isomat_product list_ 2012
TRANSCRIPT
Product List
Wat
erpr
oofin
gM
ater
ials
Conc
rete
& M
orta
rAd
ditiv
esTi
le A
dhes
ives
& Gr
outs
Repa
iring
Mat
eria
ls&
Pain
ts
Prem
ixed
Pla
ster
sIn
dust
rial F
loor
ings
C O N T E N T S Page
1. Waterproofing Materials
2.2 Mortar Additives2.1 Concrete Additives
2.3 Auxiliary Concreting Agents
2. Concrete & Mortar Additives222526
Tools & AccessoriesProduct Index
8486
Appendix
6. Industrial Floorings6.1 Cement-Based Floorings6.2 Impregnations for Cement-Based Floorings6.3 Epoxy-Cement Based Floorings
76777878
46
1.1 Waterproofing of Basements & Tanks1.2 Waterproofing of Terraces1.3 Waterproofing of Walls
1.5 Waterproofing Materials for Joints1.6 Roofing Membranes1.7 Drainage Membranes
9
131617
1.4 Complementary Products - Reinforcements Waterproofing 11
4.1 Strengthening & Repairing of Concrete4.1.1 Cement-Based Materials4.1.2 Epoxy-Based Materials4.1.3 Fibre Reinforced Polymers (F.R.P.)
4. Repairing Materials & Paints
44
4644
48
4.3 Putties, Paints & Protective Materials4.2 Construction and Repairing of Masonry Wall
4.3.1 Putties4.3.2 Emulsion Paints & Primers4.3.3 Acrylic Paints & Primers4.3.4 Enamel Paints & Primers
4.4 Cleaning Agents4.5 Elastic Joint Sealants4.6 Bituminous Repairing Materials
5049
53
56
50
5654
58
6260
65
5. Premixed Plasters5.1 Cement-Based Plasters5.2 Acrylic Plasters5.3 Silicone Plasters
7172
68
5.4 Plaster Primers5.5 Plastering Reinforcement Materials
7374
3.1 Tile Adhesives3.2 Tile Grouts
3. Tile Adhesives & Grouts3034
3.3 Adhesives for Special Applications 39423.4 Complementary Products
6.4 Epoxy-Based & Polyurethane-Based Floorings
4.3.5 Epoxy Paints & Primers4.3.6 Protective materials & Varnishes
3
1. Waterproofing Materials
1.3 Waterproofing of Walls
1.1 Waterproofing of Basements & Tanks
1.2 Waterproofing of Terraces
1.6 Roofing Membranes
1.7 Drainage Membranes
1.5 Waterproofing Materials for Joints
1.4 Products - Reinforcements
Complementary Waterproofing
1.1 Waterproofing of Basements & Tanks
4
1. Waterproofing Materials
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
AQUAMAT0317/1
4
4
54160
16054
54
25 kg5 kg
5 kg25 kg
25 kg
Grey
White
Light Blue
Cement-based brushable sealing slurry
AQUAMAT-PENETRATE0344/1
542 0 kg
Brushable sealing slurry with crystallizing effect
AQUAMAT-FLEX0314/1
Flexible, 2-component, brushable sealing slurry
(A+B) (A+B)
Grey
18 kg 18
33 kg(A+B)
54(A)54(B)
AQUAMAT-ELASTIC0338/1
Elastic, 2-component, brushable sealing slurry
(A+B)
(A+B)
(A+B)
(A+B)
(A+B)
35 kg
35 kg
7 kg
18 kg
Grey
White54 (B)(A)
54(A)
48
1854(B)
AQUAMAT-MONOFLEX0317/1
Flexible, one-component,brushable sealing slurry
Flexible, one-component, polymer-modified brushable sealing slurry. It is used for waterproofing surfaces of concrete, plaster, brick, cement, mosaics etc. Suitable in cases where elasticity of the waterproofing layer is required, such as roofs and bathrooms that will be covered with tiles, inverted roofs, under ground tanks etc. Color: Grey.
Consumption: 2,0-4,0 kg/ 2m
5418 kg
NEW
Cement-based, brushable sealing slurry. It offers total waterproofing against water pressure up to 7 atm according to DIN 1048. Ideal for waterproofing basements and reservoir tanks. Suitable for potable water tanks according to W-347, ISO 8467. Ideal for the internal (negative side) waterproofing of underground areas, since it can withstand negative water pressure.Color: Grey, white, light blue.
2Consumption: 2,0-4,0 kg/m .
Flexible, two-component brushable sealing slurry (25 kg ofcement powder + 8 kg of resin emulsion). Suitable forwaterproofing substrates that show or are expected to showhaircracks due to contractions-expansions or vibrations.Ideal for surfaces that will be covered with tiles, inverted roofs,under ground water tanks etc. Color: Grey. Packages: 33 kg (25 kg A+8 kg B),18 kg (13,6 kg A+4,4 kg B)
2Consumption: 2,0-4,0 kg/m .
Elastic, two-component brushable sealing slurry. Suitable for waterproofing substrates that show or are expected to show haircracks due to contractions-expansions or vibrations. Idealfor roofs, flower stands, swimming pools, tunnels, above ground water tanks etc. Also, for waterproofing under tiles combined with the elastic tile adhesive Isomat AK-ELASTIC.Color: Grey, white. Packages: 35 kg (25 kg A+10 kg B),18 kg (12,9 kg A+5,1 kg B) & 7 kg (5 kg A+2 kg B).Consumption: 22,0-4,0 kg/m .
Cement-based brushable sealing slurry. It penetrates the mass of the concrete and waterproofs it. It remains permanent active, and therefore, it continuously protects construction from any water attack presence. It is capable of sealing hair cracks, even if they appear afterwards. It has resistance to both positive and negative water pressure. Suitable for waterproofing basements,foundations, manholes and tanks.Color: Grey.
2Consumption: 1,5 kg/m .
Waterproofing of Basements & Tanks
5
PLASTIPROOF0120/1
Plasticizer-waterproofing admixture (ASTM C-494, type A, ELOT EN 934-2:T2 & T9). Used for formulating concrete with low water permeability and improved physical properties.Color: Dark brown.
Consumption:0,2-0,5 kg per 100 kg of cement.
Plasticizer, type A - Concrete waterproofing admixture
*1000 kg240 kg
20 kg4
239725 kg
* Packages marked with an asterisk are available 3 days after reception of order.
DUROPRIMER-SG0402/2
10 kg 42(A+B) (A+B)
Two-component, solvent-free epoxy primer. It is used as a waterproofing layer on floors that are subjected to coatings that face problems with rising damp and will be covered with epoxy flooring systems or cement screeds. Moreover, it can be used as a primer under the DUROFLOOR epoxy system on substrates that are still damp or oil contaminated (first, the substrate should be cleaned from oils). Color: Light beige.
Consumption: 2600-1000 g/m .
Two-component epoxy primer for concrete floors
AQUAFIX0315/1
Rapid setting cement for instant plugging and sealing of water leaks.Color: Grey.
Consumption:Approx. 1,6 kg/lit.
Rapid-setting cement for instant sealing of water leaks
415
3275
240
15 kg5 kg1 kg
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
AQUAMAT ADMIX0317/1
Concrete waterproofingadmixture withcrystallizing effect
NEW
Concrete waterproofing admixture in powder form that is added during concrete preparation forming insoluble crystalline compounds. Improves resistance to water permeability and does not affect vapor permeability of concrete. It remains permanently active and receives equally well positive and negative hydrostatic pressure. Suitable for waterproofing foundations, basements, tanks, wastewater treatment, swimming pools etc. Color: Grey.
Consumption: 0,8-1,2 kg per 100 kg of cement.
5420 kg
6
Waterproofing Materials
1.2 Waterproofing of Terraces
ISOFLEX-PU
PRIMER-PU
0226/1
0227/1
25 kg
17 kg
6 kg
5 kg
4
4
33
33
120
120
One-component brushable, polyurethane, liquid membrane. Used for the continuous, free of seams or joints, elastic, vapor-permeable waterproofing of terraces.Color: White. Other colors by order.
Consumption:2Approx. 1,5 kg/m .
Brushable polyurethane waterproofing membrane
Primer of ISOFLEX-PU.Color: Transparent.
Consumption:20,2-0,3 kg/m .
Primer of ISOFLEX-PU
ISO-PRIMER0206/1 4
12
3972
324
20 kg5 kg1 kg
16 3201 kg
12 3601 kg
Primer of ISOFLEX and ISOFLEX-T25.Color: White.
Consumption:20,2-0,3 kg/m .
Primer of brushableelastomeric waterproofingmembranes
ISOFLEX0201/1
* kg150 25 kg15 kg
5 kg1 kg
412
32444
110360
Brushable elastomeric liquid membrane possessing high elasticity and durability. Used for jointless and seamless waterproofing of terraces.Color: White, redbrown.
Consumption:21,0-1,5 kg/m .
Brushable elastomeric waterproofing membrane
ISOFLEX-T25 0225/1
* kg150 25 kg15 kg
5 kg1 kg
412
3334272
360
Brushable elastomeric waterproofing membrane
Brushable elastomeric liquid membrane possessing high elasticity and durability even to extreme temperature conditions
0 0(from -25 C to +120 C). Used for the continuous, free of seams or joints, elastic, vapor-permeable waterproofing of terraces.Color: White, redbrown (The redbrown color is available in 1 kg, 5 kg and 15 kg packages.)
Consumption:21,0-1,5 kg/m .
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
7
Waterproofing of Terraces
ISOGUM P0801/4
25
2323
1m 10m x
(10 )2m
Roll
25
Plastomeric bituminous membrane (APP) reinforced with 2polyester cloth (180 g/m ) with or without mineral chipping.
Fixed by torch welding without using bituminous glue.
Plastomeric bituminous membrane (APP) reinforced with polyester
2cloth of 180 g/m2ISOGUM 4,5 P MIN WHITE (4,5 kg/m ).
PLAIN MEMBRANES 2ISOGUM 4 P (4,0 kg/m ).
MEMBRANES WITH MINERAL CHIPPING2ISOGUM 4 P MIN (4,0 kg/m ).
2ISOGUM 4,5 P MIN (4,5 kg/m ).
AQUAMAT-ELASTIC0338/1
Elastic, 2-component, brushable sealing slurry
(A+B)
(A+B)
(A+B)
(A+B)
(A+B)
35 kg
35 kg
7 kg
18 kg
Grey
White54 (B)(A)
54(A)
48
1854(B)
SM-161407/1
5 lit 4 72
Special solvent for polyurethane coatings
Solvent used to dilute polyurethane coatings. Especially suitable for diluting the brushable polyurethane waterproofing membrane ISOFLEX-PU, when applied by spraying. It can also clean tools used for the application of ISOFLEX-PU and also tools from epoxy coatings residues. Additionally it can be used as a thinner for epoxy coatings. For polyurethane coatings SM-16 is added in a proportion up to 10% by weight.
AQUAMAT-FLEX0314/1
Flexible, 2-component, brushable sealing slurry
(A+B) (A+B)
Grey
18 kg 18
33 kg(A+B)
54(A)54(B)
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Flexible, two-component brushable sealing slurry (25 kg ofcement powder + 8 kg of resin emulsion). Suitable forwaterproofing substrates that show or are expected to showhaircracks due to contractions-expansions or vibrations.Ideal for surfaces that will be covered with tiles, inverted roofs,under ground water tanks etc. Color: Grey. Packages: 33 kg (25 kg A+8 kg B),18 kg (13,6 kg A+4,4 kg B)
2Consumption: 2,0-4,0 kg/m .
Elastic, two-component brushable sealing slurry. Suitable for waterproofing substrates that show or are expected to show haircracks due to contractions-expansions or vibrations. Idealfor roofs, flower stands, swimming pools, tunnels, above ground water tanks etc. Also, for waterproofing under tiles combined with the elastic tile adhesive Isomat AK-ELASTIC.Color: Grey, white. Packages: 35 kg (25 kg A+10 kg B),18 kg (12,9 kg A+5,1 kg B) & 7 kg (5 kg A+2 kg B).Consumption: 22,0-4,0 kg/m .
AQUAMAT-MONOFLEX0317/1
Flexible, one-component,brushable sealing slurry
Flexible, one-component, polymer-modified brushable sealing slurry. It is used for waterproofing surfaces of concrete, plaster, brick, cement, mosaics etc. Suitable in cases where elasticity of the waterproofing layer is required, such as roofs and bathrooms that will be covered with tiles, inverted roofs, under ground tanks etc. Color: Grey.
Consumption: 22,0-4,0 kg/m .
5418 kg
NEW
8
Waterproofing Materials
Waterproofing of Terraces
ISOMAC1018/6
20 kg 365 kg 120
Bituminous mastic
5 kg 120ISOLAC-BT1015/6
3617 kg
Bituminous varnish
ISOPAST
ISODI N 4 PF ALUE
ISOGUM 3V
1014/6
0811/4
0810/4
36
25
30
19 kg
Roll
Roll
1m x 10m
1m x 10m
2(10m )
2(10m )
Bituminous emulsion with excellent adhesion and resistance to acid and alkaline solutions. Used for waterproofing foundations, retaining walls, floors, inclined (pitched) roofs etc. Also used as a primer for fixing bituminous membranes.Color: Black.
Consumption:2Approx. 0,2-1,0 kg/m /layer.
Bituminous emulsion
Plastomeric bituminous membrane reinforced with fiberglass 2tissue (50 g/m ). Fixed by torch welding without using
bituminous glue.
2Weight: 3,0 kg/m .
Plastomeric bituminous membrane reinforced with
2fiberglass tissue (50g/m )
Elastomeric bituminous membrane reinforced with polyester 2cloth (150 g/m ) and covered with aluminium sheet. Fixed by
torch welding without using bituminous glue.
2Weight: 4,0 kg/ m .
Elastomeric bituminous membrane covered with aluminium sheet
5 kg 120
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Bituminous waterproofing varnish with solvents. Provides excellent adhesion to all kinds of substrates and water impermeability. Used as a primer for fixing bituminous membranes, as a vapor-barrier in insulations, and for protecting concrete or metal surfaces from moisture (protection against oxidation). It is applied in 1-3 layers by roller or brush.Color: Black.
2Consumption: On metal surfaces: 100-150 g/m /layer. 2On concrete surfaces: 250-300 g/m /layer.
Bituminous mastic with excellent adhesion and elasticity. It can be cold-applied with a smooth trowel. Suitable for sealing joints on horizontal and vertical surfaces, for sealing-bridging hair cracks and for flashing (sealing) difficult points during the fixing of bituminous membranes (drainpipes, joints or junctions in parapets etc). Also used for repairing in waterproofing layers formed by bituminous membranes.Color: Black.
Consumption: 1,2-1,3 kg/lit.
(former ISOLAC)
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
9
0228/1
NAN0-SEAL
Waterproofing and stabilisation of surfaces
Highly penetrative, polymer emulsion. Applied on porous substrates stabilizes and protects them from the humidity and the creation of salt stains. Nano-seal prevents the growth of mould and fungi on the surface of the substrate. It can be over-coated with paint.Color: Light blue (transparent after drying).
Consumption: 2 100-200 g/m depending on the absorptivity of the substrate.
412
722
324
FLEX-PRIMER0224/6
High quality acrylicwater-based primer
412
220 kg5 kg1 kg
20 kg10 kg
5 kg1 kg
4472
39
324
Highly penetrative, polymer aqueous emulsion. Used in combination with the highly elastic waterproofing paint FLEXCOAT, it forms an ideal system for the waterproofing of walls. It is also the ideal primer for the acrylic pasty plaster MARMOCRYL. Color: White.
2Coverage: 5-10 m . The package of 10kg is available in round, plastic container that is useful for preparing colored primer. A colored primer is necessary when the substrates will be covered with acrylic plasters of base D & TR.
/kg
ISOPAST-RUBBER1014/6
36
Elastomer bituminousemulsion
19 kgElastomer bituminous emulsion consisting of high quality asphalt, resins and special additives. It has high durability in moisture and excellent elasticity. Provides excellent adhesion on various substrates like concrete, metal, wood etc. Itis used for waterproofing foundations, retaining walls, terraces, roofs, etc.Color: Brown-black.
Consumption:20,35-0,50 kg/m /layer.
* Packages marked with an asterisk are available 3 days after reception of order.
1.3 Waterproofing of Walls
FLEXCOAT0202/6 44
11010 lit
3 lit
White
NCSPallet
10 lit3 lit 4
4
44110High quality, elastic,
waterproofing paint
Elastic, waterproofing paint. Offers total water impermeability for the protection of walls against rain. It has high elasticity and crack bridging ability on surfaces that show hairline cracks. Suitable for painting and waterproofing walls, protecting of bituminous layers etc. For exterior and interior use. Colors: White.
266 selected colors NCS pallet (minimum orderquantity 10 lit).
2Coverage: 8-12 m per liter.
Waterproofing of TerracesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
10
Waterproofing Materials
Waterproofing of Walls
0228/1
NANOPRO-M
412
3972
324
20 lit5 lit1 lit
Nano-impregnation to protect surfaces against oils
0228/1
NANOPRO-L4
1272
324
3920 lit5 lit1 lit
2220 lit
Water-based emulsion with high penetrating ability, based on nano-molecular structure. Protects porous and slightly porous surfaces (marbles, granites etc) from oil stains, moisture and salt stains and prevents from fungi-mould growth. Suitable for concrete, masonry, plaster, tile grouts, gypsum boards, chip boards, natural stones etc. For indoor and outdoor applications. Color: White (transparent after drying)
Consumption: 250-100 /m , depending on the substrate's absorptivity.ml
Nano-impregnation to protect surfaces against oils
Water-based emulsion with highly penetrating ability based on nano-molecular structure. Protects unporous surfaces, from moisture and salt stains. Suitable for polished marbles, granites, tiles, porcelain etc. For indoor and outdoor applications. Color: White (transparent after drying)
Consumption: 250-70 /m , depending on the substrate's absorptivity.ml
412
3972
3240207/1
PS-21(former PROTESIL-W)
Silicone-based solution without solvents for waterproofing
418
241202880207/1
PS-20(former PROTESIL)
Silicone-based solution for waterproofing
0228/1
NANOPRO-C Water-based emulsion with high penetrating ability, based on nano-molecular structure. Protects porous surfaces from moisture and salt stains. Suitable for concrete, masonry, plaster, tile grouts, gypsum boards, chip boards, natural stones etc. For indoor and outdoor applications. Color: White (transparent after drying).
Consumption: 2100-200 /m , depending on the substrate's absorptivity.mlNano-impregnation for
protecting porous surfaces
20 lit5 lit1 lit
20 lit3 lit1 lit
412
392
72324
20 lit220 lit
5 lit1 lit
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Ready-to-use, silicone-based, transparent solution with solvents for waterproofing. It ensures extremely high water-repellence and long term protection. It can be applied on various surfaces (natural or synthetic stone, unpainted plaster, exposed masonry, decorative bricks, roof tiles, tiles, exposed concrete etc.) for their protection against rain effect. Also suitable for waterproofing tile joints.Color: Transparent
2Consumption: 0,2-0,4 lit/m .
Ready-to-use, silicone-based solution without solvents for waterproofing. It ensures extremely high water-repellence and long term protection. It is suitable for waterproofing of tile joints and the protection against rain effect of various surfaces like natural or synthetic stone, plaster, exposed masonry, decorative bricks, roof tiles, tiles, unpolished marble, exposed concrete etc.). It can be used even on slightly wet substrates.Color: White (transparent after drying)
2Consumption: 0,2-0,4 lit/m .
11
20
1203/1
TREVIRA
10 cm 50 mx
1 m 200 mx
1 m x 100 m 2(100 m )
2(200 m )
Roll
Roll
Thin polyester cloth2of 30 g/m , used for reinforcing of waterproofing layers such
as ISOFLEX, AQUAMAT-ELASTIC etc.
10 cm wide tapemade of the same material as above, used for the localreinforcing of waterproofing layers along cracks, joints orwall-floor junctions.
Polyester cloth for reinforcing waterproofing layers
1205/1
1 m x 50 m 2(50 m )
20
FIBERGLASS MESHFORWATERPROOFINGLAYERS
10 cm 50 mx
Roll
Roll
1.4 Complementary Waterproofing Products - ReinforcementsPS/BOXPACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
100 cm wide meshmade of fibreglass, for total reinforcing of waterproofing layers (e.g. ISOFLEX membrane) in tough cases of multiple cracking.
2Weight: approx. 65 g/m .Mesh: 1,0 mm x 2,0 mm.
10 cm wide tapemade of the same material as above, used for the localreinforcing of ISOFLEX membrane along cracks or joints.
* Packages marked with an asterisk are available 3 days after reception of order.
AQUAMAT-F0215/1
3
4 72
*170 kg
6 kg2625 kg
Aqueous silicate solution used against rising damp on walls made of concrete or masonry. It can be applied either by impregnation or by a borehole procedure.Color: Transparent.
