cieaiciea.cumhuriyet.edu.tr/images/proceeding/ftp.pdf · isbn: 2587-1943 2018 book of full text...
TRANSCRIPT
ISBN: 2587-1943
2018
BOOK OF FULL TEXT
PROCEEDINGS
CIEA INTERNATIONAL CONFERENCE ON
INNOVATIVE ENGINEERING
APPLICATIONS
20-22 September 2018 / Sivas, Turkey
Organized by
Supported by
Book of Full Text of the International
Conference on Innovative Engineering
Applications (CIEA’2018)
Editors
Prof. Dr. Hikmet Esen
Prof. Dr. Niyazi Özdemir
Asst. Prof. Dr. Serdar Mercan
Published, 2018 [email protected]
This work is subject to copyright. All rights are reserved, whether the whole or part of the
material is concerned. Nothing from this publication may be translated, reproduced, stored in a
computerized system or published in any form or in any manner, including, but not limited to
electronic, mechanical, reprographic or photographic, without prior written permission from
the publisher.
www.iciea.cumhuriyet.edu.tr
The individual contributions in this publication and any liabilities arising from them remain the
responsibility of the authors.
The publisher is not responsible for possible damages, which could be a result of content
derived from this publication.
ISBN: 2587-1943
SCIENTIFIC COMMITTEE
Prof. Dr. Abdelkarim Mekki, King Fahd University of Petroleum Minerals, S.ARABIA
Prof. Dr. Abderrahmane Bairi, University Paris Ouest LTIE-GTE, FRANCE
Prof. Dr. Adem Kurt, Gazi University, TR
Prof. Dr. Adrian Briggs, University of London, UK
Prof. Dr. Ahmet Durgutlu, Gazi University, TR
Prof. Dr. Ahmet Ziyaettin Sahin, King Fahd University, SAUDI ARABIA
Prof. Dr. Ali Chamkha, Kuwait University, KUWAIT
Prof. Dr. Ali Sekmen, Tennessee State University, USA
Prof. Dr. Alireza A. Ardalan, Tehran University, IRAN
Prof. Dr. Andrew Collop, The University of De Montfort, UK
Prof. Dr. Andrzej Trytek, Rzeszow University of Technology, POLAND
Prof. Dr. Asaf Varol, Fırat University, TR
Prof. Dr. Attieh Alghamdi, King Abdulaziz University, SAUDI ARABIA
Prof. Dr. Baki Karamış, Erciyes University, TR
Prof. Dr. Behçet Gülenç, Gazi University, TR
Prof. Dr. Bendine Madani, University of Sidi Bel Abbes, ALGERIA
Prof. Dr. Byeong-Kwon JU, Korea University, KOREA
Prof. Dr. Chris Bowen, University of Bath, UK
Prof. Dr. Christian Wenger, Innov. for High Performance Microelectronics, GERMANY
Prof. Dr. Chung Gwıy-Sang, Ulsan University, KOREA
Prof. Dr. D. S. Patıl, North Maharashtra University, INDIA
Prof. Dr. Darina Arsova, Institute of Solid State Physics, Sofia, BULGARIA
Prof. Dr. Denis Nıka, Moldova University, MOLDOVA
Prof. Dr. Eiyad Abu-Nada, Hapshemite University, JORDAN
Prof. Dr. F. M. Amanullah, King Saud University, SAUDI ARABIA
Prof. Dr. Fatih Kurugöllü, Queen's University Belfast, UK
Prof. Dr. Fernando Gutierrez, University Polytechnic of Madrid, SPAIN
Prof. Dr. Fumihiko Hırose, Yamagata University, JAPAN
Prof. Dr. Grzegorz KarczewskI, Polish Academicy of Sciences, POLAND
Prof. Dr. Ikhlas Abdel-Qader, Western Michigan University, USA
Prof. Dr. Ioan Pop, University of Cluj, ROMANIA
Prof. Dr. İbrahim Dinçer, University of Ontorio, CANADA
Prof. Dr. Sedat Kolıkısa, Munzur University, TR
Prof. Dr. Irfan Awan, University of Bradford, UK
Prof. Dr. İsmail Fidan, Tennessee Tech University, USA
Prof. Dr. Ismet Gursul, University of Bath, UK
Prof. Dr. Jay Khodadadi, Auburn University, USA
Prof. Dr. Jingkun XU, Technology Normal University, CHINA
Prof. Dr. Jose Sena Cruz, University of Minho, PORTUGAL
Prof. Dr. Juan Carlos Martinez-ANTON, Complutense University of Madrid, SPAIN
Prof. Dr. Juan Mario GARCIA de MARIA, University of Madrid, SPAIN
Prof. Dr. K.W. Chau, Hong Kong Polytechnic University, HONG KONG
Prof. Dr. Khasan S. Karimov, GIK Institute, PAKISTAN
Prof. Dr. Khanlar Baghırov, Cumhuriyet University, TR
Prof. Dr. M. Hasnaoui, University Cadi Ayyad, MOROCCO
Prof. Dr. M.T. Alonso-Rasgado, University of Manchester, UK
Prof. Dr. Majumdar J. Datta, Indian Institute of Tehcnology Kharagpur, INDIA
Prof. Dr. Marco Antonio Schiavon, Universidade Federal de São João Del Rei, BRAZIL
Prof. Dr. Marco Viceconti, University of Sheffield, UK
Prof. Dr. Marga Jann, Girne American University, TRNC
Prof. Dr. Mariam Ali S A Al-Maadeed, Qatar University, QATAR
Prof. Dr. Mehmet Eroğlu, Fırat University, TR
Prof. Dr. Mehmet Şimşir, Cumhuriyet University, TR
Prof. Dr. Messaoud Saidani, Conventry University, UK
Prof. Dr. Moghtada Mobedi, İzmir High Technology Institute, TR
Prof. Dr. Mohamed Bououdina, Univeristy of Bahrain, KINGDOM OF BAHRAIN
Prof. Dr. Muhammad Hassan Sayyad, Ghulam Ishaq Khan Institute, PAKISTAN
Prof. Dr. Mustafa Çanakcı, Kocaeli University, TR
Prof. Dr. Mustafa Kurt, Marmara University, TR
Prof. Dr. Mustafa Taşkın, Mersin University, TR
Prof. Dr. N. Özgen Erdem, Cumhuriyet University, TR
Prof. Dr. Najib Laraqi, University Paris Ouest LTIE-GTE, FRANCE
Prof. Dr. Nizamettin Kahraman, Karabük University, TR
Prof. Dr. Nourah AL Senany, King Abdulaziz University, SAUDI ARABIA
Prof. Dr. Orhan Aydın, Karadeniz Technical University, TR
Prof. Dr. Osman Dayan, Çanakkale Onsekiz Mart University, TR
Prof. Dr. Ömer Usta, İstanbul Technical University, TR
Prof. Dr. Peter Clegg, University of Bath, UK
Prof. Dr. Rachid Bennacer, University of Cergy Pontoise, FRANCE
Prof. Dr. Ramazan Bayındır, Gazi University, TR
Prof. Dr. Ramazan Çıtak, Gazi University, TR
Prof. Dr. Ramazan Kaçar, Karabük University, TR
Prof. Dr. Ramazan Köse, Dumlupınar University, TR
Prof. Dr. Ramin Yousefi, Islamic Azad University, IRAN
Prof. Dr. Ray Sheriff, University of Bradford, UK
Prof. Dr. Recep Çalın, Kırıkkale University, TR
Prof. Dr. Richard Trask, University of Bath, UK
Prof. Dr. Ridha Ben Yedder, Université de Québec, CANADA
Prof. Dr. R. H. Al Orainy, King Abdulaziz University, SAUDI ARABIA
Prof. Dr. Sandor M. Veres, University of Sheffield, UK
Prof. Dr. Sahir Salman, Gazi University, TR
Prof. Dr. Sarah Cartmell, University of Manchester, UK
Prof. Dr. Sema Salgın, Cumhuriyet University, TR
Prof. Dr. Serdar Salman, National Defense University, TR
Prof. Dr. Subhash Chand, National Institute of Technology, INDIA
