irrigation-mart buyers guide
DESCRIPTION
Published 2015TRANSCRIPT
Buyer’s Guide
A FULL SERVICE IRRIGATION, WASTE WATER, & DRAINAGE SYSTEMS SOURCE
w w w . i r r i g a t i o n - m a r t . c o m
2
MAX Flow Rate VS. Pipe Size
FLOW (GPM) Pipe Size
2 1/2”
4 3/4”
8 1”
15 1-1/4”
20 1-1/2”
40 2”
60 2-1/2”
90 3”
180 4”
440 6”
750 8”
1150 10”
1500 12”
Contents
INTR
ODUC
TION
& IN
FORM
ATIO
N
Irrigation-Mart was established in 1978 and incorporated in 1989 as Robbins Association/Irrigation-Mart Inc. We are a closely-held
company with approximately 30 well-trained employees, including certified irrigation designers, agronomists, landscape horticulturalists, agriculturists, and registered professional engineers. We stock irrigation and related products from well over 200 manufacturers in our 2 acre warehouse. This ensures that orders can be shipped in a timely manner to customers worldwide via UPS, FedEx, USPS, and motor freight. We service the United States, Mexico, and Central and South America. In addition to being a full-line irrigation dealership, we offer plasticulture equipment and some farm implements. We offer complete system design, including operation recommendations. Our strength comes from our in-depth understanding or “SAVVY” of irrigation and related technologies.
Introduction & Information 2-3Kits 4-5Drip Irrigation 6-7Micro Sprinklers & Jets 8-9Ag Sprinklers & Hard Hose Travelers 10Hose, Pipe, & Fittings 11-13Pumps & Power Units 14-15Filters & Injectors 16Soil Moisture 17
Fertilizers & Ag Chemicals 18Valves & Components 19-20Geotextiles 21Plasticulture 22-24Tools & Equipment 24Controllers & Accessories 25Drainage & Hardscapes 26Bill of Rights, Sales Terms, Directions 27Contact Information & Map Back
8 0 0 - S A Y - R A I N
3
Maximum Wire Lengths Controller to 24 VAC Valve
Gauge Length
18 1020
16 1630
14 2590
12 4120
Conversion Table1 Acre 43,560 sq ft (208.7 ft X 208.7 ft)
1 Mile 5,280 ft
1 Acre Inch 27,154 gal (~30,000 gal)
1 Acre Inch/Hour 453 GPM (~450 GPM)
1 Inch/Week 2.7 GPM per acre (~3 GPM per acre) continuously
0.11 Inch/Hour 50 GPM per acre
1 Gallon 231 cu. in. (0.1337 cu. ft.)
1 Cubic Foot 7.48 gal
1 Gallon (water) 8.33 lbs
1 Foot (water) 0.433 PSI (100 ft = 43.3 PSI)
1 PSI 2.31 ft of water (10 PSI = 23.1 ft)
1 Atmosphere (sea level) 14.7 PSI (34 ft of water)
1 horsepower 33,000 ft-lb/min = 0.746 KW = 746 W
Pump HP GPM x total head (ft) ÷ [3960 x pump efficiency (decimal)]
INTRODUCTION & INFORMATION
What you need to know about your irrigation systemTotal Dynamic Head or Pressure• Sum of the (1) elevation from the surface
of the water source to the discharge point, (2) friction loss, and (3) system pressure requirements
• To convert pressure (PSI) to elevation (feet), use:
1 PSI = 2.31 ft (of water) 1 ft = 0.433 PSI
Line Size• Based on flow rate (see table on page 2)
Flow Rate Required• Gallons per minute (GPM) or per hour (GPH)
for the largest zone(s)• Crops require about 2 inches per week
at peak usage. This requires an irrigation system that will apply no less than 6 GPM for every acre under production. Depending on location and crop, 2 inches per week would be applied by operating continuously at this flow rate; grass requires ~ 1 inch per week.
Power Source• Gas, diesel, tractor, single or
3-phase AC, battery, solar, etc.
Water Source• Pond, lake, stream, well,
community/municipal supply• Delivery or recharge rates
Friction Loss (PSI per 100 FT) for Class 160 PVC Pipe based on diameter vs GPM (Shaded area not recommended; velocity over 5 FPS) 2 4 6 8 10 20 30 40 50 60 70 80 90 100 120 140 160 180 200 250 300 350 400 450 500 550
1” 0.06 0.23 0.49 0.84 1.27 4.59
1-1/2” 0.01 0.04 0.08 0.13 0.20 0.71 1.5 2.56 3.88
2” 0 0.01 0.03 0.04 0.07 0.24 0.51 0.86 1.31 1.83 2.44
3” 0 0 0 0.01 0.01 0.04 0.08 0.13 0.20 0.28 0.37 0.47 0.59 0.72 1.01 1.34 1.71
4” 0 0 0 0 0 0.01 0.02 0.04 0.06 0.08 0.11 0.14 0.17 0.21 0.30 0.39 0.50 0.63 0.76 1.15 1.61
6” 0 0 0 0 0 0 0 0.01 0.01 0.01 0.02 0.02 0.03 0.03 0.05 0.06 0.08 0.10 0.12 0.18 0.25 0.33 0.42 0.52 0.63 0.76
Precipitation Rate EquationApplication Rate (Inches Per Hour) = 96.3 x Q
Area
• 96.3 = Constant to convert GPM per sq. ft. to inches/hour
• Q = Flow rate of all emission devices in irrigated area in GPM
• Area = Irrigated area in sq. ft.
