.6 cu. yd. w/ Bolt-on Cutting Edge
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab)
600N371 Folding Beacon
600T411 JCB Smooth Ride System (Load Suspension)
600T410 XD Counter weight
600T463 Auxiliary Relief Valve for 3 spool (for hydraulic attachments)
Shipping Weight - Lbs. 42,551 42,551 42,751
Shipping Weight - Kgs. 19,301 19,301 19,392
SUGGESTED LIST PRICE $293,520 $288,112 $294,468
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted
to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 457 ZX USA Price Page
457 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
6922 457 ZX Base Machine (250 gross, 249 net hp, 6 cyl. TIER 4i engine) 30,578 13,899 $239,116
MANUALS (E)
600F670 Operators Handbook and Manual Pack, English 1 0 $0
600F671 Operators Handbook and Manual Pack, French 1 0 $0
TIRES INCLUDING RIMS (E)
600A491 JCB Radial GPR 23.5 R25 L3 1,648 749 $8,500
600A377 Michelin XMine D2 23.5 - R25, L5 1,887 858 $22,800
600A374 Michelin XHA 23.5 - R25 L3 1,648 749 $10,093
OPERATORS AREA (E)
600B343 CAB, ROPS/FOPS - includes 3 inch seatbelt 1,320 600 $4,426
600B345 CANOPY - Open ROPS/FOPS - includes 3 inch seatbelt 600 273 $2,170
600B344 CAB - Wastemaster - ROPS/FOPS - Lower glass panels replaced with metal panels 1,320 600 $4,426
CAB CONDITIONING SYSTEMS (E)
600C383 Automatic Climate Control - A/C and Heater System 85 39 $5,511
600C382 A/C and Heater System w/ Radiator Debris Guard 85 39 $4,518
600C381 Heat System - Full w/ Radiator Debris Guard 45 20 $1,948
600C384 NO Heater or Blower w/ Radiator Debris Guard (CANOPY only) 34 15 $811
TRANSMISSION AND AXLES (E)
600D422 Heavy Duty Standard Axles with Automatic Differential Lock on Front Axle 3,200 1,455 $16,216
600D423 Heavy Duty Standard Axles with Automatic Powershift 3,200 1,455 $10,808
600D424 Heavy Duty Limited Slip Axles with Automatic Powershift 3,200 1,455 $13,180
LOADER ARMS & AUXILIARY HYDRAULICS (E)
600E598 Std. Arms, One Aux. Hyd. Service, 3 spool 60 27 $3,820
600E599 Std. Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick-Mounted Proportional Buttons 60 27 $4,836
600E665 High lift loader arms, One Aux Hyd service, 3 spool 745 339 $15,751
* NOTE: FOR MULTI-LEVER CONTROL OPTION CONTACT JCB PRODUCT MARKETING
FOR PRICE AND AVAILABILITY.
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 457 ZX USA Price Page
457 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab) 1 0 $283
600R362 Additional Worklights - cab mounted (provides a total of 2 Front/2 Rear) 8 4 $719
600R365 Sun Visor 1 0 $29
600R372 Carbon filter - Cab air intake 0 0 $199
600R401 Seat - Air Suspension, Heated (if LH armrest is needed, order 600R375) 20 9 $1,110
600R375 LH Armrest for air suspension seat 1 0 $0
600R379 Fire Extinguisher 2 1 $243
MACHINE PROTECTION OPTIONS
600M680 Radiator - Wide Core (For use in ambient temperatures below 104°F) 10 5 $1,697
600M681 Radiator and Oil Cooler - Epoxy Coated 10 5 $1,675
600M682 Radiator, Oil Cooler and A/C Condenser - Epoxy Coated 10 5 $1,584
600M684 Radiator - Wide Core and A/C Condenser - Epoxy Coated 10 5 $3,366
600N346 Electrical Connectors - Epoxy Sealed 2 1 $935
600R363 Windshield Guard - Front & Side 71 32 $2,088
600S416 Front Roadlight guards 4 2 $1,527
600S417 Rear Roadlight guards 4 2 $995
600T421 Auto Lube (Installed) 30 14 $7,136
600T493 Hose Guards (3 - spool machines only) - Steel wrapped hoses on lift and bucket cylinders 0 0 $1,312
600W010 320 145 $8,952
NOTE: For additional corrosion protection options contact Product Marketing for sales special pricing.
OTHER MACHINE OPTIONS
600M671 5 Speed Tranmission with Lock-up Torque Converter 0 0 $7,866
600M340 Hydraulic Oil (Bio-degradable ) 0 0 $3,408
600N341 Reverse Smart Alarm (82-112dba, 5 dba above ambient) 0 0 $248
600N358 Camera - Reverse - remote w/ Color LCD in Cab (must order 24v to 12v converter) 18 8 $2,877
600N359 Engine Block Heater, 110 Volt 3 1 $239
600N371 Folding Beacon 0 0 $162
600S415 Fenders - Wide Rear 145 66 $1,371
600T411 JCB Smooth Ride System (Load Suspension) 200 91 $6,356
600T410 XD Counter weight 1,764 802 $2,276
600T424 Cooling Fan - Auto Reverse 1 0 $1,365
600T463 Auxiliary Relief Valve for 3 spool (for hydraulic attachments) 2 1 $434
600T425 Transmission Cooler Bypass System (Quick heat of Transmission oil) 0 0 $839
Wastemaster Package - 457 models (Front/Rear Roadlight Guards, Carbon Cab Air Filter, Screen
Guard, Widecore Radiator, full Wastemaster Belly Guards and Mesh Air Intake Screens.
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 457 ZX USA Price Page
457 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC QUICKHITCH - FOR USE WITH QUICKHITCH ATTACHMENTS
600J490 Quickhitch - JCB Hydraulic includes Couplings and electric pin isolator 706 321 $7,406
JCB QUICKHITCH LOADER BUCKETS - Require 600J490 Hydraulic Quickhitch
Note: Capacity for buckets is for heaped material
600J420 GP Bucket - 4.0 cu.yd. w/ Teeth 3,532 1,605 $14,935
600J421 GP Bucket - 4.3 cu.yd. w/ Bolt-on Cutting Edge 3,813 1,733 $13,065
600J424 GP Bucket - 4.3 cu.yd. w/ Teeth 3,371 1,532 $15,728
600J425 GP Bucket - 4.6 cu.yd. w/ Bolt-on Cutting Edge 3,636 1,653 $13,769
JCB DIRECT MOUNT ZX LOADER BUCKETS - 110 in. wide (NOT for use with 600J490 Quickhitch)
Note: Capacity for buckets is for heaped material
600H397 GP Bucket - 3.7 cu.yd. w/ Teeth 3,371 1,532 $14,211
600H398 GP Bucket - 3.9 cu.yd. w/ Bolt-on Cutting Edge 3,636 1,653 $12,722
600H403 GP Bucket - 3.9 cu.yd. w/ Teeth & Segmented Cutting Edge 3,636 1,653 $16,035
600H400 GP Bucket - 4.0 cu.yd. w/ Teeth 3,532 1,605 $14,935
600H401 GP Bucket - 4.3 cu.yd. w/ Bolt-on Cutting Edge 3,813 1,733 $13,065
600H404 GP Bucket - 4.3 cu.yd. w/ Teeth & Segmented Cutting Edge 3,797 1,726 $16,633
600H413 GP Bucket - 4.3 cu. yd. w/ Teeth 3,627 1,649 $15,726
600H414 GP Bucket - 4.6 cu. yd. w/ Bolt-on Cutting Edge 3,892 1,769 $13,769
600H415 GP Bucket - 4.6 cu. yd. w/ Teeth & Segmented Cutting Edge 3,892 1,769 $17,239
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 457 ZX USA Price Page
TM 320JCB ARTICULATED TELESCOPIC HANDLER
TIER 4i
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
ECCECTIVE July 1st 2013
TM 320 - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA1st July 2013
STANDARD EQUIPMENT
GENERAL
ENGINE
TRANSMISSION
AXLES
BRAKES
ELECTRICAL
INSTRUMENTS
CAB UNIT
TIRES Michelin 460/70 R24 XMCL Agricultural Traction Floatation Radials
TELESCOPIC BOOM
CARRIAGE
HYDRAULICS
Two piece unitized mainframe with rigid frame and componentized driveline.
Heavy duty axles with outboard planetary drive. Front axle with optional limited slip differential and rear axle with
torque proportioning differential
12 volt, Meets IP67 water ingress test standard, 85 amp alternator, 780 CCA, 92 AH low maintenance battery.
Two section, 17ft 1in lift height with hydraulic parallel lift, 6390 lbs maximum lift capacity. With hydraulic boom
suspension
48" wide, "Q-Fit" for easy attachment changes, includes 2" fork shaft.
Meets SAE J231 FOPS/SAE J1040 ROPS requirements, air suspension seat with seat belt, tilt steering column, air
conditioning and heater with defroster vent system, windshield wipers and washers for front/rear and roof glass, rear
view mirror, front worklights, horn, in cab storage, backup alarm meets SAE J994, operators manual
Cab Mounted Single lever Servo joystick with "loader" pattern control and proportional boom extend and auxiliary
functions, Piston Pump load sensing system with 37 GPM, single auxiliary hydraulic service.
TIER 4i JCB EcoMAX turbo intercooled, 125 hp. Dual element air cleaner, spin-on fuel filter, fuel/water separator,
thermo start assist, anti-freeze protection to -35 deg F, reverse drive cooling fan.
Audible and visual warning system, tachometer, hourmeter, fuel gauge, coolant temp gauge, warning lights for battery
charge, air cleaner restriction, engine oil pressure, engine coolant temp, trans oil pressure, parking brake, lift-extend
and tilt on single lever control.
Internal mounted inboard on front axle, multi disc, oil immersed, servo assisted hydraulic actuation, self adjusting,
independent disc type parking brake with brake on alarm and transmission disconnect.
JCB 6 speed autoshift transmission, Powershift direction change, 25 mph travel speed, 12 inch torque converter,
transmission disconnect on foot brake.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - ATTACHMENTS - NEW FACTORY BUILT ORDERSSection 4 - OPTIONS - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 2 of 6 TM 320 USD
TM 320 - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SALES PACKAGE BUILD CODE: 6270ACODE ITEM CAB
6270 12467 87059 √
406A128 Michelin 460/70 R24 XMCL Agricultural Traction Radials 600 5407 √
406B122 2000 8367 √
406C111 Heater and air conditioning 50 2591 √406D182 Axles - limited slip differential in the front axle and torque proportioning in the rear 2000 8790 √406E131 4 spool valve proportional block with servo Joystick and Smooth ride boom suspension 150 4942 √406F192 Operators manual - American English Language 1 0 √406G114 JCB Q-Fit carriage with fork shaft and hydraulic disconnect 150 2376 √406N154 Rear work lights 2 additional 5 258 √406N155 Front work lights 2 additional 5 258 √406N156 Boom work lights 5 309 √406P145 Engine block heater 5 232 √406R182 Exterior mirrors - deluxe 5 283 √406R202 Sliding door glass 2 567 √406R204 Air suspension seat 150 1133 √406R209 Aux circuit pressure release 5 515 √
Shipping Weight - Lbs. 17,600
Shipping Weight - Kgs. 8,000
SUGGESTED LIST PRICE $123,087
SECTION 1 - PACKAGE BUILD
TM320 articulated telescopic handler, 6390lb maximum lift capacity, Tier 4i JCB EcoMAX 125hp turbo
intercooled engine, 4 wheel drive and 6 speed transmission
1st July 2013
Cab - deluxe trim, mechanical suspension seat, full instrumentation and adjustable steer column
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 3. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 TM 320 USD
TM 320 - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
6270 12,467 5,667 87,059$
TIRES (E)
406A128 600 273 5,407$
406A129 673 306 8,652$
406A140 702 319 9,785$
OPERATOR'S AREA (E)
406B122 2,000 909 8,367$
CAB CONDITIONING (E)406C111 Heater and air conditioning 50 23 2,591$
AXLE AND DIFFERENTIAL (E)
406D180 Axles - torque proportioning in the front and rear 1,950 886 8,171$
406D182 Axles - limited slip differential in the front axle and torque proportioning in the rear 2,000 909 8,790$
AUXILIARY HYDRAULICS (E)406E131 4 spool valve proportional block with servo Joystick and Smooth ride boom suspension 150 68 4,942$
OPERATORS MANUAL (E)406F192 Operators manual - American English Language 1 0 -$
CARRIAGE (E)406G114 JCB Q-Fit carriage with fork shaft and hydraulic disconnect 150 68 2,376$
1st July 2013
WEIGHT
Cab - deluxe trim, mechanical suspension seat, full instrumentation and adjustable steer column
TM320 articulated telescopic handler, 6390lb maximum lift capacity, Tier 4i JCB EcoMAX 125hp
turbo intercooled engine, 4 wheel drive and 6 speed transmission
Michelin 460/70 R24 XMCL Agricultural Traction Radials
Michelin 500/70 R24 XMCL Agricultural Traction Floatation Radials
Michelin 15.5 R25 Industrial Traction L2 radials
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Attachments and/or Options from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 6 TM 320 USD
TM 320 - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATOR'S COMPARTMENT OPTIONS
406R182 Exterior mirrors - deluxe 5 2 283$
406R183 Screen guard - front 20 9 824$
406R184 Screen guard - top 20 9 824$
406R202 Sliding door glass 2 1 567$
406R204 Air suspension seat 150 68 1,133$
ELECTRICAL OPTIONS
406N154 Rear work lights 2 additional 5 2 258$
406N155 Front work lights 2 additional 5 2 258$
406N156 Boom work lights 5 2 309$
406P145 Engine block heater 5 2 232$
HYDRAULIC OPTIONS
406R209 Aux circuit pressure release 5 2 515$
406R213 2nd boom auxiliary circuit 10 5 592$
406S146 Rear Hydraulic trailer hitch with rear aux. hydraulics, mirror and trailer brakes 100 45 4,600$
1st July 2013
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 TM 320 USD
TM 320 - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
ATTACHMENTS
406H150 Bucket - 1.4 cu yard with bolt on cutting edge 1350 614 3,813$
406L130 1.75 cu. yd, 96" wide GP bucket with edge 1005 457 3,813$
406P105 2.25 cu. yd, 96" wide light material bucket 905 411 3,850$
406L804 2.5 cu. yd, 96" wide light material bucket 1310 595 4,818$
406L817 4.0 cu. yd. Light Material Bucket (Q-Fit Mount) 1725 784 7,527$
406L821 3.0 cu. yd. Bucket - 96" WIDE 1700 773 4,926$
406L823 3.25 cu. yd. Bucket - 102" Wide 1875 852 5,805$
406L824 Cutting Edge - 102" Wide (3-piece) 185 84 694$
FORK SETS
406H132 48" pallet forks - for Q-Fit carriage 550 250 1,335$
406H162 ITA forks 48" and frame, for Q-Fit carriage 1250 568 2,391$
OTHER ATTACHMENTS
406Q806 Q-Fit blank 100 45 709$
1st July 2013
All Q-Fit mount attachments from the Agri range of loadalls (except 550-80) will fit the TM320 and may be ordered from parts using the part numbers listed in
the dealer fit section
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 TM 320 USD
SKID STEER ANDCOMPACT TRACK LOADER
JCB SKID STEER LOADER
135NEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR.
EFFECTIVE: October 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 1, 2013
STANDARD EQUIPMENT
Engine
Transmission
Tires: Front & Rear
Brakes
Electrical
Instruments
Cab or Canopy
Hydraulics
Loader
Serviceability
JCB 135 SKID STEER LOADER
Rated Operating Capacity of 1350 lbs, Radial Lift Loader Design provides for
maximum loader lift breakout force for superior digging performance.
Auxiliary circuit is standard for operation of hydraulic powered attachments.
Choice of Standard Mechanical or Optional Powered Quick Hitch. Hydraulic
float standard on all models. Loader options include: Parallel Lift in raise only.
Machine braking provided through the hydrostatic transmission. Parking
brake consists of multiple disc, oil immersed, spring applied hydraulic release
that provides a fail safe with engine off. Electrically activated through a
switch on the instrument panel or by raising seat bar.
Servo Controls with hydrostatic transmission. Optional Creep Speed
provides operation from 0 to 1/2 of full speed for special applications.
10 x 16.5 8 ply, Heavy Duty JCB Tires providing 59.8" width.
1.9L (113.5CID) 48 SAE Gross hp, Kohler KDI 1903 TCR engine,
centrifugal dry type dual stage air cleaner. Fuel filter with water separator;
1000 CCA battery; variable speed hydraulically driven fan.
Cab tilts forward to provide further access to the hydraulic components. Rear
door provides class leading access to engine bay and daily maintenance and
check points.
Meets IP69 water ingress standard. Worklights, 2 Front and 1 Rear, Reverse
Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument
panels. Standard electronic throttle control with optional foot throttle.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with retractable
seatbelt and operator restraint interlock for drive and loader functions. Cab
units are pressurized and available with heat, sliding left window, and full side
door. Right Hand glass as standard on canopy and cab builds.
18.5gpm @ 3335psi standard flow.
All prices and specifications subject to change without notice Page 2 of 10 JCB 135 Skid Steer USD Price Page
JCB 135 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8600A 8600BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8600 JCB 135 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width)
881B204
881B224
881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881G305 Block Heater - 110V Kohler Engine
881G201 Foot Throttle (for JCB Servo Controls)
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155,150T)
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods
SUGGESTED LIST PRICE $34,037 $37,774
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm
Float and Mechanical Quickhitch. - 3 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 3 CYL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 135 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8600 JCB 135 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader $29,954
TIRE SETS (E) pick one
881A201 10 x 16.5 8PR HD Tires & Wheels (provides 59.8" width) $0
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width) $46
881A205 10x 16.5 10PR Lifemaster Industrial Pneumatic Tires & Wheels (provides 59.8" width) $721
881A206 10x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Tire & Wheels (provides 63" width) $747
881A207 31.5/13 x 16.5 8PR SK Hauler High Floatation Tires & Wheels (provides 64.7" width) $901
881A208 7x 15 Solid Industrial Tires and Wheels (provides 54.3" width) $1,442
881A209 10 x 16.5 Brawler Solid Flex Industrial Tires & Wheels (provides 59.8" width) $1,803
881A213 7 x 15 14PR Pneumatic Tires and Wheels (provides 53.9" width) $824
881A216 33 x 6 x 10 Slick Brawler Solid Flex Industrial $1,937
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B203 $642
881B204 $709
Cab with Heater Packages
881B213 $2,561
881B214 $2,627
MACHINE CONTROLS (E)
881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics $1,061
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 3 CYL
JCB 135 SKID STEER LOADER EFFECTIVE: October 1, 2013
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual Pattern
Control, Reversing Fan and Roadlights) - 3 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 3 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 3 CYL
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 135 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D346 GP Bucket - 54" - 12.5 cu-ft $863
881D347 GP Bucket - 60" - 12.7 cu-ft $947
881D301 GP Bucket - 66" - 14.1 cu-ft $962
Landscape Buckets
881D348 Landscape Bucket - 54" - 14.2 cu-ft $825
881D349 Landscape Bucket - 60" - 15.8 cu-ft $925
881D305 Landscape Bucket - 66" - 17.5 cu-ft $959
6 in 1 Buckets
881D365 6 In 1 Multipurpose Bucket - 60" - 12.2cu-ft $3,420
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft $3,501
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 135 SKID STEER LOADER EFFECTIVE: October 1, 2013
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 135 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E)
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G213 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $889
881G305 Block Heater - 110V Kohler Engine $134
881G231 Rotating Beacon and Socket $140
881G254 Worklights with 2 rear lights for non A/C machines $134
881G295 ISO & Dual Hand Control Pattern $558
881G301 Creep Speed $125
881G304 White Noise Reverse Alarm $189
881G282 Powered Quick Hitch $782
Loader Options
881G313 Parallel Lift (Raise Only) - 135 $494
Hydraulic Options
881G221 Biodegradable Oils $303
Operators Compartment Options
881G201 Foot Throttle (for JCB Servo Controls) $196
881G205 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G211 Key Start/ Key Immobilizer- All machine configurations $402
881G217 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G238 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G208 Impact Protection - Laminated Glass - for Canopy builds $536
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $857
881G303 Laminate Glass to replace tempered as standard on cab builds $123
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $673
881G279 Vinyl Mechanical Suspension Seat $240
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $616
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $696
881G220 3 inch wide Seatbelt $59
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $268
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $178
881G222 Radio with Speakers, Aerial and MP3 cable $300
881G236 $670
881G310 Additional Soundproofing (for special applications) $438
881G258 Right Hand Mesh to Replace Glass as Standard $187
881G212 Hardide Pivot Pins (For Severe Heavy Duty Applications) $694
881G296 Spark Arrestor Muffler - 3 CYL $231
881G229 Twine Cutter - Wheeled Machines Only $134
Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the
full left side door
U.S. DOLLAR
PRICE PAGES JCB 135 SKID STEER LOADER EFFECTIVE: October 1, 2013
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 135 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED ( - do not need to order if included in operator enclosure packages)
881G287 Reversing Fan $840
881G288 Tool Kit, Basic $322
881G289 Tool Kit, Full $478
881G290 Canopy Wheeled Fender - LH $119
881G291 Cab Wheeled Fender - LH $119
881G294 External Anolog Engine Hourmeter $135
881G308 Pre-cleaner T4 $465
APPLICATION PACKAGES
881G214 $2,009
881G215 $3,348
881G216 $3,014
881G251 $2,281
881G252 $996
881G261 $1,906
881G262 $3,240
881G263 $2,903
881G264 $2,785
881G265 $4,178
881G266 $3,851
881G267 $1,106
881G307 $514
BUCKET ACCESSORIES
881H319 Bolt on Edge for 54" bucket (1372mm) $254
881H320 Bolt on Edge for 60" bucket (1524mm) $273
881H301 Bolt on Edge for 66" Bucket (1676mm) $293
881H321 Tooth Bar for 54" bucket - Over bucket (1372mm) $581
881H322 Tooth Bar for 60" bucket - Over bucket (1524mm) $609
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $619
881H323 Tooth Bar for 54" bucket - Over bolt on edge (1372mm) $581
881H324 Tooth Bar for 60" bucket - Over bolt on edge (1524mm) $609
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $619
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines
Only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen,
Heavy Duty Rear Bars - Cab Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines
Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy
Machines Only
Heavy Duty Rear Bars Protective Bars for Adverse Applications, as a stand alone option
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen,
Heavy Duty Rear Bars - Canopy Machines Only
A/C FOPS Guard
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy
machines must order G208
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand
Steel Mesh to provide protection over laminated cab glass (Not for Canopy Builds)
Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection
Packages have been ordered
JCB 135 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard,
Heavy Duty Rear Bars - Canopy machines must order G208
EFFECTIVE: October 1, 2013
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy
machines must order G208
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy
Machines Only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 135 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Snow Removal Attachments
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,474
881U533 60" Snow Blade - Manual Angle 333/L8499 $1,666
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,020
881U535 60" Snow Blower - Standard Flow 333/L6154 $6,327
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $3,749
881U210 66" Heavy Duty Brush Grapple 333/L5022 $3,874
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $2,668
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $3,397
Hydraulic Brooms/Sweepers
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $4,997
881U302 Hydraulic angle kit for Angle Broom 332/L3983 $1,358
Hammers
881U354 HM266Q (includes Chisel & Moil) - *881U355 Mounting Bracket required* 980/A7456 $12,278
881U355 Mounting Bracket - Required for HM266Q Hammer 980/28400 $964
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,430
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: October 1, 2013 JCB 135 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
All prices and specifications subject to change without notice Page 8 of 10 JCB 135 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $970
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $7,923
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $8,335
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $4,391
EFFECTIVE: October 1, 2013 JCB 135 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
All prices and specifications subject to change without notice Page 9 of 10 JCB 135 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,424
881U531 66" Manure Forks with Top Grapple 333/L6106 $2,725
881U532 Bale Spear 333/L5627 $821
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,900
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
EFFECTIVE: October 1, 2013 JCB 135 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
All prices and specifications subject to change without notice Page 10 of 10 JCB 135 Skid Steer USD Price Page
JCB COMPACT TRACK LOADER
150TNEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR.
EFFECTIVE: OCTOBER 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
Engine
Transmission
Rubber Tracks:
Brakes
Electrical
Instruments
Cab or Canopy
Hydraulics
Loader
Serviceability
18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.
Fitted with 12.6" (320mm) wide tracks provide a machine with of 66" and a
ground bearing pressure of 6.75 psi.
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 5.6
mph in both forward and reverse. Optional Creep Speed provides operation
from 0 to 50% of full speed for special applications. An optional two (2)
speed transmission is available providing a low range of 0 - 5.6 mph and a
high range of 0 - 7.8 mph.
EFFECTIVE: OCTOBER 1,
2013
Machine braking provided through the hydrostatic transmission. Parking
brake consists of multiple disc, oil immersed, spring applied hydraulic
release that provides a fail safe with engine off. Electrically activated
through a switch on the instrument panel or by raising seat bar.
JCB 150T COMPACT TRACK LOADER
Rated Operating Capacity of 1500 lbs, Radial Lift Loader Design provides
for maximum loader lift breakout force for superior digging performance.
Auxiliary circuit is standard for operation of hydraulic powered attachments.
Choice of Standard Mechanical or Optional Powered Quick Hitch.
Hydraulic float standard on all models. Loader options include: Parallel Lift
in raise only and SRS (smooth ride system).
Cab tilts forward to provide further access to the hydraulic components.
Rear door provides class leading access to engine bay and daily
maintenacne and check points.
1.9L (113.5CID) 56 SAE Gross hp, Kohler KDI 1903 TCR engine,
centrifugal dry type dual stage air cleaner. Fuel filter with water separator;
1000 CCA battery; variable speed hydraulically driven fan.
Meets IP69 water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument
panels. Standard electronic throttle control with optional foot throttle.
SAE certified ROPS/FOPS, left side entry. Mechancial vinyl suspension
seat with retractable seatbelt and operator restraint interlock for drive and
loader functions. Cab units are pressurized and available with heat or heat
and A/C, sliding left window, and full side door. Right Hand glass as
standard on canopy and cab builds.
All prices and specifications subject to change without notice Page 2 of 10 JCB 150T Compact Tracked USD Price Page
JCB 150T SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8610A 8610BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8610 JCB 150T Tier 4 Tracked, Radial Lift, New Generation, Compact Tracked Loader
881A221 320 mm Wide Rubber Track Set - 3 Roller (provides 66" width)
881B234
881B254
881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F208
881G305 Block Heater - 110V Kohler Engine
881G201 Foot Throttle (for JCB Servo Controls)
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155,150T)
881G281 2 Speed - Tracked
881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift)
SUGGESTED LIST PRICE $44,738 $52,615
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm
Float and Mechanical Quickhitch. - 3 CYL
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function
Joystick Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 3 CYL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 150T Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8610 JCB 150T Tier 4 Tracked, Radial Lift, New Generation, Compact Tracked Loader $41,342
TRACKS (E)
881A221 320 mm Wide Rubber Track Set - 3 Roller (provides 66" width) $0
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B233 $618
881B234 $684
Cab with Heater Packages
881B243 $2,495
881B244 $2,561
Cab with Heater and A/C Packages
881B253 $4,246
881B254 $4,312
MACHINE CONTROLS (E)
881C202 $1,061
881C205 $1,618
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 3 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 3 CYL
JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
U.S. DOLLAR PRICE
PAGES JCB 150T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch.
(Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual Pattern Control,
Reversing Fan and Roadlights) - 3 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 3 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 3 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch.
- 3 CYL
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 150T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D301 GP Bucket - 66" - 14.1 cu-ft $962
881D340 GP Bucket - 68" - 14.3 cu-ft $1,004
881D302 GP Bucket - 72" - 15.4 cu-ft $1,043
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,593
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,622
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,674
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,620
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,649
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,702
Landscape Buckets
881D305 Landscape Bucket - 66" - 17.5 cu-ft $959
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,056
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,590
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,687
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,616
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,714
6 in 1 Buckets
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft $3,501
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft $3,771
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,132
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,402
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,159
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,429
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 150T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 150T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F208 $1,052
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G210 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $881
881G213 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $889
881G305 Block Heater - 110V Kohler Engine $134
881G231 Rotating Beacon and Socket $140
881G254 Worklights with 2 rear lights for non A/C machines $134
881G295 ISO & Dual Hand Control Pattern $558
881G301 Creep Speed $125
881G304 White Noise Reverse Alarm $189
881G282 Powered Quick Hitch $782
Loader Options
881G285 SRS, Smooth Ride System - Radial $1,005
881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift) $1,005
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155,150T) $494
881G312 Parallel Lift (Raise Only) - Radial Lift - High Flow (155,150T) $494
Hydraulic Options
881G281 2 Speed - Tracked $1,502
881G221 Biodegradable Oils $303
Operators Compartment Options
881G201 Foot Throttle (for JCB Servo Controls) $196
881G205 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G211 Key Start/ Key Immobilizer- All machine configurations $402
881G217 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G238 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G208 Impact Protection - Laminated Glass - for Canopy builds $536
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $857
881G303 Laminate Glass to replace tempered as standard on cab builds $123
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $673
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $616
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $696
881G220 3 inch wide Seatbelt $59
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $268
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $178
881G222 Radio with Speakers, Aerial and MP3 cable $300
881G237 $569
881G310 $438
881G258 $187
881G212 $694
881G296 $231
Right Hand Mesh to Replace Glass as Standard
Hardide Pivot Pins (For Severe Heavy Duty Applications)
Spark Arrestor Muffler - 3 CYL
Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the
full left side door
U.S. DOLLAR
PRICE PAGES JCB 150T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option)
Additional Soundproofing (for special applications)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 150T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
881G288 Tool Kit, Basic $322
881G289 Tool Kit, Full $478
881G287 Reversing Fan $840
881G290 Canopy Wheeled Fender - LH $119
881G291 Cab Wheeled Fender - LH $119
881G294 External Anolog Engine Hourmeter $135
881G308 Pre-cleaner T4 $465
APPLICATION PACKAGES
881G214 $2,009
881G215 $3,348
881G216 $3,014
881G251 $2,281
881G252 $996
881G261 $1,906
881G262 $3,240
881G263 $2,903
881G264 $2,785
881G265 $4,178
881G266 $3,851
881G267 $1,106
881G307 $514
BUCKET ACCESSORIES
881H301 Bolt on Edge for 66" Bucket (1676mm) $293
881H325 Bolt on Edge for 68" bucket (1727mm) $303
881H302 Bolt on Edge for 72" Bucket (1727mm) $312
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $619
881H326 Tooth Bar for 68" bucket - Over bucket (1727mm) $637
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $653
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $619
881H327 Tooth Bar for 68" bucket - Over bolt on edge (1727mm) $637
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $653
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
JCB 150T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: October 1, 2013
Heavy Duty Rear Bars Protective Bars for Adverse Applications, as a stand alone option
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order
G208
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars -
Canopy machines must order G208
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order
G208
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass (Not for Canopy Builds)
Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated
cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been ordered
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Cab Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines Only
A/C FOPS Guard
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Canopy Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 150T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket - 21 cu. ft. Capacity 332/L1829 $1,376
Snow Buckets
881U533 60" Snow Blade - Manual Angle 333/L8499 $1,666
881U650 72" Snow Blade - Manual Angle 332/X4347 $1,817
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,020
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,363
881U535 60" Snow Blower - Standard Flow 333/L6154 $6,327
881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U670 72" Snow Push 333/L5629 $3,054
Grapple Attachments
881U210 66" Heavy Duty Brush Grapple 333/L5022 $3,874
881U200 72" Heavy Duty Brush Grapple 332/L4030 $3,999
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $3,397
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $4,126
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $723
Hydraulic Brooms/Sweepers
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $4,997
881U302 Hydraulic angle kit for Angle Broom 332/L3983 $1,358
Hammers
881U354 HM266Q (includes Chisel & Moil) - *881U355 Mounting Bracket required* 980/A7456 $12,278
881U355 Mounting Bracket - Required for HM266Q Hammer 980/28400 $964
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,430
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: October 1, 2013 JCB 150T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F208
All prices and specifications subject to change without notice Page 8 of 10 JCB 150T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $970
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $4,391
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $9,032
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $9,485
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,725
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,551
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,018
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $10,825
EFFECTIVE: October 1, 2013 JCB 150T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F208
All prices and specifications subject to change without notice Page 9 of 10 JCB 150T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U531 66" Manure Forks with Top Grapple 333/L6106 $2,725
881U550 72" Manure Forks with Top Grapple 332/L3869 $3,028
881U532 Bale Spear 333/L5627 $821
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,900
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $17,409
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $17,712
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
EFFECTIVE: October 1, 2013 JCB 150T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F208
All prices and specifications subject to change without notice Page 10 of 10 JCB 150T Compact Tracked USD Price Page
JCB SKID STEER LOADER
155NEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR.
EFFECTIVE: OCTOBER 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: OCTOBER 1,
2013
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TIRES: Front & Rear
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
JCB 155 SKID STEER LOADER
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2
Front and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.
Cab tilts forward to provide further access to the hydraulic components.
Rear door provides class leading access to engine bay and daily
maintenance check points.
Rated Operating Capacity of 1550 lbs, Radial Lift Loader Design provides for
maximum loader lift breakout force for superior digging performance.
Auxiliary circuit is standard for operation of hydraulic powered attachments.
Choice of Standard Mechanical or Optional Powered Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise
only and SRS (smooth ride system).
18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.
Machine braking provided through the hydrostatic transmission. Parking
brake consists of multiple disc, oil immersed, spring applied hydraulic release
that provides a fail safe with the engine off. Electrically activated through a
switch on the instrument panel or by raising seat bar.
Audible and visual warning systems, right and left side mounted instrument
panels. Standard electronic throttle control with optional foot throttle.
1.9L (113.5CID) 56 SAE Gross hp, Kohler KDI 1903 TCR engine,
centrifugal dry type dual stage air cleaner. Fuel filter with water separator;
1000 CCA battery; variable speed hydraulically driven fan.
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 7.5
mph in both forward and reverse. Optional Creep speed provides operation
from 0 - 1/2 of full speed for special applications. An optional two speed
transmission is available providing a low range of 0 - 7.5 mph and a high
range of 0 - 11.5 mph
10 x 16.5 8 ply, Heavy Duty WIDE TRACK JCB Tires providing 63" width.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and
operator restraint interlock for drive and loader functions. Cab units are
pressurized and available with heat or heat and A/C, sliding left window and
full side door. Right Hand glass as standard on canopy and cab builds.
All prices and specifications subject to change without notice Page 2 of 10 JCB 155 Skid Steer USD Price Page
JCB 155 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8601A 8601BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8601 JCB 155 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width)
881B204
881B224
881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F208
881G305 Block Heater - 110V Kohler Engine
881G201 Foot Throttle (for JCB Servo Controls)
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155,150T)
881G280 2 Speed Motors - Wheeled
881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift)
SUGGESTED LIST PRICE $35,182 $43,035
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm
Float and Mechanical Quickhitch. - 3 CYL
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function
Joystick Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 3 CYL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8601 JCB 155 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader $31,099
TIRE SETS (E) pick one
881A201 10 x 16.5 8PR HD Tires & Wheels (provides 59.8" width) $0
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width) $46
881A205 10x 16.5 10PR Lifemaster Industrial Pneumatic Tires & Wheels (provides 59.8" width) $721
881A206 10x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Tire & Wheels (provides 63" width) $747
881A207 31.5/13 x 16.5 8PR SK Hauler High Floatation Tires & Wheels (provides 64.7" width) $901
881A208 7x 15 Solid Industrial Tires and Wheels (provides 54.3" width) $1,442
881A209 10 x 16.5 Brawler Solid Flex Industrial Tires & Wheels (provides 59.8" width) $1,803
881A213 7 x 15 14PR Pneumatic Tires and Wheels (provides 53.9" width) $824
881A216 33 x 6 x 10 Slick Brawler Solid Flex Industrial $1,937
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B203 $642
881B204 $709
Cab with Heater Packages
881B213 $2,561
881B214 $2,627
Cab with Heater and A/C Packages
881B223 $4,246
881B224 $4,312
MACHINE CONTROLS (E)
881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics $1,061
881C205 $1,618
JCB 155 SKID STEER LOADER EFFECTIVE: October 1, 2013
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual Pattern
Control, Reversing Fan and Roadlights) - 3 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 3 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 3 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 3 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 3 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 3 CYL
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D346 GP Bucket - 54" - 12.5 cu-ft $863
881D347 GP Bucket - 60" - 12.7 cu-ft $947
881D301 GP Bucket - 66" - 14.1 cu-ft $962
881D340 GP Bucket - 68" - 14.3 cu-ft $1,004
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,593
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,622
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,620
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,649
Landscape Buckets
881D348 Landscape Bucket - 54" - 14.2 cu-ft $825
881D349 Landscape Bucket - 60" - 15.8 cu-ft $925
881D305 Landscape Bucket - 66" - 17.5 cu-ft $959
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,590
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,616
6 in 1 Buckets
881D365 6 In 1 Multipurpose Bucket - 60" - 12.2cu-ft $3,420
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft $3,501
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,132
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,159
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 155 SKID STEER LOADER EFFECTIVE: October 1, 2013
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F208 $1,052
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G210 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $881
881G213 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $889
881G305 Block Heater - 110V Kohler Engine $134
881G231 Rotating Beacon and Socket $140
881G254 Worklights with 2 rear lights for non A/C machines $134
881G295 ISO & Dual Hand Control Pattern $558
881G301 Creep Speed $125
881G304 White Noise Reverse Alarm $189
881G282 Powered Quick Hitch $782
Loader Options
881G285 SRS, Smooth Ride System - Radial $1,005
881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift) $1,005
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155,150T) $494
881G312 Parallel Lift (Raise Only) - Radial Lift - High Flow (155,150T) $494
Hydraulic Options
881G280 2 Speed Motors - Wheeled $1,502
881G221 Biodegradable Oils $303
Operators Compartment Options
881G201 Foot Throttle (for JCB Servo Controls) $196
881G205 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G211 Key Start/ Key Immobilizer- All machine configurations $402
881G217 $402
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G238 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G208 Impact Protection - Laminated Glass - for Canopy builds $536
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $857
881G303 Laminate Glass to replace tempered as standard on cab builds $123
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $673
881G279 Vinyl Mechanical Suspension Seat $240
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $616
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $696
881G220 3 inch wide Seatbelt $59
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $268
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $178
881G222 Radio with Speakers, Aerial and MP3 cable $300
881G236 $670
881G310 Additional Soundproofing (for special applications) $438
881G258 Right Hand Mesh to Replace Glass as Standard $187
881G212 Hardide Pivot Pins (For Severe Heavy Duty Applications) $694
881G296 Spark Arrestor Muffler - 3 CYL $231
881G229 Twine Cutter - Wheeled Machines Only $134
Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when
getting the full left side door
Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights)
U.S. DOLLAR
PRICE PAGES JCB 155 SKID STEER LOADER EFFECTIVE: October 1, 2013
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
881G288 Tool Kit, Basic $322
881G289 Tool Kit, Full $478
881G287 Reversing Fan $840
881G290 Canopy Wheeled Fender - LH $119
881G291 Cab Wheeled Fender - LH $119
881G294 External Anolog Engine Hourmeter $135
881G308 Pre-cleaner T4 $465
APPLICATION PACKAGES
881G214 $2,009
881G215 $3,348
881G216 $3,014
881G251 $2,281
881G252 $996
881G261 $1,906
881G262 $3,240
881G263 $2,903
881G264 $2,785
881G265 $4,178
881G266 $3,851
881G267 $1,106
881G307 $514
BUCKET ACCESSORIES
881H319 Bolt on Edge for 54" bucket (1372mm) $254
881H320 Bolt on Edge for 60" bucket (1524mm) $273
881H301 Bolt on Edge for 66" Bucket (1676mm) $293
881H325 Bolt on Edge for 68" bucket (1727mm) $303
881H321 Tooth Bar for 54" bucket - Over bucket (1372mm) $581
881H322 Tooth Bar for 60" bucket - Over bucket (1524mm) $609
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $619
881H326 Tooth Bar for 68" bucket - Over bucket (1727mm) $637
881H323 Tooth Bar for 54" bucket - Over bolt on edge (1372mm) $581
881H324 Tooth Bar for 60" bucket - Over bolt on edge (1524mm) $609
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $619
881H327 Tooth Bar for 68" bucket - Over bolt on edge (1727mm) $637
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
A/C FOPS Guard
Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection
over laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been
ordered
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty
Rear Bars - Cab Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines
Only
Heavy Duty Rear Bars Protective Bars for Adverse Applications, as a stand alone option
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty
Rear Bars - Canopy Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines
Only
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel
Mesh to provide protection over laminated cab glass (Not for Canopy Builds)
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty
Rear Bars - Canopy machines must order G208
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines
must order G208
JCB 155 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines
must order G208
EFFECTIVE: October 1, 2013
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Snow Removal Attachments
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,474
881U533 60" Snow Blade - Manual Angle 333/L8499 $1,666
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,020
881U535 60" Snow Blower - Standard Flow 333/L6154 $6,327
881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U670 72" Snow Push 333/L5629 $3,054
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $3,749
881U210 66" Heavy Duty Brush Grapple 333/L5022 $3,874
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $2,668
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $3,397
Hydraulic Brooms/Sweepers
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $4,997
881U302 Hydraulic angle kit for Angle Broom 332/L3983 $1,358
Hammers
881U354 HM266Q (includes Chisel & Moil) - *881U355 Mounting Bracket required* 980/A7456 $12,278
881U355 Mounting Bracket - Required for HM266Q Hammer 980/28400 $964
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,430
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: October 1, 2013 JCB 155 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated High Flow require Essential code 881F208
All prices and specifications subject to change without notice Page 8 of 10 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex $472
881U459 9" X 4' Heavy Duty Auger 2" Hex $636
881U460 12" X 4' Heavy Duty Auger 2" Hex $723
881U461 15" X 4' Heavy Duty Auger 2" Hex $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex $970
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" $168
881U471 Hex. Drive Extension - 18" $247
881U472 Hex. Drive Extension - 24" $328
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow $4,391
881U473 60" Landscape Power Rake with Manual Angle $7,923
881U474 60" Landscape Power Rake with Hydraulic Angle $8,335
333/L8191
333/L6180
333/L6126
980/L7273
980/L7251
980/L7257
980/L7267
980/L7270
980/L7271
980/L7272
JCB 155 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
EFFECTIVE: October 1, 2013
980/A2039
980/A2032
980/A3001
980/A2031
980/A2034
980/A2035
980/A2037
980/A2038
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F208
All prices and specifications subject to change without notice Page 9 of 10 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple $2,424
881U531 66" Manure Forks with Top Grapple $2,725
881U532 Bale Spear $821
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow $4,900
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow $5,152
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW $17,409
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW $17,712
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW $21,413
333/L8251
EFFECTIVE: October 1, 2013
332/X4299
332/X4300
332/L7272
332/L7251
332/X4294
332/X4295
332/X4382
JCB 155 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
333/L6079
333/L6106
333/L5627
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F208
All prices and specifications subject to change without notice Page 10 of 10 JCB 155 Skid Steer USD Price Page
JCB SKID STEER LOADER
175NEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR.
EFFECTIVE: OCTOBER 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
10 x 16.5 8 ply, Heavy Duty WIDE TRACK JCB Tires providing 63" width.
JCB 175 SKID STEER LOADER
LOADER Rated Operating Capacity of 1750 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of
hydraulic powered attachments. Choice of Standard Mechanical or Optional Powered Quick Hitch.
Hydraulic Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS
(smooth ride system).
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple
disc, oil immersed, spring applied hydraulic release that provides a fail safe with the engine off.
Electrically activated through a switch on the instrument panel or by raising seat bar.
18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.
Audible and visual warning systems, right and left side mounted instrument
panels. Standard electronic throttle control with optional foot throttle.
EFFECTIVE: OCTOBER 1, 2013
Cab tilts forward to provide further access to the hydraulic components. Rear
door provides class leading access to engine bay and daily maintenance and
check points.
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 7.5 mph in both forward and
reverse. Optional Creep speed provides operation from 0 to 1/2 of full speed for special applications.
An optional two (2) speed transmission is available providing a low range of 0 - 7.5 mph and a high
range of 0 - 11.5 mph.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and operator
restraint interlock for drive and loader functions. Cab units are pressurized and
available with heat or heat and A/C, sliding left window and full side door. Right
Hand glass as standard on canopy and cab builds.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
1.9L (113.5CID) 56 SAE Gross hp, Kohler KDI 1903 TCR engine, centrifugal dry type dual stage air
cleaner. Fuel filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.
All prices and specifications subject to change without notice Page 2 of 9 JCB 175 Skid Steer USD Price Page
JCB 175 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8602A 8602BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8602 JCB 175 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width)
881B204
881B224
881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F206
881G305 Block Heater - 110V Kohler Engine
881G201 Foot Throttle (for JCB Servo Controls)
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T)
881G280 2 Speed Motors - Wheeled
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift)
SUGGESTED LIST PRICE $36,736 $44,589
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm
Float and Mechanical Quickhitch. - 3 CYL
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function
Joystick Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 3 CYL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8602 JCB 175 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $32,653
TIRE SETS (E) pick one
881A201 10 x 16.5 8PR HD Tires & Wheels (provides 59.8" width) $0
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width) $46
881A205 10x 16.5 10PR Lifemaster Industrial Pneumatic Tires & Wheels (provides 59.8" width) $721
881A206 10x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Tire & Wheels (provides 63" width) $747
881A207 31.5/13 x 16.5 8PR SK Hauler High Floatation Tires & Wheels (provides 64.7" width) $901
881A208 7x 15 Solid Industrial Tires and Wheels (provides 54.3" width) $1,442
881A209 10 x 16.5 Brawler Solid Flex Industrial Tires & Wheels (provides 59.8" width) $1,803
881A213 7 x 15 14PR Pneumatic Tires and Wheels (provides 53.9" width) $824
881A216 33 x 6 x 10 Slick Brawler Solid Flex Industrial $1,937
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B203 $642
881B204 $709
Cab with Heater Packages
881B213 $2,561
881B214 $2,627
Cab with Heater and A/C Packages
881B223 $4,246
881B224 $4,312
MACHINE CONTROLS (E)
881C202 $1,061
881C205 $1,618
JCB 175 SKID STEER LOADER EFFECTIVE: October 1, 2013
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual Pattern
Control, Reversing Fan and Roadlights) - 3 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 3 CYL
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 3 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 3 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 3 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 3 CYL
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 3 of 9 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D347 GP Bucket - 60" - 12.7 cu-ft $947
881D301 GP Bucket - 66" - 14.1 cu-ft $962
881D340 GP Bucket - 68" - 14.3 cu-ft $1,004
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,593
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,622
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,620
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,649
Landscape Buckets
881D349 Landscape Bucket - 60" - 15.8 cu-ft $925
881D305 Landscape Bucket - 66" - 17.5 cu-ft $959
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,590
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,616
6 in 1 Buckets
881D365 6 In 1 Multipurpose Bucket - 60" - 12.2cu-ft $3,420
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft $3,501
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,132
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,159
6 in 1 Buckets
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 175 SKID STEER LOADER EFFECTIVE: October 1, 2013
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 4 of 9 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F206 High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option) $1,052
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G210 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $881
881G213 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $889
881G305 Block Heater - 110V Kohler Engine $134
881G231 Rotating Beacon and Socket $140
881G254 Worklights with 2 rear lights for non A/C machines $134
881G295 ISO & Dual Hand Control Pattern $558
881G301 Creep Speed $125
881G304 White Noise Reverse Alarm $189
881G282 Powered Quick Hitch $782
Loader Options
881G283 SRS, Smooth Ride System - Vertical Lift $1,005
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift) $1,005
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T) $494
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 190, 205, 190T, 205T) $494
Hydraulic Options
881G280 2 Speed Motors - Wheeled $1,502
881G221 Biodegradable Oils $303
Operators Compartment Options
881G201 Foot Throttle (for JCB Servo Controls) $196
881G205 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G211 Key Start/ Key Immobilizer- All machine configurations $402
881G217 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G238 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G208 Impact Protection - Laminated Glass - for Canopy builds $536
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $857
881G303 Laminate Glass to replace tempered as standard on cab builds $123
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $673
881G279 Vinyl Mechanical Suspension Seat $240
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $616
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $696
881G220 3 inch wide Seatbelt $59
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $268
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $178
881G222 Radio with Speakers, Aerial and MP3 cable $300
881G236 $670
881G310 Additional Soundproofing (for special applications) $438
881G258 Right Hand Mesh to Replace Glass as Standard $187
881G212 Hardide Pivot Pins (For Severe Heavy Duty Applications) $694
881G296 Spark Arrestor Muffler - 3 CYL $231
881G229 Twine Cutter - Wheeled Machines Only $134
Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when
getting the full left side door
U.S. DOLLAR
PRICE PAGES JCB 175 SKID STEER LOADER EFFECTIVE: October 1, 2013
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 5 of 9 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
Other Options
881G288 Tool Kit, Basic $322
881G289 Tool Kit, Full $478
881G287 Reversing Fan $840
881G290 Canopy Wheeled Fender - LH $119
881G291 Cab Wheeled Fender - LH $119
881G294 External Anolog Engine Hourmeter $135
881G308 Pre-cleaner T4 $465
APPLICATION PACKAGES
881G214 $2,009
881G215 $3,348
881G216 $3,014
881G251 $2,281
881G252 $996
881G261 $1,906
881G262 $3,240
881G263 $2,903
881G264 $2,785
881G265 $4,178
881G266 $3,851
881G267 $1,106
881G307 $514
BUCKET ACCESSORIES
881H320 Bolt on Edge for 60" bucket (1524mm) $273
881H301 Bolt on Edge for 66" Bucket (1676mm) $293
881H325 Bolt on Edge for 68" bucket (1727mm) $303
881H322 Tooth Bar for 60" bucket - Over bucket (1524mm) $609
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $619
881H326 Tooth Bar for 68" bucket - Over bucket (1727mm) $637
881H324 Tooth Bar for 60" bucket - Over bolt on edge (1524mm) $609
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $619
881H327 Tooth Bar for 68" bucket - Over bolt on edge (1727mm) $637
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
A/C FOPS Guard
Heavy Duty Rear Bars Protective Bars for Adverse Applications, as a stand alone option
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear
Bars - Canopy Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only
JCB 175 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: October 1, 2013
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must
order G208
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear
Bars - Canopy machines must order G208
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must
order G208
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to
provide protection over laminated cab glass (Not for Canopy Builds)
Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been ordered
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear
Bars - Cab Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines Only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 9 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Snow Removal Attachments
881U533 60" Snow Blade - Manual Angle 333/L8499 $1,666
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,020
881U535 60" Snow Blower - Standard Flow 333/L6154 $6,327
881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U670 72" Snow Push 333/L5629 $3,054
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $3,749
881U210 66" Heavy Duty Brush Grapple 333/L5022 $3,874
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $2,668
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $3,397
Hydraulic Brooms/Sweepers
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $4,997
881U302 Hydraulic angle kit for Angle Broom 332/L3983 $1,358
Hammers
881U354 HM266Q (includes Chisel & Moil) - *881U355 Mounting Bracket required* 980/A7456 $12,278
881U355 Mounting Bracket - Required for HM266Q Hammer 980/28400 $964
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,430
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: October 1, 2013 JCB 175 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 7 of 9 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $970
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $4,391
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $7,923
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $8,335
EFFECTIVE: October 1, 2013 JCB 175 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 8 of 9 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,424
881U531 66" Manure Forks with Top Grapple 333/L6106 $2,725
881U532 Bale Spear 333/L5627 $821
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,900
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $17,409
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $17,712
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
EFFECTIVE: October 1, 2013 JCB 175 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 9 of 9 JCB 175 Skid Steer USD Price Page
JCB SKID STEER LOADER
190NEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR.
EFFECTIVE: OCTOBER 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
LOADER Rated Operating Capacity of 1900 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of
hydraulic powered attachments. Choice of Standard Mechanical or Optional Powered Quick
Hitch. Hydraulic Float standard on all models. Loader Options include: Parallel Lift in raise only
and SRS (smooth ride system).
Cab tilts forward to provide further access to the hydraulic components. Rear
door provides class leading access to engine bay and daily maintenance
check points.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front
and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.
Machine braking provided through the hydrostatic transmission. Parking brake consists of
multiple disc, oil immersed, spring applied hydraulic release that provides a fail safe with the
engine off. Electrically activated through a switch on the instrument panel or by raising seat
bar.
18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and
operator restraint interlock for drive and loader functions. Cab units are
pressurized and available with heat or heat and A/C, sliding left window and
full side door. Right Hand glass as standard on canopy and cab builds.
Audible and visual warning systems, right and left side mounted instrument
panels. Standard electronic throttle control with optional foot throttle.
10 x 16.5 8 ply, Heavy Duty WIDE TRACK JCB Tires providing 63" width.
JCB 190 SKID STEER LOADEREFFECTIVE: OCTOBER 1,
2013
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 7.5 mph in both forward
and reverse. Optional Creep speed provides operation from 0 - 1/2 of full speed for special
applications. An optional two speed transmission is available providing a low range of 0 - 7.5
mph and a high range of 0 - 11.5 mph.