Prof. Dr. Syed Ali Rizwan, National University of Sci.& Tech., PAKISTAN
Prof. Dr. Şahin Albayrak, DAI-Labor, Technische Universitat Berlin, GERMANY
Prof. Dr. Şükrü Karataş, Kahramanmaraş, Sütçü İmam University, TR
Prof. Dr. Şükrü Talaş, Afyon Kocatepe University, TR
Prof. Dr. Tahir I. Khan, University of Bradford, UK
Prof. Dr. Tanmay Başak, Indian Institute of Technology, INDIA
Prof. Dr. Ulvi Şeker, Gazi University, TR
Prof. Dr. Vítor António Ferreira da Costa, Universidade de Aveiro, PORTUGAL
Prof. Dr. Wazirzada Aslam Farooq, King Saud University, SAUDI ARABIA
Prof. Dr. Weite Wu, National Chung Hsing University, TAIWAN
Prof. Dr. Yu Bo, China University of Petroleum, P. R. CHINA
Prof. Dr. Yusuf Al-Turkı, King Abdulaziz University, SAUDI ARABIA
Prof. Dr. Yusuf ALTINTAŞ, The University of British Columbia, CA
Prof. Dr. Yusuf Öztürk, San Diego State University, USA
Prof. Dr. Zaıtsev, D. D., Moscow State University, RUSSIA
Prof. Dr. Zaki Mohamed, Taif University, EGYPT
Prof. Dr. Zeyad A. Alahmed, King Saud University, SAUDI ARABIA
Prof. Dr. Zi-Qiang Zhu, University of Sheffield, UK
Prof. Dr. Zoubir Zouaoui, Glyndwr University, UK
Assoc. Prof. Dr. Ahmet Fertelli, Cumhuriyet University, TR
Assoc. Prof. Dr. Ali Gürsel, International University of Sarajevo, BOSNIA
Assoc. Prof. Dr. Arif Gök, Amasya University, TR
Assoc. Prof. Dr. Burak Yön, Munzur University, TR
Assoc. Prof. Dr. Celaleddin Yeroğlu, İnönü University, TR
Assoc. Prof. Dr. Cihan Varol, Sam Houston State University, USA
Assoc. Prof. Dr. Erol Kılıçkap, Dicle University, TR
Assoc. Prof. Dr. Murat Gökçek, Niğde Ömer Halisdemir University, TR
Assoc. Prof. Dr. Özen Özer, Kırklareli University, TR
Assoc. Prof. Dr. Tahir Çetin Akıncı, İstanbul Technical University, TR
Assoc. Prof. Dr. Yüksel Esen, Fırat University, TR
Asst. Prof. Dr. Ahmet Akkuş, Cumhuriyet University, TR
Asst. Prof. Dr. Anas M. Atieh, School of Applied Technical Sciences, JORDAN
Asst. Prof. Dr. Bendine Kouider, University of Sidi Bel Abbes, ALGERIA
Asst. Prof. Dr. Bülent Kar, Munzur University, TR
Asst. Prof. Dr. D. Engin Alnak, Cumhuriyet University, TR
Asst. Prof. Dr. Deepika Garg, GD Goenka University, IN
Asst. Prof. Dr. Erdem IŞIK, Munzur University, TR
Asst. Prof. Dr. Erkan Bahçe, İnönü University, TR
Asst. Prof. Dr. Ferit AK, Munzur University, TR
Asst. Prof. Dr. Gökhan Önder Ergüven, Munzur University, TR
Asst. Prof. Dr. Günyaz Ablay, Abdullah Gül University, TR
Asst. Prof. Dr. Halil Arslan, Cumhuriyet University, TR
Asst. Prof. Dr. Haluk Kejanlı, Dicle University, TR
Asst. Prof. Dr. Hidayet Takcı, Cumhuriyet University, TR
Asst. Prof. Dr. İ. Noyan Yalman, Cumhuriyet University, TR
Asst. Prof. Dr. İlkay Demir, Cumhuriyet University, TR
Asst. Prof. Dr. İsmail Uzun, Süleyman Demirel University, TR
Asst. Prof. Dr. Murat Bostancıoğlu, Cumhuriyet University, TR
Asst. Prof. Dr. Oğuzhan Görler, Cumhuriyet University, TR
Asst. Prof. Dr. Onur Onat, Munzur University, TR
Asst. Prof. Dr. Önder Gürsoy, Cumhuriyet University, TR
Asst. Prof. Dr. Ö. Begüm Gökçek, Niğde Ömer Halisdemir University, TR
Asst. Prof. Dr. Özlem Polat, Cumhuriyet University, TR
Asst. Prof. Dr. M. Reza Bakhtyari, Razi University, IRANIAN
Asst. Prof. Dr. Salwa Bouadila, CRTEn, TUNUSIA
Asst. Prof. Dr. Serdar Kockanat, Cumhuriyet University, TR
Asst. Prof. Dr. Tarık Türk, Cumhuriyet University, TR
Asst. Prof. Dr. Temel Varol, Karadeniz Technical University, TR
Asst. Prof. Dr. Tayfun Fındık, Gazi University, TR
Asst. Prof. Dr. Uğur Tutar, Cumhuriyet University, TR
Asst. Prof. Dr. Yavuz Gül, Cumhuriyet University, TR
Asst. Prof. Dr. Yunis Torun, Cumhuriyet University, TR
Asst. Prof. Dr. Yusuf Doğan, Munzur University, TR
Asst. Prof. Dr. Zülküf Balalan, Bingöl University, TR
Asst. Prof. Dr. Tahsin Yüksel, Cumhuriyet University, TR
Asst. Prof. Dr. Zeki Omaç, Munzur University, TR
Dr. Mehmet Kayra Tanaydın, Munzur University, TR
Dr. Mustafa Ali, Coventry University, UK
Dr. Savas Konur, University of Bradford, UK
Dr. Javad Khamisabadi, Islamic Azad University, IR
ORGANIZATION COMMITTEE
Chairman of Conference
Prof. Dr. Hikmet Esen – Fırat University
Asst. Prof. Dr. Serdar Mercan – Cumhuriyet University
Secretary
Res. Asst. Abdullah Kapıcıoğlu – Cumhuriyet University
Layout Secretary
Res. Asst. Cihangir Kale
Res. Asst. Alper Polat
Res. Asst. Habip Şahin
Res. Asst. Tarık Şeker
Res. Asst. Melek Güner
Res. Asst. Burhan Yılmaz
Res. Asst. Büşra Çulcu
Res. Asst. Ezgi Gürgenç
PhD. Student Fehmi Aslan
Members of the Committee
Prof. Dr. Hikmet ESEN, Munzur University, TR
Prof. Dr. Niyazi ÖZDEMİR, Fırat University, TR
Prof. Dr. Meltem SARIOĞLU CEBECİ, Cumhuriyet University, TR
Assoc. Prof. Dr. İbrahim CAN, Cumhuriyet University, TR
Asst. Prof. Dr. Serdar MERCAN, Cumhuriyet University, TR
Assoc. Prof. Dr. Hacı Mehmet BAŞKONUŞ, Munzur University, TR
Asst. Prof. Dr. Ferit AK, Munzur University, TR
Welcome to CIEA’2018
It is a pleasure for us to offer you Full Text Book for the International Conference on Innovative
Engineering Applications CIEA’2018. Our goal was to create a scientific platform that
introduces the newest results on internationally recognized experts to local students and
colleagues and simultaneously displays relevant Turkish achievements to the world. The
positive feedback of the community encouraged us to proceed and transform a single event into
a conference series. Now, CIEA’2018 is honored by the presence of over 300 colleagues from
various countries. We stayed true to the original CIEA’2018 concept and accepted contributions
from all fields of innovative and advanced technologies to promote multidisciplinary
discussions. The focal points of the conference emerged spontaneously from the submitted full-
texts: civil, metalurrgy-material technologies, food sciences, bioengineering, electrical, energy
applications, advanced materials, electronic and optoelectronic devices. Our warmest thanks go
to all invited speakers, authors, and contributors of CIEA’2018 for accepting our invitation. We
hope that you will enjoy the conference and look forward to meeting you again in one of the
forthcoming CIEA’2018 event.
