The Kavery Engineering College,

Mecheri, Salem District.DEPARTMENT RECORDSREC.NO : MECH/QP-04

REV NO : 00

DEPARTMENT B.E. MECHANICAL ENGINEERINGDATE : 03/06/2013

PAGE : 1 OF 9

TEACHING PLAN

Academic Year 2012-2014

Semester III (Regulations 2008)

ME2203Kinematics of MachineryII Year MECHHours/Week

LTPC

3104

Miss.E.Jamuna Assistant Professor Mechanical Department

UnitLecture No.Lecture TopicAuthor of the BookPage No.Content

No.Teaching AidsDate Taught

FromTo

ITITLE OF THE UNIT - BASICS OF MECHANISMS

1Definitions,Link, Kinematic Pair, Kinematic chain, Mechanism &Machine,Degrees of Freedom for plane mechanism, Kutzbachs Equation, Grashofs LawJaya Kumar

Kinematics of Machinery1.11.321.1,1.2,1.3,1.4,1.5,1.6,1.7, 1.8,1.9,1.10,1.11, 1.121.Black Board

2.Power Point

2Inversion of Mechanisms Fourbar Chain & Inversion of Four bar chain Beam Engine, Coupling Road, Watts steam engine mechanism.Jaya Kumar

Kinematics of Machinery1.311.351.131.Black Board

2.Videos

3Inversion of Mechanisms Single slider crank chain & its inversions Bull engine, Oscillating cylinder engine, Rotary IC engine, Crank & Slotted and Whitworth quick return mechanismsJaya Kumar

Kinematics of Machinery1.371.421.16,1.17.1,1.17.2,1.17.3,1.17.4,1.17.5,1.17.6,1.17.7,1.17.81.Black Board

2.Videos

4Inversion of Mechanisms Double slider crank chain & its inversions Scotch yoke mechanism, Oldhams couplingJaya Kumar

Kinematics of Machinery1.451.481.18,1.19.1,1.19.2,1.19.2,1.19.4,1.19.5, 1.195.61.Black Board 2.Videos

The Kavery Engineering College,

Mecheri, Salem District.DEPARTMENT RECORDSREC.NO : MECH/QP-04

REV NO : 00

DEPARTMENT B.E. MECHANICAL ENGINEERINGDATE : 03/06/2013

PAGE : 2 OF 9

TEACHING PLAN

Academic Year 2012-2014

Semester III (Regulations 2008)

ME2203Kinematics of MachineryII Year MECHHours/Week

LTPC

3104

Miss.E.Jamuna Assistant Professor Mechanical Department

UnitLecture No.Lecture TopicAuthor of the BookPage No.Content

No.Teaching AidsDate Taught

FromTo

5Mechanical advantage, Transmission angle, Description of common mechanismsJaya Kumar

Kinematics of Machinery1.521.551.20,1.20.1,1.20.31.Black Board 2.Videos

6Quick return mechanisms, Straight line generators, Steering gear for automobileJaya Kumar

Kinematics of Machinery1.561.581.21.1,1.21.21.Black Board 2.Videos

7Hookes joint, Toggle mechanisms, Ratchets, escapements, indexing mechanismsJaya Kumar

Kinematics of Machinery1.581.611.21.2,1.21.2,1.21.3,1.21.41.Black Board 2.Videos

IITITLE OF THE UNIT - KINEMATIC ANALYSIS

1Displacement, speed and Acceleration time curves, Velocity in mechanisms Relative velocity methodsR.S.Khurumi, J.K.Gupta, Theory of Machines1431447.1,7.2,Black Board And Chalk

2Motion of a link, Velocity of a point on a link by relarive methodR.S.Khurumi, J.K.Gupta, Theory of Machines1441457.3,7.4Black Board

3Velocity in slider crank mechanism, Instantaneous center methodR.S.Khurumi, J.K.Gupta, Theory of Machines1461477.5Black Board

4Velocity in slider crank mechanism, Instantaneous center methodR.S.Khurumi, J.K.Gupta, Theory of Machines1461477.5Black Board