2.5L (151.4CID) 62 SAE Gross hp, Kohler KDI 2504 TCR engine, centrifugal dry type dual
stage air cleaner. Fuel filter with water separator; 1000 CCA battery; variable speed
hydraulically driven fan.
All prices and specifications subject to change without notice Page 2 of 9 JCB 190 Skid Steer USD Price Page
JCB 190 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8603A 8603BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8603 JCB 190 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width)
881B206
881B226
881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F206
881G305 Block Heater - 110V Kohler Engine
881G201 Foot Throttle (for JCB Servo Controls)
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T)
881G280 2 Speed Motors - Wheeled
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift)
SUGGESTED LIST PRICE $40,145 $47,998
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm
Float and Mechanical Quickhitch. - 4 CYL
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function
Joystick Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 4 CYL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 190 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8603 JCB 190 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $36,062
TIRE SETS (E) pick one
881A201 10 x 16.5 8PR HD Tires & Wheels (provides 59.8" width) $0
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width) $46
881A205 10x 16.5 10PR Lifemaster Industrial Pneumatic Tires & Wheels (provides 59.8" width) $721
881A206 10x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Tire & Wheels (provides 63" width) $747
881A207 31.5/13 x 16.5 8PR SK Hauler High Floatation Tires & Wheels (provides 64.7" width) $901
881A208 7x 15 Solid Industrial Tires and Wheels (provides 54.3" width) $1,442
881A209 10 x 16.5 Brawler Solid Flex Industrial Tires & Wheels (provides 59.8" width) $1,803
881A213 7 x 15 14PR Pneumatic Tires and Wheels (provides 53.9" width) $824
881A216 33 x 6 x 10 Slick Brawler Solid Flex Industrial $1,937
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B205 $642
881B206 $709
Cab with Heater Packages
881B215 $2,561
881B216 $2,627
Cab with Heater and A/C Packages
881B225 $4,246
881B226 $4,312
MACHINE CONTROLS (E)
881C202 $1,061
881C205 $1,618
JCB 190 SKID STEER LOADER EFFECTIVE: October 1, 2013
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual Pattern
Control, Reversing Fan and Roadlights) - 4 CYL
Enclosed Cab, Heater w A/C, Wiper & Sliding LH Window (Cannot order options with this package - High
Flow, SRS, Powered Quickhitch, Dual Pattern Control, Reversing Fan and Roadlights) - 4 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 4 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 4 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 4 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 4 CYL
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 3 of 9 JCB 190 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D347 GP Bucket - 60" - 12.7 cu-ft $947
881D301 GP Bucket - 66" - 14.1 cu-ft $962
881D340 GP Bucket - 68" - 14.3 cu-ft $1,004
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,593
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,622
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,620
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,649
Landscape Buckets
881D349 Landscape Bucket - 60" - 15.8 cu-ft $925
881D305 Landscape Bucket - 66" - 17.5 cu-ft $959
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,590
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,616
6 in 1 Buckets
881D365 6 In 1 Multipurpose Bucket - 60" - 12.2cu-ft $3,420
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft $3,501
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,132
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,159
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 190 SKID STEER LOADER EFFECTIVE: October 1, 2013
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 4 of 9 JCB 190 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F206 High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option) $1,052
HYDRAULIC SYSTEMS (E) pick one
Electrical Options
881G210 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $881
881G213 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $889
881G305 Block Heater - 110V Kohler Engine $134
881G231 Rotating Beacon and Socket $140
881G254 Worklights with 2 rear lights for non A/C machines $134
881G295 ISO & Dual Hand Control Pattern $558
881G301 Creep Speed $125
881G304 White Noise Reverse Alarm $189
881G282 Powered Quick Hitch $782
Loader Options
881G283 SRS, Smooth Ride System - Vertical Lift $1,005
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift) $1,005
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T) $494
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 190, 205, 190T, 205T) $494
Hydraulic Options
881G280 2 Speed Motors - Wheeled $1,502
881G221 Biodegradable Oils $303
Operators Compartment Options
881G201 Foot Throttle (for JCB Servo Controls) $196
881G205 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G211 Key Start/ Key Immobilizer- All machine configurations $402
881G217 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G238 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G208 Impact Protection - Laminated Glass - for Canopy builds $536
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $857
881G303 Laminate Glass to replace tempered as standard on cab builds $123
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $673
881G279 Vinyl Mechanical Suspension Seat $240
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $616
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $696
881G220 3 inch wide Seatbelt $59
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $268
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $178
881G222 Radio with Speakers, Aerial and MP3 cable $300
881G236 $670
881G310 $438
881G258 $187
881G212 $694
881G297 $231
881G229 $134
Hardide Pivot Pins (For Severe Heavy Duty Applications)
Spark Arrestor Muffler - 4 CYL
Twine Cutter - Wheeled Machines Only
Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when
getting the full left side door
U.S. DOLLAR
PRICE PAGES JCB 190 SKID STEER LOADER EFFECTIVE: October 1, 2013
Additional Soundproofing (for special applications)
Right Hand Mesh to Replace Glass as Standard
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 5 of 9 JCB 190 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
881G240 Tool Kit- Basic $322
881G241 Tool Kit- Full $478
881G287 Reversing Fan $840
881G290 Canopy Wheeled Fender - LH $119
881G291 Cab Wheeled Fender - LH $119
881G294 External Anolog Engine Hourmeter $135
881G308 Pre-cleaner T4 $465
APPLICATION PACKAGES
881G214 $2,009
881G215 $3,348
881G216 $3,014
881G251 $2,281
881G252 $996
881G261 $1,906
881G262 $3,240
881G263 $2,903
881G264 $2,785
881G265 $4,178
881G266 $3,851
881G267 $1,106
881G307 $514
BUCKET ACCESSORIES
881H320 Bolt on Edge for 60" bucket (1524mm) $273
881H301 Bolt on Edge for 66" Bucket (1676mm) $293
881H325 Bolt on Edge for 68" bucket (1727mm) $303
881H322 Tooth Bar for 60" bucket - Over bucket (1524mm) $609
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $619
881H326 Tooth Bar for 68" bucket - Over bucket (1727mm) $637
881H324 Tooth Bar for 60" bucket - Over bolt on edge (1524mm) $609
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $619
881H327 Tooth Bar for 68" bucket - Over bolt on edge (1727mm) $637
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
JCB 190 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: October 1, 2013
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must
order G208
Heavy Duty Rear Bars Protective Bars for Adverse Applications, as a stand alone option
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty
Rear Bars - Canopy Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty
Rear Bars - Canopy machines must order G208
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must
order G208
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh
to provide protection over laminated cab glass (Not for Canopy Builds)
Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been ordered
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty
Rear Bars - Cab Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only
A/C FOPS Guard
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines Only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 9 JCB 190 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket - 21 cu. ft. Capacity 332/L1829 $1,376
Snow Buckets
881U533 60" Snow Blade - Manual Angle 333/L8499 $1,666
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,020
881U535 60" Snow Blower - Standard Flow 333/L6154 $6,327
881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U670 72" Snow Push 333/L5629 $3,054
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $3,749
881U210 66" Heavy Duty Brush Grapple 333/L5022 $3,874
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $2,668
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $3,397
Hydraulic Brooms/Sweepers
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $4,997
881U302 Hydraulic angle kit for Angle Broom 332/L3983 $1,358
Hammers
881U354 HM266Q (includes Chisel & Moil) - *881U355 Mounting Bracket required* 980/A7456 $12,278
881U355 Mounting Bracket - Required for HM266Q Hammer 980/28400 $964
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,430
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: October 1, 2013 JCB 190 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 7 of 8 JCB 190 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $970
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $4,391
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $7,923
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $8,335
EFFECTIVE: October 1, 2013 JCB 190 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 8 of 9 JCB 190 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,424
881U531 66" Manure Forks with Top Grapple 333/L6106 $2,725
881U532 Bale Spear 333/L5627 $821
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,900
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $17,409
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $17,712
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
EFFECTIVE: October 1, 2013 JCB 190 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 9 of 9 JCB 190 Skid Steer USD Price Page
JCB COMPACT TRACK LOADER
190TNEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR.
EFFECTIVE: OCTOBER 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
EFFECTIVE: OCTOBER 1,
2013 JCB 190T COMPACT TRACK LOADER
Machine braking provided through the hydrostatic transmission. Parking brake consists of
multiple disc, oil immersed, spring applied hydraulic release that provides a fail safe with the
engine off. Electrically activated through a switch on the instrument panel or by raising seat
bar.
2.5L (151.4CID) 62 SAE Gross hp, Kohler KDI 2504 TCR engine, centrifugal dry type dual
stage air cleaner. Fuel filter with water separator; 1000 CCA battery; variable speed
hydraulically driven fan.
18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides
access to engine bay and daily maintenance and check points.
Audible and visual warning systems, right and left side mounted instrument
panels. Standard electronic throttle control with optional foot throttle.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
Rated Operating Capacity of 1900 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of
hydraulic powered attachments. Choice of Standard Mechanical or Optional Powered Quick
Hitch. Hydraulic Float standard on all models. Loader Options include: Parallel Lift in raise only
and SRS (smooth ride system).
SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat
with seatbelt and operator restraint interlock for drive and loader functions.
Cab units are pressurized and available with heat or heat and A/C, sliding left
window and full side door. Right Hand glass as standard on canopy and cab
builds.
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 5.6 mph in both forward
and reverse. Optional Creep speed provides operation from 0 to 1/2 of full speed for special
applications. An optional two (2) speed transmission is available providing a low range of 0 -
5.6 mph and a high range of 0 - 7.8 mph
Fitted with 12.6" (320mm) wide tracks provide a machine with of 66" and a ground bearing
pressure of 6.2 psi.
All prices and specifications subject to change without notice Page 2 of 9 JCB 190T Compact Tracked USD Price Page
JCB 190T SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8611A 8611BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8611 JCB 190T Tier 4 Tracked, Vertical Lift, New Generation, Compact Tracked Loader
881A222 320 mm Wide Rubber Track Set - 4 Roller (provides 66" width)
881B236
881B256
881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F206
881G305 Block Heater - 110V Kohler Engine
881G201 Foot Throttle (for JCB Servo Controls)
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T)
881G281 2 Speed - Tracked
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift)
SUGGESTED LIST PRICE $48,875 $56,752
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm
Float and Mechanical Quickhitch. - 4 CYL
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function
Joystick Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 4 CYL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 190T Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8611 JCB 190T Tier 4 Tracked, Vertical Lift, New Generation, Compact Tracked Loader $45,479
TRACKS (E)
881A222 320 mm Wide Rubber Track Set - 4 Roller (provides 66" width) $0
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B235 $618
881B236 $684
Cab with Heater Packages
881B245 $2,495
881B246 $2,561
Cab with Heater and A/C Packages
881B255 $4,246
881B256 $4,312
MACHINE CONTROLS (E)
881C202 $1,061
881C205 $1,618
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 4 CYL
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
JCB 190T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 4 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual Pattern
Control, Reversing Fan and Roadlights) - 4 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 4 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 4 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 4 CYL
JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 3 of 9 JCB 190T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D301 GP Bucket - 66" - 14.1 cu-ft $962
881D340 GP Bucket - 68" - 14.3 cu-ft $1,004
881D302 GP Bucket - 72" - 15.4 cu-ft $1,043
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,593
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,622
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,674
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,620
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,649
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,702
Landscape Buckets
881D305 Landscape Bucket - 66" - 17.5 cu-ft $959
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,056
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,590
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,687
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,616
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,714
6 in 1 Buckets
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft $3,501
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft $3,771
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,132
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,402
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,159
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,429
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 190T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 4 of 9 JCB 190T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F206 High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option) $1,052
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G210 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $881
881G213 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $889
881G305 Block Heater - 110V Kohler Engine $134
881G231 Rotating Beacon and Socket $140
881G254 Worklights with 2 rear lights for non A/C machines $134
881G295 ISO & Dual Hand Control Pattern $558
881G301 Creep Speed $125
881G304 White Noise Reverse Alarm $189
881G282 Powered Quick Hitch $782
Loader Options
881G283 SRS, Smooth Ride System - Vertical Lift $1,005
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift) $1,005
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T) $494
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 190, 205, 190T, 205T) $494
Hydraulic Options
881G281 2 Speed - Tracked $1,502
881G221 Biodegradable Oils $303
Operators Compartment Options
881G201 Foot Throttle (for JCB Servo Controls) $196
881G205 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G211 Key Start/ Key Immobilizer- All machine configurations $402
881G217 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G238 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G208 Impact Protection - Laminated Glass - for Canopy builds $536
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $857
881G303 Laminate Glass to replace tempered as standard on cab builds $123
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $673
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $616
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $696
881G220 3 inch wide Seatbelt $59
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $268
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $178
881G222 Radio with Speakers, Aerial and MP3 cable $300
881G237 $569
881G310 $438
881G258 $187
881G212 $694
881G297 $231
Hardide Pivot Pins (For Severe Heavy Duty Applications)
Spark Arrestor Muffler - 4 CYL
Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting
the full left side door
U.S. DOLLAR
PRICE PAGES JCB 190T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013
Additional Soundproofing (for special applications)
Right Hand Mesh to Replace Glass as Standard
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 5 of 9 JCB 190T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
881G288 Tool Kit, Basic $322
881G289 Tool Kit, Full $478
881G287 Reversing Fan $840
881G290 Canopy Wheeled Fender - LH $119
881G291 Cab Wheeled Fender - LH $119
881G294 External Anolog Engine Hourmeter $135
881G308 Pre-cleaner T4 $465
APPLICATION PACKAGES
881G214 $2,009
881G215 $3,348
881G216 $3,014
881G251 $2,281
881G252 $996
881G261 $1,906
881G262 $3,240
881G263 $2,903
881G264 $2,785
881G265 $4,178
881G266 $3,851
881G267 $1,106
881G307 $514
BUCKET ACCESSORIES
881H301 Bolt on Edge for 66" Bucket (1676mm) $293
881H325 Bolt on Edge for 68" bucket (1727mm) $303
881H302 Bolt on Edge for 72" Bucket (1727mm) $312
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $619
881H326 Tooth Bar for 68" bucket - Over bucket (1727mm) $637
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $653
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $619
881H327 Tooth Bar for 68" bucket - Over bolt on edge (1727mm) $637
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $653
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
JCB 190T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: October 1, 2013
Heavy Duty Rear Bars Protective Bars for Adverse Applications, as a stand alone option
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines
Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines
must order G208
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty
Rear Bars - Canopy machines must order G208
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines
must order G208
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel
Mesh to provide protection over laminated cab glass (Not for Canopy Builds)
Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection
over laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been
ordered
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty
Rear Bars - Cab Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines
Only
A/C FOPS Guard
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty
Rear Bars - Canopy Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 9 JCB 190T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket - 21 cu. ft. Capacity 332/L1829 $1,376
Snow Buckets
881U533 60" Snow Blade - Manual Angle 333/L8499 $1,666
881U650 72" Snow Blade - Manual Angle 332/X4347 $1,817
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,020
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,363
881U535 60" Snow Blower - Standard Flow 333/L6154 $6,327
881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U670 72" Snow Push 333/L5629 $3,054
Grapple Attachments
881U210 66" Heavy Duty Brush Grapple 333/L5022 $3,874
881U200 72" Heavy Duty Brush Grapple 332/L4030 $3,999
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $3,397
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $4,126
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $723
Hydraulic Brooms/Sweepers
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $4,997
881U302 Hydraulic angle kit for Angle Broom 332/L3983 $1,358
Hammers
881U354 HM266Q (includes Chisel & Moil) - *881U355 Mounting Bracket required* 980/A7456 $12,278
881U355 Mounting Bracket - Required for HM266Q Hammer 980/28400 $964
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,430
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: October 1, 2013 JCB 190T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 7 of 9 JCB 190T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $970
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $4,391
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $9,032
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $9,485
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,725
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,551
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,018
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $10,825
EFFECTIVE: October 1, 2013 JCB 190T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 8 of 9 JCB 190T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U531 66" Manure Forks with Top Grapple 333/L6106 $2,725
881U550 72" Manure Forks with Top Grapple 332/L3869 $3,028
881U532 Bale Spear 333/L5627 $821
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,900
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $17,409
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $17,712
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
EFFECTIVE: October 1, 2013 JCB 190T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 9 of 9 JCB 190T Compact Tracked USD Price Page
JCB SKID STEER LOADER
205NEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR.
EFFECTIVE: OCTOBER, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
JCB 205 SKID STEER LOADER
2.5L (151.4CID) 62 SAE Gross hp, Kohler KDI 2504 TCR engine, centrifugal
dry type dual stage air cleaner. Fuel filter with water separator; 1000 CCA
battery; variable speed hydraulically driven fan.
EFFECTIVE: OCTOBER, 2013
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 7.5 mph in both forward
and reverse. Optional Creep speed provides operation from 0 - 1/2 of full speed for special
applications. An optional two speed transmission is available providing a low range of 0 - 7.5
mph and a high range of 0 - 11.5 mph.
Machine braking provided through the hydrostatic transmission. Parking brake consists of
multiple disc, oil immersed, spring applied hydraulic release that provides a fail safe with the
engine off. Electrically activated through a switch on the instrument panel or by raising seat
bar.
10 x 16.5 8 ply, Heavy Duty WIDE TRACK JCB Tires providing 63" width.
18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.
Rated Operating Capacity of 2050 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of
hydraulic powered attachments. Choice of Standard Mechanical or Optional Powered Quick
Hitch. Hydraulic Float standard on all models. Loader Options include: Parallel Lift in raise only
and SRS (smooth ride system).
Audible and visual warning systems, right and left side mounted instrument
panels. Standard electronic throttle control with optional foot throttle.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and
operator restraint interlock for drive and loader functions. Cab units are
pressurized and available with heat or heat and A/C, sliding left window and
full side door. Right Hand glass as standard on canopy and cabs.
Cab tilts forward to provide further access to the hydraulic components. Rear
door provides class leading access to engine bay and daily maintenance and
check points.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front
and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.
LOADER
All prices and specifications subject to change without notice Page 2 of 9 JCB 205 Skid Steer USD Price Page
JCB 205 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8604A 8604BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8604 JCB 205 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width)
881B206
881B226
881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F206
881G305 Block Heater - 110V Kohler Engine
881G201 Foot Throttle (for JCB Servo Controls)
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T)
881G280 2 Speed Motors - Wheeled
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift)
SUGGESTED LIST PRICE $41,175 $49,028
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm
Float and Mechanical Quickhitch. - 4 CYL
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function
Joystick Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 4 CYL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8604 JCB 205 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $37,092
TIRE SETS (E) pick one
881A201 10 x 16.5 8PR HD Tires & Wheels (provides 59.8" width) $0
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width) $46
881A205 10x 16.5 10PR Lifemaster Industrial Pneumatic Tires & Wheels (provides 59.8" width) $721
881A206 10x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Tire & Wheels (provides 63" width) $747
881A207 31.5/13 x 16.5 8PR SK Hauler High Floatation Tires & Wheels (provides 64.7" width) $901
881A208 7x 15 Solid Industrial Tires and Wheels (provides 54.3" width) $1,442
881A209 10 x 16.5 Brawler Solid Flex Industrial Tires & Wheels (provides 59.8" width) $1,803
881A213 7 x 15 14PR Pneumatic Tires and Wheels (provides 53.9" width) $824
881A216 33 x 6 x 10 Slick Brawler Solid Flex Industrial $1,937
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B205 $642
881B206 $709
Cab with Heater Packages
881B215 $2,561
881B216 $2,627
Cab with Heater and A/C Packages
881B225 $4,246
881B226 $4,312
MACHINE CONTROLS (E)
881C202 $1,061
881C205 $1,618JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
JCB 205 SKID STEER LOADER EFFECTIVE: October 1, 2013
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 4 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 4 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual Pattern
Control, Reversing Fan and Roadlights) - 4 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 4 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 4 CYL
JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
Enclosed Cab, Heater w A/C, Wiper & Sliding LH Window (Cannot order options with this package - High
Flow, SRS, Powered Quickhitch, Dual Pattern Control, Reversing Fan and Roadlights) - 4 CYL
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 3 of 9 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D347 GP Bucket - 60" - 12.7 cu-ft $947
881D301 GP Bucket - 66" - 14.1 cu-ft $962
881D340 GP Bucket - 68" - 14.3 cu-ft $1,004
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,593
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,622
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,620
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,649
Landscape Buckets
881D349 Landscape Bucket - 60" - 15.8 cu-ft $925
881D305 Landscape Bucket - 66" - 17.5 cu-ft $959
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,590
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,616
6 in 1 Buckets
881D365 6 In 1 Multipurpose Bucket - 60" - 12.2cu-ft $3,420
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft $3,501
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,132
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,159
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 205 SKID STEER LOADER EFFECTIVE: October 1, 2013
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 4 of 9 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F206 High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option) $1,052
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G210 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $881
881G213 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $889
881G305 Block Heater - 110V Kohler Engine $134
881G231 Rotating Beacon and Socket $140
881G254 Worklights with 2 rear lights for non A/C machines $134
881G295 ISO & Dual Hand Control Pattern $558
881G301 Creep Speed $125
881G304 White Noise Reverse Alarm $189
881G282 Powered Quick Hitch $782
Loader Options
881G283 SRS, Smooth Ride System - Vertical Lift $1,005
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift) $1,005
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T) $494
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 190, 205, 190T, 205T) $494
Hydraulic Options
881G280 2 Speed Motors - Wheeled $1,502
881G221 Biodegradable Oils $303
Operators Compartment Options
881G201 Foot Throttle (for JCB Servo Controls) $196
881G205 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G211 Key Start/ Key Immobilizer- All machine configurations $402
881G217 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G238 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G208 Impact Protection - Laminated Glass - for Canopy builds $536
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $857
881G303 Laminate Glass to replace tempered as standard on cab builds $123
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $673
881G279 Vinyl Mechanical Suspension Seat $240
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $616
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $696
881G220 3 inch wide Seatbelt $59
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $268
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $178
881G222 Radio with Speakers, Aerial and MP3 cable $300
881G236 $670
881G310 Additional Soundproofing (for special applications) $438
881G258 Right Hand Mesh to Replace Glass as Standard $187
881G212 Hardide Pivot Pins (For Severe Heavy Duty Applications) $694
881G296 Spark Arrestor Muffler - 3 CYL $231
881G229 Twine Cutter - Wheeled Machines Only $134
Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when
getting the full left side door
U.S. DOLLAR
PRICE PAGES JCB 205 SKID STEER LOADER EFFECTIVE: October 1, 2013
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 5 of 9 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
881G288 Tool Kit, Basic $322
881G289 Tool Kit, Full $478
881G287 Reversing Fan $840
881G290 Canopy Wheeled Fender - LH $119
881G291 Cab Wheeled Fender - LH $119
881G294 External Anolog Engine Hourmeter $135
881G308 Pre-cleaner T4 $465
APPLICATION PACKAGES
881G214 $2,009
881G215 $3,348
881G216 $3,014
881G251 $2,281
881G252 $996
881G261 $1,906
881G262 $3,240
881G263 $2,903
881G264 $2,785
881G265 $4,178
881G266 $3,851
881G267 $1,106
881G307 $514
BUCKET ACCESSORIES
881H320 Bolt on Edge for 60" bucket (1524mm) $273
881H301 Bolt on Edge for 66" Bucket (1676mm) $293
881H325 Bolt on Edge for 68" bucket (1727mm) $303
881H322 Tooth Bar for 60" bucket - Over bucket (1524mm) $609
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $619
881H326 Tooth Bar for 68" bucket - Over bucket (1727mm) $637
881H324 Tooth Bar for 60" bucket - Over bolt on edge (1524mm) $609
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $619
881H327 Tooth Bar for 68" bucket - Over bolt on edge (1727mm) $637
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
JCB 205 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: October 1, 2013
Heavy Duty Rear Bars Protective Bars for Adverse Applications, as a stand alone option
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines
Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines
must order G208
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty
Rear Bars - Canopy machines must order G208
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines
must order G208
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel
Mesh to provide protection over laminated cab glass (Not for Canopy Builds)
Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection
over laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been
ordered
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty
Rear Bars - Cab Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines
Only
A/C FOPS Guard
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty
Rear Bars - Canopy Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 9 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket - 21 cu. ft. Capacity 332/L1829 $1,376
Snow Buckets
881U533 60" Snow Blade - Manual Angle 333/L8499 $1,666
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,020
881U535 60" Snow Blower - Standard Flow 333/L6154 $6,327
881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U670 72" Snow Push 333/L5629 $3,054
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $3,749
881U210 66" Heavy Duty Brush Grapple 333/L5022 $3,874
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $2,668
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $3,397
Hydraulic Brooms/Sweepers
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $4,997
881U302 Hydraulic angle kit for Angle Broom 332/L3983 $1,358
Hammers
881U354 HM266Q (includes Chisel & Moil) - *881U355 Mounting Bracket required* 980/A7456 $12,278
881U355 Mounting Bracket - Required for HM266Q Hammer 980/28400 $964
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,430
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: October 1, 2013 JCB 205 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 7 of 9 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $970
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $4,391
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $7,923
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $8,335
EFFECTIVE: October 1, 2013 JCB 205 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 8 of 9 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,424
881U531 66" Manure Forks with Top Grapple 333/L6106 $2,725
881U532 Bale Spear 333/L5627 $821
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,900
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $17,409
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $17,712
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
EFFECTIVE: October 1, 2013 JCB 205 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 9 of 9 JCB 205 Skid Steer USD Price Page
JCB COMPACT TRACK LOADER
205TNEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR.
EFFECTIVE: OCTOBER 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
EFFECTIVE: OCTOBER 1,
2013 JCB 205T COMPACT TRACK LOADER
SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat
with seatbelt and operator restraint interlock for drive and loader functions.
Cab units are pressurized and available with heat or heat and A/C, sliding left
window and full side door. Right Hand glass as standard on canopy and cab
builds.
Machine braking provided through the hydrostatic transmission. Parking brake consists of
multiple disc, oil immersed, spring applied hydraulic release that provides a fail safe with the
engine off. Electrically activated through a switch on the instrument panel or by raising seat
bar.
Fitted with 12.6" (320mm) wide tracks provide a machine with of 66" and a ground bearing
pressure of 6.5 psi.
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 5.6 mph in both forward
and reverse. Optional Creep speed provides operation from 0 to 1/2 of full speed for special
applications. An optional two (2) speed transmission is available providing a low range of 0 -
5.6 mph and a high range of 0 - 7.8 mph
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument
panels. Standard electronic throttle control with optional foot throttle.
2.5L (151.4CID) 62 SAE Gross hp, Kohler KDI 2504 TCR engine, centrifugal
dry type dual stage air cleaner. Fuel filter with water separator; 1000 CCA
battery; variable speed hydraulically driven fan.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides
access to engine bay and daily maintenance and check points.
18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.
Rated Operating Capacity of 2050 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of
hydraulic powered attachments. Choice of Standard Mechanical or Optional Powered Quick
Hitch. Hydraulic Float standard on all models. Loader Options include: Parallel Lift in raise only
and SRS (smooth ride system).
All prices and specifications subject to change without notice Page 2 of 9 JCB 205T Compact Tracked USD Price Page
JCB 205T SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: OCTOBER 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8612A 8612BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8612 JCB 205T Tier 4Tracked, Vertical Lift, New Generation, Compact Tracked Loader
881A222 320 mm Wide Rubber Track Set - 4 Roller (provides 66" width)
881B236
881B256
881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F206
881G225 Engine Block Heater- 110V
881G201 Foot Throttle (for JCB Servo Controls)
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T)
881G281 2 Speed - Tracked
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift)
SUGGESTED LIST PRICE $52,011 $59,888
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm
Float and Mechanical Quickhitch. - 4 CYL
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function
Joystick Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 4 CYL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 205T Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8612 JCB 205T Tier 4Tracked, Vertical Lift, New Generation, Compact Tracked Loader $48,615
TRACKS (E)
881A222 320 mm Wide Rubber Track Set - 4 Roller (provides 66" width) $0
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B235 $618
881B236 $684
Cab with Heater Packages
881B245 $2,495
881B246 $2,561
Cab with Heater and A/C Packages
881B255 $4,246
881B256 $4,312
MACHINE CONTROLS (E)
881C202 $1,061
881C205 $1,618
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 4 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 4 CYL
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
JCB 205T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. - 4 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual Pattern
Control, Reversing Fan and Roadlights) - 4 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual
Pattern Control, Reversing Fan and Roadlights) - 4 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch. - 4 CYL
JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 3 of 9 JCB 205T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D301 GP Bucket - 66" - 14.1 cu-ft $962
881D340 GP Bucket - 68" - 14.3 cu-ft $1,004
881D302 GP Bucket - 72" - 15.4 cu-ft $1,043
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,593
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,622
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,674
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,620
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,649
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,702
Landscape Buckets
881D305 Landscape Bucket - 66" - 17.5 cu-ft $959
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,056
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,590
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,687
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,616
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,714
6 in 1 Buckets
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft $3,501
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft $3,771
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,132
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,402
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,159
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,429
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 205T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 4 of 9 JCB 205T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F206 High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option) $1,052
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G210 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $881
881G213 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $889
881G305 Block Heater - 110V Kohler Engine $134
881G231 Rotating Beacon and Socket $140
881G254 Worklights with 2 rear lights for non A/C machines $134
881G295 ISO & Dual Hand Control Pattern $558
881G301 Creep Speed $125
881G304 White Noise Reverse Alarm $189
881G282 Powered Quick Hitch $782
Loader Options
881G283 SRS, Smooth Ride System - Vertical Lift $1,005
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift) $1,005
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T) $494
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 190, 205, 190T, 205T) $494
Hydraulic Options
881G281 2 Speed - Tracked $1,502
881G221 Biodegradable Oils $303
Operators Compartment Options
881G201 Foot Throttle (for JCB Servo Controls) $196
881G205 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G211 Key Start/ Key Immobilizer- All machine configurations $402
881G217 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G238 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G208 Impact Protection - Laminated Glass - for Canopy builds $536
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $857
881G303 Laminate Glass to replace tempered as standard on cab builds $123
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $673
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $616
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $696
881G220 3 inch wide Seatbelt $59
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $268
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $178
881G222 Radio with Speakers, Aerial and MP3 cable $300
881G237 $569
881G310 Additional Soundproofing (for special applications) $438
881G258 Right Hand Mesh to Replace Glass as Standard $187
881G212 Hardide Pivot Pins (For Severe Heavy Duty Applications) $694
881G297 Spark Arrestor Muffler - 4 CYL $231
Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the full
left side door
U.S. DOLLAR
PRICE PAGES JCB 205T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 5 of 9 JCB 205T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
881G212 Hardide Pivot Pins (For Severe Heavy Duty Applications) $694
881G297 Spark Arrestor Muffler - 4 CYL $231
881G288 Tool Kit, Basic $322
881G289 Tool Kit, Full $478
881G287 Reversing Fan $840
881G290 Canopy Wheeled Fender - LH $119
881G291 Cab Wheeled Fender - LH $119
881G294 External Anolog Engine Hourmeter $135
881G308 Pre-cleaner T4 $465
APPLICATION PACKAGES
881G214 $2,009
881G215 $3,348
881G216 $3,014
881G251 $2,281
881G252 $996
881G261 $1,906
881G262 $3,240
881G263 $2,903
881G264 $2,785
881G265 $4,178
881G266 $3,851
881G267 $1,106
881G307 $514
BUCKET ACCESSORIES
881H301 Bolt on Edge for 66" Bucket (1676mm) $293
881H325 Bolt on Edge for 68" bucket (1727mm) $303
881H302 Bolt on Edge for 72" Bucket (1727mm) $312
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $619
881H326 Tooth Bar for 68" bucket - Over bucket (1727mm) $637
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $653
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $619
881H327 Tooth Bar for 68" bucket - Over bolt on edge (1727mm) $637
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $653
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
JCB 205T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: October 1, 2013
Heavy Duty Rear Bars Protective Bars for Adverse Applications, as a stand alone option
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must
order G208
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear
Bars - Canopy machines must order G208
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must
order G208
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to
provide protection over laminated cab glass (Not for Canopy Builds)
Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been ordered
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear
Bars - Cab Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines Only
A/C FOPS Guard
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear
Bars - Canopy Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 9 JCB 205T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket - 21 cu. ft. Capacity 332/L1829 $1,376
Snow Removal Attachments
881U533 60" Snow Blade - Manual Angle 333/L8499 $1,666
881U650 72" Snow Blade - Manual Angle 332/X4347 $1,817
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,020
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,363
881U535 60" Snow Blower - Standard Flow 333/L6154 $6,327
881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U670 72" Snow Push 333/L5629 $3,054
Grapple Attachments
881U210 66" Heavy Duty Brush Grapple 333/L5022 $3,874
881U200 72" Heavy Duty Brush Grapple 332/L4030 $3,999
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $3,397
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $4,126
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $723
Hydraulic Brooms/Sweepers
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $4,997
881U302 Hydraulic angle kit for Angle Broom 332/L3983 $1,358
Hammers
881U354 HM266Q (includes Chisel & Moil) - *881U355 Mounting Bracket required* 980/A7456 $12,278
881U355 Mounting Bracket - Required for HM266Q Hammer 980/28400 $964
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,430
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: October 1, 2013 JCB 205T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 7 of 9 JCB 205T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $970
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $4,391
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $9,032
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $9,485
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,725
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,551
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,018
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $10,825
EFFECTIVE: October 1, 2013 JCB 205T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 8 of 9 JCB 205T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U531 66" Manure Forks with Top Grapple 333/L6106 $2,725
881U550 72" Manure Forks with Top Grapple 332/L3869 $3,028
881U532 Bale Spear 333/L5627 $821
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,900
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $17,409
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $17,712
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
EFFECTIVE: October 1,
2013 JCB 205T COMPACT TRACK LOADER
U.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F206
All prices and specifications subject to change without notice Page 9 of 9 JCB 205T Compact Tracked USD Price Page
JCB SKID STEER LOADER
225NEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY, 2013
STANDARD EQUIPMENT
Engine
Transmission
Tires: Front & Rear
Brakes
Electrical
Instruments
Cab or Canopy
Hydraulics
Loader
Serviceability
JCB 225 SKID STEER LOADER
Servo Controls with hydrostatic transmission. Optional Creep Speed provides operation from 0
to 1/2 of full speed for special applications. An optional two (2) speed transmission is available
providing a low range of 0 - 6.8 mph and a high range of 0 - 12.4 mph.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner.
Fuel filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.
12 x 16.5 10 ply, Heavy Duty JCB Tires providing 67.9" width.
Rated Operating Capacity of 2225 lbs, Radial Lift Loader Design provides for maximum loader lift
breakout force for superior digging performance. Auxiliary circuit is standard for operation of
hydraulic powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch.
Hydraulic float standard on all models. Loader options include: Parallel Lift in raise only, SRS
(smooth ride system) left hand auxiliary pipework.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple
disc, oil immersed, spring applied hydraulic release that provides a fail safe with engine off.
Electrically activated through a switch on the instrument panel or by raising seat bar.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides
class leading access to engine bay and daily maintenacne and check points.
Meets IP69 water ingress standard. Worklights, 2 Front and 1 Rear, Reverse Alarm, Horn, and
12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels. Standard
electronic throttle control with optional foot throttle.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with retractable seatbelt and operator
restraint interlock for drive and loader functions. Cab units are pressurized and available with
heat or heat and A/C, sliding left window, and full side door. Right Hand glass standard on canopy
and cab builds.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
All prices and specifications subject to change without notice Page 2 of 10 JCB 225 Skid Steer USD Price Page
JCB 225 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8605A 8605BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8605 JCB 225 Wheeled, Radial Lift, New Generation, Skid Steer Loader
881A302 12 X 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width)
881B309 Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
881B329
881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
881C312
881D302 GP Bucket - 72" - 15.4 cu-ft
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F307 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F308
881G025 Engine Block Heater- 110V
881G084 Foot Throttle
881G091 Vinyl Air Suspension Seat
881G095 Parallel Lift Radial Lift Models - 225 & 225T
881G073 2 Speed - Wheeled Machines
881G077 Smooth Ride System (SRS)
SUGGESTED LIST PRICE $42,394 $50,601
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required if High Flow ordered.
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 225 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8605 JCB 225 Wheeled, Radial Lift, New Generation, Skid Steer Loader $38,022
TIRE SETS (E) pick one
881A301 12 X 16.5 10PR HD Tires and Wheels (provides 67.9" width) $0
881A302 12 X 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width) $54
881A305 12 X 16.5 10PR Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 67.9" width) $814
881A306 12 X 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 71.7" width) $857
881A307 33/15.5 X 16.5 14PR SK Hauler High Floatation Tires and Wheels (provides 72" width) $1,018
881A308 8 X 16 Solid Industrial Tires and Wheels (provides 63" width) $1,607
881A309 12 X 16.5 Brawler Solid Flex Industrial Tires and Wheels (provides 66" width) $2,410
881A316 12 X 16.5 Slick Brawler Solid Flex Industrial $2,544
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B308 $804
881B309 $872
Cab with Heater Packages
881B318 $2,756
881B319 $2,823
Cab with Heater and A/C Packages
881B328 $4,576
881B329 $4,645
MACHINE CONTROLS (E)
881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics $1,070
881C312 $1,616
JCB 225 SKID STEER LOADER
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required if
High Flow ordered.
EFFECTIVE: MAY, 2013
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch.
(Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual Lock
Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual
Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 225 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D301 GP Bucket - 66" - 14.1 cu-ft $962
881D340 GP Bucket - 68" - 14.3 cu-ft $1,004
881D302 GP Bucket - 72" - 15.4 cu-ft $1,043
881D341 GP Bucket - 75" - 15.8 cu-ft $1,093
881D303 GP Bucket - 78" - 16.7 cu-ft $1,135
881D304 GP Bucket - 84" - 18.1 cu-ft $1,506
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,593
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,622
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,674
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,721
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,767
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,137
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,620
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,649
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,702
881D345 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,748
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,793
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,164
Landscape Buckets
881D305 Landscape Bucket - 66" - 17.5 cu-ft $959
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,056
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,151
881D308 Landscape Bucket - 84" 22.7 cu-ft $1,402
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,590
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,687
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,781
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,033
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,616
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,714
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,808
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,060
6 in 1 Buckets
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft $3,501
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft $3,771
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,295
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,848
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,132
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,402
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,927
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,480
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,159
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,429
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,953
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,507
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 225 SKID STEER LOADER EFFECTIVE: MAY, 2013
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 225 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F307 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F308 $1,232
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $889
881G079 Roadlight Kit with Brake lights for A/C machines $889
881G089 Grid Heater for Canopy builds (Starting aid) $129
881G025 Engine Block Heater- 110V $134
881G031 Rotating Beacon and Socket $140
881G076 Worklights with 2 rear lights for non A/C machines $41
881G043 White Noise Reverse Alarm $189
881G096 ISO & Dual Hand Control Pattern Changeover $558
881G099 Creep Speed $125
Loader Options
881G077 Smooth Ride System (SRS) $1,005
881G095 Parallel Lift Radial Lift Models - 225 & 225T $514
Hydraulic Options
881G073 2 Speed - Wheeled Machines $1,517
881G021 Biodegradable Oils $305
881G102 $525
881G103 $525
881G075 Electric Quick Hitch $803
Operators Compartment Options
881G084 Foot Throttle $204
881G017 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G024 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G005 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G011 Key Start/ Key Immobilizer- All machine configurations $402
881G008 Impact Protection - Laminated Glass - for Canopy builds $536
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,692
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $857
881G107 Laminate glass to replace tempered glass as standard on cab builds ONLY - Tier 4 $124
881G071 Front Mesh Guard for canopy machines (NO front glass required) $673
881G091 Vinyl Air Suspension Seat $616
881G019 Cloth Air Suspension Seat $696
881G105 Mechanical Suspension Seat $240
881G020 3 inch Seatbelt $59
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $268
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $178
881G022 Radio with Speakers and Aerial $300
881G036 $670
881G054 Right Hand Mesh to Replace Glass as Standard $161
Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting
the full left side door.
Auxiliary Hydraulic Coupler Placement- Left Hand Side (Not compatible with High Flow Option)
Auxiliary Coupler Placement Left hand Side with 14 Pin Connector - Compatible with Multi-function Joysticks (not compatible with High Flow)
U.S. DOLLAR
PRICE PAGES JCB 225 SKID STEER LOADER EFFECTIVE: MAY, 2013
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 225 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED ( - do not need to order if included in operator enclosure packages)
881G012 Hardide Pivot Pins (For Severe Heavy Duty Applications) $722
881G029 Twine Cutter - wheeled machines only $134
881G083 Tool Kit - Basic $322
881G098 Tool Kit - Full $478
881G082 Reversing Fan $840
881G087 Canopy Wheeled Fender & Fuel Cap Protection $120
881G088 Cab Wheeled Fender & Fuel Cap Protection $120
APPLICATION PACKAGES
881G014 $2,009
881G015 $3,348
881G016 $3,014
881G051 $2,281
881G052 $996
881G061 $1,906
881G062 $3,240
881G063 $2,903
881G064 $2,785
881G065 $4,178
881G066 $3,851
881G070 $1,005
881G072 $514
BUCKET ACCESSORIES
881H301 Bolt on Edge For 66" Bucket (1676mm) $293
881H325 Bolt on Edge for 68" bucket (1727mm) $303
881H302 Bolt on Edge For 72" Bucket (1727mm) $312
881H316 Bolt on Edge for 75" bucket (1905mm) $321
881H303 Bolt on Edge For 78" Bucket (1829mm) $330
881H304 Bolt on Edge For 84" Bucket (1981mm) $365
881H305 Tooth Bar for 66" Bucket - over Bucket (1676mm) $619
881H326 Tooth Bar for 68" bucket - Over bucket (1727mm) $637
881H306 Tooth Bar for 72" Bucket - over Bucket (1727mm) $653
881H317 Tooth Bar for 75" bucket - over bucket (1905mm) $664
881H307 Tooth Bar for 78" Bucket - over Bucket (1829mm) $675
881H308 Tooth Bar for 84" Bucket - over Bucket (1981mm) $767
881H309 Tooth Bar for 66" Bucket - over Bolt on Edge (1676mm) $619
881H327 Tooth Bar for 68" bucket - Over bolt on edge (1727mm) $637
881H310 Tooth Bar for 72" Bucket - over Bolt on Edge (1727mm) $653
881H318 Tooth Bar for 75" bucket - over bolt on edge (1905mm) $664
881H311 Tooth Bar for 78" Bucket - over Bolt on Edge (1829mm) $675
881H312 Tooth Bar for 84" Bucket - over Bolt on Edge (1981mm) $767
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
JCB 225 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars -
Canopy machines must order G008
EFFECTIVE: MAY, 2013
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass.
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Cab machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
A/C FOPS Guard
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Heavy Duty Rear Bars for Adverse Applications
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 225 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $1,949
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $1,817
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,120
881U217 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) 334/L5922 $438
Snow Buckets
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $1,776
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,588
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $2,952
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $2,312
881U215 Bolt on Edge for 96" Snow Bucket (2438mm) 334/L5920 $573
881U216 Bolt on Edge for 108" Snow Bucket (2743mm) 334/L5921 $510
Grapple Attachments
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,289
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,547
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,862
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,483
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $4,856
Hydraulic Brooms/Sweepers
881U248 72" Pick-Up Sweeper 334/P2836 $6,775
881U249 84" Pick-Up Sweeper 334/P2839 $7,275
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,124
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,252
881U302 Hydraulic angle kit for 72" or 84" Angle Broom 332/L3983 $1,358
Hammers
881U352 HM386Q (includes Chisel & Moil) - *881U353 Mounting Bracket required* 980/A3483 $13,145
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,829
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,970
881U401 Planetary Drive Auger - HIGH FLOW - (includes mounting bracket & hoses) 332/L3979 $5,548
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: MAY, 2013 JCB 225 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 8 of 10 JCB 225 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,711
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,060
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $9,485
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,752
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,918
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $11,354
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,290
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $9,840
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,152
881U508 66" Auto Rake - Standard Flow 332/L7253 $10,676
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,067
881U510 66" Tiller - 6 inch tines - HIGH FLOW 332/X4380 $5,450
881U511 78" Tiller - 6 inch tines - HIGH FLOW 332/X4381 $6,510
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,018
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,604
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $10,825
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,375
Forestry Cutters
881U516 60" Forestry Cutting Head - HIGH FLOW 334/L8351 $26,416
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,635
EFFECTIVE: MAY, 2013 JCB 225 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 9 of 10 JCB 225 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,013
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,444
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,055
881U532 Bale Spear 333/L5627 $821
Trenchers
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
881U522 48" Trencher with 6" wide chain, crumber and hoses - HIGH FLOW 332/X4290 $7,493
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 332/X4291 $7,095
881U524 72" Brush Cutter - HIGH FLOW 332/X4292 $7,238
881U525 78' Brush Cutter - HIGH FLOW 332/X4293 $7,569
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $21,020
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $21,308
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
Saws
881U611 Rock Saw - 18" Depth - HIGH FLOW 332/L7244 $19,952
Snow Removal Attachments
881U650 72" Snow Blade - Manual Angle 332/X4347 $1,817
881U651 84" Snow Blade - Manual Angle 332/X4348 $1,968
881U652 96" Snow Blade - Manual Angle 332/X4349 $2,120
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,363
881U654 84" Snow Blade - Hydraulic Angle 332/X4351 $2,605
881U655 96" Snow Blade - Hydraulic Angle 332/X4352 $2,725
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $5,093
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U665 84" Snow Blower - Standard Flow 332/X4385 $7,842
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U662 84" Snow Blower - HIGH FLOW 332/X4401 $13,622
881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085
881U670 72" Snow Push 333/L5629 $3,054
881U671 84" Snow Push 333/L5640 $3,147
881U672 96" Snow Push 333/L5646 $3,548
EFFECTIVE: MAY, 2013 JCB 225 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 10 of 10 JCB 225 Skid Steer USD Price Page
JCB COMPACT TRACK LOADER
225TNEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
Engine
Transmission
Rubber Tracks:
Brakes
Electrical
Instruments
Cab or Canopy
Hydraulics
Loader
Serviceability
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Fitted with 12.6" (320mm) wide tracks provide a machine with of 73" and a
ground bearing pressure of 4.8 psi. Optional 17.7' (450mm) wide tracks reduce
ground bearing pressure to 4.36 psi.
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 6.8 mph in
both forward and reverse. Optional Creep Speed provides operation from 0 to
50% of full speed for special applications. An optional two (2) speed
transmission is available providing a low range of 0 - 6.8 mph and a high range of
0 - 12.4 mph.
EFFECTIVE: MAY 1, 2013 JCB 225T COMPACT TRACK LOADER
Cab tilts forward to provide further access to the hydraulic components. Rear
door provides class leading access to engine bay and daily maintenacne and
check points.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual
stage air cleaner. Fuel filter with water separator; 1000 CCA battery; variable
speed hydraulically driven fan.
Meets IP69 water ingress standard. Worklights, 2 Front and 1 Rear, Reverse
Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument
panels. Standard electronic throttle control with optional foot throttle.
SAE certified ROPS/FOPS, left side entry. Mechancial vinyl suspension seat with
retractable seatbelt and operator restraint interlock for drive and loader
functions. Cab units are pressurized and available with heat or heat and A/C,
sliding left window, and full side door. Right Hand glass standard on canopy and
cab builds.
Machine braking provided through the hydrostatic transmission. Parking brake
consists of multiple disc, oil immersed, spring applied hydraulic release that
provides a fail safe with engine off. Electrically activated through a switch on the
instrument panel or by raising seat bar.
Rated Operating Capacity of 2250 lbs, Radial Lift Loader Design provides for
maximum loader lift breakout force for superior digging performance. Auxiliary
circuit is standard for operation of hydraulic powered attachments. Choice of
Standard Mechanical or Optional Electric Quick Hitch. Hydraulic float standard
on all models. Loader options include: Parallel Lift in raise only, SRS (smooth
ride system) left hand auxiliary pipework.
All prices and specifications subject to change without notice Page 2 of 10 JCB 225T Compact Tracked USD Price Page
JCB 225T SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8613A 8613BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8613 JCB 225T Tracked, Radial Lift, New Generation, Compact Tracked Loader
881A321 12.6 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 73"
881B339 Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
881B359
881C311
881C312
881D341
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F307 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F308
881G025
881G084 Foot Throttle
881G095 Parallel Lift Radial Lift Models - 225 & 225T
881G074 2 Speed - Tracked Machines
881G077 Smooth Ride System (SRS)
SUGGESTED LIST PRICE $54,028 $62,235
JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
GP Bucket - 75" - 15.8 cu-ft
Engine Block Heater- 110V
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required if High Flow ordered.
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 225T Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8613 JCB 225T Tracked, Radial Lift, New Generation, Compact Tracked Loader $50,276
TRACKS (E)
881A321 12.6 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 73" In Base
881A322 17.7 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 78" $803
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B338 $804
881B339 $872
Cab with Heater Packages
881B348 $2,756
881B349 $2,823
Cab with Heater and A/C Packages
881B358 $4,576
881B359 $4,645
MACHINE CONTROLS (E)
881C311 $1,070
881C312 $1,616
JCB 225T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required if High
Flow ordered.
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch.
(Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual Lock
Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual
Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 225T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D341 GP Bucket - 75" - 15.8 cu-ft $1,093
881D303 GP Bucket - 78" - 16.7 cu-ft $1,135
881D304 GP Bucket - 84" - 18.1 cu-ft $1,506
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,721
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,767
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,137
881D345 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,748
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,793
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,164
LANDSCAPE BUCKETS
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,151
881D308 Landscape Bucket - 84" 22.7 cu-ft $1,402
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,781
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,033
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,808
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,060
6 IN 1 Buckets
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,927
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,480
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,953
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,507
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 225T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 225T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F307 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F308 $1,232
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $889
881G079 Roadlight Kit with Brake lights for A/C machines $889
881G089 Grid Heater for Canopy builds (Starting aid) $129
881G025 Engine Block Heater- 110V $134
881G031 Rotating Beacon and Socket $140
881G076 Worklights with 2 rear lights for non A/C machines $41
881G043 White Noise Reverse Alarm $189
881G096 ISO & Dual Hand Control Pattern Changeover $558
881G099 Creep Speed $125
Loader Options
881G077 Smooth Ride System (SRS) $1,005
881G095 Parallel Lift Radial Lift Models - 225 & 225T $514
Hydraulic Options
881G074 2 Speed - Tracked Machines $1,517
881G021 Biodegradable Oils $305
881G102 $525
881G103 $525
881G075 Electric Quick Hitch $803
Operators Compartment Options
881G084 Foot Throttle $204
881G017 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G024 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G005 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G011 Key Start/ Key Immobilizer- All machine configurations $402
881G008 Impact Protection - Laminated Glass - for Canopy builds $536
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,692
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $857
881G107 Laminate glass to replace tempered glass as standard on cab builds ONLY - Tier 4 $124
881G071 Front Mesh Guard for canopy machines (NO front glass required) $673
881G091 Vinyl Air Suspension Seat $616
881G019 Cloth Air Suspension Seat $696
881G020 3 inch Seatbelt $59
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $268
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $178
881G022 Radio with Speakers and Aerial $300
881G037 $569
881G054 Right Hand Mesh to Replace Glass as Standard $161
Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side
door.
Auxiliary Coupler Placement Left hand Side with 14 Pin Connector - Compatible with Multi-function Joysticks (not compatible with High Flow)
Auxiliary Hydraulic Coupler Placement- Left Hand Side (Not compatible with High Flow Option)
U.S. DOLLAR
PRICE PAGES JCB 225T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 225T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
881G012 Hardide Pivot Pins (For Severe Heavy Duty Applications) $722
881G083 Tool Kit - Basic $322
881G098 Tool Kit - Full $478
881G082 Reversing Fan $840
881G100 Canopy Tracked Fender & Fuel Cap Protection $120
881G101 Cab Tracked Fender & Fuel Cap Protection $120
APPLICATION PACKAGES
881G014 $2,009
881G015 $3,348
881G016 $3,014
881G051 $2,281
881G052 $996
881G061 $1,906
881G062 $3,240
881G063 $2,903
881G064 $2,785
881G065 $4,178
881G066 $3,851
881G070 $1,005
881G072 $514
BUCKET ACCESSORIES
881H316 Bolt on Edge for 75" bucket (1905mm) $321
881H303 Bolt on Edge For 78" Bucket (1829mm) $330
881H304 Bolt on Edge For 84" Bucket (1981mm) $365
881H317 Tooth Bar for 75" bucket - over bucket (1905mm) $664
881H307 Tooth Bar for 78" Bucket - over Bucket (1829mm) $675
881H308 Tooth Bar for 84" Bucket - over Bucket (1981mm) $767
881H318 Tooth Bar for 75" bucket - over bolt on edge (1905mm) $664
881H311 Tooth Bar for 78" Bucket - over Bolt on Edge (1829mm) $675
881H312 Tooth Bar for 84" Bucket - over Bolt on Edge (1981mm) $767
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines
only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass.
Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass.
