issue 141
DESCRIPTION
A weekly online magazine to the timber and forestry industryTRANSCRIPT
Advertising: Tel +61 7 3256 1779 Email: [email protected] 1issuE 141 | 06.09.10 | PAgE
IN one of the harshest ever revelations to Australia’s timber industry, a legal authority has counseled traders that merchandising falsely represented products to consumers exposes them to the risk of claims for damages for personal injury.Noted barrister Nicholas Ferrett, a specialist in commercial law and trade practices, warns that any business or individual importing or selling wood products that do not meet Australian standards, including those requirements for formaldehyde emissions, risks prosecution under the Trade Practices Act.Mr Ferrett states this is a breach of ‘consumer protection’ provisions and timber importers
and traders could be liable for personal injury damage.“In my view, it can also raise concerns for the importers and sellers,” Mr Ferrett said.“My primary concern would be the potential breaches of consumer protection provisions of the Trade Practices Act and corresponding provisions in the state fair trading statutes – legislation that prohibits misleading and deceptive conduct and false and misleading representations about the characteristics of goods.”The counseling by Mr Ferrett is timely; a new raft of imported products, including plywood panels and flat-pack furniture components, has failed
Legal minefieldNon-compliant wood products risk
exposure to unlawful damage claims
Advertising: Tel +61 7 3256 1779 Email: [email protected] issue 141 | 06.09.10 | Page 1
6499
Cont Page 3
All go forMelbourneconference
Speakers bookedfor ‘global’ theme
ThiS iSSue
MicroPro®
Copper Quat
Visit: www.osmose.com.au or phone: 1800 088 809Osmose® and MicroPro® are registered trademarks of Osmose, Inc. or its subsidiaries. A Better Earth Idea from Osmose sm and Treated Wood Just Got Greener sm are slogan marks of Osmose Inc and its subsidiaries. MicroPro timber products are produced by independently owned and operated wood preserving facilities. * See MicroPro/SmartSense fastener and hardware information
sheet. © 2010 Osmose, Inc.
Tre
ated
Wood Just Got G
reenersm
A Better Earth Idea from Osmose sm®
Now
Approved For
Aluminium
Contact*
First Wood Preservative to Receive EPP Status. The Osmose MicroPro® technology is the first wood preservative to be EPP
(Environmentally Preferable Product) certified by Scientific Certification Systems.
MicroPro®
Your WEINIG expert at www.weinig.com
WEINIG OFFERS MORE
Everything for solid timber processing. Everything from a single source. We give our 100%!
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 141 | 06.09.10 2
THE British Forestry Commission is about to test a new quality assurance scheme for tree planting projects designed to sequester carbon.The market for such projects is increasing but, until now, there have been no standards to measure their claims against, or to ensure that real benefits will accrue.The new Woodland Carbon Code will encourage a consistent approach to projects and provide clarity and transparency to potential customers and investors about what their contributions should achieve.The commission developed the code in conjunction with a wide range of interests and it was subject to consultation earlier this year before being finalised.To comply with the code, projects must be responsibly and sustainably managed to national standards; use standard methods for estimating the carbon that will be sequestered or locked up; be independently verified; and they must meet transparent criteria and standards to ensure that real carbon benefits are made.Project providers must register
with the Forestry Commission, stating the exact location and long-term objectives of their project. Once approved, projects will then appear in a national online register.
“Increasingly, people and companies are realising the valuable potential that tree planting schemes have to soak up CO2 from the atmosphere,” says Forestry Commission director-general Tim Rollinson.
“There are now many commercial schemes that encourage individuals and businesses to contribute to tree planting to help compensate for their carbon footprint. But before investing in projects people want to know that schemes will actually deliver what they claim.
“The Woodland Carbon Code will provide that reassurance and will encourage more investment in tree planting in the UK.”
The six-month pilot phase will test the scheme with around a dozen pilot projects throughout the UK. This experience will help to refine the code and its associated guidance before it is launched early in 2011.
Carbon assurancescheme measuresplanting standards
INDUSTRY NEWS
At TAbmA we do it All!
How do you employ
apprentices?
We recruitWe trainWe mentorWe provide reportsWe developWe rotate if necessary
Forget the drama – call Justin Dwyer on (02) 9277 3172 and find out how easy it is for us to do all of itfor you.
www.tabma.com.au
across Australia’sforest and forest
products industry.. since 1940
Makinganimpact ..
Victorian Association ofForest Industries
Level 2, 2 Market StreetMelbourne 3000
Tel: +61 3 9611 9000 Fax: +61 3 9611 9011
Email: [email protected]: www.vafi.org.au
Please join us!
2010 VAFI
AnnualDinner
Friday October 15Crown Entertainment
Complex in Melbourne
Watch this space!More details to
follow soon
FSC global leaders for Hobart talksGLOBAL leaders in the FSC system will address the FSC Asia Pacific National Organisations conference and workshop on certification and development in Hobart on September 22.
Speakers include Timothy Synnott, first executive director, FCS International and Jaime Levy, FSC International board member (Latin America).
Leaders from FSC International in Bonn and FSC organisations in Asia and the Pacific will meet at the conference.
This will be one of the most significant gatherings of FSC leaders to take place in the Asia Pacific region.
An FSC certification workshop for small and private landholders will also be held in Hobart from September 22 to 24.
Advertising: Tel +61 7 3256 1779 Email: [email protected] 3issuE 141 | 06.09.10 | PAgE
to comply with Australian standards after accredited laboratory tests.Mr Ferrett said where a wood product was sold to a consumer (for example through a hardware store), a court might well hold that there was an implied representation that the product was safe for the sorts of uses a consumer was likely to put the product – small construction jobs, building furniture and the like.In other words, uses which were likely to leave the product in close proximity to the consumer.“Where a non-compliant wood product is sold to the consumer the seller may well be taken to have falsely represented that the product is safe for ordinary
consumer uses when it is not,” Mr Ferrett said.“This would leave the seller potentially at risk of not only refunding the price of the product but also liability for damages and personal injury.”
