ion exchange chromatography
TRANSCRIPT
IonExchangeChromatography In Pharmaceutical
sciences
Applications of
Siva Chaitanya
CONTENTS1. Brief history and introduction2. Definition3. Principle 4. Column Chemistry5. Types of Ion exchange chromatography6. General steps in IEC7. Applications
Separating proteins8. Other applications9. References
Brief history and introduction Old technique, separates by charge -in Aristotle time , brakish water can be desalinated with sand
-The first report (1850) of research is by english agriculture chemist , H.S. Thompson. He found that on passage of a solution of ammonium sulfate through soil ,some or all the ammonium was repalced by calcium ion. He called this ion exchange
-An important advance was made in 1935 when Adams and Holmes published the first paper on the synthesis of ion exchange resins.
-AG resin introduced by BioRad in 1957, originally intended for purification of TMV
4
Definition Ion-exchange
chromatography (or ion chromatography) is a process that separates ions and polar molecules based on their affinity to the ion exchanger.
5
Principle Ion exchange chromatography
retains analyte molecules based on ionic interactions.
The stationary phase surface displays ionic functional groups (R-X) that interact with analyte ions of opposite charge.
Beaded or Monolithic Hydrophilic Physically strong Cellulose Agarose
Polystyrene Polymethacrylate Polyacrylamide
Stationary phase material
Column Chemistry
7
Ion exchangers – Functional groups
Anion exchanger Quaternary aminoethyl (QAE-) Diethylaminopropyl (DEPE-) Diethylaminoethyl (DEAE-)
Cation exchanger Methylsulfonate(S-) Sulphopropyl (SP-) Carboxymethyl (CM-)
8
Cation exchange chromatography Cation exchange chromatography retains
positively charged cations because the stationary phase displays a negatively charged functional group
R-X C +M B R-X M + B + C- + + - _ + +-
1. Cation exchange chromatography 2. Anion exchange chromatography.
Types of Ion exchange chromatography
Anion exchange chromatography Anion exchange chromatography retains
anions using positively charged functional group:
R-X A +M B R-X B + M + A+ - + - + - + -
9
General steps in IEC
1 •A sample is introduced either manually or with an autosampler into a sample loop of known volume.
2 •The mobile phase (buffered aqueous solution) carries the sample from the loop onto a column that contains some form of stationary phase material.
3 •Stationary phase material is a resin or gel matrix consisting of agarose or cellulose beads with covalently bonded charged functional groups.
4 •The target analytes (anions or cations) are retained on the stationary phase and can be eluted by increasing the concentration of a similarly charged species that will displace the analyte ions from the stationary phase.
5 •The analytes of interest must then be detected by some means, typically by conductivity or UV/Visible light absorbance.
6 •A chromatography data system (CDS) is usually needed to control an IC. For example EMPOWER for waters
APPLICATIONSIt can be used for almost any kind of
charged molecule including large proteins, small nucleotides, nucleic acids and amino acids.
It is often used in protein purification, water analysis.
Separation conditions are within physiological range of salt and pH and in the most cases a native protein can be obtained.12
Separating proteins
Proteins have numerous functional groups that can have both positive and negative charges.
Ion exchange chromatography separates proteins according to their net charge, which is dependent on the composition of the mobile phase.
By adjusting the pH or the ionic concentration of the mobile phase, various protein molecules can be separated. 13
Electrostatic Potential Map of the Surface of a Protein
Mechanism of protein separation pH based separation: Salt based separation:
16
Proteins are charged molecules. At specific pH, it can exist in anionic (-), cationic (+) or zwitterion (no net charge) stage.
