isoupdate july 2015 - unms.sk · iso 3317:2015 assembly tools for screws and nuts — square drive...

Standards published

New International Standards published between 01 June and 30 June 2015

* Available in English only

** French version of standard previously published in English only

Price group

TC 6 Paper, board and pulps

ISO 1762:2015

Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C A

TC 10 Technical product documentation

ISO 128-43:2015

* Technical product documentation (TPD) — General principles of presentation — Part 43: Projection methods in building drawings

A

ISO 14084-1:2015

* Process diagrams for power plants — Part 1: Specification for diagrams E

ISO 15519-2:2015

* Specifications for diagrams for process industry — Part 2: Measurement and control F

TC 17 Steel

ISO 4969:2015 * Steel — Etching method for macroscopic examination B

ISO 16573:2015

Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels

B

ISO 377:2013

Steel and steel products — Location and preparation of samples and test pieces for mechanical test-ing

D

TC 20 Aircraft and space vehicles

ISO 8177:2015 * Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions A

ISO 10537:2010/Amd 1:2015

* Space data and information transfer systems — Encapsulation service — Amendment 1 XZ

ISO 12175:1994/A

* Space data and information transfer systems — Standard formatted data units — Structure and con-struction rules — Amendment 1

G

md 1:2015

ISO 13526:2010/Amd 1:2015

* Space data and information transfer systems — Tracking data message — Amendment 1 XZ

ISO 22666:2007/Amd 1:2015

* Space data and information transfer systems — AOS (advanced orbiting systems) space data link protocol — Amendment 1

XZ

TC 22 Road vehicles

ISO 11451-1:2015

* Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electro-magnetic energy — Part 1: General principles and terminology

D

ISO 11451-2:2015

* Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electro-magnetic energy — Part 2: Off-vehicle radiation sources

D

ISO 11451-3:2015

* Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electro-magnetic energy — Part 3: On-board transmitter simulation

G

ISO 11452-1:2015

* Road vehicles — Component test methods for electrical disturbances from narrowband radiated elec-tromagnetic energy — Part 1: General principles and terminology

E

ISO 11452-8:2015

* Road vehicles — Component test methods for electrical disturbances from narrowband radiated elec-tromagnetic energy — Part 8: Immunity to magnetic fields

C

ISO 3006:2015 * Road vehicles — Passenger car wheels for road use — Test methods B

ISO/TR 12349-2:2015

* Road vehicles — Dummies for restraint system testing — Part 2: Child dummies A

TC 27 Solid mineral fuels

ISO 502:2015 * Coal — Determination of caking power — Gray-King coke test C

ISO 12900:2015

* Hard coal — Determination of abrasiveness B

TC 29 Small tools

ISO 3317:2015

Assembly tools for screws and nuts — Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches

A

TC 33 Refractories

ISO 22016:2015

Determination of sulfur in refractory products and raw materials by gravimetric, photometric and ti-trimetric methods

C

TC 34 Food products

ISO 27971:2015

Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology

G

ISO/TS 17728:2015

Microbiology of the food chain — Sampling techniques for microbiological analysis of food and feed samples

C

ISO 6495-1:2015

Animal feeding stuffs — Determination of water-soluble chlorides content — Part 1: Titrimetric method

B

ISO 12966-4:2015

Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 4: De-termination by capillary gas chromatography

D

TC 36 Cinematography

ISO 2939:2015 * Cinematography — Picture image area on 35 mm motion-picture release prints — Position and di-mensions and analogue and digital photographic sound to picture record displacement

A

ISO 2969:2015 * Cinematography — B-chain electro-acoustic reponse of motion-picture control rooms and indoor thea-tres — Specifications and measurements

C

TC 38 Textiles

ISO 2061:2015

Textiles — Determination of twist in yarns — Direct counting method C

TC 39 Machine tools

ISO 230-7:2015

Test code for machine tools — Part 7: Geometric accuracy of axes of rotation

G

ISO 10791-7:2014

Test conditions for machining centres — Part 7: Accuracy of finished test pieces

D

ISO 11090-1:2014

Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accu-racy — Part 1: Single-column machines (cross-slide table type and fixed-table type)

