ispmach4256zebreakoutboardevaluationkitusersguide

March 2012Revision: EB65_01.1

ispMACH 4256ZE Breakout Board Evaluation Kit

Users Guide

2ispMACH 4256ZE Breakout Board Evaluation Kit Users Guide

IntroductionThank you for choosing the Lattice Semiconductor ispMACH 4256ZE Breakout Board Evaluation Kit!

This users guide describes how to start using the ispMACH 4256ZE Breakout Board, an easy-to-use platform for evaluating and designing with the ispMACH 4256ZE CPLD. Along with the board and accessories, this kit includes a pre-loaded hardware test program. You may also reprogram the on-board ispMACH 4256ZE device to review your own custom designs.

Note: Static electricity can severely shorten the lifespan of electronic components. See the Storage and Handlingsection for handling and storage tips.

FeaturesThe ispMACH 4256ZE Breakout Board Evaluation Kit includes:

ispMACH 4000ZE Breakout Board The board is a 3 x 3 form factor that features the following on-board components and circuits:

ispMACH 4256ZE CPLD (LC4256ZE-5TN144C) USB mini-B connector for power and programming Eight LEDs 4x15 prototype area Four 2x20 expansion header landings for general I/O, JTAG, and external power 1x8 expansion header landing for JTAG 3.3V and 1.8V supply rails

Pre-loaded Demo The kit includes a pre-loaded counter design that highlights use of the embedded ispMACH 4000ZE oscillator and programmable I/Os configured for LED drive.

USB Connector Cable The board is powered from the USB mini-B socket when connected to a host PC. The USB channel also provides a programming interface to the ispMACH 4256ZE JTAG port.

Lattice Breakout Board Evaluation Kits Web Page Visit www.latticesemi.com/breakoutboards for the latest documentation (including this guide), demo designs, and drivers for the kit.

The content of this users guide includes demo operation, programming instructions, top-level functional descrip-tions of the Breakout board, descriptions of the on-board connectors, and a complete set of schematics.


Figure 1. ispMACH 4256ZE Breakout Board, Top Side

Left SideTwo 2x20 HeaderLandings (J3, J4)

LED Array 4x15 Prototype Area

Right SideTwo 2x20 Header Landings (J5, J6)

USB Interface(J2)

JTAG Header Landing(J1)

Storage and HandlingStatic electricity can shorten the lifespan of electronic components. Please observe these tips to prevent damage that could occur from electro-static discharge:

Use anti-static precautions such as operating on an anti-static mat and wearing an anti-static wrist-band. Store the evaluation board in the packaging provided. Touch a metal USB housing to equalize voltage potential between you and the board.

Software RequirementsYou should install the following software before you begin developing new designs for the Breakout board:

FTDI USB Hardware Drivers (www.latticesemi.com/breakoutboards) or ispVM System 17.9 (required for re-pro-gramming)

Optional: ispLEVER Classic 1.4 (ispMACH 4000ZE CPLD support)

Demonstration DesignLattice provides a pre-programmed demo to illustrate basic operation of the ispMACH 4256ZE CPLD device. The design integrates an up-counter with the on-chip oscillator and timer (OSCTIMER) hardware feature. The design alternates to CPLD outputs, illuminating LEDs D1, D3, D5 and D7 then LEDs D2, D4, D6 and D8.

Note: To restore the factory default demo or program it with other Lattice-supplied examples see the Download Demo Designs section of this document.


The preprogrammed demonstration design is an up counter and an output multiplexer to drive an LED array. The demo shows a clock generator based on the ispMACH 4256ZE on-chip oscillator and timer (OSCTIMER) hardware feature. The counter module is clocked at = 2

0

1

Run the Demonstration DesignWARNING: Do not connect the Breakout Board to your PC before you follow the driver installation procedure of this section.

Communication with the Breakout Board with a PC via the USB connection cable will require the FTDI chip USB hardware drivers contained in the Software Requirements section. Loading these drivers enables the computer to reliably recognize and program the Breakout Board. Drivers are distributed by Lattice as a stand-alone package or with ispVM System version 17.9 or later. Use one of the two procedures below to install.

To load the FTDI chip USB hardware drivers via ispVM System:

1. Browse to www.latticesemi.com/breakoutboards and download ispVM System software.

2. Install ispVM System software.

3. Run ispVM System. Choose ispTools > Install/Uninstall LSC USB/Parallel Port Driver.The LSC 32/64-Bit USB Drivers Install/Uninstall dialog appears.

4. Select FTDI USB 32-Bit Driver or FTDI USB 64-Bit Driver then click Install.After a few moments, ispVM will indicate the installation is complete.

5. Click OK, then click Close from the LSC 32/64-Bit USB Drivers Install/Uninstall dialog.

6. Choose File > Exit to close ispVM System.

7. Connect the USB cable from a USB port on your PC to the boards USB mini-B socket (J2). After connection is made, a green Power LED (D9) will light indicating the board is powered on.

8. Red LEDs will light and start to flash according to the preprogrammed demonstration design.

See the Troubleshooting section of this guide if the board does not function as expected.


To load the FTDI chip USB hardware drivers via the stand-alone package:

1. Browse to www.latticesemi.com/breakoutboards and download the FTDI chip USB Hardware driver package.

2. Extract the FTDI chip USB Hardware driver package to your PC hard drive.

3. Connect the USB cable from a USB port on your PC to the boards USB mini-B socket (J2). After connection is made, a green Power LED (D9) will light indicating the board is powered on.

4. If you are prompted, Windows may connect to Windows Update select No, not this time from available options and click Next to proceed with the installation. Choose the Install from specific location (Advanced) option and click Next.

5. Search for the best driver in these locations and click the Browse button to browse to the Windows driver folder created in the Download Windows USB Hardware Drivers section. Select the CDM 2.04.06 WHQL Certified folder and click OK.

6. Click Next. A screen will display as Windows copies the required driver files. Windows will display a message indicating that the installation was successful.

7. Click Finish to install the USB driver.

8. Red LEDs will light and start to flash according to the preprogrammed demonstration design.

See the Troubleshooting section of this guide if the board does not function as expected.