Motor Rating Minimum Copper Wire SizeVolts HP KW 14 12 10 8 6 4 3 2 1 0 00 000 0000
115 1/2 0.37 100 160 250 390 620 960 1190 1460 1780 2160 2630 3140 3770
230
1/2 0.37 400 650 1020 1610 2510 3880 4810 5880 7170 8720
3/4 0.55 300 480 760 1200 1870 2890 3580 4370 5330 6470 7870 9380
1 0.75 250 400 630 990 1540 2380 2960 3610 4410 5360 6520 7780 9350
1-1/2 1.1 190 310 480 770 1200 1870 2320 2850 3500 4280 5240 6300 7620
2 1.5 150 250 390 620 970 1530 1910 2360 2930 3620 4480 5470 6700
3 2.2 120 190 300 470 750 1190 1490 1850 2320 2890 3610 4470 5550
5 3.7 0 110 180 280 450 710 890 1110 1390 1740 2170 2680 3330
7-1/2 5.5 0 0 120 200 310 490 610 750 930 1140 1410 1720 2100
10 7.5 0 0 0 160 250 390 490 600 750 930 1160 1430 1760
15 11 0 0 0 0 170 270 340 430 530 660 820 1020 1260
Helpful Charts/Tables/Information
Pump Motor Wire Guide
w w w . i r r i g a t i o n - m a r t . c o m
4
KITS
GK100-RV
GK1000-RV
GK2000-RV
GK4000-RV
GK1000
GK2000
GK4000
Includes 100 ft of drip tubing (pre-installed emitters) and fittings (valves included) for up to 5 rows
Includes 1000 ft of drip tape and fittings (valves included) for up to 10 rows
Includes 2000 ft of drip tape and fittings (valves included) for up to 20 rows
Includes 4000 ft of drip tape and fittings (valves included) for up to 40 rows
Includes 1000 ft of drip tape and fittings for up to 10 rows
Includes 2000 ft of drip tape and fittings for up to 20 rows
Includes 4000 ft of drip tape and fittings for up to 40 rows
All of Irrigation-Mart’s kits come with full assembly and operation instructions. For customization, information, or assistance, please call 800-SAY-RAIN (729-7246) to speak with our staff.
Hose End/Figure 8 Closure: Slide closure onto hose. Fold hose over; fit end of hose through other side of closure.
8 0 0 - S A Y - R A I N
5
KITS
ORCHARD KIT-S ORCHARD KIT-M ORCHARD KIT-L
KIT-MIST KIT-SS
KIT-MIST-LPD KIT-FOG
Includes 100 ft of LLDPE poly hose and 25 drip emitters
Includes 500 ft of LLDPE poly hose and 50 drip emitters
Includes 1000 ft of LLDPE poly hose and 100 drip emitters
Includes 100 ft of LLDPE poly hose, controller, and 15 misters
Includes 100 ft of LLDPE poly hose and 50 spray stakes
Includes 100 ft of LLDPE poly hose, controller, and 15 misters with LPDs
Includes 100 ft of LLDPE poly hose and 16 foggers
Mist/Propagation Kits• Includes all basic kit parts: controller, electric/manual control valve, control wire, and timer• Options include: leak prevention devices (LPD) to prevent system drain down; manual control;
hanging tubes and weights; injectors; flow meters; sensors; pressure gauges; and more• Kits are modular and may be customized
KIT-SMART ACAn Irrigation-Mart original, the Smart-AC kit is an automatic misting kit for air conditioning units. The foggers of the kit spray a fine mist of water into the air. The evaporating water cools the air passing across the AC condensing coils. The standard kit includes an electric valve and two fogger assemblies; other options available.
w w w . i r r i g a t i o n - m a r t . c o m
6
DRIP
IRRI
GATIO
N
Flow Rates Vs. Recommended Maximum Run Lengths for 5/8” Tape @ 8 PSI on 0% SlopeSpacing 4” 8” LF 8” HF 12” LF 12” MF 12” HF 16” LF 16” HF 24”
Flow Rate (GPM) per 100 ft 1 0.34 0.67 0.22 0.34 0.45 0.17 0.34 0.28
Max Run (ft) 250 550 350 700 600 450 900 600 650
Irrigation-Mart stocks a wide range of thicknesses, outlet spacings, and flow rates. We also custom design systems and provide operation guidance. For assistance with custom designs, please call our experienced sales staff.
Thickness (mil)
Flow Rates (GPH)
Emitter Spacing (Inches)
4, 5, 6, 8, 10, 12, 13, 15
0.13, 0.17, 0.20, 0.22, 0.24, 0.26, 0.27, 0.36, 0.37
4, 8, 12, 16, 24
Toro
Jain Rivulis
Netafim• Streamline - Seamless, molded emitter,
seasonal application• Typhoon - Multi-season application, popular
SDI product, 5/8” through 1-3/8” diameter• Dripnet PC - True Pressure Compensation,
multi-season application, wide pressure range
• Aqua Traxx - Seamless, continual flow path, seasonal application
• Aqua Traxx FC - Potential for better uniformity, controls flow on hilly terrain
• Chapin BTF - Seamed, seasonal application, turbulent flow pattern
• Chapin Deluxe - Seamed, continual filtration channel
• Cascade - Seamless, molded emitter, widest range of flow rates
• T-Tape - Seasonal application, turbulent flow, seamed, large filter
• Ro Drip - Seasonal application, thin mil, expanding flow channel
*Bold numbers indicate items Irrigation-Mart stocks; others may be ordered upon request
8 0 0 - S A Y - R A I N
7
DRIP IRRIGATION
Drip line is available in multiple emission rates from 0.16 GPH to 2 GPH. Irrigation-Mart stocks drip line in many configurations.
Additional Optional AccessoriesAngle and Straight Tubing Stakes, for
securing the distribution tubing into place and directly applying irrigation to a subsurface area
Polyvinyl Flex Tubing, for Multiple Outlet Drippers (MOD) and hanging assemblies; small, flexible, transfer tubing
Toro Netafim
Netafim WPCJ (barb outlet)
Toro NGE(nipple outlet)Antelco AgriDrip Toro E2 Toro TurboKey
• Blue Line PC - Raised inlets to reduce plugging, self-flushing diaphragm
• Blue Line Classic- Non-PC, low profile emitter lowers friction loss; discharge rates vary with pressure
• DripNet PC - Large filtration area
• UniRam PC - Economical PC option, designed for poor water applications
• Triton - Non-PC, wideflow pattern for clog resistance
Blank Poly Tubing (for use
with on-line emitters or as header line)
Irrigation-Mart offers many other options and brands. For product-specific technical information, please visit our website. Call for customized recommendations and designs.