D

ISO 11090-2:2014

Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accu-racy — Part 2: Double-column machines (slide-head type)

D

ISO 13041-5:2015

Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of speeds and interpolations

E

TC 42 Photography

ISO 17850:2015

* Photography — Digital cameras — Geometric distortion (GD) measurements F

TC 43 Acoustics

ISO 10140-3:2010/Amd 1:2015

Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measure-ment of impact sound insulation — Amendment 1

XZ

TC 44 Welding and allied processes

ISO 3834-5:2015

Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4

B

TC 45 Rubber and rubber products

ISO 34-1:2015 * Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces

C

ISO 34-2:2015 * Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test

pieces B

ISO 6505:2015

Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals B

ISO 18517:2015

Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide

A

ISO 19242:2015

* Rubber — Determination of total sulfur content by ion chromatography C

ISO 23794:2015

Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance

C

ISO 2028:2015 * Synthetic rubber latex — Preparation of dry polymer A

ISO 15825:2015

* Rubber compounding ingredients — Carbon black — Determination of aggregate size distribution by disc centrifuge photosedimentometry

B

ISO 18852:2015

Rubber compounding ingredients — Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)

B

ISO 4633:2015 * Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials

B

TC 58 Gas cylinders

ISO 10286:2015

* Gas cylinders — Terminology A

TC 61 Plastics

ISO 13802:2015

Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing

E

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and nat-ural gas industries

ISO 16903:2015

Petroleum and natural gas industries — Characteristics of LNG, influencing the design, and material selection

C

ISO/TS 17969:2015

* Petroleum, petrochemical and natural gas industries — Guidelines on competency for personnel E

ISO 15589-1:2015

Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines

H

ISO 13628-15:2011

Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds

G

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

ISO 8536-8:2015

Infusion equipment for medical use — Part 8: Infusion sets for single use with pressure infusion appa-ratus

C

ISO 8536-9:2015

Infusion equipment for medical use — Part 9: Fluid lines for single use with pressure infusion equip-ment

B

ISO 8536-10:2015

Infusion equipment for medical use — Part 10: Accessories for fluid lines for single use with pressure infusion equipment

B

ISO 8536-11:2015

Infusion equipment for medical use — Part 11: Infusion filters for single use with pressure infusion equipment

B

TC 83 Sports and other recreational facilities and equipment

ISO/TR 20183:2015

* Sports and other recreational facilities and equipment — Injury and safety definitions and thresholds — Guidelines for their inclusion in standards

A

ISO 10958-2:2015

* Snowboards — Binding mounting area — Part 2: Requirements and test methods for snowboards with inserts

A

ISO 11087:2015

Alpine ski-bindings — Retention devices — Requirements and test methods

B

TC 94 Personal safety -- Protective clothing and equipment

ISO 12312-2:2015

Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun

B

ISO 11999-1:2015

* PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 1: Gen-eral

F

ISO/TS 11999-2:2015

* PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 2: Com-patibility

B

ISO 11999-3:2015

* PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 3: Cloth-ing

D

ISO 11999-4:2015

* PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 4: Gloves

C

TC 96 Cranes

ISO 9928-1:2015

Cranes — Crane operating manual — Part 1: General

A

ISO 11660-2:2015

* Cranes — Access, guards and restraints — Part 2: Mobile cranes A

TC 102 Iron ore and direct reduced iron

ISO 10203:2015

* Iron ores — Determination of calcium — Flame atomic absorption spectrometric method C

ISO 15633:2015

* Iron ores — Determination of nickel — Flame atomic absorption spectrometric method C

TC 106 Dentistry

ISO 6872:2015

Dentistry — Ceramic materials E

ISO 16954:2015

Dentistry — Test methods for dental unit waterline biofilm treatment

C

ISO 12836:2015

Dentistry — Digitizing devices for CAD/CAM systems for indirect dental restorations — Test methods for assessing accuracy

