ip user manual

8/3/2019 IP User Manual

1/35

User Manual

V1.6

IP Camera

Model:

In the use of this product, please carefully read this user manual, user manual,

please keep a proper record of

1


2/35

Description

Dear users, please use this product before reading this instruction manual carefully, in the

course if you read the technical details of some description is unclear or ambiguous, such as

printing causes the product you use to operate in accordance with the instructions after can not

solve the problem, please call our hotline to consult the company's technology solutions. Due to

product version upgrades or other reasons, the contents of this manual will be updated from time

to time without notice to you please understand the inconvenience.

Standard preparation and packing list

Please user after receipt of this product carefully check the following list of defects, if

requested in time with the company or dealer.

1. a network camera

2. DC12V / 2A power adapter a

3. a CD-ROM

4. a certificate

5. a warranty card

2


3/35

ContentsProduct Overview

Features

Technical parameters

Notes

Appearance and interface

5.1Presentation Description

5.2The main interface

Connection Method

Software landing

8.1Landing equipment

8.2Page description

8.3Note the main interface

System Settings

9.1Basic information

9.2User Management

9.3Serial port settings9.4Front-end recording

9.5Clock settings

9.6System Status

Audio Video

10.1Video Channel

10.2Video parameters

10.3Image settings

10.4Audio settings

Network Settings

11.1Ethernet

11.2Wifi

11.3PPPoE

11.4DDNS Settings

11.5Port the preparation of

3


4/35

Alarm settings

12.1Alarm input

12.2Motion Detection

12.3Video lost

12.4Linkage Set

12.5Alarm linkage

Local settings

Appendix Frequently Asked Questions

Cable connection and installation of alarm diagram

4


5/35

Product Overview

Welcome to the purchase of Network Camera product, the company's network of cameras

using the latest scientific research and the most advanced production technology, generous body

compact, easy to install, with full-featured, stable performance, image quality and features such

as adjustable bit-rate flexibility, safe products in the urban construction, intelligent building,

bank security, urban roads, airports, stations, places such as monitoring a wide range of

applications.

Features

1.the standard MPEG-4 video compression format

2. support D1, CIF, QCif three types of video formats

3. built-in Web Server, full support IE browser monitor, configuration and management,

operation simple, convenient

4. dynamic rate control to ensure the Internet's audio and video real-time transmission

5. in support of two-way voice intercom

6. support alarm input and output

7. support for Motion Detection

8. support the video block (or higher SONY480 required)

9. support for image capture

10. to support the adjustment of image parameters

Technical parameters

Item Parameters of thecontent

Video Access Cable Access

Video standard NTSC or PAL format support

Encoding MPEG4

5


6/35

Frame rate PAL :10 - 25 f/sec, NTSC :10 - 30 f/sec

Image Adjustment Brightness, contrast, chroma, saturation, image quality level adjustment

Video resolution PAL 720*576 pixel @ D1 352*288 pixel @ CIFNTSC720*480 pixel @ D1 352*240 pixel @ CIF

Stream type Video stream (dual stream: D1 + CIF), audio stream

Motion Detection Regional and sensitivity can be setBit-rate videocompression

128Kbit/s4Mbit/s

Delay screen Less than 200 millisecond (LAN)

Audio Intercom voiceinput

1 Road, MIC interface, linear input

Audio Output 1 Road, RCA interface, linear output

Network Network Interface RJ-45 10/100M

Network type Ethernet, 802.11b / g network, WAN (router / modem reprovision)

Network protocol RTSP/RTP/DHCP/MUDP/NTP/SMTP/UPNP

Alarm PPPoE PPPoETrigger conditions Video Motion Detection / Video Loss Action

Motion Detection Sensitivity 1100Linkage alarmVideo lost Sensitivity 1100Linkage alarmAlarm input 1 way switch input

Alarm output 2-way switch output

Work temperature 35 + 65 Humidity 90%RH

Voltage DC12V /2A

Power 10.5W

Notes

1. the product during transport, please do not drop, vibration and other severe damage to the

product;

2. the network camera installation environment: environmental drying ventilation, do not install

in a damp environment, so as not to shorten the service life;

3. set the machine fixed in a safe place to avoid falling damage;

4. not to wire and cable easily be placed in the local people to touch in order to avoid poor

contact caused by signal transmission lines destabilizing effects of video quality;

5. clean the machine when you power. Do not allow cleaning chemicals and aerosols can only be

used to clean dry cloth.

6. Do not be any foreign body or fluid material to infiltrate into the internal machinery to avoid

damage to the machine.