Best regards,
Chairmans of Conference
Prof. Dr. Hikmet ESEN
Asst. Prof. Dr. Serdar MERCAN
Chapter 1
ID Number- NAME OF ARTICLE (Author (s))…………………..………..Page Number
5- INVESTIGATION OF 17-4 PH STAINLESS STEEL FABRICATED BY LASER-POWDER BED FUSION (H. Irrinki, J. S. D.
Jangam, S. Pasebani, S. Badwe, J. Stitzel, K. Kate, H. O. Gulsoy, S. V. Atre)……………………………………………………1
9- DESIGNING AND MANUFACTURING OF A PROTOTYPE 3 AXIS CNC MILLING MACHINE (A. Akkus, Ö.
Karabey)……………………………………………………………………………………………………………..…………………………9
13- THE INVESTIGATION OF WEAR PROPERTIES ON COMPACT GRAPHITE CAST IRON (CGI) (A. Akkus, M. A.
Hafızoğlu)………………………………………………………………………………………………………………….….………………17
14- BIOREMOVAL OF HERBICIDE METRIBUZIN (G. O. Erguven)……………………………………….………………..……….25
22- TWO-STAGE OUTLIER DETECTION ALGORITHM BASED ON FOURIER TRANSFORM: REAL DATA APPLICATIONS
(E. C. Erkuş, V. Purutçuoğlu)……………………………………………....……………………………………………………………30
23- A RESEARCH ON USE OF LINEAR GOAL PROGRAMMING MODEL IN PUBLIC TRANSPORTATION (M. Yesilkaya, M.
A. Gençer, T. Eren, G.S. Daş)……………………………………………………………………………………..………………………38
24- ONLINE MARKETPLACE PLATFORM SELECTION WITH MULTI CRITERIA DECISION MAKING METHODS (M.
Yesilkaya, T. Eren, G. S. Daş)…………………………………………………………………………………….………………………46
30- MODELLING OF THE HYDRODYNAMIC FLOW AND EROSION FOR THE 4 DIFFERENT CIRCULATING FLUIDISED BED
BOILER DESIGNS BY COMPUTATIONAL PARTICLE FLUID DYNAMICS (B. Gürel, O. İpek, M. Kan)……….………………54
31- A REVIEW STUDY ON THE USING OF DIETHYL ETHER IN DIESEL ENGINES: EFFECTS ON ENGINE PERFORMANCE
(İ. Sezer)………………………………………….……….………………………………………………………………………………….62
32- A REVIEW STUDY ON THE USING OF DIETHYL ETHER IN DIESEL ENGINES: EFFECTS ON CO2 EMISSIONS (İ.
Sezer)……………………………………………………………………………………………………………………………………..….71
34- EFFECT OF COOLING RATE ON CORROSION RESISTANCE OF AL-25ZN-3CU ALLOY (A.P. Hekimoğlu, M.
Hacıosmanoğlu)………………………………………………………………………….………………………..…………….…………80
35- SHELL MODEL CALCULATION FOR F AND AL ISOTOPES (S. Akkoyun, T.
Bayram)……..………………………………………………………………………………………………………………………..………89
39- ALTERING THE ELECTROCHEMICAL-OPTICAL PROPERTIES BY COMBINING DIFFERENT MONOMERS IN THE SAME POLYMER BACKBONE (E. G. Cansu Ergun)……………………………………………………………………………………94
45- PRODUCTION OF MICRONUTRIENT FROM WASTE BATTERIES AND ITS EFFECT ON GROWING PLANTS (M. H. Morcali, M. Aksu, S. Çankaya)……………………………………………………………………………………………………...……..99
46- DEVELOPMENT OF PRECIPITATION CONDITIONS ON TEXTILE WASTEWATER (E. Demir, M. H. Morcali)…………102
49- INVESTIGATION OF RELATIONSHIPS BETWEEN ABRASION RESISTANCE AND PHYSICO-MECHANICAL
PROPERTIES OF SOME ROCKS (K. Kumas, A. Sencan Sahin, E. Dikmen……………………………………………………..105
58- PRODUCTION OF ELECTROLYTIC COPPER FROM MALACHITE ORE PRACTICING OF LEACHING, SOLVENT EXTRACTION AND ELECTROLYSIS METHODS (M. K. Tanaydın, N. Demirkıran)……………………………………………..111
59- THE INVESTIGATION OF IMPROVEMENT THE LIQUEFACTION PRODUCTS EFFICIENCY OF SIVAS-KANGAL LIGNITE (A. A. Korkmaz, İ. Bentli)………………………………………………………………………………………………………119
60- ASSESSMENT OF WASHABILITY FEATURES OF KANGAL LIGNITE BY USING DIFFERENT INDEXES (A. A. Korkmaz, İ. Bentli)………………………………………………………………………………………………………………………….126 62- BEVERAGE FILLING AUTOMATION BY MOBILE PROGRAMMING AND AN EVALUATION OF PRODUCTION
FORECAST (İ. Tarımer, A. Ekti, Y. Aymak)…………………………………………………………………………………………....134
63- SENTIMENT ANALYSIS ON IMDB MOVIE COMMENTS AND TWITTER DATA BY MACHINE LEARNING AND VECTOR
SPACE TECHNIQUES (İ. Tarımer, A. Çoban, A. E. Kocaman)….……………………………………………………………….…142
66- AN EXAMINATION OF CONCRETE ARCH OF IRGANDI BRIDGE THROUGH FINITE ELEMENT METHOD (A. Gönül, G.
B. Sakcalı, İ. Gümüş)………………………………………………………………………………………………………………………150
67- THE EFFECT OF VARIATION IN LENGTH ON STRUCTURE OF HISTORICAL BRIDGE ARCHES (G. B. Sakcalı, A.
Gönül)………………………………………………………………………………………………………………………..………………158
73- THE EFFECT OF BARİTE DUST ON THE MECHANİCAL AND PHYSİCAL PROPERTİES OF SELF-COMPACTİNG
MORTARS (S. Cemalgil, S. Etli, O. Onat)……………………………………………..……………………………………………….165
74- INVESTIGATION PROPERTIES OF SELF-COMPACTING MORTAR PRODUCED WITH BASALT DUST (S. Cemalgil, S.
Etli, O. Onat)……………………………………………………………………………………………………………………………...…170
75- MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AISI-420 STAINLESS STEELS PRODUCED BY LASER-
POWDERED BED FUSION (S. D. Nath, H. Irrsinki, M. Kearns, O. Gulsoy, S. V. Atre)………………………............…………..176
Chapter 2
76- THE IMPORTANCE OF SERUM PROTEIN ISOLATES PRODUCED FROM WHEY AND USE POSSIBILITIES (F.