Consumption:2By boreholes: Approx. 18 kg/m of wall's cross-section. 2By impregnation: 200-300 g/m of wall’s surface.
Damp course against capillary rising damp
ISOMAT SL 170523/3
44110
15 kg5 kg
Solvent-free elastomeric liquid membrane possessing high elasticity and durability. Used under tiles for jointless andseamless waterproofing of sanitary areas like bathrooms, showers etc. It can be applied by roller or spatula on concrete, plaster, gypsum-board, chipboard etc.Color: Grey.
Consumption:21,0-1,5 kg/m , depending on the nature of the substrate. Elastomeric liquid
membrane for waterproofing under tiles
Waterproofing of WallsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
12
Waterproofing Materials
Self adhesive butyl tape
0719/1 8 cm x 10 mISOMAT BUTYL TAPE RollSelf-adhesive butyl tape coated with non-woven polypropylene.
Used in wet areas for waterproofing under tiles, especially in places where there are cracks, joints etc. It can be covered with tile adhesives or brushable waterproofing materials.
Thickness: 0,9 mm
60
PS/BOXPACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
Complementary Waterproofing Products - Reinforcements
0630/1
112 cm 50 mx
1
25
25
25
10
12 cm 10 mx
14 cm 14 x cm
21 cm 21x cm
12 cm 12 x cm
42,5 cm 42,5 x cm
Special parts made of thermoplastic elastomer for waterproofing of moistured places.
Inner corner.
Outer corner.
Wall sealings.
Bottom sealings.
Joint sealing tape.Roll
Roll
WATERPROOFINGMATERIALS FORMOISTURED PLACES
DOMOSIL0623/6
High performance, general-purpose silicone sealant for sealing joints 3 to 40 mm wide, on surfaces of non-porous materials such as glass, aluminum, porcelain (e.g. tiles), ceramic etc.It cannot be overpainted.Color: Transparent, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
General-purpose silicone sealant
25 1.125280 mlTransparent
25 1.125280 mlWhite
13
1.5 Waterproofing Materials for JointsPACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
TIXOPHALTE0624/6 24 1.440310 ml
BlackReady-to-use, cold-applied elastoplastic adhesive bituminous mastic sealant. Possesses superior permanent flexibility and excellent adhesion to all kinds of materials under various conditions, even underwater.Color: Black.
Consumption:Approx.1,4 kg/lit of joint volume.
Elastoplastic & adhesive bituminous mastic sealant
ELASTOTAN0607/6 15600 ml
25 1.125280 ml
White15600 ml25 1.125280 ml
GreyElastomeric sealing and adhesive mastic with exceptional adhesion to all building materials e.g. glass, aluminium, wood, PVC etc. It features high mechanical strength and resistance to ageing and weather conditions. Suitable for sealing joints 3 to 50 mm wide.Color: White, grey.
Elastomeric adhesive mastic sealant
Consumption:Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
PS/E.-PAL.
0719/1
1 m x 15 mRoll
28
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
WATERPROOFING& UNCOUPLINGMEMBRANE
Suitable for waterproofing and uncoupling of sound and problematics substrates. Especially used in damp areas and on terraces, balconies etc. It can be placed on walls or floors and on a variety of substrates such as concrete, cement mortars, old tile layers, mosaics, masonry etc.
Complementary Waterproofing Products - Reinforcements
Waterproofing Materials for Joints
FLEX PU-400626/6
One-component, solvent-free polyurethane sealing and adhesive mastic. Exceptional adhesion to all building materials, e.g. concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor and indoor applications.Color: White, grey, .
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
brown
Polyurethane adhesiveand sealant
1.000
1.000
12 1.560310 ml
12 1.560310 ml
20
20
600 ml
600 ml
Grey
White
1.00012 1.560310 ml20600 ml
Brown
14
Waterproofing Materials
DOMOSIL-S0622/6
Mildew-resistant silicone sealant
25 1.125280 mlTransparent
25 1.125280 mlWhite
DOMOSIL-MICRO0622/6
DOMOSIL-POOL0622/6
High performance, anti-mould silicone sealant with built-in antibacterial protection technology. Remains color
stable even after 10 years. Appropriate for sealing joints of 3-40mm wide in non-porous materials such as glass, aluminium, porcelain and non-porous ceramics. It is applied in high humidity areas such as kitchens, bathrooms, etc. It is not recommended for use in aquariums and cannot be overpainted.Color: Transparent, white.Consumption: Joint 10mm x 10mm: 1 cartridge/3 m of joint length. Joint 5mm x 5mm: 1 cartridge/12 m of joint length.
®Microban
Anti-mould silicone sealant with built in
technology®Microban
Silicone sealant for permanent water mmersion
Silicone sealant resistant to permanent water immersion such as swimming pools, aquariums etc. Appropriate for sealing vertical or horizontal joints 3-40mm wide, for indoor and outdoor applications. It has very good adhesion on surfaces such as glass, porcelain, aluminium, ceramics etc. Suitable for sealing joints on boats, glass- structures etc. It cannot be overpainted. Color: transparent.Consumption: Joint 10mm x 10mm: 1 cartridge/3 m of joint length.Joint 5mm x 5mm: 1 cartridge/12 m of joint length.
12 900280 mlTransparent
12 900280 mlWhite
25 1.125280 mlTransparent
High performance, mildew resistant silicone sealant for sealing joints 3 to 40 mm wide, on surfaces of non-porous materials such as glass, aluminum, porcelain (e.g. tiles), ceramic etc. Also suitable for applications in high moisture sanitary areas such as bathrooms and kitchens, as well as in hospital areas, laboratories etc. Prevents fungi development that creates stains and black spots. It is not recommended for aquariums since it contains fungicide. It cannot be overpainted. Color: Transparent, white.Consumption: Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
FLEX PU-200627/6
12 1.5601.000
1.000
310 ml20
20
600 ml
600 ml
Grey
White
One-component, solvent-free polyurethane sealing mastic. Ideal for sealing joints where high elasticity is required. Suitable for joints in concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor and indoor applications.Color: Grey, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
Polyurethane construction joint sealant
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Roofing Membranes
15
0625/6 30 m/box 30
WATERSTOP 1520 RollTape made of special treated bentonite and caoutchouc. Suitable for sealing and waterproofing work joints in concrete elements (e.g. work joints between concrete slab and concrete wall).Dimensions: 15 mm x 20 mm.
Swelling bentonite tape
Elastomeric sealing and adhesive mastic with excellent bonding to any kind of building material such as glass, aluminium, wood, PVC etc. It features high mechanical strength and great endurance to ageing. It is also suitable for slightly wet substrates. It is used for strong, elastic adhesions. Color: Grey,
Consumption: Indicative consumption: 1 cartridge /10 linear meters.
redbrown.
0629/6
FLEX MS-45
Elastomeric adhesive and sealant
1.125280 mlGrey
25
25 1.125280 mlRedbrown
0626/6
Polyurethane adhesiveand sealant
FLEX PU-50 S
One-component, polyurethane sealing mastic with solvents. Ideal for sealing joints where high elasticity is required. Suitable for joints 5-50mm wide in concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles etc. For outdoor and indoor applications.Color: Grey, white.
Consumption: Joint 10mm x 10mm: 1 cartridge/3 m of joint length.Joint 5mm x 5mm: 1 cartridge /12 m of joint length.
One-component, polyurethane sealing and adhesive mastic with solvents. Exceptional adhesion to all building materials, e.g. concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles etc. Suitable for joints 5-30mm wide. For outdoor and indoor applications.Color: Grey, white.
Consumption:Joint 10mm x 10mm: 1 cartridge/3 m of joint length.Joint 5mm x 5mm: 1 cartridge /12 m of joint length.
0626/6
FLEX PU-30 S
Polyurethane sealant
75025 1500310 ml15600 ml
Grey
75025 1500310 ml15600 ml
White
75025 1500310 ml15600 ml
Grey
75025 1500310 ml15600 ml
White
NEW
NEW
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Two-component joint sealant based on polyurethane resins. Ideal for sealing horizontal and vertical concrete joints in floors and structures like reservoirs, canals etc.Available in two types: FLEX PU-2KV: For vertical surfaces. FLEX PU-2KH: For horizontal surfaces Color: Grey
Consumption: 1,45 kg/lit of joint volume
0633/6
FLEX PU-2K
2-component polyurethane joint sealant
5 kg 27(A)(A+B) 18(B)
4(A) 6(B)
NEW
16
Waterproofing Materials
DELTA-VENT S0716/4 251,5 m 50 m
(75 )
x2m
RollWaterproofing polypropylene roof membrane which is placed underneath the tile-bearing laths. Provides complete waterproofing, possesses exceptional vapour-permeability and great mechanical strength and it is easily laid due to its light weight (approx. 10,5 kg/roll).It is ideal for application in non-ventilated roofs with or without sheathing.
Waterproofing polypropylene roof membrane which is placed underneath the tile-bearing laths. Provides complete waterproofing, possesses exceptional vapour-permeability and great mechanical strength and it can be easily laid due to its light weight (approx. 9 kg/roll).It is ideal for application in non-ventilated roofs without sheathing.
Roofing membrane for non-ventilated roofs
Roofing membrane for non-ventilated roofs
DELTA-FOL PVE0715/4 321,5 m 50 m
(75 )
x2m
RollRoofing membrane placed underneath the tile-bearing laths. Provides complete waterproofing, allows breathing of the roof, possesses great mechanical strength and it is easily applied due to its light weight (approx. 12,5 kg/roll).It is ideal for application in ventilated roofs with sheathing.
Roofing membrane for ventilated roofs
DELTA-VENT N0716/4 321,5 m 50 m
(75 )
x2m
Roll
DRAGOFOL0717/4 401,5 m 50 m
(75 )
x2m
RollRoofing membrane placed underneath the tile-bearing laths. Provides complete waterproofing, allows breathing of the roof, possesses great mechanical strength and it is easily applied due to its light weight (approx. 10,5 kg/roll).It is ideal for application in ventilated roofs without sheathing.
White roofing membrane for ventilated roofs
1.6 Roofing MembranesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
DELTA-FOL PVG0701/4 251,5 x
(75 )
m 50 m 2m
RollRoofing membrane placed underneath the tile-bearing laths. Provides complete waterproofing, allows breathing of the roof, possesses great mechanical strength and it is easily applied due to its light weight (approx. 14,5 kg/roll).It is ideal for application in ventilated roofs with sheathing.
Roofing membrane for ventilated roofs
17
ROOF-TOP0704/4
30
1 m 30 m
(30 )
x2m
36
RollBituminous roofing membrane placed underneath the tile-bearing laths. Provides complete waterproofing and possesses great mechanical strength. Bears polyester reinforcement and double cover of perforated polyethylene film.
Bituminous roofing membrane
ROOF-TOP 800Roll weight: approx. 24 kg.
ROOF-TOP 600Roll weight: approx. 18 kg.
DELTA-NB0918/5 2 m x 20 m
2(40 m )15
1.7 Drainage MembranesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
RollDrainage membrane made of high density polyethylen0,5 mm thick, with dimples 8,0 mm high.
DELTA-FOL LP0710/4 501,5 m 50 m
(75 )
x2m
RollRoofing membrane placed underneath the tile-bearing laths. Provides complete waterproofing, allows breathing of the roof, possesses great mechanical strength and it is easily applied due to its light weight (approx. 7,5 kg/roll).It is ideal for application in ventilated roofs without sheathing.
Transparent roofing membrane for ventilated roofs
Roofing MembranesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
ISOMAT BUTYL TAPE ALU0719/4 60
Self adhesive butyl tapewith aluminum coating
10 cm 10 m xRollSelf-adhesive butyl tape coated with aluminum. Mainly used
for waterproofing and sealing on roofs and terraces, in places such as chimney-roof assemblies, roof vents etc. Suitable for repairs on roof tiles, sealing joints on the top of the roof etc.
Thickness: 0,6 mm
PS/BOXPACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
Drainage MembranesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
18
Waterproofing Materials
DELTATERMINATION BARS0905/5
20 ps./boxSpecial termination bars used to cover the top edge of DELTA drainage membranes in vertical applications.Bar length: 2 m.
DELTA-NP-DRAIN0910/5 52 m x 20 m
(40 )2m
RollDrainage membrane made of high density polyethylene0,6 mm thick, with dimples 8,0 mm high and polypropylene geotextile bonded to one side.
DELTA-FLORAXX TOP0913/5
Drainage membrane of high density polyethylene with octagonalshape dimples of 20 mm height and attached polypropylenegeotextile. Suitable for garden roofs.
122 m x 10 m 2(20 m )
Roll
DELTA-FLORAXX0913/5
Drainage membrane of high density polyethylene with octagonalshape dimples of 20 mm height. Suitable for garden roofs. 62 m x 20 m
2(40 m )
Roll
Drainage membrane
Drainage membrane
DELTA-MS0919/5 2 m x 20 m
(40 )2m
11RollDrainage membrane made of high density polyethylen
0,6 mm thick, with dimples 8,0 mm high.
DELTA WASHERS 0908/5
100 ps./bagThey are applied to the dimples of DELTA drainage membranes in points where the membrane is screwed, allowing secure installation without tearing.
DELTA SCREWS 0907/5
100 ps./boxUsed for the montage of DELTA drainage membranes as plugs or, in inverse, as bradawls bonded with their self-adhesive head to the substrate.
19
Drainage MembranesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
20
Waterproofing Materials
2. Concrete & MortarAdditives
21
2.1 Concrete Additives
2.3 Auxiliary Concreting Agents
2.2 Mortar Additives
2.1 Concrete Additives
PLASTIPROOF0120/1
22
2. Concrete & Mortar Additives
Plasticizer-waterproofing admixture (ASTM C-494, type A, ELOT EN 934-2:T2 & T9). Used for formulating concrete with low water permeability and improved physical properties.Color: Dark brown.
Consumption:0,2-0,5 kg per 100 kg of cement.
Plasticizer, type A - Concrete waterproofing admixture
*1000 kg240 kg
20 kg4
BEVETOL-SPL0111/1
REOTOL-SPL0121/1
Concrete superplasticizer (ASTM C-494, type A, D & G, ELOTEN 934-2:T11.1 and T11.2). When added to ready-mixedconcrete, increases workability without decreasing strength.When added during concrete preparation, reduces the amountof water required (reduction of w/c ratio) thus increasingstrength. Color: Dark brown.
Consumption:As superplasticizer (Type G): 0,6-0,8 kg per 100 kg of cement. At smaller dosages acts as plasticizer.
Concrete superplasticizer, type G
Concrete superplasticizer (ASTM C-494, type A & F, ELOT EN 934-2:T3.1 and T3.2). When added to ready-mixed concrete,increases workability without decreasing strength. When addedduring concrete preparation, reduces the amount of waterrequired (reduction of w/c ratio) thus increasing strength.Color: Dark brown.
Consumption:As superplasticizer (Type F): 0,2-1,4 kg per 100 kg of cement. At smaller dosages acts as plasticizer.
Concrete superplasticizer, type F
20 kg
ADIUM 1100128/1
Liquid polycarboxylic-based admixture acting as concrete superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. When added during preparation of concrete, reduces water demand up to 20%. When added to the ready-mixed concrete improves significantly its workability (fluid concrete), without need of additional water. Color: Light brown.
Consumption: 0,60-1,40 kg per 100 kg of cement.
Broad-use new generation concrete superplasticizer
239
*1000 kg*220 kg
*1000 kg
*1000 kg250 kg
20 kg5 kg
240 kg20 kg
4
23972
239
239725 kg
*1000 kg250 kg
20 kg
BEVETOL-RD0129/1
Concrete setting retarder - concrete superplasticizer(ASTM C-494: Type A, D and G, ELOT EN 934-2:T11.1 &T11.2). When added to the ready-mixed concrete improvesits workability and increases its setting time. Suitable forformulating high strength concrete, exposed concrete, pumpableconcrete etc. Color: Dark brown.
Consumption: 0,2-0,8 kg per 100 kg of cement.
Concrete setting retarderand concretesuperplasticizer, type G
239
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Concrete Additives
23
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
*250 kg20 kg
BEVETOL-VZ0112/1
239
Concrete setting retarder (ASTM C-494, type B, ELOT EN 934-2:T8). Increases setting time of concrete (delays setting) and improves its workability and its physical properties. Enables delivery of ready-mixed concrete to longer distances.Color: Dark brown.
Consumption:0,2-0,4 kg per 100 kg of cement. Concrete
setting retarder
ADIUM 1450128/1
New generationsuperplastisizer forprecast concreteelements.
*1000 kg*220 kg
20 kg2
39
ADIUM 1500128/1
New generation superplasticizer for precast concrete elements
*1000 kg*220 kg
20 kg2
39
20 kg
ADIUM 1300128/1
New generation superplasticizer for long-distance delivery of concrete
239
*1000 kg*220 kg
20 kg
ADIUM 1320128/1
New generationsuperplastisizer forconcrete with extendedslump retention.
239
*1000 kg*220 kg
NEW
NEW
Liquid polycarboxylic-based admixture acting as as concrete superplasticizer according to ELOT EN 934-2:T11.1 and T11.2. When added during preparation of concrete, reduces water demand up to 20%. When added to the ready-mixed concrete improves significantly its workability (self-compacting concrete) without need of additional water. Ideal for long-distance delivery of ready-mixed concrete when long slump retention and workability is required. Color: Dark brown. Consumption: 0,35-0,70 kg per 100 kg of cement.
Liquid polycarboxylic-based admixture acting as as concrete superplasticizer according to ELOT EN 934-2:T11.1 and T11.2. When added during preparation of concrete, reduces water demand up to 20%. When added to the ready-mixed concrete improves significantly its workability (self-compacting concrete) without need of additional water. Ideal for long-distance delivery of ready-mixed concrete when long slump retention and workability is required. Color: Brown. Consumption: 0,35-0,80 kg per 100 kg of cement.
Liquid polycarboxylic-based admixture acting as concrete superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. When added during preparation of concrete, reduces water demand up to 30%. When added to the ready-mixed concrete improves significantly its workability (self-compacting concrete), without need of additional water. Ideal for precast concrete elements. Color: Dark brown.
Consumption: 0,20-0,50 kg per 100 kg of cement.
Liquid polycarboxylic-based admixture acting as concrete superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. When added during preparation of concrete, reduces water demand up to 30%. When added to the ready-mixed concrete improves significantly its workability (self-compacting concrete), without need of additional water. Ideal for precast concrete elements. Color: Brown.
Consumption: 0,30-0,70 kg per 100 kg of cement.
AQUAMAT ADMIX0317/1
Concrete waterproofingadmixture withcrystallizing effect
NEW
Concrete waterproofing admixture in powder form that is added during concrete preparation forming insoluble crystalline compounds. Improves resistance to water permeability and does not affect vapor permeability of concrete. It remains permanently active and receives equally well positive and negative hydrostatic pressure. Suitable for waterproofing foundations, basements, tanks, wastewater treatment, swimming pools etc. Color: Grey.
Consumption: 0,8-1,2 kg per 100 kg of cement.
5420 kg
24
* Packages marked with an asterisk are available 3 days after reception of order.
392
72
1400 kg
20 kg290 kg
5 kg 4
ADINOL-RAPID 2H0124/1
Hardening accelerator for concrete
Hardening accelerator for concrete (ELOT EN 934-2:T7). It accelerates the process of growth of initial strength of concrete without affecting negatively the final strength. It contributes to the fast abstraction of formwork facilitating thus the fast casting. Color: Dark yellow.
Consumption: 1,0-2,0 kg per 100 kg of cement, depending on the desired result.
Concrete Additives
*1000 kg*250 kg
20 kg
RETADOL0122/1 2
39
Concrete setting retarder with plasticizing properties (ASTM C-494 type D, ELOT EN 934-2:T10). Increases setting time of concrete (delays setting) and improves its workability and its physical properties. Enables delivery of ready-mixed concrete to longer distances.Color: Dark brown.
Consumption:0,2-0,3 kg per 100 kg of cement.
Concrete setting retarder - Plasticizer
392
72
1400 kg
20 kg320 kg
5 kg 4
ADINOL-RAPID0124/1
Broad-use concrete setting accelerator-antifreezing agent (ELOT EN 934-2:T6). Reduces setting time of concrete (accelerates setting) in cases where fast work is required and allows safe concreting in low temperatures.Color: Dark yellow.
Consumption:1,0-2,0 kg per 100 kg of cement depending on the desiredsetting time.
Broad-use concrete setting accelerator - Antifreezing agent
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
2. Concrete & Mortar Additives
25
2.2 Mortar Additives
* Packages marked with an asterisk are available 3 days after reception of order.
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
23972
3244
12
220 kg20 kg
5 kg1 kg
ADINOL-DM0110/1
3393672
3244
12
150 kg20 kg10 kg
5 kg1 kg
ADIFLEX-B0113/1
Elastifying agent
Waterproofing admixture for mortars and non reinforced concrete with plasticizing properties. It is used for water-impermeable cement mortars, non-reinforced concrete,plasters etc.Color: Dark yellow.