A/C FOPS Guard
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Canopy
machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Heavy Duty Rear Bars for Adverse Applications
JCB 225T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars - Canopy
machines must order G008
EFFECTIVE: MAY, 2013
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 225T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,176
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $1,949
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $1,817
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,120
881U217 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) 334/L5922 $438
Snow Buckets
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $1,776
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,588
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $2,952
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $2,312
881U215 Bolt on Edge for 96" Snow Bucket (2438mm) 334/L5920 $573
881U216 Bolt on Edge for 108" Snow Bucket (2743mm) 334/L5921 $510
Grapple Attachments
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,547
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,862
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $4,856
Hydraulic Brooms/Sweepers
881U248 72" Pick-Up Sweeper 334/P2836 $6,775
881U249 84" Pick-Up Sweeper 334/P2839 $7,275
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,124
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,252
881U302 Hydraulic angle kit for 72" or 84" Angle Broom 332/L3983 $1,358
Hammers
881U352 HM386Q (includes Chisel & Moil) - *881U353 Mounting Bracket required* 980/A3483 $13,145
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,829
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,970
881U401 Planetary Drive Auger - HIGH FLOW - (includes mounting bracket & hoses) 332/L3979 $5,548
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: MAY, 2013 JCB 225T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 8 of 10 JCB 225T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,711
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,060
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $9,485
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,752
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,918
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $11,354
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,290
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $9,840
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,152
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,067
881U510 66" Tiller - 6 inch tines - HIGH FLOW 332/X4380 $5,450
881U511 78" Tiller - 6 inch tines - HIGH FLOW 332/X4381 $6,510
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,018
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,604
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $10,825
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,375
Forestry Cutters
881U516 60" Forestry Cutting Head - HIGH FLOW 334/L8351 $26,416
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,635
881U519 96" Dozer Blade - 6 Way Hydraulic 332.X4287 $7,637
EFFECTIVE: MAY, 2013 JCB 225T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 9 of 10 JCB 225T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,444
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,055
881U532 Bale Spear 333/L5627 $821
Trenchers
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
881U522 48" Trencher with 6" wide chain, crumber and hoses - HIGH FLOW 332/X4290 $7,493
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 332/X4291 $7,095
881U524 72" Brush Cutter - HIGH FLOW 332/X4292 $7,238
881U525 78' Brush Cutter - HIGH FLOW 332/X4293 $7,569
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Tree Spades
881U602 Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter 332/X4296 $10,962
881U603 Tree Spade with Blades / 25 degree cutting angle / 24" - 36" ball diameter 332/X4297 $14,854
881U604 Tree Spade with Blades / 25 degree cutting angle / 32" - 44" ball diameter 332/X4298 $14,110
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $21,020
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $21,308
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
Saws
881U611 Rock Saw - 18" Depth - HIGH FLOW 332/L7244 $19,952
Snow Removal Attachments
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $5,093
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,239
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U665 84" Snow Blower - Standard Flow 332/X4385 $7,842
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U662 84" Snow Blower - HIGH FLOW 332/X4401 $13,622
881U670 72" Snow Push 333/L5629 $3,054
881U671 84" Snow Push 333/L5640 $3,147
881U672 96" Snow Push 333/L5646 $3,548
EFFECTIVE: MAY, 2013 JCB 225T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 10 of 10 JCB 225T Compact Tracked USD Price Page
JCB SKID STEER LOADER
260NEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
JCB 260 SKID STEER LOADER
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear, Reverse
Alarm, Horn, and 12V Accessory Socket.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Audible and visual warning systems, right and left side mounted instrument panels. Standard electronic
throttle control with optional foot throttle.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc, oil
immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically activated
through a switch on the instrument panel or by raising seat bar.
Rated Operating Capacity of 2600 lbs, Vertical Lift Loader Design provides vertical lift path and increased
reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic powered
attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic Float standard on
all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride system), left hand auxiliary
pipework.
LOADER
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner; Fuel
filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 6.8 mph in both forward and
reverse. Optional Creep speed provides operation from 0 - 1/2 of full speed for special applications. An
optional two speed transmission is available providing a low range of 0 - 6.8 mph and a high range of 0 -
12.4 mph
12 x 16.5 10 ply, Heavy Duty WIDE TRACK JCB Tires providing 72" width.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and operator restraint interlock for
drive and loader functions. Cab units are pressurized and available with heat or heat and A/C, sliding left
window and full side door. Right Hand glass standard on canopy and cab builds.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides class
leading access to engine bay and daily maintenance and check points.
All prices and specifications subject to change without notice Page 2 of 10 JCB 260 Skid Steer USD Price Page
JCB 260 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8606A 8606BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8606 JCB 260 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A302 12 X 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width)
881B309 Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
881B329
881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
881C312
881D302 GP Bucket - 72" - 15.4 cu-ft
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F306
881G025 Engine Block Heater- 110V
881G084 Foot Throttle
881G091 Vinyl Air Suspension Seat
881G094 Parallel Lift Vertical Lift Models - 260 & 280
881G073 2 Speed - Wheeled Machines
881G077 Smooth Ride System (SRS)
SUGGESTED LIST PRICE $43,599 $51,806
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required if High Flow ordered.
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 260 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8606 JCB 260 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $39,227
TIRE SETS (E) pick one
881A301 12 X 16.5 10PR HD Tires and Wheels (provides 67.9" width) $0
881A302 12 X 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width) $54
881A305 12 X 16.5 10PR Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 67.9" width) $814
881A306 12 X 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 71.7" width) $857
881A307 33/15.5 X 16.5 14PR SK Hauler High Floatation Tires and Wheels (provides 72" width) $1,018
881A308 8 X 16 Solid Industrial Tires and Wheels (provides 63" width) $1,607
881A309 12 X 16.5 Brawler Solid Flex Industrial Tires and Wheels (provides 66" width) $2,410
881A316 12 X 16.5 Slick Brawler Solid Flex Industrial $2,544
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B308 $804
881B309 $872
Cab with Heater Packages
881B318 $2,756
881B319 $2,823
Cab with Heater and A/C Packages
881B328 $4,576
881B329 $4,645
MACHINE CONTROLS (E)
881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics $1,070
881C312 $1,616
JCB 260 SKID STEER LOADER EFFECTIVE: MAY, 2013
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required if High
Flow ordered.
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch.
(Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual Lock
Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual
Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 260 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D302 GP Bucket - 72" - 15.4 cu-ft $1,043
881D341 GP Bucket - 75" - 15.8 cu-ft $1,093
881D303 GP Bucket - 78" - 16.7 cu-ft $1,135
881D304 GP Bucket - 84" - 18.1 cu-ft $1,506
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,674
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,721
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,767
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,137
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,702
881D345 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,748
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,793
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,164
Landscape Buckets
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,056
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,151
881D308 Landscape Bucket - 84" 22.7 cu-ft $1,402
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,687
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,781
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,033
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,714
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,808
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,060
6 IN 1 Buckets
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft $3,771
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,295
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,848
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,402
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,927
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,480
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,429
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,953
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,507
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 260 SKID STEER LOADER EFFECTIVE: MAY, 2013
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 260 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F306 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312) $1,232
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $889
881G079 Roadlight Kit with Brake lights for A/C machines $889
881G089 Grid Heater for Canopy builds (Starting aid) $129
881G025 Engine Block Heater- 110V $134
881G031 Rotating Beacon and Socket $140
881G076 Worklights with 2 rear lights for non A/C machines $41
881G043 White Noise Reverse Alarm $189
881G096 ISO & Dual Hand Control Pattern Changeover $558
881G099 Creep Speed $125
Loader Options
881G077 Smooth Ride System (SRS) $1,005
881G094 Parallel Lift Vertical Lift Models - 260 & 280 $514
Hydraulic Options
881G073 2 Speed - Wheeled Machines $1,517
881G021 Biodegradable Oils $305
881G102 $525
881G103 $525
881G075 Electric Quick Hitch $803
Operators Compartment Options
881G084 Foot Throttle $204
881G017 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G024 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G005 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G011 Key Start/ Key Immobilizer- All machine configurations $402
881G008 Impact Protection - Laminated Glass - for Canopy builds $536
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,692
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $857
881G107 Laminate glass to replace tempered glass as standard on cab builds ONLY - Tier 4 $124
881G071 Front Mesh Guard for canopy machines (NO front glass required) $673
881G091 Vinyl Air Suspension Seat $616
881G019 Cloth Air Suspension Seat $696
881G105 Mechanical Suspension Seat $240
881G020 3 inch Seatbelt $59
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $268
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $178
881G022 Radio with Speakers and Aerial $300
881G036 $670
881G054 Right Hand Mesh to Replace Glass as Standard $161
Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be
ordered when getting the full left side door.
U.S. DOLLAR
PRICE PAGES JCB 260 SKID STEER LOADER EFFECTIVE: MAY, 2013
Auxiliary Coupler Placement Left hand Side with 14 Pin Connector - Compatible with Multi-function Joysticks (not
compatible with High Flow)
Auxiliary Hydraulic Coupler Placement- Left Hand Side (Not compatible with High Flow Option)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 260 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED ( - do not need to order if included in operator enclosure packages)
881G012 Hardide Pivot Pins (For Severe Heavy Duty Applications) $722
881G029 Twine Cutter - wheeled machines only $134
881G083 Tool Kit - Basic $322
881G098 Tool Kit - Full $478
881G082 Reversing Fan $840
881G087 Canopy Wheeled Fender & Fuel Cap Protection $120
881G088 Cab Wheeled Fender & Fuel Cap Protection $120
APPLICATION PACKAGES
881G014 $2,009
881G015 $3,348
881G016 $3,014
881G051 $2,281
881G052 $996
881G061 $1,906
881G062 $3,240
881G063 $2,903
881G064 $2,785
881G065 $4,178
881G066 $3,851
881G070 $1,005
881G072 $514
BUCKET ACCESSORIES
881H302 Bolt on Edge For 72" Bucket (1727mm) $312
881H316 Bolt on Edge for 75" bucket (1905mm) $321
881H303 Bolt on Edge For 78" Bucket (1829mm) $330
881H304 Bolt on Edge For 84" Bucket (1981mm) $365
881H306 Tooth Bar for 72" Bucket - over Bucket (1727mm) $653
881H317 Tooth Bar for 75" bucket - over bucket (1905mm) $664
881H307 Tooth Bar for 78" Bucket - over Bucket (1829mm) $675
881H308 Tooth Bar for 84" Bucket - over Bucket (1981mm) $767
881H310 Tooth Bar for 72" Bucket - over Bolt on Edge (1727mm) $653
881H318 Tooth Bar for 75" bucket - over bolt on edge (1905mm) $664
881H311 Tooth Bar for 78" Bucket - over Bolt on Edge (1829mm) $675
881H312 Tooth Bar for 84" Bucket - over Bolt on Edge (1981mm) $767
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to
provide protection over laminated cab glass.
JCB 260 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear
Bars - Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order
G008
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order
G008
EFFECTIVE: MAY, 2013
Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass.
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear
Bars - Cab machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
A/C FOPS Guard
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear
Bars - Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Heavy Duty Rear Bars for Adverse Applications
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 260 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,176
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $1,949
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $1,817
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,120
881U217 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) 334/L5922 $438
Snow Buckets
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $1,776
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,588
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $2,952
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $2,312
881U215 Bolt on Edge for 96" Snow Bucket (2438mm) 334/L5920 $573
881U216 Bolt on Edge for 108" Snow Bucket (2743mm) 334/L5921 $510
Grapple Attachments
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,289
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,547
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,862
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,483
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $4,856
Hydraulic Brooms/Sweepers
881U248 72" Pick-Up Sweeper 334/P2836 $6,775
881U249 84" Pick-Up Sweeper 334/P2839 $7,275
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,124
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,252
881U302 Hydraulic angle kit for 72" or 84" Angle Broom 332/L3983 $1,358
Hammers
881U352 HM386Q (includes Chisel & Moil) - *881U353 Mounting Bracket required* 980/A3483 $13,145
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,829
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,970
881U401 Planetary Drive Auger - HIGH FLOW - (includes mounting bracket & hoses) 332/L3979 $5,548
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: MAY, 2013 JCB 260 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 8 of 10 JCB 260 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex $472
881U459 9" X 4' Heavy Duty Auger 2" Hex $636
881U460 12" X 4' Heavy Duty Auger 2" Hex $723
881U461 15" X 4' Heavy Duty Auger 2" Hex $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex $1,711
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" $168
881U471 Hex. Drive Extension - 18" $247
881U472 Hex. Drive Extension - 24" $328
Landscape Development Tools
881U500 72" Landscape Power Rake with Manual Angle $11,060
881U501 72" Landscape Power Rake with Hydraulic Angle $9,485
881U502 84" Landscape Power Rake with Manual Angle $13,752
881U503 84" Landscape Power Rake with Hydraulic Angle $14,918
881U504 90" Landscape Power Rake with Manual Angle $11,354
881U505 90" Landscape Power Rake with Hydraulic Angle $14,290
881U506 66' Landscape Preparator - Standard Flow $9,840
881U507 76" Landscape Preparator - Standard Flow $13,152
881U508 66" Auto Rake - Standard Flow $10,676
881U509 76" Auto Rake - Standard Flow $10,067
881U510 66" Tiller - 6 inch tines - HIGH FLOW $5,450
881U511 78" Tiller - 6 inch tines - HIGH FLOW $6,510
881U512 73" Vibratory Roller - Smooth Drum $10,018
881U513 84" Vibratory Roller - Smooth Drum $10,604
881U514 73" Vibratory Roller - Padded Drum $10,825
881U515 84" Vibratory Roller - Padded Drum $11,375
Forestry Cutters
881U516 60" Forestry Cutting Head - HIGH FLOW $26,416
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic $7,635332/X4285
332/L7237
332/L3951
332/L7247
332/L7248
332/X4282
332/L3939
332/L3960
332/L7252
332/L3954
332/L7253
980/L7251
980/L7257
332/X4284
334/L8351
980/L7271
980/L7272
332/X4283
980/A3001
980/A2031
980/A2034
332/L3947
332/X4281
332/X4380
980/A2035
980/A2037
980/A2038
332/X4381
980/L7267
980/L7273
980/L7270
JCB 260 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
EFFECTIVE: MAY, 2013
980/A2039
980/A2032
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 9 of 10 JCB 260 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,013
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,444
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,055
881U532 Bale Spear 333/L5627 $821
Trenchers
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
881U522 48" Trencher with 6" wide chain, crumber and hoses - HIGH FLOW 332/X4290 $7,493
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 332/X4291 $7,095
881U524 72" Brush Cutter - HIGH FLOW 332/X4292 $7,238
881U525 78' Brush Cutter - HIGH FLOW 332/X4293 $7,569
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $21,020
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $21,308
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
Saws
881U611 Rock Saw - 18" Depth - HIGH FLOW 332/L7244 $19,952
Snow Removal Attachments
881U650 72" Snow Blade - Manual Angle 332/X4347 $1,817
881U651 84" Snow Blade - Manual Angle 332/X4348 $1,968
881U652 96" Snow Blade - Manual Angle 332/X4349 $2,120
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,363
881U654 84" Snow Blade - Hydraulic Angle 332/X4351 $2,605
881U655 96" Snow Blade - Hydraulic Angle 332/X4352 $2,725
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $5,093
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U665 84" Snow Blower - Standard Flow 332/X4385 $7,842
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U662 84" Snow Blower - HIGH FLOW 332/X4401 $13,622
881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085
881U670 72" Snow Push 333/L5629 $3,054
EFFECTIVE: MAY, 2013 JCB 260 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 10 of 10 JCB 260 Skid Steer USD Price Page
JCB COMPACT TRACK LOADER
260TNEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
Rated Operating Capacity of 2600 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride
system), left hand auxiliary pipework.
EFFECTIVE: MAY 1, 2013 JCB 260T COMPACT TRACK LOADER
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides access
to engine bay and daily maintenance and check points.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat with
seatbelt and operator restraint interlock for drive and loader functions. Cab units
are pressurized and available with heat or heat and A/C, sliding left window and full
side door. Right Hand glass standard on canopy and cab builds.
Fitted with 17.7" wide tracks provide a machine width of 78" and a ground bearing pressure
of 4.6 psi.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 5.7 mph in both forward and
reverse. Optional Creep speed provides operation from 0 to 1/2 of full speed for special applications.
An optional two (2) speed transmission is available providing a low range of 0 - 4.8 mph and a high
range of 0 - 7.8 mph
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner. Fuel
filter with water separator, 1000 CCA battery; variable speed hydraulically driven fan.
All prices and specifications subject to change without notice Page 2 of 10 JCB 260T Compact Tracked USD Price Page
JCB 260T SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8614A 8614BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8614 JCB 260T Tracked, Vertical Lift, New Generation, Compact Tracked Loader
881A322 17.7 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 78"
881B339 Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
881B359
881C311
881C312
881D303
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F306
881G025
881G084 Foot Throttle
881G097 Parallel Lift Vertical Lift Model - 260T
881G074 2 Speed - Tracked Machines
881G077 Smooth Ride System (SRS)
SUGGESTED LIST PRICE $57,663 $65,870
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required if High Flow ordered.
GP Bucket - 78" - 16.7 cu-ft
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Engine Block Heater- 110V
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 260T Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8614 JCB 260T Tracked, Vertical Lift, New Generation, Compact Tracked Loader $53,065
TRACKS (E)
881A321 12.6 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 73" In Base
881A322 17.7 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 78" $803
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B338 $804
881B339 $872
Cab with Heater Packages
881B348 $2,756
881B349 $2,823
Cab with Heater and A/C Packages
881B358 $4,576
881B359 $4,645
MACHINE CONTROLS (E)
881C311 $1,070
881C312 $1,616
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB 260T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required if High
Flow ordered.
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch.
(Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual Lock
Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual
Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 260T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D303 GP Bucket - 78" - 16.7 cu-ft $1,135
881D304 GP Bucket - 84" - 18.1 cu-ft $1,506
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,767
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,137
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,793
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,164
Landscape Buckets
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,151
881D308 Landscape Bucket - 84" 22.7 cu-ft $1,402
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,781
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,033
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,808
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,060
6 IN 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,295
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,848
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,927
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,480
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,953
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,507
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 260T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 260T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F306 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312) $1,232
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $889
881G079 Roadlight Kit with Brake lights for A/C machines $889
881G089 Grid Heater for Canopy builds (Starting aid) $129
881G025 Engine Block Heater- 110V $134
881G031 Rotating Beacon and Socket $140
881G076 Worklights with 2 rear lights for non A/C machines $41
881G043 White Noise Reverse Alarm $189
881G096 ISO & Dual Hand Control Pattern Changeover $558
881G099 Creep Speed $125
Loader Options
881G077 Smooth Ride System (SRS) $1,005
881G097 Parallel Lift Vertical Lift Model - 260T $514
Hydraulic Options
881G074 2 Speed - Tracked Machines $1,517
881G021 Biodegradable Oils $305
881G102 $525
881G103 $525
881G075 Electric Quick Hitch $803
Operators Compartment Options
881G084 Foot Throttle $204
881G017 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G024 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G005 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G011 Key Start/ Key Immobilizer- All machine configurations $402
881G008 Impact Protection - Laminated Glass - for Canopy builds $536
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,692
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $857
881G107 Laminate glass to replace tempered glass as standard on cab builds ONLY - Tier 4 $124
881G071 Front Mesh Guard for canopy machines (NO front glass required) $673
881G091 Vinyl Air Suspension Seat $616
881G019 Cloth Air Suspension Seat $696
881G020 3 inch Seatbelt $59
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $268
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $178
881G022 Radio with Speakers and Aerial $300
881G037 $569
881G054 Right Hand Mesh to Replace Glass as Standard $161
Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side door.
U.S. DOLLAR
PRICE PAGES JCB 260T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
Auxiliary Coupler Placement Left hand Side with 14 Pin Connector - Compatible with Multi-function Joysticks (not compatible with High Flow)
Auxiliary Hydraulic Coupler Placement- Left Hand Side (Not compatible with High Flow Option)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 260T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
881G012 Hardide Pivot Pins (For Severe Heavy Duty Applications) $722
881G083 Tool Kit - Basic $322
881G098 Tool Kit - Full $478
881G082 Reversing Fan $840
881G100 Canopy Tracked Fender & Fuel Cap Protection $120
881G101 Cab Tracked Fender & Fuel Cap Protection $120
APPLICATION PACKAGES
881G014 $2,009
881G015 $3,348
881G016 $3,014
881G051 $2,281
881G052 $996
881G061 $1,906
881G062 $3,240
881G063 $2,903
881G064 $2,785
881G065 $4,178
881G066 $3,851
881G070 $1,005
881G072 $514
BUCKET ACCESSORIES
881H303 Bolt on Edge For 78" Bucket (1829mm) $330
881H304 Bolt on Edge For 84" Bucket (1981mm) $365
881H307 Tooth Bar for 78" Bucket - over Bucket (1829mm) $675
881H308 Tooth Bar for 84" Bucket - over Bucket (1981mm) $767
881H311 Tooth Bar for 78" Bucket - over Bolt on Edge (1829mm) $675
881H312 Tooth Bar for 84" Bucket - over Bolt on Edge (1981mm) $767
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab
machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated
cab glass.
A/C FOPS Guard
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Heavy Duty Rear Bars for Adverse Applications
JCB 260T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars -
Canopy machines must order G008
EFFECTIVE: MAY, 2013
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 260T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $1,949
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $1,817
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,120
881U217 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) 334/L5922 $438
Snow Buckets
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $1,776
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,588
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $2,952
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $2,312
881U215 Bolt on Edge for 96" Snow Bucket (2438mm) 334/L5920 $573
881U216 Bolt on Edge for 108" Snow Bucket (2743mm) 334/L5921 $510
Grapple Attachments
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,547
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,862
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $4,856
Hydraulic Brooms/Sweepers
881U248 72" Pick-Up Sweeper 334/P2836 $6,775
881U249 84" Pick-Up Sweeper 334/P2839 $7,275
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,124
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,252
881U302 Hydraulic angle kit for 72" or 84" Angle Broom 332/L3983 $1,358
Hammers
881U352 HM386Q (includes Chisel & Moil) - *881U353 Mounting Bracket required* 980/A3483 $13,145
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,829
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,970
881U401 Planetary Drive Auger - HIGH FLOW - (includes mounting bracket & hoses) 332/L3979 $5,548
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: MAY, 2013 JCB 260T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 8 of 10 JCB 260T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,711
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,060
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $9,485
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,752
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,918
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $11,354
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,290
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $9,840
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,152
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,067
881U510 66" Tiller - 6 inch tines - HIGH FLOW 332/X4380 $5,450
881U511 78" Tiller - 6 inch tines - HIGH FLOW 332/X4381 $6,510
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,018
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,604
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $10,825
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,375
Forestry Cutters
881U516 60" Forestry Cutting Head - HIGH FLOW 334/L8351 $26,416
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,635
881U519 96" Dozer Blade - 6 Way Hydraulic 332.X4287 $7,637
EFFECTIVE: MAY, 2013 JCB 260T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 9 of 10 JCB 260T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,444
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,055
881U532 Bale Spear 333/L5627 $821
Trenchers
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
881U522 48" Trencher with 6" wide chain, crumber and hoses - HIGH FLOW 332/X4290 $7,493
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 332/X4291 $7,095
881U524 72" Brush Cutter - HIGH FLOW 332/X4292 $7,238
881U525 78' Brush Cutter - HIGH FLOW 332/X4293 $7,569
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Tree Spades
881U602 Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter 332/X4296 $10,962
881U603 Tree Spade with Blades / 25 degree cutting angle / 24" - 36" ball diameter 332/X4297 $14,854
881U604 Tree Spade with Blades / 25 degree cutting angle / 32" - 44" ball diameter 332/X4298 $14,110
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $21,020
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $21,308
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
Saws
881U611 Rock Saw - 18" Depth - HIGH FLOW 332/L7244 $19,952
Snow Removal Attachments
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $5,093
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,239
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U665 84" Snow Blower - Standard Flow 332/X4385 $7,842
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U662 84" Snow Blower - HIGH FLOW 332/X4401 $13,622
881U670 72" Snow Push 333/L5629 $3,054
881U671 84" Snow Push 333/L5640 $3,147
881U672 96" Snow Push 333/L5646 $3,548
EFFECTIVE: MAY, 2013 JCB 260T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 10 of 10 JCB 260T Compact Tracked USD Price Page
JCB SKID STEER LOADER
280NEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front
and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
12 x 16.5 10 ply, Heavy Duty WIDE TRACK JCB Tires providing 72" width.
LOADER Rated Operating Capacity of 2800 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride
system), left hand auxiliary pipework.
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 6.8 mph in both forward and
reverse. Optional Creep speed provides operation from 0 to 1/2 of full speed for special applications.
An optional two (2) speed transmission is available providing a low range of 0 - 6.8 mph and a high
range of 0 - 12.4 mph
SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and operator
restraint interlock for drive and loader functions. Cab units are pressurized and
available with heat or heat and A/C, sliding left window and full side door. Right
Hand glass standard on canopy and cab builds.
Cab tilts forward to provide further access to the hydraulic components. Rear door
provides class leading access to engine bay and daily maintenance and check points.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage
air cleaner; Fuel filter with water separator; 1000 CCA battery; variable speed
hydraulically driven fan.
JCB 280 SKID STEER LOADER EFFECTIVE: MAY 1, 2013
All prices and specifications subject to change without notice Page 2 of 10 JCB 280 Skid Steer USD Price Page
JCB 280 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8607A 8607BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8607 JCB 280 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A302 12 X 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width)
881B309 Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
881B329
881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
881C312
881D302 GP Bucket - 72" - 15.4 cu-ft
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F306
881G025 Engine Block Heater- 110V
881G084 Foot Throttle
881G091 Vinyl Air Suspension Seat
881G094 Parallel Lift Vertical Lift Models - 260 & 280
881G073 2 Speed - Wheeled Machines
881G077 Smooth Ride System (SRS)
SUGGESTED LIST PRICE $44,629 $52,836
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required if High Flow ordered.
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not
meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 280 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8607 JCB 280 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $40,257
TIRE SETS (E) pick one
881A301 12 X 16.5 10PR HD Tires and Wheels (provides 67.9" width) $0
881A302 12 X 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width) $54
881A305 12 X 16.5 10PR Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 67.9" width) $814
881A306 12 X 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 71.7" width) $857
881A307 33/15.5 X 16.5 14PR SK Hauler High Floatation Tires and Wheels (provides 72" width) $1,018
881A308 8 X 16 Solid Industrial Tires and Wheels (provides 63" width) $1,607
881A309 12 X 16.5 Brawler Solid Flex Industrial Tires and Wheels (provides 66" width) $2,410
881A316 12 X 16.5 Slick Brawler Solid Flex Industrial $2,544
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B308 $804
881B309 $872
Cab with Heater Packages
881B318 $2,756
881B319 $2,823
Cab with Heater and A/C Packages
881B328 $4,576
881B329 $4,645
MACHINE CONTROLS (E)
881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics $1,070
881C312 $1,616
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual
Lock Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB 280 SKID STEER LOADER EFFECTIVE: MAY, 2013
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required if High Flow ordered.
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual
Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and
Roadlights)
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a
Manual Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and
Roadlights)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 280 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D302 GP Bucket - 72" - 15.4 cu-ft $1,043
881D341 GP Bucket - 75" - 15.8 cu-ft $1,093
881D303 GP Bucket - 78" - 16.7 cu-ft $1,135
881D304 GP Bucket - 84" - 18.1 cu-ft $1,506
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,674
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,721
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,767
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,137
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,702
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,721
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,793
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,164
Landscape Buckets
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,056
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,151
881D308 Landscape Bucket - 84" 22.7 cu-ft $1,402
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,687
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,781
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,033
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,714
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,808
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,060
6 in 1 Buckets
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft $3,771
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,295
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,848
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,402
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,927
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,480
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,429
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,953
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,507
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 280 SKID STEER LOADER EFFECTIVE: MAY, 2013
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 280 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F306 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312) $1,232
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $889
881G079 Roadlight Kit with Brake lights for A/C machines $889
881G089 Grid Heater for Canopy builds (Starting aid) $129
881G025 Engine Block Heater- 110V $134
881G031 Rotating Beacon and Socket $140
881G076 Worklights with 2 rear lights for non A/C machines $41
881G043 White Noise Reverse Alarm $189
881G096 ISO & Dual Hand Control Pattern Changeover $558
881G099 Creep Speed $125
Loader Options
881G077 Smooth Ride System (SRS) $1,005
881G094 Parallel Lift Vertical Lift Models - 260 & 280 $514
Hydraulic Options
881G073 2 Speed - Wheeled Machines $1,517
881G021 Biodegradable Oils $305
881G102 $525
881G103 $525
881G075 Electric Quick Hitch $803
Operators Compartment Options
881G084 Foot Throttle $204
881G017 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G024 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G005 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G011 Key Start/ Key Immobilizer- All machine configurations $402
881G008 Impact Protection - Laminated Glass - for Canopy builds $536
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,692
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $857
881G107 Laminate glass to replace tempered glass as standard on cab builds ONLY - Tier 4 $124
881G071 Front Mesh Guard for canopy machines (NO front glass required) $673
881G091 Vinyl Air Suspension Seat $616
881G019 Cloth Air Suspension Seat $696
881G105 Mechanical Suspension Seat $240
881G020 3 inch Seatbelt $59
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $268
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $178
881G022 Radio with Speakers and Aerial $300
881G036 $670
881G054 Right Hand Mesh to Replace Glass as Standard $161
Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left
side door.
Auxiliary Coupler Placement Left hand Side with 14 Pin Connector - Compatible with Multi-function Joysticks (not compatible with High Flow)
Auxiliary Hydraulic Coupler Placement- Left Hand Side (Not compatible with High Flow Option)
U.S. DOLLAR
PRICE PAGES JCB 280 SKID STEER LOADER EFFECTIVE: MAY, 2013
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 280 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
Other Options
881G012 Hardide Pivot Pins (For Severe Heavy Duty Applications) $722
881G029 Twine Cutter - wheeled machines only $134
881G083 Tool Kit - Basic $322
881G098 Tool Kit - Full $478
881G082 Reversing Fan $840
881G087 Canopy Wheeled Fender & Fuel Cap Protection $120
881G088 Cab Wheeled Fender & Fuel Cap Protection $120
APPLICATION PACKAGES
881G014 $2,009
881G015 $3,348
881G016 $3,014
881G051 $2,281
881G052 $996
881G061 $1,906
881G062 $3,240
881G063 $2,903
881G064 $2,785
881G065 $4,178
881G066 $3,851
881G070 $1,005
881G072 $514
BUCKET ACCESSORIES
881H302 Bolt on Edge For 72" Bucket (1727mm) $312
881H316 Bolt on Edge for 75" bucket (1905mm) $321
881H303 Bolt on Edge For 78" Bucket (1829mm) $330
881H304 Bolt on Edge For 84" Bucket (1981mm) $365
881H306 Tooth Bar for 72" Bucket - over Bucket (1727mm) $653
881H317 Tooth Bar for 75" bucket - over bucket (1905mm) $664
881H307 Tooth Bar for 78" Bucket - over Bucket (1829mm) $675
881H308 Tooth Bar for 84" Bucket - over Bucket (1981mm) $767
881H310 Tooth Bar for 72" Bucket - over Bolt on Edge (1727mm) $653
881H318 Tooth Bar for 75" bucket - over bolt on edge (1905mm) $664
881H311 Tooth Bar for 78" Bucket - over Bolt on Edge (1829mm) $675
881H312 Tooth Bar for 84" Bucket - over Bolt on Edge (1981mm) $767
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Cab machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass.
A/C FOPS Guard
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Heavy Duty Rear Bars for Adverse Applications
JCB 280 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars -
Canopy machines must order G008
EFFECTIVE: MAY, 2013
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 280 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,176
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $1,949
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $1,817
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,120
881U217 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) 334/L5922 $438
Snow Buckets
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $1,776
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,588
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $2,952
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $2,312
881U215 Bolt on Edge for 96" Snow Bucket (2438mm) 334/L5920 $573
881U216 Bolt on Edge for 108" Snow Bucket (2743mm) 334/L5921 $510
Grapple Attachments
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,289
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,547
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,862
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,483
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $4,856
Hydraulic Brooms/Sweepers
881U248 72" Pick-Up Sweeper 334/P2836 $6,775
881U249 84" Pick-Up Sweeper 334/P2839 $7,275
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,124
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,252
881U302 Hydraulic angle kit for 72" or 84" Angle Broom 332/L3983 $1,358
Hammers
881U352 HM386Q (includes Chisel & Moil) - *881U353 Mounting Bracket required* 980/A3483 $13,145
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,829
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,970
881U401 Planetary Drive Auger - HIGH FLOW - (includes mounting bracket & hoses) 332/L3979 $5,548
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: MAY, 2013 JCB 280 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 8 of 10 JCB 280 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,711
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,060
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $9,485
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,752
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,918
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $11,354
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,290
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $9,840
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,152
881U508 66" Auto Rake - Standard Flow 332/L7253 $10,676
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,067
881U510 66" Tiller - 6 inch tines - HIGH FLOW 332/X4380 $5,450
881U511 78" Tiller - 6 inch tines - HIGH FLOW 332/X4381 $6,510
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,018
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,604
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $10,825
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,375
Forestry Cutters
881U516 60" Forestry Cutting Head - HIGH FLOW 334/L8351 $26,416
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,635
EFFECTIVE: MAY, 2013 JCB 280 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 9 of 10 JCB 280 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,013
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,444
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,055
881U532 Bale Spear 333/L5627 $821
Trenchers
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
881U522 48" Trencher with 6" wide chain, crumber and hoses - HIGH FLOW 332/X4290 $7,493
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 332/X4291 $7,095
881U524 72" Brush Cutter - HIGH FLOW 332/X4292 $7,238
881U525 78' Brush Cutter - HIGH FLOW 332/X4293 $7,569
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $21,020
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $21,308
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4301 $23,313
Saws
881U611 Rock Saw - 18" Depth - HIGH FLOW 332/L7244 $19,952
Snow Removal Attachments
881U650 72" Snow Blade - Manual Angle 332/X4347 $1,817
881U651 84" Snow Blade - Manual Angle 332/X4348 $1,968
881U652 96" Snow Blade - Manual Angle 332/X4349 $2,120
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,363
881U654 84" Snow Blade - Hydraulic Angle 332/X4351 $2,605
881U655 96" Snow Blade - Hydraulic Angle 332/X4352 $2,725
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $5,093
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U665 84" Snow Blower - Standard Flow 332/X4385 $7,842
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U662 84" Snow Blower - HIGH FLOW 332/X4401 $13,622
881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085
881U670 72" Snow Push 333/L5629 $3,054
EFFECTIVE: MAY, 2013 JCB 280 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 10 of 10 JCB 280 Skid Steer USD Price Page
JCB SKID STEER LOADER
300NEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 6.8 mph in both forward and
reverse. Optional Creep speed provides operation from 0 to 1/2 of full speed for special applications.
An optional two (2) speed transmission is available providing a low range of 0 - 6.8 mph and a high
range of 0 - 12.4 mph
Cab tilts forward to provide further access to the hydraulic components. Rear door
provides class leading access to engine bay and daily maintenance and check points.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front
and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.
LOADER Rated Operating Capacity of 3000 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride
system), left hand auxiliary pipework.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner; Fuel
filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.
SAE certified ROPS/FOPS, left side entry. Vinyls seat with seatbelt and operator
restraint interlock for drive and loader functions. Cab units are pressurized and
available with heat or heat and A/C, sliding left window and full side door. Right
Hand glass standard on canopy and cab builds.
12 x 16.5 10 ply, Heavy Duty WIDE TRACK JCB Tires providing 72" width.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
EFFECTIVE: MAY 1, 2013 JCB 300 SKID STEER LOADER
All prices and specifications subject to change without notice Page 2 of 10 JCB 300 Skid Steer USD Price Page
JCB 300 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8608A 8608BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8608 JCB 300 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A302 12 X 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width)
881B309 Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
881B329
881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
881C312
881D302 GP Bucket - 72" - 15.4 cu-ft
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F310
881G025 Engine Block Heater- 110V
881G084 Foot Throttle
881G091 Vinyl Air Suspension Seat
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T, 320T
881G073 2 Speed - Wheeled Machines
881G077 Smooth Ride System (SRS)
SUGGESTED LIST PRICE $50,342 $58,549
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required if High Flow ordered.
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not
meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 300 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8608 JCB 300 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $45,970
TIRE SETS (E) pick one
881A301 12 X 16.5 10PR HD Tires and Wheels (provides 67.9" width) $0
881A302 12 X 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width) $54
881A305 12 X 16.5 10PR Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 67.9" width) $814
881A306 12 X 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 71.7" width) $857
881A307 33/15.5 X 16.5 14PR SK Hauler High Floatation Tires and Wheels (provides 72" width) $1,018
881A308 8 X 16 Solid Industrial Tires and Wheels (provides 63" width) $1,607
881A309 12 X 16.5 Brawler Solid Flex Industrial Tires and Wheels (provides 66" width) $2,410
881A316 12 X 16.5 Slick Brawler Solid Flex Industrial $2,544
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B308 $804
881B309 $872
Cab with Heater Packages
881B318 $2,756
881B319 $2,823
Cab with Heater and A/C Packages
881B328 $4,576
881B329 $4,645
MACHINE CONTROLS (E)
881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics $1,070
881C312 $1,616
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB 300 SKID STEER LOADER EFFECTIVE: MAY, 2013
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required if High
Flow ordered.
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch.
(Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual Lock
Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual
Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 300 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D302 GP Bucket - 72" - 15.4 cu-ft $1,043
881D341 GP Bucket - 75" - 15.8 cu-ft $1,093
881D303 GP Bucket - 78" - 16.7 cu-ft $1,135
881D304 GP Bucket - 84" - 18.1 cu-ft $1,506
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,674
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,721
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,767
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,137
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,702
881D345 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,748
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,793
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,164
Landscape Buckets
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,056
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,151
881D308 Landscape Bucket - 84" 22.7 cu-ft $1,402
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,687
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,781
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,033
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,714
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,808
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,060
6 IN 1 Buckets
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft $3,771
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,295
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,848
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,402
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,927
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,480
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,429
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,953
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,507
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 300 SKID STEER LOADER EFFECTIVE: MAY, 2013
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 300 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F310 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312) $1,232
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $889
881G079 Roadlight Kit with Brake lights for A/C machines $889
881G089 Grid Heater for Canopy builds (Starting aid) $129
881G025 Engine Block Heater- 110V $134
881G031 Rotating Beacon and Socket $140
881G076 Worklights with 2 rear lights for non A/C machines $41
881G043 White Noise Reverse Alarm $189
881G096 ISO & Dual Hand Control Pattern Changeover $558
881G099 Creep Speed $125
Loader Options
881G077 Smooth Ride System (SRS) $1,005
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T, 320T $514
Hydraulic Options
881G073 2 Speed - Wheeled Machines $1,517
881G021 Biodegradable Oils $305
881G102 $525
881G103 $525
881G075 Electric Quick Hitch $803
Operators Compartment Options
881G084 Foot Throttle $204
881G017 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G024 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G005 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G011 Key Start/ Key Immobilizer- All machine configurations $402
881G008 Impact Protection - Laminated Glass - for Canopy builds $536
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,692
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $857
881G107 Laminate glass to replace tempered glass as standard on cab builds ONLY - Tier 4 $124
881G071 Front Mesh Guard for canopy machines (NO front glass required) $673
881G091 Vinyl Air Suspension Seat $616
881G019 Cloth Air Suspension Seat $696
881G105 Mechanical Suspension Seat $240
881G020 3 inch Seatbelt $59
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $268
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $178
881G022 Radio with Speakers and Aerial $300
881G036 $670
881G054 Right Hand Mesh to Replace Glass as Standard $161
Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full
left side door.
Auxiliary Coupler Placement Left hand Side with 14 Pin Connector - Compatible with Multi-function Joysticks (not compatible with High Flow)
Auxiliary Hydraulic Coupler Placement- Left Hand Side (Not compatible with High Flow Option)
U.S. DOLLAR
PRICE PAGES JCB 300 SKID STEER LOADER EFFECTIVE: MAY, 2013
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 300 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
881G012 Hardide Pivot Pins (For Severe Heavy Duty Applications) $722
881G029 Twine Cutter - wheeled machines only $134
881G083 Tool Kit - Basic $322
881G098 Tool Kit - Full $478
881G082 Reversing Fan $840
881G087 Canopy Wheeled Fender & Fuel Cap Protection $120
881G088 Cab Wheeled Fender & Fuel Cap Protection $120
APPLICATION PACKAGES
881G014 $2,009
881G015 $3,348
881G016 $3,014
881G051 $2,281
881G052 $996
881G061 $1,906
881G062 $3,240
881G063 $2,903
881G064 $2,785
881G065 $4,178
881G066 $3,851
881G070 $1,005
881G072 $514
BUCKET ACCESSORIES
881H302 Bolt on Edge For 72" Bucket (1727mm) $312
881H316 Bolt on Edge for 75" bucket (1905mm) $321
881H303 Bolt on Edge For 78" Bucket (1829mm) $330
881H304 Bolt on Edge For 84" Bucket (1981mm) $365
881H306 Tooth Bar for 72" Bucket - over Bucket (1727mm) $653
881H317 Tooth Bar for 75" bucket - over bucket (1905mm) $664
881H307 Tooth Bar for 78" Bucket - over Bucket (1829mm) $675
881H308 Tooth Bar for 84" Bucket - over Bucket (1981mm) $767
881H310 Tooth Bar for 72" Bucket - over Bolt on Edge (1727mm) $653
881H318 Tooth Bar for 75" bucket - over bolt on edge (1905mm) $664
881H311 Tooth Bar for 78" Bucket - over Bolt on Edge (1829mm) $675
881H312 Tooth Bar for 84" Bucket - over Bolt on Edge (1981mm) $767
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Cab machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass.
A/C FOPS Guard
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Heavy Duty Rear Bars for Adverse Applications
JCB 300 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars -
Canopy machines must order G008
EFFECTIVE: MAY, 2013
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 300 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,176
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $1,949
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $1,817
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,120
881U217 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) 334/L5922 $438
Snow Buckets
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $1,776
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,588
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $2,952
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $2,312
881U215 Bolt on Edge for 96" Snow Bucket (2438mm) 334/L5920 $573
881U216 Bolt on Edge for 108" Snow Bucket (2743mm) 334/L5921 $510
Grapple Attachments
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,289
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,547
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,862
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,483
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $4,856
Hydraulic Brooms/Sweepers
881U248 72" Pick-Up Sweeper 334/P2836 $6,775
881U249 84" Pick-Up Sweeper 334/P2839 $7,275
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,124
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,252
881U302 Hydraulic angle kit for 72" or 84" Angle Broom 332/L3983 $1,358
Hammers
881U352 HM386Q (includes Chisel & Moil) - *881U353 Mounting Bracket required* 980/A3483 $13,145
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,829
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,970
881U401 Planetary Drive Auger - HIGH FLOW - (includes mounting bracket & hoses) 332/L3979 $5,548
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: MAY, 2013 JCB 300 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 8 of 10 JCB 300 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,711
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,060
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $9,485
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,752
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,918
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $11,354
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,290
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $9,840
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,152
881U508 66" Auto Rake - Standard Flow 332/L7253 $10,676
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,067
881U510 66" Tiller - 6 inch tines - HIGH FLOW 332/X4380 $5,450
881U511 78" Tiller - 6 inch tines - HIGH FLOW 332/X4381 $6,510
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,018
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,604
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $10,825
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,375
Forestry Cutters
881U516 60" Forestry Cutting Head - HIGH FLOW 334/L8351 $26,416
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,635
881U519 96" Dozer Blade - 6 Way Hydraulic 332.X4287 $7,637
EFFECTIVE: MAY, 2013 JCB 300 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 9 of 10 JCB 300 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,013
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,444
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,055
881U532 Bale Spear 333/L5627 $821
Trenchers
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
881U522 48" Trencher with 6" wide chain, crumber and hoses - HIGH FLOW 332/X4290 $7,493
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 332/X4291 $7,095
881U524 72" Brush Cutter - HIGH FLOW 332/X4292 $7,238
881U525 78' Brush Cutter - HIGH FLOW 332/X4293 $7,569
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $21,020
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $21,308
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4301 $23,313
Saws
881U611 Rock Saw - 18" Depth - HIGH FLOW 332/L7244 $19,952
881U612 Rock Saw - 24" Depth - HIGH FLOW 332/L7269 $22,136
Snow Removal Attachments
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $5,093
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,239
881U658 120" Heavy Duty Snow Blade - Hydraulic Angle 332/L3932 $4,693
881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U665 84" Snow Blower - Standard Flow 332/X4385 $7,842
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U662 84" Snow Blower - HIGH FLOW 332/X4401 $13,622
881U670 72" Snow Push 333/L5629 $3,054
EFFECTIVE: MAY, 2013 JCB 300 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 10 of 10 JCB 300 Skid Steer USD Price Page
JCB COMPACT TRACK LOADER
300TNEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
JCB 300T COMPACT TRACK LOADER
SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat with
seatbelt and operator restraint interlock for drive and loader functions. Cab units
are pressurized and available with heat or heat and A/C, sliding left window and full
side door. Right Hand glass standard on canopy and cab builds.
EFFECTIVE: MAY 1, 2013
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 5.7 mph in both forward and
reverse. Optional Creep speed provides operation from 0 to 1/2 of full speed for special applications.
An optional two (2) speed transmission is available providing a low range of 0 - 4.8 mph and a high
range of 0 - 7.8 mph
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage
air cleaner. Fuel filter with water separator, 1000 CCA battery; variable speed
hydraulically driven fan.
Fitted with 17.7" wide tracks provide a machine width of 78" and a ground bearing pressure of 4.8 psi.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides access
to engine bay and daily maintenance and check points.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Rated Operating Capacity of 3000 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride
system), left hand auxiliary pipework.
All prices and specifications subject to change without notice Page 2 of 10 JCB 300T Compact Tracked USD Price Page
JCB 300T SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8615A 8615BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8615 JCB 300T Tracked, Vertical Lift, New Generation, Compact Tracked Loader
881A322 17.7 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 78"
881B339 Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
881B359
881C311
881C312
881D303
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F310
881G025
881G084 Foot Throttle
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T, 320T
881G074 2 Speed - Tracked Machines
881G077 Smooth Ride System (SRS)
SUGGESTED LIST PRICE $65,861 $74,068
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required if High Flow ordered.
GP Bucket - 78" - 16.7 cu-ft
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Engine Block Heater- 110V
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 300T Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8615 JCB 300T Tracked, Vertical Lift, New Generation, Compact Tracked Loader $61,263
TRACKS (E)
881A322 17.7 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 78" $803
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B338 $804
881B339 $872
Cab with Heater Packages
881B348 $2,756
881B349 $2,823
Cab with Heater and A/C Packages
881B358 $4,576
881B359 $4,645
MACHINE CONTROLS (E)
881C311 $1,070
881C312 $1,616
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB 300T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required if High
Flow ordered.
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch.
(Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual Lock
Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual
Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 300T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D303 GP Bucket - 78" - 16.7 cu-ft $1,135
881D304 GP Bucket - 84" - 18.1 cu-ft $1,506
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,767
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,137
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,793
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,164
Landscape Buckets
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,151
881D308 Landscape Bucket - 84" 22.7 cu-ft $1,402
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,781
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,033
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,808
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,060
6 in 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,295
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,848
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,927
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,480
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,953
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,507
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 300T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 300T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F310 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312) $1,232
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $889
881G079 Roadlight Kit with Brake lights for A/C machines $889
881G089 Grid Heater for Canopy builds (Starting aid) $129
881G025 Engine Block Heater- 110V $134
881G031 Rotating Beacon and Socket $140
881G076 Worklights with 2 rear lights for non A/C machines $41
881G043 White Noise Reverse Alarm $189
881G096 ISO & Dual Hand Control Pattern Changeover $558
881G099 Creep Speed $125
Loader Options
881G077 Smooth Ride System (SRS) $1,005
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T, 320T $514
Hydraulic Options
881G074 2 Speed - Tracked Machines $1,517
881G021 Biodegradable Oils $305
881G102 $525
881G103 $525
881G075 Electric Quick Hitch $803
Operators Compartment Options
881G084 Foot Throttle $204
881G017 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G024 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G005 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G011 Key Start/ Key Immobilizer- All machine configurations $402
881G008 Impact Protection - Laminated Glass - for Canopy builds $536
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,692
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $857
881G107 Laminate glass to replace tempered glass as standard on cab builds ONLY - Tier 4 $124
881G071 Front Mesh Guard for canopy machines (NO front glass required) $673
881G091 Vinyl Air Suspension Seat $616
881G019 Cloth Air Suspension Seat $696
881G020 3 inch Seatbelt $59
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $268
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $178
881G022 Radio with Speakers and Aerial $300
881G037 $569
881G054 Right Hand Mesh to Replace Glass as Standard $161
Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left
side door.
U.S. DOLLAR
PRICE PAGES JCB 300T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
Auxiliary Hydraulic Coupler Placement- Left Hand Side (Not compatible with High Flow Option)
Auxiliary Coupler Placement Left hand Side with 14 Pin Connector - Compatible with Multi-function Joysticks (not compatible with High Flow)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 300T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
881G012 Hardide Pivot Pins (For Severe Heavy Duty Applications) $722
881G083 Tool Kit - Basic $322
881G098 Tool Kit - Full $478
881G082 Reversing Fan $840
881G100 Canopy Tracked Fender & Fuel Cap Protection $120
881G101 Cab Tracked Fender & Fuel Cap Protection $120
APPLICATION PACKAGES
881G014 $2,009
881G015 $3,348
881G016 $3,014
881G051 $2,281
881G052 $996
881G061 $1,906
881G062 $3,240
881G063 $2,903
881G064 $2,785
881G065 $4,178
881G066 $3,851
881G070 $1,005
881G072 $514
BUCKET ACCESSORIES
881H303 Bolt on Edge For 78" Bucket (1829mm) $330
881H304 Bolt on Edge For 84" Bucket (1981mm) $365
881H307 Tooth Bar for 78" Bucket - over Bucket (1829mm) $675
881H308 Tooth Bar for 84" Bucket - over Bucket (1981mm) $767
881H311 Tooth Bar for 78" Bucket - over Bolt on Edge (1829mm) $675
881H312 Tooth Bar for 84" Bucket - over Bolt on Edge (1981mm) $767
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
A/C FOPS Guard
JCB 300T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars -
Canopy machines must order G008
EFFECTIVE: MAY, 2013
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008
Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated
cab glass.
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab
machines only
Heavy Duty Rear Bars for Adverse Applications
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Canopy machines only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 300T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $1,949
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $1,817
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,120
881U217 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) 334/L5922 $438
Snow Buckets
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $1,776
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,588
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $2,952
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $2,312
881U215 Bolt on Edge for 96" Snow Bucket (2438mm) 334/L5920 $573
881U216 Bolt on Edge for 108" Snow Bucket (2743mm) 334/L5921 $510
Grapple Attachments
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,547
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,862
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $4,856
Hydraulic Brooms/Sweepers
881U248 72" Pick-Up Sweeper 334/P2836 $6,775
881U249 84" Pick-Up Sweeper 334/P2839 $7,275
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,124
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,252
881U302 Hydraulic angle kit for 72" or 84" Angle Broom 332/L3983 $1,358
Hammers
881U352 HM386Q (includes Chisel & Moil) - *881U353 Mounting Bracket required* 980/A3483 $13,145
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,829
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,970
881U401 Planetary Drive Auger - HIGH FLOW - (includes mounting bracket & hoses) 332/L3979 $5,548
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: MAY, 2013 JCB 300T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 8 of 10 JCB 300T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,711
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,060
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $9,485
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,752
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,918
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $11,354
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,290
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $9,840
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,152
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,067
881U510 66" Tiller - 6 inch tines - HIGH FLOW 332/X4380 $5,450
881U511 78" Tiller - 6 inch tines - HIGH FLOW 332/X4381 $6,510
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,018
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,604
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $10,825
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,375
Forestry Cutters
881U516 60" Forestry Cutting Head - HIGH FLOW 334/L8351 $26,416
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,635
881U519 96" Dozer Blade - 6 Way Hydraulic 332.X4287 $7,637
EFFECTIVE: MAY, 2013 JCB 300T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 9 of 10 JCB 300T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,444
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,055
881U532 Bale Spear 333/L5627 $821
Trenchers
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
881U522 48" Trencher with 6" wide chain, crumber and hoses - HIGH FLOW 332/X4290 $7,493
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 332/X4291 $7,095
881U524 72" Brush Cutter - HIGH FLOW 332/X4292 $7,238
881U525 78' Brush Cutter - HIGH FLOW 332/X4293 $7,569
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Tree Spades
881U602 Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter 332/X4296 $10,962
881U603 Tree Spade with Blades / 25 degree cutting angle / 24" - 36" ball diameter 332/X4297 $14,854
881U604 Tree Spade with Blades / 25 degree cutting angle / 32" - 44" ball diameter 332/X4298 $14,110
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $21,020
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $21,308
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4301 $23,313
Saws
881U611 Rock Saw - 18" Depth - HIGH FLOW 332/L7244 $19,952
881U612 Rock Saw - 24" Depth - HIGH FLOW 332/L7269 $22,136
Snow Removal Attachments
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $5,093
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,239
881U658 120" Heavy Duty Snow Blade - Hydraulic Angle 332/L3932 $4,693
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U665 84" Snow Blower - Standard Flow 332/X4385 $7,842
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U662 84" Snow Blower - HIGH FLOW 332/X4401 $13,622
881U670 72" Snow Push 333/L5629 $3,054
881U671 84" Snow Push 333/L5640 $3,147
881U672 96" Snow Push 333/L5646 $3,548
EFFECTIVE: MAY, 2013 JCB 300T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 10 of 10 JCB 300T Compact Tracked USD Price Page
JCB COMPACT TRACK LOADER
320TNEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
JCB 320T COMPACT TRACK LOADER
SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat with
seatbelt and operator restraint interlock for drive and loader functions. Cab units
are pressurized and available with heat or heat and A/C, sliding left window and full
side door. Right Hand glass standard on canopy and cab builds.