The Kavery Engineering College,

Mecheri, Salem District.DEPARTMENT RECORDSREC.NO : MECH/QP-04

REV NO : 00

DEPARTMENT B.E. MECHANICAL ENGINEERINGDATE : 03/06/2013

PAGE : 3 OF 9

TEACHING PLAN

Academic Year 2012-2014

Semester III (Regulations 2008)

ME2203Kinematics of MachineryII Year MECHHours/Week

LTPC

3104

Miss.E.Jamuna Assistant Professor Mechanical Department

UnitLecture No.Lecture TopicAuthor of the BookPage No.Content

No.Teaching AidsDate Taught

FromTo

5Kennedys theorem in ICenter method, Angular velocity by I-center methodR.S.Khurumi, J.K.Gupta, Theory of Machines1211236.4,6.5,6.6Black Board

6Acceleration in mechanisms, Acceleration in link, slider crank mechanismsR.S.Khurumi, J.K.Gupta, Theory of Machines1741778.2,8.3,8.4Black Board

7Problems in accelerationR.S.Khurumi, J.K.Gupta, Theory of Machines1771858.4Black Board

8Problems in accelerationR.S.Khurumi, J.K.Gupta, Theory of Machines1851898.4Black Board

9Analytical method of analysis,Displacement of pistonR.S.Khurumi, J.K.Gupta, Theory of Machines1891918.4Black Board

10Velocity and acceleration of pistonR.S.Khurumi, J.K.Gupta, Theory of Machines1921948.4Black Board

11Velocity and acceleration of shaper mechanismR.S.Khurumi, J.K.Gupta, Theory of Machines1951998.4Black Board

12. Velocity and acceleration of Quick return mechanism,Coriolis acceleration componentR.S.Khurumi, J.K.Gupta, Theory of Machines2002048.4Black Board

13Problems in velocity and accelerationR.S.Khurumi, J.K.Gupta, Theory of Machines2042068.4Black Board

14Problems in velocity and accelerationR.S.Khurumi, J.K.Gupta, Theory of Machines2062168.4Black Board

The Kavery Engineering College,

Mecheri, Salem District.DEPARTMENT RECORDSREC.NO : MECH/QP-04

REV NO : 00

DEPARTMENT B.E. MECHANICAL ENGINEERINGDATE : 03/06/2013

PAGE : 4 OF 9

TEACHING PLAN

Academic Year 2012-2014

Semester III (Regulations 2008)

ME2203Kinematics of MachineryII Year MECHHours/Week

LTPC

3104

Miss.E.Jamuna Assistant Professor Mechanical Department

UnitLecture No.Lecture TopicAuthor of the BookPage No.Content

No.Teaching AidsDate Taught

FromTo

15Problems in velocity and accelerationR.S.Khurumi, J.K.Gupta, Theory of Machines2172288.4Black Board

TITLE OF THE UNIT - KINEMATICS OF CAMS

III1Cam introduction and its types, Types of followersR.S.Khurumi, J.K.Gupta, Theory of Machines77477620.1,20.21.Black Board 2.power point

2Displacement, velocity and acceleration diagramsR.S.Khurumi, J.K.Gupta, Theory of Machines77877920.6,20.7Black Board

3Simple harmonic motion and its D,V,A diagramsR.S.Khurumi, J.K.Gupta, Theory of Machines72794.1,4.2,4.3Black Board

4Parabolic motion in camR.S.Khurumi, J.K.Gupta, Theory of Machines79180620.3,20.4Black Board

5Cycloidal motion and its D,V,A diagramsR.S.Khurumi, J.K.Gupta, Theory of Machines80781120.5,20.6Black Board

6Construction of displacement diagramsJaya Kumar Kinematics of Machinery3.693.703.10.2,3.11.1Black Board

7Lay out of cam profile,circulararc&tangent camsJaya Kumar Kinematics of Machinery3.703.723.11.2Black Board

8Pressure angle and under cuttingJaya Kumar Kinematics of Machinery3.923.933.13,3.14Black Board