Consumption:Cement mortars: 1 kg per 100 kg of cement. Plastering mortars: 1 kg per 100 kg of cement+lime. Concrete: 0,8 kg per 100 kg of cement.
Waterproofing admixture for mortars and non reinforced concrete
4530 kgASOLIT-POWDER0125/1
Mortar plasticizer in powder form. Replaces lime.Color: Beige.
Consumption:2,0-5,0 kg per mixer batch of half a bag (25 kg) of cement.
Mortar plasticizer in powder form - Lime replacement
23972
3244
12
*220 kg20 kg
5 kg1 kg
DOMOLIT-TR0103/1
Colorless mortar plasticizer and setting retarder. Replaces lime.
Consumption:For masonry and paving mortars: 50 g per 25 kg of cement. Plastering mortars: 75 g per 25 kg of cement.
Transparent mortar plasticizer - Lime replacement
Polymer dispersion - Elastifying agent for waterproofing slurries (when added to AQUAMAT or cement mortars) or cementitious tile adhesives (when added to Isomat AK 20, Isomat AK 10 etc.). Replaces all or part of the mixing water. Necessary for applications on dimensionally unstable substrates, subjectto vibration or contraction-expansion. Color: White.Consumption:5-10 kg per 25 kg bag of AQUAMAT, Isomat AK 20, Isomat AK 10 etc., depending on the desired elasticity.
239
32472
124
220 kg20 kg
1 kg5 kg
DOMOLIT0103/1
Mortar plasticizer and setting retarder. Replaces lime.Color: Dark brown.
Consumption:For masonry and paving mortars: 50 g per 25 kg of cement.For plastering mortars: 75 g per 25 kg of cement.
Mortar plasticizer - Lime replacement
26
Concrete & Mortar Additives
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
2.3 Auxiliary Concreting Agents
Deshuttering coating for all types of wooden or steel-faced formwork.Color: Dark yellow.
Consumption:2Approx. 60 ml/m .
Formwork deshuttering agent
SPLIT-20000211/1
*140 lit20 lit 39
Mortar AdditivesPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
339
32472
124
150 kg20 kg
1 kg5 kg
0114/1
ADIPLAST
Polymer latex for multiple improvements of mortars
Polymer latex (SBR). Improves the properties of mortars in several ways offering, e.g. increased bonding to substrate andflexibility, shrinkage reduction, higher resistance to chemicaleffects and abrasion, enhanced water impermeability etc.Ideal for creating the bonding layer between old and newconcrete or mortar.Color: White.Consumption:Added to the mixing water in proportion of ADIPLAST : water = 1:1 to 1:5.
324
39724
12
20 kg5 kg1 kg
DS-990116/1
Additive for tile adhesives and joint grouts. Improves properties such as bonding to substrate, abrasion resistance, water-impermeability.Color: White.
Consumption:Added to the mixing water in proportion of DS-99 : water = 1:1 to 1:2.
Additive for tile adhesives & joint grouts
LATEX0127/1
4
33972
150 kg20 kg
5 kg324121 kg
Latex admixture -Bonding Agent
Polymer latex. When added into the building mortars andcoatings, it increases bonding to the substrate, provides waterimpermeability and elasticity. It is suitable for creating bondinglayers, repairing mortars, floor screeds resistant to abrasion,waterproof cement mortars, mortars resistant to chemicals,plasters with high strength and water impermeability etc. Color: White.Consumption:Added to the mixing water in proportion of LATEX: water = 1:1 to 1:5.
27
Auxiliary Concreting Agents
* Packages marked with an asterisk are available 3 days after reception of order.
1327/6784
1.120
14
20600gr
POLYPROPYLENEFIBERS
Paper bag
Plastic bag
900gr
Polypropylene fibers 12 mm long, for reinforcing of concrete and mortars.
Consumption: 3 600-900 g/m of concrete.
3 900-1200 g/m of mortar.··
ISOCURE-A0223/1
Water-based, acrylic emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures the full hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. It is also suitable for vertical surfaces. There is no need of removing ISOCURE- A in case of subsequent layers on the concrete surface. Color: White (transparent after drying).
2Consumption: 0,15-0,20 kg/m , depending on application conditions.
Acrylic based concrete curing agent
3920 kg2220 kg
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
ISOCURE0223/1
Concrete curing agent
Paraffin-based, water emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures the full hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. In case of subsequent layers on the concrete surface, ISOCURE must be removed by water blasting.Color: Light yellow.Consumption:
20,15-0,20 kg/m , depending on application conditions.
239
220 kg20 kg
28
Concrete & Mortar Additives
3. Tile Adhesives & Grouts
3.2 Tile Grouts
3.1 Tile Adhesives
29
3.3 Adhesives Special Applications
for
3.4 Complementary Products
ISOMAT AK 90553/3
54
54
25 kg
25 kgGrey
White
3.1 Tile Adhesives
flex
ISOMAT AK 110550/3
ISOMAT AK 120552/3 54
ISOMAT AK 200558/3
25 kg
25 kg 54
9054
25 kg
15 kg25 kg
54
25 kg 54
5425 kg
5 kg
5 kg 4 160
4 160
ISOMAT AK 100501/3
454
160
454
16025 kg
25 kg
5 kg
5 kg
30
3. Tile Adhesives & Grouts
Grey
Grey
Grey
Grey
White
White
White
White
Cement-based tileadhesive C1
Cement-based tileadhesive, with no verticalslip C1 T
High performance,polymer-modified tileadhesive C2 E
High performance,polymer-modified tileadhesive C2 TE
High performance,flexible, polymer-modifiedtile adhesive C2 TE S1
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
High performance, polymer-modified adhesive for ceramic and porcelain tiles on critical substrates. It is characterized by extended open time and no vertical slip. Also suitable for fixing tiles on common substrates such as concrete, screeds, brickwork, plaster. For indoor and outdoor applications, on walls and floors. It offers high initial and final adhesive strength and resistance to moisture. It is classified as type C2 TE adhesive according to EN 12004.Color: Grey, white.
2 1,5-4,0 kg/m . Consumption:
High performance, flexible, polymer-modified adhesive for ceramic and porcelain tiles on critical substrates. It is characterized by extended open time, no vertical slip and flexibility. Also suitable for fixing natural stone and decorative bricks, on concrete, screeds etc. Recommended for substrates like old tile layers, floors with in-floor heating, swimming pools etc. For indoor and outdoor applications, on walls and floors. It is classified as type C2 TE S1 adhesive according to EN 12004 and EN 12002. Color: Grey, white.
2Consumption: 1,5-4,0 kg/m .
Cement-based tile adhesive. Suitable for fixing ceramic tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc. For indoor and outdoor applications. It is classified as type C1 adhesive according to EN 12004.Color: Grey, white.
Consumption:21,5-4,0 kg/m .
Cement-based tile adhesive, with no vertical slip. Suitable for fixing ceramic tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc. For indoor and outdoor applications.It is classified as type C1 T adhesive according to EN 12004.Color: Grey, white.
Consumption:21,5-4,0 kg/m .
High performance, polymer-modified tile adhesive with extended open time. Suitable for fixing ceramic and porcelain tiles on all common substrates, such as concrete, screeds, brickwork, plaster etc. For indoor and outdoor applications, on walls and floors. It is classified as type C2 E adhesive according to EN 12004.Color: Grey, white.
Consumption:21,5-4,0 kg/m .
extraflex
ISOMAT AK 220549/3
5490
5425 kg
25 kg15 kg
Tile Adhesives
31
Grey
White
High performance,flexible, polymer-modifiedtile adhesive C2 TE S1
5 kg 4 160
5 kg 4 160
extraflex
ISOMAT AK 250582/3
5425 kg
5 kg 4 160
High performance, elastic, polymer-modified tile adhesive C2 TE S2
High performance, elastic, polymer-modified adhesive for all type of tiles on deformable and vibrative substrates. It is characterized by extended open time, no vertical slip and elasticity. Also suitable for fixing tiles on concrete, screeds, plaster, old tile layers, floors with in-floor heating, swimming pools, metallic surfaces, etc. For indoor and outdoor applications, on walls and floors. It is classified as type C2 TE S2 adhesive according to EN 12004 and EN 12002.Color: White.
2Consumption: 1,5-4,0 kg/m
extraflex
ISOMAT AK-LIGHT0572/3
5418 kg
Light-weight, elastic tile adhesive C2 TE S2
Light-weight, elastic adhesive, for ceramic and porcelain tiles, on deformable substrates. It is characterized by extended open time, no vertical slip and high elasticity. Also suitable for fixing natural stone and decorative bricks, on concrete, screeds, plaster etc. Ideal wherever elasticity and adhesion strength are required like old tile layers, gypsum boards etc. For indoor and outdoor applications, on walls and floors. It is classified as type C2 TE S2 adhesive according to EN 12004 and EN 12002. Color: .
2Consumption: 1,0- 3,0 kg/m .Grey
ISOMAT AK-MEGARAPID0557/3
Two-component, fast-setting, flexible tile adhesive. It is characterized by extended open time and flexibility. Suitable for fixing ceramic and porcelain tiles, on concrete, screeds, plaster, mosaic, gypsum boards, terraces, floors with in-floor heating, swimming pools etc. Ideal for areas that must be ready for use within short time. For indoor and outdoor applications, on walls and floors. It is classified as type C2 FE S2 adhesive according to EN 12004 and EN 12002. Package: 33 kg (25 kg A+8 kg B). Color: White.
2Consumption: 1,5-4,0 kg/m
Two-component, fast-setting, flexible tile adhesive C2 FE S2
33 kg(A+B)
54(A)54(B)
ISOMAT AK-ECOLIGHT0572/3
5415 kg
Light-weight, flexible tile adhesive C2 TE S1
Light-weight, flexible adhesive, for all type of tiles on deformable substrates. It is characterized by extended open time, no vertical slip and high flexibility. Also suitable for fixing all type of tiles on concrete, screeds, plaster, old tile layers, floors with in-floor heating, swimming pools, metallic surfaces etc. For indoor and outdoor applications, on walls and floors. It is classified as type C2 TE S1 adhesive according to EN 12004 and EN 12002.Color:
2Consumption: 1,0-3,0 kg/mWhite
extraflex
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
High performance, flexible, polymer-modified adhesive for all type of tiles on deformable substrates. It is characterized by extended open time, no vertical slip and high flexibility. Also suitable for fixing tiles on concrete, screeds, gypsum board, old tile layers, floors with in-floor heating, swimming pools, metallic surfaces etc. It is ideal for applications on deformable and flexible substrates. For indoor and outdoor applications, on walls and floors. It is classified as type C2 TE S1 adhesive according to EN 12004 and EN 12002. Color: Grey, white.
2Consumption: 1,5-4,0 kg/m .
32
Tile Adhesives & Grouts
Tile Adhesives
ISOMAT AK-MARBLE0555/3
5425 kg
Polymer modified marble and granite adhesive C2 E
ISOMAT AK-GRAND0543/3 5425 kg
Grey
25 kg 54White
Polymer modified tile adhesive for decorative overlays C2 E
25 kg 54Beige
ISOMAT AK-RAPID0557/3 54
ISOMAT AK-STONE0556/3 54
25 kg
25 kg5 kg 4 160
54
25 kg
25 kg 54
Grey
Grey
White
White
Fast-setting polymer modified tile adhesiveC2 FT
Cement-based tile adhesive for thick layers (up to 15 mm). Suitable for fixing tiles or natural stone on walls or floors on surfaces made of concrete, brickwork, plaster etc. Possesses increased open time for application. For indoor and outdoor applications. It is classified as type C1 E adhesive according to EN 12004. Color: Grey, white.
Consumption:22,0-8,0 kg/m .
Coarse-grained tile and natural stone adhesiveC1 E
ISOMAT AK-ELASTIC0562/3
54(A)
48
54(B)(A+B)
(A+B) (A+B)
35 kg
7 kg
High performance,two-component elastictile adhesive C2 E S2
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
High performance, two-component elastic tile adhesive. It is characterized by extended open time and exceptional elasticity. Suitable for fixing ceramic and mosaic tiles wherever elasticity and adhesion strength are required like old tile layers, terraces, swimming pools, floors with in-floor heating etc. For indoor and outdoor applications, on walls and floors. It is classified as type C2 E S2 adhesive according to EN 12004 and EN 12002. Packages: 35 kg (25 kg A+10 kg B) & 7 kg (5 kg A+2 kg B).Color: White.
2Consumption: 1,5-4,0 kg/m .
Fast-setting, polymer modified cement-based tile adhesive. Suitable for fixing absorptive or non-absorptive tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc. Ideal in cases where the surfaces have to be delivered fast for use, e.g. work areas etc. It is qualified as non-slip (zero slipping of the tile). For indoor and outdoor applications. It is classified as type C2 FT adhesive according to EN 12004.Color: Grey, white.
2Consumption: 1,5-4,0 kg/m .
Coarse-grained, polymer modified, cement-based tile adhesive for thick layers (up to 15 mm). Suitable for fixing and pointing decorative overlays (artificial stone, slate, decorative bricks etc.) on walls or floors on various surfaces and especially where high adhesion and moisture resistance are required. Possesses increased open time for application. For indoor and outdoor applications. It is classified as type C2 E adhesive according to EN 12004. Color: Grey, white, beige.
2 2Consumption: Fixing: 2,0-8,0 kg/m . Pointing: 1,0-4,0 kg/m .
Fast-setting, polymer modified, cement-based marble and granite adhesive. Suitable for fixing marble or granite on walls or floors on various surfaces and especially where high adhesion and moisture resistance are required. Prevents staining of sensitive overlays, such as marble layers, due to fast retention of water. Possesses increased open time for application. For indoor and outdoor applications. It is classified as type C2 E adhesive according to EN 12004.Color: White.
2Consumption: 1,5-6,0 kg/m .
33
Tile Adhesives
0574/3
ISOMAT AK-PRIMER
Adhesion primer for tile adhesives
Highly penetrative, polymer emulsion used as adhesion primer on smooth, absorbent or non-absorbent substrates, before the application of cement based tile adhesives.Color: Light purple.
Consumption:2100-200 g/m , depending on the absorptivity of the substrate.
ISOMAT AK 500575/3
Two-component epoxy tile adhesive
Tw -component solvent-free epoxy adhesive. It is suitable for fixing every type of tiles to several substrates, on walls or floorings. It has high adhesion strength and high chemical resistance. It can also be used for pointing tile joints.It is classified as type R2T according to EN 12004.Color: Light grey.
Consumption:2Approximately 1,75 kg/m /mm.
o 10 kg
5 kg
44
110
(A+B)
(A+B)
MULTIFLEX0517/3
22
24110264
25 kg5 kg1 kg
High performance, ready-to-use, pasty tile adhesive
ISOMAT AK-FLUX0563/3
5425 kg
Polymer-modified, full-bed leveling tile adhesive C2 E
Polymer-modified, cement- based tile adhesive with increased open time. After mixing with water, it attains fluid consistency. Suitable for thick layers (up to 20mm). Fields of application: Fixing absorptive and non-absorptive floor tiles on various surfaces. Ideal for fixing large tiles by the full-bed laying method and wherever the leveling and fixing of tiles on irregular substrate is required. For indoor and outdoor applications. It is classified as type C2 E according to EN 12004. Color: Grey.Consumption:
22,0-8,0 kg/m
412
72324
5 kg1 kg
3920 kg
UNI-PRIMER0209/1 4
12
3972
324
20 kg5 kg1 kg
Ready-to-use acrylic water-based primer. Stabilizes weak, loose or crumbling plasters.Color: White. Consumption:
2100-200 g/m .
Acrylic water-based primer
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Ready-to-use, pasty tile adhesive based on acrylic resins. It provides high initial and final adhesive strength, high elasticity and moisture resistance. Ideal for minor repairs due to its fast and easy application. Fields of application: Suitable for fixing tiles on surfaces such as concrete, plaster, gypsum-plaster, gypsum-board, cement-board, wood etc. Also appropriate for areas with high humidity such as bathrooms, kitchens, etc. It is used indoor on walls and floors and outdoor on walls. It is classified as type D2T adhesive according to EN 12004. Color: White.
2Consumption: 1-3 kg/m .
34
Tile Adhesives & Grouts
MULTIFILL0511/3
5 kg 1604 bags/
box
01 White
05 Light Grey
15 Manhattan Grey
03 Grey0 Pearl grey4
30 Cement Grey
10 Dark Grey11 Ivory12 Purple13 Red
02 Black
17 Anemone18 Pearl beige
19 Mocha
06 Bahama Beige
22 Magnolia23 Oregon24 Cinnamon
16 Light Ochre
21 Caramel
14 Cotto
20 Maroon
09 Light Brown08 Brown07 Redbrown
31 Ceramic
25 Crocus
27 Orange26 Green
32 Mykonos Blue33 Yellow34 Mint35 Tropical Sea36 Cypress
01 White
05 Light Grey
03 Grey0 Pearl grey4
10 Dark Grey11 Ivory12 Purple13 Red
02 Black
06 Bahama Beige
14 Cotto
09 Light Brown08 Brown07 Redbrown
Cement-based colored grout for pointing tile joints on walls or floors, for indoor and outdoor applications.It is classified as type CG2 WA tile grout according to EN 13888.
It is available in 2 types:
· MULTIFILL 2-5, suitable for joint width from 2 mm to 5 mm. · MULTIFILL 3-15, suitable for joint width from 3 mm to 15 mm.
Consumption:20,2-2,0 kg/m , depending on tile and joint
dimensions.
Colored tile grout classified as typeCG2 WA
0503/3
COLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
10 bags/box
2 kg 300
3.2 Tile Grouts
Tile Grouts
MULTIFILL
COLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
35
15 Manhattan Grey
30 Cement Grey
17 Anemone18 Pearl beige19 Mocha
22 Magnolia23 Oregon24 Cinnamon
16 Light Ochre
21 Caramel20 Maroon
31 Ceramic
25 Crocus
27 Orange26 Green
32 Mykonos Blue33 Yellow34 Mint35 Tropical Sea36 Cypress
25 kg 5401 White
05 Light Grey03 Grey
30 Cement Grey
10 Dark Grey06 Bahama Beige
21 CaramelMULTIFILL 2-5 is available in all 34 colors.MULTIFILL 3-15 is available only in colors marked with an asterisk (*).
MULTIFILLRAPID 1-80520/3
Fast-setting, cement based tile grout enriched with resins
Fast-setting, polymer-modified cement-based tile grout. It offers high mechanical strength, excellent color stability and high water-repellence. It gives smooth and glossy final surface. Suitable for joint width up to 8 mm. It is classified as type CG2 WA tile grout according to EN 13888. Used for grouting any kind of tiles on walls or floors, indoor or outdoor.
Consumption: 0,2-2,0 kg/ , depending on the size of the tiles and the width of the joint.
2m
4 kg 1604 bags/
15 Manhattan Grey17 Anemone
01 White
05 Light Grey03 Grey
30 Cement Grey
10 Dark Grey06 Bahama Beige
box
36
Tile Adhesives & Grouts
4 kg 1604 bags/
box
01 White
05 Light Grey
15 Manhattan Grey
03 Grey0 Pearl grey4
30 Cement Grey
10 Dark Grey11 Ivory12 Purple13 Red
02 Black
17 Anemone18 Pearl beige
19 Mocha
06 Bahama Beige
22 Magnolia23 Oregon24 Cinnamon
16 Light Ochre
21 Caramel
14 Cotto
20 Maroon
09 Light Brown08 Brown07 Redbrown
31 Ceramic
25 Crocus
27 Orange26 Green
32 Mykonos Blue33 Yellow34 Mint35 Tropical Sea36 Cypress
01 White
05 Light Grey
03 Grey0 Pearl grey4
10 Dark Grey11 Ivory12 Purple13 Red
02 Black
06 Bahama Beige
14 Cotto
09 Light Brown08 Brown07 Redbrown
Tile GroutsCOLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
*2 kg 110
MULTIFILL SMALTO 1-8 is a colored, modified, cement-based tile grout. It offers high mechanical strength, superb color stability and great water-repellence. Contains special bacteriostatic agents, which block the formation of bacteria on the grout. It gives a smooth and glossy final surface. Suitable for joint width from 1 mm to 8 mm. It is classified as type CG2 WA tile grout according to EN 13888.