Testing by the EWPAA has shown that all products manufactured by EWPAA members in Australia and New Zealand meet the Australian standards in all respects.In fact, the majority of Australian wood panel manufacturers participate in a product quality assurance certification program that requires independent testing and auditing of manufacturing processes to ensure compliance to the Australian Standards. Consumers can identify these products by the use of the EWPAA logo for plywood and LVL and the ATCA logo for particleboard and MDF.The risks associated with products that fail Australian standards are underlined by a warning last week from the Australian Competition and Consumers Commission that businesses should be ready to report unsafe products within two days or face the risk of jail or fines of up to $16,500.From January next year, companies for the first time will be required to notify the ACCC within two days once they become aware a product has, or may have, caused serious injury, illness or death.The changes are part of far-
Wood products that do not meet Australian standards risk prosecution.
From Page 1
INDUSTRY NEWS
increase in imports that failcompliance with standards Book
Now!9 September 2010Sofitel Melbourne
“Australia’s Place in the Changing Global Forest Products Market”Forest Industry Development Conference, presented by ForestWorks
This major industry development conference will include speakers from global certification bodies, environmental non-government organisations, leading global forest products innovators and the Australian industry. Key themes:
Markets:Emerging Forest Products Markets
Investment: Growth for the Industry
Community: Stakeholder Support for Forestry and Forest Products
Australia’s Place in the Changing Global Forest Products Market
Book now! Contact [email protected] www.forestworks.com.au to download a full Registration Form
Cont Page 6
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 141 | 06.09.10 4
THE US hardwood sector is increasing its push into the Australasian and Pacific regions with direct exports of lumber, veneer and flooring reaching $US4.4 million in the first six months of 2010.This represents a 43% increase in value over the same period last year.While exports of US hardwood lumber to the region increased by 39% to $3.4 million, shipments of hardwood veneer and flooring rose by 51% to $891,000 and by 338% to $111,000, respectivelyIn volume terms, shipments of US hardwood lumber to the region rose to 3871 cub m in the January-June period. Of this, 2625 cub m was absorbed by Australia, a 31% increase on the first half of 2009, and 1246 cub m was accounted for by New Zealand, a 43% increase.Both Australia and New Zealand are markets for premium value imported hardwood lumber. In the January-June period of 2010, the unit value of US hardwood lumber shipped reached $972 cub m to Australia and $695 cub m to New Zealand.
Shipments were dominated by white oak which has developed in to a popular species for flooring. Although not great in volume terms, there were significant increases in shipments of red oak, maple, walnut and tulipwood during the period.In the first half of 2010, direct exports of US hardwood veneer to the region went, in the main, to Australia and reached a value of $797,000. This marked a 47% increase on the previous year.Some US hardwood veneers were also shipped directly to New Zealand last year, with the total value reaching $94,000.
This also marks a significant increase from the previous year. Although difficult to quantify precisely, the majority of American hardwood veneers would have been in white oak.Although not a value-added product and, therefore, not promoted by the American Hardwood Export Council, it is important to note that shipments of US hardwood logs to the region reached a volume of 1784 cub m during the January to June period of this year, marking a decrease of 24% on the previous year.As with lumber and veneer, this trade can be almost entirely accounted for by Australia and
New Zealand, with Australia taking 555 cub m and New Zealand 1229 cub m. Also as with lumber, this trade was dominated by white oak.Meanwhile, leading integrated forest products producer Canfor, located in British Columbia, with facilities spread across Canada and the US, continues to show signs of improvement as the North American forest industry slowly recovers.The company reported total net income of $US40.4 million for the second quarter of 2010, compared to $32.5 million for the first quarter and $12.1 million for the second quarter of 2009. For the six months ended June 30, 2010, Canfor’s net income was $72.9 million, compared to a loss of $57.8 million for the comparable period in 2009.A rally in the price of solid wood that started in early 2010 came to an abrupt end mid-way through the second quarter, the result of a combination of higher industry production, slowing inventory replenishment orders and a stalling US housing recovery.
INDUSTRY NEWS
US white oak flooring timbers .. growing market in Australasia.
us hardwoods push into flooringmarkets in Australia, New Zealand
White oak dominates rise in lumber shipments
Advertising: Tel +61 7 3256 1779 Email: [email protected] 5issuE 141 | 06.09.10 | PAgE
20
10
SePTeMBeR 20106-12: Landcare Week. www.landcareonline.com
7: WoodSolutions 2010. Program for architects, engineers and specifiers. Dockside, Darling Harbour, Sydney. Register interest at www.woodsolutions2010.com.au
7-9: Wood Manufacturing 2010. Rotorua, NZ. Designed for wood processing operations in the dry mill and stand-alone wood manufacturing companies. View: www.woodmanufacturingevents.com
8-10: AFAC bushfire CRC annual conference. Darwin Convention Centre Australia. www.afac10.org
9: Wood Solutions 2010 program. Melbourne Convention and Exhibition Centre. Register interest at www.woodsolutions2010.com.au
9: First Super Plantation investors’ Seminar. Sofitel Melbourne on Collins. Day prior to industry development conference – ‘Australia’s Place in the Changing Global Forest Products Market’. Contact: ForestWorks cday@ forestworks.com.au Visit www.forestworks.com.au to download a full registration form
9: Australia’s Place in the Changing Global Forest Products Market. Future opportunities for global forestry markets including renewable energy; certification and regulation of global markets; ownership and investment in Australia; industry-led solutions for a sustainable industry. Presented by ForestWorks, Sofitel Melbourne on Collins. Note: Forest industries liaison dinner in the evening at the Regent Theatre on Collins Street. For information contact: [email protected]
EvENTS
WHAT’S ON?
National Association ofForest Industries Ltd
(Est. 1987)PO Box 239,
Deakin ACT 2600Tel: (02) 6285 3833.Fax: (02) 6285 3855
Web: www.nafi.com.au
SUSTAINABLE.RESPONSIBLE.
The NationalAssociation of Forest
Industries (NAFI)is striving for an
ecologically sustainableAustralian societyachieved through
dynamic,internationally
competitive forestindustries.
NAFI’s mission is torepresent the interests
of members bypromoting theenvironmental
sustainability andthe prosperity ofAustralian forest
industries.
sustainable.responsible.
The National Association of
Forest Industries (NAFI) represents
Australian companies, individuals and
organisations involved in the forestry and
forest products industries.
