jcb hydraulic excavator 220xjcb teleskid 3ts-8w compact track loader effective: january 1, 2018...
TRANSCRIPT
2018
JCB HYDRAULIC EXCAVATOR
220X
EFFECTIVE: April 1, 2018
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
All prices and specifications subject to change without notice. Page 1 of 5 220X USA Price Page
220X HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 120
GPM. Servo pump flow: 4.2 GPM.
JCB Command Plus Cab. Climate controlled, noise and vibration isolated by four hydraulically damped
resilient mountings. Full opening front window. Fan forced fresh air ventilation with defogger and washer/wiper.
Fully adjustable, high back air suspension seat with seatbelt, headrest, armrests and backrest recline.
Two boom and two mainframe work light.
CONTROLS
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No dipper reinforcing
required for hammer operations. Boom: 18' 8" (5.70m). Dipper Arms: 7' 10" (2.40m) or 9' 10"
(3.0m).
UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X-frame type with flush fitted, heavy duty
swing turret cover and heavy duty undercover. Two top and eight bottom rollers are sealed and lubricated.
Track idler is sealed and lubricated and incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 2 speed, driven by two axial piston motors. Flush fitted heavy duty track motor
guards. Final drives are planetary reduction type with bolt on sprockets. Maximum track speed is
3.5 MPH, low speed is 2.0 MPH. Parking brake is disc type, spring applied, hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 100 amp output alternator with
12 volt in-cab supply.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
OPERATING WEIGHT Equipped w/standard boom, dipper, 32" track shoes and excavator bucket: aprx. 52,450 lbs.
WARRANTY 3-year / 3,000 hour full coverage warranty (please see the machine warranty certificate for details)
JCB Ecomax 448, 173 Net HP at 2000 RPM, Tier 4 Final. 4-cycle, 4-cylinder in line, common rail, direct
injection, variable geometry turbocharged, intercooled diesel. Low emission engine designed to comply
with US EPA emission standard. Dual element air cleaner. Combined single face radiator and hydraulic
oil cooler. Selective Catalytic Reduction (SCR) System.
Excavator controls are ISO pattern, servo operated, with in cab 7" digital display and change over control
to SAE. Tracks are individually operated by foot pedal or hand lever. Speed selection via joystick
operated switch. Control isolation by gate lock lever at cab entrance. Rearview camera standard.
OPERATOR'S AREA
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice. Page 2 of 5 220X USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - YELLOW SERIES
SALES
CODE 220X
9282 220X LC MONO T4F ✓
900AB01 LONG CARRIAGE 2390MM (94IN) GAUGE 4460MM (176IN) LONG ✓
900BA07 800MM (31IN) TRACK PLATES, TRIPLE GROUSER, 49LINKS,STEP EXTENSIONS ✓
900CC01 MONOBOOM,0 HBCV, 3.0M DIPPER ✓
900DC11 TIPPING LINK- 17 TONNE LUG TIPPING LINK ONLY ✓
900ED02 ✓
900KR16 HAMMER/AUX PROP.CONTROLS - 3.0M DIPPER ✓
900MA02 HYDRAULIC QUICK HITCH INSTALLATION FOR 3.0M MONO DIPPER ✓
900RB01 RADIO - BLUETOOTH COMPATIBLE ✓
900RB02 DELUXE SEAT - AIR SUSPENSION AND HEATED BASE ✓
SUGGESTED LIST PRICE $207,315
ATTACHMENTS FOR YELLOW SERIES:
SALES U.S.
CODE LIST
YELLOW SERIES ATTACHMENTS
YWSEA08 ADD 328/00529. 48" BUCKET $6,288
YWSEA09 ADD 980/A8252. HYDRAULIC COUPLER $7,454
YWSEA10 ADD 980/B0210. HM180T $27,375
ITEM
220X HYDRAULIC EXCAVATOR
US LANGUAGE PACK
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please o rder a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice. Page 3 of 5 220X USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
BASE MACHINE (E)
9282 220X LC MONO T4F $192,521
9286 220X LCD MONO T4F $204,600
UNDERCARRIAGE for 9282 BASE UNIT (E)
900AB01 LONG CARRIAGE 2390MM (94IN) GAUGE 4460MM (176IN) LONG $0
UNDERCARRIAGE for 9286 BASE UNIT (E)
900AB04 LONG CARRIAGE 2390MM (94IN) GAUGE 4460MM (176IN) LONG - DOZER INCLUDED $0
TRACK PADS for 9282 BASE UNIT (E)
900BA05 700MM (28IN) TRACK PLATES TRIPLE GROUSER, 49 LINKS $5,580
900BA07 800MM (31IN) TRACK PLATES, TRIPLE GROUSER, 49LINKS,STEP EXTENSIONS $8,375
TRACK PADS for 9286 BASE UNIT (E)
900BA17 700MM DOZER BLADE TRACKS $5,580
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900CC01 MONOBOOM,0 HBCV, 3.0M DIPPER $1,865
900CC03 MONOBOOM,0 HBCV, 3.0M DIPPER HD $3,072
TIPPING LINK (E)
900DC11 TIPPING LINK- 17 TONNE LUG TIPPING LINK ONLY $500
MANUAL PACK (E)
900ED02 US LANGUAGE PACK $0
900ED03 FRENCH/CANADIAN LANGUAGE PACK $0
ITEM
220X HYDRAULIC EXCAVATOR
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice. Page 4 of 5 220X USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
GREASING
900G002 $9,399
MACHINE PROTECTION
900J002 HEAVY DUTY REVOLVING FRAME WITH BOLT ON SIDE PROTECTION $2,073
900J005 LOWER FRAME UNDERCOVERS - 10MM SINGLE PIECE PLATE WITH X SHAPE STIFFENER $625
900J006 XD UNDERCOVERS - 10MM THICK $1,458
HYDRAULIC ATTACHMENT PIPEWORK - NEW FACTORY BUILT ORDERS ONLY
900KR14 HAMMER/AUX/MERGED PROP.CONTROLS - 3.0M DIPPER $2,943
900KR16 HAMMER/AUX PROP.CONTROLS - 3.0M DIPPER $1,577
900KR19 HAMMER/AUX & LOW FLOW PROP. CONTROLS - 3.0M DIPPER $5,115
900KR22 HAMMER/AUX/MERGED & LOW FLOW PROP. CONTROLS - 3.0M DIPPER $6,484
QUICKHITCH OPTIONS
900MA02 HYDRAULIC QUICK HITCH INSTALLATION FOR 3.0M MONO DIPPER $1,577
900MA05 HYDRAULIC QUICK HITCH $7,454
FILTERS AND COOLING OPTIONS
900PA03 FLYSCREEN PLEATED $678
900PA04 AIR COMPRESSOR KIT $3,566
900PA07 REVERSING FAN $3,397
CAB OPTIONS
900RB01 RADIO - BLUETOOTH COMPATIBLE $174
900RB02 DELUXE SEAT - AIR SUSPENSION AND HEATED BASE $726
900RB03 SUPER DELUXE SEAT - AIR SUSPENSION, HEATED BASE, VENTILATION AND AIR LUMBAR $2,089
900RB07 RAIN GUARD, CAB MOUNTED $516
900RB09 FRONT BLIND $83
900RB10 REAR BLIND $110
900RB11 RIGHT HAND SIDE BLIND $110
900RB17 FRONT TWIN WIPER $273
SAFETY OPTIONS
900SC01 FIRE EXTINGUISHER $358
900SC03 FOPS FRONT GUARD $2,394
900SC04 FOPS ROOF GUARD $3,591
900SC05 MESH FULL FRONT GUARD $1,125
900SC06 MESH LOWER FRONT GUARD $835
900SC09 LEFT AND RIGHT FOLDING HAND RAILS $1,190
900SC11 ALL AROUND HANDRAILS (BOXING RING RAILS) $2,018
900SC12 HALOGEN AMBER BEACON $195
900SC14 2 X REAR HALOGEN BEACONS $272
900SC18 TWIN CAMERA $1,088
900SC22 WHITE NOISE ALARM $258
900SC23 SERVICE BAY & ACCESS LIGHTING $338
900SC27 LEVEL 2 - LIGHTING PACK HALOGEN $938
900SC29 LEVEL 3 - LIGHTING PACK HALOGEN $1,250
900SC30 LEVEL 2 - LIGHTING PACK LED $1,824
900SC32 LEVEL 3 - LIGHTING PACK LED $2,500
OPTION PACKS
900TA01 SAFETY PACK $3,539
900TA05 SERVICE PACK FOR 3.0M ARM $7,775
HYDRAULIC OIL OPTIONS
900VA01 HP68 HYDRAULIC OIL- FOR HOT CLIMATE OPERATION $0
900VA02 JCB BIO OIL $4,866
900VA03 PANOLIN HYDRAULIC OIL $7,960
900VA04 HP32 HYDRAULIC OIL - FOR COLD CLIMATE OPERATION $0
MISCELLANEOUS EXTRAS
900XA01 SPADE STORAGE $115
900XA02 COUNTERWEIGHT WITH RED AND WHITE CHEVRONS $1,288
900XA10 BOOM FLOAT MONO $3,902
900XA12 REFUELLING PUMP $628
900XA14 TOOL KIT $24
SECTION 4 - YELLOW SERIES ATTACHMENTS
SALES U.S.
CODE LIST
YELLOW SERIES ATTACHMENTS
YWSEA08 ADD 328/00529. 48" BUCKET $6,288
YWSEA09 ADD 980/A8252. HYDRAULIC COUPLER $7,454
YWSEA10 ADD 980/B0210. HM180T $27,375
ITEM
ITEM
220X HYDRAULIC EXCAVATOR
AUTOGREASING FOR 3M MONO DIPPER
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice. Page 5 of 5 220X USA Price Page
2018
JCB TELESKID
3TS-8WCOMPACT TRACK LOADER
EFFECTIVE: JANUARY 1, 2018
ISSUE 1
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North AmericanMACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR PRICE PAGES
F.O.B. SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
24gpm @ 3335psi standard flow and 33gpm @ 3335psi standa rd equipment.
Rated Operating Capacity of 3100 lbs, Radial Lift Loader Design provides a radial lift path, and with a two stage telescopic boom, a hinge pin height of 159" (13'-3') and 96" (8') of forward reach. Auxiliary hydraulic circuit and high flow are standard for operation of hydraulic powered attachments. All machines are equipped with: Automatic Attachment Leveling System, Smooth Ride System (SRS), a Sealed Electric Power Quick Hitch and Hydraulic Float.
Cab tilts forward to provide further access to the hydraulic components. The bucket tilt (crowd) cylinder has been repositioned inside the boom, thereby allowing the cab to be tilted for service access without raising the boom. Rear door provides access to engine bay and daily
i t d h k i t
SAE certified ROPS/FOPS, left side entry. Units are equipped with a heated air suspension seat with adjustable arm pods, an operator restraint interlock for drive and loader functions, enclosed Heated Cab with Air Conditioing and sliding window in left door. Right Hand glass standard on all units.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner. Fuel filter with water separator, 1000 CCA battery; variable speed hydraulically driven fan.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Standard two (2) speed transmission is provides a low range of 0 - 6.8 mph and a high range of 0 - 12.4 mph in both forward and reverse. Standard Creep speed provides operation from 0 to 1/2 of full speed for special applications.
12 x 16.5 10 ply, Heavy Duty WIDE TRACK JCB Tires providing 72" width.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc, oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically activated through a switch on the instrument panel or by raising seat bar.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels. Standard electronic throttle control with optional foot throttle.
EFFECTIVE JANUARY 1, 2018 JCB 3TS-8W TELESKID SKID STEER LOADER
JCB 3TS-8W WHEELED TELESKID SKID STEER LOADER
U.S. DOLLAR PRICE PAGES
F.O.B. SAVANNAH, GA
SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8616CSALES Enclosed Cab
CODE ITEM Standard Pkg Build
8720 JCB 3TS-8W Tier 4 Wheeled, Teleskid Telescopic Skid Steer Loader
881A324 12x 16.5 10PR Wide Track HD Tires and Wheels (provides 71.7" width) for Teleskid 3TS-8W
881B401
881 C313
881D300
881E701
881F317
SUGGESTED LIST PRICE $72,573
Enclosed Cab Package - Includes A/C, Heater, Heated Air Suspension Seat, Reverse Alarm & Hydraulic Loader Arm Float - For 3TS-8W Wheeled Teleskid Skid Steer Loader
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with High Flow Hydraulics for 3TS-8T & W Teleskid Telescopic SSL & CTL
No Factory Fit Attachment Option. See List of available buckets and pallet forks to complete machine build.
3TS-8W Wheeled Teleskid Value Package - Includes Foot Throttle, Smooth Ride System (SRS), Attachment Leveling System, Power Quick Hitch, 2 Speed. Dual Pattern Controls, Reversing Fan, ISO/H Pattern, Fender Kit, Radio /Speakers, Block Heater, Twine Cutter and American Language Pack
Dual Standard Auxiliary & High Flow Hydraulic System for 3TS-8T & W Teleskid SSL & CTL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet your requirements, please order a machine using the
F.O.B. SAVANNAH,
GA
BASE MACHINE (E) INDEX
8720 JCB 3TS-8W $57,402
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D303 GP Bucket - 78" - 16.7 cu-ft $1,607
881D304 GP Bucket - 84" - 18.1 cu-ft $1,683
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $1,714
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $1,871
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,025
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,427
Landscape Buckets
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,714
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,871
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,012
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,285
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,042
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,315
6 in 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,382
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,946
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,419
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,018
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,448
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,048
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,665
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,377
JCB 3TS-8W WHEELED TELESKID SKID STEER LOADER
U.S. DOLLAR PRICE PAGES EFFICTIVE JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and/or Attachments from pages 5 to 9.
JCB TELESKID
3TS-8TCOMPACT TRACK LOADER
EFFECTIVE: JANUARY 1, 2018
ISSUE 1
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North AmericanMACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR PRICE PAGES
F.O.B. SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
SAE certified ROPS/FOPS, left side entry. Units are equipped with a heated air suspension seat with adjustable arm pods, an operator restraint interlock for drive and loader functions, enclosed Heated Cab with Air Conditioing and sliding window in left door. Right Hand glass standard on all units.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc, oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically activated through a switch on the instrument panel or by raising seat bar.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels. Standard electronic throttle control with optional foot throttle.
24gpm @ 3335psi standard flow and 33gpm @ 3335psi standard equipment.
Rated Operating Capacity of 3600 lbs, Radial Lift Loader Design providesa radial lift path, and with a two stage telescopic boom, a hinge pin height of 159" (13'-3') and 96" (8') of forward reach. Auxiliary hydraulic circuit and high flow are standard for operation of hydraulic powered attachments. All machines are equipped with: Automatic Attachment Leveling System, Smooth Ride System (SRS), a Sealed Electric Power Quick Hitch and Hydraulic Float.
Cab tilts forward to provide further access to the hydraulic components. The bucket tilt (crowd) cylinder has been repositioned inside the boom, thereby allowing the cab to be tilted for service access without raising the boom. Rear door provides access to engine bay and d il i t d h k i t
EFFECTIVE: JANUARY 1, 2018
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Standaed two (2) speed transmission is provides a low range of 0 - 4.8 mph and a high range of 0 - 7.8 mph in both forward and reverse. Standard Creep speed provides operation from 0 to 1/2 of full speed for special applications.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner. Fuel filter with water separator, 1000 CCA battery; variable speed hydraulically driven fan.
Fitted with 17.7" wide tracks provide a machine width of 78" and a ground bearing pressure of 5.0 psi.
JCB 3TS-8T TELESKID COMPACT TRACK LOADER
All prices and specifications subject to change without notice Page 1 of 1 JCB 320T Compact Tracked USD Price Page Iss 3
JCB 3TS-8T TRACKED COMPACT TRACK LOADER
U.S. DOLLAR PRICE PAGES
F.O.B. SAVANNAH, GA January 1, 2018
SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8616CSALES Enclosed Cab
CODE ITEM Standard Pkg Build
8722 JCB 3TS-8T Tier 4 Tracked, Teleskid Telescopic Compact Track Loader
881A325 17.7" (450 mm) Wide Camso Rubber Tracks - provides a machine width of 77.1" for Teleskid 3TS-8T
881B411
881 C313
881D300
881E702
881F317
SUGGESTED LIST PRICE $89,035
Enclosed Cab Package - Includes A/C, Heater, Heated Air Suspension Seat, Reverse Alarm & Hydraulic Loader Arm Float - For 3TS-8T Tracked Teleskid Compact Track Loader
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with High Flow Hydraulics for 3TS-8T & W Teleskid Telescopic SSL & CTL
No Factory Fit Attachment Option. See List of available buckets and pallet forks to complete machine build.
3TS-8T Tracked Teleskid Value Package - Includes Foot Throttle, Smooth Ride System (SRS), Attachment Leveling System, Power Quick Hitch, 2 Speed. Dual Pattern Controls, Reversing Fan, ISO/H Pattern, Fender Kit, Radio /Speakers, Block Heater and American Language Pack
Dual Standard Auxiliary & High Flow Hydraulic System for 3TS-8T & W Teleskid SSL & CTL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 1 of 1 JCB 320T Compact Tracked USD Price Page Iss 3
F.O.B. SAVANNAH,
GA
U.S. LIST
BASE MACHINE (E) INDEX
8722 JCB 3TS-8T Tekeskid $73,198
GP Buckets
881D303 GP Bucket - 78" - 16.7 cu-ft $1,607
881D304 GP Bucket - 84" - 18.1 cu-ft $1,683
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $1,714
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $1,871
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,025
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,427
Landscape Buckets
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,714
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,871
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,012
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,285
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,042
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,315
6 in 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,382
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,946
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,419
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,018
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,448
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,048
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,665
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,377
U.S. DOLLAR PRICE PAGES JCB 3TS-8T COMPACT TRACK LOADER January 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 1 of 1 JCB 320T Compact Tracked USD Price Page Iss 3
Index
2018
JCB NEW GENERATION
SKID STEER andCOMPACT TRACK
LOADERS
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
Pick a build, click to go to the pages for that code
Model or
Document
Skid Steer or
Compact
Track Loader
Rated
Operating
Capacity
Gross
SAE HP
Loader
Linkage
Hydraulic
Capacity -
Standard Flow
Hydraulic
Capacity -
Optional Hi Flow
Primary
Build
Code
GO!
Notes Notes
155 Skid Steer 1550 lbs 56 Radial Lift18.5gpm @
3335psi
26.4gpm @
3335psi8601 155
175 Skid Steer 1750 lbs 56 Vertical Lift18.5gpm @
3335psi
26.4gpm @
3335psi8602 175
175 AGRI Skid Steer 1750 lbs 56 Vertical Lift18.5gpm @
3335psi
26.4gpm @
3335psi8602 175 AGRI
210 Skid Steer 2100 lbs 74 Radial Lift18.5gpm @
3335psi
30 gpm @
3335psi8A05 210
215 Skid Steer 2150 lbs 74 Vertical Lift18.5gpm @
3335psi
30 gpm @
3335psi8A06 215
250 Skid Steer 2500 lbs 74 Radial Lift24gpm @
3335psi
33gpm @
3335psi8605 250
270 Skid Steer 2700 lbs 74 Vertical Lift24gpm @
3335psi
33gpm @
3335psi8606 270
270 AGRI Skid Steer 2700 lbs 74 Vertical Lift24gpm @
3335psi
33gpm @
3335psi8606 270 AGRI
300 Skid Steer 3000 lbs 74 Vertical Lift24gpm @
3335psi
33gpm @
3335psi8608 300
330 Skid Steer 3300 lbs 74 Vertical Lift24gpm @
3335psi
33gpm @
3335psi8609 330
150T Tracked 1500 lbs 56 Radial Lift18.5gpm @
3335psi
26.4gpm @
3335psi8610 150T
210T Tracked 2100 lbs 74 Radial Lift18.5gpm @
3335psi
30 gpm @
3335psi8A13 210T
215T Tracked 2050 lbs 74 Vertical Lift18.5gpm @
3335psi
30 gpm @
3335psi8A14 215T
250T Tracked 2550 lbs 74 Radial Lift24gpm @
3335psi
33gpm @
3335psi8613 250T
270T AGRI Tracked 2750 lbs 74 Radial Lift24gpm @
3335psi
33gpm @
3335psi8613 270T AGRI
270T AGRI Tracked 2750 lbs 74 Vertical Lift24gpm @
3335psi
33gpm @
3335psi8614 270T AGRI
300T Tracked 3000 lbs 74 Vertical Lift24gpm @
3335psi
33gpm @
3335psi8615 300T
325T FM Tracked 3250 lbs 74 Vertical Lift N/A33gpm @
3335psi8668 325T
Dealer Fit Attachments -- -- -- -- -- -- DF A
Dealer Fit Kits -- -- -- -- -- -- DF K
Specific information on changes that have resulted in new issue of these price pages
Index
2018
JCB SKID STEER LOADER
155NEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
TIRES: Front & Rear
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
JCB 155 SKID STEER LOADER
1.9L (113.5CID) 56 SAE Gross hp, Kohler KDI 1903 TCR engine, centrifugal dry
type dual stage air cleaner. Fuel filter with water separator; 1000 CCA battery;
variable speed hydraulically driven fan.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0
to 7.5 mph in both forward and reverse. Standard Creep speed provides operation
from 0 - 1/2 of full speed. An optional two speed transmission is available providing
a low range of 0 - 7.5 mph and a high range of 0 - 11.5 mph
10 x 16.5 8 ply, Heavy Duty WIDE TRACK JCB Tires providing 63" width.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and operator
restraint interlock for drive and loader functions. Cab units are pressurized and
available with heat or heat and A/C, sliding left window and full side door. Right
Hand glass as standard on canopy and cab builds.
Cab tilts forward to provide further access to the hydraulic components. Rear
door provides class leading access to engine bay and daily maintenance check
points.
Rated Operating Capacity of 1550 lbs, Radial Lift Loader Design provides for
maximum loader lift breakout force for superior digging performance. Auxiliary
circuit is standard for operation of hydraulic powered attachments. Choice of
Standard Mechanical or Optional Powered Quick Hitch. Hydraulic Float standard
on all models. Loader Options include: Parallel Lift in raise only and SRS (smooth
ride system).
18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.
Machine braking provided through the hydrostatic transmission. Parking brake
consists of multiple disc, oil immersed, spring applied hydraulic release that provides
a fail safe with the engine off. Electrically activated through a switch on the
instrument panel or by raising seat bar.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights - 2 Front
and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.
All prices and specifications subject to change without notice Page 5 of 217 JCB 155 Skid Steer USD Price Page Iss 2
JCB 155 SKID STEER LOADER U.S. DOLLAR PRICE PAGESF.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8601A 8601BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8601 JCB 155 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width)
881B204
881B224
881C202 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F208
881G295
881G305 Block Heater - 110V Kohler Engine
881G201 Foot Throttle
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155, 210, 150T, 210T)
881G312 Parallel Lift (Raise Only) - Radial Lift - High Flow (155, 210, 150T, 210T)
881G280 2 Speed Motors - Wheeled
881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift)
SUGGESTED LIST PRICE $37,150 $45,634
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch - 3 CYL
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick
Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch -
3 CYL
ISO & Dual Hand Control Pattern
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 6 of 217 JCB 155 Skid Steer USD Price Page Iss 2
U.S. DOLLAR PRICE
PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8601 JCB 155 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader $32,467
TIRE SETS (E) pick one
881A201 10 x 16.5 8PR HD Tires & Wheels (provides 59.8" width) $0
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width) $50
881A205 10 x 16.5 10PR Lifemaster Industrial Pneumatic Tires & Wheels (provides 59.8" width) $779
881A206 10 x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Tire & Wheels (provides 63" width) $807
881A207 31.5/13 x 16.5 8PR SK Hauler High Floatation Tires & Wheels (provides 64.7" width) $974
881A208 7 x 15 Solid Industrial Tires and Wheels (provides 54.3" width) $1,558
881A209 10 x 16.5 Brawler Solid Flex Industrial Tires & Wheels (provides 59.8" width) $1,948
881A213 7 x 15 14PR Pneumatic Tires and Wheels (provides 53.9" width) $890
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B204 $766
Cab with Heater Packages
881B214 $2,839
Cab with Heater and A/C Packages
881B224 $4,660
MACHINE CONTROLS (E)
881C202 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics $1,147
881C205 $1,748
JCB 155 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch - 3 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 3 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 3 CYL
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 7 of 217 JCB 155 Skid Steer USD Price Page Iss 2
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D346 GP Bucket - 54" - 12.5 cu-ft $1,094
881D347 GP Bucket - 60" - 12.7 cu-ft $1,119
881D301 GP Bucket - 66" - 14.1 cu-ft $1,145
881D340 GP Bucket - 68" - 14.3 cu-ft $1,262
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,801
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,834
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,831
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,862
Landscape Buckets
881D348 Landscape Bucket - 54" - 14.2 cu-ft $1,157
881D349 Landscape Bucket - 60" - 15.8 cu-ft $1,196
881D305 Landscape Bucket - 66" - 17.5 cu-ft $1,221
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,799
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,827
6 in 1 Buckets
881D365 6 In 1 Multipurpose Bucket - 60" - 12.2 cu-ft $3,480
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft $3,562
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,546
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,575
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
U.S. DOLLAR PRICE PAGESJCB 155 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 8 of 217 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F208 $1,136
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G315 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $953
881G316 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $953
881G254 Worklights with 2 rear lights for non A/C machines $145
881G305 Block Heater - 110V Kohler Engine $145
881G231 Rotating Beacon and Socket $151
881G304 White Noise Reverse Alarm $204
Loader Options
881G282 Powered Quick Hitch $846
881G285 SRS, Smooth Ride System - Radial $1,085
881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift) $1,085
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155, 210, 150T, 210T) $533
881G312 Parallel Lift (Raise Only) - Radial Lift - High Flow (155, 210, 150T, 210T) $533
Hydraulic Options
881G314 Biodegradable Oils $327
Operators Compartment Options
881G201 Foot Throttle $211
881G295 ISO & Dual Hand Control Pattern $166
881G211 Key Start/ Key Immobilizer - All machine configurations $435
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G279 Vinyl Mechanical Suspension Seat $259
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $666
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $752
881G220 3 inch wide Seatbelt $63
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $289
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $193
881G222 Radio with Speakers, Aerial and MP3 cable $323
881G310 Additional Soundproofing (for special applications) $473
U.S. DOLLAR
PRICE PAGESJCB 155 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 9 of 217 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G280 2 Speed Motors - Wheeled $1,623
881G229 Twine Cutter - Wheeled Machines Only $145
881G287 Reversing Fan $908
881G288 Tool Kit, Basic $348
881G289 Tool Kit, Full $516
881G294 External Anolog Engine Hourmeter $146
881G308 Pre-Cleaner T4 $502
881G296 Spark Arrestor Muffler - 3 CYL $249
Impact Protection and Guards
881G208 Impact Protection - Laminated Glass - for Canopy Builds $579
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $926
881G209 Impact Protection - Lexan Glass - for Canopy Builds $1,653
881G303 Laminate Glass to replace tempered as standard on cab builds $134
881G236 Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the full left side door$723
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $727
881G258 Right Hand Mesh to Replace Glass as Standard $203
881G267 Heavy Duty Rear Bars - Protective Bars for Adverse Applications (as a stand alone option) $1,196
881G290 Canopy Wheeled Fender & Fuel Cap Protection $130
881G291 Cab Wheeled Fender & Fuel Cap Protection $130
881G307 A/C FOPS Guard $556
APPLICATION PACKAGES
881G214 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G208 $2,170
881G215 Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G208$3,617
881G216 Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G208 $3,256
881G251 Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass (Not for Canopy Builds)$2,465
881G252 Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been ordered$1,076
881G261 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only $2,058
881G262 Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only$3,501
881G263 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only $3,136
881G264 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines Only $3,009
881G265 Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only$4,514
881G266 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only $4,162
BUCKET ACCESSORIES
881H319 Bolt on Edge for 54" Bucket (1372mm) $259
881H320 Bolt on Edge for 60" Bucket (1524mm) $278
881H301 Bolt on Edge for 66" Bucket (1676mm) $298
881H325 Bolt on Edge for 68" Bucket (1727mm) $308
881H321 Tooth Bar for 54" Bucket - Over Bucket (1372mm) $591
881H322 Tooth Bar for 60" Bucket - Over Bucket (1524mm) $619
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $763
881H326 Tooth Bar for 68" Bucket - Over Bucket (1727mm) $648
881H323 Tooth Bar for 54" Bucket - Over Bolt on Edge (1372mm) $661
881H324 Tooth Bar for 60" Bucket - Over Bolt on Edge (1524mm) $687
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $692
881H327 Tooth Bar for 68" Bucket - Over Bolt on Edge (1727mm) $916
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
JCB 155 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 10 of 217 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F208
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Snow Removal Attachments
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U659 72" Snow Blower - High Flow Small Platform Only 334/L2463 $9,809
881U670 72" Snow Push 333/X6486 $3,107
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
EFFECTIVE: JANUARY 1, 2018 JCB 155 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 11 of 217 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F208
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex $480
881U459 9" X 4' Heavy Duty Auger 2" Hex $647
881U460 12" X 4' Heavy Duty Auger 2" Hex $735
881U461 15" X 4' Heavy Duty Auger 2" Hex $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" $171
881U471 Hex. Drive Extension - 18" $252
881U472 Hex. Drive Extension - 24" $334
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow $6,088
881U473 60" Landscape Power Rake with Manual Angle $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle $11,788
333/L8191
333/L6180
333/L6126
980/L7273
980/L7251
980/L7257
980/L7267
980/L7270
980/L7271
980/L7272
JCB 155 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
EFFECTIVE: JANUARY 1, 2018
980/A2039
980/A2032
980/A3001
980/A2031
980/A2034
980/A2035
980/A2037
980/A2038
All prices and specifications subject to change without notice Page 12 of 217 JCB 155 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F208
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple $2,466
881U531 66" Manure Forks with Top Grapple $3,727
881U532 Bale Spear $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow $5,242
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow $21,788
333/L8251
EFFECTIVE: JANUARY 1, 2018
332/X4299
332/X4300
333/L5627
332/L7272
332/L7251
332/X4294
332/X4295
332/X4382
JCB 155 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
333/L6079
333/L6106
All prices and specifications subject to change without notice Page 13 of 217 JCB 155 Skid Steer USD Price Page
Index
2018
JCB SKID STEER LOADER
175NEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
JCB 175 SKID STEER LOADER
Rated Operating Capacity of 1750 lbs, Vertical Lift Loader Design provides vertical lift path and increased
reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic powered
attachments. Choice of Standard Mechanical or Optional Powered Quick Hitch. Hydraulic Float standard on
all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride system).
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc, oil
immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically activated
through a switch on the instrument panel or by raising seat bar.
18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
EFFECTIVE: JANUARY 1, 2018
Cab tilts forward to provide further access to the hydraulic components. Rear door
provides class leading access to engine bay and daily maintenance and check points.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and operator restraint
interlock for drive and loader functions. Cab units are pressurized and available with
heat or heat and A/C, sliding left window and full side door. Right Hand glass as
standard on canopy and cab builds.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear, Reverse Alarm,
Horn, and 12V Accessory Socket.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 7.5 mph in both
forward and reverse. Standard Creep speed provides operation from 0 to 1/2 of full speed for special
applications. An optional two (2) speed transmission is available providing a low range of 0 - 7.5 mph and a
high range of 0 - 11.5 mph.
1.9L (113.5CID) 56 SAE Gross hp, Kohler KDI 1903 TCR engine, centrifugal dry type dual stage air cleaner.
Fuel filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.
10 x 16.5 8 ply, Heavy Duty WIDE TRACK JCB Tires providing 63" width.
All prices and specifications subject to change without notice Page 16 of 217 JCB 175 Skid Steer USD Price Page Iss 2
JCB 175 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8602A 8602B 8602CSALES CANOPY CAB CAB
CODE ITEM STD FLOW HIGH FLOW HIGH FLOW
8602 JCB 175 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width)
881B204
881B224
881C202 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F206
881G201 Foot Throttle
881G222 Radio with Speakers, Aerial and MP3 cable
881G254 Worklights with 2 rear lights for non A/C machines
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods
881G279 Vinyl Mechanical Suspension Seat
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 215, 215T)
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 215, 215T)
881G280 2 Speed Motors - Wheeled
881G282 Powered Quick Hitch
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift)
881G287 Reversing Fan
881G295 ISO & Dual Hand Control Pattern
881G305 Block Heater - 110V Kohler Engine
SUGGESTED LIST PRICE $41,185 $47,078 $48,926
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch - 3 CYL
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick
Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch -
3 CYL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 17 of 217 JCB 175 Skid Steer USD Price Page Iss 2
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8602 JCB 175 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $34,088
TIRE SETS (E) pick one
881A201 10 x 16.5 8PR HD Tires & Wheels (provides 59.8" width) $0
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width) $50
881A205 10 x 16.5 10PR Lifemaster Industrial Pneumatic Tires & Wheels (provides 59.8" width) $779
881A206 10 x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Tire & Wheels (provides 63" width) $807
881A207 31.5/13 x 16.5 8PR SK Hauler High Floatation Tires & Wheels (provides 64.7" width) $974
881A208 7 x 15 Solid Industrial Tires and Wheels (provides 54.3" width) $1,558
881A209 10 x 16.5 Brawler Solid Flex Industrial Tires & Wheels (provides 59.8" width) $1,948
881A213 7 x 15 14PR Pneumatic Tires and Wheels (provides 53.9" width) $890
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B204 $766
Cab with Heater Packages
881B214 $2,839
Cab with Heater and A/C Packages
881B224 $4,660
MACHINE CONTROLS (E)
881C202 $1,147
881C205 $1,748
JCB 175 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch - 3 CYL
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 3 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 3 CYL
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 18 of 217 JCB 175 Skid Steer USD Price Page Iss 2
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D347 GP Bucket - 60" - 12.7 cu-ft $1,119
881D301 GP Bucket - 66" - 14.1 cu-ft $1,145
881D340 GP Bucket - 68" - 14.3 cu-ft $1,262
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,801
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,834
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,831
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,862
Landscape Buckets
881D349 Landscape Bucket - 60" - 15.8 cu-ft $1,196
881D305 Landscape Bucket - 66" - 17.5 cu-ft $1,221
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,799
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,827
6 in 1 Buckets
881D365 6 In 1 Multipurpose Bucket - 60" - 12.2 cu-ft $3,480
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft $3,562
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,546
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,575
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
U.S. DOLLAR PRICE PAGES JCB 175 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 19 of 217 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F206 High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option) $1,136
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G315 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $953
881G316 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $953
881G254 Worklights with 2 rear lights for non A/C machines $145
881G305 Block Heater - 110V Kohler Engine $145
881G231 Rotating Beacon and Socket $151
881G304 White Noise Reverse Alarm $204
Loader Options
881G282 Powered Quick Hitch $846
881G283 SRS, Smooth Ride System - Vertical Lift $1,085
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift) $1,085
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 215, 215T) $533
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 215, 215T) $533
Hydraulic Options
881G314 Biodegradable Oils $327
Operators Compartment Options
881G201 Foot Throttle $211
881G295 ISO & Dual Hand Control Pattern $166
881G211 Key Start/ Key Immobilizer - All machine configurations $435
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G279 Vinyl Mechanical Suspension Seat $259
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $666
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $752
881G220 3 inch wide Seatbelt $63
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $289
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $193
881G222 Radio with Speakers, Aerial and MP3 cable $323
881G310 Additional Soundproofing (for special applications) $473
U.S. DOLLAR
PRICE PAGES JCB 175 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 20 of 217 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G280 2 Speed Motors - Wheeled $1,623
881G229 Twine Cutter - Wheeled Machines Only $145
881G287 Reversing Fan $908
881G288 Tool Kit, Basic $348
881G289 Tool Kit, Full $516
881G294 External Anolog Engine Hourmeter $146
881G308 Pre-Cleaner T4 $502
881G296 Spark Arrestor Muffler - 3 CYL $249
IMPACT PROTECTION AND GUARDS
881G208 Impact Protection - Laminated Glass - for Canopy Builds $579
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $926
881G209 Impact Protection - Lexan Glass - for Canopy Builds $1,653
881G303 Laminate Glass to replace tempered as standard on cab builds $134
881G236 Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the full left side door$723
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $727
881G258 Right Hand Mesh to Replace Glass as Standard $203
881G267 Heavy Duty Rear Bars - Protective Bars for Adverse Applications (as a stand alone option) $1,196
881G290 Canopy Wheeled Fender & Fuel Cap Protection $130
881G291 Cab Wheeled Fender & Fuel Cap Protection $130
881G307 A/C FOPS Guard $556
APPLICATION PACKAGES
881G214 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G208 $2,170
881G215 Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G208$3,617
881G216 Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G208 $3,256
881G251 Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass (Not for Canopy Builds)$2,465
881G252 Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been ordered$1,076
881G261 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only $2,058
881G262 Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only$3,501
881G263 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only $3,136
881G264 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines Only $3,009
881G265 Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only$4,514
881G266 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only $4,162
881G322 $5,192
BUCKET ACCESSORIES
881H320 Bolt on Edge for 60" Bucket (1524mm) $278
881H301 Bolt on Edge for 66" Bucket (1676mm) $298
881H325 Bolt on Edge for 68" Bucket (1727mm) $308
881H322 Tooth Bar for 60" Bucket - Over Bucket (1524mm) $619
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $763
881H326 Tooth Bar for 68" Bucket - Over Bucket (1727mm) $648
881H324 Tooth Bar for 60" Bucket - Over Bolt on Edge (1524mm) $687
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $692
881H327 Tooth Bar for 68" Bucket - Over Bolt on Edge (1727mm) $916
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
JCB 175 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
AGRI Package Build - Wheeled (Includes: Radio, Heated Vinyl Suspension Seat, Block Heater, Twine Cutter, 2 Speed, Quickhitch, SRS,
Foot Throttle, Parallel Lift, ISO & Dual Pattern Change Over)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 21 of 217 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Snow Removal Attachments
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U659 72" Snow Blower - High Flow Small Platform Only 334/L2463 $9,809
881U670 72" Snow Push 333/X6486 $3,107
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
EFFECTIVE: JANUARY 1, 2018 JCB 175 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 22 of 217 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
EFFECTIVE: JANUARY 1, 2018 JCB 175 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 23 of 217 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
EFFECTIVE: JANUARY 1, 2018 JCB 175 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
All prices and specifications subject to change without notice Page 24 of 217 JCB 175 Skid Steer USD Price Page
Index
2018
JCB SKID STEER LOADER
210NEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
JCB 210 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
2.5L (151.4CID) 74 SAE Gross hp, Kohler KDI 2504 TCR engine, centrifugal dry
type dual stage air cleaner. Fuel filter with water separator; 1000 CCA battery;
variable speed hydraulically driven fan.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 7.5 mph in both
forward and reverse. Standard Creep speed provides operation from 0 - 1/2 of full speed for special
applications. An optional two speed transmission is available providing a low range of 0 - 7.5 mph and
a high range of 0 - 11.5 mph.
10 x 16.5 8 ply, Heavy Duty WIDE TRACK JCB Tires providing 63" width.
LOADER Rated Operating Capacity of 2100 lbs, Radial Lift Loader Design provides Radial lift path and increased
reach at mid point vs. Vertical Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Powered Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only and SRS (smooth ride
system).
Cab tilts forward to provide further access to the hydraulic components. Rear door
provides class leading access to engine bay and daily maintenance and check points.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear, Reverse
Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and operator
restraint interlock for drive and loader functions. Cab units are pressurized and
available with heat or heat and A/C, sliding left window and full side door. Right
Hand glass as standard on canopy and cabs.
18.5gpm @ 3335psi standard flow. Optional 30gpm @ 3335psi available.
All prices and specifications subject to change without notice Page 27 of 217 JCB 205 Skid Steer USD Price Page Iss 2
JCB 210 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8A05A 8A05B 8A05CSALES CANOPY CAB CAB
CODE ITEM STD FLOW HIGH FLOW HIGH FLOW
8A05 JCB 210 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width)
881B206
881B226
881C202 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C205
881D302 GP Bucket - 72" - 15.4 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F213 High Flow Hydraulics RL- 30 gpm (Requires 7 way Multi-Function Joystick Option)
881G201 Foot Throttle
881G254 Worklights with 2 rear lights for non A/C machines
881G279 Vinyl Mechanical Suspension Seat
881G280 2 Speed Motors - Wheeled
881G282 Powered Quick Hitch
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift)
881G287 Reversing Fan
881G295 ISO & Dual Hand Control Pattern
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 215, 215T)
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 215, 215T)
881G305 Block Heater - 110V Kohler Engine
SUGGESTED LIST PRICE $43,645 $47,294 $50,540
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch -
4 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch - 4 CYL
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 28 of 217 JCB 205 Skid Steer USD Price Page Iss 2
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8A05 JCB 210 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader $35,626
TIRE SETS (E) pick one
881A201 10 x 16.5 8PR HD Tires & Wheels (provides 59.8" width) $0
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width) $50
881A205 10 x 16.5 10PR Lifemaster Industrial Pneumatic Tires & Wheels (provides 59.8" width) $779
881A206 10 x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Tire & Wheels (provides 63" width) $807
881A207 31.5/13 x 16.5 8PR SK Hauler High Floatation Tires & Wheels (provides 64.7" width) $974
881A208 7 x 15 Solid Industrial Tires and Wheels (provides 54.3" width) $1,558
881A209 10 x 16.5 Brawler Solid Flex Industrial Tires & Wheels (provides 59.8" width) $1,948
881A213 7 x 15 14PR Pneumatic Tires and Wheels (provides 53.9" width) $890
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B206 $766
Cab with Heater Packages
881B216 $2,839
Cab with Heater and A/C Packages
881B226 $4,660
MACHINE CONTROLS (E)
881C202 $1,147
881C205 $1,748JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
JCB 210 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch - 4 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 4 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 4 CYL
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 29 of 217 JCB 205 Skid Steer USD Price Page Iss 2
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D301 GP Bucket - 66" - 14.1 cu-ft $1,145
881D340 GP Bucket - 68" - 14.3 cu-ft $1,262
881D302 GP Bucket - 72" - 15.4 cu-ft $1,221
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,801
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,834
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,889
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,831
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,862
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,919
Landscape Buckets
881D305 Landscape Bucket - 66" - 17.5 cu-ft $1,221
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,310
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,799
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,904
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,827
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,933
6 in 1 Buckets
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft $3,562
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft $3,837
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,546
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,837
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,575
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,866
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
JCB 210 SKID STEER LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
All prices and specifications subject to change without notice Page 30 of 217 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F213 High Flow Hydraulics VL- 30 gpm (Requires 7 way Multi-Function Joystick Option) $1,136
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G315 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $953
881G316 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $953
881G254 Worklights with 2 rear lights for non A/C machines $145
881G305 Block Heater - 110V Kohler Engine $145
881G231 Rotating Beacon and Socket $151
881G304 White Noise Reverse Alarm $204
Loader Options
881G282 Powered Quick Hitch $846
881G283 SRS, Smooth Ride System - Vertical Lift $1,085
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift) $1,085
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155, 210, 150T, 210T) $533
881G312 Parallel Lift (Raise Only) - Radial Lift - High Flow (155, 210, 150T, 210T) $533
Hydraulic Options
881G314 Biodegradable Oils $327
Operators Compartment Options
881G201 Foot Throttle $211
881G295 ISO & Dual Hand Control Pattern $166
881G211 Key Start/ Key Immobilizer - All machine configurations $435
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G279 Vinyl Mechanical Suspension Seat $259
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $666
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $752
881G220 3 inch wide Seatbelt $63
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $289
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $193
881G222 Radio with Speakers, Aerial and MP3 cable $323
881G310 Additional Soundproofing (for special applications) $473
JCB 210 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 31 of 217 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G229 Twine Cutter - Wheeled Machines Only $145
881G280 2 Speed Motors - Wheeled $1,623
881G287 Reversing Fan $908
881G288 Tool Kit, Basic $348
881G289 Tool Kit, Full $516
881G294 External Anolog Engine Hourmeter $146
881G308 Pre-Cleaner T4 $502
881G399 Spark Arrestor Muffler - 4 CYL 55 KW Engines (210,215,210T,215T) $249
Impact Protection/Guards
881G209 Impact Protection - Lexan Glass - for Canopy Builds $1,653
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $926
881G208 Impact Protection - Laminated Glass - for Canopy Builds $579
881G303 Laminate Glass to replace tempered as standard on cab builds $134
881G236 Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the full left side door$723
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $727
881G258 Right Hand Mesh to Replace Glass as Standard $203
881G267 Heavy Duty Rear Bars - Protective Bars for Adverse Applications (as a stand alone option) $1,196
881G290 Canopy Wheeled Fender & Fuel Cap Protection $130
881G291 Cab Wheeled Fender & Fuel Cap Protection $130
881G307 A/C FOPS Guard $556
APPLICATION PACKAGES
881G214 $2,170
881G215 $3,617
881G216 $3,256
881G251 $2,465
881G252 $1,076
881G261 $2,058
881G262 $3,501
881G263 $3,136
881G264 $3,009
881G265 $4,514
881G266 $4,162
BUCKET ACCESSORIES
881H301 Bolt on Edge for 66" Bucket (1676mm) $298
881H325 Bolt on Edge for 68" Bucket (1727mm) $308
881H302 Bolt on Edge for 72" Bucket (1727mm) $318
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $763
881H326 Tooth Bar for 68" Bucket - Over Bucket (1727mm) $648
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $664
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $692
881H327 Tooth Bar for 68" Bucket - Over Bolt on Edge (1727mm) $916
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $926
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G208
JCB 210 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G208
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars - Canopy
machines must order G208
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Canopy
Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide protection
over laminated cab glass (Not for Canopy Builds)Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass -
Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been ordered
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab
Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines Only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 32 of 217 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U659 72" Snow Blower - High Flow Small Platform Only 334/L2463 $9,809
881U670 72" Snow Push 333/X6486 $3,107
Grapple Attachment
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
JCB 210 SKID STEER LOADER U.S. DOLLAR PRICE PAGESEFFECTIVE: JANUARY 1,
2018
All prices and specifications subject to change without notice Page 33 of 217 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub $0
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions $0
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools $0
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
JCB 210 SKID STEER LOADERU.S. DOLLAR PRICE
PAGES
EFFECTIVE: JANUARY 1,
2018
All prices and specifications subject to change without notice Page 34 of 217 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
JCB 210 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
EFFECTIVE: JANUARY
1, 2018
All prices and specifications subject to change without notice Page 35 of 217 JCB 205 Skid Steer USD Price Page
Index
2018
JCB SKID STEER LOADER
215NEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
LOADER Rated Operating Capacity of 2150 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Powered Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only and SRS (smooth ride
system).
Cab tilts forward to provide further access to the hydraulic components. Rear door
provides class leading access to engine bay and daily maintenance and check points.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear, Reverse
Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and operator
restraint interlock for drive and loader functions. Cab units are pressurized and
available with heat or heat and A/C, sliding left window and full side door. Right
Hand glass as standard on canopy and cabs.
18.5gpm @ 3335psi standard flow. Optional 30gpm @ 3335psi available.
EFFECTIVE: JANUARY 1, 2018
2.5L (151.4CID) 74 SAE Gross hp, Kohler KDI 2504 TCR engine, centrifugal dry
type dual stage air cleaner. Fuel filter with water separator; 1000 CCA battery;
variable speed hydraulically driven fan.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 7.5 mph in both
forward and reverse. Standard Creep speed provides operation from 0 - 1/2 of full speed for special
applications. An optional two speed transmission is available providing a low range of 0 - 7.5 mph and
a high range of 0 - 11.5 mph.
10 x 16.5 8 ply, Heavy Duty WIDE TRACK JCB Tires providing 63" width.
JCB 215 SKID STEER LOADER
All prices and specifications subject to change without notice Page 38 of 217 JCB 205 Skid Steer USD Price Page Iss 2
JCB 215 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, EFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8A06A 8A06B 8A06CSALES CANOPY CAB CAB
CODE ITEM STD FLOWHIGH FLOWHIGH FLOW
8A06 JCB 215 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width)
881B206
881B226
881C202 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C205
881D302 GP Bucket - 72" - 15.4 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F214 High Flow Hydraulics VL- 30 gpm (Requires 7 way Multi-Function Joystick Option)
881G201 Foot Throttle
881G254 Worklights with 2 rear lights for non A/C machines
881G279 Vinyl Mechanical Suspension Seat
881G280 2 Speed Motors - Wheeled
881G282 Powered Quick Hitch
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift)
881G287 Reversing Fan
881G295 ISO & Dual Hand Control Pattern
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 215, 215T)
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 215, 215T)
881G305 Block Heater - 110V Kohler Engine
SUGGESTED LIST PRICE $44,155 $47,804 $51,050
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch - 4 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader
Arm Float and Mechanical Quickhitch - 4 CYL
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment
Harness. Required with High Flow Hydraulics
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 39 of 217 JCB 205 Skid Steer USD Price Page Iss 2
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8A06 JCB 215 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $36,136
TIRE SETS (E) pick one
881A201 10 x 16.5 8PR HD Tires & Wheels (provides 59.8" width) $0
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width) $50
881A205 10 x 16.5 10PR Lifemaster Industrial Pneumatic Tires & Wheels (provides 59.8" width) $779
881A206 10 x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Tire & Wheels (provides 63" width) $807
881A207 31.5/13 x 16.5 8PR SK Hauler High Floatation Tires & Wheels (provides 64.7" width) $974
881A208 7 x 15 Solid Industrial Tires and Wheels (provides 54.3" width) $1,558
881A209 10 x 16.5 Brawler Solid Flex Industrial Tires & Wheels (provides 59.8" width) $1,948
881A213 7 x 15 14PR Pneumatic Tires and Wheels (provides 53.9" width) $890
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B206 $766
Cab with Heater Packages
881B216 $2,839
Cab with Heater and A/C Packages
881B226 $4,660
MACHINE CONTROLS (E)
881C202 $1,147
881C205 $1,748JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
JCB 215 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch -
4 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 4 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch - 4 CYL
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
To complete a machine order, select one code from each E (Essential) feature category below.
All prices and specifications subject to change without notice Page 40 of 217 JCB 205 Skid Steer USD Price Page Iss 2
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D301 GP Bucket - 66" - 14.1 cu-ft $1,145
881D340 GP Bucket - 68" - 14.3 cu-ft $1,262
881D302 GP Bucket - 72" - 15.4 cu-ft $1,221
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,801
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,834
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,889
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,831
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,862
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,919
Landscape Buckets
881D305 Landscape Bucket - 66" - 17.5 cu-ft $1,221
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,310
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,799
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,904
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,827
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,933
6 in 1 Buckets
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft $3,562
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft $3,837
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,546
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,837
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,575
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,866
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
JCB 215 SKID STEER LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
All prices and specifications subject to change without notice Page 41 of 217 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F214 High Flow Hydraulics VL- 30 gpm (Requires 7 way Multi-Function Joystick Option) $1,136
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G315 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $953
881G316 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $953
881G254 Worklights with 2 rear lights for non A/C machines $145
881G305 Block Heater - 110V Kohler Engine $145
881G231 Rotating Beacon and Socket $151
881G304 White Noise Reverse Alarm $204
Loader Options
881G282 Powered Quick Hitch $846
881G283 SRS, Smooth Ride System - Vertical Lift $1,085
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift) $1,085
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 215, 215T) $533
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 215, 215T) $533
Hydraulic Options
881G314 Biodegradable Oils $327
Operators Compartment Options
881G201 Foot Throttle $211
881G295 ISO & Dual Hand Control Pattern $166
881G211 Key Start/ Key Immobilizer - All machine configurations $435
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G279 Vinyl Mechanical Suspension Seat $259
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $666
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $752
881G220 3 inch wide Seatbelt $63
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $289
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $193
881G222 Radio with Speakers, Aerial and MP3 cable $323
881G310 Additional Soundproofing (for special applications) $473
JCB 215 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 42 of 217 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH, GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G229 Twine Cutter - Wheeled Machines Only $145
881G280 2 Speed Motors - Wheeled $1,623
881G287 Reversing Fan $908
881G288 Tool Kit, Basic $348
881G289 Tool Kit, Full $516
881G294 External Anolog Engine Hourmeter $146
881G308 Pre-Cleaner T4 $502
881G399 Spark Arrestor Muffler - 4 CYL 55 KW Engines (210,215,210T,215T) $249
Impact Protection and Guards
881G209 Impact Protection - Lexan Glass - for Canopy Builds $1,653
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $926
881G208 Impact Protection - Laminated Glass - for Canopy Builds $579
881G303 Laminate Glass to replace tempered as standard on cab builds $134
881G236 Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the full left side door$723
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $727
881G258 Right Hand Mesh to Replace Glass as Standard $203
881G267 Heavy Duty Rear Bars - Protective Bars for Adverse Applications (as a stand alone option) $1,196
881G290 Canopy Wheeled Fender & Fuel Cap Protection $130
881G291 Cab Wheeled Fender & Fuel Cap Protection $130
881G307 A/C FOPS Guard $556
APPLICATION PACKAGES
881G214 $2,170
881G215 $3,617
881G216 $3,256
881G251 $2,465
881G252 $1,076
881G261 $2,058
881G262 $3,501
881G263 $3,136
881G264 $3,009
881G265 $4,514
881G266 $4,162
BUCKET ACCESSORIES
881H301 Bolt on Edge for 66" Bucket (1676mm) $298
881H325 Bolt on Edge for 68" Bucket (1727mm) $308
881H302 Bolt on Edge for 72" Bucket (1727mm) $318
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $763
881H326 Tooth Bar for 68" Bucket - Over Bucket (1727mm) $648
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $664
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $692
881H327 Tooth Bar for 68" Bucket - Over Bolt on Edge (1727mm) $916
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $926
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Canopy Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass (Not for Canopy Builds)Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated
cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been ordered
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Cab Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G208
JCB 215 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order
G208Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars -
Canopy machines must order G208
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 43 of 217 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U659 72" Snow Blower - High Flow Small Platform Only 334/L2463 $9,809
881U670 72" Snow Push 333/X6486 $3,107
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
Auger Drive Units $0
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
JCB 215 SKID STEER LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 44 of 217 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
JCB 215 SKID STEER LOADER U.S. DOLLAR PRICE PAGESEFFECTIVE: JANUARY 1,
2018
All prices and specifications subject to change without notice Page 45 of 217 JCB 205 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
JCB 215 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 46 of 217 JCB 205 Skid Steer USD Price Page
Index
2018
JCB SKID STEER LOADER
250NEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
LOADER Rated Operating Capacity of 2225 lbs, Radial Lift Loader Design provides for maximum loader lift breakout
force for superior digging performance. Auxiliary circuit is standard for operation of hydraulic powered
attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic Float standard on
all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride system), left hand auxiliary
pipework.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides class
leading access to engine bay and daily maintenance and check points.
Meets IP69 water ingress standard. Worklights, 2 Front and 1 Rear, Reverse Alarm, Horn, and 12V
Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels. Standard electronic
throttle control with optional foot throttle.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with retractable seatbelt and operator restraint
interlock for drive and loader functions. Cab units are pressurized and available with heat or heat and
A/C, sliding left window and full side door. Right Hand glass standard on canopy and cab builds.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner; Fuel
filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Standard Creep speed provides operation
from 0 - 1/2 of full speed for special applications. An optional two speed transmission is available
providing a low range of 0 - 6.8 mph and a high range of 0 - 12.4 mph
12 x 16.5 10 ply, Heavy Duty JCB Tires providing 67.9" width.
JCB 250 SKID STEER LOADER
All prices and specifications subject to change without notice Page 49 of 217 JCB 225 Skid Steer USD Price Page Iss 3
JCB 250 SKID STEER LOADER U.S. DOLLAR PRICE PAGESF.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8605A 8605B 8605CSALES CANOPY CAB CAB
CODE ITEM STD FLOW STD FLOW HIGH FLOW
8605 JCB 250 Wheeled, Radial Lift, New Generation, Skid Steer Loader
881A302 12 x 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width)
881B309
881B329
881C311 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C312
881D302
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F307 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F308
881G022
881G025 Engine Block Heater - 110V
881G073 2 Speed - Wheeled Machines
881G075 Powered Quick Hitch
881G076 Worklights with 2 rear lights for non A/C machines
881G077 Smooth Ride System (SRS)
881G084 Foot Throttle
881G085 Reversing Fan - Global (Gear Pump)
881G091 Vinyl Air Suspension Seat
881G105 Vinyl Mechanical Suspension Seat
881G095 Parallel Lift Radial Lift Models - 250, 250T
881G096 ISO & Dual Hand Control Pattern Changeover
SUGGESTED LIST PRICE $44,984 $49,018 $54,750
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
GP Bucket - 72" - 15.4 cu-ft
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Radio with Speakers and Aerial
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet y our
requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 50 of 217 JCB 225 Skid Steer USD Price Page Iss 3
U.S. DOLLAR PRICE
PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8605 JCB 250 Wheeled, Radial Lift, New Generation, Skid Steer Loader $38,578
TIRE SETS (E) pick one
881A301 12 x 16.5 10PR HD Tires and Wheels (provides 67.9" width) $0
881A302 12 x 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width) $58
881A305 12 x 16.5 10PR Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 67.9" width) $880
881A306 12 x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 71.7" width) $926
881A307 33/15.5 x 16.5 14PR SK Hauler High Floatation Tires and Wheels (provides 72" width) $1,100
881A308 8 x 16 Solid Industrial Tires and Wheels (provides 63" width) $1,736
881A309 12 x 16.5 Brawler Solid Flex Industrial Tires and Wheels (provides 66" width) $2,604
881A316 12 x 16.5 Slick Brawler Solid Flex Industrial $2,748
881A317 12 x 16.5 Michelin Bibsteer HD Wide Track Tires and Wheels $1,268
881A318 12 x 16.5 Michelin Bibsteer HD Tires and Wheels $1,207
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B309 $942
Cab with Heater Packages
881B319 $3,050
Cab with Heater and A/C Packages
881B329 $5,020
MACHINE CONTROLS (E)
881C311 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics $1,156
881C312 $1,746
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
JCB 250 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
All prices and specifications subject to change without notice Page 51 of 217 JCB 225 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D301 GP Bucket - 66" - 14.1 cu-ft $1,145
881D340 GP Bucket - 68" - 14.3 cu-ft $1,262
881D302 GP Bucket - 72" - 15.4 cu-ft $1,221
881D341 GP Bucket - 75" - 15.8 cu-ft $1,399
881D303 GP Bucket - 78" - 16.7 cu-ft $1,603
881D304 GP Bucket - 84" - 18.1 cu-ft $1,679
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,801
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,834
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,889
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,940
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,990
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,390
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,831
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,862
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,919
881D345 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,969
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,018
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,419
Landscape Buckets
881D305 Landscape Bucket - 66" - 17.5 cu-ft $1,221
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,310
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,709
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,866
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,799
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,904
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,005
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,277
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,827
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,933
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,034
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,307
6 in 1 Buckets
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft $3,562
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft $3,837
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,371
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,934
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,546
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,837
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,403
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,001
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,575
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,866
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,433
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,031
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
U.S. DOLLAR PRICE PAGES JCB 250 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 52 of 217 JCB 225 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F307 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F308 $1,331
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $961
881G079 Roadlight Kit with Brake lights for A/C machines $961
881G076 Worklights with 2 rear lights for non A/C machines $44
881G089 Grid Heater for Canopy builds (Starting aid) $139
881G025 Engine Block Heater - 110V $146
881G031 Rotating Beacon and Socket $152
881G043 White Noise Reverse Alarm $204
Loader Options
881G075 Powered Quick Hitch $868
881G077 Smooth Ride System (SRS) $1,086
881G095 Parallel Lift Radial Lift Models - 250, 250T $555
Hydraulic Options
881G021 Biodegradable Oils $329
Operators Compartment Options
881G084 Foot Throttle $220
881G096 ISO & Dual Hand Control Pattern Changeover $166
881G022 Radio with Speakers and Aerial $324
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G011 Key Start/ Key Immobilizer- All machine configurations $435
881G091 Vinyl Air Suspension Seat $666
881G019 Cloth Air Suspension Seat $752
881G105 Vinyl Mechanical Suspension Seat $259
881G020 3 inch Seatbelt $64
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $289
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $192
U.S. DOLLAR
PRICE PAGES JCB 250 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312)
Select Optional Equipment as desired within limitations (if indicated)
All prices and specifications subject to change without notice Page 53 of 217 JCB 225 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED ( - do not need to order if included in operator enclosure packages) INDEX
Operators Compartment Options
881G084 Foot Throttle $220
881G096 ISO & Dual Hand Control Pattern Changeover $166
881G022 Radio with Speakers and Aerial $324
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G011 Key Start/ Key Immobilizer- All machine configurations $435
881G091 Vinyl Air Suspension Seat $666
881G019 Cloth Air Suspension Seat $752
881G105 Vinyl Mechanical Suspension Seat $259
881G020 3 inch Seatbelt $64
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $289
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $192
Other Options
881G073 2 Speed - Wheeled Machines $1,639
881G085 Reversing Fan - Global (Gear Pump) $908
881G092 Spark Arrestor Muffler $260
881G083 Tool Kit - Basic $348
881G098 Tool Kit - Full $516
881G108 Pre-Cleaner for adverse applications $388
881G090 External Engine Hourmeter $146
881G029 Twine Cutter - wheeled machines only $146
Impact Protection/Guards
881G008 Impact Protection - Laminated Glass - for Canopy builds $578
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,829
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $926
881G107 Laminate glass to replace tempered glass as standard on cab builds only - Tier 4 $135
881G116 Front ¾" Lexan with front mesh guard $2,032
881G071 Front Mesh Guard for canopy machines (NO front glass required) $727
881G054 Right Hand Mesh to Replace Glass as Standard $173
881G087 Canopy Wheeled Fender & Fuel Cap Protection $130
881G088 Cab Wheeled Fender & Fuel Cap Protection $130
881G036 Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side door.$724
881G110 Front Work Light Protection - FOPS Required - Not Compatible with Roadlights $285
881G112 Auxiliary Guard $339
881G113 A/C FOPS Guard with Side Protection - FOPS Required $1,297
881G072 A/C FOPS Guard $555
881G109 Cooling Pack Guard $812
881G119 Light Duty Light Guard $135
881G070 Heavy Duty Rear Bars for Adverse Applications $1,085
JCB 250 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 54 of 217 JCB 225 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
APPLICATION PACKAGES INDEX
881G014 $2,170
881G015 $3,617
881G016 $3,257
881G051 $2,464
881G052 $1,076
881G061 $2,058
881G062 $3,501
881G063 $3,136
881G064 $3,009
881G065 $4,514
881G066 $4,162
BUCKET ACCESSORIES
881H301 Bolt on Edge for 66" Bucket (1676mm) $298
881H325 Bolt on Edge for 68" Bucket (1727mm) $308
881H302 Bolt on Edge for 72" Bucket (1727mm) $318
881H316 Bolt on Edge for 75" Bucket (1905mm) $327
881H334 Bolt on Edge for 76" Scrap Grapple $736
881H303 Bolt on Edge for 78" Bucket (1829mm) $336
881H335 Bolt on Edge for 82" Scrap Grapple $807
881H304 Bolt on Edge for 84" Bucket (1981mm) $372
881H328 Bolt on Edge for 96" Snow Bucket (2438mm) $499
881H330 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) $446
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $763
881H326 Tooth Bar for 68" Bucket - Over Bucket (1727mm) $648
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $664
881H317 Tooth Bar for 75" bucket - Over Bucket (1905mm) $675
881H307 Tooth Bar for 78" Bucket - Over Bucket (1829mm) $687
881H308 Tooth Bar for 84" Bucket - Over Bucket (1981mm) $712
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $692
881H327 Tooth Bar for 68" Bucket - Over Bolt on Edge (1727mm) $916
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $926
881H318 Tooth Bar for 75" bucket - Over Bolt on Edge (1905mm) $936
881H311 Tooth Bar for 78" Bucket - Over Bolt on Edge (1829mm) $977
881H312 Tooth Bar for 84" Bucket - Over Bolt on Edge (1981mm) $956
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
JCB 250 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars -
Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide protection
over laminated cab glass.
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Cab machines only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 55 of 217 JCB 225 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,900
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U249 84" Pick-Up Sweeper 334/P2839 $7,403
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,919
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
881U352 HM386Q (includes Chisel & Moil) - *980/68700 Mounting Bracket required* 980/A3483 $12,109
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,861
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
881U401 Planetary Drive Auger - High Flow - (includes mounting bracket & hoses) 332/L3979 $5,645
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
EFFECTIVE: JANUARY 1, 2018 JCB 250 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 56 of 217 JCB 225 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $11,854
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,993
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,245
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $10,013
881U508 66" Auto Rake - Standard Flow 332/L7253 $10,481
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U510 66" Tiller - 6 inch tines - High Flow 332/X4380 $6,309
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,896
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,736
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,684
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $11,015
Forestry Cutters
881U516 60" Forestry Cutting Head - High Flow 334/L8351 $32,580
EFFECTIVE: JANUARY 1, 2018 JCB 250 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 57 of 217 JCB 225 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,083
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
881U522 48" Trencher with 6" wide chain, crumber and hoses - High Flow 332/X4290 $7,625
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
881U524 72" Brush Cutter - High Flow 333/X4409 $7,365
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4301 $23,722
881U610 40" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4302 $27,875
Saws
881U611 Rock Saw - 18" Depth - High Flow 332/L7244 $20,302
Snow Removal Attachments
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U664 78" Snow Blower - Standard Flow 332/X4384 $8,649
881U660 72" Snow Blower - High Flow 332/X4399 $9,809
881U661 78" Snow Blower - High Flow 332/X4400 $10,248
881U670 72" Snow Push 333/X6486 $3,107
881U671 84" Snow Push 333/X6487 $3,400
EFFECTIVE: JANUARY 1, 2018 JCB 250 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
All prices and specifications subject to change without notice Page 58 of 217 JCB 225 Skid Steer USD Price Page Iss 3
Index
2018
JCB SKID STEER LOADER
270NEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner; Fuel
filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 6.8 mph in both
forward and reverse. Standard Creep speed provides operation from 0 - 1/2 of full speed for special
applications. An optional two speed transmission is available providing a low range of 0 - 6.8 mph and a
high range of 0 - 12.4 mph
12 x 16.5 10 ply, Heavy Duty WIDE TRACK JCB Tires providing 72" width.
SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and operator restraint interlock for
drive and loader functions. Cab units are pressurized and available with heat or heat and A/C, sliding left
window and full side door. Right Hand glass standard on canopy and cab builds.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides class
leading access to engine bay and daily maintenance and check points.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear, Reverse
Alarm, Horn, and 12V Accessory Socket.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Rated Operating Capacity of 2600 lbs, Vertical Lift Loader Design provides vertical lift path and increased
reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic powered
attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic Float standard on
all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride system), left hand auxiliary
pipework.
LOADER
Audible and visual warning systems, right and left side mounted instrument panels. Standard electronic
throttle control with optional foot throttle.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc, oil
immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically activated
through a switch on the instrument panel or by raising seat bar.
JCB 270 SKID STEER LOADER
All prices and specifications subject to change without notice Page 61 of 217 JCB 260 Skid Steer USD Price Page Iss 3
JCB 270 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8606A 8606B 8606CSALES CANOPY CAB CAB
CODE ITEM STD FLOW STD FLOW HIGH FLOW
8606 JCB 270 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A302 12 x 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width)
881B309
881B329
881C311 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C312
881D302 GP Bucket - 72" - 15.4 cu-ft
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F306
881G022
881G025 Engine Block Heater - 110V
881G073 2 Speed - Wheeled Machines
881G075 Powered Quick Hitch
881G077 Smooth Ride System (SRS)
881G084 Foot Throttle
881G085 Reversing Fan - Global (Gear Pump)
881G091 Vinyl Air Suspension Seat
881G105 Vinyl Mechanical Suspension Seat
881G094 Parallel Lift Vertical Lift Models - 270
881G096 ISO & Dual Hand Control Pattern Changeover
SUGGESTED LIST PRICE $46,170 $51,334 $55,760
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
Radio with Speakers and Aerial
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 62 of 217 JCB 260 Skid Steer USD Price Page Iss 3
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8606 JCB 270 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $39,808
TIRE SETS (E) pick one
881A301 12 x 16.5 10PR HD Tires and Wheels (provides 67.9" width) $0
881A302 12 x 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width) $58
881A305 12 x 16.5 10PR Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 67.9" width) $880
881A306 12 x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 71.7" width) $926
881A307 33/15.5 x 16.5 14PR SK Hauler High Floatation Tires and Wheels (provides 72" width) $1,100
881A308 8 x 16 Solid Industrial Tires and Wheels (provides 63" width) $1,736
881A309 12 x 16.5 Brawler Solid Flex Industrial Tires and Wheels (provides 66" width) $2,604
881A316 12 x 16.5 Slick Brawler Solid Flex Industrial $2,748
881A317 12 x 16.5 Michelin Bibsteer HD Wide Track Tires and Wheels $1,268
881A318 12 x 16.5 Michelin Bibsteer HD Tires and Wheels $1,207
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B309 $942
Cab with Heater Packages
881B319 $3,050
Cab with Heater and A/C Packages
881B329 $5,020
MACHINE CONTROLS (E)
881C311 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics $1,156
881C312 $1,746
JCB 270 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 63 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D302 GP Bucket - 72" - 15.4 cu-ft $1,221
881D341 GP Bucket - 75" - 15.8 cu-ft $1,399
881D303 GP Bucket - 78" - 16.7 cu-ft $1,603
881D304 GP Bucket - 84" - 18.1 cu-ft $1,679
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,889
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,940
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,990
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,390
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,919
881D345 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,969
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,018
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,419
Landscape Buckets
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,310
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,709
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,866
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,904
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,005
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,277
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,933
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,034
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,307
6 in 1 Buckets
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft $3,837
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,371
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,934
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,837
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,403
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,001
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,866
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,433
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,031
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
U.S. DOLLAR PRICE PAGES JCB 270 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 64 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F306 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312)$1,331
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $961
881G079 Roadlight Kit with Brake lights for A/C machines $961
881G076 Worklights with 2 rear lights for non A/C machines $44
881G089 Grid Heater for Canopy builds (Starting aid) $139
881G025 Engine Block Heater - 110V $146
881G031 Rotating Beacon and Socket $152
881G043 White Noise Reverse Alarm $204
Loader Options
881G075 Powered Quick Hitch $868
881G077 Smooth Ride System (SRS) $1,086
881G094 Parallel Lift Vertical Lift Models - 270 $555
Hydraulic Options
881G021 Biodegradable Oils $329
Operators Compartment Options
881G084 Foot Throttle $220
881G096 ISO & Dual Hand Control Pattern Changeover $166
881G022 Radio with Speakers and Aerial $324
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G011 Key Start/ Key Immobilizer- All machine configurations $435
881G091 Vinyl Air Suspension Seat $666
881G019 Cloth Air Suspension Seat $752
881G105 Vinyl Mechanical Suspension Seat $259
881G020 3 inch Seatbelt $64
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $289
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $192
U.S. DOLLAR
PRICE PAGES JCB 270 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated)
All prices and specifications subject to change without notice Page 65 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED ( - do not need to order if included in operator enclosure packages) INDEX
Operators Compartment Options
881G084 $220
881G096 $166
881G022 $324
881G018 $435
881G011 $435
881G091 $666
881G019 $752
881G105 $259
881G020 $64
881G042 $289
881G050 $192
881G073 $1,639
881G085 $908
881G092 $260
881G083 $348
881G098 $516
881G108 $388
881G090 $146
881G029 $146
881G008 $578
881G009 $1,829
881G106 $926
881G107 $135
881G116 $2,032
881G071 $727
881G054 $173
881G087 $130
881G088 $130
881G036 $724
881G110 $285
881G112 $339
881G113 $1,297
881G072 $555
881G109 $812
881G119 $135
881G070 $1,085
881G014 $2,170
881G015 $3,617
881G016 $3,257
881G051 $2,464
881G052 $1,076
881G061 $2,058
881G062 $3,501
881G063 $3,136
881G064 $3,009
881G065 $4,514
881G066 $4,162
881G070 $1,085
881G072 $555
Cooling Pack Guard
Light Duty Light Guard
Heavy Duty Rear Bars for Adverse Applications
APPLICATION PACKAGES
Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side door.
Front Work Light Protection - FOPS Required - Not Compatible with Roadlights
Auxiliary Guard
A/C FOPS Guard with Side Protection - FOPS Required
A/C FOPS Guard
Front ¾" Lexan with front mesh guard
Front Mesh Guard for canopy machines (NO front glass required)
Right Hand Mesh to Replace Glass as Standard
Canopy Wheeled Fender & Fuel Cap Protection
Cab Wheeled Fender & Fuel Cap Protection
Impact Protection/Guards
Impact Protection - Laminated Glass - for Canopy builds
Impact Protection - Lexan Screen - for Canopy or Cab builds
Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4
Laminate glass to replace tempered glass as standard on cab builds only - Tier 4
Tool Kit - Basic
Tool Kit - Full
Pre-Cleaner for adverse applications
External Engine Hourmeter
Twine Cutter - wheeled machines only
2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option
Other Options
2 Speed - Wheeled Machines
Reversing Fan - Global (Gear Pump)
Spark Arrestor Muffler
A/C FOPS Guard
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty
Rear Bars - Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Heavy Duty Rear Bars for Adverse Applications
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to
provide protection over laminated cab glass.
Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
JCB 250 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty
Rear Bars - Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must
EFFECTIVE: JANUARY 1, 2018
Foot Throttle
ISO & Dual Hand Control Pattern Changeover
Radio with Speakers and Aerial
Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights)
Key Start/ Key Immobilizer- All machine configurations
Vinyl Air Suspension Seat
Cloth Air Suspension Seat
Vinyl Mechanical Suspension Seat
3 inch Seatbelt
3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 66 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
APPLICATION PACKAGES INDEX
881G014 $2,170
881G015 $3,617
881G016 $3,257
881G051 $2,464
881G052 $1,076
881G061 $2,058
881G062 $3,501
881G063 $3,136
881G064 $3,009
881G065 $4,514
881G066 $4,162
881G120 $5,372
BUCKET ACCESSORIES
881H301 Bolt on Edge for 66" Bucket (1676mm) $298
881H325 Bolt on Edge for 68" Bucket (1727mm) $308
881H302 Bolt on Edge for 72" Bucket (1727mm) $318
881H316 Bolt on Edge for 75" Bucket (1905mm) $327
881H334 Bolt on Edge for 76" Scrap Grapple $736
881H303 Bolt on Edge for 78" Bucket (1829mm) $336
881H335 Bolt on Edge for 82" Scrap Grapple $807
881H304 Bolt on Edge for 84" Bucket (1981mm) $372
881H328 Bolt on Edge for 96" Snow Bucket (2438mm) $499
881H330 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) $446
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $763
881H326 Tooth Bar for 68" Bucket - Over Bucket (1727mm) $648
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $664
881H317 Tooth Bar for 75" bucket - Over Bucket (1905mm) $675
881H307 Tooth Bar for 78" Bucket - Over Bucket (1829mm) $687
881H308 Tooth Bar for 84" Bucket - Over Bucket (1981mm) $712
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $692
881H327 Tooth Bar for 68" Bucket - Over Bolt on Edge (1727mm) $916
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $926
881H318 Tooth Bar for 75" bucket - Over Bolt on Edge (1905mm) $936
881H311 Tooth Bar for 78" Bucket - Over Bolt on Edge (1829mm) $977
881H312 Tooth Bar for 84" Bucket - Over Bolt on Edge (1981mm) $956
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
JCB 270 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order
G008
AGRI Package Build - Wheeled (Includes: Radio, Heated Vinyl Suspension Seat, Block Heater, Twine Cutter, 2 Speed,
Quickhitch, Foot Throttle, ISO & Dual Pattern Change Over)
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order
G008Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide protection
over laminated cab glass.
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars
- Cab machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear
Bars - Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars
- Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 67 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $2,239
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,900
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,644
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U249 84" Pick-Up Sweeper 334/P2839 $7,403
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,919
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,379
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
881U352 HM386Q (includes Chisel & Moil) - *980/68700 Mounting Bracket required* 980/A3483 $12,109
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,861
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
881U401 Planetary Drive Auger - High Flow - (includes mounting bracket & hoses) 332/L3979 $5,645
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
EFFECTIVE: JANUARY 1, 2018 JCB 270 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 68 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex $480
881U459 9" X 4' Heavy Duty Auger 2" Hex $647
881U460 12" X 4' Heavy Duty Auger 2" Hex $735
881U461 15" X 4' Heavy Duty Auger 2" Hex $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" $171
881U471 Hex. Drive Extension - 18" $252
881U472 Hex. Drive Extension - 24" $334
Landscape Development Tools
881U473 60" Landscape Power Rake with Manual Angle $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle $11,788
881U500 72" Landscape Power Rake with Manual Angle $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle $11,854
881U502 84" Landscape Power Rake with Manual Angle $13,993
881U503 84" Landscape Power Rake with Hydraulic Angle $14,245
881U506 66' Landscape Preparator - Standard Flow $10,013
881U507 76" Landscape Preparator - Standard Flow $13,383
881U508 66" Auto Rake - Standard Flow $10,481
881U509 76" Auto Rake - Standard Flow $10,633
881U526 52" Tiller - 6 inch tines - Standard Flow $6,088
881U510 66" Tiller - 6 inch tines - High Flow $6,309
881U511 78" Tiller - 6 inch tines - High Flow $6,624
881U527 66" Vibratory Roller - Smooth Drum $9,896
881U528 66" Vibratory Roller - Padded Drum $10,736
881U512 73" Vibratory Roller - Smooth Drum $10,684
881U514 73" Vibratory Roller - Padded Drum $11,015
Forestry Cutters
881U516 60" Forestry Cutting Head - High Flow $32,580
980/A3001
980/A2031
980/A2034
JCB 270 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
EFFECTIVE: JANUARY 1, 2018
980/A2032
980/A2035
980/A2037
980/A2038
980/A2039
332/L7253
332/L3960
333/L8191
332/L3947
332/L7237
332/L3951
332/L7252
332/L3954
332/L3939
980/L7251
980/L7257
980/L7267
980/L7273
980/L7270
980/L7271
980/L7272
333/L6180
333/L6126
332/X4381
332/X4380
334/L8351
332/X4283
332/X4710
332/X4281
332/X4709
All prices and specifications subject to change without notice Page 69 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH, GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U530 333/L6079 $2,466
881U531 333/L6106 $3,727
881U550 332/L3869 $4,083
881U551 332/L3879 $4,522
881U552 332/X4338 $6,162
881U532 333/L5627 $835
881U529 333/L8251 $4,986
881U520 332/L7251 $5,242
881U521 332/X4289 $5,755
881U522 332/X4290 $7,625
881U523 333/X5231 $7,219
881U524 333/X4409 $7,365
881U600 332/X4294 $8,496
881U601 332/X4295 $9,685
881U605 332/X4382 $13,905
881U606 332/X4299 $21,389
881U607 332/X4300 $21,682
881U608 332/L7272 $21,788
881U609 332/X4301 $23,722
881U610 332/X4302 $27,875
881U611 332/L7244 $20,302
881U533 333/L8499 $2,101
881U534 333/L8498 $2,595
881U650 332/X4347 $2,116
881U653 332/X4350 $2,646
881U651 332/X4348 $2,132
881U654 332/X4351 $2,696
881U652 332/X4349 $2,157
881U655 332/X4352 $2,747
881U535 333/L6154 $8,597
881U663 332/X4383 $8,624
881U660 332/X4399 $9,809
881U664 332/X4384 $8,649
881U661 332/X4400 $10,248
881U665 332/X4385 $8,674
881U662 332/X4401 $13,861
881U670 333/X6486 $3,107
881U671 333/X6487 $3,400
72" Snow Push
84" Snow Push
72" Snow Blower - Standard Flow
72" Snow Blower - High Flow
78" Snow Blower - Standard Flow
78" Snow Blower - High Flow
84" Snow Blower - Standard Flow
84" Snow Blade - Hydraulic Angle
96" Snow Blade - Manual Angle
96" Snow Blade - Hydraulic Angle
60" Snow Blower - Standard Flow
84" Snow Blower - High Flow
60" Snow Blade - Manual Angle
60" Snow Blade - Hydraulic Angle
72" Snow Blade - Manual Angle
72" Snow Blade - Hydraulic Angle
84" Snow Blade - Manual Angle
30" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow
40" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow
Saws
Rock Saw - 18" Depth - High Flow
Snow Removal Attachments
Cold Planers
12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow
16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow
18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow
24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow
72" Brush Cutter - Standard Flow
72" Brush Cutter - High Flow
Stump Grinders
Stump Grinder - 26" Wheel Diameter / Standard Flow
Stump Grinder - 30" Wheel Diameter / High Flow
30" Trencher with 6" wide chain, crumber and hoses - Standard Flow
36" Trencher with 6" wide chain, crumber and hoses - Standard Flow
48" Trencher with 6" wide chain, crumber and hoses - Standard Flow
48" Trencher with 6" wide chain, crumber and hoses - High Flow
Brush Cutters
72" Manure Forks with Top Grapple
84" Manure Forks with Top Grapple
96" Silage Defacer - Standard Flow
Bale Spear
Trenchers
EFFECTIVE: JANUARY 1, 2018 JCB 270 SKID STEER LOADER
60" Manure Forks with Top Grapple
66" Manure Forks with Top Grapple
U.S. DOLLAR PRICE
PAGES
All prices and specifications subject to change without notice Page 70 of 217 JCB 260 Skid Steer USD Price Page Iss 3
Index
2018
JCB SKID STEER LOADER
300NEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
U.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018 JCB 300 SKID STEER LOADER
LOADER Rated Operating Capacity of 3000 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of
hydraulic powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch.
Hydraulic Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS
(smooth ride system), left hand auxiliary pipework.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner;
Fuel filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.
SAE certified ROPS/FOPS, left side entry. Vinyls seat with seatbelt and operator
restraint interlock for drive and loader functions. Cab units are pressurized and
available with heat or heat and A/C, sliding left window and full side door. Right
Hand glass standard on canopy and cab builds.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple
disc, oil immersed, spring applied hydraulic release that provides a fail safe with the engine off.
Electrically activated through a switch on the instrument panel or by raising seat bar.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 6.8 mph in
both forward and reverse. Standard Creep speed provides operation from 0 to 1/2 of full speed
for special applications. An optional two (2) speed transmission is available providing a low range
of 0 - 6.8 mph and a high range of 0 - 12.4 mph
Cab tilts forward to provide further access to the hydraulic components. Rear
door provides class leading access to engine bay and daily maintenance and
check points.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
12 x 16.5 10 ply, Heavy Duty WIDE TRACK JCB Tires providing 72" width.
Audible and visual warning systems, right and left side mounted instrument
panels. Standard electronic throttle control with optional foot throttle.
All prices and specifications subject to change without notice Page 73 of 217 JCB 300 Skid Steer USD Price Page Iss 3
EFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8608A 8608B 8608CSALES CANOPY CAB CAB
CODE ITEM STD FLOW STD FLOW HIGH FLOW
8608 JCB 300 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A302 12 x 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width)
881B309
881B329
881C311 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C312
881D302 GP Bucket - 72" - 15.4 cu-ft
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F310
881G022 Radio with Speakers and Aerial
881G025 Engine Block Heater - 110V
881G073 2 Speed - Wheeled Machines
881G075 Powered Quick Hitch
881G077 Smooth Ride System (SRS)
881G082 Reversing Fan
881G084 Foot Throttle
881G091 Vinyl Air Suspension Seat
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T
881G096 ISO & Dual Hand Control Pattern Changeover
881G105 Vinyl Mechanical Suspension Seat
SUGGESTED LIST PRICE $53,052 $57,130 $62,642
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB 300 SKID STEER LOADER U.S. DOLLAR PRICE PAGESF.O.B.
SAVANNAH, GA
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not
meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 74 of 217 JCB 300 Skid Steer USD Price Page Iss 3
U.S. DOLLAR PRICE
PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8608 JCB 300 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $46,690
TIRE SETS (E) pick one
881A301 12 x 16.5 10PR HD Tires and Wheels (provides 67.9" width) $0
881A302 12 x 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width) $58
881A305 12 x 16.5 10PR Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 67.9" width) $880
881A306 12 x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 71.7" width) $926
881A307 33/15.5 x 16.5 14PR SK Hauler High Floatation Tires and Wheels (provides 72" width) $1,100
881A308 8 x 16 Solid Industrial Tires and Wheels (provides 63" width) $1,736
881A309 12 x 16.5 Brawler Solid Flex Industrial Tires and Wheels (provides 66" width) $2,604
881A316 12 x 16.5 Slick Brawler Solid Flex Industrial $2,748
881A317 12 x 16.5 Michelin Bibsteer HD Wide Track Tires and Wheels $1,268
881A318 12 x 16.5 Michelin Bibsteer HD Tires and Wheels $1,207
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B309 $942
Cab with Heater Packages
881B319 $3,050
Cab with Heater and A/C Packages
881B329 $5,020
MACHINE CONTROLS (E)
881C311 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics $1,156
881C312 $1,746
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB 300 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 75 of 217 JCB 300 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D302 GP Bucket - 72" - 15.4 cu-ft $1,221
881D341 GP Bucket - 75" - 15.8 cu-ft $1,399
881D303 GP Bucket - 78" - 16.7 cu-ft $1,603
881D304 GP Bucket - 84" - 18.1 cu-ft $1,679
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,889
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,940
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,990
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,390
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,919
881D345 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,969
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,018
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,419
Landscape Buckets
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,310
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,709
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,866
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,904
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,005
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,277
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,933
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,034
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,307
6 in 1 Buckets
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft $3,837
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,371
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,934
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,837
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,403
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,001
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,866
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,433
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,031
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
U.S. DOLLAR PRICE PAGES JCB 300 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
All prices and specifications subject to change without notice Page 76 of 217 JCB 300 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F310 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312) $1,331
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $961
881G079 Roadlight Kit with Brake lights for A/C machines $961
881G076 Worklights with 2 rear lights for non A/C machines $44
881G089 Grid Heater for Canopy builds (Starting aid) $139
881G025 Engine Block Heater - 110V $146
881G031 Rotating Beacon and Socket $152
881G043 White Noise Reverse Alarm $204
Loader Options
881G075 Powered Quick Hitch $868
881G077 Smooth Ride System (SRS) $1,086
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T $555
Hydraulic Options
881G021 Biodegradable Oils $329
Operators Compartment Options
881G084 Foot Throttle $220
881G096 ISO & Dual Hand Control Pattern Changeover $166
881G022 Radio with Speakers and Aerial $324
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G011 Key Start/ Key Immobilizer- All machine configurations $435
881G091 Vinyl Air Suspension Seat $666
881G019 Cloth Air Suspension Seat $752
881G105 Vinyl Mechanical Suspension Seat $259
881G020 3 inch Seatbelt $64
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $289
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $192
JCB 300 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018U.S. DOLLAR PRICE PAGES
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 77 of 217 JCB 300 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G073 2 Speed - Wheeled Machines $1,639
881G082 Reversing Fan $908
881G092 Spark Arrestor Muffler $260
881G083 Tool Kit - Basic $348
881G098 Tool Kit - Full $516
881G108 Pre-Cleaner for adverse applications $388
881G090 External Engine Hourmeter $146
881G029 Twine Cutter - wheeled machines only $146
Impact Protection/Guards
881G008 Impact Protection - Laminated Glass - for Canopy builds $578
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,829
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $926
881G107 Laminate glass to replace tempered glass as standard on cab builds only - Tier 4 $135
881G116 Front ¾" Lexan with front mesh guard $2,032
881G071 Front Mesh Guard for canopy machines (NO front glass required) $727
881G054 Right Hand Mesh to Replace Glass as Standard $173
881G087 Canopy Wheeled Fender & Fuel Cap Protection $130
881G088 Cab Wheeled Fender & Fuel Cap Protection $130
881G036 Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side door.$724
881G110 Front Work Light Protection - FOPS Required - Not Compatible with Roadlights $285
881G112 Auxiliary Guard $339
881G113 A/C FOPS Guard with Side Protection - FOPS Required $1,297
881G072 A/C FOPS Guard $555
881G109 Cooling Pack Guard $812
881G119 Light Duty Light Guard $135
881G070 Heavy Duty Rear Bars for Adverse Applications $1,085
APPLICATION PACKAGES
881G014 $2,170
881G015 $3,617
881G016 $3,257
881G051 $2,464
881G052 $1,076
881G061 $2,058
881G062 $3,501
881G063 $3,136
881G064 $3,009
881G065 $4,514
881G066 $4,162
881G070 $1,085
881G072 $555
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must
order G008
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear
Bars - Cab machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to
provide protection over laminated cab glass.
Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
JCB 300 SKID STEER LOADER
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty
Rear Bars - Canopy machines must order G008
EFFECTIVE: JANUARY 1, 2018
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must
order G008
U.S. DOLLAR
PRICE PAGES
A/C FOPS Guard
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear
Bars - Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Heavy Duty Rear Bars for Adverse Applications
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 78 of 217 JCB 300 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
APPLICATION PACKAGES INDEX
881G014 $2,170
881G015 $3,617
881G016 Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008$3,257
881G051 $2,464
881G052 $1,076
881G061 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only $2,058
881G062 $3,501
881G063 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only $3,136
881G064 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only $3,009
881G065 $4,514
881G066 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only $4,162
BUCKET ACCESSORIES
881H302 Bolt on Edge for 72" Bucket (1727mm) $318
881H316 Bolt on Edge for 75" Bucket (1905mm) $327
881H334 Bolt on Edge for 76" Scrap Grapple $736
881H303 Bolt on Edge for 78" Bucket (1829mm) $336
881H335 Bolt on Edge for 82" Scrap Grapple $807
881H304 Bolt on Edge for 84" Bucket (1981mm) $372
881H328 Bolt on Edge for 96" Snow Bucket (2438mm) $499
881H329 Bolt on Edge for 108" Snow Bucket (2743mm) $519
881H330 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) $446
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $664
881H317 Tooth Bar for 75" bucket - Over Bucket (1905mm) $675
881H307 Tooth Bar for 78" Bucket - Over Bucket (1829mm) $687
881H308 Tooth Bar for 84" Bucket - Over Bucket (1981mm) $712
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $926
881H318 Tooth Bar for 75" bucket - Over Bolt on Edge (1905mm) $936
881H311 Tooth Bar for 78" Bucket - Over Bolt on Edge (1829mm) $977
881H312 Tooth Bar for 84" Bucket - Over Bolt on Edge (1981mm) $956
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to
provide protection over laminated cab glass.
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear
Bars - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear
Bars - Cab machines only
JCB 300 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must
order G008Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear
Bars - Canopy machines must order G008
U.S. DOLLAR PRICE PAGES
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 79 of 217 JCB 300 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $2,239
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $2,289
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,340
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,900
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $3,004
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $3,027
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,644
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,965
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $5,596
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U249 84" Pick-Up Sweeper 334/P2839 $7,403
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,919
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,379
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
881U352 HM386Q (includes Chisel & Moil) - *980/68700 Mounting Bracket required* 980/A3483 $12,109
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,861
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
881U401 Planetary Drive Auger - High Flow - (includes mounting bracket & hoses) 332/L3979 $5,645
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
EFFECTIVE: JANUARY 1, 2018 JCB 300 SKID STEER LOADER
PART NUMBER
U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 80 of 217 JCB 300 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $11,854
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,993
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,245
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $14,093
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,541
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $10,013
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,383
881U508 66" Auto Rake - Standard Flow 332/L7253 $10,481
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,633
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U510 66" Tiller - 6 inch tines - High Flow 332/X4380 $6,309
881U511 78" Tiller - 6 inch tines - High Flow 332/X4381 $6,624
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,896
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,684
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,790
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,736
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $11,015
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,575
Forestry Cutters
881U516 60" Forestry Cutting Head - High Flow 334/L8351 $32,580
EFFECTIVE: JANUARY 1, 2018 JCB 300 SKID STEER LOADER
PART NUMBER
U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 81 of 217 JCB 300 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,769
881U519 96" Dozer Blade - 6 Way Hydraulic 332/X4287 $7,771
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,083
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,522
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,162
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
881U522 48" Trencher with 6" wide chain, crumber and hoses - High Flow 332/X4290 $7,625
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
881U524 72" Brush Cutter - High Flow 333/X4409 $7,365
881U525 78' Brush Cutter - High Flow 333/X4383 $7,701
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4301 $23,722
881U610 40" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4302 $27,875
EFFECTIVE: JANUARY 1, 2018 JCB 300 SKID STEER LOADER
PART NUMBER
U.S. DOLLAR
PRICE PAGES
All prices and specifications subject to change without notice Page 82 of 217 JCB 300 Skid Steer USD Price Page Iss 3
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Saws
881U611 Rock Saw - 18" Depth - High Flow 332/L7244 $20,302
881U612 Rock Saw - 24" Depth - High Flow 332/L7269 $22,524
Snow Removal Attachments
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U651 84" Snow Blade - Manual Angle 332/X4348 $2,132
881U652 96" Snow Blade - Manual Angle 332/X4349 $2,157
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U654 84" Snow Blade - Hydraulic Angle 332/X4351 $2,696
881U655 96" Snow Blade - Hydraulic Angle 332/X4352 $2,747
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $4,630
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,681
881U658 120" Heavy Duty Snow Blade - Hydraulic Angle 332/L3932 $4,775
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U664 78" Snow Blower - Standard Flow 332/X4384 $8,649
881U665 84" Snow Blower - Standard Flow 332/X4385 $8,674
881U660 72" Snow Blower - High Flow 332/X4399 $9,809
881U661 78" Snow Blower - High Flow 332/X4400 $10,248
881U662 84" Snow Blower - High Flow 332/X4401 $13,861
881U670 72" Snow Push 333/X6486 $3,107
881U671 84" Snow Push 333/X6487 $3,400
881U672 96" Snow Push 333/X6488 $3,610
JCB 300 SKID STEER LOADER
PART NUMBER
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
EFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 83 of 217 JCB 300 Skid Steer USD Price Page Iss 3
Index
2018
JCB SKID STEER LOADER
330NEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
SERVICEABILITY
JCB 330 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
LOADER Rated Operating Capacity of 3300 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride
system), left hand auxiliary pipework.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 13.5 mph in both
forward and reverse are obtained with standard two (2) speed transmission with a low range of 0 - 7.3
mph and a high range of 0 - 13.5 mph. Standard Creep Speed provides operation from 0 - 1/2 of full
speed for special applications.
SAE certified ROPS/FOPS, left side entry. Vinyl mechanical suspension seat with
seatbelt and operator restraint interlock for drive and loader functions. Cab units
are pressurized and available with heat or heat and A/C, sliding left window and full
side door. Right Hand glass standard on canopy and cab builds.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage
air cleaner; Fuel filter with water separator; 1000 CCA battery; variable speed
hydraulically driven fan.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
14 x 17.5 12 ply, Heavy Duty WIDE TRACK JCB Tires providing 73" width.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Cab tilts forward to provide further access to the hydraulic components. Rear door
provides class leading access to engine bay and daily maintenance and check points.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear, Reverse
Alarm, Horn, and 12V Accessory Socket.
All prices and specifications subject to change without notice Page 86 of 217 JCB 330 Skid Steer USD Price Page Iss 3
JCB 330 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8609A 8609B 8609CSALES CANOPY CAB CAB
CODE ITEM STD FLOWHIGH FLOWHIGH FLOW
8609 JCB 330 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A311 14 x 17.5 12 PR Heavy Duty Pneumatic Tires (provides 73.4" width)
881B309
881B329
881C311 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C312
881D341 GP Bucket - 75" - 15.8 cu-ft
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F310
881G082 Reversing Fan
881G025 Engine Block Heater - 110V
881G075 Powered Quick Hitch
881G076 Worklights with 2 rear lights for non A/C machines
881G077 Smooth Ride System (SRS)
881G084 Foot Throttle
881G091 Vinyl Air Suspension Seat
881G105 Vinyl Mechanical Suspension Seat
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T
881G096 ISO & Dual Hand Control Pattern Changeover
SUGGESTED LIST PRICE $56,440 ###### $65,662
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick
option 881C312)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not
meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 87 of 217 JCB 330 Skid Steer USD Price Page Iss 3
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8609 JCB 330 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $50,800
TIRE SETS (E) pick one
881A311 14 x 17.5 12 PR Heavy Duty Pneumatic Tires (provides 73.4" width) $752
881A312 14 x 17.5 12 Brawler Solid Flex Industrial Tire and Wheels (provides 73.4" width) $3,299
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B309 $942
Cab with Heater Packages
881B319 $3,050
Cab with Heater and A/C Packages
881B329 $5,020
MACHINE CONTROLS (E)
881C311 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics $1,156
881C312 $1,746
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
JCB 330 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
All prices and specifications subject to change without notice Page 88 of 217 JCB 330 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D341 GP Bucket - 75" - 15.8 cu-ft $1,399
881D303 GP Bucket - 78" - 16.7 cu-ft $1,603
881D304 GP Bucket - 84" - 18.1 cu-ft $1,679
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,940
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,990
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,390
881D345 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,969
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,018
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,419
Landscape Buckets
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,709
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,866
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,005
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,277
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,034
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,307
6 IN 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,371
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,934
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,403
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,001
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,433
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,031
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
U.S. DOLLAR PRICE PAGES JCB 330 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
All prices and specifications subject to change without notice Page 89 of 217 JCB 330 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F310 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312) $1,331
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $961
881G079 Roadlight Kit with Brake lights for A/C machines $961
881G076 Worklights with 2 rear lights for non A/C machines $44
881G089 Grid Heater for Canopy builds (Starting aid) $139
881G025 Engine Block Heater - 110V $146
881G031 Rotating Beacon and Socket $152
881G043 White Noise Reverse Alarm $204
Loader Options
881G075 Powered Quick Hitch $868
881G077 Smooth Ride System (SRS) $1,086
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T $555
Hydraulic Options
881G021 Biodegradable Oils $329
Operators Compartment Options
881G084 Foot Throttle $220
881G096 ISO & Dual Hand Control Pattern Changeover $166
881G022 Radio with Speakers and Aerial $324
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G011 Key Start/ Key Immobilizer- All machine configurations $435
881G091 Vinyl Air Suspension Seat $666
881G019 Cloth Air Suspension Seat $752
881G105 Vinyl Mechanical Suspension Seat $259
881G020 3 inch Seatbelt $64
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $289
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $192
U.S. DOLLAR
PRICE PAGES JCB 330 SKID STEER LOADER EFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 90 of 217 JCB 330 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G073 2 Speed - Wheeled Machines $1,639
881G082 Reversing Fan $908
881G092 Spark Arrestor Muffler $260
881G083 Tool Kit - Basic $348
881G098 Tool Kit - Full $516
881G108 Pre-Cleaner for adverse applications $388
881G090 External Engine Hourmeter $146
881G029 Twine Cutter - wheeled machines only $146
Impact Protection/Guards
881G008 Impact Protection - Laminated Glass - for Canopy builds $578
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,829
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $926
881G107 Laminate glass to replace tempered glass as standard on cab builds only - Tier 4 $135
881G116 Front ¾" Lexan with front mesh guard $2,032
881G071 Front Mesh Guard for canopy machines (NO front glass required) $727
881G054 Right Hand Mesh to Replace Glass as Standard $173
881G087 Canopy Wheeled Fender & Fuel Cap Protection $130
881G088 Cab Wheeled Fender & Fuel Cap Protection $130
881G036 Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side door.$724
881G110 Front Work Light Protection - FOPS Required - Not Compatible with Roadlights $285
881G112 Auxiliary Guard $339
881G113 A/C FOPS Guard with Side Protection - FOPS Required $1,297
881G072 A/C FOPS Guard $555
881G109 Cooling Pack Guard $812
881G119 Light Duty Light Guard $135
881G070 Heavy Duty Rear Bars for Adverse Applications $1,085
APPLICATION PACKAGES
881G014 $2,170
881G015 $3,617
881G016 $3,257
881G051 $2,464
881G052 $1,076
881G061 $2,058
881G062 $3,501
881G063 $3,136
881G064 $3,009
881G065 $4,514
881G066 $4,162Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
JCB 330 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Canopy machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars -
Canopy machines must order G008
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -
Cab machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass.
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 91 of 217 JCB 330 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
APPLICATION PACKAGES INDEX
881G014 $2,170
881G015 $3,617
881G016 $3,257
881G051 $2,464
881G052 $1,076
881G061 $2,058
881G062 $3,501
881G063 $3,136
881G064 $3,009
881G065 $4,514
881G066 $4,162
BUCKET ACCESSORIES
881H316 Bolt on Edge for 75" Bucket (1905mm) $327
881H334 Bolt on Edge for 76" Scrap Grapple $736
881H303 Bolt on Edge for 78" Bucket (1829mm) $336
881H335 Bolt on Edge for 82" Scrap Grapple $807
881H304 Bolt on Edge for 84" Bucket (1981mm) $372
881H328 Bolt on Edge for 96" Snow Bucket (2438mm) $499
881H329 Bolt on Edge for 108" Snow Bucket (2743mm) $519
881H330 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) $446
881H317 Tooth Bar for 75" bucket - Over Bucket (1905mm) $675
881H307 Tooth Bar for 78" Bucket - Over Bucket (1829mm) $687
881H308 Tooth Bar for 84" Bucket - Over Bucket (1981mm) $712
881H318 Tooth Bar for 75" bucket - Over Bolt on Edge (1905mm) $936
881H311 Tooth Bar for 78" Bucket - Over Bolt on Edge (1829mm) $977
881H312 Tooth Bar for 84" Bucket - Over Bolt on Edge (1981mm) $956
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines
only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass.
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008
Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines
must order G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass.
JCB 330 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 92 of 217 JCB 330 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $2,239
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $2,289
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,340
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,900
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $3,004
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $3,027
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,644
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,965
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $5,596
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U249 84" Pick-Up Sweeper 334/P2839 $7,403
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,919
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,379
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
881U352 HM386Q (includes Chisel & Moil) - *980/68700 Mounting Bracket required* 980/A3483 $12,109
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,861
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
881U401 Planetary Drive Auger - High Flow - (includes mounting bracket & hoses) 332/L3979 $5,645
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
EFFECTIVE: JANUARY 1, 2018 JCB 330 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
All prices and specifications subject to change without notice Page 93 of 217 JCB 330 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $11,854
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,993
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,245
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $14,093
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,541
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $10,013
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,383
881U508 66" Auto Rake - Standard Flow 332/L7253 $10,481
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,633
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U510 66" Tiller - 6 inch tines - High Flow 332/X4380 $6,309
881U511 78" Tiller - 6 inch tines - High Flow 332/X4381 $6,624
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,896
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,684
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,790
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,736
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $11,015
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,575
EFFECTIVE: JANUARY 1, 2018 JCB 330 SKID STEER LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
All prices and specifications subject to change without notice Page 94 of 217 JCB 330 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Forestry Cutters
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
Dozer Blades
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,083
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,522
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,162
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
881U522 48" Trencher with 6" wide chain, crumber and hoses - High Flow 332/X4290 $7,625
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
881U524 72" Brush Cutter - High Flow 333/X4409 $7,365
881U525 78' Brush Cutter - High Flow 333/X4383 $7,701
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4301 $23,722
881U610 40" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4302 $27,875
EFFECTIVE: JANUARY 1, 2018 JCB 330 SKID STEER LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
All prices and specifications subject to change without notice Page 95 of 217 JCB 330 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Saws
881U611 Rock Saw - 18" Depth - High Flow 332/L7244 $20,302
881U612 Rock Saw - 24" Depth - High Flow 332/L7269 $22,524
Snow Removal Attachments
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U651 84" Snow Blade - Manual Angle 332/X4348 $2,132
881U652 96" Snow Blade - Manual Angle 332/X4349 $2,157
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U654 84" Snow Blade - Hydraulic Angle 332/X4351 $2,696
881U655 96" Snow Blade - Hydraulic Angle 332/X4352 $2,747
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $4,630
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,681
881U658 120" Heavy Duty Snow Blade - Hydraulic Angle 332/L3932 $4,775
881U664 78" Snow Blower - Standard Flow 333/L6154 $8,649
881U665 84" Snow Blower - Standard Flow 332/X4383 $8,674
881U660 72" Snow Blower - High Flow 332/X4384 $9,809
881U661 78" Snow Blower - High Flow 332/X4385 $10,248
881U662 84" Snow Blower - High Flow 332/X4399 $13,861
881U670 72" Snow Push 332/X4400 $3,107
881U671 84" Snow Push 332/X4401 $3,400
881U672 96" Snow Push 333/X6486 $3,610
JCB 330 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
PART NUMBER
All prices and specifications subject to change without notice Page 96 of 217 JCB 330 Skid Steer USD Price Page Iss 3
Index
2018
JCB COMPACT TRACK LOADER
150TNEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
Engine
Transmission
Rubber Tracks:
Brakes
Electrical
Instruments
Cab or Canopy
Hydraulics
Loader
Serviceability
Machine braking provided through the hydrostatic transmission. Parking brake
consists of multiple disc, oil immersed, spring applied hydraulic release that
provides a fail safe with engine off. Electrically activated through a switch on the
instrument panel or by raising seat bar.
18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.
Fitted with 12.6" (320mm) wide tracks provide a machine with of 66" and a
ground bearing pressure of 6.75 psi.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of
0 to 5.6 mph in both forward and reverse. Standard Creep Speed provides
operation from 0 to 50% of full speed for special applications. An optional two
(2) speed transmission is available providing a low range of 0 - 5.6 mph and a high
EFFECTIVE: JANUARY 1, 2018 JCB 150T COMPACT TRACK LOADER
Cab tilts forward to provide further access to the hydraulic components. Rear
door provides class leading access to engine bay and daily maintenacne and check
points.
1.9L (113.5CID) 56 SAE Gross hp, Kohler KDI 1903 TCR engine, centrifugal dry
type dual stage air cleaner. Fuel filter with water separator; 1000 CCA battery;
variable speed hydraulically driven fan.
Meets IP69 water ingress standard. Worklights, 2 Front and 1 Rear, Reverse
Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument
panels. Standard electronic throttle control with optional foot throttle.
SAE certified ROPS/FOPS, left side entry. Mechancial vinyl suspension seat with
retractable seatbelt and operator restraint interlock for drive and loader
functions. Cab units are pressurized and available with heat or heat and A/C,
sliding left window, and full side door. Right Hand glass as standard on canopy
and cab builds.
Rated Operating Capacity of 1500 lbs, Radial Lift Loader Design provides for
maximum loader lift breakout force for superior digging performance. Auxiliary
circuit is standard for operation of hydraulic powered attachments. Choice of
Standard Mechanical or Optional Powered Quick Hitch. Hydraulic float standard
on all models. Loader options include: Parallel Lift in raise only and SRS (smooth
ride system).
All prices and specifications subject to change without notice Page 99 of 217 JCB 150T Skid Steer USD Price Page Iss 2
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8610A 8610BSALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8610 JCB 150T Tier 4 Tracked, Radial Lift, New Generation, Compact Tracked Loader
881A221 12.6" (320 mm) Wide Rubber Track Set - 3 Roller (provides 66" width)
881B234
881B254
881C202 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F208
881G201 Foot Throttle
881G222 Radio with Speakers, Aerial and MP3 cable
881G254 Worklights with 2 rear lights for non A/C machines
881G281 2 Speed - Tracked
881G282 Powered Quick Hitch
881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift)
881G287 Reversing Fan
881G295 ISO & Dual Hand Control Pattern
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155, 210, 150T, 210T)
881G312 Parallel Lift (Raise Only) - Radial Lift - High Flow (155, 210, 150T, 210T)
881G305 Block Heater - 110V Kohler Engine
SUGGESTED LIST PRICE $49,920 $57,688
EFFECTIVE: JANUARY 1, 2018
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch - 3 CYL
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick
Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch -
3 CYL
JCB 150T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGESF.O.B.
SAVANNAH, GA
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 100 of 217 JCB 150T Skid Steer USD Price Page Iss 2
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8610 JCB 150T Tier 4 Tracked, Radial Lift, New Generation, Compact Tracked Loader $43,159
TRACKS (E)
881A221 12.6" (320 mm) Wide Rubber Track Set - 3 Roller (provides 66" width) $0
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B234 $739
Cab with Heater Packages
881B244 $2,767
Cab with Heater and A/C Packages
881B254 $4,660
MACHINE CONTROLS (E)
881C202 $1,147
881C205 $1,748
U.S. DOLLAR PRICE
PAGES JCB 150T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with High
Flow Hydraulics
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch - 3 CYL
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 3 CYL
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 3 CYL
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 101 of 217 JCB 150T Skid Steer USD Price Page Iss 2
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D340 GP Bucket - 68" - 14.3 cu-ft $1,262
881D302 GP Bucket - 72" - 15.4 cu-ft $1,221
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,834
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,889
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,862
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,919
Landscape Buckets
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,310
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,904
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,933
6 in 1 Buckets
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft $3,837
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,837
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,866
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
U.S. DOLLAR PRICE PAGES JCB 150T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 102 of 217 JCB 150T Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F208 $1,136
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G315 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $953
881G316 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $953
881G254 Worklights with 2 rear lights for non A/C machines $145
881G305 Block Heater - 110V Kohler Engine $145
881G231 Rotating Beacon and Socket $151
881G304 White Noise Reverse Alarm $204
Loader Options
881G282 Powered Quick Hitch $846
881G285 SRS, Smooth Ride System - Radial $1,085
881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift) $1,085
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155, 210, 150T, 210T) $533
881G312 Parallel Lift (Raise Only) - Radial Lift - High Flow (155, 210, 150T, 210T) $533
Hydraulic Options
881G314 Biodegradable Oils $327
Operators Compartment Options
881G201 Foot Throttle $211
881G295 ISO & Dual Hand Control Pattern $166
881G211 Key Start/ Key Immobilizer - All machine configurations $435
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $666
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $752
881G220 3 inch wide Seatbelt $63
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $289
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $193
881G222 Radio with Speakers, Aerial and MP3 cable $323
881G310 Additional Soundproofing (for special applications) $473
U.S. DOLLAR
PRICE PAGES JCB 150T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 103 of 217 JCB 150T Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G281 2 Speed - Tracked $1,623
881G287 Reversing Fan $908
881G288 Tool Kit, Basic $348
881G289 Tool Kit, Full $516
881G287 Reversing Fan $908
881G293 Cab Tracked Fender & Fuel Cap Protection $130
881G292 Canopy Tracked Fender & Fuel Cap Protection $130
881G294 External Anolog Engine Hourmeter $146
881G308 Pre-Cleaner T4 $502
881G296 Spark Arrestor Muffler - 3 CYL $249
Impact Protection and Guards
881G208 Laminate Glass to replace tempered as standard on cab builds $134
881G302 Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the full left side door$614
881G209 Front Mesh Guard for Canopy Machines (No front glass required) $727
881G303 Right Hand Mesh to Replace Glass as Standard $203
881G237 Heavy Duty Rear Bars - Protective Bars for Adverse Applications (as a stand alone option) $1,196
881G300 Canopy Tracked Fender & Fuel Cap Protection $130
881G258 Cab Tracked Fender & Fuel Cap Protection $130
881G267 A/C FOPS Guard $556
APPLICATION PACKAGES
881G214 $2,170
881G216 $3,256
881G251 $2,465
881G252 $1,076
881G261 $2,058
881G263 $3,136
881G264 $3,009
881G266 $4,162
881G323 $5,047
BUCKET ACCESSORIES
881H325 Bolt on Edge for 68" Bucket (1727mm) $308
881H302 Bolt on Edge for 72" Bucket (1727mm) $318
881H326 Tooth Bar for 68" Bucket - Over Bucket (1727mm) $648
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $664
881H327 Tooth Bar for 68" Bucket - Over Bolt on Edge (1727mm) $916
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $926
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
AGRI Package Build - Tracked (Includes: Radio, Heated Vinyl Suspension Seat, Block Heater 2 Speed,
Quickhitch, SRS, Foot Throttle, Parallel Lift, ISO & Dual Pattern Change Over)
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines
Only
JCB 150T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy
Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy
machines must order G208Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy
machines must order G208Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel
Mesh to provide protection over laminated cab glass (Not for Canopy Builds)Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines
OnlyWaste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy
Machines Only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 104 of 217 JCB 150T Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F208
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U664 78" Snow Blower - Standard Flow 332/X4384 $8,649
881U659 72" Snow Blower - High Flow Small Platform Only 334/L2463 $9,809
881U667 78" Snow Blower - High Flow Small Platform Only 334/L2491 $10,724
881U670 72" Snow Push 333/X6486 $3,107
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
EFFECTIVE: JANUARY 1, 2018 JCB 150T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 105 of 217 JCB 150T Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F208
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $11,854
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,896
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,736
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,684
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $11,015
EFFECTIVE: JANUARY 1, 2018 JCB 150T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 106 of 217 JCB 150T Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F208
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,083
881U532 Bale Spear 333/L5627 $835
Tree Spade
881U602 Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter 332/X4296 $11,154
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
Brush Cutter
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
EFFECTIVE: JANUARY 1, 2018 JCB 150T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
All prices and specifications subject to change without notice Page 107 of 217 JCB 150T Skid Steer USD Price Page
Index
2018
JCB COMPACT TRACK LOADER
210TNEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
EFFECTIVE: JANUARY 1, 2018 JCB 210T COMPACT TRACK LOADER
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
2.5L (151.4CID) 74 SAE Gross hp, Kohler KDI 2504 TCR engine, centrifugal dry type dual stage air
cleaner. Fuel filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 5.6 mph in both
forward and reverse. Standard Creep speed provides operation from 0 to 1/2 of full speed for special
applications. An optional two (2) speed transmission is available providing a low range of 0 - 5.6 mph
and a high range of 0 - 7.8 mph
Fitted with 12.6" (320mm) wide tracks provide a machine with of 66" and a ground bearing pressure of
6.2 psi.
18.5gpm @ 3335psi standard flow. Optional 30 gpm @ 3335psi available.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides access
to engine bay and daily maintenance and check points.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
Rated Operating Capacity of 1900 lbs, Radial Lift Loader Design provides radial lift path and increased
reach mid range lift path. Auxiliary circuit is standard for operation of hydraulic powered attachments.
Choice of Standard Mechanical or Optional Powered Quick Hitch. Hydraulic Float standard on all
models. Loader Options include: Parallel Lift in raise only and SRS (smooth ride system).
SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat with
seatbelt and operator restraint interlock for drive and loader functions. Cab units
are pressurized and available with heat or heat and A/C, sliding left window and full
side door. Right Hand glass as standard on canopy and cab builds.
All prices and specifications subject to change without notice Page 110 of 217 JCB 190T Compact Tracked USD Price Page Iss 2
JCB 210T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8611A 8611B 8611CSALES CANOPY CAB CAB
CODE ITEM STD FLOW HIGH FLOW HIGH FLOW
8A13 JCB 210T Tier 4 Tracked, Vertical Lift, New Generation, Compact Tracked Loader
881A222 12.6" (320 mm) Wide Rubber Track Set - 4 Roller (provides 66" width)
881B236
881B256
881C202 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F213
881G201 Foot Throttle
881G222 Radio with Speakers, Aerial and MP3 cable
881G254 Worklights with 2 rear lights for non A/C machines
881G281 2 Speed - Tracked
881G282 Powered Quick Hitch
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift)
881G287 Reversing Fan
881G295 ISO & Dual Hand Control Pattern
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155, 210, 150T, 210T)
881G312 Parallel Lift (Raise Only) - Radial Lift - High Flow (155, 210, 150T, 210T)
881G305 Block Heater - 110V Kohler Engine
SUGGESTED LIST PRICE $57,004 $60,856 $64,848
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch - 4 CYL
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
High Flow Hydraulics RL- 30 gpm (Requires 7 way Multi-Function Joystick Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch -
4 CYL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 111 of 217 JCB 190T Compact Tracked USD Price Page Iss 2
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8A13 JCB 210T Tier 4 Tracked, Vertical Lift, New Generation, Compact Tracked Loader $50,243
TRACKS (E)
881A222 12.6" (320 mm) Wide Rubber Track Set - 4 Roller (provides 66" width) $0
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B236 $739
Cab with Heater Packages
881B246 $2,767
Cab with Heater and A/C Packages
881B256 $4,660
MACHINE CONTROLS (E)
881C202 $1,147
881C205 $1,748
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 4 CYL
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
JCB 210T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 4 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch - 4 CYL
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 112 of 217 JCB 190T Compact Tracked USD Price Page Iss 2
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D340 GP Bucket - 68" - 14.3 cu-ft $1,262
881D302 GP Bucket - 72" - 15.4 cu-ft $1,221
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,834
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,889
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,862
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,919
Landscape Buckets
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,310
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,904
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,933
6 in 1 Buckets
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft $3,837
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,837
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,866
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
JCB 210T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
F.O.B.
SAVANNAH,
GA
EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 113 of 217 JCB 190T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F213 High Flow Hydraulics RL- 30 gpm (Requires 7 way Multi-Function Joystick Option) $1,136
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G315 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $953
881G316 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $953
881G305 Block Heater - 110V Kohler Engine $145
881G254 Worklights with 2 rear lights for non A/C machines $145
881G231 Rotating Beacon and Socket $151
881G304 White Noise Reverse Alarm $204
Loader Options
881G282 Powered Quick Hitch $846
881G283 SRS, Smooth Ride System - Vertical Lift $1,085
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift) $1,085
881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155, 210, 150T, 210T) $533
881G312 Parallel Lift (Raise Only) - Radial Lift - High Flow (155, 210, 150T, 210T) $533
Hydraulic Options
881G314 Biodegradable Oils $327
Operators Compartment Options
881G201 Foot Throttle $211
881G295 ISO & Dual Hand Control Pattern $166
881G211 Key Start/ Key Immobilizer - All machine configurations $435
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $666
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $752
881G220 3 inch wide Seatbelt $63
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $289
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $193
881G222 Radio with Speakers, Aerial and MP3 cable $323
881G310 Additional Soundproofing (for special applications) $473
U.S. DOLLAR
PRICE PAGES JCB 210T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 114 of 217 JCB 190T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G281 2 Speed - Tracked $1,623
881G287 Reversing Fan $908
881G288 Tool Kit, Basic $348
881G289 Tool Kit, Full $516
881G294 External Anolog Engine Hourmeter $146
881G308 Pre-Cleaner T4 $502
881G399 Spark Arrestor Muffler - 4 CYL 55 KW Engines (210,215,210T,215T) $249
Impact Protection/Guards
881G208 Impact Protection - Laminated Glass - for Canopy Builds $579
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $926
881G209 Impact Protection - Lexan Glass - for Canopy Builds $1,653
881G303 Laminate Glass to replace tempered as standard on cab builds $134
881G237 Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the full left side door$614
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $727
881G258 Right Hand Mesh to Replace Glass as Standard $203
881G267 Heavy Duty Rear Bars - Protective Bars for Adverse Applications (as a stand alone option) $1,196
881G292 Canopy Tracked Fender & Fuel Cap Protection $130
881G293 Cab Tracked Fender & Fuel Cap Protection $130
881G307 A/C FOPS Guard $556
APPLICATION PACKAGES
881G214 $2,170
881G216 $3,256
881G251 $2,465
881G252 $1,076
881G261 $2,058
881G263 $3,136
881G264 $3,009
881G266 $4,162
881G323 $5,047
BUCKET ACCESSORIES
881H325 Bolt on Edge for 68" Bucket (1727mm) $308
881H302 Bolt on Edge for 72" Bucket (1727mm) $318
881H326 Tooth Bar for 68" Bucket - Over Bucket (1727mm) $648
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $664
881H327 Tooth Bar for 68" Bucket - Over Bolt on Edge (1727mm) $916
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $926
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines Only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only
AGRI Package Build - Tracked (Includes: Radio, Heated Vinyl Suspension Seat, Block Heater 2 Speed, Quickhitch, SRS,
Foot Throttle, Parallel Lift, ISO & Dual Pattern Change Over)
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only
JCB 210T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must
order G208
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must
order G208
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh
to provide protection over laminated cab glass (Not for Canopy Builds)
Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection
over laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 115 of 217 JCB 190T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F213
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U664 78" Snow Blower - Standard Flow 332/X4384 $8,649
881U659 72" Snow Blower - High Flow Small Platform Only 334/L2463 $9,809
881U667 78" Snow Blower - High Flow Small Platform Only 334/L2491 $10,724
881U670 72" Snow Push 333/X6486 $3,107
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
EFFECTIVE: JANUARY 1, 2018 JCB 210T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 116 of 217 JCB 190T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F213
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $11,854
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,896
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,736
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,684
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $11,015
EFFECTIVE: JANUARY 1, 2018 JCB 210T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 117 of 217 JCB 190T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F213
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,083
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
Brush Cutter
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
EFFECTIVE: JANUARY 1, 2018 JCB 210T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
All prices and specifications subject to change without notice Page 118 of 217 JCB 190T Compact Tracked USD Price Page
Index
2018
JCB COMPACT TRACK LOADER
215TNEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
EFFECTIVE: JANUARY 1, 2018 JCB 215T COMPACT TRACK LOADER
SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat with
seatbelt and operator restraint interlock for drive and loader functions. Cab units
are pressurized and available with heat or heat and A/C, sliding left window and full
side door. Right Hand glass as standard on canopy and cab builds.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
Fitted with 12.6" (320mm) wide tracks provide a machine with of 66" and a ground bearing pressure of
6.5 psi.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 5.6 mph in both
forward and reverse. Standard Creep speed provides operation from 0 to 1/2 of full speed for special
applications. An optional two (2) speed transmission is available providing a low range of 0 - 5.6 mph
and a high range of 0 - 7.8 mph
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
2.5L (151.4CID) 74 SAE Gross hp, Kohler KDI 3504 TCR engine, centrifugal dry
type dual stage air cleaner. Fuel filter with water separator; 1000 CCA battery;
variable speed hydraulically driven fan.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides access
to engine bay and daily maintenance and check points.
18.5gpm @ 3335psi standard flow. Optional 30 gpm @ 3335psi available.
Rated Operating Capacity of 2050 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Powered Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only and SRS (smooth ride
system).
All prices and specifications subject to change without notice Page 121 of 217 JCB 205T Compact Tracked USD Price Page Iss 2
JCB 215T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8A14 8A14SALES CANOPY CAB
CODE ITEM STD FLOW HIGH FLOW
8A14 JCB 215T Tier 4 Tracked, Vertical Lift, New Generation, Compact Tracked Loader
881A222 12.6" (320 mm) Wide Rubber Track Set - 4 Roller (provides 66" width)
881B236
881B256
881C202 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C205
881D301 GP Bucket - 66" - 14.1 cu-ft
881E418 North American English Manual - for Cab machine
881E419 North American English Manual - for Canopy machine
881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F214
881G201 Foot Throttle
881G222 Radio with Speakers, Aerial and MP3 cable
881G254 Worklights with 2 rear lights for non A/C machines
881G279 Vinyl Mechanical Suspension Seat
881G281 2 Speed - Tracked
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift)
881G287 Reversing Fan
881G295 ISO & Dual Hand Control Pattern
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 215, 215T)
881G305 Block Heater - 110V Kohler Engine
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 215, 215T)
SUGGESTED LIST PRICE $57,773 $66,318
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch - 4 CYL
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
High Flow Hydraulics VL- 30 gpm (Requires 7 way Multi-Function Joystick Option)
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch -
4 CYL
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 122 of 217 JCB 205T Compact Tracked USD Price Page Iss 2
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8A14 JCB 215T Tier 4 Tracked, Vertical Lift, New Generation, Compact Tracked Loader $50,753
TRACKS (E)
881A222 12.6" (320 mm) Wide Rubber Track Set - 4 Roller (provides 66" width) $0
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B236 $739
Cab with Heater Packages
881B246 $2,767
Cab with Heater and A/C Packages
881B256 $4,660
MACHINE CONTROLS (E)
881C202 $1,147
881C205 $1,748
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 4 CYL
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
JCB 215T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical
Quickhitch - 4 CYL
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch - 4 CYL
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 123 of 217 JCB 205T Compact Tracked USD Price Page Iss 2
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D340 GP Bucket - 68" - 14.3 cu-ft $1,262
881D302 GP Bucket - 72" - 15.4 cu-ft $1,221
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,834
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,889
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,862
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,919
Landscape Buckets
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,310
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,904
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,933
6 in 1 Buckets
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft $3,837
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,837
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,866
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
U.S. DOLLAR PRICE PAGES JCB 215T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 124 of 217 JCB 205T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E417 Spanish Export (American) Manual $0
881E418 North American English Manual - for Cab machine $0
881E419 North American English Manual - for Canopy machine $0
881E420 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0
881F214 High Flow Hydraulics VL- 30 gpm (Requires 7 way Multi-Function Joystick Option) $1,136
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G315 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $953
881G316 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $953
881G254 Worklights with 2 rear lights for non A/C machines $145
881G305 Block Heater - 110V Kohler Engine $145
881G231 Rotating Beacon and Socket $151
881G304 White Noise Reverse Alarm $204
Loader Options
881G282 Powered Quick Hitch $846
881G283 SRS, Smooth Ride System - Vertical Lift $1,085
881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift) $1,085
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 215, 215T) $533
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 215, 215T) $533
Hydraulic Options
881G314 Biodegradable Oils $327
Operators Compartment Options
881G201 Foot Throttle $211
881G295 ISO & Dual Hand Control Pattern $166
881G211 Key Start/ Key Immobilizer - All machine configurations $435
881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $666
881G219 Cloth Air Suspension Seat with Adjustable Control Pods $752
881G220 3 inch wide Seatbelt $63
881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $289
881G250 2 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $193
881G222 Radio with Speakers, Aerial and MP3 cable $323
881G310 Additional Soundproofing (for special applications) $473
U.S. DOLLAR
PRICE PAGES JCB 215T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 125 of 217 JCB 205T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G281 2 Speed - Tracked $1,623
881G287 Reversing Fan $908
881G288 Tool Kit, Basic $348
881G289 Tool Kit, Full $516
881G294 External Anolog Engine Hourmeter $146
881G308 Pre-Cleaner T4 $502
881G297 Spark Arrestor Muffler - 4 CYL $249
Impact Protection/Guards
881G208 Impact Protection - Laminated Glass - for Canopy Builds $579
881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $926
881G209 Impact Protection - Lexan Glass - for Canopy Builds $1,653
881G303 Laminate Glass to replace tempered as standard on cab builds $134
881G237 Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the full left side door$614
881G300 Front Mesh Guard for Canopy Machines (No front glass required) $727
881G258 Right Hand Mesh to Replace Glass as Standard $203
881G267 Heavy Duty Rear Bars - Protective Bars for Adverse Applications (as a stand alone option) $1,196
881G292 Canopy Tracked Fender & Fuel Cap Protection $130
881G293 Cab Tracked Fender & Fuel Cap Protection $130
881G307 A/C FOPS Guard $556
APPLICATION PACKAGES
881G214 $2,170
881G216 $3,256
881G251 $2,465
881G252 $1,076
881G261 $2,058
881G263 $3,136
881G264 $3,009
881G266 $4,162
BUCKET ACCESSORIES
881H325 Bolt on Edge for 68" Bucket (1727mm) $308
881H302 Bolt on Edge for 72" Bucket (1727mm) $318
881H326 Tooth Bar for 68" Bucket - Over Bucket (1727mm) $648
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $664
881H327 Tooth Bar for 68" Bucket - Over Bolt on Edge (1727mm) $916
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $926
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only
JCB 215T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G208
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G208
Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass (Not for Canopy Builds)
Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated cab
glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been ordered
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines Only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 126 of 217 JCB 205T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F214
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
Snow Removal Attachments
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U664 78" Snow Blower - Standard Flow 332/X4384 $8,649
881U659 72" Snow Blower - High Flow Small Platform Only 334/L2463 $9,809
881U667 78" Snow Blower - High Flow Small Platform Only 334/L2491 $10,724
881U670 72" Snow Push 333/X6486 $3,107
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
EFFECTIVE: JANUARY 1, 2018 JCB 215T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 127 of 217 JCB 205T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F214
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $11,854
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,896
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,736
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,684
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $11,015
EFFECTIVE: JANUARY 1, 2018 JCB 215T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 128 of 217 JCB 205T Compact Tracked USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F214
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,083
881U532 Bale Spear 333/L5627 $835
Tree Spade
881U602 Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter 332/X4296 $11,154
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
Brush Cutter
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
EFFECTIVE: JANUARY 1, 2018 JCB 215T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
All prices and specifications subject to change without notice Page 129 of 217 JCB 205T Compact Tracked USD Price Page
Index
2018
JCB COMPACT TRACK LOADER
250TNEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
Engine
Transmission
Rubber Tracks:
Brakes
Electrical
Instruments
Cab or Canopy
Hydraulics
Loader
Serviceability
U.S. DOLLAR PRICE PAGES
Cab tilts forward to provide further access to the hydraulic components. Rear door provides class
leading access to engine bay and daily maintenacne and check points.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner. Fuel
filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.
Meets IP69 water ingress standard. Worklights, 2 Front and 1 Rear, Reverse Alarm, Horn, and 12V
Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels. Standard electronic
throttle control with optional foot throttle.
SAE certified ROPS/FOPS, left side entry. Mechancial vinyl suspension seat with retractable seatbelt and
operator restraint interlock for drive and loader functions. Cab units are pressurized and available with
heat or heat and A/C, sliding left window, and full side door. Right Hand glass standard on canopy and
cab builds.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
Rated Operating Capacity of 2550 lbs, Radial Lift Loader Design provides for maximum loader lift
breakout force for superior digging performance. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic float
standard on all models. Loader options include: Parallel Lift in raise only, SRS (smooth ride system) left
hand auxiliary pipework.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Fitted with 15" (400mm) wide tracks provide a machine with of 73" and a ground bearing pressure of 4.8
psi. Optional 17.7' (450mm) wide tracks reduce ground bearing pressure to 4.36 psi.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 6.8 mph in both
forward and reverse. Standard Creep Speed provides operation from 0 to 50% of full speed for special
applications. An optional two (2) speed transmission is available providing a low range of 0 - 6.8 mph
and a high range of 0 - 12.4 mph.
EFFECTIVE: JANUARY 1, 2018 JCB 250T COMPACT TRACK LOADER
All prices and specifications subject to change without notice Page 132 of 217 JCB 225T Compact Tracked USD Price Page Iss 3
JCB 250T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8613A 8613B 8613CSALES CANOPY CAB CAB
CODE ITEM STD FLOW STD FLOW HIGH FLOW
8613 JCB 250T Tracked, Radial Lift, New Generation, Compact Tracked Loader
881A326 400 mm Wide Solideal Rubber Tracks
881B339
881B359
881C311
881C312
881D341
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F307 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F308
881G025
881G074 2 Speed - Tracked Machines
881G076 Worklights with 2 rear lights for non A/C machines
881G077 Smooth Ride System (SRS)
881G084 Foot Throttle
881G085 Reversing Fan - Global (Gear Pump)
881G091 Vinyl Air Suspension Seat
881G095 Parallel Lift Radial Lift Models - 250, 250T
881G105 Vinyl Mechanical Suspension Seat
881G096 ISO & Dual Hand Control Pattern Changeover
SUGGESTED LIST PRICE $58,515 $62,142 $66,463
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
GP Bucket - 75" - 15.8 cu-ft
Engine Block Heater - 110V
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float
and Manual Lock Quickhitch
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.
Required with High Flow Hydraulics
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick
option 881C312)
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 133 of 217 JCB 225T Compact Tracked USD Price Page Iss 3
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8613 JCB 250T Tracked, Radial Lift, New Generation, Compact Tracked Loader $51,041
TRACKS (E)
881A326 400 mm Wide Solideal Rubber Tracks $541
881A322 17.7" (450 mm) Wide Solideal Rubber Tracks - provides an overall Machine width of 78" $868
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B339 $942
Cab with Heater Packages
881B349 $3,050
Cab with Heater and A/C Packages
881B359 $5,020
MACHINE CONTROLS (E)
881C311 $1,156
881C312 $1,746
JCB 250T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 134 of 217 JCB 225T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D341 GP Bucket - 75" - 15.8 cu-ft $1,399
881D303 GP Bucket - 78" - 16.7 cu-ft $1,603
881D304 GP Bucket - 84" - 18.1 cu-ft $1,679
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,940
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,990
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,390
881D345 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,969
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,018
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,419
LANDSCAPE BUCKETS
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,709
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,866
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,005
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,277
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,034
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,307
6 IN 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,371
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,934
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,403
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,001
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,433
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,031
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
U.S. DOLLAR PRICE PAGES JCB 250T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and/or Attachments from pages 5 to 9.
All prices and specifications subject to change without notice Page 135 of 217 JCB 225T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F307 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F308 $1,331
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $961
881G079 Roadlight Kit with Brake lights for A/C machines $961
881G076 Worklights with 2 rear lights for non A/C machines $44
881G089 Grid Heater for Canopy builds (Starting aid) $139
881G025 Engine Block Heater - 110V $146
881G031 Rotating Beacon and Socket $152
881G043 White Noise Reverse Alarm $204
Loader Options
881G075 Powered Quick Hitch $868
881G077 Smooth Ride System (SRS) $1,086
881G095 Parallel Lift Radial Lift Models - 250, 250T $555
Hydraulic Options
881G021 Biodegradable Oils $329
Operators Compartment Options
881G084 Foot Throttle $220
881G096 ISO & Dual Hand Control Pattern Changeover $166
881G022 Radio with Speakers and Aerial $324
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G011 Key Start/ Key Immobilizer- All machine configurations $435
881G091 Vinyl Air Suspension Seat $666
881G019 Cloth Air Suspension Seat $752
881G020 3 inch Seatbelt $64
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $289
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $192
U.S. DOLLAR
PRICE PAGES JCB 250T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312)
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 136 of 217 JCB 225T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G074 2 Speed - Tracked Machines $1,639
881G085 Reversing Fan - Global (Gear Pump) $908
881G092 Spark Arrestor Muffler $260
881G083 Tool Kit - Basic $348
881G098 Tool Kit - Full $516
881G108 Pre-Cleaner for adverse applications $388
881G090 External Engine Hourmeter $146
Impact Protection/Guards
881G101 Cab Tracked Fender & Fuel Cap Protection $130
881G037 Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side door.$615
881G110 Front Work Light Protection - FOPS Required - Not Compatible with Roadlights $285
881G112 Auxiliary Guard $339
881G113 A/C FOPS Guard with Side Protection - FOPS Required $1,297
881G072 A/C FOPS Guard $555
881G109 Cooling Pack Guard $812
881G119 Light Duty Light Guard $135
881G114 Track Tube Guard $441
881G070 Heavy Duty Rear Bars for Adverse Applications $1,085
APPLICATION PACKAGES
881G014 $2,170
881G016 $3,257
881G051 $2,464
881G052 $1,076
881G061 $2,058
881G063 $3,136
881G064 $3,009
881G066 $4,162Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
JCB 250T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order
G008
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order
G008Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to
provide protection over laminated cab glass.
Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide protection
over laminated cab glass.
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 137 of 217 JCB 225T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKET ACCESSORIES INDEX
881H316 Bolt on Edge for 75" Bucket (1905mm) $327
881H334 Bolt on Edge for 76" Scrap Grapple $736
881H303 Bolt on Edge for 78" Bucket (1829mm) $336
881H335 Bolt on Edge for 82" Scrap Grapple $807
881H304 Bolt on Edge for 84" Bucket (1981mm) $372
881H328 Bolt on Edge for 96" Snow Bucket (2438mm) $499
881H329 Bolt on Edge for 108" Snow Bucket (2743mm) $519
881H330 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) $446
881H317 Tooth Bar for 75" bucket - Over Bucket (1905mm) $675
881H307 Tooth Bar for 78" Bucket - Over Bucket (1829mm) $687
881H308 Tooth Bar for 84" Bucket - Over Bucket (1981mm) $712
881H318 Tooth Bar for 75" bucket - Over Bolt on Edge (1905mm) $936
881H311 Tooth Bar for 78" Bucket - Over Bolt on Edge (1829mm) $977
881H312 Tooth Bar for 84" Bucket - Over Bolt on Edge (1981mm) $956
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
JCB 250T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 138 of 217 JCB 225T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $2,239
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $2,289
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,340
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,900
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $3,004
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $3,027
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,644
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,965
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $5,596
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U249 84" Pick-Up Sweeper 334/P2839 $7,403
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,919
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,379
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
881U352 HM386Q (includes Chisel & Moil) - *980/68700 Mounting Bracket required* 980/A3483 $12,109
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,861
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
881U401 Planetary Drive Auger - High Flow - (includes mounting bracket & hoses) 332/L3979 $5,645
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
EFFECTIVE: JANUARY 1, 2018 JCB 250T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 139 of 217 JCB 225T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $11,854
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,993
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,245
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $14,093
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,541
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $10,013
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,383
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,633
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U511 78" Tiller - 6 inch tines - High Flow 332/X4381 $6,624
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,896
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,684
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,790
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,736
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $11,015
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,575
EFFECTIVE: JANUARY 1, 2018 JCB 250T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 140 of 217 JCB 225T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH, GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Forestry Cutters
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,769
881U519 96" Dozer Blade - 6 Way Hydraulic 332/X4287 $7,771
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,083
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,522
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,162
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
881U522 48" Trencher with 6" wide chain, crumber and hoses - High Flow 332/X4290 $7,625
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
881U524 72" Brush Cutter - High Flow 333/X4409 $7,365
881U525 78' Brush Cutter - High Flow 333/X4383 $7,701
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Tree Spades
881U602 332/X4296 $11,154
881U603 332/X4297 $14,042
881U604 332/X4298 $14,549
Tree Spade with Blades / 25 degree cutting angle / 24" - 36" ball diameter
Tree Spade with Blades / 25 degree cutting angle / 32" - 44" ball diameter
EFFECTIVE: JANUARY 1, 2018 JCB 250T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter
All prices and specifications subject to change without notice Page 141 of 217 JCB 225T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH, GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4301 $23,722
881U610 40" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4302 $27,875
Saws
881U611 Rock Saw - 18" Depth - High Flow 332/L7244 $20,302
881U612 Rock Saw - 24" Depth - High Flow 332/L7269 $22,524
Snow Removal Attachments
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U651 84" Snow Blade - Manual Angle 332/X4348 $2,132
881U652 96" Snow Blade - Manual Angle 332/X4349 $2,157
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U654 84" Snow Blade - Hydraulic Angle 332/X4351 $2,696
881U655 96" Snow Blade - Hydraulic Angle 332/X4352 $2,747
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $4,630
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,681
881U658 120" Heavy Duty Snow Blade - Hydraulic Angle 332/L3932 $4,775
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U664 78" Snow Blower - Standard Flow 332/X4384 $8,649
881U665 84" Snow Blower - Standard Flow 332/X4385 $8,674
881U660 72" Snow Blower - High Flow 332/X4399 $9,809
881U661 78" Snow Blower - High Flow 332/X4400 $10,248
881U662 84" Snow Blower - High Flow 332/X4401 $13,861
881U670 72" Snow Push 333/X6486 $3,107
881U671 84" Snow Push 333/X6487 $3,400
881U672 96" Snow Push 333/X6488 $3,610
JCB 250T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 142 of 217 JCB 225T Compact Tracked USD Price Page Iss 3
Index
2018
JCB COMPACT TRACK LOADER
270TNEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner. Fuel
filter with water separator, 1000 CCA battery; variable speed hydraulically driven fan.
Rated Operating Capacity of 2750 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride
system), left hand auxiliary pipework.
Fitted with 17.7" wide tracks provide a machine width of 78" and a ground bearing pressure
of 4.6 psi.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 5.7 mph in both
forward and reverse. Standard Creep speed provides operation from 0 to 1/2 of full speed for special
applications. An optional two (2) speed transmission is available providing a low range of 0 - 4.8 mph
and a high range of 0 - 7.8 mph
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides access
to engine bay and daily maintenance and check points.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat with
seatbelt and operator restraint interlock for drive and loader functions. Cab units
are pressurized and available with heat or heat and A/C, sliding left window and full
side door. Right Hand glass standard on canopy and cab builds.
EFFECTIVE: JANUARY 1, 2018 JCB 270T COMPACT TRACK LOADER
All prices and specifications subject to change without notice Page 145 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
JCB 270T COMPACT TRACK LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8614A 8614B 8614CSALES CANOPY CAB CAB
CODE ITEM STD FLOW STD FLOW HIGH FLOW
8614 JCB 270T Tracked, Vertical Lift, New Generation, Compact Tracked Loader
881A322 17.7" (450 mm) Wide Solideal Rubber Tracks - provides an overall Machine width of 78"
881B339
881B359
881C311
881C312
881D303
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F306
881G022 Radio with Speakers and Aerial
881G025
881G074 2 Speed - Tracked Machines
881G075 Powered Quick Hitch
881G076 Worklights with 2 rear lights for non A/C machines
881G077 Smooth Ride System (SRS)
881G084 Foot Throttle
881G085 Reversing Fan - Global (Gear Pump)
881G091 Vinyl Air Suspension Seat
881G096 ISO & Dual Hand Control Pattern Changeover
881G097 Parallel Lift Vertical Lift Model - 270T
SUGGESTED LIST PRICE $61,084 $65,929 $71,035
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Engine Block Heater - 110V
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
GP Bucket - 78" - 16.7 cu-ft
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 146 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
U.S. DOLLAR PRICE
PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8614 JCB 270T Tracked, Vertical Lift, New Generation, Compact Tracked Loader $53,891
TRACKS (E)
881A326 400 mm Wide Solideal Rubber Tracks $541
881A322 17.7" (450 mm) Wide Solideal Rubber Tracks - provides an overall Machine width of 78" $868
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B339 $942
Cab with Heater Packages
881B349 $3,050
Cab with Heater and A/C Packages
881B359 $5,020
MACHINE CONTROLS (E)
881C311 $1,156
881C312 $1,746
JCB 270T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 147 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D303 GP Bucket - 78" - 16.7 cu-ft $1,603
881D304 GP Bucket - 84" - 18.1 cu-ft $1,679
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,990
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,390
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,018
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,419
Landscape Buckets
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,709
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,866
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,005
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,277
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,034
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,307
6 in 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,371
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,934
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,403
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,001
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,433
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,031
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
U.S. DOLLAR PRICE PAGES JCB 270T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
All prices and specifications subject to change without notice Page 148 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F306 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312) $1,331
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $961
881G079 Roadlight Kit with Brake lights for A/C machines $961
881G076 Worklights with 2 rear lights for non A/C machines $44
881G089 Grid Heater for Canopy builds (Starting aid) $139
881G025 Engine Block Heater - 110V $146
881G031 Rotating Beacon and Socket $152
881G043 White Noise Reverse Alarm $204
Loader Options
881G075 Powered Quick Hitch $868
#REF! #REF! #REF!
881G077 Smooth Ride System (SRS) $1,086
881G097 Parallel Lift Vertical Lift Model - 270T $555
Hydraulic Options
881G021 Biodegradable Oils $329
Operators Compartment Options
881G084 Foot Throttle $220
881G096 ISO & Dual Hand Control Pattern Changeover $166
881G022 Radio with Speakers and Aerial $324
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G011 Key Start/ Key Immobilizer- All machine configurations $435
881G091 Vinyl Air Suspension Seat $666
881G019 Cloth Air Suspension Seat $752
881G020 3 inch Seatbelt $64
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $289
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $192
U.S. DOLLAR
PRICE PAGES JCB 270T COMPACT TRACK LOADER LOADER EFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 149 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G074 2 Speed - Tracked Machines $1,639
881G085 Reversing Fan - Global (Gear Pump) $908
881G092 Spark Arrestor Muffler $260
881G083 Tool Kit - Basic $348
881G098 Tool Kit - Full $516
881G108 Pre-Cleaner for adverse applications $388
881G090 External Engine Hourmeter $146
Impact Protection/Guards
881G008 Impact Protection - Laminated Glass - for Canopy builds $578
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,829
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $926
881G107 Laminate glass to replace tempered glass as standard on cab builds only - Tier 4 $135
881G116 Front ¾" Lexan with front mesh guard $2,032
881G112 Auxiliary Guard $339
881G113 A/C FOPS Guard with Side Protection - FOPS Required $1,297
881G114 Track Tube Guard $441
881G071 Front Mesh Guard for canopy machines (NO front glass required) $727
881G054 Right Hand Mesh to Replace Glass as Standard $173
881G100 Canopy Tracked Fender & Fuel Cap Protection $130
881G101 Cab Tracked Fender & Fuel Cap Protection $130
881G037 Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side door.$615
881G054 Right Hand Mesh to Replace Glass as Standard $173
881G110 Front Work Light Protection - FOPS Required - Not Compatible with Roadlights $285
881G072 A/C FOPS Guard $555
881G109 Cooling Pack Guard $812
881G119 Light Duty Light Guard $135
881G070 Heavy Duty Rear Bars for Adverse Applications $1,085
APPLICATION PACKAGES
881G014 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008 $2,170
881G016 Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008 $3,257
881G051 Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass.$2,464
881G052 Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass.$1,076
881G061 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only $2,058
881G063 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only $3,136
881G064 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only $3,009
881G066 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only $4,162
881G121 AGRI Package Build - Tracked (Includes: Radio, Heated Vinyl Suspension Seat, Block Heater 2 Speed, Quickhitch, Foot Throttle, ISO & Dual Pattern Change Over)$5,226
JCB 270T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 150 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
APPLICATION PACKAGES INDEX
881G014 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008 $2,170
881G016 Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008 $3,257
881G051 $2,464
881G052 $1,076
881G061 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only $2,058
881G063 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only $3,136
881G064 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only $3,009
881G066 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only $4,162
881G121 $5,226
BUCKET ACCESSORIES
881H316 Bolt on Edge for 75" Bucket (1905mm) $327
881H334 Bolt on Edge for 76" Scrap Grapple $736
881H303 Bolt on Edge for 78" Bucket (1829mm) $336
881H335 Bolt on Edge for 82" Scrap Grapple $807
881H304 Bolt on Edge for 84" Bucket (1981mm) $372
881H328 Bolt on Edge for 96" Snow Bucket (2438mm) $499
881H329 Bolt on Edge for 108" Snow Bucket (2743mm) $519
881H330 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) $446
881H317 Tooth Bar for 75" bucket - Over Bucket (1905mm) $675
881H307 Tooth Bar for 78" Bucket - Over Bucket (1829mm) $687
881H308 Tooth Bar for 84" Bucket - Over Bucket (1981mm) $712
881H318 Tooth Bar for 75" bucket - Over Bolt on Edge (1905mm) $936
881H311 Tooth Bar for 78" Bucket - Over Bolt on Edge (1829mm) $977
881H312 Tooth Bar for 84" Bucket - Over Bolt on Edge (1981mm) $956
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
AGRI Package Build - Tracked (Includes: Radio, Heated Vinyl Suspension Seat, Block Heater 2 Speed, Quickhitch, Foot Throttle, ISO &
Dual Pattern Change Over)
JCB 270T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass.
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 151 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $2,239
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $2,289
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,340
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,900
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $3,004
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $3,027
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,644
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,965
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $5,596
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U249 84" Pick-Up Sweeper 334/P2839 $7,403
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,919
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,379
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
881U352 HM386Q (includes Chisel & Moil) - *980/68700 Mounting Bracket required* 980/A3483 $12,109
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,861
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
881U401 Planetary Drive Auger - High Flow - (includes mounting bracket & hoses) 332/L3979 $5,645
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
EFFECTIVE: JANUARY 1, 2018 JCB 270T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 152 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
881U352 HM386Q (includes Chisel & Moil) - *980/68700 Mounting Bracket required* 980/A3483 $12,109
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,861
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
881U401 Planetary Drive Auger - High Flow - (includes mounting bracket & hoses) 332/L3979 $5,645
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
EFFECTIVE: JANUARY 1, 2018 JCB 270T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 153 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $11,854
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,993
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,245
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $14,093
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,541
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $10,013
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,383
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,633
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U511 78" Tiller - 6 inch tines - High Flow 332/X4381 $6,624
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,896
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,684
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,790
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,736
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $11,015
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,575
Forestry Cutters
881U516 60" Forestry Cutting Head - High Flow 334/L8351 $32,580
JCB 270T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 154 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,769
881U519 96" Dozer Blade - 6 Way Hydraulic 332/X4287 $7,771
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,083
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,522
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,162
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
881U522 48" Trencher with 6" wide chain, crumber and hoses - High Flow 332/X4290 $7,625
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
881U524 72" Brush Cutter - High Flow 333/X4409 $7,365
881U525 78' Brush Cutter - High Flow 333/X4383 $7,701
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Tree Spades
881U602 Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter 332/X4296 $11,154
881U603 Tree Spade with Blades / 25 degree cutting angle / 24" - 36" ball diameter 332/X4297 $14,042
881U604 Tree Spade with Blades / 25 degree cutting angle / 32" - 44" ball diameter 332/X4298 $14,549
EFFECTIVE: JANUARY 1, 2018 JCB 270T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
All prices and specifications subject to change without notice Page 155 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4301 $23,722
881U610 40" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4302 $27,875
Saws
881U611 Rock Saw - 18" Depth - High Flow 332/L7244 $20,302
881U612 Rock Saw - 24" Depth - High Flow 332/L7269 $22,524
Snow Removal Attachments
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U651 84" Snow Blade - Manual Angle 332/X4348 $2,132
881U652 96" Snow Blade - Manual Angle 332/X4349 $2,157
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U654 84" Snow Blade - Hydraulic Angle 332/X4351 $2,696
881U655 96" Snow Blade - Hydraulic Angle 332/X4352 $2,747
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $4,630
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,681
881U658 120" Heavy Duty Snow Blade - Hydraulic Angle 332/L3932 $4,775
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U664 78" Snow Blower - Standard Flow 332/X4384 $8,649
881U665 84" Snow Blower - Standard Flow 332/X4385 $8,674
881U660 72" Snow Blower - High Flow 332/X4399 $9,809
881U661 78" Snow Blower - High Flow 332/X4400 $10,248
881U662 84" Snow Blower - High Flow 332/X4401 $13,861
881U670 72" Snow Push 333/X6486 $3,107
881U671 84" Snow Push 333/X6487 $3,400
881U672 96" Snow Push 333/X6488 $3,610
JCB 270T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 156 of 217 JCB 260T Compact Tracked USD Price Page Iss 3
Index
2018
JCB COMPACT TRACK LOADER
300TNEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
SERVICEABILITY
SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat with
seatbelt and operator restraint interlock for drive and loader functions. Cab units
are pressurized and available with heat or heat and A/C, sliding left window and full
side door. Right Hand glass standard on canopy and cab builds.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides access
to engine bay and daily maintenance and check points.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
Rated Operating Capacity of 3000 lbs, Vertical Lift Loader Design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic
Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride
system), left hand auxiliary pipework.
EFFECTIVE: JANUARY 1, 2018
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 5.7 mph in both
forward and reverse. Standard Creep speed provides operation from 0 to 1/2 of full speed for special
applications. An optional two (2) speed transmission is available providing a low range of 0 - 4.8 mph
and a high range of 0 - 7.8 mph
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage
air cleaner. Fuel filter with water separator, 1000 CCA battery; variable speed
hydraulically driven fan.
Fitted with 17.7" wide tracks provide a machine width of 78" and a ground bearing pressure of 4.8 psi.
JCB 300T COMPACT TRACK LOADER
All prices and specifications subject to change without notice Page 159 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
JCB 300T COMPACT TRACK LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8615A 8615B 8615CSALES CANOPY CAB CAB
CODE ITEM STD FLOW STD FLOW HIGH FLOW
8615 JCB 300T Tracked, Vertical Lift, New Generation, Compact Tracked Loader
881A322 17.7" (450 mm) Wide Solideal Rubber Tracks - provides an overall Machine width of 78"
881B339
881B359
881C311
881C312
881D303
881E118 North American English Manual - for Cab machine
881E119 North American English Manual - for Canopy machine
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F310
881G022 Radio with Speakers and Aerial
881G025
881G074 2 Speed - Tracked Machines
881G075 Powered Quick Hitch
881G076 Worklights with 2 rear lights for non A/C machines
881G077 Smooth Ride System (SRS)
881G082 Reversing Fan
881G084 Foot Throttle
881G091 Vinyl Air Suspension Seat
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T
881G096 ISO & Dual Hand Control Pattern Changeover
SUGGESTED LIST PRICE $69,597 $73,630 $79,402
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
Engine Block Heater - 110V
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
GP Bucket - 78" - 16.7 cu-ft
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 160 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8615 JCB 300T Tracked, Vertical Lift, New Generation, Compact Tracked Loader $62,258
TRACKS (E)
881A322 17.7" (450 mm) Wide Solideal Rubber Tracks - provides an overall Machine width of 78" $868
OPERATOR ENCLOSURES (E) pick one
Canopy Packages
881B339 $942
Cab with Heater Packages
881B349 $3,050
Cab with Heater and A/C Packages
881B359 $5,020
MACHINE CONTROLS (E)
881C311 $1,156
881C312 $1,746
JCB 300T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch
Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock
Quickhitch
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 161 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D303 GP Bucket - 78" - 16.7 cu-ft $1,603
881D304 GP Bucket - 84" - 18.1 cu-ft $1,679
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,990
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,390
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,018
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,419
Landscape Buckets
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,709
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,866
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,005
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,277
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,034
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,307
6 in 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,371
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,934
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,403
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,001
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,433
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,031
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
U.S. DOLLAR PRICE PAGES JCB 300T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
To complete a machine order, select one code from each E (Essential) feature category below.
All prices and specifications subject to change without notice Page 162 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E119 North American English Manual - for Canopy machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E) pick one
881F309 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0
881F310 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312) $1,331
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G078 Roadlight Kit with Brake lights for non A/C machines $961
881G079 Roadlight Kit with Brake lights for A/C machines $961
881G076 Worklights with 2 rear lights for non A/C machines $44
881G089 Grid Heater for Canopy builds (Starting aid) $139
881G025 Engine Block Heater - 110V $146
881G031 Rotating Beacon and Socket $152
881G043 White Noise Reverse Alarm $204
Loader Options
#REF! #REF! #REF!
881G075 Powered Quick Hitch $868
881G077 Smooth Ride System (SRS) $1,086
881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T $555
Hydraulic Options
881G021 Biodegradable Oils $329
Operators Compartment Options
881G084 Foot Throttle $220
881G022 Radio with Speakers and Aerial $324
881G096 ISO & Dual Hand Control Pattern Changeover $166
881G018 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $435
881G011 Key Start/ Key Immobilizer- All machine configurations $435
881G091 Vinyl Air Suspension Seat $666
881G019 Cloth Air Suspension Seat $752
881G020 3 inch Seatbelt $64
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $289
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $192
U.S. DOLLAR
PRICE PAGES JCB 300T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 163 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages) INDEX
Other Options
881G074 2 Speed - Tracked Machines $1,639
881G092 Spark Arrestor Muffler $260
881G082 Reversing Fan $908
881G083 Tool Kit - Basic $348
881G098 Tool Kit - Full $516
881G108 Pre-Cleaner for adverse applications $388
881G090 External Engine Hourmeter $146
Impact Protection/Guards
881G008 Impact Protection - Laminated Glass - for Canopy builds $578
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,829
881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $926
881G107 Laminate glass to replace tempered glass as standard on cab builds only - Tier 4 $135
881G116 Front ¾" Lexan with front mesh guard $2,032
881G071 Front Mesh Guard for canopy machines (NO front glass required) $727
881G054 Right Hand Mesh to Replace Glass as Standard $173
881G100 Canopy Tracked Fender & Fuel Cap Protection $130
881G101 Cab Tracked Fender & Fuel Cap Protection $130
881G037 Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side door.$615
881G110 Front Work Light Protection - FOPS Required - Not Compatible with Roadlights $285
881G112 Auxiliary Guard $339
881G113 A/C FOPS Guard with Side Protection - FOPS Required $1,297
881G072 A/C FOPS Guard $555
881G109 Cooling Pack Guard $812
881G119 Light Duty Light Guard $135
881G114 Track Tube Guard $441
881G070 Heavy Duty Rear Bars for Adverse Applications $1,085
APPLICATION PACKAGES
881G014 $2,170
881G016 $3,257
881G051 $2,464
881G052 $1,076
881G061 $2,058
881G063 $3,136
881G064 $3,009
881G066 $4,162
JCB 300T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008
Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008
Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide protection over
laminated cab glass.
Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only
Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 164 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
APPLICATION PACKAGES INDEX
881G014 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008 $2,170
881G016 Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008 $3,257
881G051 Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass.$2,464
881G052 Enclosed Cab Additional Side Screen Protection Package. Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass.$1,076
881G061 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only $2,058
881G063 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only $3,136
881G064 Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only $3,009
881G066 Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only $4,162
BUCKET ACCESSORIES
881H303 Bolt on Edge for 78" Bucket (1829mm) $336
881H335 Bolt on Edge for 82" Scrap Grapple $807
881H304 Bolt on Edge for 84" Bucket (1981mm) $372
881H328 Bolt on Edge for 96" Snow Bucket (2438mm) $499
881H329 Bolt on Edge for 108" Snow Bucket (2743mm) $519
881H330 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) $446
881H307 Tooth Bar for 78" Bucket - Over Bucket (1829mm) $687
881H308 Tooth Bar for 84" Bucket - Over Bucket (1981mm) $712
881H311 Tooth Bar for 78" Bucket - Over Bolt on Edge (1829mm) $977
881H312 Tooth Bar for 84" Bucket - Over Bolt on Edge (1981mm) $956
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
JCB 300T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 165 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $2,239
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $2,289
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,340
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,900
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $3,004
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $3,027
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,644
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,965
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $5,596
EFFECTIVE: JANUARY 1, 2018 JCB 300T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
All prices and specifications subject to change without notice Page 166 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U249 84" Pick-Up Sweeper 334/P2839 $7,403
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,919
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,379
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
881U352 HM386Q (includes Chisel & Moil) - *980/68700 Mounting Bracket required* 980/A3483 $12,109
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,861
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
881U401 Planetary Drive Auger - High Flow - (includes mounting bracket & hoses) 332/L3979 $5,645
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
JCB 300T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
PART NUMBER
All prices and specifications subject to change without notice Page 167 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
EFFECTIVE: JANUARY 1, 2018 JCB 300T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES
PART NUMBER
All prices and specifications subject to change without notice Page 168 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Landscape Development Tools
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $11,854
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,993
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,245
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $14,093
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,541
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $10,013
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,383
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,633
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U511 78" Tiller - 6 inch tines - High Flow 332/X4381 $6,624
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,896
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,684
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,790
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,736
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $11,015
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,575
Forestry Cutters
881U516 60" Forestry Cutting Head - High Flow 334/L8351 $32,580
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,769
881U519 96" Dozer Blade - 6 Way Hydraulic 332/X4287 $7,771
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,083
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,522
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,162
881U532 Bale Spear 333/L5627 $835
JCB 300T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
PART NUMBER
All prices and specifications subject to change without notice Page 169 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
881U522 48" Trencher with 6" wide chain, crumber and hoses - High Flow 332/X4290 $7,625
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
881U524 72" Brush Cutter - High Flow 333/X4409 $7,365
881U525 78' Brush Cutter - High Flow 333/X4383 $7,701
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Tree Spades
881U602 332/X4296 $11,154
881U603 332/X4297 $14,042
881U604 332/X4298 $14,549
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4301 $23,722
881U610 40" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4302 $27,875
Saws
881U611 Rock Saw - 18" Depth - High Flow 332/L7244 $20,302
881U612 Rock Saw - 24" Depth - High Flow 332/L7269 $22,524
Tree Spade with Blades / 25 degree cutting angle / 24" - 36" ball diameter
Tree Spade with Blades / 25 degree cutting angle / 32" - 44" ball diameter
EFFECTIVE: JANUARY 1, 2018 JCB 300T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGES
PART NUMBER
Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter
All prices and specifications subject to change without notice Page 170 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Snow Removal Attachments
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U651 84" Snow Blade - Manual Angle 332/X4348 $2,132
881U652 96" Snow Blade - Manual Angle 332/X4349 $2,157
881U653 72" Snow Blade - Hydraulic Angle 980/A7456 $2,646
881U654 84" Snow Blade - Hydraulic Angle 332/X4350 $2,696
881U655 96" Snow Blade - Hydraulic Angle 332/X4351 $2,747
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/X4352 $4,630
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $4,681
881U658 120" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,775
881U535 60" Snow Blower - Standard Flow 332/L3932 $8,597
881U663 72" Snow Blower - Standard Flow 333/L6154 $8,624
881U664 78" Snow Blower - Standard Flow 332/X4383 $8,649
881U665 84" Snow Blower - Standard Flow 332/X4384 $8,674
881U660 72" Snow Blower - High Flow 332/X4385 $9,809
881U661 78" Snow Blower - High Flow 332/X4399 $10,248
881U662 84" Snow Blower - High Flow 332/X4400 $13,861
881U670 72" Snow Push 332/X4401 $3,107
881U671 84" Snow Push 333/X6486 $3,400
881U672 96" Snow Push 333/X6487 $3,610
JCB 300T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
PART NUMBER
All prices and specifications subject to change without notice Page 171 of 217 JCB 300T Compact Tracked USD Price Page Iss 3
Index
2018
JCB SKID STEER LOADER
175 AGRINEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB
HYDRAULICS
LOADER
SERVICEABILITY
JCB 175 SKID STEER LOADER
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc, oil
immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically activated
through a switch on the instrument panel or by raising seat bar.
EFFECTIVE: JANUARY 1, 2018
1.9L (113.5CID) 56 SAE Gross hp, Kohler KDI 1903 TCR engine, centrifugal dry type dual stage air cleaner.
Fuel filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan. 110V Block
Heater comes as standard to aid engine starting in cold weather enviroment.
EH (Electro-Hydraulic) Controls with hydrostatic transmission. Selectable control pattern allows operator
to choose either ISO or Dual Hand Pattern controls. Travel Speeds of 0 to 7.5 mph in both forward and
reverse. Fitted as standard two (2) speed transmission delivering a high range of travel from 0 - 11.5 mph
as well as creep speed providing tunning of transmission speed from 1-99% of full speed for special
applications.
10 x 16.5 8 ply, Heavy Duty WIDE TRACK JCB Tires with twine cutter providing 63" width.
18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.
Rated Operating Capacity of 1750 lbs, Vertical Lift Loader Design provides vertical lift path and increased
reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic powered
attachments. Standard Powered Quick Hitch. Hydraulic Float standard, Parallel Lift in raise only and SRS
(smooth ride system) come as standard.
Cab tilts forward to provide further access to the hydraulic components. Rear door
provides class leading access to engine bay and daily maintenance and check points.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear, Reverse Alarm,
Horn, Radio and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic hand and foot throttle control.
SAE certified ROPS/FOPS, left side entry. Heated vinyl seat with seatbelt and operator
restraint interlock for drive and loader functions. The cab unit is pressurized and comes
with heat and A/C, sliding left window and full side door.
All prices and specifications subject to change without notice Page 174 of 217 JCB 175 Skid Steer USD Price Page Is 2
JCB 175 SKID STEER LOADER F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8602A 8602BSALES CAB CAB
CODE ITEM STD FLOW HIGH FLOW
8602 JCB 175 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width)
881B224
881C202
881C205
881D301
881E418 North American English Manual - for Cab machine
881F205 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)
881F206
881G287
881G291 Cab Wheeled Fender & Fuel Cap Protection
881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 215, 215T)
881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 215, 215T)
881G322
881H301 Bolt on Edge for 66" Bucket (1676mm)
SUGGESTED LIST PRICE $48,151 $49,888
U.S. DOLLAR
PRICE PAGES
AGRI Package Build - Wheeled (Includes: Radio, Heated Vinyl Suspension Seat, Block Heater, Twine Cutter, 2
Speed, Quickhitch, SRS, Foot Throttle, Parallel Lift, ISO & Dual Pattern Change Over)
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Mechanical Quickhitch - 3 CYL
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
GP Bucket - 66" - 14.1 cu-ft
Reversing Fan
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick
Option)
Select one of the following machine PACKAGE BUILD codes.
All prices and specifications subject to change without notice Page 175 of 217 JCB 175 Skid Steer USD Price Page Iss 2
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D347 GP Bucket - 60" - 12.7 cu-ft $1,119
881D301 GP Bucket - 66" - 14.1 cu-ft $1,145
881D340 GP Bucket - 68" - 14.3 cu-ft $1,262
881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,801
881D342 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,834
881D327 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,831
881D344 GP Bucket - 68" - 14.3 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,862
Landscape Buckets
881D349 Landscape Bucket - 60" - 15.8 cu-ft $1,196
881D305 Landscape Bucket - 66" - 17.5 cu-ft $1,221
881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,799
881D331 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,827
6 in 1 Buckets
881D365 6 In 1 Multipurpose Bucket - 60" - 12.2 cu-ft $3,480
881D309 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft $3,562
881D323 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,546
881D335 6 In 1 Multipurpose Bucket - 66" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,575
6 in 1 Buckets
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
BUCKET ACCESSORIES
881H320 Bolt on Edge for 60" Bucket (1524mm) $278
881H301 Bolt on Edge for 66" Bucket (1676mm) $298
881H325 Bolt on Edge for 68" Bucket (1727mm) $308
881H322 Tooth Bar for 60" Bucket - Over Bucket (1524mm) $619
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $763
881H326 Tooth Bar for 68" Bucket - Over Bucket (1727mm) $648
881H324 Tooth Bar for 60" Bucket - Over Bolt on Edge (1524mm) $687
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $692
881H327 Tooth Bar for 68" Bucket - Over Bolt on Edge (1727mm) $916
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
JCB 175 SKID STEER LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 176 of 217 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Snow Removal Attachments
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U659 72" Snow Blower - High Flow Small Platform Only 334/L2463 $9,809
881U670 72" Snow Push 333/X6486 $3,107
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
JCB 175 SKID STEER LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 177 of 217 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
JCB 175 SKID STEER LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 178 of 217 JCB 175 Skid Steer USD Price Page
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F206
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
JCB 175 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 179 of 217 JCB 175 Skid Steer USD Price Page
Index
2018
JCB SKID STEER LOADER
270 AGRINEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
TIRES: FRONT AND REAR
BRAKES
ELECTRICAL
INSTRUMENTS
CAB
HYDRAULICS
SERVICEABILITY
JCB 270 SKID STEER LOADER
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner; Fuel
filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan. 110V Block Heater
comes as standard to aid engine starting in cold weather enviroment.
EH (Electro-Hydraulic) Controls with hydrostatic transmission. Selectable control pattern allows
operator to choose either ISO or Dual Hand Pattern controls. Travel Speeds of 0 to 6.8 mph in both
forward and reverse. Fitted as standard two (2) speed transmission delivering a high range of travel from
0 - 12.4 mph as well as creep speed providing tunning of transmission speed from 1-99% of full speed for
special applications.
12 x 16.5 10 ply, Heavy Duty WIDE TRACK JCB Tires providing 72" width.
LOADER Rated Operating Capacity of 2600 lbs, Vertical Lift Loader Design provides vertical lift path and increased
reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic powered
attachments. Standard Powered Quick Hitch. Hydraulic Float standard, Parallel Lift in raise only and SRS
(smooth ride system) come as standard.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides class
leading access to engine bay and daily maintenance and check points.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc, oil
immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically activated
through a switch on the instrument panel or by raising seat bar.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear, Reverse
Alarm, Horn, Radio and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels. Standard electronic
hand and foot throttle.
SAE certified ROPS/FOPS, left side entry. Standard Cloth Air Suspension Seat with seatbelt and operator
restraint interlock for drive and loader functions. The cab unit is pressurized and comes with heat and
A/C, sliding left window and full side door.
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
All prices and specifications subject to change without notice Page 182 of 217 JCB 260 Skid Steer USD Price Page Iss 3
JCB 270 SKID STEER LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8606A 8606BSALES CAB CAB
CODE ITEM STD FLOW HIGH FLOW
8606 JCB 270 Wheeled, Vertical Lift, New Generation, Skid Steer Loader
881A302 12 x 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width)
881B329
881C311 JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
881C312
881D306 Landscape Bucket - 72" - 19.2 cu-ft
881E118 North American English Manual - for Cab machine
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F306
881G085 Reversing Fan - Global (Gear Pump)
881G120
881G094 Parallel Lift Vertical Lift Models - 270
881G088 Cab Wheeled Fender & Fuel Cap Protection
881H302 Bolt on Edge for 72" Bucket (1727mm)
SUGGESTED LIST PRICE $54,633 $56,554
Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and
Manual Lock Quickhitch
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
AGRI Package Build - Wheeled (Includes: Radio, Heated Vinyl Suspension Seat, Block Heater, Twine Cutter, 2
Speed, Quickhitch, Foot Throttle, ISO & Dual Pattern Change Over)
Select one of the following machine PACKAGE BUILD codes.
All prices and specifications subject to change without notice Page 183 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D302 GP Bucket - 72" - 15.4 cu-ft $1,221
881D341 GP Bucket - 75" - 15.8 cu-ft $1,399
881D303 GP Bucket - 78" - 16.7 cu-ft $1,603
881D304 GP Bucket - 84" - 18.1 cu-ft $1,679
881D316 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,889
881D343 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,940
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,990
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,390
881D328 GP Bucket - 72" - 15.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,919
881D345 GP Bucket - 75" - 15.8 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,969
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,018
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,419
Landscape Buckets
881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,310
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,709
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,866
881D320 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,904
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,005
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,277
881D332 Landscape Bucket - 72" - 19.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $2,933
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,034
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,307
6 in 1 Buckets
881D310 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft $3,837
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,371
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,934
881D324 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,837
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,403
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,001
881D336 6 In 1 Multipurpose Bucket - 72" - 17.2 cu-ft with Pallet Fork Frame, LBR, 48" Tines $5,866
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,433
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,031
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
JCB 270 SKID STEER LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 184 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKET ACCESSORIES INDEX
881H301 Bolt on Edge for 66" Bucket (1676mm) $298
881H325 Bolt on Edge for 68" Bucket (1727mm) $308
881H302 Bolt on Edge for 72" Bucket (1727mm) $318
881H316 Bolt on Edge for 75" Bucket (1905mm) $327
881H334 Bolt on Edge for 76" Scrap Grapple $736
881H303 Bolt on Edge for 78" Bucket (1829mm) $336
881H335 Bolt on Edge for 82" Scrap Grapple $807
881H304 Bolt on Edge for 84" Bucket (1981mm) $372
881H328 Bolt on Edge for 96" Snow Bucket (2438mm) $499
881H330 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) $446
881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $763
881H326 Tooth Bar for 68" Bucket - Over Bucket (1727mm) $648
881H306 Tooth Bar for 72" Bucket - Over Bucket (1727mm) $664
881H317 Tooth Bar for 75" bucket - Over Bucket (1905mm) $675
881H307 Tooth Bar for 78" Bucket - Over Bucket (1829mm) $687
881H308 Tooth Bar for 84" Bucket - Over Bucket (1981mm) $712
881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $692
881H327 Tooth Bar for 68" Bucket - Over Bolt on Edge (1727mm) $916
881H310 Tooth Bar for 72" Bucket - Over Bolt on Edge (1727mm) $926
881H318 Tooth Bar for 75" bucket - Over Bolt on Edge (1905mm) $936
881H311 Tooth Bar for 78" Bucket - Over Bolt on Edge (1829mm) $977
881H312 Tooth Bar for 84" Bucket - Over Bolt on Edge (1981mm) $956
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
JCB 270 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 185 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $2,239
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,900
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,644
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U249 84" Pick-Up Sweeper 334/P2839 $7,403
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,919
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,379
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
881U352 HM386Q (includes Chisel & Moil) - *980/68700 Mounting Bracket required* 980/A3483 $12,109
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,861
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
881U401 Planetary Drive Auger - High Flow - (includes mounting bracket & hoses) 332/L3979 $5,645
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
JCB 270 SKID STEER LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 186 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $480
881U459 9" X 4' Heavy Duty Auger 2" Hex 980/A2031 $647
881U460 12" X 4' Heavy Duty Auger 2" Hex 980/A2032 $735
881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex 980/A2035 $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex 980/A2037 $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex 980/A2038 $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex 980/A2039 $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7257 $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7267 $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" 980/L7271 $171
881U471 Hex. Drive Extension - 18" 980/L7272 $252
881U472 Hex. Drive Extension - 24" 980/L7273 $334
Landscape Development Tools
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $11,854
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,993
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,245
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $10,013
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,383
881U508 66" Auto Rake - Standard Flow 332/L7253 $10,481
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,633
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U510 66" Tiller - 6 inch tines - High Flow 332/X4380 $6,309
881U511 78" Tiller - 6 inch tines - High Flow 332/X4381 $6,624
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,896
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,736
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,684
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $11,015
Forestry Cutters
881U516 60" Forestry Cutting Head - High Flow 334/L8351 $32,580
JCB 270 SKID STEER LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
PART NUMBER
All prices and specifications subject to change without notice Page 187 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306.
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,083
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,522
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,162
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
881U522 48" Trencher with 6" wide chain, crumber and hoses - High Flow 332/X4290 $7,625
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
881U524 72" Brush Cutter - High Flow 333/X4409 $7,365
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4301 $23,722
881U610 40" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4302 $27,875
Saws
881U611 Rock Saw - 18" Depth - High Flow 332/L7244 $20,302
Snow Removal Attachments
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U651 84" Snow Blade - Manual Angle 332/X4348 $2,132
881U654 84" Snow Blade - Hydraulic Angle 332/X4351 $2,696
881U652 96" Snow Blade - Manual Angle 332/X4349 $2,157
881U655 96" Snow Blade - Hydraulic Angle 332/X4352 $2,747
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U660 72" Snow Blower - High Flow 332/X4399 $9,809
881U664 78" Snow Blower - Standard Flow 332/X4384 $8,649
881U661 78" Snow Blower - High Flow 332/X4400 $10,248
881U665 84" Snow Blower - Standard Flow 332/X4385 $8,674
881U662 84" Snow Blower - High Flow 332/X4401 $13,861
881U670 72" Snow Push 333/X6486 $3,107
881U671 84" Snow Push 333/X6487 $3,400
JCB 270 SKID STEER LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 188 of 217 JCB 260 Skid Steer USD Price Page Iss 3
Index
2018
JCB SKID STEER LOADER
270T AGRINEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB
HYDRAULICS
SERVICEABILITY
24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.
LOADER Rated Operating Capacity of 2600 lbs, Vertical Lift Loader Design provides vertical lift path and increased
reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic powered
attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic Float standard on
all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride system), left hand auxiliary
pipework.
Cab tilts forward to provide further access to the hydraulic components. Rear door provides access to
engine bay and daily maintenance and check points.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc, oil
immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically activated
through a switch on the instrument panel or by raising seat bar
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels. Standard electronic
throttle control with optional foot throttle.
SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat with seatbelt and operator
restraint interlock for drive and loader functions. Cab units are pressurized and available with heat or
heat and A/C, sliding left window and full side door. Right Hand glass standard on canopy and cab builds.
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner. Fuel
filter with water separator, 1000 CCA battery; variable speed hydraulically driven fan.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 5.7 mph in both
forward and reverse. Standard Creep speed provides operation from 0 to 1/2 of full speed for special
applications. Two (2) speed transmission is available providing a low range of 0 - 4.8 mph and a high range
of 0 - 7.8 mph
Fitted with 17.7" wide tracks provide a machine width of 78" and a ground bearing pressure of 4.6 psi.
JCB 270T COMPACT TRACK LOADER
All prices and specifications subject to change without notice Page 191 of 217 JCB 260 Skid Steer USD Price Page Iss 3
JCB 270T COMPACT TRACK LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8614A 8614BSALES CAB CAB
CODE ITEM STD FLOW HIGH FLOW
8614 JCB 270T Tracked, Vertical Lift, New Generation, Compact Tracked Loader
881A322 17.7" (450 mm) Wide Solideal Rubber Tracks - provides an overall Machine width of 78"
881C311
881C312
881D303
881E118 North American English Manual - for Cab machine
881F305 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)
881F306
881G085 Reversing Fan - Global (Gear Pump)
881G097
881G101 Cab Tracked Fender & Fuel Cap Protection
881G121
881G303 Laminate Glass to replace tempered as standard on cab builds
SUGGESTED LIST PRICE $69,692 $71,411
AGRI Package Build - Tracked (Includes: Radio, Heated Vinyl Suspension Seat, Block Heater 2 Speed,
Quickhitch, Foot Throttle, ISO & Dual Pattern Change Over)
JCB EH Controls - 3 way Joysticks with Auxiliary Hydraulics
GP Bucket - 78" - 16.7 cu-ft
Parallel Lift Vertical Lift Model - 270T
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required
with High Flow Hydraulics
High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option
881C312)
Select one of the following machine PACKAGE BUILD codes.