6


7/35

7. when an internal failure of the machine, the user not to repair, should be our technical staff or

by our authorized repair maintenance personnel, if the user to repair all the consequences and

the loss of personal commitment by the user, and the Company has nothing to do.

Appearance and interface

5.1Presentation Description

Product Name: Gun-type Network Camera

Product Model:

Product appearance

Figure 5-1 positive map

5.2 Interface

The products are mainly in the back-end interface, as shown below and note the location of

interface

7


8/35

Figure 5-3 Rear Panel Figure

power DC12V/2A

Audio Output RCA interface, linear output

Audio input RCA interface, linear input

RS485/ALARM RS485 PTZ control and alarm input and output interfaces

USB USB interface to provide front-end video memory

Initial System reset button

Network Interface 10/100M adaptive Ethernet Interface

Auto Iris Standard auto iris lens socket 4Pin

Connection Method

7.1Direct Connect Mode

Directly to the camera and computer network with network cable connected to a

8


9/35

standard Ethernet cable and monitor the video server to connect to the host.

7.2Network connection mode

Figure 7-1 Schematic diagram of network connections

As shown, the video server to connect to the INTERNET network switches, in the center of the

host monitor IE browser to visit

Sign software

8.1Landing equipment

First of all, the computer IP address and the equipment is set to the same network segment

IP address. If the device IP address is 192.168.1.217, gateway 192.168.1.1. IP address of the

computer is more variable: 192.168.1.XX. Gateway 192.168.1.1

Open the IE browser, enter in the address bar of your video server's default IP address, or

the domain name in the opening function of the visit through the domain name, enter the domain

names, landing shows the dialog box, as shown.

9


10/35

User equipment, such as the address of uncertainty, you can run electronic equipment video

server software search, NVS-related operations the client can see the user manual.

Figure 8-1 Landing Interface

The initial state of the default address: 192.168.1.217.

User name: admin

Password: admin

Note: any user using the default user name and password after landing with the operation of

all operating authority, it is recommended the first time users to change my

password after a successful landing, in order to ensure system security.

first-time users need to install OCX controls, click on the image above:

To download and install. Otherwise, enter the following, will be

connected to see the video.

8.2Page description

After landing, access to equipment for IE first, as follows:

10


11/35

Figure 8-2 page

8.3Note the main interface

8.3.1Toolbar Help

Figure 8-3 Toolbar

Disconnect / connect devices

Drawings, pictures in the form of photos stored in the local PC

11


12/35

By the current video image to play sound stored in the PC

Video file playback.

User and control real-time voice intercom.

Sound on / off

Out of the current page.

8.3.2Video formats

Figure 8-4 Video format

Users can choose different needs of different video format.

8.3.3PTZ control

Figure 8-5 PTZ control

PTZ to normal control, we must first set up the parameters Yuntai detail settings please

refer to serial port settings.

12


13/35

Upon completion of parameter setting, you can control the PTZ. Including aperture +

(aperture -), Focus + (Focus -), Zoom + (zoom -) as well as up and down for about such

operations, the user can also drag the slide to adjust the standard rotational speed PTZ.

8.3.4Preset digital settingsUser by setting the preset, and can be easily scheduled to make the location of PTZ.

Click on the "pre-position" as shown below.

Figure 8-6 Setting preset position

Add a preset position, the user input and presets preset heading site, click on "Add"

prompted "to add the success of pre-digital."

Delete preset position, the user choose to delete the preset position, click on "delete" prompted

"Delete success of pre-digital."

Call the preset position, it is necessary to call a preset position, first of all choose to call

home, and click on the "call"

PTZ preset automatically to call at a location which, at the same time prompted to "pre-digital

call success."

8.3.5

Set guard bit

Figure 8-7 guard-bit set

13


14/35

First of all, select "Enable guard-bit function", select the guard bit and idle time settings, click on

"settings" option.

System Settings

9.1Basic information

Basic information indicating that the current system information, users can restart the

implementation of the software to restore the factory default values and restart the operation of

equipment. As shown below.

Figure 9-1 Basic Information

System Information: Displays the current device name, device ID, core version, service version,

web version and the plug-in version.

Automatic restart: Users can set the device to restart every time, methods of operation, first

check the "Enable" then set the interval to restart, you can save.

Upgrade: the user can upgrade the software and maintain the software for the latest version.

First of all choose the path where the upgrade file, click on the "upgrade."

Note: In the process of upgrading, please do not power down and carry out any operation of the

software in order to avoid escalation of system failure or damage.