D

TC 107 Metallic and other inorganic coatings

ISO 12670:2011

Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions

A

ISO 12679:2011

Thermal spraying — Recommendations for thermal spraying

C

ISO 27307:2015

Thermal spraying — Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by trans-verse scratch testing

D

TC 112 Vacuum technology

ISO 27892:2010

Vacuum technology — Turbomolecular pumps — Measurement of rapid shutdown torque

C

TC 113 Hydrometry

ISO/TR 9212:2015

* Hydrometry — Methods of measurement of bedload discharge D

TC 115 Pumps

ISO/ASME 14414:2015

Pump system energy assessment

G

ISO 20361:2015

Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy

D

TC 117 Fans

ISO 5802:2001/Amd 1:2015

Industrial fans — Performance testing in situ — Amendment 1

XZ

TC 121 Anaesthetic and respiratory equipment

IEC 80601-2-71:2015

* Medical electrical equipment — Part 2-71: Particular requirements for the basic safety and essential performance of functional Near-Infrared Spectroscopy (NIRS) equipment

E

TC 130 Graphic technology

ISO 2834-2:2015

* Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks B

ISO 12646:2015

* Graphic technology — Displays for colour proofing — Characteristics B

ISO 17972- * Graphic technology — Colour data exchange format (CxF/X) — Part 4: Spot colour characterisation

4:2015 data (CxF/X-4) B

ISO 18619:2015

* Image technology colour management — Black point compensation C

TC 134 Fertilizers and soil conditioners

ISO 17318:2015

* Fertilizers and soil conditioners — Determination of arsenic, cadmium, chromium, lead and mercury contents

E

ISO 17322:2015

* Fertilizers and soil conditioners — Analytical methods for Sulfur Coated Urea (SCU) F

ISO 17323:2015

* Fertilizers and soil conditioners — Sulfur Coated Urea (SCU) — General requirements A

TC 135 Non-destructive testing

ISO 18563-1:2015

Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 1: Instruments

F

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO 6259-3:2015

Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes

B

TC 147 Water quality

ISO 13164-4:2015

Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting

B

ISO 13168:2015

Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting

C

ISO 16778:2015

Water quality — Calanoid copepod early-life stage test with Acartia tonsa

F

TC 150 Implants for surgery

ISO 12891-1:2015

* Retrieval and analysis of surgical implants — Part 1: Retrieval and handling D

TC 153 Valves

ISO 5208:2015 * Industrial valves — Pressure testing of metallic valves C

ISO 15848-1:2015

Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Part 1: Classification system and qualification procedures for type testing of valves

F

ISO 15848-2:2015

Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Part 2: Production acceptance test of valves

A

TC 155 Nickel and nickel alloys

ISO 7530-1:2015

* Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1: Determination of cobalt, chromium, copper, iron and manganese

D

TC 156 Corrosion of metals and alloys

ISO 17093:2015

Corrosion of metals and alloys — Guidelines for corrosion test by electrochemical noise measure-ments

C

ISO 18069:2015

Corrosion of metals and alloys — Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids

B

ISO 18086:2015

Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria

F

TC 164 Mechanical testing of metals

ISO 9513:2012

Metallic materials — Calibration of extensometer systems used in uniaxial testing F

TC 172 Optics and photonics

ISO 10109:2015

* Optics and photonics — Guidance for the selection of environmental tests C

ISO 8036:2015 * Microscopes — Immersion liquids for light microscopy A

ISO 17123-8:2015

* Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 8: GNSS field measurement systems in real-time kinematic (RTK)

D

ISO 11151-1:2015

Lasers and laser-related equipment — Standard optical components — Part 1: Components for the UV, visible and near-infrared spectral ranges

B

ISO 11151-2:2015

Lasers and laser-related equipment — Standard optical components — Part 2: Components for the infrared spectral range

B

ISO 13142:2015

* Electro-optical systems — Cavity ring-down technique for high-reflectance measurement C

ISO 17901-1:2015

* Optics and photonics — Holography — Part 1: Methods of measuring diffraction efficiency and asso-ciated optical characteristics of holograms