The National Association of Forest industries Ltd
(EST.1987)PO Box 239,
Deakin, ACT 2600Tel: (02) 6285 3833Fax: (02) 6285 3855
Web: www.nafi.com.au
NAFI works with state and federal governments to
support the interests of its members while at the same
time improving industry standards and practices,
promoting sustainable forestry management and
educating the broader community on the
economic, environment and social benefits of a strong sustainable
forest industry.
13-15: Manufacturing 2010. Melbourne. Designed for wood processing operations in the dry mill and stand-alone wood manufacturing companies. View: www.woodmanufacturingevents.com
15: WoodSolutions 2010 program. State Library of Queensland, Brisbane. Register interest at www.woodsolutions2010.com.au
15-16: Wood Manufacturing 2010 Profitable Wood Manufacturing - Tooling Technology & Design, Melbourne.
20-21: Wood Manufacturing 2010 Profitable Wood Manufacturing - Tooling Technology & Design Rotorua, NZ.
30-2 October: The Future of Forestry and Forest Science Conference. Celebrating the centenary of forestry education in Australia. Sydney Myer Asia Centre Carrillo Gantner Theatre, Melbourne University. Contact: Event Planners Australia forestry. Email: [email protected]
September-October: Centenary of Forestry education in Australia. Celebrated with various activities and events reflecting on the past, and preparing for the challenges of the future.
OCTOBeR 20109: Queensland Timber industry Awards Dinner. Sofitel Brisbane Central, 249 Turbot Street, Brisbane. Contact: TABMA Queensland. Tel: (07) 3254 3166. Mob:0438 295 136. www.tabma.com.au
10-13: Australian Forest Growers national conference, Mount Gambier, SA. Chief executive Warwick Ragg. Contact national office: (02) 6162 9000.
12: ForestWood 2010. A pan-industry conference jointly hosted by the Forest Owners Association (FOA), Wood Processors Association (WPA), Pine Manufacturers Association (PMA), Forest Industry Contractors Association (FICA) and supported by Woodco, NZ Farm Forestry Association (NZFFA) and Frame & Truss Manufacturers Association (FTMA). Venue: Museum of New Zealand Te Papa Tongarewa in Wellington.
15-17: Melbourne Timber and Working with Wood expo, Melbourne Showground, Melbourne. Contact: (02) 9974 1393. Fax: (02)9974 3426 Email: [email protected]
19-20: MTC Global Woodmart: Gateway to international Wood Markets. The first ‘one-stop’ selling and buying platform for all suppliers and buyers of wood and wood products. Early bird discount 5%. Organised by the Malaysian Timber Council at the Kuala Lumpur Convention Centre, Malaysia. Contact: Malaysian Timber Council. Tel: +60 3 9281 1999. Fax: +60 3 9289 8999. Email: [email protected] Web: www.globalwoodmart.my
29: TABMA annual dinner.LunaPark, Sydney. Incorporating theAustralian Timber Design Awardspresented by TDA NSW. Dinnersupported by TDA, NSW Forest
Products Association and FWPA. Contact: TABMA on (02) 9277 3172
NOVeMBeR 201017-19: ForestTeCh 2010 Tools & Technologies to improve Forest Planning & Operations, Rotorua,NZ.
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 141 | 06.09.10 6
reaching reforms to Australian consumer laws and the Trade Practices Act that are being introduced in two tranches.The first tranch includes the new unfair contracts regime, which began in July, as well as increased enforcement options for the ACCC, including the ability to issue disqualification orders and substantiation and infringement notices.The recent changes also authorise the ACCC and the Australian Securities and Investments Commission to
seek penalties of up to $1.1 million against companies and $220,000 against individuals who make false or misleading representations or engage in unconscionable conduct.
The second tranch will come into effect in January and includes a single set of statutory consumer guarantees, new prohibitions on false and misleading representations and changes to allow the federal minister to prescribe safety standards and impose interim or permanent bans on consumer goods and services.
INDUSTRY NEWS
From Page 3
Treading legal minefield
NZ forest festivalteam rubs noseswith guest nationPlenty happening at Circular QuayCOUNTDOWN ‘365% pure’ begins on September 10 at the Tourism NZ Rugby Ball at the overseas passenger terminal on Sydney’s Circular Quay.The Bay of Plenty in New Zealand is gearing up for a number of major events that will run prior to, during and post Rugby World Cup 2011 and selected members of industry will be among guests who will hear all about it at the Sydney promotion.A business hosting program will feature ex-All Black captain and Sydney resident David Kirk.The New Zealand Forestry and Wood Processing Festival is to be held the week prior to the Rugby World Cup in Rotorua. It is expected to be the largest forestry event in the southern hemisphere attracting some 250 global and national exhibitors and providing a range of technical workshops, demonstrations, open days
and competition.Australia has been offered ’guest nation status’ for the festival and organisers will be in Sydney next week to discuss details and hand over the ‘centerpiece’ of the event created by the Te Puia, the renowned NZ Maori Arts and Crafts Institute in Rotorua.
