iwmsa patron members · iswm pioneered training courses in solid waste management in 1980, launched...

38

Upload: others

Post on 10-Jun-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical
Page 2: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

71117B-NEW_Pikitup logo_SOC Limited.indd 1 2012/05/17 2:45 PM

IWMSA PATRON MEMBERS

Page 3: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

INDEX

About the IWMSA

IWMSA Code of Ethics

President

Vice President

IWMSA Membership

Individual Application for Membership

Organisation Application for Membership

IWMSA Training Courses

IWMSA Contact Details

Frequently Asked Questions

Patron Member Write Up’s

2

3

4

5

6

8

10

14

19

20

26

1

Page 4: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

The Institute is a professional, multi disciplinary organization with voluntary membership established to promote the science and practice of waste management and is a non profi t organization.

VisionA clean and healthy environment.

Mission

The IWMSA is committed to protecting the environment and people of Southern Africa through:

• Contributing to improving waste management standards and legislation• Fostering communication between all stakeholders in the waste industry • Supporting and promoting global trends in sustainable environmental practices.• Supporting international, national and regional, trends in best environmental practices• Practicing affordable cost effective waste management• Training and awareness creation on integrated waste management• Promoting the value of waste as a resource

We Promote

Environmentally acceptable, cost effective, appropriate and professional waste management. In this way we protect the environment and people of Southern Africa from the adverse effects of poor waste management. We achieve our objectives through education, technology transfer and input into and support of local legislation. WasteCon, our biennial congress and exhibition has become an international event. We promote cooperation with any person or body with complementary or similar objectives to our own. Where possible, the Institute enforces member compliance with its objectives.

Training

IWMSA offers a number of training courses including accredited and non accredited courses to further develop your knowledge of the waste industry. See the section on Training in this booklet and/or visit www.iwmsa.co.za for more information.

ABOUT THE IWMSA

2

Page 5: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

HISTORY OF IWMSA

3

A BRIEF HISTORY OF THE INSTITUTE OF WASTE MANAGEMENT OF SOUTHERN AFRICA

RANDBURG September 1976… A group of fi ve solid waste managers held the inaugural meeting of an organisation that was, later, to become ‘The Institute of Waste Management of Southern Africa.’ The catalyst for the formation of this body was the concern that these far-sighted individuals felt for the following issues:

• The lack of national attention to Solid Waste Management;• The inability of both private and public bodies to work in concert on the problems of waste;• The dearth of either academic, or technical training for anyone interested in fi elds relating to Waste

Management.

It is interesting to note that these concerns are still core issues in this Institute’s list of priorities!

RANDBURG October 1976…. A one day seminar was arranged by the Anti-Litter Campaign Committee of the Randburg Town Council on refuse removal and the problems associated with littering. This turned out to be more of a success than the organisers had foreseen . “The attendance of 150 Cleansing Offi cers and Municipal Offi cials from the Transvaal, O.F.S., an some from as far afi eld as the Cape and Natal, is an indication of the high level of interest in this subject.” (Municipal Engineer – November/December 1976). East Rand Plastics sponsored the morning tea, Polycrate provided an excellent lunch for all delegates and Leyland supplied the cocktails at the end of the day.

At the end of the day an Association for Cleansing Offi cers was established. As many as 60 people joined and Mr Koos Richter was elected as Chairman. Mr Richter stated that he was very pleased that people in this fi eld have at last come together to discuss methods and systems and to solve problems, as the Cleansing Departments have always been considered as a Cinderella with the municipalities. He indicated that “subjects such as what equipment to use in a particular case, dumping sites, labour problems, how to keep the towns clean, the litter problem, solid waste removal etc. will be discussed during the meetings of the Association.”

RANDBURG November 1977.… A second highly successful seminar was held at the Ferndale Recreation Centre in Randburg. It was offi cially opened by the Deputy Minister of Planning and the Environment, the Hon. Punt Janson. 200 delegates attended this meeting. Members of the emerging private waste contracting sector joined and Dr Peter Scott of Waste-tech (Pty) Ltd became actively involved. The Association underwent its fi rst name change to that of the Institute of Solid Waste Management (ISWM). This name was chosen to differentiate this body from the Institute of Water Pollution Control (IWPC) – the latter grew into the present day Water Institute of South Africa (WISA). Under the infl uence of Mr Jack Lawrence, the fi rst constitution borrowed heavily from that of the United Kingdom’s Institute of Wastes Management.

Two years after the founding of the Institute the Minister of Environmental Affairs accepted the offi ce of Patron of the Institute and this Department, together with the Department Water Affairs, have maintained a long and fruitful relationship with this organisation ever since. In 1980 the United Municipal Executive, the forerunner of the present day “local government organisation” in South Africa, recognised the ISWM. ISWM was elected to the International Solid Waste and Public Cleansing Association in Paris in 1981 and has had an on-off relationship with ISWA ever since.

ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical equipment and worked closely with Dr Graham Noble of the CSIR in the establishment of a national waste data bank. Initially ISWM managed seminars on an annual basis but this changed to the present day format of biannual Congresses in 1980 and the name WasteCon was fi rst used in 1990. At that time, Piet Theron, was responsible for organising the fi rst parallel session format was employed in an attempt to address the ever-widening multi-faceted nature of the waste manager’s fi eld of interest and everyone, at that time, thought he was overambitiously nuts!

