ip68 sealed fittings non-metallic systems

Technical Data Sheet08/11/2010 Page No.

IP68 Sealed FittingsNon-Metallic Systems

CMG House, Station Road, Coleshill, B46 1HT United Kingdom - Tel: +44(0)1675 468222 - Fax: +44(0)1675 464930 - e-mail: [email protected] - www.adaptaflex.com

1

Key Features

Straight Fittings

•Fixed (Metric PF and NPT)

•Swivel (Metric and NPT)

•Female (Metric NPT and UNEF)

45° Elbows




90° Elbows




Flanged Fittings

•Swivel (Straight, 45°and 90°)

Misc Fittings

•Straight Couplers

•Strain Relief Fittings

•Cable Gland

•Internal braid

•Manifold Boxes

IP6x - Totally Protected Against

dust (Dust-tight)

IPx8 – Protection Against Long Periods Of Immersion Under Pressure (4 Bar 30Mins)

IP Rating

Flame Retardant

Heat Stabilised

Nylon 6,6

TPV

Materials

Fitting Types

High UV Resistance

IP68 Sealed Fitting

IP69K Sealed Fitting

Single Piece Fitting

Integrated Seal System

Characteristics

ApprovalsRail – Rolling Stock And Line Side

General Construction

Boat Building and Marine

Applications

INFORMATION

Conduit Size Clearly Indicated

Integral Face Seal Washer

Can Not Be Lost Or Fitted IncorrectlyThread Data -

Thread Size ClearlyIndicated On Thread

Integral Elastomer Conduit Seal –

Guaranteed Fit, Can Not Be Lost Or Assembled Incorrectly

Proven Clip Design

Ensures Secure Fitments

High Visibility Elastomer –

3 Visible Confirmation Points

Moulded Face Seal Washer

And Seal For Swivel Fittings

Lead In To Bore IsInsulated Protecting Cables

Extensive Moulded Seal Guarantees Fit

KM35161




2

Class 12 mins at Specified Value PA Standard)IEC 61386-1Tensile Strength

Nylon Body

Elastomer Seal

Product

I4I RatingNF F16-101Flammability

F2F RatingNF F16-101Smoke/Toxicity

Class 5No Visible DamageIEC 61386-1Impact Strength (23°C)

Class 3No Visible DamageIEC 61386-1Impact Strength (-5°C)

Class 1No Visible DamageIEC 61386-1Impact Strength (-45°C)

ValueRequirementsMethod/StandardsTest Type

ValueRequirementsMethod/StandardsTest Type

I4I RatingNF F16-101Flammability

F2F RatingNF F16-101Smoke/Toxicity

Pass1kW Flame Self ExtinguishingIEC 61386-1-12Flammability

Pass750°C No IgnitionIEC 61386-1Glow Wire

ResultRequirementMethod/StandardTest Type

Flammability, Smoke and Toxicity (FST) Performance

-40°C to +105°CStatic Long Term

-50°C to +120°CStatic Short term

-45°C to + 120°C5000 Operations at MBR 2HrsIEC 61386-23Dynamic Applications

Thermal Properties

Class 22 mins at Specified Value PA Heavy)IEC 61386-1Tensile Strength

Mechanical Properties

50 (%)23 (0C)BS EN IEC 61386168 (Hours)

Relative HumidityTemperatureStandardDuration

Pre test Conditioning

PROPERTIESAll Values Based on Size 21 Fittings and PAFS Conduit, For Other Sizes and Conduit Systems Please Consult Adaptaflex




3

Not SuitableZinc ChlorideLubricating oil

White SpiritLactic Acid

WaterNot SuitableHydrogen Peroxide (87%)

Not SuitableVinyl AcetateNot SuitableHydrogen Peroxide (35%)

Vegetable OilNot SuitableHydrochloric Acid (36%)

TurpentineNot SuitableHydrochloric Acid (10%)

TrichloroethyleneFreon 32

1,1,1-TrichloroethaneNot SuitableEthyl Ethanoate

Transformer OilEthylene Glycol

Not SuitableTolueneNot SuitableEthylamine

Not SuitableSulphuric Acid (70%)Ether

Not SuitableSulphuric Acid (10%)Ethanol

Not SuitableSulphur Dioxide (Gas)Not SuitableDiethylamine

Sodium Hydroxide (60%)Diesel oil

Sodium Hydroxide (10%)Not SuitableCresol

Sodium ChlorideCopper Sulphate

SkydrolCitric Acid

Silver NitrateNot SuitableChloroform

Sea WaterNot SuitableChlorine water

Not SuitablePhenolCarbon tetrachloride

PetrolBenzene

Paraffin oilBenzaldehyde

Not SuitableOzone (Gas)Not SuitableAniline

Oxalic AcidAluminium Chloride

Not SuitableNitric Acid (70%)Acetone

Not SuitableNitric Acid (10%)Acetic Acid (10%)

MEKAstm No.3

Not SuitableMethyl BromideAstm No.2

MethanolAstm No.1

Chemical Properties

The information above is given as a guide only and is based on published technical data and experience. The chemical resistance of the above products is dependant on

factors such as chemical exposure, concentration of the chemical and temperature. The above chemicals are valid for a temperature of 23°C. Use of the above table is at

the users own discretion and risk. Those using it must satisfy themselves that their application presents no health and safety risks. The end user should assess compatibility with their application and contact Adaptaflex for further information.

Suitable Limited Suitability

CHEMICAL RESISTANCEBODY – NYLON (Black or Grey)

SEALS – TPV (Yellow or Blue)

ip68 sealed fittings non-metallic systems

Documents