Another option is on-line emitters that are manually installed on blank hose. Available in non-pressure-compensating or pressure-compensating (PC). They also may include the CNL feature, which prevents “leak-down” after the irrigation cycle ends; the emitter opens at approximately 10 PSI, and will close near 3 PSI. Available from 0.3 GPH to 6.6 GPH.
Netafim WPCJ (nipple outlet)
w w w . i r r i g a t i o n - m a r t . c o m
8
MICR
O SP
RINK
LERS
& JE
TS
Jain - Modular Group• Modular Components• Upright or Inverted• 9.2 - 79.3 GPH flow rate @ 30 PSI• 2.6 - 34.4 ft wetted diameter• 4/7” Barb, Quick Thread, 1/2” MPT,
3/8” MPT with adapters• May be configured as jet or mister
Toro• Upright, with hanging hook• 7.9 - 72.8 GPH flow rate @ 20 PSI• 15.7 - 36.8 ft wetted diameter• 3/8” MPT• Optional removable tabs to
increase throw distance• Available in PC
Irrigation-Mart offers many other options and brands. For product-specific technical information, please visit our website. Call for customized recommendations and designs.
Netafim SuperNet• Upright, with hanging hook• 5.3 - 50 GPH flow rate @ 25 PSI• 2.3 - 29.5 ft wetted diameter• Barb, Quick Connect Thread, 3/8” MPT• Available in PC
Nelson Rotator Series• Slow rotation for greater throw distances• Upright; some can be inverted• 9 - 126 GPH flow rate @ 25-50 PSI• 14 - 64 ft wetted diameter• 1/2” MNPT, 3/8” MNPT with
adapters, Quick Change, Female Acme connection
• Available with pressure regulation & drain prevention
8 0 0 - S A Y - R A I N
9
MICRO SPRINKLERS & JETSJain• Upright• 6 - 24 GPH flow rate @ 20 PSI• Eighteen spray patterns available• Quick thread connection
Toro Snap-Jet• 6 - 24 GPH flow rate @ 20 PSI• Eight spray patterns available• Quick thread connection• Improved easy grip snap fit deflector
plate for easy pattern change and maintenance
Irrigation-Mart offers many other options and brands. For product-specific technical information, please visit our website. Call for customized recommendations and designs.
Netafim NetJet• Pre-assembled; Upright• 6 - 20 GPH flow rate @ 15 PSI• Seven spray patterns available• Quick Thread connection• Removable stream deflector to restrict
spray diameter while tree is young
• High distribution uniformity• Propagation, humidification, cooling• 40 - 60 PSI operating pressure• 1.8, 3.6, & 5.4 GPH flow rate• Anti-leak device (hanging system)• Requires only 150 mesh filtration
• Modular components• Low operating pressure (<30 PSI) means
lower cost of operation• 7.9 GPH flow rate• Anti-leak device (hanging system)• Requires only 150 mesh filtration• Great for propagation, humidification,
and cooling
• No run-off (prevents waste); precise application of water and chemicals
• Great for use with top-dressing fertilizers• Optional pressure regulating assembly• 3 - 15 GPH flow rates available
Maxijet• Some modular units; Upright or
inverted• 9 - 126 GPH flow rate @ 25-50 PSI• Multiple spray patterns available;
fan spray option• Quick thread connection• Tree clip configuration available
Micro Jets
Misters Foggers
Spray Stakes
Single Piece Jets
Spot-Spitter
w w w . i r r i g a t i o n - m a r t . c o m
10
AG S
PRIN
KLER
S &
HARD
HOS
E TRA
VELE
RS
Kifco® Water Reels
Wobbler Sprinklers
Large Volume Sprinklers
Sprinkler Accessories
Impact Sprinklers
Nelson Rotator SprinklersConstructed of high-impact grade thermoplastic, the Wobbler gives high uniformity at low pressures. It is also ideal for frost protection, fighting wind, irrigation, limiting evaporation, and providing 360° coverage at all times. Available in low flow mini-wobbler and low vibration X-cell wobbler.
Kifco’s Water Reels are hard hose travelers that are versatile, mobile, and easy to use. Used to irrigate crops, water gardens, maintain athletic and sports fields, suppress dust, dispose of slurry waste, and to beautify commercial or residential property. Kifco has a portable, reliable, simple, and affordable Water-Reel to meet any need. Water reels may operate unattended, can be adapted to multiple environments, have variable pull speeds, and can be tailored to specific application requirements. Irrigation-Mart carries many sizes and types of Kifco’s Water Reels, ranging in flow rates, operating pressures, hose lengths (280 ft - 1320 ft), and hose diameters (1” - 4”). Irrigation-Mart offers customized system designs.
Nelson’s line offers highly uniform distribution patterns, reduced cost, low maintenance requirements, and lessened riser vibration. A modular design, the Rotator can be easily customized to the specific requirements of your orchard, vineyard, or field.
Ideal for use in large fields, lumber and log yards, wastewater distribution systems, and with hard hose travelers. Irrigation-Mart carries brand names such as Komet’s Twin series and Nelson’s Big Guns.
Komet Twin Max Part Circle
Senninger Plastic Sprinklers
Rain Bird (Brass)
Maxibird Part Circle
Webstermatic Quick-Coupling Valve
Bolt-On Shield w/Log Adapter
Sprinkler Stand
Quick Coupler
Key
429 Part Circle
T200S B110
Irrigation-Mart stocks all the accessories you’ll need for your sprinkler system, including risers, shields, valves, quick keys, swivels, and stands.
Irrigation-Mart carries pop-up & rotor sprinklers in multiple sizes, lengths, spray patterns, and flow rates.