All prices and specifications subject to change without notice Page 192 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKETS (E) pick one - see H codes for bucket accessories INDEX
GP Buckets
881D303 GP Bucket - 78" - 16.7 cu-ft $1,603
881D304 GP Bucket - 84" - 18.1 cu-ft $1,679
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,990
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,390
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,018
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,419
Landscape Buckets
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,709
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,866
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,005
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,277
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,034
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,307
6 in 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,371
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,934
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,403
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,001
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,433
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,031
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
JCB 270T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 193 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
BUCKET ACCESSORIES INDEX
881H316 Bolt on Edge for 75" Bucket (1905mm) $327
881H334 Bolt on Edge for 76" Scrap Grapple $736
881H303 Bolt on Edge for 78" Bucket (1829mm) $336
881H335 Bolt on Edge for 82" Scrap Grapple $807
881H304 Bolt on Edge for 84" Bucket (1981mm) $372
881H328 Bolt on Edge for 96" Snow Bucket (2438mm) $499
881H329 Bolt on Edge for 108" Snow Bucket (2743mm) $519
881H330 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) $446
881H317 Tooth Bar for 75" bucket - Over Bucket (1905mm) $675
881H307 Tooth Bar for 78" Bucket - Over Bucket (1829mm) $687
881H308 Tooth Bar for 84" Bucket - Over Bucket (1981mm) $712
881H318 Tooth Bar for 75" bucket - Over Bolt on Edge (1905mm) $936
881H311 Tooth Bar for 78" Bucket - Over Bolt on Edge (1829mm) $977
881H312 Tooth Bar for 84" Bucket - Over Bolt on Edge (1981mm) $956
881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $132
881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,764
881H315 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines $1,792
JCB 270T COMPACT TRACK LOADERU.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 194 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
High Capacity / Light Material Buckets
881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,214
881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $2,239
881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $2,289
881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,340
Snow Buckets
881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,882
881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity 322/X2453 $1,760
881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $2,890
881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity 332/X4312 $2,900
881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $3,004
881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity 332/X4314 $3,027
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $736
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,644
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,965
881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $5,079
881U212 66" Heavy Duty Scrap Grapple (solid floor) 333/L1109 $5,287
881U203 76" Heavy Duty Scrap Grapple (solid floor) 332/L4036 $5,579
881U204 82" Heavy Duty Scrap Grapple (solid floor) 332/L4039 $5,596
Hydraulic Brooms/Sweepers
881U247 60" Pick-Up Sweeper 334/P2834 $6,599
881U248 72" Pick-Up Sweeper 334/P2836 $6,894
881U249 84" Pick-Up Sweeper 334/P2839 $7,403
881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $6,410
881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,919
881U301 Angle broom - 84" with manual angle adjustment link 332/L4027 $7,379
881U302 Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks) 332/L3983 $1,382
Hammers
881U354 HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required* 980/A7456 $8,954
881U351 Mounting Plate - Required for HM266Q Hammer 980/28400 $981
881U352 HM386Q (includes Chisel & Moil) - *980/68700 Mounting Bracket required* 980/A3483 $12,109
881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,861
Auger Drive Units
881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $3,022
881U401 Planetary Drive Auger - High Flow - (includes mounting bracket & hoses) 332/L3979 $5,645
Auger Bits - Standard Duty
881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $260
881U451 9" X 4' Standard Auger 2" Hex 980/A2021 $431
881U452 12" X 4' Standard Auger 2" Hex 980/A2023 $472
881U453 15" X 4' Standard Auger 2" Hex 980/A2025 $587
881U454 18" X 4' Standard Auger 2" Hex 980/A2027 $673
881U455 24" X 4' Standard Auger 2" Hex 980/A2028 $770
881U456 30" X 4' Standard Auger 2" Hex 980/A2029 $1,003
881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,218
JCB 270T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
All prices and specifications subject to change without notice Page 195 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Auger Bits - Heavy Duty
881U458 6" X 4' Heavy Duty Auger 2" Hex $480
881U459 9" X 4' Heavy Duty Auger 2" Hex $647
881U460 12" X 4' Heavy Duty Auger 2" Hex $735
881U461 15" X 4' Heavy Duty Auger 2" Hex $1,085
881U462 18" X 4' Heavy Duty Auger 2" Hex $1,116
881U463 24" X 4' Heavy Duty Auger 2" Hex $1,468
881U464 30" X 4' Heavy Duty Auger 2" Hex $1,917
881U465 36" X 4' Heavy Duty Auger 2" Hex $2,349
Auger Bits - Tree & Shrub
881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex $636
881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex $710
881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex $1,741
881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex $1,750
Auger Extensions
881U470 Hex. Drive Extension - 12" $171
881U471 Hex. Drive Extension - 18" $252
881U472 Hex. Drive Extension - 24" $334
Landscape Development Tools
881U473 60" Landscape Power Rake with Manual Angle $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle $11,788
881U500 72" Landscape Power Rake with Manual Angle $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle $11,854
881U502 84" Landscape Power Rake with Manual Angle $13,993
881U503 84" Landscape Power Rake with Hydraulic Angle $14,245
881U504 90" Landscape Power Rake with Manual Angle $14,093
881U505 90" Landscape Power Rake with Hydraulic Angle $14,541
881U506 66' Landscape Preparator - Standard Flow $10,013
881U507 76" Landscape Preparator - Standard Flow $13,383
881U509 76" Auto Rake - Standard Flow $10,633
881U526 52" Tiller - 6 inch tines - Standard Flow $6,088
881U511 78" Tiller - 6 inch tines - High Flow $6,624
881U527 66" Vibratory Roller - Smooth Drum $9,896
881U512 73" Vibratory Roller - Smooth Drum $10,684
881U513 84" Vibratory Roller - Smooth Drum $10,790
881U528 66" Vibratory Roller - Padded Drum $10,736
881U514 73" Vibratory Roller - Padded Drum $11,015
881U515 84" Vibratory Roller - Padded Drum $11,575
Forestry Cutters
881U516 60" Forestry Cutting Head - High Flow $32,580334/L8351
332/X4709
332/X4281
332/X4282
332/X4710
332/X4283
332/X4284
332/X4381
333/L6126
332/L3939
332/L3947
332/L7237
332/L3951
332/L7247
332/L7248
332/L7252
332/L3954
332/L3960
333/L8191
980/L7271
980/L7272
980/L7273
333/L6180
980/A2039
980/L7251
980/L7257
980/L7267
980/L7270
980/A2038
JCB 270T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
PART NUMBER
980/A3001
980/A2031
980/A2032
980/A2034
980/A2035
980/A2037
All prices and specifications subject to change without notice Page 196 of 217 JCB 260 Skid Steer USD Price Page Iss 3
F.O.B.
SAVANNAH, GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306.
INDEX
ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,769
881U519 96" Dozer Blade - 6 Way Hydraulic 332/X4287 $7,771
Agricultural Attachments
881U530 60" Manure Forks with Top Grapple 333/L6079 $2,466
881U531 66" Manure Forks with Top Grapple 333/L6106 $3,727
881U550 72" Manure Forks with Top Grapple 332/L3869 $4,083
881U551 84" Manure Forks with Top Grapple 332/L3879 $4,522
881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,162
881U532 Bale Spear 333/L5627 $835
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
881U522 48" Trencher with 6" wide chain, crumber and hoses - High Flow 332/X4290 $7,625
Brush Cutters
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
881U524 72" Brush Cutter - High Flow 333/X4409 $7,365
881U525 78' Brush Cutter - High Flow 333/X4383 $7,701
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
Tree Spades
881U602 Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter 332/X4296 $11,154
881U603 Tree Spade with Blades / 25 degree cutting angle / 24" - 36" ball diameter 332/X4297 $14,042
881U604 Tree Spade with Blades / 25 degree cutting angle / 32" - 44" ball diameter 332/X4298 $14,549
Cold Planers
881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,905
881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4299 $21,389
881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4300 $21,682
881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/L7272 $21,788
881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4301 $23,722
881U610 40" Cold Planer - Hyd. Side Shift / Tilt / Depth - High Flow 332/X4302 $27,875
Saws
881U611 Rock Saw - 18" Depth - High Flow 332/L7244 $20,302
881U612 Rock Saw - 24" Depth - High Flow 332/L7269 $22,524
Snow Removal Attachments
881U533 60" Snow Blade - Manual Angle 333/L8499 $2,101
881U650 72" Snow Blade - Manual Angle 332/X4347 $2,116
881U651 84" Snow Blade - Manual Angle 332/X4348 $2,132
881U652 96" Snow Blade - Manual Angle 332/X4349 $2,157
881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,595
881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,646
881U654 84" Snow Blade - Hydraulic Angle 332/X4351 $2,696
881U655 96" Snow Blade - Hydraulic Angle 332/X4352 $2,747
881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $4,630
881U657 108" Heavy Duty Snow Blade - Hydraulic Angle 332/L3927 $4,681
881U658 120" Heavy Duty Snow Blade - Hydraulic Angle 332/L3932 $4,775
881U535 60" Snow Blower - Standard Flow 333/L6154 $8,597
881U663 72" Snow Blower - Standard Flow 332/X4383 $8,624
881U664 78" Snow Blower - Standard Flow 332/X4384 $8,649
881U665 84" Snow Blower - Standard Flow 332/X4385 $8,674
881U660 72" Snow Blower - High Flow 332/X4399 $9,809
881U661 78" Snow Blower - High Flow 332/X4400 $10,248
881U662 84" Snow Blower - High Flow 332/X4401 $13,861
881U670 72" Snow Push 333/X6486 $3,107
881U671 84" Snow Push 333/X6487 $3,400
881U672 96" Snow Push 333/X6488 $3,610
JCB 270T COMPACT TRACK LOADER EFFECTIVE: JANUARY 1, 2018U.S. DOLLAR PRICE PAGES
All prices and specifications subject to change without notice Page 197 of 217 JCB 260 Skid Steer USD Price Page Iss 3
Index
2018
JCB COMPACT TRACK LOADER
325TFORESTMASTER
NEW GENERATION
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
F.O.B.
SAVANNAH,
GA
STANDARD EQUIPMENT INDEX
ENGINE
TRANSMISSION
RUBBER TRACKS
BRAKES
ELECTRICAL
INSTRUMENTS
CAB OR CANOPY
HYDRAULICS
LOADER
RECOVERY WINCH
SERVICEABILITY
JCB 325T FOREST MASTER U.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage
air cleaner. Fuel filter with water separator, 1000 CCA battery; variable speed
hydraulically driven fan.
EH (Electo-Hydraulic) Controls with hydrostatic transmission. Travel Speeds of 0 to 5.7 mph in both
forward and reverse. Standard Creep speed provides operation from 0 to 1/2 of full speed for special
applications. An optional two (2) speed transmission is available providing a low range of 0 - 4.8 mph
and a high range of 0 - 7.8 mph
Cab tilts forward to provide further access to the hydraulic components. Rear door provides access
to engine bay and daily maintenance and check points.
SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat with
seatbelt and operator restraint interlock for drive and loader functions. Cab units
are pressurized and available with heat or heat and A/C, sliding left window and full
side door. Right Hand glass standard on canopy and cab builds.
Fitted with 17.7" wide tracks provide a machine width of 78" and a ground bearing pressure of 4.8 psi.
33gpm @ 3335psi.
Rated Operating Capacity of 3250 lbs, Vertical Lift Loader design provides vertical lift path and
increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic
powered attachments. Standard Mechanical Quick Hitch. Hydraulic Float standard on all models.
Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,
oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically
activated through a switch on the instrument panel or by raising seat bar.
Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,
Reverse Alarm, Horn, and 12V Accessory Socket.
Audible and visual warning systems, right and left side mounted instrument panels.
Standard electronic throttle control with optional foot throttle.
6.0 cubic - inch motor with a pulling capacity up to 15,000 lbf. Hardened steel two-stage planetary
geardrive with 36:1 reduction providing a top line speed of 27.3 feet per minute. 75 feet of 1/2"
diameter wire cable. Unit swings out for access to daily service checks.
(NOTE - Recovery winch 881G111 must be included when 325T Forestmaster 8668 is
ordered)
All prices and specifications subject to change without notice Page 200 of 217 JCB 325T FORESTMASTER Compact Tracked USD Price Page Iss 3
EFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD INDEX
PACKAGE BUILD CODE: 8668ASALES CAB
CODE ITEM HIGH FLOW
8668 JCB 325T FORESTMASTER Tracked, Vertical Lift, New Generation, Compact Tracked Loader
881E118 North American English Manual - for Cab machine
881A322 17.7" (450 mm) Wide Solideal Rubber Tracks - provides an overall Machine width of 78"
881B360
881C312
881D304 GP Bucket - 84" - 18.1 cu-ft
881F311
881G022 Radio with Speakers and Aerial
881G025 Engine Block Heater - 110V
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option
881G051
881G074 2 Speed - Tracked Machines
881G082 Reversing Fan
881G084 Foot Throttle
881G101 Cab Tracked Fender & Fuel Cap Protection
881G109 Cooling Pack Guard
881G110 Front Work Light Protection - FOPS Required - Not Compatible with Roadlights
881G111 Winch, Protection Kit, Front Skirt. *** NOTE: Must be ordered with 325T Forestmaster Code 8668 ***
881G112 Auxiliary Guard
881G113 A/C FOPS Guard with Side Protection - FOPS Required
881G114 Track Tube Guard
881G116 Front ¾" Lexan with front mesh guard
SUGGESTED LIST PRICE $105,767
Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide
protection over laminated cab glass.
Enclosed Cab Package - FORESTMASTER ONLY - includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float
and Manual Lock Quickhitch
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with High Flow
Hydraulics
High Flow Hydraulics - FORESTMASTER ONLY - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick
option 881C312)
U.S. DOLLAR
PRICE PAGES JCB 325T FOREST MASTER
F.O.B.
SAVANNAH, GA
Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page
does not meet your requirements, please order a machine using the Custom Build Sections following.
All prices and specifications subject to change without notice Page 201 of 217 JCB 325T FORESTMASTER Compact Tracked USD Price Page Iss 3
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
U.S. LIST
BASE MACHINE (E) INDEX
8668 JCB 325T FORESTMASTER Tracked, Vertical Lift, New Generation, Compact Tracked Loader $65,029
TRACKS (E)
881A322 17.7" (450 mm) Wide Solideal Rubber Tracks - provides an overall Machine width of 78" $868
OPERATOR ENCLOSURES (E) pick one
881B360 $5,019
MACHINE CONTROLS (E)
881C312 $1,746
BUCKETS (E) pick one - see H codes for bucket accessories
GP Buckets
881D303 GP Bucket - 78" - 16.7 cu-ft $1,603
881D304 GP Bucket - 84" - 18.1 cu-ft $1,679
881D317 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,990
881D318 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,390
881D329 GP Bucket - 78" - 16.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,018
881D330 GP Bucket - 84" - 18.1 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,419
Landscape Buckets
881D307 Landscape Bucket - 78" - 20.9 cu-ft $1,709
881D308 Landscape Bucket - 84" - 22.7 cu-ft $1,866
881D321 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,005
881D322 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $3,277
881D333 Landscape Bucket - 78" - 20.9 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,034
881D334 Landscape Bucket - 84" - 22.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $3,307
6 in 1 Buckets
881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,371
881D312 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft $4,934
881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $6,403
881D326 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 42" Tines $7,001
881D337 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 48" Tines $6,433
881D338 6 In 1 Multipurpose Bucket - 84" - 23.4 cu-ft with Pallet Fork Frame, LBR, 48" Tines $7,031
Pallet Forks
881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines (Heavy Duty 6,000lb lift capacity) $1,661
881D314 Pallet Fork Frame, Load Backrest (LBR) With 48" Tines (Heavy Duty 6,000lb lift capacity) $1,374
Enclosed Cab Package - FORESTMASTER ONLY - includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader
Arm Float and Manual Lock Quickhitch
JCB 325T FOREST MASTER EFFECTIVE: JANUARY 1, 2018
JCB EH Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required with
High Flow Hydraulics
To complete a machine order, select one code from each E (Essential) feature category below.
Select Options and Attachments as required.
All prices and specifications subject to change without notice Page 202 of 217 JCB 325T FORESTMASTER Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
OPERATOR HANDBOOKS (E) pick one INDEX
881E117 Spanish Export (American) Manual $0
881E118 North American English Manual - for Cab machine $0
881E120 French/Canadian Manual $0
HYDRAULIC SYSTEMS (E)
881F311 $1,331
MACHINE OPTIONS (do not need to order if included in operator enclosure packages)
Electrical Options
881G025 Engine Block Heater - 110V $146
881G031 Rotating Beacon and Socket $152
881G096 ISO & Dual Hand Control Pattern Changeover $166
Hydraulic Options
881G021 Biodegradable Oils $329
Operators Compartment Options
881G084 Foot Throttle $220
881G011 Key Start/ Key Immobilizer- All machine configurations $435
881G091 Vinyl Air Suspension Seat $666
881G019 Cloth Air Suspension Seat $752
881G020 3 inch Seatbelt $64
881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $289
881G050 2 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $192
881G022 Radio with Speakers and Aerial $324
Other Options
881G074 2 Speed - Tracked Machines $1,639
881G092 Spark Arrestor Muffler $260
881G083 Tool Kit - Basic $348
881G098 Tool Kit - Full $516
881G082 Reversing Fan $908
881G090 External Engine Hourmeter $146
High Flow Hydraulics - FORESTMASTER ONLY - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-
Function Joystick option 881C312)
JCB 325T FOREST MASTER U.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 203 of 217 JCB 325T FORESTMASTER Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
U.S. LIST
MACHINE OPTIONS (do not need to order if included in operator enclosure packages) INDEX
Impact Protection/Guards
881G051 Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass.$2,464
881G101 Cab Tracked Fender & Fuel Cap Protection $130
881G109 Cooling Pack Guard $812
881G110 Front Work Light Protection - FOPS Required - Not Compatible with Roadlights $285
881G111 Winch, Protection Kit, Front Skirt. *** NOTE: Must be ordered with 325T Forestmaster Code 8668 *** $18,867
881G112 Auxiliary Guard $339
881G113 A/C FOPS Guard with Side Protection - FOPS Required $1,297
881G114 Track Tube Guard $441
881G116 Front ¾" Lexan with front mesh guard $2,032
881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,829
BUCKET ACCESSORIES
881H303 Bolt on Edge for 78" Bucket (1829mm) $336
881H335 Bolt on Edge for 82" Scrap Grapple $807
881H304 Bolt on Edge for 84" Bucket (1981mm) $372
881H328 Bolt on Edge for 96" Snow Bucket (2438mm) $499
881H329 Bolt on Edge for 108" Snow Bucket (2743mm) $519
881H307 Tooth Bar for 78" Bucket - Over Bucket (1829mm) $687
881H308 Tooth Bar for 84" Bucket - Over Bucket (1981mm) $712
881H311 Tooth Bar for 78" Bucket - Over Bolt on Edge (1829mm) $977
881H312 Tooth Bar for 84" Bucket - Over Bolt on Edge (1981mm) $956
JCB 325T FOREST MASTER U.S. DOLLAR
PRICE PAGESEFFECTIVE: JANUARY 1, 2018
Select Optional Equipment as desired within limitations (if indicated).
All prices and specifications subject to change without notice Page 204 of 217 JCB 325T FORESTMASTER Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Grapple Attachments
881U209 60" Heavy Duty Brush Grapple 333/L5021 $5,190
881U210 66" Heavy Duty Brush Grapple 333/L5022 $5,403
881U200 72" Heavy Duty Brush Grapple 332/L4030 $5,495
881U201 78" Heavy Duty Brush Grapple 332/L4033 $5,644
881U202 84" Heavy Duty Brush Grapple 332/L4035 $5,965
Landscape Development Tools
881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $10,556
881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $11,788
881U500 72" Landscape Power Rake with Manual Angle 332/L3939 $11,254
881U501 72" Landscape Power Rake with Hydraulic Angle 332/L3947 $11,854
881U502 84" Landscape Power Rake with Manual Angle 332/L7237 $13,993
881U503 84" Landscape Power Rake with Hydraulic Angle 332/L3951 $14,245
881U504 90" Landscape Power Rake with Manual Angle 332/L7247 $14,093
881U505 90" Landscape Power Rake with Hydraulic Angle 332/L7248 $14,541
881U506 66' Landscape Preparator - Standard Flow 332/L7252 $10,013
881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,383
881U509 76" Auto Rake - Standard Flow 332/L3960 $10,633
881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $6,088
881U511 78" Tiller - 6 inch tines - High Flow 332/X4381 $6,624
881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,896
881U512 73" Vibratory Roller - Smooth Drum 332/X4281 $10,684
881U513 84" Vibratory Roller - Smooth Drum 332/X4282 $10,790
881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,736
881U514 73" Vibratory Roller - Padded Drum 332/X4283 $11,015
881U515 84" Vibratory Roller - Padded Drum 332/X4284 $11,575
JCB 325T FOREST MASTER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
PART NUMBER
All prices and specifications subject to change without notice Page 205 of 217 JCB 325T FORESTMASTER Compact Tracked USD Price Page Iss 3
F.O.B.
SAVANNAH,
GA
NOTE: Machine width is dependent on tire/track specification
Confirm overall machine width with specific tires/tracks for correct bucket or attachment sizing
Attachments designated as High Flow require Essential code 881F306, 881F308 or 881F310
INDEX
ADDITIONAL MACHINE ATTACHMENTS U.S. LIST
Forestry Cutters
881U516 60" Forestry Cutting Head - High Flow 334/L8351 $32,580
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,769
881U519 96" Dozer Blade - 6 Way Hydraulic 332/X4287 $7,771
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
881U522 48" Trencher with 6" wide chain, crumber and hoses - High Flow 332/X4290 $7,625
Dozer Blades
881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,769
881U519 96" Dozer Blade - 6 Way Hydraulic 332/X4287 $7,771
Trenchers
881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,986
881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/L7251 $5,242
881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,755
881U522 48" Trencher with 6" wide chain, crumber and hoses - High Flow 332/X4290 $7,625
Brush Cutter $0
881U523 72" Brush Cutter - Standard Flow 333/X5231 $7,219
881U524 72" Brush Cutter - High Flow 333/X4409 $7,365
881U525 78' Brush Cutter - High Flow 333/X4383 $7,701
Stump Grinders
881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,496
881U601 Stump Grinder - 30" Wheel Diameter / High Flow 332/X4295 $9,685
JCB 325T FOREST MASTER U.S. DOLLAR PRICE PAGES EFFECTIVE: JANUARY 1, 2018
PART NUMBER
All prices and specifications subject to change without notice Page 206 of 217 JCB 325T FORESTMASTER Compact Tracked USD Price Page Iss 3
Index
2018
DEALER FIT:
1. ATTACHMENTS
FOR
JCB SKID STEER andCOMPACT TRACK
LOADERS
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
NEW GENERATION SKID STEER & COMPACT TRACK LOADER DEALER FIT PRICE PAGE 1 INDEX
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required. W
eigh
t (lb
s)
155
175
210
215
250
270
300
330
150T
210T
215T
250T
270T
300T LIST
333/L8800 881D346 54" Dirt/GP Bucket / 12.5 cu. ft. Capacity DB54 NO 300 * * * * * * * * * * * * * * $1,097
333/L8803 881D347 60" Dirt/GP Bucket / 12.7 cu. ft. Capacity DB60 NO 322 * * * * * * * * * * * * * * $1,122
332/X3184 881D301 66" Dirt/GP Bucket / 14.1 cu. ft. Capacity DB66 NO 440 * * * * * * * * * * * * * * $1,148
333/L4683 881D340 68" Dirt/GP Bucket / 14.3 cu. ft. Capacity DB68 NO 451 * * * * * * * * * * * * * * $1,265
332/L1798 881D302 72" Dirt/GP Bucket / 15.4 cu. ft. Capacity DB72 NO 473 * * * * * * * * * * $1,224
333/L4684 881D341 75" Dirt/GP Bucket / 16.4 cu ft. Capacity DP75 NO 520 * * * * * * * $1,403
332/X3180 881D303 78" Dirt/GP Bucket / 16.7 cu. ft. Capacity DB78 NO 543 * * * * * * * $1,607
332/L1825 881D304 84" Dirt/GP Bucket / 18.1 cu. ft. Capacity DB84 NO 576 * * * * * $1,683
333/L8820 881D348 54" Landscape Bucket / 14.2 cu. ft. Capacity LSB54 NO 327 * * * * * * * * * * * * * * $1,160
333/L8821 881D349 60" Landscape Bucket / 15.8 cu. ft. Capacity LSB60 NO 352 * * * * * * * * * * * * * * $1,199
332/L1826 881D305 66" Landscape Bucket / 17.5 cu. ft. Capacity LSB66 NO 500 * * * * * * * * * * * * * * $1,224
332/L1827 881D306 72" Landscape Bucket / 19.2 cu. ft. Capacity LSB72 NO 533 * * * * * * * * * * $1,313
332/L1828 881D307 78" Landscape Bucket / 20.9 cu. ft. Capacity LSB78 NO 608 * * * * * * * $1,714
332/X3214 881D308 84" Landscape Bucket / 22.7 cu. ft. Capacity LSB84 NO 641 * * * * * $1,871
332/L1829 881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity LMB75 NO 633 * * * * * * * * * * * * $2,220
332/L1830 881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity LMB84 NO 749 * * * * * * $2,244
332/L1831 881U69284" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity
HCB84 NO 740 * * * * * $2,295
332/L1834 881U69396" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity
HCB96 NO 880 * * * * * $2,346
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required. W
eigh
t (lb
s)
155
175
190
205
225
260
300
330
150T
190T
205T
225T
260T
300T LIST
332/X2435 881U536 54" Medium Duty Snow Bucket / 25.7 cu ft. Capacity MSB54 NO 545 * * * * * * * * * * * * * * $1,887
332/X2453 881U537 66" Medium Duty Snow Bucket / 24.1 cu. ft. capacity MSB66 NO 620 * * * * * * * * * * * * * * $2,888
332/X4311 881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity MSB84 NO 733 * * * * * * * * * * $2,897
332/X4312 881U681 96" Medium Duty Snow Bucket / 35.4 cu. ft. Capacity MSB96 NO 795 * * * * * * * $2,907
332/X4313 881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity HSB96 NO 999 * * * * * $3,011
332/X4314 881U683 108" Heavy Duty Snow Bucket / 55.9 cu. ft. Capacity HSB108 NO 1058 * * * * * $3,035
333/L9488 881D365 60" - 4 in 1 Multipurpose Bucket / 12.2 cu. ft. Capacity MPB60 NO 447 * * * * * * * * * * * * * * $3,488
332/X4315 881D309 66" - 6 in 1 Multipurpose Bucket / 15.8 cu. ft. Capacity MPB66 NO 630 * * * * * * * * * * * * * * $3,571
332/L3338 881D310 72" - 6 in 1 Multipurpose Bucket / 17.2 cu. ft. Capacity MPB72 NO 665 * * * * * * * * * * $3,846
332/L3339 881D311 78" - 6 in 1 Multipurpose Bucket / 21.7 cu. ft. Capacity MPB78 NO 945 * * * * * * * $4,382
332/L3340 881D312 84" - 6 in 1 Multipurpose Bucket / 23.4 cu. ft. Capacity MPB84 NO 1040 * * * * * $4,946
334/L3087 881H319 Bolt on Edge for 54" bucket NO 88 * * * * * * * * * * * * * * $259
334/L3084 881H320 Bolt on Edge for 60" bucket NO 99 * * * * * * * * * * * * * * $278
332/L3514 881H301 Bolt on Edge for 66" bucket NO 107 * * * * * * * * * * * * * * $299
334/L1845 881H325 Bolt on Edge for 68" bucket NO 108 * * * * * * * * * * * * * * $309
332/L3516 881H302 Bolt on Edge for 72" bucket NO 118 * * * * * * * * * * $318
334/L1864 881H316 Bolt on Edge for 75" bucket NO 121 * * * * * * * * * * * * $327
334/L7904 881U213 Bolt on Edge for 76" Scrap Grapple NO 121 * * * * * * * * * * $737
332/L3518 881H303 Bolt on Edge for 78" bucket NO 128 * * * * * * * $337
334/L7905 881U214 Bolt on Edge for 82" Scrap Grapple NO 132 * * * * * $809
332/L3519 881H304 Bolt on Edge for 84" bucket NO 137 * * * * * $373
334/L5920 881U215 Bolt on Edge for 96" Snow Bucket NO 154 * * * * * * * $500
334/L5921 881U216 Bolt on Edge for 108" Snow Bucket NO 174 * * * * * $520
334/L5922 881U217 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets NO 154 * * * * * $447
CONTINUED OVER
BUCKETS - SNOW
BUCKETS - 6 IN 1 MULTIPURPOSE
BUCKET ACCESSORIES
NOTE: MACHINE WIDTH IS DEPENDENT ON TIRE OR TRACK SPECIFICATION. CONFIRM OVERALL MACHINE WIDTH WITH SPECIFIC TIRES OR TRACKS FOR CORRECT BUCKET SIZING.
1. ATTACHMENTS - 1
BUCKETS - DIRT / GENERAL PURPOSE
BUCKETS - LANDSCAPE
BUCKETS - HIGH CAPACITY / LIGHT MATERIAL
All prices and specifications subject to change without notice 208 of 217 New Generation SSL and CTL Dealer Fit USD Price Pages Effective February 1, 2015
NEW GENERATION SKID STEER & COMPACT TRACK LOADER DEALER FIT PRICE PAGE 2 INDEX
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Weight (lbs) 15
5
175
210
215
250
270
300
330
150T
210T
215T
250T
270T
300T LIST
334/L3088 881H321 Tooth Bar for 54" bucket - Over bucket NO 77 * * * * * * * * * * * * * * $593
334/L3086 881H322 Tooth Bar for 60" bucket - Over bucket NO 79 * * * * * * * * * * * * * * $621
332/L3521 881H305 Tooth Bar for 66" bucket - Over bucket NO 90 * * * * * * * * * * * * * * $765
334/L1859 881H326 Tooth Bar for 68" bucket - Over bucket NO 90 * * * * * * * * * * * * * * $650
332/L3532 881H306 Tooth Bar for 72" bucket - Over bucket NO 102 * * * * * * * * * * $666
334/L1856 881H317 Tooth Bar for 75" bucket - Over bucket NO 106 * * * * * * * * * * * * $677
332/L3535 881H307 Tooth Bar for 78" bucket - Over bucket NO 106 * * * * * * * $689
332/L3561 881H308 Tooth Bar for 84" bucket - Over bucket NO 118 * * * * * $714
334/L3089 881H323 Tooth Bar for 54 bucket - Over bolt on edge NO 97 * * * * * * * * * * * * * * $663
334/L3085 881H324 Tooth Bar for 60" bucket - Over bolt on edge NO 99 * * * * * * * * * * * * * * $689
332/L3529 881H309 Tooth Bar for 66" bucket - Over bolt on edge NO 112 * * * * * * * * * * * * * * $694
334/L1860 881H327 Tooth Bar for 68" bucket - Over bolt on edge NO 112 * * * * * * * * * * * * * * $918
332/L3533 881H310 Tooth Bar for 72" bucket - Over bolt on edge NO 127 * * * * * * * * * * $928
334/L1858 881H318 Tooth Bar for 75" bucket - Over bolt on edge NO 127 * * * * * * * * * * * * $938
332/L3536 881H311 Tooth Bar for 78" bucket - Over bolt on edge NO 130 * * * * * * * $979
332/L3563 881H312 Tooth Bar for 84" bucket - Over bolt on edge NO 141 * * * * * $959
332/X4852 881H313 Tooth Guard NO 21 * * * * * * * * * * * * * * $132
334/L3089 881H323 Tooth Bar for 54 bucket - Over bolt on edge NO 97 * * * * * * * * * * * * * * $663
334/L3085 881H324 Tooth Bar for 60" bucket - Over bolt on edge NO 99 * * * * * * * * * * * * * * $689
332/L3529 881H309 Tooth Bar for 66" bucket - Over bolt on edge NO 112 * * * * * * * * * * * * * * $694
334/L1860 881H327 Tooth Bar for 68" bucket - Over bolt on edge NO 112 * * * * * * * * * * * * * * $918
332/L3533 881H310 Tooth Bar for 72" bucket - Over bolt on edge NO 127 * * * * * * * * * * $928
334/L1858 881H318 Tooth Bar for 75" bucket - Over bolt on edge NO 127 * * * * * * * * * * * * $938
332/L3536 881H311 Tooth Bar for 78" bucket - Over bolt on edge NO 130 * * * * * * * $979
332/L3563 881H312 Tooth Bar for 84" bucket - Over bolt on edge NO 141 * * * * * $959
332/X4852 881H313 Tooth Guard NO 21 * * * * * * * * * * * * * * $131
332/L3978 881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses)PASF NO 407 * * * * * * * * * * * * * * $3,029
332/L3979 881U401 Planetary Drive Auger - HIGH FLOW - (includes mounting bracket & hoses)PAHF NO 536 * * * * * * * $5,659
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Weight (lbs) 15
5
175
190
205
225
260
300
330
150T
190T
205T
225T
260T
300T LIST
980/A2019 881U450 6" X 4' Standard Auger 2" Hex NO 42 * * * * * * * * * * * * * * $262
980/A2021 881U451 9" X 4' Standard Auger 2" Hex NO 86 * * * * * * * * * * * * * * $433
980/A2023 881U452 12" X 4' Standard Auger 2" Hex NO 120 * * * * * * * * * * * * * * $473
980/A2025 881U453 15" X 4' Standard Auger 2" Hex NO 131 * * * * * * * * * * * * * * $587
980/A2027 881U454 18" X 4' Standard Auger 2" Hex NO 160 * * * * * * * * * * * * * * $674
980/A2028 881U455 24" X 4' Standard Auger 2" Hex NO 278 * * * * * * * * * * * * * * $772
980/A2029 881U456 30" X 4' Standard Auger 2" Hex NO 325 * * * * * * * * * * * * * * $1,004
980/A2030 881U457 36" X 4' Standard Auger 2" Hex NO 443 * * * * * * * * * * * * * * $1,221
980/A3001 881U458 6" X 4' Heavy Duty Auger 2" Hex NO 45 * * * * * * * * * * * * * * $481
980/A2031 881U459 9" X 4' Heavy Duty Auger 2" Hex NO 98 * * * * * * * * * * * * * * $649
980/A2032 881U460 12" X 4' Heavy Duty Auger 2" Hex NO 113 * * * * * * * * * * * * * * $737
980/A2034 881U461 15" X 4' Heavy Duty Auger 2" Hex NO 167 * * * * * * * * * * * * * * $1,087
980/A2035 881U462 18" X 4' Heavy Duty Auger 2" Hex NO 163 * * * * * * * * * * * * * * $1,119
980/A2037 881U463 24" X 4' Heavy Duty Auger 2" Hex NO 272 * * * * * * * * * * * * * * $1,472
980/A2038 881U464 30" X 4' Heavy Duty Auger 2" Hex NO 312 * * * * * * * * * * * * * * $1,922
980/A2039 881U465 36" X 4' Heavy Duty Auger 2" Hex NO 430 * * * * * * * * * * * * * * $2,354
980/L7251 881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex NO 144 * * * * * * * * * * * * * * $638
980/L7257 881U467 24" X 4' Tree & Shrub Planting Auger 2" Hex NO 198 * * * * * * * * * * * * * * $711
980/L7267 881U468 30" X 4' Tree & Shrub Planting Auger 2" Hex NO 264 * * * * * * * * * * * * * * $1,745
980/L7270 881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex NO 349 * * * * * * * * * * * * * * $1,754
AUGER BITS - HEAVY DUTY
AUGER BITS - TREE & SCHRUB
NOTE: MACHINE WIDTH IS DEPENDENT ON TIRE OR TRACK SPECIFICATION. CONFIRM OVERALL MACHINE WIDTH WITH SPECIFIC TIRES OR TRACKS FOR CORRECT BUCKET SIZING.
1. ATTACHMENTS - 2
BUCKET ACCESSORIES (Continued)
AUGER DRIVE UNITS
AUGER BITS - STANDARD DUTY
All prices and specifications subject to change without notice 209 of 217 New Generation SSL and CTL Dealer Fit USD Price Pages Effective February 1, 2015
980/L7271 881U470 Hex. Drive Extension - 12" NO 20 * * * * * * * * * * * * * * $171
980/L7272 881U471 Hex. Drive Extension - 18" NO 26 * * * * * * * * * * * * * * $252
980/L7273 881U472 Hex. Drive Extension - 24" NO 32 * * * * * * * * * * * * * * $335
333/L5627 881U532 Bale Spear BSP NO 180 * * * * * * * * * * * * * * $837
AUGER EXTENSIONS
BALE SPEARS
All prices and specifications subject to change without notice 210 of 217 New Generation SSL and CTL Dealer Fit USD Price Pages Effective February 1, 2015
NEW GENERATION SKID STEER & COMPACT TRACK LOADER DEALER FIT PRICE PAGE 3 INDEX
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Weight (lbs) 15
5
175
210
215
250
270
300
330
150T
210T
215T
250T
270T
300T LIST
980/A7456 881U354HM266Q (includes Chisel & Moil) - *980/28400 Mounting Bracket required*
HM266Q NO 228 * * * * * * * * * * * * * * $8,976
980/28400 881U351 Mounting Plate - Required for HM266Q Hammer NO 185 * * * * * * * * * * * * * * $983
980/A3483 881U352HM386Q (includes Chisel & Moil) - *980/68700 Mounting Bracket required*
HM386Q NO 725 * * * * * * * $12,138
980/68700 881U353 Mounting Plate - Required for HM386Q Hammer NO 185 * * * * * * * $1,866
332/X2465 881U303 Angle broom - 60" with manual angle adjustment link BR60 NO 805 * * * * * * * * * * * * * * $6,426
332/L3992 881U300 Angle broom - 72" with manual angle adjustment link BR72 NO 852 * * * * * * * $6,936
332/L4027 881U301 Angle broom - 84" with manual angle adjustment link BR84 NO 915 * * * * * * $7,397
332/L3983 881U302Hydraulic angle kit for Angle Broom (Requires Optional 7 Way Joysticks)
YES 40 * * * * * * * * * * * * * * $1,385
333/X5390 60" Brush Cutter - Standard Flow BC60 NO 1120 * * * * * * * * * * $8,155
333/X5231 881U523 72" Brush Cutter - Standard Flow BC72 NO 1280 * * * * * * * * * * $8,782
333/X4409 881U524 72" Brush Cutter - HIGH FLOW BC72HF NO 1320 * * * * * * * $9,894
333/X4383 881U525 78' Brush Cutter - HIGH FLOW BC78HF NO 1405 * * * * * $10,685
332/X4382 881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow CP12 YES 1500 * * * * * * * * * * * * * * $13,938
332/X4299 881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW CP16HF YES 2200 * * * * * * * * * * * * * * $21,440
332/X4300 881U607 18" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW CP18HF YES 2225 * * * * * * * * * * * * * * $21,734
332/L7272 881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW CP24HF YES 2425 * * * * * * * * * * * * * * $21,841
332/X4301 881U609 30" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW CP30HF YES 2625 * * * * * * * $23,779
332/X4302 881U610 40" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW CP40HF YES 3125 * * * * * * * $27,943
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Weight (lbs) 15
5
175
190
205
225
260
300
330
150T
190T
205T
225T
260T
300T LIST
332/X4285 881U518 84" Dozer Blade - 6 Way Hydraulic HDB84 YES 1300 * * * * * $7,788
332/X4287 881U519 96" Dozer Blade - 6 Way Hydraulic HDB96 YES 1400 * * * * * $7,790
332/X4391Adapter Harness for In-Cab Controls (allows for use with 3-way controls)
YES * * * * * $437
334/L8351 881U516 60" Forestry Cutting Head - HIGH FLOW FC60HF YES 2640 * * * * * * * $32,659
332/L3341 881D313Pallet Fork Frame, Load backrest and 42" Tines (Heavy Duty 6,000lb lift capacity)
PF42 NO 450 * * * * * * * * * * * * * * 1,665
332/L3342 881D314Pallet Fork Frame, Load backrest and 48" Tines (Heavy Duty 6,000lb lift capacity)
PF48 NO 480 * * * * * * * * * * * * * * 1,377
333/L6079 881U530 60" Manure Forks with Top Grapple MFG60 NO 418 * * * * * * * * * * * * * * 2,472
333/L6106 881U531 66" Manure Forks with Top Grapple MFG66 NO 459 * * * * * * * * * * * * * * 3,736
332/L3869 881U550 72" Manure Forks with Top Grapple MFG72 NO 655 * * * * * * * * * * 4,093
332/L3879 881U551 84" Manure Forks with Top Grapple MFG84 NO 805 * * * * * * 4,533
333/L5021 881U209 60" Heavy Duty Brush Grapple HBG60 NO 715 * * * * * * * * * * * * * * 5,203
333/L5022 881U210 66" Heavy Duty Brush Grapple HBG66 NO 739 * * * * * * * * * * * * * * 5,416
332/L4030 881U200 72" Heavy Duty Brush Grapple HBG72 NO 925 * * * * * * * * * * 5,508
332/L4033 881U201 78" Heavy Duty Brush Grapple HBG78 NO 999 * * * * * * 5,658
332/L4035 881U202 84" Heavy Duty Brush Grapple HBG84 NO 1054 * * * * * 5,979
333/L1085 881U211 60" Heavy Duty Scrap Grapple (solid floor) HSG60 NO 702 * * * * * * * * * * * * * * 5,091
333/L1109 881U212 66" Heavy Duty Scrap Grapple (solid floor) HSG66 NO 739 * * * * * * * * * * * * * * 5,300
332/L4036 881U203 76" Heavy Duty Scrap Grapple (solid floor) HSG76 NO 1081 * * * * * * * * * * 5,593
332/L4039 881U204 82" Heavy Duty Scrap Grapple (solid floor) HSG82 NO 1133 * * * * * 5,610
FORKS - PALLET
FORKS - MANURE WITH TOP GRAPPLE
GRAPPLES - BRUSH
GRAPPLES - SCRAP
BRUSH CUTTERS
**Brush Cutters Require Fitment of Height Limiter Device**
COLD PLANERS
DOZER BLADES
FORESTRY CUTTING HEAD
**Forestry Cutting Head Requires Fitment of Machine Forestry Protection Package - Sales Code 881G016**
BROOMS - ANGLE
NOTE: MACHINE WIDTH IS DEPENDENT ON TIRE OR TRACK SPECIFICATION. CONFIRM OVERALL MACHINE WIDTH WITH SPECIFIC TIRES OR TRACKS FOR CORRECT BUCKET SIZING.
1. ATTACHMENTS - 3
BREAKERS / HYDRAULIC HAMMERS
** Front Impact Protection Screen Option Recommended with use of Hydraulic Breakers - Machine Sales Code 881G008 or 881G009**
All prices and specifications subject to change without notice 211 of 217 New Generation SSL and CTL Dealer Fit USD Price Pages Effective February 1, 2015
NEW GENERATION SKID STEER & COMPACT TRACK LOADER DEALER FIT PRICE PAGE 4 INDEX
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Weight (lbs) 15
5
175
210
215
250
270
300
330
150T
210T
215T
250T
270T
300T LIST
333/L6180 881U473 60" Landscape Power Rake with Manual Angle PRM60 NO 940 * * * * * * * * * * * * * * 10,581
333/L6126 881U474 60" Landscape Power Rake with Hydraulic Angle PRH60 YES 950 * * * * * * * * * * * * * * 11,817
332/L3939 881U500 72" Landscape Power Rake with Manual Angle PRM72 NO 900 * * * * * * * * * * 11,281
332/L3947 881U501 72" Landscape Power Rake with Hydraulic Angle PRH72 YES 925 * * * * * * * * * * 11,883
332/L7237 881U502 84" Landscape Power Rake with Manual Angle PRM84 NO 970 * * * * * * * 14,027
332/L3951 881U503 84" Landscape Power Rake with Hydraulic Angle PRH84 YES 1050 * * * * * * * 14,280
332/L7247 881U504 90" Landscape Power Rake with Manual Angle PRM90 NO 1240 * * * * * 14,127
332/L7248 881U505 90" Landscape Power Rake with Hydraulic Angle PRH90 YES 1320 * * * * * 14,576
332/L7253 881U508 66" Auto Rake - Standard Flow AR66 NO 1390 * * * * 10,506
332/L3960 881U509 76" Auto Rake - Standard Flow AR76 NO 1485 * * * * * * 10,659
332/L7252 881U506 66' Landscape Preperator - Standard Flow LSP66 NO 1270 * * * * * * * 10,037
332/L3954 881U507 76" Landscape Preperator - Standard Flow LSP76 NO 1465 * * * * * * 13,415
332/L7244 881U611 Rock Saw - 18" Depth - HIGH FLOW RS18HF YES 1995 * * * * * * * $20,351
332/L7269 881U612 Rock Saw - 24" Depth - HIGH FLOW RS24HF YES 2385 * * * * * $22,579
332/X4338 881U552 96" Silage Defacer - Standard Flow SD96 NO 940 * * * * * * $6,176
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Weight (lbs) 15
5
175
190
205
225
260
300
330
150T
190T
205T
225T
260T
300T LIST
333/L8499 881U533 60" Snow Blade - Manual Angle SBM60 NO 430 * * * * * * * * * * * * * * $2,106
332/X4347 881U650 72" Snow Blade - Manual Angle SBM72 NO 595 * * * * * * * * * * * * * * $2,122
332/X4348 881U651 84" Snow Blade - Manual Angle SBM84 NO 635 * * * * * * $2,137
332/X4349 881U652 96" Snow Blade - Manual Angle SBM96 NO 650 * * * * * * $2,162
333/L8498 881U534 60" Snow Blade - Hydraulic Angle SBH60 YES 470 * * * * * * * * * * * * * * $2,601
332/X4350 881U653 72" Snow Blade - Hydraulic Angle SBH72 YES 595 * * * * * * * * * * * * * * $2,652
332/X4351 881U654 84" Snow Blade - Hydraulic Angle SBH84 YES 635 * * * * * * $2,703
332/X4352 881U655 96" Snow Blade - Hydraulic Angle SBH96 YES 650 * * * * * * $2,754
332/L3915 881U656 96" Heavy Duty Snow Blade - Hydraulic Angle HSB96 YES 780 * * * * * $4,641
332/L3927 881U657 108"Heavy Duty Snow Blade - Hydraulic Angle HSB108 YES 850 * * * * * $4,692
332/L3932 881U658 120" Heavy Duty Snow Blade - Hydraulic Angle HSB120 YES 925 * * * * * $4,787
333/L6154 881U535 60" Snow Blower - Standard Flow SBL60 YES 820 * * * * * * * * * * * * * * $8,618
332/X4383 881U663 72" Snow Blower - Standard Flow SBL72 YES 685 * * * * * * * * * * * * * * $8,645
332/X4384 881U664 78" Snow Blower - Standard Flow SBL78 YES 703 * * * * * * * * * * $8,670
332/X4385 881U665 84" Snow Blower - Standard Flow SBL84 YES 720 * * * * * * $8,696
334/L2463 881U659 72" Snow Blower - HIGH FLOW SMALL PLATFORM ONLY SBL72SPHF YES 1160 * * * * * * * * * * * * * * $9,833
332/X4399 881U660 72" Snow Blower - HIGH FLOW SBL72HF YES 1160 * * * * * * * $9,833
334/L2491 881U667 78" Snow Blower - HIGH FLOW SMALL PLATFORM ONLY SBL78SPHF YES 1200 * * * $10,124
332/X4400 881U661 78" Snow Blower - HIGH FLOW SBL78HF YES 1200 * * * * * * * $10,272
332/X4401 881U662 84" Snow Blower - HIGH FLOW SBL84HF YES 1240 * * * * * * $13,894
333/X6486 881U670 72" Snow Push SBM72 NO 525 * * * * * * * * * * * * * * $3,682
333/X6487 881U671 84" Snow Push SBM84 NO 570 * * * * * * * $3,794
333/X6488 881U672 96" Snow Push SBM96 NO 615 * * * * * $4,279
332/X4294 881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow SGS26 YES 720 * * * * * * * * * * * * * * $8,516
332/X4295 881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW SG30HF YES 795 * * * * * * * * * * * * * * $9,708
** Front Impact Protection Screen Option Recommended with use of Stump Grinders - Machine Sales Code 881G008 or 881G009**
ROCK SAWS
SILAGE DEFACER
SNOW BLADES
SNOW BLOWERS
SNOW PUSHERS
STUMP GRINDERS
RAKES - LANDSCAPE PREPARATOR
NOTE: MACHINE WIDTH IS DEPENDENT ON TIRE OR TRACK SPECIFICATION. CONFIRM OVERALL MACHINE WIDTH WITH SPECIFIC TIRES OR TRACKS FOR CORRECT BUCKET SIZING.
1. ATTACHMENTS - 4
RAKES - LANDSCAPE POWER
RAKES - AUTO
All prices and specifications subject to change without notice 212 of 217 New Generation SSL and CTL Dealer Fit USD Price Pages Effective February 1, 2015
NEW GENERATION SKID STEER & COMPACT TRACK LOADER DEALER FIT PRICE PAGE 5 INDEX
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Weight (lbs) 15
5
175
210
215
250
270
300
330
150T
210T
215T
250T
270T
300T LIST
334/P2834 881U247 60" Pick-Up Sweeper SC60 NO 840 * * * * * * * * * * * * * * $6,615
334/P2836 881U248 72" Pick-Up Sweeper SC72 NO 956 * * * * * * * * * * $6,911
334/P2839 881U249 84" Pick-Up Sweeper SC84 NO 1072 * * * * * * * $7,421
333/X2103 Sprinkler Kits with 25 gallon tank NO 47 * * * * * * * * * * * * * * TBD
333/L8191 881U526 52" Tiller - 6 inch tines - Standard Flow TLR52 NO 810 * * * * * * * * * * * * * * $6,103
332/X4380 881U510 66" Tiller - 6 inch tines - HIGH FLOW TLR66HF NO 880 * * * * $6,324
332/X4381 881U511 78" Tiller - 6 inch tines - HIGH FLOW TLR78HF NO 1100 * * * * * * $6,640
332/X4296 881U602Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter
TS26 NO 1100 * * * * * * $11,182
332/X4297 881U603Tree Spade with Blades / 25 degree cutting angle / 24" - 36" ball diameter
TS36 NO 1500 * * * $14,076
332/X4298 881U604Tree Spade with Blades / 25 degree cutting angle / 32" - 44" ball diameter
TS44 NO 1825 * * * $14,584
333/L8251 881U52930" Trencher with 6" wide chain, crumber and hoses - Standard Flow
TR30 NO 1040 * * * * * * * * * * * * * * $4,998
332/L7251 881U52036" Trencher with 6" wide chain, crumber and hoses - Standard Flow
TR36 NO 1040 * * * * * * * * * * * * * * $5,255
332/X4289 881U52148" Trencher with 6" wide chain, crumber and hoses - Standard Flow
TR48 NO 1120 * * * * * * * * * * * * $5,769
332/X4290 881U52248" Trencher with 6" wide chain, crumber and hoses - HIGH FLOW
TR48HF NO 1120 * * * * * * * $7,643
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Weight (lbs) 15
5
175
190
205
225
260
300
330
150T
190T
205T
225T
260T
300T LIST
332/X4709 881U527 66" Vibratory Roller - Smooth Drum VR66S NO 2150 * * * * * * * * * * $9,920
332/X4281 881U512 73" Vibratory Roller - Smooth Drum VR73S NO 2300 * * * * * * * * * * $10,710
332/X4282 881U513 84" Vibratory Roller - Smooth Drum VR84S NO 2530 * * * * * $10,816
332/X4710 881U528 66" Vibratory Roller - Padded Drum VR66P NO 2085 * * * * * * * * * * $10,762
332/X4283 881U514 73" Vibratory Roller - Padded Drum VR73P NO 2230 * * * * * * * * * * $11,042
332/X4284 881U515 84" Vibratory Roller - Padded Drum VR84P NO 2455 * * * * * $11,603
335/A5620 N/A Creep Speed N/A * * * * * * * * * * * * * * $132
335/A5622 N/A Dual Pattern Control N/A * * * * * * * * * * * * * * $590335/A5624 N/A JCB Immobilizer (All machine configurations) N/A * * * * * * * * * * * * * * $424
TRENCHERS
VIBRATORY ROLLERS
ELECTRICAL & OPERATOR COMPARTMENT OPTIONS - TIER IV ENGINE
NOTE: MACHINE WIDTH IS DEPENDENT ON TIRE OR TRACK SPECIFICATION. CONFIRM OVERALL MACHINE WIDTH WITH SPECIFIC TIRES OR TRACKS FOR CORRECT BUCKET SIZING.
1. ATTACHMENTS - 5
SWEEPER COLLECTORS
TILLERS
TREE SPADES
All prices and specifications subject to change without notice 213 of 217 New Generation SSL and CTL Dealer Fit USD Price Pages Effective February 1, 2015
Index
2018
DEALER FIT:
2. KITS
FOR
JCB SKID STEER andCOMPACT TRACK
LOADERS
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
NEW GENERATION SKID STEER & COMPACT TRACK LOADER DEALER FIT PRICE PAGE 6 INDEX
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Serial Number 15
5
175
210
215
250
270
300
330
150T
210T
215T
250T
270T
300T LIST
985/X5575 N/A Front Screen Guard N/A NO1745010-1745999
* * * * * * * * * * * * * * $510
985/X5577 N/A RH FOPS Guard (Requires 985/X5579 Level 2 FOPS Guard) N/A NO1745010-1745999
* * * * * * * * * * * * * * $536
985/X5653 N/A Lexan Front Screen N/A NO1745010-1745999
* * * * * * * * * * * * * * $2,081
985/X5579 N/A Level 2 FOPS Guard (Cab) N/A NO1745010-1745999
* * * * * * * * * * * * * * $1,913
985/X9917 N/A Electric Quickhitch N/A YES1745010-1745999
* * * * * * * * * * * * * * $1,275
985/X5674 N/A LH Auxiliary (Standard Flow Machines ONLY) N/A NO1745010-1745999
* * * * * * * $1,356
985/X4587 N/A Road Light w/Brake Lights N/A NO1745010-1745999
* * * * * * * $1,515
985/X5628 N/A Foot Throttle N/A NO1745010-1745999
* * * * * * * $368
985/X4685 N/A Smooth Ride System N/A NO1745010-1745999
* * * * * * * $959
985/X6274 N/A Air Conditioning w/Heat N/A NO1745010-1745999
* * * * * * * $3,690
985/A9858 N/AVentilated Rear Door (REQUIRED if Cab/Chassis Seal Kit 985/A9644 or 985/A9649 is installed)
N/A NO1745010-1745999
* * * * * * * $224
985/A2100 N/A Filter Pre-cleaner N/A NO1745010-1745999
* * * * * * * $626
985/X5546 N/A Canopy to Cab Conversion - Wheeled HEAT ONLY N/A NO1745010-1745999
* * * * $3,417
985/X5886 N/A Multi-function Joystick - Wheeled N/A YES1745010-1745999
* * * * $1,836
985/X5583 N/A LH Complete Door - Canopy Build Wheeled N/A NO1745010-1745999
* * * * $919
985/X5680 N/A Hydraulic Quickhitch Vertical Lift N/A NO1745010-1745999
* * * * * $2,030
985/X6135 N/A Hydraulic Quickhitch Radial Lift N/A NO1745010-1745999
* * $2,030
985/X5566 N/A Canopy to Cab Conversion - Tracked HEAT ONLY N/A NO1745010-1745999
* * * $3,417
985/A9354 N/A Multi-function Joystick - Tracked N/A YES1745010-1745999
* * * $1,889
985/A9644 N/ACab/Chassis Seal Kit for Adverse Applications - Wheeled (Ventilated Rear Door 985/A9858 REQUIRED for LP Machines)
N/A NO1745010-1745999
* * * * * * * * $275
985/A9649 N/ACab/Chassis Seal Kit for Adverse Applications - Tracked (Ventilated Rear Door 985/A9858 REQUIRED for LP Machines)
N/A NO1745010-1745999
* * * * * * $296
985/X5585 N/A LH Complete Door - Canopy Build Tracked N/A NO1745010-1745999
* * * * * * $842
985/A9855 N/A Air Conditioning Kit w/Heat N/A NO1755000-1764999
* * * * * * * $2,912
985/A9834 N/A Smooth Ride System N/A NO1755000-1764999
* * * * * * * $1,025
985/A9827 N/A Road Light w/Brake Lights N/A NO1755000-1764999
* * * * * * * $1,257
985/A9820 N/A Foot Throttle N/A NO1755000-1764999
* * * * * * * $422
985/A9813 N/A Multifunction Joystick N/A NO1755000-1764999
* * * * * * * $4,181
985/A9809 N/A LH Complete Door - Canopy Build Wheeled N/A NO1755000-1764999
* * * * $1,004
985/A9837 N/A Canopy to Cab Conversion - Wheeled HEAT ONLY N/A NO1755000-1764999
* * * * $4,687
985/A9842 N/A Canopy to Cab Conversion - Tracked HEAT ONLY N/A NO1755000-1764999
* * * $4,593
985/A9848 N/A Hydraulic Quickhitch Vertical Lift N/A NO1755000-1764999
* * * * * $2,244
985/A9851 N/A Hydraulic Quickhitch Radial Lift N/A NO1755000-1764999
* * $2,219
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Serial Number 15
5
175
190
205
225
260
300
330
150T
190T
205T
225T
260T
300T LIST
NOTE: MACHINE WIDTH IS DEPENDENT ON TIRE OR TRACK SPECIFICATION. CONFIRM OVERALL MACHINE WIDTH WITH SPECIFIC TIRES OR TRACKS FOR CORRECT BUCKET SIZING.
2. DEALER FIT KITS - 1
DEALER FIT KITS - TIER III ENGINE
All prices and specifications subject to change without notice 215 of 217 New Generation SSL and CTL Dealer Fit USD Price Pages Effective February 1, 2015
NEW GENERATION SKID STEER & COMPACT TRACK LOADER DEALER FIT PRICE PAGE 7 INDEX
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Serial Number 15
5
175
210
215
250
270
300
330
150T
210T
215T
250T
270T
300T LIST
985/X5575 N/A Front Screen Guard N/A NO2427501-2427800
* * * * * * * $510
985/X5577 N/A RH FOPS Guard (Requires 985/X5579 Level 2 FOPS Guard) N/A NO2427501-2427800
* * * * * * * $536
985/X5579 N/A Level 2 FOPS Guard (Cab) N/A NO2427501-2427800
* * * * * * * $1,913
985/X5653 N/A Lexan Front Screen N/A NO2427501-2427800
* * * * * * * $2,081
985/A9881 N/A Electric Quickhitch N/A YES2427501-2427800
* * * * * * * $1,545
985/A9813 N/A Multifunction Joystick N/A NO2427501-2427800
* * * * * * * $4,181
985/X5585 N/A LH Complete Door - Canopy Build Tracked N/A NO2427501-2427800
* * * * * * $842
985/A2060 N/A Canopy to Cab Conversion - Tracked HEAT ONLY N/A NO2427501-2427800
* * * * * * $5,161
985/A9820 N/A Foot Throttle N/A NO2427501-2427800
* * * * * * * $422
985/X9922 N/A Reversing Fan N/A NO2427501-2427800
* * * * * * * $918
985/A9647 N/A LH Auxiliary (Standard Flow Machines ONLY) N/A NO2427501-2427800
* * * * * * * $1,183
985/A1463 N/A Roadlight w/Brake Lights N/A NO2427501-2427800
* * * * * * * $1,404
985/A1533 N/A Air Conditioning w/Heat N/A NO2427501-2427800
* * * * * * * $5,783
985/A1554 N/A Smooth Ride System N/A NO2427501-2427800
* * * * * * * $1,283
985/A9882 N/A Canopy to Cab Conversion - Wheeled HEAT ONLY N/A NO2427501-2427800
* * * * $5,179
985/X5583 N/A LH Complete Door - Canopy Build Wheeled N/A NO2427501-2427800
* * * * $919
Part # Sales Code DescriptionJCB Model
NameMulti-Func.
Controls Serial
Number 155
175
190
205
225
260
300
330
150 T 190 T 205 T 225 T 260 T 300 T LIST
985/X5575 N/A Front Screen Guard N/A NO2196001-2201001
* * * * * * * * * * * * * * $510
985/X5579 N/A Level 2 FOPS Guard (Cab) N/A NO2196001-2201001
* * * * * * * * * * * * * * $1,913
985/X5577 N/A RH FOPS Guard (Requires 985/X5579 Level 2 FOPS Guard) N/A NO2196001-2201001
* * * * * * * * * * * * * * $536
985/X5653 N/A Lexan Front Screen N/A NO2196001-2201001
* * * * * * * * * * * * * * $2,081
985/A9813 N/A Multifunction Joystick N/A NO2196001-2201001
* * * * * * * * * * * * * * $4,181
985/A9820 N/A Foot Throttle N/A NO2196001-2201001
* * * * * * * * * * * * * * $422
985/A9881 N/A Electric Quickhitch N/A YES2196001-2201001
* * * * * * * * * * * * * * $1,545
985/A1463 N/A Roadlight w/Brake Lights N/A NO2196001-2201001
* * * * * * * $1,404
985/A1533 N/A Air Conditioning w/Heat N/A NO2196001-2201001
* * * * * * * $5,783
985/A9647 N/A LH Auxiliary (Standard Flow Machines ONLY) N/A NO2196001-2201001
* * * * * * * $1,183
985/A1554 N/A Smooth Ride System N/A NO2196001-2201001
* * * * * * * $1,283
985/X5583 N/A LH Complete Door - Canopy Build Wheeled N/A NO2196001-2201001
* * * * $919
985/A9882 N/A Canopy to Cab Conversion - Wheeled HEAT ONLY N/A NO2196001-2201001
* * * * $5,179
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Serial Number 15
5
175
190
205
225
260
300
330
150T
190T
205T
225T
260T
300T LIST
NOTE: MACHINE WIDTH IS DEPENDENT ON TIRE OR TRACK SPECIFICATION. CONFIRM OVERALL MACHINE WIDTH WITH SPECIFIC TIRES OR TRACKS FOR CORRECT BUCKET SIZING.
2. DEALER FIT KITS - 2
DEALER FIT KITS - TIER III ENGINE GLOBAL CHASSIS
DEALER FIT KITS - TIER IV ENGINE
CONTINUED OVER
All prices and specifications subject to change without notice 216 of 217 New Generation SSL and CTL Dealer Fit USD Price Pages Effective February 1, 2015
NEW GENERATION SKID STEER & COMPACT TRACK LOADER DEALER FIT PRICE PAGE 8 INDEX
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Serial Number 15
5
175
210
215
250
270
300
330
150T
210T
215T
250T
270T
300T LIST
985/X5585 N/A LH Complete Door - Canopy Build Tracked N/A NO2196001-2201001
* * * * * * $842
985/A2060 N/A Canopy to Cab Conversion - Tracked HEAT ONLY N/A NO2196001-2201001
* * * * * * $5,161
985/A4654 N/A Smooth Ride System N/A NO2201002-2206002
* * * * * * * $1,069
985/A5631 N/A Air Conditioning w/Heat N/A NO2201002-2206002
* * * * * * * $5,273
985/A5961 N/A Roadlight w/Brake Lights N/A NO2201002-2206002
* * * * * * * $1,132
985/A9809 N/A LH Complete Door - Canopy Build Wheeled N/A NO2201002-2206002
* * * * $1,004
985/A5574 N/A Canopy to Cab Conversion - Wheeled HEAT ONLY N/A NO2201002-2206002
* * * * $3,989
985/A5576 N/A Canopy to Cab Conversion - Tracked HEAT ONLY N/A NO2201002-2206002
* * * $4,039
985/X5575 N/A Front Screen Guard N/A NO2427801-2428800
* * * * * * * * * * * * * * $510
985/X5579 N/A Level 2 FOPS Guard (Cab) N/A NO2427801-2428800
* * * * * * * * * * * * * * $1,913
985/X5577 N/A RH FOPS Guard (Requires 985/X5579 Level 2 FOPS Guard) N/A NO2427801-2428800
* * * * * * * $536
985/X5653 N/A Lexan Front Screen N/A NO2427801-2428800
* * * * * * * $2,081
985/A9813 N/A Multifunction Joystick N/A NO2427801-2428800
* * * * * * * $4,181
985/A9881 N/A Electric Quickhitch N/A YES2427801-2428800
* * * * * * * $1,545
985/A9881 N/A Electric Quickhitch N/A YES2427801-2428800
* * * * * * * $1,545
985/A9647 N/A LH Auxiliary (Standard Flow Machines ONLY) N/A NO2727801-2428800
* * * * * * * $1,183
985/A1463 N/A Roadlight w/Brake Lights N/A NO2727801-2428800
* * * * * * * $1,404
985/A1533 N/A Air Conditioning w/Heat N/A NO2727801-2428800
* * * * * * * $5,783
985/A1554 N/A Smooth Ride System N/A NO2727801-2428800
* * * * * * * $1,283
985/A9882 N/A Canopy to Cab Conversion - Wheeled HEAT ONLY N/A NO2727801-2428800
* * * * $5,179
985/X5583 N/A LH Complete Door - Canopy Build Wheeled N/A NO2427801-2428800
* * * * $919
985/X5585 N/A LH Complete Door - Canopy Build Tracked N/A NO2427801-2428800
* * * * * * $842
985/A2060 N/A Canopy to Cab Conversion - Tracked HEAT ONLY N/A NO2727801-2428800
* * * $5,161
985/A9809 N/A LH Complete Door - Canopy Build Wheeled N/A NO2201002-2206002
* * * * $1,004
985/X9922 N/A Reversing Fan N/A NO2427801-2428800
* * * * * * * $918
985/X5583 N/A LH Complete Door - Canopy Build Wheeled N/A NO2427801-2428800
* * * * $919
Part # Sales Code DescriptionJCB Model
Name
Multi-Func. Controls Required.
Serial Number 15
5
175
190
205
225
260
300
330
150T
190T
205T
225T
260T
300T LIST
NOTE: MACHINE WIDTH IS DEPENDENT ON TIRE OR TRACK SPECIFICATION. CONFIRM OVERALL MACHINE WIDTH WITH SPECIFIC TIRES OR TRACKS FOR CORRECT BUCKET SIZING.
2. DEALER FIT KITS - 3
DEALER FIT KITS - TIER IV ENGINE (Continued)
DEALER FIT KITS - TIER IV ENGINE GLOBAL CHASSIS
All prices and specifications subject to change without notice 217 of 217 New Generation SSL and CTL Dealer Fit USD Price Pages Effective February 1, 2015
2017
COMPACT WHEEL LOADER
407
EFFECTIVE: JANUARY 01, 2018
ISSUE 1.0
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
407 COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 01,
2018
STANDARD EQUIPMENT
GENERAL
ENGINE
TRANSMISSION
TIRES
FRONT/REAR AXLE
BRAKES Inboard wet disc brakes on rear
axle. Park brake in center casing of
ELECTRICS
INSTRUMENTS
CAB UNIT
HYDRAULICS
LOADER
LIVELINK
WARRANTY
Front and rear unitized mainframe coupled by heavy duty articulation point. Front and rear
fenders. One piece rear engine cover.
JCB by Kohler 2.5 L (151 CID) Industrial 4 - cylinder water cooled direct injection with 64
gross HP Tier 4 Final engine, dual element air cleaner, spin on filter, water separator,
thermostart assist.
Hydrostatic transmission incorporating a speed inhibitor and modulation for smooth
directional changes featuring automatic braking effect for ease of operation and high/ low
operating range. Direction change on joystick and switchable high/low range. 12.4mph top
speed.
Several types available. See section 2
As standard limited slip differentials in both axles for superior traction. Diff lock option. Fixed
straight beam axles for front and rear
3 Years subscription allows for enhanced machine security, improved service monitoring,
and modernized fleet control
3 Year full coverage warranty. Extended warrenty avaliable (please see the machine
warranty certificate for details)
12 volt, IP 67 water and dust resistant connectors with numerical coded wiring. 80 amp
alternator with heavy duty low maintenance battery rated at 900 CCA
Loader arms with general purpose bucket (see options, Section 3). Parallel fork lift with
the use of JCB pallet forks. One hydraulic circuit with diverter valve for use with hydraulic
attachments.
Single gear pump with 15.8GPM auxiliary flow. Single lever control for lift and tilt functions
with direction control switch. Priority steering valve for accurate handling and safety
SAE certified ROPS/FOPS fully enclosed cab. Low line one piece windshield and side
windows. Fully adjustable cloth suspension seat, retractable 3 inch seat belt, front
windshield washer/ wiper. Loader control lockout mechanism. Operators manual. Canopy -
open ROPS frame with vinyl seat
Audible and visual engine and powertrain warning system monitoring engine oil pressure,
engine coolant temperature, air filter condition, alternator charge, hand brake applied,
transmission oil temperature, oil filter blocked, turn indicators, hazard warning and head
lamp main beam
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - LISTED SEPARATELY FOR ALL WHEEL LOADERS
All prices and specifications subject to change without notice page 2 of 6 407 USD Price Page
407 COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES F.O.B. SAVANNAH, GA
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES
YELLOW
SERIES
YELLOW
SERIES6641C
CODE ITEM Canopy CabHigh Spec,
High Speed
6641 407 Compact Wheel Loader Base Machine - 64 HP Gross, 4 Cylinder, Turbo ���� ���� ����
406A603 Solideal 12.5 x 18 ����
406A608 Dunlop 365/70 R18 SPT9 ���� ����
406B705 Cab - High Spec with Sliding Door Window ���� ����
406B711 Canopy - Four Pillars, No Glass ����
406C750 Heaterless - Canopy Only ����
406C752 Heater and Air Conditioning (for Use with Full Cab Only) ���� ����
406D703 12.5 Mph Standard Front Differential and Limited Slip Rear Axles ����
406D704 12.5 Mph Limited Slip Differential Front and Rear Axles ����
406D707 21.7 Mph Limited Slip Differential Front and Rear Axles ����
406E136 4 Spool Servo Control for Difflock - 35kph/21mph ����
406E700 3 Spool Manual, Joystick Control ����
406E702 3 Spool Servo, Joystick Control ����
406F756 Operators Handbook / Manual Pack - English. Includes Reverse Alarm ���� ���� ����
406G200 Quickhitch - JCB Hydraulic. Small Zettelmeyer type ���� ���� ����
406H100 GP Bucket 1.0 cu yd - includes Bolt-on-Edge. 1750MM/69" Wide ���� ���� ����
406N755 Under Hood Isolator ���� ����
406N762 Radio Installation Kit - High spec cabs only. Includes speakers and wiring (Excludes Radio) ���� ����
406N768 Worklights - Front & Rear (2) for Machines Equipped with Cab Heater Only. ����
406N769 Worklights - Front & Rear (2) for Machines Equipped with Air Conditioning. ���� ����
406R763 Tilt and Slide Steering Column ���� ����
406R769 Engine Cold Start Grid Heater ���� ����
406R771 Engine Block Heater - 110v ���� ����
406R774 Smooth Ride - Servo Control Only ����
406R778 Air Suspension Seat ����
406R789 Creep speed, includes hand throttle for heater and high flow (AC builds) ����
406T760 Bucket Level Indicator ���� ����
406T773 High flow hydraulics - 87lpm/22.9usgpm (60lpm/15.8uspgm as std) for creep speed machines ����
$56,612 $68,533 $78,885
EFFECTIVE: JANUARY 01, 2018
SUGGESTED LIST PRICE
Select one of the following machine PACKAGE BUILD codes. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may befitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 407 USD Price Page Issue 2
407 COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SALES U.S.
CODE ITEM LIST
BASE MACHINE
6641 407 Compact Wheel Loader Base Machine - 64 HP Gross, 4 Cylinder, Turbo $33,949
WHEELS AND TIRES (A)
406A113 Mitas 12.5-8 MPT-04 $3,532
406A116 Michelin Bibload 335/80 R18 $5,156
406A603 Solideal 12.5 x 18 $2,374
406A607 Dunlop 335/80 R18 SPT9 $3,963
406A608 Dunlop 365/70 R18 SPT9 $4,163
406A609 Dunlop 405/70 R18 SPT9 $4,656
406A612 Nokian 340/80XR18 TRI 2 $8,277
406A613 Michelin XMCL340/80 R18 $4,709
406A651 Dunlop 335/80 R20 SPT9 $4,336
OPERATORS AREA (B)
406B701 Cab - Low Spec with RH Ajar Window $7,967
406B702 Cab - High Spec with RH Ajar Window $8,552
406B704 Cab - Low Spec with Sliding Door Window $8,233
406B705 Cab - High Spec with Sliding Door Window $8,857
406B711 Canopy - Four Pillars, No Glass $3,995
HEATER (C)
406C750 Heaterless - Canopy Only $0
406C751 Heater for Use with Full Cab Only $717
406C752 Heater and Air Conditioning (for Use with Full Cab Only) $4,103
AXLES (D)
406D703 12.5 Mph Standard Front Differential and Limited Slip Rear Axles $8,954
406D704 12.5 Mph Limited Slip Differential Front and Rear Axles $9,313
406D705 12.5 Mph Difflock Front Differential and Limited Slip Rear Axles $9,817
406D706 21.7 Mph Standard Front Differential and Limited Slip Rear Axles $12,459
406D707 21.7 Mph Limited Slip Differential Front and Rear Axles $12,816
406D708 21.7 Mph Difflock Front Differential and Limited Slip Rear Axles $13,322
AUXILIARY HYDRAULICS (E)
406E113 3 Spool Manual, Joystick Control, For Difflock $3,171
406E114 4 Spool Manual, Joystick Control, For Difflock $4,224
406E115 3 Spool Servo Control for Difflock $4,127
406E116 4 Spool Servo Control for Difflock $5,177
406E134 3 Spool Servo Control for Difflock - 35kph/21mph $4,127
406E135 3 Spool Servo Control for Difflock - 35kph/21mph. Diff Lock $4,127
406E136 4 Spool Servo Control for Difflock - 35kph/21mph $5,177
406E137 4 Spool Servo Control for Difflock - 35kph/21mph. Diff Lock $5,177
406E700 3 Spool Manual, Joystick Control $3,171
406E701 4 Spool Manual, Joystick Control $4,224
406E702 3 Spool Servo, Joystick Control $4,127
406E703 4 Spool Servo, Joystick Control $5,177
OPERATORS MANUAL (F)
406F333 Operators Manual - French Canadian. Includes Reverse Alarm $0
406F756 Operators Handbook / Manual Pack - English. Includes Reverse Alarm $0
HYDRAULIC QUICKHITCH (G)
406G200 Quickhitch - JCB Hydraulic. Small Zettelmeyer type $2,077
406G201 Quick Coupler Ready $1,307
406G211 Hydraulic Skid Steer Loader Hitch (407) $2,077
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section tochange existing machines.
All prices and specifications subject to change without notice page 4 of 6 407 USD Price Page Issue 2
407 COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SALES U.S.
CODE ITEM LIST
CAB AND OPERATOR STATION OPTIONS
406N750 Rotating Beacon $94
406N755 Under Hood Isolator $0
406N762 Radio Installation Kit - High spec cabs only. Includes speakers and wiring (Excludes Radio) $97
406N767 Worklights Front (2) $94
406N768 Worklights - Front & Rear (2) for Machines Equipped with Cab Heater Only. $245
406N769 Worklights - Front & Rear (2) for Machines Equipped with Air Conditioning. $245
406N774 Reverse Lights x 2 $72
406N779 2x front and 2x rear LED cab worklights (For non AC builds) $650
406N780 2x front and 2x rear LED cab worklights (For AC builds) $650
406R100 Interior Mirror $24
406R750 Front Screen Guard $2,593
406R752 Head Lamp Guards $169
406R756 Storage Box - In Cab $525
406R757 In cab document box for operator manual $274
406R763 Tilt and Slide Steering Column $265
406R769 Engine Cold Start Grid Heater $212
406R771 Engine Block Heater - 110v $206
406R778 Air Suspension Seat $1,149
406R779 L/H Arm Rest for KAB Seat $112
406R780 Seat, Back Extension - KAB $139
406R784 Creep speed for heater builds $1,256
406S753 Fire Extinguisher (4.4 lbs Capacity) $178
HYDRAULICS AND OTHER MACHINE OPTIONS
406R773 Smooth Ride - Manual Controls Only $1,096
406R774 Smooth Ride - Servo Control Only $1,096
406R787 Creep speed, includes hand throttle for heater and high flow (Heater builds) $1,256
406R789 Creep speed, includes hand throttle for heater and high flow (AC builds) $1,256
406S750 Hydraulic tank cap locking plates $22
406S757 Rockinger Tow Hitch with 12V electrics. 7700lbs $1,158
406T753 Hose Burst Check Valves - Servo Hydraulics $1,523
406T756 Auxiliary Relief Valve 3 Spool Manual Control $98
406T757 Auxiliary Relief Valve 4 Spool Manual Control $199
406T758 Auxiliary Relief Valve 3 Spool Servo Control $102
406T759 Auxiliary Relief Valve 4 Spool Servo Control $199
406T760 Bucket Level Indicator $107
406T762 High Flow Hydraulics (Includes Constant Flow) $1,263
406T764 Constant Flow Hydraulics. 4 spool only $285
406T765 Rear hydraulic circuit with divertor in cab $552
406T770 Constant flow hydraulics, uni direction for servo controls $285
406T773 High flow hydraulics - 87lpm/22.9usgpm (60lpm/15.8uspgm as std) for creep speed machines $1,263
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 407 USD Price Page
407 COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SALES U.S.
CODE ITEM LIST
QUICK HITCH LOADER BUCKETS (SMALL ZETTELMEYER TYPE)
406H100 GP Bucket 1.0 cu yd - includes Bolt-on-Edge. 1750MM/69" Wide $1,847
406H701 GP Bucket 1.0 cu yd - includes Teeth $2,576
406H702 GP Bucket 1.0 cu yd - includes Bolt-on-Edge $2,675
406H706 6 in 1 Bucket 1.0 cu yd - includes Front & Rear 74" Toeplate $6,043
406H718 1.56 cu yd Bucket - Light Duty with Bolt-on-Edge $3,071
406H720 1.8 cu yd Bucket - Light Duty with Bolt-on-Edge $3,257
OTHER ATTACHMENTS (SMALL ZETTELMEYER TYPE)
406H710 47" Forks and Fork Frame (53" Wide) $1,291
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 407 USD Price Page
2017
COMPACT WHEEL LOADER
409
EFFECTIVE: JANUARY 01, 2018
ISSUE 1.0
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
409 COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
STANDARD EQUIPMENT
GENERAL
ENGINE
TRANSMISSION
TIRES
FRONT/REAR AXLES
BRAKES
ELECTRICS
INSTRUMENTS
CAB UNIT
HYDRAULICS
LOADER
LIVELINK
WARRANTY
WARRANTY
WARRANTY
3 Years subscription allows for enhanced machine security, improved service monitoring,
and modernized fleet control
3 Year full coverage warranty (please see the machine warranty certificate for details)
Front and rear unitized mainframe modules coupled by an extreme service articulation
joint. Front & rear fenders. One piece rear engine cover, cab door and ignition keyed
alike. Articulation locking strut.
Loader arm with a general purpose bucket (see Options, Section 3). Parallel fork lift with the use of JCB pallet forks. One hydraulic circuit with diverter valve for use with hydraulic
attachments.
Single gear pump with 83lpm/21.9gpm standard auxiliary flow. Single servo control lever for lift and tilt functions with direction control switch. Priority steering valve for accurate handling and safety.
SAE certified ROPS/FOPS fully enclosed cab. Low line one-piece windshields and side windows. Fully adjustable cloth suspension seat, retractable 3 inch seat belt, front windshield washer/ wiper Loader control lockout mechanism. Operators manual. Canopy - Open frame with vinyl seat
Audible and visual engine and powertrain warning system monitoring engine oil pressure, engine coolant temperature, air filter condition, alternator charge, hand brake applied, transmission oil temperature, oil filter blocked, turn indicators, hazard warning, head lamp main beam.
12 volt, IP 67 water and dust resistant connectors with numerical coded wiring. 80 amp alternator with heavy duty low maintenance battery rated at 900 CCA
Inboard wet disc brakes on rear axle. Park brake in center casing of rear axle
As standard limited slip differentials in both axles for superior traction. Diff lock option. Fixed straight beam axles for front and rear
Several types available. See Section 2.
Hydrostatic transmission incorporating a speed inhibitor and modulation for smooth
directional changes featuring automatic braking effect for ease of operation and high and
low operating range. Direction change on joystick and switchable high/low range.
12.4mph top speed.
JCB by Kohler 2.5 L (151 CID) Industrial 4 - cylinder water cooled turbo charged with 74
gross HP, Tier 4 Final, dual element air cleaner, spin-on filters, water separator,
thermostart assist.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 of 6 409 USD Price Page
409 COMPACT WHEEL LOADER U.S. DOLLAR PRICE
PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 01, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
YELLOW
SERIES
SALES
CODE ITEM
6643 409 Compact Wheel Loader Base Machine - 74 HP Gross, 4 Cylinder, Turbo ���� ���� ����
406A535 Dunlop 335/80 R20 SPT 9 ����
406A537 Dunlop 405/70 R20 SPT 9 ���� ����
406B705 Cab - High Spec with Sliding Door Window ���� ����
406B712 Canopy - Four Pillars, No Glass ����
406C750 Heaterless - Canopy Only ����
406C752 Heater and Air Conditioning (for Use with Full Cab Only) ���� ����
406D709 12.5 Mph Standard Front Differential and Limited Slip Rear Axles ����
406D710 12.5 Mph Limited Slip Differential Front and Rear Axles ����
406D713 25 Mph Limited Slip Differential Front and Rear Axles ����
406E704 3 Spool Servo Joystick Control ���� ����
406E706 4 Spool servo joystick control with motor relief spool (hydraulic over-run) ����
406F727 Operators Handbook / Manual Pack - English. Includes Reverse Alarm ���� ���� ����
406G202 Quickhitch - JCB Hydraulic Locking. Medium Zettelmeyer type ���� ���� ����
406H099 GP Loader Bucket 1.3 cu yd with Bolt-on-Edge 76" (1950mm) Wide ���� ���� ����
406N755 Under Hood Isolator ���� ����
406N762 Radio Installation Kit - High spec cabs only. Includes speakers and wiring (Excludes Radio) ����
406N768 Worklights - Front & Rear (2) for Machines Equipped with Cab Heater Only. ����
406N769 Worklights - Front & Rear (2) for Machines Equipped with Air Conditioning. ���� ����
406R100 Interior Mirror ����
406R756 Storage Box - In Cab ����
406R763 Tilt and Slide Steering Column ���� ����
406R766 Creep speed, includes hand throttle for high flow (AC builds) ����
406R769 Engine Cold Start Grid Heater ���� ����
406R771 Engine Block Heater - 110v ���� ����
406R775 Smooth Ride System - Loader Control ����
406T761 Bucket Level Indicator ���� ����
406T771 High Flow Hydraulics for creep speed. Includes Constant Flow, 110lpm/29.0gpm (83lpm/21.9gpm as standard) ����
SUGGESTED LIST PRICE $73,368 $87,736 $99,271
Canopy CabHigh Spec,
High Speed
Select one of the following machine PACKAGE BUILD codes. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may befitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 409 USD Price Page
409 COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SALES U.S.
CODE ITEM LIST
BASE MACHINE
6643 409 Compact Wheel Loader Base Machine - 74 HP Gross, 4 Cylinder, Turbo $40,641
TIRES INCLUDING RIMS (A)
406A117 Michelin 400/70 R20 Bibload $9,218
406A535 Dunlop 335/80 R20 SPT 9 $6,350
406A536 Dunlop 365/80 R20 SPT 9 $6,924
406A537 Dunlop 405/70 R20 SPT 9 $8,038
406A544 Michelin 380/75 R20 XMCL $7,123
406A547 Michelin 400/70 R20 XMCL $7,184
406A549 Nokian 340/80 R18 TRI 2 $10,925
406A550 Nokian 360/80 R20 TRI 2 $10,850
OPERATORS AREA (B)
406B701 Cab - Low Spec with RH Ajar Window $7,967
406B702 Cab - High Spec with RH Ajar Window $8,552
406B704 Cab - Low Spec with Sliding Door Window $8,233
406B705 Cab - High Spec with Sliding Door Window $8,857
406B712 Canopy - Four Pillars, No Glass $1,410
CAB CONDITIONING SYSTEMS (C)
406C750 $0
406C751 $717
406C752 $4,103
TRANSMISSION AND AXLES (D)
406D709 12.5 Mph Standard Front Differential and Limited Slip Rear Axles $13,584
406D710 12.5 Mph Limited Slip Differential Front and Rear Axles $13,823
406D711 12.5 Mph Axles with Differential Locking and LSD Rear $14,345
406D712 25 Mph Standard Front Differential and Limited Slip Rear Axles $18,668
406D713 25 Mph Limited Slip Differential Front and Rear Axles $18,909
406D714 25 Mph Axles with Differential Locking and LSD Rear $19,430
AUXILIARY HYDRAULICS (E)
406E117 3 Spool Servo Control for Difflock $5,930
406E118 4 Spool Servo Control for Difflock $6,561
406E119 4 Spool servo joystick control with motor relief spool (hydraulic over-run) for diff lock $7,401
406E704 3 Spool Servo Joystick Control $5,930
406E705 4 Spool Servo Joystick Control $6,561
406E706 4 Spool servo joystick control with motor relief spool (hydraulic over-run) $7,401
OPERATORS MANUAL (F)
406F444 Operators Manual - French Canadian. Includes Reverse Alarm $0
406F727 Operators Handbook / Manual Pack - English. Includes Reverse Alarm $0
HYDRAULIC QUICKHITCH (G)
406G202 Quickhitch - JCB Hydraulic Locking. Medium Zettelmeyer type $2,998
406G203 Quick Coupler Ready $1,885
406G212 Hydraulic Skid Steer Loader Hitch (409) $2,998
Heaterless - Canopy Only
Heater and Air Conditioning (for Use with Full Cab Only)
Heater for Use with Full Cab Only
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
All prices and specifications subject to change without notice page 4 of 6 409 USD Price Page
409 COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
CAB AND OPERATOR STATION OPTIONS
406N750 Rotating Beacon $94
406N755 Under Hood Isolator $0
406N762 Radio Installation Kit - High spec cabs only. Includes speakers and wiring (Excludes Radio) $97
406N767 Worklights Front (2) $94
406N768 Worklights - Front & Rear (2) for Machines Equipped with Cab Heater Only. $245
406N769 Worklights - Front & Rear (2) for Machines Equipped with Air Conditioning. $245
406N774 Reverse Lights x 2 $72
406N779 2x front and 2x rear LED cab worklights (For non AC builds) $650
406N780 2x front and 2x rear LED cab worklights (For AC builds) $650
406R100 Interior Mirror $24
406R750 Front Screen Guard $2,593
406R752 Head Lamp Guards $169
406R756 Storage Box - In Cab $525
406R757 In cab document box for operator manual $274
406R763 Tilt and Slide Steering Column $265
406R778 Air Suspension Seat $1,149
406R779 L/H Arm Rest for KAB Seat $112
406R780 Seat, Back Extension - KAB $139
406S753 Fire Extinguisher (4.4 lbs Capacity) $178
HYDRAULICS AND OTHER MACHINE OPTIONS
406R775 Smooth Ride System - Loader Control $1,592
406R764 Creep speed, includes hand throttle for high flow (Heater builds) $1,303
406R766 Creep speed, includes hand throttle for high flow (AC builds) $1,303
406R769 Engine Cold Start Grid Heater $212
406R771 Engine Block Heater - 110v $206
406R781 Creep speed, includes hand throttle for high flow (Heater builds) $1,303
406R783 Creep speed, includes hand throttle for high flow (AC builds) $1,303
406S750 Hydraulic tank cap locking plates $22
406S758 Rockinger Tow Hitch with 12V electrics. 7700lbs $1,202
406T757 Auxiliary Relief Valve 4 Spool Manual Control $199
406T758 Auxiliary Relief Valve 3 Spool Servo Control $102
406T759 Auxiliary Relief Valve 4 Spool Servo Control $199
406T761 Bucket Level Indicator $111
406T763 High Flow Hydraulics (Includes Constant Flow) $1,631
406T764 Constant Flow Hydraulics. 4 spool only $285
406T766 Rear Hydraulic Circuit $572
406T770 Constant flow hydraulics, uni direction for servo controls $285
406T771 High Flow Hydraulics for creep speed. Includes Constant Flow, 110lpm/29.0gpm (83lpm/21.9gpm as standard) $1,631
Select Optional Equipment as desired within limitations if indicated
All prices and specifications subject to change without notice page 5 of 6 409 USD Price Page
409 COMPACT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
QUICKHITCH LOADER BUCKETS (MEDIUM ZETTELMEYER TYPE)
406H099 GP Loader Bucket 1.3 cu yd with Bolt-on-Edge 76" (1950mm) Wide $2,210
406H796 GP Bucket 1.3 cu yd - includes Bolt-on-Edge. 1950MM/77" Wide $3,530
406H802 6 in 1 Bucket 1.2 cu yd with Bolt-on-Edge 76" (1950mm) Wide $7,350
406H810 Light Duty Material Bucket 1.8 cu yd with Bolt-On Edge $3,834
406H811 Light Duty Material Bucket 2.0 cu yd with Bolt-On Edge $4,289
OTHER ATTACHMENTS (MEDIUM ZETTELMEYER TYPE)
406H809 42" Forks and Fork Frame (53" Wide) $1,840
406H790 47" Forks and Fork Frame (53" Wide) $1,864
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 409 USD Price Page
2018
JCB WHEEL LOADER
411 HT
EFFECTIVE: JANUARY 01, 2018ISSUE 1.0
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
411 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic and
fuel tanks with convenient cleanout ports. Front fenders. Side panels and rear engine access with gas
assisted struts. Articulation locking strut for transporting.