Consumption:20,2-2,0 kg/m , depending on the tile
dimensions and the joint width.
polymer-
0511/3
Tile grout with porcelain effect, water-repellentCG2 WA
SMALTO 1-8MULTIFILL
COLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
15 Manhattan Grey
30 Cement Grey
17 Anemone18 Pearl beige
19 Mocha
22 Magnolia23 Oregon24 Cinnamon
16 Light Ochre
21 Caramel20 Maroon
31 Ceramic
25 Crocus
27 Orange26 Green
32 Mykonos Blue33 Yellow34 Mint35 Tropical Sea36 Cypress
20 kg 5401 White
05 Light Grey03 Grey
06 Bahama Beige
37
Tile Grouts
0511/3
MULTIFILL-STONE0556/3
25 kg 5401 White03 Grey06 Bahama Beige
Colored cement mortar for the building and grouting of stones
Colored polymer-modified cement mortar for building and grouting of natural or artificial stone, on wall and floor. It provides high initial and final adhesive strength, high mechanical properties and exceptional color stability. Suitable for joint width 5-40mm. Due to the special particle size granulation of the product, the mortar does not withdraw under the weight of the masonry units. It is classified as type M15 mortar for masonry according to EN 998-2 and as type CG2 grout according to EN 13888.
SMALTO 1-8MULTIFILL
10 Dark Grey
MULTIFILLMARBLE 0-30555/3
Grout for marbles
Colored, fine-grained, polymer-modified, cement-based grout. It offers high mechanical strength, superb color stability and great water-repellence. Suitable for joint width up to 3 mm. It is used for grouting marbles, granites, tiles, glass and marble mosaic, on walls or floors, indoor or outdoor. It is classified as type CG2 WA grout according to EN 13888.
Consumption: 0,2-1,3 kg/ depending on the size of marbles and the joint width.
2m ,
06 Bahama Beige17 Anemone
01 White02 Black05 Light Grey
4 kg 1604 bags/
box
16 Light Ochre
NEW
*The grout of 2 kg is packed in a plastic container.
38
Tile Adhesives & Grouts
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
Tile Grouts
MULTIFILL-EPOXYTHIXO0539/3
0538/3
MULTIFILL-EPOXYFLOW
Two-component epoxy grout for floorings
Two-component solvent free epoxy grout for floors. It is applied where high mechanical and chemical resistance is required. It can be ideally combined with special tiles for industrial use. Due to its fluidity, it is suitable for pointing floor tile joints in industrial areas, pools etc. It has excellent workability and is easily cleaned with water before hardening. It is classified as RG type grout according to standard EN 13888.Color: Light grey. Other RAL colors by special order (minimum quantity 300 kg).
2Consumption: 0,2-5,0 kg/m .
Two-component colored epoxy grout
Two-component solvent-free epoxy grout. It is applied where high mechanical and chemical resistance is required. It is ideally combined with special tiles for industrial use. It is suitable for pointing wall and floor tile joints in industrial areas, pools etc. It has excellent workability and it is easily cleaned before hardening. It is classified as RG type grout according to standard EN 13888.Colors: White, grey, light grey, black, bahama beige. Other colors by special order (minimum quantity 300 kg).Consumption: 0,2-5,0 kg/ 2m .
10 kg
5 kg
(A+B)
(A+B)
0540/3
ISOMAT GLITTER Colored metallic aggregates which when added to the epoxy grout MULTIFILL-EPOXY GLITTER a colored, decorative grout with particular aesthetic effect is created. ISOMAT-GLITTER is added in a proportion of up to 10% by weight.
100 Silver, 110 Green,120 Ôurquoise, 130 Violet,140 Pink, 150 Red,160 Red Brown, 170 Bronze,180 Beige, 190 Gold
200 gr 20
10 kg
5 kg
(A+B)
(A+B)
2 kg
44
110
MULTIFILL-EPOXYGLITTER0540/3
DecorativeTwo-component epoxy grout
Two-component decorative, solvent-free epoxy grout. With the addition of ISOMAT-GLITTER, a colored decorative grout with particular aesthetic effect is created. It is applied where high mechanical and chemical resistance is required. Ideally combined with glass mosaic tiles and tiles with high chemical resistance. Suitable for pointing wall or floor tile joints in residences, clubs, shops, industrial sites etc. It is classified as RG type grout according to standard EN 13888. 10 selected. Consumption: 0,1-4,0 kg/ .
Color:
2m
2 kg(A+B)
110
44
110
140(A+B)
MULTIF LL-ELASTICI0569/3 25 1.125280 ml
Cartr.One-component, colored, elastic joint sealant. Used for pointing tile joints on walls or floors, especially where high elasticity is required (expansion joints etc.). Suitable for indoor and outdoor applications.Color: White, light grey, grey, dark grey, anemone, bahama beige, caramel.
Consumption:Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.Colored elastic
tile joint sealant
3.3 Adhesives for Special Applications
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
ISOMAT AK-THERMO0335/3
5425 kg
Fiber-reinforcedadhesive for thermalinsulation boards
Fiber-reinforced, polymer-modified, cement-based non-slip adhesive. Suitable for fixing thermal insulation polystyrene boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed thermal insulation boards, it constitutes an ideal substrate for the subsequent MARMOCRET PLUS or MARMOCRYL layer. Possesses increased open time. Color: White. Consumption:
2As an adhesive: 2,0-4,0 kg/m . 2As a reinforced mortar: 1,5 kg/m /mm.
39
Fiber-reinforced, polymer-modified, cement-based adhesive. It is used in combination with the plasters MARMOCRET PLUS and MARMOCRYL, as a system for the external thermal insulation of buildings. Suitable for fixing thermal insulation polystyrene boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed thermal insulation boards, it constitutes an ideal substrate for the subsequent plaster layer. Color: Grey, white.Consumption: As adhesive: 3-4 kg/m². As a reinforced mortar: approx. 1,5 kg/m²/mm.
ISOMAT AK-T550335/3
5425 kg
5425 kg
Fiber-reinforced, polymer-modified cement-based adhesive. It is used in combination with the plasters MARMOCRET PLUS and MARMOCRYL, as a system for the external thermal insulation of buildings. Suitable for fixing thermal insulation polystyrene boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed thermal insulation boards, it constitutes an ideal substrate for the subsequent layer of plaster. Color: Grey, white. Consumption: As adhesive: 3-4 kg/m². As a reinforced mortar: approx. 1,5 kg/m²/mm.
Fiber-reinforced adhesive for thermal insulation boards
ISOMAT AK-T350335/3 54
54
25 kg
25 kg
Grey
Grey
White
White
Fiber-reinforced adhesive for thermal insulation boards
ISOMAT AK-T330335/3
5425 kg
Adhesive for thermal insulation boards
Cement-based adhesive for thermal insulation boards. Suitable for fixing thermal insulation polystyrene boards on cement-based substrates.Color: Grey
Consumption: 3,0-4,0 kg/m².
ISOMAT AK-T650335/3
5425 kgPolymer-modified, cement-based adhesive. It is used in combination with the plasters MARMOCRET PLUS and MARMOCRYL SILICONE as a system for the external thermal insulation of buildings. Suitable for fixing mineral wool boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed mineral wool boards, it constitutes an ideal substrate for the subsequent layer of plaster. Color: GreyConsumption: As adhesive: 5 kg/ .
As a reinforced mortar: approx. 1,5 kg/ /mm
2m2m
Adhesive for mineral wool boards
NEW
40
Tile Adhesives & Grouts
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
Adhesives for Special Applications
0577/3
ISOMAT MT 200
Pre-mixed, cement-based mortar for marbles
Pre-mixed, cement-based mortar for fixing marbles. It is used only with the addition of water. It simplifies and accelerates the applications.Color: White.
Consumption: 2Approx. 15 kg/m /cm.
5425 kg
ISOMAT AK-GLASS0324/3 4
54160
25 kg5 kg
Polymer modified cement-based adhesive for glass-blocks. Used for fixing and pointing glass-blocks.Color: White.
Consumption:2Approx. 13 kg for building 1 m of wall with ordinary glass
blocks.
Polymer modified adhesive for fixing and pointing glass-blocks
0571/3
Refractory mortar for laying and grouting firebricks
25 kg5 kg
ISOMAT AK-FIRE4
54160
ISOMAT AK-BLOCK0544/3 54
54
25 kg
25 kg
High quality polymer modified cement-based adhesive. Used for fixing aerated concrete elements. It possesses increased open time for application.Color: Grey, White.
Consumption:3Approx. 13 kg for building 1 m of aerated concrete wall.
Polymer modifiedadhesive for aerated concrete masonry
Refractory cement-mortar for firebricks. Suitable for laying and grouting all kinds of firebricks in areas where high temperatures are developed (fireplaces, wood ovens, stoves, barbecues, chimneys etc.). It provides excellent resistance to high temperatures and extensive temperature changes, high initial and final adhesive strength and resistance to moisture. Color: Grey.Consumption:Indicatively, for firebricks with dimensions 20x10x3 cm and
2joint width 1 cm the consumption is about 5 kg/m .
ISOMAT AK-THERMOISOMAT AK-THERMO0335/3
2425 kg
ACRYLReady-to-use, pasty coating, based on acrylic resins. It provides high elasticity and moisture resistance. Ideal for the external thermal insulation of buildings when applied in combination with the organic plasters MARMOCRYL and MARMOCRYL-SILICONÅ. When reinforced with fiberglass mesh and applied on the exterior side of fixed thermal insulation boards, it constitutes an ideal substrate for the subsequent organic plaster. Moreover, it can be used as an adhesive for fixing thermal insulation boards on the facade of buildings. Color: WhiteConsumption: As reinforced coat: approx. 3,0-4,0 kg/ .As adhesive: 2,0-5,0 kg/m².
m²
Acrylic, fiber-reinforced coating for thermal insulation boards
Grey
White
41
Adhesives for Special Applications
0631/3
ISOMAT AK-PARQUET 3612 kg/can
0630/3
MONTAGE-W310 ml
Solvent free pasty adhesive for fast and powerful bonding
High quality solvent free adhesive based on acrylic emulsion. It is used for fast and powerful bonding on all kinds of porous substrates, like wood, concrete, masonry, gypsum boards etc. No need for drilling, screwing or nailing. Suitable for bonding polystyrene insulation boards. Color: Aeige.
Consumption:Typical consumption: 1 cartridge/12 linear meters.
25 1.200Cartr.
High performance, one-component polyurethane adhesive for wooden floorings. Suitable for fixing and bonding all types of wooden floorings such as solid, lam parquet, strips, longstrips, planks, on cementious floors, wooden floors, ceramic tiles, marble, mosaic, metal surfaces, etc. Color: Beige.
Consumption:21,2-1,4 kg/m .
Polyurethane adhesive for wood floorings
0630/3
MONTAGE-S310 ml
Pasty adhesive for fast and powerful bonding
High quality pasty adhesive in a solvent solution. It is based on caoutchouc and synthetic resins. It is used for fast and powerful bonding on almost all construction materials. No need for drilling, screwing or nailing. Not suitable for bonding mirrors, polystyrene insulation boards or other materials sensitive to solvents. Color: Beige.
Consumption:Typical consumption: 1 cartridge/12 linear meters.
25 1.200Cartr.
ISOMAT AK-EPOXY
0573/3
Two-component, fast-setting epoxy marble and granite adhesive
Twomarbles, granites and most of the building materials to several substrates, on walls or floors. Suitable for fixing on vertical surfaces due to its fast setting (7 minutes). After hardening it has great chemical resistance and high compressive strength. Easy to use due to the simple mixing proportion of the two components (A:B = 1:1 by volume). Color: Grey-greenConsumption:Depends on the dimensions and weight of the bonded material.
-component solvent-free epoxy adhesive. Suitable for fixing
.
22
18
70
(A+B)
(A+B)
(A+B)
20 lit(A+B)
4 lit
1 lit
(A+B)
(A+B)
ISOMAT AK-EPOXY
0573/3
ÕÁËÏÐËÅÃÌÁNORMAL
Two-component epoxy marble and granite adhesive
Two-component solvent-free epoxy adhesive. Suitable for fixing marbles, granites and most of the building materials to several substrates, on walls or floors. After hardening it has great chemical resistance and high compressive strength.Easy to use due to the simple mixing proportion of the two components (A:B = 1:1 by volume)Color: Light yellow
Consumption:Depends on the dimensions and weight of the bonded material.
.
20 lit 22
18
70
(A+B) (A+B)
(A+B)
(A+B)4 lit
1 lit
(A+B)
(A+B)
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
42
Tile Adhesives & Grouts
WATERPROOFING& UNCOUPLINGMEMBRANE0719/1
1 m x 15 mRoll
28
3.4 Complementary Products
UNCOUPLINGMEMBRANE0719/3
Suitable for uncoupling of . Allows subsequent coverings to function as independent layers in relation with the substrate. Suitable for indoor walls or floors in a variety of substrates such as concrete, cement mortars, old layers of tiles, mosaics, masonry etc.
sound and problematics substrates
1 m x 30 mRoll
28
Suitable for waterproofing and uncoupling of sound and problematics substrates. Especially used in damp areas and on terraces, balconies etc. It can be placed on walls or floors and on a variety of substrates such as concrete, cement mortars, old tile layers, mosaics, masonry etc.
SUPERBOND-PU0631/3
White25 1.500280 ml
High performance one-component polyurethane adhesive, without solvents. It provides powerful bonding on all construction materials such as wood, concrete, aluminium, tiles etc. It is also suitable for every wood construction and for wood furniture industry. Color: White.
Consumption: Indicative consumption: 1 cartridge/12 linear meters.
Polyurethane adhesive for powerful bonding
Adhesives for Special ApplicationsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
4. & Paints
Repairing Materials
4.1 Strengthening & Repairing of Concrete
4.5 Elastic Joint Sealants
4.4 Cleaning Agents
4.6 Bituminous Repairing Materials
4.3 Putties, Paints & Protective Materials
4.2 & Repairing of Masonry Wall
Construction
43
FERROSEAL0331/1
4.1 Strengthening & Repairing of Concrete4.1.1 CEMENT-BASED MATERIALS
44
4. Repairing Materials & Paints
Polymer-modified brushable cement mortar used forprotecting reinforcement elements from corrosion and forcreating the bonding layer between old and new concrete ormortar.Color: Redbrown.
Consumption:As anticorrosive coating: 0,07-0,13 kg/m of reinforcement element.
2As bonding agent: approx. 2,0 kg/m .
Cement-based anticorrosive coating for reinforcement elements - Bonding agent
DUROCRET0310/1
454
160
54
54
5 kg25 kg
25 kg
25 kgRedbrown
4 1605 kg
4 1605 kg
Grey
White
Polymer-modified cement mortar, suitable for patching and repairing concrete, masonry and plaster, formation of grooves or ridgepoles etc.It is classified as PCC R2 mortar according to EN 1504-3.Color: Grey, white, redbrown.
Consumption:2Approx. 15,0 kg/m /cm.
Groove formation: 1,9-2,7 kg/m. Polymer-modified cement mortar
DUROCRET-FAST0310/1
5425 kgFast-setting, polymer-modified cement mortar. It provides high adhesion to the substrate, excellent workability and abrasion resistance. Suitable for repairing works on concrete, screeds, masonry etc. Workability time: 45 minutes.It is classified as PCC R2 mortar according to EN 1504-3.Color: Grey.
Consumption: 2Approx. 17 kg/m /cm of layer thickness.
For groove formation: 1.9-2.7 kg/m.
Fast-setting, repairing cement mortar
3232
25 kg15 kg
15 2401 kg6 755 kg
FERROSEAL-MCI0331/1
Impregnation- corrossioninhibitor
Water-based emulsion with highly penetrating ability that acts as a corrosion inhibitor of steel reinforcement. FERROSEAL-MCI penetrates the concrete and forms a protective layer on the surface of the reinforcing steel. Ideal for repairs of reinforced concrete. Also suitable as an anticorrosive protection for structures of reinforced concrete that are exposed on aggressive environment such as bridges, aquaducts etc. Color: Transparent.
2Consumption: Approx. 0,5 kg/m .
3920 kg
12 3241 kg4 725 kg
DUROCRET-DECO0310/1
5425 kgPolymer-modified, fiber-reinforced, cement mortar. It provides excellent adhesion to the substrate, waterproofing and abrasion resistance. For indoor and outdoor use in a variety of applications, on floors and walls, wherever aesthetic intervention is needed (e.g. Cycladic architecture) in homes, shops, hotels etc. Suitable for special structures such as built-in beds, built sanitary ware (sinks, bathtubs, showers etc.)Colors: white, grey, light grey, mocha, crocus, light ochre.
Consumption: Approx. 1,5 kg/ /mm.2m
Cement screed for surface finishing on floors and walls
White
Grey
Light Grey
Light Ochre
Mocha
Crocus
NEW
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Strengthening and Repairing of ConcreteCEMENT-BASED MATERIALS
45
MEGA RET-40C0322/1
25 kg 54High-strength, fibre-reinforced, cementitious repairing mortar. Suitable for highly demanding repairs of concrete elements. It is applied in layers up to 40 mm thick (per layer), by trowel or gunite machine.It is classified as CC R4 mortar according to EN 1504-3.Color: Grey.
Consumption:2Approx. 17,5 kg/m /cm. High-strength fibre-
reinforced repairing mortar
4 1605 kg
RAPICRET0316/1 4
54160
25 kg5 kg
Fast-setting patching mortar
Fast-setting cement mortar for patching and repairing concrete elements, fixing, anchoring, cavity sealing, formation of grooves etc. and generally when considerable strength and fast work are needed.It is classified as CC R3 mortar according to EN 1504-3.Color: Grey.
Consumption:2Approx. 17,5 kg/m /cm.
MEGACRET-100334/1
5425 kgHigh-strength, fibre-reinforced, thixotropic, cementitious repairing mortar. Suitable for highly demanding repairs of concrete elements. It is applied in layers up to 10 mm thick (per layer), by trowel or gunite machine.It is classified as CC R3 mortar according to EN 1504-3.Color: Grey.
Consumption:2Approx. 17,5 kg/m /cm. High-strength fibre-
reinforced repairing mortar
DUROCRETPENETRATE
0310/1
5425 kgRepairing and waterproofing cement mortar. It is suitable for indoor and outdoor applications on concrete, brickwork, for groove formation etc. Also it can be used for the waterproofing of concrete elements, in cases from simple moisture to water pressure. Suitable for waterproofing of basements, foundations, manholes, water tanks, sewage tanks etc. Color: Grey. Consumption:
2Approx. 17 kg/m /cm of layer thickness.For groove formation: 1.9-2.7 kg/m.
Repairing & waterproofing cement mortar with crystallizing effect
MEGA RET-40 FASTC0322/1
25 kg 54
Fast-setting,fibre-reinforced,high-strength cementitiousrepairing mortar
Fast setting, high strength, fibre-reinforced, cementitious repairing mortar. Suitable for fast repairs on concrete elements. It is applied in layers up to 40 mm thick (per layer), by trowel or gunite machine. It is classified as CC R4 mortar according to EN 1504-3. Color: Grey.
Consumption: Approx. 17,5 kg/ /cm.2m
NEW
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
46
Repairing Materials & Paints
EPOMAX-EK0421/1
96
96
240
6
15
2 kg
4 kg
1 kg
(A+B)
(A+B)
(A+B) (A+B)
(A+B)
(A+B) (A+B) (A+B)
Two-component epoxy putty. Used for bonding concrete and steel, repairing concrete, filling joints and sealingcracks that will be injected with EPOMAX-L10, EPOMAX-L20,DUREBOND.Color: Grey.
Consumption:2Approx. 1,85 kg/m /mm.
Two-component epoxy putty
4.1.2 EPOXY-BASED MATERIALS
EPOMAX-STUCCO0429/1
1 kg(A+B) (A+B)
Two-component, epoxy putty, extra fine-graded. Ideal forputtying any type of surfaces. It is also used for bondingconcrete, steel, stone, wood etc. as well as for restoringdamages on concrete and cement mortars. For limitedapplications, mixing of less quantity of the components A and Bis possible, by keeping ratio 1:1 by volume.Color: Grey.
Consumption:2Approx. 1,35 kg/m /mm hickness layer.t
Epoxy putty,Two-component,extra-fine graded
21618
MEGAGROUT-1000323/1
5425 kgHigh-strength, non-shrinking, pourable cast grout for repairs and strengthening. Suitable for concrete jacketing and filling of cavities and cracks in concrete elements, in a thickness upto 100 mm.It is classified as CC R4 mortar according to EN 1504-3.Color: Grey.
Consumption:2Approx. 21,5 kg/m /cm or 2,1 kg for filling volume of 1 lit.
High-strength, non-shrinking pourable cast grout for repairs and strengthening
MEGAGROUT-1010329/1
5425 kgHigh-strength, non-shrinking pourable cast grout. Suitable for machinery founding and tenancy, anchoring, precision grouting of base plates of precision machinery installations. Applied in a maximum thickness of 100 mm.It is classified as CC R4 mortar according to EN 1504-3.Color: Grey.
Consumption:2Approx. 21,5 kg/m /cm or 2,1 kg for filling volume of 1 lit.