Download Demo DesignsA demo is preprogrammed into the Breakout Board, however over time it is likely your board will be modified. Lat-tice distributes source and programming files for demonstration designs compatible with the Breakout Board.

To download demo designs:

1. Browse to the Lattice Breakout Board web page (www.latticesemi.com/breakoutboards). Select the ispMACH 4256ZE Demo Application download and save the file.

2. Extract the contents of ispMACH4256ZE_BB_Eval_Kit_v01.0.zip to an accessible location on your hard drive.

The demo design directory, LC4256ZE_CTL, is unpacked.

Recompile a Demonstration Project with ispLEVER ClassicUse the procedure described below to recompile a demo project for the Breakout Board. 1. Install and license ispLEVER Classic software.

2. Run the ispLEVER Classic Project Navigator.3. Browse to the demo design directory, LC4256ZE_CTL, and open the LC4256ZE.syn project file.4. From the Source in project window, select the target device.

The Fit Design process appears in the Processes for current source window.

5. Select Fit Design, right-click and choose Start.After a few moments the JEDEC programming file is output.

6. See the Programming with ispVM section for details on downloading a programming file to the board.


Programming with ispVMA demonstration design is pre-programmed into the Breakout Board by Lattice. To restore a Breakout Board to fac-tory settings or load an alternative demo design, use the procedures in this section.

To install ispVM programming tools:

1. Install and license ispVM System software.

2. Connect the board to a host PC using the USB port header connection.

3. Follow the USB Cable Interface procedure below to program the evaluation board.

The Breakout Board is equipped with a built-in USB-based programming circuit. This consists of a USB PHY and a USB connector. When the board is connected to a PC with a USB cable, it is recognized by the ispVM System soft-ware as a USB Download Cable. The ispMACH 4256ZE can then be scanned and programmed using the ispVM System software.

To program a demo programming file:

1. From the Start menu run ispVM System.ispVM appears.

2. Choose Options > Cable and IO Port SetupThe Cable and I/O Port Setup dialog appears.

3. Make the following selections:

Cable Type: USB2Port Setting: FTUSB-0

Click OK.

4. Choose ispTools > Scan Chain.The New Scan Configuration Setup window appears. The LC4256ZE device appears in the device list.

5. Right-click the LC4256ZE entry and choose Edit DeviceThe Device Information dialog appears.

6. From the Data File section, click the Browse button.The Open Data File dialog appears.

7. Browse to the folder, select .jed, and click Open. From the Operation list choose Erase, Program, Verify and click OK.

8. Choose Project > Download.ispVM reprograms the evaluation board.

Programming requires about 10 seconds. A small timer window will appear to show elapsed programming time. At the end of programming, the configuration setup window should show a PASS in the Status column.

ispMACH 4256ZE Breakout BoardThis section describes the features of the ispMACH 4256ZE Breakout board in detail.

OverviewThe ispMACH 4256ZE Breakout Board is a complete development platform for the ispMACH 4256ZE CPLD. The board includes a prototyping area, a USB program/power port, an LED array, and header landings with electrical connections to most of the CPLDs programmable I/O, power and JTAG pins. The board is powered by the PCs


USB port or optionally with external power. You may create or modify CPLD program files using ispLEVER Classic software and reprogram the board using ispVM software.

Figure 3. ispMACH 4000ZE Breakout Board Block Diagram

ispMACH4256ZE-5TN144C

2x20 Header Landing (J3)

LEDArray

20 GPIO

USBController

USB Mini B Socket

A/Mini-BUSB Cable JTAG

Programming 8


35 GPIO


40 GPIO


15 GPIO

1x8 JTAG Header Landing (J1)

8

Table 1 describes the components on the board and the interfaces it supports.

Table 1. Breakout Board Components and Interfaces

Component/Interface Type Schematic Reference DescriptionCircuitsUSB Controller Circuit U2: FT2232H USB-to-JTAG interface and dual USB UART/FIFO ICUSB Mini-B Socket I/O J1:USB_MINI_B Programming and debug interfaceComponents

LC4256ZE CPLD U4: LC4256ZE-5TN144C 256-macrocell CPLD packaged in a 20 x 20mm, 144-pin TQFPInterfacesLED Array Output D8-D1 Red LEDs

Four 2x20 header landings I/OJ3: header_2x20J4: header_2x20J5: header_2x20J6: header_2x20

User-definable I/O

1x8 header landing I/O J1: header_1x8 Optional JTAG interface4x15 prototype area J9 Prototype area 100mil centered holes

SubsystemsThis section describes the principle subsystems for the ispMACH 4256ZE Breakout Board in alphabetical order.

Clock SourcesAll clocks for the counter demonstration designs originate from the ispMACH 4256ZE CPLD on-chip oscillator and timer (OSCTIMER) block. You may use an expansion header landing to drive a CPLD input with an external clock source.

Expansion Header LandingsThe expansion header landings provide access to user GPIOs, primary inputs, clocks, and Bank 0/1 VCCO pins of the ispMACH 4256ZE. The remaining pins serve as power supplies for external connections. Each landing is con-figured as one 2x20 100 mil.

Table 2. Expansion Connector Reference

Item DescriptionReference Designators J3, J4, J5, J6Part Number header_2x20


Table 3. Expansion Header Pin Information (J3)

Pin Number Function LC4256ZE Pin1 IO_C12 42 GND n/a3 IO_C10 54 GND n/a5 IO_C8 66 GND n/a7 IO_C6 78 GND n/a9 IO_C4 810 GND n/a11 IO_C2 912 GND n/a13 IO_D14 1114 GND n/a15 IO_D12 1216 GND n/a17 IO_D10 1318 GND n/a19 IO_D8 1420 GND n/a21 IO_D6 1522 GND n/a23 IO_D4 1624 GND n/a25 IO_IA1 17IN26 GND n/a27 IO_IA2 20IN28 GND n/a29 IO_E2 2130 GND n/a31 IO_E4 2232 GND n/a33 IO_E6 2334 GND n/a35 IO_E8 2436 GND n/a37 IO_E10 2538 GND n/a39 IO_E12 2640 GND n/a