C

ISO 17901-2:2015

* Optics and photonics — Holography — Part 2: Methods for measurement of hologram recording characteristics

D

TC 173 Assistive products for persons with disability

ISO 7176-8:2014

Wheelchairs — Part 8: Requirements and test methods for static, impact and fatigue strengths

G

ISO/TS 16840-12:2015

Wheelchair seating — Part 12: Apparatus and method for cushion envelopment testing

C

TC 174 Jewellery

ISO 18323:2015

Jewellery — Consumer confidence in the diamond industry

B

TC 181 Safety of toys

ISO 8124-5:2015

* Safety of toys — Part 5: Determination of total concentration of certain elements in toys C

TC 183 Copper, lead, zinc and nickel ores and concentrates

ISO 10258:2015

* Copper sulfide concentrates — Determination of copper content — Titrimetric methods D

ISO 15247:2015

* Zinc sulfide concentrates — Determination of silver content — Acid dissolution and flame atomic ab-sorption spectrometric method

C

TC 184 Automation systems and integration

ISO 11354-2:2015

* Advanced automation technologies and their applications — Requirements for establishing manufac-turing enterprise process interoperability — Part 2: Maturity model for assessing enterprise interoper-ability

C

TC 201 Surface chemical analysis

ISO 18337:2015

* Surface chemical analysis — Surface characterization — Measurement of the lateral resolution of a confocal fluorescence microscope

B

TC 210 Quality management and corresponding general aspects for medical devices

IEC 62304:2006/Amd 1:2015

* Medical device software — Software life cycle processes — Amendment 1 F

TC 211 Geographic information/Geomatics

ISO 19147:2015

* Geographic information — Transfer Nodes G

ISO 19150-2:2015

* Geographic information — Ontology — Part 2: Rules for developing ontologies in the Web Ontology Language (OWL)

H

TC 213 Dimensional and geometrical product specifications and verification

ISO 16610-22:2015

Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters

C

ISO 16610-41:2015

Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters

C

ISO 16610-61:2015

Geometrical product specification (GPS) — Filtration — Part 61: Linear areal filters — Gaussian filters

C

ISO 25178-606:2015

Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteris-tics of non-contact (focus variation) instruments

E

TC 216 Footwear

ISO 10750:2015

Footwear — Test method for slide fasteners — Attachment strength of end stops

B

TC 226 Materials for the production of primary aluminium

ISO * Aluminium oxide primarily used for the production of aluminium — Method for the determination of

18843:2015 flow time A

TC 229 Nanotechnologies

ISO/TS 80004-2:2015

* Nanotechnologies — Vocabulary — Part 2: Nano-objects B

TC 251 Asset management

ISO 55001:2014

* Asset management — Management systems — Requirements C

TC 254 Safety of amusement rides and amusement devices

ISO 17842-1:2015

* Safety of amusement rides and amusement devices — Part 1: Design and manufacture H

ISO 17842-3:2015

* Safety of amusement rides and amusement devices — Part 3: Requirements for inspection during design, manufacture, operation and use

B

TC 256 Pigments, dyestuffs and extenders

ISO 18314-1:2015

* Analytical colorimetry — Part 1: Practical colour measurement A

ISO 18314-2:2015

* Analytical colorimetry — Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tint-ing strength, hiding power

C

ISO 18314-3:2015

* Analytical colorimetry — Part 3: Special indices A

TC 292 Security and resilience

ISO 22324:2015

* Societal security — Emergency management — Guidelines for colour-coded alerts B

IULTCS International Union of Leather Technologists and Chemists Societies

ISO 18218-1:2015

Leather — Determination of ethoxylated alkylphenols — Part 1: Direct method

B

ISO 18218-2:2015

Leather — Determination of ethoxylated alkylphenols — Part 2: Indirect method

C

CASCO Committee on conformity assessment

ISO/IEC 17021-1:2015

Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements

F

ISO/IEC 17050-1:2004

* Conformity assessment — Supplier's declaration of conformity — Part 1: General requirements A