EFFECTIVE: MAY 1, 2013
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 5.7 mph in both forward and
reverse. Optional Creep speed provides operation from 0 to 1/2 of full speed for special applications.
An optional two (2) speed transmission is available providing a low range of 0 - 4.8 mph and a high
range of 0 - 7.8 mph
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage
air cleaner. Fuel filter with water separator, 1000 CCA battery; variable speed
hydraulically driven fan.
Fitted with 17.7" wide tracks provide a machine width of 78" and a ground bearing pressure of 4.9 psi.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front
and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Rated Operating Capacity of 3200 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride
system), left hand auxiliary pipework.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides access
to engine bay and daily maintenance and check points.
All prices and specifications subject to change without notice Page 2 of 10 JCB 320T Compact Tracked USD Price Page
JCB 320T SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8616A 8616BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8616 JCB 320T Tracked, Vertical Lift, New Generation, Compact Tracked Loader
881A322 17.7 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 78"
881B339 Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
881B359
881C311
881C312
881D303
881E118
881E119 North American English Manual - for Canopy machine
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F310
881G025
881G084 Foot Throttle
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T, 320T
881G074 2 Speed - Tracked Machines
881G077 Smooth Ride System (SRS)
SUGGESTED LIST PRICE $68,970 $77,177
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required if High Flow ordered.
GP Bucket - 78" - 16.7 cu-ft
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Engine Block Heater- 110V
North American English Manual - for Cab machine
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 320T Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8616 JCB 320T Tracked, Vertical Lift, New Generation, Compact Tracked Loader $64,372
TRACKS (E)
881A322 17.7 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 78" $803
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B338 $804
881B339 $872
Cab with Heater Packages
881B348 $2,756
881B349 $2,823
Cab with Heater and A/C Packages
881B358 $4,576
881B359 $4,645
MACHINE CONTROLS (E)
881C311 $1,070
881C312 $1,616
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB 320T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required if High
Flow ordered.
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch.
(Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual Lock
Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual
Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 320T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D303 GP Bucket - 78" - 16.7 cu-ft $1,135
881D304 GP Bucket - 84" - 18.1 cu-ft $1,506
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,767
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,137
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,793
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,164
Landscape Buckets
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,151
881D308 Landscape Bucket - 84" 22.7 cu-ft $1,402
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,781
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,033
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,808
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,060
6 in 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,295
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,848
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,927
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,480
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,953
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,507
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 320T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 320T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F310 $1,232
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $889
881G079 Roadlight Kit with Brake lights for A/C machines $889
881G089 Grid Heater for Canopy builds (Starting aid) $129
881G025 Engine Block Heater- 110V $134
881G031 Rotating Beacon and Socket $140
881G076 Worklights with 2 rear lights for non A/C machines $41
881G043 White Noise Reverse Alarm $189
881G096 ISO & Dual Hand Control Pattern Changeover $558
881G099 Creep Speed $125
Loader Options
881G077 Smooth Ride System (SRS) $1,005
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T, 320T $514
Hydraulic Options
881G074 2 Speed - Tracked Machines $1,517
881G021 Biodegradable Oils $305
881G102 $525
881G103 $525
881G075 Electric Quick Hitch $803
Operators Compartment Options
881G084 Foot Throttle $204
881G017 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G024 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G005 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G011 Key Start/ Key Immobilizer- All machine configurations $402
881G008 Impact Protection - Laminated Glass - for Canopy builds $536
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,692
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $857
881G107 Laminate glass to replace tempered glass as standard on cab builds ONLY - Tier 4 $124
881G071 Front Mesh Guard for canopy machines (NO front glass required) $673
881G091 Vinyl Air Suspension Seat $616
881G019 Cloth Air Suspension Seat $696
881G020 3 inch Seatbelt $59
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $268
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $178
881G022 Radio with Speakers and Aerial $300
881G037 $569
881G054 Right Hand Mesh to Replace Glass as Standard $161
Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side
door.
Auxiliary Hydraulic Coupler Placement- Left Hand Side (Not compatible with High Flow Option)
Auxiliary Coupler Placement Left hand Side with 14 Pin Connector - Compatible with Multi-function Joysticks (not compatible with High Flow)
U.S. DOLLAR
PRICE PAGES JCB 320T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 320T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
881G012 Hardide Pivot Pins (For Severe Heavy Duty Applications) $722
881G083 Tool Kit - Basic $322
881G098 Tool Kit - Full $478
881G082 Reversing Fan $840
881G100 Canopy Tracked Fender & Fuel Cap Protection $120
881G101 Cab Tracked Fender & Fuel Cap Protection $120
APPLICATION PACKAGES
881G014 $2,009
881G015 $3,348
881G016 $3,014
881G051 $2,281
881G052 $996
881G061 $1,906
881G062 $3,240
881G063 $2,903
881G064 $2,785
881G065 $4,178
881G066 $3,851
881G070 $1,005
881G072 $514
BUCKET ACCESSORIES
881H303 Bolt on Edge For 78" Bucket (1829mm) $330
881H304 Bolt on Edge For 84" Bucket (1981mm) $365
881H307 Tooth Bar for 78" Bucket - over Bucket (1829mm) $675
881H308 Tooth Bar for 84" Bucket - over Bucket (1981mm) $767
881H311 Tooth Bar for 78" Bucket - over Bolt on Edge (1829mm) $675
881H312 Tooth Bar for 84" Bucket - over Bolt on Edge (1981mm) $767
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
A/C FOPS Guard
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars
- Cab machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to
provide protection over laminated cab glass.
Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass.
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars
- Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Heavy Duty Rear Bars for Adverse Applications
JCB 320T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear
Bars - Canopy machines must order G008
EFFECTIVE: MAY, 2013
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order
G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order
G008
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 320T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $1,949
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $1,817
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,120
881U217 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) 334/L5922 $438
Snow Buckets
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $1,776
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,588
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $2,952
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $2,312
881U215 Bolt on Edge for 96" Snow Bucket (2438mm) 334/L5920 $573
881U216 Bolt on Edge for 108" Snow Bucket (2743mm) 334/L5921 $510
Grapple Attachments
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,547
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,862
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $4,856
Hydraulic Brooms/Sweepers
881U248 72" Pick-Up Sweeper 334/P2836 $6,775
881U249 84" Pick-Up Sweeper 334/P2839 $7,275
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,124
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,252
881U302 Hydraulic angle kit for 72" or 84" Angle Broom 332/L3983 $1,358
Hammers
881U352 HM386Q (includes Chisel & Moil) - *881U353 Mounting Bracket required* 980/A3483 $13,145
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,829
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,970
881U401 Planetary Drive Auger - HIGH FLOW - (includes mounting bracket & hoses) 332/L3979 $5,548
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: MAY, 2013 JCB 320T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 8 of 10 JCB 320T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,711
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,060
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $9,485
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,752
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,918
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $11,354
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,290
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $9,840
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,152
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,067
881U510 66" Tiller - 6 inch tines - HIGH FLOW 332/X4380 $5,450
881U511 78" Tiller - 6 inch tines - HIGH FLOW 332/X4381 $6,510
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,018
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,604
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $10,825
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,375
Forestry Cutters
881U516 60" Forestry Cutting Head - HIGH FLOW 334/L8351 $26,416
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,635
881U519 96" Dozer Blade - 6 Way Hydraulic 332.X4287 $7,637
EFFECTIVE: MAY, 2013 JCB 320T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 9 of 10 JCB 320T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,444
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,055
881U532 Bale Spear 333/L5627 $821
Trenchers
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
881U522 48" Trencher with 6" wide chain, crumber and hoses - HIGH FLOW 332/X4290 $7,493
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 332/X4291 $7,095
881U524 72" Brush Cutter - HIGH FLOW 332/X4292 $7,238
881U525 78' Brush Cutter - HIGH FLOW 332/X4293 $7,569
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Tree Spades
881U602 Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter 332/X4296 $10,962
881U603 Tree Spade with Blades / 25 degree cutting angle / 24" - 36" ball diameter 332/X4297 $14,854
881U604 Tree Spade with Blades / 25 degree cutting angle / 32" - 44" ball diameter 332/X4298 $14,110
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $21,020
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $21,308
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4301 $23,313
881U610 40" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4302 $27,395
Saws
881U611 Rock Saw - 18" Depth - HIGH FLOW 332/L7244 $19,952
881U612 Rock Saw - 24" Depth - HIGH FLOW 332/L7269 $22,136
Snow Removal Attachments
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $5,093
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,239
881U658 120" Heavy Duty Snow Blade - Hydraulic Angle 332/L3932 $4,693
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U665 84" Snow Blower - Standard Flow 332/X4385 $7,842
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U662 84" Snow Blower - HIGH FLOW 332/X4401 $13,622
881U670 72" Snow Push 333/L5629 $3,054
881U671 84" Snow Push 333/L5640 $3,147
881U672 96" Snow Push 333/L5646 $3,548
EFFECTIVE: MAY, 2013 JCB 320T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 10 of 10 JCB 320T Compact Tracked USD Price Page
JCB SKID STEER LOADER
330NEW GENERATION
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
14 x 17.5 12 ply, Heavy Duty WIDE TRACK JCB Tires providing 73" width.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Cab tilts forward to provide further access to the hydraulic components. Rear door
provides class leading access to engine bay and daily maintenance and check points.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front
and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.
EFFECTIVE: MAY 1, 2013
LOADER Rated Operating Capacity of 3300 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride
system), left hand auxiliary pipework.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 13.5 mph in both forward and
reverse are obtained with standard two (2) speed transmission with a low range of 0 - 7.3 mph and a
high range of 0 - 13.5 mph. Standard creep speed provides operation from 0 - 1/2 of full speed for
special applications.
SAE certified ROPS/FOPS, left side entry. Vinyl mechanical suspension seat with
seatbelt and operator restraint interlock for drive and loader functions. Cab units
are pressurized and available with heat or heat and A/C, sliding left window and full
side door. Right Hand glass standard on canopy and cab builds.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage
air cleaner; Fuel filter with water separator; 1000 CCA battery; variable speed
hydraulically driven fan.
JCB 330 SKID STEER LOADER
All prices and specifications subject to change without notice Page 2 of 10 JCB 330 Skid Steer USD Price Page
JCB 330 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD
PACKAGE BUILD CODE: 8609A 8609BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8609 JCB 330 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A311 14 X 17.5 12 PR Heavy Duty Pneumatic Tires (provides 73.4" width)
881B309 Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
881B329
881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics
881C312
881D341 GP Bucket - 75" - 15.8 cu-ft
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F310
881G025 Engine Block Heater- 110V
881G084 Foot Throttle
881G091 Vinyl Air Suspension Seat
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T, 320T
881G077 Smooth Ride System (SRS)
SUGGESTED LIST PRICE $55,058 $61,748
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required if High Flow ordered.
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not
meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 3 of 10 JCB 330 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E)
8609 JCB 330 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $49,994
TIRE SETS (E) pick one
881A311 14 X 17.5 12 PR Heavy Duty Pneumatic Tires (provides 73.4" width) $696
881A312 14 X 17.5 12 Brawler Solid Flex Industrial Tire and Wheels (provides 73.4" width) $3,053
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B308 $804
881B309 $872
Cab with Heater Packages
881B318 $2,756
881B319 $2,823
Cab with Heater and A/C Packages
881B328 $4,576
881B329 $4,645
MACHINE CONTROLS (E)
881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics $1,070
881C312 $1,616
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required if High
Flow ordered.
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual
Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
JCB 330 SKID STEER LOADER EFFECTIVE: MAY, 2013
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch.
(Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual Lock
Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 4 of 10 JCB 330 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D341 GP Bucket - 75" - 15.8 cu-ft $1,093
881D303 GP Bucket - 78" - 16.7 cu-ft $1,135
881D304 GP Bucket - 84" - 18.1 cu-ft $1,506
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,721
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,767
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,137
881D345 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,748
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,793
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,164
Landscape Buckets
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,151
881D308 Landscape Bucket - 84" 22.7 cu-ft $1,402
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,781
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,033
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,808
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,060
6 IN 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,295
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,848
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,927
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,480
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,953
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,507
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,658
U.S. DOLLAR PRICE PAGES JCB 330 SKID STEER LOADER EFFECTIVE: MAY, 2013
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 5 of 10 JCB 330 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F310 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312) $1,232
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $889
881G079 Roadlight Kit with Brake lights for A/C machines $889
881G089 Grid Heater for Canopy builds (Starting aid) $129
881G025 Engine Block Heater- 110V $134
881G031 Rotating Beacon and Socket $140
881G076 Worklights with 2 rear lights for non A/C machines $41
881G043 White Noise Reverse Alarm $189
881G096 ISO & Dual Hand Control Pattern Changeover $558
Loader Options
881G077 Smooth Ride System (SRS) $1,005
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T, 320T $514
Hydraulic Options
881G021 Biodegradable Oils $305
881G102 $525
881G103 $525
881G075 Electric Quick Hitch $803
Operators Compartment Options
881G084 Foot Throttle $204
881G017 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G024 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402
881G005 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402
881G011 Key Start/ Key Immobilizer- All machine configurations $402
881G008 Impact Protection - Laminated Glass - for Canopy builds $536
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,692
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $857
881G107 Laminate glass to replace tempered glass as standard on cab builds ONLY - Tier 4 $124
881G071 Front Mesh Guard for canopy machines (NO front glass required) $673
881G091 Vinyl Air Suspension Seat $616
881G019 Cloth Air Suspension Seat $696
881G020 3 inch Seatbelt $59
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $268
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $178
881G022 Radio with Speakers and Aerial $300
881G036 $670
881G054 Right Hand Mesh to Replace Glass as Standard $161
Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side
door.
U.S. DOLLAR
PRICE PAGES JCB 330 SKID STEER LOADER EFFECTIVE: MAY, 2013
Auxiliary Hydraulic Coupler Placement- Left Hand Side (Not compatible with High Flow Option)
Auxiliary Coupler Placement Left hand Side with 14 Pin Connector - Compatible with Multi-function Joysticks (not compatible with High Flow)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 6 of 10 JCB 330 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)
881G012 Hardide Pivot Pins (For Severe Heavy Duty Applications) $722
881G029 Twine Cutter - wheeled machines only $134
881G083 Tool Kit - Basic $322
881G098 Tool Kit - Full $478
881G082 Reversing Fan $840
881G087 Canopy Wheeled Fender & Fuel Cap Protection $120
881G088 Cab Wheeled Fender & Fuel Cap Protection $120
APPLICATION PACKAGES
881G014 $2,009
881G015 $3,348
881G016 $3,014
881G051 $2,281
881G052 $996
881G061 $1,906
881G062 $3,240
881G063 $2,903
881G064 $2,785
881G065 $4,178
881G066 $3,851
881G070 $1,005
881G072 $514
BUCKET ACCESSORIES
881H316 Bolt on Edge for 75" bucket (1905mm) $321
881H303 Bolt on Edge For 78" Bucket (1829mm) $330
881H304 Bolt on Edge For 84" Bucket (1981mm) $365
881H317 Tooth Bar for 75" bucket - over bucket (1905mm) $664
881H307 Tooth Bar for 78" Bucket - over Bucket (1829mm) $675
881H308 Tooth Bar for 84" Bucket - over Bucket (1981mm) $767
881H318 Tooth Bar for 75" bucket - over bolt on edge (1905mm) $664
881H311 Tooth Bar for 78" Bucket - over Bolt on Edge (1829mm) $675
881H312 Tooth Bar for 84" Bucket - over Bolt on Edge (1981mm) $767
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass.
Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass.
A/C FOPS Guard
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines
only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Heavy Duty Rear Bars for Adverse Applications
JCB 330 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines
must order G008
EFFECTIVE: MAY, 2013
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 7 of 10 JCB 330 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,176
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $1,949
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $1,817
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,120
881U217 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) 334/L5922 $438
Snow Buckets
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $1,776
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,588
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $2,952
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $2,312
881U215 Bolt on Edge for 96" Snow Bucket (2438mm) 334/L5920 $573
881U216 Bolt on Edge for 108" Snow Bucket (2743mm) 334/L5921 $510
Grapple Attachments
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,289
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,547
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,862
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,483
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $4,856
Hydraulic Brooms/Sweepers
881U248 72" Pick-Up Sweeper 334/P2836 $6,775
881U249 84" Pick-Up Sweeper 334/P2839 $7,275
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,124
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,252
881U302 Hydraulic angle kit for 72" or 84" Angle Broom 332/L3983 $1,358
Hammers
881U352 HM386Q (includes Chisel & Moil) - *881U353 Mounting Bracket required* 980/A3483 $13,145
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,829
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,970
881U401 Planetary Drive Auger - HIGH FLOW - (includes mounting bracket & hoses) 332/L3979 $5,548
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $424
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $464
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $576
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $661
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $757
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $985
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197
EFFECTIVE: MAY, 2013 JCB 330 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 8 of 10 JCB 330 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $636
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $723
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,097
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,443
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,884
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,308
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $697
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,711
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $168
881U471 Hex. Drive Extension - 18" 980/L7272 $247
881U472 Hex. Drive Extension - 24" 980/L7273 $328
Landscape Development Tools
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,060
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $9,485
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,752
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,918
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $11,354
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,290
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $9,840
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,152
881U508 66" Auto Rake - Standard Flow 332/L7253 $10,676
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,067
881U510 66" Tiller - 6 inch tines - HIGH FLOW 332/X4380 $5,450
881U511 78" Tiller - 6 inch tines - HIGH FLOW 332/X4381 $6,510
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,018
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,604
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $10,825
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,375
Forestry Cutters
881U516 60" Forestry Cutting Head - HIGH FLOW 334/L8351 $26,416
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,635
881U519 96" Dozer Blade - 6 Way Hydraulic 332.X4287 $7,637
EFFECTIVE: MAY, 2013 JCB 330 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 9 of 10 JCB 330 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,013
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,444
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,055
881U532 Bale Spear 333/L5627 $821
Trenchers
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,152
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656
881U522 48" Trencher with 6" wide chain, crumber and hoses - HIGH FLOW 332/X4290 $7,493
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 332/X4291 $7,095
881U524 72" Brush Cutter - HIGH FLOW 332/X4292 $7,238
881U525 78' Brush Cutter - HIGH FLOW 332/X4293 $7,569
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349
881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $21,020
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4300 $21,308
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4301 $23,313
881U610 40" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4302 $27,395
Saws
881U611 Rock Saw - 18" Depth - HIGH FLOW 332/L7244 $19,952
881U612 Rock Saw - 24" Depth - HIGH FLOW 332/L7269 $22,136
Snow Removal Attachments
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $5,093
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,239
881U658 120" Heavy Duty Snow Blade - Hydraulic Angle 332/L3932 $4,693
881U664 78" Snow Blower - Standard Flow 332/X4384 $7,706
881U665 84" Snow Blower - Standard Flow 332/X4385 $7,842
881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640
881U661 78" Snow Blower - HIGH FLOW 332/X4400 $9,925
881U662 84" Snow Blower - HIGH FLOW 332/X4401 $13,622
881U670 72" Snow Push 333/L5629 $3,054
EFFECTIVE: MAY, 2013 JCB 330 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.
Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310
All prices and specifications subject to change without notice Page 10 of 10 JCB 330 Skid Steer USD Price Page
TELESCOPIC HANDLER / LOADALL
JCB LOADALL
506-36
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: JULY 9, 2013
506-36 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
STANDARD EQUIPMENT
GENERAL One piece main frame with sway control and componentized driveline
ENGINE JCB Dieselmax Turbo charged 4.4 L (269 in³) 74 HP Tier 4i, dual element air
cleaners, spin-on fuel filter, fuel/water separator, spin on vertical oil filter,
antifreeze protection down to - 30° F
TRANSMISSION JCB Powershift transmission incorporating torque converter, bevel box and a 4
speed Powershift gearbox in one resiliently mounted unit.
A combined steering column mounted switch incorporating directional control
and 4 forward and 4 reverse Powershift gears. Travel speed 15.5mph (25kph).
AXLES Front and rear drive axles: JCB epicyclic hub reduction, drive/steer axles with
JCB Max-Trac torque proportioning differentials. Permanent 4 wheel drive.
BRAKES Service brakes: Servo-assisted-hydraulically activated, self-adjusting, oil-
immersed multi-disc type on front axle.
Parking brake: Hand operated disc brake on output of gearbox.
ELECTRICAL 12 v negative earth, 130 AH battery. 95 amp alternator. Reverse alarm.
INSTRUMENTS Audio-visual warning system for, coolant temperature, engine oil pressure, air
cleaner, battery charge, transmission oil temperature and pressure, water in
fuel. Engine speed indicator, engine temperature, fuel gauge, clock and lateral
inclinometer. All time display hour meter, visible from outside the cab
STEERING Hydrostatic power steering.
Three steer mode options: front wheel steer; all wheel steer; crab steer:
operated from in the cab by a selection lever
CAB/ CANOPY Quiet, safe and comfortable cab/canopy conforms to ROPS ISO 3471 and FOPS
ISO 3449. Available as safety frame or fully enclosed. (Right hand side and rear
window as standard on canopy. )
Oil servo joystick to lift, extend and tilt. Direct acting mechanical levers on sway
and auxiliary. Tilt adjustable steer column with stalk control of Powershift
change and forward/reverse shuttle. Throttle and brake pedal. Adjustable seat
with adjacent park brake.
BOOM 3 section boom with a max lift height of 36’ 4”, hydraulic parallel lift, max lift
capacity of 6,000lbs to full height. ‘U’ pressing design, made from high tensile
steel. Low maintenance, hard wearing pads.
HYDRAULICS Two stage gear pump, open center system, 29 gpm, 3,770 psi operating
pressure. Single auxiliary hydraulic service on boom.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 506-36 USD Price Page
506-36 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5021A 5021B
CODE ITEM CANOPY CAB
5071
500A010
500B032
500C044
500C045 Cab fully glazed with front, roof and rear wipers, including heater
500D004
500D006 Fabric suspension seat with adjustable back with 2" seatbelt
500E021
500F211
500H091
500K478
EFFECTIVE: MAY 1, 2013 SUGGESTED LIST PRICE $89,176 $93,335
Operators Manual - English
Engine block heater
Face level fan
506-36, 4 Wheel Steer, Sway control, 74HP Turbo engine and powershift
transmission
13.00 x 24 Industrial tread - Air filled
Servo controls - 2 lever placing pattern - One auxiliary service
Canopy with side and rear glass
Vinyl suspension seat, fixed back with 2" seatbelt (For canopy)
Toolcarrier quickhitch
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he
Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 506-36 USD Price Page
506-36 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
5071 506-36, 4 Wheel Steer, Sway control, 74HP Turbo engine and powershift transmission $75,654
TIRES (E)
500A010 13.00 x 24 Industrial tread - Air filled $6,469
500A013 13.00 x 24 Industrial tread - Air filled with puncture sealant $7,728
CONTROLS (E)
500B032 Servo controls - 2 lever placing pattern - One auxiliary service $3,009
OPERATORS AREA (E)
500C044 Canopy with side and rear glass $2,233
500C045 Cab fully glazed with front, roof and rear wipers, including heater $6,392
SEATS (E)
500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For canopy) $613
500D005 Vinyl suspension seat, fixed back with 3" seatbelt (For canopy) $901
500D006 Fabric suspension seat with adjustable back with 2" seatbelt $613
500D007 Fabric suspension seat with adjustable back with 3" seatbelt $901
EFFECTIVE: MAY 1, 2013QUICK COUPLER (E)
500E021 Toolcarrier quickhitch $692
OPERATORS MANUAL (E)
500F211 Operators Manual - English $161
500F212 Operators Manual - French $161
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 506-36 USD Price Page
506-36 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
ELECTRICAL OPTIONS
500G129 Front work lights $139
500G130 Front and rear work lights $225
500G018 Road lights - Headlights, turn signals, stop / tail lights and reverse lights $698
500G402 Strobe light $157
ENGINE OPTIONS
500H083 Fuel tank protection (Guard on rear of tank - Between tire and tank) $447
500H091 Engine block heater $145
OPERATORS AREA OPTIONS
500K080 Air Conditioning $2,981
500K041 Radio ready - Speakers, antenna, wiring - NO RADIO $491
500K042 Sun shade $227
500K050 Front screen guard $480
500K051 Front screen and roof guards $828
500K043 Fire Extinguisher $243
500K478 Face level fan $200
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 506-36 USD Price Page
506-36 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
CARRIAGES Standard
500M232 48" Carriage, 2.25" Shaft, 12K Capacity 460 209 $1,955
500M233 66" Carriage, 2.25" Shaft, 12K Capacity 581 264 $2,169
500M234 72" Carriage, 2.25" Shaft, 12K Capacity 595 270 $2,250
CARRIAGES Side Tilt
500Q903 48" Side Tilt Carriage, 2.25" Shaft, 10K Capacity 732 332 $4,583
500Q904 72" Side Tilt Carriage, 2.25" Shaft, 10K Capacity 875 397 $4,952
CARRIAGES Side Shift
500Q905 48" Side Shift Carriage, 2.25" Shaft, 10K Capacity 831 377 $5,256
500Q906 72" Side Shift Carriage, 2.25" Shaft, 10K Capacity 988 448 $5,538
CARRIAGES Swing
500Q907 72" Swing Carriage, 2.25" Shaft, 10K Capacity 1,050 476 $8,739
FORKS
500M224 48" x 5" x 2" Pallet forks (2) for 2.25" fork shaft 318 144 $1,337
500M225 60" x 5" x 2" Pallet forks (2) for 2.25" fork shaft 362 164 $1,636
500M803 72" x 5" x 2" Pallet forks (2) for 2.25" fork shaft (6,200 lbs capacity at 36" load center) 474 215 $1,815
500M229 48" x 4" x 2.5" Pallet forks (2) for 2.25" fork shaft 318 144 $1,733
EFFECTIVE: MAY 1, 2013OTHER ATTACHMENTS
500L803 1 cu. Yd. 96" wide utility bucket 775 352 $2,337
500T815 12' Truss boom (1,400 lbs capacity) 205 93 $2,979
500T816 Coupler blank 85 39 $776
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 506-36 USD Price Page
JCB LOADALL
507-42
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: JULY 9, 2013
507-42 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
STANDARD EQUIPMENT
GENERAL One piece main frame with sway control and componentized driveline,
automatic rear axle stabilization system.
ENGINE JCB Ecomax Turbo charged 4.4 L (269 in³) 74 HP, Tier 4i, dual element air
cleaners, spin-on fuel filter, fuel/water separator, spin on vertical oil filter,
antifreeze protection down to - 30° F
TRANSMISSION JCB Powershift transmission incorporating torque converter, bevel box and a 4
speed Powershift gearbox in one resiliently mounted unit.
A combined steering column mounted switch incorporating directional control
and 4 forward and 4 reverse Powershift gears. Travel speed 15.5mph (25kph).
AXLES Front and rear drive axles: JCB epicyclic hub reduction, drive/steer axles with
JCB Max-Trac torque proportioning differentials. Permanent 4 wheel drive.
BRAKES Service brakes: Servo-assisted-hydraulically activated, self-adjusting, oil-
immersed multi-disc type on front and rear axles.
Parking brake: Hand operated disc brake on output of gearbox.
ELECTRICAL 12 v negative earth, 130 AH battery. 95 amp alternator. Reverse alarm.
INSTRUMENTS Audio-visual warning system for, coolant temperature, engine oil pressure, air
cleaner, battery charge, transmission oil temperature and pressure, water in
fuel. Engine speed indicator, engine temperature, fuel gauge, clock and lateral
inclinometer. All time display hour meter, visible from outside the cab
STEERING Hydrostatic power steering.
Three steer mode options: front wheel steer; all wheel steer; crab steer:
operated from in the cab by a selection lever
CAB/ CANOPY Quiet, safe and comfortable cab/canopy conforms to ROPS ISO 3471 and FOPS
ISO 3449. Available as safety frame or fully enclosed. (Right hand side and rear
window as standard on canopy. )
Oil servo joystick to lift, extend and tilt. Direct acting mechanical levers on sway
and auxiliary. Tilt adjustable steer column with stalk control of Powershift
change and forward/reverse shuttle. Throttle and brake pedal. Adjustable seat
with adjacent park brake.
BOOM 3 section boom with a max lift height of 42’ , hydraulic parallel lift, max lift
capacity of 7,000lbs. ‘U’ pressing design, made from high tensile steel. Low
maintenance, hard wearing pads.
HYDRAULICS Two stage gear pump, open center system, 29 gpm, 3,770 psi operating
pressure. Single auxiliary hydraulic service on boom.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 509-42 USD Price Page
507-42 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5020A 5020B
CODE ITEM CANOPY CAB
5449 507-42, 4 Wheel Steer, Sway control, RAS, 74HP Turbo engine and powershift transmission
500A031 14.00 x 24 Industrial tread - Air filled
500B032 Servo controls - 2 lever placing pattern - One auxiliary service
500C044 Canopy with side and rear glass
500C046 Cab fully glazed with front, roof and rear wipers, including heater
500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For canopy)
500D006 Fabric suspension seat with adjustable back with 2" seatbelt
500E021 Toolcarrier quickhitch
500F211 Operators Manual - English
500H091 Engine block heater
500K478 Face level fan
SUGGESTED LIST PRICE $97,569 $101,728
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he
Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 509-42 USD Price Page
507-42 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
5449 507-42, 4 Wheel Steer, Sway control, RAS, 74HP Turbo engine and powershift transmission $82,507
TIRES (E)
500A031 14.00 x 24 Industrial tread - Air filled $8,009
500A033 14.00 x 24 Industrial tread - Air filled with puncture sealant $9,432
CONTROLS (E)
500B032 Servo controls - 2 lever placing pattern - One auxiliary service $3,009
OPERATORS AREA (E)
500C044 Canopy with side and rear glass $2,233
500C045 Cab fully glazed with front, roof and rear wipers, including heater $6,392
SEATS (E)
500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For canopy) $613
500D005 Vinyl suspension seat, fixed back with 3" seatbelt (For canopy) $901
500D006 Fabric suspension seat with adjustable back with 2" seatbelt $613
500D007 Fabric suspension seat with adjustable back with 3" seatbelt $901
QUICK COUPLER (E)
500E021 Toolcarrier quickhitch $692
OPERATORS MANUAL (E)
500F211 Operators Manual - English $161
500F212 Operators Manual - French $161
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 509-42 USD Price Page
507-42 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
ELECTRICAL OPTIONS
500G129 Front work lights $139
500G130 Front and rear work lights $225
500G018 Road lights - Headlights, turn signals, stop / tail lights and reverse lights $698
500G402 Strobe light $157
ENGINE OPTIONS
500H083 Fuel tank protection (Guard on rear of tank - Between tire and tank) $447
500H091 Engine block heater $145
OPERATORS AREA OPTIONS
500K080 Air Conditioning $2,981
500K041 Radio ready - Speakers, antenna, wiring - NO RADIO $491
500K042 Sun shade $227
500K050 Front screen guard $480
500K051 Front screen and roof guards $828
500K043 Fire Extinguisher $243
500K478 Face level fan $200
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 509-42 USD Price Page
507-42 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
CARRIAGES Standard
500M232 48" Carriage, 2.25" Shaft, 12K Capacity 460 209 $1,955
500M233 66" Carriage, 2.25" Shaft, 12K Capacity 581 264 $2,169
500M234 72" Carriage, 2.25" Shaft, 12K Capacity 595 270 $2,250
CARRIAGES Side Tilt
500Q903 48" Side Tilt Carriage, 2.25" Shaft, 10K Capacity 732 332 $4,583
500Q904 72" Side Tilt Carriage, 2.25" Shaft, 10K Capacity 875 397 $4,952
CARRIAGES Side Shift
500Q905 48" Side Shift Carriage, 2.25" Shaft, 10K Capacity 831 377 $5,256
500Q906 72" Side Shift Carriage, 2.25" Shaft, 10K Capacity 988 448 $5,538
CARRIAGES Swing
500Q907 72" Swing Carriage, 2.25" Shaft, 10K Capacity 1,050 476 $8,739
FORKS
500M224 48" x 5" x 2" Pallet forks (2) for 2.25" fork shaft 318 144 $1,337
500M225 60" x 5" x 2" Pallet forks (2) for 2.25" fork shaft 362 164 $1,636
500M803 72" x 5" x 2" Pallet forks (2) for 2.25" fork shaft (6,200 lbs capacity at 36" load center) 474 215 $1,815
500M229 48" x 4" x 2.5" Pallet forks (2) for 2.25" fork shaft 318 144 $1,733
OTHER ATTACHMENTS
500L803 1 cu. Yd. 96" wide utility bucket 775 352 $2,337
500T815 12' Truss boom (1,400 lbs capacity) 205 93 $2,979
500T816 Coupler blank 85 39 $776
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 509-42 USD Price Page
JCB LOADALL
509-42
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: JULY 9, 2013
509-42 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
STANDARD EQUIPMENT
GENERAL One piece main frame with sway control and componentized driveline,
automatic rear axle stabilization system.
ENGINE JCB Dieselmax Turbo charged 4.4 L (269 in³) 109 HP, Tier 4i, dual element air
cleaners, spin-on fuel filter, fuel/water separator, spin on vertical oil filter,
antifreeze protection down to - 30° F
TRANSMISSION JCB Powershift transmission incorporating torque converter, bevel box and a 4
speed Powershift gearbox in one resiliently mounted unit.
A combined steering column mounted switch incorporating directional control
and 4 forward and 4 reverse Powershift gears. Travel speed 15.5mph (25kph).
AXLES Front and rear drive axles: JCB epicyclic hub reduction, drive/steer axles with
JCB Max-Trac torque proportioning differentials. Permanent 4 wheel drive.
BRAKES Service brakes: Servo-assisted-hydraulically activated, self-adjusting, oil-
immersed multi-disc type on front and rear axles.
Parking brake: Hand operated disc brake on output of gearbox.
ELECTRICAL 12 v negative earth, 130 AH battery. 95 amp alternator. Reverse alarm.
INSTRUMENTS Audio-visual warning system for, coolant temperature, engine oil pressure, air
cleaner, battery charge, transmission oil temperature and pressure, water in
fuel. Engine speed indicator, engine temperature, fuel gauge, clock and lateral
inclinometer. All time display hour meter, visible from outside the cab
STEERING Hydrostatic power steering.
Three steer mode options: front wheel steer; all wheel steer; crab steer:
operated from in the cab by a selection lever
CAB/ CANOPY Quiet, safe and comfortable cab/canopy conforms to ROPS ISO 3471 and FOPS
ISO 3449. Available as safety frame or fully enclosed. (Right hand side and rear
window as standard on canopy. )
Oil servo joystick to lift, extend and tilt. Direct acting mechanical levers on sway
and auxiliary. Tilt adjustable steer column with stalk control of Powershift
change and forward/reverse shuttle. Throttle and brake pedal. Adjustable seat
with adjacent park brake.
BOOM 3 section boom with a max lift height of 42’ , hydraulic parallel lift, max lift
capacity of 9,000lbs. ‘U’ pressing design, made from high tensile steel. Low
maintenance, hard wearing pads.
HYDRAULICS Two stage gear pump, open center system, 29 gpm, 3,770 psi operating
pressure. Single auxiliary hydraulic service on boom.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 509-42 USD Price Page
509-42 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5020A 5020B
CODE ITEM CANOPY CAB
5070 509-42, 4 Wheel Steer, Sway control, RAS, 109HP Turbo engine and powershift transmission
500A031 14.00 x 24 Industrial tread - Air filled
500B032 Servo controls - 2 lever placing pattern - One auxiliary service
500C044 Canopy with side and rear glass
500C046 Cab fully glazed with front, roof and rear wipers, including heater
500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For canopy)
500D006 Fabric suspension seat with adjustable back with 2" seatbelt
500E021 Toolcarrier quickhitch
500F213 Operators Manual - English
500H091 Engine block heater
500K478 Face level fan
SUGGESTED LIST PRICE $102,869 $107,028
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he
Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 509-42 USD Price Page
509-42 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
5070 509-42, 4 Wheel Steer, Sway control, RAS, 109HP Turbo engine and powershift transmission $87,808
TIRES (E)
500A031 14.00 x 24 Industrial tread - Air filled $8,009
500A033 14.00 x 24 Industrial tread - Air filled with puncture sealant $9,432
CONTROLS (E)
500B032 Servo controls - 2 lever placing pattern - One auxiliary service $3,009
OPERATORS AREA (E)
500C044 Canopy with side and rear glass $2,233
500C046 Cab fully glazed with front, roof and rear wipers, including heater $6,392
SEATS (E)
500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For canopy) $613
500D005 Vinyl suspension seat, fixed back with 3" seatbelt (For canopy) $901
500D006 Fabric suspension seat with adjustable back with 2" seatbelt $613
500D007 Fabric suspension seat with adjustable back with 3" seatbelt $901
QUICK COUPLER (E)
500E021 Toolcarrier quickhitch $692
OPERATORS MANUAL (E)
500F213 Operators Manual - English $161
500F214 Operators Manual - French $161
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 509-42 USD Price Page
509-42 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
ELECTRICAL OPTIONS
500G129 Front work lights $139
500G130 Front and rear work lights $225
500G018 Road lights - Headlights, turn signals, stop / tail lights and reverse lights $698
500G402 Strobe light $157
ENGINE OPTIONS
500H083 Fuel tank protection (Guard on rear of tank - Between tire and tank) $447
500H091 Engine block heater $145
OPERATORS AREA OPTIONS
500K081 Air Conditioning $2,981
500K041 Radio ready - Speakers, antenna, wiring - NO RADIO $491
500K042 Sun shade $227
500K050 Front screen guard $480
500K051 Front screen and roof guards $828
500K043 Fire Extinguisher $243
500K478 Face level fan $200
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 509-42 USD Price Page
509-42 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
CARRIAGES Standard
500M232 48" Carriage, 2.25" Shaft, 12K Capacity 460 209 $1,955
500M233 66" Carriage, 2.25" Shaft, 12K Capacity 581 264 $2,169
500M234 72" Carriage, 2.25" Shaft, 12K Capacity 595 270 $2,250
CARRIAGES Side Tilt
500Q903 48" Side Tilt Carriage, 2.25" Shaft, 10K Capacity 732 332 $4,583
500Q904 72" Side Tilt Carriage, 2.25" Shaft, 10K Capacity 875 397 $4,952
CARRIAGES Side Shift
500Q905 48" Side Shift Carriage, 2.25" Shaft, 10K Capacity 831 377 $5,256
500Q906 72" Side Shift Carriage, 2.25" Shaft, 10K Capacity 988 448 $5,538
CARRIAGES Swing
500Q907 72" Swing Carriage, 2.25" Shaft, 10K Capacity 1,050 476 $8,739
FORKS
500M224 48" x 5" x 2" Pallet forks (2) for 2.25" fork shaft 318 144 $1,337
500M225 60" x 5" x 2" Pallet forks (2) for 2.25" fork shaft 362 164 $1,636
500M803 72" x 5" x 2" Pallet forks (2) for 2.25" fork shaft (6,200 lbs capacity at 36" load center) 474 215 $1,815
500M229 48" x 4" x 2.5" Pallet forks (2) for 2.25" fork shaft 318 144 $1,733
OTHER ATTACHMENTS
500L803 1 cu. Yd. 96" wide utility bucket 775 352 $2,337
500T815 12' Truss boom (1,400 lbs capacity) 205 93 $2,979
500T816 Coupler blank 85 39 $776
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 509-42 USD Price Page
JCB LOADALL
510-56
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: JULY 9, 2013
510-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
STANDARD EQUIPMENT
GENERAL One piece main frame with sway control and componentized driveline,
automatic rear axle stabilization system, axle mounted front stabilizers.
ENGINE JCB Dieselmax Turbo charged 4.4 L (269 in³) 109 HP, Tier 4i, dual element air
cleaners, spin-on fuel filter, fuel/water separator, spin on vertical oil filter,
antifreeze protection down to - 30° F
TRANSMISSION JCB Powershift transmission incorporating torque converter, bevel box and a 4
speed Powershift gearbox in one resiliently mounted unit.
A combined steering column mounted switch incorporating directional control
and 4 forward and 4 reverse Powershift gears. Travel speed 15.5mph (25kph).
AXLES Front and rear drive axles: JCB epicyclic hub reduction, drive/steer axles with
JCB Max-Trac torque proportioning differentials. Permanent 4 wheel drive.
BRAKES Service brakes: Servo-assisted-hydraulically activated, self-adjusting, oil-
immersed multi-disc type on front and rear axles.
Parking brake: Hand operated disc brake on output of gearbox.
ELECTRICAL 12 v negative earth, 130 AH battery. 95 amp alternator. Reverse alarm.
INSTRUMENTS Audio-visual warning system for, coolant temperature, engine oil pressure, air
cleaner, battery charge, transmission oil temperature and pressure, water in
fuel. Engine speed indicator, engine temperature, fuel gauge, clock and lateral
inclinometer. All time display hour meter, visible from outside the cab
STEERING Hydrostatic power steering.
Three steer mode options: front wheel steer; all wheel steer; crab steer:
operated from in the cab by a selection lever
CAB/ CANOPY Quiet, safe and comfortable cab/canopy conforms to ROPS ISO 3471 and FOPS
ISO 3449. Available as safety frame or fully enclosed. (Right hand side and rear
window as standard on canopy. )
Oil servo joystick to lift, extend and tilt. Direct acting mechanical levers on sway
and auxiliary. Tilt adjustable steer column with stalk control of Powershift
change and forward/reverse shuttle. Throttle and brake pedal. Adjustable seat
with adjacent park brake.
BOOM 4 section boom with a max lift height of 56’ , hydraulic parallel lift, max lift
capacity of 10,000lbs. ‘U’ pressing design, made from high tensile steel. Low
maintenance, hard wearing pads.
HYDRAULICS Two stage gear pump, open center system, 29 gpm, 3,770 psi operating
pressure. Single auxiliary hydraulic service on boom.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 510-56 USD Price Page
510-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5336A 5336B
CODE ITEM CAN/4WS CAB/4WS
5223
500A036 17.50 x 25 Industrial tread - Air filled
500B033
500C044 Canopy with side and rear glass
500C046
500D004
500D006
500E021 Toolcarrier quickhitch
500F213 Operators Manual - English
500H091 Engine block heater
500K478 Face level fan
SUGGESTED LIST PRICE $134,155 $138,192
Fabric suspension seat with adjustable back with 2" seatbelt
510-56, Sway control, Front stabilizers, RAS, 109HP Turbo engine and powershift
transmission
Servo controls - 2 lever placing pattern - One auxiliary service
Cab fully glazed with front, roof and rear wipers, including heater
Vinyl suspension seat, fixed back with 2" seatbelt (For canopy)
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he
Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 510-56USD Price Page
510-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
5223 510-56, Sway control, Front stabilizers, RAS, 109HP Turbo engine and powershift transmission $119,532
TIRES (E)
500A036 17.50 x 25 Industrial tread - Air filled $8,009
500A014 17.50 x 25 Industrial tread - Air filled with puncture sealant $10,342
CONTROLS (E)
500B033 Servo controls - 2 lever placing pattern - One auxiliary service $3,009
OPERATORS AREA (E)
500C044 Canopy with side and rear glass $2,233
500C046 Cab fully glazed with front, roof and rear wipers, including heater $6,392
SEATS (E)
500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For canopy) $613
500D005 Vinyl suspension seat, fixed back with 3" seatbelt (For canopy) $901
500D006 Fabric suspension seat with adjustable back with 2" seatbelt $613
500D007 Fabric suspension seat with adjustable back with 3" seatbelt $901
QUICK COUPLER (E)
500E021 Toolcarrier quickhitch $692
OPERATORS MANUAL (E)
500F213 Operators Manual - English $161
500F214 Operators Manual - French $161
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 510-56 USD Price Page
510-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
ELECTRICAL OPTIONS
500G129 Front work lights $139
500G130 Front and rear work lights $225
500G020 Road lights - Headlights, turn signals, stop / tail lights and reverse lights $698
500G402 Strobe light $157
ENGINE OPTIONS
500H083 Fuel tank protection (Guard on rear of tank - Between tire and tank) $447
500H091 Engine block heater $145
OPERATORS AREA OPTIONS
500K081 Air Conditioning $2,981
500K041 Radio ready - Speakers, antenna, wiring - NO RADIO $491
500K042 Sun shade $227
500K050 Front screen guard $480
500K051 Front screen and roof guards $828
500K043 Fire Extinguisher $243
500K478 Face level fan $200
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 510-56 USD Price Page
510-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
CARRIAGES Standard
500M232 48" Carriage, 2.25" Shaft, 12K Capacity 460 209 $1,955
500M233 66" Carriage, 2.25" Shaft, 12K Capacity 581 264 $2,169
500M234 72" Carriage, 2.25" Shaft, 12K Capacity 595 270 $2,250
CARRIAGES Side Tilt
500Q903 48" Side Tilt Carriage, 2.25" Shaft, 10K Capacity 732 332 $4,583
500Q904 72" Side Tilt Carriage, 2.25" Shaft, 10K Capacity 875 397 $4,952
CARRIAGES Side Shift
500Q905 48" Side Shift Carriage, 2.25" Shaft, 10K Capacity 831 377 $5,256
500Q906 72" Side Shift Carriage, 2.25" Shaft, 10K Capacity 988 448 $5,538
CARRIAGES Swing
500Q907 72" Swing Carriage, 2.25" Shaft, 10K Capacity 1,050 476 $8,739
FORKS
500M224 48" x 5" x 2" Pallet forks (2) for 2.25" fork shaft 318 144 $1,337
500M225 60" x 5" x 2" Pallet forks (2) for 2.25" fork shaft 362 164 $1,636
500M803 72" x 5" x 2" Pallet forks (2) for 2.25" fork shaft (6,200 lbs capacity at 36" load center) 474 215 $1,815
500M229 48" x 4" x 2.5" Pallet forks (2) for 2.25" fork shaft 318 144 $1,733
OTHER ATTACHMENTS
500L803 1 cu. Yd. 96" wide utility bucket 775 352 $2,337
500T815 12' Truss boom (1,400 lbs capacity) 205 93 $2,979
500T816 Coupler blank 85 39 $776
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 510-56 USD Price Page
JCB LOADALL
512-56
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: JULY 9, 2013
512-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
STANDARD EQUIPMENT
GENERAL One piece main frame with sway control and componentized driveline,
automatic rear axle stabilization system, axle mounted front stabilizers.
ENGINE JCB ECOMAXTurbo charged 4.4 L (269 in³) 109 HP, Tier 4i, dual element air
cleaners, spin-on fuel filter, fuel/water separator, spin on vertical oil filter,
antifreeze protection down to - 30° F
TRANSMISSION JCB Powershift transmission incorporating torque converter, bevel box and a 4
speed Powershift gearbox in one resiliently mounted unit.
A combined steering column mounted switch incorporating directional control
and 4 forward and 4 reverse Powershift gears. Travel speed 15.5mph (25kph).
AXLES Front and rear drive axles: JCB epicyclic hub reduction, drive/steer axles with
JCB Max-Trac torque proportioning differentials. Permanent 4 wheel drive.
BRAKES Service brakes: Servo-assisted-hydraulically activated, self-adjusting, oil-
immersed multi-disc type on front and rear axles.
Parking brake: Hand operated disc brake on output of gearbox.
ELECTRICAL 12 v negative earth, 130 AH battery. 95 amp alternator. Reverse alarm.
INSTRUMENTS Audio-visual warning system for, coolant temperature, engine oil pressure, air
cleaner, battery charge, transmission oil temperature and pressure, water in
fuel. Engine speed indicator, engine temperature, fuel gauge, clock and lateral
inclinometer. All time display hour meter, visible from outside the cab
STEERING Hydrostatic power steering.
Three steer mode options: front wheel steer; all wheel steer; crab steer:
operated from in the cab by a selection lever
CAB/ CANOPY Quiet, safe and comfortable cab/canopy conforms to ROPS ISO 3471 and FOPS
ISO 3449. Available as safety frame or fully enclosed. (Right hand side and rear
window as standard on canopy. )
Oil servo joystick to lift, extend and tilt. Direct acting mechanical levers on sway
and auxiliary. Tilt adjustable steer column with stalk control of Powershift
change and forward/reverse shuttle. Throttle and brake pedal. Adjustable seat
with adjacent park brake.
BOOM 4 section boom with a max lift height of 56’ , hydraulic parallel lift, max lift
capacity of 12,000lbs. ‘U’ pressing design, made from high tensile steel. Low
maintenance, hard wearing pads.
HYDRAULICS Two stage gear pump, open center system, 29 gpm, 3,770 psi operating
pressure. Single auxiliary hydraulic service on boom.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 512-56 USD Price Page
512-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5122A 5122B
CODE ITEM CAN/4WS CAB/4WS
5232
500A036 17.50 x 25 Industrial tread - Air filled
500B033 Servo controls - 2 lever placing pattern - One auxiliary service
500C044 Canopy with side and rear glass
500C046
500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For canopy)
500D006 Fabric suspension seat with adjustable back with 2" seatbelt
500E023 Toolcarrier quickhitch
500F213 Operators Manual - English
500H091 Engine block heater
500K478 Face level fan
SUGGESTED LIST PRICE $144,042 $148,080
Cab fully glazed with front, roof and rear wipers, including heater
512-56, Sway control, Front stabilizers, RAS, 109HP Turbo engine and powershift transmission
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he
Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 512-56USD Price Page
512-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 9, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
5232 512-56, Sway control, Front stabilizers, RAS, 109HP Turbo engine and powershift transmission $129,420
TIRES (E)
500A036 17.50 x 25 Industrial tread - Air filled $8,009
500A037 17.50 x 25 Industrial tread - Air filled with puncture sealant $10,342
CONTROLS (E)
500B033 Servo controls - 2 lever placing pattern - One auxiliary service $3,009
OPERATORS AREA (E)
500C044 Canopy with side and rear glass $2,233
500C046 Cab fully glazed with front, roof and rear wipers, including heater $6,392
SEATS (E)
500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For canopy) $613
500D005 Vinyl suspension seat, fixed back with 3" seatbelt (For canopy) $901
500D006 Fabric suspension seat with adjustable back with 2" seatbelt $613
500D007 Fabric suspension seat with adjustable back with 3" seatbelt $901
QUICK COUPLER (E)
500E023 Toolcarrier quickhitch $692
OPERATORS MANUAL (E)
500F213 Operators Manual - English $161
500F214 Operators Manual - French $161
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 512-56 USD Price Page
512-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
ELECTRICAL OPTIONS
500G129 Front work lights $139
500G130 Front and rear work lights $225
500G020 Road lights - Headlights, turn signals, stop / tail lights and reverse lights $698
500G402 Strobe light $157
ENGINE OPTIONS
500H083 Fuel tank protection (Guard on rear of tank - Between tire and tank) $447
500H091 Engine block heater $145
OPERATORS AREA OPTIONS
500K081 Air Conditioning $2,981
500K041 Radio ready - Speakers, antenna, wiring - NO RADIO $491
500K042 Sun shade $227
500K050 Front screen guard $480
500K051 Front screen and roof guards $828
500K043 Fire Extinguisher $243
500K478 Face level fan $200
EFFECTIVE: JULY 9, 2013
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 512-56 USD Price Page
512-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
CARRIAGES Standard
500M232 48" Carriage, 2.25" Shaft, 12K Capacity 460 209 $1,955
500M233 66" Carriage, 2.25" Shaft, 12K Capacity 581 264 $2,169
500M234 72" Carriage, 2.25" Shaft, 12K Capacity 595 270 $2,250
FORKS
500M229 48" x 4" x 2.5" Pallet forks (2) for 2.25" fork shaft 318 144 $1,733
500M230 60" x 6" x 2" Pallet forks (2) for 2.25" fork shaft 362 164 $1,636
500M231 72" x 6" x 2" Pallet forks (2) for 2.25" fork shaft 362 164 $1,887
OTHER ATTACHMENTS
500L803 1 cu. Yd. 96" wide utility bucket 775 352 $2,337
500T815 12' Truss boom (1,400 lbs capacity) 205 93 $2,979
500T816 Coupler blank 85 39 $776
EFFECTIVE: JULY 9, 2013
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 512-56 USD Price Page
JCB LOADALL
514-56
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: September 30, 2013
514-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: SEPTEMBER 30, 2013
STANDARD EQUIPMENT
GENERAL One piece main frame with sway control and componentized driveline,
automatic rear axle stabilization system, axle mounted front stabilizers.