Yangılar)……………………………………………………………………………………………………………………………………184
77- THERMAL ANALYSIS IN VVER-1000 REACTOR USING NANOFLUID COOLANT MIXED ALUMINIA (S. Uzun, A.
Acır)…………………………………………………………………………………………………………………………………………..195
87- ERROR CORRECTIONS FOR QUANTUM LOGICAL GATES VIA SPEED GRADIENT CONTROL (S. Borisenok, A.
Faradkov)……………………………………………………………………………………………………………………………………202
88- INVESTIGATION OF POSSIBILITIES OF USING ESSENTIAL OILS INSTEAD OF NITRITE IN CHICKEN SALAMI (Ö. P.
Can, E. Hastaoğlu, H. Vural, B. Yücel)…………………………………………………………………………..…………………….207
89- INVESTIGATION OF THE EFFECT OF FINE GRAINED TUFF ON THE PERFORMANCE OF FOAM CONCRETE (L.
Gündüz, Ş. O. Kalkan)…………………………………………………………………………………………………………..…………214
90- A TECHNICAL ANALYSIS ON THE USE OF PVAC ACRYLIC ESTER TERPOLYMER TYPE IN COMPOSITE MORTARS FOR INSULATION (L. Gündüz, Ş. O. Kalkan, M. İsker)…………………………………………………………..…………………...222
91- CONTROL OF EPILEPTIFORM DYNAMICS IN THE HODGKIN-HUXLEY NEURAL POPULATIONS (S. Borisenok)………………..……………………………..…………………………………………………………………………………..231
92- PERFORMANCE COMPARISON OF REFRIGERANTS R1234ZE(E), R1234YF AND R134A IN AN AUTOMOBILE AIR CONDITIONING SYSTEM (M. Hoşöz, A. Alkan)………..……………………………………………………………………………..239
94- STABILITY ANALYSIS OF GRAPHENE OXIDE NANOPARTICLES IN DIFFERENT FLUIDS (N. K. Çakmak)………….247
96- EVALUATION OF ENGINE CHARACTERISTICS AT DIFFERENT REVOLUTIONS OF DIESEL ENGINES (T. Koca, A. Şahinaslan)…………………………………………………………………………………………..……………………………………..252
98- ANALYTICAL SOLVING OF NATURAL WATER CIRCULATION SYSTEM AND NUMERICAL MODELING OF TWO PHASE FLOW IN THE RAISERS (B. Gurel, O. İpek, M. Kan)…………………………………………………………………………259
101- ASSESSMENT OF USE SAFETY IN NATURAL GAS RESIDENTIAL BUILDINGS IN ANKARA AND SUGGESTIONS (T. Koca, A. Şahinaslan, M. Sancakoğlu)…………………………………………..………………………………………………………267
102- EXPERIMENTAL HEAT TRANSFER PERFORMANCE OF A LOUVERED-FIN AND FLAT-TUBE AUTOMOTIVE RADIATOR FOR VARIOUS ENGINE COOLANTS (E. Keklik, M. Hoşöz)…………………………………………………….…….278
103- A FINITE ELEMENT FOR FREE VIBRATION ANALYSIS OF TAPERED BEAMS (V. Kahya, S. D. Güneş, S.Karaca)……………………………………………………….………………………………………………………………………………286
112- OPTIMIZATION OF LEACHING OF MANGANESE FROM WASTE BATTERY POWDERS BY RESPONSE SURFACEMETHODOLOGY (G. D. T. Özdemir, N. Demirkıran)…………………………………………………………….…………………….293
113- SELECTIVE DISSOLUTION OF ZINC AND MANGANESE FROM WASTE ALKALINE BATTERY POWDERS BY TWO-STAGE LEACHING METHOD (G. D. T. Özdemir, N. Demirkıran)………………………………..…………………………………309
114- DISSOLUTION KINETICS OF ZINC OXIDE POWDER OBTAINED WASTE ALKALINE BATTERIES IN SODIUMHYDROXIDE SOLUTIONS (N. Demirkıran, G. D. T. Özdemir)……………………………………………………………………….307
115- PRODUCTION OF ZNO FROM THE RESULTING AQUEOUS SOLUTION AFTER DISSOLUTION OF METALLIC ZINC INSPENT ZINC CARBON BATTERIES (N. Demirkıran, M. Dardağan, G. D. T. Özdemir)………….………………………………..315
116- ASSESSMENT OF ANXIETY DISORDER BY EGG RESPONSE (M. F. Karakaş, F. Latifoğlu, E. Demirci)…………….321
119- NATURAL FREQUENCY ANALYSIS OF LAMINATED COMPOSITE BEAMS WITH MULTIPLE OPEN TRANSVERSECRACKS (V. Kahya, S. Karaca, F. Y. Okur, A. C. Altunışık, M. Aslan)……..……………………………………………………….327
127- EFFECT OF OXIDANTS ON PHOTOCATALYTIC ACTIVITY OF TIO2 NANOTUBES (Ö. E. Kartal, H. Karakurt)……….335
130- THE DIELECTRIC CHARACTERIZATION OF THE SIO2-MWCNT BETWEEN THE METAL AND SEMICONDUCTOR (I.Orak, A. Koçyiğit..............................................................................................................................................…………………..341
135- MODELING AND CONTROL OF SWITCHED RELUCTANCE GENERATOR (C. Cevahir, Z. Omaç)……………………...347
140- GENETIC PROGRAMMING IDENTIFIER FOR MULTI-CLASS PATTERNED CLASSIFICATION PROBLEM (S. Arslan, C.Öztürk)………………………………………...……………………………………………………………………………………………..355
143- COMPARISON OF THE HISTOLOGICAL EFFECTS OF NANO CERAMIC SCALPEL AND STEEL SCALPEL ON WOUNDHEALING IN RAT MODEL (F. Ada, E. Gümüş)………………………………………………………………………………………….362
144- EXTRACTION KINETICS OF CU (II) IONS FROM LEACH SOLUTIONS WITH ACORGA M5640 (M. K. Tanaydın, N.Demirkıran)…………………………………………………………………………………………………………………………….……365
147- MECHANICAL AND PHYSICAL PROPERTIES OF SELF-COMPACTING CONCRETE PRODUCED WITH GLASSPOWDER (S. Cemalgil, S. Etli, O. Onat)…………………………………………………………………………………………………371
149- PREDICTION AND VERIFICATION OF COMPRESSIVE STRENGTH OF HISTORICAL MASONRY STRUCTURES WITHARTIFICIAL NEURAL NETWORK (O. Onat, B. Yön)…….…………………………………………………………………………….377
155- EFFECTS OF MADIMAK (POLYGONUM COGNATUM MEISSN) ON THE MICROBIOLOGICAL, CHEMICAL ANDSENSORIAL QUALITIES OF THE MEATBALL (M. G. Saraç, E. Hastaoğlu)………………………...……………………………..384
160- TECHNOLOGICAL RESEARCH OF ZINC EXTRACTION FROM ELAZIĞ SIMITSONITE ORE (H. Nizamoğlu, M. D. Turan, Z. A. Sarı, A. Demiraslan)………………………………………………………………………………………………………………….391
161- HCl LEACHING OF COPPER OXALATE OBTAINED FROM CHALCOPYRITE CONCENTRATE (M. D. Turan, Z. A. Sarı, A. Demiraslan, H. Nizamoğlu, T. Depci, M. Erdemoğlu)………………………………………………………………..………...…395
Chapter 3
163- LED / IRLED COMPONENTS AND APPLICATION EXAMPLE USED IN MEDICAL SYSTEMS (A. Aytekin, I. Kıyak)…………………………………………………………………………………………………………………………………….….399
