02.09.2016

V I r. Jens Penner (Qualitätsmanagement / Senior quality management /

Responsable qualite)

isover SAINT-GOBAIN

EG-Konformitätserklärung / EC declaration of conformity / declaration «CE» de conformite

In Übereinstimmung mit der Richtlinie 2014/90/EU über Schiffsausrüstung / issued in accordance with the directive 2014/90/EU on marine equipment / conformärnent ä directive 2014/90/UE relative aux äquipements marins

1. Einmalige Kenn-Nummer des Produkts / unique identification of the product / identification unique du produit:

DoC_109.022

2. Name und Anschrift des Herstellers / name and address of the manufacturer / nom et adresse du fabricant:

SAINT-GOBAIN ISOVER G+H AG Bürgermeister-Grünzweig-Strasse 1

D-67059 Ludwigshafen

3. Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller / this declaration of conformity is issued under the sole responsibility of the manufacturer / la präsente däclaration de conformitä est ätablie sous la seule responsabilitä du fabricant :

SAINT-GOBAIN ISOVER G+H AG 4. Gegenstand der Erklärung / Object of the declaration / Objet de la däclaration :

B-15 Bulkhead penetration ULTIMATE

5. Der oben beschriebene Gegenstand der Erklärung erfüllt die einschlägigen Harmonisierungsrechtsvorschriften der Gemeinschaft / the object of the declaration described above is in conformity with the relevant community armonisation legislation / L'objet de la däclaration däcrit ci-dessus est conforme ä la lägislation communautaire d'harmonisation applicable:

Directives 2014/90/EU + 2015/559/EU

6. Angabe der einschlägigen harmonisierten Normen, die zugrunde gelegt wurden, oder Angabe der Spezifikationen, für die die Konformität erklärt wird / references to the relevant harmonised standards used or references to the specifications in relation to which conformity is declared / räfärences des normes harmonisäes pertinentes appliquäes ou des späcifications par report auxquelles la conformitä est däclaräe:

IMO Resolution MSC.307 (88)-(FTP-Code 2010) 8.3

IMO Resolution MSC.61(67)-(FTP-Code), Annex 1, Part 3

7. Die notifizierten Stellen haben folgende Bescheinigungen ausgestellt / the notified bodies issued the certificates / les organismes notifiäs ont ätabli les attestations:

BG Verkehr Dienststelle Schiffssicherheit; 0736

Module D:

SEE 15039

BG Verkehr Dienststelle Schiffssicherheit; 0736

Module B:

109.022 + 1.Supplement

8. Zusatzangaben / additional information / informations complämentaires:

Für die bestimmungsgemäße Installation ist der Verarbeiter verantwortlich. / The intended installation is in the responsibility of the installer. / L'installateur doit veiller ä une Installation conform&nent aux dispositions en vigueur.

EG-Baumusterprüfbescheinigung + Zeichnungen / EC type-examination certificate + drawings / attestation d'examen CE de type + dessins:

www.isover.de/le/marine/MED109.022-2014.pdf

Unterzeichnet für und im Namen von / signed for and on behalf of / signä par et au nom de: Saint-Gobain ISOVER G+H AG,

Ludwigshafen

ppa. Jürgen Trappmann (Leit Arbeitssicherheit, Umwelt, Sicherheit / Director en ironment, health, safety /

Directeur environnement, sant& securite)

This certificate may only be used in connection with module(s) D, E or F of this directive.

1ransAce Expiry date:

16.01.2019

Installed equipment stays approved beyond the validity date until it is revoked! 20 ture (Bork)

Note 2: Should the specified regulations or standards be amended during the validity of this certificate, the product(s) is/are to be re-approved prior to it/they being placed on board vessels to which the amended regulations or standards apply.

Note 3: The Mark of Conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production-control phase module (D, E or F) of ANNEX B of the Directive is fully complied with and controlled by a written inspection agreement with a notified body.

Note 4: "Wheelmark" Format YY Last two digits of year mark affixed.