Page 6: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

HISTORY OF IWMSA1992…. the Institute changed its name to that of the Institute of Waste Management (IWM) and again in 2000 to that of the Institute of Waste Management of Southern Africa (IWMSA) when expansion into the Southern African Development Community was initiated by the establishment of the Botswana Chapter. Subsequently waste management pioneers in Zambia and Zimbabwe have founded chapters. IWMSA is now an organisation that uniquely represents the interests of waste professionals in Southern Africa. The role of the private sector in the affairs of the Institute has grown over the years as has the co-operation between government and waste managers at all levels of civil society.

The list of presidents makes interesting reading….

Founding President - Koos Richter (Randburg) – 1976/1980Gys du Plessis (Kempton Park) – 1980/1982Stan Verrier (Johannesburg) – 1982/1984Jack Lawrence (Port Elizabeth) – 1984/1986Ton de Bruin (Cape Town) – 1986/1988Ray Byrne (Bedfordview) – 1988/1990Ray Lombard (Waste-tech (Pty) Ltd) – 1990/1992Piet Theron (Johannesburg) – 1992/1994Jarrod Ball (Jarrod Ball & Associates) – 1994/1996Peter Davies (Kaytech (Pty) Ltd) – 1996/1998Ian Hopewell (EnviroServ Holdings Limited) – 1998/2000June Lombard (Lombard de Mattos & Associates) – 2000/2002Peter Novella (Cape Metropolitan Council) – 2002/-2004Hendrik Neethling (Pretoria) – 2004-2006Shirleigh Strydom (Durban) - 2006-2008Vincent Charnley (Gauteng) – 2008-2010Stan Jewaskiewitz (Gauteng) – 2010-2012Deidre Nxumalo Freeman (East London) – 2012-2013Suzan Oelofse (Gauteng) – 2013-2016

Today…. the Institute has members of several differentiated categories, spanning the length and breadth of Southern Africa, whilst providing a forum for interaction and synergy between waste generators and the organisations having to manage waste. During the 26 year of its existence, the Institute has shown itself to be a learned society, an effective catalyst, well able to express the view of its members – and society – in terms of controls.

Koos Richter, Ray Lombard and Piet Theron

Page 7: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

This Code of Ethics, shall be binding upon all members of the Institute of Waste Management of Southern Africa (Institute) and any breach thereof shall be dealt with by an ad hoc disciplinary committee constituted from time to time by the Council of the Institute.

All members shall:

1. Uphold the reputation of the Institute and not bring the Institute into disrepute.

2. Abide by the Constitution, Policies and By-laws of the Institute.

3. Comply with all relevant legislation pertaining to waste management and the environment.

4. Conduct themselves in an honourable and ethical manner and shall, so far as possible, always have full regard to the interests of the public and the environment. Furthermore, their conduct shall at all times be conducive to maintaining the good reputation of the waste management industry.

5. Maintain their knowledge and skills at levels consistent with development in technology, legislation and management.

6. Apply due skill, care and diligence in conducting their business and / or rendering services and only accept or undertake work for which they possess, or can acquire and manage with responsibility, the necessary professional competence and organisation.

7. Obtain any contract, service or sale only through legally acceptable business practices.

8. Not intentionally injure the professional reputation of another member.

9. Advertise their services in an honest manner, which is not derogatory to the dignity or standing of the industry.

10. Only issue statements on behalf of the Institute, if specifi cally authorised by the offi cial Institute spokesperson.

11. While occupying a position of Offi ce in the Institute, shall not use their position to promote their own business interests.

CODE OF ETHICS

Page 8: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

PRESIDENTSuzan Oelofse - President

Suzan Oelofse enrolled as member of the IWMSA in 2006 and joined the Central Branch Committee in 2008. She took over as Chairperson of Central Branch in January 2009 and served in this capacity until her election as Vice President and now President. Suzan is currently a Principal Researcher in pollution and waste at the CSIR. She has worked in the waste industry since 1996.

The Institute of Waste Management of Southern Africa is the only waste industry association covering all aspects of all waste streams from generation through to fi nal disposal in South and Southern Africa at the moment. Being the only all-encompassing waste industry association, we endeavour to provide our members with access to information which will allow them to respond to the many challenges in our industry. Waste is increasingly being viewed as a vehicle for government to achieve its goals. The National Development Plan and the Green Economy Accord are two examples where waste is identifi ed as a means to stimulate job creation and enterprise development for economic growth and to transition to a low-carbon economy.

The IWMSA’s response to these policies is at numerous levels. Economic development will inevitably lead to more complex waste streams requiring more complex waste management and recycling technologies. Through our accredited and non-accredited training courses, we build capacity for improved waste management, by empowering people to manage waste in an integrated way towards improved waste management. We also contribute to up-skilling of people already active in the waste industry towards meeting the demands for implementing new and complex waste management technologies. As part of our social responsibility, we also sponsor previously disadvantaged individuals to benefi t from our training courses.

We also arrange networking, information sharing and learning opportunities to keep our members informed and in contact with:• new developments in waste regulation in South Africa;• the latest trends in waste management (national and international);• appropriate waste management approaches and technologies for local conditions;• sources of information and expertise in waste management locally and internationally.

The waste industry has been plagued with non-compliance to legislation at all levels in the waste cycle. In order to address this issue, the IWMSA has embarked on a process to develop a quality assurance system for the waste industry. The aim is to introduce self-regulation in the sector and to improve the general ethics applied in waste management in South Africa. This approach is aligned with our Code of Ethics which amongst others, call for honourable and ethical conduct.