164- ILLUMINATION DESIGN OF EDUCATIONAL ENVIRONMENT WITH EFFICIENT LIGHTING LUMINARIES (A. Spor, I. Kıyak)…………………………………………………………………………………………………………………………………………408
168- INVESTIGATION OF THE IMPACT OF LENO BUILD ON BURST STRENGTH IN WOVEN FABRICS (B. B. Kastacı, H. Z. Özek)…………………………………………………………………………………………………………………………………………417
171- DETOXIFICATION OF FORMALDEHYDE IN WASTEWATERS (E. Yiğit, E. Tosun, A. Baysar).………………………..423
172- INVESTIGATION OF TRIBOLOGICAL PROPERTIES OF MULTILAYER COATED COCRMO ALLOY (N. Çakır, A. K. Aslan, E. Bahçe, M. S. Güler)…………………………………………………………………………………………………………….428
173- A DIFFERENT APPROACH FOR MANUFACTURING OF BEVEL GEARS WITH END MILL ON CNC MILLING MACHINE (C. Özel, E. Bahçe, D. Karman)……………………………….…………………………………………………………………………..437
174- EXPERIMENTAL INVESTIGATION OF THE EFFECT OF MACHINING PARAMETERS ON OSTEONECROSIS IN BONE DRILLING (M. Can, S. Koluaçık, E. Bahçe, E. Emir)……………….…………………………………………………………………..445
175- FINITE ELEMENT ANALYZE OF THE EFFECT OF SETTING IMPLANTS AT VARIABLE ANGLES ON MANDIBULAR BONE (E. Bahçe, Ç. Aktaş, E. Emir, E. Sarıgül)……………………………………………………………………………………….453
176- LINEAR DYNAMIC ANALYSIS OF A MASONRY ARCH BRIDGE (A. Özmen, E. Sayın)…………………………………..…………………………………………………………………………………………………….458
177- ENVIRONMENTAL ASPECT OF URBAN REGENERATION APPLICATIONS, THE CASE OF NİĞDE (A. Bozdağ, Ö. B. Gökçek, S. S. Durduran)………………………………………………………………………………………………………………….465
178- ANALYSIS OF NOISE LEVELS IN UNIVERSITY CAMPUS AREAS WITH THE HELP OF GIS (Ö.B. Gökçek, A. Bozdağ, S. S. Durduran)…………………………………………………………………………………………………………………………….473
179- AN OVERVIEW OF DEVELOPMENTS IN BIO-RADAR APPLICATIONS (İ. Şeflek, Y. E. Acar, E. Yaldız)…………….479
181- LEACHING KINETICS OF COPPER BLENDED SLAG ASSISTED ULTRASOUND (Z. A. Sarı, M. D. Turan, H. Nizamoğlu, A. Demiraslan)………………………………..……………………………………………………………………………………………485
185- EXPERIMENTAL STUDY ON THE EFFECTS OF CONDENSER AND EVAPORATOR AIR FLOW RATES IN AN AUTOMOTIVE AIR CONDITIONING SYSTEM (A. Alkan, A. Kolip, M. Hoşöz)…….……………………………………………….489
186- MECHANICAL AND THERMAL INSULATION PROPERTIES OF LIGHTWEIGHT MORTARS WITH PERLITE (V. Akyüncü, A.B. Kizilkanat, N. Kabay)…….……………………………………………………………………………………………497
187- PHYSICAL AND MECHANICAL PROPERTIES OF CEMENT BASED COATING MATERIALS (N. Kabay, V. Akyüncü, A. B. Kızılkanat, Ö. U. Aktaş)…………………………………………………………………………………………………………...…….504
189- IMPROVING RELIABILITY AND OPERATIONAL FLEXIBILITY CAPACITIES IN CASE OF STRATEGIC EXTENSION OF EREĞLİ-II SUBSTATION IN TURKEY (N. Pamuk)…………………………………………………………….……………………….512
191- MINIMIZATION OF ELECTRICAL POWER SYSTEM VOLTAGE DISTORTION USING FUZZY LOGIC CONTROLLER (N. Pamuk)………………………...……………………………………………………………………………………………………………..526
193- AUGMENTATION OF HEAT TRANSFER BY NOVEL VORTEX GENERATORS AND VISUALIZATION OF THE FLOW WITH PIV (M. Doğan, A. A. Igci)…………………………………………………………………………………………………………..537
197- COMPARATIVE EXPERIMENTAL INVESTIGATION OF THERMAL CONDUCTIVITIES OF AL2O3-DISTILLED WATER AND TIO2-DISTILLED WATER NANOFLUIDS (M. Gökçek, S. Öcal, C. Kale)…………………………………………………….545
199- INVESTIGATION OF STRENGTH PROPERTIES OF CLAY/PUMICE MIXTURES MODIFIED WITH A BIOPOLYMER (Z. N. K. Albayrak, G. Gencer)…………………………………...……………………………………………………………………………551
200- AN EXPERİMENTAL STUDY ON HUMIC ACID EXTRACTION FROM ARGUVAN (MALATYA) LIGNITE (M. Birinci, K. Şentürk)………………………………………………………………………………………………………………………...……………559
201- PRE-BENEFICATION OF HIGH SILICA BAUXITE ORE BY ATTRITION-SCRUBBING (M. Birinci, R. Gök, H. Gülaçan)……………………………………………………………………………………………………………………………………..565
204- INVESTIGATION OF INVESTIGATION OF ENERGY QUALITY ON MGS UNDER HIGH PENETRATION OF PV GENERATION (D. B. U. Celimli, A. A. Kulaksız, A. Onen)…………………………………………………………………………..570
205- CONTROLLING THE DISTRIBUTED ENERGY RESOURCES USING SMART GRID STANDARDS (D. B. U. Celimli, H. Dogan, Y. Torun, S. KOcakanat)…………………………………………………………………………………………………………578
209- USE OF WASTE MARBLE: ARCHITECTURAL CONCRETE (E. T. Tunc, K. E. Alyamac)……………….…………………586
213- DETERMINATION OF LOS ANGELES ABRASION LOSS OF THE BASALT AGGREGATE TYPE OF ELAZIĞ PROVINCE (E. T. Tunc)…………………………………………………………………….…………………………………………………………….595
216- CREATING HYDROXYAPATITE BY HYDROTHERMAL METHOD IN TI6AL4V ALLOY SURFACE (K. Yaman, N. Ozdemir)……….…………………………………………………………………………………………………………………………….603
218- THE EFFECT OF TIO2 NANOPARTICLES ON THERMAL PROPERTIES OF R-32 AND CO2 REFRIGERANTS (A. Yıldız, M. A. Ersöz, R. Yıldırım)…………………………………………….…………………………………………………………………….611
219- A MATHEMATICAL MODEL FOR OPTIMUM INSULATION THICKNESS IN PIPES (M. A. Ersöz, A. Yıldız, R. Yıldırım)………………………………………………………………………………………………………………………………………618
Chapter 4
220- INVESTIGATION OF USAGE OF RED BEETROOT AND BLACK CARROT EXTRACTS IN EMULSIFYING MEAT PRODUCTS (Ö. P. Can, E. Hastaoğlu, H. Vural, A. S. Özmen)……………………………………………………………………..622
221- A STUDY ON THE COMPARISON OF TURKISH ISLAMIC ARCHITECTURAL LIGHTING PROPERTIES WITH MODERN ARCHITECTURAL LIGHTING: SULEYMANIYE MOSQUE (A. Demirci, O. Akar, U. K. Terzi)..................................................627