ENGINE JCB ECOMAX Turbo charged 4.4 L (269 in³) 109 HP, Tier 4i, dual element air
cleaners, spin-on fuel filter, fuel/water separator, spin on vertical oil filter,
antifreeze protection down to - 30° F
TRANSMISSION JCB Powershift transmission incorporating torque converter, bevel box and a 4
speed Powershift gearbox in one resiliently mounted unit.
A combined steering column mounted switch incorporating directional control
and 4 forward and 4 reverse Powershift gears. Travel speed 15.5mph (25kph).
AXLES Front and rear drive axles: JCB epicyclic hub reduction, drive/steer axles with
JCB Max-Trac torque proportioning differentials. Permanent 4 wheel drive.
BRAKES Service brakes: Servo-assisted-hydraulically activated, self-adjusting, oil-
immersed multi-disc type on front and rear axles.
Parking brake: Hand operated disc brake on output of gearbox.
ELECTRICAL 12 v negative earth, 130 AH battery. 95 amp alternator. Reverse alarm.
INSTRUMENTS Audio-visual warning system for, coolant temperature, engine oil pressure, air
cleaner, battery charge, transmission oil temperature and pressure, water in
fuel. Engine speed indicator, engine temperature, fuel gauge, clock and lateral
inclinometer. All time display hour meter, visible from outside the cab
STEERING Hydrostatic power steering.
Three steer mode options: front wheel steer; all wheel steer; crab steer:
operated from in the cab by a selection lever
CAB/ CANOPY Quiet, safe and comfortable cab/canopy conforms to ROPS ISO 3471 and FOPS
ISO 3449. Available as safety frame or fully enclosed. (Right hand side and rear
window as standard on canopy. )
Oil servo joystick to lift, extend and tilt. Direct acting mechanical levers on sway
and auxiliary. Tilt adjustable steer column with stalk control of Powershift
change and forward/reverse shuttle. Throttle and brake pedal. Adjustable seat
with adjacent park brake.
BOOM 4 section boom with a max lift height of 56’ , hydraulic parallel lift, max lift
capacity of 14,000lbs. ‘U’ pressing design, made from high tensile steel. Low
maintenance, hard wearing pads.
HYDRAULICS Two stage gear pump, open center system, 29 gpm, 3,770 psi operating
pressure. Single auxiliary hydraulic service on boom.
SECTIONS ARE ORGANIZED AS FOLLOWS: Section 1 - PACKAGE BUILDS Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
514-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: SEPTEMBER 30, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5603A 5603B
CODE ITEM CAN/4WS CAB/4WS
5603
500A042 17.25x 25 TITAN 20PLY (UNBALLASTED)
500B033 Servo controls - 2 lever placing pattern - One auxiliary
service
500C044 Canopy with side and rear glass
500C046
500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For
canopy)
500D006 Fabric suspension seat with adjustable back with 2"
seatbelt
500E489 72" Side Tilt Carriage
500F213 Operators Manual - English
500H091 Engine block heater
500K478 Face level fan
SUGGESTED LIST PRICE $172,381 $176,420
514-56, Sway control, Front stabilizers, RAS, 109HP Turbo engine and powershift transmission
Cab fully glazed with front, roof and rear wipers, including heater
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
514-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: SEPTEMBER 30, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
5603 514-56, Sway control, Front stabilizers, RAS, 109HP Turbo engine and powershift transmission $156,598
TIRES (E)
500A042 17.25x 25 TITAN 20PLY (UNBALLASTED) $9,609
500A043 17.25x 25 TITAN 20PLY (UNBALLASTED WITH SEALANT) $10,040
500A044 17.25x 25 TITAN 20PLY (FOAM BALLASTED) $13,784
CONTROLS (E)
500B033 Servo controls - 2 lever placing pattern - One auxiliary service $2,921
OPERATORS AREA (E)
500C044 Canopy with side and rear glass $2,168
500C046 Cab fully glazed with front, roof and rear wipers, including heater $6,207
SEATS (E)
500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For canopy) $594
500D005 Vinyl suspension seat, fixed back with 3" seatbelt (For canopy) $874
500D006 Fabric suspension seat with adjustable back with 2" seatbelt $594
500D007 Fabric suspension seat with adjustable back with 3" seatbelt $874
CARRIAGES (E)
500E489 72" Side Tilt Carriage $0
OPERATORS MANUAL (E)
500F213 Operators Manual - English $156
500F214 Operators Manual - French $156
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
514-56 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
ELECTRICAL OPTIONS
500G129 Front work lights $135
500G130 Front and rear work lights $218
500G020 Road lights - Headlights, turn signals, stop / tail lights and reverse lights $678
500G402 Strobe light $153
ENGINE OPTIONS
500H083 Fuel tank protection (Guard on rear of tank - Between tire and tank) $434
500H091 Engine block heater $141
OPERATORS AREA OPTIONS
500K081 Air Conditioning $2,981
500K041 Radio ready - Speakers, antenna, wiring - NO RADIO $477
500K042 Sun shade $220
500K050 Front screen guard $466
500K051 Front screen and roof guards $803
500K043 Fire Extinguisher $236
500K478 Face level fan $194
FORKS
500M240 Forks 60 x 130 x1829 15,700lb $2,157
EFFECTIVE: SEPTEMBER 30, 2013
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.
JCB LOADALL
515-40COMPACT TELESCOPIC HANDLER
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
515-40 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE 2.3 liter Industrial diesel, 4 -cylinder, liquid cooled, direct injection with 50 HP
Tier III engine, pre cleaner, dual element air cleaner, spin on filter, water separator thermostart
assist.
TRANSMISSION Hydrostatic Transmission, maximum travel speed 12.4mph. Full-time four-wheel drive and four-wheel steer.
TIRES Option of Industrial or Semi- Turf tread pattern tires
AXLES Beam type axles with two hub mounted drive motors on each axle.
BRAKES Hydraulically activated drum brake on front motors: Parking Brake, manually operated in front hubs.
ELECTRICAL 12 volt, meets IP67 water ingress test standard.
INSTRUMENTATION Visual warning system for coolant temperature, engine oil pressure, air cleaner, battery charge,
fuel gauge, hour meter, high speed and park brake.
CANOPY UNIT ROPS/FOPS certified. RH side glass, roof and rear glass, vinyl covered suspension seat with seat belt,
5' 11" OVERALL HEIGHT horn, in-cab storage. Single lever control for boom lift/lower and rollback/dump with integral
forward/reverse switch. Operator manual.
EFFECTIVE: MAY 1, 2013
CAB UNIT ROPS/FOPS certified. Fabric covered suspension seat with seat belt, heater with defroster vent
5' 11" OVERALL HEIGHT system, front windshield wiper and washer, horn, in-cab storage. Single lever control for
boom lift and dump incorporating forward/reverse switch. Operator manual
TELESCOPIC BOOM Two section, 13' 3" lift height with hydraulic parallel lift, 3300 lb. max lift capacity.
ATTACHMENT Universal Skid Steer Loader Quick Attach with manual locking levers.
MOUNTING
HYDRAULICS Open center 12.5 GPM system. Single lever joystick with "Loader" control pattern (boom/raise/lower,
bucket rollback/dump). Single auxiliary hydraulic service with detent to allow use with continuous
flow applications.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 515-40 USD Price Page
515-40 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 2900A 2900B 2900CCODE ITEM CANOPY CAB CAB A/C
2911
290A002
290B001
290C012
290C013
290D001
290D002 Fabric suspension seat - for cab
290E001 Universal skidsteer quick attach coupler
290F002 Operators manual - American English
290G002
290G005 Face level fan
EFFECTIVE: MAY 1, 2013Air Conditioning and Face Level Fan
290G012 Work lights - 2 front and 1 rear
Shipping Weight - Lbs. 7,416 7,679 7,680
Shipping Weight - Kgs. 3,371 3,490 3,491
SUGGESTED LIST PRICE $56,644 $59,481 $61,963
Radio installation kit, includes speakers - EXCLUDES radio
515-40 Telescopic Handler, 4WS/4WD 50 hp, 3,300 lb max. lift capacity, 13'2"
max. lift height
10.0/75-15.3 10PR Industrial wheel and tire
One auxiliary hydraulic circuit with joystick control of loader functions.
Cab with heater and front wiper with washer
Canopy with no heater
Vinyl suspension seat - for canopy
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine
using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 515-40 USD Price Page
515-40 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
2911 515-40 Telescopic Handler, 4WS/4WD 50 hp, 3,300 lb max. lift capacity, 13'2" max. lift height 5,851 2,660 $54,064
TIRES (E)
290A002 10.0/75-15.3 10PR Industrial wheel and tire 400 182 $659
290A003 10.0/75-15.3 14PR Semi turf wheel and tire 400 182 $649
AUXILIARY HYDRAULICS (E)
290B001 One auxiliary hydraulic circuit with joystick control of loader functions. 15 7 $1,034
OPERATORS AREA (E)
290C012 Cab with heater and front wiper with washer 1,150 523 $2,274
290C013 Canopy with no heater 900 409 $0
SEATS (E)
290D001 Vinyl suspension seat - for canopy 50 23 $0
290D002 Fabric suspension seat - for cab 50 23 $204
EFFECTIVE: MAY 1, 2013ATTACHMENT COUPLER OPTIONS (E)
290E001 Universal skidsteer quick attach coupler 180 82 $583
OPERATORS MANUAL (E)
290F002 Operators manual - American English 5 2 $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 515-40 USD Price Page
515-40 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
GENERAL MACHINE OPTIONS
290G002 12 5 $176
290G003 25 11 $973
290G005 1 0 $183
290G115 2 1 $2,665
290G012 15 7 $303
290R001 15 7 $466
290R004 15 7 $306
290R017 5 2 $1,711
Radio installation kit, includes speakers - EXCLUDES radio
Road Lights and Mirrors
Face level fan
Chaff Guard
3 Point Lifting points
Front Screen Guard
Air Conditioning and Face Level Fan
Work lights - 2 front and 1 rear
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 515-40 USD Price Page
515-40 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - FACTORY BUILT ORDERS
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
FORKS - PALLET
290L015 Floating Forks and Frame 427 194 $2,142
290L014 ITA Forks and Frame 420 191 $2,142
BUCKETS - DIRT / GENERAL PURPOSE
290U670 66" Dirt/GP Bucket / 14.1 cu. ft. Capacity 440 200 $1,184
290U671 72" Dirt/GP Bucket / 15.4 cu. ft. Capacity 473 215 $1,283
290U672 78" Dirt/GP Bucket / 16.7 cu. ft. Capacity 543 247 $1,398
290U673 84" Dirt/GP Bucket / 18.1 cu. ft. Capacity 576 262 $1,854
BUCKETS - LANDSCAPE
290U680 66" Landscape Bucket / 17.5 cu. ft. Capacity 500 227 $1,180
290U681 72" Landscape Bucket / 19.2 cu. ft. Capacity 533 242 $1,300
290U682 78" Landscape Bucket / 20.9 cu. ft. Capacity 608 276 $1,416
290U683 84" Landscape Bucket / 22.7 cu. ft. Capacity 641 291 $1,726
BUCKETS - HIGH CAPACITY / LIGHT MATERIAL
290U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 633 288 $1,588
290U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 749 340 $1,887
290U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 740 336 $2,096
EFFECTIVE: MAY 1, 201396" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 880 400 $2,446
BUCKET ACCESSORIES
290H301 Bolt on Edge for 66" bucket 107 49 $359
290H302 Bolt on Edge for 72" bucket 118 54 $383
290H303 Bolt on Edge for 78" bucket 128 58 $405
290H304 Bolt on Edge for 84" bucket 137 62 $450
290H305 Tooth Bar for 66" bucket - Over bucket 90 41 $762
290H306 Tooth Bar for 72" bucket - Over bucket 102 46 $804
290H307 Tooth Bar for 78" bucket - Over bucket 106 48 $830
290H308 Tooth Bar for 84" bucket - Over bucket 118 54 $945
290H309 Tooth Bar for 66" bucket - Over bolt on edge 112 51 $762
290H310 Tooth Bar for 72" bucket - Over bolt on edge 127 58 $804
290H311 Tooth Bar for 78" bucket - Over bolt on edge 130 59 $830
290H312 Tooth Bar for 84" bucket - Over bolt on edge 140 64 $945
GRAPPLES - BRUSH
290U200 72" Heavy Duty Brush Grapple 925 420 $4,615
290U201 78" Heavy Duty Brush Grapple 999 454 $4,903
290U202 84" Heavy Duty Brush Grapple 1,054 479 $5,158
AG ATTACHMENTS
290U550 72" Manure Forks with Top Grapple 655 298 $3,494
290U551 84" Manure Forks with Top Grapple 805 366 $4,193
290U001 49" Bale Spear 225 102 $1,381
** ATTACHMENTS FOR USE WITH SKIDSTEER QUICK ATTACH COUPLER **
All prices and specifications subject to change without notice page 6 of 6 515-40 USD Price Page
JCB LOADALL
520-40COMPACT TOOL CARRIER
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
520-40 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE 2.2L, 48.8 hp engine, Tier III compliant, Two stage dry-type air cleaner, spin-on fuel
filter with integral water trap, Anti freeze protection to -35 degrees Fahrenheit.
TRANSMISSION Two speed Hydrostatic Transmission. Full-time four-wheel drive and four-wheel steer.
TIRES Option of Industrial or Agriculture tread pattern tires
AXLES JCB Max-Trac with torque proportioning and outboard planetary drive.
BRAKES Service Brake: Hydrostatic braking is assisted by a hydraulically activated, single disc
brake on the transmission output shaft. Parking Brake, manually operated single-disc caliper brake on
the transmission output shaft.
ELECTRICAL 12 volt, meets IP67 water ingress test standard. 55 amp alternator, 95 AH heavy duty battery.
INSTRUMENTS Visual warning system for coolant temperature, engine oil pressure, air cleaner, battery charge,
transmission oil pressure and temperature, fuel gauge and hour meter.
CANOPY UNIT Meets SAE J231 FOPS and SAE J1040 ROPS requirements. Metal side screen, roof and rear glass,
6' 6" OVERALL HEIGHT vinyl covered suspension seat with seat belt, horn, in-cab storage. Single lever control for boom
lift/lower and rollback/dump with integral forward/reverse switch. Operator manual and operation video.
Optional canopy components: dual outside mirrors, front canopy guard, work lights, road lights.
CAB UNIT Meets SAE J231 FOPS and SAE J1040 ROPS requirements. Fabric covered suspension seat with
6' 6" OVERALL HEIGHT seat belt, heater with defroster vent system, front windshield wiper and washer, horn,
in-cab storage. Single lever control for boom lift and dump incorporating forward/reverse switch.
Operator manual and operation video. Optional cab components: dual outside mirrors,
front cab guard, work lights, road lights.
TELESCOPIC BOOM Two section, 13' 2" lift height with hydraulic parallel lift, 4000 lb. Lift capacity to full height.
ATTACHMENT Option of either Universal Skid Steer Loader Quick Attach or Compact Tool Carrier Coupler.
MOUNTING
HYDRAULICS Open center 16 GPM system. Single lever joystick with "Loader" control pattern (boom/raise/lower,
bucket rollback/dump). Float function on boom circuit. Single auxiliary hydraulic service with detent
to allow use with continuous flow applications.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 7 520-40 USD Price Page
520-40 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5817A 5817B 5817FCODE ITEM CANOPY/4WS CAB/4WS CAB/4WS
5817
540A004
540A005
540B004
540C003 Canopy with roof and rear glass
540C001 Cab with heater and front wiper with washer
540D004 Vinyl suspension seat - for CANOPY or CAB
540D001 Fabric suspension seat - for CAB machines
540E001 Universal Skid Steer Loader (SSL) Quick Attach coupler
540F010
540G005
540G020 Face Level Fan
540G004 Exterior Mirrors
540G006 Back-up Alarm (SAE J994 compliant)
540G013
540G014 Front windshield guard - for use with either canopy or cab
540H002
Shipping Weight - Lbs. 11,587 11,656 11,746
Shipping Weight - Kgs. 5,256 5,287 5,328
SUGGESTED LIST PRICE $67,365 $68,405 $68,902
Operators Manual - American English
Limited Slip Differentials - in BOTH front and rear axles (not recommended for
continuous use on paved surfaces where wheels do not slip)
Radio ready - Includes speakers, antenna and harness to install radio - radio
NOT included
Work Lights 2 front top of cab and 2 rear-mounted in counterweight
520-40 4 wheel drive, 4 wheel steer telescopic handler, 48.8 hp, 4000 lb lift
capacity
11.5/80-15.3, 8 ply Solideal TractionMaster - R-1 Agriculture Style Tread
Pattern
12.00 x 16.5, 10 ply Solideal Hauler® SKS - R4 Industrial Style Tread Pattern
One aux. hyd. service with detent for continuous flow applications
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine
using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 7 520-40 USD Price Page
520-40 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
5817 520-40 4 wheel drive, 4 wheel steer telescopic handler, 48.8 hp, 4000 lb lift capacity 9,700 4,409 $63,853
TIRES (E)
540A003 10.00 X 16.5, 12 ply Solideal Hauler® SKS - R4 Industrial Style Tread Pattern 400 182 $515
540A005 12.00 x 16.5, 10 ply Solideal Hauler® SKS - R4 Industrial Style Tread Pattern 450 205 $944
540A007 12,00 x 16.5 10-ply Solideal LifeMaster SKZ - Non-Directional Tread Pattern 1,150 523 $3,378
540A004 11.5/80-15.3, 8 ply Solideal TractionMaster - R-1 Agriculture Style Tread Pattern 520 236 $684
540A006 33 x 15.5 x 16.5, 10 ply Solideal TractionMaster - R-1, Agriculture Style Tread Pattern 850 386 $1,444
AUXILIARY HYDRAULICS (E)
540B004 One aux. hyd. service with detent for continuous flow applications 15 7 $268
OPERATORS AREA (E)
540C001 Cab with heater and front wiper with washer 1,150 523 $1,371
540C003 Canopy with roof and rear glass 1,100 500 $684
540C004 Cab with heater and Air Conditioning, front wiper with washer 1,350 614 $5,926
SEATS (E)
540D001 Fabric suspension seat - for CAB machines 50 23 $0
540D004 Vinyl suspension seat - for CANOPY or CAB 50 23 $0
ATTACHMENT COUPLER OPTIONS (E)
540E001 Universal Skid Steer Loader (SSL) Quick Attach coupler 180 82 $572
540E002 Compact Tool Carrier coupler with MANUAL locking of the retaining pin 200 91 $342
540E003 Compact Tool Carrier coupler with HYDRAULIC locking of the retaining pin 240 109 $1,341
OPERATORS MANUAL (E)
540F010 Operators Manual - American English 5 2 $0
540F019 Operators Manual - French 5 2 $0
540F018 Operators Manual - Spanish 5 2 $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 7 520-40 USD Price Page
520-40 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
DRIVE TRAIN OPTIONS
540H002 Limited Slip Differentials - in BOTH front and rear axles (not 20 9 $756
GENERAL MACHINE OPTIONS
540G005 Work Lights 2 front top of cab and 2 rear-mounted in counterweight 15 7 $301
540G004 Exterior Mirrors 55 25 $169
540G002 Front Head Lights with High/Low beam, Rear Lamps, LH/RH turn signals, Hazard Flashers 20 9 $690
540G006 Back-up Alarm (SAE J994 compliant) 2 1 $109
540G008 Roof Wiper for use with CAB 7 3 $248
540G009 Roof and Rear Wiper for use with CAB 35 16 $469
540G013 Radio ready - Includes speakers, antenna and harness to install radio - radio NOT included 12 5 $172
540G017 Arm Rest - Left Hand rear folding 10 5 $66
540G020 Face Level Fan 7 3 $180
540G015 Chaff guard - Screen covers the fan shroud to min. entry of chaff/debris into radiator 25 11 $301
540G014 Front windshield guard - for use with either canopy or cab 15 7 $466
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 7 520-40 USD Price Page
520-40 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
** ATTACHMENTS FOR USE WITH COMPACT TOOL CARRIER COUPLER **BUCKETS - Attach to Compact Tool Carrier Coupler
540L001 General Purpose bucket, 0.92 yd³, 69 in wide 620 282 $2,357
FORK CARRIAGE WITH FLOATING SHAFT - Attach to Compact Tool Carrier Coupler
540L003 Fork Frame and 42" pallet forks with 1.75" fork shaft 482 219 $1,925
SPECIALIZED FORK CARRIAGES WITH FLOATING SHAFT - Attach to Compact Tool Carrier
540T800 Side Tilt carriage with 1.75" fork shaft, includes load guard (Requires 540M810 or 540M615 forks) 446 203 $3,276
FLOATING SHAFT FORK SETS - For use on Carriages fitted with 1.75" fork sets listed above
540M810 48" Pallet forks (2), 48" x 4" x 1-3/4", for 1.75" fork shaft, (For use on 540T800) 229 104 $1,106
540M615 48" Block tines (6), 48" x 2" x 1-1/2", for 1.75" fork shaft, (For use on 540T800) 318 145 $3,368
ITA CLASS II FORK CARRIAGE - Attach to Compact Tool Carrier Coupler
540LA04 Class II ITA carriage, (Requires 540L114 forks) 326 148 $1,802
ITA CLASS II FORKS - Attach to Compact Tool Carrier Coupler
540L114 48" Class II ITA Forks (2), 48" x 4" x 1-3/4", (For use on 540LA04) 269 122 $1,122
AGRICULTURAL ATTACHMENTS - Attach to Compact Tool Carrier
540LA13 Heavy Duty Manure fork and grab, 75" wide 794 361 $5,982
540LA06 Round bale spike 176 80 $1,430
540LA07 One ton bale fork, includes hoses 992 451 $4,446
OTHER ATTACHMENTS for use with Compact Tool Carrier Coupler
540T803 12'6" truss boom, 800 lbs capacity 209 95 $1,809
540T802 Bucket Sweeper broom, 60" wide with 24" diameter brush 794 361 $9,167
540T805 1200EH Auger includes hoses and coupler 421 191 $3,454
540T806 9" Auger bit 75 34 $507
540T807 12" Auger bit 101 46 $568
540T808 18" Auger bit 163 74 $767
540T809 24" Auger bit 200 91 $874
ADAPTER FOR FITTING SSL ATTACHMENTS TO COMPACT TOOL CARRIER COUPLER
540T804 Weld-on adapter - converts non - compact tool carrier attachments to CTC hitch 300 136 $616
540T801 Adapter coupler - allows skid steer loader attachments to be used w/Compact Tool Carrier hitch 300 136 $1,783
Select Attachments as desired within limitations if indicated. NOTE: SSL (Skid Steer Loader) Coupler and CTC (Compact
Tool Carrier) Couplers are different and attachments are not interchangeable between the couplers unless an adapter is used.
All prices and specifications subject to change without notice page 6 of 7 520-40 USD Price Page
520-40 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - FACTORY BUILT ORDERS (Cont):
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
** ATTACHMENTS FOR USE WITH SKID STEER LOADER QUICK ATTACH **
FORKS - PALLET
540L006 Fork Frame with 1.75" Floating Shaft, Integral Load Guard, 42" Forks 427 194 $2,142
540L005 ITA Class II Fork Frame, Integral Load Guard, 42" Forks 420 191 $2,142
BUCKETS - DIRT / GENERAL PURPOSE
540U670 66" Dirt/GP Bucket / 14.1 cu. ft. Capacity 440 200 $1,184
540U671 72" Dirt/GP Bucket / 15.4 cu. ft. Capacity 473 215 $1,283
540U672 78" Dirt/GP Bucket / 16.7 cu. ft. Capacity 543 247 $1,398
540U673 84" Dirt/GP Bucket / 18.1 cu. ft. Capacity 576 262 $1,854
BUCKETS - LANDSCAPE
540U680 66" Landscape Bucket / 17.5 cu. ft. Capacity 500 227 $1,180
540U681 72" Landscape Bucket / 19.2 cu. ft. Capacity 533 242 $1,300
540U682 78" Landscape Bucket / 20.9 cu. ft. Capacity 608 276 $1,416
540U683 84" Landscape Bucket / 22.7 cu. ft. Capacity 641 291 $1,726
BUCKETS - HIGH CAPACITY / LIGHT MATERIAL
540U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 633 288 $1,588
540U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 749 340 $1,887
540U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 740 336 $2,096
540U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 880 400 $2,446
BUCKET ACCESSORIES
540H301 Bolt on Edge for 66" bucket 107 49 $359
540H302 Bolt on Edge for 72" bucket 118 54 $383
540H303 Bolt on Edge for 78" bucket 128 58 $405
540H304 Bolt on Edge for 84" bucket 137 62 $450
540H305 Tooth Bar for 66" bucket - Over bucket 90 41 $762
540H306 Tooth Bar for 72" bucket - Over bucket 102 46 $804
540H307 Tooth Bar for 78" bucket - Over bucket 106 48 $830
540H308 Tooth Bar for 84" bucket - Over bucket 118 54 $945
540H309 Tooth Bar for 66" bucket - Over bolt on edge 112 51 $762
540H310 Tooth Bar for 72" bucket - Over bolt on edge 127 58 $804
540H311 Tooth Bar for 78" bucket - Over bolt on edge 130 59 $830
540H312 Tooth Bar for 84" bucket - Over bolt on edge 141 64 $945
GRAPPLES - BRUSH
540U200 72" Heavy Duty Brush Grapple 925 420 $4,615
540U201 78" Heavy Duty Brush Grapple 999 454 $4,903
All prices and specifications subject to change without notice page 7 of 7 520-40 USD Price Page
JCB LOADALL
520-50
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
520-50 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
GENERAL One piece unitized mainframe and componentized driveline
ENGINE 4.4L (268 CID), 83.8 SAE GROSS HP, Tier III, Air pre-cleaner, Dual element air cleaner, spin-on fuel filter,
Fuel/water separator, Thermostart assist, Anti-freeze protection to -35 deg. F.
TRANSMISSION JCB 4x4 Powershuttle, Synchronized shifting in all gears, permanent 4WD, transmission disconnect
switch on loader and transmission levers.
AXLES JCB MAX-TRAC with torque proportioning and outboard planetary drive
BRAKES Front and rear axle, multi disc, oil immersed, power assisted self-adjusting. Electrohydraulically
operated oil immersed multi disc type parking brake with brake on alarm and
transmission disconnect.
ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 65 amp alternator, 92 AH heavy duty battery.
Road lights and indicators fitted as standard.
INSTRUMENTS Audible and visual warning system, Tachometer, Hourmeter, Fuel Gauge, Coolant temp. gauge,
Warning light for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,
trans oil pressure, parking brake, Indicators for lights, hazard lights, turn signals (if fitted).
CANOPY UNIT Meets SAE J231 FOPS/ SAE J1040 ROPS requirements, metal side screen, vinyl seat with
7' 2.5" OVERALL HEIGHT seat belt, rear view mirror, front worklights, horn, in-cab storage, single lever control
for boom lift and dump, backup alarm meets SAE J994. Operation and parts manuals,
operation video. OPTIONAL 6' 6.5" OVERALL HEIGHT CANOPY.
CAB UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, deluxe trim, suspension seat with
7' 2.5" OVERALL HEIGHT seat belt, heater with defroster vent system, windshield wipers and washers for front and
rear, rear view mirror, front worklights, windshield guard, horn, in-cab storage. Single lever
control for boom lift and dump, back-up alarm meets SAE J994. Operation and parts
manuals, operation video. OPTIONAL 6' 6.5" OVERALL HEIGHT CAB.
TIRES Choice of industrial or agricultural tread pattern tires to suit a variety of applications.
TELESCOPIC BOOM Two section, 16' 5" lift height with hydraulic parallel lift, 4000 lbs. Capacity to full height.
CARRIAGE Choice of tool carrier with manual pin locking or hydraulic pin-locking.
HYDRAULICS Single lever joystick with "Loader" pattern control. Open center system with 17 GPM.
Single auxiliary hydraulic service.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 520-50 USD Price Page
520-50 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
5329A 5329B 5329FSALES PACKAGE BUILD CODE: CANOPY STD. CAB LOW CAB
CODE ITEM 4WS 4WS 4WS
5329
540A101 10.5/80-18 (10 ply) Firestone, Industrial tread, 5' 11" overall width.
540A103 15.0/55-17 (10 ply) Continental Traction tread, 6' 3" overall width
540B101 One auxiliary hydraulic service, Manual pin locking, (For use on 540E101)
540B103 One auxiliary hydraulic service, Hydraulic pin locking, (For use on 540E102)
540C110 Canopy (7' 2.5" overall height with 540A101 Firestone tires) with roof glass
540C113 Cab (7' 2.5" overall height with 540A101 Firestone tires) heater, tinted glass, roof & rear wiper
540C116 LOW Cab (6' 6.5" overall height with 540A103 Continental tires) heater, tinted glass, roof & rear wiper
540D101 Vinyl Suspension Seat (for use with 540C110 canopy)
540D102 Cloth Suspension Seat (for use with 540C103 cab)
540D105 Cloth Static Seat (for use with LOW cab 540C106)
540E101 Compact Toolcarrier with MANUAL pin locking, (Requires 540B101)
540E102 Compact Toolcarrier with HYDRAULIC pin locking, (Requires 540B103)
540F113 Operators Manual - American English
540G123 No Roadlights - Canopy
540G106 No Roadlights - Enclosed Cab
540K101 Front windshield guard for standard cab
540K103 Front windshield guard for LOW Cab
540H101 Limited Slip axles
540H105 Engine block heater, 110-120 volt, 850 Watt (Cab build only)
540G104 Face level fan
Shipping Weight - Lbs. 9,843 9,898 10,043
Shipping Weight - Kgs. 4,465 4,490 4,556
SUGGESTED LIST PRICE $72,932 $74,823 $79,447
520-50 4 wheel drive, 4 wheel steer telescopic handler, 83.8 hp diesel engine,
4000 lb lift capacity, road lights
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine
using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 520-50 USD Price Page
520-50 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
5329 7,863 3,574 $69,116
TIRES (E)
540A101 10.5/80-18 (10 ply) Firestone, Industrial tread, 5' 11" overall width. 600 273 $209
540A103 15.0/55-17 (10 ply) Continental Traction tread, 6' 3" overall width 700 318 $947
AUXILIARY HYDRAULICS (E)
540B101 One auxiliary hydraulic service, Manual pin locking, (For use on 540E101) 15 7 $989
540B103 One auxiliary hydraulic service, Hydraulic pin locking, (For use on 540E102) 60 27 $1,113
OPERATORS AREA (E)
540C113 Cab (7' 2.5" overall height with 540A101 Firestone tires) heater, tinted glass, roof & rear wiper 1,150 523 $3,919
540C116 LOW Cab (6' 6.5" overall height with 540A103 Continental tires) heater, tinted glass, roof & rear wiper 1,150 523 $4,814
540C109 LOW Canopy (6' 6.5" overall height with 540A103 Continental tires) with roof glass 1,100 500 $2,799
540C110 Canopy (7' 2.5" overall height with 540A101 Firestone tires) with roof glass 1,100 500 $2,577
SEATS (E)
540D101 Vinyl Suspension Seat (for use with 540C110 canopy) 50 23 $68
540D102 Cloth Suspension Seat (for use with 540C103 cab) 50 23 $209
540D105 Cloth Static Seat (for use with LOW cab 540C106) 50 23 $209
540D106 Vinyl Static Seat (for use with LOW canopy 540C109) 50 23 $68
TOOLCARRIER (E)
540E101 Compact Toolcarrier with MANUAL pin locking, (Requires 540B101) 200 91 $0
540E102 Compact Toolcarrier with HYDRAULIC pin locking, (Requires 540B103) 200 91 $1,341
OPERATORS MANUAL (E)
540F113 Operators Manual - American English 5 2 $0
540F114 Operators Manual - French 5 2 $0
520-50 4 wheel drive, 4 wheel steer telescopic handler, 83.8 hp diesel engine, 4000 lb lift capacity,
road lights
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code
from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 520-50 USD Price Page
520-50 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
CAB & ELECTRICAL OPTIONS
540G103 Rear worklight 2 1 $104
540G104 Face level fan 2 1 $185
540G106 No Roadlights - Enclosed Cab 0 0 -$492
540G123 No Roadlights - Canopy 0 0 -$492
540G111 #N/A #N/A #N/A #N/A
540G112 Speaker Installation Kit (No radio supplied) 2 1 $172
540H105 Engine block heater, 110-120 volt, 850 Watt (Cab build only) 3 1 $222
540K101 Front windshield guard for standard cab 10 5 $466
540K103 Front windshield guard for LOW Cab 10 5 $466
540K104 Roof wiper (For standard cab only) 6 3 $238
540G117 Air conditioning 30 14 $4,791
OTHER BASE MACHINE OPTIONS
540H101 Limited Slip axles 0 0 $1,035
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 520-50 USD Price Page
520-50 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKETS
540L105 General Purpose bucket, 0.92 cu. yd., 78" wide 653 297 $2,478
540LA01 Light material bucket, 1.4 cu. yd, 78" wide 869 395 $3,333
540L801 #N/A #N/A #N/A #N/A
540L108 Tooth kit for 540L105 GP Bucket 30 14 $336
540L112 78" wide Cutting Edge for 540L105 GP bucket 119 54 $500
CARRIAGES (Include fork shaft)
540L101 Fork Frame and 42" pallet forks with 1.75" fork shaft 482 219 $1,925
540L109 Fork Frame with 1.75" fork shaft (Requires 540M810 or 540M615 forks) 253 115 $1,161
540T819 Loadguard for Fork Frame 540L101 and 540L109 20 9 $405
540T800 Side Tilt carriage with 1.75" fork shaft, includes load guard (Requires 540M810 or 540M615 forks) 446 203 $3,276
540T812 48" wide Side-Shifting Carriage, Class II ITA w/ Loadguard 475 216 $4,845
540LA04 Class II ITA carriage, (Requires 540L114 forks) 326 148 $1,802
540T801 Adapter coupler - allows skid steer loader attachments to be used w/Compact Tool Carrier hitch 300 136 $1,783
FORK SETS (Do not include fork shaft)
540M810 48" Pallet forks (2), 48" x 4" x 1-3/4", for 1.75" fork shaft, (For use on 540T800) 229 104 $1,106
540L114 48" Class II ITA Forks (2), 48" x 4" x 1-3/4", (For use on 540LA04) 269 122 $1,122
540M615 48" Block tines (6), 48" x 2" x 1-1/2", for 1.75" fork shaft, (For use on 540T800) 318 145 $3,368
540LA21 42" Pallet forks (2), 42" x 4" x 1-3/4", for 1.75" fork shaft, (For use on 540L101, 540L109, or 540T800) 229 104 $768
AGRICULTURAL ATTACHMENTS
540LA13 Heavy Duty Manure fork and grab, 75" wide 794 361 $5,982
540LA06 Round bale spike 176 80 $1,430
540LA07 One ton bale fork, includes hoses 992 451 $4,446
OTHER ATTACHMENTS
540T802 Bucket Sweeper broom, 60" wide with 24" diameter brush 794 361 $9,167
540T803 12'6" truss boom, 800 lbs capacity 209 95 $1,809
540T804 Weld-on adapter - converts non - compact tool carrier attachments to CTC hitch 300 136 $616
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 520-50 USD Price Page
JCB LOADALL
524-50
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
524-50 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE 73.7 hp Turbo charged engine, Tier III compliant, Two stage dry-type air cleaner, spin-on fuel filter
filter with integral water trap, Anti freeze protection to -35 degrees Fahrenheit.
TRANSMISSION Variable -Two Speed - Hydrostatic Transmission - 18.6 mi/hr travel speed.
Full-time four-wheel drive. Three Steering Modes - Two Wheel, Four Wheel and Crab.
TIRES Option of Industrial or Agriculture tread pattern tires
AXLES JCB Max-Trac with torque proportioning and outboard planetary drive.
BRAKES Service Brake: Hydrostatic braking is assisted by a hydraulically activated, single disc brake on
the transmission output shaft. Parking Brake, manually operated single-disc caliper brake on
the transmission output shaft.
ELECTRICAL 12 volt system, 95 amp alternator, 110 AH battery (735 CCA @ 0° F). Electrical connections tested to IP69.
Roadlights and indicators fitted as standard
INSTRUMENTS Indicator light / audible alarm monitoring of coolant and transmission oil temperature, engine
and transmision oil pressure, air cleaner restriction, battery charge and parking brake engagement.
Visual display of fuel level, steering mode selection and hour meter.
CANOPY UNIT Meets SAE J231 FOPS and SAE J1040 ROPS requirements. Metal side screen, roof and rear glass,
6' 11" OVERALL HEIGHT vinyl covered suspension seat with seat belt, horn, in-cab storage. Single lever control for boom
lift/lower and rollback/dump with integral forward/reverse switch. Operator manual and operation video.
Back-up alarm (SAE J994 compliant). Optional Canopy Components: exterior mirrors,
front canopy guard, work lights
CAB UNIT Meets SAE J231 FOPS and SAE J1040 ROPS requirements. Fabric covered suspension seat with
6' 11" OVERALL HEIGHT seat belt, heater with defroster vent system, front windshield wiper and washer, horn,
in-cab storage. Single lever control for boom lift and dump incorporating forward/reverse switch.
Operator manual and operation video. Back-up alarm (SAE J994 compliant). Optional Cab
Components: exterior mirrors, front cab guard, work lights
TELESCOPIC BOOM Two section, 16' 5" lift height with hydraulic parallel lift, Lift Capacity: 5,000 lb to full height.
BOOM HITCH Option of Compact Tool Carrier Coupler.
HYDRAULICS Open center 16 gal/min system. Joystick with "Loader" control pattern (boom/raise/lower,
bucket rollback/dump). Float function on boom circuit. Single auxiliary hydraulic service with detent
to allow use with continuous flow applications. Three quarter inch flat face hydraulic couplers on auxiliary
service.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 524-50 USA Price Page
524-50 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5818A 5818B 5818FCODE ITEM CANOPY/4WS CAB/4WS CAB/4WS
5818 524-50 Telescopic Hander, 73.7 hp, 4WD with 3 steering modes, 5000 lb lift cap.
540A010 12.5/80 X 18, 12 ply SL R4 Solideal - R4 Industrial Style Tread Pattern
540A011 12.5-18, 12 ply Solideal N.H.S. 4L-R1 TractionMaster, R-1
Agricultural Style Tread Pattern
540B011 Triple Lever Hydraulic Controls
540B013 Single Lever Hydraulic Controls
540C008 Canopy with roof and rear glass
540C009 Cab with heater and Air Conditioning, front wiper with washer
540C006 Cab with heater and front wiper with washer
540D004 Vinyl suspension seat - for CANOPY or CAB
540D001 Fabric suspension seat - for CAB machines
540E006 Compact Tool Carrier Hitch - Compatible with 520-style Attachments
540E011 Compact Tool Carrier Hitch w/ Hyd. Pin Locking (compatible w/ 520-style attachments)
540F029 Operators Manual - English
540G024 Front and Rear Mounted Worklights
540G020 Face Level Fan
540G028 Exterior Mirrors
540G013 Radio ready - Includes speakers, antenna and harness to install radio - radio NOT included
540G014 Front windshield guard - for use with either canopy or cab
540G034 Chaff Guard
540H006 Limited Slip Differentials - Front and Rear
540H020 Wide core cooling pack
Shipping Weight - Lbs. 12,750 12,819 13,124
Shipping Weight - Kgs. 5,783 5,815 5,953
SUGGESTED LIST PRICE $75,446 $77,053 $87,169
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine
using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 524-50 USA Price Page
524-50 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
5818 524-50 Telescopic Hander, 73.7 hp, 4WD with 3 steering modes, 5000 lb lift cap. 10,630 4,832 $71,068
TIRES (E)
540A010 12.5/80 X 18, 12 ply SL R4 Solideal - R4 Industrial Style Tread Pattern 600 273 $1,681
540A011 12.5-18, 12 ply Solideal N.H.S. 4L-R1 TractionMaster, R-1 Agricultural Style Tread Pattern 600 273 $1,819
540A013 400/70 R18 Goodyear Agricultural Traction (Factory Fit Only) 625 284 $3,710
AUXILIARY HYDRAULICS (E)
540B011 Triple Lever Hydraulic Controls 30 14 $260
540B013 Single Lever Hydraulic Controls 40 18 $2,322
OPERATORS AREA (E)
540C006 Cab with heater and front wiper with washer 1,150 523 $2,101
540C008 Canopy with roof and rear glass 1,100 500 $846
540C009 Cab with heater and Air Conditioning, front wiper with washer 1,350 614 $6,893
SEATS (E)
540D001 Fabric suspension seat - for CAB machines 50 23 $0
540D004 Vinyl suspension seat - for CANOPY or CAB 50 23 $0
ATTACHMENT COUPLER OPTIONS (E)
540E006 Compact Tool Carrier Hitch - Compatible with 520-style Attachments 240 109 $665
540E011 Compact Tool Carrier Hitch w/ Hyd. Pin Locking (compatible w/ 520-style attachments) 240 109 $1,488
OPERATORS MANUAL (E)
540F029 Operators Manual - English 5 2 $0
540F039 Operators Manual - French 5 2 $0
540F036 Operators Manual - Spanish 5 2 $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 524-50 USA Price Page
524-50 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
DRIVE TRAIN OPTIONS
540H006 Limited Slip Differentials - Front and Rear 65 30 $729
540H020 Wide core cooling pack 15 7 $1,214
GENERAL MACHINE OPTIONS
540G009 Roof and Rear Wiper for use with CAB 35 16 $469
540G013 Radio ready - Includes speakers, antenna and harness to install radio - radio NOT included 12 5 $172
540G014 Front windshield guard - for use with either canopy or cab 15 7 $466
540G017 Arm Rest - Left Hand rear folding 10 5 $66
540G020 Face Level Fan 7 3 $180
540G022 Roof and Rear Wipers - CANOPY 35 16 $368
540G023 Front Mounted Worklights 25 11 $292
540G024 Front and Rear Mounted Worklights 25 11 $292
540G034 Chaff Guard 15 7 $357
540G027 Battery Isolator Disconnect Switch 5 2 $158
540G028 Exterior Mirrors 55 25 $169
540G012 Engine block heater, 110-120 volt, 850 Watt (Cab build only) 3 1 $222
540R024 Belly Guard and soundproofing 65 30 $1,004
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 524-50 USA Price Page
524-50 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKETS - Attach to Compact Tool Carrier Coupler
540L010 General Purpose Bucket - 1.3 cubic yard - 82" Wide 670 305 $3,568
FORK CARRIAGE WITH FLOATING SHAFT - Attach to Compact Tool Carrier Coupler
540L015 Fork Frame and 42" Long Forks w/ 2" Floating Fork Shaft 500 227 $3,240
540L016 Fork Frame and 47" Long Forks w/ 1.75" Floating Fork Shaft 550 250 $3,131
SPECIALIZED FORK CARRIAGES WITH FLOATING SHAFT - Attach to Compact Tool Carrier
540T800 Side Tilt carriage with 1.75" fork shaft, includes load guard (Requires 540M810 or 540M615 forks) 446 203 $3,276
FLOATING SHAFT FORK SETS - For use on Carriages fitted with 1.75" fork sets listed above
540M810 48" Pallet forks (2), 48" x 4" x 1-3/4", for 1.75" fork shaft, (For use on 540T800) 229 104 $1,106
540M615 48" Block tines (6), 48" x 2" x 1-1/2", for 1.75" fork shaft, (For use on 540T800) 318 145 $3,368
ITA CLASS II FORK CARRIAGE - Attach to Compact Tool Carrier Coupler
540LA04 Class II ITA carriage, (Requires 540L114 forks) 326 148 $1,802
ITA CLASS II FORKS - Attach to Compact Tool Carrier Coupler
540L114 48" Class II ITA Forks (2), 48" x 4" x 1-3/4", (For use on 540LA04) 269 122 $1,122
AGRICULTURAL ATTACHMENTS - Attach to Compact Tool Carrier
540LA13 Heavy Duty Manure fork and grab, 75" wide 794 361 $5,982
540LA06 Round bale spike 176 80 $1,430
540LA07 One ton bale fork, includes hoses 992 451 $4,446
OTHER ATTACHMENTS for use with Compact Tool Carrier Coupler
540T803 12'6" truss boom, 800 lbs capacity 209 95 $1,809
540T802 Bucket Sweeper broom, 60" wide with 24" diameter brush 794 361 $9,167
ADAPTER FOR FITTING SSL ATTACHMENTS TO COMPACT TOOL CARRIER COUPLER
540T804 Weld-on adapter - converts non - compact tool carrier attachments to CTC hitch 300 136 $616
540T801 Adapter coupler - allows skid steer loader attachments to be used w/Compact Tool Carrier hitch 300 136 $1,783
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 524-50 USA Price Page
JCB LOADALL
527-55
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
527-55 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
ENGINE 4.4L, 73.7 hp Turbo charged engine, Tier III compliant, Two stage dry-type air cleaner, spin-on fuel filter
filter with integral water trap, Anti freeze protection to -35 degrees Fahrenheit.
TRANSMISSION Variable -Two Speed - Hydrostatic Transmission - 18.6 mi/hr travel speed.
Full-time four-wheel drive. Three Steering Modes - Two Wheel, Four Wheel and Crab.
TIRES Option of Industrial Agricultural Tread Pattern Tires
AXLES JCB Max-TRAC with torque proportioning and outboard planetary drive.
BRAKES Service Brake: Hydrostatic braking is assisted by a hydraulically activated, single disc
brake on the transmission output shaft. Parking Brake, manually operated single-disc caliper brake on
the transmission output shaft.
ELECTRICAL 12 volt system, 95 amp alternator, 110AH battery (735 CCA @ 0° F). Electrical connections tested to IP69.
Road lights and indicators fitted as standard
INSTRUMENTS Indicator light / audible alarm monitoring of coolant and transmission oil temperature, engine
and transmission oil pressure, air cleaner restriction, battery charge and parking brake engagement.
Visual display of fuel level, steering mode selection and hour meter.
CANOPY UNIT Meets SAE J231 FOPS and SAE J1040 ROPS requirements. Metal side screen, roof and rear glass,
6' 11" OVERALL HEIGHT vinyl covered suspension seat with seat belt, horn, in-cab storage. Single lever control for boom
lift/lower and rollback/dump with integral forward/reverse switch. Operator manual and operation video.
Back-up alarm (SAE J994 compliant). Optional Canopy Components: exterior mirrors,
front canopy guard, work lights
CAB UNIT Meets SAE J231 FOPS and SAE J1040 ROPS requirements. Fabric covered suspension seat with
6' 11" OVERALL HEIGHT seat belt, heater with defroster vent system, front windshield wiper and washer, horn,
in-cab storage. Single lever control for boom lift and dump incorporating forward/reverse switch.
Operator manual and operation video. Back-up alarm (SAE J994 compliant). Optional Cab
Components: exterior mirrors, front cab guard, work lights
TELESCOPIC BOOM Two section, 18' 0" lift height with hydraulic parallel lift, Lift Capacity: 6,000 lb to full height.
BOOM HITCH Option of Compact Tool Carrier Coupler.
HYDRAULICS Open center 16 gal/min system. Joystick with "Loader" control pattern (boom/raise/lower,
bucket rollback/dump). Float function on boom circuit. Single auxiliary hydraulic service with detent
to allow use with continuous flow applications. Three quarter inch flat face hydraulic couplers on auxiliary
service.
WARRANTY 2 Year full coverage warranty (please see the machine warranty certificate for details)
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 527-55 USA Price Page
527-55 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5819A 5819B 5819FCODE ITEM CANOPY/4WS CAB/4WS CAB/4WS
5819 527-55 Telescopic Hander, 73.7 hp, 4WD with 3 steering modes, 6000 lb lift cap.
540A012 12.5/80 X 18, 14 ply SL R4 Solideal - R4 Industrial Style Tread Pattern
540B011 Triple Lever Hydraulic Controls
540B013 Single Lever Hydraulic Controls
540C008 Canopy with roof and rear glass
540C006 Cab with heater and front wiper with washer
540C009 Cab with heater and Air Conditioning, front wiper with washer
540D004 Vinyl suspension seat - for CANOPY or CAB
540D001 Fabric suspension seat - for CAB machines
540E006 Compact Tool Carrier Hitch - Compatible with 520-style Attachments
540E011 Compact Tool Carrier Hitch w/ Hyd. Pin Locking (compatible w/ 520-style attachments)
540F029 Operators Manual - English
540G024 Front and Rear Mounted Worklights
540G020 Face Level Fan
540G028 Exterior Mirrors
540G013 Radio ready - Includes speakers, antenna and harness to install radio - radio NOT included
540G014 Front windshield guard - for use with either canopy or cab
540G034 Chaff Guard
540H006 Limited Slip Differentials - Front and Rear
540H020 Wide core cooling pack
Shipping Weight - Lbs. 13,080 13,149 13,454
Shipping Weight - Kgs. 5,933 5,964 6,103
SUGGESTED LIST PRICE $79,957 $81,564 $91,541
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine
using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 527-55 USA Price Page
527-55 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
5819 527-55 Telescopic Hander, 73.7 hp, 4WD with 3 steering modes, 6000 lb lift cap. 10,910 4,959 $75,403
TIRES (E)
540A012 12.5/80 X 18, 14 ply SL R4 Solideal - R4 Industrial Style Tread Pattern 650 295 $1,856
540A013 400/70 R18 Goodyear Agricultural Traction (Factory Fit Only) 625 284 $3,710
AUXILIARY HYDRAULICS (E)
540B011 Triple Lever Hydraulic Controls 30 14 $260
540B013 Single Lever Hydraulic Controls 40 18 $2,322
OPERATORS AREA (E)
540C006 Cab with heater and front wiper with washer 1,150 523 $2,101
540C008 Canopy with roof and rear glass 1,100 500 $846
540C009 Cab with heater and Air Conditioning, front wiper with washer 1,350 614 $6,893
SEATS (E)
540D001 Fabric suspension seat - for CAB machines 50 23 $0
540D004 Vinyl suspension seat - for CANOPY or CAB 50 23 $0
ATTACHMENT COUPLER OPTIONS (E)
540E006 Compact Tool Carrier Hitch - Compatible with 520-style Attachments 240 109 $665
540E011 Compact Tool Carrier Hitch w/ Hyd. Pin Locking (compatible w/ 520-style attachments) 240 109 $1,488
OPERATORS MANUAL (E)
540F029 Operators Manual - English 5 2 $0
540F039 Operators Manual - French 5 2 $0
540F036 Operators Manual - Spanish 5 2 $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 527-55 USA Price Page
527-55 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
DRIVE TRAIN OPTIONS
540H006 Limited Slip Differentials - Front and Rear 65 30 $729
540H020 Wide core cooling pack 15 7 $1,214
GENERAL MACHINE OPTIONS
540G028 Exterior Mirrors 55 25 $169
540G009 Roof and Rear Wiper for use with CAB 35 16 $469
540G013 Radio ready - Includes speakers, antenna and harness to install radio - radio NOT included 12 5 $172
540G014 Front windshield guard - for use with either canopy or cab 15 7 $466
540G017 Arm Rest - Left Hand rear folding 10 5 $66
540G020 Face Level Fan 7 3 $180
540G022 Roof and Rear Wipers - CANOPY 35 16 $368
540G023 Front Mounted Worklights 25 11 $292
540G024 Front and Rear Mounted Worklights 25 11 $292
540G034 Chaff Guard 15 7 $357
540G027 Battery Isolator Disconnect Switch 5 2 $158
540G012 Engine block heater, 110-120 volt, 850 Watt (Cab build only) 3 1 $222
540R024 Belly Guard and soundproofing 65 30 $1,004
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 527-55 USA Price Page
527-55 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKETS - Attach to Compact Tool Carrier Coupler
540L010 General Purpose Bucket - 1.3 cubic yard - 82" Wide 670 305 $3,568
FORK CARRIAGE WITH FLOATING SHAFT - Attach to Compact Tool Carrier Coupler
540L015 Fork Frame and 42" Long Forks w/ 2" Floating Fork Shaft 500 227 $3,240
540L016 Fork Frame and 47" Long Forks w/ 1.75" Floating Fork Shaft 550 250 $3,131
SPECIALIZED FORK CARRIAGES WITH FLOATING SHAFT - Attach to Compact Tool Carrier
540T800 Side Tilt carriage with 1.75" fork shaft, includes load guard (Requires 540M810 or 540M615 forks) 446 203 $3,276
FLOATING SHAFT FORK SETS - For use on Carriages fitted with 1.75" fork sets listed above
540M810 48" Pallet forks (2), 48" x 4" x 1-3/4", for 1.75" fork shaft, (For use on 540T800) 229 104 $1,106
540M615 48" Block tines (6), 48" x 2" x 1-1/2", for 1.75" fork shaft, (For use on 540T800) 318 145 $3,368
ITA CLASS II FORK CARRIAGE - Attach to Compact Tool Carrier Coupler
540LA04 Class II ITA carriage, (Requires 540L114 forks) 326 148 $1,802
ITA CLASS II FORKS - Attach to Compact Tool Carrier Coupler
540L114 48" Class II ITA Forks (2), 48" x 4" x 1-3/4", (For use on 540LA04) 269 122 $1,122
AGRICULTURAL ATTACHMENTS - Attach to Compact Tool Carrier
540LA13 Heavy Duty Manure fork and grab, 75" wide 794 361 $5,982
540LA06 Round bale spike 176 80 $1,430
540LA07 One ton bale fork, includes hoses 992 451 $4,446
OTHER ATTACHMENTS for use with Compact Tool Carrier Coupler
540T803 12'6" truss boom, 800 lbs capacity 209 95 $1,809
540T802 Bucket Sweeper broom, 60" wide with 24" diameter brush 794 361 $9,167
ADAPTER FOR FITTING SSL ATTACHMENTS TO COMPACT TOOL CARRIER COUPLER
540T804 Weld-on adapter - converts non - compact tool carrier attachments to CTC hitch 300 136 $616
540T801 Adapter coupler - allows skid steer loader attachments to be used w/Compact Tool Carrier hitch 300 136 $1,783
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 527-55 USA Price Page
JCB LOADALL
531-70
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: JULY 1, 2013
Tier 4i
531-70 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
STANDARD EQUIPMENT
GENERAL One piece unitized mainframe with sway control and componentized driveline
ENGINE 74 GROSS HP, T4i, Dual element air cleaner, spin-on fuel filter,
Fuel/water separator, Anti-freeze protection to -35 deg. F.