JTC 1 Information technology

ISO/IEC 29341-12-1:2015

* Information technology — UPnP Device Architecture — Part 12-1: Remote User Interface Device Control Protocol - Remote User Interface Client Device

B

ISO/IEC 29341-12-2:2015

* Information technology — UPnP Device Architecture — Part 12-2: Remote User Interface Device Control Protocol — Remote User Interface Server Device

B

ISO/IEC 29341-3-10:2015

* Information technology — UPnP Device Architecture — Part 3-10: Audio Video Device Control Proto-col — Audio Video Transport Service

G

ISO/IEC 29341-7-11:2015

* Information technology — UPnP Device Architecture — Part 7-11: Lighting Device Control Protocol — Switch Power Service

B

ISO/IEC 29341-12-10:2015

* Information technology — UPnP Device Architecture — Part 12-10: Remote User Interface Device Control Protocol — Remote User Interface Client Service

D

ISO/IEC 29341-12-11:2015

* Information technology — UPnP Device Architecture — Part 12-11: Remote User Interface Device Control Protocol - Remote User Interface Server Service

C

ISO/IEC 29180:2012/Cor 1:2015

* Information technology — Telecommunications and information exchange between systems — Secu-rity framework for ubiquitous sensor networks — Technical Corrigendum 1

free

ISO/IEC 11693-3:2015

* Identification cards — Optical memory cards — Part 3: Authentication techniques B

ISO/IEC 11694-3:2015

* Identification cards — Optical memory cards — Linear recording method — Part 3: Optical properties and characteristics

A

ISO/IEC 15693-3:2009/Amd 3:2015

* Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol — Amendment 3: Extended VICC memory organisation

XZ

ISO/IEC TS 18822:2015

* Programming languages — C++ — File System Technical Specification G

ISO/IEC TS 19570:2015

* Programming Languages — Technical Specification for C++ Extensions for Parallelism D

ISO/IEC 30190:2013/Cor 1:2015

* Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Recordable disk — Technical Corrigendum 1

free

ISO/IEC 30192:2013/Cor 1:2015

* Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk — Technical Corrigendum 1

free

ISO/IEC 30193:2013/Cor 1:2015

* Information technology — Digitally recorded media for information interchange and storage — 120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk — Technical Corrigendum 1

free

ISO/IEC 14776-153:2015

* Information technology — Small Computer System Interface (SCSI) — Part 153: Serial Attached SCSI - 2.1 (SAS-2.1)

H

ISO/IEC 17760-101:2015

* Information technology — AT Attachment 8 — Part 101: ATA/ATAPI Command Set (ATA8-ACS) H

ISO/IEC 24760-2:2015

* Information technology — Security techniques — A framework for identity management — Part 2: Reference architecture and requirements

F

ISO/IEC 27041:2015

* Information technology — Security techniques — Guidance on assuring suitability and adequacy of incident investigative method

C

ISO/IEC 27042:2015

* Information technology — Security techniques — Guidelines for the analysis and interpretation of digital evidence

C

ISO/IEC 13818-1:2015

* Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems

H

ISO/IEC 14496-12:2012/Cor 4:2015

* Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Technical Corrigendum 4

free

ISO/IEC 15444-12:2012/Cor 4:2015

* Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Technical Corrigendum 4

free

ISO/IEC 18477-1:2015

* Information technology — Scalable compression and coding of continuous-tone still images — Part 1: Scalable compression and coding of continuous-tone still images

C

ISO/IEC 23002-5:2013/Amd 1:2015

* Information technology — MPEG video technologies — Part 5: Reconfigurable media coding con-formance and reference software — Amendment 1: Graphics tool library (GTL) reference software and conformance

XZ

ISO/IEC 23003-3:2012/Amd 1:2014/Cor 1:2015

* Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 1: Conformance — Technical Corrigendum 1

free

ISO/IEC 23009-1:2014/Amd 1:2015

* Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presenta-tion description and segment formats — Amendment 1: High Profile and Availability Time Synchroni-zation

