“iso sovereign” centrifugal pumps
TRANSCRIPT
Form 2724A March 2007
“ISO SOVEREIGN”
CENTRIFUGAL PUMPS
Optional Mounting for HorizontalDischarge to either side.
Back-Pull-OutFeature
SOU
THER
N
CR
OSS
APPLICATIONS
l Designed for efficientand reliable generalpurpose water transferin industry, buildingservices andirrigation.
FEATURES
l Superiorhydraulic designand manufacturingmethods produce significantly higher efficiencies for lowerrunning costs andreduced maintenance.
l Australian designedand manufactured.
l 32 to 200mm discharge.
l Up to 250 litres persecond discharge.
l Heads to 160 metres.
l World-wide serviceand backup.
l Wide range of options.
“ISO SOVEREIGN”
CENTRIFUGAL PUMPS
Available from…
“ISO Sovereign”PERFORMANCE TESTING
Where guaranteed pump performance is required Southern Cross willperform Works Certified or Works Witnessed Tests using the latestcomputer performance monitoring equipment installed in the SouthernCross Pump Test Laboratory.
“ISO Sovereign” PUMP MOUNTINGNormal horizontal mounting gives vertical centre-line discharge, howeverany angle from horizontal to vertical is acceptable. A feature of the SouthernCross “ISO Sovereign” range of pumps is the ability to mount the bodysideways for horizontal discharge to either side. This is done using twosimple mounting brackets which align with the same mounting holes asused for normal foot mounting so that no base modifications are necessaryto change the pump discharge from vertical to horizontal.
BACK PULL OUTWhen a spacer coupling is used pumpbody, suction and discharge lines, andelectric motor remain undisturbedduring servicing. This saves valuabletime and eliminates pump and motorrealignment.
…setting thestandard for pumpperformance and quality…
Australian madeto…
ISO 2858International Standard
VOLUMETRIC FLOW RATE
TO
TAL
HE
AD
IN M
ET
RE
S
L/SEC 3 4 5 6 8 10 20 30 40 50 70 100 150 200 300
M3/HR 10 20 30 50 100 150 250 500 1,000
USGPM 50 100 150 250 500 1,000 1,500 2,500 5,000
TO
TAL
HE
AD
IN F
EE
T
100
80
60
50
40
30
20
10
8
6
5
4
400
300
200
100
50
40
30
20
15
VOLUMETRIC FLOW RATE
TOTA
L H
EA
D IN
ME
TRE
S
L/SEC 3 4 5 6 8 10 20 30 40 50 70 100 150
M3/HR 10 20 30 50 100 150 250 500
USGPM 50 100 150 250 500 1,000 1,500
IGPM 50 100 150 250 500 1,000 1,500
TOTA
L H
EA
D IN
FE
ET
200
150
100
80
60
50
40
30
20
15
600
500
400
300
200
150
100
50
IGPM 50 100 150 250 500 1,000 1,500 2,500
1450 R.P.M.(Nominal Speed)
65x40-315
65x40-250
50x32-200
50x32-160
65x50-160 100x80
-160
100x65-200
80x50-200
100x65-315
65x40 -200
80x65-160
80x50-250
100x65-250
125 x100 -250
125x 100 -200 125
x80-200
125 x80-250
125 x80 -31580x50
-315
50x32-160 65x50
-160
50x32-200
65x40-250
80x50-200
80x50-250
80x50-315
80x65-160
65 x 40 -200 100x65
-200
125x80-400
100x65-315
100x65-250
125x100-400
200 x150-315
150x125-250
200 x150 -400
200 x150 -500
150 x125 -315
250x 200 -315
150 x125 -500
125x100-500
150x125-400
100x80-160
125x 100- 250
125x 100 -200 125
x80-200
125x80- 250
125 x100 -315
125 x80 -315
65x40-315
2900R.P.M.(NominalSpeed)
PUMP SELECTION GUIDE
2 YEAR WARRANTY
CENTRIFUGAL
PUMPS
Special design features of Southern Cross“ISO Sovereign” Pumps include taper mountedand keyed impeller for easy removal from shaftduring servicing and positive locking duringoperation; heavy duty shaft with large capacityimpeller end bearing for safe operation at highspeed; AS1830/T260 cast iron volute for addedsafety; reusable “O” ring body seal; minimumnumber of parts for full range (only four shaftmodules) reduces spare parts stocking;hydraulically and dynamically balancedimpellers; and highly efficient suctionperformance from double curvature impellervanes.