Turf Sprinklers
MF3
8 0 0 - S A Y - R A I N
11
HOSE, PIPE, & FITTINGS
Aluminum Pipe Fittings
Cam-Loc Fittings
Line Tee
Type A(CLMxFPT)
Type B(CLFxMPT)
Type C(CLFxI)
Type D(CLFxFPT)
Type DC(CL CAP)
Type DP(CL PLUG)
Type E(CLMxI)
Type F(CLMxMPT)
Type AA(CLMxCLM)
Type DA(CLFxCLM)
Band Line Tee Line Reducer
For quick and easy hose connections. Available in Aluminum, Poly, Brass, and Stainless Steel.
Plug
Valve Opening Elbow
Valve Stub 90° Elbow
90° Elbow
45° Elbow
45° Elbow Insert Adapter Insert Adapter (male)
Line Reducer Insert Adapter End Plug Ring Lock Clamp
Hook & Latch Assembly
Ring-Lock Assembly
Lever-Loc & Pin Lug Fittings
Male w/Lever (MPT)
Female x MPT Female Shank Male Shank EPDM Gasket Pin Lug Coupler
Locking Lever
Used on suction and discharge hoses to make quick, leak-proof, air-tight connections.
w w w . i r r i g a t i o n - m a r t . c o m
12
HOSE
, PIP
E, &
FITTIN
GS
Hose Clamps
Hose-Loc Fittings
Coupler
Poly Ratchet
Female Hose Adapter
Pinch T-Bolt
Elbow
Rod
Tee
Spiral Bolt Double Bolt
Male Hose Adapter
Gear Drive
Used to secure hoses to barb/insert fittings.
Reusable, easy to install, no tools required. Used with LLDPE hose.
Loc-Eze Fittings
Tape Loc Fittings
Miscellaneous Fittings
For use on poly hose or drip line. Available in 10mm, 15mm, or 16mm.
For use on drip tape.
Varied; for use on drip tape, drip hose, layflat, or LLDPE supply hose.
Coupler
Coupler
Layflat Rubber Plug
FHS Adapter
Male Pipe Thread
Greenback Ball Valve
MHT Adapter
Male Hose Thread
Varied Barb Fittings
End Cap Auto Flush End
Elbow
Elbow
Auto Drain
Tee
Tee
Barbed Coupler
Supply Tube Adapter
(compression)
MPT Adapter
Female Hose Swivel
PVC Pipe Grommet
Coupler with Valve
Tee x Slip
Barbed Tee
PVC/Tubing Adapter
End with Auto Flush
Valve
Tee x FHS
PVC Adapter
(glueable)
Mistake Hole Plug
Barb Adapter
with Valve
Layflat Adapter
Drip Tape End Sleeve
Male Pipe Thread with
Valve
Elbow x Slip
Supply Tube Adapter
End Cap
End Cap
Compression Fittings
Coupler Female Hose Adapter
End Fitting Elbow Tee Compression Adapter(glueable)
End with Auto Flush Valve
Used to transition from PVC to LLDPE, or for making hose fittings from PVC fittings.
Fitting Series
Acceptable I.D. Wall Thickness
50 0.500” - 0.580” 0.035” - 0.055”
55 0.520” - 0.620” 0.045” - 0.055”
60 0.580” - 0.675” 0.025” - 0.055”
70 0.665” - 0.765” 0.035” - 0.055”
80 0.790” - 0.845” 0.045” - 0.065”
100 1.035” - 1.075” 0.062” - 0.075”
8 0 0 - S A Y - R A I N
13
PVC Insert Fittings
PVC Fittings & Accessories
Metal Fittings
Coupler Tee Elbow Cross
Cross
Cutters
Plug Union
Union
Glue Applicator
Bushing
Glue (IPS)
Red. Tee
Glue (Spears)
Red. Coup
Primer
Red. CouplerInsert Coupler KC Nipple Nipple
Coupler
Coupler
Saddle
Tee
Tee
Threaded Tee
Cap
SCH 80 Nipple
Elbow
90° Elbow
Red. Elbow
45° Elbow
Red. Adapter
Socket x Barb(glueable)
Spigot x Barb(glueable)
Red. Coupler Plug
Male Adapter
Expansion Coupler
Male Adapter
Female Adapter
Repair Coupler
Female Adapter
Used to plumb hose, transition from hose to other system components.
Glueable and threaded. Available in SCH 40, SCH 80, and fabricated IPS & PIP.
Malleables. Use to plumb pipes or other components where stress or heat is high. Galvanized or black steel available.
HOSE, PIPE, & FITTINGS
Accessories Varied; for use with drip tape, drip hose, layflat, or LLDPE supply hose.
Layflat Insertion
Tool
AgLok™
Layflat Hole Punch
H-Curls (Secures hose
to trellis)
Drip Clip(For hanging supply hose)
“Top Hat” Grommet
Hose Stake (Holds tubing in position)
Supply Hose Hole Punch
Staple/Stake
Figure 8 Hose End Enclosure
Step Bit (Used to drill
holes in PVC Pipe)
Hose Wire Tie Tool (Used to
secure hose/tape and barb fittings)
“H” Grommet
Grommet Installation
Installing Layflat Adapter1
1
2
23
3
4
Irrigation-Mart offers many other options and brands. For product-specific technical information, please visit our website. Call for customized recommendations and designs.