We welcome anyone with an interest in waste management, or anyone who is or plan to become actively involved with any aspect of waste management, to apply for membership. On application for membership, you are required to sign the Code of Ethics of the IWMSA. We follow an internal approval process to protect the integrity of the organisation which takes about 6 to 8 weeks. A membership certifi cate is only issued to successful applicants. We would therefore encourage you to provide all the required information on application in order not to delay the approval process.

4

Page 9: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

VICE PRESIDENT

Jan Palm – Vice President

My vision for the IWMSA is that it would through com-mitment to its mission and creating more opportunities, strive to empower its members with knowledge and skills to practise waste management responsibly and to raise the level of awareness of waste management impacts in Southern Africa.

The question is how are we going to achieve the above?

Obviously the Institute is only as strong as its members and being a voluntary organisation it has unique challenges. Applying and becoming a member of the IWMSA will not only provide you with the opportunities to gain more knowledge and skills through networking and the nu-merous events the IWMSA is staging, but will also ask of you to share your knowledge with those in the Institute who can learn from your experiences.

Because the IWMSA has members across the whole spectrum of waste management, from waste avoidance, minimisation, reduction, collection, alternative technologies to fi nal disposal, both on the operating and design sides of each facet, the collective pool of knowledge and experience amongst its members is vast and available. The Institute has introduced Interest Groups so that members and non-members with similar interests can share their knowledge and experiences within a more focussed environment, the fact that these Interest Groups op-erate within the IWMSA strengthens the overall awareness of waste management impacts of all the members in that an understanding of the different view points or departure points of the various groups are shared. So doing the members develop understanding of the whole spec-trum of waste management and not only of their own fi eld of specialisation. This promotes the concept of integrated waste management.

Membership of the IWMSA is therefore not something one needs to be eligible to tender, but something one needs to grow in understanding all the complexities of integrated waste man-agement.

Apart from the above networking and information sharing opportunities, the Institute also ar-range opportunities for members to be informed of amendments and developments in the environmental legislation and, through events such as WasteCon, the latest national and inter-national waste management practices.

5

Page 10: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

IWMSA MEMBERSHIPHow to become a member

Become a member in six easy steps:1. Choose the membership that suits you best – should you need advice; please contact our head

offi ce for more information.2. Download and complete an application form - www.iwmsa.co.za and click on membership3. Fax your completed application form with your proof of payment through to 011-675 3465 or email

[email protected]. Supply all the necessary supporting documentation with the application form.5. Once we receive your application it will be submitted at the next branch committee meeting for

consideration.6. Once your application has been approved, your membership certifi cate will be emailed to you and

will be valid provided that all annual subscription fees are up to date.

Payment for individual membership is the responsibility of the individual and not the employer and is not transferable.

Membership is voluntary and should be considered a long-term investment in order to gain the maximum benefi t. There are various membership categories to choose from.

Our Members Include:• Municipalities• Consultants• Suppliers• Service providers• Contractors• Academics• National and Provincial Government• Industry• Mining• Corporates

Membership Benefi ts

Exclusive benefi ts for IWMSA Members

We provide you with opportunities to:• network and exchange information with experts• debate issues at events arranged by the various branches or interest groups• have your voice heard in the formulation of legislation• grow professionally and in business growth

We offer our members:• access to the latest waste management technology, trends and legislation• special rates at our IWMSA seminars, conferences and workshops• development skills upgrade courses within the industry• special rates and sponsorship opportunities at WasteCon our biennial international congress• free subscription to our offi cial journal RéSource – published quarterly• opportunities to contribute articles to our magazine RéSource• special rates for listing in our Buyers’ Guide and Directory• preferential rates for advertising in IWMSA publications

6

Page 11: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

IWMSA MEMBERSHIPHow to become a member

Additional benefi ts for our Organisation Members:• the use of the IWMSA logo on all their stationary and website• two delegates to any national seminar or WasteCon with full membership discounts

Patron members enjoy the following additional benefi ts:• fi rst opportunity to sponsor meetings, seminars and other IWMSA functions• two free delegates and a complimentary exhibition stand at WasteCon• opportunity to market projects in conjunction with IWMSA• their company logo on all IWMSA publications

The IWMSA proudly announces a great new benefi t for Members!

Any IWMSA Member wishing to hire a car may now do so, at preferential rates, through Avis. Members need to complete an Avis application form, quoting the reference number N560427. Avis will issue a preferred card which is then linked to the Member’s credit card, allowing the allocated free kilometres and discounted rate. Please visit our website at www.iwmsa.co.za to see the table of rates for full details.Please note that IWMSA Members must be responsible for their own accounts with Avis.

Individual Memberships prices include VAT (July 2014 – June 2016)

MEMBER R 500.00 per annum Any person who has been actively involved in waste management for more than twelve months and is in possession of a recognised qualifi cation.

ASSOCIATE MEMBER R 400.00 per annum Any person not eligible for member category above, but who is interested in or connected with some aspect of waste management.

RETIRED MEMBER R 220.00 per annum Any Institute member who is no longer actively engaged in or connected with waste management.

STUDENT R 220.00 per annum Any student actively engaged in a course studying to qualify in subjects approved by Council.

Organisation Memberships prices include VAT (July 2014 – June 2016)

SCHOOL AND COMMUNITY BASED ORGANISATIONR 250.00 per annum incl. VAT

COMPANIES MUNICIPALITIES1-19 employees R 1,500.00 per annum Local Municipality – R 1,100.00 per annum20-50 employees R 2,400.00 per annum District Municipality – R 2,400.00 per annum51 + employees R 3,700.00 per annum Metro – R 3,400.00 per annum

PATRON MEMBER R 33,000.00 per annumThis membership is for organisation members who take a responsible and dedicated stand for our policies and ideals

7

Page 12: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical
Page 13: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical
Page 14: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical
Page 15: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical
Page 16: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical
Page 17: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical
Page 18: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

WORKING TOGETHER FOR SOUND WASTE MANAGEMENT

ABOUT US

The Landfi ll and Waste Treatment Interest Group (L&WTIG) is an independent organisation and a subsidiary of the Institute of Waste Management of Southern Africa (IWMSA).