222- THE IMPACT OF GRID-CONNECTED DISTRIBUTED POWER GENERATION SYSTEMS ON POWER QUALITY (O. Akar, U.K. Terzi, E. Dursun, O. Ozgonenel, A. Demirci)…………………………………………………………………………………….635
223- EXPERIMENTAL COMPARISON OF DRYING OF APPLES IN A DRYING SYSTEM IN WHICH A HEAT PIPE SOLAR COLLECTOR AND A HEAT PUMP DRYING SYSTEM ARE USED TOGETHER (H. Dogan, H. Budagov)…….……………….643
224- COMPLEX DYNAMICS TO THE COMPRESSIONAL DISPERSIVE ALFVÉN WAVES IN (1+1) DIMENSIONS (H. M. Baskonus)...................................................................................................................................................................................652
225- NEW NONLINEAR MODEL FOR THE KAUP'S HIGHER ORDER WATER-WAVE EQUATION (H. M. Baskonus).……………………………………………..………………………………………………………………………………….660
229- EVALUATION OF MACHINE LEARNING-BASED SCHEMES BY USING INTEGRATED AHP-VIKOR METHOD: A CASE STUDY IN DETERMINATION OF BREAST CANCER PROGNOSIS (M. G. Pamuk, I. Atacak)…………………………………667
230- OPERATIONAL MODAL ANALYSIS OF ALUMINUM MODEL STRUCTURES USING EARTHQUAKE SIMULATOR (A. Dushimimana, F. Günday, S. Tuhta)…………………………………………………………………………………………………..677
231- ANALYTICAL AND EXPERIMENTAL MODAL ANALYSIS OF A MODEL STEEL STRUCTURE USING BLAST EXCITATION (F. Günday, A. Dushimimana, S. Tuhta)…………………………..…………………………………………………686
235- INVESTIGATION OF CUTTING TOOL WEARS AND CUTTING FORCES DURING WEAR IN MACHINING OF GGG 90 DUCTILE CAST IRON USED AS CRANK SHAFT (H. Koçak, G. Uzun)……………………………………………………………695
236- A REINFORCEMENT LEARNING APPROACH IN HOME ENVIRONMENT USING PYTHON (Z. Pala)…………………701
240- FORECASTING LOW FREQUENCY ELECTROMAGNETIC FIELDS VALUES TIME SERIES USING PYTHON (Z. Pala, İ. H. Ünlük, Ç. Şahin)……………………………………………………………………………………………………………………..706
241- EXPERIMENTAL INVESTIGATION OF ALUMINIUM ELECTRODE MACHINABILITY PERFORMANCE BY ELECTRO DISCHARGE MACHINING (A. Kalyon)……………………………………………………………………………….………………..710
242- THE EFFECT OF WELDING SPEED ON THE MICROSTRUCTURE PROPERTIES OF ROBOTIC LASER WELDED FERRITIC SAINLESS STEEL (C. Köse, C. Topal)………………………………………………………………………………….717
243- INVESTIGATION OF MECHANICAL PROPERTIES OF ROBOTIC LASER WELDED FERRITIC STAINLESS STEEL (C. Köse, C. Topal)……………………………………………………………………………………………..………………………….….723
244- ANALYSIS OF RADIO FREQUENCY ELECTROMAGNETIC WAVES OF COMPACT FLOURESCENT LAMPS FOR ONE DIMENSION PLANE (Y. Tanış, İ. Koşalay)…………………………………………………………………………………….727
248- NUMERICAL INVESTIGATION OF HEAT TRANSFER PERFORMANCE OF AL2O3-WATER NANOFLUID IN A CIRCULAR PIPE (E. Işık, V. Tuğan)………………………………………………………………………………………………....…735
249- CONVERSION POWER OF A CRYSTALLINE VERTICAL PARALLEL SILICON SOLAR CELL WITH ELECTRICAL PARAMETERS (G. Şahin)………...……………………………………………………………………………………………………..744
250- A RESEARCH ABOUT THE EFFECTS OF THE NITRIDING METHODS ON THE HOT WORKING TOOL STEEL (S. Tabak, T. Demirel)………………………………………………………………………………………………………………………...754
255- AWARENESS ANALYSIS ON OCCUPATIONAL HEALTH AND SAFETY IN THE CONSTRUCTION SECTOR: SAMPLE OF MEDITERRANEAN AND BLACK SEA REGIONS (M. Akgül, Y. Doğan)…….………………………………………………..763
257- A NOVEL PLANAR DUAL BAND MONOPOLE ANTENNA DESIGN FOR WEARABLE SMART GLASSES (M.H.Nisanci)……………………………………………………………………………………………………….………………..……770
258- OCCUPATIONAL HEALTH AND SAFETY AWARENESS ANALYSIS IN THE CONSTRUCTION SECTOR OF UNIVERSITY STUDENTS IN EASTERN ANATOLIA AND SOUTHEAST ANATOLIA (M. Akgül, Y. Doğan)……………………………………………………………………………………………………………………………………..778
260- EFFECTS OF NA2SO4.10H2O ON MARBLE GLOSSINESS (F. P. Güzel, D. E. Sarıcı, N. Kızılkaya, E. Özdemir)….785
262- ON CLASSIFICATION OF NEWS DOCUMENTS IN TURKISH (A. K. Uysal)………………………………………………..792
263- A CONCEPT DESIGN FOR THE SOLAR-POWERED PONTOON (A. Kilic, U.C. Karabulut, L. Bilgili, O. Sert……………………………………………………………………………………………………………………......………………..799
264- ANALYSIS OF RADIO FREQUENCY ELECTROMAGNETIC WAVES OF COMPACT FLOURESCENT LAMPS FOR THREE DIMENSIONAL PLANE (Y. Tanış, İ. Koşalay)………………….……………………………………………………………807
265- A REVIEW ON CONTROL SYSTEMS USED IN COMMERCIAL VESSELS (E. Güneş, A. Kılıç, C. Taş, M. A. Bahçe, O. Sert)…………………………………………………………………………………………………………………………………………814
268- INVESTIGATION OF THE EFFECT OF NGO-PEG-DOX DRUG SYSTEMS ON MDA-MB-231 CELLS (A. Taş, N. K. Çakmak, E. Gümüş, M. Atabey, Y. Siliğ)………………………………………………………………………………………………822
270- ANALYSIS OF THE DISCONTINUOUS CONTACT PROBLEM OF A HOMOGENEOUS LAYER BY USING FINITE ELEMENT METHOD (A. Polat, T. Ş. Özşahin, Y. Kaya)…………………..…………………………………………………………827
273- WATER FLOW WINDOW CONCEPT: AN OVERVIEW (H. İ. Yamaç, A. Koca)……………………………………………834
274- NUMERICAL ANALYSIS ON PHASE CHANGE MATERIALS USED IN THERMAL ENERGY STORAGE TANK (H. İ. Yamaç, A. Koca)……………………….....………………………………………………………………………………………………841
277- INVESTIGATION OF CHARGE AND DISCHARGE CHARACTERISTICS OF DIFFERENT BATTERY TYPES ON HYBRID VEHICLE MODEL( Y. E. Ekici, N. Tan)………………………………………………………………………………………848
278- DESIGN AND ANALYSIS OF SMALL DIMENSIONAL MAGNETICS NUANCED TRANSFORMER (K. Kartaca, T. Abbasov)……………………………………………………………………………………………………………………………..……856