w w w . i r r i g a t i o n - m a r t . c o m
14
PUMP
S &
POW
ER U
NITS
Manufacturer & Series Drive Options Power
(HP) In x Out Flow Rate Range (GPM)
Pressure Range (PSI)
Goulds Irri-Gator
Electric, 115/230V 1PH
3/4 - 3 1-1/2” x 1-1/2” 20 - 110 20 - 40
Sta-RiteD Series
Electric, 130/230V 1PH 230/460V 3PH
3 - 5 1-1/2” - 2-1/2” 120 - 220 Up to 75
Munro LP Series
Electric, 115/230V 1PH 230/460V 3PH
3/4 - 5 1-1/2” - 3” 18 - 155 20 - 75
FranklinWSP Series
Electric, 115/230V 1PH
3/4 - 2 2” x 1-1/2” 12 - 90 10 - 50
BerkeleyB Series
Electric, 230V 1PH 230/460V 3PH
Up to 200 1” - 10” Up to 5000 Up to 250
BerkeleyB Series
SAE/Frame Up to 200 1” - 10” Up to 5000 Up to 250
CornellW, Y, R, H Series
Electric, 230V 1PH 230/460V 3PH
Up to 350 1” - 10” Up to 7000 Up to 250
CornellW, Y, R, H Series
SAE/Frame Up to 350 1” - 10” Up to 7000 Up to 250
CaprariWater Series
540/1000/2000 RPM 10 - 90 2” - 8” 50 - 1400 40 - 140
CaprariSlurry Series
540/1000/2000 RPM 30 - 150 6” x 4” 200 - 800 70 - 230
Self-
Prim
ing
Elect
ricPT
OEn
d Su
ctio
n
Series
8 0 0 - S A Y - R A I N
15
PUMPS & POWER UNITS
Manufacturer & Series Drive Options Power
(HP) In x Out Flow Rate Range (GPM)
Pressure Range (PSI)
MunroPOND Series
Electric, 110V 1PH 1/7 - 1/3 5/8” - 1-1/4” 21 - 47 10 - 15
FranklinLittle Giant
Electric, 230V 1PH 230/460V 3PH
1/4 - 1 1” - 2” Up to 150 Up to 30
FranklinWater Horse
Electric, 115/230V 1PH 230/460V 3PH
1/2 - 125 2” - 6” 5 - 1000 40 - 250
StaRite BerkeleyElectric, 115/230V 1PH 280/460V 3PH
1/2 - 200 2” - 8” 5 - 1900 40 - 250
Franklin ElectricFACGF Series
Gasoline - Honda or Briggs & Stratton
5-1/2 - 18 2” - 2” Up to 250 Up to 110
Franklin Electric FNSGF Series
Gasoline - Honda or Briggs & Stratton
5-1/2 - 9 2” - 2-1/2” Up to 150 Up to 90
Subaru Robin Gasoline 1 - 9 1” - 4” Up to 350 Up to 40
Franklin ElectricFBSGF Series
Gasoline - Honda or Briggs & Stratton
3-1/2 - 9 2” - 3” Up to 300 Up to 45
John Deere / Isuzu
Diesel 75 - 600 1” - 10” Up to 7000 Up to 250
Sum
pEn
gine
-Driv
enSu
bmer
sible
Series
Pump Accessories
Pumps (continued)
Generators & Power Units
ProtekHand Primer
Control Panel Float Valve
Exhaust Primer
Cycle Stop Valve
Manifold Primer
Pressure Tanks
Irrigation-Mart offers multiple types, brands, and sizes of generators. Please visit our website for more listings; contact us for customized recommendations.
Katolight PTO Robin RGD Series Robin RGV Series Winco WL Series Winco W Series Winco Tri-FuelPowered by tractor (minimum 35 HP)
Wheeled off-road transport trailer
25kW 1PH; 135kW 3PH
4-Stroke Diesel Air-Cooled Engine
Electric starter; low noise level
AC Out: 110/220/240VDC Out: 12V
4-Cycle Gasoline Air-Cooled Engine
Recoil starter; low noise level
AC Out: 120/240VDC Out: 12V
Gasoline Engine (5-6 HP; Honda or B&S)
Electric starter; 7-9 hour runtime
AC Out: 120/240V 1PH
Gasoline Engine (Honda, Yanmar, B&S)
High temp insulation; fuel & noise efficient
120/240V 1PH
Gasoline/LP Gas/Natural Gas
Easy fuel switching; Honda or B&S engine
120/240V 1PH
w w w . i r r i g a t i o n - m a r t . c o m
16
FILTE
RS &
INJE
CTOR
S
8 0 0 - S A Y - R A I N
17
SOIL MOISTURE
Irrometer
Sentek EnviroSCAN Probe
PureSense Field Stations
Irrigation-Mart stocks and ships Irrometer’s complete line of products, including sensors, meters, tensiometers, and monitors.
Tensiometers - available in multiple lengths. Some models have replaceable tips. Resistant to chemicals and damage from electrolysis. Leak-proof.
Sensors - Fully solid state. Will not dissolve in
soil. No maintenance required. Automatically
compensates for varying salinity levels. Inexpensive and easy to use.
Digital Meters - Converts electrical
resistance of sensor to soil moisture
content. Accurate, stable, portable, convenient. One meter reads all
sensors. Uses one 9V battery.
Continuously measures soil moisture content and salinity
(to track movement of fertilizers) at multiple
depths.
Uses EnviroSCAN probes plus other
sensors for weather reports and irrigation
data. The many different sensors
deployed allows a grower and advisor to build a complete picture of growing
conditions that can be used to help create
the optimal growing environment.
w w w . i r r i g a t i o n - m a r t . c o m
18
FERT
ILIZE
RS &
AG
CHEM
ICAL
S
Water SolubleUltraSol™
YaraVita™MultiCote™
Liquid
YaraMila™Multi-K™
Super Rainbow™
YaraLiva™• Calcium Nitrate• Fully water soluble• Fuels high quality, fast-
acting growth; helps reduce plant stress and disease
• Fully water soluble• Macro- and micro-
nutrient packages available
• Specialty types available for specific crop needs
• 10-5-40 Finisher• 20-20-20 Feed• 15-5-19 Blueberry• 30-10-10 Hi-N• 10-52-8 Starter
• Specific nutrient mix (including micro nutrients)
• Either water soluble or liquid
• Easy, safe, convenient
• Controlled-release (dry)• Minimal leaching,
no contamination of groundwater or dependence on irrigation
• Multiple series for nurseries, acrigulture, and turf
• 4-0-24 Finisher• 10-10-10 Feed• 6-24-6 Starter• Calcium• Boron
• NPK (Nitrogen, Phosphate, Potassium) and micro nutrients
• Granular or pill• Highly efficient;
accurate and balanced
• Potassium Nitrate• Fully water soluble• Non-volatile; efficiently
absorbed by plants
• Granulated (dry)• Customized mixes
available for specific crop needs
• Uniform spread, homogenous product
Yara North America Miller
Haifa Chemicals Ltd.