XZ

ISO/IEC 29167-17:2015

* Information technology — Automatic identification and data capture techniques — Part 17: Crypto suite cryptoGPS security services for air interface communications

F

ISO/IEC TR 15944-6:2015

* Information technology — Business Operational View — Part 6: Technical introduction to e-Business modelling

F

ISO/IEC TR 19075-2:2015

* Information technology — Database languages — SQL Technical Reports — Part 2: SQL Support for Time-Related Information

F

ISO/IEC TR 19075-3:2015

* Information technology — Database languages — SQL Technical Reports — Part 3: SQL Embedded in Programs using the JavaTM programming language

D

ISO/IEC TR 19075-4:2015

* Information technology — Database languages — SQL Technical Reports — Part 4: SQL with Rou-tines and types using the JavaTM programming language

G

ISO/IEC 19763-1:2015

* Information technology — Metamodel framework for interoperability (MFI) — Part 1: Framework D

ISO/IEC 26300-1:2015

* Information technology — Open Document Format for Office Applications (OpenDocument) v1.2 — Part 1: OpenDocument Schema

H

ISO/IEC 26300-2:2015

* Information technology — Open Document Format for Office Applications (OpenDocument) v1.2 — Part 2: Recalculated Formula (OpenFormula) Format

H

ISO/IEC 26300-3:2015

* Information technology — Open Document Format for Office Applications (OpenDocument) v1.2 — Part 3: Packages

E

ISO/IEC 29500-3:2015

* Information technology — Document description and processing languages — Office Open XML File Formats — Part 3: Markup Compatibility and Extensibility

E

ISO/IEC 9995-11:2015

Information technology — Keyboard layouts for office systems — Part 11: Functionality of dead keys and repertoires of characters entered by dead keys

B

Standards confirmed

The following International Standards are confimred for a five year period:

TC 2 Fasteners

ISO 3506-3:2009

ISO 225:2010

TC 5 Ferrous metal pipes and metallic fittings

ISO 7-1:1994 (reconfirmed)

ISO 49:1994 (reconfirmed)



TC 14 Shafts for machinery and accessories








TC 17 Steel

ISO 10893-6:2011

ISO 10893-7:2011

TC 20 Aircraft and space vehicles


TC 22 Road vehicles




















TC 23 Tractors and machinery for agriculture and forestry


ISO 4254-10:2009

ISO 4254-11:2010

ISO 17103:2009

TC 27 Solid mineral fuels


TC 28 Petroleum products and related products of synthetic or biological origin


TC 29 Small tools


TC 31 Tyres, rims and valves

ISO 4251-3:2006

ISO 13442:2004

TC 33 Refractories


TC 34 Food products









ISO 11701:2009

TC 38 Textiles



ISO 14419:2010



TC 39 Machine tools








TC 41 Pulleys and belts (including veebelts)




TC 42 Photography




ISO 1222:2010


ISO 1754:2010


ISO 18901:2010





ISO 18911:2010



ISO/TS 22028-3:2012

ISO/TS 22028-4:2012

TC 44 Welding and allied processes

ISO 11745:2010

ISO 10675-2:2010

ISO 11666:2010

ISO 17640:2010

ISO 23279:2010

TC 45 Rubber and rubber products

ISO 6472:2010

ISO 813:2010


ISO 4647:2010



ISO 7619-1:2010

ISO 7619-2:2010






ISO 10638:2010










ISO 7231:2010






ISO 22762-1:2010

ISO 22762-2:2010

ISO 22762-3:2010

ISO 32100:2010

TC 54 Essential oils














ISO 14715:2010

TC 61 Plastics

ISO 25337:2010

TC 70 Internal combustion engines

ISO 7967-5:2010

ISO 7967-9:2010

TC 72 Textile machinery and accessories

ISO 16853:2010

TC 74 Cement and lime

ISO 29581-2:2010

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

ISO 8536-2:2010

TC 96 Cranes




TC 106 Dentistry

ISO 7885:2010

ISO/TS 22595-1:2006

(reconfirmed)

