ip-lubricants-oils-greases
DESCRIPTION
Lubricants, Oils & GreasesTRANSCRIPT
Lubricants, Oils & Greases
EDM Fluid
Hales Diatomite Absorbent Clay
HALESEDM5-20 & HALESEDM5-205
Description Low viscosity dielectric fluid for EDM application. Also suitable for light grinding and honing of ferrous and non-ferrous metals.
HALESABSORBCLAY
Description 30LT BAGS a light weight material used to contain and absorb industrial, oil,water, chemical waste.
Part Number Description
HALESEDM5-20
HALESEDM5-205
20 Litres
205 Litres
Part Number Description
PROLON-2.5KG
PROLON-250G
PROLON-500G
PROLON-SPRAY
Prolon 2.5kg Tub
Prolon 250gm Tube
Prolon 500gm Tub
Prolon Spray Can 400g
Pro-Lon Grease
www.hales.com.au
Lub
rica
nts
-O
ilsa
nd
Gre
ase
s
44
EDM 5 - A light viscosity dielectric fluid for EDMapplications. Clear in colour.
The ultimate P.T.F.E. paste for the assembly ofinjection mould tools, engine head assembly andmany other uses.
CRC
Part Number Size Description
CRC-5.5620LT 20 Litre
CRC-5.564LT 4 Litre
CRC-5.56CAN 400g Aerosol Can
Penetrates and Lubricates, loosens rusted parts, prevents corrosion and displaces moisture. Extremely versatileContains no siliconTotal maintenance for automotive, industrial and general purposeSuperior penetrating power that breaks through rust and corrosionwhile it cleans away scale and dirt, eliminates the need for manydisassembly operations. Lubricates for a smooth action.
Also available in 175gm 500ml, 1 litre, 200 litre
5.56
Part Number Size Description
CRC-TREF2LT 2 Litre
CRC-TREF500ML 500ml
Active green cutting compound contains a colloid. It melts slowlyas friction heat is generated. It maintains efficient lubricationthroughout various operations such as pipe screwing, hacksawing, tapping reaming etc. it is suitable for all uses of handtools, and prolongs the life of the tool. It will not corrode steel oraffect aluminum, also suitable for stainless steel, will dull copperand brass.
Trefolex Cutting Compound
www.hales.com.au
Lub
rican
ts-
Oils
an
dG
rea
ses
45
The professionals choice.CRC 5.56 multipurpose
product has superiorpenetrating power, thatbreaks through rust &
corrosion while it cleansaway scale & dirt.
CRC
Part Number Size Description
CRC-TREF HD500 500ml HD cutting fluid is an extreme duty, thick fluid that sticks to thecutting tool through out the operation. Suitable for a wide varietyof materials.
Trefolex HD
Part Number Size Description
CRC-TREF AL500 500ml AL cutting fluid is a solvent based cutting fluid designed toprovide superior lubricity and cooling in cutting aluminium and itsalloys. Evaporates quickly and leaves little residue and providesexcellent finishes.
Trefolex AL
Part Number Size Description
CRC-TREF CDT CAN 300g Aerosol Can CDT cutting fluid is ideal for critical machining of non-ferrousmetals for all operations (see material groups)
Trefolex CDT
Part Number Size Description
CR tcatnocdooflatnedicnirofderetsigeR1HFSNg053NOCILISDOOF-CMultipurpose silicon spray for food processing and handlingapplicationHarmless to most rubbers and plasticsWide effective temp range (-40C to 204C)Excellent release agent and lubricant for all surfaces
Silicone Food Grade
Part Number Size Description
CRC-LONGLIFE CAN 300g Aerosol Can Long term protection to all metals subjected to rust and saltcorrosionAlso lubricates for extending life of metal to metal sliding surfacesProtects cutting tools and equipment
Long Life
www.hales.com.au
Lub
rica
nts
-O
ilsa
nd
Gre
ase
s
46
CRC
Part Number Size Description
CRC-MACHINEOIL 350g Aerosol Can NSFH1 Registered for incidental food contact, effective general-purpose lubricant for use on food processing equipment ,Penetrates and loosens rust, scale, dirt and corrosion free partsand fasteners, contains no silicon, virtually odourless andcolourless, will not harm metal, wood, plastic or painted surfaces
Food Grade Machine Oil
Part Number Size Description
CRC-PENETR8 400g Aerosol Can High speed penetrant that helps dissolve rust and corrosion andraplidly frees corroded parts. Clear formula that contains nodyes and leaves no mess
Also available in 500mm trigger
Penetr8
Part Number Size Description
CRC-POWERLUB 350g Aerosol Can A Unique lubricant, that contains Teflon to provide protectionagainst friction and wear, while displacing moisture and providesa long lasting protective film.
Power Lube with Teflon
Part Number Size Description
CRC-SOFTSEAL 300g Aerosol Can Provides a waxy film that is resistant to humidity and salt spray ,will not become brittle and will not craze. It seals out moisture andcorrosive contaminants by forming a dry transparent, amber film.Used to protect equipment in transit, and storage
Soft Seal
www.hales.com.au
Lub
rican
ts-
Oils
an
dG
rea
ses
47
Mould Release SpraysHales have a wide variety of aerosol mould release agents
Part Number Description
DIE CLEANER A heavy duty formulation designed to clean injection mould, tools and dies after productionruns and prior to commencement of new jobs.
Tool & Die Cleaner
Part Number Description
DIE PROTECTOR A heavy duty formulation designed to protect tools, injection moulds and dies from oxidizationand rusting during storage in between production runs. Pentrates tools and mould removesmoisture from cavities and mould. Leaves a protective film of lubrication oils and a rustpreventative coating.
Tool & Die Protector
Part Number Description
SILICONE MOULD A proven release agent to prevent sticking in mould cavities for the following materials:-• ABS Resins• Nylon
• PP – (Polypropylene)• PE – (Polyethylene)
• PP – (Polypropylene)• PE – (Polyethylene)
• Polyesters• Melamines• Rubber• Acrylics• Polystyrene• Celluloses
Silicon Mould Release
Part Number Description
PAINTABLE MOULD A premium quality release agent which enables plastic parts to be printed, painted hotstamped, vacuum plated and metalised, suitable for the following materials:-• ABS Resins• Nylon• Polyesters• Melamines• Rubber• Acrylics• Polystyrene• Celluloses
Paintable Mould Release
www.hales.com.au
Lub
rica
nts
-O
ilsa
nd
Gre
ase
s
48