SQM
Agrium
8 0 0 - S A Y - R A I N
19
VALVES & COMPONENTS
Air Vents (Air Vacuum Relief Valves)
Foot Valves & Suction Screens
Check Valves & Backflow Preventers
Manual Valves
Automatic/Hydraulic Valves
Size based on system flow rate.AVR’s help prevent back siphoning, air pockets, collapsing lines, water hammer, and other problems associated with air in irrigation systems.
Size based on system flow rate and water quality.Foot valves are screened to protect pumps from large items and to keep pumps primed.
Size based on system flow rate.Used to protect water supplies and prevent backflow in irrigation systems at pump stations, filters, and injectors.
Size based on system flow rate.
Size based on system flow rate.Used throughout water systems to provide control.
Kinetic Continuous ComboExhausts air at system start-up; allows air into system at shut-down.
Exhausts air at system start-up and continues automatic air relief during operation; allows air into the system at shut-down. Venting not as quick as for other types.
Exhausts large volumes of air at system start-up and during operation; allows air into system at shut-down.
Plastic Aluminum
Connection Styles: Threaded, Glue, Flange, and Compression (OD Pipe).
Body Material: Stainless Steel, Cast Iron, PVC, Aluminum, or Brass.
Custom options: Self-cleaning screens, self-cleaning foot valves, multiple sizes of screen mesh.
Round Screen
PVC Check Valve
Frost-Free Hydrant
Standard Electric
Wafer Check Valve (Split-
Disc)
Butterfly(Lever or Gear)
Threaded Nylon
Chemigation Check Valve
(flanged)
Brass Ball (FPT)
PVC
Pressure Vacuum Breaker Backflow
Preventer
Gate (FPT)
Threaded Iron
Double-Check Assembly Backflow Preventer
PVC Ball (FPT or Socket)
Grooved Iron
Poly Ball
Flanged Iron
Cast Iron PVC Aluminum Self-Clean
Activation styles: Electric Solenoid (AC/DC), motor (AC/DC), and Hydraulic or Pressure.
Control options: On-Off, pressure reducing/sustaining/relief, surge anticipating, back flush, auto control.
Connection styles: Threaded, Glue (PVC), Grooved, Flanged.
w w w . i r r i g a t i o n - m a r t . c o m
20
VALV
ES &
COM
PONE
NTS
Pressure Gauges & Instruments
Flow Meters
Pressure Regulators
Pressure Relief Valves
Used to monitor pressure in irrigation systems. All pressure gauges sold by Irrigation-Mart are lead-free and available in multiple ranges.
Used to measure flow rate and total flow (GPM and Gallons). Many styles available. Range from 0.3 - 2500 GPM. Typically requires straight pipe for 10 x pipe diameter before meter and 5 x pipe diameter after meter.
Used to reduce pressure to a set value. Assures application uniformity and system protection, even if source pressure fluctuates or terrain is uneven. System pressure must be greater than desired operating pressure. Ranges from 0.1 - 175 GPM.
Used to quickly discharge water to relieve excess pressure on a system. Generally installed after a pumping station to prevent damage. Most models are adjustable; multiple sizes and optional side discharge are available. Ranges from 0 - 235 PSI.
Non-liquid filled (Dry)
Quick Relief Valve
M-Series McCrometer
DG50 Series
Liquid filled
Bronze (1” - 2”)
WT Series
PRL
Foot Clip
Bronze (1/2” - 3/4”)
IRT Series
PMR
Schrader Valve
PR600 (Large)
F-300 Series McCrometer (Saddle)
Netafim Octave Ultrasonic
2-Port (Netafim)
Schrader CapBrass Adapter (gauge not included) Pocket Gauge Gauge Stake Assembly
AA-60D (Large)
4-Port (Netafim) 6-Port (Netafim) 10-Port (Netafim)
8 0 0 - S A Y - R A I N
21
GEOTEXTILES
Woven Ground Cover
Frost Protection Row Covers
Shade Cloth
Silt Fencing
Double Net Straw Blankets & Erosion Control Mats
Deer Fencing & Bird Netting
• Guide stripes to help with plant alignment• Keeps weeds out; permeable by air and
water• Resists tearing and puncturing• UV stabilized for long life• Tree Squares available (3ft & 4ft)• Staples used to secure edges
• Protection from frost, freezing temperatures, & insects• Lengthens growing season• Aids in preventing wind & rain damage• UV stabilized; resists tearing; reusable• Custom sizes available• Lays directly over hoops or on plants• Sandbags used to secure edges
• 0.5 oz - 2 to 4 degree protection, transmits 95% light• 1.0 oz - 4 to 6 degree protection, transmits 70% light• 1.5 oz - 6 to 8 degree protection, transmits 50% light• 2.0 oz - 8 degree protection, transmits 30% light
• Shades sensitive plants, livestock, and pets; helps to provide wind and erosion control
• Light blocking percentages available (ranging from 30% - 90%)• Different colors available (black, white, aluminet, etc.)• UV stabilized to hold up under solar radiation• Used as anti-insect and anti-pest nets
• Erosion control for residential and commercial construction sites• Available with or without stakes, in 100 ft rolls• Bottom 6” should be buried to prevent sediment from escaping• Stakes are 42” tall, spaced 8 ft• Stakes should be placed on downside of slope• Can be joined for longer runs
• Used in low-flow channels and on moderate slopes• Stitched and bound with photodegradable polypropylene netting• Consists of 100% agricultural straw fiber• Netting has openings of 3/8” x 3/8”• Degrades in +/- 1 year• 8 ft x 112.5 ft rolls (100 sq yd)
• Polyethylene mesh netting• Safe, humane alternative to wire• Discourages animals from destroying gardens and vegetation• UV stabilized to hold up under solar radiation• Attaches easily to metal or wooden stakes• Many sizes available
Staples available in multiple quantities
w w w . i r r i g a t i o n - m a r t . c o m
22
PLAS
TICUL
TURE
Wooden Stakes
Tomato Twine
• Treated Honduran Pine; may be used for multiple seasons• Dense, tight-grain wood to prevent warping• Multiple lengths and sizes, ranging from 3 ft - 6 ft tall and from 0.75” - 1.25” thick• Bundles of 25; pallet quantities depend on size of stakes• Recommended spacing: 3 ft - 4 ft, depending on stake size and crop requirements
• High, dependable tensile strengths• Minimum stretch, excellent uniformity• UV stabilized for field use• Resistant to rot, mildew, and insects• Smooth and easy on the plant• Easy to work with; holds knots well• Loop slots for attaching to belt for easy dispensing
A typical row of tomatoes using stakes and twine
looks like the diagram to the right. Stakes are placed
every 3 - 4 ft, and the twine is wrapped on alternating
sides of the stakes, supporting the plant on
either side. Additional lines of twine at higher levels
may be added later to help support the plant as it
grows.
