interior shutter design options - b&b wood...

B&B Wood Products inc.

[email protected] ©2012 B&B Wood 1

Interior Shutter Design Options

Shutterettes: Traditional 1-1/4” Slat: See page 4 for stock sizes

Plantation: Slat Sizes- 1¼”, 1¾”, 2½”, 3½”, 4½ “See page 5

Arch Top Panels

Hardware - See pages 10-11

Raised Panels & More (page 7)

Prefinished Pre-Assembled Panels

• Green Shutters - Made from Madera Lumber - No VOC emissions

• Bamboo Shutters - Made from sustainable Bamboo

• Basswood Shutters - Lightweight and durable

• Poly Shutters - Ideal for moist areas• Aluminum Shutters - Interior or Exterior

See pages 8-9Fabric Panels

See page 12 for sizes


[email protected] ©2012 B&B Wood2

Page Left Blank




Interior Shutters - Louver Slat Designs

1-1/4” Traditional (page 12) - Louver Protrusion 5/8”

1-3/4” Plantation (page 13) - Louver Protrusion 7/8”

2-1/2” Plantation (page 13) - Louver Protrusion 1-1/8”



Plantation Slat Options: 2-1/2” & 3-1/2” see page 6

Also available in 4-1/2”

Slat options: ADD to plantation pricing 18%

Shape 2

Shape 1

Shape 3

Also available in 1-3/4”

Shape 4

Shape 14

Shape 15

Curved

Shape 6

Louver Protrusion: Traditional 5/8”; Plantation: 1-3/4”: 7/8”; 2-1/2”: 1-1/8”; 3-1/2”: 1-5/8” 4-1/2”: 2-1/4”

Note: Contemporary Slats are available inlieu of plantation slats (same slat widths). No Upcharge.

Contemporary Slats



Traditional ¾” Thick Movable Slat Interior Shutterettes

Panel Width- Size Per Panel (hardware sold separately)

Pane

l Hei

ght

TRIM stock panels to exact size: - ADD $ per panel. LIMITS: Stiles: 1/4” per stile. Rails: 1-1/2” per rail.SPECIFICATIONS: Panels over 40” tall have center rails. For no center rail in lengths 40”-54” add %

CUSTOM HANGING STRIPS: $2.50 LF

6" 7"-8" 9"-10" 11"-12" 13"-14" 15"-16" 17"-18" 19"-20" 21"-24"16" $ $ $ $ $ $ $ $ $ 20" $ $ $ $ $ $ $ $ $ 22" $ $ $ $ $ $ $ $ $ 24" $ $ $ $ $ $ $ $ $ 26" $ $ $ $ $ $ $ $ $ 28" $ $ $ $ $ $ $ $ $ 30" $ $ $ $ $ $ $ $ $ 32" $ $ $ $ $ $ $ $ $ 36" $ $ $ $ $ $ $ $ $ 38" $ $ $ $ $ $ $ $ $ 40" $ $ $ $ $ $ $ $ $ 44" $ $ $ $ $ $ $ $ $ 48" $ $ $ $ $ $ $ $ $ 52" $ $ $ $ $ $ $ $ $ 56" $ $ $ $ $ $ $ $ $ 60" $ $ $ $ $ $ $ $ $ 64" $ $ $ $ $ $ $ $ $ 68" $ $ $ $ $ $ $ $ $ 72" $ $ $ $ $ $ $ $ $ 76" $ $ $ $ $ $ 4 $ $ 80" $ $ $ $ $ $ $ $ $

Stain Grade Poplar: 1-1/4” Slats Paint Grade Poplar Deduct 15%. Specie Option:

Shaded prices are non-stock. Shutter widths that show stock are stocked in 1” increments and may be trimmed for an additional charge as listed below. Panel heights that show stock are stocked as listed. Panels maybe special ordered at no additional cost (in lieu of trimming) in 1/8” increments. Use the next larger size.

Determine your method of installation. Consult our install brochure and we will custom size your hanging strip.

Hanging Strip Option : See www.bbwood.com for all of the typical installation diagrams.

Image of shutters up to 40” tall. Taller panels have a cross rail centered.

Spring loaded, E/Z out rods allow easy insertion and removal of fabric. Fabric not included.

UNIVERSAL GOTHIC

FABRIC PANELS

Pricing: same as above chart. Fabric panels are special order.

Thickness 1-1/8” & 1-1/4” available.




Plantation ¾” Thick Movable Slat Shutters B&B Wood Products inc.

Panel Width- Size Per Panel

Pane

l Hei

ght

Panels may be ordered in 1/8” increments. Use the next larger size for the List Price. Special Order

Specify Louver (Slat) Size: 1¼”, 1¾”, 2½”, 3½” or 4½ “

Call for pricing on 1-1/8” and 1-1/4” thick.