TC 111 Round steel link chains, chain slings, components and accessories


TC 112 Vacuum technology

ISO 27892:2010

TC 119 Powder metallurgy




ISO 4498:2010

ISO 23519:2010

ISO 11876:2010

TC 123 Plain bearings

ISO 4378-4:2009

ISO 4378-5:2009

TC 126 Tobacco and tobacco products



TC 131 Fluid power systems




TC 138 Plastics pipes, fittings and valves for the transport of fluids






TC 145 Graphical symbols

IEC 80416-1:2008


TC 146 Air quality

ISO 21438-3:2010

TC 150 Implants for surgery

ISO 6474-1:2010



TC 159 Ergonomics

ISO 9241-210:2010

ISO 9241-400:2007

(reconfirmed)

TC 165 Timber structures

ISO 15206:2010

TC 172 Optics and photonics







ISO/TR 14880-5:2010





TC 173 Assistive products for persons with disability


TC 178 Lifts, escalators and moving walks

ISO 22199:2009

ISO/TS 22559-4:2011

TC 182 Geotechnics


ISO/TS 22475-2:2006

(reconfirmed)


TC 184 Automation systems and integration

ISO 10303-31:1994

(reconfirmed)

ISO 10303-224:2006

(reconfirmed)

ISO 22745-1:2010

ISO 22745-2:2010

ISO 22745-11:2010

ISO 22745-20:2010


TC 190 Soil quality














TC 199 Safety of machinery

ISO 29042-5:2010

ISO 29042-6:2010

ISO 29042-7:2010

TC 204 Intelligent transport systems


ISO/TS 16407-1:2011

ISO 25111:2009


ISO/IEC 8348:2002

(reconfirmed)

ISO/IEC 9834-

3:2008

ISO/IEC 13865:2003

(reconfirmed)

ISO/IEC 13868:2003

(reconfirmed)

ISO/IEC 13873:2003

(reconfirmed)

ISO/IEC 14476-5:2008

ISO/IEC 14843:2003

(reconfirmed)

ISO/IEC 15052:2003

(reconfirmed)

ISO/IEC 15056:1997

(reconfirmed)

ISO/IEC 15771:1998

(reconfirmed)

ISO/IEC 15773:1998

(reconfirmed)

ISO/IEC 15992:2003

(reconfirmed)

ISO/IEC 17878:2003

(reconfirmed)

ISO/IEC 21989:2002

(reconfirmed)

ISO/IEC 22535:2009

ISO/IEC 14165-133:2010

ISO/IEC 14543-5-1:2010

ISO/IEC 14543-5-22:2010

ISO/IEC 24739-3:2010

Standards withdrawn

Period from 01 June to 30 June 2015

TC 10 Technical product documentation

ISO 2594:1972 (replaced by ISO 128-43:2015)

TC 34 Food products

ISO 6495:1999 (replaced by ISO 6495-1:2015)

ISO 5508:1990 (replaced by ISO 12966-1:2014, ISO 12966-4:2015)

ISO 15304:2002 (replaced by ISO 12966-1:2014, ISO 12966-4:2015)

TC 106 Dentistry

ISO/TS 11080:2009

(replaced by ISO 16954:2015)


ISO 7530-2:1990 (replaced by ISO 7530-1:2015)





TC 213 Dimensional and geometrical product specifications and verification

ISO/TS 16610-22:2006

(replaced by ISO 16610-22:2015)

ISO/TS 16610-41:2006

(replaced by ISO 16610-41:2015)

TC 229 Nanotechnologies

ISO/TS 27687:2008

(replaced by ISO/TS 80004-2:2015)

CASCO Committee on conformity assessment

ISO/IEC 17021:2011

(replaced by ISO/IEC 17021-1:2015)


ISO 9127:1988 (replaced by ISO/IEC 26514:2008)

ISO/IEC 26300:2006

(replaced by ISO/IEC 26300-1:2015, ISO/IEC 26300-2:2015, ISO/IEC 26300-3:2015)