ENGINE JCB EcoMax 4.4 L (269 CID) 4-cylinder turbo-charged, water-cooled, direct injection engine.
109 gross HP (Tier 4 Final), cyclonic air pre cleaner with scavenger system, single element air filter,
spin-on filters, injection with water separator, variable speed cooling fan, wide core radiators, single
faced cooling pack, thermostart assist and antifreeze to -33 degrees. Selective catalytic converter
(SRS) after treatment.
TRANSMISSION Fully automatic powershift transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control switch on hydraulics
control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.
Transmission underbelly guard for added protection.
TIRES Several types available, see section 2.
FRONT/REAR AXLE Torque proportioning differentials with outboard planetaries. Optional limited slip differentials available
for superior traction performance.
SERVICE BRAKES Oil immersed and inboard mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission
output shaft.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
100 amp alternator with 2 heavy duty low maintenance batteries rated at 900 CCA. Battery disconnect
switch located in battery compartment. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Center mounted instrument panel with analog digital display gauges (speedometer, fuel, coolant
temperature, transmission temperature, hydraulic temperature) and full color LCD screen providing
selectable machine and operator menus. Screen also provides service diagnostic information.
Parking brake "on" warning light.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 68 dB(a) internal noise level
(SAE J2105) Dual exterior side view heated mirrors, two interior rear view mirrors, headrest
and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.
Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes
two headlights, two front and two rear worklights, and cab mounted flashing beacon. Operator's manual.
Roof mounted switch bank for accessory controls.
HYDRAULICS Tandem gear pump providing an efficient responsive distribution of power with 32.4 GPM.
Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic circuit as standard.
Single control lever for lift and tilt functions. Priority steering valve for improved handling and safety
and emergency steer back-up
LOADER Parallel lift loader end with a general purpose bucket (see Options, Section 3). Four cylinder geometry
for high torque and capacity. Two lift and two tilt cylinders. Return to dig and height kickout. Lift ram
safety strut.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and modernized fleet control.
WARRANTY 3 Year full coverage warranty (please see the machine warranty certificate for details)
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 411HT USA Price Page
411 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 01, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES 411T(A) 411T(B)CODE ITEM STD SPEC HIGH SPEC
411T 411 HT Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) ���� ����
600A703 Michelin XTLA 15.5 R25 L2 ����
600A722 Goodyear SGL 15.5-25 12 PLY ����
600B019 Standard Full Cab Sliding / Tinted Glass ����
600B020 High Spec Full Cab - Sliding / Tinted Glass ����
600C010 Full Cab Heater & Air Conditioning ����
600C011 Full Cab Climate Control - ATC ����
600D356 25 MPH LSD Axles, Mechanical Park Brake, Full Fender Coverage ����
600D357 25 MPH LSD Axles, Electrical park brake, Full fender Coverage ����
600E136 Standard Height Arm, 3 Spool Joystick Controls, Parallel Lift ����
600F251 Language pack: North American ����
600G019 Front Light Guards - Box Protection ����
600H006 Smooth Ride System ����
600H010 Hydraulic Reversing Fan ����
600J350 GP Bucket - 1.4cum/1.8cuyd shovel, with toeplate ����
600J579 Industrial Quick Hitch, 3 Spool HYD Raulics - 3/4" Aux Pipework + Hoses ����
600R018 Mid Spec worklights - 4 front, 2 rear, 2 on counterweight, halogen ����
$149,937 $159,078SUGGESTED LIST PRICE
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 411 HT USA Price Page
411 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
BASE MACHIN
411T 411 HT Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) $104,945
TIRES INCLUDING RIMS
600A702 Michelin XHA 15.5 R25 L3 $9,038
600A703 Michelin XTLA 15.5 R25 L2 $8,244
600A705 Michelin X Snoplus 17.5R25 L2 $13,189
600A706 Michelin XHA 17.5 R25 L3 $10,886
600A722 Goodyear SGL 15.5-25 12 PLY $6,298
600A723 Goodyear SGL 15.5-25 16 PLY $8,102
OPERATORS AREA
600B019 Standard Full Cab Sliding / Tinted Glass $4,400
600B020 High Spec Full Cab - Sliding / Tinted Glass $7,218
CAB CONDITIONING SYSTEMS
600C010 Full Cab Heater & Air Conditioning $4,714
600C011 Full Cab Climate Control - ATC $5,517
TRANSMISSION AND AXLES
600D348 25 MPH Standard Axles, Mechanical Park Brake, Full Fender Coverage $10,848
600D356 25 MPH LSD Axles, Mechanical Park Brake, Full Fender Coverage $13,971
600D357 25 MPH LSD Axles, Electrical park brake, Full fender Coverage $15,149
LOADER ARMS & AUXILIARY HYDRAULIC
600E135 Standard Height Arm, 3 Spool Multilever Controls, Parallel Lift $1,739
600E136 Standard Height Arm, 3 Spool Joystick Controls, Parallel Lift $1,663
600E137 Standard Height Arm, 4 Spool Multilever Controls, Parallel Lift $2,401
600E138 Standard Height Arm, 4 Spool Joystick Controls, Parallel Lift $2,296
MANUALS
600F207 Operators Handbook and Manual Pack, English $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code
All prices and specifications subject to change without notice page 4 411HT USA Price Page
411 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATOR AND CAB OPTIONS
600H041 Electric in-cab coolbox $629
600R001 Carbon Filter - Cab Air Intake $177
600R018 Mid Spec Work Lights - 4 Front 4 Rear - Halogen $352
600R019 High Spec Work Lights - 4 Front 4 Rear - LED $2,238
600R020 360 Degree Worklights - 6 Front 6 Rear - LED $3,213
600R042 Hi-vis seatbelt - 2 inch only. Orange $119
600R034 Deluxe Seat - 3" Seatbelt $685
600R035 Super Deluxe Seat - 3" Seatbelt $1,240
MACHINE PROTECTION OPTIONS
600G003 Fuel hose guard $115
600G005 Front Screen Guard $2,244
600G006 Rear light guards $540
600G007 Front Light Guards $143
600G019 Front Light Guards - Box Protection $111
HYDRAULIC AND OTHER MACHINE OPTIONS
600H006 Smooth Ride System $4,504
600H010 Hydraulic Reversing Fan $2,156
600H023 Auto grease system $6,283
600H025 ARV Kit - 3 Spool $445
600H026 ARV Kit - 4 Spool $893
600J019 Quickhitch ready - 3 spool hydraulics $1,843
600J020 Quickhitch ready - 4 spool hydraulics $1,843
600J579 Industrial Quick Hitch, 3 Spool HYD Raulics - 3/4" Aux Pipework + Hoses $3,667
600P006 Transmission Cooler Bypass $850
600R030 Smart Reverse Alarm - 112DB $250
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5] 411 HT USA Price Page
411 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
JCB QUICKHITCH LOADER BUCKETS - ENSURE QUICK HITCH IS ORDERED
600J347 Quick Hitch Mounted 1.6 Cu Yd Shovel with Toeplate $4,868
600J350 Quick Hitch Mounted 1.8 Cu Yd Shovel with Toeplate $5,665
JCB DIRECT MOUNTED LOADER BUCKETS (NOT for use with Quickhitch)
600H344 Pin Mounted 1.6 cu Yd Shovel, with Toeplate $4,868
600H347 Pin Mounted 1.8 cu Yd Shovel, with Toeplate $5,665
OTHER ATTACHMENTS, QUICKHITCH TYPE
600J343 Pallet Forks & Carrier 47" Tine Length. 79" Carriage Width $5,927
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 411HT USA Price Page
2018
JCB WHEEL LOADER
417 HT
EFFECTIVE: JANUARY 01, 2018ISSUE 1.0
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
417 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic
and fuel tanks with convenient cleanout ports. Front and rear fenders with coverage that
accomodate all tire options. One piece rear hood with gas assisted struts provides excellent
service access to engine. Articulation locking strut for transportation.
ENGINE JCB EcoMax 4.4 L (269 CID) 4-cylinder turbo-charged, water-cooled, direct injection engine.
125 gross HP (Tier4F), cyclonic air pre cleaner with scavenger system, single element air filter,
spin-on filters, injection with water separator, variable speed cooling fan, wide core radiators, single
faced cooling pack, thermostart assist and antifreeze to -33 degrees. Selective catalytic converter
(SCR) after treatment
TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control switch on hydraulics
control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.
Transmission underbelly guard for added protection.
TIRES Several types available, see section 2.
FRONT/REAR AXLE Torque proportioning differentials with outboard planetaries. Optional limited slip differentials available for superior traction performance.
SERVICE BRAKES Oil immersed and inboard mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission
output shaft.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
100 amp alternator with 2 heavy duty low maintenance batteries rated at 900 CCA. Battery disconnect
switch located at cab steps. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Audible and visual engine and powertrain warning system with front mounted instrument panel including
speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature gauge,
clock and auto emergency engine shut-down system. Parking brake "on" warning light & audible alarm.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 68 dB(a) internal noise level
(SAE J2105) Dual exterior side view heated mirrors, two interior rear view mirror, headrest
and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.
Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes
two headlights, two front and two rear worklights, two tail lights, reverse light, turn signals and
cab mounted flashing beacon. Operator's manual. Roof mounted switch bank for accessory controls.
HYDRAULICS Variable displacement piston pump providing an efficient distribution of power with 41 GPM. Load
sensing hydraulics. Two spool loader circuit with accumulator backup. Standard 3rd spool auxiliary
hydraulic circuit. Single control lever for lift and tilt functions. Priority steering valve for improved
handling and safety. Electrically driven emergency steer pump.
LOADER Parallel lift loader end with a general purpose bucket (see Options, Section 3). Four cylinder geometry
for high torque and capacity. Two lift and two tilt cylinders. Return to dig and height kickout. Lift
cylinder safety strut.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
WARRANTY 3 Year full coverage warranty (please see the machine warranty certificate for details)
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 417HT USA Price Page
417 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 01, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
*JCB BRANDED RADIAL FITTED TO PACKAGE BUILDS
SALES 411T(A) 411T(B)CODE ITEM STD SPEC HIGH SPEC
417T 417 HT Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) ���� ����
600A711 Michelin XTLA 17.5 R25 L2 ����
600A724 Goodyear SGL 17.5-25 12 PLY ����
600B019 Standard Full Cab Sliding / Tinted Glass ����
600B020 High Spec Full Cab - Sliding / Tinted Glass ����
600C018 Full Cab Heater & Air Conditioning ����
600C019 Full Cab Climate Control - ATC ����
600D461 25 MPH LSD Axles, Mechanical Park Brake, Full Fender Coverage ����
600D462 25 MPH LSD Axles, Electric Park Brake, Full Fender Coverage ����
600E160 Standard Height Arm, 3 Spool Joystick Controls, Parallel Lift ���� ����
600F207 Operators Handbook and Manual Pack, English ���� ����
600G019 Front Light Guards - Box Protection ����
600H006 Smooth Ride System ���� ����
600H012 Hydraulic Reversing Fan ����
600J368 Quick Hitch Mounted 2.1 Cu Yd Shovel with Toeplate ���� ����
600J582 Industrial Quick Hitch for Standard and High Lift Arms with 0.75" Aux Pipework and Hoses ���� ����
600R018 Mid Spec worklights - 4 front, 2 rear, 2 on counterweight, halogen ����
SUGGESTED LIST PRICE $162,649 $172,792
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 of 6 417HT USA Price Page
417 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE
417T 417 HT Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) $114,316
TIRES INCLUDING RIMS
600A710 Michelin XHA 17.5 R25 L3 $12,472
600A711 Michelin XTLA 17.5 R25 L2 $10,886
600A712 Michelin X Snoplus 17.5R25 L2 $12,374
600A720 Michelin XLD 550/65R25 L3 $17,089
600A724 Goodyear SGL 17.5-25 12 PLY $7,651
600A725 Goodyear HRL 17.5-25 16 PLY $9,593
600A730 SG Revolution DWL 17.5-25 Semi Solid Tires $21,875
600A735 JCB Earthmover 17.5 R25 L3 $13,206
600A736 JCB Sitemaster 17.5-25 L3 $10,647
OPERATORS AREA
600B019 Standard Full Cab Sliding / Tinted Glass $4,400
600B020 High Spec Full Cab - Sliding / Tinted Glass $7,218
CAB CONDITIONING SYSTEMS
600C018 Full Cab Heater & Air Conditioning $4,691
600C019 Full Cab Climate Control - ATC $5,489
TRANSMISSION AND AXLES
600D459 25 MPH Standard Axles, Mechanical Park Brake, Full Fender Coverage $11,227
600D461 25 MPH LSD Axles, Mechanical Park Brake, Full Fender Coverage $14,463
600D462 25 MPH LSD Axles, Electric Park Brake, Full Fender Coverage $15,358
LOADER ARMS & AUXILIARY HYDRAULICS
600E159 Standard Height Arm, 3 Spool Multilever Controls, Parallel Lift $1,790
600E160 Standard Height Arm, 3 Spool Joystick Controls, Parallel Lift $1,790
600E167 High Lift Arm, 3 Spool Multilever Controls, Parallel Lift $8,308
600E168 High Lift Arm, 3 Spool Joystick Controls, Parallel Lift $8,308
600E170 High Lift Arm, 4 Spool Joystick Controls, Parallel Lift $9,496
600E175 Super High Lift Arm, 3 Spool Multilever Controls, Parallel Lift $9,924
600E176 Super High Lift Arm, 3 Spool Joystick Controls, Parallel Lift $9,924
MANUALS
600F207 Operators Handbook and Manual Pack, English $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
All prices and specifications subject to change without notice page 4 417HT USA Price Page
417 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATOR AND CAB OPTIONS
600H041 Electric in-cab coolbox $629
600R001 Carbon Filter - Cab Air Intake $177
600R018 Mid Spec Work Lights - 4 Front 4 Rear - Halogen $352
600R019 High Spec Work Lights - 4 Front 4 Rear - LED $2,238
600R020 360 Degree Worklights - 6 Front 6 Rear - LED $3,213
600R030 Smart Reverse Alarm - 112DB $250
600R034 Deluxe Seat - 3" Seatbelt $685
600R035 Super Deluxe Seat - 3" Seatbelt $1,240
600R042 Hi-vis seatbelt - 2 inch only. Orange $119
MACHINE PROTECTION OPTIONS
600G003 Fuel hose guard $115
600G005 Front Screen Guard $2,244
600G006 Rear light guards $540
600G007 Front Light Guards $143
600G019 Front Light Guards - Box Protection $111
HYDRAULIC AND OTHER MACHINE OPTIONS
600H006 Smooth Ride System $4,504
600H012 Hydraulic Reversing Fan $2,156
600H020 Autogreasing system - Compatible with standard wheels and tires for high lift $6,283
600H021 Autogreasing system - Compatible with large wheels and tires for high lift $6,283
600H023 Auto grease system $6,283
600H027 ARV Kit - 3 Spool $445
600H028 ARV Kit - 4 Spool $893
600J023 Quickhitch ready - For standard and high lift arms $1,843
600J024 Quickhitch ready - For super high lift arms $1,843
600J582 Industrial Quick Hitch for Standard and High Lift Arms with 0.75" Aux Pipework and Hoses $4,776
600J583 Industrial Quick Hitch for Super and High Lift Arms with 0.75" Aux Pipework and Hoses $4,776
600P006 Transmission Cooler Bypass $850
600T035 Non-parallel linkage kit - Provides best material retention for free flowing materials $1,004
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 417HT USA Price Page
417 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
JCB QUICKHITCH LOADER BUCKETS - ENSURE QUICK HITCH IS ORDERED
600J347 Quick Hitch Mounted 1.6 Cu Yd Shovel with Toeplate $5,927
600J350 Quick Hitch Mounted 1.8 Cu Yd Shovel with Toeplate $4,868
600J368 Quick Hitch Mounted 2.1 Cu Yd Shovel with Toeplate $5,665
JCB DIRECT MOUNTED LOADER BUCKETS (NOT FOR USE WITH QUICKHITCH)
600H344 Pin Mounted 1.6 cu Yd Shovel, with Toeplate $4,868
600H347 Pin Mounted 1.8 cu Yd Shovel, with Toeplate $5,665
600H350 Pin Mounted 2.1 cu Yd Shovel, with Toeplate $6,127
OTHER ATTACHMENTS, QUICKHITCH TYPE
600J343 Pallet Forks & Carrier 47" Tine Length. 79" Carriage Width $5,927
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 417HT USA Price Page
2018
JCB WHEEL LOADER
427 HT
EFFECTIVE: JANUARY 01, 2018ISSUE 1.0
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
427 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
STANDARD EQUIPMENT
GENERAL
ENGINE
TRANSMISSION
TIRES Several types available, see section 2.
FRONT/REAR AXLE
SERVICE BRAKES
ELECTRICS
INSTRUMENTS
CAB UNIT
HYDRAULICS
LOADER
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
WARRANTY 3 Year full coverage warranty (please see the machine warranty certificate for details)
Audible and visual engine and powertrain warning system with front mounted instrument panel including
speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature gauge,
clock and automatic emergency engine shut-down system. Parking brake "on" warning light.
SAE certified ROPS/FOPS fully enclosed pressurized cab with 68 dB(a) internal noise level (SAE J2105)
Dual heated exterior side view mirrors, two interior rear view mirrors, headrestand sun visor. Fully
adjustable cloth suspension seat with 3 inch seat belt and left, two headlights, two front worklights, two
tail lights, turn signals and cab mounted flashing beacon.Heater/defroster, windshield wiper/washer,
radio provision with speakers. Lighting package includes hand armrest.
Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and
responsive distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary
hydraulic circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for
improved handling and safety and an electric emergency steering pump..
Parallel lift loader end with a general purpose bucket (see Options, Section 3). Four cylinder geometry for
high torque and capacity. Two lift and two tilt cylinders. Return to dig and height kickout. Lift ram safety
strut.
Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic
and fuel tanks with convenient cleanout ports. Front fenders. Side panels and rear engine access
electricallyassisted struts. Articulation locking strut for transporting
6.7 L (409 CID) 6-cylinder, 179 Gross HP Cummins QSB diesel, T4 Final, variable geometry
turbocharger, diesel oxidation catalyst, exhaust gas reciruculation, air scavenge system, low idle feature
dual element air cleaner, spin-on filters, water separator, thermostart assist and antifreeze to -33
degrees.
Full powershift automatic transmission with torque converter. Four forward and three reverse gears with
a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gearselection
with transmission kickdown button. Forward and control lever. Selectable transmission disconnect on
brake pedal and hydraulics control lever.reverse control switch on hydraulics. Transmission underbelly
guard for added protection
Standard limited slip differentials for superior traction performance. Optional open differentials with
automatic differential locking. All axle types include sinter-lined pads to provide increased resistance to
heat and wear with the multi-disc brake system.
Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to provide
stopping ability in all conditions. Mechanical disc parking brake operating on the transmission output
shaft.
24 volt, IP 67 water and dust resistant connectors with numerical coded wiring. 120 amp alternator with 2
heavy duty low maintenance batteries rated at 900 CCA. Battery disconnect switch located in battery
compartment. Electrical circuit test button. Back-up Alarm.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 427 HT USA Price Page
427 HT WHEEL LOADER U.S. DOLLAR PRICE PAGES F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 01, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
427T(A) 427T(B)SALES STD SPEC HIGH SPEC
CODE ITEM
427T 427 HT Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) ���� ����
600A683 JCB Earthmover Radial 20.5 R25 L3 Machine Width: 102.3" ���� ����
600B015 Standard Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat ����
600B016 High Spec Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat, Reverse Cam ����
600C006 Full Cab Heater & Air Conditioning ����
600C007 Full Cab Climate Control ����
600D149 Limited Slip Axles, 4 Speed, 20.5, Half Rear ����
600D192 Limited Slip Axles, SINT, HD, 4 Speed, 20.5 , Full Rear ����
600E064 4 Speed, Standard Height Loader Arm, 3 Spool Joystick Hydaulics, Parallel Lift ���� ����
600F056 Operators Handbook and Manual Pack, English ���� ����
600J005 Industrial Quickhitch With Pin Isolator Valve. 427HT and 437HT Std Arms ���� ����
600J362 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount ���� ����
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) ����
600T010 Swing Out Reverse Fan ����
600T301 Smooth Ride System ���� ����
SUGGESTED LIST PRICE $181,444 $188,912
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may befitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 427 HT USA Price Page
427 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE
427T 427 HT Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) $140,363
TIRES INCLUDING RIMS
600A651 Michelin XTLA 20.5 R25 L2 Machine Width: 97.7" $9,624
600A652 Michelin XHA 20.5 R25 L3 Machine Width: 97.7" $11,530
600A654 Michelin XMINED2 20.5 R25 L5 Machine Width: 97.7" $18,282
600A656 Michelin XSNOPLUS 20.5 R25 L2 Machine Width: 97.7" $11,580
600A671 Goodyears HRL 20.5-25 L3 Cross Ply. 16 Ply $8,758
600A674 Goodyear SGL 20.5-25 12 PR L2 Machine Width: 97.7" $8,273
600A681 JCB Sitemaster 20.5-25 L3 Cross Ply. 16 Ply $6,283
600A683 JCB Earthmover Radial 20.5 R25 L3 Machine Width: 102.3" $7,794
600A685 SG Revolution SE 20.5R25: Solid Cusion Tires (Aggressive Tread) $19,245
600A686 SG Revolution S2 C2 DWL 20.5R25: Solid Cusion Tires (Smooth Tread) $17,674
600A701 Michelin XLD 650/65R25 L3 $14,135
OPERATORS AREA
600B015 Standard Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat $3,752
600B016 High Spec Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat, Reverse Cam $6,153
CAB CONDITIONING SYSTEMS
600C006 Full Cab Heater & Air Conditioning $2,980
600C007 Full Cab Climate Control $3,829
600C009 Full Cab Climate Control - Epoxy Coated $4,219
TRANSMISSION AND AXLES
600D067 Std Axles, 4 Speed, 20.5, Half Rear $8,266
600D109 Std Axles, SINT, HD, 4 Speed, 20.5, Half Rear $8,812
600D110 Std Axles, SINT, HD, 4 Speed, 20.5, Full Rear $9,280
600D111 Std Axles, SINT, HD, 4 Speed, 620 Full Rear $9,280
600D120 Std Axles, SINT, HD, 5 Speed LUC2-5, 20.5, Full Rear $9,280
600D121 Std Axles, SINT, HD, 5 Speed LUC2-5, 620 Full Rear $9,280
600D149 Limited Slip Axles, 4 Speed, 20.5, Half Rear $8,685
600D150 Limited Slip Axles, 4 Speed, 20.5 , Full Rear $9,153
600D170 Limited Slip Axles, SINT, 4 Speed, 20.5 , Full Rear $11,620
600D191 Limited Slip Axles, SINT, HD, 4 Speed, 20.5 , Half Rear $11,152
600D192 Limited Slip Axles, SINT, HD, 4 Speed, 20.5 , Full Rear $11,620
600D193 Limited Slip Axles, SINT, HD, 4 Speed, 620 Full Rear $11,620
600D202 Limited Slip Axles, SINT, HD, 5 Speed LUC2-5, 20.5, Full Rear $18,262
600D203 Limited Slip Axles, SINT, HD, 5 Speed LUC2-5, 620 Full Rear $18,262
600D232 Auto Lock Front Axle, Std Rear, SINT, HD, 4 Speed 20.5, Full Rear $12,712
600D233 Auto Lock Front Axle, Std Rear, SINT, HD, 4 Speed, 620 Full Rear $12,712
600D474 Auto Lock Front Axle, Std Rear, SINT, HD, 5 Speed LUC2-5, 20.5, Half Rear $16,660
600D475 Auto Lock Front Axle, Std Rear, SINT, HD, 5 Speed LUC2-5, 20.5, Full Rear $17,444
LOADER ARMS & AUXILIARY HYDRAULICS
600E064 4 Speed, Standard Height Loader Arm, 3 Spool Joystick Hydaulics, Parallel Lift $2,349
600E065 4 Speed, Standard Height Loader Arm, 3 Spool Multi Lever Hydraulics, Parallel Lift $2,349
600E066 4 Speed, Standard Height Loader Arm, 4 Spool Joystick Hydraulics, Parallel Lift $2,751
600E067 4 Speed, Standard Height Loader Arm, 4 Spool Multi Lever Hydraulics, Parallel Lift $2,751
600E068 4 Speed, High Lift Loader Arm, 3 Spool Joystick Hydraulics, Parallel Lift $4,189
600E069 4 Speed, High Lift Loader Arm, 3 Spool Multi Lever Hydraulics, Parallel Lift $4,189
600E070 4 Speed, High Lift Loader Arm, 4 Spool Joystick Hydraulics, Parallel Lift $4,590
600E071 4 Speed, High Lift Loader Arm, 4 Spool Multi Lever Hydraulics, Parallel Lift $4,590
600E088 5 Speed, Standard Height Loader Arm, 3 Spool Joystick Hydraulics, Parallel Lift $2,349
600E089 5 Speed, Standard Height Loader Arm, 3 Spool Multi Lever Hydraulics, Parallel Lift $2,349
600E090 5 Speed, Standard Height Loader Arm, 4 Spool Joystick Hydraulics, Parallel Lift $2,751
600E091 5 Speed, Standard Height Loader Arm, 4 Spool Multi Lever Hydraulics, Parallel Lift $2,751
600E092 5 Speed, High Lift Loader Arm, 3 Spool Joystick Hydraulics, Parallel Lift $4,189
600E093 5 Speed, High Lift Loader Arm, 3 Spool Multi Lever Hydraulics, Parallel Lift $4,189
600E094 5 Speed, High Lift Loader Arm, 4 Spool Joystick Hydraulics, Parallel Lift $4,590
600E095 5 Speed, High Lift Loader Arm, 4 Spool Multi Lever Hydraulics, Parallel Lift $4,590
MANUALS
600F056 Operators Handbook and Manual Pack, English $0
600F060 Operators Handbook and Manual Pack, French $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
All prices and specifications subject to change without notice page 4 427 HT USA Price Page
427 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
JCB QUICKHITCH LOADER BUCKETS - ENSURE QUICK HITCH IS ORDERED
600J360 GP Bucket - 2.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $5,468
600J361 GP Bucket - 2.7 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $5,875
600J362 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $6,814
600J366 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $7,484
JCB DIRECT MOUNTED LOADER BUCKETS (NOT FOR USE WITH QUICKHITCH)
600H359 GP Bucket - 2.5 cu.yd. w/ Bolt-on Cutting Edge $5,469
600H360 GP Bucket - 2.7 cu.yd. w/ Bolt-on Cutting Edge $5,469
600H361 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge $5,851
600H362 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge $6,807
OTHER ATTACHMENTS, QUICKHITCH TYPE
600J406 Pallet Forks and Carrier, 78" (2000 mm) wide $2,616
600J412 Fork and Frame 59" (1500 mm) Wide w/ Parallel Lift $5,053
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 427 HT USA Price Page
427 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY
01, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATOR AND CAB OPTIONS
600R026 In Cab Floor Carpet $471
600R027 In Cab Cool Box $629
600R028 360 Degree work lights (All LED) 6 front, 6 rear, 2 in grill $2,573
600R042 Hi-vis seatbelt - 2 inch only. Orange $119
600R001 Carbon Filter - Cab Air Intake $177
600R005 Deluxe Fabric Seat - 3" Seatbelt $585
600R006 Super Deluxe Fabric Seat - 3" Seatbelt $1,057
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) $227
600R015 LED Worklights - cab mounted (provides a total of 4 Front, 4 Rear on Cab and 2 Rear on Hood) $1,653
MACHINE PROTECTION OPTIONS
600R016 Windshield Guard - Front & Side $1,849
600S018 Front Light Guards $167
600S439 Rear Light Guards $673
600S025 Rear Grille Guard - Black 427 $1,868
HYDRAULIC AND OTHER MACHINE OPTIONS
600J005 Industrial Quickhitch With Pin Isolator Valve. 427HT and 437HT Std Arms $4,440
600J006 Industrial Quickhitch With Pin Isolator Valve. 427 HL $4,440
600J014 Quick Hitch Ready for standard arms $1,572
600J017 Quick Hitch Ready for high lift arms $1,572
600M004 Hydraulic Oil (Bio-degradable ) $2,901
600M007 Epoxy Coated Cooling Pack $946
600N001 Reverse Smart Alarm (82-112dba, 5 dba above ambient) $211600N009 Rear radar system (Compatible with rear guard) $4,598600N010 Rear radar system (Not compatible with rear guard) $4,598600N346 Electrical Connectors - Sealed $788600S027 Full Handrails 20.5 $853600S028 Full Handrails 620 Fenders $853600S029 Full Handrails 750 Fenders $853600T010 Swing Out Reverse Fan $1,057
600T100 Non Parallel Linkage Kit - 427 & 437 HT $0
600T101 Non Parallel Linkage Kit - 427 High Lift $0
600T301 Smooth Ride System $4,267
600T302 Transmission Cooler Bypass 427 & 437. 4 Speed Only. $579
600T463 Auxiliary Relief Valve for 3 spool $362
600T464 Auxiliary Relief Valve for 3 & 4 spool $772
600T541 Lift ram safety strut $163
600T592 Autogreasing system. Std arm, Non Parallel. Std tires $5,166
600T593 Autogreasing system. Std arm, Parallel. Std tires $5,166600T594 Autogreasing system. Std arm, Non Parallel. Wide tires $5,166600T595 Autogreasing system. Std arm, Parallel. Wide tires $5,166600T596 Autogreasing system. High lift arm, Non Parallel. Std tires $5,166600T597 Autogreasing system. High lift arm, Parallel. Wide tires $5,166600T604 Trailer Electrics - 12V $761600W016 Wastemaster Pack $4,184
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 427 HT USA Price Page
2018
JCB WHEEL LOADER
427 ZX
EFFECTIVE: JANUARY 01, 2018ISSUE 1.0
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
427 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic and
fuel tanks with convenient cleanout ports. Front fenders. Side panels and rear engine access with gas
assisted struts. Articulation locking strut for transporting.
ENGINE 6.7 L (409 CID) 6-cylinder, 179 Gross HP Cummins QSB diesel, T4 Final, variable geometry turbocharger,
diesel oxidation catalyst, exhaust gas reciruculation, air scavenge system, low idle feature dual element
air cleaner, spin-on filters, water separator, thermostart assist and antifreeze to -33 degrees.
TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control switch on hydraulics
control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.
Transmission underbelly guard added for protection.
TIRES Several types available. See Section 2.
FRONT/REAR AXLES Open differential with outboard planetaries. Optional limited slip differentials available
for superior traction performance. Optional open differentials with automatic differential locking.
All axle types include sinter-lined pads to provide increased resistance to heat
and wear with the multi-disc brake system.
SERVICE BRAKES Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission
output shaft.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
120 amp alternator with 2 heavy duty low maintenance batteries rated at 900 CCA. Battery disconnect
switch located in battery compartment. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Audible and visual engine and powertrain warning system with side mounted instrument panel
including speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature
gauge, clock and automatic emergency engine shut-down system. Parking brake "on" warning light.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 68 dB(a) internal noise level
(SAE J2105) Dual heated exterior side view mirrors, two interior rear view mirrors, headrest
and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.
Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes
two headlights, two front worklights, two tail lights, turn signals
and cab mounted flashing beacon. Operator's manual.
HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and
responsive distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic
circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for improved handling
and safety and an electric emergency steering pump.
LOADER
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and modernized
fleet control
WARRANTY 3 Year full coverage warranty (please see the machine warranty certificate for details)
Z-Bar loader end with a general purpose bucket (see buckets, Section 2). Z-Bar geometry for high
breakout torque and capacity. Two lift and one tilt cylinders. Return to dig and height kickout. Lift ram
safety strut.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 427 ZX USA Price Page
427 ZX WHEEL LOADER U.S. DOLLAR PRICE PAGES F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 01, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALESYELLOW
SERIES427Z(B)
CODE ITEM STD SPEC HIGH SPEC
427Z 427 ZX Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) ���� ����
600A683 JCB Earthmover Radial 20.5 R25 L3 Machine Width: 102.3" ���� ����
600B015 Standard Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat ����
600B016 High Spec Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat, Reverse Cam ����
600C006 Full Cab Heater & Air Conditioning ����
600C007 Full Cab Climate Control ����
600D149 Limited Slip Axles, 4 Speed, 20.5, Half Rear ����
600D192 Limited Slip Axles, SINT, HD, 4 Speed, 20.5 , Full Rear ����
600E029 4 Speed, Std. Height Loader Arm, 3 Spool Joystick Hydraulics ���� ����
600F056 Operators Handbook and Manual Pack, English ���� ����
600H368 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge ���� ����
600J018 Quickhitch ready ���� ����
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) ����
600T010 Swing Out Reverse Fan ����
600T301 Smooth Ride System ���� ����
SUGGESTED LIST PRICE $172,714 $180,182
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may befitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 427 ZX USA Price Page
427 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE
427Z 427 ZX Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) $134,455
TIRES INCLUDING RIMS
600A651 Michelin XTLA 20.5 R25 L2 Machine Width: 97.7" $9,624
600A652 Michelin XHA 20.5 R25 L3 Machine Width: 97.7" $11,530
600A654 Michelin XMINED2 20.5 R25 L5 Machine Width: 97.7" $18,282
600A656 Michelin XSNOPLUS 20.5 R25 L2 Machine Width: 97.7" $11,580
600A671 Goodyears HRL 20.5-25 L3 Cross Ply. 16 Ply $8,758
600A674 Goodyear SGL 20.5-25 12 PR L2 Machine Width: 97.7" $8,273
600A681 JCB Sitemaster 20.5-25 L3 Cross Ply. 16 Ply $6,283
600A683 JCB Earthmover Radial 20.5 R25 L3 Machine Width: 102.3" $7,794
600A685 SG Revolution SE 20.5R25: Solid Cusion Tires (Aggressive Tread) $19,245
600A686 SG Revolution S2 C2 DWL 20.5R25: Solid Cusion Tires (Smooth Tread) $17,674
600A701 Michelin XLD 650/65R25 L3 $14,135
OPERATORS AREA
600B015 Standard Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat $3,752
600B016 High Spec Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat, Reverse Cam $6,153
CAB CONDITIONING SYSTEMS
600C006 Full Cab Heater & Air Conditioning $2,980
600C007 Full Cab Climate Control $3,829
600C009 Full Cab Climate Control - Epoxy Coated $4,219
TRANSMISSION AND AXLES
600D067 Std Axles, 4 Speed, 20.5, Half Rear $8,266
600D109 Std Axles, SINT, HD, 4 Speed, 20.5, Half Rear $8,812
600D110 Std Axles, SINT, HD, 4 Speed, 20.5, Full Rear $9,280
600D111 Std Axles, SINT, HD, 4 Speed, 620 Full Rear $9,280
600D120 Std Axles, SINT, HD, 5 Speed LUC2-5, 20.5, Full Rear $9,280
600D121 Std Axles, SINT, HD, 5 Speed LUC2-5, 620 Full Rear $9,280
600D149 Limited Slip Axles, 4 Speed, 20.5, Half Rear $8,685
600D150 Limited Slip Axles, 4 Speed, 20.5 , Full Rear $9,153
600D170 Limited Slip Axles, SINT, 4 Speed, 20.5 , Full Rear $11,620
600D191 Limited Slip Axles, SINT, HD, 4 Speed, 20.5 , Half Rear $11,152
600D192 Limited Slip Axles, SINT, HD, 4 Speed, 20.5 , Full Rear $11,620
600D193 Limited Slip Axles, SINT, HD, 4 Speed, 620 Full Rear $11,620
600D202 Limited Slip Axles, SINT, HD, 5 Speed LUC2-5, 20.5, Full Rear $18,262
600D203 Limited Slip Axles, SINT, HD, 5 Speed LUC2-5, 620 Full Rear $18,262
600D232 Auto Lock Front Axle, Std Rear, SINT, HD, 4 Speed 20.5, Full Rear $12,712
600D233 Auto Lock Front Axle, Std Rear, SINT, HD, 4 Speed, 620 Full Rear $12,712
600D474 Auto Lock Front Axle, Std Rear, SINT, HD, 5 Speed LUC2-5, 20.5, Half Rear $16,660
600D475 Auto Lock Front Axle, Std Rear, SINT, HD, 5 Speed LUC2-5, 20.5, Full Rear $17,444
LOADER ARMS & AUXILIARY HYDRAULICS
600E027 4 Speed, Std. Height Loader Arm, 2 Spool Joystick Hydraulics (Not Compatible with QH) $1,531
600E028 4 Speed, Std. Height Loader Arm, 2 Spool Multi Lever Hydraulics (Not Compatible with QH) $1,531
600E029 4 Speed, Std. Height Loader Arm, 3 Spool Joystick Hydraulics $2,394
600E031 4 Speed, Std. Height Loader Arm, 3 Spool Multi Lever Hydraulics $2,394
600E032 4 Speed, Std. Height Loader Arm, 4 Spool Joystick Hydraulics $3,259
600E033 4 Speed, Std. Height Loader Arm, 4 Spool Multi Lever Hydraulics $3,259
600E106 5 Speed, Std. Height Loader Arm, 3 Spool Joystick Hydraulics $2,394
600E107 5 Speed, Std. Height Loader Arm, 3 Spool Multi Lever Hydraulics $2,394
600E108 5 Speed, Std. Height Loader Arm, 4 Spool Joystick Hydraulics $3,259
600E109 5 Speed, Std. Height Loader Arm, 4 Spool Multi Lever Hydraulics $3,259
MANUALS
600F056 Operators Handbook and Manual Pack, English $0
600F060 Operators Handbook and Manual Pack, French $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer
All prices and specifications subject to change without notice page 4 427 ZX USA Price Page
427 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATOR AND CAB OPTIONS
600R026 In Cab Floor Carpet $471
600R027 In Cab Cool Box $629
600R028 360 Degree work lights (All LED) 6 front, 6 rear, 2 in grill $2,573
600R042 Hi-vis seatbelt - 2 inch only. Orange $119
600R001 Carbon Filter - Cab Air Intake $177
600R005 Deluxe Fabric Seat - 3" Seatbelt $585
600R006 Super Deluxe Fabric Seat - 3" Seatbelt $1,057
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) $227
600R015 LED Worklights - cab mounted (provides a total of 4 Front, 4 Rear on Cab and 2 Rear on Hood) $1,653
MACHINE PROTECTION OPTIONS
600R016 Windshield Guard - Front & Side $1,849
600S018 Front Light Guards $167
600S439 Rear Light Guards $673
600S025 Rear Grille Guard - Black 427 $1,868
HYDRAULIC AND OTHER MACHINE OPTIONS
600J009 Industrial Quickhitch With Pin Isolator Valve. 427 ZX and 437 ZX $4,440
600J018 Quickhitch ready $1,572
600M004 Hydraulic Oil (Bio-degradable ) $2,901
600M007 Epoxy Coated Cooling Pack $946
600N001 Reverse Smart Alarm (82-112dba, 5 dba above ambient) $211
600N009 Rear radar system (Compatible with rear guard) $4,598
600N010 Rear radar system (Not compatible with rear guard) $4,598
600N346 Electrical Connectors - Sealed $788
600S027 Full Handrails 20.5 $853
600S028 Full Handrails 620 Fenders $853
600S029 Full Handrails 750 Fenders $853
600T010 Swing Out Reverse Fan $1,057
600T301 Smooth Ride System $4,267
600T302 Transmission Cooler Bypass 427 & 437. 4 Speed Only. $579
600T463 Auxiliary Relief Valve for 3 spool $362
600T464 Auxiliary Relief Valve for 3 & 4 spool $772
600T541 Lift ram safety strut $163
600T598 Autogreasing system. Std tires $5,166
600T599 Autogreasing system. Wide tires $5,166
600T604 Trailer Electrics - 12V $761
600W016 Wastemaster Pack $4,184
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 427 ZX USA Price Page
427 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
JCB QUICKHITCH LOADER BUCKETS - ENSURE QUICK HITCH IS ORDERED
600J360 GP Bucket - 2.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $5,468
600J361 GP Bucket - 2.7 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $5,875
600J362 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $6,814
600J366 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $7,484
JCB DIRECT MOUNTED LOADER BUCKETS (NOT FOR USE WITH QUICKHITCH)
600H368 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge $6,814
600H370 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge $7,266
600H376 GP Bucket - 2.3 cu.yd. w/ Bolt-on Cutting Edge $5,468
600H379 GP Bucket - 2.6 cu.yd. w/ Bolt-on Cutting Edge $6,050
OTHER ATTACHMENTS, QUICKHITCH TYPE
600J351 Pallet Forks and Carrier, 1500 mm tine length. 2000 mm Carriage Width $4,754
600J406 Pallet Forks and Carrier, 78" (2000 mm) wide $2,616
600J412 Fork and Frame 59" (1500 mm) Wide w/ Parallel Lift $5,053
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 427 ZX USA Price Page
2018
JCB WHEEL LOADER
437 HT
EFFECTIVE: JANUARY 01, 2018ISSUE 1.0
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
437 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic and
fuel tanks with convenient cleanout ports. Front fenders. Side panels and rear engine access electrically
assisted struts. Articulation locking strut for transporting
ENGINE
TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control switch on hydraulics
control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.
Transmission underbelly guard for added protection
TIRES Several types available, see section 2.
FRONT/REAR AXLE Open differential with outboard planetaries. Optional limited slip differentials available
for superior traction performance. Optional open differentials with automatic differential locking.
All axle types include sinter-lined pads to provide increased resistance to heat
and wear with the multi-disc brake system.
SERVICE BRAKES Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission
output shaft.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
120 amp alternator with 2 heavy duty low maintenance batteries rated at 900 CCA. Battery disconnect
switch located in battery compartment. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Audible and visual engine and powertrain warning system with front mounted instrument panel
including speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature
gauge, clock and automatic emergency engine shut-down system. Parking brake "on" warning light.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 68 dB(a) internal noise level
(SAE J2105) Dual heated exterior side view mirrors, two interior rear view mirrors, headrest,
and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.
Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes
two headlights, two front worklights, two tail lights, turn signals and cab mounted flashing beacon.
Operator's manual.
HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and responsive
distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic
circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for improved handling and
safety and an electric emergency steering pump.
LOADER Parallel lift loader end with a general purpose bucket (see Options, Section 3). Four cylinder geometry
for high torque and capacity. Two lift and two tilt cylinders. Return to dig and height kickout. Lift ram
safety strut.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and modernized
fleet control
WARRANTY 3 Year full coverage warranty (Please see the machine warranty certificate for details).
6.7 L (409 CID) 6-cylinder, 183 Gross HP Cummins QSB diesel, T4 Final, variable geometry turbocharger, diesel oxidation
catalyst, exhaust gas reciruculation, air scavenge system, low idle feature, dual element air cleaner spin-on filters, water
separator, thermostart assist and antifreeze to -33 degrees.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 437 HT USA Price Page Issue 2
437 HT WHEEL LOADER U.S. DOLLAR PRICE PAGES F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 01, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
*JCB BRANDED RADIAL FITTED TO PACKAGE BUILDS
437T(A) 437T(B)SALES STD SPEC HIGH SPEC
437T 437 HT Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) ���� ����
600A684 JCB Earthmover Radial 20.5 R25 L3 Machine Width: 97.7" ���� ����
600B015 Standard Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat ����
600B016 High Spec Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat, Reverse Cam ����
600C006 Full Cab Heater & Air Conditioning ����
600C007 Full Cab Climate Control ����
600D276 LSD Axles HD, 4 Speed 20.5 Half Rear ����
600D291 LSD Axles, Sint, HD, 4 Speed 20.5 Full Rear ����
600E052 4 Speed, Std. Height Loader Arm, 3 Spool Joystick Hydraulics Parallel Lift ���� ����
600F054 Operators Handbook and Manual Pack, English ���� ����
600J005 Industrial Quickhitch With Pin Isolator Valve. 427HT and 437HT Std Arms ���� ����
600J366 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount ���� ����
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) ����
600T049 Swing out reverse fan ����
600T301 Smooth Ride System ���� ����
SUGGESTED LIST PRICE $206,499 $211,816
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 437 HT USA Price Page Issue 2
437 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE
437T 437 HT Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) $162,046
TIRES INCLUDING RIMS
600A657 Michelin XTLA 20.5 R25 L2 Machine Width: 102.3" $9,624
600A660 Michelin XSNOPLUS 20.5R25 L2 Machine Width: 102.5" $11,746
600A679 Goodyear HRL 20.5-25 16PLY L3 Machine Width: 103.3" $8,908
600A680 Goodyear SGL 20.5-25 16 PR L2 Machine Width: 102.3" $8,401
600A682 JCB Sitemaster 20.5-25 16PLY L3 Machine Width: 102.7" $6,894
600A684 JCB Earthmover Radial 20.5 R25 L3 Machine Width: 97.7" $7,794
600A689 Michelin XHA 20.5R25 L3 Machine Width: 102.3" $11,530
600A694 Michelin XMINED 2 20.5 R25 L5 Machine Width: 102.3" $19,478
600A701 Michelin XLD 650/65R25 L3 $14,135
OPERATORS AREA
600B015 Standard Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat $3,752
600B016 High Spec Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat, Reverse Cam $6,153
CAB CONDITIONING SYSTEMS
600C006 Full Cab Heater & Air Conditioning $2,980
600C007 Full Cab Climate Control $3,829
600C009 Full Cab Climate Control - Epoxy Coated $4,219
TRANSMISSION AND AXLES
600D259 Std Axles, Sint, HD, 4 Speed 20.5 Half Rear $9,353
600D260 Std Axles, Sint, HD, 4 Speed 20.5 Full Rear $9,800
600D261 Std Axles, Sint, HD, 4 Speed 620 Full Rear $9,800
600D267 Std Axles, Sint, HD, 5 Speed Luc2-5, 20.5 Full Rear $16,247
600D268 Std Axles, Sint, HD, 5 Speed Luc2-5, 620 Full Rear $16,247
600D276 LSD Axles HD, 4 Speed 20.5 Half Rear $11,554
600D277 LSD Axles HD, 4 Speed 20.5 Full Rear $12,065
600D291 LSD Axles, Sint, HD, 4 Speed 20.5 Full Rear $12,290
600D292 LSD Axles, Sint, HD, 4 Speed 620 Full Rear $12,290
600D298 LSD Axles, Sint, HD, 5 Speed LUC 2-5, 20.5 Full Rear $18,737
600D299 LSD Axles, Sint, HD, 5 Speed LUC 2-5, 620 Full Rear $18,737
600D309 Auto Lock Front Axle, Std Rear, Sint, HD, 4 Speed 20.5 Full Rear $13,356
600D310 Auto Lock Front Axle, Std Rear, Sint, HD, 4 Speed 620 Full Rear $13,356
600D316 Auto Lock Front Axle, Std Rear, Sint, HD, 5 Speed LUC 2-5, 20.5 Full Rear $19,805
600D318 Auto Lock Front Axle, Std Rear, Sint, HD, 5 Speed LUC 2-5, 620 Full Rear $19,805
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 4 437 HT USA Price Page Issue 2
437 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
LOADER ARMS & AUXILIARY HYDRAULICS
STANDARD ARM
600E052 4 Speed, Std. Height Loader Arm, 3 Spool Joystick Hydraulics Parallel Lift $2,182
600E053 4 Speed, Std. Height Loader Arm, 3 Spool Multi Lever Hydraulics Parallel Lift $2,182
600E054 4 Speed, Std. Height Loader Arm, 4 Spool Joystick Hydraulics Parallel Lift $2,911
600E055 4 Speed, Std. Height Loader Arm, 4 Spool Multilever Hydraulics Parallel Lift $2,911
600E110 5 Speed, Std. Height Loader Arm, 3 Spoo L Joystick Hydraulics Parallel Lift $2,182
600E111 5 Speed, Std. Height Loader Arm, 3 Spoo L Multi Lever Hydraulics Parallel Lift $2,182
600E112 5 Speed, Std. Height Loader Arm, 4 Spoo L Joystick Hydraulics Parallel Lift $2,911
600E113 5 Speed, Std. Height Loader Arm, 4 Spoo L Multilever Hydraulics Parallel Lift $2,911
HIGHLIFT ARM
600E056 4 Speed, High Lift Loader Arm, 3 Spool Joystick Hydraulics Parallel Lift $9,334
600E057 4 Speed, High Lift Loader Arm, 3 Spool Multilever Hydraulics Parallel Lift $9,334
600E058 4 Speed, High Lift Loader Arm, 4 Spool Joystick Hydraulics Parallel Lift $10,062
600E059 4 Speed, High Lift Loader Arm, 4 Spool Multilever Hydraulics Parallel Lift $10,062
600E114 5 Speed, High Lift Loader Arm, 3 Spool Joystick Hydraulics Parallel Lift $9,334
600E115 5 Speed, High Lift Loader Arm, 3 Spool Multi Lever Hydraulics Parallel Lift $9,334
600E116 5 Speed, High Lift Loader Arm, 4 Spool Joystick Hydraulics Parallel Lift $10,062
600E117 5 Speed, High Lift Loader Arm, 4 Spool Multi Lever Hydraulics Parallel Lift $10,062
SUPER HIGH LIFT ARM
600E060 4 Speed, Super High Lift Loader Arm, 3 Spool Joystick Hydraulics Parallel Lift $12,965
600E061 4 Speed, Super High Lift Loader Arm, 3 Spool Multilever Hydraulics Parallel Lift $12,965
600E062 4 Speed, Super High Lift Loader Arm, 4 Spool Joystick Hydraulics Parallel Lift $13,694
600E063 4 Speed, Super High Lift Loader Arm, 4 Spool Multilever Hydraulics Parallel Lift $13,694
600E118 5 Speed, Super High Lift Loader Arm, 3 Spool Joystick Hydraulics Parallel Lift $12,965
600E119 5 Speed, Super High Lift Loader Arm, 3 Spool Multi Lever Hydraulics Parallel Lift $12,965
600E120 5 Speed, Super High Lift Loader Arm, 4 Spool Joystick Hydraulics Parallel Lift $13,694
600E121 5 Speed, Super High Lift Loader Arm, 4 Spool Multi Lever Hydraulics Parallel Lift $13,694
MANUALS
600F054 Operators Handbook and Manual Pack, English $0
600F074 Operators Handbook and Manual Pack, French $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 5 437 HT USA Price Page Issue 2
437 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATOR AND CAB OPTIONS
600R001 Carbon Filter - Cab Air Intake $177
600R005 Deluxe Fabric Seat - 3" Seatbelt $585
600R006 Super Deluxe Fabric Seat - 3" Seatbelt $1,057
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) $227
600R015 LED Worklights - cab mounted (provides a total of 4 Front, 4 Rear on Cab and 2 Rear on Hood) $1,653
600R016 Windshield Guard - Front & Side $1,849
600R026 In Cab Floor Carpet $471
600R027 In Cab Cool Box $629
600R028 360 Degree work lights (All LED) 6 front, 6 rear, 2 in grill $2,573
600R042 Hi-vis seatbelt - 2 inch only. Orange $119
MACHINE PROTECTION OPTIONS
600S018 Front Light Guards $167
600S026 Rear Grille Guard - Black 437 $1,868
600S027 Full Handrails 20.5 $853
600S028 Full Handrails 620 Fenders $853
600S029 Full Handrails 750 Fenders $853
600S439 Rear Light Guards $673
HYDRAULIC AND OTHER MACHINE OPTIONS
600J005 Industrial Quickhitch With Pin Isolator Valve. 427HT and 437HT Std Arms $4,440
600J007 Industrial Quickhitch With Pin Isolator Valve. 437 HL $4,440
600J008 Industrial Quickhitch With Pin Isolator Valve. 437 SHL $4,440
600J014 Quick Hitch Ready for standard arms $1,572
600J015 Quick Hitch Ready for highlift arms $1,572
600J016 Quick Hitch Ready for super highlift arms $1,572600M004 Hydraulic Oil (Bio-degradable ) $2,901600M007 Epoxy Coated Cooling Pack $946600N001 Reverse Smart Alarm (82-112dba, 5 dba above ambient) $211600N009 Rear radar system (Compatible with rear guard) $4,598600N010 Rear radar system (Not compatible with rear guard) $4,598600T018 Autogreasing. Std arm. Non Parallel Links. 20.5 tires $5,166600T019 Autogreasing. Std arm. Parallel Links. 20.5 tires $5,166600T020 Autogreasing. Std arm. Non Parallel Links. Wide tires $5,166600T021 Autogreasing. Std arm. Parallel Links. Wide tires $5,166600T022 Autogreasing. High lift arm. 20.5 tires $5,166600T023 Autogreasing. High lift arm. 20.5 tires $5,166600T024 Autogreasing. Super high lift arm. 20.5 tires $5,166600T025 Autogreasing. Super high lift arm. 20.5 tires $5,166600T049 Swing out reverse fan $1,105600T100 Non Parallel Linkage Kit - 427 & 437 HT $0600T104 Non Parallel Linkage Kit - 437 High Lift $0600T301 Smooth Ride System $4,267600T302 Transmission Cooler Bypass 427 & 437. 4 Speed Only. $579600T463 Auxiliary Relief Valve for 3 spool $362600T464 Auxiliary Relief Valve for 3 & 4 spool $772600T541 Lift ram safety strut $163600T604 Trailer Electrics - 12V $761600W017 Wastemaster pack $4,184
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 437 HT USA Price Page Issue 2
437 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
JCB QUICKHITCH LOADER BUCKETS - ENSURE QUICK HITCH IS ORDERED
600J362 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $6,814
600J366 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $7,484
JCB DIRECT MOUNTED LOADER BUCKETS (NOT FOR USE WITH QUICKHITCH)
600H361 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge $6,807
600H362 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge $7,266
OTHER ATTACHMENTS, QUICKHITCH TYPE
600J351 Pallet Forks and Carrier, 1500 mm tine length. 2000 mm Carriage Width $4,754
600J378 Fork Frame and Forks - ITA Class III 59" wide (48" x 4" x 2") $4,754
600J406 Pallet Forks and Carrier, 78" (2000 mm) wide $2,616
600J412 Fork and Frame 59" (1500 mm) Wide w/ Parallel Lift $5,053
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 7 437 HT USA Price Page Issue 2
2018
JCB WHEEL LOADER
437 ZX
EFFECTIVE: JANUARY 01, 2018ISSUE 1.0
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
437 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
STANDARD EQUIPMENT
GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic and
fuel tanks with convenient cleanout ports. Front fenders. Side panels and rear engine access electrically
assisted struts. Articulation locking strut for transporting.
ENGINE 6.7 L (409 CID) 6-cylinder, 183 Gross HP Cummins QSB diesel, T4 Final, variable geometry turbocharger,
diesel oxidation catalyst, exhaust gas reciruculation, air scavenge system, low idle feature, dual element air cleaner
spin-on filters, water separator, thermostart assist and antifreeze to -33 degrees.
TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears
with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear
selection with transmission kickdown button. Forward and reverse control switch on hydraulics
control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.
Transmission underbelly guard added for protection.
TIRES Several types available. See Section 2.
FRONT/REAR AXLES Open differential with outboard planetaries. Optional limited slip differentials available
for superior traction performance. Optional open differentials with automatic differential locking.
All axle types include sinter-lined pads to provide increased resistance to heat
and wear with the multi-disc brake system.
SERVICE BRAKES Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to
provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission
output shaft.
ELECTRICS 24 volt, IP 67 water and dust resistant connectors with numerical coded wiring.
120 amp alternator with 2 heavy duty low maintenance batteries rated at 900 CCA. Battery disconnect
switch located in battery compartment. Electrical circuit test button. Back-up Alarm.
INSTRUMENTS Audible and visual engine and powertrain warning system with front mounted instrument panel
including speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature
gauge, clock and automatic emergency engine shut-down system. Parking brake "on" warning light.
CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 68 dB(a) internal noise level
(SAE J2105) Dual heated exterior side view mirrors, two interior rear view mirrors, headrest
and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.
Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes
two headlights, two front worklights, two tail lights, turn signals
and cab mounted flashing beacon. Operator's manual.
HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and responsive
distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic
circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for improved handling and
safety and an electric emergency steering pump.
LOADER Z-Bar loader end with a general purpose bucket (see buckets, Section 2). Z-Bar geometry for high
breakout torque and capacity. Two lift and one tilt cylinders. Return to dig and height kickout.
Lift ram safety strut.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and modernized
fleet control.
WARRANTY 3 Year full coverage warranty (please see the machine warranty certificate for details)
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 437 ZX USA Price Page
437 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 01, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
*JCB BRANDED RADIAL FITTED TO PACKAGE BUILDS
SALESYELLOW
SERIES437Z(B)
CODE ITEM HIGH SPEC
437Z 437 ZX Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) ���� ����
600A684 JCB Earthmover Radial 20.5 R25 L3 Machine Width: 97.7" ���� ����
600B015 Standard Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat ����
600B016 High Spec Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat, Reverse Cam ����
600C006 Full Cab Heater & Air Conditioning ����
600C007 Full Cab Climate Control ����
600D276 LSD Axles HD, 4 Speed 20.5 Half Rear ����
600D277 LSD Axles HD, 4 Speed 20.5 Full Rear ����
600E042 4 Speed, Std. Height Loader Arm, 3 Spool Joystick Hydraulics ���� ����
600F054 Operators Handbook and Manual Pack, English ���� ����
600H370 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge ���� ����
600J018 Quickhitch ready ���� ����
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) ����
600T049 Swing out reverse fan ���� ����
600T301 Smooth Ride System ���� ����
SUGGESTED LIST PRICE $196,688 $200,676
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 437 ZX USA Price Page
437 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE
437Z 437 ZX Base Machine (TIER 4 FINAL EMISSIONS COMPLIANT) $153,781
TIRES INCLUDING RIMS
600A657 Michelin XTLA 20.5 R25 L2 Machine Width: 102.3" $9,624
600A660 Michelin XSNOPLUS 20.5R25 L2 Machine Width: 102.5" $11,746
600A679 Goodyear HRL 20.5-25 16PLY L3 Machine Width: 103.3" $8,908
600A680 Goodyear SGL 20.5-25 16 PR L2 Machine Width: 102.3" $8,401
600A682 JCB Sitemaster 20.5-25 16PLY L3 Machine Width: 102.7" $6,894
600A684 JCB Earthmover Radial 20.5 R25 L3 Machine Width: 97.7" $7,794
600A689 Michelin XHA 20.5R25 L3 Machine Width: 102.3" $11,530
600A694 Michelin XMINED 2 20.5 R25 L5 Machine Width: 102.3" $19,478
600A701 Michelin XLD 650/65R25 L3 $14,135
OPERATORS AREA
600B015 Standard Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat $3,752
600B016 High Spec Cab, ROPS/FOPS - Sliding/Tinted Glass, Fabric Suspension Seat, Reverse Cam $6,153
CAB CONDITIONING SYSTEMS
600C006 Full Cab Heater & Air Conditioning $2,980
600C007 Full Cab Climate Control $3,829
600C009 Full Cab Climate Control - Epoxy Coated $4,219
TRANSMISSION AND AXLES
600D259 Std Axles, Sint, HD, 4 Speed 20.5 Half Rear $9,353
600D260 Std Axles, Sint, HD, 4 Speed 20.5 Full Rear $9,800
600D261 Std Axles, Sint, HD, 4 Speed 620 Full Rear $9,800
600D267 Std Axles, Sint, HD, 5 Speed Luc2-5, 20.5 Full Rear $16,247
600D268 Std Axles, Sint, HD, 5 Speed Luc2-5, 620 Full Rear $16,247
600D276 LSD Axles HD, 4 Speed 20.5 Half Rear $11,554
600D277 LSD Axles HD, 4 Speed 20.5 Full Rear $12,065
600D291 LSD Axles, Sint, HD, 4 Speed 20.5 Full Rear $12,290
600D292 LSD Axles, Sint, HD, 4 Speed 620 Full Rear $12,290
600D298 LSD Axles, Sint, HD, 5 Speed LUC 2-5, 20.5 Full Rear $18,737
600D299 LSD Axles, Sint, HD, 5 Speed LUC 2-5, 620 Full Rear $18,737
600D309 Auto Lock Front Axle, Std Rear, Sint, HD, 4 Speed 20.5 Full Rear $13,356
600D310 Auto Lock Front Axle, Std Rear, Sint, HD, 4 Speed 620 Full Rear $13,356
600D316 Auto Lock Front Axle, Std Rear, Sint, HD, 5 Speed LUC 2-5, 20.5 Full Rear $19,805
600D318 Auto Lock Front Axle, Std Rear, Sint, HD, 5 Speed LUC 2-5, 620 Full Rear $19,805
LOADER ARMS & AUXILIARY HYDRAULICS
600E042 4 Speed, Std. Height Loader Arm, 3 Spool Joystick Hydraulics $2,616
600E043 4 Speed, Std. Height Loader Arm, 3 Spool Multi Lever Hydraulics $2,616
600E044 4 Speed, Std. Height Loader Arm, 4 Spool Joystick Hydraulics $3,480
600E045 4 Speed, Std. Height Loader Arm, 4 Spool Multi Lever Hydraulics $3,480
600E131 5 Speed, Std. Height Loader Arm, 3 Spool Joystick Hydraulics $2,616
600E132 5 Speed, Std. Height Loader Arm, 3 Spool Multi Lever Hydraulics $2,616600E133 5 Speed, Std. Height Loader Arm, 4 Spool Joystick Hydraulics $3,480
600E134 5 Speed, Std. Height Loader Arm, 4 Spool Multi Lever Hydraulics $3,480
MANUALS
600F054 Operators Handbook and Manual Pack, English $0600F074 Operators Handbook and Manual Pack, French $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer
All prices and specifications subject to change without notice page 4 437 ZX USA Price Page
437 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SALES U.S.
CODE ITEM LIST
OPERATOR AND CAB OPTIONS
600R001 Carbon Filter - Cab Air Intake $177
600R005 Deluxe Fabric Seat - 3" Seatbelt $585
600R006 Super Deluxe Fabric Seat - 3" Seatbelt $1,057
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) $227
600R015 LED Worklights - cab mounted (provides a total of 4 Front, 4 Rear on Cab and 2 Rear on Hood)$1,653
600R016 Windshield Guard - Front & Side $1,849
600R026 In Cab Floor Carpet $471
600R027 In Cab Cool Box $629
600R028 360 Degree work lights (All LED) 6 front, 6 rear, 2 in grill $2,573
600R042 Hi-vis seatbelt - 2 inch only. Orange $119
MACHINE PROTECTION OPTIONS
600S018 Front Light Guards $167
600S026 Rear Grille Guard - Black 437 $1,868
600S027 Full Handrails 20.5 $853
600S028 Full Handrails 620 Fenders $853
600S029 Full Handrails 750 Fenders $853
600S439 Rear Light Guards $673
HYDRAULIC AND OTHER MACHINE OPTIONS
600J009 Industrial Quickhitch With Pin Isolator Valve. 427 ZX and 437 ZX $4,440
600J018 Quickhitch ready $1,572
600M004 Hydraulic Oil (Bio-degradable ) $2,901
600M007 Epoxy Coated Cooling Pack $946
600N001 Reverse Smart Alarm (82-112dba, 5 dba above ambient) $211
600N009 Rear radar system (Compatible with rear guard) $4,598
600N010 Rear radar system (Not compatible with rear guard) $4,598
600T026 Autogreasing system. 20.5 Tires $5,166
600T027 Autogreasing system. Wide tires $4,926
600T049 Swing out reverse fan $1,105
600T301 Smooth Ride System $4,267
600T302 Transmission Cooler Bypass 427 & 437. 4 Speed Only. $579
600T463 Auxiliary Relief Valve for 3 spool $362
600T464 Auxiliary Relief Valve for 3 & 4 spool $772
600T541 Lift ram safety strut $163
600T604 Trailer Electrics - 12V $761
600W017 Wastemaster pack $4,184
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 437 ZX USA Price Page
437 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
JCB QUICKHITCH LOADER BUCKETS - ENSURE QUICK HITCH IS ORDERED
600J362 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $6,814
600J366 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount $7,484
JCB DIRECT MOUNTED LOADER BUCKETS (NOT FOR USE WITH QUICKHITCH)
600H368 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge $6,814
600H370 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge $7,266
OTHER ATTACHMENTS, QUICKHITCH TYPE
600J351 Pallet Forks and Carrier, 1500 mm tine length. 2000 mm Carriage Width $4,754
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 437 ZX USA Price Page
2018
JCB WHEEL LOADER
457 HT
EFFECTIVE: JANUARY 01, 2018ISSUE 1.0
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
457 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
EFFECTIVE: JANUARY 01,
2018
STANDARD EQUIPMENT
GENERAL
ENGINE
TRANSMISSION
TIRES See Section 2.
FRONT/REAR AXLES
SERVICE BRAKES
ELECTRICS
INSTRUMENTS
CAB UNIT
HYDRAULICS
LOADER
LIVELINK
WARRANTY 3 Year full coverage warranty (please see the machine warranty certificate for details)
Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic
and fuel tanks with convenient cleanout ports. Steel front and rear fenders, side panels and rear engine
access electrically assisted struts. Articulation locking strut for transporting.
7.7 L (470 CID) 6-cylinder turbo-charged, water-cooled direct injection with 258 gross HP Tier 4 Final,
dual element air cleaner, spin-on filters, water separator thermostart assist and antifreeze to -33
degrees. Integral oil cooler and water pump and self tensioning fan belt. Mesh air intake screens
Full powershift automatic transmission with torque converter. Four forward and three reverse gears with
a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear selection
with transmission kickdown button. Forward and reverse control lever on steering column and an FNR
switch on hydraulic control lever. Automatic transmission disconnect activated by braking.
Transmission underbelly guard for added protection.
Standard differentials with outboard planetaries. Optional limited slip differentials available for superior
traction performance. Optional automatic locking differential on front axle also available.
Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to provide
stopping ability in all conditions and emergency. Parking brake, electro-hydraulic disc type operating on
transmission output shaft. Applies when engine is shutdown.
24 volt, IP 67 water and dust resistant connectors with numerical coded wiring. 100 amp alternator with
2 heavy duty low maintenance batteries rated at 900 CCA. Battery disconnect switch located in battery
compartment. Electrical circuit test button. Back-up Alarm.
Audible and visual engine and powertrain warning system with front mounted instrument panel including
speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature gauge,
clock and auto emergency engine shut-down system. Parking brake "on" warning light & audible alarm.
SAE certified ROPS/FOPS fully enclosed pressurized cab with 68 dB(a) internal noise level (SAE J2105)
Dual heated exterior side view mirrors, two interior rear view mirrors, headrest and sun visor. Fully
adjustable cloth suspension seat with 3 inch seat belt and left hand armrest. Heater/defroster,
windshield wiper/washer, radio provision with speakers. Lighting package includes two headlights, two
front worklights, two tail lights, turn signals and cab mounted flashing beacon. Ceiling mounted switch
bank for accessory controls. Operator's and service manuals
Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and
responsive distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary
hydraulic circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for
improved handling and safety. Electric emergency steering pump.
Parallel lift loader end with a general purpose bucket (see buckets, Section 2). Four cylinder geometry
for high attachment torque and capacity. Two lift and two tilt cylinders. Return to dig and height kickout.
Lift cylinder safety strut.
3 year subscription allows for enhanced machine security, improved service monitoring, and modernized
fleet control
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 457 HT USA Price Page
457 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 01, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES 457T(A) 457T(B)CODE ITEM STD SPEC HIGH SPEC
457T 457 HT Base Machine (258 Gross HP, TIER 4 FINAL EMISSION COMPLIANT) ���� ����
600A491 JCB Radial GPR 23.5 R25 L3 ���� ����
600B007 Standard Cab, ROPS/FOPS - includes 3 inch seatbelt ����
600B008 High Spec Cab, ROPS/FOPS - includes 3 inch seatbelt, Secondary Screen and Deluxe Seat ����
600C001 A/C and Heater System w/ Radiator Debris Guard ���� ����
600D003 Limited Slip Axles with Automatic 4 Speed Powershift Transmission ���� ����
600E013 Std. Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick - Mounted Proportional Buttons ���� ����
600F017 Operators Handbook and Manual Pack, English ���� ����
600J003 Quickhitch - JCB Hydraulic includes Couplings and Electric Pin Isolator ���� ����
600J425 GP Bucket - 4.6 cu.yd. w/ Bolt-on Cutting Edge ���� ����
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) ����
600S012 Full Rear Fenders ����
600T011 Smooth Ride System (457) ����
600T411 JCB Smooth Ride System (Load Suspension) ���� ����
SUGGESTED LIST PRICE $282,255 $285,497
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may befitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 457 HT USA Price Page
457 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: JANUARY 01, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE
457T 457 HT Base Machine (258 Gross HP, TIER 4 FINAL EMISSION COMPLIANT) $220,563
TIRES INCLUDING RIMS
600A373 Michelin XTLA 23.5 R 25 $5,745
600A374 Michelin XHA 23.5 - R25 L3 $8,805
600A377 Michelin XMine D2 23.5 - R25, L5 $19,890
600A382 Michelin XLD L3T 650/65 R25 L3 $9,574
600A475 Goodyear HRL 23.5-25: L3 Cross Ply, 20 PLY $7,021
600A491 JCB Radial GPR 23.5 R25 L3 $7,416
600A514 SG Revolution S2C2 DWL 23.5 R25 Solid Cushion $31,035
OPERATORS AREA
600B007 Standard Cab, ROPS/FOPS - includes 3 inch seatbelt $3,861
600B008 High Spec Cab, ROPS/FOPS - includes 3 inch seatbelt, Secondary Screen and Deluxe Seat $5,070
CAB CONDITIONING SYSTEMS
600C001 A/C and Heater System w/ Radiator Debris Guard $3,941
600C002 Automatic Climate Control - A/C and Heater System $4,807
600C004 Full Cab Heater & Air Conditioning - Epoxy Coated $4,733
600C005 Full Cab Climate Control, Atc- Epoxy Coated. $5,186
TRANSMISSION AND AXLES
600D001 $9,429
600D002 $16,291
600D003 $11,498
600D004 $18,359
600D005 $14,116
600D006 Standard Axles with Automatic Differential Lock on Front Axle 5 Speed Transmission with Lock up $21,007
600D010 Standard Axles with Automatic 5 Speed Powershift Transmission with Lock up - Super High Lift Arms $16,291
600D011 Limited Slip Axles with Automatic 5 Speed Powershift Transmission with Lock up - Super High Lift Arms $18,359
600D012 Standard Axles with Automatic Differential Lock on Front Axle 5 Speed Transmission with Lock up - Super High Lift Arms $21,007
LOADER ARMS & AUXILIARY HYDRAULICS
Standard
600E013 Std. Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick - Mounted Proportional Buttons $10,962
600E014 Std. Height Loader Arm, 3 Spool Multi Lever Hydraulics. $8,420
600E015 Std. Arms, Two Aux. Hyd. Service, 3 & 4 spool with Joystick Mounted Proportional buttons; changeover switch. $11,420
600E016 Std. Height Loader Arm, 4 Spool Multi Lever Hydraulics. $9,787
Super High-Lift
600E017 Super High Lift Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick - Mounted Proportional Buttons $17,276
600E018 Super High Lift Loader Arm, 3 Spool Multi Lever Hydraulics. $16,087
600E019 Super High Lift Arms, Two Aux. Hyd. Services 3 & 4 spool joystick mounted proportional buttons; changeover switch. $17,480
600E020 Super High Lift Loader Arm, 4 Spool Multi Lever Hydraulics. $16,472
MANUALS
600F017 Operators Handbook and Manual Pack, English $0
600F018 Operators Handbook and Manual Pack, French $0
Standard Axles with Automatic 4 Speed Powershift Transmission
Standard Axles with Automatic 5 Speed Powershift Transmission with Lock up
Limited Slip Axles with Automatic 4 Speed Powershift Transmission
Limited Slip Axles with Automatic 5 Speed Powershift Transmission with Lock up
Standard Axles with Automatic Differential Lock on Front Axle 4 Speed Transmission
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
All prices and specifications subject to change without notice page 4 457 HT USA Price Page
457 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATOR AND CAB OPTIONS
600R001 Carbon Filter - Cab Air Intake $177
600R005 Deluxe Fabric Seat - 3" Seatbelt $585
600R006 Super Deluxe Fabric Seat - 3" Seatbelt $1,057
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) $227
600R015 LED Worklights - cab mounted (provides a total of 4 Front, 4 Rear on Cab and 2 Rear on Hood) $1,653
600R026 In Cab Floor Carpet $471
600R027 In Cab Cool Box $629
600R028 360 Degree work lights (All LED) 6 front, 6 rear, 2 in grill $2,573
600R042 Hi-vis seatbelt - 2 inch only. Orange $119
MACHINE PROTECTION OPTIONS
600R029 Front screen guard $1,323
600S001 Front Chassis Protection Mat $923
600S006 Rear Grille Guard - White To Match Red & White Chevron Counterweight $1,897
600S007 Rear Grille Guards $1,650
600S008 Full Handrails $2,799
600S009 Rear Belly Guard Kit $636
600S010 Front Belly Guard Kit $1,017
600S011 Rear Light Guards $869
600S018 Front Light Guards $167
HYDRAULIC AND OTHER MACHINE OPTIONS
600J003 Quickhitch - JCB Hydraulic includes Couplings and Electric Pin Isolator $6,459
600J010 Quickhitch - JCB Hydraulic includes Couplings and Electric Pin Isolator. SHL Arms $6,459
600J011 Quickhitch ready $1,611
600M001 Radiator - Wide Core (For use in ambient temperatures below 104°F) $1,481
600M002 Std Cooling Pack - Epoxy Coated $1,462
600M003 Wide Core Cooling - Epoxy Coated $2,937
600M004 Hydraulic Oil (Bio-degradable ) $2,901
600N001 Reverse Smart Alarm (82-112dba, 5 dba above ambient) $211
600N007 Rear radar system (Compatible with rear guard) $4,598
600N008 Rear radar system (Not compatible with rear guard) $4,598
600P002 Transmission Cooler Bypass System (Quick heat of Transmission oil) $733
600S012 Full Rear Fenders $637
600T002 Auto Lube (Installed) $6,226
600T003 Auto Lube (Installed) - Super High Lift Arm only $6,226
600T011 Smooth Ride System (457) $1,168
600T411 JCB Smooth Ride System (Load Suspension) $5,545
600T428 Wheels and Tyres Assembly Spare: Michelin XMINED 2-23.5 R25 $6,696
600T463 Auxiliary Relief Valve for 3 spool $362
600T464 Auxiliary Relief Valve for 3 & 4 spool $772
600W013 Wastemaster Package $7,809
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 457 HT USA Price Page
457 HT WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
JCB QUICKHITCH LOADER BUCKETS - ENSURE QUICK HITCH IS ORDERED
600J418 GP Bucket - 3.9 cu.yd. Shovel, with Teeth And Toeplate $13,776
600J421 GP Bucket - 4.3 cu.yd. w/ Bolt-on Cutting Edge $11,228
600J425 GP Bucket - 4.6 cu.yd. w/ Bolt-on Cutting Edge $11,833
JCB DIRECT MOUNTED LOADER BUCKETS (NOT FOR USE WITH QUICKHITCH)
600H419 GP Bucket - 3.9 cu.yd. w/ Bolt-on Cutting Edge $10,929
600H420 GP Bucket - 3.9 cu.yd. w/ Teeth & Segmented Cutting Edge $13,776
600H424 GP Bucket - 4.3 cu.yd. w/ Bolt-on Cutting Edge $11,228
600H425 GP Bucket - 4.6 cu.yd. w/ Teeth & Segmented Cutting Edge $14,295
600H429 GP Bucket - 4.6 cu. yd. w/ Bolt-on Cutting Edge $11,833
600H430 GP Bucket - 4.6 cu. yd. w/ Teeth & Segmented Cutting Edge $14,817
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 457 HT USA Price Page
2018
#N/A
JCB WHEEL LOADER
457 ZX
EFFECTIVE: JANUARY 01, 2018ISSUE 1.0
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
457 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
GA
EFFECTIVE: JANUARY 01,
2018
STANDARD EQUIPMENT
GENERAL
ENGINE
TRANSMISSION
TIRES See Section 2.
#N/A
SERVICE BRAKES
ELECTRICS
INSTRUMENTS
CAB UNIT
HYDRAULICS
LOADER
LIVELINK
WARRANTY 3 Year full coverage warranty (please see the machine warranty certificate for details)
Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic
and fuel tanks with convenient cleanout ports. Steel front and rear fenders, side panels and rear engine
access electrically assisted struts. Articulation locking strut for transporting.
7.7 L (470 CID) 6-cylinder turbo-charged, water-cooled direct injection with 258 gross HP Tier 4 Final,
dual element air cleaner, spin-on filters, water separator thermostart assist and antifreeze to -33
degrees. Integral oil cooler and water pump and self tensioning fan belt. Mesh air intake screens
Full powershift automatic transmission with torque converter. Four forward and three reverse gears with
a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear selection
with transmission kickdown button. Forward and reverse control lever on steering column and an FNR
switch on hydraulic control lever. Automatic transmission disconnect activated by braking.
Transmission underbelly guard for added protection.
Standard differentials with outboard planetaries. Optional limited slip differentials available for superior
traction performance. Optional automatic locking differential on front axle also available.
Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to provide
stopping ability in all conditions and emergency. Parking brake, electro-hydraulic disc type operating on
transmission output shaft. Applies when engine is shutdown.
24 volt, IP 67 water and dust resistant connectors with numerical coded wiring. 100 amp alternator with
2 heavy duty low maintenance batteries rated at 900 CCA. Battery disconnect switch located in battery
compartment. Electrical circuit test button. Back-up Alarm.
Audible and visual engine and powertrain warning system with front mounted instrument panel including
speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature gauge,
clock and auto emergency engine shut-down system. Parking brake "on" warning light & audible alarm.
SAE certified ROPS/FOPS fully enclosed pressurized cab with 68 dB(a) internal noise level (SAE J2105)
Dual heated exterior side view mirrors, two interior rear view mirrors, headrest and sun visor. Fully
adjustable cloth suspension seat with 3 inch seat belt and left hand armrest. Heater/defroster,
windshield wiper/washer, radio provision with speakers. Lighting package includes two headlights, two
front worklights, two tail lights, turn signals and cab mounted flashing beacon. Ceiling mounted switch
bank for accessory controls. Operator's and service manuals
Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and
responsive distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary
hydraulic circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for
improved handling and safety. Electric emergency steering pump.
Z-bar loader end with a general purpose bucket (see buckets, Section 2). Z-bar geometry for high
breakout torque and capacity. Two lift and one tilt cylinders. Return to dig and height kickout. Lift
cylinder safety strut.
3 year subscription allows for enhanced machine security, improved service monitoring, and modernized
fleet control
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)
All prices and specifications subject to change without notice page 2 457 ZX USA Price Page
457 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 01, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
SALES
YELLOW
SERIES 457Z(B)
CODE ITEM HIGH SPEC
457Z 457 ZX Base Machine (258 Gross HP, TIER 4 FINAL EMISSION COMPLIANT) ���� ����
600A491 JCB Radial GPR 23.5 R25 L3 ���� ����
600B007 Standard Cab, ROPS/FOPS - includes 3 inch seatbelt ����
600B008 High Spec Cab, ROPS/FOPS - includes 3 inch seatbelt, Secondary Screen and Deluxe Seat ����
600C001 A/C and Heater System w/ Radiator Debris Guard ���� ����
600D003 Limited Slip Axles with Automatic 4 Speed Powershift Transmission ���� ����
600E023 Std. Height Loader Arm, 3 Spool Joystick Hydraulics ���� ����
600F017 Operators Handbook and Manual Pack, English ���� ����
600H414 GP Bucket - 4.6 cu. yd. w/ Bolt-on Cutting Edge ���� ����
600J012 Quick Hitch Ready ���� ����
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) ����
600S005 Heavy Duty Counterweight ���� ����
600S012 Full Rear Fenders ����
600T011 Smooth Ride System (457) ����
600T411 JCB Smooth Ride System (Load Suspension) ���� ����
SUGGESTED LIST PRICE $267,938 $271,180
Select one of the following machine PACKAGE BUILD codes, which include an Attachment.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may befitted to Package Builds. Notification will be given if an alternate tire is fitted.
All prices and specifications subject to change without notice page 3 457 ZX USA Price Page
457 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
EFFECTIVE:
JANUARY 01,
2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE
457Z 457 ZX Base Machine (258 Gross HP, TIER 4 FINAL EMISSION COMPLIANT) $215,851
TIRES INCLUDING RIMS
600A373 Michelin XTLA 23.5 R 25 $5,745
600A374 Michelin XHA 23.5 - R25 L3 $8,805
600A376 Michelin XLD L3T 650/65R25 L3 $20,796
600A377 Michelin XMine D2 23.5 - R25, L5 $19,890
600A382 Michelin XLD L3T 650/65 R25 L3 $9,574
600A475 Goodyear HRL 23.5-25: L3 Cross Ply, 20 PLY $7,021
600A491 JCB Radial GPR 23.5 R25 L3 $7,416
600A514 SG Revolution S2C2 DWL 23.5 R25 Solid Cushion $31,035
OPERATORS AREA
600B007 Standard Cab, ROPS/FOPS - includes 3 inch seatbelt $3,861
600B008 High Spec Cab, ROPS/FOPS - includes 3 inch seatbelt, Secondary Screen and Deluxe Seat $5,070
CAB CONDITIONING SYSTEMS
600C001 A/C and Heater System w/ Radiator Debris Guard $3,941
600C002 Automatic Climate Control - A/C and Heater System $4,807
600C004 Full Cab Heater & Air Conditioning - Epoxy Coated $4,733
600C005 Full Cab Climate Control, Atc- Epoxy Coated. $5,186
TRANSMISSION AND AXLES
600D001 Standard Axles with Automatic 4 Speed Powershift Transmission $9,429
600D003 Limited Slip Axles with Automatic 4 Speed Powershift Transmission $11,498
600D005 Standard Axles with Automatic Differential Lock on Front Axle 4 Speed Transmission $14,116
600D007 Limited Slip Axles with Automatic 5 Speed Powershift Transmission with Lock up $16,291
600D008 Standard Axles with Automatic Differential Lock on Front Axle 4 Speed Transmission $18,359
600D009 Standard Axles with Automatic Differential Lock on Front Axle 5 Speed Transmission with Lock up $21,007
LOADER ARMS & AUXILIARY HYDRAULICS
600E021 Std. Height Loader Arm, 2 Spool Joystick Hydraulics $3,797
600E022 Std. Height Loader Arm, 2 Spool Multi Lever Hydraulics $3,797
600E023 Std. Height Loader Arm, 3 Spool Joystick Hydraulics $4,219
600E024 Std. Height Loader Arm, 3 Spool Multi Lever Hydraulics $3,333
600E025 Std. Height Loader Arm, 4 Spool Joystick Hydraulics $4,800
600E026 Std. Height Loader Arm, 4 Spool Multi Lever Hydraulics $3,754
MANUALS
600F017 Operators Handbook and Manual Pack, English $0
600F018 Operators Handbook and Manual Pack, French $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section
All prices and specifications subject to change without notice page 4 457 ZX USA Price Page
457 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SALES U.S.
CODE ITEM LIST
OPERATOR AND CAB OPTIONS
600R001 Carbon Filter - Cab Air Intake $177
600R005 Deluxe Fabric Seat - 3" Seatbelt $585
600R006 Super Deluxe Fabric Seat - 3" Seatbelt $1,057
600R014 Additional Worklights - cab mounted (6 Front, 2 Rear on Cab and 2 Rear on Hood) $227
600R015 LED Worklights - cab mounted (provides a total of 4 Front, 4 Rear on Cab and 2 Rear on Hood) $1,653
600R026 In Cab Floor Carpet $471
600R027 In Cab Cool Box $629
600R028 360 Degree work lights (All LED) 6 front, 6 rear, 2 in grill $2,573
600R042 Hi-vis seatbelt - 2 inch only. Orange $119
MACHINE PROTECTION OPTIONS
600R029 Front screen guard $1,323
600S001 Front Chassis Protection Mat $923
600S006 Rear Grille Guard - White To Match Red & White Chevron Counterweight $1,897
600S007 Rear Grille Guards $1,650
600S008 Full Handrails $2,799
600S009 Rear Belly Guard Kit $636
600S010 Front Belly Guard Kit $1,017
600S011 Rear Light Guards $869
600S018 Front Light Guards $167
HYDRAULIC AND OTHER MACHINE OPTIONS
600J001 Quickhitch - JCB Hydraulic includes Couplings and Electric Pin Isolator $6,459
600J012 Quick Hitch Ready $1,611
600M001 Radiator - Wide Core (For use in ambient temperatures below 104°F) $1,481
600M002 Std Cooling Pack - Epoxy Coated $1,462
600M003 Wide Core Cooling - Epoxy Coated $2,937
600M004 Hydraulic Oil (Bio-degradable ) $2,901
600N001 Reverse Smart Alarm (82-112dba, 5 dba above ambient) $211
600N007 Rear radar system (Compatible with rear guard) $4,598
600N008 Rear radar system (Not compatible with rear guard) $4,598
600P002 Transmission Cooler Bypass System (Quick heat of Transmission oil) $733
600S012 Full Rear Fenders $637
600T004 Auto Lube (Installed) $6,226
600T011 Smooth Ride System (457) $1,168
600T411 JCB Smooth Ride System (Load Suspension) $5,545
600T463 Auxiliary Relief Valve for 3 spool $362
600T464 Auxiliary Relief Valve for 3 & 4 spool $772
600W013 Wastemaster Package $7,809
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 457 ZX USA Price Page
457 ZX WHEEL LOADER U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 01,
2018
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
JCB QUICKHITCH LOADER BUCKETS - ENSURE QUICK HITCH IS ORDERED
600J012 Quick Hitch Ready $1,611
600J418 GP Bucket - 3.9 cu.yd. Shovel, with Teeth And Toeplate $13,983
600J421 GP Bucket - 4.3 cu.yd. w/ Bolt-on Cutting Edge $11,396
600J425 GP Bucket - 4.6 cu.yd. w/ Bolt-on Cutting Edge $12,010
JCB DIRECT MOUNTED LOADER BUCKETS (NOT FOR USE WITH QUICKHITCH)
600H398 GP Bucket - 3.9 cu.yd. w/ Bolt-on Cutting Edge $11,098
600H401 GP Bucket - 4.3 cu.yd. w/ Bolt-on Cutting Edge $11,396
600H403 GP Bucket - 3.9 cu.yd. w/ Teeth & Segmented Cutting Edge $13,989
600H404 GP Bucket - 4.3 cu.yd. w/ Teeth & Segmented Cutting Edge $14,509
600H414 GP Bucket - 4.6 cu. yd. w/ Bolt-on Cutting Edge $12,010
600H415 GP Bucket - 4.6 cu. yd. w/ Teeth & Segmented Cutting Edge $15,039
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 457 ZX USA Price Page
2018
JCB BACKHOE LOADERS
3CX COMPACTSIDE-SHIFT
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
U.S. DOLLAR PRICE
PAGES
EFFECTIVE:
JANUARY 1, 2018
STANDARD EQUIPMENT Back to Index
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able hydraulic fill and fuel cap. All locks operate with ignition key. Front and rear horn buttons.
ENGINE 74 HP Turbocharged JCB Diesel by Kohler. Water-cooled, 4 cyl, 2.5 liter T4F engine.