Pin Number Function LC4256ZE Pin1 IO_F2 282 IO_A2 1303 IO_F4 294 IO_A4 1315 IO_F6 306 IO_A6 1327 IO_F8 318 IO_A8 1339 IO_F10 3210 IO_A10 13411 IO_F12 3312 IO_A12 13513 IO_G12 3914 IO_B2 13815 IO_G10 4016 IO_B4 13917 IO_G8 4118 IO_B6 14019 IO_G6 4220 IO_B8 14121 IO_G4 4322 IO_B10 14223 IO_G2 4424 IO_B12 14325 IO_IA3 38IN26 IO_IA5 144IN27 IO_IA4 45IN28 GND n/a29 IO_H12 4830 NC n/a31 IO_H10 4932 GND n/a33 IO_H8 5034 CLK1 54CLK35 IO_H6 5136 GND n/a37 IO_H4 5238 CLK0 128CLK39 IO_H2 5340 GND n/a

10

ispMACH 4256ZE Breakout Board Evaluation Kit Users Guide


Pin Number Function LC4256ZE Pin1 IO_P2 1252 IO_M12 983 IO_P4 1244 IO_M10 975 IO_P6 1236 IO_M8 967 IO_P8 1228 IO_M6 959 IO_P10 12110 IO_M4 9411 IO_P12 12012 IO_M2 9313 IO_IB10 117IN14 IO_IB8 92IN15 IO_IB9 110IN16 IO_IB7 89IN17 IO_O2 11618 IO_L4 8819 IO_O4 11520 IO_L6 8721 IO_O6 11422 IO_L8 8623 IO_O8 11324 IO_L10 8525 IO_O10 11226 IO_L12 8427 IO_O12 11128 IO_L14 8329 IO_N12 10530 IO_K2 8131 IO_N10 10432 IO_K4 8033 IO_N8 10334 IO_K6 7935 IO_N6 10236 IO_K8 7837 IO_N4 10138 IO_K10 7739 IO_N2 10040 IO_K12 76

11



Pin Number Function LC4256ZE Pin1 VCC_3.3V VCCO_332 GND GND3 VCC_3.3V VCCO_334 GND GND5 VCC_3.3V VCCO_336 GND GND7 NC NC8 GND GND9 NC NC10 V_ext_1_8v VCC_EXT11 GND GND12 GND GND13 IO_J2 6614 V_ext_B0 VCCO_EXT_015 IO_J4 6716 V_ext_B1 VCCO_EXT_117 IO_J6 6818 GND GND19 IO_J8 6920 NC NC21 IO_J10 7022 NC NC23 IO_J12 7124 NC NC25 IO_IB6 72IN26 NC NC27 GND GND28 NC NC29 IO_I2 5830 NC NC31 IO_I4 5932 GND GND33 IO_I6 6034 CLK3 126CLK35 IO_I8 6136 GND GND37 IO_I10 6238 CLK2 56CLK39 IO_I12 6340 GND GND

12


Figure 4. J3/J4 Header Landing Callout

J3 J4

4 GND 5 GND 6 GND 7 GND 8 GND 9 GND 11 GND 12 GND 13 GND 14 GND 15 GND 16 GND

17 IN GND 20 IN GND

21 GND 22 GND 23 GND 24 GND 25 GND 26 GND

J3

28 130 29 131 30 132 31 133 32 134 33 135 39 138 40 139 41 140 42 141 43 142 44 143

38 IN 144 IN 45 IN GND

48 NC 49 GND 50 54 CLK 51 GND 52 128 CLK 53 GND

J4

1 2 1 2

39 40 39 40

Top Side

Figure 5. J5/J6 Header Landing CalloutJ5 J6

1 2 1 2

39 40 39 40

J5 J6

VCCO_33 GND VCCO_33 GND VCCO_33 GND

NC GND NC VCC_EXT

GND GND 66 VCCO_EXT_0 67 VCCO_EXT_1 68 GND 69 NC 70 NC 71 NC

72 IN NC GND NC 58 NC 59 GND 60 56 CLK 61 GND 62 126 CLK 63 GND

125 98 124 97 123 96 122 95 121 94 120 93

117 IN 92 IN 110 IN 89 IN

116 88 115 87 114 86 113 85 112 84 111 83 105 81 104 80 103 79 102 78 101 77 100 76

Top Side

13


Figure 6. J1 Header Landing and LED Array Callout

J11

J1

VCC3FT NCNC

35 (TCK) 2 (TDI)

107 (TDO) 74 (TMS)

GND

Top Side

58 59 60 61 62 63 70 71

LED

D1D5

8

D4D8

ispMACH4256ZE-TN144 CPLDThe board features the ispMACH 4000ZE CPLD which is ideal for low-power, high-volume portable applications. The on-board ispMACH 4256ZE is the highest capacity device of the family with 256 macrocells (equivalent to about 450 FPGA LUTs). The 144-pin TQFP package provides 96 user I/Os and 4 dedicated inputs in a 20mm x 20mm package. The ispMACH 4256ZE consumes standby current as low as 15A. A complete description of this device can be found in the ispMACH 4000ZE Family Data Sheet.

Table 7. ispMACH 4256ZE CPLD Interface Reference

Item DescriptionReference Designator U4Part Number LC4256ZE-5TN144CManufacturer Lattice SemiconductorWeb Site www.latticesemi.com

JTAG Interface Circuits (Reference Known Issues)For power and programming, a FTDI chip USB UART/FIFO IC converter provides a communication interface between a PC host and the JTAG programming chain of the Breakout Board. The USB 5V supply is also used as a source for the 3.3V and 1.8V supply rails. A USB mini-B socket is provided for the USB connector cable.

Table 8. JTAG Interface Reference

Item DescriptionReference Designator U2Part Number FT2232HLManufacturer Future Technology Devices International (FTDI)Web Site www.ftdichip.com

14


Table 9. JTAG Programming Pin Information

Description ispMACH 4256ZE PinTest Data Output 107:TDOTest Data Input 2:TDITest Mode Select 74:TMSTest Clock 35:TCK

LEDsA green LED (D9) is used to indicate USB 5V power. Eight red LEDs are driven by I/O pins of the ispMACH 4256ZE CPLD.