OUR MISSION

Our mission is to protect the environment of Southern Africa and its people against the adverse effects of poor waste management.

OUR OBJECTIVES

We’re committed to sound waste management through advocacy and educational activities that:

• Encourage waste management practices that are both environmentally acceptable and cost effective• Promote the science and practice of professional waste management• Facilitate information sharing

For more information on the regional Landfi ll Interest Groups please contact:

Kwa-Zulu Natal Chairmain: John Parkn Tel: 031 311 8820 or E-mail: [email protected]

Western Cape Chairman: Pieter Kriel Tel: 021 912 3000 or E-mail: [email protected]

Central Branch Chairman: Jonathan Shamrock Tel: 011 519 0200 or E-mail: [email protected]

THE LANDFILL AND WASTE TREATMENT INTEREST GROUP

IWMSA INTEREST GROUPS

Page 19: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

WHO WE ARE

Waste collection and transport encompasses diverse and complementary disciplines and as such our scope of interest includes various aspects of waste management including:

Collection techniques, Equipment, Transport, Economics, Transfer stations, Recycling, Environment, Human resources, Safety, Legislation and Regulation.

OBJECTIVES

It is this Interest Group’s objective to: • Facilitate the exchange of information on all aspects relating to waste collection and transport.• Provide a forum for interaction thereby enabling the sharing of experiences and knowledge both on a

formal and informal basis.• Create awareness of a vital element of waste management and to encourage better practices through

the promotion of improved techniques and maintenance procedures and the introduction to new equipment.

OUR ACTIVITIES

• To promote an interest and awareness in waste collection, transfer and transport.• To organise and hold meetings, workshops, seminars, competitions, technical tours, training courses

and discussions in order to promote waste collection and transport.• To initiate a newsletter and database to encourage communication and information exchange between

members. • To organise equipment expositions and plan and conduct relevant technical sessions for IWM national

events such as the WasteCon biennial conferences.• To carry out research and literature searches to obtain latest information available.• To provide technical support and a source of information thereby assisting members to identify and

solve problems to achieve best available practice.• To infl uence legislation and standards and provide input into town planning and service delivery when

appropriate.• To establish relationships with groups with similar interests both locally and internationally.

For more information please contact: Acting Chairman: Stephan Morkel E-mail: [email protected]

IWMSA INTEREST GROUPS

Page 20: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

WMRIG is an interest group of the Institute of Waste Management of Southern Africa (IWMSA)’s Western Cape Branch.

WMRIG organises events and discussions in the Cape Town area on a range of topics pertinent to waste minimisation and recycling. Past events included, among others:• Valuing Recycling in Landfi ll Management,• From Waste Compliance to Waste Excellence, and• Organic Waste – Legislation, Policy and Practice

WMRIG is run by a committee of volunteers operating in the waste management and recycling industry. The committee comprises environmental and communication consultants, local and provincial government, waste collection and sorting organisations, as well as recyclers and manufacturers.There is a quarterly newsletter for members with interesting snippets on waste minimisation, changes in waste management legislation and other industry-related news.

OUR VISION

WMRIG has a big vision:.“Inspire, Discover, Together – a World Without Waste”

In order to achieve our vision, we ask some challenging questions:• Rethink - what is waste?• How much of our current waste is better classifi ed as a resource?• In a circular economy, where waste of one process is a resource for another, how will the waste management industry change?• What do we need to do to get there?

Our objectives are to:• Promote all aspects of waste minimisation and waste prevention.• Share best practices with all stakeholders within government, industry and academia, as well as the general public.• Provide a forum for the exchange of ideas and best practices and promoting networks.• Support research and community outreach.• Stimulate compliance with legislation and best practice standards as well as diversion of waste from landfi ll

For more information on the Waste Minimisation Interest Groups please contact :

The Waste Minimisation Interest Group Chairman: Kirsten Barnes Tel : 021 811 0250 E-mail: [email protected]

The Waste Minimisation Interest Group - Western Cape Chairman: Margot Ladouce Branch Manager: Linda Campbell Tel : 021 487 2136 Tel: 021 534 9182 E-mail : [email protected] Email: [email protected]

WASTE MINIMISATION AND RECYCLING INTEREST GROUP

(WMRIG) - WESTERN CAPE

IWMSA INTEREST GROUPS

Page 21: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

IWMSA TRAINING PROGRAMS

TRAINING

The IWMSA now offers Accredited and non-accredited training.

Please note that should you have a group of more than ten people who require training, a concerted effort will be made to assist you with that training.

We are keen to know what our member’s training requirements are, so that we can provide you with the best available options for your specifi c needs.