Note: Plastic Mulch, Wooden Stakes, and Tomato Twine are items seasonally in high
demand. While Irrigation-Mart tries to keep them in stock, items can go on backorder when demand is high. Please allow plenty of time for ordering and shipping. Call our experienced sales staff for availability or
custom orders.
8 0 0 - S A Y - R A I N
23
PLASTICULTURE
2600 Series II Raised-Bed Mulch Layer
Rain-Flo Plasticulture Equipment2550 Series II
Raised-Bed Mulch Layer
345 Series II Flat-Bed Mulch Layer
1800 Mulch Lifter
1600 Series II Water Wheel Transplanter
1200 Series II Water Wheel Transplanter
2400 MiniRaised-Bed Mulch Layer
• Min: 64” bed centers; 70HP FWD• Adjustable bed height 5” - 9”• Lays 3 ft - 5 ft wide mulch• Operator seat; poly-lined bed
press• Adjustable row markers• Spring-loaded shovels on sides loosen soil for cover disk• Options include drip tape roll carriers; crowned bed; Auto
Ro-Trak• Cat II
• Min: 60” bed centers; 60HP FWD• Adjustable bed height 3” - 7”• Lays 3 ft - 4 ft wide mulch• Operator seat; poly-lined bed
press• Adjustable row markers• Spring-loaded shovels on sides loosen soil for cover disk• Options include drip tape roll carriers; crowned bed; Auto
Ro-Trak• Cat II
• Lays 3 ft - 5 ft wide mulch• Poly-lined bed press• Adjustable row markers• Extra plastic roll carrier; full
open back for fast reloading• Compact design; Cat I hitch• Large independent disk and press
wheels• Independent leveling blade helps eliminate low spots in beds
• Min: 55HP FWD• Lifts 3 ft - 5 ft wide plastic mulch• Lifting plows use Case LH 18”
“Deep-Suck” Shares• Two spring-loaded vine cutting
disks• Removable center disk• Heavy shanks have 5/8” safety
shear bolts• Auto-reset is optional
• Min: 58” bed centers; 40HP FWD• Adjustable bed height 3” - 5”• Lays 4 ft wide mulch• Poly-lined bed press• Adjustable tension brake on
plastic roll carriers• Compact for high tunnels; Cat I & II hitch• Includes water tank to allow weight of layer to be adjusted
• Plants beds spaced 60” or greater
• Row spacing 8” - 36”• Up to 25 tray carrying capacity; plants up to
4 rows per pass• Two operator seats• Two 80-gallon tanks; positioned so driver
can see riders• Quick-change planting wheel setup• Will plant on flat or raised beds• Large tires with highway bearings; Cat II
3-point hitch; field ready
• Cat I/Cat II• Two 50-gallon tanks• Up to 15 tray carrying capacity;
plants up to 2 rows at a time• Quick change water wheel setup• Two adjustable operator seats• Best for smaller fields and high
tunnels
w w w . i r r i g a t i o n - m a r t . c o m
24
PLAS
TICUL
TURE
TOOL
S &
EQUI
PMEN
T
SL43 Flat-Bed Mulch Layer RB436 Raised-Bed Mulch Layer
RB448 Raised-Bed Mulch Layer
Mechanical TransplanterEquipment
Ag Sprayers
Hose Unroller
LIF250 Mulch Wrapper
• Adjustable spring tension• Lays 3 ft - 4 ft wide mulch• Easily removable drag for laying
plastic over sweet corn• 3” roller and 16” rubber tire
press wheels keep plastic under constant pressure (uniform and tightly-laid mulch)
• 3 point hookup• Extra roll carrier enables carry of two 4000 ft rolls of plastic
• Min: 25-30HP• 4” high, 20” wide bed• Lays 3 ft wide mulch• Crowned bed (higher in center)• Teflon-lined bed; smooth,
pressed seed bed and no pot holes• Adjustable tension on roll; independent
spring-loaded press wheels; dirt shields optional
• Independent spring-loaded cover disks; fully adjustable
• Min: 30-35HP• 4” high, 20” - 30” wide bed• Lays 3 ft - 4 ft wide mulch• Crowned bed (higher in center)• Teflon-lined bed; smooth, pressed
seed bed and no pot holes• Adjustable tension on roll;
independent spring-loaded press wheels; dirt shields standard• Independent spring-loaded cover disks; fully adjustable
• 24” wide reel• Holds up to 1200 ft plastic tape/
mulch• Hydraulic control• Removable end plate
Nolt’s Plasticulture Equipment
Irrigation-Mart stocks a variety of tools to help you get the job done. Call our sales staff or visit our website for availability and sizes.
Some tools may also
be rented. Please call for more
info.
All-metal wheelbarrows; available in single or double wheel, smooth or knobby tires.