279- EFFECT OF LASER POWER ON MICROSTRUCTURAL PROPERTIES OF TITANIUM ALLOY COMBINED WITH ND: YAG LASER Source (C. Köse, E. Karaca)…………………………………………….………………………………………………864
280- EFFECT OF HEAT TREATMENT CONDITIONS ON MICROSTRUCTURAL PROPERTIES OF TITANIUM ALLOY COMBINED WITH ND: YAG LASER SOURCE (C. Kose, E. Karaca)………………………………………………………..……869
281- ANTI-CANCER ACTIVITY OF DOXORUBICIN LOADED TIO2 TARGETED DRUG DELIVERY SYSTEMS ON HUMAN NEUROBLASTOMA CELL LINE (A. Taş, N. K. Çakmak, E. Gümüş, Ü. Özüm, Y. Siliğ)…………………..…………………….874
Chapter 5
282- ANTIMICROBIAL EFFECT OF OLIVE LEAF PRODUCTS OF EXTRACTED FROM DIFFERENT VARIETY OF OLIVE LEAVES ON ESCHERICHIA COLI O157:H7 AND SALMONELLA TYPHIMURIUM (S. Topuz, M. Bayram)……………….…880
283- EFFECTS OF OAK CHIPS ADDITION ON THE INDIVIDUAL PHENOLIC COMPOUNDS OF GRAPE VINEGAR IN MATURATION PROCESS (M. Bayram, S. Topuz, C. Kaya)………………………………………………………………………885
286- RAPIDLY-EXPLORING RANDOM TREE AND ARTIFICIAL BEE COLONY ALGORITHM FOR AUTONOMOUS ROBOTS OPTIMUM PATH PLANNING (Y. Torun, Z. Ergül, N. Alpkıray)……………………………………………………………………891
287- WIRELESS NETWORKS AND COMPUTER VISION BASED PARK SYSTEM IN SMART CITIES (A. Sener, E. Gonultas)………………….……………………………………………………………………………………………………………….898
288- DESIGN OF FIELD ORIENTED CONTROL BASED INDUSTRY ROBOT FOR MARBLE INDUSTRY (Y. Torun, A. Öztürk, B. Özgün)…………………………………………………………………………………………….……………………………………902
289- A LITERATURE REVIEW ON THE ELECTRICITY MARKET SIMULATORS (O. Altuntaş, B. Oral)……………………909
290- A SIMULATOR STUDY ON LEARNING ABOUT OPERATION OF TURKISH ELECTRICITY MARKET (O. Altuntaş, B. Oral)……………………………………………………………………………………………………………………………………...…917
293- SITE AMPLIFICATION OF TWO STRONG-MOTION RECORDING STATIONS IN ITALY: GUBBIO-PIANA (SOFT SOIL) AND FORGARIA CORNINO (STIFF SOIL) (M. A. Sandıkkaya)……………………………………………………………………..925
294- A THEORETICAL APPROACH TO THE CHEMICAL PROPERTIES OF THE ACTIVE INGREDIENTS IN BASIL (OCCUM BASILLICUM L.) (F. Gökalp)……………………………………………………………….…………………………………………..930
295- THE EFFECT OF THE ACTIVE INGREDIENTS OF CORIANDER SPP. (CORIANDRUM SATIVUM L.) ON THE COLON CANCER (F. Gökalp)…………………………………….………………………………………………………………………………934
297- NUMERICAL INVESTIGATION OF THE STARTING BEHAVIOUR OF H-TYPE VERTICAL AXIS WIND TURBINE WITH DIFFERENT AIRFOILS (Y. Çelik, M. N. Kaya)………...……………………………………………………………………………....938
298- VERTICAL AXIS WIND TURBINES FOR TURKEY: OVERVIEW TO APPLICATION OPPORTUNITIES (M. N. Kaya, Y. Çelik)………………………………………………………………………………………………………………………………………..947
301- INVERTASE IMMOBILIZATION ONTO NOVEL POLI (ACRYLAMIDE-GALL) COMPOSITE (C. Hepokur)……………..953
302- UPDATING CADASTRE INFORMATION (3402-22/A): THE CASE OF ANTALYA PROVINCE ALANYA DISTRICT (D. O. Kocaman, İ. Buğdaycı, S.S. Durduran, T. Özcan, A. Bozdağ)………………………………….………………………………959
303- REAL ESTATE VALUATION WITH GEOGRAPHICAL INFORMATION SYSTEMS: THE CASE OF ANTALYAPROVINCE MURATPAŞA DISTRICT (T. Özcan, T. K. Aydın, A. Bozdağ, U. Örs, S. S. Durduran)………………………..…..964
304- YEAR-AHEAD WIND SPEED FORECASTING USING A CLUSTERING-STATISTICAL HYBRID METHOD (A. S. Dokuz,H. Demolli, M. Gökcek, A. Ecemis)……………………………………………………………………………………………………..971
305- SOME PROPERTIES OF MARMELATE PRODUCED FROM WHITE AND BLACK MULBERRY (C. Kaya, S. Topuz, M.Bayram)…………………………………………………………………………………………………………………………………....976
306- GAMMA (Ɣ) RADIATION ABSORPTION AND SOME MECHANICAL AND PHYSICAL PROPERTIES OF BORAXPENTAHYDRATE CONCRETES (Y. Esen, M. V. Çiçek)……………………………………………………………………………..983
307- ONTOLOGICAL REPRESENTATION OF HETEROGENEOUS SENSOR DATA (M. Milli, Ö. Aktaş, E. Unsal, D. Gezgin,M. Kahveci, K. Baysarı)…………………………………………………………………..……………………………………………..988
309- MICROSTRUCTURE STUDIES OF ST 52 COATED WITH STELLITES BY TIG METHOD (Z. Balalan, I. Kirik, O. Ekinci,M. Kılıç)……………………………………………………………………………………………………………………………………997
310- COATING HARDOX 450 STEEL WITH DIFFERENT STELLITE COATINGS VIA TIG METHOD (I. Kirik, Z. Balalan, O.Ekinci, M. Yaz)…………………………………………………………………………………………………………………………...1003
312- THE EFFECT OF DIFFERENT FLOW RATES ON THE CALCITE PERCENTAGE AND SEEPAGE RATE INBIOLOGICAL IMPROVEMENT OF SOILS (H. Akoğuz, S. Çelik, Ö. Barış)…………………………………………………….1011
316- IMPROVING SOFTWARE DEVELOPMENT PROCESSES USING SEMANTIC WEB TECHNOLOGIES (M. Milli, E.Unsal, M. Milli, Ö. Aktaş)…………………………………………………………………………………………………………….…1017
319- A NEW GREENHOUSE MONITORING SYSTEM BASED ON INTERNET OF THINGS TECHNOLOGY (E. Unsal, A. F.Yelkuvan, M. Taşbaşı, Ö. Sönmez)…………………………………………………………………………………………..……..1025
320- THE EFFECTS ON ENGINE EMISSION PARAMETERS OF THE USES OF CANOLA OIL METHYL ESTER ASBIODIESEL FUEL IN A SINGLE-CYLINDER DIESEL ENGINE (T. Yüksel, İ. Temizer)………………………………………..1032
324- COMPUTER ASSISTED SENSORY TRANSFORMATION AND PERCEPTION EXTENSION SYSTEM (S. Koçkanat, E.Ünsal, P. Tütüncü, E. Kopuz, S. Esen)……………………………………………………………………………………………….1039
325- ANALYSIS OF LAKE LEVEL VARIATION IN TIME-SCALE DOMAIN AND APPLICATION FOR TUZ LAKE (T. M.Cengiz)………………………………………………………………………………………………………………………….………..1045
