introduction to film and media studies: film editing basics

49
INTRODUCTION TO FILM AND MEDIA STUDIES: EDITING

Upload: shanovitz

Post on 25-Jun-2015

1.720 views

Category:

Education


7 download

TRANSCRIPT

  • 1. INTRODUCTION TO FILM AND MEDIA STUDIES:EDITING

2. WHAT IS FILM EDITING?FILM EDITING is part of the creative post-productionprocess of filmmaking. The FILM EDITOR works with the rawfootage, selecting shots and combing them into sequences to createa finished motion picture. An EDITOR must work to create effectiveFILM TRANSITIONS, which are techniques used to move from oneshot to the next to convey a tone or mood, suggest the passage oftime, or separate parts of the story.FILM EDITING is often referred to as the invisible art because if anEDITOR is particularly talented, the viewer can become so engagedthat he or she is not even aware of the editors work. The FILMEDITOR must know how to tell a story. EDITORS select sounds andimages from all the film that has been shot and arrange them tocreate the final version of the film. They also plan how one shot willbe transitioned to the next. He or she works creatively with the layersof images, dialogue, music, pacing, and actors performances toreimagine and even rewrite the film to craft a cohesive whole. 3. EDITORS CUTThere are several editing stages and the EDITORS CUTis the first. An EDITORS CUT (sometimes called the ROUGHCUT or ASSEMBLY CUT) is normally the first pass of what thefinal film will be when it reaches theaters. Prior to cutting, theEDITOR and DIRECTOR will have seen and discussed DAILIES(raw footage that is shot each day) as the film shootingprogresses. Screening DAILIES with the DIRECTOR gives theEDITOR an idea of the DIRECTORS intentions. The EDITORSCUT is typically longer than the final version of the film. TheEDITOR works with the DIRECTOR to refine the cut as shootingcontinues, and often the editing process can go on for months to ayear beyond the shooting of the film. 4. DIRECTORS CUTWhen shooting is finished, the DIRECTOR can then turnhis or her full attention to the collaborative process and work withthe EDITOR to refine the cut of the film. This is the time that is setaside for the EDITOR and DIRECTOR to mold the EDITORSCUT to fit the DIRECTORs vision. DIRECTORS receive aminimum of ten weeks after the completion of shooting to preparetheir first cut. During this process, scenes and shots are re-ordered,removed, shortened and otherwise altered. If theDIRECTOR and EDITOR discover problems (like plot holes,missing shots, or acting concerns), there is then time to re-shootnecessary scenes. 5. FINAL CUTAfter the DIRECTOR has had his or her chance tooversee a cut, the subsequent cuts are supervised by one ormore PRODUCERS who represent the production company and /or MOVIE STUDIO. After that collaboration is complete, theEDITOR returns to the studio to create the FINAL CUT, which isultimately what is released in theaters.There are sometimes conflicts between the DIRECTORand the PRODUCER / STUDIO (when the DIRECTORS VISIONwould be compromised by the STUDIOS goals). In fact, in some(rare) cases, this conflict cannot be resolved and the use of theALAN SMITHEE credit comes to play. This director creditsignifies when the DIRECTOR no longer wants to be associatedwith the final release. 6. FILM EDITING TERMINOLOGY:THE CUTA CUT is the most basic and common type of FILM TRANSITION is the CUT. A cut happens when one shotinstantly replaces another. It is an abrupt visual transition created in editing. Cuts are so widely used thatfeature movies normally count thousands of them.Cuts are essential for the effects of juxtaposition for viewers to establish meaning. Although most CUTSexist simply for a technical need, the abrupt replacement of one shot by the other demands a certaininterpretation from the viewer. 7. FILM CUTTING:EXPLAINED BYALFRED HITCHCOCK 8. EFFECTIVE EDITINGA good edit should1. elicit / convey appropriate emotion to add to thestorytelling.2. maintain continuity in terms of storytelling3. use eye trace (where the viewers eye goes) appropriatelyto ensure the viewer is not confused, strained, ordisoriented.4. maintain 2-dimensional plane of screen and 3dimensional space of action. 9. CONTINUITY EDITINGCONTINUITY EDITING is editing that creates action that flows smoothly across shots andscenes without jarring visual inconsistencies. This type of editing establishes a sense of storyfor the viewer. 10. 