Cont Page 11
Advertising: Tel +61 7 3256 1779 Email: [email protected] 7issuE 141 | 06.09.10 | PAgE
KEY stakeholders in Australia’s forest and timber industries will be engaged in a two-year revision of the Australian Standards for sustainable forest management and the chain of custody process.Australian Forestry Standard Ltd (AFSL) this week announced the commencement of the five-yearly revision process of the Australian Standards for Sustainable Forest Management (AS 4708) and Chain of Custody of wood and wood products (AS 4707).“The revision will be a concentrated and collaborative process spanning two years,” AFS chair Geoff Gorrie said.“The intensive public participation plan for the project will fully engage all stakeholder groups and interested parties within and connected to sustainable forestry and the supply chain of wood and wood products.“Coupled with rigorous adherence to international processes and guidelines, as well as an emphasis on science and evidence, the review project will ensure that internationally
recognised Australian standards continue to be regarded as the most credible and robust forest certification tools.”Responsibility of the reviews and ultimate decision making powers will reside with Standards Reference Committees (SRCs), one for each Australian standard.SRCs members will consist of representatives who cover scientific, environmental, social, economic and cultural aspects of sustainable forest management and wood production in Australia. Nominations from
representative national organisations, industry bodies and stakeholders to participate on the SRCs are now being distributed and will be advertised in leading trade publications. “There are many places that need to be filled and AFSL is ensuring that all interested parties are aware of their ability to be involved either on the committee or through public consultation,” Mr Gorrie said.“Because the revision will ensure a wide coverage of topics and criteria, engagement with stakeholders and interested
parties is a priority.”Dr Paul Briggs, a leader in Australian forest management for more than 25 years, has been appointed chair of the SRC for Sustainable Forest Management. His strong technical and scientific background is well suited to the position.AFSL chief executive Kayt Watts said the revision process involved a public call for comment on both Australian standards.“It will be interesting to see the types of issues and aspects of the criteria of the standards that will be raised in this process, especially in this ever changing forestry and wood production environment,” Ms Watts said.“AFSL is committed to the revision process, which enables a fully transparent and inclusive consultation.”Fitzpatrick Woods Consulting has been appointed to provide an independent management service to the revision project, especially relating to collaborative stakeholder management and standards
INDUSTRY NEWS
Cont Page 13
Review will testify Australia has mostcredible standards for forest industry
StatuS and trendS of the Global-Pacific Rim foRest industRy
the role of australia and new Zealand
Wednesday 3 - Friday 5 November, 2010
Bayview Eden HotelMelbourne
auStralia
Monday 8 -Tuesday 9 November, 2010
Energy Events CentreRotorua
new Zealand
Visit the conference web site for full details of the program, speakers, field trip, accommodation and registration.
www.prcc.com.au/dana2010
Contact:conference organiser:
PR conference consultants – ms Pamela Richardstel: + 61 3 5781 0069. email: [email protected]
All stakeholders involved in two-year consultation
Geoff Gorrie .. review a concentrated and collaborative process.
Dr Paul Briggs .. chair, SRC for Sustainable Forest Management
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 141 | 06.09.10 8
TWO Queensland foresters are helping with a hybrid agroforestry system in the Solomon Islands that could provide villagers with a continuous stream of food and cash crops – and a valuable export market.Dr Tim Blumfield, a senior research fellow at the Griffith University’s environmental futures centre, says the project is aimed at reversing the unsustainable logging of native forests in the Solomons.“The project hopes to give village groups a sustainable living by planting local species,” Dr Blumfield said.“Introduction of the hybrid agroforestry system is designed
to allow villagers to have a continuous stream of food or cash crops from the same land where high quality timber, such as teak and mahogany is being grown for the export market.”Dr Blumfield is working with Dr Gary Bacon, adjunct professor at Griffith’s centre for forestry and horticultural research.The system uses a local tree, Flueggea flexuosa, which is traditionally an important source of durable, round timber for companion planting with teak. The local tree, which is capable of producing useful timber in a few years, is then progressively harvested, effectively thinning the stand and allowing the teak to attain desirable growth and form and then grow on to
harvestable size in 20 years.Dr Blumfield is involved in a number of projects, including his role as project coordinator for improving silvicultural and economic outcomes for community timber plantations in the Solomons by interplanting with Flueggea flexuosa and other Pacific agroforestry species as part of an Australian Centre for International Agricultural Research overseas programs. The project works with the Ministry of Forestry, the School of Natural Resources and the Solomon Islands Association of Rural Training Centres to promote the hybrid agroforestry system through a series of scientific trials, demonstration plots and thinning trials.Solomon Islands teak is currently being assessed for wood quality at different age classes at the Department of Employment, Economic Development and Innovation’s Salisbury research centre in Brisbane. Trial results are expected soon.Teak was introduced into the Solomon Islands on an ad hoc basis throughout the colonial era, with stands scattered throughout the archipelago. There were few if any records kept and the origins of the stands were lost.One of the scientific officers working for the Ministry of Forestry established a seed orchard using material from the best of these trees. This has formed the basis of the current Solomon Islands provenance, which shows good form with little branching and a very straight habit.“The growth rate is spectacular,” Dr Blumfield said.
FORESTRY
Cont Page 9
Hybrid agroforestry system promiseshigh yields, returns for solomons teak
Our Services. Your advantage.
ProfiRip series WEINIG optimising and gang rip saws from the ProfiRip RaimannLine series stand for flexibility, maximum yield and cost minimisation for cutting. They can be fitted quickly thanks to Quickfix and are highly profitable with up to six adjustable saw blades. Even higher wood yields can be achieved by using the intelligent rip sawing optimisation software Timbermax or RipAssist. ProfiRip puts you one crucial step ahead of the competition!
Your WEINIG expert at www.weinig.com
WEINIG OFFERS MORE
Commercial trials under way at Salisbury research centre
Dr Gary Bacon and Dr Lex Thomson (team leader, Facilitating Agricultural Commodity Trade) examine five-year old teak (Tectona grandis) growing in a small wood lot outside Honiara. One of the trees measured had a DBHOB of 35 cm, a growth rate not uncommon in the Solomon Islands.
Advertising: Tel +61 7 3256 1779 Email: [email protected] 9issuE 141 | 06.09.10 | PAgE
When ACIAR started the project for silvicultural and economic outcomes for community timber plantations in 2008 – by interplanting with Flueggea flexuosa and other Pacific agroforestry species – the quality of the timber was unknown.Integrated Tree Cropping (ITC), now known as Elders Forestry, had taken over a property at Mount Rae in the eastern Cape York Peninsula which had a small stand of teak planted around 2002. This was the oldest available Australian teak available for comparison with the Solomon Island teak.ITC provided 15 stems from the six-year-old plantings to the DEEDI testing facility at Salisbury. In turn, the project has sourced 15 stems from each of the 6, 10 and 15-year-old classes of Solomon Islands provenance teak and 15 stems from size classes of Flueggea flexuosa form tests to establish its commercial suitability with regard to characteristic properties.Timbers deemed suitable will be processed and assessed for commercial applications such
as flooring, furniture making, mouldings and for window/door making.The project is also working with companies within the Solomon Islands to examine means of value adding in-country.“There has been no real market for thinnings but we are testing suitability for producing veneer from thinned stems in conjunction with Eagon Pacific Plantation Ltd and are also working with local carpenters to produce furniture,” Dr Blumfield said.It is hoped the results from this testing will provide information about age/size when thinned stems have a commercial value.“Currently, all thinnings are pre-commercial, depriving growers of potential income and deepening the reluctance of growers to thin which has resulted in over-stocked plantings around the country,” Dr Blumfield said.“Information on the properties of older stems will highlight the commercial value of Solomon Island grown teak that will compare favourably with the teak grown in countries such as Burma and India.”