6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30"18" $ $ $ $ $ $ $ $ $ $ $ $ $20" $ $ $ $ $ $ $ $ $ $ $ $ $22" $ $ $ $ $ $ $ $ $ $ $ $ $24" $ $ $ $ $ $ $ $ $ $ $ $ $26" $ $ $ $ $ $ $ $ $ $ $ $ $28" $ $ $ $ $ $ $ $ $ $ $ $ $30" $ $ $ $ $ $ $ $ $ $ $ $ $32" $ $ $ $ $ $ $ $ $ $ $ $ $34" $ $ $ $ $ $ $ $ $ $ $ $ $36" $ $ $ $ $ $ $ $ $ $ $ $ $38" $ $ $ $ $ $ $ $ $ $ $ $ $40" $ $ $ $ $ $ $ $ $ $ $ $ $42" $ $ $ $ $ $ $ $ $ $ $ $ $44" $ $ $ $ $ $ $ $ $ $ $ $ $46" $ $ $ $ $ $ $ $ $ $ $ $ $48" $ $ $ $ $ $ $ $ $ $ $ $ $50" $ $ $ $ $ $ $ $ $ $ $ $ $52" $ $ $ $ $ $ $ $ $ $ $ $ $54" $ $ $ $ $ $ $ $ $ $ $ $ $56" $ $ $ $ $ $ $ $ $ $ $ $ $58" $ $ $ $ $ $ $ $ $ $ $ $ $60" $ $ $ $ $ $ $ $ $ $ $ $ $62" $ $ $ $ $ $ $ $ $ $ $ $ $64" $ $ $ $ $ $ $ $ $ $ $ $ $66" $ $ $ $ $ $ $ $ $ $ $ $ $68" $ $ $ $ $ $ $ $ $ $ $ $ $70" $ $ $ $ $ $ $ $ $ $ $ $ $72" $ $ $ $ $ $ $ $ $ $ $ $ $74" $ $ $ $ $ $ $ $ $ $ $ $ $76" $ $ $ $ $ $ $ $ $ $ $ $ $78" $ $ $ $ $ $ $ $ $ $ $ $ $80" $ $ $ $ $ $ $ $ $ $ $ $82" $ $ $ $ $ $ $ $ $ $ $ $84" $ $ $ $ $ $ $ $ $ $ $ $

Stain Grade PoplarSpecie Option:

For additional options See page 6 including: Rabbeting; Hinge mortising; Offset controls; Raised Panel Bottom; Beading; Exterior Glue & Exterior Screws; Large bottom rails.

Paint Grade Poplar Deduct 15%.



Options for pages 4-5

*Notes: 6” is the smallest 3/4” thick shutter made. These can be trimmed to 5-1/4”. Use trim charge above on stock panels and custom panels

Pre-finishing: Panels shown on pages 4-5 can be primed, painted or stained (see below). Alternately for sets of shutters that are pre-hinged painted or stained see page 8-9

Description ListTrim List applies to Stock* Shutters (plantation & custom shutterettes can be ordered in 1/8" increments - apply

charge only if trimming to 1/16" tolerance)$

Rabbeting Panels overlap each other for light control. Rabbeting on custom size shutters (3/4", 1-1/4" only). Note price applies to panels up to 80" tall

$

Mortise For B&B hinges; per hinge (hinge not included in price see page 18) $Beading Beading is done on the outer edge of the Stile. $Extra Rail Divider Rail for traditional shutters 40" and under & for plantation 54" and under; specify location

Panel widths 18" & under $ Panels over 18" thru 24" wide $Panels over 24" thru 30" wide $Panels over 30" thru 36" wide $

Move Rail For panels that come with a rail centered the cost to move that rail $Flush Rails For traditional shutters (top and bottom rail same thickness as stiles) Add percent to list 30%

For plantation shutters Add percent to list 17%Offset Rod Control rod is centered 2-1/4" from the inner edge of the stile unless specified $ Independent Rod Split in approximate center unless specified otherwise. $ Sandblasting Add to list price (works best on pine) 29%Prime Interior Call for Pricing on primed or primed and sanded. $ Prime Exterior Call for Pricing (suggest use of pine wood or see poly shutters on page 17) $

PaintingBenjamin Moore Satin Impervo Colors in White & Linen are standard (call for paint chart). Custom paints available. $

Staining Standard stains are Minwax: Golden Pecan; Early American; Red Mahogany; Golden Oak; Cherry; Dark Walnut; Fruitwood & Red Oak. Stain rings are available for a $15 charge. Custom staining is available. $

Raised Panel Bottom

To add a raised panel to any louver design add

up to 15" wide shutter $ over 15" thru 20" wide $over 20" thru 24" wide $over 24" thru 28" wide $over 28" thru 36" wide $

Large Bottom Rail Applies to shutters 76" thru 90"

$

Applies to shutters over 90" thru 108" $



Additional Options

Zero Clearance Rod Control used when louver protrusion interferes with

windows or doors.

Movable Louvers with No Rod To change the architectural appearance of your

plantation shutters you can order the shutter with no visible rod control. Slats are moved by

hand.

Raised Panel Interior Shutters many configurations to choose from.



Green Shutters - Made from Madera Lumber

• NoVOCemissions • AvailablePaintedwithwaterbasedpaint. • AvailableStainedwithlowVOCstain.• Movablelouversize:2-1/2”,3-1/2”&4-1/2”• Shutterthickness1-1/16”• Productiontime2weeks(4weeksfinished).