180 DEGREE RULEThe 180 DEGREE RULE is a basic guideline regarding the on-screenspatial relationship between a character and anothercharacter or object within a scene. An imaginary line called theAXIS connects the characters, and by keeping the camera on oneside of this AXIS for every shot in the scene, the first character isalways FRAME RIGHT of the second character, who is thenalways FRAME LEFT of the first. The camera passing over theAXIS is called JUMPING THE LINE or CROSSING THE LINE.With the 180 DEGREE RULE, the viewer rarely experiences anysense of spatial disorientation. CONTINUITY EDITING ensuresthe viewer never feels confused. 11. 180 DEGREE RULE 12. CROSSING THE AXISThe most common exception for violating the 180 DEGREE RULE, a techniqueknow as CROSSING THE AXIS, is for EFFECT. For example, in a chasescene, the 180 DEGREE RULE is violated to leave the audience puzzled. 13. CUTAWAYA CUTAWAY SHOT (sometimes called an INSERT SHOT) is when the EDITOR cuts awayfrom the primary subject to something the filmmaker has decided is equally or more relevant atthat time. The EDITOR uses this shot to add interest, pick up pacing, establish context, anddevelop meaning. 14. CUTAWAY:REACTION SHOTNOTE: The specific CUTAWAY SHOT that showcases a charactersreaction to something is termed a REACTION SHOT. 15. EYE-LINE MATCHTECHNIQUEEYE-LINE MATCH is a FILM EDITING TECHNIQUE associated with the CONTINUITYEDITING system. It is based on the premise that the audience will want to see what thecharacter on-screen is seeing. The eye-line match begins with a character looking atsomething off-screen, followed by a cut to the object or person at which he is looking. This shotis also called a LOOK-OFF SHOT. 16. EYE-LINE MATCHTECHNIQUE 17. SHOT REVERSE SHOT 18. SHOT REVERSE SHOTA SHOT REVERSE SHOT is a continuity editing technique used in conversations or simplycharacters looking at each other or at objects. It is a shot showing what the character issupposedly looking at (either a point of view or over the shoulder shot), which is followed by areverse angle shot of the character themselves looking at it, or of the other character lookingback at them. 19. CROSS-CUTTINGCROSS-CUTTING shots are those in which the EDITOR cuts back andforth between two or more events or actions that are taking place at thesame time, but in different places. CROSS-CUTTING is used to buildsuspense or to show how different pieces of the action are related.Another term for CROSS-CUTTING is PARALLEL EDITING. Again, thistype of editing is a technique of continuously alternating between two ormore scenes that are happening simultaneously, but in different locations.CROSS-CUTTING is a cornerstone of editing that works to mask abruptchanges in temporal (time) and spatial continuity, and enhance narrative. 20. CROSS-CUTTING(PARALLEL EDITING) 21. CROSS-CUTTING(PARALLEL EDITING) 22. MATCH ON ACTION ORMATCHED ACTION CUTA MATCH ON ACTION CUT is an editing technique for continuity editing in whichone shot cuts to another shot portraying the same action as the subject in the firstshot.This technique creates an impression of a sense of continuity the action carryingthrough creates a visual bridge. 23. MATCH CUT 24. DIALOGUE REFERENTA DIALOGUE REFERENT CUT is a cut from a character to whathe or she is referencing in his/her dialogue. 25. THOUGHT REFERENTA THOUGHT REFERENT CUT is a cut showing what acharacter is thinking. 26. DISCONTINUITYEDITINGDISCONTINUITY EDITING is a unique editing style in filmthat is antithetical to that of normal cinema, or CONTINUITYEDITING. In a discontinuous sequence, the filmmaker willdeliberately use an arrangement of shots that seem out of placeor confusing relative to a traditional narrative.Russian director Kuleshov was a famous innovator in theDISCONTINUITY EDITING technique. He discovered thecinemas ability to link entirely unrelated material into coherentsequences. The meaning the audience derived from it wascompletely invented. He termed the technique creativegeography. 27. THE KULESHOVEXPERIMENTRussian director Lev Kuleshov edited together a short film inwhich a shot of the expression of a man was alternated withvarious other shots (a plate of soup, a girl, a coffin, a woman on adivan). The film was shown to an audience who believed themans expression was different each time he appeared,depending on what object he was looking at; however, the footageof the man was actually exactly the same each time. Kuleshovused the experiment to illustrate the usefulness of film editing.The implication is that viewers bring their own emotional reactionsto sequences of images. Director Alfred Hitchcock explained thisediting technique and the KULESHOV EFFECT in the interviewshown earlier. He terms this technique PURE CINEMA. 