14


15/35


16/35

9.3Serial port settings

User by setting the serial port parameters, you can control serial devices by then.

Figure 9-3 Serial Port Settings

Serial port access by users to choose the type of device supported by device baud rate, data

bits, stop bits, parity bit, an agreement the name and address of the ball machine. Can be set

up after the completion of preservation.

9.4. front-end recording

9.4.1. time deployment

Users can set the front-end deployment time automatic video recordingtime.

16


17/35

Figure 9-4 Recording Front End

9.4.2. video management

Users can set the reserved disk space, insufficient disk space when the video strategy,

stop the video, or delete the oldest video file.

Set the maximum file length, set the front of the video files the maximum length (1-60

minutes) and documentation strategy, and switch to stop the video file.

Set alarm video length, set up automatically when the alarm occurred in the video a long

time.

9.4.3. disk status

Front-end storage devices access basic information on the disk status is displayed, the

above set of parameters after the completion of

Click the "Start Video" video status shown as "Manual Video" To stop the video, click "Stop

Video"

In the course of the video, you can choose "automatic refresh" the system will select the

refresh time in accordance with the following disk status information

automatically refreshes.

17


18/35

9.5. the clock setting

The user can choose the date and time zone.

Figure 9-5 set-up time

Time zone settings: Select the local time zone, select it click "Save."

Date set: Date set to choose machines with PC synchronization, set up after the click Save to

Network clock settings: check the "automatically synchronize with the INTERNET clock

server", select the server name after the save, the system automatically with the

selected clock server to keep pace INTERNET.

9. 6. the system state

System Status displays the current status of video and audio.

Figure 9-6 System Status

Choose to refresh every time, or check the automatic brush, the system can automatically refresh

the status of audio and video

18


19/35

Audio Video

10.1Video Channel

Choice of audio and video into the video channel page. As shown below.

Figure 10-1 Video Channel

Different network types, the user can choose a different video channel. If the user is

connected through the LAN network camera, the user can choose "applicable to the LAN."

First, open the D1 switch, and then choose the quality of the network frame rate preset

stream. Set rate control type, encoding and video formats, such as model parameters.

Upon completion of parameter settings can be saved.

19


20/35

10.2Video parameters

Set shows the subtitles in the video content, including: name, time, bit-rate settings

Figure 10-2 video parameters

Users choose to display subtitles, you can set up after the completion of preservation.

10.3Image settings

Users can adjust the video brightness, contrast, color saturation and to enable the display of

images to achieve the best results. To restore the default parameters, click on the "default value"

good parameter settings can be saved.

20


21/35

Figure 10-3 Image settings

10.4Audio settings

Users can adjust according to the actual audio input and audio output volume size. As shown

below.

21


22/35

Figure 10-4 audio settings

Settings are finished, click the "Save" button, to restore the ex-factory value, select the

"default value."

Network Settings11.1Ethernet

Through the Ethernet settings, the user can carry out the relevant parameters for the

Ethernet settings. As shown.

Figure 11-1 Ethernet

22


23/35

Users can set up the network according to the actual situation parameters can be set

up after the completion of preservation.

DHCPC settings: You can turn this option, automatically access the network from

the local network parameters, the content needs to support DHCP Server, please contact

the network administrator to confirm.

11.2Wifi

wireless network adapter settings: the need for local networks to support wireless network

The following chart, open the "wireless network switch", the configuration parameters of

the local wireless network.

Figure 11-2 Wifi

Note:

set up a wireless network adapter, the Ethernet card to change the IP address, Ethernet

address after Kai will automatically become the same with the wireless card.

If the Ethernet card and wireless card at the same time, equipment, wireless card preferred

23


24/35

11.3 PPPoE

Need to set up automatic PPPoE dial-up, the first switch should open, select the card type,

network operators fill the account number and password, click Save to

Figure 11-3 PPPoE

11.4 DDNS settings

Need to set up dynamic DNS, the first switch should be open.

Select DDNS service providers, 3322. ORG, enter the DDNS username and password, DDNS

address parameters can be saved. As shown.

Figure 11-4 DDNS settings

24


25/35

11.5 port preparation

Select Network Settings, enter the web portal page, as shown below.

Figure 11-5 Port the preparation

WEB Port: equipment for the landing page of the IE port.

FTP port: FTP uploading and downloading for the port.

RTSP port: port real-time streaming for video streaming.

Intercom port: the port used to talk.

Upgrade port: the port used for the upgrade process.

UPNP switch: Plug and Play switch.