High-strength, non-shrinking pourable cast grout for precision grouting of machinery
Strengthening and Repairing of ConcreteCEMENT-BASED MATERIALS
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
47
Strengthening and Repairing of ConcreteEPOXY-BASED MATERIALS
EPOMAX-ANCHOR0430/6
Fast curing anchoring adhesive for reinforcement rods
Two-component polyester based anchoring adhesive. It does not contain solvents and styrene. Suitable as an anchoring adhesive for reinforced bars, reinforced rods, threaded rods etc.Color: Dark grey.
Consumption: Depending on the application.
12 1.008300 mlCartr.
1308/6
100/ps.NOZZLESFOR EPOXY RESININJECTIONS
For the injection of EPOMAX-L10, EPOMAX-L20 and DUREBOND epoxy resins into structural elements.
EPOMAX-L200424/1
180151 kg(A+B) (A+B) (A+B)
Two-component, injectable, solvent-free epoxy resin. It is used for resin injections in concrete elements with cracks 0,1-1 mm wide, ideal fixing and anchoring of reinforcement rods in concrete elements etc. It can be perfectly applied even on damp substrates.Color: Transparent yellow.
Consumption:Approx. 1,1 kg for filling volume of 1 lit. Two-component,
injectable epoxy resin forcracks 0,1-1,0 mm wide
EPOMAX-L100418/1
72
180
6
15
3 kg
1 kg
(A+B) (A+B) (A+B)
(A+B) (A+B) (A+B)
Two-component, injectable, solvent-free epoxy resin. It is used for resin injections in concrete elements with cracks 0,5-3,0 mmwide, fixing and anchoring of reinforcement rods in concreteelements etc. It can be perfectly applied even on dampsubstrates.Color: Transparent yellow.
Consumption:Approx. 1,1 kg for filling volume of 1 lit. Two-component,
injectable epoxy resin forcracks 0,5-3,0 mm wide
DUREBOND0416/1
72
180
6
15
4 kg
1 kg
(A+B) (A+B) (A+B)
(A+B) (A+B) (A+B)
Two-component,injectable epoxy resin forcracks > 3 mm wide.Bonding agent
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Two-component, solvent-free epoxy resin, for bonding fresh concrete to hardened concrete. Also used as injectable resin mortar for resin injections in concrete elements with cracks 3,0 mm wide or more, fixing and anchoring of reinforcement rods in concrete elements etc. It can be perfectly applied even on damp substrates.Color: Grey. Consumption:
2As a bonding agent: approx. 0,6 kg/m . Approx. 1,5 kg for filling volume of 1 lit.
Repairing Materials & Paints
48
Strengthening and Repairing of ConcreteEPOXY-BASED MATERIALS
4.1.3 FIBRE REINFORCED POLYMERS (F.R.P.)
EPOMAX-PL1502/1
5 kg 72(A+B)
Two-component epoxy resin in pasty form. Suitable for bonding carbon plates used in the structural strengthening ofconstruction elements.
Consumption:21,6-1,7 kg/m /mm.
Two-component, epoxy adhesive paste for composite plates
MEGAWRAP-2001500/1 2060 c x 50 m
(30 )
m2m
RollFabric made of continuous unidirectional carbon fibres. Used for the structural strengthening of construction elements.
Carbon fabric for structural strengthening
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
EPOMAX-LD1501/1
5 kg 72(A+B)
Two-component epoxy resin without solvents. Suitable for theimpregnation and bonding of synthetic fibre fabrics such as glass fibre or carbon fibre fabrics etc., Used for thestructural strengthening or repairing of construction elementslike concrete, masonry, wood etc.Color: Grey.
Consumption:20,7-1,2 kg/m , depending on the application.
Two-component, epoxy impregnation adhesive for composite fabrics
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
0430/6
Plastic sleeve that is used in combination with EPOMAX-ANCHOR for anchoring reinforcement roads to hollow-blocks.
: KSH 15 x 130Type
Type: KSH 12 x 50
Type: KSH 15 x 85
10 ps./box
10 ps./box
10 ps./box
FOR HOLLOW-BLOCKS
PLASTIC SLEEVE
49
4.2 Construction and Repairing of Masonry Wall
UNICRET0309/1
54
5425 kg
25 kg
Grey
White
Mortar suitable for plastering and masonry works.It is classified as type GP CS II W0 mortar according to EN 998-1.Color: Grey, white.
Consumption:2Approx. 15,5 kg/m /cm.
Mortar for plastering and masonry
ISOMAT MT-80 S0576/1
5425 kgPre-mixed, cement-based mortar for masonry. Due to its special formula it prevents the formation of salts on masonries which are exposed to the weather conditions. It is used on various types of building materials such as bricks, blocks, stone, etc. It is classified as type M5 mortar for masonry according to EN 998-2.Color: Grey.
Consumption: Indicative consumption for bricks of dimensions 26x9x12 cm: 20 kg/m of masonry.
Pre-mixed, cement-based mortar for exposed masonry
0576/1
ISOMAT MT 80
Pre-mixed, cement-based mortar for masonry
Pre-mixed, cement-based mortar for masonry. It is used only with the addition of water. It simplifies and accelerates the applications. Used on various types of building materials such as bricks, blocks, aerated concrete blocks, stone, etc.It is classified as type M5 mortar for masonry according to EN 998-2. Color: Grey.
Consumption:Indicative consumption for bricks of dimensions
26x9x12 cm: 20 kg/m masonry.
5425 kg9015 kg
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
MEGAPLATE1503/1 5 cm x 100 m
5 cm x 50 m
10 cm x 100 m10 cm x 50 m
Roll
Roll
High-strength carbon fibre plate used for structural strengthening of construction elements. Industrial product manufactured from epoxy resins and unidirectional carbon fibres.Plate thickness: 1,2 mm.
Carbon plates for structural strengthening
Strengthening and Repairing of ConcreteFIBRE REINFORCED POLYMERS (F.R.P.)
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE
50
Repairing Materials & Paints
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
STUCCOCRET0326/6
54108
20 kg10 kg
4 kg
4.3 4.3.1
Putties, Paints & Protective MaterialsPUTTIES
4 160
Spatula putty for smoothing and preparing wall surfaces to be covered with paint or other coatings. Suitable for surfaces made of concrete or plaster. Replaces oil stuccos and other similar materials.It is classified as type GP CS II W0 mortar according toEN 998-1. Color: White.
Consumption:2Approx. 1,1 kg/m /mm. Spatula putty
4530 kgASOLIT-POWDER0125/1
Mortar plasticizer in powder form. Replaces lime.Color: Beige.
Consumption:2,0-5,0 kg per mixer batch of half a bag (25 kg) of cement.
Mortar plasticizer in powder form - Lime replacement
Construction and Repairing of Masonry WallPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
239
32472
124
220 kg20 kg
1 kg5 kg
DOMOLIT0103/1
Mortar plasticizer and setting retarder. Replaces lime.Color: Dark brown.
Consumption:For masonry and paving mortars: 50 g per 25 kg of cement.For plastering mortars: 75 g per 25 kg of cement.
Mortar plasticizer - Lime replacement
UNICRET-FAST0325/1 4
54160
25 kg5 kg
Fast-setting white mortar, ideal for quick plaster repairs in old and new constructions. Replaces the use of gypsum in respective applications.It is classified as type GP CS I W0 mortar according to EN 998-1.Color: White.
Consumption:2Approx. 14,7 kg/m /cm.
Fast-setting, white repairing mortar
51
Putties, Paints & Protective MaterialsPUTTIES
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
FLEX-COVER0222/6
1102,6 kg(A+B)
Two-component, flexible putty, for sealing joints and cracks
PLANFIX-FINE0308/1
4
54
160
25 kg
5 kg25 kg 54
Grey
White
Polymer-modified cement putty, extra fine-graded, for repairing and puttying exposed concrete. It can be also applied using a gunite machine.Color: Grey, white.
Consumption:2Approx. 1,3 kg/m /mm.
Polymer-modified cement putty, extra fine-graded
5425 kgPLANFIX-FINEPROFESSIONAL0308/1
Polymer-modified cementputty, extra fine-graded
Polymer modified cement putty, extra fine-graded, easily applicable, suitable for repairing and puttying exposed concrete, fixing of pores or cavities etc. Lightweight, it can be applied or sanded easily and has little consumption. It can be applied using a gunite machine. Classified as type PCC R1 mortar for concrete repairs, according to EN 1504-3. Color: White.
Consumption: Approx. 1,2 kg/ /mm.2m
NEW
Two-component, flexible putty that consists of a cement-based powder (component A) and a resin emulsion (component B). Suitable for sealing and waterproofing joints and cracks, on walls or floors. It can be also used on window recesses, junctions between floors and walls, as well as for puttying surfaces with hair-cracks. To be applied on plaster, cement, gypsum boards, wood etc. Ideal for outdoor applications.Color: White.Consumption: Joint 5 mm x 5 mm: 40 g/m of joint length.
2Puttying: 1,6 kg/m /mm.
PLANFIX0308/1 25 kg
25 kg
5 kg 454
54
160
Grey
White
Polymer-modified cement putty for repairing and puttying exposed concrete, fixing of pores or cavities etc.Color: Grey, white.
Consumption:2Approx. 1,3 kg/m /mm.
Polymer-modified cement putty
STUCCOCRET-PLUS0326/6
Polymer-modified spatula putty
Polymer-modified, cement-based putty. It is extra fine-graded and suitable for smoothing and preparing interior wall surfaces to be covered with paint or other coatings. Suitable for surfaces made of concrete or plaster. Replaces oil stuccos and other similar materials. Due to its low weight it is easy to use and covers up to 18% extra surface compared to the conventional putties. It id classified as type GP CS II W0 mortar according to EN 998-1. Color: White.
Consumption: Approx. 0,9 kg/ /mm.2m
5420 kg
NEW
52
Repairing Materials & Paints
0339/154Polymer-modified, fibre-reinforced, cement-based joint
compound for cement boards. It features great flexibility, high mechanical strength and superb adhesion to the substrate. It can be applied and rubbed easily. It provides a smooth final surface ready for any additional covering (paint, tiles etc.). Color: Grey.
Consumption:100-150 gr per joint meter.
20 kg
Joint compound for cement boards
JOINT-FILLER
CEMENTHIGH-STRENGTH0330/6
1604 kg 4
1604 kg 4
Grey
White
High-strength cement for preparing durable cement mortars.Color: Grey, white.
Putties, Paints & Protective MaterialsPUTTIES
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
GB-COVER0219/6
3360
20 kg7 kg
Ready-to-use acrylic spatula putty. Suitable for stuccoing (skim coat puttying) and pointing gypsum boards. Provides a flat and smooth final surface, ready for priming and painting.Color: White.
Consumption:22,0-3,0 kg/m , depending on layer thickness.
Pasty acrylic gypsum-board putty
FAST-COVER0220/6 8
90320
5 lit1 lit
0,5 lit 16 576
Ready to use, lightweight acrylic putty for filling and patching cracks and holes of any kind, in a single step. It is applied on plaster, gypsum board, wood etc. at a maximum thickness of 5 cm. It does not crack and it doesn’t need to be rubbed. Painting follows after 30 minutes. For indoor and outdoor application.Color: White.
Ready-to use, lightweight acrylic putty
newformula
53
Putties, Paints & Protective Materials4.3.2 EMULSION PAINTS & PRIMERS
FLEX-PRIMER0212/6
Acrylic, micronized, water based primer
PRIMER CLASSIC Acrylic, micronized, water based primer. It offers excellent bonding. Suitable for use on new surfaces, such as plasters, concrete, bricks etc., that are going to be coated with emulsion paints. Thinning: Up to 50% with clean water. For highly absorbing substrates use it undiluted. Color: Blue
Coverage: 2About 10-15 m per liter, per layer.
412
72
3960
54
20 lit
10 lit5 lit1 lit
Water-based emulsion paint for interior use. It is recommended for use on new surfaces or surfaces already coated with water-based emulsion paint, where washing and soiling resistance are not required, such as in ceilings, storage rooms, staircases etc. It is characterized by great workability and surface coverage. Colors: White.
205 selected colors NCS pallet(minimum order quantity 9 lit).
2Coverage: Approx. 11 m per liter.
FLEX-PRIMER0214/6
Water-based emulsion paint for interior use
ISOMAT HYDROCHROMA9 lit
9 lit
3 lit
3 lit
4
4
44
44
110
110
White
NCS
Pallet
ISOMAT PROFESSIONALCLASSIC0213/6
Emulsion paint for interior use
Emulsion paint for interior use. It is recommended for use in areas, where frequent painting is required, such as in public buildings, hotels, hospitals, schools, entertainment venues etc. It is characterized by great workability and surface coverage, as well as high resistance to washing and ageing. Dries and can be recoated rapidly. Colors: White.
266 selected colors NCS pallet(minimum order quantity 10 lit).
2Coverage: Approx. 12 m per liter.
White10 lit
10 lit
3 lit
3 lit
4
4
44110
44110
NCS
Pallet
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
High quality emulsion paint for interior use. It is characterized by excellent surface coverage and workability as well as superb resistance to frequent washing and ageing. Provides strong adhesion to any kind of old or new substrate like plaster, concrete, gypsum boards etc. It gives a final surface with an excellent mat finish. Ammonia free.Colors: White.
305 selected colors NCS pallet (minimum order quantity 10 lit).
2Coverage: Approx. 12 m per liter. High quality emulsionpaint for interior use
0212/6
ISOMAT CLASSIC White
12 360
10 lit
0,75 lit43 lit
12 360
10 lit
1 lit4
44110
441103 lit
NCS
Pallet
NEW
ISOMAT ÂÁÔÇ & KITCHEN0229/6
High quality antimold emulsion paint
High quality antimold emulsion paint for indoor use. Drastically prevents mold and bacteria and is ideal for areas with high concentration of moisture and vapors, such as kitchens, bathrooms, basements, ceilings etc. It has strong adhesion to various substrates such as plaster, concrete, bricks, plaster wood etc. Ammonia free. It gives a uniform mat surface.Colors: White.
256 selected colors NCS pallet(minimum order quantity 10 lit).
Coverage: Approx. 12 2 m per liter.
White
12
44
360
10 lit
0,75 lit4 1103 lit
12
44
360
10 lit
1 lit4 1103 lit
NCS
Pallet
54
Repairing Materials & PaintsPutties, Paints & Protective MaterialsEMULSION PAINTS & PRIMERS
Çigh quality acrylic emulsion paint for exterior use. It is characterized by high water-repellency, excellent surface coverage and durability in harsh weather conditions and ageing. It is also vapor permeable allowing the building to breathe. Provides strong adhesion to any kind of old or new substrate like plaster, concrete, wood etc. It has an excellent workability and dries quickly. It givesa final surface with an excellent mat finish. Certified as cool paint Colors: White.
305 selected colors NCS pallet(minimum order quantity 10 lit).
2Coverage: Approx. 12 m per liter. Çigh quality acrylic emulsionpaint for exterior use
ISOMAT ACRYL0205/6
White
412 360
10 lit3 lit
0,75 lit
44110
44110
12 360
10 lit
1 lit43 lit
NCS
Pallet
FLEXCOAT0202/6 44
110
44110
10 lit3 lit
White
NCSPallet
10 lit3 lit 4High quality, elastic,
waterproofing paint
Elastic, waterproofing paint. Offers total water impermeability for the protection of walls against rain. It has high elasticity and crack bridging ability on surfaces that show hairline cracks. Suitable for painting and waterproofing walls, protecting of bituminous layers etc. For exterior and interior use. Colors: White.
266 selected colors NCS pallet(minimum order quantity 10 lit).
2Coverage: 8-12 m per liter.
4
ISOMAT SILICONE0230/6
NCS
Pallet
High quality new generation silicone paint for outdoor use. Characterized by high water and vapor permeability and excellent surface coverage. It shows strong adhesion to all types of new or old substrate, such as plaster, concrete, wood etc. It is ideal for areas with high humidity and extreme weather condition. It gives a uniform mat surface.
Coverage:
Colors: White. 180 selected colors NCS pallet(minimum order quantity 10 lit).
2Approx. 12 m per liter. High quality silicone paint
10 lit 443 lit 4 110
White10 lit 44
3 lit 4 110NEW
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
CL-MOLD1402/1
Antifungal cleaning fluid
Special cleaning fluid with antifungal activity. Cleans and disinfects surfaces from mold, bacteria and algae. It may however be a precaution to prevent the occurrence of microorganisms in high humidity situations. It is very effective for cleaning surfaces such as walls, ceilings, natural stone, brick, concrete, pools, etc. Furthermore, it can be used for decontamination of fungi and maintain sanitary conditions in places such as kitchens, restaurants, hotels, factories or warehouses food, commercial ovens, etc.Color: Blue.
12 3241 lit
NEW
Putties, Paints & Protective Materials4.3.3 ACRYLIC PAINTS & PRIMERS
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
55
SM-181407/6 4
12
3972
324
Special solvent used as a thinner of the primer PRIMER ACRYL-Sand to clean the tools after use.
Solvent forPRIMER ACRYL-S
20 lit5 lit
0,75 lit
* Packages marked with an asterisk are available 3 days after reception of order.
Silicone acrylic micronized water based primer. It offers excellent bonding, high penetration as well as durability to alkaline surfaces. Protects from rising moisture and salts stains and stabilizes weak substrates. It is recommended for use on new or old external porous surfaces that are going to be covered with paints or plasters. Thinning: Up to 50% with clean water. For highly absorbing substrates use it undiluted. Color: Light yellow
2Coverage: About 10-15 m per liter, per layer.
412
72
3960
324
20 lit1 0 lit
5 lit1 lit
0205/6
Silicone acrylic micronized water based primer
PRIMER ACRYL
0208/6
Acrylic, solvent based primer
Acrylic, solvent based primer. It offers excellent bonding and high penetration. Penetrates and anchors to the substrate and stabilizes weak substrates. It is recommended for use on new or old porous surfaces that are going to be covered with paints or plasters. It dries and is recoated rapidly. Thinning: Up to 100% with SM-18. For highly absorbing substrates use it undiluted. Color: Transparent
2Coverage: About 10-15 m per liter, per layer.
124 72
24
288
15 lit5 lit1 lit
PRIMER ACRYL-S
Putties, Paints & Protective MaterialsACRYLIC PAINTS & PRIMERS
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
FLEX-PRIMER0224/6
High quality acrylicwater-based primer
412
20 kg10 kg
5 kg1 kg
4472
39
324
Highly penetrative, polymer aqueous emulsion. Used in combination with the highly elastic waterproofing paint FLEXCOAT, it forms an ideal system for the waterproofing of walls. It is also the ideal primer for the acrylic pasty plaster MARMOCRYL. Color: White.
2Coverage: 5-10 m . The package of 10kg is available in round, plastic container that is useful for preparing colored primer. A colored primer is necessary when the substrates will be covered with acrylic plasters of base D & TR.
/kg
ISOMAT PROFESSIONALACRYL0208/6
Acrylic emulsion paint for exterior use. It is recommended for new or old surfaces that require frequent painting, such as public buildings, hotels, hospitals, schools as well as surfaces that are tarnished by graffiti. It is characterized by great workability and surface coverage, as well as high resistance to ageing. Dries and can be recoated rapidly. Colors: White.
266 selected colors NCS pallet (minimum orderquantity 10 lit).
2Coverage: Approx. 12 m per liter. Acrylic emulsion paint for exterior use
10 lit3 lit 4
White10 lit
3 lit 444
110
44110
NCS
Pallet
Putties, Paints & Protective Materials4.3.4 ENAMEL PAINTS & PRIMERS
56
Repairing Materials & Paints
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
EPOXYCOAT0405/1
8 kg 39(A+B) (A+B)
Putties, Paints & Protective Materials4.3.5 EPOXY PAINTS & PRIMERS
Two-component, solvent-based epoxy coating. Provides high resistance to abrasion, chemical effects and weather conditions.Color: RAL 9016 (white), RAL 7035 (light grey), RAL 7040(grey), RAL 1015 (beige). Other RAL colors by order (minimumquantity 120 kg).
Consumption:2200-300 g/m /layer.
Two-component epoxy coating
FLEX-PRIMER
0240/6
Premium quality waterenamel. Glossy surface
ISOLAC ÁQUAgloss
Excellent new generation water-based quality enamel paint for wood surfaces. Suitable for indoor and outdoor use. Characterized by high elasticity, excellent coverage and outstanding resistance to weathering and time. It offers strong adhesion and is suitable for repainting surfaces coated with paint or old water solvent enamels (enamel or oil paint). It gives a uniform glossy surface.Colors: White.
305 selected colors NCS pallet(minimum order quantity 2,5 lit).
Coverage: 2Approx. 12 m per liter.
FLEX-PRIMER
0240/6
Acrylic water basedprimer for woodensurfaces
ISOLAC RIMERPáqua
Acrylic water based primer for wooden surfaces. Suitable for indoor and outdoor use. It provides excellent adhesion to the substrate and great coverage. Used in new or old wood surfaces and is the ideal substrate for water-based enamel paint ISOLAC AQUA. It is odorless and environmentally and user friendly.Color: White.
