introducing…. nclass click image to download intro flyer
TRANSCRIPT
Introducing….
nCLASS
Click Image to download intro flyer
nCLASS Control Packages
What is nCLASS?
• A series of preconfigured nLight control packages designed to be easily specified along side pendant (e.g. Peerless) or recessed (e.g. Lithonia) classroom lighting packages.
• Packages are explained and illustrated in detail through a series of design worksheets.
• The worksheets also provide step-by-step instructions that simplify ordering.
nCLASSD-2
nCLASSC-2
nCLASSB-2
nCLASSA-2
nCLASSD-3
nCLASSC-3
nCLASSB-3
nCLASSA-3
nCLASS Control Packages – Features
Specifier Friendly…• Simple to follow worksheets make design quick and consistent• Easily matched with pendant or recessed lighting packages• Seamless integration into a building or campus-wide nLight-enabled
lighting control network
Contractor Friendly…• Each room’s devices ship bundled together making job site logistics
easy• All wall stations are low voltage, no line voltage wires below the ceiling• All devices interconnect via standard CAT-5 networking cables• No sensor sensitivity adjustments required• Plug’n’Play… all functionality is preconfigured… power up and walk
away
User Friendly…• Intuitive wall controls require less wall space than other solutions• Not limited to factory configuration, operation can be modified
without tools once installed
nCLASS Control Worksheet – Page 1 (e.g. nCLASSA-3)
nCLASS Control Worksheet – Page 1 cont. (e.g. nCLASSA-3)
Example Riser Diagram
nCLASS Control Worksheet – Page 1 (e.g. nCLASSD-3)
nCLASS Control Worksheet – Page 1 cont. (e.g. nCLASSD-3)
nCLASS Control Worksheet – Page 2 (e.g. nCLASSA-3)
• Each step of ordering options requires a selection
• After making choice from the 6 steps, a fully defined classroom controls package is specified
• Orderable package model number is created
• Worksheets can also be used to collect specifications for a projects not requiring “pre-configured “kit” approach
1
23456
Package Number (nCLASSA)
Model Number Structure
Step 1: Indicate Lighting to be controlled (choose 1)
Step 2: Indicate Teacher Control Station Option (choose 1)
Step 3: Indicate Entrance Station Requirement (choose 1)
Step 4: Choose Occupancy Sensor Coverage (choose 1)
Step 5: Include Preterminated CAT5 Cable Bundle
Step 6: Choose Color of Wall Stations (choose 1)
© 2013 Sensor Switch