Table 10. Power and User LEDs Reference

Item DescriptionReference Designators D1, D2, D3, D4, D5, D6, D7, D8, D9

Part Number LTST-C190KRKT (D1-D8)LTST-C190KGKT (D9)Manufacturer Lite-On It CorporationWeb Site www.liteonit.com

Power Supply3.3V and 1.8V supply rails are converted from the USB 5V interface when the board is connected to a host PC.

Test PointsIn order to check the various voltage levels used, test points are provided:

TP1, VCC3D (VCCO Bank 0) TP2, VCC3D (VCCO Bank 1) TP3, VCC1_8 (VCC Core)USB Programming and Debug Interface The USB mini-B socket of the Breakout Board serves as the programming and debug interface.

JTAG Programming: For JTAG programming, a preprogrammed USB PHY peripheral controller is provided on the Breakout Board to serve as the programming interface to the ispMACH 4256ZE CPLD.

Programming requires the ispVM System software.

Table 11. USB Interface Reference

Item DescriptionReference Designator U2Part Number FT2232HLManufacturer Future Technology Devices International (FTDI)Web Site www.ftdichip.com

15


Board ModificationsThis section describes modifications to the board to change or add functionality.

Bypassing the USB Programming InterfaceThe USB programming interface circuit (section 6.2.8 USB Programming and Debug Interface) may be optionally bypassed by removing the 0 ohm resistors: R3, R4, R7, and R9 (See Schematic Sheet 2 of 4, Appendix A. Sche-matics). Header landing J1 provides JTAG signal access for jumper wires or a 1x8 pin header.Applying External PowerThe Breakout Board is powered by the circuit of Schematic Sheet 2 of 4 based on the 5V USB power source. You may disconnect this power source by removing the 0 ohm resistors: R47 (VCCO 3.3V, Bank 0), R48 (VCCO 3.3V, Bank 1), and R53 (VCC 1.8V, Core). Power connections are available from the expansion header landing, J6, Schematic Sheet 3 of 4.

Measuring Bank and Core VoltagesTest points (TP1, TP2, and TP3) provide access to bank VCCO and VCC core power supplies of the ispMACH 4256ZE CPLD. 0 ohm resistors: R47 (VCCO 3.3V, Bank 0), R48 (VCCO 3.3V, Bank 1), and R53 (VCC 1.8V, Core) can be removed to add a current meter inline or add a resistor shunt to measure voltage across.

Mechanical SpecificationsDimensions: 3 in. [L] x 3 in. [W] x 1/2 in. [H]Environmental RequirementsThe evaluation board must be stored between -40 C and 100 C. The recommended operating temperature is between 0 C and 90 C.

The board can be damaged without proper anti-static handling.

GlossaryCPLD: Complex Programmable Logic Device

LED: Light Emitting Diode

LUT: Look-Up Table

PCB: Printed Circuit Board

RoHS: Restriction of Hazardous Substances Directive

TQFP: Thin Quad Flat Pack

USB: Universal Serial Bus

WDT: Watchdog Timer

16


TroubleshootingUse the tips in this section to diagnose problems with the ispMACH 4256ZE Breakout Board.

LEDs Do Not Flash

If power is applied but the board does not flash according to the preprogrammed counter demonstration then it is likely that the board has been reprogrammed with a new design. Follow the directions in the Demonstration Designsection of this document to restore the factory default.

USB Cable Not Detected

If ispVM System does not recognize the USB cable even after installing the Lattice USB Port Drivers and rebooting, the incorrect USB driver may have been installed. This usually occurs if you attach the board to your PC prior to installing the USB driver or ispVM System software.

To access the Troubleshooting the USB Driver Installation Guide:

1. Start ispVM System and choose Options > Cable and I/O Port Setup.The Cable and I/O Port Setup Dialog appears.

2. Click the Troubleshooting the USB Driver Installation Guide link.The Troubleshooting the USB Driver Installation Guide document appears in your systems PDF file reader.

3. Follow the directions of the guide to install the Lattice USB driver.

Determine the Source of a Pre-Programmed Device

You may receive your Breakout Board after it has been reprogrammed by someone else. To restore the board to the factory default, see the Download Demo Designs section for details on downloading and reprogramming the device.

You can also determine which demo design is currently programmed onto the Breakout Board by comparing the JEDEC checksums against of the programming file with what is read from the programmed part.

To compare JEDEC file checksum:

1. Connect the Breakout Board to a host PC using the USB port.

2. Start ispVM and choose ispTools > Scan.The device appears in the Device List.

3. Double-click the device row.The Device Information dialog appears.

4. Click the Browse button.The Save as Data File dialog appears.

5. Specify a new JEDEC Data File name and click the Save button.

6. From the Operation list choose Read and Save JEDEC and click OK.

7. Choose Project > Download.

ispVM reads the contents from the device and writes the results to the JEDEC file specified.

Open the JEDEC file into a text editor and page to the bottom of the file.

Note the hexidecimal checksum at the line above the User Electronic Data note line. Compare this value against the checksum of the original JEDEC demo programming files.

17


Ordering Information

Description Ordering Part NumberChina RoHS Environment-Friendly

Use Period (EFUP)

ispMACH 4256ZE Breakout Board Evaluation Kit LC4256ZE-B-EVN

Technical Support AssistanceHotline: 1-800-LATTICE (North America)

+1-503-268-8001 (Outside North America)e-mail: [email protected]: www.latticesemi.com

Revision HistoryDate Version Change Summary

March 2011 01.0 Initial release.March 2012 01.1 Added Appendix C. Known Issues.

2012 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.