TRANSMISSION JCB 4x4 Powershift, Powershuttle direction change, 2.2:1 ratio torque converter, transmission
disconnect on loader lever.
AXLES JCB MAX-TRAC with torque proportioning and outboard planetary drive
BRAKES Internal mounted inboard on front axle, multi disc, oil immersed, Hydraulic actuation, self adjusting.
Independent disc type park brake with brake on alarm and transmission disconnect.
ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 95 amp alternator, 850 CCA low maintenance battery.
INSTRUMENTS Audible and visual warning system, Tachometer, Hourmeter, Fuel Gauge, Coolant temp. gauge,
Warning light for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,
trans oil pressure, parking brake.
CAB UNIT Meets SAE J231 FOPS/ SAE J1040 ROPS requirements, suspension seat with seat belt, tilt
steering column, heater with defroster vent system, windshield wipers and washers for front/rear
and roof glass, rear view mirror, horn, in-cab storage. Backup alarm meets SAE J994
Operation and Parts manuals, operation video.
CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt, tilt steering
column, rear view mirror, horn, in-cab storage, backup alarm meets SAE J994, operation and
parts manuals. Operation video.
TIRES Choice of Options (none standard)
TELESCOPIC BOOM Two section, 23' lift height with hydraulic parallel lift, 6000 lbs. maximum lift capacity to full height.
CARRIAGE Choice of Options (none standard)
HYDRAULICS Dual lever joystick with "Forklift" pattern control. Open center system with 21.6 GPM.
Single auxiliary hydraulic service with 3rd lever control.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 531-70 USD Price Page
531-70 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5621A 5621B
CODE ITEM CAN/4WS CAB/4WS
5621
500A408 15.5-25 SGL(12 ply) Industrial tread bias ply
500B401 One auxiliary hydraulic service
500C072 Canopy with clear right hand side glass
500C065 Cab with heater, tinted glass, front and rear wiper
500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY
500E411 48" wide Q-Fit carriage with 2" fork shaft, (Use L409 Load Guard)
500F606 Operators manual - English Language
500K478 Face level fan
500H452 Engine block heater, 110-120 volt, 850 Watt
500K148 Deluxe cab trim including radio installation kit with manual steer mode selector
500G455 Front and Rear Worklights - CAB or CANOPY
Shipping Weight - Lbs. 15,193 15,254
Shipping Weight - Kgs. 6,892 6,919
SUGGESTED LIST PRICE $107,073 $110,612
531-70 4WD 4 Wheel steer, Telescopic handler with sway control, 74 hp
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he
Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 531-70 USD Price Page
531-70 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
5621 531-70 4WD 4 Wheel steer, Telescopic handler with sway control, 74 hp 12,853 5,830 $94,039
TIRES (E)
500A408 15.5-25 SGL(12 ply) Industrial tread bias ply 600 272 $6,904
500A412 Michelin X-Mine D2 12.00 R 24 700 318 $16,815
AUXILIARY HYDRAULICS (E)
500B401 One auxiliary hydraulic service 15 7 $1,205
500B404 Two auxiliary hydraulic services 15 7 $1,792
OPERATORS AREA (E)
500C065 Cab with heater, tinted glass, front and rear wiper 1,150 522 $4,544
500C072 Canopy with clear right hand side glass 1,100 499 $2,100
SEATS (E)
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY 50 23 $702
500D115 Fabric suspension seat, includes 3" Seatbelt, CAB ONLY 50 23 $773
500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY 50 23 $552
500D117 Vinyl suspension seat, includes 3" Seatbelt CANOPY ONLY 50 23 $634
500D119 Air Suspension Seat -Deluxe Heated includes 2" seatbelt - CAB ONLY 77 35 $1,489
CARRIAGE (E)
500E400 No Carriage- includes mounting pins 50 23 $0
500E411 48" wide Q-Fit carriage with 2" fork shaft, (Use L409 Load Guard) 500 227 $1,955
OPERATORS MANUAL (E)
500F606 Operators manual - English Language 5 2 $0
500F856 Operators manual - French 5 2 $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 531-70 USD Price Page
531-70 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
500K413 Deluxe cab trim including radio installation kit - manual steer mode selector 3 1 $520
500K465 Tilt and Telescopic Steering Column 20 9 $207
500K466 Sun blind, front windshield and roof 4 2 $226
500K470 Front windshield guard 10 5 $466
500K478 Face level fan 5 2 $194
500K507 Deluxe Cab Trim including radio installation - electrical steer mode selector 3 1 $1,299
500K543 Air conditioning 40 18 $3,535
ELECTRICAL OPTIONS
500G132 Front and Rear Worklights - CAB or CANOPY 70 32 $318
500G418 Front and Rear Roadlights (includes turn signals) - CAB 70 32 $1,043
500G438 Front and Rear Roadlights (includes turn signals) - CANOPY 70 32 $1,043
500H452 Engine block heater, 110-120 volt, 850 Watt 3 1 $231
500H500 4WD disconnect 33 15 $567
HYDRAULIC OPTIONS
500J401 Hydraulic Locking Pins for Q-Fit Carriage 14 6 $434
OTHER BASE MACHINE OPTIONS
500H349 Limited Slip Differential (Front Axle only) 0 0 $748
500H524 Servo Assisted Brakes 40 18 $742
500L409 Loadguard (Use with Q-Fit carriage) 35 16 $537
500R401 Rear mounted 1 ton tow hitch 55 25 $211
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 531-70 USD Price Page
531-70 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKETS (Q-Fit mounted)
500E226 88" wide cutting edge, for use on all 88" wide buckets 150 68 PARTS
500E263 1.75 cu. yd, 96" wide scrap grapple, twin independent clamps 1,850 839 $7,768
500E422 2.25 cu. yd, 96" wide trash clamp bucket, single full width clamp 2,350 1,066 $8,914
500L118 1.1 cu. yd, 88" wide 6 in 1 Multipurpose bucket 1,630 739 $9,230
500L129 1.75 cu. yd, 96" wide GP bucket 1,005 456 $3,376
500L804 2.5 cu. yd, 96" wide light material bucket 1,310 594 $4,818
500L805 #N/A #N/A #N/A #N/A
500L810 96" wide cutting edge, for use on all 96" wide buckets 165 75 PARTS
500P105 2.25 cu. yd, 96" wide light material bucket 905 411 $3,850
CARRIAGES (Q-Fit mounted)
500Q800 48" wide side tilt carriage, 2-1/4" fork shaft 500 227 $5,817
500Q801 66" wide side tilt framers carriage with 2-1/4" fork shaft 550 249 $6,034
500Q802 48" wide side shift carriage with 2-1/4" fork shaft 500 227 $6,252
500Q803 66" wide side shift framers carriage with 2-1/4" fork shaft 550 249 $6,514
500Q804 60" wide ITA Class III industrial carriage, (Use with M808 forks) 200 91 $2,702
FORK SETS
500M106 48" x 4" x 2" pallet forks (2) for 2" fork shaft 250 113 $1,043
500M512 60" x 4" x 2" pallet forks (2) for 2" fork shaft 330 150 $1,179
500M800 48" x 4" x 2" brick forks (2) for 2-1/4" fork shaft 250 113 $1,109
500M801 48" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 318 144 $1,433
500M802 60" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 362 164 $1,685
500M803 72" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft, 6200lbs capacity at 36" load center 474 215 $1,945
500M804 48" x 2" x 2" block tines (6) for 2-1/4" fork shaft 462 210 $2,676
500M806 72" x 5" x 2" pallet forks (2) for 2" fork shaft, 5060lbs capacity at 36" load center 374 170 $1,685
500M807 48" x 2" x 1.5" block tines (6) for 2" fork shaft 336 152 $2,492
500M808 48" x 5" x 2" ITA class III forks 370 168 $1,589
OTHER ATTACHMENTS
500Q805 12' truss boom, 1400lbs capacity 400 181 $2,991
500Q806 Q-Fit blank 100 45 $709
500Q808 Angle broom, 96" wide 1,150 522 $10,510
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 531-70 USD Price Page
JCB LOADALL
531-70T
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: JULY 1, 2013
Tier 4i
531-70T LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
STANDARD EQUIPMENT
GENERAL One piece unitized mainframe with rigid frame and componentized driveline
ENGINE 109 HP T4i, dual element air cleaner, spin-on fuel filter,
Fuel/water separator, Anti-freeze protection to -35 degrees F.
TRANSMISSION JCB 4x4 Powershift, Powershuttle direction change, 20 mph travel speed, 2.2:1 ratio torque
converter, transmission disconnect on loader lever.
AXLES JCB MAX-TRAC with torque proportioning and outboard planetary drive.
BRAKES Internal mounted inboard on front axle, multi disc, oil immersed, self adjusting, Independent
disc type parking brake with brake on alarm and transmission disconnect.
ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 95 amp alternator, 850 CCA low maintenance battery.
Reverse alarm.
INSTRUMENTS Audible and visual warning system, Tachometer, Hourmeter, Fuel Gauge, Coolant temp. gauge,
Warning light for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,
trans oil pressure, parking brake. Lift extend and tilt on single lever control.
CAB UNIT Meets SAE J231 FOPS/ SAE J1040 ROPS requirements, suspension seat with seat belt, tilt
steering column, heater with defroster vent system, windshield wipers and washers for front/rear
and roof glass, rear view and external mirrors, horn, in-cab storage. Backup alarm meets SAE J994.
Operation and Parts manuals, operation video.
CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt,
rear view mirror, horn, in-cab storage, backup alarm meets SAE J994, operation and
parts manuals. Operation video.
TIRES Choice of Options (none standard)
TELESCOPIC BOOM Two section, 23' lift height with hydraulic parallel lift, 6000 lbs. maximum lift capacity to full height.
CARRIAGE Choice of Options (none standard)
HYDRAULICS Single lever joystick with "Loader" pattern control. Open center system with 21.6 GPM.
Single auxiliary hydraulic service.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 531-70T USD Price Page
531-70T LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5619B
CODE ITEM CAB/4WS
5619
500A408 15.5-25 SGL(12 ply) Industrial tread bias ply
500B106 One auxiliary hydraulic service
500C065 Cab with heater, tinted glass, front and rear wiper
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY
500E411 48" wide Q-Fit carriage with 2" fork shaft, (Use L409 Load Guard)
500F606 Operators manual - English Language
500G422 Front and Rear Roadlights (includes turn signals) - CAB
500K478 Face level fan
500H452 Engine block heater, 110-120 volt, 850 Watt
500H349 Limited Slip Differential (Front Axle only)
500K148 Deluxe cab trim including radio installation kit with manual steer mode selector
500R401 Rear mounted 1 ton tow hitch
500G132 Front and Rear Worklights - CAB or CANOPY
Shipping Weight - Lbs. 15,379
Shipping Weight - Kgs. 6,976
SUGGESTED LIST PRICE $111,601
531-70T 4WD 4 Wheel steer, Telescopic handler, Rigid Frame, 109 hp Turbo, Powershift
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he
Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 531-70T USD Price Page
531-70T LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
5619 531-70T 4WD 4 Wheel steer, Telescopic handler, Rigid Frame, 109 hp Turbo, Powershift 12,853 5,830 $93,025
TIRES (E)
500A407 Goodyear 17.5 LR24 Agricultural Traction Radial 600 272 $6,793
500A408 15.5-25 SGL(12 ply) Industrial tread bias ply 600 272 $6,904
500A412 Michelin X-Mine D2 12.00 R 24 700 318 $16,815
500A464 Michelin 500/70 R24 XMCL Agricultural Traction Floatation Radials 673 305 $8,045
AUXILIARY HYDRAULICS (E)
500B106 One auxiliary hydraulic service 15 7 $1,205
500B125 Two auxiliary hydraulic services 15 7 $1,792
OPERATORS AREA (E)
500C065 Cab with heater, tinted glass, front and rear wiper 1,150 522 $4,544
500C072 Canopy with clear right hand side glass 1,100 499 $2,100
SEATS (E)
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY 50 23 $702
500D115 Fabric suspension seat, includes 3" Seatbelt, CAB ONLY 50 23 $773
500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY 50 23 $552
500D117 Vinyl suspension seat, includes 3" Seatbelt CANOPY ONLY 50 23 $634
500D119 Air Suspension Seat -Deluxe Heated includes 2" seatbelt - CAB ONLY 77 35 $1,489
CARRIAGE (E)
500E400 No Carriage- includes mounting pins 50 23 $0
500E411 48" wide Q-Fit carriage with 2" fork shaft, (Use L409 Load Guard) 500 227 $1,955
OPERATORS MANUAL (E)
500F606 Operators manual - English Language 5 2 $0
500F856 Operators manual - French 5 2 $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 531-70T USD Price Page
531-70T LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
500K148 Deluxe cab trim including radio installation kit with manual steer mode selector 3 1 $519
500K465 Tilt and Telescopic Steering Column 20 9 $207
500K466 Sun blind, front windshield and roof 4 2 $226
500K470 Front windshield guard 10 5 $466
500K477 Fire extinguisher 10 5 $217
500K478 Face level fan 5 2 $194
500K506 Deluxe cab trim including radio installation with electrical steer mode selector 3 1 $1,299
500K547 Air conditioning 40 18 $3,535
ELECTRICAL OPTIONS
500G132 Front and Rear Worklights - CAB or CANOPY 70 32 $318
500G422 Front and Rear Roadlights (includes turn signals) - CAB 70 32 $1,043
500G438 Front and Rear Roadlights (includes turn signals) - CANOPY 70 32 $1,043
500H452 Engine block heater, 110-120 volt, 850 Watt 3 1 $231
500H475 Reversing Fan 10 5 $786
500H500 4WD disconnect 33 15 $567
HYDRAULIC OPTIONS
500J401 Hydraulic Locking Pins for Q-Fit Carriage 14 6 $434
OTHER BASE MACHINE OPTIONS
500H349 Limited Slip Differential (Front Axle only) 0 0 $748
500H523 Servo Assisted Brakes 40 18 $742
500L409 Loadguard (Use with Q-Fit carriage) 35 16 $537
TOW HITCH
500R401 Rear mounted 1 ton tow hitch 55 25 $211
500R403 Rear mounted 10 ton hydraulic tow hitch with hydraulics and electrics 250 113 $3,007
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 531-70T USD Price Page
531-70T LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKETS (Q-Fit mounted)
500E226 88" wide cutting edge, for use on all 88" wide buckets 150 68 PARTS
500E263 1.75 cu. yd, 96" wide scrap grapple, twin independent clamps 1,850 839 $7,768
500E422 2.25 cu. yd, 96" wide trash clamp bucket, single full width clamp 2,350 1,066 $8,914
500L118 1.1 cu. yd, 88" wide 6 in 1 Multipurpose bucket 1,630 739 $9,230
500L129 1.75 cu. yd, 96" wide GP bucket 1,005 456 $3,376
500L804 2.5 cu. yd, 96" wide light material bucket 1,310 594 $4,818
500L805 #N/A #N/A #N/A #N/A
500L810 96" wide cutting edge, for use on all 96" wide buckets 165 75 PARTS
500P105 2.25 cu. yd, 96" wide light material bucket 905 411 $3,850
CARRIAGES (Q-Fit mounted)
500Q800 48" wide side tilt carriage, 2-1/4" fork shaft 500 227 $5,817
500Q801 66" wide side tilt framers carriage with 2-1/4" fork shaft 550 249 $6,034
500Q802 48" wide side shift carriage with 2-1/4" fork shaft 500 227 $6,252
500Q803 66" wide side shift framers carriage with 2-1/4" fork shaft 550 249 $6,514
500Q804 60" wide ITA Class III industrial carriage, (Use with M808 forks) 200 91 $2,702
FORK SETS
500M106 48" x 4" x 2" pallet forks (2) for 2" fork shaft 250 113 $1,043
500M512 60" x 4" x 2" pallet forks (2) for 2" fork shaft 330 150 $1,179
500M800 48" x 4" x 2" brick forks (2) for 2-1/4" fork shaft 250 113 $1,109
500M801 48" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 318 144 $1,433
500M802 60" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 362 164 $1,685
500M803 72" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft, 6200lbs capacity at 36" load center 474 215 $1,945
500M804 48" x 2" x 2" block tines (6) for 2-1/4" fork shaft 462 210 $2,676
500M806 72" x 5" x 2" pallet forks (2) for 2" fork shaft, 5060lbs capacity at 36" load center 374 170 $1,685
500M807 48" x 2" x 1.5" block tines (6) for 2" fork shaft 336 152 $2,492
500M808 48" x 5" x 2" ITA class III forks 370 168 $1,589
OTHER ATTACHMENTS
500Q805 12' truss boom, 1400lbs capacity 400 181 $2,991
500Q806 Q-Fit blank 100 45 $709
500Q808 Angle broom, 96" wide 1,150 522 $10,510
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 531-70T USD Price Page
JCB LOADALL
535-140HiViz
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: JULY 1, 2013
Tier 4i
535-140 LOADALL HiViz U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
STANDARD EQUIPMENT
GENERAL One piece unitized mainframe with sway control, stabilizers and componentized driveline
ENGINE 109 HP T4i, Dual element air cleaner, spin-on fuel filter,
Fuel/water separator, Anti-freeze protection to -35 deg. F.
TRANSMISSION JCB 4x4 Powershift, Powershuttle direction change, 2.2:1 ratio torque converter, transmission
disconnect on loader lever.
AXLES JCB MAX-TRAC with torque proportioning and outboard planetary drive
BRAKES Internal mounted multi-disc, oil immersed, Servo assisted hydraulic actuation, self adjusting,
Independent disc type parking brake with brake on alarm and transmission disconnect.
ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 95 amp alternator, 850 CCA low maintenance battery.
INSTRUMENTS Audible and visual warning system, Tachometer, Hourmeter, Fuel Gauge, Coolant temp. gauge,
Warning light for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,
trans oil pressure, parking brake.
CAB UNIT Meets SAE J231 FOPS/ SAE J1040 ROPS requirements, suspension seat with seat belt, tilt
steering column, heater with defroster vent system, windshield wipers and washers for front/rear
and roof glass, rear view mirror, horn, in-cab storage. Backup alarm meets SAE J994,
Operation and Parts manuals, operation video.
CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt, tilt steering
column, rear view mirror, horn, in-cab storage, backup alarm meets SAE J994,
operation and parts manuals. Operation video.
TIRES Choice of Options available (none standard)
TELESCOPIC BOOM Three section, 45' 2" lift height with hydraulic parallel lift, 8000 lbs. maximum lift capacity, 2000 lbs. to
full height. Both boom sections extended by hydraulic cylinders.
CARRIAGE Choice of Options available (none standard)
HYDRAULICS Open center system with 29 GPM. Single auxiliary hydraulic service.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 535-140 USD Price Page
535-140 LOADALL HiViz U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5678A 5678B
CODE ITEM CANOPY CAB
5678 535-140 HiViz 4WD 4WS, Sway Control and Stabilizers, 109HP
500A441 15.5-25 SGL(12 ply) Industrial tread bias ply, Calcium Chloride Ballast
500B142 One auxiliary hydraulic service
500C068 Canopy with clear right hand side glass
500C082 Cab with heater, tinted glass, front and rear wiper
500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY
500E006 48" Wide Q-Fit Carriage with 2 1/4" Fork Shaft (Use L409 Load Guard)
500F855 Operators manual - English Language
500K478 Face level fan
500H450 Engine block heater, 110-120 volt, 850 Watt
500K007 Deluxe Cab Trim Including Radio Installation Kit
500G455 Front and Rear Worklights - CAB or CANOPY
Shipping Weight - Lbs. 23,222 23,283
Shipping Weight - Kgs. 10,555 10,583
SUGGESTED LIST PRICE $141,206 $144,777
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he
Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 535-140 USD Price Page
535-140 LOADALL HiViz U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
5678 535-140 HiViz 4WD 4WS, Sway Control and Stabilizers, 109HP 18,970 8,605 $125,145
TIRES (E)
500A441 15.5-25 SGL(12 ply) Industrial tread bias ply, Calcium Chloride Ballast 2,512 1,139 $6,904
AUXILIARY HYDRAULICS (E)
500B142 One auxiliary hydraulic service 15 7 $4,202
OPERATORS AREA (E)
500C068 Canopy with clear right hand side glass 1,100 499 $2,143
500C082 Cab with heater, tinted glass, front and rear wiper 1,150 522 $4,635
SEATS (E)
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY 50 23 $702
500D114 Air Suspension Seat -Deluxe Heated includes 2" seatbelt - CAB ONLY 77 35 $1,668
500D115 Fabric suspension seat, includes 3" Seatbelt, CAB ONLY 50 23 $773
500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY 50 23 $552
500D117 Vinyl suspension seat, includes 3" Seatbelt CANOPY ONLY 50 23 $634
CARRIAGE (E)
500E400 No Carriage- includes mounting pins 50 23 $0
500E006 48" Wide Q-Fit Carriage with 2 1/4" Fork Shaft (Use L409 Load Guard) 500 227 $1,942
500E007 66" Wide Q-Fit Framers Carriage with 2 1/4" Fork Shaft (Use L409 Load Guard) 500 227 $2,504
500P800 #N/A #N/A #N/A #N/A
500P801 #N/A #N/A #N/A #N/A
OPERATORS MANUAL (E)
500F855 Operators manual - English Language 5 2 $0
500F856 Operators manual - French 5 2 $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 535-140 USD Price Page
535-140 LOADALL HiViz U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
500K470 Front windshield guard 10 5 $466
500K465 Tilt and Telescopic Steering Column 20 9 $207
500K478 Face level fan 5 2 $194
500K034 Air Conditioning 40 18 $3,535
500K007 Deluxe Cab Trim Including Radio Installation Kit 3 1 $503
500K466 Sun blind, front windshield and roof 4 2 $226
500K477 Fire extinguisher 10 5 $217
ELECTRICAL OPTIONS
500H450 Engine block heater, 110-120 volt, 850 Watt 3 1 $231
500H053 Electric 4WD disconnect 33 15 $581
500G008 Front and Rear Roadlights (includes turn signals) - CAB 70 32 $1,043
500G009 Front and Rear Roadlights (includes turn signals) - CANOPY 70 32 $1,043
500G455 Front and Rear Worklights - CAB or CANOPY 70 32 $318
500H049 Reversing Fan 10 5 $792
HYDRAULIC OPTIONS
500J404 Hydraulic Pin Locking - Q-Fit Carriages 14 6 $434
OTHER BASE MACHINE OPTIONS
500L409 Loadguard (Use with Q-Fit carriage) 35 16 $537
500P817 Loadguard (Use with Side Tilt carriage) 35 16 $520
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 535-140 USD Price Page
535-140 LOADALL HiViz U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKETS (Q-Fit mounted)
500L129 1.75 cu. yd, 96" wide GP bucket 1,005 456 $3,376
500L809 2.0 cu. yd, 96" wide GP bucket 1,050 476 $4,852
500P105 2.25 cu. yd, 96" wide light material bucket 905 411 $3,850
500L804 2.5 cu. yd, 96" wide light material bucket 1,310 594 $4,818
500L118 1.1 cu. yd, 88" wide 6 in 1 Multipurpose bucket 1,630 739 $9,230
500E263 1.75 cu. yd, 96" wide scrap grapple, twin independent clamps 1,850 839 $7,768
500L805 #N/A #N/A #N/A #N/A
500E422 2.25 cu. yd, 96" wide trash clamp bucket, single full width clamp 2,350 1,066 $8,914
500L810 96" wide cutting edge, for use on all 96" wide buckets 165 75 PARTS
500E226 88" wide cutting edge, for use on all 88" wide buckets 150 68 PARTS
CARRIAGES (Q-Fit mounted)
500Q800 48" wide side tilt carriage, 2-1/4" fork shaft 500 227 $5,817
500Q801 66" wide side tilt framers carriage with 2-1/4" fork shaft 550 249 $6,034
500Q802 48" wide side shift carriage with 2-1/4" fork shaft 500 227 $6,252
500Q803 66" wide side shift framers carriage with 2-1/4" fork shaft 550 249 $6,514
500Q804 60" wide ITA Class III industrial carriage, (Use with M808 forks) 200 91 $2,702
CARRIAGES (Boom mounted)
500P800 #N/A #N/A #N/A #N/A
500P801 #N/A #N/A #N/A #N/A
FORK SETS
500M800 48" x 4" x 2" brick forks (2) for 2-1/4" fork shaft 250 113 $1,109
500M808 48" x 5" x 2" ITA class III forks 370 168 $1,589
500M801 48" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 318 144 $1,433
500M802 60" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 362 164 $1,685
500M803 72" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft, 6200lbs capacity at 36" load center 474 215 $1,945
500M804 48" x 2" x 2" block tines (6) for 2-1/4" fork shaft 462 210 $2,676
OTHER ATTACHMENTS
500Q805 12' truss boom, 1400lbs capacity 400 181 $2,991
500Q806 Q-Fit blank 100 45 $709
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 535-140 USD Price Page
JCB LOADALL
541-70T
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: JULY 1, 2013
Tier 4i
541-70T LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
STANDARD EQUIPMENT
GENERAL One piece unitized mainframe with rigid frame and componentized driveline
ENGINE 109 HP T4i, Dual element air cleaner,
spin-on fuel filter, Fuel/water separator, Thermostart assist, Anti-freeze protection to -35 deg. F.
TRANSMISSION JCB 4x4 Powershift, Powershuttle direction change, 2.2:1 ratio torque converter, transmission
disconnect on loader lever.
AXLES JCB MAX-TRAC with torque proportioning and outboard planetary drive.
BRAKES Internal mounted inboard on front axle, multi disc, oil immersed, Servo assisted Hydraulic
actuation, self adjusting. Independent disc type parking brake with brake on alarm
and transmission disconnect.
ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 95 amp alternator, 850 CCA low maintenance battery.
Reverse alarm
INSTRUMENTS Audible and visual warning system, Tachometer, Hourmeter, Fuel Gauge, Coolant temp. gauge,
Warning light for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,
trans oil pressure, parking brake, lift extend and tilt on single lever control.
CAB UNIT Meets SAE J231 FOPS/ SAE J1040 ROPS requirements, suspension seat with seat belt, tilt
steering column, heater with defroster vent system, windshield wipers and washers for front/rear
and roof glass, rear view and external mirrors, horn, in-cab storage. Backup alarm meets SAE J994,
Operation video.
CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt, rear view
mirror, horn, in-cab storage, backup alarm meets SAE J994, operation and parts manual
Operation video.
TIRES Choice of Options available (none standard)
TELESCOPIC BOOM Two section, 23' lift height with hydraulic parallel lift, 9,000 lbs. Maximum lift capacity.
CARRIAGE Choice of Options available (none standard)
HYDRAULICS Single lever joystick with "Loader" pattern control. Open center system with 23.2 GPM. Single auxiliary
hydraulic service.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 541-70T USD Price Page
541-70T LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5624B 5624C
CODE ITEM CAB CAB / AC
5624 541-70T 4WD 4 Wheel steer, Telescopic handler, Rigid Frame, 109 hp Turbo, Powershift
500A463 Michelin 460/70 R24 XMCL Agricultural Traction Radials
500A408 15.5-25 SGL(12 ply) Industrial tread bias ply
500B107 One auxiliary hydraulic service
500C065 Cab with heater, tinted glass, front and rear wiper
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY
500E415 48" wide Q-Fit carriage with 2-1/4" fork shaft, USE L409 Load Guard
500F606 Operators manual - English Language
500G422 Front and Rear Roadlights (includes turn signals) - CAB
500K478 Face level fan
500H452 Engine block heater, 110-120 volt, 850 Watt
500H349 Limited Slip Differential (Front Axle only)
500K148 Deluxe cab trim including radio installation kit with manual steer mode selector
500K547 Air Conditioning
500R401 Rear mounted 1 ton tow hitch
500G455 Front and Rear Worklights - CAB or CANOPY
Shipping Weight - Lbs. 17,011 17,051
Shipping Weight - Kgs. 7,732 7,750
SUGGESTED LIST PRICE $119,760 $123,672
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he
Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 541-70T USD Price Page
541-70T LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
5624 541-70T 4WD 4 Wheel steer, Telescopic handler, Rigid Frame, 109 hp Turbo, Powershift 14,485 6,570 $101,198
TIRES (E)
500A408 15.5-25 SGL(12 ply) Industrial tread bias ply 600 272 $6,904
500A412 Michelin X-Mine D2 12.00 R 24 700 318 $16,815
500A463 Michelin 460/70 R24 XMCL Agricultural Traction Radials 600 272 $7,281
AUXILIARY HYDRAULICS (E)
500B107 One auxiliary hydraulic service 15 7 $1,205
500B126 Two auxiliary hydraulic services 15 7 $1,792
OPERATORS AREA (E)
500C065 Cab with heater, tinted glass, front and rear wiper 1,150 522 $4,544
500C072 Canopy with clear right hand side glass 1,100 499 $2,100
SEATS (E)
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY 50 23 $702
500D115 Fabric suspension seat, includes 3" Seatbelt, CAB ONLY 50 23 $773
500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY 50 23 $552
500D117 Vinyl suspension seat, includes 3" Seatbelt CANOPY ONLY 50 23 $634
500D119 Air Suspension Seat -Deluxe Heated includes 2" seatbelt - CAB ONLY 77 35 $1,489
CARRIAGE (E)
500E400 No Carriage- includes mounting pins 50 23 $0
500E415 48" wide Q-Fit carriage with 2-1/4" fork shaft, USE L409 Load Guard 500 227 $1,942
OPERATORS MANUAL (E)
500F606 Operators manual - English Language 5 2 $0
500F856 Operators manual - French 5 2 $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 541-70T USD Price Page
541-70T LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
TOW HITCH
500R401 Rear mounted 1 ton tow hitch 55 25 $211
500R403 Rear mounted 10 ton hydraulic tow hitch with hydraulics and electrics 250 113 $3,007
OPERATORS COMPARTMENT OPTIONS
500K148 Deluxe cab trim including radio installation kit with manual steer mode selector 3 1 $519
500K465 Tilt and Telescopic Steering Column 20 9 $207
500K466 Sun blind, front windshield and roof 4 2 $226
500K470 Front windshield guard 10 5 $466
500K477 Fire extinguisher 10 5 $217
500K478 Face level fan 5 2 $194
500K506 Deluxe cab trim including radio installation with electrical steer mode selector 3 1 $1,299
500K547 Air conditioning 40 18 $3,535
ELECTRICAL OPTIONS
500G422 Front and Rear Roadlights (includes turn signals) - CAB 70 32 $1,043
500G438 Front and Rear Roadlights (includes turn signals) - CANOPY 70 32 $1,043
500G455 Front and Rear Worklights - CAB or CANOPY 70 32 $318
500H452 Engine block heater, 110-120 volt, 850 Watt 3 1 $231
500H475 Reversing Fan 10 5 $786
500H500 4WD disconnect 33 15 $567
HYDRAULIC OPTIONS
500J401 Hydraulic Locking Pins for Q-Fit Carriage 14 6 $434
OTHER BASE MACHINE OPTIONS
500L409 Loadguard (Use with Q-Fit carriage) 35 16 $537
500H349 Limited Slip Differential (Front Axle only) 0 0 $748
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 541-70T USD Price Page
541-70T LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKETS (Q-Fit mounted)
500E226 88" wide cutting edge, for use on all 88" wide buckets 150 68 PARTS
500E263 1.75 cu. yd, 96" wide scrap grapple, twin independent clamps 1,850 839 $7,768
500E422 2.25 cu. yd, 96" wide trash clamp bucket, single full width clamp 2,350 1,066 $8,914
500L118 1.1 cu. yd, 88" wide 6 in 1 Multipurpose bucket 1,630 739 $9,230
500L129 1.75 cu. yd, 96" wide GP bucket 1,005 456 $3,376
500L804 2.5 cu. yd, 96" wide light material bucket 1,310 594 $4,818
500L805 #N/A #N/A #N/A #N/A
500L809 2.0 cu. yd, 96" wide GP bucket 1,050 476 $4,852
500L810 96" wide cutting edge, for use on all 96" wide buckets 165 75 PARTS
500P105 2.25 cu. yd, 96" wide light material bucket 905 411 $3,850
CARRIAGES (Q-Fit mounted)
500Q800 48" wide side tilt carriage, 2-1/4" fork shaft 500 227 $5,817
500Q801 66" wide side tilt framers carriage with 2-1/4" fork shaft 550 249 $6,034
500Q802 48" wide side shift carriage with 2-1/4" fork shaft 500 227 $6,252
500Q803 66" wide side shift framers carriage with 2-1/4" fork shaft 550 249 $6,514
500Q804 60" wide ITA Class III industrial carriage, (Use with M808 forks) 200 91 $2,702
FORK SETS
500M800 48" x 4" x 2" brick forks (2) for 2-1/4" fork shaft 250 113 $1,109
500M801 48" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 318 144 $1,433
500M802 60" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 362 164 $1,685
500M803 72" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft, 6200lbs capacity at 36" load center 474 215 $1,945
500M804 48" x 2" x 2" block tines (6) for 2-1/4" fork shaft 462 210 $2,676
500M808 48" x 5" x 2" ITA class III forks 370 168 $1,589
OTHER ATTACHMENTS
500Q805 12' truss boom, 1400lbs capacity 400 181 $2,991
500Q806 Q-Fit blank 100 45 $709
500Q808 Angle broom, 96" wide 1,150 522 $10,510
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 541-70T USD Price Page
JCB LOADALL
550-140
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: JULY 1, 2013
Tier 4i
550-140 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
STANDARD EQUIPMENT
GENERAL One piece unitized mainframe with sway control, stabilizers and componentized driveline
ENGINE 109 HP T4i, Dual element air cleaner, spin-on fuel
filter, Fuel/water separator, Anti-freeze protection to -35 deg. F.
TRANSMISSION JCB 4x4 Powershift, Powershuttle direction change, 2.2:1 ratio torque converter, transmission
disconnect on loader lever.
AXLES JCB MAX-TRAC with torque proportioning and outboard planetary drive
BRAKES Internal mounted, multi-disc, oil immersed, Servo assisted hydraulic actuation, self adjusting.
Independent disc type parking brake with brake on alarm and transmission disconnect.
ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 95 amp alternator, 850 CCA low maintenance battery.
INSTRUMENTS Audible and visual warning system, Tachometer, Hourmeter, Fuel Gauge, Coolant temp. gauge,
Warning light for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,
trans oil pressure, parking brake.
CAB UNIT Meets SAE J231 FOPS/ SAE J1040 ROPS requirements, suspension seat with seat belt, tilt
steering column, heater with defroster vent system, windshield wipers and washers for front/rear
and roof glass, rear view mirror, front worklights, horn, in-cab storage. Backup alarm meets
SAE J994, Operation and part manuals, operation video.
CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt, tile steering,
rear view mirror, horn, in-cab storage, backup alarm meets SAE J994,
operation and parts manuals. Operation video.
TIRES Choice of Options available (none standard)
TELESCOPIC BOOM Three section, 44' 3" lift height with hydraulic parallel lift, 10,000 lbs. Maximum lift capacity.
Boom sections extended by hydraulic cylinders.
CARRIAGE Choice of Options available (none standard)
HYDRAULICS Open center system with 29 GPM, single auxiliary hydraulic service.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 550-140 USD Price Page
550-140 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5625A 5625B
CODE ITEM CANOPY CAB
5625
500A469 17.5-25 SGL(16 ply) Industrial tread bias ply, Calcium Chloride Ballast
500B466 One auxiliary hydraulic service
500C073 Canopy with clear right hand side glass
500C080 Cab with heater, tinted glass, front and rear wiper
500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY
500E414 66" wide Q-Fit Framers carriage with 2-1/4" fork shaft, (Use L409 Load Guard)
500F855 Operators manual - English Language
500K478 Face level fan
500H450 Engine block heater, 110-120 volt, 850 Watt
500K157 Deluxe cab trim including radio installation kit with manual steer mode selector
500G455 Front and Rear Worklights - CAB or CANOPY
Shipping Weight - Lbs. 29,378 29,439
Shipping Weight - Kgs. 13,354 13,381
SUGGESTED LIST PRICE $158,240 $161,828
550-140 4WD 4 Wheel steer, Telescopic handler with sway control and Stabilizers, 109 hp
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he
Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 550-140 USD Price Page
550-140 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
5625 24,449 11,090 $140,080
TIRES (E)
500A469 17.5-25 SGL(16 ply) Industrial tread bias ply, Calcium Chloride Ballast 3,189 1,447 $8,441
500A473 17.5-25 SGL(12 ply) Industrial tread bias ply, NO BALLAST 3,189 1,447 $6,951
AUXILIARY HYDRAULICS (E)
500B466 One auxiliary hydraulic service 15 7 $4,202
OPERATORS AREA (E)
500C073 Canopy with clear right hand side glass 1,100 499 $2,143
500C080 Cab with heater, tinted glass, front and rear wiper 1,150 522 $4,635
SEATS (E)
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY 50 23 $702
500D114 Air Suspension Seat -Deluxe Heated includes 2" seatbelt - CAB ONLY 77 35 $1,668
500D115 Fabric suspension seat, includes 3" Seatbelt, CAB ONLY 50 23 $773
500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY 50 23 $552
500D117 Vinyl suspension seat, includes 3" Seatbelt CANOPY ONLY 50 23 $634
CARRIAGE (E)
500E400 No Carriage- includes mounting pins 50 23 $0
500E413 48" wide Q-Fit carriage with 2-1/4" fork shaft, (Use L409 Load Guard) 500 227 $1,942
500E414 66" wide Q-Fit Framers carriage with 2-1/4" fork shaft, (Use L409 Load Guard) 500 227 $2,504
500P800 #N/A #N/A #N/A #N/A
500P801 #N/A #N/A #N/A #N/A
500P802 72" Boom mounted swing carriage with 2-1/4" fork shaft 1,025 465 $8,467
OPERATORS MANUAL (E)
500F855 Operators manual - English Language 5 2 $0
500F856 Operators manual - French 5 2 $0
550-140 4WD 4 Wheel steer, Telescopic handler with sway control and Stabilizers, 109 hp
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 550-140 USD Price Page
550-140 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
500K470 Front windshield guard 10 5 $466
500K478 Face level fan 5 2 $194
500K133 Air Conditioning 40 18 $3,535
500K157 Deluxe cab trim including radio installation kit with manual steer mode selector 3 1 $520
500K508 Deluxe cab trim including radio installation kit with electrical steer mode selector 3 1 $1,299
500K466 Sun blind, front windshield and roof 4 2 $226
500K477 Fire extinguisher 10 5 $217
ELECTRICAL OPTIONS
500H450 Engine block heater, 110-120 volt, 850 Watt 3 1 $231
500H316 4WD disconnect 33 15 $581
500G410 Front and Rear Roadlights (includes turn signals) - CAB 70 32 $1,043
500G429 Front and Rear Roadlights (includes turn signals) - CANOPY 70 32 $1,043
500G455 Front and Rear Worklights - CAB or CANOPY 70 32 $318
500H570 Reversing Fan 10 5 $786
HYDRAULIC OPTIONS
500J404 Hydraulic Pin Locking - Q-Fit Carriages 14 6 $434
OTHER BASE MACHINE OPTIONS
500L409 Loadguard (Use with Q-Fit carriage) 35 16 $537
500P817 Loadguard (Use with Side Tilt carriage) 35 16 $520
Select Optional Equipment as desired within limitations if indicated.
A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET
ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN
3441.
All prices and specifications subject to change without notice page 5 of 6 550-140 USD Price Page
550-140 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKETS (Q-Fit mounted)
500L129 1.75 cu. yd, 96" wide GP bucket 1,005 456 $3,376
500L809 2.0 cu. yd, 96" wide GP bucket 1,050 476 $4,852
500P105 2.25 cu. yd, 96" wide light material bucket 905 411 $3,850
500L804 2.5 cu. yd, 96" wide light material bucket 1,310 594 $4,818
500L118 1.1 cu. yd, 88" wide 6 in 1 Multipurpose bucket 1,630 739 $9,230
500E263 1.75 cu. yd, 96" wide scrap grapple, twin independent clamps 1,850 839 $7,768
500L805 #N/A #N/A #N/A #N/A
500E422 2.25 cu. yd, 96" wide trash clamp bucket, single full width clamp 2,350 1,066 $8,914
500L810 96" wide cutting edge, for use on all 96" wide buckets 165 75 PARTS
500E226 88" wide cutting edge, for use on all 88" wide buckets 150 68 PARTS
CARRIAGES (Q-Fit mounted)
500Q800 48" wide side tilt carriage, 2-1/4" fork shaft 500 227 $5,817
500Q801 66" wide side tilt framers carriage with 2-1/4" fork shaft 550 249 $6,034
500Q802 48" wide side shift carriage with 2-1/4" fork shaft 500 227 $6,252
500Q803 66" wide side shift framers carriage with 2-1/4" fork shaft 550 249 $6,514
500Q804 60" wide ITA Class III industrial carriage, (Use with M808 forks) 200 91 $2,702
CARRIAGES (Boom mounted)
500P800 #N/A #N/A #N/A #N/A
500P801 #N/A #N/A #N/A #N/A
500P802 72" Boom mounted swing carriage with 2-1/4" fork shaft 1,025 465 $8,467
FORK SETS
500M800 48" x 4" x 2" brick forks (2) for 2-1/4" fork shaft 250 113 $1,109
500M808 48" x 5" x 2" ITA class III forks 370 168 $1,589
500M801 48" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 318 144 $1,433
500M802 60" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 362 164 $1,685
500M803 72" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft, 6200lbs capacity at 36" load center 474 215 $1,945
500M804 48" x 2" x 2" block tines (6) for 2-1/4" fork shaft 462 210 $2,676
OTHER ATTACHMENTS
500Q805 12' truss boom, 1400lbs capacity 400 181 $2,991
500Q806 Q-Fit blank 100 45 $709
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 550-140 USD Price Page
JCB LOADALL
550-170
JCB Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: JULY 1, 2013
Tier 4i
550-170 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
STANDARD EQUIPMENT
GENERAL One piece unitized mainframe with sway control, stabilizers and componentized driveline
ENGINE 109 HP T4i, Dual element air cleaner, spin-on fuel
filter, Fuel/water separator, Thermostart assist, Anti-freeze protection to -35 deg. F.
TRANSMISSION JCB 4x4 Powershift, Powershuttle direction change, 2.2:1 ratio torque converter, transmission
disconnect on loader lever.
AXLES JCB MAX-TRAC with torque proportioning and outboard planetary drive
BRAKES Internal mounted, multi-disc, oil immersed, Servo assisted hydraulic actuation, self adjusting.
Independent disc type parking brake with brake on alarm and transmission disconnect.
ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 95 amp alternator, 850 CCA low maintenance battery.
INSTRUMENTS Audible and visual warning system, Tachometer, Hourmeter, Fuel Gauge, Coolant temp. gauge,
Warning light for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,
trans oil pressure, parking brake.
CAB UNIT Meets SAE J231 FOPS/ SAE J1040 ROPS requirements, suspension seat with seat belt, tilt
steering column, heater with defroster vent system, windshield wipers and washers for front/rear
and roof glass, rear view mirror, horn, in-cab storage. Backup alarm meets SAE J994,
Operation and part manuals, operation video.
CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt, tile steering,
column, rear view mirror, horn, in-cab storage, backup alarm meets SAE J994, operation and
parts manuals. Operation video.
TIRES 17.5 - 25 (16 ply) Industrial Tread Bias Ply - NO BALLAST
TELESCOPIC BOOM Three section, 54' 9" lift height with hydraulic parallel lift, 10,000 lbs. Maximum lift capacity. Boom
sections extended by hydraulic cylinders.
CARRIAGE Choice of Options available (none standard)
HYDRAULICS Open center system with 42.8 GPM, single auxiliary hydraulic service.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)
All prices and specifications subject to change without notice page 2 of 6 550-170 USD Price Page
550-170 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 5626A 5626B
CODE ITEM CANOPY CAB
5626
500A435 17.5-25 (16 ply) Industrial Tread Bias ply, NO BALLAST
500B474 One servo auxiliary hydraulic service
500C074 Canopy with clear right hand side glass
500C079 Cab with heater, tinted glass, front and rear wiper
500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY
500E400 No Carriage- includes mounting pins
500P803 66" wide Q-Fit Framers carriage with 2-1/4" fork shaft
500F855 Operators manual - English Language
500K478 Face level fan
500H450 Engine block heater, 110-120 volt, 850 Watt
500K166 Deluxe cab trim including radio installation kit with manual steer mode selector
500G455 Front and Rear Worklights - CAB or CANOPY
500G434 Front and Rear Roadlights (includes turn signals) - CAB
500G471 Front and Rear Roadlights (includes turn signals) - CANOPY
Shipping Weight - Lbs. 31,004 31,065
Shipping Weight - Kgs. 14,093 14,120
SUGGESTED LIST PRICE $173,348 $176,936
550-170 4WD / 4WS Telescopic Handler with Sway Control and Stabilizers, 109hp
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he
Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 550-170 USD Price Page
550-170 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
5626 27,494 12,471 $149,866
TIRES (E)
500A435 17.5-25 (16 ply) Industrial Tread Bias ply, NO BALLAST 1,650 748 $11,384
AUXILIARY HYDRAULICS (E)
500B474 One servo auxiliary hydraulic service 15 7 $4,473
OPERATORS AREA (E)
500C074 Canopy with clear right hand side glass 1,100 499 $2,143
500C079 Cab with heater, tinted glass, front and rear wiper 1,150 522 $4,635
SEATS (E)
500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY 50 23 $702
500D114 Air Suspension Seat -Deluxe Heated includes 2" seatbelt - CAB ONLY 77 35 $1,668
500D115 Fabric suspension seat, includes 3" Seatbelt, CAB ONLY 50 23 $773
500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY 50 23 $552
500D117 Vinyl suspension seat, includes 3" Seatbelt CANOPY ONLY 50 23 $634
CARRIAGE (E)
500E400 No Carriage- includes mounting pins 50 23 $0
500E425 48" wide Q-Fit carriage with 2-1/4" fork shaft, NEW FACTORY BUILT ORDERS (Use L409 Load Guard) 500 227 $1,942
500P803 66" wide Q-Fit Framers carriage with 2-1/4" fork shaft 500 227 $3,568
500P804 48" Boom mounted side tilt Q-fit carriage with 2-1/4" fork shaft, (Use P817 loadguard) 650 295 $8,039
500P805 66" Boom mounted Framers side tilt Q-fit carriage with 2-1/4" fork shaft, (Use P817 loadguard) 700 318 $8,374
500P806 72" Boom mounted swing carriage with 2-1/4" fork shaft 1,025 465 $8,467
OPERATORS MANUAL (E)
500F855 Operators manual - English Language 5 2 $0
500F856 Operators manual - French 5 2 $0
550-170 4WD / 4WS Telescopic Handler with Sway Control and Stabilizers, 109hp
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 550-170 USD Price Page
550-170 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OPERATORS COMPARTMENT OPTIONS
500K470 Front windshield guard 10 5 $466
500K478 Face level fan 5 2 $194
500K133 Air Conditioning 40 18 $3,535
500K166 Deluxe cab trim including radio installation kit with manual steer mode selector 3 1 $520
500K535 Deluxe cab trim including radio installation kit with electrical steer mode switch 3 1 $1,299
500K466 Sun blind, front windshield and roof 4 2 $226
500K477 Fire extinguisher 10 5 $217
ELECTRICAL OPTIONS **
500H450 Engine block heater, 110-120 volt, 850 Watt 3 1 $231
500H518 Electrical 4 wheel drive disconnect 35 16 $580
500G434 Front and Rear Roadlights (includes turn signals) - CAB 70 32 $1,043
500G471 Front and Rear Roadlights (includes turn signals) - CANOPY 70 32 $1,043
500G455 Front and Rear Worklights - CAB or CANOPY 70 32 $318
HYDRAULIC OPTIONS
500J405 Hydraulic Pin Locking 14 6 $434
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 550-170 USD Price Page
550-170 LOADALL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JULY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKETS (Q-Fit mounted)
500L129 1.75 cu. yd, 96" wide GP bucket 1,005 456 $3,376
500L809 2.0 cu. yd, 96" wide GP bucket 1,050 476 $4,852
500P105 2.25 cu. yd, 96" wide light material bucket 905 411 $3,850
500L804 2.5 cu. yd, 96" wide light material bucket 1,310 594 $4,818
500L118 1.1 cu. yd, 88" wide 6 in 1 Multipurpose bucket 1,630 739 $9,230
500E263 1.75 cu. yd, 96" wide scrap grapple, twin independent clamps 1,850 839 $7,768
500L805 #N/A #N/A #N/A #N/A
500E422 2.25 cu. yd, 96" wide trash clamp bucket, single full width clamp 2,350 1,066 $8,914
500L810 96" wide cutting edge, for use on all 96" wide buckets 165 75 PARTS
500E226 88" wide cutting edge, for use on all 88" wide buckets 150 68 PARTS
CARRIAGES (Q-Fit mounted)
500Q800 48" wide side tilt carriage, 2-1/4" fork shaft 500 227 $5,817
500Q801 66" wide side tilt framers carriage with 2-1/4" fork shaft 550 249 $6,034
500Q802 48" wide side shift carriage with 2-1/4" fork shaft 500 227 $6,252
500Q803 66" wide side shift framers carriage with 2-1/4" fork shaft 550 249 $6,514
500Q804 60" wide ITA Class III industrial carriage, (Use with M808 forks) 200 91 $2,702
CARRIAGES (Boom mounted)
500P804 48" Boom mounted side tilt Q-fit carriage with 2-1/4" fork shaft, (Use P817 loadguard) 650 295 $8,039
500P805 66" Boom mounted Framers side tilt Q-fit carriage with 2-1/4" fork shaft, (Use P817 loadguard) 700 318 $8,374
500P807 72" Boom mounted swing carriage with 2-1/4" fork shaft 1,025 465 $8,803
FORK SETS
500M800 48" x 4" x 2" brick forks (2) for 2-1/4" fork shaft 250 113 $1,109
500M808 48" x 5" x 2" ITA class III forks 370 168 $1,589
500M801 48" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 318 144 $1,433
500M802 60" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 362 164 $1,685
500M803 72" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft, 6200lbs capacity at 36" load center 474 215 $1,945
500M804 48" x 2" x 2" block tines (6) for 2-1/4" fork shaft 462 210 $2,676
OTHER ATTACHMENTS
500Q805 12' truss boom, 1400lbs capacity 400 181 $2,991
500Q806 Q-Fit blank 100 45 $709
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 550-170 USD Price Page
ROUGH TERRAIN FORKLIFT
JCB ROUGH TERRAIN FORKLIFT
930 RTFL
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
930 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
GENERAL One piece unitized mainframe with componentized driveline
ENGINE 4.4L (268 CID), 74 SAE GROSS HP, Turbo, Dual element air cleaner, spin-on fuel
filter, Fuel/water separator, Engine block heater, Thermostart assist, Anti-freeze protection to -35 deg. F.
TRANSMISSION - 2WD JCB 4x2 Synchroshuttle, synchronized shifting in all gears, powershuttle direction change, 2.2:1 ratio
torque converter.
TRANSMISSION - 4WD JCB 4x4 Synchroshuttle, synchronized shifting in all gears, powershuttle direction change, 2WD/4WD
Selection. 2.2:1 ratio torque converter.
AXLES - 2WD Front JCB MAX-TRAC with torque proportioning and outboard planetary drive.
AXLES - 4WD Front and rear JCB MAX-TRAC with torque proportioning and outboard planetary drive.
BRAKES Internal mounted inboard on front axle, multi disc, oil immersed, hydraulic actuation, self-adjusting
Independent disc type parking brake with brake on alarm and transmission disconnect.
ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 95 amp alternator, 850 CCA low maintenance battery.
INSTRUMENTS Audible and visual warning system, hourmeter, Fuel Gauge, Coolant temp. gauge, warning lights
for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,
trans oil pressure, parking brake, indicators for lights, hazard lights, turn signals (if fitted).