Electronic hand and foot throttle. Full flow pressure engine oil lubricant with spin-on filter cartridge.
Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil coolers.
Two stage fuel filtering system utilizing a water/sediment separator and spin-on type filter element.
Dual element air filter, dry type with cleanable outer element, replaceable inner element and under
hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine Bosch Rexroth hydrostatic 3-speed transmission with anti-stall.
High speed roading mode capable of 25 mph. Electrically operated Fwd / Rev lever on steering column.
Transmission neutral interlock ensures machines cannot be started in gear. Brake pedals actuation variably
reduces transmission pump engagement reducing brake wear and improving loading cycle times.
FRONT AXLE Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle. Permanent 4WD.
REAR AXLE Industrial duty JCB Max-Trac torque proportioning. Separate, rigidly mounted to mainframe & connected
to transmission via drive shaft. Heavy duty double reduction, outboard planetary gear final reduction.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Servo-assisted quick fill brakes. Independent hydraulically activated parking brake.
Transmission shifts to neutral when park brake is activated.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle 21ft 11". Braked turning circle 19ft.
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sideshift frame with 3ft 3" kingpost
MAINFRAME offset capacity and vertical stabilizers. Mainframe and stabilizers within loader bucket width.
Fabricated equal length boom and dipper. SAE minimum dig depth 10ft; Rear Auxiliary hydraulics
(1-way flow); All backhoe hoses routed through king post with junction plate. Rubber street pads (STD)
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard using mechanical self leveling during loader raise and lower functions.
Dump height 7ft 11". Load over height 9ft 7". Auxiliary loader hydraulics, Smooth Ride system (SRS) and
hydraulic quickhitch standard. Rated operating capacity of 3,364 lbs with GP shovel.
3CX COMPACT BACKHOE LOADER F.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice 2 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA EFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT (CONT.) Back to Index
ELECTRICAL SYSTEM
OPERATORS Air suspension seat and retractable seat belt. Left side entry with deluxe trim, full floor mat, fixed steering
ENVIRONMENT column, exterior mirrors, pre-wired for beacon, cup holders, storage compartment. Cab also includes
operable right side window, one piecer rear window to open over head. In-cab noise levels 71 dB(A).
HYDRAULIC SYSTEM Closed center vari-flow system with axial piston pump, engine driven behind transmission, 26.4 gpm flow
@ 2350 rpm. 100% efficiency with flow on demand. Advanced Easy Controls standard.
Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts.
TELEMATICS JCB Livelink telematics. Monitored and managed remotely via a PC or Smartphone. Two year
subscription. Real time reporting of machine hours, routine maintenance alerts, location,
critical health alerts, fuel level/consumption and work cycle information. Ability to set
machine geo-fences and curfews for improved security.
Tilt engine hood and lockable front grill. 21.1 gallon fuel tank. 27.47 gallon hydraulic system incl. transmission.
powered accessories. Common fuses and relays located in an easy access panel. Main circuit
breakers at battery positive terminal for added circuit protection. Battery Isolator as standard.
3CX COMPACT BACKHOE LOADER
for hazard flashers on, turn signals, steering mode, and lights on. 12 volt outlet for
12 volt system with 100 amp alternator. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Tow
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., coolant level, engine oil pressure,
engine oil level, transmission oil pressure, transmission oil temp, air cleaner restriction,
water in fuel indicator, windshield washer fluid level and park brake engaged. Light indicators
All prices and specifications subject to change without notice 3 Backhoe Loader USD Price Pages
F.O.B.
SAVANNAH,
EFFECTIVE:
JANUARY 1, 2018
YELLOW SERIES: Back to Index
3CX COMPACT
125 $89,438
100AA09 $0
100BA03 $508
100CA16 $3,172
100DA04 $0
100EA22 $778
100FA13 $2,790
100GA03 $0
100JA30 $580
100MA05 $654
TOTAL $97,920
GP Shovel - 78 in (2000mm) Width + Skid-Steer Hydraulic QH + Toeplate
18in (450mm) Excavator Bucket
3CX-COMPACT BACKHOE LOADER
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater. For skid-steer QH.
3CX COMPACT, 4WD, 4WS, 74hp T4 Final, 12ft Side-shift Backhoe with Fixed Dipper. Battery Isolator, Livelink.
Includes Street Pads.
3CX Compact, Model Pack
Michelin Power CL 340/80-18
Cab Electrics, Livelink. For skid-steer QH.
Hammer Pipework for 12 ft Fixed Dipper
5/8 Loader Pipework with Smooth Ride System (SRS), Return to Dig (RTD), Constant Flow and Vari-Speed for Skid-
English Territory Pack
All prices and specifications subject to change without notice 4 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
2 - NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
U.S. LIST
121 $86,863
100AA09 $0
100AA22 $20,030
100BA01 $0
100BA03 $508
100BA04 $1,569
100BA09 $1,717
100BA11 $2,136
100CA06 $3,172
100CA16 $3,172
100CA17 -$1,866
100DA01 $0
100DA04 $0
100DA08 $0
100EA02 $778
100FA02 $660
100FA13 $2,790
100GA03 $0
100GA04 $0
100GA05 $0
English Territory Pack
Spanish Territory Pack
Michelin BIBLOAD Tire Set 340/80 R18
Canopy Electrics, Livelink. For Mk2 QH.
BACKHOE PIPEWORK: (E)
Hammer Pipeworkfor For 10 ft Fixed Dipper
LOADER PIPEWORK: (E)
CAB/CANOPY: (E)
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater. For Mk2 QH.
Canopy, Vinyl Suspension Seat. For Mk2 QH.
ENCLOSURE CONTROLS: (E)
Cab Electrics, Livelink. For Mk2 QH.
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater. For skid-steer QH.
Cab Electrics, Livelink. For skid-steer QH.
5/8 Loader Pipework with Smooth Ride System (SRS), Return to Dig (RTD), Constant Flow and Vari-Speed for Skid-
Steer Hydraulic Quick-Hitch
French Territory Pack
3/8 Loader Pipework with Smooth Ride System (SRS) for Mk2 Hydraulic Quick-Hitch
TERRITORY PACKS (E)
EFFECTIVE:
JANUARY 1,
2018
3CX-COMPACT BACKHOE LOADER 0121
Michelin Power CL 340/80-18 LSD Front and Rear Axle
Michelin Power XP 27 Turf Tire Set 340/65-18
Michelin Power CL 340/80-18
BASE MACHINE (E)
JCB Sitemaster Tire set 12.5-18-10
3CX Compact, Model Pack
3CX COMPACT, 4WD, 4WS, 74hp T4 Final, 10ft Side-shift Backhoe with Fixed Dipper. Battery Isolator, Livelink.
TIRES and TRANSMISSIONS: (E)
MODEL PACK: (E)
3CX Compact Potholemaster, Model Pack. Includes: HD Potholemaster Sweeper, 12" Excavator Patch Planer and
HM25 Hand-Held Hammer
All prices and specifications subject to change without notice 5 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
3 - OPTIONS: Back to Index
U.S. LIST
100HA23 $132
100HA24 $1,474
100JA17 $580
100JA18 $2,229
100JA30 $580
100JA31 $2,229
100KA03 $202
100MA02 $582
100MA05 $654
100MA06 $741
100MA14 $95
100MA40 $626
100NA02 $3,309
100NA04 $1,303
100PA02 $1,577
100PA05 $44
100PA07 $122
24in (600mm) Excavator Bucket
Excavator Bucket Pivot Pin Set
Rotating Amber Beacon
LED Dipper Mounted Worklight
47in (1200mm) Grading Bucket
HAND HELD TOOL CIRCUITS
9M Hose Reel With Handheld Tool Circuit Pipework & Breaker Mount
Boom & Dipper HBCVs For Use with Hammer Pipework
VEHICLE ELECTRICAL OPTIONS
LED Work Light Pack of 10 (4 front, 4 rear, 2 side)
LOADER BUCKET OPTIONS
6 In 1 Clam Ram Guards
BACKHOE BUCKET OPTIONS
12in (300mm) Excavator Bucket
18in (450mm) Excavator Bucket
GP Shovel - 78 in (2000mm) Width + Skid-Steer Hydraulic QH + Toeplate
6 In 1 Shovel - 78 in (2000mm) Width + Skid-Steer Hydraulic QH + Toeplate
EFFECTIVE:
JANUARY 1,
2018
3CX-COMPACT BACKHOE LOADER 0121
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
1T Lifting Shackle
Mechanical Excavator Quick Hitch & 1T Shackle
LOADER BUCKETS
GP Shovel - 78 in (2000mm) Width + Mk2 Hydraulic QH + Toeplate
6 In 1 Shovel - 78 in (2000mm) Width + Mk2 Hydraulic QH + Toeplate
All prices and specifications subject to change without notice 6 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
3 - OPTIONS: Continued Back to Index
U.S. LIST
100RA08 $1,210
100RA15 $1,210Front Fenders (Black)
EFFECTIVE:
JANUARY 1,
2018
3CX-COMPACT BACKHOE LOADER 0121
ADDITIONAL OPTIONS
Front Fenders (Yellow)
All prices and specifications subject to change without notice 7 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
2 - NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
U.S. LIST
123 $89,438
100AA09 $0
100AA22 $20,030
100BA01 $0
100BA03 $508
100BA04 $1,569
100BA09 $1,717
100BA11 $2,136
100CA06 $3,172
100CA16 $3,172
100CA17 -$1,866
100DA01 $0
100DA04 $0
100DA08 $0
100EA05 $778
100FA02 $660
100FA13 $2,790
100GA03 $0
100GA04 $0
100GA05 $0
TERRITORY PACKS (E)
English Territory Pack
5/8 Loader Pipework with Smooth Ride System (SRS), Return to Dig (RTD), Constant Flow and Vari-Speed for Skid-
Steer Hydraulic Quick-Hitch
3CX Compact, Model Pack
3CX Compact Potholemaster, Model Pack. Includes: HD Potholemaster Sweeper, 12" Excavator Patch Planer and HM25
Hand-Held Hammer
Canopy Electrics, Livelink. For Mk2 QH.
BACKHOE PIPEWORK: (E)
Hammer Pipework for 10 ft Extending Dipper
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater. For Mk2 QH.
Canopy, Vinyl Suspension Seat. For Mk2 QH.
ENCLOSURE CONTROLS: (E)
Cab Electrics, Livelink. For Mk2 QH.
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater. For skid-steer QH.
Cab Electrics, Livelink. For skid-steer QH.
Spanish Territory Pack
EFFECTIVE:
JANUARY 1,
2018
3CX-COMPACT BACKHOE LOADER 0123
BASE MACHINE (E)
3CX COMPACT, 4WD, 4WS, 74hp T4 Final, 10ft Side-shift Backhoe with Extending Dipper. Battery Isolator, Livelink.
MODEL PACK: (E)
TIRES and TRANSMISSIONS: (E)
JCB Sitemaster Tire set 12.5-18-10
Michelin Power CL 340/80-18
Michelin Power CL 340/80-18 LSD Front and Rear Axle
Michelin Power XP 27 Turf Tire Set 340/65-18
Michelin BIBLOAD Tire Set 340/80 R18
CAB/CANOPY: (E)
French Territory Pack
LOADER PIPEWORK: (E)
3/8 Loader Pipework with Smooth Ride System (SRS) for Mk2 Hydraulic Quick-Hitch
All prices and specifications subject to change without notice 8 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
3 - OPTIONS: Back to Index
U.S. LIST
100HA23 $132
100HA24 $1,474
100JA17 $580
100JA18 $2,229
100JA30 $580
100JA31 $2,229
100KA03 $202
100MA02 $582
100MA05 $654
100MA06 $741
100MA14 $95
100MA40 $626
100NA02 $3,309
100NA04 $1,303
100PA02 $1,577
100PA05 $44
100PA07 $122
Boom & Dipper HBCVs For Use with Hammer Pipework
VEHICLE ELECTRICAL OPTIONS
LED Work Light Pack of 10 (4 front, 4 rear, 2 side)
Rotating Amber Beacon
LED Dipper Mounted Worklight
Excavator Bucket Pivot Pin Set
47in (1200mm) Grading Bucket
HAND HELD TOOL CIRCUITS
9M Hose Reel With Handheld Tool Circuit Pipework & Breaker Mount
BACKHOE BUCKET OPTIONS
12in (300mm) Excavator Bucket
18in (450mm) Excavator Bucket
24in (600mm) Excavator Bucket
EFFECTIVE:
JANUARY 1,
2018
6 In 1 Shovel - 78 in (2000mm) Width + Skid-Steer Hydraulic QH + Toeplate
LOADER BUCKET OPTIONS
6 In 1 Clam Ram Guards
3CX-COMPACT BACKHOE LOADER 0123
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
1T Lifting Shackle
Mechanical Excavator Quick Hitch & 1T Shackle
LOADER BUCKETS
GP Shovel - 78 in (2000mm) Width + Mk2 Hydraulic QH + Toeplate
6 In 1 Shovel - 78 in (2000mm) Width + Mk2 Hydraulic QH + Toeplate
GP Shovel - 78 in (2000mm) Width + Skid-Steer Hydraulic QH + Toeplate
All prices and specifications subject to change without notice 9 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
3 - OPTIONS: Continued Back to Index
U.S. LIST
100RA08 $1,210
100RA15 $1,210Front Fenders (Black)
EFFECTIVE:
JANUARY 1,
2018
3CX-COMPACT BACKHOE LOADER 0123
ADDITIONAL OPTIONS
Front Fenders (Yellow)
All prices and specifications subject to change without notice 10 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
U.S. LIST
125 $89,438
100AA09 $0
100AA22 $20,030
100BA01 $0
100BA03 $508
100BA04 $1,569
100BA09 $1,717
100BA11 $2,136
100CA06 $3,172
100CA16 $3,172
100CA17 -$1,866
100DA01 $0
100DA04 $0
100DA08 $0
100EA22 $778
100FA02 $660
100FA13 $2,790
100GA03 $0
100GA04 $0
100GA05 $0
Cab Electrics, Livelink. For Mk2 QH.
3/8 Loader Pipework with Smooth Ride System (SRS) for Mk2 Hydraulic Quick-Hitch
Cab Electrics, Livelink. For skid-steer QH.
Canopy Electrics, Livelink. For Mk2 QH.
Hammer Pipework for 12 ft Fixed Dipper
LOADER PIPEWORK: (E)
BACKHOE PIPEWORK: (E)
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater. For Mk2 QH.
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater. For skid-steer QH.
Canopy, Vinyl Suspension Seat. For Mk2 QH.
ENCLOSURE CONTROLS: (E)
Michelin Power XP 27 Turf Tire Set 340/65-18
Michelin BIBLOAD Tire Set 340/80 R18
CAB/CANOPY: (E)
3CX Compact, Model Pack
TIRES and TRANSMISSIONS: (E)
JCB Sitemaster Tire set 12.5-18-10
Michelin Power CL 340/80-18
Michelin Power CL 340/80-18 LSD Front and Rear Axle
3CX Compact Potholemaster, Model Pack. Includes: HD Potholemaster Sweeper, 12" Excavator Patch Planer and HM25
Hand-Held Hammer
EFFECTIVE:
JANUARY 1,
2018
3CX-COMPACT BACKHOE LOADER 0125
BASE MACHINE (E)
3CX COMPACT, 4WD, 4WS, 74hp T4 Final, 12ft Side-shift Backhoe with Fixed Dipper. Battery Isolator, Livelink.
Includes Street Pads.
MODEL PACK: (E)
5/8 Loader Pipework with Smooth Ride System (SRS), Return to Dig (RTD), Constant Flow and Vari-Speed for Skid-
TERRITORY PACKS (E)
English Territory Pack
French Territory Pack
Spanish Territory Pack
All prices and specifications subject to change without notice 11 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Back to Index
U.S. LIST
100HA23 $132
100HA24 $1,474
100JA17 $580
100JA18 $2,229
100JA30 $580
100JA31 $2,229
100KA03 $202
100MA02 $582
100MA05 $654
100MA06 $741
100MA14 $95
100MA40 $626
100NA02 $3,309
100NA06 $1,303
100PA02 $1,577
100PA05 $44
100PA07 $122LED Dipper Mounted Worklight
HAND HELD TOOL CIRCUITS
9M Hose Reel With Handheld Tool Circuit Pipework & Breaker Mount
VEHICLE ELECTRICAL OPTIONS
LED Work Light Pack of 10 (4 front, 4 rear, 2 side)
Rotating Amber Beacon
Boom & Dipper HBCVs For Use with Hammer Pipework
Excavator Bucket Pivot Pin Set
47in (1200mm) Grading Bucket
24in (600mm) Excavator Bucket
BACKHOE BUCKET OPTIONS
12in (300mm) Excavator Bucket
18in (450mm) Excavator Bucket
EFFECTIVE:
JANUARY 1,
2018
6 In 1 Shovel - 78 in (2000mm) Width + Skid-Steer Hydraulic QH + Toeplate
LOADER BUCKET OPTIONS
6 In 1 Clam Ram Guards
3CX-COMPACT BACKHOE LOADER 0125
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
1T Lifting Shackle
Mechanical Excavator Quick Hitch & 1T Shackle
LOADER BUCKETS
GP Shovel - 78 in (2000mm) Width + Mk2 Hydraulic QH + Toeplate
6 In 1 Shovel - 78 in (2000mm) Width + Mk2 Hydraulic QH + Toeplate
GP Shovel - 78 in (2000mm) Width + Skid-Steer Hydraulic QH + Toeplate
All prices and specifications subject to change without notice 12 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
U.S. LIST
100RA08 $1,210
100RA15 $1,210
3CX-COMPACT BACKHOE LOADER 0125EFFECTIVE:
JANUARY 1,
2018
ADDITIONAL OPTIONS
Front Fenders (Yellow)
Front Fenders (Black)
All prices and specifications subject to change without notice 13 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
U.S. LIST
127 $92,013
100AA09 $0
100AA22 $20,030
100BA01 $0
100BA03 $508
100BA04 $1,569
100BA09 $1,717
100BA11 $2,136
100CA06 $3,172
100CA16 $3,172
100CA17 -$1,866
100DA01 $0
100DA04 $0
100DA08 $0
100EA25 $778
100FA02 $660
100FA13 $2,790
100GA03 $0
100GA04 $0
100GA05 $0
Cab Electrics, Livelink. For Mk2 QH.
3/8 Loader Pipework with Smooth Ride System (SRS) for Mk2 Hydraulic Quick-Hitch
Cab Electrics, Livelink. For skid-steer QH.
Canopy Electrics, Livelink. For Mk2 QH.
Hammer Pipework for 12 ft Extending Dipper
LOADER PIPEWORK: (E)
BACKHOE PIPEWORK: (E)
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater. For Mk2 QH.
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater. For skid-steer QH.
Canopy, Vinyl Suspension Seat. For Mk2 QH.
ENCLOSURE CONTROLS: (E)
Michelin Power XP 27 Turf Tire Set 340/65-18
Michelin BIBLOAD Tire Set 340/80 R18
CAB/CANOPY: (E)
3CX Compact, Model Pack
TIRES and TRANSMISSIONS: (E)
JCB Sitemaster Tire set 12.5-18-10
Michelin Power CL 340/80-18
Michelin Power CL 340/80-18 LSD Front and Rear Axle
3CX Compact Potholemaster, Model Pack. Includes: HD Potholemaster Sweeper, 12" Excavator Patch Planer and HM25
Hand-Held Hammer
EFFECTIVE:
JANUARY 1,
2018
3CX-COMPACT BACKHOE LOADER 0127
BASE MACHINE (E)
3CX COMPACT, 4WD, 4WS, 74hp T4 Final, 12ft Side-shift Backhoe with Extending Dipper. Battery Isolator, Livelink.
Includes Street Pads.
MODEL PACK: (E)
5/8 Loader Pipework with Smooth Ride System (SRS), Return to Dig (RTD), Constant Flow and Vari-Speed for Skid-
TERRITORY PACKS (E)
English Territory Pack
French Territory Pack
Spanish Territory Pack
All prices and specifications subject to change without notice 14 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Back to Index
U.S. LIST
100HA23 $132
100HA24 $1,474
100JA17 $580
100JA18 $2,229
100JA30 $580
100JA31 $2,229
100KA03 $202
100MA02 $582
100MA05 $654
100MA06 $741
100MA14 $95
100MA40 $626
100NA02 $3,309
100NA06 $1,303
100PA02 $1,577
100PA05 $44
100PA07 $122
LED Work Light Pack of 10 (4 front, 4 rear, 2 side)
Rotating Amber Beacon
LED Dipper Mounted Worklight
HAND HELD TOOL CIRCUITS
9M Hose Reel With Handheld Tool Circuit Pipework & Breaker Mount
Boom & Dipper HBCVs For Use with Hammer Pipework
VEHICLE ELECTRICAL OPTIONS
LOADER BUCKET OPTIONS
6 In 1 Clam Ram Guards
BACKHOE BUCKET OPTIONS
EFFECTIVE:
JANUARY 1,
2018
LOADER BUCKETS
3CX-COMPACT BACKHOE LOADER 0127
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
1T Lifting Shackle
Mechanical Excavator Quick Hitch & 1T Shackle
GP Shovel - 78 in (2000mm) Width + Mk2 Hydraulic QH + Toeplate
6 In 1 Shovel - 78 in (2000mm) Width + Mk2 Hydraulic QH + Toeplate
GP Shovel - 78 in (2000mm) Width + Skid-Steer Hydraulic QH + Toeplate
6 In 1 Shovel - 78 in (2000mm) Width + Skid-Steer Hydraulic QH + Toeplate
12in (300mm) Excavator Bucket
18in (450mm) Excavator Bucket
24in (600mm) Excavator Bucket
Excavator Bucket Pivot Pin Set
47in (1200mm) Grading Bucket
All prices and specifications subject to change without notice 15 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
U.S. LIST
100RA08 $1,210
100RA15 $1,210Front Fenders (Black)
EFFECTIVE:
JANUARY 1,
2018
3CX-COMPACT BACKHOE LOADER 0127
ADDITIONAL OPTIONS
Front Fenders (Yellow)
All prices and specifications subject to change without notice 16 Backhoe Loader USD Price Pages
2018
JCB BACKHOE LOADERS
3CXCENTERMOUNT
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice 17 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA EFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT Back to Index
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able hydraulic fill and fuel cap. All locks operate with ignition key. Front and rear horn buttons.
ENGINE 74 HP Turbocharged, water-cooled, 4 cyl, direct injection diesel, 268 CID (4.4 liter) T4F engine.
Hand and foot throttle. Full flow pressure engine oil lubricant with spin-on filter cartridge.
Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil coolers.
Two stage fuel filtering system utilizing a water/sediment separator and spin-on type filter element.
Dual element air filter, dry type with cleanable outer element, replaceable inner element and under
hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers. with 4 forward and
4 reverse speeds.
FRONT AXLE Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide
automatic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Servo-assisted quick fill brakes. Independent over center actuation, park brake.
Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2WD activated by
brake pedal.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle of 27'2".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
Std dipper features sacrifical steel wear strip. Durable steel fenders and fuel tank.
SAE maximum dig depth: Std dipper - 14' 7", Extradig dipper - 14' 7" - 18' 6". Two lever, JCB (SAE)
backhoe controls. Fabricated stabilizer legs with anti-drift valves and cylinder guards.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig standard. Dump reach at full height - 32".
3CX BACKHOE LOADER
All prices and specifications subject to change without notice 18 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT (CONT.) Back to Index
ELECTRICAL SYSTEM 12 volt system with 95 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., coolant level, engine oil pressure,
engine oil level, transmission oil pressure, transmission oil temp, air cleaner restriction,
water in fuel indicator, windshield washer fluid level and park brake engaged. Light indicators
for hazard flashers on, turn signals, steering mode, and lights on. 12 volt outlet for
powered accessories. Common fuses and relays located in an easy access panel. Main circuit
breakers at battery positive terminal for added circuit protection. Battery Isolator as standard.
OPERATORS Fixed vinyl seat standard. Two side entry with deluxe trim. Steel floor with composite sure grip
ENVIRONMENT mat, front windshield with 2 speed plus intermittent wiper and washer, pre-wired for beacon
and radio, built in speakers, cup holder, twin lockable steel storage compartments.
HYDRAULIC SYSTEM Open center system, twin gear pumps, engine driven, 32.5 gpm. Separate oil reservoir
not shared with other systems, externally mounted to mainframe for ground level
servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts.
SERVICEABILITY Electronic daily check of engine oil and coolant level, air cleaner restriction, water in fuel and
AND MAINTENANCE windshield washer levels through in cab gauge. Ground level check for transmission oil
and brake fluid levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, fuel
and engine coolant. Tilt engine hood and lockable front grill. 42.2 gallon fuel tank. 22 gallon
hydraulic tank with 10 micron filter. 500 hour engine oil and filter service interval. 1000 hour trans-
mission oil and 500 hour transmission filter service interval. 2000 hour hydraulic oil and 500 hour
hydraulic filter service interval. External Toolbox. Auto Check automatically performs daily
maintenance checks on 'key on'
TELEMATICS JCB Livelink telematics. Monitored and managed remotely via a PC or Smartphone. Two year
subscription. Real time reporting of machine hours, routine maintenance alerts, location,
critical health alerts, fuel level/consumption and work cycle information. Ability to set
machine geo-fences and curfews for improved security.
3CX BACKHOE LOADER
All prices and specifications subject to change without notice 19 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
YELLOW SERIES: Back to Index
US LIST
3CX CANOPY PRICE
1605 $70,824
200AX08 $0
200BX08 $4,641
200CX22 $3,318
200DX07 $0
200EX55 $2,975
200GX13 $0
200FX11 $1,051
200JX04 $2,414
200MX01 Backhoe Bucket - 24in (600mm) 1298 0 $1,298
TOTAL $86,521
US LIST
3CX CAB PRICE
1605 $70,824
200AX08 $0
200BX08 $4,641
200CX24 $10,413
200DX09 $0
200EX61 $2,975
200GX14 $0
200FX11 $1,051
200JX04 $2,414
200MX01 $1,298
200RX03 $117
TOTAL $93,733
EFFECTIVE:
JANUARY 1,
2018
3CX, 4WD, 2WS, 74hp T4 Final, 14ft Centermount Backhoe with Extending Dipper. Manual Transmission with Limited Slip
Differential, Manual Controls, and 400lbs Counterweight. Includes 3 Spool Loader Valve with Float and Reset, Flip-over Feet, Stabilizer
Ram Guards, Interior Mirror, Front and Rear Worklights and Battery Isolator.
USA Model Pack
Galaxy Industrial 14-17.5-10 Front & 19.5L-24-12 Rear Tires
Canopy (low roof)
Electrics Pack including LIVELINK
Hammer Pipework
English Territory Pack for Canopy Build
3/8 Loader Pipework, 3 Spool Loader Valve with Return To Dig (RTD)
3CX BACKHOE LOADER
Direct Mount General Purpose Loader Bucket, 88in (2235mm), 1.0yd3 (0.88m3), no Forks.
3CX, 4WD, 2WS, 74hp T4 Final, 14ft Centermount Backhoe with Extending Dipper. Manual Transmission with Limited Slip
Differential, Manual Controls, and 400lbs Counterweight. Includes 3 Spool Loader Valve with Float and Reset, Flip-over Feet, Stabilizer
Ram Guards, Interior Mirror, Front and Rear Worklights and Battery Isolator.
USA Model Pack
Galaxy Industrial 14-17.5-10 Front & 19.5L-24-12 Rear Tires
Cab, A/C (low roof). Includes 110v Engine Block Heater.
Direct Mount General Purpose Loader Bucket, 88in (2235mm), 1.0yd3 (0.88m3), no Forks.
110v Engine Block Heater For Canopy (Standard on Cab builds)
Electrics Pack including LIVELINK for Cab Builds
Hammer Pipework - Cab Builds only
English Territory Pack for Cab Build
3/8 Loader Pipework, 3 Spool Loader Valve with Return To Dig (RTD)
Backhoe Bucket - 24in (600mm)
All prices and specifications subject to change without notice 20 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA
CUSTOM BUILDS AND OPTIONS
1604 $67,219
200AX08 $0
200BX08 $4,641
200CX22 $3,318
200CX24 $10,413
200DX07 $0
200DX09 $0
200EX51 $0
200EX52 $2,975
200EX57 $0
200EX58 $2,975
200FX10 $0
200FX11 $1,051
200GX13 $0
200GX14 $0
200JX03 $0
200JX04 $2,414
200JX05 $6,070
200MX00 $0
200MX01 $1,298
200RX03 $117
Electrics Pack including LIVELINK for Cab Builds
No Auxiliary Pipework
Hammer Pipework
No Auxiliary Pipework - Cab Builds only
Hammer Pipework - Cab Builds only
110v Engine Block Heater For Canopy (Standard on Cab builds)
Direct Mount General Purpose Loader Bucket, 88in (2235mm), 1.0yd3 (0.88m3), no Forks.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 88in (2235mm), 1.3yd3 (1.0m3)
No Backhoe Bucket
Backhoe Bucket - 24in (600mm)
EFFECTIVE:
JANUARY 1, 2018
ESSENTIAL FEATURES (E) - Choose one of each 200alpha selection
USA Model Pack
No Loader Bucket
3CX BACKHOE LOADER 1604
3CX, 4WD, 2WS, 74hp T4 Final, 14ft Centermount Backhoe with Fixed Dipper. Manual Transmission with Limited Slip
Differential, Manual Controls, and 400lbs Counterweight. Includes 3 Spool Loader Valve with Float and Reset, Flip-over
Feet, Stabilizer Ram Guards, Interior Mirror, Front and Rear Worklights and Battery Isolator.
BASE MACHINE (E)
3 Spool Loader Valve with Return To Dig (RTD) No loader Pipework
3/8 Loader Pipework, 3 Spool Loader Valve with Return To Dig (RTD)
English Territory Pack for Canopy Build
English Territory Pack for Cab Build
Canopy (low roof)
OPTIONS
Galaxy Industrial 14-17.5-10 Front & 19.5L-24-12 Rear Tires
Cab, A/C (low roof). Includes 110v Engine Block Heater.
Electrics Pack including LIVELINK
All prices and specifications subject to change without notice 21 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA
CUSTOM BUILDS AND OPTIONS
1617 $69,794
200AX08 $0
200BX08 $4,641
200CX34 $3,318
200DX07 $0
200EX77 $0
200EX78 $2,975
200FX10 $0
200FX11 $1,051
200GX37 $0
200JX03 $0
200JX04 $2,414
200JX05 $6,070
200MX00 $0
200MX01 $1,298
200RX03 $117
English Territory Pack for Canopy Builds
110v Engine Block Heater For Canopy (Standard on Cab builds)
OPTIONS
No Loader Bucket
Direct Mount General Purpose Loader Bucket, 88in (2235mm), 1.0yd3 (0.88m3), no Forks.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 88in (2235mm), 1.3yd3 (1.0m3)
No Backhoe Bucket
Backhoe Bucket - 24in (600mm)
EFFECTIVE:
JANUARY 1, 2018
No Auxiliary Pipework
Hammer Pipework
3 Spool Loader Valve with Return To Dig (RTD) No loader Pipework
3/8 Loader Pipework, 3 Spool Loader Valve with Return To Dig (RTD)
3CX BACKHOE LOADER 1617
Galaxy Industrial 14-17.5-10 Front & 19.5L-24-12 Rear Tires
Canopy (low roof), Easy Controls
Electrics Pack including LIVELINK
BASE MACHINE (E)
3CX, 4WD, 2WS, 74hp T4 Final, 14ft Centermount Backhoe with Fixed Dipper. Manual Transmission with Limited Slip
Differential, Easy Controls, and 400lbs Counterweight. Includes 3 Spool Loader Valve with Float and Reset, Flip-over
Feet, Stabilizer Ram Guards, Interior Mirror, Front and Rear Worklights and Battery Isolator.
ESSENTIAL FEATURES (E) - Choose one of each 200alpha selection
USA Model Pack
All prices and specifications subject to change without notice 22 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA
CUSTOM BUILDS AND OPTIONS
1605 $70,824
200AX08 $0
200BX08 $4,641
200CX22 $3,318
200CX24 $10,413
200DX07 $0
200DX09 $0
200EX54 $0
200EX55 $2,975
200EX60 $0
200EX61 $2,975
200FX10 $0
200FX11 $1,051
200GX13 $0
200GX14 $0
200JX03 $0
200JX04 $2,414
200JX05 $6,070
200MX00 $0
200MX01 $1,298
200RX03 $117
3CX BACKHOE LOADER 1605
Electrics Pack including LIVELINK for Cab Builds
No Auxiliary Pipework
Hammer Pipework
BASE MACHINE (E)
USA Model Pack
Galaxy Industrial 14-17.5-10 Front & 19.5L-24-12 Rear Tires
Canopy (low roof)
Cab, A/C (low roof). Includes 110v Engine Block Heater.
ESSENTIAL FEATURES (E) - Choose one of each 200alpha selection
EFFECTIVE:
JANUARY 1, 2018
110v Engine Block Heater For Canopy (Standard on Cab builds)
Hammer Pipework - Cab Builds only
3 Spool Loader Valve with Return To Dig (RTD) No loader Pipework
3/8 Loader Pipework, 3 Spool Loader Valve with Return To Dig (RTD)
English Territory Pack for Canopy Build
English Territory Pack for Cab Build
OPTIONS
No Loader Bucket
Direct Mount General Purpose Loader Bucket, 88in (2235mm), 1.0yd3 (0.88m3), no Forks.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 88in (2235mm), 1.3yd3 (1.0m3)
No Backhoe Bucket
Backhoe Bucket - 24in (600mm)
No Auxiliary Pipework - Cab Builds only
3CX, 4WD, 2WS, 74hp T4 Final, 14ft Centermount Backhoe with Extending Dipper. Manual Transmission with Limited
Slip Differential, Manual Controls, and 400lbs Counterweight. Includes 3 Spool Loader Valve with Float and Reset, Flip-
over Feet, Stabilizer Ram Guards, Interior Mirror, Front and Rear Worklights and Battery Isolator.
Electrics Pack including LIVELINK
All prices and specifications subject to change without notice 23 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA
CUSTOM BUILDS AND OPTIONS
1618 $73,399
200AX08 $0
200BX08 $4,641
200CX34 $3,318
200DX07 $0
200EX79 $0
200EX80 $2,975
200FX10 $0
200FX11 $1,051
200GX37 $0
200JX03 $0
200JX04 $2,414
200JX05 $6,070
200MX00 $0
200MX01 $1,298
200RX03 $117110v Engine Block Heater For Canopy (Standard on Cab builds)
No Loader Bucket
Direct Mount General Purpose Loader Bucket, 88in (2235mm), 1.0yd3 (0.88m3), no Forks.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 88in (2235mm), 1.3yd3 (1.0m3)
No Backhoe Bucket
Backhoe Bucket - 24in (600mm)
EFFECTIVE:
JANUARY 1, 2018
USA Model Pack
Canopy (low roof), Easy Controls
Electrics Pack including LIVELINK
OPTIONS
Galaxy Industrial 14-17.5-10 Front & 19.5L-24-12 Rear Tires
No Auxiliary Pipework
3 Spool Loader Valve with Return To Dig (RTD) No loader Pipework
Hammer Pipework
3/8 Loader Pipework, 3 Spool Loader Valve with Return To Dig (RTD)
English Territory Pack for Canopy Builds
ESSENTIAL FEATURES (E) - Choose one of each 200alpha selection
3CX BACKHOE LOADER 1618
3CX, 4WD, 2WS, 74hp T4 Final, 14ft Centermount Backhoe with Extending Dipper. Manual Transmission with Limited
Slip Differential, Easy Controls, and 400lbs Counterweight. Includes 3 Spool Loader Valve with Float and Reset, Flip-over
Feet, Stabilizer Ram Guards, Interior Mirror, Front and Rear Worklights and Battery Isolator.
BASE MACHINE (E)
All prices and specifications subject to change without notice 24 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA
CUSTOM BUILDS AND OPTIONS
1630 $67,219
200AX15 $0
200BX36 $4,641
200CX39 $3,318
200CX40 $10,413
200DX07 $0
200DX09 $0
200EX85 $0
200EX86 $2,975
200EX89 $0
200EX90 $2,975
200FX09 $0
200FX12 $1,051
200GX50 $0
200GX51 $0
200JX03 $0
200JX04 $2,414
200JX05 $6,070
200JX11 $2,769
200JX12 $6,424
200MX00 $0
200MX01 $1,298
200RX03 $117
200RX16 $2,142
USA Model Pack
3CX BACKHOE LOADER 1630EFFECTIVE:
JANUARY 1, 2018
BASE MACHINE (E)
3CX, 4WD, 2WS, 74hp T4 Final, 14ft Centermount Backhoe with Fixed Dipper. Manual Transmission with Limited Slip
Differential, Manual Controls, and 400lbs Counterweight. Includes 3 Spool Loader Valve with Float and Reset, Flip-over
Feet, Stabilizer Ram Guards, Interior Mirror, Front and Rear Worklights and Battery Isolator.
ESSENTIAL FEATURES (E) - Choose one of each 200alpha selection
English Territory Pack for Canopy Build
Galaxy Industrial 14-17.5-10 Front & 19.5L-24-12 Rear Tires
Canopy (low roof)
Cab, A/C (low roof). Includes 110v Engine Block Heater.
Electrics Pack including LIVELINK
Electrics Pack including LIVELINK for Cab Builds
No Auxiliary Pipework
Hammer Pipework
No Auxiliary Pipework
Hammer Pipework
3 Spool Loader Valve with Return To Dig (RTD) No loader Pipework
3/8 Loader Pipework, 3 Spool Loader Valve with Return To Dig (RTD)
English Territory Pack for Cab Build
OPTIONS
No Loader Bucket
Direct Mount General Purpose Loader Bucket, 88in (2235mm), 1.0yd3 (0.88m3), no Forks.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 88in (2235mm), 1.3yd3 (1.0m3)
Backhoe Bucket - 24in (600mm)
110v Engine Block Heater For Canopy (Standard on Cab builds)
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting
Mechanical Quick Hitch with 1 Ton Shackle
No Backhoe Bucket
All prices and specifications subject to change without notice 25 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA
CUSTOM BUILDS AND OPTIONS
1632 $69,794
200AX15 $0
200BX36 $4,641
200CX41 $3,318
200DX07 $0
200EX81 $0
200EX82 $2,975
200FX09 $0
200FX12 $1,051
200GX52 $0
200JX03 $0
200JX04 $2,414
200JX05 $6,070
200JX11 $2,769
200JX12 $6,424
200MX00 $0
200MX01 $1,298
200RX03 $117
200RX16 $2,142
3 Spool Loader Valve with Return To Dig (RTD) No loader Pipework
3CX BACKHOE LOADER 1632EFFECTIVE:
JANUARY 1, 2018
BASE MACHINE (E)
3CX, 4WD, 2WS, 74hp T4 Final, 14ft Centermount Backhoe with Fixed Dipper. Manual Transmission with Limited Slip
Differential, Easy Controls, and 400lbs Counterweight. Includes 3 Spool Loader Valve with Float and Reset, Flip-over
Feet, Stabilizer Ram Guards, Interior Mirror, Front and Rear Worklights and Battery Isolator.
ESSENTIAL FEATURES (E) - Choose one of each 200alpha selection
USA Model Pack
Galaxy Industrial 14-17.5-10 Front & 19.5L-24-12 Rear Tires
Canopy (low roof), Easy Controls
Electrics Pack including LIVELINK
No Auxiliary Pipework
Hammer Pipework
Mechanical Quick Hitch with 1 Ton Shackle
3/8 Loader Pipework, 3 Spool Loader Valve with Return To Dig (RTD)
English Territory Pack for Canopy Builds
OPTIONS
No Loader Bucket
Direct Mount General Purpose Loader Bucket, 88in (2235mm), 1.0yd3 (0.88m3), no Forks.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 88in (2235mm), 1.3yd3 (1.0m3)
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting
No Backhoe Bucket
Backhoe Bucket - 24in (600mm)
110v Engine Block Heater For Canopy (Standard on Cab builds)
All prices and specifications subject to change without notice 26 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA
CUSTOM BUILDS AND OPTIONS
1631 $70,824
200AX15 $0
200BX36 $4,641
200CX39 $3,318
200CX40 $10,413
200DX07 $0
200DX09 $0
200EX87 $0
200EX88 $2,975
200EX91 $0
200FX09 $0
200FX12 $1,051
200GX50 $0
200GX51 $0
200JX03 $0
200JX04 $2,414
200JX05 $6,070
200JX11 $2,769
200JX12 $6,424
200MX00 $0
200MX01 $1,298
200RX03 $117
200RX16 $2,142
No Auxiliary Pipework
3CX BACKHOE LOADER 1631EFFECTIVE:
JANUARY 1, 2018
BASE MACHINE (E)
3CX, 4WD, 2WS, 74hp T4 Final, 14ft Centermount Backhoe with Extending Dipper. Manual Transmission with Limited
Slip Differential, Manual Controls, and 400lbs Counterweight. Includes 3 Spool Loader Valve with Float and Reset, Flip-
over Feet, Stabilizer Ram Guards, Interior Mirror, Front and Rear Worklights and Battery Isolator.
ESSENTIAL FEATURES (E) - Choose one of each 200alpha selection
USA Model Pack
Galaxy Industrial 14-17.5-10 Front & 19.5L-24-12 Rear Tires
Canopy (low roof)
Cab, A/C (low roof). Includes 110v Engine Block Heater.
Electrics Pack including LIVELINK
Electrics Pack including LIVELINK for Cab Builds
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Hammer Pipework
No Auxiliary Pipework
3 Spool Loader Valve with Return To Dig (RTD) No loader Pipework
3/8 Loader Pipework, 3 Spool Loader Valve with Return To Dig (RTD)
English Territory Pack for Canopy Build
English Territory Pack for Cab Build
OPTIONS
No Loader Bucket
Direct Mount General Purpose Loader Bucket, 88in (2235mm), 1.0yd3 (0.88m3), no Forks.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 88in (2235mm), 1.3yd3 (1.0m3)
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting
No Backhoe Bucket
Backhoe Bucket - 24in (600mm)
110v Engine Block Heater For Canopy (Standard on Cab builds)
Mechanical Quick Hitch with 1 Ton Shackle
All prices and specifications subject to change without notice 27 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA
CUSTOM BUILDS AND OPTIONS
1633 $73,399
200AX15 $0
200BX36 $4,641
200CX41 $3,318
200DX07 $0
200EX83 $0
200EX84 $2,975
200FX09 $0
200FX12 $1,051
200GX52 $0
200JX03 $0
200JX04 $2,414
200JX05 $6,070
200JX11 $2,769
200JX12 $6,424
200MX00 $0
200MX01 $1,298
200RX03 $117
200RX16 $2,142
3 Spool Loader Valve with Return To Dig (RTD) No loader Pipework
3CX BACKHOE LOADER 1633EFFECTIVE:
JANUARY 1, 2018
BASE MACHINE (E)
3CX, 4WD, 2WS, 74hp T4 Final, 14ft Centermount Backhoe with Extending Dipper. Manual Transmission with Limited
Slip Differential, Easy Controls, and 400lbs Counterweight. Includes 3 Spool Loader Valve with Float and Reset, Flip-over
Feet, Stabilizer Ram Guards, Interior Mirror, Front and Rear Worklights and Battery Isolator.
ESSENTIAL FEATURES (E) - Choose one of each 200alpha selection
USA Model Pack
Galaxy Industrial 14-17.5-10 Front & 19.5L-24-12 Rear Tires
Canopy (low roof), Easy Controls
Electrics Pack including LIVELINK
No Auxiliary Pipework
Hammer Pipework
Mechanical Quick Hitch with 1 Ton Shackle
3/8 Loader Pipework, 3 Spool Loader Valve with Return To Dig (RTD)
English Territory Pack for Canopy Builds
OPTIONS
No Loader Bucket
Direct Mount General Purpose Loader Bucket, 88in (2235mm), 1.0yd3 (0.88m3), no Forks.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 88in (2235mm), 1.3yd3 (1.0m3)
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting
No Backhoe Bucket
Backhoe Bucket - 24in (600mm)
110v Engine Block Heater For Canopy (Standard on Cab builds)
All prices and specifications subject to change without notice 28 Backhoe Loader USD Price Pages
2018
JCB BACKHOE LOADER
3CX-14CENTERMOUNT
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice 29 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
EFFECTIVE:
JANUARY 1, 2018
STANDARD EQUIPMENT Back to Index
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks operate with ignition key. Front and rear horn buttons.
Automatic backup alarm.
ENGINE 74HP gross, turbocharged, water-cooled,4 cyl, direct injection diesel. T4F compliant engine.
Hand and foot throttle. SelectiveFull flow pressure engine oil lubrication with spin-on filter cartridge.
Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil coolers.
Two stage fuel filtering system utilizing a water/sediment separator and spin-on type filter element. Dual
element air filter, dry type with cleanable outer element, replaceable inner element and under
hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Manually operated transmission. disconnect on gear shift and loader levers. Manual gear selection
with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake. Transmission shifts
to neutral when park brake is activated. 4 wheel braking in 2 wheel drive activated by switch.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle - 26' 5".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Extradig dipper - 14' 7" - 18' 6". Advanced EasyControl backhoe controls.
Fabricated stabilizer legs with anti-drift valves.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 32".
Auto Smooth Ride System (AutoSRS).
3CX-14 BACKHOE LOADER F.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice 30 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
EFFECTIVE: MARCH
1, 2015
STANDARD EQUIPMENT (CONT.) Back to Index
ELECTRICAL SYSTEM 12 volt system with 95 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs. AutoTHROTLE returns engine speed to pre-set hand throttle
position when work is resumed. AutoDRIVE provies cruise control-type characteristics during roading.
AutoSTABILIZERS and AutoBOOMLOCK.
HYDRAULIC SYSTEM Open center system, variable displacement piston pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts. Auto Idle reduces engine speed
when no hydraulic functions are requested.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 42.5 gallon fuel tank. 22 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval.
1000 hour transmission oil and 500 hour transmission filter service interval.
2000 hour hydraulic oil and 500 hour hydraulic filter service interval. External Toolbox.
AutoCHECK automatically performs daily under hood maintenance checks on 'key on'
TELEMATICS JCB Livelink telematics. Monitored and managed remotely via a PC or Smartphone. Two year
subscription. Real time reporting of machine hours, routine maintenance alerts, location,
critical health alerts, fuel level/consumption and work cycle information. Ability to set
machine geo-fences and curfews for improved security.
3CX-14 BACKHOE LOADER F.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice 31 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EN7 $72,369
200AM23 $0
200B7WB $6,083
200B7XD $4,701
200CF30 $15,586
200DE84 $0
200EQ91 $0
200EQ92 $2,975
200EQ93 $5,307
200EQ94 $11,588
200EQ95 $11,588
200EY28 $5,307
200EY29 $11,588
200EY30 $11,588
200FC90 $0
200FD03 $3,088
200FD05 $3,088
200GA71 $0
200GA72 $0
200GA73 $0
200GA74 $0
200GA75 $0
200GA76 $0
3CX-14, 4WD, 2WS, 74hp T4 Final, 14ft Centermount backhoe with Fixed Dipper. 95A Alternator, Battery Isolator,
Livelink and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle). Includes Flipover Feet and Telescopic
Steering Wheel.
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Manual Transmission with LSD, 4WD/2WS
BASE MACHINE (E)
MODEL PACK: (E)
3CX-14 74hp CM Model Pack, Advanced Easy Controls
TIRES and TRANSMISSIONS: (E)
LOADER PIPEWORK: (E)
Spanish Territory Pack For Use with Thumb
5/8 Loader Pipework, Return To Dig (RTD) & Auto SRS, 3 Spool Float & Reset
5/8 Loader Pipework, Return To Dig (RTD) & Auto SRS, 3 Spool Float & Reset for Bi-Directional Circuit
TERRITORY PACKS (E)
English Territory Pack
No Loader Pipework. Includes Return To Dig (RTD)
English Territory Pack For Use with Thumb
French Territory Pack
French Territory Pack For Use with Thumb
Spanish Territory Pack
Hydraulic Thumb (Not For Quick Hitch Use) for Cab
Hammer/Bi-Directional Pipework for Canopy
Hydraulic Thumb (Not For Quick Hitch Use) for Canopy
Hydraulic Thumb (For Quick Hitch Use) for Canopy
EFFECTIVE:
JANUARY 1, 2018
CAB/CANOPY: (E)
ENCLOSURE CONTROLS: (E)
Hammer/Bi-Directional Pipework for Cab
Hydraulic Thumb (For Quick Hitch Use) for Cab
Cab, LIVELINK
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
Hammer Pipework for Cab
Cab with A/C, Heated Air Suspension Seat - Low Roof. Not Compatible with LED light or Road light Package. Includes
110v Engine Block Heater.
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Manual Transmission with LSD, 4WD/2WS
3CX-14 BACKHOE LOADER 2EN7
All prices and specifications subject to change without notice 32 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
OPTIONS: Back to Index
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA82 $2,769
200JA85 $5,806
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA25 $4,660
200NA26 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
Rotating Amber Beacon
9M Hose Reel with Hand Held Tool Circuit
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
VEHICLE ELECTRICAL OPTIONS
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
HAND HELD TOOL CIRCUITS
EFFECTIVE:
JANUARY 1,
2018
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Excavator Bucket Pivot Pin Set
Headlights
3CX-14 BACKHOE LOADER 2EN7
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Q-Fit Tool Carrier Quick Hitch
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard
Duty with Bolt on Cutting Edge
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty
with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge
for use with Thumb
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Code Required For Excavator Quickhtes
LOADER BUCKETS
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting
Edge.
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
110v Engine Block Heater For Canopy (Standard on Cab builds)
All prices and specifications subject to change without notice 33 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
200RA01 $303
200RA02 $531
200RA20 $184
200RA36 $83
200RA37 $88
200RA56 $455
200RA57 $450
200RA59 $590
200RA68 $0AEC Canopy Adjustments
Seat Headrest
Seatbelt (3in)
Flipover Stabilizer Feet - Centermount
Front Fenders
Stabilizer Ram Guards - Centermount
Exterior Mirrors (2)
EFFECTIVE:
JANUARY 1,
2018
3CX-14 BACKHOE LOADER 2EN7
ADDITIONAL OPTIONS
220lb (100kg) Counterweight
397lb (180kg) Counterweight 2WS Only
All prices and specifications subject to change without notice 34 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EN6 $75,974
200AM23 $0
200B7WB $6,083
200B7XD $4,701
200CF30 $15,586
200DE84 $0
200EQ81 $0
200EQ82 $2,975
200EQ83 $5,307
200EQ84 $11,588
200EQ85 $11,588
200FC90 $0
200FD03 $3,088
200FD05 $3,088
200GA71 $0
200GA72 $0
200GA73 $0
200GA74 $0
200GA75 $0
200GA76 $0
3CX-14, 4WD, 2WS, 74hp T4 Final, 14ft Centermount backhoe with ExtraDig Extending Dipper. 95A Alternator, Battery
Isolator, Livelink and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle). Includes Flipover Feet and Telescopic
Steering Wheel.
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Manual Transmission with LSD, 4WD/2WS
English Territory Pack For Use with Thumb
5/8 Loader Pipework, Return To Dig (RTD) & Auto SRS, 3 Spool Float & Reset
5/8 Loader Pipework, Return To Dig (RTD) & Auto SRS, 3 Spool Float & Reset for Bi-Directional Circuit
TERRITORY PACKS (E)
English Territory Pack
No Loader Pipework. Includes Return To Dig (RTD)
3CX-14 74hp CM Model Pack, Advanced Easy Controls
TIRES and TRANSMISSIONS: (E)
Cab with A/C, Heated Air Suspension Seat - Low Roof. Not Compatible with LED light or Road light Package. Includes 110v
Engine Block Heater.
Cab, LIVELINK
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Manual Transmission with LSD, 4WD/2WS
CAB/CANOPY: (E)
French Territory Pack
French Territory Pack For Use with Thumb
Spanish Territory Pack
Spanish Territory Pack For Use with Thumb
EFFECTIVE:
JANUARY 1, 2018
LOADER PIPEWORK: (E)
ENCLOSURE CONTROLS: (E)
Hydraulic Thumb (Not For Quick Hitch Use) for Cab
Hydraulic Thumb (For Quick Hitch Use) for Cab
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
Hammer Pipework for Cab
Hammer/Bi-Directional Pipework for Cab
3CX-14 BACKHOE LOADER 2EN6
BASE MACHINE (E)
MODEL PACK: (E)
All prices and specifications subject to change without notice 35 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
OPTIONS: Back to Index
200HA42 $4,435
200HA43 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA82 $2,769
200JA85 $5,806
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA25 $4,660
200NA26 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
110v Engine Block Heater For Canopy (Standard on Cab builds)
Headlights
Rotating Amber Beacon
9M Hose Reel with Hand Held Tool Circuit
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
HAND HELD TOOL CIRCUITS
VEHICLE ELECTRICAL OPTIONS
BACKHOE BUCKET OPTIONS
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Excavator Bucket Pivot Pin Set
Q-Fit Mounted Fork Frame and 48in Forks.
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
LOADER BUCKET OPTIONS
EFFECTIVE:
JANUARY 1, 2018
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on
Cutting Edge
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
3CX-14 BACKHOE LOADER 2EN6
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Q-Fit Tool Carrier Quick Hitch
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Code Required For Excavator Quickhtes
LOADER BUCKETS
Hydraulic Excavator Quick Hitch (HMR) with Lifting Kit and 5T Shackle
All prices and specifications subject to change without notice 36 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
200RA01 $303
200RA02 $531
200RA05 $933
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA56 $455
200RA57 $450
200RA59 $590
200RA68 $0
Stabilizer Ram Guards - Centermount
AEC Canopy Adjustments
Exterior Mirrors (2)
Seat Headrest
Seatbelt (3in)
Flipover Stabilizer Feet - Centermount
Front Fenders
750lb (340kg) Counterweight
AutoPRE-HEAT
EFFECTIVE:
JANUARY 1,
2018
3CX-14 BACKHOE LOADER 2EN6
ADDITIONAL OPTIONS
220lb (100kg) Counterweight
397lb (180kg) Counterweight 2WS Only
All prices and specifications subject to change without notice 37 Backhoe Loader USD Price Pages
2018
JCB BACKHOE LOADER
3CX-14 SUPERCENTERMOUNT
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice 38 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA EFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT Back to Index
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks with the exception of the Diesel Exhaust Fluid (DEF) tank
operate with ignition key. Front and rear horn buttons. Automatic backup alarm.
ENGINE 91HP gross (109HP gross option), turbocharged, water-cooled, 4 cyl, direct injection diesel. T4F compliant
engine with Selective Catalytic Reduction (SCR) and 5 gallon DEF tank. Hand and foot throttle. Selective
full flow pressure engine oil lubrication with spin-on filter cartridge. Air to fluid coolers. Separately
serviceable radiator, hydraulic and transmission oil coolers. Two stage fuel filtering system utilizing a
water/sediment separator and spin-on type filter element. Dual element air filter, dry type with cleanable
outer element, replaceable inner element and under hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear selection
with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake. Transmission shifts
to neutral when park brake is activated. 4 wheel braking in 2 wheel drive activated by switch.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle - 26' 5".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Extradig dipper - 14' 7" - 18' 6". EasyControl backhoe controls.
Fabricated stabilizer legs with anti-drift valves. 11,000 lb. lifting hook as standard.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 32".
Auto Smooth Ride System (AutoSRS). Front bumper protection fitted as standard.
3CX-14 SUPER BACKHOE LOADER
All prices and specifications subject to change without notice 39 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT (CONT.) Back to Index
ELECTRICAL SYSTEM 12 volt system with 150 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs. AutoTHROTLE returns engine speed to pre-set hand throttle
position when work is resumed. AutoDRIVE provies cruise control-type characteristics during roading.
Advanced Easy Controls and Easy Controls only: AutoSTABILIZERS and AutoBOOMLOCK.
HYDRAULIC SYSTEM Open center system, variable displacement piston pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts. Auto Idle reduces engine speed
when no hydraulic functions are requested.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 40 gallon fuel tank. 20 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval.
1000 hour DEF filter interval. 1000 hour transmission oil and 500 hour transmission filter service
interval. 2000 hour hydraulic oil and 500 hour hydraulic filter service interval. External Toolbox.
AutoCHECK automatically performs daily under hood maintenance checks on 'key on'
TELEMATICS JCB Livelink telematics. Monitored and managed remotely via a PC or Smartphone. Two year
subscription. Real time reporting of machine hours, routine maintenance alerts, location,
critical health alerts, fuel level/consumption and work cycle information. Ability to set
machine geo-fences and curfews for improved security.
3CX-14 SUPER BACKHOE LOADER
All prices and specifications subject to change without notice 40 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EG0 $82,154
200AM05 $0
200B4BE $10,167
200B4BF $11,088
200B4BJ $12,932
200B7UE $8,323
200B7UF $9,246
200B7UJ $11,088
200B7VE $6,942
200B7VF $7,863
200B7VJ $9,516
200CF06 $3,882
200CF08 $15,586
200DE24 $0
200DE30 $0
200EB91 $0
200EB92 $2,975
200EB93 $5,307
200EB94 $11,588
200EB95 $11,588
200FD83 $0
200FD85 $1,051
200FD93 $1,051
200GA29 $0
200GA36 $0
200GA43 $0
200GA50 $0
200GA57 $0
French Territory Pack
French Territory Pack For Use with Thumb
Spanish Territory Pack
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
English Territory Pack For Use with Thumb
LOADER PIPEWORK: (E)
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
5/8 Loader Pipework, Return To Dig (RTD) & Auto SRS, 3 Spool Float, Reset and Detent
TERRITORY PACKS (E)
English Territory Pack
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset and Detent for Bi-Directional Circuit.
ENCLOSURE CONTROLS: (E)
BASE MACHINE (E)
3CX-14 SUPER BACKHOE LOADER 2EG0
3CX-14 SUPER, 4WD, 2WS, 91hp T4F, 14ft Centermount Backhoe with ExtraDig Extending Dipper. Includes 150A
Alternator, 400lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear
Worklights, Battery Isolator and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle).
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD, 4WD/2WS
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
EFFECTIVE:
JANUARY 1, 2018
Hydraulic Thumb (Not For Quick Hitch Use)
Canopy, Vinyl Suspension Seat
Cab with A/C, Cloth Suspension Seat.. Includes 110v Engine Block Heater.
Canopy, LIVELINK
Cab, LIVELINK
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
Hammer Pipework
Hammer/Bi-Directional Pipework
Hydraulic Thumb (For Quick Hitch Use)
Michelin XMCL 340/80-18 & 440/80-28 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
MODEL PACK: (E)
3CX-14 Super 91hp CM 4WD Model Pack, Manual Controls
TIRES and TRANSMISSIONS: (E)
CAB/CANOPY: (E)
All prices and specifications subject to change without notice 41 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
OPTIONS: Back to Index
200HA50 $2,142
200HA87 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA31 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
Rotating Amber Beacon
Headlights
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
110v Engine Block Heater For Canopy (Standard on Cab builds)
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
VEHICLE ELECTRICAL OPTIONS
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
Excavator Bucket Pivot Pin Set
Code Required For Excavator Quickhtes
LOADER BUCKETS
EFFECTIVE:
JANUARY 1,
2018
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
3CX-14 SUPER BACKHOE LOADER 2EG0
Q-Fit Tool Carrier Quick Hitch
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on
Cutting Edge
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
All prices and specifications subject to change without notice 42 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
200RA05 $933
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA59 $590
200RA77 $1,104LED Worklights
Stabilizer Ram Guards - Centermount
Seatbelt (3in)
750lb (340kg) Counterweight
AutoPRE-HEAT
Exterior Mirrors (2)
EFFECTIVE:
JANUARY 1,
2018
3CX-14 SUPER BACKHOE LOADER 2EG0
ADDITIONAL OPTIONS
Seat Headrest
Front Fenders
All prices and specifications subject to change without notice 43 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EK4 $84,729
200AM12 $0
200B4BE $10,167
200B4BF $11,088
200B4BJ $12,932
200B7UE $8,323
200B7UF $9,246
200B7UJ $11,088
200B7VE $6,942
200B7VF $7,863
200B7VJ Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS $9,516
200CF17 $3,882
200CF19 $15,586
200DE42 $0
200DE48 $0
200EJ46 $0
200EJ47 $2,975
200EJ48 $5,307
200EJ49 $11,588
200EJ50 $11,588
200FD98 $0
200FD99 $1,051
200FE04 $1,051
200GA29 $0
200GA36 $0
200GA43 $0
200GA50 $0
200GA57 $0
French Territory Pack
French Territory Pack For Use with Thumb
Spanish Territory Pack
BASE MACHINE (E)
MODEL PACK: (E)
3CX-14 Super 91hp CM Model Pack, Easy Controls
TIRES and TRANSMISSIONS: (E)
CAB/CANOPY: (E)
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
ENCLOSURE CONTROLS: (E)
Canopy, LIVELINK
Cab, LIVELINK
TERRITORY PACKS (E)
English Territory Pack
English Territory Pack For Use with Thumb
BACKHOE PIPEWORK: (E)
EFFECTIVE:
JANUARY 1,
2018
Canopy, Vinyl Suspension Seat
3CX-14 SUPER BACKHOE LOADER 2EK4
3CX-14 SUPER, 4WD, 2WS, 91hp T4F, 14ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator, 400lbs Counterweight. Includes 3
Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive
and AutoThrottle) and Telescopic Steering Wheel.
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD, 4WD/2WS
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Michelin XMCL 340/80-18 & 440/80-28 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
LOADER PIPEWORK: (E)
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool Float & Reset
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
No Auxiliary Pipework
Hammer Pipework
Hammer/Bi-Directional Pipework
Hydraulic Thumb (Not For Quick Hitch Use)
Hydraulic Thumb (For Quick Hitch Use)
All prices and specifications subject to change without notice 44 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
OPTIONS: Back to Index
200HA50 $2,142
200HA90 $4,435
200HA91 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA27 $4,660
200NA29 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
Headlights
9M Hose Reel with Hand Held Tool Circuit
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
VEHICLE ELECTRICAL OPTIONS
HAND HELD TOOL CIRCUITS
Rotating Amber Beacon
110v Engine Block Heater For Canopy (Standard on Cab builds)
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
Excavator Bucket Pivot Pin Set
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Q-Fit Tool Carrier Quick Hitch
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
LOADER BUCKETS
LOADER BUCKET OPTIONS
EFFECTIVE:
JANUARY 1, 2018
Code Required For Excavator Quickhtes
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on Cutting
Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
3CX-14 SUPER BACKHOE LOADER 2EK4
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
All prices and specifications subject to change without notice 45 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
200RA05 $933
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA59 $590
200RA77 $1,104LED Worklights
Stabilizer Ram Guards - Centermount
Seatbelt (3in)
750lb (340kg) Counterweight
AutoPRE-HEAT
Exterior Mirrors (2)
EFFECTIVE:
JANUARY 1,
2018
3CX-14 SUPER BACKHOE LOADER 2EK4
ADDITIONAL OPTIONS
Seat Headrest
Front Fenders
All prices and specifications subject to change without notice 46 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
BASE MACHINE (E)
2EP1 $87,304
200AM24 $0
200B4DE $10,167
200B4DF $11,088
200B4DJ $12,932
200B7WD $8,323
200B7WF $9,246
200B7WJ $11,088
200B7XE $6,942
200B7XF $7,863
200B7XJ $9,707
200CF31 $3,882
200CF33 $15,586
200DE60 $0
200DE66 $0
200EQ76 $0
200EQ77 $2,975
200EQ78 $5,307
200EQ79 $11,588
200EQ80 $11,588
200EY19 $5,307
200EY20 $11,588
200EY21 $11,588
200FE07 $0
200FE08 $1,051
200FE09 $1,051
200FF77 $1,051
200GA29 $0
200GA36 $0
200GA43 $0
200GA50 $0
200GA57 $0
French Territory Pack For Use with Thumb
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool Float & Reset for Hammer Circuit.
TERRITORY PACKS (E)
English Territory Pack
Spanish Territory Pack
English Territory Pack For Use with Thumb
French Territory Pack
Cab, LIVELINK
BACKHOE PIPEWORK: (E)
Hydraulic Thumb (Not For Quick Hitch Use) for Canopy
Hammer/Bi-Directional Pipework, for Canopy
Hammer Pipework
No Auxiliary Pipework
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool Float & Reset
LOADER PIPEWORK: (E)
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
Hammer/Bi-Directional Pipework, for Cab
Hydraulic Thumb (Not For Quick Hitch Use) for Cab
Hydraulic Thumb (For Quick Hitch Use) for Cab
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Michelin XMCL 340/80-18 & 440/80-28 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
MODEL PACK: (E)
3CX-14 Super 91hp CM Model Pack, Advanced Easy Controls
TIRES and TRANSMISSIONS: (E)
EFFECTIVE:
JANUARY 1,
2018
CAB/CANOPY: (E)
Hydraulic Thumb (For Quick Hitch Use) for Canopy
Canopy, Vinyl Suspension Seat
Cab with A/C, Heated Air Suspension Seat. Includes 110v Engine Block Heater.
ENCLOSURE CONTROLS: (E)
Canopy, LIVELINK
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD, 4WD/2WS
3CX-14 SUPER BACKHOE LOADER 2EP1
3CX-14 SUPER, 4WD, 2WS, 91hp T4F, 14ft Centermount Backhoe with Extradig Extending Dipper. 150A
Alternator, 400lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear
Worklights, Battery Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and
Telescopic Steering Wheel.
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD, 4WD/2WS
All prices and specifications subject to change without notice 47 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
OPTIONS: Back to Index
200HA50 $2,142
200HA92 $4,435
200HA93 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA25 $4,660
200NA26 $4,660
200PB01 $197
200PB05 110v Engine Block Heater For Canopy (Standard on Cab builds) $117
200PB18 $267
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
Headlights
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
LOADER BUCKETS
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
EFFECTIVE:
JANUARY 1, 2018
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
Code Required For Excavator Quickhtes
Excavator Bucket Pivot Pin Set
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on Cutting
Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
3CX-14 SUPER BACKHOE LOADER 2EP1
Q-Fit Tool Carrier Quick Hitch
All prices and specifications subject to change without notice 48 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
200RA05 $933
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA59 $590
200RA68 $0
200RA77 $1,104LED Worklights
AutoPRE-HEAT
AEC Canopy Adjustments
Stabilizer Ram Guards - Centermount
Seatbelt (3in)
Seat Headrest
EFFECTIVE:
JANUARY 1,
2018
Front Fenders
Exterior Mirrors (2)
3CX-14 SUPER BACKHOE LOADER 2EP1
ADDITIONAL OPTIONS
750lb (340kg) Counterweight
All prices and specifications subject to change without notice 49 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
BASE MACHINE (E)
2EG8 $87,304
MODEL PACK: (E)
200AM06 3CX-14 Super 109hp CM 2WD Model Pack, Manual Controls $0
TIRES and TRANSMISSIONS: (E)
200B4BF $11,088
200B4BJ $12,932
200B7UF $9,246
200B7UJ $11,088
200B7VF $7,863
200B7VJ $9,516
200B9XJ $9,707
CAB/CANOPY: (E)
200CF09 $3,882
200CF11 $15,586
ENCLOSURE CONTROLS: (E)
200DE24 $0
200DE30 $0
BACKHOE PIPEWORK: (E)
200EB91 $0
200EB92 $2,975
200EB93 $5,307
200EB94 $11,588
200EB95 $11,588
LOADER PIPEWORK: (E)
200FD83 $0
200FD85 $1,051
200FD93 $1,051
TERRITORY PACKS (E)
200GA29 $0
200GA36 $0
200GA43 $0
200GA50 $0
200GA57 $0
French Territory Pack
French Territory Pack For Use with Thumb
Spanish Territory Pack
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Cab, LIVELINK
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
3CX-14 SUPER, 4WD, 2WS, 109hp T4F, 14ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator,
400lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery
Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle).
Michelin XMCL 340/80-18 & 440/80-28 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
3CX-14 SUPER BACKHOE LOADER 2EG8
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
EFFECTIVE:
JANUARY 1, 2018
English Territory Pack
English Territory Pack For Use with Thumb
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset and Detent for Bi-Directional Circuit.
Hammer/Bi-Directional Pipework
Hydraulic Thumb (For Quick Hitch Use)
Hydraulic Thumb (Not For Quick Hitch Use)
5/8 Loader Pipework, Return To Dig (RTD) & Auto SRS, 3 Spool Float, Reset and Detent
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
Canopy, Vinyl Suspension Seat
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
No Auxiliary Pipework
Hammer Pipework
Canopy, LIVELINK
All prices and specifications subject to change without notice 50 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
OPTIONS: Back to Index
200HA50 $2,142
200HA87 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA31 $4,660
200PB01 $197
200PB05 110v Engine Block Heater For Canopy (Standard on Cab builds) $117
200PB18 $267Headlights
9M Hose Reel with Hand Held Tool Circuit
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
HAND HELD TOOL CIRCUITS
BACKHOE BUCKET OPTIONS
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Excavator Bucket Pivot Pin Set
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on
Cutting Edge
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
EFFECTIVE:
JANUARY 1, 20183CX-14 SUPER BACKHOE LOADER 2EG8
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Q-Fit Tool Carrier Quick Hitch
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Code Required For Excavator Quickhtes
LOADER BUCKETS
All prices and specifications subject to change without notice 51 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
200RA05 $933
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA59 $590
200RA77 $1,104LED Worklights
Stabilizer Ram Guards - Centermount
Seatbelt (3in)
750lb (340kg) Counterweight
AutoPRE-HEAT
Exterior Mirrors (2)
EFFECTIVE:
JANUARY 1,
2018
3CX-14 SUPER BACKHOE LOADER 2EG8
ADDITIONAL OPTIONS
Seat Headrest
Front Fenders
All prices and specifications subject to change without notice 52 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EL2 $89,879
200AM13 $0
200B4BF $11,088
200B4BJ $12,932
200B7UF $9,246
200B7UJ $11,088
200B7VE $6,942
200B7VF $7,863
200B7VJ $9,516
200CF20 $3,882
200CF22 $15,586
200DE42 $0
200DE48 $0
200EJ46 $0
200EJ47 $2,975
200EJ48 $5,307
200EJ49 $11,588
200EJ50 $11,588
200FD98 $0
200FD99 $1,051
200FE04 $1,051
200GA29 $0
200GA36 $0
200GA43 $0
200GA50 $0
200GA57 $0
Canopy, LIVELINK
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
Cab, LIVELINK
ENCLOSURE CONTROLS: (E)
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Spanish Territory Pack
Hammer Pipework
Hammer/Bi-Directional Pipework
Hydraulic Thumb (For Quick Hitch Use)
LOADER PIPEWORK: (E)
English Territory Pack
TERRITORY PACKS (E)
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
Hydraulic Thumb (Not For Quick Hitch Use)
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool Float & Reset
English Territory Pack For Use with Thumb
French Territory Pack
French Territory Pack For Use with Thumb
EFFECTIVE:
JANUARY 1, 2018
Canopy, Vinyl Suspension Seat
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
3CX-14 SUPER BACKHOE LOADER 2EL2
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD, 4WD/2WS
CAB/CANOPY: (E)
BASE MACHINE (E)
MODEL PACK: (E)
3CX-14 Super 109hp CM Model Pack, Easy Controls
TIRES and TRANSMISSIONS: (E)
3CX-14 SUPER, 4WD, 2WS, 109hp T4F, 14ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator,
400lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery
Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and Telescopic Steering Wheel.
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Michelin XMCL 340/80-18 & 440/80-28 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
All prices and specifications subject to change without notice 53 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
OPTIONS: Back to Index
200HA50 $2,142
200HA90 $4,435
200HA91 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA27 $4,660
200NA29 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Excavator Bucket Pivot Pin Set
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
Headlights
9M Hose Reel with Hand Held Tool Circuit
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
VEHICLE ELECTRICAL OPTIONS
HAND HELD TOOL CIRCUITS
Rotating Amber Beacon
110v Engine Block Heater For Canopy (Standard on Cab builds)
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
Code Required For Excavator Quickhtes
LOADER BUCKETS
LOADER BUCKET OPTIONS
EFFECTIVE:
JANUARY 1, 2018
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on Cutting
Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
3CX-14 SUPER BACKHOE LOADER 2EL2
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Q-Fit Tool Carrier Quick Hitch
All prices and specifications subject to change without notice 54 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
200RA05 $933
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA59 $590
200RA77 $1,104LED Worklights
Stabilizer Ram Guards - Centermount
Seatbelt (3in)
750lb (340kg) Counterweight
AutoPRE-HEAT
Exterior Mirrors (2)
EFFECTIVE:
JANUARY 1,
2018
3CX-14 SUPER BACKHOE LOADER 2EL2
ADDITIONAL OPTIONS
Seat Headrest
Front Fenders
All prices and specifications subject to change without notice 55 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
Back to Index
2EP9 $92,454
200AM25 $0
200B6RF $11,088
200B6RJ $12,932
200B9YF $9,246
200B9YJ $11,088
200B9ZF $7,863
200B9ZJ $9,707
200CF34 $3,882
200CF36 $15,586
200DE60 $0
200DE66 $0
200EQ76 $0
200EQ77 $2,975
200EQ78 $5,307
200EQ79 $11,588
200EQ80 $11,588
200EY19 $5,307
200EY20 $11,588
200EY21 $11,588
200FE07 $0
200FE08 $1,051
200FE09 $1,051
200FF77 $1,051
200GA29 $0
200GA36 $0
200GA43 $0
200GA50 $0
200GA57 $0
English Territory Pack For Use with Thumb
French Territory Pack
French Territory Pack For Use with Thumb
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Cab, LIVELINK
Hydraulic Thumb (Not For Quick Hitch Use) for Cab
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
ENCLOSURE CONTROLS: (E)
Hammer Pipework
Hydraulic Thumb (For Quick Hitch Use) for Cab
Hammer/Bi-Directional Pipework, for Canopy
Hydraulic Thumb (Not For Quick Hitch Use) for Canopy
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
3CX-14 SUPER BACKHOE LOADER 2EP9
3CX-14 SUPER, 4WD, 2WS, 109hp T4F, 14ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator,
400lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery
Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and Telescopic Steering Wheel.
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Michelin XMCL 340/80-18 & 440/80-28 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES
BASE MACHINE (E)
MODEL PACK: (E)
3CX-14 Super 109hp CM Model Pack, Advanced Easy Controls
TIRES and TRANSMISSIONS: (E)
EFFECTIVE:
JANUARY 1, 2018
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool Float & Reset
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool Float & Reset for Hammer Circuit.
TERRITORY PACKS (E)
Spanish Territory Pack
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
LOADER PIPEWORK: (E)
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
English Territory Pack
Cab with A/C, Heated Air Suspension Seat. Includes 110v Engine Block Heater.
Hydraulic Thumb (For Quick Hitch Use) for Canopy
Hammer/Bi-Directional Pipework, for Cab
CAB/CANOPY: (E)
Canopy, Vinyl Suspension Seat
Canopy, LIVELINK
All prices and specifications subject to change without notice 56 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
OPTIONS: Back to Index
200HA50 $2,142
200HA92 $4,435
200HA93 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA25 $4,660
200NA26 $4,660
200PB01 $197
200PB05 110v Engine Block Heater For Canopy (Standard on Cab builds) $117
200PB18 $267
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
Headlights
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
LOADER BUCKET OPTIONS
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
Excavator Bucket Pivot Pin Set
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
EFFECTIVE:
JANUARY 1, 2018
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on Cutting
Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
3CX-14 SUPER BACKHOE LOADER 2EP9
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Q-Fit Tool Carrier Quick Hitch
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Mechanical Quick Hitch with 1 Ton Shackle
Code Required For Excavator Quickhtes
LOADER BUCKETS
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
All prices and specifications subject to change without notice 57 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
ADDITIONAL OPTIONS
200RA05 $933
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA59 $590
200RA68 $0
200RA77 $1,104
AEC Canopy Adjustments
LED Worklights
Front Fenders
Stabilizer Ram Guards - Centermount
EFFECTIVE:
JANUARY 1,
2018
Seatbelt (3in)
Exterior Mirrors (2)
Seat Headrest
3CX-14 SUPER BACKHOE LOADER 2EP9
750lb (340kg) Counterweight
AutoPRE-HEAT
All prices and specifications subject to change without notice 58 Backhoe Loader USD Price Pages
2018
JCB BACKHOE LOADER
3CX-15 SUPERCENTERMOUNT
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice 59 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
EFFECTIVE:
JANUARY 1, 2018
STANDARD EQUIPMENT Back to Index
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks with the exception of the Diesel Exhaust Fluid (DEF) tank
operate with ignition key. Front and rear horn buttons. Automatic backup alarm.
ENGINE 109HP gross, turbocharged, water-cooled,4 cyl, direct injection diesel. T4F compliant engine with
Selective Catalytic Reduction (SCR) and 5 gallon DEF tank. Hand and foot throttle. SelectiveFull flow
pressure engineoil lubrication with spin-on filter cartridge. Air to fluid coolers. Separately serviceable
radiator, hydraulic and transmission oil coolers. Two stage fuel filtering system utilizing a water/sediment
separator and spin-on type filter element. Dual element air filter, dry type with cleanable outer element,
replaceable inner element and under hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear selection
with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake. Transmission shifts
to neutral when park brake is activated. 4 wheel braking in 2 wheel drive activated by switch.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle - 26' 5".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Extradig dipper - 16' 3" - 20' 1". EasyControl backhoe controls.
Fabricated stabilizer legs with anti-drift valves. 11,000 lb. lifting hook as standard.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 32".
Auto Smooth Ride System (AutoSRS). Front bumper protection fitted as standard.
3CX-15 SUPER BACKHOE
LOADERF.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice 60 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
EFFECTIVE:
JANUARY 1, 2018
STANDARD EQUIPMENT (CONT.) Back to Index
ELECTRICAL SYSTEM 12 volt system with 150 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs. AutoTHROTLE returns engine speed to pre-set hand throttle
position when work is resumed. AutoDRIVE provies cruise control-type characteristics during roading.
Advanced Easy Controls and Easy Controls only: AutoSTABILIZERS and AutoBOOMLOCK.
HYDRAULIC SYSTEM Open center system, variable displacement piston pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts. Auto Idle reduces engine speed
when no hydraulic functions are requested.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 40 gallon fuel tank. 20 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval.
1000 hour DEF filter interval. 1000 hour transmission oil and 500 hour transmission filter service
interval. 2000 hour hydraulic oil and 500 hour hydraulic filter service interval. External Toolbox.
AutoCHECK automatically performs daily under hood maintenance checks on 'key on'
TELEMATICS JCB Livelink telematics. Monitored and managed remotely via a PC or Smartphone. Two year
subscription. Real time reporting of machine hours, routine maintenance alerts, location,
critical health alerts, fuel level/consumption and work cycle information. Ability to set
machine geo-fences and curfews for improved security.
3CX-15 SUPER BACKHOE LOADER F.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice 61 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
YELLOW SERIES: Back to Index
US LIST
3CX-15 SUPER CANOPY PRICE
2EH5 $82,154
200AM07 $0
200B9WF $9,246
200CF09 $3,882
200DE24 $0
200EC14 $5,307
200FD93 $1,051
200GA30 $0
200JA82 $2,769
200MA50 $1,298
200PB18 $267
200RA20 $184
200RA37 Seatbelt (3in) $88
TOTAL $106,246
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Headlights
Exterior Mirrors (2)
EFFECTIVE:
JANUARY 1,
2018
3CX-15 SUPER BACKHOE LOADER
3CX-15 SUPER, 4WD, 2WS, 109hp T4F, 15ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator, 750lbs
Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery Isolator, Toolbox
and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle).
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
3CX-15 Super 109hp CM 4WD Model Pack, Manual Controls
Canopy, Vinyl Suspension Seat
Canopy, LIVELINK
Hammer/Bi-Directional Pipework
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset and Detent for Bi-Directional Circuit.
English Territory Pack
All prices and specifications subject to change without notice 62 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
1 - NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EH5 $82,154
200AM07 $0
200B6QF $11,088
200B6QJ $12,932
200B7VJ $9,516
200B9WF $9,246
200B9WJ $11,088
200B9XF $7,863
200B9XJ $9,707
200CF09 $3,882
200CF11 $15,586
200DE24 $0
200DE30 $0
200EC12 $0
200EC13 $2,975
200EC14 $5,307
200EC15 $11,588
200EC16 $11,588
200FD83 $0
200FD85 $1,051
200FD93 $1,051
200GA30 $0
200GA44 $0
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
CAB/CANOPY: (E)
Canopy, Vinyl Suspension Seat
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
TERRITORY PACKS (E)
ENCLOSURE CONTROLS: (E)
Canopy, LIVELINK
English Territory Pack
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset and Detent for Bi-Directional Circuit.
LOADER PIPEWORK: (E)
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
Hammer/Bi-Directional Pipework
Hammer Pipework
Cab, LIVELINK
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
French Territory Pack
EFFECTIVE:
JANUARY 1,
2018
5/8 Loader Pipework, Return To Dig (RTD) & Auto SRS, 3 Spool Float, Reset and Detent
Hydraulic Thumb (For Quick Hitch Use)
Hydraulic Thumb (Not For Quick Hitch Use)
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
3CX-15 SUPER BACKHOE LOADER 2EH5
3CX-15 SUPER, 4WD, 2WS, 109hp T4F, 15ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator,
750lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery
Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle).
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Michelin XMCL 340/80-18 & 440/80-28 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
BASE MACHINE (E)
MODEL PACK: (E)
3CX-15 Super 109hp CM 4WD Model Pack, Manual Controls
TIRES and TRANSMISSIONS: (E)
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
All prices and specifications subject to change without notice 63 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
2 - OPTIONS: Back to Index
200HA50 $2,142
200HA87 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200LA12 $0
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
$0
200NA31 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
3CX-15 SUPER BACKHOE LOADER 2EH5
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Q-Fit Tool Carrier Quick Hitch
Code Required For Excavator Quickhtes
LOADER BUCKETS
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
15ft/109hp Price Equalization
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on Cutting
Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
110v Engine Block Heater For Canopy (Standard on Cab builds)
EFFECTIVE:
JANUARY 1,
2018
Headlights
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
HAND HELD TOOL CIRCUITS
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
9M Hose Reel with Hand Held Tool Circuit
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
DISCOUNTS
BACKHOE BUCKET OPTIONS
Excavator Bucket Pivot Pin Set
All prices and specifications subject to change without notice 64 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
2 - OPTIONS: Continued Back to Index
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA59 $590
200RA77 $1,104
Seat Headrest
Seatbelt (3in)
LED Worklights
Front Fenders
Stabilizer Ram Guards - Centermount
EFFECTIVE:
JANUARY 1,
2018
3CX-15 SUPER BACKHOE LOADER 2EH5
ADDITIONAL OPTIONS
AutoPRE-HEAT
Exterior Mirrors (2)
All prices and specifications subject to change without notice 65 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
YELLOW SERIES: Back to Index
US LIST
3CX-15 SUPER CAB PRICE
2EL9 $84,729
200AM14 $0
200B9WF $9,246
200CF22 $15,586
200DE48 $0
200EJ68 $5,307
200FE04 $1,051
200GA30 $0
200JA82 $2,769
200LA12 $0
200MA50 $1,298
200PB18 $267
200RA20 $184
200RA37 $88
TOTAL $120,525
Exterior Mirrors (2)
3CX-15 SUPER, 4WD, 2WS, 109hp T4F, 15ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator,
750lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery
Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and Telescopic Steering Wheel.
3CX-15 Super 109hp CM Model Pack, Easy Controls
English Territory Pack
Seatbelt (3in)
EFFECTIVE:
JANUARY 1,
2018
3CX-15 SUPER BACKHOE LOADER 2EL9
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Headlights
15ft/109hp Price Equalization
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
Cab, LIVELINK
Hammer/Bi-Directional Pipework, 15' Extradig Dipper
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
All prices and specifications subject to change without notice 66 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
2 - NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EL9 $84,729
200AM14 $0
200B6QF $11,088
200B6QJ $12,932
200B7VJ $9,516
200B9WF $9,246
200B9WJ $11,088
200B9XF $7,863
200B9XJ $9,707
200CF20 $3,882
200CF22 $15,586
200DE42 $0
200DE48 $0
200EJ66 $0
200EJ67 $2,975
200EJ68 $5,307
200EJ69 $11,588
200EJ70 $11,588
200FD98 $0
200FD99 $1,051
200FE04 $1,051
200GA30 $0
200GA44 $0
TERRITORY PACKS (E)
English Territory Pack
Hydraulic Thumb (For Quick Hitch Use), 15' Extradig Dipper
LOADER PIPEWORK: (E)
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool Float & Reset
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework, 15' Extradig Dipper
Hammer Pipework, 15' Extradig Dipper
Hammer/Bi-Directional Pipework, 15' Extradig Dipper
Hydraulic Thumb (Not For Quick Hitch Use), 15' Extradig Dipper
Canopy, Vinyl Suspension Seat
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
ENCLOSURE CONTROLS: (E)
Canopy, LIVELINK
Cab, LIVELINK
French Territory Pack
EFFECTIVE:
JANUARY 1,
2018
3CX-15 SUPER BACKHOE LOADER 2EL9
BASE MACHINE (E)
3CX-15 SUPER, 4WD, 2WS, 109hp T4F, 15ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator,
750lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery
Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and Telescopic Steering Wheel.
MODEL PACK: (E)
3CX-15 Super 109hp CM Model Pack, Easy Controls
TIRES and TRANSMISSIONS: (E)
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Michelin XMCL 340/80-18 & 440/80-28 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
CAB/CANOPY: (E)
All prices and specifications subject to change without notice 67 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
3 - OPTIONS: Back to Index
200HA50 $2,142
200HA90 $4,435
200HA91 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200LA12 $0
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200MA53 $2,086
200NA27 $4,660
200NA29 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on Cutting
Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
LOADER BUCKETS
Q-Fit Tool Carrier Quick Hitch
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Code Required For Excavator Quickhtes
3CX-15 SUPER BACKHOE LOADER 2EL9
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
DISCOUNTS
Excavator Bucket Pivot Pin Set
15ft/109hp Price Equalization
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
110v Engine Block Heater For Canopy (Standard on Cab builds)
EFFECTIVE:
JANUARY 1,
2018
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
Headlights
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
Backhoe Bucket - 36in (900mm) Heavy Duty 6 Teeth
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
BACKHOE BUCKET OPTIONS
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
All prices and specifications subject to change without notice 68 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
3 - OPTIONS: Continued Back to Index
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA59 $590
200RA77 $1,104
Seat Headrest
Seatbelt (3in)
Front Fenders
Stabilizer Ram Guards - Centermount
LED Worklights
EFFECTIVE:
JANUARY 1,
2018
3CX-15 SUPER BACKHOE LOADER 2EL9
ADDITIONAL OPTIONS
AutoPRE-HEAT
Exterior Mirrors (2)
All prices and specifications subject to change without notice 69 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
2 - NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EQ7 $87,304
200AM26 $0
200B4DK $11,088
200B4DL $12,932
200B7WK $9,246
200B7WL $11,088
200B7XK $7,863
200B7XL $9,707
200CF34 $3,882
200CF36 $15,586
200DE60 $0
200DE66 $0
200EQ96 $0
200EQ97 $2,975
200EQ98 $5,307
200EQ99 $11,588
200ER01 $11,588
200EY31 $5,307
200EY32 $11,588
200EY33 $11,588
200FE07 $0
200FE08 $1,051
200FE09 $1,051
200FF77 $1,051
200GA30 $0
200GA44 $0
Hammer/Bi-Directional Pipework,
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool Float & Reset for Hammer Circuit.
TERRITORY PACKS (E)
English Territory Pack
Hydraulic Thumb (Not For Quick Hitch Use)
Hydraulic Thumb (For Quick Hitch Use)
LOADER PIPEWORK: (E)
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool Float & Reset
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
No Auxiliary Pipework, no Boom End Dampening, Heavy Lift
Hammer Pipework
Hammer/Bi-Directional Pipework
Hydraulic Thumb (Not For Quick Hitch Use)
Hydraulic Thumb (For Quick Hitch Use)
Cab with A/C, Heated Air Suspension Seat. Includes 110v Engine Block Heater.
ENCLOSURE CONTROLS: (E)
Canopy, LIVELINK
Cab, LIVELINK
BACKHOE PIPEWORK: (E)
French Territory Pack
EFFECTIVE:
JANUARY 1,
2018
3CX-15 SUPER BACKHOE LOADER 2EQ7
BASE MACHINE (E)
3CX-15 SUPER, 4WD, 2WS, 109hp T4F, 15ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator, 750lbs
Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery Isolator,
Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and Telescopic Steering Wheel.