9Problems in CAMJaya Kumar Kinematics of Machinery3.183.253.9Black Board

10Problems in CAMJaya Kumar Kinematics of Machinery3.253.363.9Black Board

The Kavery Engineering College,

Mecheri, Salem District.DEPARTMENT RECORDSREC.NO : MECH/QP-04

REV NO : 00

DEPARTMENT B.E. MECHANICAL ENGINEERINGDATE : 03/06/2013

PAGE : 5 OF 9

TEACHING PLAN

Academic Year 2012-2014

Semester III (Regulations 2008)

ME2203Kinematics of MachineryII Year MECHHours/Week

LTPC

3104

Miss.E.Jamuna Assistant Professor Mechanical Department

UnitLecture No.Lecture TopicAuthor of the BookPage No.Content

No.Teaching AidsDate Taught

FromTo

11Problems in CAMJaya Kumar Kinematics of Machinery3.373.663.9Black Board

TITLE OF THE UNIT- GEARS

1Gears introduction and its classifications, Gear terminologies, Materials used in gear constructionR.S.Khurumi, J.K.Gupta, Theory of Machines38239012.1,12.2,12.3,12.4,12.5,12.61.Black Board 2.Power Point

3.Demo

2Velocity ratio of gears, Involute teethR.S.Khurumi, J.K.Gupta, Theory of Machines38839012.7,12.9,12.11Black Board

3Length of path of contact, Length of arc of contactR.S.Khurumi, J.K.Gupta, Theory of Machines39539712.16,12.17Black Board

4Problems in velocity, contact ratioR.S.Khurumi, J.K.Gupta, Theory of Machines39740212.18Black Board

5Problems in length of arc of contact, path of contactR.S.Khurumi, J.K.Gupta, Theory of Machines40240412.18Black Board

6Interference theoremR.S.Khurumi, J.K.Gupta, Theory of Machines40540812.19Black Board

7Minimum number of teeth on the pinion determinationR.S.Khurumi, J.K.Gupta, Theory of Machines40941512.21, 12.22Black Board

8UndercuttingR.S.Khurumi, J.K.Gupta, Theory of Machines41641812.24,12.25Black Board

The Kavery Engineering College,

Mecheri, Salem District.DEPARTMENT RECORDSREC.NO : MECH/QP-04

REV NO : 00

DEPARTMENT B.E. MECHANICAL ENGINEERINGDATE : 03/06/2013

PAGE : 6 OF 9

TEACHING PLAN

Academic Year 2012-2014

Semester III (Regulations 2008)

ME2203Kinematics of MachineryII Year MECHHours/Week

LTPC

3104

Miss.E.Jamuna Assistant Professor Mechanical Department

UnitLecture No.Lecture TopicAuthor of the BookPage No.Content

No.Teaching AidsDate Taught

FromTo

9Worm and worm gearsR.S.Khurumi, J.K.Gupta, Theory of Machines41841912.25Black Board

10Problems in Interference and undercuttingR.S.Khurumi, J.K.Gupta, Theory of Machines40841112.19Black Board

11Gear train and its types, simple gear trainR.S.Khurumi, J.K.Gupta, Theory of Machines42843013.1,13.2,13.3Black Board

12Compound and epi-cyclic gear trainsR.S.Khurumi, J.K.Gupta, Theory of Machines43043713.4,13.7Black Board

13Problems on Gear trainsR.S.Khurumi, J.K.Gupta, Theory of Machines43844413.7Black Board

14Problems on gear trainsR.S.Khurumi, J.K.Gupta, Theory of Machines44545713.7Black Board

TITLE OF THE UNIT - FRICTION

1

Kinds Of Friction, Co-Efficient of Friction, Inclined Plane, Motion Up The Plane Efficiency, Motion Down The Plane, Screw JackR.S.Khurumi, J.K.Gupta, Theory of Machines25827010.1,10.2,10.3,10.410.17Black Board

2Torque,Efficiency Of Screw Jack

Belt Rope Drives, Types, Velocity Ratio, Slip And CreepR.S.Khurumi, J.K.Gupta, Theory of Machines27127810.18,10.19Black Board