CAB UNIT Meets ANSI B56.6 FOPS, deluxe trim, fixed seat with seat belt. Heater with defroster vent system,
windshield wipers and washers for front/rear and roof glass, front worklight, horn, in-cab storage,
3" seatbelt. Backup alarm meets SAE J994, Operation manual.
CANOPY UNIT Meets ANSI B56.6 FOPS, fixed seat with seat belt, front worklights, horn, in-cab storage,
3" seatbelt, backup alarm meets SAE J994, Operation manual (no rear glass, no rear fenders).
TIRES - 2WD Front: 15.5 - 25 (8 ply) Sure Grip Lug, Rear: 14.5/75 - 16.1 (10 ply) Laborer.
TIRES - 4WD Front: 15.5 - 25 (8 ply) Sure Grip Lug, Rear: 14 - 17.5 - (10 ply) Traction.
HYDRAULICS Open center system with 14.5 GPM.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - RTFL (LISTED SEPARATELY FOR ALL RTFLS)
All prices and specifications subject to change without notice page 2 of 6 930 RTFL USD Price Page
930 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
EFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD & MAST/CARRIAGE COMBINATIONS
PACKAGE BUILD CODE: 7123A 7124A
SALES CANOPY CANOPY
CODE ITEM 2WD 4WD
7123 930 2WD 6000lb capacity Straight Mast Rough Terrain Forklift
7124 930 4WD 6000lb capacity Straight Mast Rough Terrain Forklift
700A111 Front: 15.5-25 (8 ply) Industrial, Rear: 14- 17.5(10 ply) Laborer
700A205 Front: 15.5-25 (12 ply) Industrial, Rear: 14-17.5 (10 ply) Traction
700B225 No Mast
700C126 Canopy with roof glass, wiper and front screen guard
700D135
700E100 No Carriage
700F116 Operators manual
700R101 Vinyl static seat for CANOPY
Shipping Weight - Lbs. 11,155 11,595
Shipping Weight - Kgs. 5,060 5,259
SUGGESTED LIST PRICE (EXCLUDES MAST AND CARRIAGE) $54,858 $64,992
Sideshift hydraulics and one auxiliary hydraulic circuit (May require hose kit depending on application.
See hose kits in Dealer Fit section)
Select one of the following machine PACKAGE BUILDS AND a Mast and Carriage COMBO code from the section 4 from page 6. To
provide Dealers with our best availability and greatest flexibility, Mast and Carriage Combinations are installed to order.
If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build
Sections following.
All prices and specifications subject to change without notice page 3 of 6 930 RTFL USD Price Page
930 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
7123 9,380 4,264 $45,955
7124 930 4WD 6000lb capacity Straight Mast Rough Terrain Forklift 9,720 4,418 $56,279
TIRES (E)
2-Wheel Drive Tire Sets
700A111 Front: 15.5-25 (8 ply) Industrial, Rear: 14- 17.5(10 ply) Laborer 600 273 $4,950
4-Wheel Drive Tire Sets
700A205 Front: 15.5-25 (12 ply) Industrial, Rear: 14-17.5 (10 ply) Traction 700 318 $4,761
NO MAST (E)
700B225 No Mast 0 0 $0
OPERATORS AREA (E)
700C126 Canopy with roof glass, wiper and front screen guard 1,100 500 $3,187
700C123 Cab with heater, tinted glass, roof glass and rear window wiper 1,150 523 $6,077
HYDRAULICS (E)
700D134 Sideshift hydraulics 50 23 $197
700D135 50 23 $597
NO CARRIAGE (E)
700E100 No Carriage 0 0 $0
OPERATORS MANUAL (E)
700F116 Operators manual 5 2 $0
700F117 Operators manual French 5 2 $0
SEATS (E)
700R101 Vinyl static seat for CANOPY 20 9 $169
700R103 Vinyl Suspension Seat for CANOPY 65 30 $429
700R102 Cloth Static Seat for CAB 20 9 $169
700R104 Cloth Suspension Seat for CAB 65 30 $429
Sideshift hydraulics and one auxiliary hydraulic circuit (May require hose kit depending on application.
See hose kits in Dealer Fit section)
930 2WD 6000lb capacity Straight Mast Rough Terrain Forklift
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 930 RTFL USD Price Page
930 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OTHER OPERATORS COMPARTMENT OPTIONS
700K105 Exterior Mirrors 8 4 $240
700K106 Rear View Mirror (internal) - - $32
700K121 Face level fan 5 2 $189
700K129 Air Conditioning 60 27 $5,628
OTHER ELECTRICAL OPTIONS
700G107 Front and Rear Roadlights including Turn Signals 42 19 $810
OTHER BASE MACHINE OPTIONS
700R107 Engine pre cleaner 15 7 $152
700N107 Rear fenders 40 18 $445
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 930 RTFL USD Price Page
930 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
MAST AND CARRIAGE COMBINATIONS
700XC05 22' Clearview, Triplex w/ 66" Floating Shaft Carriage 2,913 1,324 $13,946
700XC07 22' Clearview, Triplex w/ 60" Class III ITA Carriage 2,963 1,347 $13,470
700XC06 22' Clearview, Triplex w/ 84" Floating Shaft Carriage 2,983 1,356 $14,652
700XC08 22' Clearview, Triplex w/ 72" Class III ITA Carriage 3,037 1,380 $14,288
700XC01 15' Freelift, Triplex w/ 66" Floating Shaft Carriage 2,573 1,170 $15,730
700XC03 15' Freelift, Triplex w/ 60" Class III ITA Carraige 2,622 1,192 $15,365
700XC04 15' Freelift, Triplex w/ 72" Class III ITA Carraige 2,697 1,226 $16,688
700XC02 15' Freelift, Triplex w/ 84" Floating Shaft Carriage 2,644 1,202 $17,057
700XC09 22' Freelift, Triplex w/ 66" Floating Shaft Carriage 2,974 1,352 $16,699
700XC10 22' Freelift, Triplex w/ 84" Floating Shaft Carriage 3,045 1,384 $17,750
700XC11 22' Freelift Triplex, w/ 60" Class III ITA Carriage 3,025 1,375 $17,368
700XC12 22' Freelift Triplex, w/ 72" Class III ITA Carriage 3,098 1,408 $18,531
FORK SETS
700M805 48" x 4" x 2" pallet forks (2) for 2" fork shaft 250 114 $1,059
700M808 48" x 5" x 2" ITA class III forks 370 168 $1,589
700M810 72" x 5" x 2" ITA class III forks 10,000lb cap. 500 227 $1,732
700M512 60" x 4" x 2" pallet forks (2) for 2" fork shaft 8,000lb cap. 282 128 $1,374
700M806 72" x 5" x 2" pallet forks (2) for 2" fork shaft, 5060lbs capacity at 36" load center 374 170 $1,710
700M807 48" x 2" x 1.5" block tines (6) for 2" fork shaft 336 153 $2,492
HOSE KITS
700XE10 Single Internal Hose Kit for 6,000lb - 22' Clearview Masts 44 20 $1,339
700XE11 Single Internal Hose Kit for 6,000lb - 15' FL Masts 25 11 $1,205
700XE12 Single Internal Hose Kit for 6,000lb - 22' FL Masts 30 14 $1,339
Select ONE mast and carriage combination and ONE fork set per machine order
All prices and specifications subject to change without notice page 6 of 6 930 RTFL USD Price Page
SECTION 3 - DEALER FIT
JCB ROUGH TERRAIN FORKLIFT
940 RTFL
JCB, Inc. North American
PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
940 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
GENERAL One piece unitized mainframe with componentized driveline
ENGINE 4.4L (268 CID), 74 SAE GROSS HP, Turbo, Dual element air cleaner, spin-on fuel
filter, Fuel/water separator, Thermostart assist, Engine block heater, Anti-freeze protection to -35 deg. F.
TRANSMISSION - 2WD JCB 4x2 Synchroshuttle, synchronized shifting in all gears, powershuttle direction change, 2.2:1 ratio
torque converter.
TRANSMISSION - 4WD JCB 4x4 Synchroshuttle, synchronized shifting in all gears, powershuttle direction change, 2WD/4WD
Selection. 2.2:1 ratio torque converter.
AXLES - 2WD Front JCB MAX-TRAC with torque proportioning and outboard planetary drive.
AXLES - 4WD Front and rear JCB MAX-TRAC with torque proportioning and outboard planetary drive.
BRAKES Internal mounted inboard on front axle, multi disc, oil immersed, hydraulic actuation, self-adjusting
Independent disc type parking brake with brake on alarm and transmission disconnect.
ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 95 amp alternator, 850 CCA low maintenance battery.
INSTRUMENTS Audible and visual warning system, hourmeter, Fuel Gauge, Coolant temp. gauge, warning lights
for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,
trans oil pressure, parking brake, indicators for lights, hazard lights, turn signals (if fitted).
CAB UNIT Meets ANSI B56.6 FOPS, deluxe trim, fixed seat with seat belt. Heater with defroster vent system,
windshield wipers and washers for front/rear and roof glass, front worklight, horn, in-cab storage,
3" seatbelt. Backup alarm meets SAE J994, Operation manual.
CANOPY UNIT Meets ANSI B56.6 FOPS, fixed seat with seat belt, front worklights, horn, in-cab storage, 3" seatbelt,
backup alarm meets SAE J994, Operation manual (no rear glass, no rear fenders).
TIRES - 2WD Front: 15.5 - 25 (12 ply) Sure Grip Lug, Rear: 12.5/80 - 18 (10 ply)
TIRES - 4WD Front: 15.5 - 25 (12 ply) Sure Grip Lug, Rear: 14 - 17.5 - (10 ply) Traction.
HYDRAULICS Open center system with 14.5 GPM.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - RTFL (LISTED SEPARATELY FOR ALL RTFLS)
All prices and specifications subject to change without notice page 2 of 6 940 RTFL USD Price Page
940 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 7125A 7126A
SALES CANOPY CANOPY
CODE ITEM 2WD 4WD
7125 940 2WD 8000lb capacity Straight Mast Rough Terrain Forklift
7126 940 4WD 8000lb capacity Straight Mast Rough Terrain Forklift
700A111 Front: 15.5-25 (8 ply) Industrial, Rear: 14- 17.5(10 ply) Laborer
700A205 Front: 15.5-25 (12 ply) Industrial, Rear: 14-17.5 (10 ply) Traction
700B226 No Mast
700C126 700C126
700D135
700E100 No Carriage
700F118 Operators Manual US
700R101 Vinyl static seat for CANOPY
Shipping Weight - Lbs. 11,697 12,137
Shipping Weight - Kgs. 5,306 5,505
SUGGESTED LIST PRICE (EXCLUDES MAST AND CARRIAGE) $60,334 $70,110
Sideshift hydraulics and one auxiliary hydraulic circuit (May require hose kit depending on application. See
hose kits in Dealer Fit section)
Select one of the following machine PACKAGE BUILDS AND a Mast and Carriage COMBO code from the section 4 from page 6. To
provide Dealers with our best availability and greatest flexibility, Mast and Carriage Combinations are installed to order.
If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build
Sections following.
All prices and specifications subject to change without notice page 3 of 6 940 RTFL USD Price Page
940 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
7125 940 2WD 8000lb capacity Straight Mast Rough Terrain Forklift 9,922 4,510 $51,431
7126 940 4WD 8000lb capacity Straight Mast Rough Terrain Forklift 10,262 4,665 $61,396
TIRES (E)
2-Wheel Drive Tire Sets
700A111 Front: 15.5-25 (8 ply) Industrial, Rear: 14- 17.5(10 ply) Laborer 600 273 $4,950
4-Wheel Drive Tire Sets
700A205 Front: 15.5-25 (12 ply) Industrial, Rear: 14-17.5 (10 ply) Traction 700 318 $4,761
NO MAST (E)
700B226 No Mast 0 0 $0
OPERATORS AREA (E)
700C126 Canopy with roof glass, wiper and front screen guard 1,100 500 $3,187
700C123 Cab with heater, tinted glass, roof glass and rear window wiper 1,150 523 $6,077
HYDRAULICS (E)
700D202 Sideshift hydraulics 50 23 $195
700D135 50 23 $597
NO CARRIAGE (E)
700E100 No Carriage 0 0 $0
OPERATORS MANUAL (E)
700F118 Operators Manual US 5 2 $0
700F119 Operators Manual French 5 2 $0
SEATS (E)
700R101 Vinyl static seat for CANOPY 20 9 $169
700R103 Vinyl Suspension Seat for CANOPY 65 30 $429
700R102 Cloth Static Seat for CAB 20 9 $169
700R104 Cloth Suspension Seat for CAB 65 30 $429
Sideshift hydraulics and one auxiliary hydraulic circuit (May require hose kit depending on application. See
hose kits in Dealer Fit section)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 940 RTFL USD Price Page
940 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
OTHER OPERATORS COMPARTMENT OPTIONS
700K105 Exterior Mirrors 8 4 $240
700K106 Rear View Mirror (internal) 0 0 $32
700K121 Face level fan 5 2 $189
700K130 Air Conditioning 60 27 $5,628
OTHER ELECTRICAL OPTIONS
700G107 Front and Rear Roadlights including Turn Signals 42 19 $810
OTHER BASE MACHINE OPTIONS
700R109 Engine pre cleaner 15 7 $152
700N107 Rear fenders 40 18 $445
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 940 RTFL USD Price Page
940 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
MAST AND CARRIAGE COMBINATIONS
700XD05 22' Clearview, Triplex w/ 66" Floating Shaft Carriage 4,193 1,906 $17,544
700XD07 22' Clearview, Triplex w/ 60" Class III ITA Carriage 4,220 1,918 $17,558
700XD06 22' Clearview, Triplex w/ 84" Floating Shaft Carriage 4,268 1,940 $18,628
700XD08 22' Clearview, Triplex w/ 72" Class III ITA Carriage 4,294 1,952 $18,794
700XD01 15' Freelift, Triplex w/ 66" Floating Shaft Carriage 3,342 1,519 $18,556
700XD03 15' Freelift, Triplex w/ 60" Class III ITA Carraige 3,374 1,534 $18,929
700XD04 15' Freelift, Triplex w/ 72" Class III ITA Carraige 3,448 1,567 $19,823
700XD02 15' Freelift, Triplex w/ 84" Floating Shaft Carriage 3,417 1,553 $19,282
700XD09 22' Freelift, Triplex w/ 66" Floating Shaft Carriage 3,943 1,792 $20,631
700XD11 22' Freelift Triplex, w/ 60" Class III ITA Carriage 3,975 1,807 $20,647
700XD10 22' Freelift, Triplex w/ 84" Floating Shaft Carriage 4,018 1,826 $21,890
700XD12 22' Freelift Triplex, w/ 72" Class III ITA Carriage 4,049 1,840 $22,062
FORK SETS
700M808 48" x 5" x 2" ITA class III forks 370 168 $1,589
700M810 72" x 5" x 2" ITA class III forks 10,000lb cap. 500 227 $1,732
700M801 48" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 318 145 $1,433
700M802 60" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 10,000lb cap. 362 165 $1,685
700M803 72" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft, 6200lbs capacity at 36" load center 474 215 $1,944
700M804 48" x 2" x 2" block tines (6) for 2-1/4" fork shaft 462 210 $2,598
HOSE KITS
700XE13 Single Internal Hose Kit for 8,000 & 10,000lb - 22' Clearview Masts 44 20 $1,339
700XE14 Single Internal Hose Kit for 8,000 & 10,000lb - 15' FL Masts 25 11 $1,205
700XE15 Single Internal Hose Kit for 8,000 & 10,000lb - 22' FL Masts 30 14 $1,339
Select ONE mast and carriage combination and ONE fork set per machine order
All prices and specifications subject to change without notice page 6 of 6 940 RTFL USD Price Page
SECTION 3 - DEALER FIT
JCB ROUGH TERRAIN FORKLIFT
950 RTFL
JCB, Inc. North American
PRICE LIST
in U.S. Dollars
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
950 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
GENERAL One piece unitized mainframe with componentized driveline
ENGINE 4.4L (268 CID), 84 SAE GROSS HP, Turbo, Dual element air cleaner, spin-on fuel
filter, Fuel/water separator, Thermostart assist, Engine block heater, Anti-freeze protection to -35 deg. F.
TRANSMISSION - 4WD JCB 4x4 Synchroshuttle, synchronized shifting in all gears, powershuttle direction change, 2WD/4WD
Selection. 2.2:1 ratio torque converter.
AXLES - 4WD Front and rear JCB MAX-TRAC with torque proportioning and outboard planetary drive.
BRAKES Internal mounted inboard on front axle, multi disc, oil immersed, hydraulic actuation, self-adjusting
Independent disc type parking brake with brake on alarm and transmission disconnect.
ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 95 amp alternator, 850 CCA low maintenance battery.
INSTRUMENTS Audible and visual warning system, hourmeter, Fuel Gauge, Coolant temp. gauge, warning lights
for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,
trans oil pressure, parking brake, indicators for lights, hazard lights, turn signals (if fitted).
CAB UNIT Meets ANSI B56.6 FOPS, deluxe trim, fixed seat with seat belt. Heater with defroster vent system,
windshield wipers and washers for front/rear and roof glass, front worklight, horn, in-cab storage,
3" seatbelt. Backup alarm meets SAE J994, Operation manual.
CANOPY UNIT Meets ANSI B56.6 FOPS, fixed seat with seat belt, front worklights, horn, in-cab storage, 3" seatbelt,
backup alarm meets SAE J994, Operation manual (no rear glass, no rear fenders).
TIRES - 4WD Front: 15.5 - 25 (12 ply) Sure Grip Lug, Rear: 14 - 17.5 - (10 ply) Traction.
HYDRAULICS Open center system with 14.5 GPM.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - RTFL (LISTED SEPARATELY FOR ALL RTFLS)
All prices and specifications subject to change without notice page 2 of 6 950 RTFL USD Price Page
950 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 7227A
SALES CANOPY
CODE ITEM 4WD
7227 950 4WD 10000lb capacity Straight Mast Rough Terrain Forklift
700A205 Front: 15.5-25 (12 ply) Industrial, Rear: 14-17.5 (10 ply) Traction
700B226 No Mast
700C126 Canopy with roof glass, wiper and front screen guard
700D135
700E100 No Carriage
700F118 Operators Manual US
700R101 Vinyl static seat for CANOPY
700R109 Engine pre cleaner
SUGGESTED LIST PRICE (EXCLUDES MAST AND CARRIAGE) $77,287
Sideshift hydraulics and one auxiliary hydraulic circuit (May require hose kit depending on application. See
hose kits in Dealer Fit section)
Select one of the following machine PACKAGE BUILDS AND a Mast and Carriage COMBO code from the section 4 from page 6. To
provide Dealers with our best availability and greatest flexibility, Mast and Carriage Combinations are installed to order.
If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build
Sections following.
All prices and specifications subject to change without notice page 3 of 6 950 RTFL USD Price Page
950 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
7227 950 4WD 10000lb capacity Straight Mast Rough Terrain Forklift $68,422
TIRES (E)
4-Wheel Drive Tire Sets
700A205 Front: 15.5-25 (12 ply) Industrial, Rear: 14-17.5 (10 ply) Traction $4,761
NO MAST (E)
700B226 No Mast $0
OPERATORS AREA (E)
700C126 Canopy with roof glass, wiper and front screen guard $3,187
700C123 Cab with heater, tinted glass, roof glass and rear window wiper $6,077
HYDRAULICS (E)
700D202 Sideshift hydraulics $195
700D135 $597
NO CARRIAGE (E)
700E100 No Carriage $0
OPERATORS MANUAL (E)
700F118 Operators Manual US $0
700F119 Operators Manual French $0
SEATS (E)
700R101 Vinyl static seat for CANOPY $169
700R103 Vinyl Suspension Seat for CANOPY $429
700R102 Cloth Static Seat for CAB $169
700R104 Cloth Suspension Seat for CAB $429
Sideshift hydraulics and one auxiliary hydraulic circuit (May require hose kit depending on application. See hose
kits in Dealer Fit section)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
All prices and specifications subject to change without notice page 4 of 6 950 RTFL USD Price Page
950 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OTHER OPERATORS COMPARTMENT OPTIONS
700K105 Exterior Mirrors $240
700K106 Rear View Mirror (internal) $32
700K121 Face level fan $189
700K130 Air Conditioning $5,628
OTHER ELECTRICAL OPTIONS
700G107 Front and Rear Roadlights including Turn Signals $810
OTHER BASE MACHINE OPTIONS
700R109 Engine pre cleaner $152
700N119 Rear fenders $445
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 950 RTFL USD Price Page
950 RTFL FORKLIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
MAST AND CARRIAGE COMBINATIONS
700XF10 22' Clearview, Triplex w/ 66" Floating Shaft Carriage $19,308
700XF12 22' Clearview, Triplex w/ 60" Class III ITA Carriage $19,330
700XF11 22' Clearview, Triplex w/ 84" Floating Shaft Carriage $20,492
700XF13 22' Clearview, Triplex w/ 72" Class III ITA Carriage $20,674
700XF18 22' Freelift, Triplex w/ 66" Floating Shaft Carriage $23,275
700XF19 22' Freelift, Triplex w/ 84" Floating Shaft Carriage $24,184
700XF20 22' Freelift Triplex, w/ 60" Class III ITA Carriage $23,743
700XF21 22' Freelift Triplex, w/ 72" Class III ITA Carriage $24,863
700XF14 15' Freelift, Triplex w/ 66" Floating Shaft Carriage $20,947
700XF15 15' Freelift, Triplex w/ 84" Floating Shaft Carriage $21,766
700XF16 15' Freelift, Triplex w/ 60" Class III ITA Carraige $21,368
700XF17 15' Freelift, Triplex w/ 72" Class III ITA Carraige $22,377
FORK SETS
700M808 48" x 5" x 2" ITA class III forks $1,589
700M810 72" x 5" x 2" ITA class III forks 10,000lb cap. $1,732
700M801 48" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft $1,433
700M802 60" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 10,000lb cap. $1,685
700M803 72" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft, 6200lbs capacity at 36" load center $1,944
700M804 48" x 2" x 2" block tines (6) for 2-1/4" fork shaft $2,598
HOSE KITS
700XE13 Single Internal Hose Kit for 8,000 & 10,000lb - 22' Clearview Masts $1,339
700XE14 Single Internal Hose Kit for 8,000 & 10,000lb - 15' FL Masts $1,205
700XE15 Single Internal Hose Kit for 8,000 & 10,000lb - 22' FL Masts $1,339
Select ONE mast and carriage combination and ONE fork set per machine order
All prices and specifications subject to change without notice page 6 of 6 950 RTFL USD Price Page
FASTRAC
JCB FASTRAC
3230 XTRA
TIER 4i
MACHINE PRICE LIST
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1ST, 2013
JCB, Inc. North American
in U.S. Dollars
Fastrac
3230 XTRA FASTRAC - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1ST, 2013
STANDARD EQUIPMENT
GENERAL
ENGINE
TRANSMISSIONmounted joystick and 4 modes of operation. 0-43 mph.
PTO
AXLES
TIRES
STEERING
BRAKES
SUSPENSION
capacity of 551 lbs. (2500Kg).
CAB
REAR HITCH
DRAWBAR Heavy Duty Drawbar
HYDRAULICS 37 gal/min maximum oil flow @ 3000 psi. 4 rear electronic controlled spool valves. All with 4 position
double acting valves with flow and time control, float position, switchable kick out and zero leak.
In addition an optional power beyond circuit offers maximum pump flow on demand with load sensing.
LIGHTS Full road lighting including 2 front mounted halogen headlights, 4 hazard/turn signals, 8 front and
6 rear work lights, 2 rear brake/tail and reverse lights.
ELECTRICAL 12 volt electrical system to IP67 standard, two 12 volt batteries (815 CCA each), 150 amp alternator,
OTHER STANDARD Performance monitor with radar, operators handbook, 92 gallon fuel tank, 28 gallon hydraulic tank,
EQUIPMENT external rear hitch controls and PTO stop. Lockable storage compartment.
electronic transmission control, ash tray and cigar lighter, auxiliary 12 volt power socket, truck type rear view
Trelleborg 540/65 R34 TM800 front and rear tires.
Full width ROPS cab, air conditioning, heater, dust filter, tinted glass, air suspension seat,
Electro-hydraulic soft engage front and rear differential locks.
ABS air over hydraulic actuation, twin calliper outboard disc brakes on all 4 wheels, spring on air off
Front 3 link suspension with coil springs and shock absorbers, rear hydraulic self levelling with a load
Recirculating ball, power assisted. Tilt and telescope adjustable steering column
auxiliary 7 pin lighting socket (to SAE J560), in cab 12 volt socket.
parking brake, air drier element for cold climate operation.
15430 LBS / 7000Kg lift capacity category III linkage with electronic control, fender mounted remote
view mirrors, front and rear windscreen wash wipe, tilt and telescope adjustable steering column.
passenger seat, seat belts, digital instrumentation, monitoring and warning system,
190 PTO Hp, independent rear 540 and 1000 rpm., 1-3/4" 20 spline (optional) and 1-3/8" (6 and
Beam type axles with epicyclic outboard reduction hubs. Electro-hydraulic 4wd spring on pressure off.
Agricultural tractor with full suspension and 42mph (65Km/h) travel speed.
SISU 7.4 Liter TIER 4i, 220 Max Hp. 1015Nm torque @ 1500 rpm. Dual dry element air filter.
Engine block heater. Vertical 'A' post exhaust, foot and hand throttle.
JCB 4 range, 6 speed powershift with powered range changes. Electronic control with an arm rest
21 spline) PTO shafts. Electro-hydraulic actuation.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - (NO ATTACHMENTS CURRENTLY OFFERED)
DEALER FIT - FASTRAC (NO DEALER FIT ITEMS CURRENTLY OFFERED)
All prices and specifications subject to change without notice 2 of 5 3230 XTRA FASTRAC USD Price Page
3230 XTRA FASTRAC - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1ST, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 3687A
CODE ITEM 3230 XTRA
3687
130A606 USA Operators manual
130B684 Transmission rear PTO only (540/1000 rpm)
130C646 540/65 R34 Trelleborg TM800 Tires 80" track width
130D618 Cat 3 rear linkage with electronic control. 15430lb/7000Kg
130E657 4 Spool auxiliary hydraulics without front linkage
130F630 Heavy duty drawbar frame
130G612 Heavy duty drawbar for use with 130F630
130J607 Front weights for Fastrac without front linkage (1980 lbs.)
130K603 CAT 3 - 2 conversion balls
130L610 12volt accessory power socket
130L636 Twin Electrically Adjustable Mirrors
130L638 Worklights. 8 front and 6 rear
130L640 Performance monitor with radar
130M605 1.75" 20 spline PTO adapter
130M618 Smokers pack - ash tray and cigar lighter
130M625 Deluxe Heated Air Suspension Seat
130N669 GPS Auto Steer ready package - Trimble compatible system
130N676 Hydraulic trailer brakes
Shipping Weight - Lbs. 18,711
Shipping Weight - Kgs. 8,505
SUGGESTED LIST PRICE $225,458
Fastrac 3230-65 XTRA 4wd tractor with 220 Hp SISU 7.4 liter TIER 4i engine,
JCB 6 X 4 Powershift transmission, 37 gal/min hyd. pump, air suspension
drivers and fixed passenger seats c/w seat belts, heater, air conditioning and
electrical block heater
Select one of the following PACKAGE BUILD codes. Selections from SECTION 4 (OPTIONS) may be added but no
deletions are allowed.
All prices and specifications subject to change without notice 3 of 5 3230 XTRA FASTRAC USD Price Page
3230 XTRA FASTRAC - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1ST, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
3687 13,581 6173 $188,490
COUNTRY CODE (E)
130A606 USA Operators manual 2 1 $0
GEARBOX (E)
130B684 Transmission rear PTO only (540/1000 rpm) 0 0 $2,830
130B686 Transmission front and rear PTO - single output front PTO 275 125 $8,489
WHEELS (E)
130C631 540/65 R34 Front Tires and 600/70 R30 Rear Tires 1,158 526 $12,664
130C645 540/65 R30 Front Tires and 600/65 R28 Rear Tires 920 418 $6,129
130C646 540/65 R34 Trelleborg TM800 Tires 80" track width 1,632 742 $8,240
130C649 540/65 R30 Nokian TRI-2 Tires 920 418 $11,330
REAR LINKAGE (E)
130D618 Cat 3 rear linkage with electronic control. 15430lb/7000Kg 1,012 460 $10,659
FRONT LINKAGE & AUXILIARY HYDRAULICS
130E657 4 Spool auxiliary hydraulics without front linkage 110 50 $2,154
130E658 4 Spool auxiliary hydraulics with front linkage 7716lb/ 1,320 600 $9,140
REAR TRAILER HITCH (E)
130F624 Pick up hitch 330 150 $3,313
130F630 Heavy duty drawbar frame 330 150 $2,282
COMPLETING PACKAGE (E)
130G601 Completeing pack - for use with 130F624 0 0 $0
130G612 Heavy duty drawbar for use with 130F630 0 0 $1,030
Fastrac 3230-65 XTRA 4wd tractor with 220 Hp SISU 7.4 liter TIER 4i engine, JCB 6 X 4
Powershift transmission, 37 gal/min hyd. pump, air suspension drivers and fixed passenger seats
c/w seat belts, heater, air conditioning and electrical block heater
If not ordering a Package Build Unit from Section 1, select one code from each ESSENTIAL (E) category below. Select
FACTORY FIT Options from Section 4.
All prices and specifications subject to change without notice 4 of 5 3230 XTRA FASTRAC USD Price Page
3230 XTRA FASTRAC - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1ST, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC OPTIONS
130H620 Heavy duty rear suspension cylinders - 7165lb/3250Kg capacity 11 5 $672
130H622 Front free flow return 2 1 $351
130H623 Front auxiliary hydraulics tee into spool No. 3 7 3 $704
130H624 Front auxiliary hydraulics tee into spool No. 4 13 6 $704
130H625 Power beyond Load Sensing Hydraulic Circuit 9 4 $1,363
130H618 Green spool priority flow option 2 1 $1,202
130N676 Hydraulic trailer brakes 7 3 $991
ADDITIONAL WEIGHT OPTIONS
130J607 Front weights for Fastrac without front linkage (1980 lbs.) 1,980 900 $2,388
130J602 Front weights for Fastrac with front linkage (1980 lbs.) 1,980 900 $2,388
130J603 Rear deck weight - 2200lbs - Factory Installed option only 2,200 1,000 $3,167
REAR LINKAGE OPTIONS
130K601 Hook end top link 22 10 $137
130K603 CAT 3 - 2 conversion balls 2 1 $66
130K607 Heavy duty lift cylinders 3.6"/90mm (17637lbs lift capacity) 22 10 $531
OTHER OPTIONS
130L640 Performance monitor with radar 4 2 $1,806
130L634 Heated Windshield and Mirrors 6 3 $2,961
130L636 Twin Electrically Adjustable Mirrors 2 1 $529
130L629 LH forward/reverse lever 2 1 $219
130L638 Worklights. 8 front and 6 rear 20 9 $710
130L610 12volt accessory power socket 2 1 $132
130M605 1.75" 20 spline PTO adapter 2 1 $330
130L635 Xenon Worklights - 8 Front and 6 Rear Lights including 2 front xenon and 2 rear xenon lights 20 9 $3,830
130M625 Deluxe Heated Air Suspension Seat 10 5 $451
130N669 GPS Auto Steer ready package - Trimble compatible system 15 7 $2,318
Select Optional (O) equipment as desired within limitations if indicated. These items may be added to any PACKAGE BUILD
or CUSTOM BUILD machine if not already included.
All prices and specifications subject to change without notice 5 of 5 3230 XTRA FASTRAC USD Price Page
JCB FASTRAC
8280
MACHINE PRICE LIST
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
in U.S. Dollars
Fastrac
8280 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
GENERAL
CAB
ENGINE
TIRES
TRANSMISSIONand high range 0 - 42 mph. Arm rest mounted joystick and touch screen control.
PTO
AXLES
REAR HITCH
BRAKES
SUSPENSION
capacity of 5,511 lbs (2,500 Kg).
STEERING
HYDRAULICS 55 gal/min maximum oil flow @ 3000 psi. 4 rear electronic controlled spool valves, all with 4 position
double acting valves with flow and time control, float position, switchable kick out and zero leak.
In addition a power beyond circuit offers maximum pump flow on demand with load sensing.
DRAWBAR Heavy Duty Drawbar
LIGHTS Full road lighting including 2 front mounted halogen headlights, 4 hazard/turn signals, 8 front and
6 rear work lights, 2 rear brake/tail and reverse lights.
ELECTRICAL 12 volt electrical system to IP67 standard, two 12 volt batteries (950 CCA each), 200 amp alternator,
OTHER STANDARD Performance monitor with radar, operators handbook, 158 gallon fuel tank, 48 gallon hydraulic tank,
EQUIPMENT external rear hitch controls and PTO stop. Lockable storage compartment.
New full width ROPS cab, climate control, heater, dust filter, tinted glass, air suspension seat,
JCB V-Tronic 2 range Continually Variable Transmission with 4 modes of operation. Low range 0 - 28 mph
245 max PTO Hp, independent rear 540 and 1000 rpm., 1-3/4" 20 spline (optional) and 1-3/8" (6 and 21 spline)
Beam type axles with epicyclic outboard reduction hubs. Electro-hydraulic 4wd spring on pressure off.
22,046 LBS / 10,000 Kg lift capacity category III linkage with electronic control, fender mounted remote.
JCB Fastrac agricultural tractor with full suspension and 43mph travel speed.
SISU 8.4 Litre, 279 Max Hp. 1195 Nm torque. Powercore dry element air filter. Engine block heater. Vertical 'A'
exhaust, foot and hand throttle.
passenger seat, seat belts, digital instrumentation, monitoring and warning system,
electronic transmission control, ash tray and cigar lighter, auxiliary 12 volt power socket, electrically
auxiliary 7 pin lighting socket (to SAE J560), in cab 12 volt socket.
parking brake, air drier element for cold climate operation.
steering column
Trelleborg 540/65 R38 front and 650/75 R38 rear tires.
adjustable mirrors front and rear, windscreen wash wipe, tilt and telescope adjustable steering column.
ABS air over hydraulic actuation, twin calliper outboard disc brakes on all 4 wheels, spring on air off
Front 4 link suspension with coil springs and shock absorbers, rear hydraulic self levelling with a load
Recirculating ball with hydraulic power assistance and assistor ram. Tilt and telescope adjustable
PTO shafts. Electro-hydraulic actuation. Optional front PTO available, 1000 rpm only
Electro-hydraulic soft engage front and rear differential locks.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - (NO ATTACHMENTS CURRENTLY OFFERED)
DEALER FIT - FASTRAC (NO DEALER FIT ITEMS CURRENTLY OFFERED)
All prices and specifications subject to change without notice 2 of 5 8280 FASTRAC USD Price Page
8280 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 3802A
CODE ITEM 8280
3802
130A828 North American operators manual
130B803 No Front PTO
130C806 Trelleborg 540/65 R38 front and 650/75 R38 rear tires.
130D808 4 rear auxiliary hydraulic spool valves - 55gpm
130E802 Heavy duty drawbar
130F801 North American completing package
130G809 GPS Auto Steer ready package - Trimble compatible system
130K802 CAT 3 - 2 linkage conversion balls
130L804 12V accessory power supply sockets
130L818 Field performance package including radar and Activ
130L821 Twin Electrically Adjustable Mirrors
130M801 Deluxe Heated Air Suspension Seat
130M802 Rear 1¾" 20 spline PTO shaft
130M808 Mirror - Interior Rear View
130M814 Single line hydraulic trailer brakes
130M816 Cab air filter, heavy duty remote mounted with inlet snorkel
Shipping Weight - Lbs. 22,999
Shipping Weight - Kgs. 10,454
SUGGESTED LIST PRICE $264,118
Fastrac 8280 4wd tractor with 279 max Hp SISU 8.4 liter, tier 4i engine using
SCR technology, 2 range CVT transmission, air operated disc brakes with ABS
on all four wheels, air suspension driver's and fixed passenger seats c/w seat
belts, heater, air conditioning and block heater and full road lights
Select one of the following PACKAGE BUILD codes. Selections from SECTION 4 (OPTIONS) may be added but no
deletions are allowed.
All prices and specifications subject to change without notice 3 of 5 8280 FASTRAC USD Price Page
8280 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
3802 22,274 10,125 $242,794
OPERATORS MANUAL (E)
130A828 2 1 $0
PTO (E)
130B803 0 0 $0
130B804 159 72 $7,401
WHEELS AND TIRES (E)
130C802 0 0 $265
130C804 0 0 $530
130C805 496 225 $7,535
130C806 476 216 $5,835
REAR HYDRAULICS AND FRONT LINKAGE (E)
130D808 15 7 $3,170
130D809 810 368 $10,442
130D810 2 1 $1,105
130D811 15 7 $2,123
130D812 810 368 $9,395
REAR TRAILER HITCH (E)
130E801 110 50 $3,866
130E802 150 68 $3,866
130E810 0 0 $0
COMPLETING PACKAGE (E)
130F801 0 0 $0
AUTOSTEER (E)
130G809 45 20 $4,191
North American completing package
GPS Auto Steer ready package - Trimble compatible system
4 rear auxiliary hydraulic spool valves and front linkage - 37gpm
Pickup hitch and PTO drawbar
Heavy duty drawbar
No drawbar
3 rear auxiliary hydraulic spool valves - 37gpm
4 rear auxiliary hydraulic spool valves - 37gpm
Trelleborg 540/65 R34 front and 650/65R38 rear tires.
Trelleborg 540/65 R34 front and 650/65R38 rear tires. Wide Track.
Trelleborg 540/65 R38 front and 710/70 R38 rear tires.
Trelleborg 540/65 R38 front and 650/75 R38 rear tires.
Fastrac 8280 4wd tractor with 279 max Hp SISU 8.4 liter, tier 4i engine using SCR technology, 2
range CVT transmission, air operated disc brakes with ABS on all four wheels, air suspension
driver's and fixed passenger seats c/w seat belts, heater, air conditioning and block heater and full
road lights
North American operators manual
No Front PTO
Front PTO - 1000 rpm, 13/8" 21 spline shaft rotates clockwise
4 rear auxiliary hydraulic spool valves - 55gpm
4 rear auxiliary hydraulic spool valves and front linkage - 55gpm
If not ordering a Package Build Unit from Section 1, select one code from each ESSENTIAL (E) category below. Select
FACTORY FIT Options from Section 4.
All prices and specifications subject to change without notice 4 of 5 8280 FASTRAC USD Price Page
8280 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC OPTIONS
130H806 Front Auxiliary hydraulics - connected into rear spool number 3 20 9 $693
130H807 Front Auxiliary hydraulics - connected into rear spool number 4 20 9 $693
130H808 Front Auxiliary return line 10 5 $346
130H809 Power beyond, load sensing hydraulic circuit - for 55gpm hydraulic pump 25 11 $1,363
130H810 Power beyond, load sensing hydraulic circuit - for 37gpm hydraulic pump 25 11 $1,363
130M814 Single line hydraulic trailer brakes 10 5 $977
ADDITIONAL WEIGHT OPTIONS
130J803 Front weight, 1900lbs. Front linkage mount 1,980 900 $2,599
130J804 Front weight, 3300lbs. Front linkage mount 3,300 1,500 $4,191
130J808 Rear weight - 1800lbs - Factory Installed option only 1,800 818 $5,145
130J812 Front weight, 1900lbs. Chassis mount 1,980 900 $2,599
130J813 Front weight, 3300lbs. Chassis mount 3,300 1,500 $4,191
REAR LINKAGE OPTIONS
130K801 Knuckle end top link 2 1 $160
130K802 CAT 3 - 2 linkage conversion balls 2 1 $65
CAB OPTIONS
130L804 12V accessory power supply sockets 2 1 $132
130L816 Left Hand Column Forward/Reverse lever 2 1 $219
130L818 Field performance package including radar and Activ Traction 5 2 $1,806
130L819 Heated windshield and mirrors 6 3 $2,902
130L820 Auxiliary Headlights 4 2 $796
130L821 Twin Electrically Adjustable Mirrors 2 1 $341
130L822 Xenon Worklights - 8 Front and 6 Rear Lights including 2 front xenon and 2 rear xenon lights 8 4 $3,825
130L826 Camera with color screen - rear drawbar and hitch view 5 2 $2,599
130M801 Deluxe Heated Air Suspension Seat 10 5 $451
130M808 Mirror - Interior Rear View 2 1 $164
130M809 Monitor Mounting Rail 2 1 $530
130M812 Heat reducing glass treatment 1 0 $4,509
130M816 Cab air filter, heavy duty remote mounted with inlet snorkel 2 1 $0
OTHER OPTIONS
130M802 Rear 1¾" 20 spline PTO shaft 2 1 $326
130M803 Rear 1¾" 6 spline PTO shaft 2 1 $327
130M804 DIN 3 plate for front linkage 60 27 $1,271
Select Optional (O) equipment as desired within limitations if indicated. These items may be added to any PACKAGE
BUILD or CUSTOM BUILD machine if not already included.
All prices and specifications subject to change without notice 5 of 5 8280 FASTRAC USD Price Page
JCB FASTRAC
8310
MACHINE PRICE LIST
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
in U.S. Dollars
Fastrac
8310 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
GENERAL
CAB
ENGINE
TIRES
TRANSMISSIONand high range 0 - 42 mph. Arm rest mounted joystick and touch screen control.
PTO
AXLES
REAR HITCH
BRAKES
SUSPENSION
capacity of 5,511 lbs (2,500 Kg).
STEERING
HYDRAULICS 55 gal/min maximum oil flow @ 3000 psi. 4 rear electronic controlled spool valves, all with 4 position
double acting valves with flow and time control, float position, switchable kick out and zero leak.
In addition a power beyond circuit offers maximum pump flow on demand with load sensing.
DRAWBAR Heavy Duty Drawbar
LIGHTS Full road lighting including 2 front mounted halogen headlights, 4 hazard/turn signals, 8 front and
6 rear work lights, 2 rear brake/tail and reverse lights.
ELECTRICAL 12 volt electrical system to IP67 standard, two 12 volt batteries (950 CCA each), 200 amp alternator,
OTHER STANDARD Performance monitor with radar, operators handbook, 158 gallon fuel tank, 48 gallon hydraulic tank,
EQUIPMENT external rear hitch controls and PTO stop. Lockable storage compartment.
272 max PTO Hp, independent rear 540 and 1000 rpm., 1-3/4" 20 spline (optional) and 1-3/8" (6 and 21 spline)
Beam type axles with epicyclic outboard reduction hubs. Electro-hydraulic 4wd spring on pressure off.
22,046 LBS / 10,000 Kg lift capacity category III linkage with electronic control, fender mounted remote.
PTO shafts. Electro-hydraulic actuation. Optional front PTO available, 1000 rpm only
Electro-hydraulic soft engage front and rear differential locks.
adjustable mirrors front and rear, windscreen wash wipe, tilt and telescope adjustable steering column.
New full width ROPS cab, climate control, heater, dust filter, tinted glass, air suspension seat,
JCB V-Tronic 2 range Continually Variable Transmission with 4 modes of operation. Low range 0 - 28 mph
JCB Fastrac agricultural tractor with full suspension and 43mph travel speed.
SISU 8.4 Litre, 306 Max Hp. 1310 Nm torque. Powercore dry element air filter. Engine block heater. Vertical
A' post exhaust, foot and hand throttle.
passenger seat, seat belts, digital instrumentation, monitoring and warning system,
electronic transmission control, ash tray and cigar lighter, auxiliary 12 volt power socket, electrically
Trelleborg 540/65 R38 front and 710/70 R38 rear tires.
ABS air over hydraulic actuation, twin calliper outboard disc brakes on all 4 wheels, spring on air off
Front 4 link suspension with coil springs and shock absorbers, rear hydraulic self levelling with a load
Recirculating ball with hydraulic power assistance and assistor ram. Tilt and telescope adjustable
auxiliary 7 pin lighting socket (to SAE J560), in cab 12 volt socket.
parking brake, air drier element for cold climate operation.
steering column
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - (NO ATTACHMENTS CURRENTLY OFFERED)
DEALER FIT - FASTRAC (NO DEALER FIT ITEMS CURRENTLY OFFERED)
All prices and specifications subject to change without notice 2 of 5 8310 FASTRAC USD Price Page
8310 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 3803A
CODE ITEM 8310
3803
130A828 North American operators manual
130B803 No Front PTO
130C805 Trelleborg 540/65 R38 front and 710/70 R38 rear tires.
130D808 4 rear auxiliary hydraulic spool valves - 55gpm
130E802 Heavy duty drawbar
130F801 North American completing package
130G809 GPS Auto Steer ready package - Trimble compatible system
130K802 CAT 3 - 2 linkage conversion balls
130L804 12V accessory power supply sockets
130L818 Field performance package including radar and Activ
130L821 Twin Electrically Adjustable Mirrors
130M801 Deluxe Heated Air Suspension Seat
130M802 Rear 1¾" 20 spline PTO shaft
130M808 Mirror - Interior Rear View
130M814 Single line hydraulic trailer brakes
130M816 Cab air filter, heavy duty remote mounted with inlet snorkel
Shipping Weight - Lbs. 23,019
Shipping Weight - Kgs. 10,463
SUGGESTED LIST PRICE $288,519
Fastrac 8310 4wd tractor with 307 max Hp SISU 8.4 liter, tier 4i engine using
SCR technology, 2 range CVT transmission, air operated disc brakes with ABS
on all four wheels, air suspension driver seat and fixed passenger seat, heater,
air conditioning and block heater and full road lights
Select one of the following PACKAGE BUILD codes. Selections from SECTION 4 (OPTIONS) may be added but no
deletions are allowed.
All prices and specifications subject to change without notice 3 of 5 8310 FASTRAC USD Price Page
8310 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
3803 22,274 10,125 $265,495
OPERATORS MANUAL (E)
130A828 2 1 $0
PTO (E)
130B803 0 0 $0
130B804 159 72 $7,401
WHEELS AND TIRES (E)
130C805 496 225 $7,535
130C806 476 216 $5,835
130D808 15 7 $3,170
130D809 4 rear auxiliary hydraulic spool valves and front linkage - 55gpm 810 368 $10,442
130D810 2 1 $1,105
130D811 15 7 $2,123
130D812 810 368 $9,395
130E801 110 50 $3,866
130E802 Heavy duty drawbar 150 68 $3,866
130E810 0 0 $0
130F801 0 0 $0
AUTOSTEER (E)
130G809 45 20 $4,191
REAR HYDRAULICS AND FRONT LINKAGE (E)
4 rear auxiliary hydraulic spool valves - 55gpm
Fastrac 8310 4wd tractor with 307 max Hp SISU 8.4 liter, tier 4i engine using SCR technology, 2
range CVT transmission, air operated disc brakes with ABS on all four wheels, air suspension
driver seat and fixed passenger seat, heater, air conditioning and block heater and full road
lights
North American operators manual
No Front PTO
Front PTO - 1000 rpm, 13/8" 21 spline shaft rotates clockwise
Trelleborg 540/65 R38 front and 710/70 R38 rear tires.
Trelleborg 540/65 R38 front and 650/75 R38 rear tires.
3 rear auxiliary hydraulic spool valves - 37gpm
4 rear auxiliary hydraulic spool valves - 37gpm
GPS Auto Steer ready package - Trimble compatible system
Pickup hitch and PTO drawbar
No drawbar
COMPLETING PACKAGE (E)
North American completing package
4 rear auxiliary hydraulic spool valves and front linkage - 37gpm
REAR TRAILER HITCH (E)
If not ordering a Package Build Unit from Section 1, select one code from each ESSENTIAL (E) category below. Select
FACTORY FIT Options from Section 4.
All prices and specifications subject to change without notice 4 of 5 8310 FASTRAC USD Price Page
8310 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC OPTIONS
130H806 Front Auxiliary hydraulics - connected into rear spool number 3 20 9 $693
130H807 Front Auxiliary hydraulics - connected into rear spool number 4 20 9 $693
130H808 Front Auxiliary return line 10 5 $346
130H809 Power beyond, load sensing hydraulic circuit - for 55gpm hydraulic pump 25 11 $1,363
130H810 Power beyond, load sensing hydraulic circuit - for 37gpm hydraulic pump 25 11 $1,363
130M814 Single line hydraulic trailer brakes 10 5 $977
ADDITIONAL WEIGHT OPTIONS
130J803 Front weight, 1900lbs. Front linkage mount 1,980 900 $2,599
130J804 Front weight, 3300lbs. Front linkage mount 3,300 1,500 $4,191
130J808 Rear weight - 1800lbs - Factory Installed option only 1,800 818 $5,145
130J812 Front weight, 1900lbs. Chassis mount 1,980 900 $2,599
130J813 Front weight, 3300lbs. Chassis mount 3,300 1,500 $4,191
REAR LINKAGE OPTIONS
130K801 Knuckle end top link 2 1 $160
130K802 CAT 3 - 2 linkage conversion balls 2 1 $65
CAB OPTIONS
130L804 12V accessory power supply sockets 2 1 $132
130L816 Left Hand Column Forward/Reverse lever 2 1 $219
130L818 Field performance package including radar and Activ Traction 5 2 $1,806
130L819 Heated windshield and mirrors 6 3 $2,902
130L820 Auxiliary Headlights 4 2 $796
130L821 Twin Electrically Adjustable Mirrors 2 1 $341
130L822 Xenon Worklights - 8 Front and 6 Rear Lights including 2 front xenon and 2 rear xenon lights 8 4 $3,825
130L826 Camera with color screen - rear drawbar and hitch view 5 2 $2,599
130M801 Deluxe Heated Air Suspension Seat 10 5 $451
130M808 Mirror - Interior Rear View 2 1 $164
130M809 Monitor Mounting Rail 2 1 $530
130M812 Heat reducing glass treatment 1 0 $4,509
130M816 Cab air filter, heavy duty remote mounted with inlet snorkel 2 1 $0
OTHER OPTIONS
130M802 Rear 1¾" 20 spline PTO shaft 2 1 $326
130M803 Rear 1¾" 6 spline PTO shaft 2 1 $327
130M804 DIN 3 plate for front linkage 60 27 $1,271
Select Optional (O) equipment as desired within limitations if indicated. These items may be added to any PACKAGE
BUILD or CUSTOM BUILD machine if not already included.
All prices and specifications subject to change without notice 5 of 5 8310 FASTRAC USD Price Page
JCB FASTRAC
3230 XTRA
TIER 4i
MACHINE PRICE LIST
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1ST, 2013
JCB, Inc. North American
in U.S. Dollars
Fastrac
3230 XTRA FASTRAC - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1ST, 2013
STANDARD EQUIPMENT
GENERAL
ENGINE
TRANSMISSIONmounted joystick and 4 modes of operation. 0-43 mph.
PTO
AXLES
TIRES
STEERING
BRAKES
SUSPENSION
capacity of 551 lbs. (2500Kg).
CAB
REAR HITCH
DRAWBAR Heavy Duty Drawbar
HYDRAULICS 37 gal/min maximum oil flow @ 3000 psi. 4 rear electronic controlled spool valves. All with 4 position
double acting valves with flow and time control, float position, switchable kick out and zero leak.
In addition an optional power beyond circuit offers maximum pump flow on demand with load sensing.
LIGHTS Full road lighting including 2 front mounted halogen headlights, 4 hazard/turn signals, 8 front and
6 rear work lights, 2 rear brake/tail and reverse lights.
ELECTRICAL 12 volt electrical system to IP67 standard, two 12 volt batteries (815 CCA each), 150 amp alternator,
OTHER STANDARD Performance monitor with radar, operators handbook, 92 gallon fuel tank, 28 gallon hydraulic tank,
EQUIPMENT external rear hitch controls and PTO stop. Lockable storage compartment.
electronic transmission control, ash tray and cigar lighter, auxiliary 12 volt power socket, truck type rear view
Trelleborg 540/65 R34 TM800 front and rear tires.
Full width ROPS cab, air conditioning, heater, dust filter, tinted glass, air suspension seat,
Electro-hydraulic soft engage front and rear differential locks.
ABS air over hydraulic actuation, twin calliper outboard disc brakes on all 4 wheels, spring on air off
Front 3 link suspension with coil springs and shock absorbers, rear hydraulic self levelling with a load
Recirculating ball, power assisted. Tilt and telescope adjustable steering column
auxiliary 7 pin lighting socket (to SAE J560), in cab 12 volt socket.
parking brake, air drier element for cold climate operation.
15430 LBS / 7000Kg lift capacity category III linkage with electronic control, fender mounted remote
view mirrors, front and rear windscreen wash wipe, tilt and telescope adjustable steering column.
passenger seat, seat belts, digital instrumentation, monitoring and warning system,
190 PTO Hp, independent rear 540 and 1000 rpm., 1-3/4" 20 spline (optional) and 1-3/8" (6 and
Beam type axles with epicyclic outboard reduction hubs. Electro-hydraulic 4wd spring on pressure off.
Agricultural tractor with full suspension and 42mph (65Km/h) travel speed.
SISU 7.4 Liter TIER 4i, 220 Max Hp. 1015Nm torque @ 1500 rpm. Dual dry element air filter.
Engine block heater. Vertical 'A' post exhaust, foot and hand throttle.
