Intensive Care Ventilator & Patient Monitor

Product Catalogue

ICU Ventilator

· MV2000, MV2500

· MC200

· MS10

High Flow Therapy

· HFT500

Transport Ventilator

· MTV1000

Patient Monitor

· MP1300

· MP1000NTP

· MP800

EtCO2 Monitor

· MP800C

Pulse Oximeter

· MP570T

· MP110 Plus

· MP111

Veterinary Monitor

· MP1000Vet

· MP800Vet

EMR System

· MP601

· HIS(EMR) System

Product line upMEK-ICS CO., LTD

Intensive Care Ventilator & Patient Monitor Product Catalogue

- 2 - - 3 -

Specifications

SU:M SERIES

Alarm Setting Parameters (MAIN)

Intensive Care Ventilator & Patient Monitor ICU Ventilator

- 4 - - 5 -

Feature SU:M1 SU:M2 SU:M3 SU:MHFV

MODE

VACV

PACV

SIMV

SPONT

Apnea Backup

Mask Ventilation (Non-Invasive)

PRVC

tBi-Level

Auto Vent®

High Frequency Ventilation (SHFV/DHFV)

Nubulizer Auto Nubulizer

Optional

O2 Stream (with Nasal Cannular)

Hemo-Dynamics (SpO2& EtCO2)

Proximal Sensor (Adult&Neonate)

TCPL + PV-TOOL

Standby Trend

Vent Mode Vent Setting

Vent Run X-Y Graph

Intelligent Technology

System Mechanism

Block Type Pneumatic SystemHigh performance Block type pneumatics and microprocessor controlled electronic hardware system, allows sensitive and precise breath delivery for critically ill patients.

Advanced Proportional Solenoid Valve (PSOL) TechnologyEnsures faster, safer and accurate gas delivery which also reduces the Work of Breathing and helps in improving Synchrony.

Active Exhalation ValveActively controls and maintains the target pressure. It allows unrestricted breathing during both inspiratory as well as expiratory phases of the breathing cycles. This valve also vents excess pressure due to Pressure overshoot, patient’s cough, etc. This promotes better Patient - Ventilator Synchrony and potentially decreases the need for sedation.

Differential Type Flow SensorSensor is very rugged and reliable offering exceptional response, as well as, accurate monitoring, even when used with a Nebulizer.Designed with a high end pneumatic base, and using a Differential Type Flow Sensor, the SU:M series assures the user of long service time intervals, The low cost of spares and very few consumables provides the customer with very affordable cost of ownership.

TrendTrend mode simultaneously displays the past records of patient’s statues in numeric, as well as, graphical form. By adjusting the cursor, the user can revew the monitored data for any specific time, in the past 72 hours. The built in trend function record up to 11 parameters such as Volume, Pressure, Flow etc, with a selectable time interval if 1/10/30/60 breaths.

Advanced Technology

Optimize System

Automatic Measurement of both Altitude and Temperature: An Aritifcial Intelligence internal sensor to measure Altitude and Temperature.The volume of atmosphere is changeable depending on Height, Humidity and Temperature. Its measurement result is relative considering the environments condition. Most conventional Ventilators measures Temperature and Altitude by each users, which can be inaccurate, however with MEKICS's internal acute Altimeter and Thermometer, a volume for each patient will have absolute precision.

Auto Peak Flow: Automatic setup for its convenience. Every person has a different weight, lung capacity and breathing period. Until now, SU:M series has its auto measruement function to calculate Ideal Body Weight, Breathing Volume and Inspiration period for each patient to indicate a Auto Peak Flow data. Just touch the screen for results.

Maintenance and System Check with an unique program: Susceptible Maintenance Program for Technical Support.Due to its feature, life-saver, the accuracy is the most significant fact to handle. For a fine data adjustment, MEK ICS provides the strong maintenance program for easy access and control.