Coverage: 2Approx. 12 m per liter.
412
140360
2,50 lit0,75 lit
412
140360
2,50 lit0,75 lit
2,50 lit0,75 lit 12
4 140360
NEW
NEW
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
NEW0241/6
FLEX-PRIMER
Premium quality waterenamel. Satin surface
ISOLAC ÁQUAsatin
Excellent new generation water-based quality enamel paint for wood surfaces. Suitable for indoor and outdoor use. Characterized by high elasticity, excellent coverage and outstanding resistance to weathering and aging. It offers strong adhesion and is suitable for repainting surfaces coated with paint or old water solvent enamels (enamel or oil paint). It gives a uniform satin surface.Colors: White.
305 selected colors NCS pallet(minimum order quantity 2,5 lit).
Coverage: 2Approx. 12 m per liter.
4
4
12
12
140
140
360
360
2,50 lit
2,50 lit
0,75 lit
0,75 lit
White
White
NCS
Pallet
NCS
Pallet
DUROFLOOR-BI0403/2
10 kg
4 kg
48
105
(A+B)
(A+B)
(A+B)
(A+B)
Two-component, colorless, solvent-based epoxy resin. Used asan impregnation on cement-based substrates to provide higherstability and abrasion resistance. Prevents dust creation onfloor surface. Also, used as a primer for EPOXYCOAT-VSF, EPOXYCOAT and EPOXYCOAT-S.
Consumption:2150-250 g/m /layer.
Two-component,colorless epoxyimpregnation
EPOXYCOAT-AC0413/1
39
726
8 kg
3 kg(A+B) (A+B) (A+B)
(A+B) (A+B)
Two-component, anticorrosive, solvent-based epoxy primerfor metal surfaces. Used alone as a final coat or as an anticorrosive primer of EPOXYCOAT-W, EPOXYCOAT-VSF,EPOXYCOAT and EPOXYCOAT-S.Color: RAL 3009 (redbrown), RAL 7040 (grey). Other RAL colors by order (minimum quantity 120 kg).
Consumption:2150-200 g/m /layer. Two-component
anticorrosive epoxy coating
EPOXYCOAT-VSF0406/1
3910 kg(A+B) (A+B)
Two-component, solvent-free epoxy coating. It offers high hardness and abrasion resistance. It is specially designed for aggressive chemical environments such as petroleum, high acids, alkalis etc.Color: RAL 7032 (sand grey). Other RAL colors by special order (minimum quantity 120 kg).
Consumption:2200-300 g/m /layer.
Two-component, epoxy coating for aggressive chemical environments
EPOXYCOAT-W0420/1
9 kg
3 kg(A+B)
(A+B)
Two-component, water based epoxy coating. Especially suitablefor priming on wet or fresh (age < 28 days) concrete surfaces. Provides high resistance to abrasion, chemical effects and weather conditions. Color: RAL 7035 (light grey), RAL 1015 (beige).Other RAL colors by order (minimum quantity 120 kg).
Consumption:2200-300 g/m /layer. Two-component, water-
based epoxy coating
39 (A+B)
57
Putties, Paints & Protective MaterialsEPOXY PAINTS & PRIMERS
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
EPOXYCOAT-S0406/1
9,6 kg 39
726 2 kg
(A+B)
(A+B)
(A+B)
(A+B)(A+B)
Two-component, solvent-based, epoxy coating. Provides high resistance to abrasion, chemical effects and weather conditions,as well as enhanced flexibility. Ideal for the painting of swimmingpools.Color: Blue of the pool, RAL 9003 (white). Other RAL colors by order (minimum quantity 144 kg).
Consumption:2200-300 g/m /layer. Two-component epoxy
coating suitable for swimming pools
7262 kg(A+B) (A+B) (A+B)
58
Repairing Materials & Paints
Putties, Paints & Protective Materials4.3.6 PROTECTIVE MATERIALS & VARNISHES
0228/1
NANOPRO-C Water-based emulsion with high penetrating ability, based on nano-molecular structure. Protects porous surfaces, from moisture and salt stains. Suitable for concrete, masonry, plaster, tile grouts, gypsum boards, chip boards, natural stones etc. For indoor and outdoor applications. Color: White (transparent after drying)
Consumption: 2100-200 /m , depending on the substrate's absorptivity.mlNano-impregnation for
protecting porous surfaces
412
3972
324
20 lit5 lit1 lit
Silicone-based solution without solvents for waterproofing
0207/1
PS-21(former PROTESIL-W)
418
24120288
20 lit3 lit1 lit0207/1
PS-20(former PROTESIL)
Silicone-based solution for waterproofing
412
392
72324
20 lit220 lit
5 lit1 lit
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Ready-to-use, silicone-based, transparent solution with solvents for waterproofing. It ensures extremely high water-repellence and long term protection. It can be applied on various surfaces (natural or synthetic stone, unpainted plaster, exposed masonry, decorative bricks, roof tiles, tiles, exposed concrete etc.) for their protection against rain effect. Also suitable for waterproofing tile joints.Color: Transparent
2Consumption: 0,2-0,4 lit/m .
Ready-to-use, silicone-based solution without solvents for waterproofing. It ensures extremely high water-repellence and long term protection. It is suitable for waterproofing of tile joints and the protection against rain effect of various surfaces like natural or synthetic stone, plaster, exposed masonry, decorative bricks, roof tiles, tiles, unpolished marble, exposed concrete etc.). It can be used even on slightly wet substrates.Color: White (transparent after drying)
2Consumption: 0,2-0,4 lit/m .
72SM-141407/1
45 litThinner for the epoxy coatings EPOXYCOAT, EPOXYCOAT-S and EPOXYCOAT-AC, and cleaner for tools used in applicationsof the above epoxy materials.
Special solvent for epoxy coatings
Putties, Paints & Protective MaterialsEPOXY PAINTS & PRIMERS
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
ISOMAT AG 770221/6 8 320
3 lit1 lit
96Brushable, paraffin-based emulsion. It protects surfaces from several kinds of stains, such as spray or paint graffiti, environmental impurities etc. Permitting easy cleaning of thesurface, without affecting their structure appearance. It providesgreat durability in time and weather effects. It can be applied onpainted or non-painted surfaces of concrete, plaster, stone,metal etc.
Consumption:250-100 ml/m , depending on the absorptivity of the surface.
Anti-graffiti protection emulsion
VS-10216/6
12 2884 lit1 lit
4 72
Acrylic stone varnish
Putties, Paints & Protective MaterialsPROTECTIVE MATERIALS & VARNISHES
59
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
0228/1
NANOPRO-M Water-based emulsion with highly penetrating ability based on nano-molecular structure. Protects unporous surfaces, from moisture and salt stains. Suitable for polished marbles, granites, tiles, porcelain etc. For indoor and outdoor applications. Color: White (transparent after drying)
Consumption: 250-70 /m , depending on the substrate's absorptivity.ml
Nano-impregnation for protecting marbles
0228/1
NANOPRO-L4
1272
324
3920 lit
5610 lit
5 lit1 lit
Nano-impregnation to protect surfaces against oils
412
3972
324
20 lit5 lit1 lit
2220 lit
Water-based emulsion with high penetrating ability, based on nano-molecular structure. Protects porous and slightly porous surfaces (marbles, granites etc) from oil stains, moisture and salt stains and prevents from fungi-mould growth. Suitable for concrete, masonry, plaster, tile grouts, gypsum boards, chip boards, natural stones etc. For indoor and outdoor applications. Color: White (transparent after drying)
Consumption: 250-100 /m , depending on the substrate's absorptivity.ml
Ready-to-use, transparent acrylic varnish, used to impregnate and brighten up natural stone (slate or sinter stone etc.) and artificial building materials (decorative bricks, roof tiles etc). VS-1 brings out the natural color of the material on which it is applied, protecting at the same time the surfaces from the influence of rainwater, weather effects and atmospheric pollution. It is applied on walls and floors, in indoor or outdoor areas.
2Consumption: 150-200 ml/m per layer, depending on the absorptivity of the surface.
4.4 Cleaning Agents
60
Repairing Materials & Paints
FD-CLEAN1403/1 4
3972
18 kg4 kg
Removes oil and grease residues from concrete floors by emulsification.
Oil/grease remover from concrete floors
SM-161407/1
5 lit 4 72
Special solvent for polyurethane coatings
Solvent used to dilute polyurethane coatings. Especially suitable for diluting the brushable polyurethane waterproofing membrane ISOFLEX-PU, when applied by spraying. It can also clean tools used for the application of ISOFLEX-PU and also tools from epoxy coatings residues. Additionally it can be used as a thinner for epoxy coatings. For polyurethane coatings SM-16 is added in a proportion up to 10% by weight.
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
CL-CLEAN1402/1 4
12
3972
324
20 kg5 kg1 kg
Tile and natural stone cleaner. Removes lime residues, plaster, cement etc.
Tile & natural stone cleaner
SM-121401/1
4 725 litThinner for epoxy products and cleaner of tools used in epoxysystem applications. Used in combination with Isomat AG 77to clean surfaces from graffiti.
Special solvent for epoxy systems
CL-MOLD1402/1
Antifungal cleaning fluid
Special cleaning fluid with antifungal activity. Cleans and disinfects surfaces from mold, bacteria and algae. It may however be a precaution to prevent the occurrence of microorganisms in high humidity situations. It is very effective for cleaning surfaces such as walls, ceilings, natural stone, brick, concrete, pools, etc. Furthermore, it can be used for decontamination of fungi and maintain sanitary conditions in places such as kitchens, restaurants, hotels, factories or warehouses food, commercial ovens, etc.Color: Blue.
12 3241 lit
NEW
Cleaning Agents
61
CL-INDUSTRY1402/1
CL-EPOXY FLOOR1402/1
394 72
12 324
*20 lit*1000 lit
5 lit
0,75 lit
394 72
12 324
*20 lit*1000 lit
5 lit
0,75 lit
Liquid cleaner for industrial areas.It is used to clean stains of oils, grease and other intense stains from tiles, concrete, walls, epoxy floorings, metallic surfaces etc. Due to its effective formula it is ideal for cleaning stains in industrial areas.
Consumption:21 lit/15-20m .
Special cleaner for industrial floorings
Liquid cleaner for epoxy floorings. It is used to clean stains of oils, grease and other intense stains from epoxy floorings.
Consumption: 21 lit/15-20m .
Special cleaner for epoxy floorings
* Packages marked with an asterisk are available by order.
CL-MARBLE1402/1
394 72
12 324
*20 lit5 lit
0,75 lit
Liquid cleaner for marbles and granites.It is used to clean stains of coffee, wine, oils, nicotine, ash and other stains from marbles and granites. It does not contain any acid and does not affect the sensitive surfaces. It is applied undiluted on the stained surface and is left to act until the stain is disappeared. It usually takes 24 hours until a stain is removed completely. For difficult stains repeat the same process.
Consumption: 21 lit/15-20m .
Special cleaner for marbles and granites
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
CL-UNIVERSAL1402/1
394 72
12 324
*20 lit5 lit
0,75 lit
CL-GROUT1402/1
394 72
12 324
*20 lit5 lit
0,75 lit
General use liquid cleaner. It is used to remove stains of coffee, wine, oils, grease and other similar stains from tiles, marbles, granites, formicas etc.
Consumption: 21 lit/15-20m .
General use cleaner
Special cleaner for tile grouts
Liquid cleaner for tile grouts. It is used to clean tile grouts from salts, mould, stains of coffee, wine etc.
Consumption: 21 lit/15-20m .
4.5 Elastic Joint Sealants
62
Repairing Materials & Paints
DOMOSIL-S0622/6
Mildew-resistant silicone sealant
25 1.125280 mlTransparent
25 1.125280 mlWhite
DOMOSIL-MICRO0622/6
DOMOSIL-POOL0622/6
12 900280 mlTransparent
12 900280 mlWhite
25 1.125280 mlTransparent
High performance, anti-mould silicone sealant with built-in antibacterial protection technology. Remains color
stable even after 10 years. Appropriate for sealing joints of 3-40mm wide in non-porous materials such as glass, aluminium, porcelain and non-porous ceramics. It is applied in high humidity areas such as kitchens, bathrooms, etc. It is not recommended for use in aquariums and cannot be overpainted.Color: Transparent, white.Consumption: Joint 10mm x 10mm: 1 cartridge/3 m of joint length. Joint 5mm x 5mm: 1 cartridge/12 m of joint length.
®Microban
Anti-mould silicone sealant with built in
technology®Microban
Silicone sealant for permanent water immersion
Silicone sealant resistant to permanent water immersion such as swimming pools, aquariums etc. Appropriate for sealing vertical or horizontal joints 3-40mm wide, for indoor and outdoor applications. It has very good adhesion on surfaces such as glass, porcelain, aluminium, ceramics etc. Suitable for sealing joints on boats, glass-structures etc. It cannot be overpainted. Color: Transparent.Consumption: Joint 10mm x 10mm: 1 cartridge/3 m of joint length. Joint 5mm x 5mm: 1 cartridge/12 m of joint length.
High performance, mildew resistant silicone sealant for sealing joints 3 to 40 mm wide, on surfaces of non-porous materials such as glass, aluminum, porcelain (e.g. tiles), ceramic etc. Also suitable for applications in high moisture sanitary areas such as bathrooms and kitchens, as well as in hospital areas, laboratories etc. Prevents fungi development that creates stains and black spots. It is not recommended for aquariums since it contains fungicide. It cannot be overpainted. Color: Transparent, white.Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
DOMOSIL0623/6
High performance, general-purpose silicone sealant for sealing joints 3 to 40 mm wide, on surfaces of non-porous materials such as glass, aluminum, porcelain (e.g. tiles), ceramic etc.It cannot be overpainted.Color: Transparent, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
General-purpose silicone sealant
25 1.125280 mlTransparent
25 1.125280 mlWhite
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
ISOMASTIC-A0601/6 25 1.125280 ml
WhiteElastoplastic sealant without solvents based on acrylic polymers. Suitable for sealing work joints, thin expansion joints or plaster cracks in interior or exterior areas. Also suitable for slightly wet surfaces. Easily paintable.Color: White, grey.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
Elastoplastic acrylic sealant
0626/6
Polyurethane adhesiveand sealant
FLEX PU-50 S
One-component, polyurethane sealing mastic with solvents. Ideal for sealing joints where high elasticity is required. Suitable for joints 5-50mm wide in concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles etc. For outdoor and indoor applications.Color: Grey, white.
Consumption: Joint 10mm x 10mm: 1 cartridge/3 m of joint length.Joint 5mm x 5mm: 1 cartridge/12 m of joint length.
One-component, polyurethane sealing and adhesive mastic with solvents. Exceptional adhesion to all building materials, e.g. concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles etc. Suitable for joints 5-30mm wide. For outdoor and indoor applications.Color: Grey, white.
Consumption:Joint 10mm x 10mm: 1 cartridge/3 m of joint length.Joint 5mm x 5mm: 1 cartridge/12 m of joint length.
0626/6
FLEX PU-30 S
Polyurethane sealant
75025 1500310 ml15600 ml
Grey
75025 1500310 ml15600 ml
White
75025 1500310 ml15600 ml
Grey
75025 1500310 ml15600 ml
White
NEW
Two-component joint sealant based on polyurethane resins. Ideal for sealing horizontal and vertical concrete joints in floors and structures like reservoirs, canals etc.Available in two types: FLEX PU-2KV: For vertical surfaces. FLEX PU-2KH: For horizontal surfaces Color: Grey
Consumption: 1,45 kg/lit of joint volume
0633/6
FLEX PU-2K
2-component polyurethane joint sealant
5 kg 27(A)(A+B) 18(B)
4(A) 6(B)
NEW
NEW
63
Elastic Joint Sealants
FLEX PU-400626/6
Polyurethane adhesiveand sealant
1.000
1.000
12 1.560310 ml
12 1.560310 ml
20
20
600 ml
600 ml
Grey
White
1.00012 1.560310 ml20600 ml
Brown
One-component, solvent-free polyurethane sealing and adhesive mastic. Exceptional adhesion to all building materials, e.g. concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor and indoor applications.Color: White, grey, .
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
brown
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
FLEX PU-200627/6
12 1.5601.000
1.000
310 ml20
20
600 ml
600 ml
Grey
White
One-component, solvent-free polyurethane sealing mastic. Ideal for sealing joints where high elasticity is required. Suitable for joints in concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor and indoor applications.Color: Grey, white.
Consumption:Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
Polyurethane construction joint sealant
64
Repairing Materials & Paints
Elastic Joint SealantsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
TIXOPHALTE0624/6 24 1.440310 ml
BlackReady-to-use, cold-applied elastoplastic adhesive bituminous mastic sealant. Possesses superior permanent flexibility and excellent adhesion to all kinds of materials under various conditions, even underwater.Color: Black.
Consumption:Approx.1,4 kg/lit of joint volume.
Elastoplastic & adhesive bituminous mastic sealant
ISOMAT PU FOAM0632/6
12 1.020750 mlOne-component, self-expanding polyurethane foam. It has an excellent adhesion on wood, cement, stone, metal etc. It is used for fixing door and window frames, filling holes, sealing voids on roofs and insulating materials etc.
One-component moisture cure polyurethane foam
ISOMAT PU FOAMPROFESSIONAL0632/6
12 1.020750 mlMoisture curing, one-component, low expansion polyurethane foam. It offers excellent bond strength to most materials (wood, plaster, concrete, stone, metal, etc.), heat and noise insulation, resistance to moisture and ageing. It is used as an aid to mechanically fixing door and window frames, filling holes, gaps, cracks and cavities to insulating materials, filling gaps around pipes going through walls etc.
One-component, low expansion, polyurethane foam
NEW
ELASTOTAN0607/6 15600 ml
25 1.125280 ml
White15600 ml25 1.125280 ml
GreyElastomeric sealing and adhesive mastic with exceptional adhesion to all building materials e.g. glass, aluminium, wood, PVC etc. It features high mechanical strength and resistance to ageing and weather conditions. Suitable for sealing joints 3 to 50 mm wide.Color: White, grey.
Elastomeric adhesive mastic sealant
Consumption:Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
Elastomeric sealing and adhesive mastic with excellent bonding to any kind of building material such as glass, aluminium, wood, PVC etc. It features high mechanical strength and great endurance to ageing. It is also suitable for slightly wet substrates. It is used for strong, elastic adhesions. Color: Grey,
Consumption: Indicative consumption: 1 cartridge /10 linear meters.
redbrown.
0629/6
FLEX MS-45
Elastomeric adhesive and sealant
25 1.125280 mlGrey
25 1.125280 mlRedbrown
65
4.6 Bituminous Repairing MaterialsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
ISOMAC1018/6
20 kg 365 kg 120
Bituminous mastic
Bituminous mastic with excellent adhesion and elasticity. It can be cold-applied with a smooth trowel. Suitable for sealing joints on horizontal and vertical surfaces, for sealing-bridging hair cracks and for flashing (sealing) difficult points during the fixing of bituminous membranes (drainpipes, joints or junctions in parapets etc). Also used for repairing in waterproofing layers formed by bituminous membranes.Color: Black.
Consumption: 1,2-1,3 kg/lit.
ASPHALTOS1010/6
Ready-to-use, cold asphalt mixture for patching small potholes on asphalt or concrete pavements. It enables high flexibility, without being cracked due to contraction-expansion effects. It has superb adhesion to the substrate and features high resistance to weather conditions and aging. Color: Black.
Consumption:2 Approx. 21 kg/m /cm of layer thickness.Cold asphalt mix for
instant road repair
25 kg 36
66
Repairing Materials & Paints
5. Premixed Plasters
5.5 Plastering Reinforcement Materials
5.2 Acrylic Plasters
5.1 Cement-Based Plasters
5.4 Plaster Primers
5.3 Silicone lastersP
67
MARMOCRET-BASE0341/1
MARMOCRET-BOND0340/1
54
54
25 kg
25 kg
5.1 Cement-Based Plasters
68
5. Premixed Plasters
Pre-mixed, cement-based plaster, used to create the bondingspatterdash of the subsequent plaster layer. Suitable for creatingthe bonding spatterdash (rough cast) on concrete, masonry,thermo-insulation boards etc. in order to enhance the adhesionof the “base layer” of plaster that follows. Needs only the additionof water. Ideal for application with plastering machine. It classifiedas type CS IV, W1 mortar according to EN 998-1.Color: Grey.
Consu ption:2Approx. 5 kg/m
m.
Mortar for bondingspatterdash of plaster
Needs only the addition of water.mortar
Pre-mixed, cement-based plaster, used to create the “base layer”(brown coat) of plaster. It constitutes the ideal substrate of thecolored, water-repellent finish coat plasters application withplastering machine. It is classified as type CS II, W0 according to EN 998-1.Color: Grey.
Consumption:2Approx. 13,5 kg/m /cm of plaster thickness.