MODEL PACK: (E)
3CX-15 Super 109hp CM Model Pack, Advanced Easy Controls
TIRES and TRANSMISSIONS: (E)
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Michelin XMCL 340/80-18 & 440/80-28 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
CAB/CANOPY: (E)
Canopy, Vinyl Suspension Seat
All prices and specifications subject to change without notice 70 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
3 - OPTIONS: Back to Index
200HA50 $2,142
200HA92 $4,435
200HA93 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200LA12 $0
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200MA53 $2,086
200NA25 $4,660
200NA26 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on
Cutting Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
LOADER BUCKETS
Q-Fit Tool Carrier Quick Hitch
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Code Required For Excavator Quickhtes
3CX-15 SUPER BACKHOE LOADER 2EQ7
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
DISCOUNTS
Excavator Bucket Pivot Pin Set
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
110v Engine Block Heater For Canopy (Standard on Cab builds)
EFFECTIVE:
JANUARY 1,
2018
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
Headlights
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
Backhoe Bucket - 36in (900mm) Heavy Duty 6 Teeth
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
BACKHOE BUCKET OPTIONS
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
15ft/109hp Price Equalization
All prices and specifications subject to change without notice 71 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
3 - OPTIONS: Continued Back to Index
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA59 $590
200RA77 $1,104
Stabilizer Ram Guards - Centermount
LED Worklights
Seat Headrest
Seatbelt (3in)
Front Fenders
EFFECTIVE:
JANUARY 1,
2018
3CX-15 SUPER BACKHOE LOADER 2EQ7
ADDITIONAL OPTIONS
AutoPRE-HEAT
Exterior Mirrors (2)
All prices and specifications subject to change without notice 72 Backhoe Loader USD Price Pages
2018
JCB BACKHOE LOADER
4CX-14 SUPERCENTERMOUNT
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice 73 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
EFFECTIVE:
JANUARY 1, 2018
STANDARD EQUIPMENT Back to Index
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks with the exception of the Diesel Exhaust Fluid (DEF) tank
operate with ignition key. Front and rear horn buttons. Automatic backup alarm.
ENGINE 109HP gross, turbocharged, water-cooled, 4 cyl, direct injection diesel. T4F compliant engine with
Selective Catalytic Reduction (SCR) and 5 gallon DEF tank. Hand and foot throttle. SelectiveFull flow
pressure engineoil lubrication with spin-on filter cartridge. Air to fluid coolers. Separately serviceable
radiator, hydraulic and transmission oil coolers. Two stage fuel filtering system utilizing a water/sediment
separator and spin-on type filter element. Dual element air filter, dry type with cleanable outer element,
replaceable inner element and under hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear selection
with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake. Transmission shifts
to neutral when park brake is activated. 4 wheel braking in 2 wheel drive activated by switch.
STEERING 4 Wheel Steer. Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock).
Unbraked turning circle - 26' 5". Three steer modes, 2-wheel steer, 4-wheel steer and crab steer.
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Extradig dipper - 14' 7" - 18' 6". EasyControl backhoe controls.
Fabricated stabilizer legs with anti-drift valves. 11,000 lb. lifting hook as standard.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 32".
Auto Smooth Ride System (AutoSRS). Front bumper protection fitted as standard.
Heavy Lift loader arms standard
4CX-14 SUPER BACKHOE LOADER F.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice 74 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 1, 2018
STANDARD EQUIPMENT (CONT.) Back to Index
ELECTRICAL SYSTEM 12 volt system with 150 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs. AutoTHROTLE returns engine speed to pre-set hand throttle
position when work is resumed. AutoDRIVE provies cruise control-type characteristics during roading.
Advanced Easy Controls and Easy Controls only: AutoSTABILIZERS and AutoBOOMLOCK.
HYDRAULIC SYSTEM Open center system, variable displacement piston pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts. Auto Idle reduces engine speed
when no hydraulic functions are requested.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 40 gallon fuel tank. 20 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval.
1000 hour DEF filter interval. 1000 hour transmission oil and 500 hour transmission filter service
interval. 2000 hour hydraulic oil and 500 hour hydraulic filter service interval. External Toolbox.
AutoCHECK automatically performs daily under hood maintenance checks on 'key on'
TELEMATICS JCB Livelink telematics. Monitored and managed remotely via a PC or Smartphone. Two year
subscription. Real time reporting of machine hours, routine maintenance alerts, location,
critical health alerts, fuel level/consumption and work cycle information. Ability to set
machine geo-fences and curfews for improved security.
4CX-14 SUPER BACKHOE LOADER
All prices and specifications subject to change without notice 75 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
1 - NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EJ3 $105,844
200AM08 $0
200B2NY $7,465
200B2NZ $9,309
200B2QY $9,770
200B2QZ $11,613
200CF12 $3,882
200CF14 $15,586
200DE24 $0
200DE30 $0
200EB91 $0
200EB92 $2,975
200EB93 $5,307
200EB94 $11,588
200EB95 $11,588
200FD89 $0
200FD91 $1,051
200FD97 $1,051
200GA31 $0
200GA40 $0
200GA45 $0
CAB/CANOPY: (E)
Canopy, Vinyl Suspension Seat
TERRITORY PACKS (E)
English Territory Pack
Cab, LIVELINK
Hydraulic Thumb (Not For Quick Hitch Use)
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset and Detent.
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset and Detent for Bi-Directional Circuit.
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
Hammer Pipework
Hammer/Bi-Directional Pipework
Hydraulic Thumb (For Quick Hitch Use)
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
LOADER PIPEWORK: (E)
English Territory Pack For Use with Thumb
French Territory Pack
EFFECTIVE:
JANUARY 1,
2018
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
ENCLOSURE CONTROLS: (E)
Canopy, LIVELINK
4CX-14 SUPER BACKHOE LOADER 2EJ3
4CX-14 SUPER, 4WD, 4WS, 109hp T4F, 14ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator,
100lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery
Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle).
Michelin Power CL 440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
BASE MACHINE (E)
MODEL PACK: (E)
4CX-14 Super 109hp CM Model Pack, Manual Controls
TIRES and TRANSMISSIONS: (E)
Michelin Power CL 440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
All prices and specifications subject to change without notice 76 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
2 - OPTIONS: Back to Index
200HA50 $2,142
200HA87 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200MA53 $2,086
200NA63 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
Rotating Amber Beacon
Headlights
Backhoe Bucket - 36in (900mm) Heavy Duty 6 Teeth
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
110v Engine Block Heater For Canopy (Standard on Cab builds)
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
VEHICLE ELECTRICAL OPTIONS
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
Q-Fit Mounted Fork Frame and 48in Forks.
LOADER BUCKET OPTIONS
BACKHOE BUCKET OPTIONS
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Excavator Bucket Pivot Pin Set
EFFECTIVE:
JANUARY 1,
2018
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on Cutting
Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
4CX-14 SUPER BACKHOE LOADER 2EJ3
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Code Required For Excavator Quickhtes
LOADER BUCKETS
Q-Fit Tool Carrier Quick Hitch
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
All prices and specifications subject to change without notice 77 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
2 - OPTIONS: Continued Back to Index
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA59 $590
200RA77 $1,104
Seat Headrest
Seatbelt (3in)
Front Fenders
Stabilizer Ram Guards - Centermount
LED Worklights
EFFECTIVE:
JANUARY 1,
2018
4CX-14 SUPER BACKHOE LOADER 2EJ3
ADDITIONAL OPTIONS
AutoPRE-HEAT
Exterior Mirrors (2)
All prices and specifications subject to change without notice 78 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
2 - NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EN2 $108,419
200AM16 $0
200B2NY $7,465
200B2NZ $9,309
200B2QY $9,770
200B2QZ $11,613
200CF23 $3,882
200CF25 $15,586
200DE42 $0
200DE48 $0
200EJ46 $0
200EJ47 $2,975
200EJ48 $5,307
200EJ49 $11,588
200EJ50 $11,588
200FE02 $0
200FE03 $1,051
200FE06 $1,051
200GA31 $0
200GA40 $0
200GA45 $0
TIRES and TRANSMISSIONS: (E)
English Territory Pack For Use with Thumb
French Territory Pack
Cab, LIVELINK
Hydraulic Thumb (For Quick Hitch Use)
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
TERRITORY PACKS (E)
English Territory Pack
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
Hammer Pipework
Hammer/Bi-Directional Pipework
Hydraulic Thumb (Not For Quick Hitch Use)
5/8 Loader Pipework. Includes Return To Dig (RTD), Auto SRS, 3 Spool Float and Reset.
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
EFFECTIVE:
JANUARY 1,
2018
LOADER PIPEWORK: (E)
Michelin Power CL 440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
CAB/CANOPY: (E)
Canopy, Vinyl Suspension Seat
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
ENCLOSURE CONTROLS: (E)
Canopy, LIVELINK
4CX-14 SUPER BACKHOE LOADER 2EN2
4CX-14 SUPER, 4WD, 4WS, 109hp T4F, 14ft Centermount Backhoe with ExtraDig Extending Dipper. 150A
Alternator, 100lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear
Worklights, Battery Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and
Telescopic Steering Wheel.
Michelin Power CL 440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
BASE MACHINE (E)
MODEL PACK: (E)
4CX-14 Super CM Model Pack, Easy Controls
All prices and specifications subject to change without notice 79 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
3 - OPTIONS: Back to Index
200HA50 $2,142
200HA90 $4,435
200HA91 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200MA53 $2,086
200NA59 $4,660
200NA61 $4,660
200PB01 $197
200PB05 $117
200PB18 $267Headlights
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
110v Engine Block Heater For Canopy (Standard on Cab builds)
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
Backhoe Bucket - 36in (900mm) Heavy Duty 6 Teeth
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Excavator Bucket Pivot Pin Set
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
LOADER BUCKET OPTIONS
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on Cutting
Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
Code Required For Excavator Quickhtes
LOADER BUCKETS
Q-Fit Tool Carrier Quick Hitch
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
EFFECTIVE:
JANUARY 1,
2018
4CX-14 SUPER BACKHOE LOADER 2EN2
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
All prices and specifications subject to change without notice 80 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
3 - OPTIONS: Continued Back to Index
200RA04 $631
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA56 $455
200RA59 $590
200RA77 $1,104
Seatbelt (3in)
LED Worklights
Flipover Stabilizer Feet - Centermount
Stabilizer Ram Guards - Centermount
Exterior Mirrors (2)
Seat Headrest
EFFECTIVE:
JANUARY 1,
2018
4CX-14 SUPER BACKHOE LOADER 2EN2
ADDITIONAL OPTIONS
562lb (255kg) Counterweight
AutoPRE-HEAT
All prices and specifications subject to change without notice 81 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EQ3 $110,994
200AM28 $0
200B2KY $9,309
200B2KZ $7,465
200B2ZY $11,613
200B2ZZ $9,770
200B3JZ $13,911
200CF37 $3,882
200CF39 $15,586
200DE60 $0
200DE66 $0
200EQ76 $0
200EQ77 $2,975
200EQ78 $5,307
200EQ80 $11,588
200EY19 $5,307
200EY20 $11,588
200EY21 $11,588
200FE10 $0
200FE11 $1,051
200FE12 $1,051
200FF78 $1,051
200GA31 $0
200GA40 $0
200GA45 $0
English Territory Pack For Use with Thumb
TIRES and TRANSMISSIONS: (E)
French Territory Pack
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool Float & Reset
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool Float & Reset for Hammer Circuit.
Hammer Pipework
Hammer/Bi-Directional Pipework, for Cab
Hydraulic Thumb (For Quick Hitch Use) for Cab
Hydraulic Thumb (For Quick Hitch Use) for Canopy
Michelin Power CL 440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
English Territory Pack
EFFECTIVE:
JANUARY 1,
2018
LOADER PIPEWORK: (E)
Michelin XMCL440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin BIBLOAD 440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
CAB/CANOPY: (E)
Canopy, Vinyl Suspension Seat
Canopy, LIVELINK
Cab, LIVELINK
ENCLOSURE CONTROLS: (E)
Cab with A/C, Heated Air Suspension Seat. Includes 110v Engine Block Heater.
4CX-14 SUPER BACKHOE LOADER 2EQ3
4CX-14 SUPER, 4WD, 4WS, 109hp T4F, 14ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator,
100lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights,
Battery Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and Telescopic Steering
Wheel.
Michelin Power CL 440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
Hammer/Bi-Directional Pipework, for Canopy
Hydraulic Thumb (Not For Quick Hitch Use) for Canopy
BASE MACHINE (E)
MODEL PACK: (E)
4CX-14 Super 109hp CM Model Pack, Advanced Easy Controls
5/8 Loader Pipework Return To Dig (RTD) Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
TERRITORY PACKS (E)
All prices and specifications subject to change without notice 82 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
OPTIONS: Back to Index
200HA50 $2,142
200HA92 $4,435
200HA93 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA57 $4,660
200NA58 $4,660
200PB01 $197
200PB05 110v Engine Block Heater For Canopy (Standard on Cab builds) $117
200PB18 $267
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
Headlights
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
EFFECTIVE:
JANUARY 1,
2018
Excavator Bucket Pivot Pin Set
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on Cutting Edge
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Code Required For Excavator Quickhtes
LOADER BUCKETS
Q-Fit Tool Carrier Quick Hitch
4CX-14 SUPER BACKHOE LOADER 2EQ3
All prices and specifications subject to change without notice 83 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
200RA04 $631
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA56 $455
200RA59 $590
200RA68 $0
200RA77 $1,104
Seatbelt (3in)
LED Worklights
Stabilizer Ram Guards - Centermount
AEC Canopy Adjustments
Exterior Mirrors (2)
Seat Headrest
Flipover Stabilizer Feet - Centermount
EFFECTIVE:
JANUARY 1,
2018
4CX-14 SUPER BACKHOE LOADER 2EQ3
562lb (255kg) Counterweight
AutoPRE-HEAT
ADDITIONAL OPTIONS
All prices and specifications subject to change without notice 84 Backhoe Loader USD Price Pages
2018
JCB BACKHOE LOADER
4CX-15 SUPERCENTERMOUNT
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice 85 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
EFFECTIVE:
JANUARY 1, 2018
STANDARD EQUIPMENT Back to Index
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks with the exception of the Diesel Exhaust Fluid (DEF) tank
operate with ignition key. Front and rear horn buttons. Automatic backup alarm.
ENGINE 109HP gross, turbocharged, water-cooled, 4 cyl, direct injection diesel. T4F compliant engine with
Selective Catalytic Reduction (SCR) and 5 gallon DEF tank. Hand and foot throttle. SelectiveFull flow
pressure engineoil lubrication with spin-on filter cartridge. Air to fluid coolers. Separately serviceable
radiator, hydraulic and transmission oil coolers. Two stage fuel filtering system utilizing a water/sediment
separator and spin-on type filter element. Dual element air filter, dry type with cleanable outer element,
replaceable inner element and under hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear selection
with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake. Transmission shifts
to neutral when park brake is activated. 4 wheel braking in 2 wheel drive activated by switch.
STEERING 4 Wheel Steer. Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock).
Unbraked turning circle - 26' 5". Three steer modes, 2-wheel steer, 4-wheel steer and crab steer.
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.
SAE maximum dig depth: Extradig dipper - 16' 3" - 20' 1". EasyControl backhoe controls.
Fabricated stabilizer legs with anti-drift valves. 11,000 lb. lifting hook as standard.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 32".
Auto Smooth Ride System (AutoSRS). Front bumper protection fitted as standard.
Heavy Lift loader arms standard
4CX-15 SUPER BACKHOE LOADER F.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice 86 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
EFFECTIVE:
JANUARY 1, 2018
STANDARD EQUIPMENT (CONT.) Back to Index
ELECTRICAL SYSTEM 12 volt system with 150 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs. AutoTHROTLE returns engine speed to pre-set hand throttle
position when work is resumed. AutoDRIVE provies cruise control-type characteristics during roading.
Advanced Easy Controls and Easy Controls only: AutoSTABILIZERS and AutoBOOMLOCK.
HYDRAULIC SYSTEM Open center system, variable displacement piston pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts. Auto Idle reduces engine speed
when no hydraulic functions are requested.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 40 gallon fuel tank. 20 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval.
1000 hour DEF filter interval. 1000 hour transmission oil and 500 hour transmission filter service
interval. 2000 hour hydraulic oil and 500 hour hydraulic filter service interval. External Toolbox.
AutoCHECK automatically performs daily under hood maintenance checks on 'key on'
TELEMATICS JCB Livelink telematics. Monitored and managed remotely via a PC or Smartphone. Two year
subscription. Real time reporting of machine hours, routine maintenance alerts, location,
critical health alerts, fuel level/consumption and work cycle information. Ability to set
machine geo-fences and curfews for improved security.
4CX-15 SUPER BACKHOE LOADER F.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice 87 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
1 - NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2EJ5 $113,569
200AM33 $0
200B2NY $7,465
200B2NZ $9,309
200B2QY $9,770
200B2QZ $11,613
200CF12 $3,882
200CF14 $15,586
200DE24 $0
200DE30 $0
200EC12 $0
200EC13 $2,975
200EC14 $5,307
200EC15 $11,588
200EC16 $11,588
200FD89 $0
200FD90 $1,051
200FD91 $1,051
200FD96 $1,051
200FD97 $1,051
200GA40 $0
200GA54 $0
200GA68 $0Spanish Territory Pack For Use with Thumb
5/8 Loader Pipework, Return To Dig (RTD) & Auto SRS, 3 Spool Float and Reset.
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset and Detent.
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
French Territory Pack For Use with Thumb
Hydraulic Thumb (Not For Quick Hitch Use)
ENCLOSURE CONTROLS: (E)
Michelin Power CL 440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
CAB/CANOPY: (E)
4CX-15 SUPER BACKHOE LOADER 2EJ5
4CX-15 SUPER, 4WD, 4WS, 109hp T4F, 15ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator,
750lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights,
Battery Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and Telescopic Steering
Wheel.
Michelin Power CL 440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
BASE MACHINE (E)
MODEL PACK: (E)
4CX-15 Super 109hp CM Model Pack, Manual Controls
TIRES and TRANSMISSIONS: (E)
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
EFFECTIVE:
JANUARY 1,
2018
TERRITORY PACKS (E)
English Territory Pack For Use with Thumb
Cab, LIVELINK
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset and Detent for Bi-Directional Circuit.
Hammer Pipework
Hammer/Bi-Directional Pipework
Hydraulic Thumb (For Quick Hitch Use)
Canopy, Vinyl Suspension Seat
Canopy, LIVELINK
LOADER PIPEWORK: (E)
All prices and specifications subject to change without notice 88 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
2 - OPTIONS: Back to Index
200HA87 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA63 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
4CX-15 SUPER BACKHOE LOADER 2EJ5
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
Code Required For Excavator Quickhtes
LOADER BUCKETS
Q-Fit Tool Carrier Quick Hitch
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on Cutting
Edge
EFFECTIVE:
JANUARY 1,
2018
Excavator Bucket Pivot Pin Set
Headlights
110v Engine Block Heater For Canopy (Standard on Cab builds)
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
All prices and specifications subject to change without notice 89 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
2 - OPTIONS: Continued Back to Index
ADDITIONAL OPTIONS
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA56 $455
200RA59 $590
200RA77 $1,104
EFFECTIVE:
JANUARY 1,
2018
LED Worklights
4CX-15 SUPER BACKHOE LOADER 2EJ5
AutoPRE-HEAT
Exterior Mirrors (2)
Seat Headrest
Seatbelt (3in)
Flipover Stabilizer Feet - Centermount
Stabilizer Ram Guards - Centermount
All prices and specifications subject to change without notice 90 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
YELLOW SERIES: Back to Index
US LIST
4CX-15 SUPER CAB PRICE
2EN3 $116,144
200AM17 $0
200B2NZ $9,309
200CF25 $15,586
200DE48 $0
200EJ68 $5,307
200FE06 $1,051
200GA40 $0
200JA87 $9,458
200MA50 $1,298
200PB18 $267
200RA20 $184
200RA37 $88
TOTAL $158,692
Seatbelt (3in)
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Headlights
Exterior Mirrors (2)
EFFECTIVE:
JANUARY 1,
2018
4CX-15 SUPER BACKHOE LOADER
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt
on Cutting Edge.
4CX-15 SUPER, 4WD, 4WS, 109hp T4F, 15ft Centermount Backhoe with ExtraDig Extending Dipper. 150A Alternator,
750lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery
Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and Telescopic Steering Wheel.
4CX-15 Super 109hp CM Model Pack, Easy Controls
Michelin Power CL 440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
Cab, LIVELINK
Hammer/Bi-Directional Pipework, 15' Extradig Dipper
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
English Territory Pack For Use with Thumb
All prices and specifications subject to change without notice 91 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
Back to Index
2EN3 $116,144
200AM17 $0
200B2NY $7,465
200B2NZ $9,309
200B2QY $9,770
200B2QZ $11,613
200CF23 $3,882
200CF25 $15,586
200DE42 $0
200DE48 $0
200EJ66 $0
200EJ67 $2,975
200EJ68 $5,307
200EJ69 $11,588
200EJ70 $11,588
200FE02 $0
200FE03 $1,051
200FE06 $1,051
200GA40 $0
200GA54 $0
200GA68 $0
French Territory Pack For Use with Thumb
Spanish Territory Pack For Use with Thumb
TIRES and TRANSMISSIONS: (E)
Cab, LIVELINK
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
TERRITORY PACKS (E)
English Territory Pack For Use with Thumb
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework, 15' Extradig Dipper
Hammer Pipework, 15' Extradig Dipper
Hammer/Bi-Directional Pipework, 15' Extradig Dipper
Hydraulic Thumb (Not For Quick Hitch Use), 15' Extradig Dipper
5/8 Loader Pipework. Includes Return To Dig (RTD), Auto SRS, 3 Spool Float and Reset.
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
Hydraulic Thumb (For Quick Hitch Use), 15' Extradig Dipper
LOADER PIPEWORK: (E)
EFFECTIVE:
JANUARY 1,
2018
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
ENCLOSURE CONTROLS: (E)
Canopy, LIVELINK
Michelin Power CL 440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
CAB/CANOPY: (E)
Canopy, Vinyl Suspension Seat
4CX-15 SUPER BACKHOE LOADER 2EN3
4CX-15 SUPER, 4WD, 4WS, 109hp T4F, 15ft Centermount Backhoe with ExtraDig Extending Dipper. 150A
Alternator, 750lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear
Worklights, Battery Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and
Telescopic Steering Wheel.
Michelin Power CL 440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
1 - NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES
BASE MACHINE (E)
MODEL PACK: (E)
4CX-15 Super 109hp CM Model Pack, Easy Controls
All prices and specifications subject to change without notice 92 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
2 - OPTIONS: Back to Index
200HA50 $2,142
200HA90 $4,435
200HA91 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA59 $4,660
200NA61 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
4CX-15 SUPER BACKHOE LOADER 2EN3
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
BACKHOE BUCKET OPTIONS
Code Required For Excavator Quickhtes
LOADER BUCKETS
Q-Fit Tool Carrier Quick Hitch
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on Cutting
Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
110v Engine Block Heater For Canopy (Standard on Cab builds)
EFFECTIVE:
JANUARY 1,
2018
Excavator Bucket Pivot Pin Set
Headlights
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
All prices and specifications subject to change without notice 93 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
2 - OPTIONS: Continued Back to Index
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA56 $455
200RA59 $590
200RA77 $1,104
Stabilizer Ram Guards - Centermount
LED Worklights
EFFECTIVE:
JANUARY 1,
2018
Flipover Stabilizer Feet - Centermount
Seat Headrest
Seatbelt (3in)
4CX-15 SUPER BACKHOE LOADER 2EN3
ADDITIONAL OPTIONS
AutoPRE-HEAT
Exterior Mirrors (2)
All prices and specifications subject to change without notice 94 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
1 - NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2ES0 $118,719
200AM29 $0
200B2KY $9,309
200B2KZ $7,465
200B2ZY $11,613
200B2ZZ $9,770
200B3JZ $13,911
200CF37 $3,882
200CF39 $15,586
200DE60 $0
200DE66 $0
200EQ96 $0
200EQ97 $2,975
200EQ98 $5,307
200EQ99 $11,588
200ER01 $11,588
200EY31 $5,307
200EY32 $11,588
200EY33 $11,588
200FE10 $0
200FE11 $1,051
200FE12 $1,051
200FF78 $1,051
200GA40 $0
200GA54 $0
200GA68 $0
French Territory Pack For Use with Thumb
Spanish Territory Pack For Use with Thumb
Michelin Power CL 440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin BIBLOAD 440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
CAB/CANOPY: (E)
Canopy, Vinyl Suspension Seat
Michelin XMCL440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin Power CL 440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
BASE MACHINE (E)
MODEL PACK: (E)
4CX-15 Super 109hp CM Model Pack, Advanced Easy Controls
TIRES and TRANSMISSIONS: (E)
EFFECTIVE:
JANUARY 1,
2018
English Territory Pack For Use with Thumb
LOADER PIPEWORK: (E)
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool Float & Reset
5/8 Loader Pipework, Return To Dig (RTD) Auto SRS, 3 Spool Float & Reset for Hammer Circuit.
TERRITORY PACKS (E)
Cab with A/C, Heated Air Suspension Seat. Includes 110v Engine Block Heater.
Hammer/Bi-Directional Pipework,
Cab, LIVELINK
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework, no Boom End Dampening, Heavy Lift
Canopy, LIVELINK
ENCLOSURE CONTROLS: (E)
4CX-15 SUPER BACKHOE LOADER 2ES0
4CX-15 SUPER, 4WD, 4WS, 109hp T4F, 15ft Centermount Backhoe with ExtraDig Extending Dipper. 150A
Alternator, 750lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear
Worklights, Battery Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and
Telescopic Steering Wheel.
5/8 Loader Pipework Return To Dig (RTD) Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
Hydraulic Thumb (Not For Quick Hitch Use)
Hydraulic Thumb (For Quick Hitch Use)
Hammer Pipework
Hammer/Bi-Directional Pipework
Hydraulic Thumb (Not For Quick Hitch Use)
Hydraulic Thumb (For Quick Hitch Use)
All prices and specifications subject to change without notice 95 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
2 - OPTIONS: Back to Index
200HA50 $2,142
200HA92 $4,435
200HA93 Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA57 $4,660
200NA58 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
4CX-15 SUPER BACKHOE LOADER 2ES0
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Mechanical Quick Hitch with 1 Ton Shackle
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
LOADER BUCKET OPTIONS
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with
Bolt on Cutting Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on
Cutting Edge.
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on
Cutting Edge.
Code Required For Excavator Quickhtes
LOADER BUCKETS
Q-Fit Tool Carrier Quick Hitch
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with
Thumb
110v Engine Block Heater For Canopy (Standard on Cab builds)
EFFECTIVE:
JANUARY 1,
2018
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
Headlights
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Excavator Bucket Pivot Pin Set
All prices and specifications subject to change without notice 96 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
2 - OPTIONS: Continued Back to Index
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA56 $455
200RA59 $590
200RA68 $0
200RA77 $1,104
Stabilizer Ram Guards - Centermount
AEC Canopy Adjustments
LED Worklights
EFFECTIVE:
JANUARY 1,
2018
Flipover Stabilizer Feet - Centermount
Seat Headrest
Seatbelt (3in)
4CX-15 SUPER BACKHOE LOADER 2ES0
ADDITIONAL OPTIONS
AutoPRE-HEAT
Exterior Mirrors (2)
All prices and specifications subject to change without notice 97 Backhoe Loader USD Price Pages
2018
JCB BACKHOE LOADER
3CX-14 SUPERSIDE-SHIFT
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice 98 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGESF.O.B. SAVANNAH, GA EFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT Back to Index
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks with the exception of the Diesel Exhaust Fluid (DEF) tank
operate with ignition key. Front and rear horn buttons. Automatic backup alarm.
ENGINE 109HP gross, turbocharged, water-cooled, 4 cyl, direct injection diesel. T4F compliant
engine with Selective Catalytic Reduction (SCR) and 5 gallon DEF tank. Hand and foot throttle. Selective
full flow pressure engine oil lubrication with spin-on filter cartridge. Air to fluid coolers. Separately
serviceable radiator, hydraulic and transmission oil coolers. Two stage fuel filtering system utilizing a
water/sediment separator and spin-on type filter element. Dual element air filter, dry type with cleanable
outer element, replaceable inner element and under hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear selection
with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake. Transmission shifts
to neutral when park brake is activated. 4 wheel braking in 2 wheel drive activated by switch.
STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked
turning circle - 26' 5".
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, reinforced top & bottom rear frame plates (side-shift). Fabricated boom and dipper.
SAE maximum dig depth: Extradig dipper - 13' 11" - 17' 11". EasyControl backhoe controls.
Fabricated stabilizer legs with anti-drift valves. 11,000 lb. lifting hook as standard.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 32".
Auto Smooth Ride System (AutoSRS). Front bumper protection fitted as standard.
3CX-14 SUPER SS BACKHOE LOADER
All prices and specifications subject to change without notice 99 Backhoe Loader USD Price Pages
U.S. DOLLAR PRICE
PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT (CONT.) Back to Index
ELECTRICAL SYSTEM 12 volt system with 150 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs. AutoTHROTLE returns engine speed to pre-set hand throttle
position when work is resumed. AutoDRIVE provies cruise control-type characteristics during roading.
Advanced Easy Controls and Easy Controls only: AutoSTABILIZERS and AutoBOOMLOCK.
HYDRAULIC SYSTEM Open center system, variable displacement piston pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts. Auto Idle reduces engine speed
when no hydraulic functions are requested.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 40 gallon fuel tank. 20 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval.
1000 hour DEF filter interval. 1000 hour transmission oil and 500 hour transmission filter service
interval. 2000 hour hydraulic oil and 500 hour hydraulic filter service interval. External Toolbox.
AutoCHECK automatically performs daily under hood maintenance checks on 'key on'
TELEMATICS JCB Livelink telematics. Monitored and managed remotely via a PC or Smartphone. Two year
subscription. Real time reporting of machine hours, routine maintenance alerts, location,
critical health alerts, fuel level/consumption and work cycle information. Ability to set
machine geo-fences and curfews for improved security.
3CX-14 SUPER SS BACKHOE LOADER
All prices and specifications subject to change without notice 100 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2DW4 $94,879
200AM11 $0
200B3ZF $11,088
200B3ZJ $12,932
200B7KF $7,863
200B7KJ $9,707
200B7SF $9,246
200B7SJ $11,088
200CF20 $3,882
200CF22 $15,586
200DE42 $0
200DE48 $0
200EY79 $0
200EY80 $2,975
200EY81 $5,307
200EY82 $11,588
200EY83 $11,588
200FD98 $0
200FD99 $1,051
200FE04 $1,051
200GA29 $0
200GA36 $0
200GA43 $0
200GA50 $0
200GA57 $0
200GA64 $0
3CX-14 Super 109hp SS Model Pack, Easy Controls
Spanish Territory Pack For Use with Thumb
3CX-14 SUPER SS BACKHOE LOADER 2DW4EFFECTIVE:
JANUARY 1, 2018
BASE MACHINE (E)
3CX-14 SUPER, 4WD, 2WS, 109hp T4F, 14ft Side-Shift Backhoe with ExtraDig Extending Dipper. 150A Alternator, 400lbs
Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear Worklights, Battery Isolator,
Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and Telescopic Steering Wheel.
MODEL PACK: (E)
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
CAB/CANOPY: (E)
Canopy, Vinyl Suspension Seat
TIRES and TRANSMISSIONS: (E)
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Michelin XMCL 340/80-18 & 440/80-28 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
ENCLOSURE CONTROLS: (E)
Canopy, LIVELINK
Cab, LIVELINK
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
Hammer Pipework
Hammer/Bi-Directional Pipework,
Hydraulic Thumb (Not For Quick Hitch Use)
Hydraulic Thumb (For Quick Hitch Use)
LOADER PIPEWORK: (E)
French Territory Pack For Use with Thumb
Spanish Territory Pack
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool Float & Reset
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
TERRITORY PACKS (E)
English Territory Pack
English Territory Pack For Use with Thumb
French Territory Pack
All prices and specifications subject to change without notice 101 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
OPTIONS: Back to Index
200HA90 $4,435
200HA91 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA27 $4,660
200NA29 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
Code Required For Excavator Quickhtes
3CX-14 SUPER SS BACKHOE LOADER 2DW4EFFECTIVE:
JANUARY 1,
2018
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
BACKHOE BUCKET OPTIONS
LOADER BUCKETS
Q-Fit Tool Carrier Quick Hitch
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on
Cutting Edge
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
Headlights
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
Excavator Bucket Pivot Pin Set
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
110v Engine Block Heater For Canopy (Standard on Cab builds)
All prices and specifications subject to change without notice 102 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
200RA05 $933
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA77 $1,104
EFFECTIVE:
JANUARY 1,
2018
ADDITIONAL OPTIONS
750lb (340kg) Counterweight
AutoPRE-HEAT
Exterior Mirrors (2)
Seat Headrest
Seatbelt (3in)
Front Fenders
LED Worklights
3CX-14 SUPER SS BACKHOE LOADER 2DW4
All prices and specifications subject to change without notice 103 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2DW5 $99,879
200AM11 $0
200B3ZF $11,088
200B3ZJ $12,932
200B7KF $7,863
200B7KJ $9,707
200B7SF $9,246
200B7SJ $11,088
200CF20 $3,882
200CF22 $15,586
200DE42 $0
200DE48 $0
200EY89 $0
200EY90 $2,975
200EY91 $5,307
200EY92 $11,588
200EY93 $11,588
200FD98 $0
200FD99 $1,051
200FE04 $1,051
200GA29 $0
200GA36 $0
200GA43 $0
200GA50 $0
200GA57 $0
200GA64 $0
3CX-14 Super 109hp SS Model Pack, Easy Controls
Spanish Territory Pack For Use with Thumb
3CX-14 SUPER SS BACKHOE LOADER 2DW5EFFECTIVE:
JANUARY 1, 2018
BASE MACHINE (E)
3CX-14 SUPER, 4WD, 2WS, 109hp T4F, 14ft Side-Shift Backhoe with ExtraDig Extending Dipper and PowerSlide. 150A
Alternator, 400lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear
Worklights, Battery Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and Telescopic
Steering Wheel.
MODEL PACK: (E)
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
CAB/CANOPY: (E)
Canopy, Vinyl Suspension Seat
TIRES and TRANSMISSIONS: (E)
Michelin XMCL 340/80-18 & 440/80-28 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Michelin XMCL 340/80-18 & 440/80-28 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 12.5-18-10 & 21L-24-10 includes Autoshift Transmission with LSD & TorqueLock, 4WD/2WS
Galaxy Industrial 14-17.5-10 & 19.5L-24-12 includes Powershift Transmission with LSD & TorqueLock, 4WD/2WS
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
ENCLOSURE CONTROLS: (E)
Canopy, LIVELINK
Cab, LIVELINK
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
Hammer Pipework
Hammer/Bi-Directional Pipework,
Hydraulic Thumb (Not For Quick Hitch Use)
Hydraulic Thumb (For Quick Hitch Use)
LOADER PIPEWORK: (E)
French Territory Pack For Use with Thumb
Spanish Territory Pack
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool Float & Reset
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
TERRITORY PACKS (E)
English Territory Pack
English Territory Pack For Use with Thumb
French Territory Pack
All prices and specifications subject to change without notice 104 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
OPTIONS: Back to Index
200HA90 $4,435
200HA91 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA27 $4,660
200NA29 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on
Cutting Edge
3CX-14 SUPER SS BACKHOE LOADER 2DW5EFFECTIVE:
JANUARY 1,
2018
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
Code Required For Excavator Quickhtes
LOADER BUCKETS
Q-Fit Tool Carrier Quick Hitch
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
Excavator Bucket Pivot Pin Set
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Headlights
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
110v Engine Block Heater For Canopy (Standard on Cab builds)
All prices and specifications subject to change without notice 105 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
200RA05 $933
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA57 $450
200RA77 $1,104
EFFECTIVE:
JANUARY 1,
2018
ADDITIONAL OPTIONS
750lb (340kg) Counterweight
AutoPRE-HEAT
Exterior Mirrors (2)
Seat Headrest
Seatbelt (3in)
Front Fenders
LED Worklights
3CX-14 SUPER SS BACKHOE LOADER 2DW5
All prices and specifications subject to change without notice 106 Backhoe Loader USD Price Pages
2018
JCB BACKHOE LOADER
4CX-14 SUPERSIDE-SHIFT
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice 107 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
EFFECTIVE:
JANUARY 1, 2018
STANDARD EQUIPMENT Back to Index
SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and
retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom
lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-
able cab, hydraulic fill, fuel cap. All locks with the exception of the Diesel Exhaust Fluid (DEF) tank
operate with ignition key. Front and rear horn buttons. Automatic backup alarm.
ENGINE 109HP gross, turbocharged, water-cooled,4 cyl, direct injection diesel. T4F compliant engine with
Selective Catalytic Reduction (SCR) and 5 gallon DEF tank. Hand and foot throttle. SelectiveFull flow
pressure engineoil lubrication with spin-on filter cartridge. Air to fluid coolers. Separately serviceable
radiator, hydraulic and transmission oil coolers. Two stage fuel filtering system utilizing a water/sediment
separator and spin-on type filter element. Dual element air filter, dry type with cleanable outer element,
replaceable inner element and under hood pre-cleaner.
TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.
Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.
Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear selection
with 4 Fwd / 4 Rev speeds.
FRONT AXLE 4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD
shift-on-the-go; steering cylinder located behind front axle.
REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty
double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-
matic equalization of wheel spin under conditions of unequal footing.
BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.
Power assisted, hydraulic brakes. Independent over center actuation, park brake. Transmission shifts
to neutral when park brake is activated. 4 wheel braking in 2 wheel drive activated by switch.
STEERING 4 Wheel Steer. Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock).
Unbraked turning circle - 26' 5". Three steer modes, 2-wheel steer, 4-wheel steer and crab steer.
BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing
MAINFRAME cylinder pins, reinforced top & bottom rear frame plates (side-shift). Fabricated boom and dipper.
SAE maximum dig depth: Extradig dipper - 14' 2" - 18' 2". EasyControl backhoe controls.
Fabricated stabilizer legs with anti-drift valves. 11,000 lb. lifting hook as standard.
LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump
cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".
Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 32".
Auto Smooth Ride System (AutoSRS). Front bumper protection fitted as standard.
Heavy Lift loader arms standard
4CX-14 SS SUPER BACKHOE LOADER F.O.B. SAVANNAH, GA
All prices and specifications subject to change without notice 108 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE:
JANUARY 1, 2018
STANDARD EQUIPMENT (CONT.) Back to Index
ELECTRICAL SYSTEM 12 volt system with 150 amp alternator std. Wiring harness & outside cab connectors meet IP69
standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.
Inside cab connectors meet IP67 standard for protection against ingress of dust, and water
when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four
halogen work lights in front and four separate halogen work lights in the rear. Stop lights,
turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a
tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.
Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission
oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake
engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt
outlet for powered accessories. Common fuses and relays located in an easy access panel.
Main circuit breakers at battery positive terminal for added circuit protection.
Battery Isolator fitted as standard.
OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and
ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,
tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,
interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab
includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with
wiper and washer that acts as a shield during inclement weather, heater with defogger vents,
and radio pre-wire with speakers in-cabs. AutoTHROTLE returns engine speed to pre-set hand throttle
position when work is resumed. AutoDRIVE provies cruise control-type characteristics during roading.
Advanced Easy Controls and Easy Controls only: AutoSTABILIZERS and AutoBOOMLOCK.
HYDRAULIC SYSTEM Open center system, variable displacement piston pump, engine driven, 44 gpm @ 3650 psi.
Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground
level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times
working pressure. Structural steel pipes to withstand minor impacts. Auto Idle reduces engine speed
when no hydraulic functions are requested.
SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield
AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,
fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second
engine manifold preheat (activated through ignition switch). 40 gallon fuel tank. 20 gallon
hydraulic tank with 5 micron filter. 500 hour engine oil and filter service interval.
1000 hour DEF filter interval. 1000 hour transmission oil and 500 hour transmission filter service
interval. 2000 hour hydraulic oil and 500 hour hydraulic filter service interval. External Toolbox.
AutoCHECK automatically performs daily under hood maintenance checks on 'key on'
TELEMATICS JCB Livelink telematics. Monitored and managed remotely via a PC or Smartphone. Two year
subscription. Real time reporting of machine hours, routine maintenance alerts, location,
critical health alerts, fuel level/consumption and work cycle information. Ability to set
machine geo-fences and curfews for improved security.
4CX-14 SS SUPER BACKHOE
LOADER
All prices and specifications subject to change without notice 109 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B. SAVANNAH,
GA
NEW FACTORY BUILT CUSTOM ORDERS: ESSENTIAL CODES Back to Index
2DX9 $118,419
200AM38 $0
200B1LY $7,465
200B1LZ $9,309
200B1NY $9,770
200B1NZ $11,613
200CF23 $3,882
200CF25 $15,586
200DE42 $0
200DE48 $0
200EY89 $0
200EY90 $2,975
200EY91 $5,307
200EY92 $11,588
200EY93 $11,588
200FE02 $0
200FE03 $1,051
200FE06 $1,051
200GA31 $0
200GA40 $0
200GA45 $0
200GA54 $0
200GA59 $0
200GA68 $0
4CX-14 Super 109hp SS Model Pack, Easy Controls
Spanish Territory Pack For Use with Thumb
4CX-14 SUPER SS BACKHOE LOADER 2DX9EFFECTIVE:
JANUARY 1, 2018
BASE MACHINE (E)
4CX-14 SUPER, 4WD, 4WS, 109hp T4F, 14ft Centermount Backhoe with ExtraDig Extending Dipper and PowerSlide.
150A Alternator, 100lbs Counterweight. Includes 2 Spool Loader Valve, Flipover Feet, Interior Mirror, Front and Rear
Worklights, Battery Isolator, Toolbox and Automate (AutoCheck, AutoIdle, AutoDrive and AutoThrottle) and Telescopic
Steering Wheel.
MODEL PACK: (E)
Canopy, LIVELINK
TIRES and TRANSMISSIONS: (E)
Michelin Power CL 440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin Power CL 440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Powershift Transmission with TorqueLock & Front & Rear LSD, AWS
Michelin XMCL440/80-28 includes Autoshift Transmission with TorqueLock & Front & Rear LSD, AWS
CAB/CANOPY: (E)
Canopy, Vinyl Suspension Seat
Cab with A/C, Cloth Suspension Seat. Includes 110v Engine Block Heater.
ENCLOSURE CONTROLS: (E)
TERRITORY PACKS (E)
Cab, LIVELINK
BACKHOE PIPEWORK: (E)
No Auxiliary Pipework
Hammer Pipework
Hammer/Bi-Directional Pipework,
Hydraulic Thumb (Not For Quick Hitch Use)
Hydraulic Thumb (For Quick Hitch Use)
LOADER PIPEWORK: (E)
No Loader Pipework. Includes Return To Dig (RTD) & Auto SRS
5/8 Loader Pipework. Includes Return To Dig (RTD), Auto SRS, 3 Spool Float and Reset.
5/8 Loader Pipework, Return To Dig (RTD), Auto SRS, 3 Spool, Float, Reset for Bi-Directional Circuit.
English Territory Pack
English Territory Pack For Use with Thumb
French Territory Pack
French Territory Pack For Use with Thumb
Spanish Territory Pack
All prices and specifications subject to change without notice 110 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGESF.O.B. SAVANNAH, GA
OPTIONS: Back to Index
200HA90 $4,435
200HA91 $4,435
200HD85 $0
200JA61 $2,977
200JA78 $6,424
200JA80 $7,310
200JA82 $2,769
200JA85 $5,806
200JA86 $6,407
200JA87 $9,458
200JA88 $3,314
200KA10 $2,469
200MA36 $151
200MA48 $1,098
200MA49 $1,298
200MA50 $1,298
200MA51 $1,461
200MA52 $1,775
200NA59 $4,660
200NA61 $4,660
200PB01 $197
200PB05 $117
200PB18 $267
Q-Fit Hitch and General Purpose Loader Bucket: Includes Q-Fit Toolcarrier + 92in (2350mm), 1.4yd3 (1.1m3) Standard Duty with Bolt on
Cutting Edge
4CX-14 SUPER SS BACKHOE LOADER 2DX9EFFECTIVE:
JANUARY 1,
2018
BACKHOE QUICK HITCH OPTIONS (Must order both HA and HD codes)
Hydraulic Excavator Quick Hitch with Lifting Kit and 5T Shackle
Hydraulic Excavator Quick Hitch (HMR/BI-DI) with Lifting Kit and 5T Shackle
Code Required For Excavator Quickhtes
LOADER BUCKETS
Q-Fit Tool Carrier Quick Hitch
Direct Mount 6-in-1 Multipurpose Loader Bucket, 92in (2350mm), 1.3yd3 (1.0m3). Standard Duty with Bolt on Cutting Edge.
Direct Mount 6-in-1 Multipurpose Loader Bucket, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Direct Mount General Purpose Loader Bucket, 92in (2350mm), 1.4yd3 (1.1m3), Heavy Duty with Bolt on Cutting Edge.
Backhoe Bucket - 30in (750mm) Heavy Duty 5 Teeth
Q-Fit General Purpose Loader Bucket: Includes Q-Fit Toolcarrier, 96in (2438mm), 1.6yd3 (1.3m3) Standard Duty with Bolt on Cutting Edge.
Q-Fit 6-in-1 Multipurpose Loader Bucket: Includes Q-Fit Toolcarrier, 92in (2350mm), 1.3yd3 (1.0m3) Standard Duty with Bolt on Cutting
Direct Mount General Purpose Loader Bucket 92in (2350mm), 1.4yd3 (1.1m3) Heavy Duty with Bolt on Cutting Edge for use with Thumb
LOADER BUCKET OPTIONS
Q-Fit Mounted Fork Frame and 48in Forks.
BACKHOE BUCKET OPTIONS
Excavator Bucket Pivot Pin Set
Backhoe Bucket - 12in (300mm) Heavy Duty 3 Teeth
Backhoe Bucket - 18in (450mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 4 Teeth
Backhoe Bucket - 24in (600mm) Heavy Duty 5 Teeth
Headlights
HAND HELD TOOL CIRCUITS
9M Hose Reel with Hand Held Tool Circuit
9M Hose Reel with Hand Held Tool Circuit For Use with Bi-Directional
VEHICLE ELECTRICAL OPTIONS
Rotating Amber Beacon
110v Engine Block Heater For Canopy (Standard on Cab builds)
All prices and specifications subject to change without notice 111 Backhoe Loader USD Price Pages
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH,
OPTIONS: Continued Back to Index
200RA04 $631
200RA06 $974
200RA20 $184
200RA36 $83
200RA37 $88
200RA77 $1,104
Seat Headrest
Seatbelt (3in)
LED Worklights
4CX-14 SUPER SS BACKHOE LOADER 2DX9EFFECTIVE:
JANUARY 1,
2018
ADDITIONAL OPTIONS
562lb (255kg) Counterweight
AutoPRE-HEAT
Exterior Mirrors (2)
All prices and specifications subject to change without notice 112 Backhoe Loader USD Price Pages
2018
JCB COMPACT EXCAVATOR
18Z-1
EFFECTIVE: June 20, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
18Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: June 20, 2018
STANDARD EQUIPMENT
ENGINE 1.13 litre Perkins Tier IV Final engine , 21.9 net hp, centrifugal dry type air cleaner.
Water separator, spin - on oil filter, thermostart assist, anti-freeze protection to -35 degrees F.
500 hour service interval - twice as long as previous model.
TRANSMISSION Independent track control. Hydraulic pumps drive integral track motors and gearbox.
Two speed travel - 1.5 mph in low and 2.5 mph in high. Auto kickdown feature allows machine to
automatically change from high to low when needed, maximizing power and productivity.
TRACKS Rubber or steel track options hydraulically adjusted. Under carriage rollers 3 per side. Track width 9".
Ground pressure 4.7 lbs per square inch. Ground clearance 6". Hydraulically actuated expanding
undercarriage providing a machine width of 3'3" retracted and 11'8" expanded. Track tension
is maintained through a grease cylinder
ELECTRICAL 12 volt, 60 Ah battery, with 40 amp alternator. Waterproof wire harness connectors meet/exceed
IP67 electrical system rating.
EXCAVATOR Max. dig depth with standard 43.3" dipper is 7'. New tubular boom design provides increased strength,
visibility and improved hose and tube protection vs. conventional steel box structure design.
Dual Pattern Controls (DPC) easily changes controls from ISO (Excavator) to SAE (Backhoe).
Auxiliary circuit provides 8.4 GPM for JCB hydraulic breakers and other approved attachments.
Boom swing left 55 degrees, right 75 degrees. Bucket rotation 201 degrees. Less excavator bucket.
CAB / CANOPY Meets SAE TOPS/FOPS/FOGS, left side entry. 24% larger cab with increased leg and shoulder room
for the operator. Vinyl adjustable operators seat, Removable floor mat that is easy to clean.
Excavator controls are servo operated (hydraulic) . Redesigned track levers with T bar handles.
All models equipped with safety 2 go system
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - YELLOW SERIES PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 2 of 11 USD Price Page
18Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: June 20, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
Yellow Series Package Build
SALES
CODE ITEM
8184 18Z-1 ZERO TAILSWING TARCKED
830A109 4 POST CANOPY WITH FRONT POLYCARBONATE SCREEN PROTECTION:ROPS/TOPS/FOPS CERTIFIED
830B101 RUBBER TRACKS SHORT PITCH
830C111 ISO/SAE CONTROL PATTERN: HIGHFLOW; DOUBLE ACTING AUX:RETRACTABLE U/C
830D101 STATIC VINYL SEAT
830E117 ENGLISH (US) LANGUAGE PACK
830F104 DIPPER 1100MM
830G101 STANDARD DOZER WITH SWING OUTEXTENSIONS
830J115 LIVELINK
830J117 HALOGEN WORKLIGHTS KIT FOR 4PCAN: 2 FRONT / 1 REAR & BOOM /INTERIOR LIGHT STD
830M104 BUCKET GP 450mm WITH TEETHNO PIVOT PINS SUPPLIED
SUGGESTED LIST PRICE $31,704
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a
machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 11 USD Price Page
18Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: June 20,
2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8184 18Z-1 ZERO TAILSWING TARCKED $25,230
OPERATORS AREA (E)
830A109 $813
UNDERCARRIAGE (E)
830B101 RUBBER TRACKS SHORT PITCH $1,369
830B102 STEEL TRACKS 230MM $2,038
CONTROLS (E)
830C108 ISO CONTROL PATTERN: HIGH FLOW; SINGLE ACTING AUX: RETRACTABLE U/C $1,873
830C109 ISO/SAE CONTROL PATTERN: HIGHFLOW; SINGLE ACTING AUX:RETRACTABLE U/C $2,589
830C110 ISO CONTROL PATTERN: HIGH FLOW; DOUBLE ACTING AUX: RETRACTABLE U/C $1,983
830C111 ISO/SAE CONTROL PATTERN: HIGHFLOW; DOUBLE ACTING AUX:RETRACTABLE U/C $2,630
SEATS (E)
830D101 STATIC VINYL SEAT $0
830D103 VINYL SUSPENSION SEAT $424
OPERATORS HANDBOOK (E)
830E117 ENGLISH (US) LANGUAGE PACK $0
830E129 FRENCH (CANADA) LANGUAGE PACK $0
DIPPER (E)
830F101 DIPPER 950MM $264
830F104 DIPPER 1100MM $355
DOZER (E)
830G101 STANDARD DOZER WITH SWING OUTEXTENSIONS $0
830G103 LONG DOZER BLADE WITH SWING OUT EXTENSIONS $317
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting
one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer
Fit Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 11 USD Price Page
18Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: June 20,
2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
TRACK MOTOR OPTIONS
830H100 AUTO KICK DOWN TRACK MOTORS $323
OPERATORS COMPARTMENT OPTIONS
830J100 ROTATING BEACON $81
830J101 MAGNETIC STROBE WARNING LIGHTBEACON $133
830J102 SEATBELT ENGAGED GREEN BEACON $230
830J106 KEY IMMOBILISER (NON UK) $547
830J111 LED BOOMLIGHT AND GUARD $152
830J115 LIVELINK $499
830J116 HALOGEN WORKLIGHTS KIT FOR 2PCAN: 2 FRONT / 1 REAR & BOOM /INTERIOR LIGHT STD $0
830J117 HALOGEN WORKLIGHTS KIT FOR 4PCAN: 2 FRONT / 1 REAR & BOOM /INTERIOR LIGHT STD $310
830J118 LED WORKLIGHT KIT FOR 2P CAN:2 FRONT/ 1 REAR / LED BOOM LIGHT $0
830J119 LED WORKLIGHT KIT FOR 4P CAN:2 FRONT/ 1 REAR / LED BOOM LIGHT $859
GUARD OPTIONS
830K103 2 FRONT WORKLIGHT GUARDS $116
830K107 STREET PADS FOR ALL DOZER OPTIONS $166
BUCKET OPTIONS
830M100 BUCKET GP 150mm WITH TEETHNO PIVOT PINS SUPPLIED $394
830M101 BUCKET GP 230mm WITH TEETHNO PIVOT PINS SUPPLIED $427
830M102 BUCKET GP 300mm WITH TEETHNO PIVOT PINS SUPPLIED $450
830M103 BUCKET GP 400mm WITH TEETHNO PIVOT PINS SUPPLIED $492
830M104 BUCKET GP 450mm WITH TEETHNO PIVOT PINS SUPPLIED $498
830M105 BUCKET GP 600mm WITH TEETHNO PIVOT PINS SUPPLIED $555
830M106 BUCKET DITCHING 750mm NO PIVOTPINS SUPPLIED $220
830M107 BUCKET DITCHING 1000mm NO PIVOT PINS SUPPLIED $342
830M108 1 ADDITIONAL SET OF PIVOT PINSFOR ATTACHMENTS $77
830M109 2 ADDITIONAL SET OF PIVOT PINSFOR ATTACHMENTS $153
830M110 3 ADDITIONAL SET OF PIVOT PINSFOR ATTACHMENTS $230
830M116 BUCKET GP 150mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $227
830M117 BUCKET GP 230mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $250
830M118 BUCKET GP 300mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $258
830M119 BUCKET GP 400mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $294
830M120 BUCKET GP 450mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $308
830M121 BUCKET GP 600mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $353
830M122 BLADED BUCKET GP 150mm AND PINS FOR Q/HITCH OPTION $255
830M123 BLADED BUCKET GP 230mm AND PINS FOR Q/HITCH OPTION $284
830M124 BLADED BUCKET GP 300mm AND PINS FOR Q/HITCH OPTION $311
830M125 BLADED BUCKET GP 400mm AND PINS FOR Q/HITCH OPTION $342
830M126 BLADED BUCKET GP 450mm AND PINS FOR Q/HITCH OPTION $372
830M127 BLADED BUCKET GP 600mm AND PINS FOR Q/HITCH OPTION $442
830M128 ADAPTOR PLATE FOR JCB 25MM BUCKET PINS $122
830M129 CONVERSION BRACKET FOR KUBOTABUCKETS $220
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 11 USD Price Page
18Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: June 20,
2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OTHER OPTIONS
830L101 FIRE EXTINGUISHER CANOPY $150
830L104 GREASE GUN & CARTRIDGE $41
830L105 SUNBLIND $132
830L107 TOOLKIT $133
830L115 DOCUMENT BOX FOR 4 POST CANOPYONLY $183
830L126 HYDRAULIC BIODEGRADABLE OIL $666
EXCAVATOR QUICK HITCH
830M111 QUICKHITCH MECHANICAL:FOR 30MMPIN SIZE BUCKETS $1,034
830M112 QUICKHITCH - MECHANICAL:TO CONVERT TO 25MM PIN SIZE BUCKETS $880
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 18Z-1
All prices and specifications subject to change without notice page 6 of 11 USD Price Page
2018
JCB COMPACT EXCAVATOR
19C-1
EFFECTIVE: June 20, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
19C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: June 20, 2018
STANDARD EQUIPMENT
ENGINE 1.13 litre Perkins Tier IV Final engine , 21.9 net hp, centrifugal dry type air cleaner.
Water separator, spin - on oil filter, thermostart assist, anti-freeze protection to -35 degrees F.
500 hour service interval - twice as long as previous model.
TRANSMISSION Independent track control. Hydraulic pumps drive integral track motors and gearbox.
Two speed travel - 1.5 mph in low and 2.5 mph in high. Auto kickdown feature allows machine to
automatically change from high to low when needed, maximizing power and productivity.
TRACKS Rubber or steel track options hydraulically adjusted. Under carriage rollers 3 per side. Track width 9".
Ground pressure 5.1 lbs per square inch. Ground clearance 6". Hydraulically actuated expanding
undercarriage providing a machine width of 3'3" retracted and 11'8" expanded. Track tension
is maintained through a grease cylinder
ELECTRICAL 12 volt, 60 Ah battery, with 40 amp alternator. Waterproof wire harness connectors meet/exceed
IP67 electrical system rating.
EXCAVATOR Max. dig depth with standard 43.3" dipper is 7'. New tubular boom design provides increased strength,
visibility and improved hose and tube protection vs. conventional steel box structure design.
Dual Pattern Controls (DPC) easily changes controls from ISO (Excavator) to SAE (Backhoe).
Auxiliary circuit provides 8.4 GPM for JCB hydraulic breakers and other approved attachments.
Boom swing left 55 degrees, right 75 degrees. Bucket rotation 201 degrees. Less excavator bucket.
CAB / CANOPY Meets SAE TOPS/FOPS/FOGS, left side entry. 24% larger cab with increased leg and shoulder room
for the operator. Cloth adjustable operators seat, Removable floor mat that is easy to clean.
Excavator controls are servo operated (hydraulic) . Redesigned track levers with T bar handles.
All models equipped with safety 2 go system
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 2 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 3 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 8 of 11 USD Price Page
19C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: June 20,
2018
SECTION 1 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8196 19C-1 Primary Build $25,843
OPERATORS AREA (E)
830A120 CAB WITH HEATER : WITH TOUGHENED GLASS/ GLASS LOWER DOOR $3,464
830A121 CAB WITH HEATER : WITH IMPACTPROTECTED GLASS/ GLASS LOWER DOOR $4,039
830A122 CAB WITH HEATER : WITH TOUGHENED GLASS/ STEEL LOWER DOOR $3,464
830A123 CAB WITH HEATER : WITH IMPACTPROTECTED GLASS/ STEEL LOWER DOOR $3,959
UNDERCARRIAGE (E)
830B101 RUBBER TRACKS SHORT PITCH $1,369
830B102 STEEL TRACKS 230MM $2,038
CONTROLS (E)
830C105 ISO/SAE CONTROL PATTERN: HIGHFLOW; SINGLE ACTING AUX:RETRACTABLE U/C $2,589
830C107 ISO/SAE CONTROL PATTERN: HIGHFLOW; DOUBLE ACTING AUX:RETRACTABLE U/C $2,630
SEATS (E)
830D100 STATIC FABRIC SEAT $0
830D101 STATIC VINYL SEAT $0
830D102 FABRIC SUSPENSION SEAT $424
830D103 VINYL SUSPENSION SEAT $424
OPERATORS HANDBOOK (E)
830E117 ENGLISH (US) LANGUAGE PACK $0
830E129 FRENCH (CANADA) LANGUAGE PACK $0
DIPPER (E)
830F100 DIPPER 950MM $264
830F103 DIPPER 1100MM $355
DOZER (E)
830G101 STANDARD DOZER WITH SWING OUTEXTENSIONS $0
830G103 LONG DOZER BLADE WITH SWING OUT EXTENSIONS $317
Please order a machine by selecting one code from each E (Essential) category below. Select Options and/or
Attachments from Section 2 or 3.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit
Section to change existing machines.
All prices and specifications subject to change without notice page 9 of 11 USD Price Page
19C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: June 20,
2018
SECTION 2 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
TRACK MOTOR OPTIONS
830H100 AUTO KICK DOWN TRACK MOTORS $323
OPERATORS COMPARTMENT OPTIONS
830J100 ROTATING BEACON $81
830J101 MAGNETIC STROBE WARNING LIGHTBEACON $133
830J102 SEATBELT ENGAGED GREEN BEACON $230
830J104 LIVELINK $499
830J107 PIN PAD IMMOBILISER $547
830J109 HALOGEN WORKLIGHTS KIT FOR CABBUILDS :2 FRONT / 1 REAR & BOOM / INTERIOR LIGHT STD $310
830J110 LED WORKLIGHT KIT FOR CAB BUILDS : 2 FRONT/ 1 REAR / LED BOOM LIGHT $859
830J111 LED BOOMLIGHT AND GUARD $152
830J115 LIVELINK $499
GUARD OPTIONS
830K100 FOGS GUARD KIT: LEVEL 1 OPERATOR PROTECTION FOR CAB MACHINESONLY $308
830K103 2 FRONT WORKLIGHT GUARDS $116
830K107 STREET PADS FOR ALL DOZER OPTIONS $166
BUCKET OPTIONS
830M100 BUCKET GP 150mm WITH TEETHNO PIVOT PINS SUPPLIED $394
830M101 BUCKET GP 230mm WITH TEETHNO PIVOT PINS SUPPLIED $427
830M102 BUCKET GP 300mm WITH TEETHNO PIVOT PINS SUPPLIED $450
830M103 BUCKET GP 400mm WITH TEETHNO PIVOT PINS SUPPLIED $492
830M104 BUCKET GP 450mm WITH TEETHNO PIVOT PINS SUPPLIED $498
830M105 BUCKET GP 600mm WITH TEETHNO PIVOT PINS SUPPLIED $555
830M106 BUCKET DITCHING 750mm NO PIVOTPINS SUPPLIED $220
830M107 BUCKET DITCHING 1000mm NO PIVOT PINS SUPPLIED $342
830M108 1 ADDITIONAL SET OF PIVOT PINSFOR ATTACHMENTS $77
830M109 2 ADDITIONAL SET OF PIVOT PINSFOR ATTACHMENTS $153
830M110 3 ADDITIONAL SET OF PIVOT PINSFOR ATTACHMENTS $230
830M116 BUCKET GP 150mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $227
830M117 BUCKET GP 230mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $250
830M118 BUCKET GP 300mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $258
830M119 BUCKET GP 400mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $294
830M120 BUCKET GP 450mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $308
830M121 BUCKET GP 600mm WITH TEETH ANDPINS FOR Q/HITCH OPTION $353
830M122 BLADED BUCKET GP 150mm AND PINS FOR Q/HITCH OPTION $255
830M123 BLADED BUCKET GP 230mm AND PINS FOR Q/HITCH OPTION $284
830M124 BLADED BUCKET GP 300mm AND PINS FOR Q/HITCH OPTION $311
830M125 BLADED BUCKET GP 400mm AND PINS FOR Q/HITCH OPTION $342
830M126 BLADED BUCKET GP 450mm AND PINS FOR Q/HITCH OPTION $372
830M127 BLADED BUCKET GP 600mm AND PINS FOR Q/HITCH OPTION $442
830M128 ADAPTOR PLATE FOR JCB 25MM BUCKET PINS $122
830M129 CONVERSION BRACKET FOR KUBOTABUCKETS $220
830V109 BUCKET TIPPING LINK LIFT OPTION: CANOPY BUILDS WITH 1344MM DIPPER ONLY $111
830V110 BUCKET TIPPING LINK LIFT OPTION: CAB BUILDS WITH 1344MM DIPPER ONLY $111
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 10 of 11 USD Price Page
19C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: June 20,
2018
SECTION 2 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OTHER OPTIONS
830L100 FIRE EXTINGUISHER CANOPY $0
830L103 BATTERY ISOLATOR $113
830L105 SUNBLIND $132
830L106 FIRE EXTINGUISHER CAB $150
830L107 TOOLKIT $133
830L112 FULL RADIO KIT $364
830L115 DOCUMENT BOX FOR 4 POST CANOPYONLY $183
830L116 DIPPER THUMB BRACKET ONLY $120
830L118 EXTERIOR MIRROR (LEFT HAND SIDE) $191
830L119 EXTERIOR MIRROR (RIGHT HAND SIDE) $89
830L126 HYDRAULIC BIODEGRADABLE OIL $666
EXCAVATOR QUICK HITCH
830M111 QUICKHITCH MECHANICAL:FOR 30MMPIN SIZE BUCKETS $1,034
830M112 QUICKHITCH - MECHANICAL:TO CONVERT TO 25MM PIN SIZE BUCKETS $880
SECTION 3 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 19C-1
All prices and specifications subject to change without notice page 11 of 11 USD Price Page
2018
JCB COMPACT EXCAVATOR
45Z-1
EFFECTIVE: January 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
45Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TRACKS
ELECTRICAL
EXCAVATOR
CANOPY Meets SAE TOPS/FOPS/FOGS requirements, left side entry Canopy equipped with adjustable vinyl
suspension mid-back seat. 45Z is available with Zero tailswing for operation in very tight,
confining areas. This design does not compromise serviceability or ergonomics of operator
compartment.
Tier IV Final compliant 48.7 SAE gross hp diesel engine, centrifugal dry type air cleaner. Water
separator, spin-on oil filter, thermostart assist, antifreeze protection to -35 degrees F.
Independent left and right track control. Hydraulic pumps drive integral track motors and
gearbox. Two speed travel 1.8 mph and 2.8 mph.
Rubber grease adjusted. Under carriage rollers 5 per side. Track width 13.7". Ground pressure
4.55 lbs per square inch. Ground clearance 12in .
12 volt, with 100 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness
connectors.
Maximum dig depth with standard dipper 11' 11". Servo controls, SAE and ISO patterns both
available on 45Z-1 Compact Excavator with DPC - Dual Pattern Control system. Auxiliary circuit
provides 23.7 GPM on high flow for JCB hydraulic breakers and other approved attachments.
Dozer control. Boom swing left 70 degree, right 55 degree. Less excavator bucket. Double
Acting Hydraulics Standard fit.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - YELLOW SERIES PACKAGE BUILD
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - YELOW SERIES
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT EXCAVATORS)
All prices and specifications subject to change without notice page 2 of 6 48Z USD Price Page
45Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
YELLOW SERIES PACKAGE BUILD CODE: 8454SALES 45Z-1
CODE ITEM CAB
8454 45Z-1 Compact Base Machine $48,694
840A450 Canopy (Non EU) $2,271
840B450 13.7" (350mm) Rubber Tracks $0
840C611 ISO/SAE Control Pattern: High& Low Flow; Double Acting Aux T4 (for 2 way blade) $3,322
840D600 Vinyl Suspension Seat (Mid-Back) $0
840E770 American Language Pack: Including Battery Isolator and Travel Alarm $302
840F451 5'7" (1450mm) Dipper: For High & Low flow Aux $0
840G450 Standard Dozer Blade $0
840H605 Dozer Float: For Machines Without Hydraulic Quick Hitch & 2 Way Blade $544
840M649 Thumb Ready Dipper $242
840M652 600MM Gp Bucket With Teeth: No pivot Pins Supplied $601
YWSLLLM ADD LIVELINK LITE INCLUDING 24MTHS AIRTIME SUBSCRIPTION $705
SUGGESTED LIST PRICE $56,802
Select the following machine PACKAGE BUILD code and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using
the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 48Z USD Price Page
45Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8454 45Z-1 Compact Base Machine $48,694
OPERATOR'S AREA (E)
840A450 $2,271
840B450 $0
840C603 ISO/SAE Control Pattern: Highflow; Single Acting Aux T4 $1,396
840C606 ISO Control Pattern: High Flow; Double Acting Aux: T4 $1,223
840C607 ISO/SAE Control Pattern: Highflow; Double Acting Aux T4 $1,869
840C610 ISO Control Pattern: High & Low Flow; Double Acting Aux: T4 (For 2 Way Blade) $2,676
840C611 ISO/SAE Control Pattern: High& Low Flow; Double Acting Aux T4 (for 2 way blade) $3,322
840D600 $0
840E770 $302
840F450 $0
840F451 $0
840G450 $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
840H603 Dozer Float: For Machines With Hydraulic Quick Hitch & 2 Wayblade $544
840H605 Dozer Float: For Machines Without Hydraulic Quick Hitch & 2 Way Blade $544
OPERATORS COMPARTMENT OPTIONS
840J056 Rotating Beacon $193
840J057 Magnetic Strobe Warning Lightbeacon: $343
840J072 Livelink $784
840J602 Pin Pad Immobiliser (Not Uk) $499
840J604 Halogen Worklights: 2 Front &1 Rear (Boom Light Fitted As Std) $225
840J605 Led Worklights: 2 Front,1 Boom& 1 Rear $800
840J606 Led Worklights: 4 Front,2 Boom& 1 Rear $1,188
Standard Dozer Blade
OPERATORS HANDBOOK (E)
American Language Pack: Including Battery Isolator and Travel Alarm
DIPPER (E)
5'7" (1450mm) Dipper: For High Flow Aux
5'7" (1450mm) Dipper: For High & Low flow Aux
DOZER BLADE (E)
Vinyl Suspension Seat (Mid-Back)
Canopy (Non EU)
UNDERCARRIAGE (E)
15.7" (400mm) Rubber Tracks
CONTROLS (E)
SEATS (E)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing
machines.
All prices and specifications subject to change without notice page 4 of 6 48Z USD Price Page
45Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR & BUCKET OPTIONS
840M649 Thumb Ready Dipper $242
840M650 400MM Gp Bucket With Teeth: No pivot Pins Supplied $504
840M651 450MM Gp Bucket With Teeth: No pivot Pins Supplied $533
840M652 600MM Gp Bucket With Teeth: No pivot Pins Supplied $601
840M653 900MM Gp Bucket With Teeth: No pivot Pins Supplied $765
840M654 Grading Bucket: 1500Mm Wide: No Pivot Pins Supplied $840
840M655 Grading Bucket: 1200Mm Wide: No Pivot Pins Supplied $615
840M656 Grading Bucket: 1800Mm Wide: No Pivot Pins Supplied $765
840M657 750MM Gp Bucket With Teeth: No pivot Pins Supplied $671
840M658 300MM Gp Bucket With Teeth: No pivot Pins Supplied $432
840M659 250MM Gp Bucket With Teeth: No pivot Pins Supplied $432
840M660 800MM Gp Bucket With Teeth: No pivot Pins Supplied $765
840M661 350MM Gp Bucket With Teeth: No pivot Pins Supplied $432
840M662 1 Additional Set Of Pivot pins $108
840M663 2 Additional Sets Of Pivot pins $218
840M664 3 Additional Sets Of Pivot pins $327
EXCAVATOR QUICK HITCH
840M647 Mechanical Quick Hitch: For Non Hbcv Machines $1,333
840M648 Mechanical Quick Hitch: For Hbcv Machines $1,333
OTHER OPTIONS
840K600 2 Front Worklight Guards $108
840K601 4 Front Worklight Guards $218
840L450 Bushed Kingpost $121
840L557 Exterior Mirrors (Left & Right) $162
840L559 Rear View Wide Angled Mirror (Mounted On Rear Of The Cab) $209
840L560 Fire Extinguisher: 1Kg Abc $87
840L561 External Left Hand Mirror: $87
840L575 White Noise Alarm: T4 $349
840L601 Refuelling Pump: $688
840L603 Cold Climate Kit: Inc Hd Battery,Grid Heater & Cold Climatefluids/Fuel (T4) $609
840L604 Block Heater 110V: Inc Grid Heater & Cold Climate Fluids/Fuel $231
840L605 Block Heater 230V: Inc Grid Heater & Cold Climate Fluids/Fuel $231
840L617 Toolkit & Grease Gun + Cartridge $76
840L618 Grease Gun + Cartridge $24
840L619 Hydraulic Biodegradable Oil: $1,759
840T450 Model Decals Supplied Loosewith Machine: Warning Decals fitted $0
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET
ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 48Z USD Price Page
45Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - Yellow Series Attachments
SALES U.S.
CODE ITEM LIST
YELLOW SERIES ATTACHMENTS
YWSMA07 30" GP Bucket $917
YWSMA08 36" GP Bucket $1,019
YWSMA09 48" Grading Bucket $1,280
YWSMA10 Mech. Quick Coupler $1,520
YWSMA11 Auger Drive $2,200
YWSMA12 HM026T Hammer $7,265
YWSMR03 REMOVE 840M662 1 ADDITIONAL SET OF PIVOT PINS FOR 245MM ATTACHMENTS -$108
YWSMR04 REMOVE 840M652 600MM GP BUCKET WITH TEETH: NO PIVOT PINS SUPPLIED: 245MM PIN CENTRES: 45MM PINS -$601
YWSLLLM ADD LIVELINK LITE INCLUDING 24MTHS AIRTIME SUBSCRIPTION $705
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET
ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 45Z
All prices and specifications subject to change without notice page 6 of 6 48Z USD Price Page
2018
JCB COMPACT EXCAVATOR
48Z-1
EFFECTIVE: January 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
48Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TRACKS
ELECTRICAL
EXCAVATOR
CAB Meets SAE TOPS/FOPS/FOGS requirements, left side entry Cab equipped with fabric suspension
seat and is adjustable forward and comes equipped with heater, wiper, front and side opening
windows. 48Z is available as Zero tailswing for operation in very tight, confining areas. This
design does not compromise serviceability or ergonomics of operator compartment.
Tier IV Final compliant 48.7 SAE gross hp diesel engine, centrifugal dry type air cleaner. Water
separator, spin-on oil filter, thermostart assist, antifreeze protection to -35 degrees F.
Independent left and right track control. Hydraulic pumps drive integral track motors and
gearbox. Two speed travel 1.8 mph and 2.8 mph.
Rubber (optional steel) grease adjusted. Under carriage rollers 5 per side. Track width 15.75".
Ground pressure 4.7 lbs per square inch. Ground clearance 12in .
12 volt, with 100 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness
connectors.
Maximum dig depth with standard dipper 11' 11". Servo controls, SAE and ISO patterns both
available on 48Z Compact Excavator with DPC - Dual Pattern Control system. Auxiliary circuit
provides 23.7 GPM for JCB hydraulic breakers and other approved attachments. Dozer control.
Boom swing left 70 degree, right 55 degree. Less excavator bucket. Double Acting Hydraulics
Standard fit.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - YELLOW SERIES PACKAGE BUILD
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - YELOW SERIES
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT EXCAVATORS)
All prices and specifications subject to change without notice page 2 of 6 48Z USD Price Page
48Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
YELLOW SERIES PACKAGE BUILD CODE: 8484SALES 48Z
CODE ITEM CAB
8484 48Z-1 Compact Base Machine $48,694
840A613 Cab With Air Condition (Standard Glass) $6,067
840B600 15.7" (400mm) Rubber Tracks $0
840C615 ISO/SAE Control Pattern: High& Low Flow; Double Acting Aux T4 (for 4 way blade) $3,322
840D603 Fabric Suspension Seat (High Back) $125
840E770 American Language Pack: Including Battery Isolator and Travel Alarm $302
840F601 5'7" (1450mm) Dipper: For High & Low flow Aux $0
840G602 4 Way Dozer Blade: For 57" (400mm) Wide Tracks $2,820
840H608 Dozer Float: For Machines With Hydraulic Quick Hitch & 4 Way Blade $544
840J604 Halogen Worklights: 2 Front &1 Rear (Boom Light Fitted As Std) $225
840L564 Full Radio Kit: $338
840L600 Bushed Kingpost $121
840M649 Thumb Ready Dipper $242
840M652 600MM Gp Bucket With Teeth: No pivot Pins Supplied $601
840M662 1 Additional Set Of Pivot pins $108
YWSLLLM Add LiveLink Lite including 24 months airtime subscription $705
SUGGESTED LIST PRICE $64,214
Select the following machine PACKAGE BUILD code and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using
the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 48Z USD Price Page
48Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8484 48Z-1 Compact Base Machine $48,694
OPERATOR'S AREA (E)
840A609 $3,922
840A613 $6,067
840A624 $2,271
840B600 $0
840B601 15.7" (400mm) Steel Tracks $0
840B602 21.7" (550mm) Steel Tracks $1,453
840B603 Bridgestone - 15.7" (400mm) Geogrip $5,370
840C602 ISO Control Pattern: High Flow; Single Acting Aux: T4 $751
840C603 ISO/SAE Control Pattern: Highflow; Single Acting Aux T4 $1,396
840C606 ISO Control Pattern: High Flow; Double Acting Aux: T4 $1,223
840C607 ISO/SAE Control Pattern: Highflow; Double Acting Aux T4 $1,869
840C610 ISO Control Pattern: High & Low Flow; Double Acting Aux: T4 (For 2 Way Blade) $2,676
840C611 ISO/SAE Control Pattern: High& Low Flow; Double Acting Aux T4 (for 2 way blade) $3,322
840C614 ISO Control Pattern: High & Low Flow; Double Acting Aux: T4 (For 4 Way Blade) $2,676
840C615 ISO/SAE Control Pattern: High& Low Flow; Double Acting Aux T4 (for 4 way blade) $3,322
840D600 $0
840D601 $0
840D602 $125
840D603 $125
840D604 $606
840E770 $302
840F600 $0
840F601 $0
840G600 $0
840G602 $2,820
840G603 $3,707
Standard Dozer Blade
4 Way Dozer Blade: For 57" (400mm) Wide Tracks
4 Way Dozer Blade: For 400MM Wide Tracks (Not Compatible With Dozer Float)
OPERATORS HANDBOOK (E)
American Language Pack: Including Battery Isolator and Travel Alarm
DIPPER (E)
5'7" (1450mm) Dipper: For High Flow Aux
5'7" (1450mm) Dipper: For High & Low flow Aux
DOZER BLADE (E)
Fabric Air Suspension Heated Seat (High Back) With Headrest
CONTROLS (E)
SEATS (E)
Cab With Heater (Standard Glass)
Cab With Air Condition (Standard Glass)
Canopy (Non EU)
UNDERCARRIAGE (E)
15.7" (400mm) Rubber Tracks
Vinyl Suspension Seat (Mid-Back)
Fabric Suspension Seat (Mid-Back)
Vinyl Suspension Seat (High Back)
Fabric Suspension Seat (High Back)
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing
machines.
All prices and specifications subject to change without notice page 4 of 6 48Z USD Price Page
48Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
840H600 Bucket To Grab Change Over Valve: For 1450Mm Dipper $585
840H603 Dozer Float: For Machines With Hydraulic Quick Hitch & 2 Wayblade $544
840H605 Dozer Float: For Machines Without Hydraulic Quick Hitch & 2 Way Blade $544
840H606 Dozer Float: For Machines With Hydraulic Quick Hitch & 4 Way Blade $544
840H608 Dozer Float: For Machines With Hydraulic Quick Hitch & 4 Way Blade $544
BOOM AND DIPPER OPTIONS
840V600 Dozer,Boom & Dipper Hbcv: (For high Flow Aux Without Hyd Quick Hitch) $1,135
840V602 Boom & Dipper Hbcv: (For High flow Aux Without Hyd Quick Hitch) $1,019
840V604 Dozer,Boom & Dipper Hbcv: (For high Flow Aux With Hyd Quick hitch) $1,135
840V606 Boom & Dipper Hbcv: (For Highflow Aux With Hyd Quick Hitch) $1,019
840V608 Dozer,Boom & Dipper Hbcv: (For high & Low Aux Without Hyd Quich Hitch) $1,135
840V610 Boom & Dipper Hbcv: (For High & Low Aux Without Hyd Quick Hitch) $1,019
840V612 Dozer,Boom & Dipper Hbcv: (For high &Low Aux With Hyd Quick hitch) $1,135
840V614 Boom & Dipper Hbcv: (For High & Low Aux With Hyd Quick Hitch) $1,019
OPERATORS COMPARTMENT OPTIONS
840J056 Rotating Beacon $193
840J057 Magnetic Strobe Warning Lightbeacon: $343
840J072 Livelink $784
840J603 Media Socket $99
840J604 Halogen Worklights: 2 Front &1 Rear (Boom Light Fitted As Std) $225
840J605 Led Worklights: 2 Front,1 Boom& 1 Rear $0
840J606 Led Worklights: 4 Front,2 Boom& 1 Rear $0
840J607 Halogen Worklights: 2 Front &1 Rear (Not For A/C Or Fogs) (Boom Light Fitted As Std) $225
840J608 Led Worklights: 2 Front,1 Boom& 1 Rear:(Not For A/C Or Fogsbuilds) $800
840J609 Led Worklights: 4 Front,2 Boom& 1 Rear:(Not For A/C Or Fogsbuilds) $1,188
EXCAVATOR & BUCKET OPTIONS
840M649 Thumb Ready Dipper $242
840M650 400MM Gp Bucket With Teeth: No pivot Pins Supplied $504
840M651 450MM Gp Bucket With Teeth: No pivot Pins Supplied $533
840M652 600MM Gp Bucket With Teeth: No pivot Pins Supplied $601
840M653 900MM Gp Bucket With Teeth: No pivot Pins Supplied $765
840M654 Grading Bucket: 1500Mm Wide: No Pivot Pins Supplied $840
840M655 Grading Bucket: 1200Mm Wide: No Pivot Pins Supplied $615
840M656 Grading Bucket: 1800Mm Wide: No Pivot Pins Supplied $765
840M657 750MM Gp Bucket With Teeth: No pivot Pins Supplied $671
840M658 300MM Gp Bucket With Teeth: No pivot Pins Supplied $432
840M659 250MM Gp Bucket With Teeth: No pivot Pins Supplied $432
840M660 800MM Gp Bucket With Teeth: No pivot Pins Supplied $765
840M661 350MM Gp Bucket With Teeth: No pivot Pins Supplied $432
840M662 1 Additional Set Of Pivot pins $108
840M663 2 Additional Sets Of Pivot pins $218
840M664 3 Additional Sets Of Pivot pins $327
840M701 Hydraulic Hitch: For High Flowaux With Hbcv T4 $3,876
840M705 Hydraulic Hitch: For High Flowaux Without Hbcv T4 $3,876
840M709 Pipework For Hyd Hitch: For High Flow Aux With Hbcv T4 $1,211
840M713 Pipework For Hyd Hitch: For High Flow Aux Without Hbcv T4 $1,211
840M717 Hydraulic Hitch: For High &Lowaux With Hbcv T4 $3,876
840M721 Hydraulic Hitch: For High &Lowaux Without Hbcv T4 (245mm Pincentres) Inc pipework $3,876
840M725 Pipework For Hyd Hitch: For High &Low Aux With Hbcv T4 $1,211
840M729 Pipework For Hyd Hitch: For High &Low Aux Without Hbcv T4 $1,211
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET
ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 6 48Z USD Price Page
48Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR QUICK HITCH
840M647 Mechanical Quick Hitch: For Non Hbcv Machines $1,333
840M648 Mechanical Quick Hitch: For Hbcv Machines $1,333
OTHER OPTIONS
840K549 Fogs Guard Kit, Level 1Operator Protection: $209
840K600 2 Front Worklight Guards $108
840K601 4 Front Worklight Guards $218
840K602 Dipper Ram Guard Protection (For Machines Without Hbcv) $249
840K603 Dipper Ram Guard Protection (For Machines With Hbcv) $249
840K624 Bucket Ram Guard Protection: $249
840K645 Fan Guard (For A/C Builds Only) $209
840L556 Interior Mirror $87
840L557 Exterior Mirrors (Left & Right) $162
840L559 Rear View Wide Angled Mirror (Mounted On Rear Of The Cab) $209
840L560 Fire Extinguisher: 1Kg Abc $87
840L561 External Left Hand Mirror: $87
840L564 Full Radio Kit: $338
840L565 Speaker Kit: Excludes Radio $218
840L567 Sun Blind $76
840L570 Rear Camera $1,759
840L575 White Noise Alarm: T4 $349
840L600 Bushed Kingpost $121
840L601 Refuelling Pump: $688
840L603 Cold Climate Kit: Inc Hd Battery,Grid Heater & Cold Climatefluids/Fuel (T4) $609
840L617 Toolkit & Grease Gun + Cartridge $76
840L618 Grease Gun + Cartridge $24
840L619 Hydraulic Biodegradable Oil: $1,759
840T600 Model Decals Supplied Loosewith Machine: Warning Decals fitted $0
840T601 Wax Protection $178
YELLOW SERIES ATTACHMENTS
YWSMA07 30" GP Bucket $917
YWSMA08 36" GP Bucket $1,019
YWSMA09 48" Grading Bucket $1,280
YWSMA10 Mech. Quick Coupler $1,520
YWSMA11 Auger Drive $2,200
YWSMA12 HM026T Hammer $7,265
YWSMR03 REMOVE 840M662 1 ADDITIONAL SET OF PIVOT PINS FOR 245MM ATTACHMENTS -$108
YWSMR04 REMOVE 840M652 600MM GP BUCKET WITH TEETH: NO PIVOT PINS SUPPLIED: 245MM PIN CENTRES: 45MM PINS -$601
YWSLLLM ADD LIVELINK LITE INCLUDING 24MTHS AIRTIME SUBSCRIPTION $705
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET
ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 48Z
All prices and specifications subject to change without notice page 6 of 6 48Z USD Price Page
2018
JCB COMPACT EXCAVATOR
55Z-1
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
55Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TRACKS
ELECTRICAL
EXCAVATOR
CAB Meets SAE TOPS/FOPS/FOGS requirements, left side entry Cab equipped with fabric suspension
seat and is adjustable forward and aft comes equipped with heater, wiper, front and side opening
windows. 55Z-1 is available as ZTS with zero tailswing for operation in very tight, confining
areas. This design does not compromise serviceability or ergonomics of operator compartment.
Tier 4 Final compliant 48.7 SAE gross hp diesel engine, centrifugal dry type air cleaner. Water
separator, spin-on oil filter, thermostart assist, antifreeze protection to -35 degrees F.
Independent left and right track control. Hydraulic pumps drive integral track motors and
gearbox. Two speed travel 1.8 mph and 2.8 mph.
Rubber (optional steel) grease adjusted. Under carriage rollers 5 per side. Track width 15.75".
Ground pressure 4.7 lbs per square inch. Ground clearance 12inch.
12 volt, with 100 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness
connectors.
Maximum dig depth with standard dipper 12' 7". Servo controls, SAE and ISO patterns both
available on 55Z Compact Excavator with DPC - Dual Pattern Control system. Auxiliary circuit
provides 23.7 GPM for JCB hydraulic breakers and other approved attachments. Dozer control.