18


Appendix A. SchematicsFigure 7. ispMACH 4256ZE Breakout Board, Cover

5 5

4 4

3 3

2 2

1 1

DD

CC

BB

AA

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, C

over

B

14

Thur

sday

, Dec

embe

r 23,

201

0

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, C

over

B

14

Thur

sday

, Dec

embe

r 23,

201

0

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, C

over

B

14

Thur

sday

, Dec

embe

r 23,

201

0

USB CON

USB to JTAG

isp

MACH

4000

LED ARRAY

CONN

ECTE

D HE

ADER

CONN

ECTE

D HE

ADER

PROTOTYPE AREA

Resi

stan

t To

lera

nce:

R12

1%

All

the

res

t up

to

5%

19


Figure 8. USBIF to JTAG5 5

4 4

3 3

2 2

1 1

DD

CC

BB

AA

Dm

Dp

FT_E

ECS

FT_E

ECLK

FT_E

EDAT

A

FT_E

EDAT

A

TMS

TDI

TDO

TCK

TCK

TDI

TDO

TMS

FT_E

ECS

FT_E

ECLK

VCC

3FT

VBU

S_5V

VCC

_3.3

V

VBU

S_5V

VCC

3D

VCC

3FT

VCC

3FT

VCC

3FT

VCC

1_8F

T

VCC

3FT

VCC

1_8F

T

VCC

3FT

VCC

3FT

VCC

3FT

VCC

1_8

TCK

(4)

TDI

(4)

TDO

(4)

TMS

(4)

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, U

SB

IF to

JTA

G

C

24

Thur

sday

, Dec

embe

r 23,

201

0

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, U

SB

IF to

JTA

G

C

24

Thur

sday

, Dec

embe

r 23,

201

0

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, U

SB

IF to

JTA

G

C

24

Thur

sday

, Dec

embe

r 23,

201

0

Defa

ult

21

R19

0R

190

VC

C1

D-

2D

+3

ID4

GN

D5

J2

SKT_

MIN

IUSB

_B_R

A

J2

SKT_

MIN

IUSB

_B_R

A

21

R14

5k1

R14

5k1

21

R17

0R

170

1 2

C40

22u

C40

22u

12

C19

18pF

C19

18pF

21

R11

5k1

R11

5k1

12

L3

600o

hm 5

00m

A

L3

600o

hm 5

00m

A

CS

1C

LK2

DI

3D

O4

VS

S5

OR

G6

NU

7V

CC

8

93LC

56-S

O8

U3

93LC

56-S

O8

U3

1 2

C8

0.1u

Fcc

0402

C8

0.1u

Fcc

0402

21

R21

10k

R21

10k

11

22

33

44

55

66

77

88

J1

head

er_1

x8D

NI

J1

head

er_1

x8D

NI

21

R2

0R

20

21

R7

0R

70

21

R15

5k1

R15

5k1

1 2

C13

0.1u

FC

130.

1uF

21R

11k

R1

1k

VR

EG

IN50

VR

EG

OU

T49

DM

7D

P8

RE

F6

RE

SE

T#14

EE

CS

63E

EC

LK62

EE

DA

TA61

OS

CI

2

OS

CO

3

TES

T13

AD

BU

S0

16A

DB

US

117

AD

BU

S2

18A

DB

US

319

VPHY

4

VPLL

9

VCORE

12

VCORE

37

VCORE

64

VCCIO

20

VCCIO

31

VCCIO

42

VCCIO

56

AGND

10

GND

1

GND

5

GND

11

GND

15

GND

25

GND

35

GND

47

GND

51PW

RE

N#

60

SU

SP

EN

D#

36

AD

BU

S4

21A

DB

US

522

AD

BU

S6

23A

DB

US

724

AC

BU

S0

26A

CB

US

127

AC

BU

S2

28A

CB

US

329

AC

BU

S4

30A

CB

US

532

AC

BU

S6

33A

CB

US

734

BD

BU

S0

38B

DB

US

139

BD

BU

S2

40B

DB

US

341

BD

BU

S4

43B

DB

US

544

BD

BU

S6

45B

DB

US

746

BC

BU

S0

48B

CB

US

152

BC

BU

S2

53B

CB

US

354

BC

BU

S4

55B

CB

US

557

BC

BU

S6

58B

CB

US

759

FTDI

Hig

h-Sp

eed

USB

F

T223

2H

FT22

32H

LU

2

FTDI

Hig

h-Sp

eed

USB

Refe

renc

e Kn

own

Issu

es

F

T223

2H

FT22

32H

LU

2

1 2

C4

0.1u

FC

40.

1uF

1 2

C9

0.1u

Fcc

0402

C9

0.1u

Fcc

0402

1 2

C22

0.1u

FC

220.

1uF

1 2

C7

0.1u

Fcc

0402

C7

0.1u

Fcc

0402

11

33

G1

2G

24

X1 12M

HZ

X1 12M

HZ

1 2

C17

0.1u

FC

170.

1uF

1 2

C2

0.1u

FC

20.

1uF

21R

1212

k1%

R12

12k

1%

1 2L4 600o

hm 5

00m

A

L4 600o

hm 5

00m

A

GN

D

1

IN3

OU

T2

TAB

4

U5

NC

P111

7ST1

8

U5

NC

P111

7ST1

8

21

R18

0R

180

1 2

C42

0.1u

FC

420.

1uF

12

C18 18pF

C18 18pF

12

C20

0.1u

FC

200.

1uF

21

R22

2k2

R22

2k2

21

R16

5k1

R16

5k1

1 2

D9

Gre

enD

9G

reen

1 2

C3

4u7

C3

4u7

1 2

C16

10u

C16

10u

1 2

C12

4u7

C12

4u7

12

L2

600o

hm 5

00m

A

L2

600o

hm 5

00m

A

21

R4

0R

40

1 2

C6

0.1u

Fcc

0402

C6

0.1u

Fcc

0402

1 2

C14

0.1u

FC

140.

1uF

1 2

C15

0.1u

FC

150.

1uF

1 2

C21

0.1u

FC

210.