326- INVESTIGATION OF SUGAR BEET BASED CEZER PRODUCTION OPPORTUNITIES (C. Kaya, E. E. Yucel, M.Bayram, S. Topuz)………………………………………………………………………………………………………………………1053
327- HOMOGENEITY ANALYSIS OF PRECIPITATION OVERLAKE THE GREAT LAKES REGION (T.M. Cengiz)………1061
Chapter 6
331- A LITERATURE REVIEW ON ELECTRONIC NOSE TECHNOLOGY FOR DIAGNOSIS OF DISEASES (F. Yelken, Ç. Acı)………………………………………………………………………………………………………………….……………………1069
334- COOLING PREFABRICATED PLACE WITH PHASE CHANGING MATERIAL (H. Esen, A. C. Kuloğlu, M. Gürtürk, C. Kale)……………………………………………………………………………………………………………………………………….1075
335- INVESTIGATION OF RENEWABLE ENERGY SOURCED HYBRID DRYING SYSTEM FOR MEDICAL AND AROMATIC PLANTS (A. Kecebas, M. Erturk)……………………………………………………………………………………………………..1082
336- THE USE OF OPTIMUM INSULATION THICKNESS IN BUILDING EXTERIOR WALLS TO REDUCE GREENHOUSE GAS EMISSIONS: AFYONKARAHISAR EXAMPLE (M. Erturk, A. Kecebas)…………………………………………………1088
340- INVESTIGATION OF WEAR BEHAVIOR OF WC COVERED STEELS BY ESD METHOD (Y. Kayalı, Ş. Talaş)……………………………………………………………………………………………………………………………………...1098
341- BALLISTIC PERFORMANCE OF ESD COATED STEEL PLATES (Ş. Talaş, Y. Kayalı)…………………………….….1104
342- PTA WELDING OF AISI 420 MARTENSITIC STAINLESS STEEL BY USING FILLER METAL (N. Özdemir, O. Yiğit, M. Güner, T. S. Şeker)………………..……………………………………………………………………………………………………1109
343- INVESTIGATION ENERGY CHANGE OF INDOOR TEMPERATURE FOR COOLING PURPOSE FOR AFYONKARAHISAR PROVINCE (E. Işık, M. Ertürk)……………………………………………………………………………....1116
344- INVESTIGATION OF THE IMPACT OF LENO BUILD ON TEAR STRENGTH IN WOVEN FABRICS (B. B. Kastacı)…1122
348- ADVANCED HIGH STRENGTH STEELS (AHSSS): THE PAST, PRESENT AND FUTURE (M. Eroğlu)……………….1128
351- EXPERIMENTAL MODAL TESTING OF A HISTORICAL CLOCK TOWER (F. Y. Okur, A. F. Genç, M. Günaydın, A. C. Altunışık)………………………………………………..………………………………………………………………………………..1137
352- VIBRATION CHARACTERISTICS OF HISTORICAL MASONRY MUSEUM (A. F. Genç, F. Y. Okur, M. Günaydın, A. C. Altunışık)…………………………………………………………………………………………………………………………………1145
352- VIBRATION CHARACTERISTICS OF HISTORICAL MASONRY MUSEUM (A. F. Genç, F. Y. Okur, M. Günaydın, A. C. Altunışık)…………………………………………………………………………………………………………………………………1145
355- EXPERIMENTAL TEST OF A PEM FUEL CELL-BATTERY HYBRID POWER SYSTEM IN THE ABSENCE AND PRESENCE OF POWER MANAGEMENT (H.Sahin, H. Esen)…………………………………….………………………………1152
358- FUZZY OPTIMIZATION OF THE SPACE TRUSS SYSTEMS WITH Α-LEVEL-CUT APPROACH (Ö. Keleşoğlu, Y. Esen)…………………………………….…………………………………………………………………………………………..……1157
359- SEISMIC BEHAVIOR OF A HISTORICAL MASONRY ARCH BRIDGE UNDER DIFFERENT EARTHQUAKE LEVELS (E.Sayın, M. Karaton)………………………………………………………………………………………………………………………1168
360- INVESTIGATION OF TOPOGRAPHIC EFFECT IN GCP SELECTION IN UAV PHOTOGRAMMETRY: GAZIANTEP/NIZIP (H. S. Kapicioglu, K. O. Hastaoglu, F. Poyraz, Y. Gul)……………………………………………………………………...1174
361- USE OF WHEY IN KEFIR PRODUCTION (O. P. Can)…………………………………………………………………………1179
362- ENKAPSULATION OF BLACK CARROT (DAUCUS CAROTA L.) ANTHOCYANINS BY USING IONIC GELATION (S.G. Mazlum, Z. Seyfikli, M. Okurkan)……………………………………………………………………..……………………………1182
363- COMPARISON OF ANTHOCYANIN DEGRADATION BETWEEN BERBERIS (BERBERIS CRATAEGINA)ANTHOCYANIN RICHED EXTRACT AND ANTHOCYANIN RICHED ENCAPSULS (S. G. Mazlum, Z. Seyfikli, M.Okurkan)………………………………………………………………………………………………………………………………….1192
365- BRAKE PADS AND MATERIALS FEATURES USED IN AUTOMOBILE BRAKES (F. Karaca, I. Can, A.Kapicioglu)………………………………………………………………………………………………………………………….……1198
367- THE IMPORTANCE OF CANDIDA SPECIES BIOFILMS ON ANTIFUNGAL RESISTANCE (U. Tutar)…………………1205
368- COMPARISON OF SUPERVISED AND UNSUPERVISED LEARNING BASED 3D SEGMENTATION METHODS (E.Sert)……………………………………………………………………………………………………………………………………….1209
371- STRUCTURAL BEHAVIOUR OF RC STRUCTURES STRENGTHENED WITH PRESTRESSED CFRP LAMINATES (J.Sena-Cruz, L.Correia)……………………………….………………………………………………………………………………….1213
292- INVESTIGATION OF LOADS APPLIED TO FLEXIBLE PIPELINES HAVING LINEAR ELASTIC BEHAVIOR WITHDIFFERENT METHODS (M. Tunc, E. Sayin, M. Karaton, M. E. Emiroglu)………………………………………………………1223
349- A MODEL FOR DEVELOPMENT OF COUNTRY ON THE BASIS OF INNOVATION; GOVERNMENT-UNIVERSITY-INDUSTRY COOPERATION (GUIC) (M. Simsir)…………………………………………………………………………………...1231
350- USING OF METAL COATED DIAMOND IN DESIGN OF SEGMENT USED IN NATURAL STONE SAWING PROCESS(H. Subutay, M. Simsir)…………………………………………………………………………………………………………………1238
369- STUDY OF SOUND PROPERTIES OF HDPE / SIS POLYMER COMPOSITES (S. Ersoy, Y. Boztoprak)…………...1246
372- INVESTIGATION OF INDUSTRIAL AND ORGANIZATIONAL PSYCHOLOGY(S. Ersoy, O. Ulkir, Y. Bozkurt)........1251
124- REMOTE SENSING AND GIS TECHNOLOGIES IN THE CONSERVATION OF CULTURAL HERITAGE (A. G. Kucukkaya,P. Karakus)…………………………………………………………………...……………………………………………………………1257
373- 3-D VELOCITY STRUCTURE OF ÇAMELI REGION AND ITS RELATION TO SEISMICITY (F. Akar, Ö. Bektaş, A. Pınar ).....................…………………………………………………………………...……………………………………………………………1261
374- BIOGAS PRODUCTION AND A NEW CONCEPT DESIGN IN FERMENTATION OF CHICKEN MANURE WITH VARIOUS CEREAL WASTES (F. Aslan, H. Esen…………………………………………………………………..….1192