Boom swing left 70 degree, right 55 degree. Less excavator bucket. Double Acting Hydraulics
optional fit.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT EXCAVATORS)
All prices and specifications subject to change without notice page 2 of 42 55Z USD Price Page
55Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
YELLOW SERIES PACKAGE BUILD CODE: 8554SALES 55Z-1
CODE ITEM CAB
8554 55Z-1Compact Base Machine $57,644
850A613 Cab With Air Condition (Standard Glass) $6,469
850B600 15.7" (400mm) Rubber Tracks $0
850C615 ISO/SAE Control Pattern: High & Low Flow; Double Acting Aux: T4 (For 4 Way Blade) $3,542
850D603 Fabric Suspension Seat (High Back) $133
850E770 American operator handbook Incl Travel Alarm and Immobilizer $322
850F601 57" (1570mm) Dipper: For High & Low flow Aux $0
850G602 4 Way Dozer Blade: For 57" (400mm) Wide Tracks $3,241
850H627 Dozer Float for Machines without Hydraulic Quick Hitch and 4 way Blade $580
850J604 Halogen Work Lights: 2 Front and 1 Rear (Boom Light Fitted ASSTD) $240
850L612 Bushed Kingpost $129
850L664 Full Radio Kit $361
850M649 Thumb Ready Dipper $258
850M652 24" (610mm) Gp Bucket With Teeth: Nopivot Pins Supplied $640
850M662 1 Additional Set Of Pivot pins. $116
YWSLLME ADD LIVELINK LITE INCLUDING 24MTHS AIRTIME SUBSCRIPTION $705
SUGGESTED LIST PRICE $74,380
Select the following machine PACKAGE BUILD code and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using
the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 42 55Z USD Price Page
55Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8554 55Z-1Compact Base Machine $57,644
OPERATOR'S AREA (E)
850A605 Cab With Air Condition : With JCB Imp Act Protection Glass $8,650
850A613 Cab With Air Condition (Standard Glass) $6,469
850A625 Canopy $2,984
UNDERCARRIAGE (E)
850B600 15.7" (400mm) Rubber Tracks $0
850B601 15.7" (400mm) Steel Tracks $0
850B602 21.7" (550mm) Steel Tracks $1,549
850B603 Bridgestone - 15.7" (400mm) Geogrip $5,727
CONTROLS (E)
850C602 ISO Control Pattern: High Flow; Single Acting Aux: T4 $801
850C603 ISO/SAE Control Pattern: Highflow; Single Acting Aux T4 $1,488
850C606 ISO Control Pattern: High Flow; Double Acting Aux: T4 $1,304
850C607 ISO/SAE Control Pattern: Highflow; Double Acting Aux T4 $1,993
850C610 ISO Control Pattern: High & Low Flow; Double Acting Aux: T4 $2,854
850C611 ISO/SAE Control Pattern: High& Low Flow; Double Acting Auxt4 $3,542
850C614 ISO Control Pattern: High & Low Flow; Double Acting Aux: T4 (For 4 Way Blade) $2,854
850C615 ISO/SAE Control Pattern: High & Low Flow; Double Acting Aux: T4 (For 4 Way Blade) $3,542
SEATS (E)
850D600 Vinyl Suspension Seat (Mid-Back) $0
850D601 Fabric Suspension Seat (Mid-Back) $0
850D602 Vinyl Suspension Seat (High Back) $133
850D603 Fabric Suspension Seat (High Back) $133
850D604 Fabric Air Suspension Heated Seat (High Back) With Headrest $647
OPERATORS HANDBOOK (E)
850E770 American operator handbook Incl Travel Alarm and Immobilizer $322
DIPPER (E)
850F600 57" (1570mm) Dipper: For High Flow Aux $0
850F601 57" (1570mm) Dipper: For High & Low flow Aux $0
DOZER BLADE (E)
850G600 Standard Dozer Blade $0
850G601 Wide Dozer Blade: For 22.6" (550mm) wide Steel Tracks $0
850G602 4 Way Dozer Blade: For 57" (400mm) Wide Tracks $3,241
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 4 of 42 55Z USD Price Page
55Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
850H610 Bucket to Grab Change Over Valve for 62" (1570mm) Dipper $632
850H614 Dozer Float for Machines with Hydraulic Quick Hitch and 2 way Blade $580
850H618 Dozer Float for Machines without Hydraulic Quick Hitch and 2 way Blade $580
850H625 Dozer Float for Machines with Hydraulic Quick Hitch and 4 way Blade $580
850H627 Dozer Float for Machines without Hydraulic Quick Hitch and 4 way Blade $580
BOOM AND DIPPER OPTIONS
850V600 Dozer,Boom & Dipper Hbcv: (For high Flow Aux Without Hyd Quick Hitch) $1,211
850V602 Boom & Dipper Hbcv: (For High flow Aux Without Hyd Quick Hitch) $1,086
850V604 Dozer,Boom & Dipper Hbcv: (For high Flow Aux With Hyd Quick hitch) $1,211
850V606 Boom & Dipper Hbcv: (For Highflow Aux With Hyd Quick Hitch) $1,086
850V608 Dozer,Boom & Dipper Hbcv: (For high & Low Aux Without Hyd Quich Hitch) $1,211
850V610 Boom & Dipper Hbcv: (For High & Low Aux Without Hyd Quick Hitch) $1,086
850V612 Dozer,Boom & Dipper Hbcv: (For high &Low Aux With Hyd Quick hitch) $1,211
850V614 Boom & Dipper Hbcv: (For High & Low Aux With Hyd Quick Hitch) $1,086
OPERATORS COMPARTMENT OPTIONS
850J056 Rotating Beacon $264
850J057 Magnetic Strobe Warning Light Beacon $366
850J074 LiveLink $836
850J603 Media Socket $90
850J604 Halogen Work Lights: 2 Front and 1 Rear (Boom Light Fitted ASSTD) $240
850J605 Led Work Lights: 2 Front, 1 Boom, and 1 Rear $853
850J606 Led Work Lights: 4 Front, 2 Boom, and 1 Rear $1,267
850J607 Halogen Work Lights: 2 Front and 1 Rear (Not for A/C or Fogs Builds) $240
850J609 Led Work Lights: 2 Front and 1 Rear (Not for A/C or Fogs Builds) $1,267
EXCAVATOR & BUCKET OPTIONS
850M649 Thumb Ready Dipper $258
850M650 15.7" (400mm) Gp Bucket With Teeth: Nopivot Pins Supplied $538
850M651 17.7" (450mm) Gp Bucket With Teeth: Nopivot Pins Supplied $568
850M652 24" (610mm) Gp Bucket With Teeth: Nopivot Pins Supplied $640
850M653 35.4" (900mm) Gp Bucket With Teeth: Nopivot Pins Supplied $816
850M654 Grading Bucket: 60" (1500mm) Wide: No Pivot Pins Supplied $896
850M655 Grading Bucket: 47.2" (1200mm) Wide: No Pivot Pins Supplied $655
850M656 Grading Bucket: 70.8" (1800mm) Wide: No Pivot Pins Supplied $896
850M657 29.5" (750mm) Gp Bucket With Teeth: No pivot Pins Supplied $715
850M658 11.8" (300mm) Gp Bucket With Teeth: No pivot Pins Supplied $461
850M659 9.8" (250mm) Gp Bucket With Teeth: No pivot Pins Supplied $461
850M660 31.5" (800mm) Gp Bucket With Teeth: No pivot Pins Supplied $896
850M661 13.7" (350mm) Gp Bucket With Teeth: No pivot Pins Supplied $461
850M662 1 Additional Set Of Pivot pins. $116
850M663 2 Additional Sets Of Pivot pins. $233
850M664 3 Additional Sets Of Pivot pins. $348
850M701 Hydraulic Hitch: For High Flowaux With Hbcv T4 $4,133
850M705 Hydraulic Hitch: For High Flowaux Without HBC T4 $4,133
850M709 Pipework For Hyd Hitch: For High Flow Aux With HBCV T4 $1,291
850M713 Pipework For Hyd Hitch: For High Flow Aux Without Hbcv T4 $1,291
850M717 Hydraulic Hitch: For High &Lowaux With Hbcv T4 $4,133
850M725 Pipe Work for HYD Hitch for High and Low Aux with HBCV T4 $1,291
850M729 Piper Work for HYD Hitch for High and Low Aux Without HBCV T4 $1,291
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 5 of 42 55Z USD Price Page
55Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR QUICK HITCH
850M647 Mechanical Quick Hitch: For Non Hbcv Machines $1,422
850M648 Mechanical Quick Hitch: For Hbcv Machines $1,422
OTHER OPTIONS
850K548 FOGS Guards Kit, Level 1 Operator Protection $223
850K620 2 Front Work Light Guards $116
850K621 4 Front Work Light Guards $233
850K622 Dipper Arm Guard Protection (for machine without HBCV) $266
850K623 Dipper Arm Guard Protection (for machine with HBCV) $266
850K624 Bucket ram Guard Protection $266
850K644 Fan Guard (Heater Builds Only) $223
850K645 Fan Guard (A/C Builds Only) $223
850L575 White Noise Alarm T4 $372
850L616 Refueling pump $733
850L617 Tool Kit (Grease gun and Cartridge) $83
850L618 Grease Gun and Cartridge Kit $28
850L619 Cold Climate Kit: HD Battery, Grid Heater and Cold Climate Fluids/Fuel $649
850L635 Panolin Biodegradable Hydraulic Oil $1,875
850L656 Interior Mirror $90
850L657 Exterior mirror (left and Right) $173
850L659 Rear view wide angled mirror (Mounted on Rear of the Cab) $461
850L660 Fire Extinguisher 1KG ABC Powder $90
850L661 External Left hang Mirror $90
850L664 Full Radio Kit $361
850L665 Speaker Kit (excludes Radio) $233
850L667 Sun Blind $81
850T600 Model Decals Supplied Loose With Machine Warning Decals Fitted $0
850T601 Wax Protection $190
YELLOW SERIES ATTACHMENTS
YWSMA13 30" GP Bucket $917
YWSMA14 36" GP Bucket $1,019
YWSMA15 48" Grading Bucket $1,280
YWSMA16 Mech. Quick Coupler $1,520
YWSMA17 Auger Drive $2,200
YWSMA18 HM026T Hammer $7,265
YWSMR05 REMOVE 850M662 1 ADDITIONAL SET OF PIVOT PINS FOR 245MM ATTACHMENTS -$116
YWSMR06 REMOVE 850M652 600MM GP BUCKET WITH TEETH: NO PIVOT PINS SUPPLIED: 245MM PI N CENTRES: 45MM PINS -$640
YWSLLME ADD LIVELINK LITE INCLUDING 24MTHS AIRTIME SUBSCRIPTION $705
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8055
All prices and specifications subject to change without notice page 6 of 42 55Z USD Price Page
2018
JCB COMPACT EXCAVATOR
57C-1
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
57C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TRACKS
ELECTRICAL
EXCAVATOR
CAB Meets SAE TOPS/FOPS/FOGS requirements, left side entry Cab equipped with fabric suspension
seat and is adjustable forward and aft comes equipped with heater, wiper, front and side opening
windows. 57C-1 is available as CTS with minimal tailswing for operation in very tight, confining
areas. This design does not compromise serviceability or ergonomics of operator compartment.
Tier 4 Final compliant 48.7 SAE gross hp diesel engine, centrifugal dry type air cleaner. Water
separator, spin-on oil filter, thermostart assist, antifreeze protection to -35 degrees F.
Independent left and right track control. Hydraulic pumps drive integral track motors and
gearbox. Two speed travel 1.8 mph and 2.8 mph.
Rubber (optional steel) grease adjusted. Under carriage rollers 5 per side. Track width 15.75".
Ground pressure 4.7 lbs per square inch. Ground clearance 12in.
12 volt, with 100 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness
connectors.
Maximum dig depth with standard dipper 13' 4". Servo controls, SAE and ISO patterns both
available on 57C Compact Excavator with DPC - Dual Pattern Control system. Auxiliary circuit
provides 23.7 GPM for JCB hydraulic breakers and other approved attachments. Dozer control.
Boom swing left 70 degree, right 55 degree. Less excavator bucket. Double Acting Hydraulics
optional fit.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT EXCAVATORS)
All prices and specifications subject to change without notice page 8 of 42 55Z USD Price Page
57C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8574 57C-1 Compact Base Machine $59,151
OPERATOR'S AREA (E)
850A603 Cab With Heater & JCB Impact Protection Glass $6,363
850A607 Cab With Air Condition : With JCB Imp Act Protection Glass $8,650
850A615 Cab With Air Condition (Standard Glass) $6,469
UNDERCARRIAGE (E)
850B600 15.7" (400mm) Rubber Tracks $0
850B601 15.7" (400mm) Steel Tracks $0
850B602 21.7" (550mm) Steel Tracks $1,549
850B603 Bridgestone - 15.7" (400mm) Geogrip $5,727
CONTROLS (E)
850C602 ISO Control Pattern: High Flow; Single Acting Aux: T4 $801
850C603 ISO/SAE Control Pattern: Highflow; Single Acting Aux T4 $1,488
850C606 ISO Control Pattern: High Flow; Double Acting Aux: T4 $1,304
850C607 ISO/SAE Control Pattern: Highflow; Double Acting Aux T4 $1,993
850C610 ISO Control Pattern: High & Low Flow; Double Acting Aux: T4 $2,854
850C611 ISO/SAE Control Pattern: High& Low Flow; Double Acting Auxt4 $3,542
850C614 ISO Control Pattern: High & Low Flow; Double Acting Aux: T4 (For 4 Way Blade) $2,854
850C615 ISO/SAE Control Pattern: High & Low Flow; Double Acting Aux: T4 (For 4 Way Blade) $3,542
SEATS (E)
850D602 Vinyl Suspension Seat (High Back) $133
850D603 Fabric Suspension Seat (High Back) $133
850D604 Fabric Air Suspension Heated Seat (High Back) With Headrest $647
OPERATORS HANDBOOK (E)
850E770 American operator handbook Incl Travel Alarm and Immobilizer $322
DIPPER (E)
850F602 72" (1820mm) Dipper: For High Flow Aux $0
850F603 72" (1820mm) Dipper: For High & Low Flow Aux $0
DOZER BLADE (E)
850G603 4 Way Dozer Blade: For 57" (400mm) Wide Tracks $3,241
850G605 Standard Dozer Blade For 57" (400mm) Wide Tracks $0
850G606 Wide Dozer Blade: For 22.6" (550mm) wide Steel Tracks $0
Please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from
Section 2 or 3.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 9 of 42 55Z USD Price Page
55Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 2 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
850H611 Bucket to Grab Change Over Valve for 72" (1820mm) Dipper $632
850H619 Dozer Float for Machines with Hydraulic Quick Hitch and 2 way Blade $580
850H621 Dozer Float for Machines without Hydraulic Quick Hitch and 2 way Blade $580
850H622 Dozer Float for Machines with Hydraulic Quick Hitch and 4 way Blade $580
850H623 Dozer Float for Machines without Hydraulic Quick Hitch and 4 way Blade $580
BOOM AND DIPPER OPTIONS
850V601 Dozer,Boom & Dipper Hbcv: (For high Flow Aux Without Hyd Quick Hitch) $1,211
850V603 Boom & Dipper Hbcv: (For High flow Aux Without Hyd Quick Hitch) $1,086
850V605 Dozer,Boom & Dipper Hbcv: (For high Flow Aux With Hyd Quick hitch) $1,211
850V607 Boom & Dipper Hbcv: (For Highflow Aux With Hyd Quick Hitch) $1,086
850V609 Dozer,Boom & Dipper Hbcv: (For high & Low Aux Without Hyd Quich Hitch) $1,211
850V611 Boom & Dipper Hbcv: (For High & Low Aux Without Hyd Quick Hitch) $1,086
850V613 Dozer,Boom & Dipper Hbcv: (For high &Low Aux With Hyd Quick hitch) $1,211
850V615 Boom & Dipper Hbcv: (For High & Low Aux With Hyd Quick Hitch) $1,086
OPERATORS COMPARTMENT OPTIONS
850J056 Rotating Beacon $264
850J057 Magnetic Strobe Warning Light Beacon $366
850J074 LiveLink $836
850J603 Media Socket $90
850J604 Halogen Work Lights: 2 Front and 1 Rear (Boom Light Fitted ASSTD) $240
850J605 Led Work Lights: 2 Front, 1 Boom, and 1 Rear $853
850J606 Led Work Lights: 4 Front, 2 Boom, and 1 Rear $1,267
850J607 Halogen Work Lights: 2 Front and 1 Rear (Not for A/C or Fogs Builds) $240
850J609 Led Work Lights: 2 Front and 1 Rear (Not for A/C or Fogs Builds) $1,267
EXCAVATOR & BUCKET OPTIONS
850M649 Thumb Ready Dipper $258
850M650 15.7" (400mm) Gp Bucket With Teeth: Nopivot Pins Supplied $538
850M651 17.7" (450mm) Gp Bucket With Teeth: Nopivot Pins Supplied $568
850M652 24" (610mm) Gp Bucket With Teeth: Nopivot Pins Supplied $640
850M653 35.4" (900mm) Gp Bucket With Teeth: Nopivot Pins Supplied $816
850M654 Grading Bucket: 60" (1500mm) Wide: No Pivot Pins Supplied $896
850M655 Grading Bucket: 47.2" (1200mm) Wide: No Pivot Pins Supplied $655
850M656 Grading Bucket: 70.8" (1800mm) Wide: No Pivot Pins Supplied $896
850M657 29.5" (750mm) Gp Bucket With Teeth: No pivot Pins Supplied $715
850M658 11.8" (300mm) Gp Bucket With Teeth: No pivot Pins Supplied $461
850M659 9.8" (250mm) Gp Bucket With Teeth: No pivot Pins Supplied $461
850M660 31.5" (800mm) Gp Bucket With Teeth: No pivot Pins Supplied $896
850M661 13.7" (350mm) Gp Bucket With Teeth: No pivot Pins Supplied $461
850M662 1 Additional Set Of Pivot pins. $116
850M663 2 Additional Sets Of Pivot pins. $233
850M664 3 Additional Sets Of Pivot pins. $348
850M703 Hydralic Hitch: For High Flow Aux With HBCV T4 $4,133
850M707 Hydralic Hitch: For High Flow Aux Without HBCV T4 $4,133
850M711 Pipework For Hidraulic Hitch: For High Flow Auxwith HBCT4 $4,133
850M715 Pipework For HYD Hitch, For High flow Aux Without BCV T4 $1,291
850M719 Hydraulic Hitch: For Hight & Low Aux with HBCV T4 $4,133
850M723 Hydraulic Hitch: For Hight & Low Aux with HBCV T4 $4,133
850M727 Pipe Work for HYD Hitch for High and Low Aux with HBCV T4 $1,291
850M731 Pipe Work for HYD Hitch for High and Low Aux without HBCV T4 $1,291
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
All prices and specifications subject to change without notice page 10 of 42 55Z USD Price Page
55Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 2 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR QUICK HITCH
850M647 Mechanical Quick Hitch: For Non Hbcv Machines $1,422
850M648 Mechanical Quick Hitch: For Hbcv Machines $1,422
OTHER OPTIONS
850K548 FOGS Guards Kit, Level 1 Operator Protection $223
850K620 2 Front Work Light Guards $116
850K621 4 Front Work Light Guards $233
850K622 Dipper Arm Guard Protection (for machine without HBCV) $266
850K623 Dipper Arm Guard Protection (for machine with HBCV) $266
850K624 Bucket ram Guard Protection $266
850K644 Fan Guard (Heater Builds Only) $223
850K645 Fan Guard (A/C Builds Only) $223
850L575 White Noise Alarm T4 $372
850L612 Bushed Kingpost $129
850L616 Refueling pump $733
850L617 Tool Kit (Grease gun and Cartridge) $83
850L618 Grease Gun and Cartridge Kit $28
850L619 Cold Climate Kit: HD Battery, Grid Heater and Cold Climate Fluids/Fuel $649
850L635 Panolin Biodegradable Hydraulic Oil $1,875
850L656 Interior Mirror $90
850L657 Exterior mirror (left and Right) $173
850L659 Rear view wide angled mirror (Mounted on Rear of the Cab) $461
850L660 Fire Extinguisher 1KG ABC Powder $90
850L661 External Left hang Mirror $90
850L666 Full Radio Kit $361
850L667 Sun Blind $81
850L669 Speaker Kit (excludes Radio) $233
850T601 Wax Protection $190
850T604 Model Decals Supplied Loose With Machine Warning Decals Fitted $0
SECTION 3 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 57C
All prices and specifications subject to change without notice page 11 of 42 55Z USD Price Page
2018
JCB COMPACT EXCAVATOR
67C-1
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 12 of 42 85Z USD Price Page
67C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT
ENGINE
TRANSMISSION
TRACKS
ELECTRICAL
EXCAVATOR
CAB Meets SAE ROPS/TOPS/FOGS requirements with JCB Impact Protection front screen, left side
entry Cab equipped with fabric suspension seat, tilting cab, Intermittent wiper with wash/wipe, Roof
mounted worklights, 3 speed heater/demister with 9 adjustable air vents, Color LCD display, Digital
clock, 12v accessory socket, Interior light, Full audio/visual warning systems, Radio ready kit, Auto
idle throttle, Below idle system, 2 digging modes (Eco & Heavy), ISO servo controls with electro-
hydraulic dozer lever, Electro-proportional thumb controlled high flow double acting auxiliary, 10
selectable auxiliary flow rates, , Full control isolation, “2 go” hydraulic isolation, Highback suspension
seat, 100% steel bodywork.
JCB by Kohler Tier IV Final KDI 1903 - 51.5 SAE net hp (55). Common rail, 4-valve head,
turbocharger, electronic cooled EGR, turbocharger, oil control system and diesel-oxygenated
catalyst (DOC).
Independent left and right track control. Hydraulic pumps drive integral track motors and gearbox.
Two speed travel 1.6 mph and 2.9 mph with Auto-kickdown track motors.
Rubber (optional steel) grease adjusted. Under carriage rollers 5 per side. Track width 16".
Ground pressure 6.0 lbs per square inch. Ground clearance 9.0".
12 volt, with 80 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness
connectors.
Maximum dig depth with standard 6'7" dipper 13' 4", Bushed swing bracket with 500 hour dig end
greasing intervals. Servo controls, SAE and ISO patterns both available on 67C-1 Compact
Excavator with DPC - Dual Pattern Control system. Auxiliary circuit provides 23.8 GPM for JCB
hydraulic breakers and other approved attachments. Dozer control. Boom swing left 60 degree,
right 60 degree. Less excavator bucket. Double Acting Hydraulics optional fit
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDER
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 13 of 42 85Z USD Price Page
67C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8671 67C-1 Compact Excavator Base Machine (55 hp gross, Kohler Diesel 4 cylinder Engine) $75,727
OPERATOR'S AREA (E)
850A173 $0
850A174 $3,186
850A195 $2,996
UNDERCARRIAGE (E)
850B521 Rubber Tracks 16" (405mm) wide $0
850B534 Steel Tracks 16" (405mm) wide $2,035
850B535 Steel Tracks 21.7" (551mm) wide $2,590
850B536 Bridgestone GeoGrip Rubber Tracks 16" (405mm) wide $8,021
CONTROLS (E)
850C175 $2,115
850C176 $3,499
850C177 $3,499
SEATS (E)
850D309 Vinyl Suspension Seat $0
850D310 Fabric Suspension Seat $0
850D311 Vinyl Suspension Seat (High Back) $337
850D312 Fabric Suspension Seat (High Back) $337
850D313 Fabric Air Suspension heated Seat (High back) with headrest $693
OPERATORS HANDBOOK (E)
850E323 American operator handbook $0
DIPPER (E)
850F215 Standard dipper (with spacer ram) for High Flow Auxiliary 79" (2000mm) $0
850F216 Standard dipper (with spacer ram) for High & Low Flow Auxiliary 79" (2000mm) $0
850F217 Standard dipper (with spacer ram) for High Flow Auxiliary 65" (1650mm) $0
850F218 Standard dipper (with spacer ram) for High & Low Flow Auxiliary 65" (1650mm) $0
DOZER BLADE (E)
850G102 Standard Dozer Blade 79" (2020mm) $0
850G103 4 Way Dozer 79" (2020mm)(850C177 Required) $3,287
Cab with heater TOPS/FOPS/FOGS certified, fully glazed, with front windshild and wiper
Cab TOPS/FOPS/FOGS certified, fully glazed, with heater air conditioning - Laminated glass
Cab with heater and A/C TOPS?FOPS/FOGS certified fullly glazed, with toughened glass and wiper
Dual Pattern Control System - ISO to SAE - High Flow proportional auxiliary - Double acting hydraulic circuit controlled
via right hand joystick
ISO Pattern Control - Hight & Low Flow proportional auxiliary - Double acting circuit controlled via both joysticks
Dual Pattern Control System - ISO to SAE - High & Low Flow proportional auxiliary - Double acting hydraulic circuit
controlled via both joysticks
Please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 2 or 3.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 14 of 42 85Z USD Price Page
67C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 2 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATORS COMPARTMENT OPTIONS **
850J054 Key Immobilizer $569
850J055 Pin Pad Immobilizer $569
850J056 Rotating Beacon $264
850J057 Magnetic Strobe Warning Light Beacon $366
850J071 LiveLink $897
850J129 Two LED Front Work Lights & One LED Rear Worklight $677
850K549 FOGS Guard Kit - Level 1 $895
850L545 Hydraulic biodegradable oil $1,844
850L556 Interior Mirror $97
850L557 Exterior mirror (left hand) $180
850L559 Rear view wide angled mirror $177
850L560 Fire Extinguisher 1KG ABC Powder $114
850L561 Exterior mirror (left hand) $104
850L568 Travel alarm $535
850L570 Rear Camera $1,377
850L617 Tool Kit (Grease gun and Cartridge) $83
850L618 Grease Gun and Cartridge Kit $28
EXCAVATOR & BUCKET OPTIONS
850M115 18" (460mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,194
850M116 24" (600mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,364
850M117 32" (800mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,533
850M198 Thumb Ready Dipper for 65" Dipper only $271
850M199 Thumb Ready Dipper Not for 65" Dipper $271
850M203 16" (405mm) Standard Duty - 3.0 cu-ft capacity heaped $936
850M204 18" (460mm) Standard Duty - 3.6 cu-ft capacity heaped $983
850M205 24" (610mm) Standard Duty - 5.2 cu-ft capacity heaped $1,069
850M206 36" (915mm) Standard Bucket - 8.8 cu-ft capacity heaped $1,283
850M207 60" (1525mm) Grading Bucket - 7.7 cu-ft capacity heaped $1,083
850M208 32" (800mm) Bucket: For 1.5" (45mm) Bucket Pins $1,382
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 15 of 42 85Z USD Price Page
67C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 2 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR QUICK HITCH
850M270 Mechanical Quickhitch for HBCV Build $1,747
850M271 Mechanical Quick Hitch for dipper mounted attachments (pin set not included) $1,807
850M273 12" (300mm) Heavy Duty Ribbed Bucket: For 1.5" (45mm) Bucket Pins $1,022
850M211 Pivot Pins Kit for use with Quick Hitch (1 additional set) $142
850M212 Pivot Pins Kit for use with Quick Hitch (2 additional sets) $287
850M213 Pivot Pins Kit for use with Quick Hitch (3 additional sets) $430
850M300 Hydraulic Quick Hitch for 79" (2000mm) dipper $4,070
850M301 Hydraulic Quick Hitch for 65"" (1650mm) dipper $4,070
850M302 Hydraulic Quick Hitch for 79" (2000mm) dipper (850M314 Required) $4,152
850M303 Hydraulic Quick Hitch for 65" (1650mm) dipper (850M315 Required) $4,152
850M314 Pipework for Hydraulic Quick Hitch for 79" (2000mm) dipper (Excludes Hitch) $1,414
850M315 Pipework for Hydraulic Quick Hitch for 65" (1650mm) dipper (Excludes Hitch) $1,414
BOOM AND DIPPER OPTIONS
850V126 HBCV Boom, Dipper and Dozer for 89" (2000mm) Dipper $3,510
850V127 HBCV Boom and Dipper for 89" (2000mm) Dipper $2,968
850V128 HBCV Boom, Dipper and Dozer for 65" (1650mm) Dipper $3,510
850V129 HBCV Boom and Dipper for 65" (1650mm) Dipper $2,968
SECTION 3 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 67C-1
All prices and specifications subject to change without notice page 16 of 42 85Z USD Price Page
2018
JCB COMPACT EXCAVATOR
85Z-1
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 17 of 42 85Z USD Price Page
85Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS
TRACKS
ELECTRICAL
EXCAVATOR
OPERATORS AREA Meets SAE ROPS/TOPS/FOGS requirements with JCB Impact Protection front screen, left side
entry Cab equipped with fabric suspension seat, tilting cab, Intermittent wiper with wash/wipe, Roof
mounted worklights, 3 speed heater/demister with 9 adjustable air vents, Color LCD display, Digital
clock, 12v accessory socket, Interior light, Full audio/visual warning systems, Radio ready kit, Auto
idle throttle, Below idle system, 2 digging modes (Eco & Heavy), ISO servo controls with electro-
hydraulic dozer lever, Electro-proportional thumb controlled high flow double acting auxiliary, 10
selectable auxiliary flow rates, , Full control isolation, “2 go” hydraulic isolation, Highback
suspension seat, 100% steel bodywork.
JCB by Kohler Tier IV Final KDI 2504 - 60.8 SAE net hp (64.4). Common rail, 4-valve head,
turbocharger, electronic cooled EGR, turbocharger, oil control system and diesel-oxygenated
catalyst (DOC).
A premium closed center pump and valve provides improved flow sharing for smooth, precise and
balanced operation during multifunctioning. One variable displacement axial-type pump yields 41.8
gpm. Independent left and right track control. Hydraulic pumps drive integral track motors and
gearbox.
Rubber (optional steel) grease adjusted. Under carriage provides (1) upper and (5) lower rollers
per side. Track width 18". Ground pressure 5.97 lbs per square inch. Ground clearance 14". Two
speed travel 1.6 mph and 3.1 mph.
12 volt, with 80 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness
connectors.
Maximum dig depth with standard 6' 7" dipper 11' 11", Bushed swing bracket with 500 hour dig end
greasing intervals. Servo controls, SAE and ISO patterns both available on 85Z-1 Compact
Excavator with DPC - Dual Pattern Control system. Auxiliary circuit provides 26.4 GPM for JCB
hydraulic breakers and other approved attachments. Dozer control. Boom swing left 5 degree,
right 60 degree. Less excavator bucket. Double Acting Hydraulics optional fit
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT EXCAVATORS)
All prices and specifications subject to change without notice page 18 of 42 85Z USD Price Page
85Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 8588ASALES 85Z-1
CODE ITEM CAB
8588
850A191
850B555
850C318
850D312
850E268
850F314
850G306
850H524
850J058
850L554
850M199
850M205
YWSLLME
SUGGESTED LIST PRICE $105,593
Travel alarm
Thumb Ready Dipper Not for 65" Dipper
24" (610mm) Standard Duty - 5.2 cu-ft capacity heaped
ADD LIVELINK LITE INCLUDING 24MTHS AIRTIME SUBSCRIPTION
American operator handbook
Standard Dipper for High & Low Flow Auxiliary 83" (2100mm)
Standard Dozer Blade 91" (2320mm) *For use with 18" (450mm) Tracks Only
Dozer Float System
Radio Kit (Includes Speakers)
Dual Pattern Control System - ISO to SAE - High & Low Flow proportional auxiliary - Double acting hydraulic circuit controlled via
both joysticks
85Z-1 Compact Excavator Base Machine (64.4 hp gross, Kohler Diesel 4 cylinder Engine)
Cab with heater and A/C TOPS?FOPS/FOGS certified fullly glazed, with toughened glass and wiper
Rubber Tracks 18" (460mm) wide
Fabric Suspension Seat (High Back)
Select the following machine PACKAGE BUILD code and ATTACHMENTS as required from Section 4. Package Build
configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using
the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 19 of 42 85Z USD Price Page
85Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8588 85Z-1 Compact Excavator Base Machine (64.4 hp gross, Kohler Diesel 4 cylinder Engine) $92,418
OPERATOR'S AREA (E)
850A167 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater with JCB impact protection glass $3,417
850A168 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning $5,120
850A190 Cab with heater TOPS/FOPS/FOGS certified, fully glazed, with toughened glass and wiper $3,225
850A191 Cab with heater and A/C TOPS?FOPS/FOGS certified fullly glazed, with toughened glass and wiper $4,893
UNDERCARRIAGE (E)
850B555 Rubber Tracks 18" (460mm) wide $0
850B556 Steel Tracks 18" (450mm) wide $897
850B557 Bridgestone Geogrip Rubber Tracks 18" (450mm) wide $8,687
850B558 Steel Tracks 24" (600mm) wide $1,091
CONTROLS (E)
850C316 $2,114
850C318 $3,499
SEATS (E)
850D309 Vinyl Suspension Seat $0
850D310 Fabric Suspension Seat $0
850D311 Vinyl Suspension Seat (High Back) $337
850D312 Fabric Suspension Seat (High Back) $337
850D313 Fabric Air Suspension heated Seat (High back) with headrest $693
OPERATORS HANDBOOK (E)
850E268 American operator handbook $0
DIPPER (E)
850F309 Standard Dipper for High Flow Auxiliary 79" (2000mm) $1,026
850F313 Standard Dipper for High & Low Flow Auxiliary 79" (2000mm) $1,026
850F314 Standard Dipper for High & Low Flow Auxiliary 83" (2100mm) $1,026
850F351 Standard Dipper for High Flow Auxiliary 83" (2100mm) $1,026
DOZER BLADE (E)
850G306 Standard Dozer Blade 91" (2320mm) *For use with 18" (450mm) Tracks Only $0
850G308 4 Way Dozer (850C318 Required) $3,286
850G309 Standard Dozer Blade 97" (2470mm)(850B558 Required) $512
850H524 Dozer Float System $623
Dual Pattern Control System - ISO to SAE - High Flow proportional auxiliary - Double acting hydraulic circuit controlled
via right hand joystick
Dual Pattern Control System - ISO to SAE - High & Low Flow proportional auxiliary - Double acting hydraulic circuit
controlled via both joysticks
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 20 of 42 85Z USD Price Page
85Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATORS COMPARTMENT OPTIONS **
850J054 Key Immobilizer $569
850J055 Pin Pad Immobilizer $569
850J056 Rotating Beacon $264
850J057 Magnetic Strobe Warning Light Beacon $366
850J058 Radio Kit (Includes Speakers) $222
850J061 Two LED Front Work Lights & One LED Rear Worklight $1,046
850J065 110V Block Heater $263
850J066 230V Block Heater $263
850J071 LiveLink $897
850K524 FOGS Guard kit - Level 1 $894
850K525 FOGS Guard kit - Level 2 $1,159
850K526 Front Screen Guard (course) $1,637
850K527 Front Screen Guard (fine) $1,610
850K528 Bucket ram Guard Protection $157
850K531 Chaff Guard (For Air Condition Builds) $623
850K533 Chaff Guard (For Heater Builds) $623
850K535 Chaff and Fan Guard (For Air Condition Builds) $897
850K537 Chaff and Fan Guard (For Heater Builds) $897
850K539 Dipper Ram Guard Protection $285
850L545 Hydraulic biodegradable oil $1,844
850L548 USA parts book $92
850L552 Refueling pump $669
850L553 Fire Extinguisher 1KG ABC Powder $156
850L554 Travel alarm $531
850L557 Exterior mirror (left hand) $180
850L559 Rear view wide angled mirror $177
850L570 Rear Camera $1,377
850L617 Tool Kit (Grease gun and Cartridge) $83
850L618 Grease Gun and Cartridge Kit $28
850T005 Model Decals Supplied Loose With Machine Warning Decals Fitted $0
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 21 of 42 85Z USD Price Page
85Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR & BUCKET OPTIONS
850V100 HBCV Boom, Dipper & Dozer $3,580
850H522 Grab Bucket Changeover Valve (For 83" 2100mm Dipper) $667
850M273 12" (300mm) Heavy Duty Ribbed Bucket: For 1.5" (45mm) Bucket Pins $1,022
850M115 18" (460mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,194
850M116 24" (600mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,364
850M117 32" (800mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,533
850M198 Thumb Ready Dipper for 65" Dipper only $271
850M199 Thumb Ready Dipper Not for 65" Dipper $271
850M203 16" (405mm) Standard Duty - 3.0 cu-ft capacity heaped $936
850M204 18" (460mm) Standard Duty - 3.6 cu-ft capacity heaped $983
850M205 24" (610mm) Standard Duty - 5.2 cu-ft capacity heaped $1,069
850M206 36" (915mm) Standard Bucket - 8.8 cu-ft capacity heaped $1,283
850M207 60" (1525mm) Grading Bucket - 7.7 cu-ft capacity heaped $1,083
850M208 32" (800mm) Bucket: For 1.5" (45mm) Bucket Pins $1,382
850M280 Pipework For Hydraulic Hitch (For 65" (1650mm) Dipper & HBCV Builds (Excludes Hydraulic Hitch)) $1,412
850M281 Pipework For Hydraulic Hitch (For 79" (2000mm) Dipper & HBCV Builds (Excludes Hydraulic Hitch)) $1,412
850M282 Pipework For Hydraulic Hitch (For 83" (2100mm) Dipper & HBCV Builds (Excludes Hydraulic Hitch)) $1,412
850M283 Pipework For Hydraulic Hitch (For 65" (1650mm) Dipper (Not For HBCV) Excludes Hydraulic Hitch) $1,412
850M284 Pipework for Hydraulic Quick Hitch for 79" (2000mm) dipper (Excludes Hitch) $1,413
850M285 Pipework for Hydraulic Quick Hitch for 83" (2100mm) dipper (Excludes Hitch) $1,413
EXCAVATOR QUICK HITCH
850M270 Mechanical Quickhitch for HBCV Build $1,747
850M271 Mechanical Quick Hitch for dipper mounted attachments (pin set not included) $1,807
850M211 Pivot Pins Kit for use with Quick Hitch (1 additional set) $142
850M212 Pivot Pins Kit for use with Quick Hitch (2 additional sets) $287
850M213 Pivot Pins Kit for use with Quick Hitch (3 additional sets) $430
850M214 Hydrualic Quick Hitch (For 65" (1650mm) Dipper and HBCV Builds) $4,151
850M215 Hydrualic Quick Hitch (For 79" (2000mm) Dipper and HBCV Builds) $4,151
850M216 Hydrualic Quick Hitch (For 83" (2100mm) Dipper and HBCV Builds) $4,151
850M258 Hydrualic Quick Hitch (For 65" (1650mm) Dipper Without HBCV Builds) $4,151
850M259 Hydraulic Quick Hitch for 89" (2000mm) Dipper (850M284 Required) $4,152
850M260 Hydraulic Quick Hitch for 83" (2100mm) Dipper (850M285 Required) $4,152
YELLOW SERIES
YWSMA19 Mechanical Quick Coupler $905
YWSMA20 32" GP Bucket $925
YWSMA21 24" Heavy Duty Bucket $1,030
YWSMA22 60" Grading Bucket $1,166
YWSMA23 HM033T Hammer $7,568
YWSMR07 REMOVE 850M205 24" (600MM) GP BUCKET WITH TEETH -$1,069
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 85Z-1
All prices and specifications subject to change without notice page 22 of 42 85Z USD Price Page
2018
JCB COMPACT EXCAVATOR
86C-1
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 23 of 42 85Z USD Price Page
86C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS
TRACKS
ELECTRICAL
EXCAVATOR
OPERATORS AREA Meets SAE ROPS/TOPS/FOGS requirements with JCB Impact Protection front screen, left side
entry Cab equipped with fabric suspension seat, tilting cab, Intermittent wiper with wash/wipe, Roof
mounted worklights, 3 speed heater/demister with 9 adjustable air vents, Color LCD display, Digital
clock, 12v accessory socket, Interior light, Full audio/visual warning systems, Radio ready kit, Auto
idle throttle, Below idle system, 2 digging modes (Eco & Heavy), ISO servo controls with electro-
hydraulic dozer lever, Electro-proportional thumb controlled high flow double acting auxiliary, 10
selectable auxiliary flow rates, , Full control isolation, “2 go” hydraulic isolation, Highback
suspension seat, 100% steel bodywork.
JCB by Kohler Tier IV Final KDI 2504 - 60.8 SAE net hp (64.4). Common rail, 4-valve head,
turbocharger, electronic cooled EGR, turbocharger, oil control system and diesel-oxygenated
catalyst (DOC).
A premium closed center pump and valve provides improved flow sharing for smooth, precise and
balanced operation during multifunctioning. One variable displacement axial-type pump yields 41.8
gpm. Independent left and right track control. Hydraulic pumps drive integral track motors and
gearbox.
Rubber (optional steel) grease adjusted. Under carriage provides (1) upper and (5) lower rollers
per side. Track width 18". Ground pressure 5.97 lbs per square inch. Ground clearance 14". Two
speed travel 1.6 mph and 3.1 mph.
12 volt, with 80 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness
connectors.
Maximum dig depth with standard 6' 11" dipper 14' 4", Bushed swing bracket with 500 hour dig end
greasing intervals. Servo controls, SAE and ISO patterns both available on 86C-1 Compact
Excavator with DPC - Dual Pattern Control system. Auxiliary circuit provides 26.4 GPM for JCB
hydraulic breakers and other approved attachments. Dozer control. Boom swing left 5 degree,
right 60 degree. Less excavator bucket. Double Acting Hydraulics optional fit
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT EXCAVATORS)
All prices and specifications subject to change without notice page 24 of 42 85Z USD Price Page
86C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8688 86C-1 Compact Excavator Base Machine (64.4 hp gross, Kohler Diesel 4 cylinder Engine) $92,418
OPERATOR'S AREA (E)
850A167 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater with JCB impact protection glass $3,417
850A168 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning $5,120
850A190 Cab with heater TOPS/FOPS/FOGS certified, fully glazed, with toughened glass and wiper $3,225
850A191 Cab with heater and A/C TOPS?FOPS/FOGS certified fullly glazed, with toughened glass and wiper $4,893
UNDERCARRIAGE (E)
850B555 Rubber Tracks 18" (460mm) wide $0
850B556 Steel Tracks 18" (450mm) wide $897
850B557 Bridgestone Geogrip Rubber Tracks 18" (450mm) wide $8,687
850B558 Steel Tracks 24" (600mm) wide $1,091
CONTROLS (E)
850C316 $2,114
850C318 $3,499
SEATS (E)
850D309 Vinyl Suspension Seat $0
850D310 Fabric Suspension Seat $0
850D311 Vinyl Suspension Seat (High Back) $337
850D312 Fabric Suspension Seat (High Back) $337
850D313 Fabric Air Suspension heated Seat (High back) with headrest $693
OPERATORS HANDBOOK (E)
850E295 American operator handbook $0
DIPPER (E)
850F324 Standard Dipper for High Flow Auxiliary 83" (2100mm) $1,026
850F332 Standard dipper for High & Low Flow Auxiliary 83" (2100mm) $1,026
850F326 Standard dipper for High Flow Auxiliary 89" (2250mm) $1,026
850F334 Standard Dipper for High & Low Flow Auxiliary 89" (2250mm) $1,026
DOZER BLADE (E)
850G306 Standard Dozer Blade 91" (2320mm) *For use with 18" (450mm) Tracks Only $0
850G308 4 Way Dozer (850C318 Required) $3,286
850G309 Standard Dozer Blade 97" (2470mm)(850B558 Required) $512
850H524 Dozer Float System $623
Dual Pattern Control System - ISO to SAE - High Flow proportional auxiliary - Double acting hydraulic
circuit controlled via right hand joystick
Dual Pattern Control System - ISO to SAE - High & Low Flow proportional auxiliary - Double acting
hydraulic circuit controlled via both joysticks
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
All prices and specifications subject to change without notice page 25 of 42 85Z USD Price Page
86C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATORS COMPARTMENT OPTIONS **
850J054 Key Immobilizer $569
850J055 Pin Pad Immobilizer $569
850J056 Rotating Beacon $264
850J057 Magnetic Strobe Warning Light Beacon $366
850J058 Radio Kit (Includes Speakers) $222
850J061 Two LED Front Work Lights & One LED Rear Worklight $1,046
850J065 110V Block Heater $263
850J066 230V Block Heater $263
850J071 LiveLink $897
850K524 FOGS Guard kit - Level 1 $894
850K525 FOGS Guard kit - Level 2 $1,159
850K526 Front Screen Guard (course) $1,637
850K527 Front Screen Guard (fine) $1,610
850K528 Bucket ram Guard Protection $157
850K530 Fan Guard (Air Condition Builds Only) $286
850K532 Chaff Guard (For Air Condition Builds) $623
850K534 Chaff Guard (For Heater Builds) $623
850K536 Chaff and Fan Guard (For Air Condition Builds) $897
850K538 Chaff and Fan Guard (For Heater Builds) $897
850K540 Dipper Ram Guard Protection $285
850L545 Hydraulic biodegradable oil $1,844
850L548 USA parts book $92
850L552 Refueling pump $669
850L553 Fire Extinguisher 1KG ABC Powder $156
850L554 Travel alarm $531
850L557 Exterior mirror (left hand) $180
850L559 Rear view wide angled mirror $177
850L570 Rear Camera $1,377
850L617 Tool Kit (Grease gun and Cartridge) $83
850L618 Grease Gun and Cartridge Kit $28
850T007 Model Decals Supplied Loose With Machine Warning Decals Fitted $0
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 26 of 42 85Z USD Price Page
86C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR & BUCKET OPTIONS
850V101 HBCV Boom, Dipper & Dozer $3,580
850V108 HBCV Boom & Dipper Kit (Excludes Dozer HBCV) $3,027
850H522 Grab Bucket Changeover Valve (For 83" 2100mm Dipper) $667
850M273 12" (300mm) Heavy Duty Ribbed Bucket: For 1.5" (45mm) Bucket Pins $1,022
850M115 18" (460mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,194
850M116 24" (600mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,364
850M117 32" (800mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,533
850M198 Thumb Ready Dipper for 65" Dipper only $271
850M199 Thumb Ready Dipper Not for 65" Dipper $271
850M203 16" (405mm) Standard Duty - 3.0 cu-ft capacity heaped $936
850M204 18" (460mm) Standard Duty - 3.6 cu-ft capacity heaped $983
850M205 24" (610mm) Standard Duty - 5.2 cu-ft capacity heaped $1,069
850M206 36" (915mm) Standard Bucket - 8.8 cu-ft capacity heaped $1,283
850M207 60" (1525mm) Grading Bucket - 7.7 cu-ft capacity heaped $1,083
850M208 32" (800mm) Bucket: For 1.5" (45mm) Bucket Pins $1,382
EXCAVATOR QUICK HITCH
850M270 Mechanical Quickhitch for HBCV Build $1,747
850M271 Mechanical Quick Hitch for dipper mounted attachments (pin set not included) $1,807
850M211 Pivot Pins Kit for use with Quick Hitch (1 additional set) $142
850M212 Pivot Pins Kit for use with Quick Hitch (2 additional sets) $287
850M213 Pivot Pins Kit for use with Quick Hitch (3 additional sets) $430
850M245 Hydrualic Quick Hitch (For 65" (1650mm) Dipper and HBCV Builds) $4,151
850M247 Hydrualic Quick Hitch (For 83" (2100mm) Dipper and HBCV Builds) $4,151
850M248 Hydrualic Quick Hitch (For 88" (2250mm) Dipper and HBCV Builds) $4,151
850M262 Hydrualic Quick Hitch (For 65" (1650mm) Dipper Without HBCV Builds) $4,151
850M264 Hydraulic Quick Hitch for 83" (2100mm) Dipper (850M290 Required) $4,152
850M265 Hydraulic Quick Hitch for 89" (2250mm) Dipper (850M291 Required) $4,152
850M286 Pipework For Hydraulic Hitch (For 65" (1650mm) Dipper & HBCV Builds (Excludes Hydraulic Hitch)) $1,412
850M287 Pipework For Hydraulic Hitch (For 83" (2100mm) Dipper & HBCV Builds (Excludes Hydraulic Hitch)) $1,412
850M288 Pipework For Hydraulic Hitch (For 88" (2250mm) Dipper & HBCV Builds (Excludes Hydraulic Hitch)) $1,412
850M289 Pipework For Hydraulic Hitch (For 65" (1650mm) Dipper (Not For HBCV) Excludes Hydraulic Hitch) $1,412
850M290 Pipework for Hydraulic Quick Hitch for 83" (2100mm) dipper (Excludes Hitch) $1,413
850M291 Pipework for Hydraulic Quick Hitch for 89" (2250mm) dipper (Excludes Hitch) $1,413
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 86C-1
All prices and specifications subject to change without notice page 27 of 42 85Z USD Price Page
2018
JCB COMPACT EXCAVATOR
86C-1 TAB
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 28 of 42 85Z USD Price Page
86C-1 TAB COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS
TRACKS
ELECTRICAL
OPERATORS AREA Meets SAE ROPS/TOPS/FOGS requirements with JCB Impact Protection front screen, left side
entry Cab equipped with fabric suspension seat, tilting cab, Intermittent wiper with wash/wipe, Roof
mounted worklights, 3 speed heater/demister with 9 adjustable air vents, Color LCD display, Digital
clock, 12v accessory socket, Interior light, Full audio/visual warning systems, Radio ready kit, Auto
idle throttle, Below idle system, 2 digging modes (Eco & Heavy), ISO servo controls with electro-
hydraulic dozer lever, Electro-proportional thumb controlled high flow double acting auxiliary, 10
selectable auxiliary flow rates, , Full control isolation, “2 go” hydraulic isolation, Highback
suspension seat, 100% steel bodywork.
JCB by Kohler Tier IV Final KDI 2504 - 60.8 SAE net hp (64.4). Common rail, 4-valve head,
turbocharger, electronic cooled EGR, turbocharger, oil control system and diesel-oxygenated
catalyst (DOC).
A premium closed center pump and valve provides improved flow sharing for smooth, precise and
balanced operation during multifunctioning. One variable displacement axial-type pump yields 41.8
gpm. Independent left and right track control. Hydraulic pumps drive integral track motors and
gearbox.
Rubber (optional steel) grease adjusted. Under carriage provides (1) upper and (5) lower rollers
per side. Track width 18". Ground pressure 5.97 lbs per square inch. Ground clearance 14". Two
speed travel 1.6 mph and 3.1 mph.
12 volt, with 80 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness
connectors.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT EXCAVATORS)
All prices and specifications subject to change without notice page 29 of 42 85Z USD Price Page
86C-1 TAB COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8689 86C-1 TAB Compact Excavator Base Machine (64.4 hp gross, Kohler Diesel 4 cylinder Engine) $103,983
OPERATOR'S AREA (E)
850A171 $5,120
UNDERCARRIAGE (E)
850B555 Rubber Tracks 18" (460mm) wide $0
850B556 Steel Tracks 18" (450mm) wide $897
850B557 Bridgestone Geogrip Rubber Tracks 18" (450mm) wide $8,687
850B558 Steel Tracks 24" (600mm) wide $1,091
CONTROLS (E)
850C320 $7,178
SEATS (E)
850D309 Vinyl Suspension Seat $0
850D310 Fabric Suspension Seat $0
850D311 Vinyl Suspension Seat (High Back) $337
850D312 Fabric Suspension Seat (High Back) $337
850D313 Fabric Air Suspension heated Seat (High back) with headrest $693
OPERATORS HANDBOOK (E)
850E295 American operator handbook $0
DIPPER (E)
850F333 Standard dipper for High & Low Flow Auxiliary 83" (2100mm) $931
DOZER BLADE (E)
850G306 Standard Dozer Blade 91" (2320mm) *For use with 18" (450mm) Tracks Only $0
850G309 Standard Dozer Blade 97" (2470mm)(850B558 Required) $512
850H524 Dozer Float System $623
Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning with JCB impact protection glass
(TAB only)
Dual Pattern Control System - ISO to SAE - High & Low Flow proportional auxiliary - Double acting hydraulic circuit
controlled via both joysticks
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
All prices and specifications subject to change without notice page 30 of 42 85Z USD Price Page
86C-1 TAB COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATORS COMPARTMENT OPTIONS **
850J054 Key Immobilizer $569
850J055 Pin Pad Immobilizer $569
850J056 Rotating Beacon $264
850J057 Magnetic Strobe Warning Light Beacon $366
850J058 Radio Kit (Includes Speakers) $222
850J061 Two LED Front Work Lights & One LED Rear Worklight $1,046
850J065 110V Block Heater $263
850J066 230V Block Heater $263
850J071 LiveLink $897
850K524 FOGS Guard kit - Level 1 $894
850K525 FOGS Guard kit - Level 2 $1,159
850K526 Front Screen Guard (course) $1,637
850K527 Front Screen Guard (fine) $1,610
850K528 Bucket ram Guard Protection $157
850K530 Fan Guard (Air Condition Builds Only) $286
850K532 Chaff Guard (For Air Condition Builds) $623
850K534 Chaff Guard (For Heater Builds) $623
850K536 Chaff and Fan Guard (For Air Condition Builds) $897
850K538 Chaff and Fan Guard (For Heater Builds) $897
850K540 Dipper Ram Guard Protection $285
850L545 Hydraulic biodegradable oil $1,844
850L548 USA parts book $92
850L552 Refueling pump $669
850L553 Fire Extinguisher 1KG ABC Powder $156
850L554 Travel alarm $531
850L557 Exterior mirror (left hand) $180
850L559 Rear view wide angled mirror $177
850L570 Rear Camera $1,377
850L617 Tool Kit (Grease gun and Cartridge) $83
850L618 Grease Gun and Cartridge Kit $28
850T007 Model Decals Supplied Loose With Machine Warning Decals Fitted $0
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 31 of 42 85Z USD Price Page
86C-1 TAB COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR & BUCKET OPTIONS
850H522 Grab Bucket Changeover Valve (For 83" 2100mm Dipper) $667
850M273 12" (300mm) Heavy Duty Ribbed Bucket: For 1.5" (45mm) Bucket Pins $1,022
850M115 18" (460mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,194
850M116 24" (600mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,364
850M117 32" (800mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,533
850M198 Thumb Ready Dipper for 65" Dipper only $271
850M199 Thumb Ready Dipper Not for 65" Dipper $271
850M203 16" (405mm) Standard Duty - 3.0 cu-ft capacity heaped $936
850M204 18" (460mm) Standard Duty - 3.6 cu-ft capacity heaped $983
850M205 24" (610mm) Standard Duty - 5.2 cu-ft capacity heaped $1,069
850M206 36" (915mm) Standard Bucket - 8.8 cu-ft capacity heaped $1,283
850M207 60" (1525mm) Grading Bucket - 7.7 cu-ft capacity heaped $1,083
850M208 32" (800mm) Bucket: For 1.5" (45mm) Bucket Pins $1,382
EXCAVATOR QUICK HITCH
850M270 Mechanical Quickhitch for HBCV Build $1,747
850M271 Mechanical Quick Hitch for dipper mounted attachments (pin set not included) $1,807
850M211 Pivot Pins Kit for use with Quick Hitch (1 additional set) $142
850M212 Pivot Pins Kit for use with Quick Hitch (2 additional sets) $287
850M213 Pivot Pins Kit for use with Quick Hitch (3 additional sets) $430
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 86C-1 TAB
All prices and specifications subject to change without notice page 32 of 42 85Z USD Price Page
2018
JCB COMPACT EXCAVATOR
90Z-1
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 33 of 42 85Z USD Price Page
90Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS
TRACKS
ELECTRICAL
EXCAVATOR
OPERATORS AREA Meets SAE ROPS/TOPS/FOGS requirements with JCB Impact Protection front screen, left side
entry Cab equipped with fabric suspension seat, tilting cab, Intermittent wiper with wash/wipe, Roof
mounted worklights, 3 speed heater/demister with 9 adjustable air vents, Color LCD display, Digital
clock, 12v accessory socket, Interior light, Full audio/visual warning systems, Radio ready kit, Auto
idle throttle, Below idle system, 2 digging modes (Eco & Heavy), ISO servo controls with electro-
hydraulic dozer lever, Electro-proportional thumb controlled high flow double acting auxiliary, 10
selectable auxiliary flow rates, , Full control isolation, “2 go” hydraulic isolation, Highback
suspension seat, 100% steel bodywork.
JCB by Kohler Tier IV Final KDI 2504 - 70.2 net hp. Common rail, 4-valve head, turbocharger,
electronic cooled EGR, turbocharger, oil control system and diesel-oxygenated catalyst (DOC).
A premium closed center pump and valve provides improved flow sharing for smooth, precise and
balanced operation during multifunctioning. One variable displacement axial-type pump. Independent
left and right track control. Hydraulic pumps drive integral track motors and gearbox.
Rubber (optional steel) grease adjusted. Under carriage provides (1) upper and (5) lower rollers
per side. Track width 18". Ground pressure 5.97 lbs per square inch. Ground clearance 14". Two
speed travel 1.6 mph and 3.1 mph.
12 volt, with 80 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness
connectors.
Maximum dig depth with standard 6' 11" dipper 13' 7", Bushed swing bracket with 500 hour dig end
greasing intervals. Servo controls, SAE and ISO patterns both available on 90-1 Compact Excavator
with DPC - Dual Pattern Control system. Auxiliary circuit provides 26.4 GPM for JCB hydraulic
breakers and other approved attachments. Dozer control. Boom swing left 5 degree, right 60
degree. Less excavator bucket. Double Acting Hydraulics optional fit
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT EXCAVATORS)
All prices and specifications subject to change without notice page 34 of 42 85Z USD Price Page
90Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8100 90Z-1 Compact Base Machine (73.8 hp gross, Kohler Diesel 4 cylinder Engine) $97,293
OPERATOR'S AREA (E)
850A186 $5,120
UNDERCARRIAGE (E)
850B555 Rubber Tracks 18" (460mm) wide $0
850B556 Steel Tracks 18" (450mm) wide $897
850B557 Bridgestone Geogrip Rubber Tracks 18" (450mm) wide $8,687
850B558 Steel Tracks 24" (600mm) wide $1,091
CONTROLS (E)
850C316 $2,114
850C318 $3,499
SEATS (E)
850D309 Vinyl Suspension Seat $0
850D310 Fabric Suspension Seat $0
850D311 Vinyl Suspension Seat (High Back) $337
850D312 Fabric Suspension Seat (High Back) $337
850D313 Fabric Air Suspension heated Seat (High back) with headrest $693
OPERATORS HANDBOOK (E)
850E568 American operator handbook $0
DIPPER (E)
850F326 Standard dipper for High Flow Auxiliary 89" (2250mm) $1,026
850F332 Standard dipper for High & Low Flow Auxiliary 83" (2100mm) $1,026
850F334 Standard Dipper for High & Low Flow Auxiliary 89" (2250mm) $1,026
850F351 Standard Dipper for High Flow Auxiliary 83" (2100mm) $1,026
DOZER BLADE (E)
850G306 Standard Dozer Blade 91" (2320mm) *For use with 18" (450mm) Tracks Only $0
850G308 4 Way Dozer (850C318 Required) $3,286
850G309 Standard Dozer Blade 97" (2470mm)(850B558 Required) $512
850H524 Dozer Float System $623
Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning with JCB laminated glass
Dual Pattern Control System - ISO to SAE - High Flow proportional auxiliary - Double acting hydraulic circuit controlled
via right hand joystick
Dual Pattern Control System - ISO to SAE - High & Low Flow proportional auxiliary - Double acting hydraulic circuit
controlled via both joysticks
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
change existing machines.
All prices and specifications subject to change without notice page 35 of 42 85Z USD Price Page
90Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATORS COMPARTMENT OPTIONS **
850J054 Key Immobilizer $569
850J055 Pin Pad Immobilizer $569
850J056 Rotating Beacon $264
850J057 Magnetic Strobe Warning Light Beacon $366
850J058 Radio Kit (Includes Speakers) $222
850J061 Two LED Front Work Lights & One LED Rear Worklight $1,046
850J065 110V Block Heater $263
850J066 230V Block Heater $263
850J071 LiveLink $897
850K524 FOGS Guard kit - Level 1 $894
850K525 FOGS Guard kit - Level 2 $1,159
850K526 Front Screen Guard (course) $1,637
850K527 Front Screen Guard (fine) $1,610
850K528 Bucket ram Guard Protection $157
850K531 Chaff Guard (For Air Condition Builds) $623
850K533 Chaff Guard (For Heater Builds) $623
850K535 Chaff and Fan Guard (For Air Condition Builds) $897
850K537 Chaff and Fan Guard (For Heater Builds) $897
850K539 Dipper Ram Guard Protection $285
850L545 Hydraulic biodegradable oil $1,844
850L552 Refueling pump $669
850L553 Fire Extinguisher 1KG ABC Powder $156
850L554 Travel alarm $531
850L557 Exterior mirror (left hand) $180
850L559 Rear view wide angled mirror $177
850L570 Rear Camera $1,377
850L617 Tool Kit (Grease gun and Cartridge) $83
850L618 Grease Gun and Cartridge Kit $28
850T005 Model Decals Supplied Loose With Machine Warning Decals Fitted $0
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 36 of 42 85Z USD Price Page
90Z-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR & BUCKET OPTIONS
850H522 Grab Bucket Changeover Valve (For 83" 2100mm Dipper) $667
850M273 12" (300mm) Heavy Duty Ribbed Bucket: For 1.5" (45mm) Bucket Pins $1,022
850M115 18" (460mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,194
850M116 24" (600mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,364
850M117 32" (800mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,533
850M198 Thumb Ready Dipper for 65" Dipper only $271
850M199 Thumb Ready Dipper Not for 65" Dipper $271
850M207 60" (1525mm) Grading Bucket - 7.7 cu-ft capacity heaped $1,083
EXCAVATOR QUICK HITCH
850M270 Mechanical Quickhitch for HBCV Build $1,747
850M271 Mechanical Quick Hitch for dipper mounted attachments (pin set not included) $1,807
850M211 Pivot Pins Kit for use with Quick Hitch (1 additional set) $142
850M212 Pivot Pins Kit for use with Quick Hitch (2 additional sets) $287
850M213 Pivot Pins Kit for use with Quick Hitch (3 additional sets) $430
850M245 Hydrualic Quick Hitch (For 65" (1650mm) Dipper and HBCV Builds) $4,151
850M247 Hydrualic Quick Hitch (For 83" (2100mm) Dipper and HBCV Builds) $4,151
850M248 Hydrualic Quick Hitch (For 88" (2250mm) Dipper and HBCV Builds) $4,151
850M262 Hydrualic Quick Hitch (For 65" (1650mm) Dipper Without HBCV Builds) $4,151
850M264 Hydraulic Quick Hitch for 83" (2100mm) Dipper (850M290 Required) $4,152
850M265 Hydraulic Quick Hitch for 89" (2250mm) Dipper (850M291 Required) $4,152
850M286 Pipework For Hydraulic Hitch (For 65" (1650mm) Dipper & HBCV Builds (Excludes Hydraulic Hitch)) $1,412
850M287 Pipework For Hydraulic Hitch (For 83" (2100mm) Dipper & HBCV Builds (Excludes Hydraulic Hitch)) $1,412
850M288 Pipework For Hydraulic Hitch (For 88" (2250mm) Dipper & HBCV Builds (Excludes Hydraulic Hitch)) $1,412
850M289 Pipework For Hydraulic Hitch (For 65" (1650mm) Dipper (Not For HBCV) Excludes Hydraulic Hitch) $1,412
850M290 Pipework for Hydraulic Quick Hitch for 83" (2100mm) dipper (Excludes Hitch) $1,413
850M291 Pipework for Hydraulic Quick Hitch for 89" (2250mm) dipper (Excludes Hitch) $1,413
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 90Z-1
All prices and specifications subject to change without notice page 37 of 42 85Z USD Price Page
2018
JCB COMPACT EXCAVATOR
100C-1
EFFECTIVE: JANUARY 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATE
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 38 of 42 85Z USD Price Page
100C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS
TRACKS
ELECTRICAL
EXCAVATOR
OPERATORS AREA Meets SAE ROPS/TOPS/FOGS requirements with JCB Impact Protection front screen, left side
entry Cab equipped with fabric suspension seat, tilting cab, Intermittent wiper with wash/wipe, Roof
mounted worklights, 3 speed heater/demister with 9 adjustable air vents, Color LCD display, Digital
clock, 12v accessory socket, Interior light, Full audio/visual warning systems, Radio ready kit, Auto
idle throttle, Below idle system, 2 digging modes (Eco & Heavy), ISO servo controls with electro-
hydraulic dozer lever, Electro-proportional thumb controlled high flow double acting auxiliary, 10
selectable auxiliary flow rates, , Full control isolation, “2 go” hydraulic isolation, Highback
suspension seat, 100% steel bodywork.
JCB by Kohler Tier IV Final KDI 2504 - 70.2 net hp. Common rail, 4-valve head, turbocharger,
electronic cooled EGR, turbocharger, oil control system and diesel-oxygenated catalyst (DOC).
A premium closed center pump and valve provides improved flow sharing for smooth, precise and
balanced operation during multifunctioning. One variable displacement axial-type pump. Independent
left and right track control. Hydraulic pumps drive integral track motors and gearbox.
Rubber (optional steel) grease adjusted. Under carriage provides (1) upper and (5) lower rollers
per side. Track width 18". Ground pressure 5.97 lbs per square inch. Ground clearance 14". Two
speed travel 1.6 mph and 3.1 mph.
12 volt, with 80 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness
connectors.
Maximum dig depth with standard 6' 11" dipper 14' 11", Bushed swing bracket with 500 hour dig end
greasing intervals. Servo controls, SAE and ISO patterns both available on 100C-1 Compact
Excavator with DPC - Dual Pattern Control system. Auxiliary circuit provides 26.4 GPM for JCB
hydraulic breakers and other approved attachments. Dozer control. Boom swing left 5 degree,
right 60 degree. Less excavator bucket. Double Acting Hydraulics optional fit
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT EXCAVATORS)
All prices and specifications subject to change without notice page 39 of 42 85Z USD Price Page
100C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8105 100C-1 Compact Base Machine (73.8 hp gross, Kohler Diesel 4 cylinder Engine) $106,400
OPERATOR'S AREA (E)
850A186 $5,120
UNDERCARRIAGE (E)
850B555 Rubber Tracks 18" (460mm) wide $0
850B556 Steel Tracks 18" (450mm) wide $897
850B557 Bridgestone Geogrip Rubber Tracks 18" (450mm) wide $8,687
850B558 Steel Tracks 24" (600mm) wide $1,091
CONTROLS (E)
850C336 $2,073
850C338 $3,499
SEATS (E)
850D309 Vinyl Suspension Seat $0
850D310 Fabric Suspension Seat $0
850D311 Vinyl Suspension Seat (High Back) $337
850D312 Fabric Suspension Seat (High Back) $337
850D313 Fabric Air Suspension heated Seat (High back) with headrest $693
OPERATORS HANDBOOK (E)
850E595 American operator handbook $0
DIPPER (E)
850F351 Standard Dipper for High Flow Auxiliary 83" (2100mm) $1,026
#REF! #REF! #REF!
850F354 Standard dipper for High & Low Flow Auxiliary 83" (2100mm) $1,026
DOZER BLADE (E)
850G306 Standard Dozer Blade 91" (2320mm) *For use with 18" (450mm) Tracks Only $0
850G309 Standard Dozer Blade 97" (2470mm)(850B558 Required) $512
850G315 4 Way Dozer 91" (2320mm) *For use with 18" (450mm) Tracks Only with High and Low Flow Auxiliary System $3,287
850H524 Dozer Float System $623
Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning with JCB laminated glass
Dual Pattern Control System - ISO to SAE - High Flow proportional auxiliary - Double acting hydraulic circuit controlled
via right hand joystick
Dual Pattern Control System - ISO to SAE - High & Low Flow proportional auxiliary - Double acting hyd circuit
controlled via both joysticks
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from
each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to
All prices and specifications subject to change without notice page 40 of 42 85Z USD Price Page
100C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATORS COMPARTMENT OPTIONS **
850J054 Key Immobilizer $569
850J055 Pin Pad Immobilizer $569
850J056 Rotating Beacon $264
850J057 Magnetic Strobe Warning Light Beacon $366
850J058 Radio Kit (Includes Speakers) $222
850J061 Two LED Front Work Lights & One LED Rear Worklight $1,046
850J065 110V Block Heater $263
850J066 230V Block Heater $263
850J071 LiveLink $897
850K524 FOGS Guard kit - Level 1 $894
850K525 FOGS Guard kit - Level 2 $1,159
850K526 Front Screen Guard (course) $1,637
850K527 Front Screen Guard (fine) $1,610
850K557 Bucket ram guard protection $155
850K558 Dipper Ram Guard Protection (For Machines Without HBCV) $280
850L545 Hydraulic biodegradable oil $1,844
850L552 Refueling pump $669
850L553 Fire Extinguisher 1KG ABC Powder $156
850L554 Travel alarm $531
850L557 Exterior mirror (left hand) $180
850L559 Rear view wide angled mirror $177
850L570 Rear Camera $1,377
850L617 Tool Kit (Grease gun and Cartridge) $83
850L618 Grease Gun and Cartridge Kit $28
850T007 Model Decals Supplied Loose With Machine Warning Decals Fitted $0
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 41 of 42 85Z USD Price Page
100C-1 COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR & BUCKET OPTIONS
850H522 Grab Bucket Changeover Valve (For 83" 2100mm Dipper) $667
850M115 18" (460mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,194
850M116 24" (600mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,364
850M117 32" (800mm) Heavy Duty Bucket: For 1.5" (45mm) Bucket Pins $1,533
850M198 Thumb Ready Dipper for 65" Dipper only $271
850M199 Thumb Ready Dipper Not for 65" Dipper $271
850M207 60" (1525mm) Grading Bucket - 7.7 cu-ft capacity heaped $1,083
EXCAVATOR QUICK HITCH
850M270 Mechanical Quickhitch for HBCV Build $1,747
850M271 Mechanical Quick Hitch for dipper mounted attachments (pin set not included) $1,807
850M273 12" (300mm) Heavy Duty Ribbed Bucket: For 1.5" (45mm) Bucket Pins $1,022
850M211 Pivot Pins Kit for use with Quick Hitch (1 additional set) $142
850M212 Pivot Pins Kit for use with Quick Hitch (2 additional sets) $287
850M213 Pivot Pins Kit for use with Quick Hitch (3 additional sets) $430
850M324 Pipework for Hydraulic Quick Hitch for 83" (2100mm) dipper (Excludes Hydraulic Hitch) $1,386
850M330 Hydraulic Quick Hitch for 83" (2100mm) dipper (850M324 Required) $4,071
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB
AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO
TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 100C-1
All prices and specifications subject to change without notice page 42 of 42 85Z USD Price Page
2018
JCB COMPACT EXCAVATOR
8029 CTS
EFFECTIVE: January 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
8029 CTS COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
STANDARD EQUIPMENT
ENGINE 1.7 L regulation compliant 32.7 gross horsepower, Perkins engine,
centrifugal dry type air cleaner. Water separator, spin on oil filter, thermostart assist,
antifreeze protection to -35 degrees F.
TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors
and gearbox. Two speed travel 1.5 mph and 2.7 mph.
TRACKS 10" rubber tracks (optional steel tracks) with 3 rollers per side result in 4.5 psi
ground pressure. 12" of ground clearance
Ground pressure 4.55 lbs per square inch. Ground clearance 6". Hydraulically actuated
ELECTRICAL 12 volt system with 65 amp alternator, 475 CCA heavy duty battery. Waterproof
wire harness connectors
EXCAVATOR
Pattern Control (JCB Plus and ISO) activated via electric toggle switch. Auxiliary circuit
provides 15.3 GPM for JCB hydraulic breakers and other approved attachments.
Boom swing left 45 degree, right 60 degree. Less excavator bucket.
CANOPY Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Vinyl suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Left control pod rotates 90 degrees to provide easy access to the operators compartment
Meets SAE TOPS/FOPS/FOGS, left side entry.Canopy and optional cab tilts up for improved
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
CAB (OPTIONAL) Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.
Cloth suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box
Enclosed cab is equipped with heater/defroster, windshield wiper, front and side opening windows.
Left control pod rotates 90 degrees to provide easy access to the operators compartment
and locks the excavator controls to prevent inadvertent boom/bucket movement.
Hand operated tracking levers with flip over foot pedals. Instrument panel contains:
ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.
Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed
via electric switch on the left joystick. Double Acting hydraulics.
8' 5" Max. dig depth with standard 3'7" dipper. Servo controls, with selectable DPC - Dual
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)
All prices and specifications subject to change without notice page 2 of 5 8029 USD Price Page Issue 2
8029 CTS COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
YELLOW SERIES PACKAGE BUILD
SALES 8029 CTS
CODE ITEM CANOPY
8429 8029 CTS base machine (3 cylinder 1.7 liter Perkins Diesel engine, 32.7 HP gross)
800A427 Canopy TOPS/FOPS/FOGS certified
800B426 Rubber Tracks - 10" (254mm) width, Bridgestone
800C427 Dual Pattern Servo Control system - ISO (Excavator) to SAE (Backhoe) with One Foot Auxiliary
800D429 Vinyl suspension seat
800E438 American language pack
800F426 Standard Dipper 51.2" (1300mm)
800G426 Standard dozer blade (5' 1" wide)
800H426 Double acting auxiliary hydraulic circuit with change over valve
800J409 Front work lights (canopy mounted)
800L422 Travel Alarm
800M412 18" (460mm) Standard Duty - 1.91 cu-ft capacity
$36,238
Select the following machine PACKAGE BUILD codes. Package build configurations cannot normally be changed. If a Package
Build does not meet your requirements please order a machine using the Custom Build Section. Attachments & Options
Sections following.
All prices and specifications subject to change without notice page 3 of 5 8029 USD Price Page Issue 2
8029 CTS COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: January
1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
8429 8029 CTS base machine (3 cylinder 1.7 liter Perkins Diesel engine, 32.7 HP gross) $32,462
OPERATOR'S AREA (E)
800A426 Cab TOPS/FOPS/FOGS certified with Heater $2,841
800A427 Canopy TOPS/FOPS/FOGS certified $1,322
UNDERCARRIAGE (E)
800B409 Steel Tracks - 10" (254mm) width $1,265
800B426 Rubber Tracks - 10" (254mm) width, Bridgestone $362
800B428 Rubber Tracks - 12" (300mm) width, Bridgestone $369
CONTROLS (E)
800C425 Dual Pattern Servo Control system - ISO (Excavator) to SAE (Backhoe) with No Auxiliary $421
800C427 Dual Pattern Servo Control system - ISO (Excavator) to SAE (Backhoe) with One Foot Auxiliary $421
SEATS (E)
800D427 Fabric suspension seat $242
800D429 Vinyl suspension seat $242
OPERATORS HANDBOOK (E)
800E438 American language pack $0
DIPPER (E)
800F426 Standard Dipper 51.2" (1300mm) $0
800F427 Standard Dipper 43.3" (1100mm) $395
DOZER BLADE (E)
800G426 $0
OPERATORS COMPARTMENT (E)
800K403 FOGS Guard kit $0
HYDRAULIC CIRCUIT & PIPEWORK OPTIONS
800H426 Double acting auxiliary hydraulic circuit with change over valve $303
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting
one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer
All prices and specifications subject to change without notice page 4 of 5 8029 USD Price Page Issue 2
8029 CTS COMPACT EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: January
1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATORS COMPARTMENT OPTIONS **
800J405 Beacon - Amber rotating - 12v $191
800J407 Front work lights (cab mounted) $134
800J408 Front work lights (canopy with no FOGS) $137
800J409 Front work lights (canopy mounted) $134
800L413 External mirror - Cab Mounted $79
800L416 Panolin 46 Biodegradable Oil $715
800L419 Tool Kit (Grease gun and Cartridge) $55
800L422 Travel Alarm $344
800L429 Battery Isolator $253
800L490 Hot Climate Kit (Fixed Cooling Fan, Revised Fan Cowl, Additional Vent in Fill Panel) $183
EXCAVATOR & BUCKET OPTIONS (not compatible with Quickhitch)
800M313 47" (1200mm) Ditching Bucket - 5.07 cu-ft capacity $662
800M410 9" (230mm) Standard Duty - 0.83 cu-ft capacity $528
800M411 12" (300mm) Standard Duty - 1.16 cu-ft capacity $568
800M412 18" (460mm) Standard Duty - 1.91 cu-ft capacity $648
800M413 24" (600mm) Standard Duty - 2.62 cu-ft capacity $737
800M414 30" (760mm) Standard Duty - 3.33 cu-ft capacity $797
800M415 39" (1000mm) Ditching Bucket - 5.07 cu-ft capacity $676
EXCAVATOR QUICK HITCH
800M407 Pivot Pin Kit $67
800M409 Mechanical quick hitch $1,069
800M426 $71
SECTION 4 - ATTACHMENTS
Select Optional Equipment as desired within limitations if indicated.
** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE
THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR
COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.
*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8029
All prices and specifications subject to change without notice page 5 of 5 8029 USD Price Page Issue 2
2018
JCB HYDRADIG
110W T4F
EFFECTIVE: JANUARY 1, 2018
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
STANDARD EQUIPMENT
ENGINE
TRANSMISSION Fully hydrostatic closed loop drive system. 85cc variable displacement axial piston pump
independent from working hydraulics. Maximum speed of 25 mph in highway mode. 12.4
mph in site mode. Permanent 4 wheel drive. 2-Wheel, 4-Wheel and Crab Steering mode.
Auto Drive automatically maintains a chosen engine speed. 7,700 lb (3.5t) towing capacity.
CHASSIS Engine, fuel tank, hydraulic tank, battery and storage all integrated into the chassis lowering
the centre of gravity for increased stability and improving service access. 50:50 weight distribution
laterally and longitudinally. Rear parallel dozer with tow hitch.
CAB JCB Command Plus Cab. ROPS and TOPS certified structure. All information is displayed through
a 7" color monitor. Heated and climate controlled with heated air suspension seat. 8 worklights
(2x Boom, 2x Cab front, 2x Cab rear, 2x Cab side). Storage pouch on seatback, cup holder, bottle
holder and phone/MP3 tray. USB port, 3.5mm auxiliary input and 12V socket. Attachment control
system.
TIRES Dual Solideal 9.00x20 pneumatic tires with solid spacers ensure maximum stability. +/- 8°
oscillating front axle for traction and stability on uneven ground. Fenders cover all wheels and
steer/oscillate with the axle. 13' 8" minimum turning radius. Disc type parking brake.
HYDRAULICS 1x High flow, bi-directional proportional auxiliary line up to 31.7 gpm. 2x Low flow
bi-directional proportional auxiliary lines up to 15.9 gpm. Dedicated quickhitch pipework.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
performance data.
OPERATING WEIGHT Equipped with 2.0m T.A.B, dual tires, rear parallel dozer, 340lb fuel, 165lb operator: approx 24,315lbs.
WARRANTY 2 Year/2,000 hour full coverage warranty (please see the machine warranty certificate for details)
JCB Ecomax 444, 109 HP at 2,200 RPM. 381 lb-ft of torque at 1,500 RPM. Four-cylinder water cooled common rail direct injection diesel engine. Low emission engine, EPA Tier 4 Final compliant. Dual element air cleaner. Selective Catalytic Reduction (SCR) System.
SECTIONS ARE ORGANIZED AS FOLLOWS:
Section 1 - PACKAGE BUILDS
Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS
Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
HYDRADIG 110W T4F
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - YELLOW SERIES
SALES
CODE ITEM HYDRADIG 110W
895F JCB 110W T4F TAB ����
895A021 REAR DOZER PARALLEL LIFT (INCLUDES FRONT CHASSIS MOUNTS) ����
895B001 SOLIDEAL 9.00X20 DUAL WHEELS ����
895C035 6' 6" DIPPER - HIGH FLOW/ HAMMER/ AUXILIARY PROPORTIONAL WITH 2x LOW FLOW TAB ����
895D003 25 MPH TRANSMISSION ����
895E030 ENGLISH LANGUAGE PACK ����
895F003 CLIMATE CONTROL ����
895G005 SMOOTH RIDE SYSTEM TAB ����
895G006 HAND HELD TOOLS FRONT ONLY ����
895G035 HIGH PRESSURE QUICKHITCH PIPEWORK FOR 2000MM DIPPER ����
895H006 ROTATING AMBER STROBE BEACON ����
895H010 DELUXE SEAT: HIGH BACK FABRIC, HEATED BASE AND AIR SUSPENSION + SEAT BELT SWITCH ����
895H013 RADIO KIT - INCLUDES RADIO AND SPEAKERS ����
895H014 CONVENIENCE PACK: 1x USB, 1x 3.5mm JACK & 1x 12V SOCKET ����
895H015 REAR SCREEN WIPER WITH WASH ����
895J005 REVERSE ALARM KIT ����
895J009 UPGRADE WORKLIGHTS TO LED:2X BOOM 2X CAB FRONT 2X CAB REAR 2X CAB SIDE ����
895K004 WHEEL FENDERS: FOR DUAL AND FLOATATION WHEELS ����
895K018 TRAILER TOWING KIT CLEVIS FOR REAR PARALLEL DOZER ����
895L006 AUTO UP: REAR ����
895L007 REVERSE STEER ����
895M001 JCB HYDRAULIC QUICK COUPLER ����
895M004 1x ADDITIONAL BUCKET PIN ����
895M019 HD BUCKET GA 24" ����
895M064 STEELWRIST READY (ELECTRICS) ����
895N003 TOOL KIT ����
895N009 COLD CLIMATE KIT:TWIN BATTERY, BLOCK HEATER 120V ����
895S006 BOOM TAB DIPPER & BUCKET HBCV: FOR 2000MM DIPPER (TAB) ����
SUGGESTED LIST PRICE $199,731
POPULAR ATTACHMENTS FOR PACKAGE BUILDS:
SALES U.S.
CODE ITEM LIST
ATTACHMENTS
NON TILT ROTATOR ATTACHMENTS
895M006 3x ADDITIONAL BUCKET PIN $290
895M019 HD BUCKET GA 24" $1,237
895M032 BUCKET GRADING 60" $1,401
895M001 JCB HYDRAULIC QUICK COUPLER $3,903
895M053 FRAME AND FORKS $3,094
TILT ROTATOR ATTACHMENTS
895M056 TILT ROTATOR X12 S50 $20,233
895M058 TILT ROTATOR X12 S50 (WITH GRIPPER) $26,148
895M066 S50 GRADING BUCKET 50" $3,465
895M068 S50 GP BUCKET WITH TEETH 28" $3,973
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the bottom of this sheet.
Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine
using the Custom Build, Attachments & Options Sections following.
HYDRADIG 110W T4F
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
895F JCB 110W T4F TAB $194,495
CHASSIS (E)
895A021 REAR DOZER PARALLEL LIFT (INCLUDES FRONT CHASSIS MOUNTS) $0
TIRES (E)
895B001 SOLIDEAL 9.00X20 DUAL WHEELS $0
895B002 ALLIANCE 550/45-22.5 FLOATATION WHEELS $502
ARM & AUXILIARY PIPEWORK
895C035 6' 6" DIPPER - HIGH FLOW/ HAMMER/ AUXILIARY PROPORTIONAL WITH 2x LOW FLOW TAB $0
TRANSMISSION (E)
895D003 25 MPH TRANSMISSION $0
LANGUAGE PACK (E)
895E030 ENGLISH LANGUAGE PACK $0
895E042 FRENCH LANGUAGE PACK $0
CAB (E)
895F003 CLIMATE CONTROL $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E
(Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change
existing machines.
HYDRADIG 110W T4F
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 3 - OPTIONS
SALES U.S.
CODE ITEM LIST
OPTIONS NEW FACTORY BUILT ORDERS ONLY
895G005 SMOOTH RIDE SYSTEM TAB $0
895G006 HAND HELD TOOLS FRONT ONLY $0
895G035 HIGH PRESSURE QUICKHITCH PIPEWORK FOR 2000MM DIPPER $0
895H006 ROTATING AMBER STROBE BEACON $0
895H010 DELUXE SEAT: HIGH BACK FABRIC, HEATED BASE AND AIR SUSPENSION + SEAT BELT SWITCH $0
895H013 RADIO KIT - INCLUDES RADIO AND SPEAKERS $0
895H014 CONVENIENCE PACK: 1x USB, 1x 3.5mm JACK & 1x 12V SOCKET $0
895H015 REAR SCREEN WIPER WITH WASH $0
895J005 REVERSE ALARM KIT $0
895J009 UPGRADE WORKLIGHTS TO LED:2X BOOM 2X CAB FRONT 2X CAB REAR 2X CAB SIDE $0
895K004 WHEEL FENDERS: FOR DUAL AND FLOATATION WHEELS $0
895K018 TRAILER TOWING KIT CLEVIS FOR REAR PARALLEL DOZER $0
895L006 AUTO UP: REAR $0
895L007 REVERSE STEER $0
895N003 TOOL KIT $0
895N009 COLD CLIMATE KIT:TWIN BATTERY, BLOCK HEATER 120V $0
895S006 BOOM TAB DIPPER & BUCKET HBCV: FOR 2000MM DIPPER (TAB) $0
895M064 STEELWRIST READY (ELECTRICS) $0
HYDRADIG 110W T4F
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 1, 2018
SECTION 4 - ATTACHMENTS
SALES U.S.
CODE ITEM LIST
ATTACHMENTS (ORDER PINS SEPARATELY)
NON TILT ROTATOR ATTACHMENTS
895M004 1x ADDITIONAL BUCKET PIN $95
895M005 2x ADDITIONAL BUCKET PIN $193
895M006 3x ADDITIONAL BUCKET PIN $290
895M007 BUCKET DP 12'' Bolt On Teeth $1,666
895M008 BUCKET DP 14" Bolt On Teeth $1,827
895M009 BUCKET DP 16" Bolt On Teeth $1,858
895M010 BUCKET DP 18" Bolt On Teeth $2,096
895M011 BUCKET DP 24" Bolt On Teeth $2,388
895M012 BUCKET DP 32" Bolt On Teeth $2,689
895M013 BUCKET DP 36" Bolt On Teeth $2,893
895M052 BUCKET DP 42" Bolt On Teeth $3,256
895M014 HD BUCKET GA 10" $1,022
895M015 HD BUCKET GA 12" $1,121
895M016 HD BUCKET GA 16" $1,080
895M017 HD BUCKET GA 18" $1,125
895M018 HD BUCKET GA 20" $1,162
895M019 HD BUCKET GA 24" $1,237
895M020 HD BUCKET GA 32" $1,388
895M021 HD BUCKET GA 36" $1,525
895M022 BUCKET GP 10" Bolt On Teeth $691
895M023 BUCKET GP 12" Bolt On Teeth $944
895M024 BUCKET GP 16" Bolt On Teeth $1,040
895M025 BUCKET GP 18" Bolt On Teeth $1,093
895M026 BUCKET GP 20" Bolt On Teeth $974
895M027 BUCKET GP 24" Bolt On Teeth $1,188
895M028 BUCKET GP 32" Bolt On Teeth $1,412
895M029 BUCKET GP 36" Bolt On Teeth $1,426
895M051 BUCKET GP 42" Bolt On Teeth $1,756
895M031 BUCKET GRADING 72" $1,477
895M032 BUCKET GRADING 60" $1,401
895M033 BUCKET DITCHING 72" $1,642
895M034 BUCKET DITCHING 60" $1,204
895M035 JAW BUCKET 24" $7,806
895M043 TAPERED BUCKET 12"/42" $1,615
895M044 TAPERED BUCKET 15"/66" $2,429
980/B0198 48" GROUND RAKE $2,927
980/B0199 60" GROUND RAKE $3,276
895M002 Mechanical Coupler $1,183
895M001 JCB HYDRAULIC QUICK COUPLER $3,903
895M036 STANDARD PATCH PLANER $19,834
895M037 ROCK WHEEL $50,084
895M047 COMPACTOR $6,292
895M039 RIPPER TOOTH $1,284
980/B0251 HM033T BREAKER $7,531
980/B0264 HM054T BREAKER $10,001
895M046 TILTING BUCKET 58" $8,069
980/A0600 SELECTOR GRAB SG140 GRAB + HOSES $22,802
895M053 FRAME AND FORKS $3,094
895M040 EARTH DRILL 36" Diameter $4,640
128/C0220 12" HEAVY DUTY 3 TEETH (side pin teeth with welded on adaptors) $1,452
128/C0223 18" HEAVY DUTY 4 TEETH (side pin teeth with welded on adaptors) $1,498
128/C0225 24" HEAVY DUTY 4 TEETH (side pin teeth with welded on adaptors) $1,786
128/C0228 24" HEAVY DUTY 5 TEETH (side pin teeth with welded on adaptors) $1,832
128/C0226 30" HEAVY DUTY 5 TEETH (side pin teeth with welded on adaptors) $1,865
128/C0227 36" HEAVY DUTY 6 TEETH (side pin teeth with welded on adaptors) $2,240
TILT ROTATOR & ATTACHMENTS
895M056 TILT ROTATOR X12 S50 $20,233
895M058 TILT ROTATOR X12 S50 (WITH GRIPPER) $26,148
895M066 S50 GRADING BUCKET 50" $3,465
895M068 S50 GP BUCKET WITH TEETH 28" $3,973
895M070 S50 GP BUCKET WITHOUT TEETH 28" $3,465
HYDRADIG 110W T4F
2018
JCB HYDRAULIC EXCAVATOR
JS 131
EFFECTIVE: January 1, 2018
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 68.6
GPM. Servo pump flow: 5.3 GPM.
OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.
Opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully
adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline. Two boom and
one mainframe work light
CONTROLS
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 15' 5" (4.7m). Dippers: 8' 2" (2.5m), 9' 10" (3.0m).
UNDERCARRIAGE The undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Twin top and seven
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 2 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 4.1 MPH, low speed is 2.4 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 55 amp output alternator
with 12 volt in-cab supply.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
OPERATING WEIGHT Equipped with standard boom, dipper, 24" track shoes and excavator bucket: apprx. 30,350 lbs.
WARRANTY 3-year / 3,000 hour full coverage warranty (please see the machine warranty certificate for details)
JCB Ecomax 444, 74 HP at 1,800 RPM. Four-cylinder water cooled common rail direct
injection diesel engine. Low emission engine, EPA Tier 4 Final compliant. Dual element air
cleaner.