Bamboo Shutters - Made from sustainable Bamboo

• Unfinished• Availablewithnaturalfinish.• Movablelouversize:3-1/2”• Shutterthickness1-1/16”• Productiontime2weeks(4weeksnatural finish).

BasswoodShutters-Lightweightanddurable• PrimedandSanded• Availablepaintedorstainedorunfinished staingrade.• Movablelouversize:2-1/2”,3-1/2”&4-1/2”• Shutterthickness1-1/16”• Productiontime2weeks(4weekspainted orstained).

Pre-assembled Interior Shutters



Aluminum Shutters - Interior or Exterior

• Whiteorlinenfinish with4-sidedframes• Clearanodized, champagneandwood tonefinishesavailable.• Movablelouversize: 2-1/2” and 3-1/2”• Shutterthickness1”• Productiontime4weeks.

Poly Shutters Ideal for moist areas

• Whitefinish• Customcolorsavailable.• Movablelouversize: 2-1/2”, 3-1/2” & 4-1/2”• Shutterthickness1-1/16”• Productiontime2weeks.

Pre-assembled Interior Shutters



H6148H6144

Cabinet & Shutter Hardware

H6155

1-1/2”

5/8”

1-3/8”

5/8”

1-3/8”

1-1/2”

5/16” 3/4”

1-1/2”

3/4”

Inter-panel Hinge Tight Pin

Brass Finish Price per pair

Wrap Around Loose Pin

Brass or Nickel Price per pair

Mortise Hinge Loose Pin

Brass or Nickel Price per pair

#H298: 4-Panel Set2 pair Brass Mounting hinges 2 pair Brass Inter-panel hinges 2 Porcelain Knobs 1 Brass Hook

H155Wrap Around Hinge Loose

Pin Brass Finish Price per pair

For 5/8” to 3/4” Cupboard Doors

Hinges for 3/4” Shutter Thickness

H6170 H1255-15Mortise Hinge

Loose Pin Brass Finish Price per pair

1-1/2”Heavier gauge than 6148

Hinges for 1-1/8” & 1-1/4” Shutter Thickness

H1256Bright Brass,

Ant. Brass

Inter-panel Mortise Hinge Loose PinH1255-25

2-1/2”

H16Brass or Nickel

Inter-panel Mortise Hinge Loose Pin

Heavier gauge than H16Satin Brass

Hanging Hinge Loose Pin

H24Bright Brass,

Nickel

62441 for 1-1/8”

H22 for 1-1/4”

Wrap Around Hinge Loose Pin

Brass

Bright Brass, Nickel

H6165Inter-Panel

Hinge, Loose Pin Brass Finish Price per pair

Use with rabbeted Panels

3/4”

1”

7/16”

7/16” 7/16”

1-1/2”

3/4”

1-1/2”

2-3/8”

1-1/2”

- Price per Pair

Extension Hinge Loose Pin

Brass Finish Price per pair



Cabinet & Shutter Hardware

Hook & Knob SetWhite Porcelain Knobs

Set includes 2 knobs (3/4” dia.), 1 hook

K6105

K6115

Hook & Knob SetSolid Brass Knobs

Set includes 2 knobs (5/8” dia.), 1 hook

Shutter Hook & Knobs

Shutter Knobs & Pulls

K218

Concave Knob Bevel Design

Brass-Chrome- Antique Brass

Sold Each

Ring PullDie Cast

2-7/16” dia.Bright Brass Sold Each

K626

RP2716

Knob 7/8”Bright Chrome

7/8” Diameter Sold Each

BreadBoardScrew#BBS

Order when applying knob to the face of the shutter where no screw shows on the back

Magnetic Catch & Touch Latch

TL5300

MC5100

Touch Latch - Zinc Push action opens and closes door - Eliminates the need for

knobs. Sold Each

Magnetic Catch - Brown Federal Spec. F1079. Sold Each

Diameter depends on stock: 1-1/2” or 2”

1-3/4”

Shutter Bar & Knobs

Polished Brass, Antique Brass* and Polished Chrome*

SB30 - Shutter Bars OnlySB30K - Shutter Bars & Knobs

Note: Drawing is a representation. Actual item may differ.

*subject to availability

15 lb. per panel capacity - Call for heavier hardware.

Bifold Hardware - For 3/4” to 1-1/8” panels

B1740BS Hardware Set

For panels 6” to 18” wide and 80” high.

Finished Opening is Door Height +1-5/8”

1-1/32”

5/8”

B170A Alum. TrackMounts directly to head

jamb or cabinet. Available up to 192”. Price LF

B1742 HangerFor multi-folding units

order an additional hanger for each door. Price Each.

Hardware set includes enough hardware for 1 pair of shutters. Includes one 1742 hanger; 1710 pivot lock; 1701 Top pivot;1707 Bottom

pivot, pair of hinges; 1713 snubber; 1741 jamb bracket and instructions. Price per Set

Parts are brasstone steel.

interior shutter design options - b&b wood...

Documents