j08071a0000 - adapter lc-lc duplex optička spojnica sm i mm - telegÄrtner
DESCRIPTION
Data Sheet for TELEGÄRTNER itemTRANSCRIPT
-
order number: J08071A0000LC Duplex adaptor, Multimode and Singlemode, ceramic sleeve, plastichousing
Technical AttributesDescription LC Duplex adaptor, Multimode and Singlemode, ceramic
sleeve, plastic housingInstallation Snap-in mountingMount. dim. Z99Housing Colour blue
Product descriptionTelegrtner FO connectors are equipped with ceramic ferrules and split sleeves which are essential forprecision and endurance; termination to cables or fibers may be carried out using common tools andaccessories. The preformed convex front end of the connector ferrule provides extremely short polishingduration and exceptional optical performance. All FO connectors comply with the current internationalstandards.
The T-ST3 type provides an internal strain relief, which avoids signal interruption when pulling the cable(N.O.D.). For Plastic Fibers (POF) with 1 mm fiber diameter an economical metal connector is availableproviding extremely quick assembly using simple accessories without adhesive.
The current requirements to achieve in FO applications the same port density as with RJ45 connectors haveled to newly developed FO connector systems named SFF (= Small Form Factor). Telegrtner offers theconnector types MT-RJ and LC within this system. The space requirements in panels or outlets are only half ofthose required by common connector types such as ST or SC.
Telegrtner offers a complete range of components within this system: FO connectors, jacks for outletsprepared for direct field termination of fibers, adaptors, patch cables, adaptor cables, outlets with guaranteedbending radii and suitable for standard switching programs, patch panels with and without telescope operationas well as wall boxes in differerent sizes.
1 / 2
2013 Telegrtner Karl Grtner GmbH. Technische nderungen vorbehalten. Technical changes reserved. www.telegaertner.com Lerchenstr. 35, D-71144 Steinenbronn, Tel. +49 (0) 7157 125 100, Fax +49 (0) 7157 125 120, E-Mail: [email protected]
-
The SC/APC connector type (Angled Physical Contact) with 8 angled polished ferrule end face has beendeveloped for transmission lines with particular high return loss requirements for better than 60 dB. Theconnectors are available as pigtails or cable assemblies, the connector and adapter housings are green foreasy identification.
Mechanical CharacteristicsType connector type LC acc. to IEC 61754-20Durability (mating cycles) 1000Hex crimp size for strain relief 3.24 x 10 mmStrain relief 100 NMaterial: connector ferrule Zirkonia ceramicMaterial: adapor split sleeve Zirkonia ceramic or phosphor bronzeMaterial: plug housing, boot, dust caps thermoplastic, flame retardant, non halogenMaterial: adaptor housing thermoplastic, flame retardant, non halogenColour: Connector housing / adaptorhousing
multimode: beige or aqua; singlemode: blue; singlemodeAPC: green
Climatic CharacteristicsOperating temperature -20...80 CStorage temperature -40...90 C
Optical CharacteristicsInsertion loss: Plug (factory assembly) Multimode: max. 0.4 dB1; Singlemode/Singlemode APC:
max. 0.5 dB1Insertion loss: Adaptor Multimode/Singlemode: max. 0.2 dB1; Singlemode APC: 0.5
dB1Return loss: plug (factory assembly) Multimode: min. 30 dB; Singlemode: min. 40 dB;
Singlemode APC: min. 60 dB
2 / 2
2013 Telegrtner Karl Grtner GmbH. Technische nderungen vorbehalten. Technical changes reserved. www.telegaertner.com Lerchenstr. 35, D-71144 Steinenbronn, Tel. +49 (0) 7157 125 100, Fax +49 (0) 7157 125 120, E-Mail: [email protected]