Timber & Forestry e-news is the most authoritative and quickest deliverer of news and special features to the forest and forest products industries in Australia, New Zealand and the Asia-Pacific region. Weekly distribution is over 6,400 copies, delivered every Monday. Advertising rates are the most competitive of any industry magazine in the region. Timber&Forestry e-news hits your target market – every week, every Monday!
HEAD OFFICECustom Publishing Group
unit 2- 3986 Pacific highwayLoganholme 4129 Qld, Australia
PUBLISHERDennis Macready
CONSULTING EDITORJim Bowden
Tel: +61 7 3256 1779Mob: 0401 312 087
ADVERTISINGTel: +61 7 3256 1779
PRODUCTION MANAGERLeigh Macready
Tel: +61 7 3841 [email protected]
Opinions expressed on Timber & Forestry e news are not necessarily the opinions of the editor, publisher or staff. We do not accept responsibility for any damage resulting from inaccuracies in editorial or advertising. The Publisher is therefore indemnified against all actions, suits, claims or damages resulting from content on this e news. Content cannot be reproduced without the prior consent of the Publisher- Custom Publishing Group.
FORESTRY
From Page 8
Dr Gary Bacon (standing left) and Dr Tim Blumfield (seated right) meet with the Permanent Secretary and Commissioner of Forests and staff in Honiara.
Trials show valuein using thinnedstems for veneers
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 141 | 06.09.10 10
THE Institute of Foresters of Australia is an organisation with members focused on improving the management of forests in Australia and internationally.Many of our members have worked alongside or within environmental non-government organisations (ENGOs) to achieve sustainable solutions to forestry issues throughout the world. Some members have also worked under oppressive regimes where the threat of violence and intimidation are the rule, but solutions have still been achieved.Members of the IFA Tasmanian division were informed recently that the current forest industry/ENGO discussions in Tasmania have involved tactics that mirror those of the most oppressive regimes.They were advised by a participant in those discussions that some ENGO members have directly threatened industry representatives and promised to destroy their businesses unless they agree to a total phase out of native forest utilisation and adoption of the ENGO preferred certification process.These ENGO representatives reject all attempts at compromise. In this day and age, with more individuals recognising that forestry is one of the most self sustaining industries that this country has
to offer, is this overbearing nasty approach really necessary or worthwhile? In fact, no less than the International Panel on Climate Change has endorsed sustainable forest management,
including harvesting of timber from native forests, as the most effective way to mitigate climate change.It is apparent that some ENGO representatives’ idea of negotiation and compromise is equal to those employed by despots high on the euphoria that oversized egos produce. Essentially, they have been corrupted by power. Their lack of concern and empathy shown for the communities and the thousands of Tasmanians reliant on this fertile industry called forestry is testament to this.In addition, they choose to ignore the overwhelming evidence in support of sustainable forest management practices in Tasmania in the pursuit of an idealised and unrealistic expectation that cessation of
native forest silviculture will protect those forests.The IFA supports improving environmental and community benefits associated with active sustainable forest management. This can only be achieved through open, transparent and honest negotiation and agreement.It is clear the forest industry/ENGO discussions are not based on these principles. IFA hopes that despite the outcome of these discussions, there will be a further process that engages the wider community and focuses on balanced, long term, science based outcomes that recognise the contribution of native forests to the environmental, social and economic well being of Australia.
A REPORT prepared by CPI Strategic commissioned for Timber Communities Australia has highlighted the consequences of decisions made by “Melbourne-centric” state governments that have severely impacted on the timber industry and its dependent communities.TCA southeast regional coordinator, Trevor Brown said state government decisions over the past 30 years had
significantly reduced timber harvesting in Victoria.“These decisions have directly and indirectly resulted in the closure of at least 93 mills,” he said.“With these closures came the loss of around 2500 mill jobs and many more in businesses that rely on the timber industry.“These mill closures have been caused by decisions made in Melbourne by university educated ministers and
premiers, who are advised by a white-collar bureaucracy that do not understand or want to understand the situation of timber workers.”
According to the report, there have been two major periods of timber industry contractions – in 1986-87 and 2002 – both caused by major reductions in the accessibility of harvestable timber caused by state Labor government decisions.
OpEN lETTER
Trusted brokers to the timber industry since 1985Be SURE about INSURANCE
Contact Alan JonesTel: (07) 3010 1823 Mob: 0419 754 681 Email: [email protected]
(Licence No. 238123)
say NO to the environmental mafia
PeTeR VOLKPresident
institute of Forestersof Australia
BY
White collar Labor has decimated blue collar forestry: TCA report
Advertising: Tel +61 7 3256 1779 Email: [email protected] 11issuE 141 | 06.09.10 | PAgE
Organisers expect Aussies will fly directly into the newly developed Rotorua International Airport for the festival.The festival from September 5 to 9 in Rotorua and the Bay of Plenty will include a range of activities, conferences, exhibitions, displays and competitions leading up to Rotorua’s first Rugby World Cup Game on Saturday, September 10.General manager of the Destination Rotorua Economic Development Unit Grant Kilby says the Rugby World Cup offers enormous opportunities to industries across New Zealand – not just tourism – and the forestry sector also stands to significantly benefit from the high profile international rugby event.The latest estimations indicate that more than 85,000 visitors will travel to New Zealand during the event from September 5 to 9 next year.The festival will include Forest Industries 2011 (FI2011), the four yearly forest expo, a wood solutions symposium and the National Wood Sector Conference with international delegates focusing on market-led wood applications.
Other activities include in-forest demonstrations of forestry and harvesting machinery, technical workshops, a high profile networking event, an open day at the Waiariki Polytechnic Forestry Centre of Excellence, as well as a fun festival in Kawerau the weekend before the opening of the festival in Rotorua.In Sydney next week, Tourism NZ will present a broad range of attractions and activities in the epicentre of tourism and events – the Bay of Plenty promoted as ‘Central Park NZ’.Timber & Forestry enews will be ‘free loading’ in Sydney to capture all the action. Full report next issue.