1uF

1 2

C10

10u

C10

10u

1 2

C11

22u

C11

22u

12

L1

600o

hm 5

00m

A

L1

600o

hm 5

00m

A

21

R3

0R

30

21

R9

0R

90

1 2

C41

4u7

C41

4u7

21

R20

5k1

R20

5k1

GN

D

1

IN3

OU

T2

TAB

4

U1

NC

P111

7ST3

3

U1

NC

P111

7ST3

3

1 2

C5

0.1u

Fcc

0402

C5

0.1u

Fcc

0402

20


Figure 9. Connectors and LEDs5 5

4 4

3 3

2 2

1 1

DD

CC

BB

AA

VCC

_3.3

V

VCC

3D

CLK

0(4

)

CLK

1(4

)

CLK

2(4

)

CLK

3(4

)

IO_C

10(4

)

IO_C

6(4

)IO

_C8

(4)

IO_C

2(4

)IO

_C4

(4)

IO_D

12(4

)IO

_D14

(4)

IO_D

10(4

)

IO_D

6(4

)IO

_D8

(4)

IO_I

A1(4

)IO

_D4

(4)

IO_I

A2(4

)

IO_E

4(4

)IO

_E2

(4)

IO_E

8(4

)IO

_E6

(4)

IO_E

12(4

)IO

_E10

(4)

IO_F

4(4

)IO

_F2

(4)

IO_F

8(4

)IO

_F6

(4)

IO_F

12(4

)IO

_F10

(4)

IO_G

12(4

)

IO_I

A3(4

)

IO_G

8(4

)IO

_G10

(4)

IO_G

4(4

)IO

_G6

(4)

IO_I

A4(4

)

IO_G

2(4

)

IO_H

10(4

)IO

_H12

(4)

IO_H

6(4

)IO

_H8

(4)

IO_H

4(4

)IO

_H2

(4)

IO_A

4(4

)IO

_A2

(4)

IO_A

8(4

)IO

_A6

(4)

IO_A

10(4

)IO

_A12

(4)

IO_B

4(4

)IO

_B2

(4)

IO_B

8(4

)IO

_B6

(4)

IO_B

10(4

)IO

_B12

(4)

IO_I

A5(4

)

IO_C

12(4

)

IO_I

2(4

)IO

_I4

(4)

IO_I

6(4

)IO

_I8

(4) I

O_I

10(4

)IO

_I12

(4)

IO_J

2(4

)IO

_J4

(4)

IO_J

6(4

)IO

_J8

(4) I

O_J

10(4

)IO

_J12

(4)

IO_I

B6(4

)

IO_K

12(4

)IO

_K10

(4)

IO_K

8(4

)IO

_K6

(4)

IO_K

4(4

)IO

_K2

(4)

IO_L

14(4

)IO

_L12

(4)

IO_L

10(4

)IO

_L8

(4)

IO_L

6(4

)IO

_L4

(4)

IO_I

B7(4

)IO

_IB8

(4)

IO_M

2(4

)IO

_M4

(4)

IO_M

6(4

)IO

_M8

(4)

IO_M

10(4

)IO

_M12

(4)

IO_N

2(4

)IO

_N4

(4)

IO_N

6(4

)IO

_N8

(4)I

O_N

10(4

)IO

_N12

(4)

IO_I

B9(4

)

IO_O

12(4

)IO

_O10

(4)

IO_O

8(4

)IO

_O6

(4)

IO_O

4(4

)IO

_O2

(4)IO

_IB1

0(4

)IO

_P12

(4)

IO_P

10(4

)IO

_P8

(4)

IO_P

6(4

)IO

_P4

(4)

IO_P

2(4

)

IO_I

2(4

)IO

_I4

(4)

IO_I

6(4

)IO

_I8

(4) I

O_I

10(4

)IO

_I12

(4)

IO_J

12(4

)IO

_J10

(4)

V_ex

t_B0

(4)

V_ex

t_B1

(4)

V_ex

t_1_

8v(4

)

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, C

ON

and

LE

D

C

34

Thur

sday

, Dec

embe

r 23,

201

0

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, C

ON

and

LE

D

C

34

Thur

sday

, Dec

embe

r 23,

201

0

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, C

ON

and

LE

D

C

34

Thur

sday

, Dec

embe

r 23,

201

0

4X15

PRO

TOTY

PE A

REA

LED

DISP

LAY

ARRA

Y

EXTE

RNAL

POW

ER P

INS

LEFT

SID

E HE

ADER

SPr

efix

IO_

may

be

ommi

ted

in s

ilk

scre

en

RIGH

T SI

DE H

EADE

RSPr

efix

IO_

may

be

ommi

ted

in s

ilk

scre

en

4 5 6 7 8 9 11 12 13 14 15 16 17IN

20IN

21 22 23 24 25 26

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

28 29 30 31 32 33 39 40 41 42 43 44 38IN

45IN

48 49 50 51 52 53

130

131

132

133

134

135

138

139

140

141

142

143

144I

NGN

DNC GN

D54

CLK

GND

128C

LKGN

D

125

124

123

122

121

120

117I

N11

0IN

116

115

114

113

112

111

105

104

103

102

101

100

98 97 96 95 94 93 92IN

89IN

88 87 86 85 84 83 81 80 79 78 77 76

VCCO

_33

VCCO

_33

VCCO

_33

NC NC GND

66 67 68 69 70 71 72IN

GND

58 59 60 61 62 63

GND

GND

GND

GND

VCC_

EXT

GND

VCCO

_EXT

_0VC

CO_E

XT_1

GND

NC NC NC NC NC NC GND

126C

LKGN

D56

CLK

GND

21

R50

10R

5010

21

R41

470

R41

470

1 2

D2

Red

D2

Red

21

R44

470

R44

470

Pro

to T

ype

Are

a1

J9

Prot

o Ty

pe A

rea

J9

Prot

o Ty

pe A

rea

1 2

C28

0.1u

FC

280.

1uF

11

22

33

44

55

66

77

88

99

1010

1111

1212

1313

1414

1515

1616

1717

1818

1919

2020

2121

2222

2323

2424

2525

2626

2727

2828

2929

3030

3131

3232

3333

3434

3535

3636

3737

3838

3939

4040

J3

head

er_2

x20

DN

I

J3

head

er_2

x20

DN

I

1 2

D1

Red

D1

Red

21

R46

470

R46

470

21

R45

470

R45

470

21

R49

10R

4910

21

R43

470

R43

470

21

R40

470

R40

470

1 2

C27

0.1u

FC

270.

1uF

21

R39

470

R39

470

1 2

D8

Red

D8

Red

11

22

33

44

55

66

77

88

99

1010

1111

1212

1313

1414

1515

1616

1717

1818

1919

2020

2121

2222

2323

2424

2525

2626

2727

2828

2929

3030

3131

3232

3333

3434

3535

3636

3737

3838

3939

4040

J6

head

er_2

x20

DN

I

J6

head

er_2

x20

DN

I

1 2

D6

Red

D6

Red

21

R52

10R

5210

1 2

C29

0.1u

FC

290.