Pre-mixed plasterfor the base layers
MARMOCRET Fine0311/1
5425 kg
MARMOCRET Decor0312/1
25 kg 54
Pre-mixed, colored, water-repellent plaster for smooth final surface
Decorative, water-repellent finish coat plaster, for the preparation of rough-textured surfaces. Needs only water. It is classified as type CS II, W1 mortar according to AI 998-1.Color: White. Other colors by order (minimum quantity 6.000 kg).
Consumption:2Approx. 1,5 kg/m /mm of plaster thickness.
Recommended thickness: 2,5-3,5 mm. Pre-mixed, colored, water-repellent plaster, for rough-textured final surface
MARMOCRET 10306/1
48
4830 kg
30 kg
Grey
White
One layer plaster
Pre-mixed, one layer plaster. Applied on maximum thickness of 3 cm per layer. Its usage requires the application of a bonding spatterdash (rough cast).Is mixed only with water. The plaster is applied with a plastering machine or by hand, using a float or a trowel. It is classified as type CS II, W1 mortar according to EN 998-1.Color: Grey, white.
Consumption: 2Approx. 15 kg/m /cm.
Decorative, water-repellent finish coat plaster, for the preparation of smooth surfaces. Needs only water. It is classified as type CS II, W1 mortar according to EN 998-1.Color: White.Other colors by order (minimum quantity 6.000 kg).
Consumption:2Approx. 1,4 kg/m /mm of plaster thickness.
Recommended thickness: 2-5 mm.
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Cement-Based Plasters
69
MARMOCRET Decor PLUS 0337/1 54
54
54
25 kg
25 kg
25 kg
MARMOCRET
Pallet
colorsOther
WhiteDecorative, polymer-modified, water-repellent finish-coat plaster, white or colored for rough-textured final surface. It is applied on substrates with special demands in elasticity and adhesion. Needs only water. In combination with the fibre-reinforced adhesive Isomat AK-THERMO it is used as a system for application on facade thermo-insulation boards.It is classified as type CS II, W2 mortar according to EN 998-1. Color: White and 7 fixed colors (MARMOCRET pallet). Other colors by order (minimum quantity 6.000 kg).
2Consumption: Approx. 1,4 kg/m /mm of plaster thickness.Recommended thickness: 2,5-3,5 mm.
Polymer-modified, colored, water-repellent plaster, for rough-textured final surface
MARMOCRET-S0304/1
6015 kgMortar-binder for preparation of white, water-repellent plasters. To be mixed with marble sand and water.Color: White.
Consumption:21 bag/10 m /5 mm.
Mortar-binder for the preparation of white water-repellent plasters
0341/1MARMOCRET GRAFFIATO
5425 kgPolymer-modified, water-repellent, cement-based finish coat plaster. It consists of aggregate with a special particle size granulation, to form an extra coarse-textured decorative surface. It is applied on substrates with special demands in elasticity and adhesion. In combination with the fibre-reinforced adhesive Isomat AK-THERMO it is used as a system for application on thermo-insulation boards. It is classified as type CS III, W2 mortar according to EN 998-1. Color: White.Consumption:
2Approx. 1,5 kg/m /mm of plaster thickness.Recommended thickness: 3-4 mm.
Polymer-modified, water-repellent plaster, for rough-textured final surface.
MARMOCRET Fine PLUS0336/1 54
54
54
25 kg
25 kg
25 kg
White
MARMOCRET
Pallet
colorsOther
Polymer-modified, colored, water-repellent plaster, for smooth final surface
MARMOCRET-SP0304/1
5425 kgRestoration plaster, particularly durable to salts and moisture. Suitable for the restoration of renders in buildings located near to the sea or in areas exposed to rising damp. Appropriate also for areas with high humidity such as bathrooms, basements etc. For indoor and outdoor applications.Color: white.
Consumption:2Approximately 10 kg/m /cm.Restoration plaster for
renovation
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Decorative, polymer-modified, water-repellent finish-coat plaster, white or colored for smooth final surface. It is applied on substrates with special demands in elasticity and adhesion. Needs only water. In combination with the fibre-reinforced adhesive Isomat AK-THERMO it is used as a system for application on facade thermo-insulation boards. It is classified as type CS II, W2 mortar according to EN 998-1.Color: White and 7 fixed colors (MARMOCRET pallet).Other colors by order (minimum quantity 6.000 kg).
2Consumption: Approx. 1,4 kg/m /mm of plaster thickness.Recommended thickness: 2-3 mm.
70
5. Premixed Plasters
Cement-Based Plasters
ISOMAT ST-10224/1
Special impregnation for the restoration of salt damaged masonry. It transforms water soluble salts such as chlorides and sulphates into insoluble compounds. It is used for the restoration of salt damaged masonry in combination with the renovation plaster MARMOCRET-SP.
Consumption:20,4-0,5 kg/m .
Impregnation of salt damaged masonry
20 kg4
39725 kg
12 3241 kg
UNICRET0309/1
54
5425 kg
25 kg
Grey
White
Mortar suitable for plastering and masonry works.It is classified as type GP CS II W0 mortar according to EN 998-1.Color: Grey, white.
Consumption:2Approx. 15,5 kg/m /cm.
Mortar for plastering and masonry
UNICRET-FAST0325/1 4
54160
25 kg5 kg
Fast-setting white mortar, ideal for quick plaster repairs in old and new constructions. Replaces the use of gypsum in respective applications.It is classified as type GP CS I W0 mortar according to EN 998-1.Color: White.
Consumption:2Approx. 14,7 kg/m /cm.
Fast-setting, white repairing mortar
0576/1
ISOMAT MT 80
Pre-mixed, cement-based mortar for masonry
Pre-mixed, cement-based mortar for masonry. It is used only with the addition of water. It simplifies and accelerates the applications. Used on various types of building materials such as bricks, blocks, aerated concrete blocks, stone, etc.It is classified as type M5 mortar for masonry according to EN 998-2. Color: Grey.
Consumption:Indicative consumption for bricks of dimensions
26x9x12 cm: 20 kg/m masonry.
5425 kg9015 kg
ISOMAT MT-80 S0576/1
5425 kgPre-mixed, cement-based mortar for masonry. Due to its special formula it prevents the formation of salts on masonries which are exposed to the weather conditions. It is used on various types of building materials such as bricks, blocks, stone, etc. It is classified as type M5 mortar for masonry according to EN 998-2.Color: Grey.
Consumption: Indicative consumption for bricks of dimensions 26x9x12 cm: 20 kg/m of masonry.
Pre-mixed, cement-based mortar for exposed masonry
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
71
MARMOCRYL Decor2 mm3 mm
0349/6
0350/6
Acrylic, ready-to-use, colored, water-repellent plaster for rough-texturedfinal surface
5.2 Acrylic Plasters
MARMOCRYL Fine
Acrylic, ready-to-use, colored, water-repellent plaster for smooth final surface
1 mm0345/6
1,5 mm2,0 mm
0346/6
0347/6
Acrylic, ready-to-use, white or colored, water-repellent coat plaster. Suitable for creating a smooth surface. Aliminates the need of facade painting. Due to its high elasticity and its excellent bonding to the surface MARMOCRYL Fine is also an ideal final layer for external thermo-insulated facades.Color: White and 305 selected (NCS pallet).Other colors by order (minimum quantity 150 kg).Recommended thickness: MARMOCRYL Fine 1 mm: 1 mm.MARMOCRYL Fine 1,5 mm: 1,5 mm.MARMOCRYL Fine 2 mm: 2 mm.
2Consumption: Approx. 1,8 kg/m /mm
The colors of MARMOCRYL Fine may present small differences from those of FLEXCOAT and ISOMAT-ACRYL because of the plaster's texture.
*The package of 5 kg is available only in MARMOCRYL Fine 1,5mm.
NCS
Pallet
NCS
Pallet
25 kg 24
24
White
25 kg
NCSPallet
Acrylic, ready-to-use, white or colored, water-repellent finish coat plaster. Suitable for creating a rough-textured decorative surface. Eliminates the need for painting. Due to its high elasticity and its excellent bonding to the surface MARMOCRYL Decor is also an ideal final layer for external thermo-insulated facades.Color: White and 305 selected (NCS pallet).Other colors by order (minimum quantity 150 kg).
Recommended thickness: MARMOCRYL Decor 2 mm: 2 mm.MARMOCRYL Decor 3 mm: 3 mm.
Consumption:2Approx. 1,6 kg/m /mm
The colors of MARMOCRYL Decor may present small differences from those of FLEXCOAT and ISOMAT-ACRYL because of the plaster's texture.
MARMOCRYL GRANIT0372/6
25 kg 24Acrylic, pasty coating with a granite-like finish. It is used as a finish coat to create a colored , water-repellent, coarse-textured finish surface. It can be applied on all kinds of building materials such as plaster, concrete, cement boards, gypsum boards etc. Ideal as a final coating for the external thermal insulation composite systems in facades.Color: 24 selected (MARMOCRYL GRANIT pallet).Consumption:
2Approximately 1,8 kg/m /mm. Recommended application thickness: Approx. 2mm.
Acrylic, pasty coating with a granite-like finish
COLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
25 kg
25 kg
*5 kg
24
24
75
White
*5 kg 75White
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
G 710,G 760,G 820,G 870G 930G 950G 660
G 160, G 980G 490
G 510, G 600G 130,G 150,G 220
G 550G 440, G 500
G 530G 300
COLOR PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.
72
Premixed Plasters
2 mm3 mm
0364/6
0365/6
MARMOCRYLSILICONE Decor
Ready-to-use, water repellent, colored silicone plaster. Rough-textured finish
Ready-to-use, white or colored, silicone plaster. Marmocryl silicone is characterized by its extreme hydrophobia and has excellent vapor permeability. It is suitable for creating a rough textured surface. Eliminates the need of facade painting. Due to its high elasticity and its excellent bonding to the surface is also an ideal final layer for external thermo-insulated facades. Color: White and 305 selected (NCS pallet).Other colors by order (minimum quantity 150 kg).
Recommended thickness: MARMOCRYL SILICONE Decor 2 mm: .MARMOCRYL SILICONE Decor 3 mm: 3 mm.
2Consumption: Approx. 1,6 kg/m /mm
The colors of MARMOCRYL SILICONE Decor may present small differences from those of FLEXCOAT and ISOMAT-ACRYLbecause of the plaster's texture.
2 mm
5.3 Silicone Plasters
MARMOCRYLSILICONE Fine
1 mm0360/6
1,5 mm2,0 mm
0361/6
0362/6
Ready-to-use, water repellent, colored silicone plaster. Smooth finish
Ready-to-use, white or colored, silicone plaster. Marmocryl silicone is characterized by its extreme hydrophobia and has excellent vapor permeability. It is suitable for creating a smooth surface. Eliminates the need of facade painting. Due to its high elasticity and its excellent bonding to the surface is also an ideal final layer for external thermo-insulated facades.Color: White and 305 selected (NCS pallet).Other colors by order (minimum quantity 150 kg).
Recommended thickness: MARMOCRYL SILICONE Fine 1 mm: .MARMOCRYL SILICONE Fine 1,5 mm: 1,5 mm.MARMOCRYL SILICONE Fine 2 mm: 2 mm.
2Consumption: Approx. 1,8 kg/m /mm
The colors of MARMOCRYL SILICONE Fine may present small differences from those of FLEXCOAT and ISOMAT-ACRYL because of the plaster's texture.
1 mm
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/E.-PAL.PS/BOX
25 kg 24
24
White
25 kg
NCSPallet
25 kg 24
24
White
25 kg
NCSPallet
Acrylic Plasters
MARMOCRYL GRANIT0372/6
25 kg 24G 380G 330G 270G 110
UNI-PRIMER0209/1 4
12
3972
324
20 kg5 kg1 kg
Ready-to-use acrylic water-based primer. Stabilizes weak, loose or crumbling plasters.Color: White. Consumption:
2100-200 g/m .
Acrylic water-based primer
73
SILICONE-PRIMER0359/6
FLEX-PRIMER0224/6
High quality acrylicwater-based primer
Adhesion primer for silicone plasters
Silicone polymer aqueous emulsion which stabilizes porous substrates and ensures the proper adhesion of silicone plasters MARMOCRYL SILICONE.Color: White.
2Coverage: 5-10 m . The package of 10kg is available in round, plastic container that is useful for preparing colored primer. A colored primer is necessary when the substrates will be covered with silicone plasters of base D & TR.
/kg
PL-PRIMER0119/1 4
3972
PL-BOND0333/1 110
24
20 kg5 kg
20 kg5 kg
5.4 Plaster Primers
Concentrated plaster primer-dehydration barrier. It is applied upon dilution with water on surfaces that will be subsequentlyplastered. It prevents fast absorption of plaster's water by thesubstrate. Suitable for aerated concrete surfaces.Color: Red.
Consumption:240-100 g/m .
Plaster primer - Dehydration barrier
Adhesion primer consisting of synthetic resins and quartz sand.Used for priming smooth or non-absorptive surfaces, instead ofspatterdash (rough cast), in order to increase the adhesion of the subsequent plaster. Ideal substrate for gypsum plasters. Suitable for indoor and outdoor use.
Consumption:2300-350 g/m , depending on layer thickness. Plaster adhesion
primer
412
20 kg10 kg
5 kg1 kg
4472
39
324
4
394472
20 kg10 kg
5 kg
Highly penetrative, polymer aqueous emulsion. Used in combination with the highly elastic waterproofing paint FLEXCOAT, it forms an ideal system for the waterproofing of walls. It is also the ideal primer for the acrylic pasty plaster MARMOCRYL.Color: White.
2Coverage: 5-10 m . The package of 10kg is available in round, plastic container that is useful for preparing colored primer. A colored primer is necessary when the substrates will be covered with acrylic plasters of base D & TR.
/kg
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
74
Premixed Plasters
5.5 Plastering Reinforcement Materials
1207/1
30
30
30
30
30
160,25m x 50m 2(12,5 m )
1m x 50m 2(50 m )
1m x 50m
1m x 50m
2(50 m )
2(50 m )
1m x 50m 2(50 m )
1m x 50m 2(50 m )
RollFIBERGLASS MESHFOR PLASTER
PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/PAL.PS/BOX
High-strength fibreglass mesh for reinforcing plasters or cement mortars that are subject to cracking.
2White color, 145 g/m .Mesh: 5,0 mm x 5,0 mm. Ideal for facade thermo-insulation works.
2White color, 160 g/m .Mesh: 4,0 mm x 4,0 mm. Ideal for facade thermo-insulation works.
2White color, 90 g/m .Mesh: 5,0 mm x 5,0 mm.
2Blue color, 120 g/m .Mesh: 10,0 mm x 10,0 mm.
2Blue color, 90 g/m .Mesh: 10,0 mm x 10,0 mm.
2Blue color, 90 g/m .Mesh: 10,0 mm x 10,0 mm.
1207/124
100
FIBERGLASS TAPE90 m
20 m
Roll
Roll
Self-sticking fibreglass tape for reinforcing gypsum boards, cement sheets etc. Also used for bridging cracks in other repairing works.Tape’s width: 5 cm.
Self-sticking fibreglass tape
6. ingsIndustrial Floor
6.1 Cement-Based Floorings
6.2 Cement-Based Floorings
Impregnations for
75
6.3 Epoxy-Cement FlooringsBased
6.4
Epoxy-Based& Polyurethane-Based Floorings
EXTRA-TOP0327/1 5425 kg
Grey
5425 kg
Ochre
5425 kgRedbrown
5425 kg
Light Blue
6.1 Cement-Based Floorings
76
6. ingsIndustrial Floor
Surface hardener for cement-based floors
FLOWCRET 1-100307/1
5425 kgSelf-leveling, polymer-modified cementitious screed, forsmoothing and leveling concrete or mortar floors, before laying finishing materials like carpet, parquet layers, tiles etc. Applied at a thickness of 1-10 mm per layer.Color: Grey.
Consumption:2Approx. 1,65 kg/m /mm.
Self-leveling, polymer-modified cementitious screed
FLOWCRET 1-10 EXPRESS0307/1
Fast-setting, self leveling, polymer-modified cementitious screed, used for smoothing and leveling concrete or mortar floors, before laying finishing materials like ceramic tiles, carpets, parquet, vinyl tiles etc. It can be used in a thickness of 1-10mm. Ideal for quick repairs, as it can be walkable after 3 hours. Also, it can be covered after 24 hours. Color: Grey, White.
Consumption:2 Approx. 1,65 kg /m /mm of layer thickness.
Fast-setting, self-leveling, polymer-modified cementi-tious screed
EXPRESSFLOWCRET 3-300307/1
5425 kgFast-setting, self-leveling, polymer-modified compound, used for the smoothing and leveling of surfaces. It can be applied at a thickness of 3-30mm.Ideal before installing floor coverings such as tiles, carpet, plastic or wooden floor, marbles, natural stones etc. Suitable also for floors with underfloor heating.Color: Grey
Consumption: 2Approx. 1,65 kg/m /mm of layer thickness.
Fast-setting, self-leveling compound
EXTRA-TOP CR0327/1
Hardening agent forindustrial floors withcorundum
5425 kgHardening agent for industrial floors with corundum, quartz aggregates and special admixtures. Suitable for floors withhigh demands in mechanical strength such as industrial floor, basements, auto repair shops, machine shops, parking lots, warehouses, loading-unloading areas, isles etc. Color: Grey.
Consumption: 3-5 kg/ .2m
54
54
25 kgGrey
25 kgWhite
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Surface hardener for cement-based floors with quartz aggregates and special admixtures. Suitable for industrial floors, basements, auto repair shops, machine shops, parking lots, warehouses, loading-unloading areas etc.Color: Grey, ochre, redbrown, light blue.
Consumption:23-5 kg/m .
DUROCRET-DECO0310/1
5425 kgPolymer-modified, fiber-reinforced, cement mortar. It provides excellent adhesion to the substrate, waterproofing and abrasion resistance. For indoor and outdoor use in a variety of applications, on floors and walls, wherever aesthetic intervention is needed (e.g. Cycladic architecture) in homes, shops, hotels etc. Suitable for special structures such as built-in beds, built sanitary ware (sinks, bathtubs, showers etc.)Colors: white, grey, light grey, mocha, crocus, light ochre.
Consumption: Approx. 1,5 kg/ /mm.2m
Cement screed for surface finishing on floors and walls
White
Grey
Light Grey
Light Ochre
Mocha
Crocus
NEW
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
77
6.2 Impregnations for Cement-Based Floorings
ISOMAT BI-1000224/1
Concrete hardening and dustproofing impregnation
Water-based polymer emulsion with high penetration ability. When applied on concrete floors or cement screeds, it hardens and dustproofs the surface. Suitable for indoor and outdoor use. Color: White (transparent after drying)
Consumption: 2100-200 g/m , depending on the substrate's absorption.
412
3972
324
20 kg5 kg1 kg
Cement-Based Floorings
SCREED-1000328/6
5425 kgCementitious screed for filling and leveling floors to be coveredwith tiles, marble, parquet etc., as well as for forming slopes on terraces. It replaces non-reinforced concrete or gas-concrete. Applied at a thickness of up to 10 cm per layer.Color: Grey.
Consumption:2Approx. 14 kg/m /cm.
Floor leveling cementious screed
SCREED-SX0328/6
5420 kg
Rapid setting mortar-binder for the preparation of floor screeds
Rapid setting, reinforced mortar that replaces the cement (binder) of floor screeds. It consists of special cements and special additives. After mixing with sand and water it is prepared a rapid setting cement mortar with high strength. Suitable for filling and leveling of floors, before laying tiles, marbles, natural stones, parquet, vinyl tiles, floors with underfloor heating system etc. Also for preparing cement mortar grade for terraces and outdoor areas. Color: Grey.
2Consumption: Approx. 2,0-3,5 kg/m /cm.
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
78
Industrial Floorings
DUROFLOOR 110400/2
Two-component epoxy flooring
39
39
16 kg
250 kg
16 kg
(A+B)
(A+B)
(A+B)
(A+B)
(A+B)
colorsOther
6.4 Epoxy-Based & Polyurethane-Based Floorings
DUROFLOOR0401/2
39
39
9 kg
9 kg
(A+B)
(A+B)
(A+B)
(A+B)
colorsOther
Two-component, self-leveling epoxy flooring
DUROFLOOR-BI0403/2
4 kg
10 kg
105
48
(A+B)
(A+B)
(A+B)
(A+B)
Two-component,colorless epoxyimpregnation
Two-component, colorless, solvent-based epoxy resin. Used asan impregnation on cement-based substrates to provide higherstability and abrasion resistance. Prevents dust creation onfloor surface. Also, used as a primer for EPOXYCOAT-VSF, EPOXYCOAT and EPOXYCOAT-S.
Consumption:2150-250 g/m /layer.