The Kavery Engineering College,

Mecheri, Salem District.DEPARTMENT RECORDSREC.NO : MECH/QP-04

REV NO : 00

DEPARTMENT B.E. MECHANICAL ENGINEERINGDATE : 03/06/2013

PAGE : 7 OF 9

TEACHING PLAN

Academic Year 2012-2014

Semester III (Regulations 2008)

ME2203Kinematics of MachineryII Year MECHHours/Week

LTPC

3104

Miss.E.Jamuna Assistant Professor Mechanical Department

UnitLecture No.Lecture TopicAuthor of the BookPage No.Content

No.Teaching AidsDate Taught

FromTo

3Length of open and close belt drives, Power transmitted by beltR.S.Khurumi, J.K.Gupta, Theory of Machines32533311.1,11.2,11.3,11.4Black Board

4Ratio of driving tension, angle of contact, centrifugal tension, maximum tension in beltR.S.Khurumi, J.K.Gupta, Theory of Machines34535011.16,11.17Black Board

5Problems in Friction, Problems in belt & rope drivesR.S.Khurumi, J.K.Gupta, Theory of Machines28429510.20,10.21Black Board

6Clutches, types, Terminologies used,Centrifugal clutchesR.S.Khurumi, J.K.Gupta, Theory of Machines29730010.31Black Board

7Brakes, factors influencing, terminologies usedR.S.Khurumi, J.K.Gupta, Theory of Machines73273419.1,19.2,19.3Black Board

8Shoe,Double shoe,Simple band, Differential brake R.S.Khurumi, J.K.Gupta, Theory of Machines73473519.4,19.5Black Board

9Shoe,Double shoe,Simple band, Differential brake R.S.Khurumi, J.K.Gupta, Theory of Machines73473519.4,19.5Black Board

10Shoe,Double shoe,Simple band, Differential brake R.S.Khurumi, J.K.Gupta, Theory of Machines73473519.4,19.5Black Board

11Brake ProblemsR.S.Khurumi, J.K.Gupta, Theory of Machines73773919.5Black Board

12Brake ProblemsR.S.Khurumi, J.K.Gupta, Theory of Machines74274519.35Black Board

The Kavery Engineering College,

Mecheri, Salem District.DEPARTMENT RECORDSREC.NO : MECH/QP-04

REV NO : 00

DEPARTMENT B.E. MECHANICAL ENGINEERINGDATE : 03/06/2013

PAGE : 8 OF 9

TEACHING PLAN

Academic Year 2012-2014

Semester III (Regulations 2008)

ME2203Kinematics of MachineryII Year MECHHours/Week

LTPC

3104

Miss.E.Jamuna Assistant Professor Mechanical Department

UnitLecture No.Lecture TopicAuthor of the BookPage No.Content

No.Teaching AidsDate Taught

FromTo

13Brake ProblemsR.S.Khurumi, J.K.Gupta, Theory of Machines74274519.35Black Board

PREPARED BY

Staff in charge APPROVED BY

HoD ISO Coordinator Principal

TEXTBOOKS

S.No.AuthorTitle of the BookEditionPublisherYear of Publication

1Jaya KumarKinematics of MachinesLakshmi publisher

2

REFERENCE BOOKS

S.No.AuthorTitle of the BookEditionPublisherYear of Publication

1R.S.Khurumi, J.K.GuptaKinematics of MachinesEurasia publisher2002

2R.Henry XavierTheory of MachinesI Edition2008

3V.RamamurtiMechanics of MachinesII Edition2005

ADDITIONAL RESOURCES

1

2.

3.

The Kavery Engineering College,

Mecheri, Salem District.DEPARTMENT RECORDSREC.NO : MECH/QP-04

REV NO : 00

DEPARTMENT B.E. MECHANICAL ENGINEERINGDATE : 03/06/2013

PAGE : 9 OF 9

TEACHING PLAN

Academic Year 2012-2014

Semester III (Regulations 2008)

PREPARED BY

Staff in charge APPROVED BY

HoD ISO Coordinator Principal

Revision History:

Revision LevelReason for revisionDateAuthorised By

FromTo