Page 22: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical
Page 23: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical
Page 24: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

A C L E A N A N D H E A L T H Y

E N V I R O N M E N T

H A Z A R D O U S W A S T E M A N A G E M E N T T R A I N I N G

P R O G R A M M E

Phone: 011-675-3462 Fax: 011-675-3465 E-mail: [email protected] www.iwmsa.co.za

PO Box 79 Allen's Nek 1737

I N S T I T U T E O F W A S T E M A N A G E M E N T O F S O U T H E R N A F R I C A

We offer: Best trainers – the key to our training

success, is the skill of our trainers Best content – thoroughly tried and

tested to make sure that the right content is taught Skills are taught, skills that will make

a real difference in your workplace and to your career

Fully accredited trainers means quality assured learning solutions with full accreditation

The mission of the IWMSA is to protect the environment and people of SA through sustainable best practical environmental options by contributing to improving waste management standards & legislation supporting international, national and regional trends in best environmental practice promoting the science and technology of waste management educating and promoting sustainable best practical environmental options.

NEWS!

PURPOSE AND OUTCOMES

Purpose

The purpose of this program is to enable the learner to identify, classify, handle, trans-port, treat and dispose of hazardous waste correctly and in accordance with legislation.

Outcomes By the end of this course you will able to:

Identify the key legislation applicable to the handling of hazardous waste

Identify hazardous waste

Sample hazardous waste

Identify the correct storage and transportation requirements for

hazardous waste

Understand the South African waste classification system

Understand reuse, recycling, treatment and

disposal options available for hazardous

Page 25: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical
Page 26: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

IWMSA CONTACT DETAILS

19

Council 2014 -2016

NAME DESIGNATION TEL EMAIL

Suzan Oelofse President + 27 12 841 4333 [email protected] Palm Vice President + 27 21 982 6570 [email protected] Smit Executive Offi cer + 27 11 675 3464 [email protected] Strachan KZN Chairman + 27 31 719 5500 [email protected] de Meyer Central Branch Chair + 27 11 672 9942 [email protected] Ladouce Western Cape + 27 21 487 2136 [email protected] Nomakhwezi Nota Eastern Cape Chairman + 27 43 7351041 [email protected]

CENTRAL BRANCH COMMITTEE

Kobus de Meyer Chair + 27 11 672 9942 [email protected] Shamrock Vice Chair + 27 11 519 0200 [email protected] Nkosi Branch Manager + 27 11 675 3462 [email protected]

KZN BRANCH COMMITTEE

Lindsay Strachan Chair + 27 31 719-5500/90 [email protected] Beningfi eld Vice Chair + 27 32 538 1795 beningfi [email protected] Cockburn Branch Manager + 27 31 564 2795 [email protected]

WESTERN CAPE BRANCH

Margot Ladouce Chair + 27 21 487 2136 [email protected] Lisa Parkes Vice-Chair + 27 21 794 6300 [email protected] Campbell Branch Manager +27 21 534 9182 [email protected]

EASTERN CAPE BRANCH

Nomakhnezi Nota Chair + 27 43 7351041 [email protected] Jonas Branch Manager + 27 43 733 8349 [email protected]

HEAD OFFICE

Gail Smit Executive Offi cer + 27 11 675 3464 [email protected] Ooshuizen Administrative Coordinator + 27 11 675 3462 [email protected] Nkosi Administrative Assistant +27 11 675 3462 [email protected]

Shop 2, Weltevreden Park Shopping Centre | c/o Rinyani & Kanniedood Street | Weltevreden Park, 1709PO Box 79 | Allen’s Nek | 1737Website: www.iwmsa.co.za

Page 27: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

FREQUENTLY ASKED QUESTIONS

Page 28: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

FREQUENTLY ASKED QUESTIONSIWMSA Background

The Institute of Waste Management of Southern Africa (IWMSA) is a non-profi t organisation that supports professional waste management practices.

Our organisation comprises of volunteers who promote environmentally acceptable practices. We strive to protect our environment and people of Southern Africa against poor waste management practices.

Q. Does IWMSA do waste removals?

The Institute of Waste Management of Southern Africa does not do any waste removal.

Waste Removal is mainly done by Local Authorities and Private Companies.

Please visit our website and download our Buyers Guide that will guide you in fi nding the correct service provider for your special needs. www.iwmsa.co.za

Q. Do you supply containers for recycling?

No we do not supply any containers for recycling. We suggest that you fi nd the contact details of the relevant recycling organisations at www.recycling.co.za

Q. Do you collect recycling containers?

No we do not collect any recycling containers. We suggest that you fi nd the contact details of the relevant recycling organisations at www.recycling.co.za

Q. Which companies can I contact to provide waste management / removal / disposal services for Hazardous waste?

This will depend on your specifi c requirements and the kind of waste than needs to be removed. We have a detailed list of service providers in our Buyers Guide that will be able to assist you with your specifi c requirements, download at www.iwmsa.co.za

Registration as a Waste Transporter

The registration as a waste transporter varies from area to area. With many of your larger Local Authorities you are required as per their by-laws to register as a service provider and transporter of waste. This is mainly to keep track of all the different role players and transporters within the municipal boundaries. Visit our website for current info: www.iwmsa.co.za

20

Page 29: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

Q. Where do I need to register as a service provider?

We would suggest that you contact your Local Municipality where you operate in to fi nd out if you are required to register as a service provider

Q. Where must waste transporters register?

The Waste Act states: Duties of persons transporting waste

25. (1) The Minister, an MEC or a municipality may, by notice in the Gazette, require Any person or category of persons who transports waste for gain to—(a) register with the relevant waste management offi cer in the Department province or municipality, as the case may be; and (b) furnish such information as is specifi ed in that notice or as the waste management offi cer may reasonably require.(2) Any person engaged in the transportation of waste must take all reasonable steps to prevent any spillage of waste or littering from a vehicle used to transport waste.(3) Where waste is transported for the purposes of disposal, a person transporting the waste must, before offl oading the waste from the vehicle, ensure that the facility or place to which the waste is transported, is authorised to accept such waste.(4) Where hazardous waste is transported for purposes other than disposal, a person transporting the waste must, before offl oading the waste from the vehicle, ensure that the facility or place to which the waste is transported, is authorised to accept such waste and must obtain written confi rmation that the waste has been accepted.(5) In the absence of evidence to the contrary which raises a reasonable doubt, a person who is in control of a vehicle, or in a position to control the use of a vehicle, that is used to transport waste for the purpose of offl oading that waste, is considered to knowingly cause that waste to be offl oaded at the location where the waste is deposited. No national notice has been published to date. However, some municipalities have included such a requirement in their by-laws. Please check with the relevant Provincial authorities and municipalities.