. , , ,- ..... „i.J. ,01,bk

», go up:, i-

ree XXXX Notified Body number undertaking surveillance module i ›000dyy

European notified body Identification number 0736

ed DG UV Test Prüf- und Zertifizierungsstelle BG Verkehr Dienststelle Schiffssicherheit

EC-Type Examination (Module B) Certificate

Certificate No. 109.022 U.S. Coast Guard Approval No. 164.138/EC0736/109.022

Name and address of the manufacturer:

Date of issue:

Annex A.1 Item No & Item designation:

SAINT-GOBAIN ISOVER G+H AG Bürgermeister-Grünzweig-Strasse 1 67059 Ludwigshafen (Germany)

17.01.2014

A.1/3.27 b - Penetrations through "B" Class divisions (pipe, duct, trunk, etc. penetrations)

Product designation:

Penetrations through vertical B-15 Class divisions

Product Type:

B-15 Bulkhead penetration ULTIMATE

Intended purpose:

Penetrations complying with SOLAS 74/88 Reg. 11-2/9, as amended

Testing based on

IMO Resolution MSC.307 (88)-(FTP-Code 2010)* (Specific standard): ") = not applicable accordance chapter 8.3 IMO Resolution MSC.307 (88)

IMO Resolution MSC.61(67)-(FTP-Code), Annex 1, Part 3

Remarks: see page 2 + 3

The type tested was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 96/98/EC as amended by Directive 2012/32/EU subject to any conditions in the schedule (part of this certificate).

Note 1: This certificate will not be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with the notified body named on this certificate.

Postai address: BG Verkehr Dienststelle Schiffssicherheit Ottenser Hauptstraße 54 22765 Hamburg

Office: Brandstwietel 20457 Hamburg

Tel: 0 40/3 61 37-0 Fax: 0 40/3 61 37 2 04 In any case, the German original shall prevail.

Page 2 of 3 of the EC-Type Examination Certificate for certificate-number: 109.022, date of issue: 17.01.2014

Technical data / approved drawings and additional conditions and remarks:

1. This EC-Type Examination Certificate is based on the following documents: - Test Report No. GV06/4884.1 issued by "Brandversuchshaus Hamburg", 22767 Hamburg (DE), on 24.08.2007. - Test Report No. GV06/5051.1 issued by "Brandversuchshaus Hamburg", 22767 Hamburg (DE), on 28.08.2007. - Test Report No. GV06/5053.1 issued by "Brandversuchshaus Hamburg", 22767 Hamburg (DE), on 05.10.2007. - Letter of confirmation of the "Brandversuchshaus Hamburg" (Dipl.- Ing. A. Pavlik) dated 10.11.2008.

2. This EC-Type Examination Certificate provides that the assembly of the vertical division coincides in all items with the constructions as described in the number 4.2 and the enclosures to the Test Reports GV06/4884.1, GV06/5051.1 and GV06/5053.1.

3 All measurements of the penetrations in the vertical B-15 division must be in accordance with the following drawings:

3.1 Test Report No. GV06/4884.1 - Steel Pipe DN 32 - Steel Pipe DN 65 - Stainless Steel Pipe DN 15 - Stainless Steel Pipe DN 150 - Blücher Pipe DN 50 - Blücher Pipe DN 100 - Copper Pipe DN 10 - Copper Pipe DN 100 - CuNil0Fe Pipe DN 12 - CuNil0Fe Pipe DN 150

3.2 Test Report No.. GV06/5051.1 - AC duct 450 x 160 - AC duct 350 x 170 - AC duct 300 x 140 - AC pipe Spiro DN 100 - AC pipe Spiro DN 200 - AC pipe Spiro DN 100 pre-insulated - AC pipe Spiro DN 200 pre-insulated

3.3 Test Report No. GV06/5053.1 - LORO-X-Pipe DN 50 - LORO-X-Pipe DN 100 - Seamless Steel Pipe DN 4 - Seamless Steel Pipe DN 32