Excavator controls are ISO pattern, servo operated, with in cab 7" digital display and change
over control to SAE. Tracks are individually operated by foot pedal or hand lever. Speed
selection via joystick operated switch. Control isolation by gate lock lever at cab entrance
and a console mounted switch.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
JS131 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 2 of 45 JS131 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - YELLOW SERIES
SALES
CODE ITEM JS131
9290 JS131 LC Primary Build Tier 4 Final ✓
900A448 Long Undercarriage 78" (1990mm) Gauge, Overall Length: 141" (3585mm) ✓
900B597 24" (600mm), Triple Grouser - 44 Link Tracks ✓
900C264 Monoboom with 9' 10" (3.0 m) Dipper. No HBCV ✓
900D396 Tipping Link with Lifting Shackle ✓
900E1U1 North American Manual Pack ✓
900KF09 ✓
900M019 ✓
900R001 ✓
SUGGESTED LIST PRICE $133,178
ATTACHMENTS FOR YELLOW SERIES:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
YWSLA01 ADD 36120X2. 36" BUCKET $3,344
YWSLA02 ADD HT120. MAIN PIN HYDRAULIC THUMB $7,179
YWSLA03 ADD 980/A8250. HYDRAULIC COUPLER $4,914
YWSLA04 ADD 980/B0202. HM090T $17,613
YWSLA21 ADD 24120X2. 24" BUCKET $2,641
Hammer/Auxilliary Prop Mono 3.0m Arm
Quick Hitch Lite Installation Kit
AM/FM Radio
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the bottom of this sheet. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please o rder a machine using the Custom Build, Attachments & Options Sections following.
JS131 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 3 of 45 JS131 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9290 JS131 LC Primary Build Tier 4 Final $125,465
UNDERCARRIAGE for 9290 BASE UNIT (E)
900A448 Long Undercarriage 78" (1990mm) Gauge, Overall Length: 141" (3585mm) $0
TRACK PADS FOR 9290 BASE UNIT (E)
900B597 24" (600mm), Triple Grouser - 44 Link Tracks $2,970
900B598 28" (700mm), Triple Grouser - 44 Link Tracks $3,670
900B594 20" (500mm), GeoGrip Rubber Tracks $14,478
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C261 Monoboom with 8' 2" (2.5 m) Dipper. No HBCV $1,053
900C264 Monoboom with 9' 10" (3.0 m) Dipper. No HBCV $1,053
TIPPING LINK (E)
900D396 Tipping Link with Lifting Shackle $477
MANUAL PACK (E)
900E1U1 North American Manual Pack $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
JS131 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 4 of 45 JS131 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK - NEW FACTORY BUILT ORDERS ONLY
900KF08 $1,523
900KF09 $1,523
Notes:
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900M108 Hydraulic Quick Hitch $4,590
900M019 Quick Hitch Lite Installation Kit $1,523
900P210 Scavenger Type Precleaner System $269
900R001 AM/FM Radio $169
900R011 Deluxe Seat - Air Suspension and Heated Base $726
900R035 Rainguard - Cab Mounted $484
900R130 Lower Level Windscreen Wiper $256
900S010 Vandal Cover Kit $2,282
900S020 FOPS Level 2 Guard - Front Windshield and Roof $5,618
900S025 Mesh Screen Guard for Front Windshield $1,477
900S034 LED Worklights $814
900S130 Additional Worklights $470
900S140 Amber Beacon - Cab Roof $182
900S253 Rear View Camera $698
900V001 HP32 Hydraulic Oil - for Cold Climate Operation $0
900V002 HP68 Hydraulic Oil - for Hot Climate Operation $0
900X040 Refueling Pump $590
900X381 Shut-off Valves For Auxiliary/Hammer Circuit (For 8' 2" (2.5m) Dipper) $723
900X382 Shut-off Valves For Auxiliary/Hammer Circuit (For 9' 10" (3.0mm) Dipper) $723
900X531 Twin Track Guides $1,404
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
YWSLA01 ADD 36120X2. 36" BUCKET $3,344
YWSLA02 ADD HT120. MAIN PIN HYDRAULIC THUMB $7,179
YWSLA03 ADD 980/A8250. HYDRAULIC COUPLER $4,914
YWSLA04 ADD 980/B0202. HM090T $17,613
YWSLA21 ADD 24120X2. 24" BUCKET $2,641
• For additional factory installed hydraulic pipework options call JCB Product Marketing.
• Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
Hammer/Auxilliary Prop Mono 2.5m Arm
Hammer/Auxilliary Prop Mono 3.0m Arm
• High flow circuit pipework is dual function. The merged circuit adds in up to 70% of the flow from the
second main pump. When operator selects hammer function hydraulic flow is delivered in one direction
to run hammer. Circuit is operated by foot pedal. When auxiliary function is selected the same pump
flow is delivered bi-directionally to run tool. Circuit can be operated by the foot pedal, hand control
buttons or slider depending on code available.
JS131 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 5 of 45 JS131 USA Price Page
2018
JCB HYDRAULIC EXCAVATOR
JZ141D
EFFECTIVE: January 1, 2018
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 68.6
GPM. Servo pump flow: 5.3 GPM.
OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.
Opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully
adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline. Two boom and
one mainframe work light
CONTROLS
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 15' 5" (4.7m). Dippers: 8' 2" (2.5m), 9' 10" (3.0m).
UNDERCARRIAGE The undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Twin top and seven
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 2 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 4.1 MPH, low speed is 2.4 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 55 amp output alternator
with 12 volt in-cab supply.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
OPERATING WEIGHT Equipped with standard boom, dipper, 24" track shoes and excavator bucket: apprx. 35,280 lbs.
WARRANTY 3-year / 3,000 hour full coverage warranty (please see the machine warranty certificate for details)
JCB Ecomax 444, 74 HP at 1,800 RPM. Four-cylinder water cooled common rail direct
injection diesel engine. Low emission engine, EPA Tier 4 Final compliant. Dual element air
cleaner.
Excavator controls are ISO pattern, servo operated, with in cab 7" digital display and change
over control to SAE. Tracks are individually operated by foot pedal or hand lever. Speed
selection via joystick operated switch. Control isolation by gate lock lever at cab entrance
and a console mounted switch.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
JZ141D HYDRAULIC EXCAVATOR
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - YELLOW SERIES
SALES
CODE ITEM JZ141D
9145 JZ141 LC T4F Monoboom With Dozer ✓
900A483 Long Undercarriage 78" (1990mm) Gauge, Overall Length: 141" (3585mm) ✓
900B614 24" (600mm), 44 Links, Triple Grouser - Dozer Width 103" (2610mm) ✓
900C393 Monoboom with 9' 10" (3.0 m) Dipper. No HBCV ✓
900D396 Tipping Link with Lifting Shackle ✓
900EC07 North American Manual Pack ✓
900KM24 ✓
900M036 ✓
900R001 ✓
SUGGESTED LIST PRICE $152,951
ATTACHMENTS FOR YELLOW SERIES:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
YWSLA01 ADD 36120X2. 36" BUCKET $3,344
YWSLA02 ADD HT120. MAIN PIN HYDRAULIC THUMB $7,179
YWSLA04 ADD 980/B0202. HM090T $17,613
YWSLA06 ADD 980/A8250. HYDRAULIC COUPLER $4,914
YWSLA21 ADD 24120X2. 24" BUCKET $2,641
Hammer/Auxilliary Prop Mono 3.0m Arm
Quick Hitch Lite Installation Kit
AM/FM Radio
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the bottom of this sheet. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please o rder a machine using the Custom Build, Attachments & Options Sections following.
JZ141D HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 8 of 45 JSZ141D USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9145 JZ141 LC T4F MONOBOOM WITH DOZER $145,237
UNDERCARRIAGE for 9290 BASE UNIT (E)
900A483 LONG UNDERCARRIAGE, 1990MM (78IN) GAUGE, 3585MM (141IN) LONG $0
TRACK PADS FOR 9290 BASE UNIT (E)
900B614 600MM (24IN), 44 LINKS, TRIPLE GROUSER - DOZER WIDTH 2610MM (103IN) $2,970
900B615 700MM (28IN), 44 LINKS, TRIPLE GROUSER - DOZER WIDTH 2710MM (107IN) $3,670
900B620 500MM (20IN), GEOGRIP RUBBER TRACKS WITH DOZER $14,478
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C392 MONOBOOM, 0 HBCV, 2.5M DIPPER $1,053
900C393 MONOBOOM, 0 HBCV, 3.0M DIPPER $1,053
TIPPING LINK (E)
900D396 Tipping Link with Lifting Shackle $477
MANUAL PACK (E)
900EC07 USA HOMOLOGATION PACK $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
JZ141D HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 9 of 45 JZ141D USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK - NEW FACTORY BUILT ORDERS ONLY
900KM23 $1,523
900KM24 $1,523
Notes:
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900M106 HYDRAULIC QUICK HITCH $4,590
900M036 HYDRAULIC QUICK HITCH LITE INSTALLATION $1,523
900P210 Scavenger Type Precleaner System $269
900R001 AM/FM Radio $169
900R011 Deluxe Seat - Air Suspension and Heated Base $726
900R035 Rainguard - Cab Mounted $484
900R130 Lower Level Windscreen Wiper $256
900S010 Vandal Cover Kit $2,282
900S020 FOPS Level 2 Guard - Front Windshield and Roof $5,618
900S025 Mesh Screen Guard for Front Windshield $1,477
900S034 LED Worklights $814
900S130 Additional Worklights $470
900S140 Amber Beacon - Cab Roof $182
900S253 Rear View Camera $698
900V001 HP32 Hydraulic Oil - for Cold Climate Operation $0
900V002 HP68 Hydraulic Oil - for Hot Climate Operation $0
900X040 Refueling Pump $590
900X381 Shut-off Valves For Auxiliary/Hammer Circuit (For 8' 2" (2.5m) Dipper) $723
900X382 Shut-off Valves For Auxiliary/Hammer Circuit (For 9' 10" (3.0mm) Dipper) $723
900X531 Twin Track Guides $1,404
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
YWSLA01 ADD 36120X2. 36" BUCKET $3,344
YWSLA02 ADD HT120. MAIN PIN HYDRAULIC THUMB $7,179
YWSLA04 ADD 980/B0202. HM090T $17,613
YWSLA06 ADD 980/A8250. HYDRAULIC COUPLER $4,914
YWSLA21 ADD 24120X2. 24" BUCKET $2,641
• For additional factory installed hydraulic pipework options call JCB Product Marketing.
• Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
HAMMER/AUX PROP. CONTROLS - 2.5M DIPPER
HAMMER/AUX PROP. CONTROLS - 3.0M DIPPER
• High flow circuit pipework is dual function. The merged circuit adds in up to 70% of the flow from the
second main pump. When operator selects hammer function hydraulic flow is delivered in one direction
to run hammer. Circuit is operated by foot pedal. When auxiliary function is selected the same pump
flow is delivered bi-directionally to run tool. Circuit can be operated by the foot pedal, hand control
buttons or slider depending on code available.
JZ141D HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 10 of 45 JZ141D USA Price Page
2018
JCB HYDRAULIC EXCAVATOR
JS 145 andJS 145 Dozer
EFFECTIVE: January 1, 2018
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 70.7
GPM. Servo pump flow: 5.5 GPM.
OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.
Opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully
adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline. Two boom and
one mainframe work light
CONTROLS
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 15' 5" (4.7m). Dippers: 8' 2" (2.5m), 9' 10" (3.0m).
UNDERCARRIAGE The undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Twin top and seven
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 2 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 3.5 MPH, low speed is 2.1 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 55 amp output alternator
with 12 volt in-cab supply.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
OPERATING WEIGHT Equipped with standard boom, dipper, 24" track shoes and excavator bucket: apprx. 32,250 lbs.
Equipped with dozer blade, standard boom, dipper, 24" track shoes and excavator bucket: apprx. 34,000 lbs.
WARRANTY 3-year / 3,000 hour full coverage warranty (please see the machine warranty certificate for details)
JCB Ecomax 444, 109 HP at 2,050 RPM. Four-cylinder water cooled common rail direct
injection diesel engine. Low emission engine, EPA Tier 4 Final compliant. Dual element air
cleaner. Selective Catalytic Reduction (SCR) System.
Excavator controls are ISO pattern, servo operated, with in cab 3.5" digital display and
change over control to SAE. Tracks are individually operated by foot pedal or hand lever.
Speed selection via joystick operated switch. Control isolation by gate lock lever at cab
entrance and a console mounted switch.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
JS145 and JS145 with BLADE
All prices and specifications subject to change without notice. Page 12 of 45 JS145 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 9271ASALES JS145
CODE ITEM 9-10 Monoboom
9271 JS145 Primary Build Tier 4 Final ✓
900A114 Long Undercarriage, 78" (1990mm) Gauge, Overall Length: 142" (3605mm) ✓
900B521 24" (600mm), Triple Grouser - 44 Link Tracks ✓
900C264 Monoboom with 9' 10" (3.0 m) Dipper. No HBCV ✓
900D396 Tipping Link with Lifting Shackle ✓
900E2B4 North American Manual Pack ✓
900KF09 ✓
900M113 ✓
900R001 ✓
SUGGESTED LIST PRICE $141,337
PACKAGE BUILD CODE: 9272ASALES JS145
CODE ITEM With Blade
9272 JS145 with Dozer Primary Build Tier 4 Final ✓
900A115 Long Undercarriage, 78" (1990mm) Gauge, Overall Length: 142" (3605mm) ✓
900B526 24" (600mm), Triple Grouser - 44 Link Tracks, 103" Dozer Width ✓
900C264 Monoboom with 9' 10" (3.0 m) Dipper. No HBCV ✓
900D396 Tipping Link with Lifting Shackle ✓
900E2B4 North American Manual Pack ✓
900KF09 ✓
900M113 ✓
900R001 ✓
SUGGESTED LIST PRICE $152,927
ATTACHMENTS FOR PACKAGE BUILDS:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
HEAVY DUTY PLATE LIP
YWSLA01 #N/A #N/A
YWSLA02 Counterweight with Red and White Chevrons $1,208
YWSLA03 Grease Gun + Cartridge $26
YWSLA04 48" Wide Bucket, 1.2 cu yd $5,481
YWSLA21 30" Wide, 1.258 cu yd $10,044
AM/FM Radio
Quick Hitch Lite Installation Kit
Quick Hitch Lite Installation Kit
Hammer/Auxilliary Prop Mono 3.0m Arm
Hammer/Auxilliary Prop Mono 3.0m Arm
AM/FM Radio
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the bottom of this sheet. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please o rder a machine using the Custom Build, Attachments & Options Sections following.
JS145 and JS145 with BLADE
All prices and specifications subject to change without notice. Page 13 of 45 JS145 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9271 JS145 Primary Build Tier 4 Final $133,623
9272 JS145 with Dozer Primary Build Tier 4 Final $145,213
UNDERCARRIAGE for 9271 BASE UNIT (E)
900A114 Long Undercarriage, 78" (1990mm) Gauge, Overall Length: 142" (3605mm) $0
UNDERCARRIAGE for 9272 BASE UNIT with BLADE (E)
900A115 Long Undercarriage, 78" (1990mm) Gauge, Overall Length: 142" (3605mm) $0
TRACK PADS FOR 9271 BASE UNIT (E)
900B521 24" (600mm), Triple Grouser - 44 Link Tracks $2,970
900B522 28" (700mm), Triple Grouser - 44 Link Tracks $3,670
900B594 20" (500mm), GeoGrip Rubber Tracks $14,478
TRACK PADS FOR 9272 BASE UNIT with BLADE (E)
900B526 $2,970
900B527 28" (700mm), Triple Grouser - 44 Link Tracks, 107" Dozer Width $3,669
900B595 $14,478
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C261 Monoboom with 8' 2" (2.5 m) Dipper. No HBCV $1,053
900C264 Monoboom with 9' 10" (3.0 m) Dipper. No HBCV $1,053
TIPPING LINK (E)
900D396 Tipping Link with Lifting Shackle $477
MANUAL PACK (E)
900E2B4 North American Manual Pack $0
24" (600mm), Triple Grouser - 44 Link Tracks, 103" Dozer Width
20" (500mm), GeoGrip Rubber Tracks, 99" Dozer Width
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
JS145 and JS145 with BLADE
All prices and specifications subject to change without notice. Page 14 of 45 JS145 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK - NEW FACTORY BUILT ORDERS ONLY
900KF08 $1,523
900KF09 $1,523
Notes:
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900M108 Hydraulic Quick Hitch $4,590
900M113 Quick Hitch Lite Installation Kit $1,523
900P210 Scavenger Type Precleaner System $269
900R001 AM/FM Radio $169
900R011 Deluxe Seat - Air Suspension and Heated Base $726
900R035 Rainguard - Cab Mounted $484
900R130 Lower Level Windscreen Wiper $256
900S010 Vandal Cover Kit $2,282
900S020 FOPS Level 2 Guard - Front Windshield and Roof $5,618
900S025 Mesh Screen Guard for Front Windshield $1,477
900S034 LED Worklights $814
900S130 Additional Worklights $470
900S140 Amber Beacon - Cab Roof $182
900S253 Rear View Camera $698
900V001 HP32 Hydraulic Oil - for Cold Climate Operation $0
900V002 HP68 Hydraulic Oil - for Hot Climate Operation $0
900X040 Refueling Pump $590
900X381 Shut-off Valves For Auxiliary/Hammer Circuit (For 8' 2" (2.5m) Dipper) $723
900X382 Shut-off Valves For Auxiliary/Hammer Circuit (For 9' 10" (3.0mm) Dipper) $723
900X531 Twin Track Guides $1,404
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
900XB06 24" Wide Bucket, 0.57 cu yd $4,405
900XB07 30" Wide Bucket, 0.73 cu yd $4,610
900XB08 36" Wide Bucket, 0.89 cu yd $4,917
900XB09 42" Wide Bucket, 1.048 cu yd $5,122
900XB05 48" Wide Bucket, 1.2 cu yd $5,481
• For additional factory installed hydraulic pipework options call JCB Product Marketing.
• Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
Hammer/Auxilliary Prop Mono 2.5m Arm
Hammer/Auxilliary Prop Mono 3.0m Arm
• High flow circuit pipework is dual function. The merged circuit adds in up to 70% of the flow from the
second main pump. When operator selects hammer function hydraulic flow is delivered in one direction
to run hammer. Circuit is operated by foot pedal. When auxiliary function is selected the same pump
flow is delivered bi-directionally to run tool. Circuit can be operated by the foot pedal, hand control
buttons or slider depending on code available.• Low flow circuit: separate pipework set delivers servo pump flow bi-directionally to run tool. Operated
by hand control buttons or slider.
JS145 and JS145 with BLADE
All prices and specifications subject to change without notice. Page 15 of 45 JS145 USA Price Page
2018
JCB HYDRAULIC EXCAVATOR
JS160LC andJS160NLC
EFFECTIVE: January 1, 2018
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JS160 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: January 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 86
GPM. Servo pump flow: 5.5 GPM.
OPERATOR'S AREA Climate controlled, noise and vibration isolated by six hydraulically damped resilient mountings
Full opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully
adjustable, high back suspension seat with seatbelt, headrest, armrests, and backrest recline. Two
boom and one mainframe work light.
CONTROLS
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 16' 11" (5.15m). Dippers: 8' 10" (2.7m), 10' 0" (3.05m).
UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Two top and seven
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 2 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 3.4 MPH, low speed is 2.0 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 50 amp output alternator
with 12 volt in-cab supply.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
OPERATING WEIGHT Equipped with standard boom, dipper, 24" track shoes and excavator bucket: apprx. 38,500 lbs.
WARRANTY 3-year / 3,000 hour full coverage warranty (please see the machine warranty certificate for details)
JCB Ecomax 444, 125 net HP at 2200 RPM, Tier 4 Final. Water cooled 4 Cycle, 4 Cylinder, in-
line, common rail, direct injection, variable geometry turbocharged, intercooled diesel. Low
emission engine designed to comply with US EPA emission standard. Dual element air
cleaner. Combined single face radiator and hydraulic oil cooler. Selective catalytic reduction
(SCR) system
Excavator controls are ISO pattern, servo operated, with in cab 7" digital display and change
over control to SAE. Tracks are individually operated by foot pedal or hand lever. Speed
selection via joystick operated switch. Control isolation by gate lock lever at cab entrance and
a console mounted switch. Rearview camera standard.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
All prices and specifications subject to change without notice. Page 17 of 45 JS160 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - YELLOW SERIES
SALES
CODE ITEM JS160NLC
9531 JS160 NLC Primary Build Tier 4 Final ✓
900A427 Narrow Long Undercarriage, 78" (1990mm) Gauge, 155" (3940mm) long ✓
900B574 24" (600mm), Triple Grouser - 43 Link Chain ✓
900C121 Monoboom with 10' 0" (3.05 m) Dipper ✓
900D403 Tipping Link with Lifting Shackle ✓
900E2E6 ✓
900KD09 ✓
900M038 ✓
900R001 ✓
SUGGESTED LIST PRICE $158,699
ATTACHMENTS FOR YELLOW SERIES:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
YWSLA07 ADD 42150X2. 42" BUCKET $5,126
YWSLA08 ADD HT150. MAIN PIN HYDRAULIC THUMB $7,753
YWSLA10 ADD 980/A8251. HYDRAULIC COUPLER $5,197
YWSLA11 ADD 980/B0205. HM120T $21,051
JS160 HYDRAULIC EXCAVATOR
Hammer/Aux Prop. Controls - 3.05M Dipper
North American Manual Pack
AM/FM Radio
Quick Hitch Lite Installation Kit
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please o rder a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice. Page 18 of 45 JS160 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: January 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9530 JS160 LC Primary Build Tier 4 Final $148,720
9531 JS160 NLC Primary Build Tier 4 Final $148,720
UNDERCARRIAGE for 9530 BASE UNIT (E)
900A425 Long Undercarriage, 87" (2200mm) Gauge, 155" (3940mm) long $0
900A426 Extra Heavy Duty Undercarriage, 87" (2200mm) Gauge, 155" (3940mm) long $0
UNDERCARRIAGE for 9531 BASE UNIT (E)
900A427 Extra Heavy Duty Undercarriage, 87" (2200mm) Gauge, 155" (3940mm) long $0
900A432 Narrow Long Undercarriage, 78" (1990mm) Gauge, 155" (3940mm) long for XHD 31.5" Shoe Only $0
TRACK PADS
900B574 24" (600mm), Triple Grouser - 43 Link Chain $2,954
900B575 28" (700mm), Triple Grouser- 43 Link Chain $3,648
900B626 24" (600mm), Triple Grouser - 49 Link Chain, GeoGrip Rubber Tracks $16,962
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C120 Monoboom with 8' 10" (2.7 m) Dipper $1,047
900C121 Monoboom with 10' 0" (3.05 m) Dipper $1,047
TIPPING LINK (E)
900D403 Tipping Link with Lifting Shackle $467
MANUAL PACK (E)
900E2E6 North American Manual Pack $0
JS160 HYDRAULIC EXCAVATOR
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice. Page 19 of 45 JS160 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK - NEW FACTORY BUILT ORDERS ONLY
900KD08 $1,523
900KD09 $1,523
Notes:
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900M101 Hydraulic Quick Hitch $5,649
900M038 Quick Hitch Lite Installation Kit $1,523
900R001 AM/FM Radio $169
900R011 Deluxe Seat - Air Suspension and Heated Base $726
900R035 Rainguard - Cab Mounted $484
900R130 Lower Level Windscreen Wiper $256
900S010 Vandal Cover Kit $2,282
900S020 FOPS Level 2 Guard - Front Windshield and Roof $5,618
900S025 Mesh Screen Guard for Front Windshield $1,477
900S034 LED Worklights $814
900S130 Additional Worklights $470
900S140 Amber Beacon - Cab Roof $182
900S210 Top Around Handrail $1,411
900V005 HP32 Hydraulic Oil - for Cold Climate Operation $0
900V006 HP68 Hydraulic Oil - for Hot Climate Operation $0
900X076 Refueling Pump $590
900X386 Shut-off Valves For Auxiliary/Hammer Circuit (For 8' 10 " (2.7m) Dipper) $723
900X387 Shut-off Valves For Auxiliary/Hammer Circuit (For 10' 0" (3.05m) Dipper) $723
900X532 Twin Track Guides For Heavy Duty Machine $702
900X900 Counterweight with Red and White Chevrons $1,208
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
YWSLA07 ADD 42150X2. 42" BUCKET $5,126
YWSLA08 ADD HT150. MAIN PIN HYDRAULIC THUMB $7,753
YWSLA10 ADD 980/A8251. HYDRAULIC COUPLER $5,197
YWSLA11 ADD 980/B0205. HM120T $21,051
• High flow circuit pipework is dual function. The merged circuit adds in up to 70% of the flow from the second main
pump. When operator selects hammer function hydraulic flow is delivered in one direction to run hammer. Circuit is
operated by foot pedal. When auxiliary function is selected the same pump flow is delivered bi-directionally to run
tool. Circuit can be operated by the foot pedal, hand control buttons or slider depending on code available.
• Low flow circuit: separate pipework set delivers servo pump flow bi-directionally to run tool. Operated by hand
control buttons or slider.
• Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
• For additional factory installed hydraulic pipework options call JCB Product Marketing.
JS160 HYDRAULIC EXCAVATOR
Hammer/Aux Prop. Controls - 2.7M Dipper
Hammer/Aux Prop. Controls - 3.05M Dipper
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice. Page 20 of 45 JS160 USA Price Page
2018
JCB HYDRAULIC EXCAVATOR
JS 190LC and
JS 190NLC
EFFECTIVE: January 1, 2018
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JS190 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: January 1, 2018
STANDARD EQUIPMENT \
ENGINE
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Two variable displacement axial piston pumps yield combined flow of 86 GPM.
Independent servo gear pump delivers 5.5 GPM.
Climate controlled, noise and vibration isolated by six hydraulically damped resilient mountings
and lower windows. Full opening door window. Fan forced fresh air ventilation with defogger and
Fully adjustable, high back suspension seat with seatbelt, headrest, armrests, and backrest recline
Cigarette lighter and ashtray.
CONTROLS
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 16' 11" (5.15m). Dippers: 8' 10" (2.7m), 10' 0" (3.05m).
UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Two top and seven
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil. Two track guides per side.
TRACK DRIVE Full hydrostatic, 2 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 2.6 MPH, low speed is 1.5 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 40 amp output alternator
with 12 volt in-cab supply.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
Equipped w/standard boom, dipper, 24" track shoes and excavator bucket: aprx. 43,750 lbs.
WARRANTY 3-year / 3,000 hour full coverage warranty (please see the machine warranty certificate for details)
JCB Ecomax 444, 125 net HP at 2200 RPM, Tier 4 Final. Water cooled 4 Cycle, 4 Cylinder,
in-line, common rail, direct injection, variable geometry turbocharged, intercooled diesel.
Low emission engine designed to comply with US EPA emission standard. Dual element air
cleaner. Combined single face radiator and hydraulic oil cooler.
Excavator controls are ISO pattern, servo operated, with in cab 7" digital display and change
over control to SAE. Tracks are individually operated by foot pedal or hand lever. Speed
selection via joystick operated switch. Control isolation by gate lock lever at cab entrance
and a console mounted switch. Rearview camera standard.
OPERATOR'S AREA
OPERATING WEIGHT
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
All prices and specifications subject to change without notice. Page 22 of 45 JS190 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 9542ASALES JS190NLC
CODE ITEM 10' DIPPER
9542 JS190 NLC Primary Build Tier 4 Final ✓
900A430 Long Undercarriage, 87" (2200mm), 164" (4170mm) long ✓
900B584 24" (600mm), Triple Grouser - 46 Link Chain ✓
900C121 Monoboom with 10' 0" (3.05 m) Dipper ✓
900D403 Tipping Link with Lifting Shackle ✓
900E2E6 North American Manual Pack ✓
900KD09 ✓
900M038 ✓
900R001 ✓
SUGGESTED LIST PRICE $177,067
ATTACHMENTS FOR PACKAGE BUILD:SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
YWSLA07 ADD 42150X2. 42" BUCKET $5,126
YWSLA08 ADD HT150. MAIN PIN HYDRAULIC THUMB $7,753
YWSLA10 ADD 980/A8251. HYDRAULIC COUPLER $5,197
YWSLA11 ADD 980/B0205. HM120T $21,051
AM/FM Radio
Quick Hitch Lite Installation Kit
Hammer/Aux Prop. Controls - 3.05M Dipper
JS190 HYDRAULIC EXCAVATOR
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please o rder a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice. Page 23 of 45 JS190 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: January 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9541 JS190 LC Primary Build Tier 4 Final $166,816
9542 JS190 NLC Primary Build Tier 4 Final $166,816
UNDERCARRIAGE for 9541 BASE UNIT (E)
900A431 Long Undercarriage, 87" (2200mm), 164" (4170mm) long $0
UNDERCARRIAGE for 9542 BASE UNIT (E)
900A430 Long Undercarriage, 87" (2200mm), 164" (4170mm) long $0
TRACK PADS
900B584 24" (600mm), Triple Grouser - 46 Link Chain $2,954
900B585 28" (700mm), Triple Grouser - 46 Link Chain $4,049
900B627 600mm (24"), Geogrip Rubber Tracks $17,049
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C120 Monoboom with 8' 10" (2.7 m) Dipper $1,047
900C121 Monoboom with 10' 0" (3.05 m) Dipper $1,047
TIPPING LINK (E)
900D403 Tipping Link with Lifting Shackle $467
MANUAL PACK (E)
900E2E6 North American Manual Pack $0
JS190 HYDRAULIC EXCAVATOR
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice. Page 24 of 45 JS190 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA EFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK - NEW FACTORY BUILT ORDERS ONLY
900KD08 $1,523
900KD09 $1,523
Notes:
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900M038 Quick Hitch Lite Installation Kit $1,523
900M101 Hydraulic Quick Hitch $5,649
900R001 AM/FM Radio $169
900R011 Deluxe Seat - Air Suspension and Heated Base $726
900R130 Lower Level Windscreen Wiper $256
900S001 Fire Extinguisher $336
900S010 Vandal Cover Kit $2,282
900S020 FOPS Level 2 Guard - Front Windshield and Roof $5,618
900S025 Mesh Screen Guard for Front Windshield $1,477
900S130 Additional Worklights $470
900S132 Additional Worklights (2 cab lights, 1 counter weight light - FOPS Compatible Only) $470
900S140 Amber Beacon - Cab Roof $182
900V005 HP32 Hydraulic Oil - for Cold Climate Operation $0
900V006 HP68 Hydraulic Oil - for Hot Climate Operation $0
900X076 Refueling Pump $590
900X387 Shut-off Valves For Auxiliary/Hammer Circuit (For 10' 0" (3.05m) Dipper) $723
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
YWSLA07 ADD 42150X2. 42" BUCKET $5,126
YWSLA08 ADD HT150. MAIN PIN HYDRAULIC THUMB $7,753
YWSLA10 ADD 980/A8251. HYDRAULIC COUPLER $5,197
YWSLA11 ADD 980/B0205. HM120T $21,051
• Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
• High flow circuit pipework is dual function. The merged circuit adds in up to 70% of the flow from the second main
pump. When operator selects hammer function hydraulic flow is delivered in one direction to run hammer. Circuit is
operated by foot pedal. When auxiliary function is selected the same pump flow is delivered bi-directionally to run
tool. Circuit can be operated by the foot pedal, hand control buttons or slider depending on code available.
• Low flow circuit: separate pipework set delivers servo pump flow bi-directionally to run tool. Operated by hand
control buttons or slider.
• For additional factory installed hydraulic pipework options call JCB Product Marketing.
JS190 HYDRAULIC EXCAVATOR
Hammer/Aux Prop. Controls - 2.7M Dipper
Hammer/Aux Prop. Controls - 3.05M Dipper
All prices and specifications subject to change without notice. Page 25 of 45 JS190 USA Price Page
2018
JCB HYDRAULIC EXCAVATOR
JS220
EFFECTIVE: January 1, 2018
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JS220 HYDRAULIC EXCAVATOR U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 120
GPM. Servo pump flow: 4.8 GPM.
Climate controlled, noise and vibration isolated by six hydraulically damped resilient mountings
Full opening door window. Fan forced fresh air ventilation with defogger and washer/wiper.
Fully adjustable, high back suspension seat with seatbelt, headrest, armrests and backrest recline.
Two boom and one mainframe work light.
CONTROLS
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No dipper reinforcing
required for hammer operations. Boom: 18' 8" (5.70m). Dipper Arms: 7' 10" (2.40m) or 9' 10"
(3.0m). Electric refueling pump is situated in tool box.
UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X-frame type with flush fitted, heavy duty
swing turret cover and heavy duty undercover. Two top and eight bottom rollers are sealed and lubricated.
Track idler is sealed and lubricated and incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 3 speed, driven by two axial piston motors. Flush fitted heavy duty track motor
guards. Final drives are planetary reduction type with bolt on sprockets. Maximum track speed is
3.4 MPH, low speed is 2.1 MPH. Parking brake is disc type, spring applied, hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 40 amp output alternator with
12 volt in-cab supply.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
OPERATING WEIGHT Equipped w/standard boom, dipper, 32" track shoes and excavator bucket: aprx. 51,000 lbs.
WARRANTY 3-year / 3,000 hour full coverage warranty (please see the machine warranty certificate for details)
JCB Ecomax 448, 173 Net HP at 2000 RPM, Tier 4 Final. 4-cycle, 4-cylinder in line, common rail, direct
injection, variable geometry turbocharged, intercooled diesel. Low emission engine designed to comply
with US EPA emission standard. Dual element air cleaner. Combined single face radiator and hydraulic
oil cooler. Selective Catalytic Reduction (SCR) System.
Excavator controls are ISO pattern, servo operated, with in cab 7" digital display and change over control
to SAE. Tracks are individually operated by foot pedal or hand lever. Speed selection via joystick
operated switch. Control isolation by gate lock lever at cab entrance and a console mounted switch.
Rearview camera standard.
OPERATOR'S AREA
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice. Page 27 of 45 JS220 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - YELLOW SERIES
SALES
CODE JS220
9557 JS220 LC Primary Build Tier 4 Final ✓
900A025 Long Undercarriage, 94" (2390mm), 176" (4460mm) long ✓
900B559 32" (800mm), Triple Grouser - 49 Link Chain ✓
900C402 Monoboom with 9' 10" (3.0 m) Dipper ✓
900D371 Tipping Link with Lifting Shackle ✓
900E2B2 ✓
900KC09 High flow pipework for Hammer/Auxiliary circuits for 9' 10" (3.0 m) dipper ✓
900M040 Hydraulic Quick Hitch Lite Installation Monoboom ✓
900R001 AM/FM Radio ✓
SUGGESTED LIST PRICE $199,488
ATTACHMENTS FOR YELLOW SERIES:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
YWSLA12 ADD 48200X2. 48" BUCKET $6,124
YWSLA13 ADD HT200. MAIN PIN HYDRAULIC THUMB $8,997
YWSLA14 ADD 980/A8252. HYDRAULIC COUPLER $6,071
YWSLA15 ADD 980/B0210. HM180T $26,280
ITEM
JS220 HYDRAULIC EXCAVATOR
North American Manual Pack
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please o rder a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice. Page 28 of 45 JS220 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
BASE MACHINE (E)
9557 JS220 LC Primary Build Tier 4 Final $185,904
UNDERCARRIAGE (E)
900A025 Long Undercarriage, 94" (2390mm), 176" (4460mm) long $0
TRACK PADS (E)
900B504 28" (700mm), Triple Grouser - 49 Link Chain $0
900B559 32" (800mm), Triple Grouser - 49 Link Chain $8,087
900B572 24" (600mm), Triple Grouser - 49 Link Chain, GeoGrip Rubber Tracks $20,761
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C401 Monoboom with 7' 10" (2.4 m) Dipper $1,801
900C402 Monoboom with 9' 10" (3.0 m) Dipper $1,801
TIPPING LINK (E)
900D371 Tipping Link with Lifting Shackle $483
MANUAL PACK (E)
900E2B2 North American Manual Pack $0
ITEM
JS220 HYDRAULIC EXCAVATOR
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice. Page 29 of 45 JS220 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
HYDRAULIC ATTACHMENT PIPEWORK - NEW FACTORY BUILT ORDERS ONLY
900KC08 $1,523
900KC09 $1,523
Notes:
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900M032 Hydraulic Quick Hitch $5,775
900M040 Hydraulic Quick Hitch Lite Installation Monoboom $1,523
900R001 AM/FM Radio $169
900R011 Deluxe Seat - Air Suspension and Heated Base $726
900R130 Lower Level Windscreen Wiper $256
900S001 Fire Extinguisher $336
900S010 Vandal Cover Kit $2,282
900S020 FOPS Level 2 Guard - Front Windshield and Roof $5,618
900S025 Mesh Screen Guard for Front Windshield $1,477
900S130 Additional Worklights $470
900S132 Additional Worklights (2 cab lights, 1 counter weight light - FOPS Compatible Only) $470
900S140 Amber Beacon - Cab Roof $182
900S205 Top Around Handrail $1,895
900V001 HP32 Hydraulic Oil - for Cold Climate Operation $0
900V002 HP68 Hydraulic Oil - for Hot Climate Operation $0
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE LIST
HEAVY DUTY PLATE LIP
YWSLA12 ADD 48200X2. 48" BUCKET $6,124
YWSLA13 ADD HT200. MAIN PIN HYDRAULIC THUMB $8,997
YWSLA14 ADD 980/A8252. HYDRAULIC COUPLER $6,071
YWSLA15 ADD 980/B0210. HM180T $26,280
ITEM
ITEM
JS220 HYDRAULIC EXCAVATOR
High flow pipework for Hammer/Auxiliary circuits for 7' 10" (2.4 m) dipper
High flow pipework for Hammer/Auxiliary circuits for 9' 10" (3.0 m) dipper
• Low flow circuit: separate pipework set delivers servo pump flow bi-directionally to run tool. Operated
by hand control buttons or slider.
• For additional factory installed hydraulic pipework options call JCB Product Marketing.
• Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
• High flow circuit pipework is dual function. The merged circuit adds in up to 70% of the flow from the second main
pump. When operator selects hammer function hydraulic flow is delivered in one direction to run hammer. Circuit is
operated by foot pedal. When auxiliary function is selected the same pump flow is delivered bi-directionally to run
tool. Circuit can be operated by the foot pedal, hand control buttons or slider depending on code available.
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice. Page 30 of 45 JS220 USA Price Page
2018
JCB HYDRAULIC EXCAVATOR
JS 300LC
EFFECTIVE: January 1, 2018
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 132
GPM. Servo pump flow: 4.8 GPM.
OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.
Opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully
adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline. Two boom and
one mainframe work light
CONTROLS
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 20' 4" (6.2m). Dippers: 8' 2" (2.5m), 10'2" (3.1m), 12'2" (3.7m).
UNDERCARRIAGE The undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Twin top and nine
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 2 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 2.9 MPH, low speed is 1.7 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 100 amp output alternator
with 12 volt in-cab supply.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
OPERATING WEIGHT Equipped with standard boom, dipper, 32" track shoes and excavator bucket: apprx. 71,160 lbs.
WARRANTY 3-year / 3,000 hour full coverage warranty (please see the machine warranty certificate for details)
MTU 6R1000, 241 HP at 1,900 RPM. Six-cylinder water cooled common rail direct injection
diesel engine. Low emission engine, EPA Tier 4 Final compliant. Dual element Powercore air
cleaner.
Excavator controls are ISO pattern, servo operated, with in cab 7" digital display and change
over control to SAE. Tracks are individually operated by foot pedal or hand lever. Speed
selection via joystick operated switch. Control isolation by gate lock lever at cab entrance
and a console mounted switch.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
JS300 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 32 of 45 JS300 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - YELLOW SERIES
PACKAGE BUILD CODE:
SALES
CODE ITEM JS300
9017 JS300 LC Primary Build Tier 4 Final ✓
900A003 Long Undercarriage, 2600mm (102") Gauge, 4810mm (189") long ✓
900B013 800mm (32"). Triple Grouser ✓
900C371 ✓
900D010 Tipping Link: Max Capacity Lifting Shackle ✓
900EA67 North American Manual Pack: English ✓
900K294 ✓
900R001 ✓
900R011 ✓
SUGGESTED LIST PRICE $266,074
ATTACHMENTS FOR YELLOW SERIES:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
YWSLA16 ADD 54330X2. 54" BUCKET $8,913
YWSLA17 ADD HT330. MAIN PIN HYDRAULIC THUMB $9,917
YWSLA18 ADD 980/A8254. HYDRAULIC COUPLER $7,641
YWSLA19 ADD 980/B0216. HM270T $38,588
Hammer/Aux/Merged - 10' 2" (3.1m) Dipper
Monoboom, 0 HBCV, 10' 2" (3.1m) Heavy Duty Dipper
AM/FM Radio
Deluxe Seat - Air Suspension And Heated Base
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the bottom of this sheet. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please o rder a machine using the Custom Build, Attachments & Options Sections following.
JS300 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 33 of 45 JS300 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9017 JS300 LC Primary Build Tier 4 Final $256,627
UNDERCARRIAGE (E)
900A003 Long Undercarriage, 2600mm (102") Gauge, 4810mm (189") long $0
TRACK PADS (E)
900B012 700mm(28"), Triple Grouser $4,977
900B013 800mm (32"). Triple Grouser $8,073
900B014 900mm (35"), Triple Grouser $12,019
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C371 Monoboom, 0 HBCV, 10' 2" (3.1m) Heavy Duty Dipper $480
900C372 Monoboom, 0 HBCV, 12' 2" (3.7m) Heavy Duty Dipper $961
TIPPING LINK (E)
900D002 Tipping Link: Max Capacity Lifting Shackle $0
MANUAL PACK (E)
900EA67 North American Manual Pack: English $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
JS300 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 34 of 45 JS300 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK - NEW FACTORY BUILT ORDERS ONLY
900K294 $0
900K295 $0
Notes:
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900M105 Hydraulic Quick Hitch $9,936
900M026 Hydraulic Quick Hitch Lite Installation $1,523
900R001 AM/FM Radio $169
900R011 Deluxe Seat - Air Suspension and Heated Base $726
900R130 Lower Level Windscreen Wiper $256
900S001 Fire Extinguisher $336
900S010 Vandal Cover Kit $2,282
900S020 FOPS Level 2 Guard - Front Windshield and Roof $5,618
900S025 Mesh Screen Guard for Front Windshield $1,477
900S130 Additional Worklights $470
900S132 Additional Worklights (2 cab lights, 1 counter weight light - FOPS Compatible Only) $470
900S140 Amber Beacon - Cab Roof $182
900V001 HP32 Hydraulic Oil - for Cold Climate Operation $0
900V002 HP68 Hydraulic Oil - for Hot Climate Operation $0
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
YWSLA16 ADD 54330X2. 54" BUCKET $8,913
YWSLA17 ADD HT330. MAIN PIN HYDRAULIC THUMB $9,917
YWSLA18 ADD 980/A8254. HYDRAULIC COUPLER $7,641
YWSLA19 ADD 980/B0216. HM270T $38,588
• For additional factory installed hydraulic pipework options call JCB Product Marketing.
• Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
Hammer/Aux/Merged - 10' 2" (3.1m) Dipper
Hammer/Aux/Merged - 12' 2" (3.7m) Dipper
• High flow circuit pipework is dual function. The merged circuit adds in up to 70% of the flow from the
second main pump. When operator selects hammer function hydraulic flow is delivered in one direction
to run hammer. Circuit is operated by foot pedal. When auxiliary function is selected the same pump
flow is delivered bi-directionally to run tool. Circuit can be operated by the foot pedal, hand control
buttons or slider depending on code available.
• Low flow circuit: separate pipework set delivers servo pump flow bi-directionally to run tool. Operated
by hand control buttons or slider.
JS300 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 35 of 45 JS300 USA Price Page
2018
JCB HYDRAULIC EXCAVATOR
JS 330LC
EFFECTIVE: January 1, 2018
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 154
GPM. Servo pump flow: 7.5 GPM.
OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.
Opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully
adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline. Two boom and
one mainframe work light
CONTROLS
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 21' 2" (6.45m). Dippers: 8' 8" (2.63m), 10' 7" (3.23m), 13' 3" (4.03m)
UNDERCARRIAGE The undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Twin top and nine
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 2 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 3.2 MPH, low speed is 1.9 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 100 amp output alternator
with 12 volt in-cab supply.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
OPERATING WEIGHT Equipped with standard boom, dipper, 32" track shoes and excavator bucket: apprx. 75,350 lbs.
WARRANTY 3-year / 3,000 hour full coverage warranty (please see the machine warranty certificate for details)
MTU 6R1000, 281 HP at 1,900 RPM. Six-cylinder water cooled common rail direct injection
diesel engine. Low emission engine, EPA Tier 4 Final compliant. Dual element Powercore air
cleaner.
Excavator controls are ISO pattern, servo operated, with in cab 7" digital display and change
over control to SAE. Tracks are individually operated by foot pedal or hand lever. Speed
selection via joystick operated switch. Control isolation by gate lock lever at cab entrance
and a console mounted switch.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
JS330 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 37 of 45 JS330 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE: 9381ASALES JS330
CODE ITEM Monoboom
9381 JS330 LC Primary Build Tier 4 Final ✓
900A800 Long Undercarriage, 2600mm (102") Gauge, 4810mm (189") Long ✓
900B802 800mm (32"), Triple Grouser ✓
900C882 Monoboom, 0 HBCV, 10' 7" (3.23m) Dipper ✓
900D003 Tipping Link: Max Capacity Lifting Shackle ✓
900EA67 North American Manual Pack: English ✓
900K867 Hammer/Aux/Merged - 10' 7" (3.23m) Dipper ✓
900R001 AM/FM Radio ✓
900R011 ✓
SUGGESTED LIST PRICE $280,465
ATTACHMENTS FOR PACKAGE BUILDS:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS (E)
HEAVY DUTY PLATE LIP
YWSLA16 ADD 54330X2. 54" BUCKET $8,913
YWSLA17 ADD HT330. MAIN PIN HYDRAULIC THUMB $9,917
YWSLA18 ADD 980/A8254. HYDRAULIC COUPLER $7,641
YWSLA19 ADD 980/B0216. HM270T $38,588
Deluxe Seat - Air Suspension And Heated Base
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the bottom of this sheet. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please o rder a machine using the Custom Build, Attachments & Options Sections following.
JS330 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 38 of 45 JS330 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9381 JS330 LC Primary Build Tier 4 Final $272,774
UNDERCARRIAGE (E)
900A800 Long Undercarriage, 2600mm (102") Gauge, 4810mm (189") Long $0
TRACK PADS (E)
900B801 700mm (28"), Triple Grouser $3,495
900B802 800mm (32"), Triple Grouser $5,835
900B803 900mm (35"), Triple Grouser $8,436
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C881 Monoboom, 0 HBCV, 8' 8" (2.63m) Dipper $480
900C882 Monoboom, 0 HBCV, 10' 7" (3.23m) Dipper $961
TIPPING LINK (E)
900D003 Tipping Link: Max Capacity Lifting Shackle $0
MANUAL PACK (E)
900EA67 North American Manual Pack: English $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
JS330 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 39 of 45 JS330 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK - NEW FACTORY BUILT ORDERS ONLY
900K866 $0
900K867 $0
Notes:
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900M105 Hydraulic Quick Hitch $9,936
900M026 Hydraulic Quick Hitch Lite Installation $1,523
900R001 AM/FM Radio $169
900R011 Deluxe Seat - Air Suspension and Heated Base $726
900R130 Lower Level Windscreen Wiper $256
900S001 Fire Extinguisher $336
900S010 Vandal Cover Kit $2,282
900S020 FOPS Level 2 Guard - Front Windshield and Roof $5,618
900S025 Mesh Screen Guard for Front Windshield $1,477
900S130 Additional Worklights $470
900S132 Additional Worklights (2 cab lights, 1 counter weight light - FOPS Compatible Only) $470
900S140 Amber Beacon - Cab Roof $182
900V001 HP32 Hydraulic Oil - for Cold Climate Operation $0
900V002 HP68 Hydraulic Oil - for Hot Climate Operation $0
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
YWSLA16 ADD 54330X2. 54" BUCKET $8,913
YWSLA17 ADD HT330. MAIN PIN HYDRAULIC THUMB $9,917
YWSLA18 ADD 980/A8254. HYDRAULIC COUPLER $7,641
YWSLA19 ADD 980/B0216. HM270T $38,588
• For additional factory installed hydraulic pipework options call JCB Product Marketing.
• Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
Hammer/Aux/Merged - 8' 8" (2.63m) Dipper
• High flow circuit pipework is dual function. The merged circuit adds in up to 70% of the flow from the
second main pump. When operator selects hammer function hydraulic flow is delivered in one direction
to run hammer. Circuit is operated by foot pedal. When auxiliary function is selected the same pump
flow is delivered bi-directionally to run tool. Circuit can be operated by the foot pedal, hand control
buttons or slider depending on code available.
• Low flow circuit: separate pipework set delivers servo pump flow bi-directionally to run tool. Operated
by hand control buttons or slider.
Hammer/Aux/Merged - 10' 7" (3.23m) Dipper
JS330 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 40 of 45 JS330 USA Price Page
2018
JCB HYDRAULIC EXCAVATOR
JS 370LC
EFFECTIVE: January 1, 2018
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
STANDARD EQUIPMENT
ENGINE
HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center
control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 160
GPM. Servo pump flow: 7.5 GPM.
OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.
Opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully
adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline. Two boom and
one mainframe work light
CONTROLS
UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for
hammer operations. Boom: 21' 2" (6.45m). Dippers: 8' 8" (2.63m), 10' 7" (3.23m), 13' 3" (4.03m)
UNDERCARRIAGE The undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage
center cover, engine undercover and travel drive motor, cover and shields. Twin top and nine
bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and
incorporates spring cushion recoil.
TRACK DRIVE Full hydrostatic, 2 speed, driven by two axial piston motors. Motors are guarded in undercarriage
frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.
Maximum track speed is 3.2 MPH, low speed is 1.9 MPH. Parking brake is disc type, spring applied,
hydraulic release.
ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 100 amp output alternator
with 12 volt in-cab supply.
LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and
modernized fleet control.
OPERATING WEIGHT Equipped with standard boom, dipper, 32" track shoes and excavator bucket: apprx. 81,800 lbs.
WARRANTY 3-year / 3,000 hour full coverage warranty (please see the machine warranty certificate for details)
MTU 6R1000, 281 HP at 1,900 RPM. Six-cylinder water cooled common rail direct injection
diesel engine. Low emission engine, EPA Tier 4 Final compliant. Dual element Powercore air
cleaner.
Excavator controls are ISO pattern, servo operated, with in cab 7" digital display and change
over control to SAE. Tracks are individually operated by foot pedal or hand lever. Speed
selection via joystick operated switch. Control isolation by gate lock lever at cab entrance
and a console mounted switch.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - OPTIONS - NEW FACTORY BUILT ORDERSSection 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERSDEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)
JS370 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 42 of 45 JS370 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 1 - PACKAGE BUILD SECTION 1 - YELLOW SERIES
SALES
CODE ITEM JS370
9403 JS370 LC Primary Build Tier 4 Final ✓
900A006 Long Undercarriage, 2600mm (102") Gauge, 4947mm (195") long ✓
900B021 800mm (32") Track Plates ✓
900C157 Monoboom, 0 HBCV, 10' 7" (3.23m) Dipper ✓
900D003 Tipping Link: Max Capacity Lifting Shackle ✓
900EA67 North American Manual Pack: English ✓
900K755 ✓
900R001 ✓
900R011 ✓
SUGGESTED LIST PRICE $296,265
ATTACHMENTS FOR YELLOW SERIES:
SALES U.S.
CODE LIST
EXCAVATOR BUCKETS
YWSLA16 ADD 54330X2. 54" BUCKET $8,913
YWSLA17 ADD HT330. MAIN PIN HYDRAULIC THUMB $9,917
YWSLA18 ADD 980/A8254. HYDRAULIC COUPLER $7,641
YWSLA19 ADD 980/B0216. HM270T $38,588
Hammer/Aux/Merged - 10' 7" (3.23m) Dipper
AM/FM Radio
Deluxe Seat - Air Suspension And Heated Base
Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the bottom of this sheet. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please o rder a machine using the Custom Build, Attachments & Options Sections following.
JS370 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 43 of 45 JS370 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE UNIT (E)
9403 JS370 LC Primary Build Tier 4 Final $288,575
UNDERCARRIAGE (E)
900A006 Long Undercarriage, 2600mm (102") Gauge, 4947mm (195") long $0
TRACK PADS (E)
900B020 700mm (28") Track Plates $3,495
900B021 800mm (32") Track Plates $5,835
900B022 900mm (35") Track Plates $8,435
MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework
900C156 Monoboom, 0 HBCV, 8' 8" (2.63m) Dipper $480
900C157 Monoboom, 0 HBCV, 10' 7" (3.23m) Dipper $961
TIPPING LINK (E)
900D003 Tipping Link: Max Capacity Lifting Shackle $0
MANUAL PACK (E)
900EA67 North American Manual Pack: English $0
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
JS370 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 44 of 45 JS370 USA Price Page
U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: January 1, 2018
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
HYDRAULIC ATTACHMENT PIPEWORK - NEW FACTORY BUILT ORDERS ONLY
900K754 $0
900K755 $0
Notes:
OPTIONS NEW FACTORY BUILT ORDERS ONLY
900M105 Hydraulic Quick Hitch $9,936
900M026 Hydraulic Quick Hitch Lite Installation $1,523
900R001 AM/FM Radio $169
900R011 Deluxe Seat - Air Suspension and Heated Base $726
900R130 Lower Level Windscreen Wiper $256
900S001 Fire Extinguisher $336
900S010 Vandal Cover Kit $2,282
900S020 FOPS Level 2 Guard - Front Windshield and Roof $5,618
900S025 Mesh Screen Guard for Front Windshield $1,477
900S130 Additional Worklights $470
900S132 Additional Worklights (2 cab lights, 1 counter weight light - FOPS Compatible Only) $470
900S140 Amber Beacon - Cab Roof $182
900V001 HP32 Hydraulic Oil - for Cold Climate Operation $0
900V002 HP68 Hydraulic Oil - for Hot Climate Operation $0
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
EXCAVATOR BUCKETS
YWSLA16 ADD 54330X2. 54" BUCKET $8,913
YWSLA17 ADD HT330. MAIN PIN HYDRAULIC THUMB $9,917
YWSLA18 ADD 980/A8254. HYDRAULIC COUPLER $7,641
YWSLA19 ADD 980/B0216. HM270T $38,588
• For additional factory installed hydraulic pipework options call JCB Product Marketing.
• Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.
Hammer/Aux/Merged - 8' 8" (2.63m) Dipper
Hammer/Aux/Merged - 10' 7" (4.03m) Dipper
• High flow circuit pipework is dual function. The merged circuit adds in up to 70% of the flow from the
second main pump. When operator selects hammer function hydraulic flow is delivered in one direction
to run hammer. Circuit is operated by foot pedal. When auxiliary function is selected the same pump
flow is delivered bi-directionally to run tool. Circuit can be operated by the foot pedal, hand control
buttons or slider depending on code available.
• Low flow circuit: separate pipework set delivers servo pump flow bi-directionally to run tool. Operated
by hand control buttons or slider.
JS370 HYDRAULIC EXCAVATOR
All prices and specifications subject to change without notice. Page 45 of 45 JS370 USA Price Page
2018
JCB ACCESS SCISSOR LIFT
S1530E
EFFECTIVE: April 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
S1530E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
STANDARD EQUIPMENT
CHASSIS Dual wheel multi-disk brakes. Non-marking tires. Pothole protection.
Rear recessed charger and power to platform receptacles. Full drive motor protection.
Descent and tilt alarm. Dual flashing beacons with beacon protection. Proportional drive.
PLATFORM Proportional lift. 3ft deck extension with automotive style foot pedal. AC power to platform.
Multiple lanyard attachment points. Full rear gate with toe board. Electronic horn.
Folding rails with quick release pins. Proportional control cradle.
STANDARDS Meets latest legislation updates for ANSI A92 and CSA B354.
Minimum guard rail height of 43.5". Machine load sensing to prevent operation in the event
of an overload situation. Wind speed and side load load force testing. Machine tilt sensing.
ELECTRICAL Four 6 volt, 225 Ah Deep Cycle Plus Series Trojan batteries. GPE charger.
Charger is IP66 rated.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - STANDARD PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 2 of 8 S1530E USD Price Page
S1530E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
SALES
CODE ITEM
A011 S1530E ELECTRIC SCISSOR LIFT
560A003 NORTH AMERICAN REGION
560B015 ENGLISH (US) LANGUAGE PACK
560C004 110V US/ CANADA PLUGS AND SOCKETS
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE
560E001 2WD
SUGGESTED LIST PRICE $18,605
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 8 S1530E USD Price Page
S1530E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: April 1,
2018
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
A011 S1530E ELECTRIC SCISSOR LIFT $18,605
REGION
560A003 NORTH AMERICAN REGION $0
LANGUAGE PACK
560B015 ENGLISH (US) LANGUAGE PACK $0
560B016 FRENCH (CANADA) LANGUAGE PACK $0
560B017 SPANISH (US) LANGUAGE PACK $0
ELECTRICAL REQUIREMENT
560C004 110V US/ CANADA PLUGS AND SOCKETS $0
WHEEL AND TIRE
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE $0
DRIVE
560E001 2WD $0
POWER TO PLATFORM
560M001 NO POWER TO PLATFORM $0
PAINT
560P004 CUSTOM PAINT. MINIMUM 10 MACHINES. PAINT SPEC FORM TO BE COMPLETED. $550
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 8 S1530E USD Price Page
2018
JCB ACCESS SCISSOR LIFT
S1930E
EFFECTIVE: April 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 5 of 8 S1930E USD Price Page
S1930E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
STANDARD EQUIPMENT
CHASSIS Dual wheel multi-disk brakes. Non-marking tires. Pothole protection.
Rear recessed charger and power to platform receptacles. Full drive motor protection.
Descent and tilt alarm. Dual flashing beacons with beacon protection. Proportional drive.
PLATFORM Proportional lift. 3ft deck extension with automotive style foot pedal. AC power to platform.
Multiple lanyard attachment points. Full rear gate with toe board. Electronic horn.
Folding rails with quick release pins. Proportional control cradle.
STANDARDS Meets latest legislation updates for ANSI A92 and CSA B354.
Minimum guard rail height of 43.5". Machine load sensing to prevent operation in the event
of an overload situation. Wind speed and side load load force testing. Machine tilt sensing.
ELECTRICAL Four 6 volt, 225 Ah Deep Cycle Plus Series Trojan batteries. GPE charger.
Charger is IP66 rated.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - STANDARD PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 6 of 8 S1930E USD Price Page
S1930E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE:
SALES
CODE ITEM
A012 S1930E ELECTRIC SCISSOR LIFT
560A003 NORTH AMERICAN REGION
560B015 ENGLISH (US) LANGUAGE PACK
560C004 110V US/ CANADA PLUGS AND SOCKETS
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE
560E001 2WD
SUGGESTED LIST PRICE $19,070
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 7 of 8 S1930E USD Price Page
S1930E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: April 1,
2018
SECTION 1 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
A012 S1930E ELECTRIC SCISSOR LIFT $19,070
REGION
560A003 NORTH AMERICAN REGION $0
LANGUAGE PACK
560B015 ENGLISH (US) LANGUAGE PACK $0
560B016 FRENCH (CANADA) LANGUAGE PACK $0
560B017 SPANISH (US) LANGUAGE PACK $0
ELECTRICAL REQUIREMENT
560C004 110V US/ CANADA PLUGS AND SOCKETS $0
WHEEL AND TIRE
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE $0
DRIVE
560E001 2WD $0
POWER TO PLATFORM
560M001 NO POWER TO PLATFORM $0
PAINT
560P004 CUSTOM PAINT. MINIMUM 10 MACHINES. PAINT SPEC FORM TO BE COMPLETED. $550
Please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 2 or 3.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 8 of 8 S1930E USD Price Page
2018
JCB ACCESS SCISSOR LIFT
S2032E
EFFECTIVE: April 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
S2032E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
STANDARD EQUIPMENT
CHASSIS Dual wheel multi-disk brakes. Non-marking tires. Pothole protection.
Rear recessed charger and power to platform receptacles. Full drive motor protection.
Descent and tilt alarm. Dual flashing beacons with beacon protection. Proportional drive.
PLATFORM Proportional lift. 3ft deck extension with automotive style foot pedal. AC power to platform.
Multiple lanyard attachment points. Full rear gate with toe board. Electronic horn.
Folding rails with quick release pins. Proportional control cradle.
STANDARDS Meets latest legislation updates for ANSI A92 and CSA B354.
Minimum guard rail height of 43.5". Machine load sensing to prevent operation in the event
of an overload situation. Wind speed and side load load force testing. Machine tilt sensing.
ELECTRICAL Four 6 volt, 225 Ah Deep Cycle Plus Series Trojan batteries. GPE charger.
Charger is IP66 rated.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - STANDARD PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 2 of 8 S2032E USD Price Page
S2032E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE:
SALES
CODE ITEM
A013 S2032E ELECTRIC SCISSOR LIFT
560A003 NORTH AMERICAN REGION
560B015 ENGLISH (US) LANGUAGE PACK
560C004 110V US/ CANADA PLUGS AND SOCKETS
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE
560E001 2WD
SUGGESTED LIST PRICE $22,093
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 8 S2032E USD Price Page
S2032E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: April 1,
2018
SECTION 1 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
A013 S2032E ELECTRIC SCISSOR LIFT $22,093
REGION
560A003 NORTH AMERICAN REGION $0
LANGUAGE PACK
560B015 ENGLISH (US) LANGUAGE PACK $0
560B016 FRENCH (CANADA) LANGUAGE PACK $0
560B017 SPANISH (US) LANGUAGE PACK $0
ELECTRICAL REQUIREMENT
560C004 110V US/ CANADA PLUGS AND SOCKETS $0
WHEEL AND TIRE
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE $0
DRIVE
560E001 2WD $0
POWER TO PLATFORM
560M001 NO POWER TO PLATFORM $0
PAINT
560P004 CUSTOM PAINT. MINIMUM 10 MACHINES. PAINT SPEC FORM TO BE COMPLETED. $550
Please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 2 or 3.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 8 S2032E USD Price Page
2018
JCB ACCESS SCISSOR LIFT
S2632E
EFFECTIVE: April 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 5 of 8 S2632E USD Price Page
S2632E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
STANDARD EQUIPMENT
CHASSIS Dual wheel multi-disk brakes. Non-marking tires. Pothole protection.
Rear recessed charger and power to platform receptacles. Full drive motor protection.
Descent and tilt alarm. Dual flashing beacons with beacon protection. Proportional drive.
PLATFORM Proportional lift. 3ft deck extension with automotive style foot pedal. AC power to platform.
Multiple lanyard attachment points. Full rear gate with toe board. Electronic horn.
Folding rails with quick release pins. Proportional control cradle.
STANDARDS Meets latest legislation updates for ANSI A92 and CSA B354.
Minimum guard rail height of 43.5". Machine load sensing to prevent operation in the event
of an overload situation. Wind speed and side load load force testing. Machine tilt sensing.
ELECTRICAL Four 6 volt, 225 Ah Deep Cycle Plus Series Trojan batteries. GPE charger.
Charger is IP66 rated.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - STANDARD PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 6 of 8 S2632E USD Price Page
S2632E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE:
SALES
CODE ITEM
A014 S2632E ELECTRIC SCISSOR LIFT
560A003 NORTH AMERICAN REGION
560B015 ENGLISH (US) LANGUAGE PACK
560C004 110V US/ CANADA PLUGS AND SOCKETS
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE
560E001 2WD
SUGGESTED LIST PRICE $27,674
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 7 of 8 S2632E USD Price Page
S2632E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: April 1,
2018
SECTION 1 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
A014 S2632E ELECTRIC SCISSOR LIFT $27,674
REGION
560A003 NORTH AMERICAN REGION $0
LANGUAGE PACK
560B015 ENGLISH (US) LANGUAGE PACK $0
560B016 FRENCH (CANADA) LANGUAGE PACK $0
560B017 SPANISH (US) LANGUAGE PACK $0
ELECTRICAL REQUIREMENT
560C004 110V US/ CANADA PLUGS AND SOCKETS $0
WHEEL AND TIRE
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE $0
DRIVE
560E001 2WD $0
POWER TO PLATFORM
560M001 NO POWER TO PLATFORM $0
PAINT
560P004 CUSTOM PAINT. MINIMUM 10 MACHINES. PAINT SPEC FORM TO BE COMPLETED. $550
Please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 2 or 3.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 8 of 8 S2632E USD Price Page
2018
JCB ACCESS SCISSOR LIFT
S2046E
EFFECTIVE: April 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
S2046E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
STANDARD EQUIPMENT
CHASSIS Dual wheel multi-disk brakes. Non-marking tires. Pothole protection.
Rear recessed charger and power to platform receptacles. Full drive motor protection.
Descent and tilt alarm. Dual flashing beacons with beacon protection. Proportional drive.
PLATFORM Proportional lift. 3ft deck extension with automotive style foot pedal. AC power to platform.
Multiple lanyard attachment points. Full rear gate with toe board. Electronic horn.
Folding rails with quick release pins. Proportional control cradle.
STANDARDS Meets latest legislation updates for ANSI A92 and CSA B354.
Minimum guard rail height of 43.5". Machine load sensing to prevent operation in the event
of an overload situation. Wind speed and side load load force testing. Machine tilt sensing.
ELECTRICAL Four 6 volt, 225 Ah Deep Cycle Plus Series Trojan batteries. GPE charger.
Charger is IP66 rated.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - STANDARD PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 2 of 16 S2046E USD Price Page
S2046E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE:
SALES
CODE ITEM
A015 S2046E ELECTRIC SCISSOR LIFT
560A003 NORTH AMERICAN REGION
560B015 ENGLISH (US) LANGUAGE PACK
560C004 110V US/ CANADA PLUGS AND SOCKETS
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE
560E001 2WD
SUGGESTED LIST PRICE $25,581
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 16 S2046E USD Price Page
S2046E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: April 1,
2018
SECTION 1 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
A015 S2046E ELECTRIC SCISSOR LIFT $25,581
REGION
560A003 NORTH AMERICAN REGION $0
LANGUAGE PACK
560B015 ENGLISH (US) LANGUAGE PACK $0
560B016 FRENCH (CANADA) LANGUAGE PACK $0
560B017 SPANISH (US) LANGUAGE PACK $0
ELECTRICAL REQUIREMENT
560C004 110V US/ CANADA PLUGS AND SOCKETS $0
WHEEL AND TIRE
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE $0
DRIVE
560E001 2WD $0
POWER TO PLATFORM
560M001 NO POWER TO PLATFORM $0
PAINT
560P004 CUSTOM PAINT. MINIMUM 10 MACHINES. PAINT SPEC FORM TO BE COMPLETED. $550
Please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 2 or 3.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 16 S2046E USD Price Page
2018
JCB ACCESS SCISSOR LIFT
S2646E
EFFECTIVE: April 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 5 of 16 S2646E USD Price Page
S2646E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
STANDARD EQUIPMENT
CHASSIS Dual wheel multi-disk brakes. Non-marking tires. Pothole protection.
Rear recessed charger and power to platform receptacles. Full drive motor protection.
Descent and tilt alarm. Dual flashing beacons with beacon protection. Proportional drive.
PLATFORM Proportional lift. 3ft deck extension with automotive style foot pedal. AC power to platform.
Multiple lanyard attachment points. Full rear gate with toe board. Electronic horn.
Folding rails with quick release pins. Proportional control cradle.
STANDARDS Meets latest legislation updates for ANSI A92 and CSA B354.
Minimum guard rail height of 43.5". Machine load sensing to prevent operation in the event
of an overload situation. Wind speed and side load load force testing. Machine tilt sensing.
ELECTRICAL Four 6 volt, 225 Ah Deep Cycle Plus Series Trojan batteries. GPE charger.
Charger is IP66 rated.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - STANDARD PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 6 of 16 S2646E USD Price Page
S2646E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE:
SALES
CODE ITEM
A016 S2646E ELECTRIC SCISSOR LIFT
560A003 NORTH AMERICAN REGION
560B015 ENGLISH (US) LANGUAGE PACK
560C004 110V US/ CANADA PLUGS AND SOCKETS
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE
560E001 2WD
SUGGESTED LIST PRICE $28,605
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 7 of 16 S2646E USD Price Page
S2646E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: April 1,
2018
SECTION 1 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
A016 S2646E ELECTRIC SCISSOR LIFT $28,605
REGION
560A003 NORTH AMERICAN REGION $0
LANGUAGE PACK
560B015 ENGLISH (US) LANGUAGE PACK $0
560B016 FRENCH (CANADA) LANGUAGE PACK $0
560B017 SPANISH (US) LANGUAGE PACK $0
ELECTRICAL REQUIREMENT
560C004 110V US/ CANADA PLUGS AND SOCKETS $0
WHEEL AND TIRE
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE $0
DRIVE
560E001 2WD $0
POWER TO PLATFORM
560M001 NO POWER TO PLATFORM $0
PAINT
560P004 CUSTOM PAINT. MINIMUM 10 MACHINES. PAINT SPEC FORM TO BE COMPLETED. $550
Please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 2 or 3.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 8 of 16 S2646E USD Price Page
2018
JCB ACCESS SCISSOR LIFT
S3246E
EFFECTIVE: April 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 9 of 16 S3246E USD Price Page
S3246E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
STANDARD EQUIPMENT
CHASSIS Dual wheel multi-disk brakes. Non-marking tires. Pothole protection.
Rear recessed charger and power to platform receptacles. Full drive motor protection.
Descent and tilt alarm. Dual flashing beacons with beacon protection. Proportional drive.
PLATFORM Proportional lift. 3ft deck extension with automotive style foot pedal. AC power to platform.
Multiple lanyard attachment points. Full rear gate with toe board. Electronic horn.
Folding rails with quick release pins. Proportional control cradle.
STANDARDS Meets latest legislation updates for ANSI A92 and CSA B354.
Minimum guard rail height of 43.5". Machine load sensing to prevent operation in the event
of an overload situation. Wind speed and side load load force testing. Machine tilt sensing.
ELECTRICAL Four 6 volt, 240 Ah Deep Cycle Plus Series Trojan batteries. GPE charger.
Charger is IP66 rated.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - STANDARD PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 10 of 16 S3246E USD Price Page
S3246E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE:
SALES
CODE ITEM
A017 S3246E ELECTRIC SCISSOR LIFT
560A003 NORTH AMERICAN REGION
560B015 ENGLISH (US) LANGUAGE PACK
560C004 110V US/ CANADA PLUGS AND SOCKETS
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE
560E001 2WD
SUGGESTED LIST PRICE $36,047
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 11 of 16 S3246E USD Price Page
S3246E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: April 1,
2018
SECTION 1 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
A017 S3246E ELECTRIC SCISSOR LIFT $36,047
REGION
560A003 NORTH AMERICAN REGION $0
LANGUAGE PACK
560B015 ENGLISH (US) LANGUAGE PACK $0
560B016 FRENCH (CANADA) LANGUAGE PACK $0
560B017 SPANISH (US) LANGUAGE PACK $0
ELECTRICAL REQUIREMENT
560C004 110V US/ CANADA PLUGS AND SOCKETS $0
WHEEL AND TIRE
WHEEL AND TIRENON MARKING TIRES INDOOR/ OUTDOOR USE $0
DRIVE
560E001 2WD $0
POWER TO PLATFORM
560M001 NO POWER TO PLATFORM $0
PAINT
560P004 CUSTOM PAINT. MINIMUM 10 MACHINES. PAINT SPEC FORM TO BE COMPLETED. $550
Please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 2 or 3.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 12 of 16 S3246E USD Price Page
2018
JCB ACCESS SCISSOR LIFT
S4046E
EFFECTIVE: April 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
All prices and specifications subject to change without notice page 13 of 16 S4046E USD Price Page
S4046E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
STANDARD EQUIPMENT
CHASSIS Dual wheel multi-disk brakes. Non-marking tires. Pothole protection.
Rear recessed charger and power to platform receptacles. Full drive motor protection.
Descent and tilt alarm. Dual flashing beacons with beacon protection. Proportional drive.
PLATFORM Proportional lift. 3ft deck extension with automotive style foot pedal. AC power to platform.
Multiple lanyard attachment points. Full rear gate with toe board. Electronic horn.
Folding rails with quick release pins. Proportional control cradle.
STANDARDS Meets latest legislation updates for ANSI A92 and CSA B354.
Minimum guard rail height of 43.5". Machine load sensing to prevent operation in the event
of an overload situation. Wind speed and side load load force testing. Machine tilt sensing.
ELECTRICAL Four 12 volt, 150 Ah Deep Cycle Plus Series Trojan batteries. GPE charger.
Charger is IP66 rated.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - STANDARD PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 14 of 16 S4046E USD Price Page
S4046E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE:
SALES
CODE ITEM
A018 S4046E ELECTRIC SCISSOR LIFT
560A003 NORTH AMERICAN REGION
560B015 ENGLISH (US) LANGUAGE PACK
560C004 110V US/ CANADA PLUGS AND SOCKETS
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE
560E001 2WD
SUGGESTED LIST PRICE $46,977
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 15 of 16 S4046E USD Price Page
S4046E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: April 1,
2018
SECTION 1 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
A018 S4046E ELECTRIC SCISSOR LIFT $46,977
REGION
560A003 NORTH AMERICAN REGION $0
LANGUAGE PACK
560B015 ENGLISH (US) LANGUAGE PACK $0
560B016 FRENCH (CANADA) LANGUAGE PACK $0
560B017 SPANISH (US) LANGUAGE PACK $0
ELECTRICAL REQUIREMENT
560C004 110V US/ CANADA PLUGS AND SOCKETS $0
WHEEL AND TIRE
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE $0
DRIVE
560E001 2WD $0
POWER TO PLATFORM
560M001 NO POWER TO PLATFORM $0
PAINT
560P004 CUSTOM PAINT. MINIMUM 10 MACHINES. PAINT SPEC FORM TO BE COMPLETED. $550
Please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 2 or 3.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 16 of 16 S4046E USD Price Page
2018
JCB ACCESS SCISSOR LIFT
S4550E
EFFECTIVE: April 1, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LIST
in U.S. Dollars
S4550E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
STANDARD EQUIPMENT
CHASSIS Dual wheel multi-disk brakes. Non-marking tires. Pothole protection.
Rear recessed charger and power to platform receptacles. Full drive motor protection.
Descent and tilt alarm. Dual flashing beacons with beacon protection. Proportional drive.
PLATFORM Proportional lift. 3ft deck extension with automotive style foot pedal. AC power to platform.
Multiple lanyard attachment points. Full rear gate with toe board. Electronic horn.
Folding rails with quick release pins. Proportional control cradle.
STANDARDS Meets latest legislation updates for ANSI A92 and CSA B354.
Minimum guard rail height of 43.5". Machine load sensing to prevent operation in the event
of an overload situation. Wind speed and side load load force testing. Machine tilt sensing.
ELECTRICAL Four 12 volt, 150 Ah Deep Cycle Plus Series Trojan batteries. GPE charger.
Charger is IP66 rated.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - STANDARD PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 2 of 4 S4550E USD Price Page
S4550E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: April 1, 2018
SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS
PACKAGE BUILD CODE:
SALES
CODE ITEM
A019 S4550E ELECTRIC SCISSOR LIFT
560A003 NORTH AMERICAN REGION
560B015 ENGLISH (US) LANGUAGE PACK
560C004 110V US/ CANADA PLUGS AND SOCKETS
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE
560E001 2WD
SUGGESTED LIST PRICE $62,791
Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 4 S4550E USD Price Page
S4550E ELECTRIC SCISSOR LIFT U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
EFFECTIVE: April 1,
2018
SECTION 1 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE (E)
A019 S4550E ELECTRIC SCISSOR LIFT $62,791
REGION
560A003 NORTH AMERICAN REGION $0
LANGUAGE PACK
560B015 ENGLISH (US) LANGUAGE PACK $0
560B016 FRENCH (CANADA) LANGUAGE PACK $0
560B017 SPANISH (US) LANGUAGE PACK $0
ELECTRICAL REQUIREMENT
560C004 110V US/ CANADA PLUGS AND SOCKETS $0
WHEEL AND TIRE
560D001 NON MARKING TIRES INDOOR/ OUTDOOR USE $0
DRIVE
560E001 2WD $0
POWER TO PLATFORM
560M001 NO POWER TO PLATFORM $0
DRIVE
560P004 CUSTOM PAINT. MINIMUM 10 MACHINES. PAINT SPEC FORM TO BE COMPLETED. $550
Please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 2 or 3.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 4 S4550E USD Price Page
JCB ARTICULATED TELESCOPIC HANDLER
TM320 ConstructionTIER 4 FINAL
ISSUE 1.0
EFFECTIVE: JANUARY 01, 2018
CHANGES TO SPECIFICATIONS AND/OR PRICES MAY OCCUR.
PLEASE REFER TO THE PRODUCT MANAGER FOR UPDATES
JCB, Inc. North American
MACHINE PRICE LISTin U.S. Dollars
TM320C Tier 4 FINAL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GAEFFECTIVE: JANUARY 01, 2018
STANDARD EQUIPMENT
GENERAL
ENGINE
TRANSMISSION
BRAKES
ELECTRICAL
INSTRUMENTS
CAB UNIT
TIRES Michelin 460/70 R24 Bibload Tires
TELESCOPIC BOOM
CARRIAGE
HYDRAULICS
Audible and visual warning system, tachometer, hourmeter, fuel gauge, coolant temp gauge, warning
lights for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp, trans oil
pressure, parking brake, lift-extend and tilt on single lever control.
Meets SAE J231 FOPS/SAE J1040 ROPS requirements, air suspension seat with seat belt, tilt
steering column, air conditioning and heater with defroster vent system, windshield wipers and
washers for front/rear and roof glass, rear view mirror, front worklights, horn, in cab storage, backup
alarm meets SAE J994, operators manual, deluxe mirrors
Two section, 17ft 1in lift height with hydraulic parallel lift, 6390 lbs maximum lift capacity. With
hydraulic boom suspension
48" wide, "Q-Fit" for easy attachment changes, includes 2" fork shaft.
Cab Mounted Single lever Servo joystick with "loader" pattern control and proportional boom extend
and auxiliary functions, Piston Pump load sensing system with 37 GPM, single auxiliary hydraulic
service. Includes pressure release
12 volt, Meets IP67 water ingress test standard, 110 amp alternator, 900 CCA, 92 AH low maintenance
battery.
Two piece unitized mainframe with rigid frame and componentized driveline.
TIER 4 FINAL JCB EcoMAX turbo intercooled, 125 hp. Dual element air cleaner, spin-on fuel filter,
fuel/water separator, thermo start assist, anti-freeze protection to -35 deg F.
JCB 4 speed autoshift transmission, Powershift direction change, 24 mph travel speed, 12 inch torque
converter, transmission disconnect on foot brake.
Internal mounted inboard on front axle, multi disc, oil immersed, servo assisted hydraulic actuation,
self adjusting, independent disc type parking brake with brake on alarm and transmission disconnect.
SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - ATTACHMENTS - NEW FACTORY BUILT ORDERSSection 4 - OPTIONS - NEW FACTORY BUILT ORDERS
All prices and specifications subject to change without notice page 2 of 6 TM 320 USD Issue 4
TM320C Tier 4 FINAL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SALES PACKAGE BUILD CODE:
CODE ITEM
320C TM320 articulated telescopic handler ����
320W TM320 wastemaster articulated telescopic handler ����
406A172 Michlen Bibload 460/70 R24 hard surface tire ����
406A182 SG Revolution SE 13.0 R24 (Solid Cusion Tires ����
406B124 Cab with left hand door - deluxe trim A/C and heater, mechanical suspension seat, full instrumentation and adjustable steer column600 ���� ����
406C004 JCB Q-Fit carriage with fork shaft and hydraulic disconnect 673 ���� ����
406D200 Axles - torque proportioning in the front and rear 702 ���� ����
406E001 Hydraulics, single auxiliary circuit, with pressure release - Q-Fit 702 ���� ����
406F257 Operators manual - American English Language 2000 ���� ����
406P001 SRS smoothride 2000 ���� ����
406P145 Block Heater 110V ���� ����
406R222 Removal - LH forward/reverse lever ���� ����
406P004 Hydraulic reversing fan ����
SUGGESTED LIST PRICE 132,680$ 161,745$
EFFECTIVE: JANUARY 01, 2018
SECTION 1 - PACKAGE BUILD
TM320C TM320W
Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 3. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.
All prices and specifications subject to change without notice page 3 of 6 TM 320 USD Issue 4
TM320C Tier 4 FINAL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
BASE MACHINE
320C TM320 articulated telescopic handler $86,014
320W TM320 wastemaster articulated telescopic handler $89,006
TIRES
406A172 Michlen Bibload 460/70 R24 hard surface tire $6,400
406A175 Michelin XHA 15.5 R25 $11,816
406A176 Michelin XTLA 15.5 R25 $10,634
406A182 SG Revolution SE 13.0 R24 (Solid Cusion Tires $30,749
OPERATOR'S AREA
406B124 Cab with left hand door - deluxe trim A/C and heater, mechanical suspension seat, full instrumentation and adjustable steer column$15,755
CARRIAGE
406C004 JCB Q-Fit carriage with fork shaft and hydraulic disconnect $3,446
406C007 JCB Wheel Loader Quick hitch (ISO Volvo) $4,825
406C008 No quick hitch $492
AXLE AND DIFFERENTIAL
406D200 Axles - torque proportioning in the front and rear $10,093
406D202 Axles - limited slip differential in the front axle and torque proportioning in the rear $10,585
AUXILIARY HYDRAULICS
406E001 Hydraulics, single auxiliary circuit, with pressure release - Q-Fit $7,976
406E003 Hydraulics, single auxiliary circuit, with pressure release - JCB Wheeleed Loader quick hitch $7,976
406E004 Hydraulics, single auxiliary circuit, with pressure release - NO QUICK HITCH $7,976
406E005 Hydraulics, twin auxiliary circuit, with pressure release - Q-Fit $8,705
406E007 Hydraulics, twin auxiliary circuit, with pressure release - JCB Wheeleed Loader quick hitch $8,705
406E008 Hydraulics, twin auxiliary circuit, with pressure release - NO QUICK HITCH $8,705
OPERATORS MANUAL
406F235 Operators manual - French Canadian Language $0
406F257 Operators manual - American English Language $0
EFFECTIVE:
JANUARY 01, 2018
If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Attachments and/or Options from Section 3 or 4.
JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.
All prices and specifications subject to change without notice page 4 of 6 TM 320 USD Issue 4
TM320C Tier 4 FINAL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
OPERATOR'S COMPARTMENT OPTIONS
406R002 Air suspension seat $1,155
406R005 Sliding door glass $609
406R008 Rear view camera and in cab screen $1,859
406R222 Removal - LH forward/reverse lever -$200
406R006 Toolbox $335
406R201 In cab storage box with padded lid $302
ELECTRICAL OPTIONS
406N001 Amber beacon $126
406N006 Boom work lights - 2 $345
406N008 Work lights 4 front and rear $567
406P145 Block Heater 110V $255
GUARD OPTIONS
406G001 Belly guard Front $955
406G002 Head light guard $285
406G004 Front Chassis cover plate $168
406G005 Screen and roof guard $1,869
406G007 Front bumper $654
HYDRAULIC OPTIONS
406P001 SRS smoothride $3,075
406P004 Reversing fan $1,803
EFFECTIVE:
JANUARY 01, 2018
Select Optional Equipment as desired within limitations if indicated.
All prices and specifications subject to change without notice page 5 of 6 TM 320 USD Issue 4
TM320C Tier 4 FINAL U.S. DOLLAR
PRICE PAGES
F.O.B.
SAVANNAH, GA
SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:
SALES U.S.
CODE ITEM LIST
ATTACHMENTS
406H015 1.3 cu yd bucket with BoCE 90" wide - Q-Fit mount $2,412
406H018 2.75 cu yd bucket with BoCE, 96" wide -Q-Fit mount (980/A9936) $3,938
406H019 1.90 cu yd Multi shovel with top grab 96" wide -Q-Fit mount (980/B0043) $6,647
FORK SETS
406H005 42" pallet forks - for Q-Fit carriage $1,040
406H006 48" pallet forks - for Q-Fit carriage $1,165
406H008 ITA forks 42" and frame, for Q-Fit carriage $2,216
406H009 ITA forks 48" and frame, for Q-Fit carriage $2,340
EFFECTIVE:
JANUARY 01, 2018
Select Attachments as desired within limitations if indicated.
All prices and specifications subject to change without notice page 6 of 6 TM 320 USD Issue 4
Description of Item Make / Model NumberDelivery (days
after award)
Price List
Page# % off Disc
Backhoe Loader JCB 3CX Compact 90-180 Days 274 25%
Backhoe Loader JCB 3CX 90-180 Days 290 25%
Backhoe Loader JCB 3CX-14 90-180 Days 302 25%
Backhoe Loader JCB 3CX-14 Super 90-180 Days 311 25%
Backhoe Loader JCB 3CX-15 Super 90-180 Days 332 25%
Backhoe Loader JCB 4CX-14 Super 90-180 Days 346 25%
Backhoe Loader JCB 4CX-15 Super 90-180 Days 358 25%
Skid Steer Loaders JCB 210 90-180 Days 36 20%
Skid Steer Loaders JCB 215 90-180 Days 46 20%
Skid Steer Loaders JCB 250 90-180 Days 56 20%
Skid Steer Loaders JCB 270 90-180 Days 67 20%
Skid Steer Loaders JCB 300 90-180 Days 78 20%
Compact Track Loader JCB 210T 90-180 Days 102 20%
Compact Track Loader JCB 215T 90-180 Days 122 20%
Compact Track Loader JCB 250T 90-180 Days 132 20%
Compact Track Loader JCB 270T 90-180 Days 144 20%
Compact Track Loader JCB 300T 90-180 Days 157 20%
Teleskid (Wheeled) JCB 3TS-8W 90-180 Days 6 20%
Teleskid (Tracked) JCB 3TS-8T 90-180 Days 10 20%
Excavator JCB JS 131 90-180 Days 462 20%
Excavator (Zero Tail Swing) JCB JZ141D 90-180 Days 467 20%
Excavator JCB JS 145 90-180 Days 472 20%
Excavator JCB JS 160 90-180 Days 477 20%
Excavator JCB JS 190 90-180 Days 482 20%
STS - JCB Pricing Structure and Table contents
Excavator JCB 220X 90-180 Days 1 20%
Excavator JCB JS 300 90-180 Days 492 20%
Excavator JCB JS 330 90-180 Days 497 20%
Excavator JCB JS 370 90-180 Days 502 20%
Wheeled Excavator (Hydradig) JCB 110W 90-180 Days 456 20%
Compact Excavator 18Z 90-180 Days 386 20%
Compact Excavator 19C 90-180 Days 392 20%
Compact Excavator JCB 8029 CTS 90-180 Days 451 20%
Compact Excavator JCB 45Z-1 90-180 Days 397 20%
Compact Excavator JCB 48Z-1 90-180 Days 403 20%
Compact Excavator JCB 55Z-1 90-180 Days 409 20%
Compact Excavator JCB 57C-1 90-180 Days 415 20%
Compact Excavator JCB 67C-1 90-180 Days 420 20%
Compact Excavator JCB 85Z-1 90-180 Days 425 20%
Compact Excavator JCB 86C-1 90-180 Days 431 20%
Compact Excavator JCB 90Z-1 90-180 Days 441 20%
Compact Excavator JCB 100C-1 90-180 Days 446 20%
Wheel Loader JCB 407 90-180 Days 213 25%
Wheel Loader JCB 409 90-180 Days 226 25%
Wheel Loader JCB 411HT 90-180 Days 225 25%
Wheel Loader JCB 417HT 90-180 Days 231 25%
Wheel Loader JCB 427ZX 90-180 Days 243 25%
Wheel Loader JCB 427HT 90-180 Days 237 25%
Wheel Loader JCB 437ZX 90-180 Days 256 25%
Wheel Loader JCB 437HT 90-180 Days 249 25%
Wheel Loader JCB 457HT 90-180 Days 262 25%
Wheel Loader JCB 457ZX 90-180 Days 268 25%
Scissor Lift JCB S1930E 90-180 Days 511 35%
Scissor Lift JCB S2032E 90-180 Days 515 35%
Scissor Lift JCB S2046E 90-180 Days 523 35%
Scissor Lift JCB S2632E 90-180 Days 519 35%
Scissor Lift JCB S2646E 90-180 Days 527 35%
Scissor Lift JCB S3246E 90-180 Days 531 35%
Scissor Lift JCB S4550E 90-180 Days 539 35%
TeleMaster Wheel Loader TM320C 90-180 Days 543 20%