Recycling

Recycling is key to reduce the amount of waste that lands up on our landfi ll sites. We believe that it is our responsibility as waste managers to educate and keep the general public involved regarding ways and means of how to recycle.

When we start to recycle we reduce the amount of waste going to our landfi ll site thus prolonging the lifespan of our landfi ll sites. We need to look further than just the fi nancial gain of recycling but also look at the environmental impact this will have on the environment

21

Page 30: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

Businesses have an added incentive to recycle because it cuts down the amount of waste being sent to landfi ll and therefore the cost of disposing this waste.

Q. How can I reduce waste at home?

• Pay attention to packaging• Buy products that are packaged minimally• Buy larger packages when possible• Buy concentrated products if you can• Do you really need the new article that you buy?• Use reusable shopping bags.• Purchase reusable products• Buy rechargeable batteries.• Recycle as much as you can.• Use energy saving bulbs• Buy quality products.• Sell or donate articles that you don’t need anymore• Purchase items that are made from recycled products• Make compost out of your green waste

Q. Where can I take my glass to be recycled and what kind of Glass can be recycled?

All kinds of glass of any colour can be recycled; it does not matter if they are broken. The following glass will not be eccepted for recycling

• Computer and TV Screens• Light Bulbs• Car Head Lights• Laboratory Glass

Useful Information

Glass bottles don’t need to be separated into the different glass colours. You do not have to wash glass before recycling but it would be nice to remove all the lids.

Important Contact Detail: The Glass Recycling Company Telephone Number: 0861245277 / 011 203 0767E-mail: [email protected] To fi nd out where your closest Glass Bank is simply SMS “Glass” and the name of your suburbs to 32310.

Q. I am interested in starting a recycling program at my offi ce / school / neighbourhood. How do I get started?

Please read our discussion under the Sectional Trust Development, this will give you a clear understanding on how to start this recycling drive. You may also visit the National Recycling Forum’s information page, as well as our Win with Waste page. This will give you an easy to follow guide to start a recycling program. www.recycling.co.za

22

Page 31: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

Q. What is e-waste and how do I dispose of e-waste?

Electronic waste or e-waste as it is commonly known is electronic waste. Although electronic waste also has a hazardous component in them that needs specialized disposal techniques, the majority of E-waste can be recycled, thus decreasing the need for raw materials needed to manufacture new appliances.

Herewith some examples of electronic waste:

Fax Machines, Cell Phones, Washing Machines, Coffee Machines, Old Computers, Computer Screens, Fluorescent Tubes, Televisions, Fridges, Medical Instruments, Surveillance Equipment, Lawn Mowers.

We suggest that you contact the e-Waste Association to fi nd out where your closest collection site is. Visit at www.ewaste.co.za

Q. What are the prices for recycling material?

Just like the stock exchange the prices for recycled material varies from day to day depending on the current demand for the specifi c material.

We suggest that you contact the relevant recycling company to establish what the current prices are for the specifi c material.

Q. Where is my closest recycling depot?

The easiest way to fi nd your closest recycling drop off depot would be to contact the relevant recycling organisation to assist with the relevant details of the depot within your area. Visit www.recycling.co.za

Q. Where can I take my empty plastic bottles?

We suggest that you contact one of the following recycling organisations to assist with your specifi c recycling requirements

Important Contact Detail: Plastics SA PETCOTelephone Number +27 (0) 11 314 4021 Telephone Number 0860 147 738e-mail: [email protected] E-mail: [email protected] www.petco.com

Extrupet Polystyrene Packaging CouncilTelephone Number +27 11 865 8360/1 Telephone Number +27 (0) 12 259 0554E-mail: [email protected] e-mail: [email protected] www.polystyrenepackaging.co.za Expanded Polystyrene Association of SA South African Plastics Recycling OrganizationTelephone Number +27 (0) 11 805-5002 Telephone Number 083 654 8967e-mail: [email protected] www.sapro.bizwww.epsasa.co.za

23

Page 32: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

Q. What can I do with all my old oil?

All used oil and lubricants can be recycled.

Herewith the different oil currently collected;• Hydraulic Oil• Gear Oil• Engine Oil Important Contact Details:

Rose Foundation OilkolTel: 021 448 7492 Tel: 086 110 1961 / 011 761 5720e-mail: [email protected] e-mail: [email protected]

Q. Where can I take my paper to be recycled?

All sorts of paper can be collected for paper recycling projects. The following paper can be collected for recycling:

• Newspapers, Magazines & old telephone directories• Offi ce Paper• Computer Printouts• Cardboard Boxes• Pamphlets

Please contact one of the recycling organisations below directly to fi nd out where your closest recycling depot is.