INDUSTRY NEWS
New Zealand forest festival
Grant Kilby .. enormous opportunities.
From Page 6
Coalition commits $20mto forest contractors fundCOALITION spokesman for forestry Senator Richard Colbeck has met with Tasmania’s forestry industry to discuss the significant issues facing forest contractors.“During the election campaign, the Coalition committed to provide $20 million immediately to forest contractors to begin a restructure within the sector,” Senator Colbeck said.“We committed to engaging with forest contracting
organisations to determine how best to distribute these funds in a timely fashion. This commitment stands.
“Labor only promised to match the Coalition’s commitment to forest contractors in a last-minute, panicked policy announcement.”
Senator Colbeck said the Coalition was committed to protecting jobs in the forestry industry.
* Independently tested to the highest standard; guaranteed to comply with Australian standards; certified under JAS-ANZ accredited product certification scheme; guaranteed to be safe and to carry the designated design load; complies with the Building Code of Australia; meets safety and quality requirements accepted by unions; meets all Workplace Health & Safety requirements.
Engineered Wood Products Association of AustralasiaPlywood House, 3 Dunlop Street, Newstead 4006, Queensland, Australia
Tel: 61 7 3250 3700 Fax: 61 7 3252 4769 Email: [email protected]: www.ewp.asn.au
EWPAAg u A r A n t E E d *
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 141 | 06.09.10 12
TWO Queensland timber merchants who have converted to chain of custody certification want to send a clear message to the wood supply trade: the system is simply SOP – standard operating procedure.“Not now, but soon, merchants will face an increasing demand for certified wood; already we are quoting ahead on commercial contracts that specify chain of custody,” says Peter Watt of Watts Wood and Mouldings Pty Ltd at Salisbury, a Brisbane southside suburb.Justin Lanyon, managing director of 5 Star Timbers at Stapylton on the Brisbane-Gold Coast corridor, agrees, adding: “It wasn’t that hard at all, to be honest. Certification involved very little extra work for us; the requirements were simply the standard operating procedures of any business.”Both merchants were certified for AS 4707 chain of custody after auditing by Simon Dorries, general manger of the Engineered Wood Products Association of Australasia.“There was little disruption to our business; Simon completed the approval in half a day and reckoned it was one of his easiest audits,” Peter Watt said.“This was because all our systems were in place and we’d done the lead-up work first, which was always my principle aim of achieving certification with a minimum of fuss.“If you have a basic auditing system and follow the normal accounting procedures, it’s pretty easy to track along the supply chain.”Watts Wood and Mouldings, a compact five-man operation, stocks a wide selection of hardwoods and softwoods, mostly for the furniture and commercial building trades.“Most of our hardwoods are
AFS certified, like spotted gum drawn from a sustainable resource by our suppliers the Parkside Group and Hurfords. In fact, all of our Australian eucalypts, including Victorian ash and jarrah, are certified.”
Mr Watt said South African plantation timbers, backed by forest certification papers, had also earned an Australian CoC brand, because of their alliance with the Program for the Endorsement of Forest Certification (PEFC).“Although we don’t have a lot of inquiry for certified wood yet, four new clients in recent months placed orders knowing we were taking on chain of custody.”Mr Watt said his timber stocks were not physically separated
as certified or non-certified wood, but all packs were tagged appropriately. “It’s the way we structure our system in each storage bay.”Justin Lanyon said it was easy to adapt to a chain of custody system.“We had everything pretty well set up before the audit. We only needed to change the computer’s descriptions of our timber, so we can now easily determine certified from non-certified packs at the click of a button,” he said.Mr Lanyon admitted hardwoods, which were sourced from several mills, might not have AFS certification. “A problem with the smaller milling operators, who do sell good wood – and it’s about as ‘green’ as you can get – is that they just don’t have the time, manpower or resources, and perhaps neither the inclination, to certify their product. They are happy enough to cut board for anyone.
“But although risk assessment shows it is coming from legal sources, we must be careful this doesn’t become the normal practice. There needs to be some kind of branding, but chain of custody is the best way to go.”Mr Lanyon said an important point about chain of custody was that his timber operation had the policies and procedures in place and could assure exacting customers it had aspired to certification to give them peace of mind.“We are aware some timber merchants avoid CoC certification ‘because of the extra work’ and because they are buying timber from an already certified supply source, so I can see where they are coming from. As more and more suppliers get certified there is going to be a belief that there is less need for merchants to get certified.“But we are going to end up with a situation where those at the top of the ‘food chain’ are going to be certified, and they will reap the benefits from government work.“So I go back to the whole concept of chain of custody and why we adopted it – that is the chain doesn’t get broken and this removes the possibility for entry of any illegal product along the stream.“Right now, we can give a guarantee that this chain has not been broken – and it can’t be tampered with. I am sure this message will be pushed down to merchants from suppliers at the top of the chain.”But, honestly, for our operation, there was very little extra work for us in the CoC audit and little cost. It takes only a short time to set up and it pretty well feeds on itself with an occasional re-visit through
cERTIFIcaTION
CoC is nothing more than sOP
Yard manager Michael Golden checks a stack of Victorian ash timber tagged as chain of custody certified at Watts Wood and Mouldings in Brisbane.
Two merchants find certification an easy task
Cont Page 13
‘if you have a basic auditing system and follow the normal accounting procedures, it’s
pretty easy to track along the supply chain’ – Peter Watt
Advertising: Tel +61 7 3256 1779 Email: [email protected] 13issuE 141 | 06.09.10 | PAgE
AUSTRALIAN industry is cautiously monitoring a new ‘legal harvest standard’ that has been released on the heels on the European Parliament vote in favor of a ban on illegally harvested timber and products made from illegal wood.Together with the US Lacey Act, the EU ban prohibits illegally harvested timber in the world’s largest markets for wood products.“We developed the Legal Harvest standard to help forest product businesses prepare for sweeping regulations like the EU ban and the expansion of Lacey,” says Dr Robert J. Hrubes, senior vice-president of Scientific Certification Systems, the US-based environmental certification company that developed the new standard.“By being verified to our standard, companies can demonstrate due care in sourcing legally harvested wood products,” he says.The new EU ban and the 2008 expansion of the Lacey Act
mean that companies that sell timber and timber products, such as furniture and flooring, will now be required to perform due diligence to ensure that any timber used was logged and procured legally. Fines and confiscation of product are among the strict penalties for those companies out of compliance.“Legal Harvest verification provides the kind of stringent oversight needed to protect the world’s forests,” says Scott Poynton, director of The Forest Trust, a leading non-
profit organisation that focuses on forest conservation. “We applaud the approval of this standard and look forward to seeing the forest product industry increase its capacity for responsibly harvested wood.”Scientific Certification
Systems is a global leader in
independent certification and
verification of environmental
stewardship and sustainability.