8 0 0 - S A Y - R A I N
25
CONTROLLERS & ACCESSORIES
Irrigation Controllers
DC Controllers
Misting/Propagation Controllers
2-Wire or 2-Conductor AC Controllers
Faucet/Hose End Timers
Accessories
• Power options: AC / DC• Most use either a non-volatile memory or a battery back-up to maintain
programs in the event of power outage• Can control other system components (chemical injectors, fans, filter
backwash cycles, landscape lighting, pumps, etc. Some may require the use of relays)
• Sensor controlled options: Photo cells, flow meters, thermostats, rain sensors, soil moisture sensors, freeze sensors, etc.
• Timed controlled options: Stations with multiple start times, run times (minutes and hours), multiple programs, stacked/non-stacked programs
• Indoor and outdoor models.
• Power Options: Can retrofit existing AC valves/systems; great for remote systems that do not have a reliable AC source nearby
• Multiple start times, run times, and programs available• Some can be used with sensors for greater control• Available in multiple or single station models• Typically batteries last a full season
• Power Options: AC / DC• Loop feature with daily start/stop time• Sensor ports for greater control• Short cycles (minutes) and run times (seconds)
• Power Option: AC (2-Wire, with decoder)• Cost reduction; only one 2-conductor wire required for all stations; typically used for
12-station or larger systems; requires a decoder at each zone valve• Easy to install; uses less wire; reduces digging/trenching, fewer things to pull through conduit• Effortless expansion and changes, since the controller does not have to be re-wired when
modifying the system (simply connect a 2-conductor cable anywhere to the existing cable)• Can reach great distances (i.e., can turn on valves up to ten miles away)• Simple to repair; should wire sustain damage, simply reconnect two wires to restore function
• Power Options: Battery operated / Mechanical timer (no battery)• Battery operated models allow unattended operation for extended
periods• Allows multiple irrigation cycles per day or week• Accessories available to complement the system• Inexpensive; simple installation and operation; easy to program
Smart Line 1600
Pro Line 1600
Netafim NMC Jr
2-Wire Decoder
Tucor RKD
Orbit (mechanical)
Rain Sensor
Weather Monitor
Wire & Accessories
Valve Locator
Solenoid
Two-Dial DC (battery) 4-button DC (battery)
Smart Wire
Jr Max (Indoor/Outdoor versions available)
Superior Control’s Mistmaster K-Rain 2200 Series
Digital DC (2-Wire)
Digital DC with valve
Digital DC with solenoid
w w w . i r r i g a t i o n - m a r t . c o m
26
DRAI
NAGE
& H
ARDS
CAPE
S
Steel Landscape Edging
Drainage
Hardscapes
Irrigation-Mart offers a full line of drainage products including high density polyethylene (HDPE) pipe, steel and plastic/composite channel grates, and drainage basins for consumer and commercial applications.
Irrigation-Mart is a proud distributor of Belgard Hardscapes, Versa-Lok Retaining Wall Systems, Col-Met Steel Landscape Edging, and Vista Professional Outdoor Lighting. Call our experienced sales staff for styles, pricing, and availability.
Drainage Basins: Used to collect surface water and carry it to a discharge point. Available in different inlet/outlet options, colors, and styles.
Irrigation-Mart stocks multiple sizes and lengths of drainage culverts.Call for availability and custom recommendations. Oversized items; limited delivery options.
Channel Grates: Used to collect surface water around pools, driveways, yards, etc. Available in different inlet/outlet options, sizes (widths and lengths), colors, and styles. Decorative colors and styles available.
8 0 0 - S A Y - R A I N
27
Irrigation-Mart’s Conditions of SalesTerms of Payment:
• Terms are NET DUE ON DELIVERY/RECEIPT. Methods of payment accepted are Credit Cards (Visa, MasterCard, American Express, Discover), Check/ACH, Money Order, C.O.D., and Cash. A late payment fee of 2% per month will apply to all past due accounts. There will be a $25 charge on all returned checks.
Warranty: • We strive to supply high quality merchandise to our customers. However, no warranty, expressed or implied, is made by Irrigation-Mart or its employees other than that of the
manufacturer. Return Merchandise:
• A Return Goods Authorization Number (RGA Number) must be obtained prior to returning product. A Restocking Fee of 20% is charged on all returned items. Freight:
• All pricing is FOB Ruston, LA, or other place of origin, unless otherwise arranged. Material damaged in freight must be noted at time of delivery. It is the responsibility of the receiver to file the damage claim with the freight company.
Applicable Law: • The laws of Ruston, Lincoln Parish, and the state of Louisiana will prevail in all dealings and situations over any actions stated above.
Directions to our location in Ruston, Louisiana:From Shreveport on I-20 E:• Take Exit 85 (Ruston/
Dubach).• Merge onto S Service Road
E (cross Trenton/Vienna streets).
• Take first right turn.
From Monroe on I-20 W:• Take Exit 85 (Ruston/Dubach).
Merge onto N Service Road W (cross Vienna St).
• Take left onto Trenton St (second light).
• Take left onto S Service Road E (cross Vienna St).
• Take first right turn.
From Jonesboro on U.S. Hwy 167 N:• Drive through
downtown Ruston.• Take right onto S
Service Road E (signs for I-20 E to Monroe)
• Take first right turn.
From Dubach on U.S. Hwy 167 S:• Cross I-20.• Take left onto S
Service Road E (signs for I-20 E to Monroe; cross Vienna St).
• Take first right turn.
Bill of Rights: Please discuss the following with your irrigation provider.
200 South Service Road EastRuston, LA 71270-3442
Office: 800-729-7246 (318) 255-1832
Fax: (318) 255-7572Visit us on our website:
www.irrigation-mart.com
Jackie W.D. Robbins
Robin Robbins
Jay Robbins
Michael Pippen
Founder Ph.D., P.E. (LA), CID, TSP, CAC
Vice PresidentCCA (LA), SA (LA)
President CID, CAIS, P.E. (LA) [email protected]
Director of Sales & Marketing CID, CAIS, P.E. (LA) [email protected]
Directions on page 27 U.S. Hwy 167 & I-20, Exit 85