intervalos de mantenimiento 966h

8/13/2019 Intervalos de Mantenimiento 966h

1/4

Shutdown SIS

Previous Screen

Product: WHEEL LOADER

Model: 966H WHEEL LOADER A6J

Configuration: 966H WHEEL LOADER A6J01801-UP (MACHINE) POWERED BY C11

Operation and Maintenance Manual966H and 972H Wheel LoadersMedia Number -SEBU7887-18 Publication Date -01/04/2012 Date Updated -16/04/2012

i04876450

Maintenance Interval Schedule

SMCS -7000

Ensure that all safety information, warnings, and instructions are read and understood before anyoperation or any maintenance procedures are performed.

The user is responsible for the performance of maintenance. All adjustments, the use of properlubricants, fluids, filters, and the replacement of components due to normal wear and aging areincluded. Failure to adhere to proper maintenance intervals and procedures may result indiminished performance of the product and/or accelerated wear of components.

Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST,

in order to determine the maintenance intervals. Products that operate in severe operatingconditions may require more frequent maintenance. Refer to the maintenance procedure for anyother exceptions that may change the maintenance intervals.

Note: The aftertreatment system can be expected to function properly for the useful life of theengine (emissions durability period), as defined by regulation. All prescribed maintenancerequirements must be followed.

Note: Before each consecutive interval is performed, all maintenance from the previous intervalmust be performed.

Note: If Cat HYDO Advanced hydraulic oils are used, the hydraulic oil change interval isextended substantially. SOS services may extend the oil change even longer. Consult your Catdealer for details.

The following guidlines shoud be followed if the service hours are not met:

Items listed between 10 and 100 service hours should be performed at least every 3 months.

Items listed between 250 and 500 service hours should be performed at least every 6 months.

Items listed between 1000 service hours and 2500 service hours should be performed at leastevery year.

Pgina 1 de 4966H WHEEL LOADER A6J01801-UP (MACHINE) POWERED BY C11(XEBP...

01/06/2012https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...


2/4

When Required

Automatic Lubrication Grease Tank - FillBattery or Battery Cable - Inspect/ReplaceBucket Cutting Edges - Inspect/ReplaceBucket Hinge and Lift Arm Clearance Shims - Inspect/Adjust/Replace

Bucket Tips - Inspect/ReplaceCamera - CleanCircuit Breakers - ResetEngine Air Filter Primary Element - Clean/ReplaceEngine Air Filter Secondary Element - ReplaceEther Starting Aid Cylinder - ReplaceFuel System - PrimeFuses - ReplaceHigh Intensity Discharge Lamp (HID) - ReplaceOil Filter - InspectPallet Fork - InspectRadiator Core - CleanRide Control Accumulator - CheckSecondary Steering - TestWindow Washer Reservoir - FillWindow Wiper - Inspect/Replace

Every 10 Service Hours or Daily

Backup Alarm - TestCooling System Coolant Level - CheckEngine Oil Level - Check

Fuel System Primary Filter (Water Separator) - DrainHydraulic System Oil Level - CheckQuick Coupler - CheckSeat Belt - InspectTransmission Oil Level - CheckWindows - Clean

Every 50 Service Hours or Weekly

Bucket Lower Pivot Bearings - LubricateCab Air Filter - Clean/Replace

Fuel Tank Water and Sediment - DrainTire Inflation - Check

Every 100 Service Hours or 2 Weeks

Axle Oscillation Bearings - LubricateBucket Linkage and Loader Cylinder Bearings - LubricateBucket Upper Pivot Bearings - LubricateLogging Fork Clamp - LubricateSteering Cylinder Bearings - Lubricate




3/4

Initial 250 Service Hours

Electronic Unit Injector - Inspect/AdjustEngine Oil Sample - ObtainEngine Valve Lash - CheckEngine Valve Rotators - Inspect

Transmission Oil Filter - Replace

Every 250 Service Hours

Drive Shaft Support Bearing - Lubricate

Every 250 Service Hours or Monthly

Battery - CleanBelt - Inspect/Adjust/ReplaceBrake Accumulator - Check

Braking System - TestCooling System Coolant Sample (Level 1) - ObtainDifferential and Final Drive Oil Level - CheckDrive Shaft Spline (Center) - LubricateEngine Crankcase Breather - CleanEngine Oil Sample - ObtainQuick Coupler - Lubricate

Every 250 Service Hours or 3 Months

Engine Oil and Filter - Change

Pallet Fork - LubricateSteering Column Play - Check

Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)

Cooling System Coolant Sample (Level 2) - Obtain


Transmission Oil Filter - Replace


Differential and Final Drive Oil Sample - ObtainEngine Oil and Filter - ChangeFuel System Primary Filter (Water Separator) Element - ReplaceFuel System Secondary Filter - ReplaceFuel Tank Cap and Strainer - CleanHydraulic System Biodegradable Oil Filter Element - ReplaceHydraulic System Oil Filter - ReplaceHydraulic System Oil Sample - Obtain

Transmission Oil Sample - Obtain




4/4


Drive Shaft Universal Joints - Lubricate


Articulation Bearings - LubricateBattery Hold-Down - TightenRoading Fender Hinges - LubricateRollover Protective Structure (ROPS) - InspectSteering Pilot Oil Screen (Command Control Steering) - Clean/ReplaceTransmission Oil - Change

Every 2000 Service Hours or 1 Year

Brake Discs - CheckDifferential and Final Drive Oil - Change

Electronic Unit Injector - Inspect/AdjustEngine Valve Lash - CheckEngine Valve Rotators - InspectHood Tilt Actuator - LubricateHydraulic System Oil - ChangeHydraulic Tank Breaker Relief Valve - CleanService Brake Wear Indicator - CheckSteering Column Spline (Command Control Steering) - Lubricate

Every Year

Cooling System Coolant Sample (Level 2) - ObtainReceiver Dryer (Refrigerant) - Replace


Steering Column Spline (HMU Steering) - Lubricate

Every 3 Years

Seat Belt - Replace

Every 6000 Service Hours or 3 Years

Cooling System Coolant Extender (ELC) - AddCooling System Water Temperature Regulator - Replace

Every 12 000 Service Hours or 6 Years

Cooling System Coolant (ELC) - Change

Copyright 1993 - 2012 Caterpillar Inc.

All Rights Reserved.

Private Network For SIS Licensees.

Fri Jun 1 10:28:09 EST 2012


01/06/2012https://sisweb cat com/sisweb/sisweb/techdoc/techdoc print page jsp?returnurl=/sisw

intervalos de mantenimiento 966h

Documents