For more than 25 years, SCS
has developed internationally
recognised standards and
certification programs that
ensure the highest level of
environmental performance
and social accountability for its
clients.
SCS is a founding member
of the Forest Stewardship
Council.
the audit process. It’s a living, breathing document.”[Independent third-party certification bodies, such as EWPAA, are quoting auditing fees of about $800 a day with an annual fee of $1000 per certified site].Set up 2½ years ago, 5 Star Timbers is a relatively new player in the timber retail market supplying landscape, structural, flooring, doors and mouldings along the eastern seaboard to Coffs Harbour and up as far as Mackay in north Queensland.Owner-directors include Justin Lanyon’s wife Jenny, father Colin, and Wayne Culph.
The staff of seven are thankful to be linked into Colin Lanyon’s 45 years in the industry which includes hardwood and softwood sawmill management,
preservation plant management, and timber merchandising.Chief executive of the Australian Forestry Standard Kayt Watts said both Peter Watt and Justin Lanyon had shown foresight and achievement in obtaining chain of custody certification for their companies.“They are correct when they say CoC is nothing more than standard operating procedure,” Ms Watts said.“While CoC may still not be considered by many as standard procedure, these two merchants have shown best business practice by engaging in the process now and demonstrating their corporate and social
commitment to sustainable forest management.”
Ms Watts said her on-going visits to merchants and explanation of the process had made many of them aware that CoC fitted into their normal operations at no greater cost than any other business improvement.
Note: Chain of custody (CoC) is the process of tracking wood and forest products that originate from certified forests and pass through all phases of ownership, transportation, and manufacturing from the defined forest area to the final product and delivery to the end consumer.
Unbroken chain removes possibilityof llegal wood entering supply stream
cERTIFIcaTION
Kayt Watts .. on-going visits to merchants.
From Page 12
revision support to the SRCs.
The company is a consultancy specialist with expertise in the Australian and regional forestry and forest products industries and in stakeholder identification and management.
Geoff Gorrie emphasised:
“Revision of the Australian Standards for Forest Management and wood products Chain of Custody will require significant support from industry, government and all stakeholders.“We will soon be engaging with industry partners and the federal government to discuss
assistance options. Needless to say, the revision process cannot be completed without considerable support.”
For further information contact: Kayt Watts, CEO, AFSL, on (02) 6122 9000 or email [email protected]
From Page 12
AFs standards review process
Confusion? Another standard for legal wood
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 141 | 06.09.10 14
KEY speakers have been confirmed for the forest industry development conference in Melbourne next Thursday, September 9.Global certification schemes will be addressed in a lively early session by William V Street, global president, PEFC, and Corey Brinkema, US president, FSCGreg L’Estrange, chief executive of Gunns, will deliver the opening address of the conference, to be held at Sofitel Melbourne on Collins.Other key speakers include Vince Erasmus, CEO, Elders Forestry, Greg McCormack, president, National Association
of Forest Industries, Milo Foster, vice-president-Asia, Family Care, Kimberly-Clark Australia, Malcolm Tonkin, manager, stewardship and asset program systems, HVP Plantations, Michael O’Connor, national secretary, forestry and furnishing products division, CFMEU, Jim Adams, CEO, Timber Communities Australia, Rob de Fegely, consultant and former head of Poyry Management Consulting, Bob Gordon, managing director, Forestry Tasmania, Bob Smith, consultant and ForestWorks’ special representative on Climate Change and Michael Hartman, chief executive of
ForestWorksFederal minister for forestry Tony Burke has been invited to deliver the conference opening address and Senator Eric Abetz, leader of the Opposition in the Senate, is a confirmed speaker.On illegal losing issues, the conference will hear from Kevin Hill, founder of Double Helix Tracking Technologies, which introduced the world’s first commercially proven DNA-based timber verification system.DoubleHelix has embarked on an international effort to establish a DNA geno-graphic database of high-profile
commercial timber species. The company has high level government contacts in the US, Europe, Asia and Australia and an extensive global network covering both environmental NGOs and major players in the timber industry.An industry liaison dinner for conference delegates, speakers and special guests will be held at the Regent Theatre on Collins Street on Thursday evening.An exclusive industry investors’ seminar on September 8 – The Future for Plantation Forestry Investment in Australia – will put four world leading experts on plantation investment in the same room.
EvENTS
Hoo-Hoo industry bus tour is on againClub raises thousands of dollars for children’s charitiesBRISBANE’S timber industry club Hoo-Hoo 218 which has donated more than $49,960 to children’s charities over the past three years has preparations under way for another big fund-raiser next year – the third annual industry bus tour.The bus tour visited industry operations in southeast Queensland in 2009 and in Northern NSW this year.“We plan to take the tour further south next year, possibly into Victoria,” said Alan Jones who was elected new club president at the annual general meeting last week.Outgoing club president Pieter Verlinden said had been proud to lead a service organisation that combined activities to promote industry with social events while at the same time providing financial support for disadvantaged children.Charities supported this year included the Police Citizen Youth Club, Golden Casket Variety Special Children’s Christmas Party, the Queensland Blue Light Association, Children’s Circus Spectacular, the Royal
Children’s Hospital Foundation and the Australian Lung Foundation.The club also donated $2000 to an industry fund that assisted the Victorian Association of Forest Industries in its appearance on behalf of industry at the Victorian Bushfires Royal Commission.