25


26/35

Alarm settings

12.1Alarm input

Select "Alarm Settings" to enter the "alarm type" page, as shown.

Figure 12-1 Alarm input

First of all, users choose to enter the police, set up the deployment time, the parameters can be

saved.

26


27/35

12.2Motion Detection

Select "Alarm settings" and enter "mobile detection" page. As shown.

Figure 12-2 Motion Detection

To detect movement, we must first start the "mobile detection" feature. And then set up

mobile detection sensitivity (1-100, the value of the larger, higher sensitivity)

Mobile detection time. Upon completion of the preservation can be.

27


28/35

12.3Video lost

Select "Alarm settings" and enter "video loss" page. As shown.

Figure 12-3 loss video

First of all, check "Enable video loss alarm," the loss of sensitivity of the video settings (1-100,

the value of the larger, higher sensitivity)

Set video loss time. Upon completion of the preservation can be.

28


29/35

12.4Linkage Set

Select "Alarm settings" and enter "linkage settings" page. As shown.

Figure 12-4 linkage set

12.4.1 Parameter Alarm Center

First of all alarm users to set up the Center address, port and alarm centers. Can be set up after

the completion of preservation.

12.4.2, the message parameters

First of all, set up mail server user name, e-mail type, enter the user name and password. Can

be set up after the completion of preservation.

12.4.3, alarm output parameters

First of all, users choose a state of alarm output and alarm output level, set the alarm level to

maintain the time. Can be set up after the completion of preservation.

12.4.4, FTP client parameters

Users first enter FTP server name, user name and password, FTP path and select FTP upload

(download) the type, can be set up after the completion of preservation.

29


30/35

12.5Alarm linkage

Select "Alarm settings" and enter "alarm linkage" page. As shown.

Figure 12-5 linkage alarm

12.5.1, alarm input linkage

First of all alarm users to select input channel, set the alarm time and alarm linkage every

option, including the police call center, mail, alarm output 0, alarm output 1, the front-end video,

FTP upload and play a sound.

12.5.2, the mobile to detect linkage

First of all mobile users to detect the alarm every time.

Then select the Linkage option, including the police call center, mail, alarm output 0, alarm

output 1, the front-end video, FTP upload and play a sound.

11.5.3, video missing linkage

First of all user settings every time the video loss alarm.

Then select the Linkage option, including the police call center, mail, alarm output 0, alarm

output 1, to play a sound.

30


31/35

Local settings

Select "Local Settings", enter the local settings page.

Figure 13-1 local settings

Video memory settings: first set the maximum length of video file, and then select the video file

storage directory.

Alarm linkage video: First check the "alarm linkage Video", and then set the alarm the length of

the video file.

Finish to save your settings.

31


32/35

Frequently Asked Questions

1. can not access the network through the browser, camera

Possible reasons: network problems

Solution: 1) to confirm the network trouble-free

2) to confirm that the IP network camera's IP address and the computer to Sites in the

same network segment, and the IP network without conflict.

2. no image display connected

Possible reasons for this: Active control is not installed

Solution: in the land interface to download and install the Active Control

3. external PTZ control

Possible reasons: to connect the signal line is incorrect or bad.

Solution: re-connect to ensure that the wiring connection is correct and good contacts.

Possible causes: Yuntai agreement, baud rate and address settings are not correct

Solution: in order to enter the System Settings / Serial Port settings, setting the correct Yuntai

agreement, baud rate, address and other parameters.

4. play video files with sound without images

Possible reasons: There is no universal DIVX decoder installed

Solution: download and install General DIVX decoder.

5. forget the device IP address

Solution: 1) search software search equipment IP Address

2) Press the INITIAL key system parameters will be restored to factory default values

32


33/35

Appendix: Cable connection and installation of alarm diagram

Bolt with the way the network input, output cable all the way the police function, the

installation of alarm control line connection in accordance with the following diagram. When

the alarm probe to identify that the alarm signal, you can start the corresponding wired alarmfunction and alarm output to trigger an alarm signal cooked:

Note:

1. Alarm switch input must be a type of input signal, any other type of input signal (eg,

voltage signal, etc.) may damage the product.

2. If wired alarm function activated, alarm input probe 2.2K resistor must be received,

otherwise the system would be considered to be alarm signal input and alarm functions will be

action.

6.1 serial alarm input (normally closed switch-type) connection diagram

33


34/35

6.2 Parallel alarm input (normally open switch type) connection diagram

34


35/35

6.3 Alarm output connection diagram

ip user manual

Documents