Important Contact Details:

Paper, Recycling Association of Southern Africa Nampak RecyclingTel: 011 803 5063 Tel: 0800 018 818 www.prasa.co.za www.nampak.com Email: [email protected] RecyclingKwa Zulu Natal Tel: 031 274 6600 Western Cape Tel: 021 931 5106 www.paperpickup.co.za

Sappi Refi breWestern/Eastern & Northern Cape/ Mpumalnaga/Limpopo/North West/Kwa Zulu Natal/Free State/Namibia Botswana/Malawi/Swaziland/ZimbabweTel: 01 982 2296 Tel: 013 741 3378Email: [email protected] Email: [email protected]

Western Cape (CBD & Surroundings) GautengTel: 021 552 2127 Tel: 011 407 8111Email: [email protected] Email: [email protected]

Website: www.sappirefi bre.com

24

Page 33: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

Q. Where can I take my tin cans to be recycled?

Nearly all cans / tins can be recycled. Herewith a list of the tins or cans that can be recycled.

• Food Cans• Aluminium Cans• Paint Tins• Steel Beverage Cans• Oil Cans• Aerosol Cans

Important Contact Details: Collect-a-Can The Aerosol Manufactures’ Association South AfricaTel: +27 (0) 11 466 2939 Tel: 833 259 704www.collectacan.co.za Email: [email protected]: www.collectacan.co.za Website: www.aerosol.co.za Q. I am a trustee at a Sectional Title Development, how do we start our own recycling project in the complex?

Although many people might be under the impression that it is a very diffi cult project to get off the ground we believe that by following these basics steps and starting off small, you will be able to make a huge success of your recycling project. These basic steps can also be followed for schools, communities or shopping centres

• Support. The support of fellow residents is critical - the new project will bring about change and some additional responsibilities for some staff, or new procedures for shopping centre employees and tenants

• Form a “Recycling Team”. The team must include stakeholders from within the sectional trust, school or the shopping centre. This will enable you to gather support and knowledge from all the different role players.

• Waste Stream. Your recycling team should conduct an audit to fi nd out what kind of waste goes into your waste stream as this will determine if a recycling project will be feasible in your area or not. While doing the audit you need to check what waste can be recycled.

• Local Authority. Ensure that you are legally permitted to do recycling in your area, this is determined by the cities by-laws

• Discussion with Recycling Companies. Start discussions with the preferred recycling companies that will be responsible for the placement of the recycling bins and the actual collection of full containers. It is important to put a timetable together for the collection of recyclable material

• Communication: Feedback to residents regarding the placement of bins for recyclable material, date and the time of collections is important as this will determine the success of your project.

• Designate weekly or monthly follow up to ensure that procedures are being followed and keep residents posted on the progress of the project via your newsletter or e-mails

Please refer to the National Recycling Forum’s information page, as well as the IWMSA’s Win with Waste page. It will provide you with an easy to follow guide to start a recycling program, as well as provide you with contact information of all the recycling companies that collect specifi c recyclables. Visit www.recycling.co.za and/or www.iwmsa.co.za for more information.

25

Page 34: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

PATRON MEMBER WRITE UP’S

26

Patrons Members are those companies who have chosen to align themselves to the code and ethics of the IWMSA. These organisations choose to actively take a responsible stand for the policies of the IWMSA and whose ideals closely match those of the IWMSA. Should you wish to become part of this elite group of members complete an application form and submit it to Head Offi ce.

600SA600SA was established in 1967 and the name has become a household brand in all markets in which we operate. In addition to Machine Tools, this includes the supply of equipment to the waste, forestry, scrap and trucking markets. Our recent move to larger premises in Spartan (driven by the need to increase our local manufacture) is indicative of our positive views and confi dence in the future of South and Southern Africa.

InterwasteSince its inception in 1989 InterWaste has been driven. Not to be the biggest in its chosen industry but simply to be the best. The basic quality and service ideals by which it has stood since then has, however, elevated it to a proud position of leadership in waste management on the sub-continent.

RoshconRoshcon is a subsidiary of Eskom Enterprises Division, with focus on infrastructure development and waste management throughout sub-Saharan Africa. The company has as its vision to be the major infrastructure and waste company in Africa sought after for its quality, innovation and socio-environmentally focused solutions.

TFM IndustriesTFM Industries is a leading Gauteng based manufacturer and supplier of specialized vehicle bodies for the construction, waste management, security and transport industries. The company focuses on providing system solutions and continually seeks international alliances in order to provide the most cost-effective, compatible solutions to meet the needs of the local market place. TFM is able to mobilize product support teams and a network of agents to support these products throughoutSouthern Africa and Mauritius. Our facilities in Olifantsfontein consist of our Main Plant factory, Logfi n, North- , East- and West Plants. Visit our website at www.tfm.co.za.

Mercedes BenzMercedes-Benz South Africa (MBSA) is a wholly-owned subsidiary of the global motor manufacturer, Daimler AG, with a history of over 60 years in South Africa as a committed corporate citizen. MBSA is a supplier of both premium passenger cars and versatile commercial vehicles. A strong tradition of innovation, coupled with a drive for superior customer service allows the company to tailor-make mobility solutions for individual and fl eet customers through its extended value chain.At its state-of-the-art manufacturing plant in East London, the company manufactures the Mercedes-Benz C-Class model for the local and US markets. At Daimler, we defi ne sustainability as responsible corporate behavior that leads to long-term business success and is in harmony with society and the environment.