1uF

1 2

D5

Red

D5

Red

1 2

D4

Red

D4

Red

1 2

D7

Red

D7

Red

21

R51

10R

5110

11

22

33

44

55

66

77

88

99

1010

1111

1212

1313

1414

1515

1616

1717

1818

1919

2020

2121

2222

2323

2424

2525

2626

2727

2828

2929

3030

3131

3232

3333

3434

3535

3636

3737

3838

3939

4040

J5

head

er_2

x20

DN

I

J5

head

er_2

x20

DN

I

21

R42

470

R42

470

1 2

D3

Red

D3

Red

11

22

33

44

55

66

77

88

99

1010

1111

1212

1313

1414

1515

1616

1717

1818

1919

2020

2121

2222

2323

2424

2525

2626

2727

2828

2929

3030

3131

3232

3333

3434

3535

3636

3737

3838

3939

4040

J4

head

er_2

x20

DN

I

J4

head

er_2

x20

DN

I

21


Figure 10. ispMACH 4000ZE5 5

4 4

3 3

2 2

1 1

DD

CC

BB

AA

VCC

3D

VCC

1_8

VCC

3D

TCK

(2)

TDI

(2) T

DO

(2)

TMS

(2)

CLK

0(3

)

CLK

1(3

)

CLK

2(3

)

CLK

3(3

)

V_ex

t_B1

(3)

V_ex

t_B0

(3)

IO_C

12(3

)IO

_C10

(3)

IO_C

6(3

)IO

_C8

(3)

IO_C

2(3

)IO

_C4

(3)

IO_D

12(3

)IO

_D14

(3)

IO_D

10(3

)

IO_D

6(3

)IO

_D8

(3)

IO_I

A1(3

)IO

_D4

(3)

IO_I

A2(3

)

IO_E

4(3

)IO

_E2

(3)

IO_E

8(3

)IO

_E6

(3)

IO_E

12(3

)IO

_E10

(3)

IO_F

4(3

)IO

_F2

(3)

IO_F

8(3

)IO

_F6

(3)

IO_F

12(3

)IO

_F10

(3)

IO_G

12(3

)IO

_IA3

(3)

IO_G

8(3

)IO

_G10

(3)

IO_G

4(3

)IO

_G6

(3)

IO_I

A4(3

)IO

_G2

(3)

IO_H

10(3

)IO

_H12

(3)

IO_H

6(3

)IO

_H8

(3)

IO_H

4(3

)IO

_H2

(3)

IO_A

4(3

)IO

_A2

(3)

IO_A

8(3

)IO

_A6

(3)

IO_A

10(3

)IO

_A12

(3)

IO_B

4(3

)IO

_B2

(3)

IO_B

8(3

)IO

_B6

(3)

IO_B

10(3

)IO

_B12

(3)

IO_I

A5(3

)

IO_I

2(3

)IO

_I4

(3)

IO_I

6(3

)IO

_I8

(3)

IO_I

10(3

)IO

_I12

(3)

IO_J

2(3

)IO

_J4

(3)

IO_J

6(3

)IO

_J8

(3)

IO_J

10(3

)IO

_J12

(3)

IO_I

B6(3

)

IO_K

12(3

)IO

_K10

(3)

IO_K

8(3

)IO

_K6

(3)

IO_K

4(3

)IO

_K2

(3)

IO_L

14(3

)IO

_L12

(3)

IO_L

10(3

)IO

_L8

(3)

IO_L

6(3

)IO

_L4

(3)

IO_I

B7(3

)

IO_I

B8(3

)IO

_M2

(3)

IO_M

4(3

)IO

_M6

(3)

IO_M

8(3

)IO

_M10

(3)

IO_M

12(3

)

IO_N

2(3

)IO

_N4

(3)

IO_N

6(3

)IO

_N8

(3)

IO_N

10(3

)IO

_N12

(3)

IO_I

B9(3

)IO

_O12

(3)

IO_O

10(3

)IO

_O8

(3)

IO_O

6(3

)IO

_O4

(3)

IO_O

2(3

)IO

_IB1

0(3

)

IO_P

12(3

)IO

_P10

(3)

IO_P

8(3

)IO

_P6

(3)

IO_P

4(3

)IO

_P2

(3)

V_ex

t_B0

(3)

V_ex

t_B1

(3)

V_ex

t_1_

8v(3

)

V_ex

t_1_

8v(3

)

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, L

attic

e is

pMA

CH

C

44

Thur

sday

, Dec

embe

r 23,

201

0

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, L

attic

e is

pMA

CH

C

44

Thur

sday

, Dec

embe

r 23,

201

0

Title

veR

rebmu

N tnemuco

DeziS

teehS:eta

Dof

AXE

LSYS

LC42

56ZE

-B-E

VN

A

ispM

AC

H40

00ZE

Bre

akou

t Boa

rd, L

attic

e is

pMA

CH

C

44

Thur

sday

, Dec

embe

r 23,

201

0

GN

D1

1TD

I2

TCK

35V

CC

36G

ND

237

VC

C57

GN

D3

73TM

S74

TDO

107

VC

C10

8G

ND

410

9V

CC

129

LC42

56ZE

-5TN

144C

U4-

3

LC42

56ZE

-5TN

144C

U4-

3

1 2

C32

0.1u

Fcc

0402

C32

0.1u

Fcc

0402

1 2

C24

0.1u

Fcc

0402

C24

0.1u

Fcc

0402

1 2

C37

0.1u

Fcc

0402

C37

0.1u

Fcc

0402

1 2

C39

0.1u

Fcc

0402

C39

0.1u

Fcc

0402

GN

D (B

AN

K 1

)55

CLK

2/I

56I2

58I4

59I6

60I8

61I1

062

I12

63V

CC

O (B

AN

K 1

)64

GN

D (B

AN

K 1

)65

J266

J467

J668

J869

J10

70J1

271

I-672

VC

CO

(BA

NK

1)

75K

1276

K10

77K

878

K6

79K

480

K2

81G

ND

(BA

NK

1)

82L1

483

L12

84L1

085

L886

L687

L488

I-789

NC

90V

CC

O (B

AN

K 1

)91

I-892

M2

93M

494

M6

95M

896

M10

97M

1298

GN

D (B

AN

K 1

)99

N2

100

N4

101

N6

102

N8

103

N10

104

N12

105

VC

CO

(BA

NK

1)