28. THE KULESHOVEXPERIMENTThe audience believed the man first looked sad, then looked hungry (after the image of thesoup), then mournful (after the image of the baby in a coffin), and then lustful (after the imageof the woman)> 29. MONTAGE EDITINGMONTAGE is a technique in film editing in which a series ofshort shots are edited into a sequence to condense space, time, andinformation.Famous Russian directorEisenstein, a director known highlyinfluenced by Kuleshov and known for establishing the Soviet MontageTheory, stated that montage is an idea that arises from the collision ofindependent shots wherein each sequential element is perceived not nextto the other, but on top of the other. It is his belief that the quickjuxtaposition of certain shots helps to elicit certain emotional andintellectual responses. The SOVIET METHOD OF MONTAGE includesdifferent types of montages. Three of the most common are theRHYTHMIC, INTELLECTUAL and TONAL.The American and British term for this technique is MONTAGESEQUENCE; it is usually used to suggest the passage of time. 30. INTELLECTUALMONTAGEINTELLECTUAL MONTAGE is an editing technique that uses the quick juxtaposition of shotscombined to elicit an intellectual/symbolic meaning. In the following example from Eisensteins1925 film Strike, a shot of workers attacked is cut with a shot of a bull being slaughteredcreating a metaphor suggesting that the workers are being treated like cattle. This meaningdoes not exist in the individual shots; it only arises when they are juxtaposed. 31. TONAL MONTAGETONAL MONTAGE uses the emotional meaning of the shots to elicitmeaning to elicit a reaction from the audience. The images often carryconventional symbolism. The film used in the KULESHOV EXPERIMENTis an example of TONAL MONTAGE. Here is one from Eisensteins 1925film: Mourn. 32. RHYTHMIC MONTAGEAlthough MONTAGE is typically DISCONTINUOUS, RHYTHMICMONTAGE includes cutting based on CONTINUITY EDITING, creatingvisual continuity from cut-to cut (edit-to-edit). 33. AMERICAN / BRITISHMONTAGE SEQUENCE 34. AMERICAN / BRITISHMONTAGE SEQUENCEPARODY 35. AMERICAN / BRITISHMONTAGE SEQUENCE 36. JUMP CUTA JUMP CUT is a CUT in FILM EDITING in which two sequentialshots of the same subject are taken from camera positions thatvary only slightly. This type of edit gives the effect of jumpingforwards in time. It is a manipulation of temporal space in theduration of a single shot, and fracturing the duration to move theaudience ahead. This kind of cut abruptly communicates thepassing of time as opposed to the more seamless dissolve, whichaims to give the appearance of continuous time and space in thestory world by de-emphasizing editing. JUMP CUTS, in contrast,draw attention to the constructed nature of film. The JUMP CUTwas first made famous by French New Wave director Jean LucGodard in his film titled A Bout de Souffle (Breathless). 37. JUMP CUTThis cut from shot one to shot two makes the subject appear to "jump" in an abruptway. 38. JUMP CUT 39. SCENE TRANSITIONSDirectors and editors need to carry viewers from scene-to-scene,from sequence-to-sequence. This technique ofmovement and narrative progression is called a SCENETRANSITION. These transitions are essential because theyrepresent change, and without change there would be noperception. Film hides its pauses to ensure a steady streamof momentum. It is an act of trickery, and its very tricky to doeffectively. The director and editor do not want to fatigue theviewer, but they also do not want to place distracting breaksin the story.There are many different types of SCENE TRANSITIONS. 40. SCENE TRANSITIONS:THE DISSOLVEThe DISSOLVE is an editing technique where one clip seems to dissolve, or fadeinto the next. As the first clip is fading out, getting lighter and lighter, the secondclip starts fading in, becoming more and more prominent. The process usuallyhappens so quickly and so subtly that the viewer isnt even aware of the transition. 41. FILM TRANSITION:FADE IN / OUTA FADE occurs when the picture gradually turns to a single color, usuallyblack, or when a picture gradually appears on screen. FADE INSgenerally occur at the beginning of a film or scene, while FADE OUTStypically occur at the end of a film or scene. 42. SCENE TRANSITIONS:THE WIPEThe WIPE TRANSITION is the opposite of the DISSOLVE in thatit draws attention to itself. 43. SCENE TRANSITIONS:IRIS WIPEAn IRIS WIPE is a wipe that takes the shape of a growing or shrinkingcircle. It has been used frequently in animated films, like in Looney Tunesor Mickey Mouse cartoons, to signify the end of the story. 44. SCENE TRANSITIONS:IRIS WIPEHeres another famous use of the IRIS WIPE, this time used to open a scene. 45. FAMOUS EDITINGSEQUENCES:NORTH BY NORTHWEST 46. FAMOUS EDITINGSEQUENCES:THE BIRDS (1963) 47. FAMOUS EDITING SEQUENCES:THE SILENCE OF THE LAMBS