[H+][OH-] [H+]
Protein becomes increasingly -ve
Protein becomes increasingly +ve
[OH-]pH ~3
At pH 3 the protein will be +ve pH ~7
At pH 7 the protein will be -ve
anionic
cationic
pH =pI
17
The pH of buffers should be one unit below pI for cation exchangers and one unit above pI anion exchangers
Stability of proteins stable below pI value, use cation-exchanger stable above pI value, use anion-exchanger
Molecular size of proteins <10,000 mw, use matrix of small pore size 10,000-100,000 mw, use Sepharose equivalent
grade
Factors to be considered during protein separation:
EDTA – For Chelation
Chaotropic Salts – Eg: Urea for stabilization
PEG – For Enhanced Selectivity
DTT – To Prevent Oxidation
Use Cationic Buffers in Anion Exchanger : Eg: Alkyl Amines, Tris, Amino Ethyl Alcohol
Use Anionic Buffers in Cation Exchanger: Eg: Phosphate, Acetate, Citrate, Barbiturate
Buffers Used in Ion Exchange Chromatography
Mobile Phase Modifiers
Factors affecting Ion Exchange Chromatography
pH of mobile phase Operating pH of Ion Exchange Chromatography (IEX) is mostly 2-9.
Ionic StrengthMobile Phase ModifiersTemperature
20
AbstractA great number of naturally occurring mononucleotides can be separated and identified by poly(ethyleneimine)-cellulose thin-layer chromatography. RF data for 33 compounds are given, and the factors are discussed which influence the mobility under different elution conditions. The method is compared with other present techniques for separating nucleotides.
Separation of Amino Acids:
The free amino acids in human CSF from eighteen subjects have been determined.Amino acids always found in readily detectable amounts were: taurine, threonine, serine, glutamine, glutamic acid, citrulline, glycine, alanine, α-NH2-n- butyric acid, valine, methionine, isoleucine, leucine, tyrosine, phenylalanine, ethanolamine, ornithine, lysine, histidine and arginine.
AbstractHigh-speed liquid chromatography with superficially porous ion-exchange column packings has been used to separate and quantitatively analyze the water soluble vitamins nicotinic acid, thiamine, riboflavin, ascorbic acid, folic acid, pyridoxine, pyridoxal and pyridoxamine. Chromatograms and chromatographic conditions for these as well as the phosphoric acid esters of riboflavin and pyridoxamine are shown. The reproducibility of retention time and peak area has been demonstrated to be better than 1.5% while the lower limits of sensitivity for the test vitamin compounds were better than 50 nanograms. Advantages of the technique include fast analysis times and minimum of sample clean up. Applications of the methods to vitamin analysis of food and pharmaceutical products are discussed.
Analysis of Water-Soluble Vitamins by High-Speed Ion-Exchange Chromatography
R
R.C. WilliamsD.R.BakerJ.A.Schmit
0ther applicationsIon exchange chromatography is used to convert one salt to other. Eg; we can prepare tetra propyl ammonium hydroxide from a tetra propyl salt of some other anion.
It is useful for pre concentration of trace components of a solution to obtain enough for analysis
Ion exchange is used to prepare de-ionized water
Water polishing equipment used in many laboratories uses several ion exchange cartridges.
For the measurement of drugs and their metabolites in serum and urine, for residue analysis in food raw materials.
For the measurement of additives such as vitamins and preservatives in foods and beverages.
Separation of similar ionsA mixture of sodium, hydrogen and potassium can be separated using cation exchanger resin.A mixture of Chloride, bromide, and iodide can be separated using basic anion exchange resin.
References Ion Exchange in Analytical Chemistry: International
Series of Monographs in in analytical chemistry volume 38 By William Rieman, Harold F. Walton.
Himmelhoch, SR (1971) Chromatography of proteins on ion-exchange adsorbents Meth. Enzymol 22:273-286.
Scopes, RK (1982) Ion exchangers-principles, properties and uses. In “Protein Purification: Principles and Practice” , pp75-101. Springer-Verlag, New York.
Practical HPLC method development,2nd Edition, Lloyd r. snyder,pno.341-346
Principles of instrumental analysis , skoog , latest edition, pno. 641-647