Impregnations for Cement-Based Floorings
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
6.3 Epoxy-Cement FlooringsBased
DUROFLOOR-CMT0422/2
Three-component,self-levelingepoxy-cement flooring
25 kg(A+B+C)
Three-component, epoxy-cement, self-leveling flooring, solvent-free. It is used for repairing and levelling of cement-based floors that are going to be covered with DUROFLOOR epoxy systems, polyurethane coatings, plastic flooring, wooden flooring etc. It is also applied in cases where the floor is relatively fresh or is stressed by rising damp in order to create the proper substrate for the application of epoxy layer, to avoid problems of detachment. Color (A+B+C): Grey.
Consumption: Approx. 2,1 kg/ /mm.2m
NEW
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
Two-component, solvent-free, self-leveling epoxy flooring. After mixing the two components, Q35 quartz sand is added inside in proportions DUROFLOOR : quartz sand = 1:2 by weight.Color: RAL 7032 (sand grey), RAL 7035 (light grey), RAL 7040 (grey), RAL 3009 (redbrown), RAL 1015 (beige), RAL 1013 (white-beige), RAL 6021 (light green), RAL 5024 (pastel blue). Other RAL colors by order (minimum quantity 144 kg).Consumption:
2DUROFLOOR: 0,6 kg/m /mm. 2Quartz sand: 1,2 kg/m /mm (mix. ratio:DUROFLOOR:sand=1:2).
Two-component, solvent-free epoxy flooring. With the addition of quartz sand M32 in proportions 1:1 by weight, it can be used as a self-leveling epoxy flooring. Also, without adding quartz sand, it can be applied as a brushable epoxy coating. Color: RAL 7032 (sand grey), RAL 7040 (grey). Other RAL colors by order (minimum quantity 160 kg). Consumption:
2As a self-leveling epoxy flooring: 0,85 kg/m /mm. 2Consumption of quartz sand: 0,85 kg/m /mm.
2As a brushable epoxy coating: 250-300 g/m /layer.
DUROFLOOR-CV0410/2
398 kg(A+B) (A+B)
Two-component, conductible epoxy varnish. To be used before DUROFLOOR-C.Color: Black.
Consumption:2Approx. 200 g/m .
Two-component,conductible epoxy varnish
DUROFLOOR-C0409/2
39
39
10 kg(A+B) (A+B)
(A+B)(A+B)10 kgcolorsOther
Two-component, solvent-free, self-leveling, conductible epoxy flooring, used to eliminate static electricity problems.Color: RAL 7040 (grey), RAL 1015 (beige). Other RAL colors by order (minimum quantity 150 kg).
Consumption:2Approx. 1,5 kg/m /mm.
Two-component, self-leveling, conductible epoxy flooring
79
Epoxy-Based & Polyurethane Floorings
(A+B)
DUROFLOOR-R0404/2
10 kg
275 kg
10 kg
39
39
(A+B)
(A+B)
(A+B)
(A+B)
colorsOther
Two-component, solvent-free brushable epoxy coating, suitable for concrete or cement mortar surfaces.Color: RAL 7032 (sand grey), RAL 7035 (light grey), RAL 7040 (grey), RAL 3009 (redbrown), RAL 1015 (beige), RAL 1013 (white-beige), RAL 6021 (light green), RAL 5024 (pastel blue). Other RAL colors by order (minimum quantity 150 kg).
Consumption:2250-300 g/m /layer. Two-component,
brushable epoxy coating
DUROFLOOR-PU0431/2
Two-component,brushable polyurethanecoating
10 kg 39(A+B) (A+B)
Two-component, colored, polyurethane coating without solvents, with excellent resistance to UV radiation. DUROFLOOR-PU is used as a coating on concrete floors, cement screeds, etc. Color: RAL 7040 (grey). Other RAL colors by order (minimum quantity 150 kg).
Consumption: 2250-300 g/m /layer.
DUROFLOOR-BI0403/2
4 kg
10 kg
105
48
(A+B)
(A+B)
(A+B)
(A+B)
Two-component,colorless epoxyimpregnation
Two-component, colorless, solvent-based epoxy resin. Used asan impregnation on cement-based substrates to provide higherstability and abrasion resistance. Prevents dust creation onfloor surface. Also, used as a primer for EPOXYCOAT-VSF, EPOXYCOAT and EPOXYCOAT-S.
Consumption:2150-250 g/m /layer.
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
DUROPRIMER-W0423/2
21 kg 11(A+B+C) (A+B+C)
Three-component, water-based epoxy primer. It is used forpriming wet or fresh (age < 28 days) concrete floors that will be subsequently covered with epoxy layers of the DUROFLOORsystem.Color: Dark yellow.
Consumption:2250-300 g/m /layer.
Three-component,water-based epoxy primer
(A+B) (A+B)EPOXYPRIMER-W0402/2
Two-component, water-based epoxy primer. It is used as aprimer for cement-based substrates, e.g. concrete orcement-screeds, which will be covered with epoxy layers ofDUROFLOOR system. It can also be used as a primer ofISOFLEX-PU when applied over non-absorptive substrates orover old waterproofing layers. Color: Light yellow.
Consumption: 2200-300 g/m .
Two-component, water-based epoxy primer
10 kg 39
80
Industrial Floorings
Epoxy-Based & Polyurethane Floorings
DUROFLOOR-PSF0419/2
10 kg
280 kg
5 kg
39
48
(A+B)
(A+B)
(A+B)
(A+B) (A+B)6(A)
12(B)
Transparent, two-component, solvent-free epoxy primer. It is used as a primer on surfaces that will be subsequently coated with epoxy flooring systems, as a binder for preparing epoxy mortars with the addition of quartz sand and also for sealing cementitious floors at industrial areas and warehouses.Color: Light yellow.
Consumption: 2200-300 g/m .
Two-component, solvent-free epoxy primer
DUROPRIMER-PSF0402/2
Two-component, solvent-free epoxy primer. It is used as a primer on surfaces which will be subsequently coated with epoxy flooring systems and also as a binder for preparing epoxy mortars with addition of quartz sand.Color: Light yellow.
Consumption:2200-300 g/m .Two-component,
solvent-free epoxy primer
10 kg 39(A+B) (A+B)
DUROPRIMER0402/2
9 kg
200 kg
3 kg
48
105
(A+B)
(A+B)
(A+B)
(A+B) (A+B)
Two-component, colorless, solvent-based epoxy primer. It is used on substrates to be coated with epoxy layers of the DUROFLOOR system.
Consumption:2200-300 g/m .
Two-component epoxy primer
PS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
DUROPRIMER-SG0402/2
Two-component, solvent-free epoxy system. It is used as a primer for oil contaminated, but cleaned concrete surfaces and for the priming of still damp concrete or screed surfaces which will be covered with epoxy layers of DUROFLOOR system.Color: Light beige.
Consumption: 2600-1000 g/m .Epoxy primer for
oil contaminated concrete floors and vapour barrier
10 kg 39(A+B) (A+B)
81
Epoxy-Based & Polyurethane FlooringsPS/E.-PAL.PACKAG.DESCRIPTION - APPLICATIONPRODUCT/CODE PS/BOX
82
Industrial Floorings
APPENDIX
! Tools & Accessories
! Product Index
83
Tools & Accessories
84
1374/6
For setting uniform joints, while fixing ceramic tiles.Packaging: 500 pieces/bag.
For setting uniform joints, while fixing ceramic tiles.Packaging: 500 pieces/bag.
For setting uniform joints, while fixing glass-blocks.Packaging: 50 pieces/bag.
For fixing ceramic tiles.Packaging: 500 pieces/bag.
1399/6
1374/6
1364/6
1311/6
For the application of DUROFLOOR self-leveling epoxy floor.
1329/6
Adjustable floor finish scraper for the application of DUROFLOOR self-leveling epoxy floor.
1398/6
Additive of epoxy layers which increases thixotropy and decreases fluidity on vertical or sloped surfaces.
1318/6
Used on the fresh layer of DUROFLOOR self-leveling epoxy floor immediate after application with the notched trowel, permitting the trapped air to escape and homogenizing the mixture.
1319/6
Special shoes with spikes used during the application of DUROFLOOR self-leveling epoxy floor.
CROSS TILESPACERS
T-SHAPED TILESPACERS
CROSS GLASS-BLOCK SPACERS
WEDGES
TROWELNOTCHED
FLOOR FINISH SCRAPER
THIXOTROPICAGENT
SPIKED ROLLER
SPIKED SHOES
· 12 mm spikes.
DESCRIPTION - APPLICATIONPRODUCT/CODE PACKAG. WIDTH PS/E.-PAL.
6
bag/box
bag/box
bag/box
bag/box
8080
60
100
40
30
30
24
18145
3 mm
2 mm1 mm
3 mm4 mm5 mm7 mm
10 mm
5 mm7 mm
1,5 kg
Tools & Accessories
85
1301/6
For mastic cartridges 310 ml.
For mastic sausages 600 ml.
SPECIAL GUNFOR CARTRIDGES
1370/6
4061/6
Quartz sand of special granulometry for manufacturing flooring layers with DUROFLOOR.
Quartz sand of special granulometry for manufacturing flooring layers with DUROFLOOR 11.
Q35 QUARTZ SAND
M32 QUARTZ SAND
54
53
Bag
Bag
18 kg
25 kg
1324/6
Used during application of DUROFLOOR-C conductible epoxy floor.
COPPER TAPESELF-ADHESIVE 20 m
Roll
1308/6
Device for the application of injectable epoxy resins.
1360/6
For final surface treatment of plasters.
1361/6
For MARMOCRET Fine final surface treatment.
1331/6
Hard sponge for smoothing and emulsifying of MULTIFILL-EPOXY tile gout.
1332/6
Hard sponge with handle for smoothing and emulsifying of MULTIFILL-EPOXY tile grout.
1333/6
Soft sponge with handle for the final cleaning of MULTIFILL-EPOXY tile grout.
EPOXY RESININJECTION POT
METALLIC TROWEL
SPONGE TROWEL
HARD SPONGE
HARD SPONGEWITH HANDLE
SOFT SPONGEWITH HANDLE
Dimensions: 165 x 110 x 50 mm.
Dimensions: 15 x 30 cm.
Spare hard sponge.
Spare soft sponge.
Dimensions: 15 x 30 cm.
10
10
4
10
4
DESCRIPTION - APPLICATIONPRODUCT/CODE PACKAG. WIDTH PS/E.-PAL.
Product Index
86
PAGE PAGEPAGE PRODUCTPRODUCTPRODUCT
25
23
4
25, 50
11
4
5
26ADIPLAST
24ADINOL-RAPID
25ADIFLEX-B
ADINOL-DM
AQUAMAT-PENETRATE
ASOLIT-POWDER
AQUAMAT
AQUAFIX
AQUAMAT-F
4, 7AQUAMAT-ELASTIC
4, 7AQUAMAT-FLEX
22ADIUM 110
23ADIUM 130
ADIUM 150
24ADINOL-RAPID 2H
65
22
22
23
BEVETOL-SPL
BEVETOL-VZ
BEVETOL-RD
ASPHALTOS
61
61
61
61
60
61
CL-EPOXY FLOOR
CL-INDUSTRY
CL-MARBLE
CL-CLEAN
CL-UNIVERSAL
CL-GROUT
16
16
17
18
18
DELTA-FOL PVG
DELTA-FOL LP
DELTA-FOL PVE
DELTA-FLORAXX
DELTA-FLORAXX TOP
17
18
18
DELTA-NB
DELTA-MS
DELTA-NP-DRAIN
16
16
DELTA-VENT N
DELTA-VENT S
84CROSS TILE SPACERS
84CROSS GLASS-BLOCK SPACERS
85COPPER TAPE SELF-ADHESIVE
52CEMENT HIGH-STRENGTH
18DELTA TERMINATION BARS
19DELTA SCREWS
ADIUM 132 23
ADIUM 145 23
EXTRA-TOP CR 76
FLEX-PRIMER 9,55,73
FLEX PU-20 14, 63
FLEX-COVER 51
FLEXCOAT 9, 54
FLEX MS-45 15, 64
FERROSEAL
FD-CLEAN
FAST-COVER
44
52
60
FERROSEAL-MCI 44
74FIBERGLASS TAPE
11FIBERGLASS MESH FOR WATERPR.
74FIBERGLASS MESH FOR PLASTER
FLEX PU-2K 15, 63
FLEX PU-40 14, 63
GB-COVER 52
ISOFLEX-PU
ISOGUM 3V
ISODIEN 4 PF ALU
ISOCURE
ISOGUM P
27
6
8
8
7
76FLOWCRET 3-30 EXPRESS
ISOFLEX-T25 6
ISOCURE-A 27
ISOFLEX 6
FLOWCRET 1-10 76
76FLOWCRET 1-10 EXPRESS
84FLOOR FINISH SCRAPER
85HARD SPONGE WITH HANDLE
85HARD SPONGE
ISOLAC AQUA-GLOSS 56
ISOLAC AQUA-PRIMER 56
FLEX PU-50S 15, 63
FLEX PU-30S 15, 63
AQUAMAT-ADMIX 5
AQUAMAT-MONOFLEX 4, 7
CL-MOLD 54, 60
DOMOSIL-POOL 14, 62
13, 62DOMOSIL
DOMOSIL-MICRO 14, 62
DOMOSIL-S 14, 62
DUROCRET-PENETRATE 45
DUROFLOOR 78
EPOMAX-ANCHOR 47
DUROFLOOR-R
DUROPRIMER
DUROPRIMER-PSF
79
DUROFLOOR-C 79
78DUROFLOOR 11
DUROFLOOR-PSF 80
80
80
5, 81
EPOXYCOAT
DUROPRIMER-W
EPOMAX-L20
EPOMAX-L10
EPOMAX-LD
EPOMAX-PL
EPOMAX-STUCCO
ELASTOTAN
EPOMAX-EK
56
47
47
48
46
48
80
13, 64
46
DUROPRIMER-SG
DUREBOND 47
DRAGOFOL 16
DUROFLOOR-PU 79
DUROFLOOR-BI 57,78,79
DUROFLOOR-CV 79
DUROCRET 44
DUROCRET-FAST 44
DS-99 26
19DELTA WASHERS
25, 50DOMOLIT
25DOMOLIT-TR
EPOXYCOAT-S
EPOXYCOAT-AC
57
57
57
EXTRA-TOP
EPOXYCOAT-W
76
80
57
EPOXYCOAT-VSF
EPOXYPRIMER-W
85EPOXY RESIN INJECTION POT
DUROCRET-DECO 44, 77
DUROFLOOR-CMT 78
Product IndexPAGE PAGEPAGE PRODUCTPRODUCTPRODUCT
87
SM-14 58
PL-PRIMER
PL-BOND
PLASTIPROOF
73
73
5, 22
REOTOL-SPL 22
RAPICRET 45
PRIMER ACRYL 55
PRIMER CLASSIC
PRIMER ACRYL-S 55
53
PRIMER PU 6
PS-21
PS-20 10, 58
10, 58
RETADOL
ROOF-TOP
SCREED-100
24
77
17
SILICONE-PRIMER 73
SCREED-SX 77
SM-12 60
85Q35 QUARTZ SAND
48PLASTIC SLEEVE
27POLYPROPYLENE FIBERS
MONTAGE-W 41
MULTIFILL-EPOXY FLOW
MULTIFILL-EPOXY GLITTER
38
38
MULTIFILL-ELASTIC 38
MULTIFILL-EPOXY THIXO
MULTIFILL RAPID 1-8
38
35
MULTIFLEX
NANOPRO-C
NANOPRO-L
33
10, 58
10, 59
MULTIFILL SMALTO 1-8
MULTIFILL STONE
36
37
NANO-SEAL 9
PLANFIX 51
NANOPRO-M 10, 59
MULTIFILL 34
PLANFIX-FINE 51
47NOZZLES
MULTIFILL MARBLE 0-3 37
PLANFIX-FINE PROFESSIONAL 51
MEGAWRAP-200 48
MEGAPLATE 49
MEGAGROUT-101
MEGAGROUT-100
46
46
MONTAGE-S 41
MEGA RET-40C 45
MEGACRET-10 45
MARMOCRYL SILICONE Fine 72
MARMOCRET Decor
MARMOCRET Decor PLUS
MARMOCRET-BOND
68
69
68
MARMOCRET-SP 69
MARMOCRYL Decor 71
MARMOCRYL Fine 71
MARMOCRYL GRANIT
MARMOCRYL SILICONE Decor
71
72
MARMOCRET-S 69
MARMOCRET Fine
MARMOCRET Fine PLUS
68
69
MARMOCRET GRAFFIATO 69
MARMOCRET 1 68
MARMOCRET-BASE 68
85M32 QUARTZ SAND
85METALLIC TROWEL
MEGACRET-40 FAST 45
49, 70
49, 70
ISOMAT MT-80
ISOMAT MT-80 S
ISOMAT ST-1
ISO HYDROCHROMAMAT
70
ISOMAT SL 17
ISOMAT PU-FOAM
11
64
ISOMAT PROFESSIONAL CLASSIC
ISOMAT PROFESSIONAL ACRYL
53
55
53
ISOPAST
ISO-PRIMER
LATEX 26
52
8
JOINT-FILLER
ISOPAST-RUBBER
6
9
ISOMAT MT-200 40
ISOMAT SILICONE 54
ISOMAT PU FOAM PROFESSIONAL 64
ISOMAT AK-T35 39
ISOMAT AK-T33 39
ISOMAT AK-PRIMER
ISOMAT AK-PARQUET
33
41
ISOMAT AK-STONE
ISOMAT AK-RAPID
32
32
ISOMAT GLITTER 38
ISOMAT AK-T55 39
ISOMAT AK-THERMO ACRYL 40
ISOMAT BI-100 77
ISOMAT AK-THERMO 39
ISOMAT BUTYL TAPE ALU 17
12ISOMAT BUTYL TAPE
ISOMAT AK-GLASS 40
ISOMAT AK-GRAND 32
ISOMAT AK-FLUX
ISOMAT AK-ELASTIC
33
40
32
ISOMAT AK-FIRE
ISOMAT AK-EPOXY NORMAL
ISOMAT AK-EPOXY FAST
41
41
ISOMAT AK-BLOCK
ISOMAT AK-ECOLIGHT
40
31
ISOMAT AK-LIGHT 31
ISOMAT AK-MARBLE 32
ISOMAT AK-MEGARAPID 31
ISOMAT AK 50 33
ISOMAT AK 25 31
39ISOMAT AK-T65
ISOMAT BATH & KITCHEN 53
ISOLAC-BT 8
ISOMAC
ISOMAT ACRYL-
ISOMAT CLASSIC-
ISOMAT AG 77
ISOMASTIC-A
54
53
59
62
8, 65
ISOMAT AK 11 30
ISOMAT AK 12 30
ISOMAT AK 10 30
ISOMAT AK 9 30
ISOMAT AK 22 31
ISOMAT AK 20 30
ISOLAC AQUA-SATIN 56
Product IndexPAGE PAGEPAGE PRODUCTPRODUCTPRODUCT
Note:In case of ordering products with special colors that are not listed in the price list, explicit agreement about price anddelivery time is required.
VS-1 59
WATERPROOFING & UNCOUPLING MEMBRANE 13, 42
84WEDGES
WATERSTOP 1520 15
12WATERPROOFING MATERIALS
50, 70UNICRET-FAST
13, 64TIXOPHALTE
STUCCOCRET-PLUS
SUPERBOND-PU
51
42
11
49, 70UNICRET
TREVIRA
33, 73UNI-PRIMER
UNCOUPLING MEMBRANE 42
84T-SHAPED TILE SPACERS
84TROWEL NOTCHED
84THIXOTROPIC AGENT
SM-18 55
STUCCOCRET 50
SPLIT-2000 26
84SPIKED SHOES
84SPIKED ROLLER
85SPONGE TROWEL
85SOFT SPONGE WITH HANDLE
85SPECIAL GUN FOR CARTRIDGES
SM-16 7, 60
Notes
ISOMAT. Building quality
ISOMAT is the potent, liable company that sets new standards in building. The products of ISOMAT are innovative and offer smart solutions in new constructions, in renovation and in restoration of damages.
They are developed in the Research and Development Department with devotion to quality and emphasis in detail. When reaching the market they should be perfect in every aspect. They should provide radical solutions, be user-friendly, economic and reliable through time. Our satisfied customers from the world of construction, industry and commerce are our best reference.
Nevertheless, ISOMAT moves further on. With a highly qualifiedstaff of engineers, we provide reliable technical support to everyone concerned. The consultant of ISOMAT is always close to you in order to advice you on any building issue. Because ISOMATis interested in your success and in the quality of your construction.
05/2012
ISOMAT S.A.BUILDING CHEMICALS AND MORTARS
MAIN OFFICES - FACTORY th17 km Thessaloniki - Ag. Athanasios Road
P.O. BOX 1043, 570 03 AG. ATHANASIOS, GREECETel.: +30 2310 576 000, Fax: +30 2310 722 475