Page 35: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

27

Nissan DieselNissan Diesel is a leading manufacturer and exporter of trucks in South Africa. The company is committed to providing ongoing support throughout a product’s lifecycle, by providing innovative transport solutions, genuine parts and quality after sales service and support, built on trust, in-depth industry knowledge and a strong technical skills set. For more information, visit www.nissandiesel.co.za

MAN - Machinenfabrick Augsburg NürnbergDomiciled in Munich, Germany, the MAN Nutzfahrzeuge Group is the largest company in the MAN Group and one of the leading international providers of commercial vehicles and transport solutions.In South Africa the group is represented by MAN Truck & Bus (S.A.) (Pty) Ltd, MAN Finance and MAN Turbo among others

DSW – Cleansing & Solid Waste Unit Of Ethekwini MunicipalityDSW provides a comprehensive waste management service comprising of domestic, commercial, industrial, landfi ll engineering , training and development. With a vast range of products and services specifi ed to suit the needs of each customer.

Pikitup Johannesburg SOC LimitedPikitup Johannesburg SOC Limited was established in 2001 as an independent municipal entity, wholly owned by the City of Johannesburg, to serve and provide waste management services in the Greater Johannesburg area. Pikitup’s vision is “To be the leading integrated waste management company in Africa”.

ROSE FoundationPromoting and encouraging environmentally responsible management of used lubricating oils and related waste in South Africa.

The East London IDZ… your solution to operating a world class manufacturing facilityThe East London Industrial Development Zone (ELIDZ) is an initiative by the South African government to encourage export oriented growth in the country through the attraction of foreign and local investors. The East London IDZ aims to bring economic growth to the region and beyond by offering investors a globally competitive combination of geographic position, infrastructure, services and labour.

71117B-NEW_Pikitup logo_SOC Limited.indd 1 2012/05/17 2:45 PM

Page 36: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

28

Mpact Plastic Containers Pty LtdMpact Plastic Containers is a leading supplier of plastic containers in southern Africa. The Environmental division focuses on fully integrated solutions for domestic, industrial and municipal waste management systems. Products include litter bins, two and four wheeled refuse bins and bulk collection banks. All products are practical, durable and manufactured to the highest standards.

Barloworld EquipmentBarloworld Equipment is Caterpillar’s southern African dealer for Cat earthmoving equipment, engines and electric power generation systems. We also represent complementary brands that include Metso Mobile crushing and screening solutions. Purpose built Cat machines meet high production demands in waste handling, construction, mining and general industry.

SanitechInformal settlementThis division specialises in providing sanitation to Government sponsored projects such as Informal settlements where there is no proper sanitation facilities in place.Additional sales and servicesSanitech have extensive experience in the servicing of septic and other tanks. We also service customer owned toilet units.

Sanitech Hygiene supplies, sells and maintains bathroom as well as change room fi tments. It also offers products and services related to washing and drying hands, sanitisers, bins and fragrances

Talbot LaboratoriesTalbot Laboratories is a commercial SANAS accredited laboratory, which specialises in the chemical and microbiological analysis of water and wastewater. It is equipped to test a multitude of water and waste samples, covering an extensive list of quality parameters across a diverse range of industries. Talbot Laboratories is a business division of Talbot & Talbot which offers a holistic approach to water management

Wasteman Holdings (Pty) LtdWasteman is a leading, South African provider of integrated waste management solutions to the Commercial, Industrial and Public sectors. Our comprehensive range of services include Collection of all waste types, Management of landfi ll sites, Recycling, Treatment, Specialised Industrial Cleaning, Pipe Surveying, Emergency Spill Response and customised On-Site Total Waste Management Systems.

Page 37: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical

29

Oilkol (Pty) LtdThe ISO 14001 Certifi ed collection, handling, transportation, storage and delivery of used lube oil, waste oil, used oil fi lters and SANS10228 classifi ed dangerous goods throughout Southern Africa to Oilkol operated storage facilities, approved re-processors and users. The collected used oil and waste oil is disposed of to approved ISO14001 certifi ed refi ners.

Bureau VeritasBureau Veritas offers routine as well as specialized services quickly, accurately and effi ciently. The major focus on providing sustainable services to industry is quality. Bureau Veritas Laboratory is SANAS accredited in accordance with ISO 17025, which covers techniques and methods on various instruments ranging from Gas Chromatog-raphy, Gas Chromatography Mass Spectrometry, High Performance Liquid Chromatography to Ultra Performance Liquid Chromatography, Atomic Absorption, Inductively Coupled Plasma Mass Spectrometry and Inductively Coupled Plasma Optical Emission Spectroscopy. M & L Laboratory Services (Pty) Ltd are compliant with many different quality standards such as Medicines Control Council and Client QA, All equip-ment is fully qualifi ed ad complies with PICS requirements. Services include : Waste Classifi cation, Water Analysis, Soil Analysis, Food Test-ing, Healthcare Analysis, Occupational Health Testing.

VolkswagenVolkswagen s a German car manufacturer headquartered in Wolfsburg, Lower Saxony, Germany. Established in 1937, Volkswagen is the top-selling and namesake marque of the Volkswagen Group, the holding company created in 1975 for the growing company, and is now the second-largest auto maker in the world, behind Toyota.

Environmental record: Volkswagen fi rst implemented its seven environmental goals in Technical Development in 1996. The plan contains themes involving climate protection, resource conservation, and healthcare, through objectives such as reducing greenhouse emissions and fuel consumption, enabling the use of alternative fuels, and avoiding the use of hazardous materials.

Page 38: IWMSA PATRON MEMBERS · ISWM pioneered training courses in solid waste management in 1980, launched the fi rst national magazine on waste management, established standards for mechanical