The club has further pledged $5000 to the Family and Kid’s Care Foundation and $5000 to Phoenix House Australia.Mr Jones, an insurance broker with mainstream business in the timber industry, becomes the 39th president of Brisbane Hoo-Hoo Club 218. A principal of Austbrokers Premier, he has
been in the insurance business for 46 years.
He attended the AGM after completing a nine-day 3500 km journey in a 1975 Kingswood sedan as part of the Variety Club’s 21st annual Bush Bash which saw more than 100 vehicles travel from the Gold Coast to Port Douglas in far north Queensland.
The event attracted 420 ‘bashers’ and raised more than $1.2 million for disadvantaged children.
Pieter Verlinden, a consultant in the truss and frame industry, takes on the role of Club 218 secretary and continues as second vice-president of J1V jurisdiction of Hoo-Hoo International.
Other club members elected to the committee were Peter Mort (treasurer), Alf Chapple (membership), Jim Bowden (watchdog) and a ‘coalition’ of social/industry event directors – Tim Evans, John Muller and Don Towerton.
Gathering at Brisbane’s Norman Hotel at Woolloongabba for the annual general meeting of Brisbane Hoo-Hoo Club 218 are club directors, seated from left, Don Towerton, Peter Mort, Alan Jones (new president), and Pieter Verlinden, and standing, from left, Tim Evans, Alf Chapple, John Muller and Jim Bowden.
set to go for Melbourne conference!
Advertising: Tel +61 7 3256 1779 Email: [email protected] 15issuE 141 | 06.09.10 | PAgE
GYMpIE HaRDWOODS WORKSHOp
Please fill up the following details for visitor/ buyer registration:
+60 3 9282 8999 / 7803 3276
INVITATIONThe Malaysian Timber Council (MTC) cordially invites you to the inaugural MTC Global WoodMart (MGW) 2010 which will be held in Kuala Lumpur on 19 - 20 October 2010.
MGW 2010 will be the first “One-Stop Selling and Buying” platform in the South East Asian region for international suppliers and buyers to meet and conduct business.
Company Name:
Post code: Country:
COMPANY DETAILS
DETAILS OF REPRESENTATIVE(S)
Name (please write surname in BLOCK LETTERS)
1.
Designation: Mobile:
2.
Designation: Mobile:
Why you should visit?1. The first dedicated business exchange for producers, importers, exporters,
manufacturers, distributors and agents of wood products.
2. Business Matching meetings for international buyers with exhibitors from Malaysia and other key supplier countries.
3. An excellent platform for business networking, especially for establishing linkages with timber industry members from fast-growing Asian economies, notably China and India.
Wood Products and Panels
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 141 | 06.09.10 16
ClassifiedsWhy taking an ad with usis the best value for you!
• More than 6,500 deliveries and 15,000 viewers each week
• Read and re-read everyday as the most authoritative industry information medium
• Best rates, best service - unbeatable
• Faster, wider penetration of your message in Australiasia than any other industry publication
• Adverts take readers and potential clients direct to websites
Contact Timber & Forestry EnewsTel: +61 7 3256 1776
Email: [email protected]
NOW .. FROM SPIDA SAWSDocuCentre-IV C2270
W.C. log saw – LH/RH InfeedValue: $NZ75,000.
Special price $NZ37,500!
designed to cut logs 300 mm at 90 deg and 150mm at 45deg. a manual system that can be automated or altered to any specifications within reason.this is a complete system (see illustration) sPida has been designing and building machinery for more than 30 years. sPida saws are known for their reliability and accu-racy. through product innovation and development, sPida has continued to build quality machinery that best meets our customers’ needs.
New Zealand Head Office - Rotoruatel: + (64) 7 345 8088. fax: + (64) 7 345 8087
freephone: new Zealand: 0800 774 327. australia: 1800 146 110.
email for specifications: [email protected]
Advertising: Tel +61 7 3256 1779 Email: [email protected] 17issuE 141 | 06.09.10 | PAgE
Advertising SalesCustom Publishing GroupT: (07) 32561776e: [email protected]
ProductionT: (07) 3392 9810e: [email protected]
www.industryenews.com.au
Timber & Forestry e news is publishedby Custom Publishing Group.
Timber & Forestry e news is a full colour e magazineemailed every Monday to Decision Makers withinthe Australian and New Zealand Timber and Forestrysectors.
Advertising is booked with a minimum 4 weekbooking with discounts for 12, 24 and 48 weekbookings.
12 week- 7.5% Discount24 week- 10% Discount48 week- 15% DiscountClassified ads can be booked in a per issue basis.All advertisements link to customer websites oremail address with an option for rich text (flash).
BENEFITS:
DIRECT PENETRATION via email.WEEKLY opposed to monthly alternatives.NEWS that is up to date that will ensure readership.COST EFFECTIVE advertising rates.
All prices quoted plus GST and based on Art being supplied.We can create artwork if required – Eighth/Quarter $44 Half $66 which will be billed if complete art is notsupplied to our specifications.
Video: Maximum 3 meg swf file. Animation: gif file
Due to the regularity of timber & forestry e news and the tight deadlines no customer proofs can be sent.
SDisplay Ads
Rate Size Specificationsper Issue + GST Height x Width
Full Page Bleed $330 303mm x 216mm Half Page Vertical $182 254mm x 93mm Half Page Horizontal $182 125mm x 190mm Third Page Horizontal $143 73mm x 190mmQuarter Page Vertical $120 125mm x 93mmEighth Page $72 60mm x 93mmFront Page Third Horizonal $176 73mm x 190mmFront Page Masthead $77 33mm x 45mm
Classifieds
Half Page Vertical $182 220mm x 93mm
Quarter Page Vertical $120 107mm x 93mm
Eighth Page Horizontal $72 51mm x 93mm
Full Page Bleed $330 303mm x 216m
Display Ads Minimum 4 issue booking
Classified Ads per week
Extras: Video and Animated ads - Add 20% per issue
Artwork Specifications: Please supply all artwork as High Resolution (300dpi) Pdf’s or jpegs.Send artwork to [email protected]
DEADLINES Booking – Noon Wednesday for Monday edition. Material – Noon Thursday
Terms: Account Clients- 14 days New Accounts: Payment on Booking All Classifieds- Payment on booking (Credit card preferred)
RATES
T: (07) 3841 8075