Introduction to a pit-less electronic scale “concrete deck”

• The scale to be shown is a B-Tek Side/Rail full electronic

• Platform is 70’x11’ on a slab design foundation

• The foundation has (2) 10’approaches and (2) decent ramp (25’ long)

• The scale utilizes a heavily reinforced concrete deck “Field installed”

• The scale has 6” clearance

Features:• Only (8) double link load cell

mounts in a (4) section scale.

• Safety side rails are part of the scale’s design.

• 6” heavily reinforced concrete deck poured on top of the cross channels

• 11’ wide inside the beams no extra charge.

Forming slab foundation

• Shows 12” forming for the base slab on the scale

Installation of reinforcing

• Reinforcing bar are being installed preparing for monolithic concrete pour

• Notice wider bulkhead area for the approach

Base slab complete

• Shows 12” concrete base slab poured

• Notice reinforcing to tie in the approach slabs

Scale being placed

• Shows the scale being placed (three pieces)

• Notice the bulk head wall on the left

Decent ramp

• Approach is poured the decent ramp is being formed

• The approach is 10’ and the decent ramp is 25’ back to grade

Installation of concrete complete

• Concrete deck, approaches, and decent ramps complete

• Notice easy approach to the scale deck

Install complete

• Scale load cells installed

• Notice built- in side rails on the scale.