ivoclar tech
TRANSCRIPT
![Page 1: Ivoclar tech](https://reader038.vdocuments.us/reader038/viewer/2022102901/554b858bb4c90574668b4cc8/html5/thumbnails/1.jpg)
Figure 1: The patient presented with a failing amalgam restoration on tooth No. 14
![Page 2: Ivoclar tech](https://reader038.vdocuments.us/reader038/viewer/2022102901/554b858bb4c90574668b4cc8/html5/thumbnails/2.jpg)
Figure 2: Image of the patient’s tooth after restoration removal and caries excavation.
![Page 3: Ivoclar tech](https://reader038.vdocuments.us/reader038/viewer/2022102901/554b858bb4c90574668b4cc8/html5/thumbnails/3.jpg)
Figure 3: The enamel was etched for 15 seconds
![Page 4: Ivoclar tech](https://reader038.vdocuments.us/reader038/viewer/2022102901/554b858bb4c90574668b4cc8/html5/thumbnails/4.jpg)
Figure 4: The entire cavity preparation was etched for an additional 15 seconds.
![Page 5: Ivoclar tech](https://reader038.vdocuments.us/reader038/viewer/2022102901/554b858bb4c90574668b4cc8/html5/thumbnails/5.jpg)
Figure 5: Image of the preparation after rinsing and air drying.
![Page 6: Ivoclar tech](https://reader038.vdocuments.us/reader038/viewer/2022102901/554b858bb4c90574668b4cc8/html5/thumbnails/6.jpg)
Figure 6: Adhese Universal adhesive was scrubbed into tooth structure for 20 seconds.
![Page 7: Ivoclar tech](https://reader038.vdocuments.us/reader038/viewer/2022102901/554b858bb4c90574668b4cc8/html5/thumbnails/7.jpg)
Figure 7: The adhesive was dispersed with air until a glossy immobile film layer resulted.
![Page 8: Ivoclar tech](https://reader038.vdocuments.us/reader038/viewer/2022102901/554b858bb4c90574668b4cc8/html5/thumbnails/8.jpg)
Figure 8: The adhesive was lightly cured with an LED curing light for 10 seconds.
![Page 9: Ivoclar tech](https://reader038.vdocuments.us/reader038/viewer/2022102901/554b858bb4c90574668b4cc8/html5/thumbnails/9.jpg)
Figure 9: Tetric EvoCeram Bulk Fill in shade IVB was placed.
![Page 10: Ivoclar tech](https://reader038.vdocuments.us/reader038/viewer/2022102901/554b858bb4c90574668b4cc8/html5/thumbnails/10.jpg)
A contouring instrument ‘OptraSculpt Pad’ was used to contour the composite material.