JCB 4 range, 6 speed powershift with powered range changes. Electronic control with an arm rest
21 spline) PTO shafts. Electro-hydraulic actuation.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - (NO ATTACHMENTS CURRENTLY OFFERED)
DEALER FIT - FASTRAC (NO DEALER FIT ITEMS CURRENTLY OFFERED)
All prices and specifications subject to change without notice 2 of 5 3230 XTRA FASTRAC USD Price Page
3230 XTRA FASTRAC - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1ST, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 3687A
CODE ITEM 3230 XTRA
3687
130A606 USA Operators manual
130B684 Transmission rear PTO only (540/1000 rpm)
130C646 540/65 R34 Trelleborg TM800 Tires 80" track width
130D618 Cat 3 rear linkage with electronic control. 15430lb/7000Kg
130E657 4 Spool auxiliary hydraulics without front linkage
130F630 Heavy duty drawbar frame
130G612 Heavy duty drawbar for use with 130F630
130J607 Front weights for Fastrac without front linkage (1980 lbs.)
130K603 CAT 3 - 2 conversion balls
130L610 12volt accessory power socket
130L636 Twin Electrically Adjustable Mirrors
130L638 Worklights. 8 front and 6 rear
130L640 Performance monitor with radar
130M605 1.75" 20 spline PTO adapter
130M618 Smokers pack - ash tray and cigar lighter
130M625 Deluxe Heated Air Suspension Seat
130N669 GPS Auto Steer ready package - Trimble compatible system
130N676 Hydraulic trailer brakes
Shipping Weight - Lbs. 18,711
Shipping Weight - Kgs. 8,505
SUGGESTED LIST PRICE $225,458
Fastrac 3230-65 XTRA 4wd tractor with 220 Hp SISU 7.4 liter TIER 4i engine,
JCB 6 X 4 Powershift transmission, 37 gal/min hyd. pump, air suspension
drivers and fixed passenger seats c/w seat belts, heater, air conditioning and
electrical block heater
Select one of the following PACKAGE BUILD codes. Selections from SECTION 4 (OPTIONS) may be added but no
deletions are allowed.
All prices and specifications subject to change without notice 3 of 5 3230 XTRA FASTRAC USD Price Page
3230 XTRA FASTRAC - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1ST, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
3687 13,581 6173 $188,490
COUNTRY CODE (E)
130A606 USA Operators manual 2 1 $0
GEARBOX (E)
130B684 Transmission rear PTO only (540/1000 rpm) 0 0 $2,830
130B686 Transmission front and rear PTO - single output front PTO 275 125 $8,489
WHEELS (E)
130C631 540/65 R34 Front Tires and 600/70 R30 Rear Tires 1,158 526 $12,664
130C645 540/65 R30 Front Tires and 600/65 R28 Rear Tires 920 418 $6,129
130C646 540/65 R34 Trelleborg TM800 Tires 80" track width 1,632 742 $8,240
130C649 540/65 R30 Nokian TRI-2 Tires 920 418 $11,330
REAR LINKAGE (E)
130D618 Cat 3 rear linkage with electronic control. 15430lb/7000Kg 1,012 460 $10,659
FRONT LINKAGE & AUXILIARY HYDRAULICS
130E657 4 Spool auxiliary hydraulics without front linkage 110 50 $2,154
130E658 4 Spool auxiliary hydraulics with front linkage 7716lb/ 1,320 600 $9,140
REAR TRAILER HITCH (E)
130F624 Pick up hitch 330 150 $3,313
130F630 Heavy duty drawbar frame 330 150 $2,282
COMPLETING PACKAGE (E)
130G601 Completeing pack - for use with 130F624 0 0 $0
130G612 Heavy duty drawbar for use with 130F630 0 0 $1,030
Fastrac 3230-65 XTRA 4wd tractor with 220 Hp SISU 7.4 liter TIER 4i engine, JCB 6 X 4
Powershift transmission, 37 gal/min hyd. pump, air suspension drivers and fixed passenger seats
c/w seat belts, heater, air conditioning and electrical block heater
If not ordering a Package Build Unit from Section 1, select one code from each ESSENTIAL (E) category below. Select
FACTORY FIT Options from Section 4.
All prices and specifications subject to change without notice 4 of 5 3230 XTRA FASTRAC USD Price Page
3230 XTRA FASTRAC - TIER 4i U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1ST, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC OPTIONS
130H620 Heavy duty rear suspension cylinders - 7165lb/3250Kg capacity 11 5 $672
130H622 Front free flow return 2 1 $351
130H623 Front auxiliary hydraulics tee into spool No. 3 7 3 $704
130H624 Front auxiliary hydraulics tee into spool No. 4 13 6 $704
130H625 Power beyond Load Sensing Hydraulic Circuit 9 4 $1,363
130H618 Green spool priority flow option 2 1 $1,202
130N676 Hydraulic trailer brakes 7 3 $991
ADDITIONAL WEIGHT OPTIONS
130J607 Front weights for Fastrac without front linkage (1980 lbs.) 1,980 900 $2,388
130J602 Front weights for Fastrac with front linkage (1980 lbs.) 1,980 900 $2,388
130J603 Rear deck weight - 2200lbs - Factory Installed option only 2,200 1,000 $3,167
REAR LINKAGE OPTIONS
130K601 Hook end top link 22 10 $137
130K603 CAT 3 - 2 conversion balls 2 1 $66
130K607 Heavy duty lift cylinders 3.6"/90mm (17637lbs lift capacity) 22 10 $531
OTHER OPTIONS
130L640 Performance monitor with radar 4 2 $1,806
130L634 Heated Windshield and Mirrors 6 3 $2,961
130L636 Twin Electrically Adjustable Mirrors 2 1 $529
130L629 LH forward/reverse lever 2 1 $219
130L638 Worklights. 8 front and 6 rear 20 9 $710
130L610 12volt accessory power socket 2 1 $132
130M605 1.75" 20 spline PTO adapter 2 1 $330
130L635 Xenon Worklights - 8 Front and 6 Rear Lights including 2 front xenon and 2 rear xenon lights 20 9 $3,830
130M625 Deluxe Heated Air Suspension Seat 10 5 $451
130N669 GPS Auto Steer ready package - Trimble compatible system 15 7 $2,318
Select Optional (O) equipment as desired within limitations if indicated. These items may be added to any PACKAGE BUILD
or CUSTOM BUILD machine if not already included.
All prices and specifications subject to change without notice 5 of 5 3230 XTRA FASTRAC USD Price Page
JCB FASTRAC
8280
MACHINE PRICE LIST
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
in U.S. Dollars
Fastrac
8280 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
GENERAL
CAB
ENGINE
TIRES
TRANSMISSIONand high range 0 - 42 mph. Arm rest mounted joystick and touch screen control.
PTO
AXLES
REAR HITCH
BRAKES
SUSPENSION
capacity of 5,511 lbs (2,500 Kg).
STEERING
HYDRAULICS 55 gal/min maximum oil flow @ 3000 psi. 4 rear electronic controlled spool valves, all with 4 position
double acting valves with flow and time control, float position, switchable kick out and zero leak.
In addition a power beyond circuit offers maximum pump flow on demand with load sensing.
DRAWBAR Heavy Duty Drawbar
LIGHTS Full road lighting including 2 front mounted halogen headlights, 4 hazard/turn signals, 8 front and
6 rear work lights, 2 rear brake/tail and reverse lights.
ELECTRICAL 12 volt electrical system to IP67 standard, two 12 volt batteries (950 CCA each), 200 amp alternator,
OTHER STANDARD Performance monitor with radar, operators handbook, 158 gallon fuel tank, 48 gallon hydraulic tank,
EQUIPMENT external rear hitch controls and PTO stop. Lockable storage compartment.
New full width ROPS cab, climate control, heater, dust filter, tinted glass, air suspension seat,
JCB V-Tronic 2 range Continually Variable Transmission with 4 modes of operation. Low range 0 - 28 mph
245 max PTO Hp, independent rear 540 and 1000 rpm., 1-3/4" 20 spline (optional) and 1-3/8" (6 and 21 spline)
Beam type axles with epicyclic outboard reduction hubs. Electro-hydraulic 4wd spring on pressure off.
22,046 LBS / 10,000 Kg lift capacity category III linkage with electronic control, fender mounted remote.
JCB Fastrac agricultural tractor with full suspension and 43mph travel speed.
SISU 8.4 Litre, 279 Max Hp. 1195 Nm torque. Powercore dry element air filter. Engine block heater. Vertical 'A'
exhaust, foot and hand throttle.
passenger seat, seat belts, digital instrumentation, monitoring and warning system,
electronic transmission control, ash tray and cigar lighter, auxiliary 12 volt power socket, electrically
auxiliary 7 pin lighting socket (to SAE J560), in cab 12 volt socket.
parking brake, air drier element for cold climate operation.
steering column
Trelleborg 540/65 R38 front and 650/75 R38 rear tires.
adjustable mirrors front and rear, windscreen wash wipe, tilt and telescope adjustable steering column.
ABS air over hydraulic actuation, twin calliper outboard disc brakes on all 4 wheels, spring on air off
Front 4 link suspension with coil springs and shock absorbers, rear hydraulic self levelling with a load
Recirculating ball with hydraulic power assistance and assistor ram. Tilt and telescope adjustable
PTO shafts. Electro-hydraulic actuation. Optional front PTO available, 1000 rpm only
Electro-hydraulic soft engage front and rear differential locks.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - (NO ATTACHMENTS CURRENTLY OFFERED)
DEALER FIT - FASTRAC (NO DEALER FIT ITEMS CURRENTLY OFFERED)
All prices and specifications subject to change without notice 2 of 5 8280 FASTRAC USD Price Page
8280 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 3802A
CODE ITEM 8280
3802
130A828 North American operators manual
130B803 No Front PTO
130C806 Trelleborg 540/65 R38 front and 650/75 R38 rear tires.
130D808 4 rear auxiliary hydraulic spool valves - 55gpm
130E802 Heavy duty drawbar
130F801 North American completing package
130G809 GPS Auto Steer ready package - Trimble compatible system
130K802 CAT 3 - 2 linkage conversion balls
130L804 12V accessory power supply sockets
130L818 Field performance package including radar and Activ
130L821 Twin Electrically Adjustable Mirrors
130M801 Deluxe Heated Air Suspension Seat
130M802 Rear 1¾" 20 spline PTO shaft
130M808 Mirror - Interior Rear View
130M814 Single line hydraulic trailer brakes
130M816 Cab air filter, heavy duty remote mounted with inlet snorkel
Shipping Weight - Lbs. 22,999
Shipping Weight - Kgs. 10,454
SUGGESTED LIST PRICE $264,118
Fastrac 8280 4wd tractor with 279 max Hp SISU 8.4 liter, tier 4i engine using
SCR technology, 2 range CVT transmission, air operated disc brakes with ABS
on all four wheels, air suspension driver's and fixed passenger seats c/w seat
belts, heater, air conditioning and block heater and full road lights
Select one of the following PACKAGE BUILD codes. Selections from SECTION 4 (OPTIONS) may be added but no
deletions are allowed.
All prices and specifications subject to change without notice 3 of 5 8280 FASTRAC USD Price Page
8280 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
3802 22,274 10,125 $242,794
OPERATORS MANUAL (E)
130A828 2 1 $0
PTO (E)
130B803 0 0 $0
130B804 159 72 $7,401
WHEELS AND TIRES (E)
130C802 0 0 $265
130C804 0 0 $530
130C805 496 225 $7,535
130C806 476 216 $5,835
REAR HYDRAULICS AND FRONT LINKAGE (E)
130D808 15 7 $3,170
130D809 810 368 $10,442
130D810 2 1 $1,105
130D811 15 7 $2,123
130D812 810 368 $9,395
REAR TRAILER HITCH (E)
130E801 110 50 $3,866
130E802 150 68 $3,866
130E810 0 0 $0
COMPLETING PACKAGE (E)
130F801 0 0 $0
AUTOSTEER (E)
130G809 45 20 $4,191
North American completing package
GPS Auto Steer ready package - Trimble compatible system
4 rear auxiliary hydraulic spool valves and front linkage - 37gpm
Pickup hitch and PTO drawbar
Heavy duty drawbar
No drawbar
3 rear auxiliary hydraulic spool valves - 37gpm
4 rear auxiliary hydraulic spool valves - 37gpm
Trelleborg 540/65 R34 front and 650/65R38 rear tires.
Trelleborg 540/65 R34 front and 650/65R38 rear tires. Wide Track.
Trelleborg 540/65 R38 front and 710/70 R38 rear tires.
Trelleborg 540/65 R38 front and 650/75 R38 rear tires.
Fastrac 8280 4wd tractor with 279 max Hp SISU 8.4 liter, tier 4i engine using SCR technology, 2
range CVT transmission, air operated disc brakes with ABS on all four wheels, air suspension
driver's and fixed passenger seats c/w seat belts, heater, air conditioning and block heater and full
road lights
North American operators manual
No Front PTO
Front PTO - 1000 rpm, 13/8" 21 spline shaft rotates clockwise
4 rear auxiliary hydraulic spool valves - 55gpm
4 rear auxiliary hydraulic spool valves and front linkage - 55gpm
If not ordering a Package Build Unit from Section 1, select one code from each ESSENTIAL (E) category below. Select
FACTORY FIT Options from Section 4.
All prices and specifications subject to change without notice 4 of 5 8280 FASTRAC USD Price Page
8280 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC OPTIONS
130H806 Front Auxiliary hydraulics - connected into rear spool number 3 20 9 $693
130H807 Front Auxiliary hydraulics - connected into rear spool number 4 20 9 $693
130H808 Front Auxiliary return line 10 5 $346
130H809 Power beyond, load sensing hydraulic circuit - for 55gpm hydraulic pump 25 11 $1,363
130H810 Power beyond, load sensing hydraulic circuit - for 37gpm hydraulic pump 25 11 $1,363
130M814 Single line hydraulic trailer brakes 10 5 $977
ADDITIONAL WEIGHT OPTIONS
130J803 Front weight, 1900lbs. Front linkage mount 1,980 900 $2,599
130J804 Front weight, 3300lbs. Front linkage mount 3,300 1,500 $4,191
130J808 Rear weight - 1800lbs - Factory Installed option only 1,800 818 $5,145
130J812 Front weight, 1900lbs. Chassis mount 1,980 900 $2,599
130J813 Front weight, 3300lbs. Chassis mount 3,300 1,500 $4,191
REAR LINKAGE OPTIONS
130K801 Knuckle end top link 2 1 $160
130K802 CAT 3 - 2 linkage conversion balls 2 1 $65
CAB OPTIONS
130L804 12V accessory power supply sockets 2 1 $132
130L816 Left Hand Column Forward/Reverse lever 2 1 $219
130L818 Field performance package including radar and Activ Traction 5 2 $1,806
130L819 Heated windshield and mirrors 6 3 $2,902
130L820 Auxiliary Headlights 4 2 $796
130L821 Twin Electrically Adjustable Mirrors 2 1 $341
130L822 Xenon Worklights - 8 Front and 6 Rear Lights including 2 front xenon and 2 rear xenon lights 8 4 $3,825
130L826 Camera with color screen - rear drawbar and hitch view 5 2 $2,599
130M801 Deluxe Heated Air Suspension Seat 10 5 $451
130M808 Mirror - Interior Rear View 2 1 $164
130M809 Monitor Mounting Rail 2 1 $530
130M812 Heat reducing glass treatment 1 0 $4,509
130M816 Cab air filter, heavy duty remote mounted with inlet snorkel 2 1 $0
OTHER OPTIONS
130M802 Rear 1¾" 20 spline PTO shaft 2 1 $326
130M803 Rear 1¾" 6 spline PTO shaft 2 1 $327
130M804 DIN 3 plate for front linkage 60 27 $1,271
Select Optional (O) equipment as desired within limitations if indicated. These items may be added to any PACKAGE
BUILD or CUSTOM BUILD machine if not already included.
All prices and specifications subject to change without notice 5 of 5 8280 FASTRAC USD Price Page
JCB FASTRAC
8310
MACHINE PRICE LIST
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: MAY 1, 2013
JCB, Inc. North American
in U.S. Dollars
Fastrac
8310 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
STANDARD EQUIPMENT
GENERAL
CAB
ENGINE
TIRES
TRANSMISSIONand high range 0 - 42 mph. Arm rest mounted joystick and touch screen control.
PTO
AXLES
REAR HITCH
BRAKES
SUSPENSION
capacity of 5,511 lbs (2,500 Kg).
STEERING
HYDRAULICS 55 gal/min maximum oil flow @ 3000 psi. 4 rear electronic controlled spool valves, all with 4 position
double acting valves with flow and time control, float position, switchable kick out and zero leak.
In addition a power beyond circuit offers maximum pump flow on demand with load sensing.
DRAWBAR Heavy Duty Drawbar
LIGHTS Full road lighting including 2 front mounted halogen headlights, 4 hazard/turn signals, 8 front and
6 rear work lights, 2 rear brake/tail and reverse lights.
ELECTRICAL 12 volt electrical system to IP67 standard, two 12 volt batteries (950 CCA each), 200 amp alternator,
OTHER STANDARD Performance monitor with radar, operators handbook, 158 gallon fuel tank, 48 gallon hydraulic tank,
EQUIPMENT external rear hitch controls and PTO stop. Lockable storage compartment.
272 max PTO Hp, independent rear 540 and 1000 rpm., 1-3/4" 20 spline (optional) and 1-3/8" (6 and 21 spline)
Beam type axles with epicyclic outboard reduction hubs. Electro-hydraulic 4wd spring on pressure off.
22,046 LBS / 10,000 Kg lift capacity category III linkage with electronic control, fender mounted remote.
PTO shafts. Electro-hydraulic actuation. Optional front PTO available, 1000 rpm only
Electro-hydraulic soft engage front and rear differential locks.
adjustable mirrors front and rear, windscreen wash wipe, tilt and telescope adjustable steering column.
New full width ROPS cab, climate control, heater, dust filter, tinted glass, air suspension seat,
JCB V-Tronic 2 range Continually Variable Transmission with 4 modes of operation. Low range 0 - 28 mph
JCB Fastrac agricultural tractor with full suspension and 43mph travel speed.
SISU 8.4 Litre, 306 Max Hp. 1310 Nm torque. Powercore dry element air filter. Engine block heater. Vertical
A' post exhaust, foot and hand throttle.
passenger seat, seat belts, digital instrumentation, monitoring and warning system,
electronic transmission control, ash tray and cigar lighter, auxiliary 12 volt power socket, electrically
Trelleborg 540/65 R38 front and 710/70 R38 rear tires.
ABS air over hydraulic actuation, twin calliper outboard disc brakes on all 4 wheels, spring on air off
Front 4 link suspension with coil springs and shock absorbers, rear hydraulic self levelling with a load
Recirculating ball with hydraulic power assistance and assistor ram. Tilt and telescope adjustable
auxiliary 7 pin lighting socket (to SAE J560), in cab 12 volt socket.
parking brake, air drier element for cold climate operation.
steering column
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - (NO ATTACHMENTS CURRENTLY OFFERED)
DEALER FIT - FASTRAC (NO DEALER FIT ITEMS CURRENTLY OFFERED)
All prices and specifications subject to change without notice 2 of 5 8310 FASTRAC USD Price Page
8310 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 3803A
CODE ITEM 8310
3803
130A828 North American operators manual
130B803 No Front PTO
130C805 Trelleborg 540/65 R38 front and 710/70 R38 rear tires.
130D808 4 rear auxiliary hydraulic spool valves - 55gpm
130E802 Heavy duty drawbar
130F801 North American completing package
130G809 GPS Auto Steer ready package - Trimble compatible system
130K802 CAT 3 - 2 linkage conversion balls
130L804 12V accessory power supply sockets
130L818 Field performance package including radar and Activ
130L821 Twin Electrically Adjustable Mirrors
130M801 Deluxe Heated Air Suspension Seat
130M802 Rear 1¾" 20 spline PTO shaft
130M808 Mirror - Interior Rear View
130M814 Single line hydraulic trailer brakes
130M816 Cab air filter, heavy duty remote mounted with inlet snorkel
Shipping Weight - Lbs. 23,019
Shipping Weight - Kgs. 10,463
SUGGESTED LIST PRICE $288,519
Fastrac 8310 4wd tractor with 307 max Hp SISU 8.4 liter, tier 4i engine using
SCR technology, 2 range CVT transmission, air operated disc brakes with ABS
on all four wheels, air suspension driver seat and fixed passenger seat, heater,
air conditioning and block heater and full road lights
Select one of the following PACKAGE BUILD codes. Selections from SECTION 4 (OPTIONS) may be added but no
deletions are allowed.
All prices and specifications subject to change without notice 3 of 5 8310 FASTRAC USD Price Page
8310 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
3803 22,274 10,125 $265,495
OPERATORS MANUAL (E)
130A828 2 1 $0
PTO (E)
130B803 0 0 $0
130B804 159 72 $7,401
WHEELS AND TIRES (E)
130C805 496 225 $7,535
130C806 476 216 $5,835
130D808 15 7 $3,170
130D809 4 rear auxiliary hydraulic spool valves and front linkage - 55gpm 810 368 $10,442
130D810 2 1 $1,105
130D811 15 7 $2,123
130D812 810 368 $9,395
130E801 110 50 $3,866
130E802 Heavy duty drawbar 150 68 $3,866
130E810 0 0 $0
130F801 0 0 $0
AUTOSTEER (E)
130G809 45 20 $4,191
REAR HYDRAULICS AND FRONT LINKAGE (E)
4 rear auxiliary hydraulic spool valves - 55gpm
Fastrac 8310 4wd tractor with 307 max Hp SISU 8.4 liter, tier 4i engine using SCR technology, 2
range CVT transmission, air operated disc brakes with ABS on all four wheels, air suspension
driver seat and fixed passenger seat, heater, air conditioning and block heater and full road
lights
North American operators manual
No Front PTO
Front PTO - 1000 rpm, 13/8" 21 spline shaft rotates clockwise
Trelleborg 540/65 R38 front and 710/70 R38 rear tires.
Trelleborg 540/65 R38 front and 650/75 R38 rear tires.
3 rear auxiliary hydraulic spool valves - 37gpm
4 rear auxiliary hydraulic spool valves - 37gpm
GPS Auto Steer ready package - Trimble compatible system
Pickup hitch and PTO drawbar
No drawbar
COMPLETING PACKAGE (E)
North American completing package
4 rear auxiliary hydraulic spool valves and front linkage - 37gpm
REAR TRAILER HITCH (E)
If not ordering a Package Build Unit from Section 1, select one code from each ESSENTIAL (E) category below. Select
FACTORY FIT Options from Section 4.
All prices and specifications subject to change without notice 4 of 5 8310 FASTRAC USD Price Page
8310 FASTRAC U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: MAY 1, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
HYDRAULIC OPTIONS
130H806 Front Auxiliary hydraulics - connected into rear spool number 3 20 9 $693
130H807 Front Auxiliary hydraulics - connected into rear spool number 4 20 9 $693
130H808 Front Auxiliary return line 10 5 $346
130H809 Power beyond, load sensing hydraulic circuit - for 55gpm hydraulic pump 25 11 $1,363
130H810 Power beyond, load sensing hydraulic circuit - for 37gpm hydraulic pump 25 11 $1,363
130M814 Single line hydraulic trailer brakes 10 5 $977
ADDITIONAL WEIGHT OPTIONS
130J803 Front weight, 1900lbs. Front linkage mount 1,980 900 $2,599
130J804 Front weight, 3300lbs. Front linkage mount 3,300 1,500 $4,191
130J808 Rear weight - 1800lbs - Factory Installed option only 1,800 818 $5,145
130J812 Front weight, 1900lbs. Chassis mount 1,980 900 $2,599
130J813 Front weight, 3300lbs. Chassis mount 3,300 1,500 $4,191
REAR LINKAGE OPTIONS
130K801 Knuckle end top link 2 1 $160
130K802 CAT 3 - 2 linkage conversion balls 2 1 $65
CAB OPTIONS
130L804 12V accessory power supply sockets 2 1 $132
130L816 Left Hand Column Forward/Reverse lever 2 1 $219
130L818 Field performance package including radar and Activ Traction 5 2 $1,806
130L819 Heated windshield and mirrors 6 3 $2,902
130L820 Auxiliary Headlights 4 2 $796
130L821 Twin Electrically Adjustable Mirrors 2 1 $341
130L822 Xenon Worklights - 8 Front and 6 Rear Lights including 2 front xenon and 2 rear xenon lights 8 4 $3,825
130L826 Camera with color screen - rear drawbar and hitch view 5 2 $2,599
130M801 Deluxe Heated Air Suspension Seat 10 5 $451
130M808 Mirror - Interior Rear View 2 1 $164
130M809 Monitor Mounting Rail 2 1 $530
130M812 Heat reducing glass treatment 1 0 $4,509
130M816 Cab air filter, heavy duty remote mounted with inlet snorkel 2 1 $0
OTHER OPTIONS
130M802 Rear 1¾" 20 spline PTO shaft 2 1 $326
130M803 Rear 1¾" 6 spline PTO shaft 2 1 $327
130M804 DIN 3 plate for front linkage 60 27 $1,271
Select Optional (O) equipment as desired within limitations if indicated. These items may be added to any PACKAGE
BUILD or CUSTOM BUILD machine if not already included.
All prices and specifications subject to change without notice 5 of 5 8310 FASTRAC USD Price Page
TELETRUK
JCB TELETRUK
TLT35D4 x 4
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: October 21, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
JCB TELETRUK - TLT35D (4 x 4) U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 21, 2013
STANDARD EQUIPMENT
ENGINE 74HP, Kohler KD12504TCR Diesel Engine, Tier IV compliant, dry type air cleaner,
Water separator, spin - on fuel filter, thermostart assist, anti-freeze protection to -35 degrees F.
TRANSMISSION Torque Converter Response Hydrostatic drive system
2 speed Hydrostatic transmission, position 1 shovel work, position 2 general duty,
TIRES Options of Industrial or Agricultural tread patterns
ELECTRICAL 12 volt, 60 Ah battery, with 40 amp alternator. Wire harness connectors meet/exceed
IP67 electrical system rating. 2 front 1 rear worklights.
INSTRUMENTS IDC (information display center) Visual warning system for coolant temperature,
engine oil pressure, air cleaner, battery charge, transmission oil pressure and temperature,
fuel gauge and hour meter. Livelink
TELESCOPIC BOOM Two section 14' lift height with hydraulic parallel lift 7700lbs capacity to full height
HYDRAULICS One set of auxillaries, delivering 19gpm
CANOPY Meets SAE J231 FOPS and SEA J1040 ROPS requirements, left side entry. Canopy and cab tilts up for improved
access to mid-ship of the machine for service and maintenance. Vinyl operators seat, adjustable forward
and aft. Cab swing lock pin, metal side screen, single lever control for boom lift/lower and rollback/dump,
tilt control lever forward and reverse hand lever, operator manual, roof mounted strobe, back up alarm
CARRIAGE Standard class lll ITA carriage with option of 1 or 2 extra hydraulic quick disconnect couplings
OPTIONAL CAB Meets SAE J231 FOPS and SEA J1040 ROPS requirements, left side entry.
Glass in front, side, top and rear, optional side door in metal or canvas
WARRANTY 2 year full coverage warranty (please see the machine warranty certificate for details)
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - NOT CURRENTLY OFFERED
DEALER FIT - TELETRUK (PLEASE CONTACT JCB ATTACHMENTS)
All prices and specifications subject to change without notice page 2 of 6 TLT35D 4x4 USD Price Page
JCB TELETRUK - TLT35D (4 x 4) U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 21, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 1176A
CODE ITEM CANOPY
1176 4 Wheel Drive Tier 4 TELETRUK 35D - 3.5 ton (7000lb Cap) Telescopic Industrial Forklift
250A021 27 x 10 x 12 Traction Front & Rear Foam Filled Traction
250B401 STD Height Canopy Frame Right Hand Side Glass Only
250C021 4 Spool Valve Block - 2 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose
250D061 4WD Drive Controls for Tier IV fuel gauge and hour meter. Livelink
250E031 42" Standard Class III Industrial Carriage (3B) Long Drop
250F014 American operator handbook
250G401 Standard Vinyl Seat
250H055 Carriage Angle Indicator, includes Standard Load Guard
250H112 Quick Disconnect Side-Shift (includes load chart 250H120)
250J005 Quick Release Couplings, One Extra Service
250L008 Strobe Warning Light Roof Mounted
250L043 Reverse Alarm
Shipping Weight - Lbs. 10,939
Shipping Weight - Kgs. 4,962
SUGGESTED LIST PRICE $75,413
Select one of the following machine PACKAGE BUILDS.
All prices and specifications subject to change without notice page 3 of 6 TLT35D 4x4 USD Price Page
JCB TELETRUK - TLT35D (4 x 4) U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 21, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
1176 4 Wheel Drive Tier 4 TELETRUK 35D - 3.5 ton (7000lb Cap) Telescopic Industrial Forklift 9,900 4,500 $58,811
TIRES & WHEELS (E)
250A020 27 x 10 x 12 Front & Rear Pneumatic Crossply Traction 500 227 $4,174
250A021 27 x 10 x 12 Traction Front & Rear Foam Filled Traction 670 305 $5,672
OPERATORS COMPARTMENT (E)
250B401 STD Height Canopy Frame Right Hand Side Glass Only 180 82 $1,803
250B402 STD Height Canopy Frame Right Hand Side Mesh Only 150 68 $2,298
250B403 Low Height Canopy Frame Right Hand Side Glass Only 180 82 $1,803
250B404 Low Height Canopy Frame Right Hand Side Mesh Only 150 68 $2,298
250B405 STD Height Partial Cab 180 82 $3,360
250B406 Low Height Partial Cab 180 82 $3,360
250B407 STD Height Full Cab: Includes Heater/Demister 285 130 $6,167
250B408 Low Height Full Cab: Includes Heater/Demister 285 130 $6,167
250B409 STD Height Canopy: Includes Top Glass 316 144 $3,427
250B410 Low Height Canopy: Includes Top Glass 316 144 $3,427
250B411 STD Height Canopy: Includes Top Glass, Front Screen & Wipers 320 145 $2,709
250B412 Low Height Canopy: Includes Top Glass, Front Screen & Wipers 320 145 $2,709
HYDRAULICS (E)
250C021 40 18 $2,578
250C022 40 18 $3,735
250C023 40 18 $3,326
250C024 40 18 $4,483
250C061 40 18 $2,578
250C062 40 18 $3,735
250C063 40 18 $3,326
250C064 40 18 $4,483
TRANSMISSION (E)
250D061 4WD Drive Controls for Tier IV 0 - $1,072
FORKS (E)
250E000 No Forks Fitted 0 0 $0
250E031 42" Standard Class III Industrial Carriage (3B) Long Drop 38 17 $855
250E032 48" Standard Class III Industrial Carriage (3B) Long Drop 44 20 $898
250E033 45" Standard Class III Industrial Carraige (3B) Long Drop 40 18 $884
LANGUAGE PACK (E)
250F014 American operator handbook 0 - $0
SEATS (E)
250G401 Standard Vinyl Seat 10 5 $667
250G402 Standard Fabric Seat 10 5 $710
5 Spool Valve Block - 3 Levers & Button Control in Knob (STANDARD FLOW)
1/4" Hose- CHANGEEZE SYSTEM
4 Spool Valve Block - 2 Levers & Button Control in Knob (EXTRA FLOW) 3/8"
Hose SIDE TRAY- CHANGEEZE SYSTEM
5 Spool Valve Block - 3 Levers & Button Control in Knob (EXTRA FLOW) 3/8"
Hose Side & Top Tray- CHANGEEZE SYSTEM
4 Spool Valve Block - 2 Levers & Button Control in Knob (STANDARD FLOW)
1/4" Hose
5 Spool Valve Block - 3 Levers & Button Control in Knob (STANDARD FLOW)
1/4" Hose
4 Spool Valve Block - 2 Levers & Button Control in Knob (EXTRA FLOW) 3/8"
Hose SIDE TRAY
5 Spool Valve Block - 3 Levers & Button Control in Knob (EXTRA FLOW) 3/8"
Hose Side & Top Tray
4 Spool Valve Block - 2 Levers & Button Control in Knob (STANDARD FLOW)
1/4" Hose- CHANGEEZE SYSTEM
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options from Section 3 as needed.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 TLT35D 4x4 USD Price Page
JCB TELETRUK - TLT35D (4 x 4) U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 21, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
FRONT END ANCILIARY
250H014 Single Tilt Carriage Pin 0 0 $334
250H044 Load Guard Low Height 30" 35 16 $338
250H045 Load Guard Standard Height 48" 40 18 $355
250H054 Carriage Angle Indicator, includes Low Load Guard 36 16 $673
250H055 Carriage Angle Indicator, includes Standard Load Guard 41 19 $688
250H200 Wheel Protection Kit: for 4WD Models 0 0 $210 #
250H300 Greasing Kit: Includes a Grease Gun and a 400gm Cartridge of JCB High Pressure Grease 0 0 $26 0
250H444 Heavy Duty Class 3 Carriage for Heavy/Tough Applications 0 0 $528
250H582 Changezee unit: Change from forks to shovel without leaving the cab 0 0 $5,858
250H587 0 0 $10,903
SIDE-SHIFT OPTIONS
250H110 Integral Class III Side-Shift (gives 0 deration) 50 23 $1,909
250H111 Bolt on Side-Shift Class III 55 25 $1,535
250H112 Quick Disconnect Side-Shift (includes load chart 250H120) 55 25 $2,500
250H117 55 25 $5,565
250H120 Load Chart USA Build (no attachments) 0 0 $0
HYDRAULIC COUPLINGS
250J005 Quick Release Couplings, One Extra Service 3 1 $284
250J006 Quick Release Couplings, Two Extra Services 4 2 $562
250J007 Quick Release Couplings Integral/Bolt-on Side-Shift 3 1 $284
250J030 Alternative Lever Pattern: For Cabs with Side Glass $155
250J031 Alternative Lever Pattern: For Cabs with Side Mesh $155
OPERATORS COMPARTMENT OPTIONS
250H005 2KG Dry Powder Fire Extinguisher 15 7 $231
250H030 Vinyl Side Door STD Height Enclosures Only 0 0 $506
250H031 Vinyl Side Door LOW Height Enclosures Only 0 0 $506
250H032 Heater - Only Available on Diesel 0 0 $754
250H034 Roof Grille Protection Kit 22 10 $616
250H036 Panoramic Mirror 0 0 $210
250K011 3.5T 4x4 Plus Valve: Switch in Cab Activates Rear Axle Diff. Lock $1,514
250L410 Face Fan for Tier IV $132
250L088 In Cab Coolant Temperature Gauge $160
Changezee System includes: Hydraulic quick disconnect unit, Changezee forkframe and Changezee shovel
(no forks)
Complete Quick Disconnect System (comes with H112 QD Side-Shift, H046 QD Shovel J005 1 Set QD
Couplings)
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 TLT35D 4x4 USD Price Page
JCB TELETRUK - TLT35D (4 x 4) U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 21, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKET OPTIONS
250H046 General Purpose Shovel .65 cu Yard Struck Quick Disconnect (Lightweight applications) 110 50 $2,709
250H050 Bagezee Bucket Quick Disconnect 140 64 $6,144
LIGHTING OPTIONS + EXTRAS
250L006 Rotating Beacon Roof Mounted 2 1 $132
250L047 Rotating Beacon Low Mounted 2 2 $132
250L008 Strobe Warning Light Roof Mounted 2 1 $242
250L043 Reverse Alarm 0 1 $242
250L049 Strobe Warning Light Low Mounted 2 1 $242
250L026 Seat Switch for Vinyl Seat 0 0 $242
250L027 Seat Switch for Fabric Seat 0 0 $242
250L057 Radio Installation For Full or Partial Cab 0 0 $317
250L063 2 Additional Work Lights Front Low Mounted 3 1 $506
250L064 2 Additional Work Lights + Lighting Kit L069 3 1 $1,120
250L065 Road Lights Right Hand Dip For STD Height Cab 4 2 $1,587
250L066 Road Lights Right Hand Dip For LOW Height Cab 4 2 $1,587
250L069 Lighting Kit (Stop, Tail, Indicators & Hazard) 3 1 $616
250K060 CAT2 Catalytic Converter, For Low Level Exhaust: Diesel $1,807
250K061 Speed Reduction Kit: To Reduce Travel Speed by 50% $1,807
250K481 Heavy Duty Body Kit: TLT35D 4x4 Tier IV $1,519
250W004 Wastemaster Kit: Added Protection and Additional Features for Applications in Waste/Recycling $2,003
250W414 Wastemaster + Heavy Duty Body Kit for TLT35D 4x4 $3,462
Select Optional Equipment as desired within limitations if indicated.
JCB TELETRUK
TLT35DTCR
CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE
"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.
EFFECTIVE: October 21, 2013
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
JCB TELETRUK - TLT35D U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 21, 2013
STANDARD EQUIPMENT
ENGINE 74HP, Kohler KD12504TCR Diesel Engine, Tier IV compliant, dry type air cleaner,
Water separator, spin - on fuel filter, thermostart assist, anti-freeze protection to -35 degrees F.
TRANSMISSION Torque Converter Response Hydrostatic drive system
Single speed Hydrostatic transmission, power flow TCR
TIRES Options of Industrial or Agricultural tread patterns
ELECTRICAL 12 volt, 60 Ah battery, with 40 amp alternator. Waterproof wire harness connectors meet/exceed
IP67 electrical system rating. 2 front, 1 rear worklights
INSTRUMENTS IDC (information display center) Visual warning system for coolant temperature,
engine oil pressure, air cleaner, battery charge, transmission oil pressure and temperature,
fuel gauge and hour meter.
TELESCOPIC BOOM Two section 14' lift height with hydraulic parallel lift 7700lbs capacity to full height
HYDRAULICS One set of auxillaries, delivering 19gpm
CANOPY Meets SAE J231 FOPS and SEA J1040 ROPS requirements, left side entry. Canopy and cab tilts up for improved
access to mid-ship of the machine for service and maintenance. Vinyl operators seat, adjustable forward
and aft. Cab swing lock pin, metal side screen, single lever control for boom lift/lower and rollback/dump,
tilt control lever forward and reverse hand lever, operator manual, roof mounted strobe, back up alarm
CARRIAGE Standard class lll ITA carriage with option of 1 or 2 extra hydraulic quick disconnect couplings
OPTIONAL CAB Meets SAE J231 FOPS and SEA J1040 ROPS requirements, left side entry.
Glass in front, side, top and rear, optional side door in metal or canvas
WARRANTY 2 year full coverage warranty (please see the machine warranty certificate for details)
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - NOT CURRENTLY OFFERED
DEALER FIT - TELETRUK (PLEASE CONTACT JCB ATTACHMENTS)
All prices and specifications subject to change without notice page 2 of 6 TLT35D 2WD USD Price Page
JCB TELETRUK - TLT35D U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 21, 2013
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES PACKAGE BUILD CODE: 1177A
CODE ITEM CANOPY
1177 TELETRUK 35D - 3.5 ton (7000lb Cap) Telescopic Industrial Forklift
250A015 27 x 10 x 12 Front, 23 x 9 x 10 Rear (P.P.S.) Semi Solids
250B401 STD Height Canopy Frame Right Hand Side Glass Only
250C021 4 Spool Valve Block - 2 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose
250D051 2WD DRIVE CONTOLRS FOR TIER IV
250E046 42" Standard Class III Industrial Carriage (3B) Long Drop
250F014 American operator handbook
250G401 COMPACT VINYL SEAT
250H055 Carriage Angle Indicator, includes Standard Load Guard
250H072 Quick Disconnect Side-Shift (includes load chart 250H078)
250J005 Quick Release Couplings, One Extra Service
250L008 Strobe Warning Light Roof Mounted
250L032 Reverse Alarm
Shipping Weight - Lbs. 11,064
Shipping Weight - Kgs. 5,019
SUGGESTED LIST PRICE $64,552
Select one of the following machine PACKAGE BUILDS.
All prices and specifications subject to change without notice page 3 of 6 TLT35D 2WD USD Price Page
JCB TELETRUK - TLT35D U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 21, 2013
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BASE MACHINE (E)
1177 TELETRUK 35D - 3.5 ton (7000lb Cap) Telescopic Industrial Forklift 10,150 4,614 $50,606
TIRES & WHEELS (E)
250A015 27 x 10 x 12 Front, 23 x 9 x 10 Rear (P.P.S.) Semi Solids 500 227 $3,178
250A016 27 x 10 x 12 Traction Front, 23 x 9 x 10 Industrial Rear 425 193 $3,178
250A017 27 x 10 x 12 Traction Front, 23 x 9 x 10 Industrial Rear - Foam Filled 800 364 $4,092
250A041 27 x 10 x 12 Front, 23 x 9 x 10 Rear Michelin XZM Pneumatic Radials $5,514
OPERATORS COMPARTMENT (E)
250B401 STD Height Canopy Frame Right Hand Side Glass Only 180 82 $1,803
250B402 STD Height Canopy Frame Right Hand Side Mesh Only 150 68 $2,298
250B403 Low Height Canopy Frame Right Hand Side Glass Only 180 82 $1,803
250B404 Low Height Canopy Frame Right Hand Side Mesh Only 150 68 $2,298
250B405 STD Height Partial Cab 180 82 $3,360
250B406 Low Height Partial Cab 180 82 $3,360
250B407 STD Height Full Cab: Includes Heater/Demister 285 130 $6,167
250B408 Low Height Full Cab: Includes Heater/Demister 285 130 $6,167
250B409 STD Height Canopy: Includes Top Glass 316 144 $3,427
250B410 Low Height Canopy: Includes Top Glass 316 144 $3,427
250B411 STD Height Canopy: Includes Top Glass, Front Screen & Wipers 320 145 $2,709
250B412 Low Height Canopy: Includes Top Glass, Front Screen & Wipers 320 145 $2,709
HYDRAULICS (E)
250C021 4 Spool Valve Block - 2 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose 40 18 $2,578
250C022 40 18 $3,735
250C023 40 18 $3,326
250C024 40 18 $4,483
250C061 40 18 $2,578
250C062 40 18 $3,735
250C063 40 18 $3,326
250C064 40 18 $4,483
TRANSMISSION (E)
250D051 Forward & Reverse Lever (TCR) 0 - $1,051
FORKS (E)
250E050 No Forks Fitted 0 0 $0
250E040 42" Standard Class III Industrial Carriage (3A) 38 17 $727
250E041 48" Standard Class III Industrial Carriage (3A) 44 20 $785
250E043 45" Standard Class III Industrial Carraige (3A) 40 18 $773
250E046 42" Standard Class III Industrial Carriage (3B) Long Drop 83 38 $838
250E047 48" Standard Class III Industrial Carriage (3B) Long Drop 44 20 $880
250E049 45" Standard Class III Industrial Carraige (3B) Long Drop 40 18 $867
LANGUAGE PACK (E)
250F014 American operator handbook 0 - $0
SEATS (E)
250G401 Standard Vinyl Seat 10 5 $667
250G402 Standard Fabric Seat 10 5 $710
4 Spool Valve Block - 2 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose-
CHANGEEZE SYSTEM
5 Spool Valve Block - 3 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose-
CHANGEEZE SYSTEM
4 Spool Valve Block - 2 Levers & Button Control in Knob (EXTRA FLOW) 3/8" Hose SIDE TRAY-
CHANGEEZE SYSTEM
5 Spool Valve Block - 3 Levers & Button Control in Knob (EXTRA FLOW) 3/8" Hose Side & Top Tray-
CHANGEEZE SYSTEM
5 Spool Valve Block - 3 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose
4 Spool Valve Block - 2 Levers & Button Control in Knob (EXTRA FLOW) 3/8" Hose SIDE TRAY
5 Spool Valve Block - 3 Levers & Button Control in Knob (EXTRA FLOW) 3/8" Hose Side & Top Tray
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options from Section 3 as needed.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 6 TLT35D 2WD USD Price Page
JCB TELETRUK - TLT35D U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 21, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
FRONT END ANCILIARY
250H005 2KG Dry Powder Fire Extinguisher 15 0 $231
250H008 Boom Stop for Any Quick Disconnect Attachment (included in all 3B forks) 15 7 $231
250H014 Single Tilt Carriage Pin 0 0 $334
250H043 Front Facing Front Wheel Mud Flaps 0 0 $116
250H044 Load Guard Low Height 30" 35 16 $338
250H045 Load Guard Standard Height 48" 40 18 $355
250H054 Carriage Angle Indicator, includes Low Load Guard 36 16 $673
250H055 Carriage Angle Indicator, includes Standard Load Guard 41 19 $688
250H201 Wheel Protection Kit for 2WD Models 0 0 $210
250H300 Greasing Kit: Includes a Grease Gun and a 400gm Cartridge of JCB High Pressure Grease 0 0 $26
250H444 Heavy Duty Class 3 Carriage for Heavy/Tough Applications 0 0 $528
250H582 Changezee unit: Change from forks to shovel without leaving the cab 0 0 $5,858
250H587 0 0 $10,903
SIDE-SHIFT OPTIONS
250H070 Integral Class III Side-Shift (gives 0 deration) 50 23 $1,871
250H071 Bolt on Side-Shift Class III 55 25 $1,517
250H072 Quick Disconnect Side-Shift (includes load chart 250H078) 55 25 $2,450
250H077 55 25 $5,553
250H078 Load Chart USA Build (no attachments) 0 0 $0
HYDRAULIC COUPLINGS
250J005 Quick Release Couplings, One Extra Service 3 1 $284
250J006 Quick Release Couplings, Two Extra Services 4 2 $562
250J007 Quick Release Couplings Integral/Bolt-on Side-Shift 3 1 $284
250J030 Alternative Lever Pattern: For Cabs with Side Glass 0 0 $155
250J031 Alternative Lever Pattern: For Cabs with Side Mesh 0 0 $155
OPERATORS COMPARTMENT OPTIONS
250H030 Vinyl Side Door STD Height Enclosures Only 0 0 $506
250H031 Vinyl Side Door LOW Height Enclosures Only 0 0 $506
250H032 Heater - Only Available on Diesel 0 0 $754
250H034 Roof Grille Protection Kit 22 10 $616
250H036 Panoramic Mirror 0 0 $210
DRIVE OPTIONS & PROTECTION
250K048 CAT2 Catalytic Converter, For Low Level Exhaust: Diesel 0 0 $1,807
250K050 Hydraulic Flow Divider (Twin Wheel Drive) 6 3 $2,146
250K059 Trash Guard (For Waste Applications & Difficult Ground Conditions) 25 11 $838
250K060 Speed Reduction Kit: To Reduce Travel Speed by 50% 0 0 $1,807
250K061 No Creep Software: Gives Machine Characteristic of a Hydrostatic. Boom Hydraulics unchanged. 0 0 $985
250K480 Heavy Duty Body Kit: TLT35D 2WD Tier IV 0 0 $1,519
Changezee System includes: Hydraulic quick disconnect unit, Changezee forkframe and Changezee shovel
(no forks)
Complete Quick Disconnect Sys (comes with H072 QD Side-Shift, H046 QD Shovel J005 1 Set QD
Couplings)
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 TLT35D 2WD USD Price Page
JCB TELETRUK - TLT35D U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: October 21, 2013
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES WEIGHT U.S.
CODE ITEM (lbs.) (kgs.) LIST
BUCKET OPTIONS
250H046 General Purpose Shovel .65 cu Yard Struck Quick Disconnect (Lightweight applications) 110 50 $2,709
250H050 Bagezee Bucket Quick Disconnect 140 64 $6,144
LIGHTING OPTIONS + EXTRAS
250L006 Rotating Beacon Roof Mounted 2 1 $132
250L008 Strobe Warning Light Roof Mounted 2 1 $242
250L026 Seat Switch for Vinyl Seat 0 0 $242
250L027 Seat Switch for Fabric Seat 0 0 $242
250L030 Parts Book 0 0 $94
250L032 Reverse Alarm 0 0 $169
250L041 Reverse Alarm (WHITE NOISE) 0 0 $242
250L047 Rotating Beacon Low Mounted 2 2 $132
250L049 Strobe Warning Light Low Mounted 2 1 $242
250L057 Radio Installation For Full or Partial Cab 0 0 $317
250L063 2 Additional Work Lights Front Low Mounted 3 1 $506
250L064 2 Additional Work Lights + Lighting Kit L069 3 1 $1,120
250L065 Road Lights Right Hand Dip For STD Height Cab 4 2 $1,587
250L066 Road Lights Right Hand Dip For LOW Height Cab 4 2 $1,587
250L069 Lighting Kit (Stop, Tail, Indicators & Hazard) 3 1 $616
250L088 In Cab Coolant Temperature Gauge 0 0 $160
250L410 Face Fan for Tier IV 0 0 $132
250W002 Wastemaster Kit for 2WD Models 0 0 $2,649
250W412 Wastemaster + Heavy Duty Body Kit & Heavy Duty Carriage for 35D 2WD 0 0 $3,172
Select Optional Equipment as desired within limitations if indicated.
WORKMAX
JCB WORKMAX 800
JCB, Inc. North American
MACHINE PRICE LIST
In U.S. Dollars
Prices and Specifications Subject To Change Without Notice
Prices Listed Are MSRP
Effective July 1, 2013
JCB Workmax 800D General Purpose BENCH SEAT – Standard Equipment
Roll Over Protective Structure (ROPS)* Basic Lights to include head lights Roof Retractable Seat Belt 4 Wheel Hydraulic Disc Brakes Manual Tipping Bed 2 Speed CVT Transmission Fenders 2 inch Tow Hitch Receiver Digital Instrumentation: Speedometer, Hourmeter, Tachometer, Odometer, Fuel Gauge, No Charge Warning Light, 4wd indicator Audible/Visible Alarms for Low Engine Oil Pressure and High Water Temperature High Beam Indicator, Turn Signal Indicator, Glow Plug Indicator Electronically Selectable 4 Wheel Drive Electronically Selectable Rear Differential Lock Independent Rear Suspension Bench Seat Warranty: 12 Months or 500 Hours
JCB Workmax 800D General Purpose BUCKET SEAT – Standard Equipment Roll Over Protective Structure (ROPS)* Basic Lights to include head lights Roof Retractable Seat Belt 4 Wheel Hydraulic Disc Brakes Manual Tipping Bed 2 Speed CVT Transmission Fenders 2 inch Tow Hitch Receiver Digital Instrumentation: Speedometer, Hourmeter, Tachometer, Odometer, Fuel Gauge, No Charge Warning Light, 4wd indicator Audible/Visible Alarms for Low Engine Oil Pressure and High Water Temperature High Beam Indicator, Turn Signal Indicator, Glow Plug Indicator Electronically Selectable 4 Wheel Drive Electronically Selectable Rear Differential Lock Independent Rear Suspension Bucket Seat – Adjustable Drivers Seat Warranty: 12 Months or 500 Hours
*Roll Over Protective Structure (ROPS) – Meets Requirements of 2003/37/EC & 2009/75/EC
Prices and Specifications subject to change without notice North American Suggested List prices Listed in U.S Dollars Effective July 1, 2013 Prices Listed Are Ex-Works Savannah
JCB Workmax 800D General Purpose Unit
JDS CODE Machine MSRP 2777 Workmax 800D - GP Yellow Bench Seat $12,399.00
2778 Workmax 800D - GP Camo Bench Seat $12,593.00
2779 Workmax 800D - GP Blue Bench Seat $12,399.00
2783 Workmax 800D – Green Bench Seat $12,399.00
2785 Workmax 800D – GP Yellow Bucket Seat $12,528.00
2786 Workmax 800D – GP Camo Bucket Seat $12,720.00
2787 Workmax 800D – GP Blue Bucket Seat $12,528.00
2788 Workmax 800D – GP Green Bucket Seat $12,528.00
Prices and Specifications subject to change without notice North American Suggested List prices Listed in U.S Dollars Effective July 1, 2013 Prices Listed Are Ex-Works Savannah
DEALER INSTALLED ACCESSORIES
Part Number Part Description 980/A7361 Glass Front Screen with Wiper and Washer
980/A7362 Rear Screen
980/A7363 Hard Door Kit (Glass)
980/A7364 Brush Guard Kit
980/A7365 Hydraulic Lift Kit
980/A7367 Heater
980/A7368 Green Bodywork (Replacement)
980/A7369 Soft Door Kit
980/A7370 Beacon Kit
980/A7372 Rear Mesh Screen
980/A7374 Front Tow Hitch
980/A7375 Versa Acrylic Front Screen
980/A7376 Load Bed Liner
980/A7377 Bench Seat Kit
980/A7378 Interior Mirror
980/A7379 Road Light Kit *
980/A7380 Lower Door Kit
980/A7381 Camo Bodywork (Replacement)
980/A7382 Yellow Bodywork (Replacement)
980/A7383 Off Road Tires Black
980/A7384 Off Road Tires Silver
980/A7385 Blue Bodywork (Replacement)
*Items necessary for a hard cab kit: Hard Door Kit (980/A7363), Rear Screen (980/A7362) and either Glass Front Screen (980/A7361) or Versa
Acrylic Front Screen (980/A7375) and optional heater (980/A7367)
*Road Light Kit includes turn signals and brake lights
For current attachment pricing please log on to JDS