l STANDARD FEATURES
Type 431 stainless steel shaft; rugged castiron volute with integral suction and dischargeflanges and mounting feet; pressure rated to1600kPa (160 metres head); cast iron impellerand backplate; stainless steel impeller nut;cast iron bearing housing with sealed for lifegrease packed bearings (standard sizes readilyavailable from most bearing suppliers); lip typeshaft seals to protect bearings; singlemechanical seal.
l OPTIONAL MATERIALS
Zinc-free bronze impeller,type 316 stainlesssteel shaft and Molybond coating.
l OPTIONAL EXTRASZinc-free bronze wear rings for impeller, voluteand backplate; optional single mechanicalseals; soft packed gland seals; works certifiedand witnessed tests for guaranteedperformance; impeller turn-downs; flexibleand spacer couplings; pulleys; and pressedor welded steel baseplates.
l MAXIMUM OPERATING TEMP.
Maximum pumped liquid temperature forSouthern Cross “ISO Sovereign” Pumps is80°C using standard seals. Liquids up to 180°Ccan be handled using special seals… consultSouthern Cross Customer Service Unit forfurther information.
INTERNATIONAL STANDARDConforming with ISO2858 Standard means dimensionalinterchangeability with other makes of pumps, manufacturedto the same international standard, however because ofdesign superiority Southern Cross “ISO Sovereign” Pumpsexceed the performance standard.
“ISO Sovereign” FEATURESThese Australian designed and manufactured SouthernCross “ISO Sovereign” Pumps are readily available in afull range of sizes, backed not only by an Australia wideservice and spare parts network, but with an extensivegroup of international stock and service centres.
REDUCED RUNNING COSTSSuperior hydraulic design and high technologymanufacturing methods produce significantly higherefficiencies for less power consumption and minimummaintenance …features which guarantee Southern Cross“ISO Sovereign” Pump users continuing savings in allapplications.
GENERAL-PURPOSE PUMPSSouthern Cross “ISO Sovereign” Pumps offer top efficiencyand reliability for a full range of general purpose watertransfer applications in industry, building services andirrigation.
…setting the standardfor pump performance
and quality…
TAPPED AND PLUGGEDVOLUTE DRAIN HOLE
PUMP CONSTRUCTION FEATURES…
TAPPEDCONNECTION
FORSUCTION
GAUGE
SUPERIOR HYDRAULIC DESIGN FOR GREATERPERFORMANCE AND REDUCED RUNNING COSTS
SEPARATE PUMPBACKPLATE FOR
EASY PUMPSERVICING
HEAVY DUTY SEALEDFOR LIFE GREASEPACKED BEARINGS
ROBUSTCAST IRONBEARINGHOUSING
LIP TYPESEALSFOR BEARINGPROTECTION HEAVY DUTY
STAINLESS STEELSHAFT FOR MINIMUMDEFLECTION AT HIGH
SPEEDS
REMOVABLEPUMP MOUNTING FOOT
MECHANICALSHAFT SEAL
REUSABLE “O” RINGSEAL BETWEEN PUMP
VOLUTE AND BACKPLATE
STURDY MOUNTING FEET CAST INTEGRAL WITH PUMP BODY
FLANGES TOAS2129 TABLE “E”
OPTIONAL DRILLINGSON REQUEST
TAPPED CONNECTIONFOR PRESSURE
GAUGE
TAPERMOUNTED
AND KEYEDIMPELLERFOR EASYREMOVAL
AND POSITIVELOCKING
WATERSLINGER
OPTIONALIMPELLER
AND CASINGWEAR RINGS