= Drawing No. 073 S - -- 2007

Drawing No. 073 S - -- 2008

Drawing No. 073 S - -- 2010

= Drawing No. 073 S - -- 2001

= Drawing No. 073 S - -- 2004

= Drawing No. 073 S - 2005

= Drawing No. 073 S - -- 2003

= Drawing No. 073 S - -- 2002

= Drawing No. 073 S - -- 2006

= Drawing No. 073 S - -- 2009

Drawing No. 073 S - -- 1001

Drawing No. 073 S - -- 1002

Drawing No. 073 S - -- 1003

Drawing No. 073 S - 1005

Drawing No. 073 S - -- 1004

= Drawing No. 073 S - -- 1006

Drawing No. 073 S - -- 1007

= Drawing No. 073 S - -- 3004

= Drawing No. 073 S - 3005

= Drawing No. 073 S - -- 3007

Drawing No. 073 S - -- 3006

They can only be changed in compliance with the Prüf- und Zertifizierungsstelle of the Ship Safety Division.

4. As vertical division "B-15 Bulkhead ULTIMATE", EC-Type Examination Certificate No. 102.319, issued by Ship Safety Division, has to be used. Additional B-15 dass divisions, which will be used, must be approved by a European notified body.

Page 3 of 3 of the EC-Type Examination Certificate for certificate-number: 109.022, date of issue: 17.01.2014

5.

As insulation material has to be used: - ISOVER marine slab ULTIMATE U SeaProtect Slab 66 A-A

EC-Type Examination Certificate No. 114.528, issued by Ship Safety Division

6. Non combustible insulation material as per Test Reports GV06/4884.1, GV06/5051.1 and GV06/5053.1 may be replaced by a different one, provided that its composition and physical properties (e.g. heat conductivity, density and thickness of the material) correspond with the tested material and an approval as per directive 96/98, as amended has been obtained. This has to be proved to the Ship Safety Division beforehand in written form.

7. Surface materials and adhesives which will be used must be not readily ignitable and approved by a European notified body.

8. The equipment shall be marked in accordance with Article 11 of the Council Directive 96/98/EC of 20 December 1996 on Marine Equipment as amended.

9. This EC-Type Examination Certificate replaces the old EC-Type Examination Certificate, issued on 08.01.2009 with a running time up to 31.01.2014.

10. This EC-Type Examination Certificate may only be published or transmitted unabridged.

Note: This product has been assigned a U.S. Coast Guard approval no. (USCG number) to note type approval to Module B only as it pertains to obtaining U.S. Coast Guard approval as allowed by the "Agreement between the European Community and the United States of America on Mutual Recognition of Certificates of Conformity for Marine Equipment" signed February 27th, 2004.

The U.S. Coast Guard approval number is:

164.138/EC0736/109.022

The equipment manufacturer has to be mark the equipment with this U.S. Coast Guard approval number.

gnature (Bork)

European notified body Identification number 0736

ei DG UV Test Prüf- und Zertifizierungsstelle BG Verkehr Dienststelle Schiffssicherheit

1. Supplement to EC-Type Examination Certificate

Certificate-No. 109.022

dated 17.01.2014

Product designation: Penetrations through vertical B-15 Class divisions

Item designation: A.1/3.27 b - Penetrations through "8" Class divisions (pipe, duct, trunk, etc. penetrations)

Type: B-15 Bulkhead penetration ULTIMATE

Manufacturer:

SAINT-GOBAIN ISOVER G+H AG Bürgermeister-Grünzweig-Strasse 1 67059 Ludwigshafen (Germany)

Reference: Letter of the company SAINT-GOBAIN ISOVER G+H AG (Dr. Perner) dated 06.03.2014

Alteration/Addition: The following non-combustible material may also be used for the insulation of the above-mentioned B-15 bulkhead penetration:

- ISOVER marine siab ULTIMATE U MPAA 66 EC-Type Examination Certificate No. 114.528, issued by Ship Safety Division

The approved type with the above certificate number may be further manufactured and sold with the alterations/additions stated above.

The other regulations of the EC-Type Examination Certificate are not affected by this supplement.

This Supplement to EC-Type Examination Certificate will be expired on: 16.01.2019

Hamburg, 10.03.2014

Postai address: Office: Tel: 0 40/3 61 37-0 BG Verkehr Brandstwietel Fax: 0 40/3 61 37 2 04 Dienststelle Schiffssicherheit 20457 Hamburg In any case, the German original shall prevail. Ottenser Hauptstraße 54 22765 Hamburg