106

I-911

0O

1211

1O

1011

2O

811

3O

611

4O

411

5O

211

6I-1

011

7G

ND

(BA

NK

1)

118

VC

CO

(BA

NK

1)

119

P12

120

P10

121

P8

122

P6

123

P4

124

P2/

GO

E1

125

CLK

3/I

126

LC42

56ZE

-5TN

144C

U4-

2

LC42

56ZE

-5TN

144C

U4-

2

1 2

C43

0.1u

Fcc

0402

C43

0.1u

Fcc

0402

21

R53

0R53

0

21

R47

0R47

0

1 2

C30

0.1u

Fcc

0402

C30

0.1u

Fcc

0402

1 2

C36

0.1u

Fcc

0402

C36

0.1u

Fcc

0402

1

TP1

TP1

1 2

C31

0.1u

Fcc

0402

C31

0.1u

Fcc

0402

1

TP3

TP3

1 2

C26

0.1u

Fcc

0402

C26

0.1u

Fcc

0402

1 2

C33

0.1u

Fcc

0402

C33

0.1u

Fcc

0402

VC

CO

(BA

NK

0)

3C

124

C10

5C

86

C6

7C

48

C2

9G

ND

(BA

NK

0)

10D

1411

D12

12D

1013

D8

14D

615

D4

16I-1

17N

C18

VC

CO

(BA

NK

0)

19I-2

20E

221

E4

22E

623

E8

24E

1025

E12

26G

ND

(BA

NK

0)

27F2

28F4

29F6

30F8

31F1

032

F12

33V

CC

O (B

AN

K 0

)34

I-338

G12

39G

1040

G8

41G

642

G4

43G

244

I-445

GN

D (B

AN

K 0

)46

VC

CO

(BA

NK

0)

47H

1248

H10

49H

850

H6

51H

452

H2

53C

LK1/

I54

GN

D (B

AN

K 0

)12

7C

LK0/

I12

8A

2/G

OE

013

0A

413

1A

613

2A

813

3A

1013

4A

1213

5V

CC

O (B

AN

K 0

)13

6G

ND

(BA

NK

0)

137

B2

138

B4

139

B6

140

B8

141

B10

142

B12

143

I-514

4

LC42

56ZE

-5TN

144C

U4-

1

LC42

56ZE

-5TN

144C

U4-

1

1 2

C23

0.1u

Fcc

0402

C23

0.1u

Fcc

0402

21

R48

0R48

0

1 2

C34

0.1u

Fcc

0402

C34

0.1u

Fcc

0402

1 2

C35

0.1u

Fcc

0402

C35

0.1u

Fcc

0402

1 2

C25

0.1u

Fcc

0402

C25

0.1u

Fcc

0402

1 2

C38

0.1u

Fcc

0402

C38

0.1u

Fcc

0402

1

TP2

TP2

22


Appendix B. Bill of MaterialsTable 12. Bill of Materials, ispMACH 4256ZE Breakout Board

Item Quantity Reference Part Number

1 33C2, C4, C5, C6, C7, C8, C9, C13, C14, C15, C17, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C37, C38, C39, C42, C43

C0402C104K4RACTU

2 3 C3, C12, C41 ECJ-1VB0J475K3 2 C10, C16 ECJ-1VB0J106M4 2 C11, C40 LMK212BJ226MG-T5 2 C18, C19 C0402C180K3GACTU6 8 D1, D2, D3, D4, D5, D6, D7, D8 LTST-C190KRKT7 1 D9 LTST-C190KGKT8 1 J1 DNI9 1 J2 5075BMR-05-SM-CR10 4 J3, J4, J5, J6 DNI11 1 J9 DNI12 4 L1, L2, L3, L4 BLM18AG601SN1D13 1 R1 RC0402FR-071KL14 11 R2, R3, R4, R7, R9, R17, R18, R19, R47, R48, R53 RC0603JR-070RL15 5 R11, R14, R15, R16, R20 RC0402FR-075K1L16 1 R12 RC0402FR-0712KL17 1 R21 RC0402FR-0710KL18 1 R22 RC0402FR-072K2L19 8 R39, R40, R41, R42, R43, R44, R45, R46 RC0402FR-07470RL20 4 R49, R50, R51, R52 RC0402FR-0710RL21 3 TP1, TP2, TP3 DNI22 1 U1 NCP1117ST33T3G23 1 U2 FT2232HL24 1 U3 93LC56T-I/SN25 1 U4 LC4256ZE-5TN144C26 1 U5 NCP1117ST18T3G27 1 X1 7M-12.000MAAJ-T

23


Appendix C. Known Issues1. The ispMACH 4000ZE 1532 interface signals TCK, TMS, TDI and TDO are referenced to VCC=1.8V (logic

core). The ispMACH 4256ZE Breakout Board has an issue where the JTAG signals are connected to the FTDI which has a 3.3V interface. This circuit should not be replicated in a production board. As a work-around another FTDI device could be selected or a level translator could be used between the FTDI device and the ispMACH 4000ZE.

IntroductionFeaturesStorage and HandlingSoftware RequirementsDemonstration DesignRun the Demonstration DesignDownload Demo DesignsRecompile a Demonstration Project with ispLEVER ClassicProgramming with ispVM

ispMACH 4256ZE Breakout BoardOverviewSubsystemsClock SourcesExpansion Header LandingsispMACH4256ZE-TN144 CPLDJTAG Interface Circuits (Reference Known Issues)LEDsPower SupplyTest PointsUSB Programming and Debug Interface

Board ModificationsBypassing the USB Programming InterfaceApplying External PowerMeasuring Bank and Core Voltages

Mechanical SpecificationsEnvironmental Requirements

GlossaryTroubleshootingOrdering InformationTechnical Support AssistanceRevision HistoryAppendix A. SchematicsAppendix B. Bill of MaterialsAppendix C. Known Issues

ispmach4256zebreakoutboardevaluationkitusersguide

Documents

evaluation board

ze oscillator

ze device

onboard ispmach

featuresthe ispmach

embedded ispmach

ze cpld device

ze jtag port