Mask Ventilator

Mask Ventilation is the most basic, yet the most essential, skill in airway management. It is the primary technique of ventilation tracheal intubation or insertion of any airway device. Its most unique role, however, is as a rescue technique for ventilation should tracheal intubation fail or prove difficult. MEK Mask Ventilation on/off mode maximizes its leakage compensation up to 50LPM.

Additional Options

▪ O2 Stream

▪ Proximal Sensor

▪ Hemo-Dynamics function

Intelligent Ventilator for ICUThe intelligent Ventilator has its functions to be adaptable for ICU. However, MEK ICS's ICU Ventilator, SU:M series, is compatible to cover all ages from an Adult to a Neonate in an Intensive Care Unit. All in One.

Proximal Sensor port

EtCO2 and SpO2 port

Intensive Care Ventilator & Patient Monitor ICU Ventilator

- 6 - - 7 -

Intensive Care Ventilator & Patient Monitor ICU Ventilator

- 8 - - 9 -

MC200Air Compressor

Air Compressor Unit - MC200

MC200 is originally designed to use our ICU ventilators. In case of using other manufacturer’s ventilator to MC200, it is recommended to check the maximum capacity of flow consumption of the connected ventilator and the maximum capacity of flow production of MC200.

▪ Compact size

▪ Portable type for easy install and move

▪ Low noise by double silencer system

▪ Absorption of vibration & dust-protection applied structure enable MC200 to perform superior vibration coefficient with extremely quiet operation

▪ User convenient display

▪ Total used time display enable timely effective maintenance efforts

▪ Easy maintenance by cartridge type replacement of service parts

▪ Parallel connection to WALL AIR is available

▪ Safety solution useful for preventive maintenance (e.g. Temperature warning system & manual shut down is available)

▪ Available to operate in connection with maximum 2 units of ventilator simultaneously (Use on MEKICS ICU ventilator series)

Adaptive Scavenging System - MS10

secondary infection.

MS10 is differ from a passive system that is possible to recover 100% gas without flow adjustment and it is not effected on the main device(Ventilator) even at high flow by active control and internal high compliance.

Intensive Care Ventilator & Patient Monitor Medical compressor Adaptive Scavenging System

- 10 - - 11 -

Intensive Care Transportable Ventilator

Pneuma

Graphic Waveform

Alarm

Alarm Setting Parameters (MAIN)

High tidal volume Expiratory volume

High respiration rate

Low respiration rate

High peak airway pressure

Low peak airway pressure

High O2 %

Low O2 %

Apnea

Ventilator in-operation

(Option, SpO2)

High SpO2

Low SpO2

High pulse rate (SpO2)

Low pulse rate (SpO2)

Key, Indicators

Inspiration hold Measures patient's lung compliance and resistance

Elasticity, Time constant

Key lock Key & LCD Touch Screen Lock

Graph freeze

Alarm silence Mutes audible alarms for 2 minutes

Alarm reset Clears visual indicators and messages

Electrical Requirements

Power AC : 100-230 VAC, 50/60 Hz (Free voltage)

DC : 10.8V 8.8A, Internal battery

Provides Max. 180 minutes of normal operation

Physical Characteristics

Weight 6.1 kg (main unit)

Dimensions 25 x 15.6 x 37.1 (Width x Depth x Height) cm

Environmental Requirements

Atmospheric condition 700 to 1060 mbar (10.2 ~ 15.4 psi)

Altitude -443 ~ 3048 m (-1350 ~ 10,000ft )

Height Up to 6560 m (20,000 ft )

Conditions of use 10 to 40 (50 ~ 104 )

Relative humidity 10 to 85 %

Pneumatic Requirements

Oxygen inlet supply pressure 2.46 to 6.32 kgf/cm2 / 2.4 to 6.2 bar (35 to 90 psig)Feature

Pneuma2 Pneuma1 PneumaCare PneumaCareO2Dual limb Single limb Dual limb Single limb Single limb Single limb

MODE

PACV

VACV

VSIMV

PSIMV

Spont+

Auto

PRVC

O2 Stream®

ACPAP+

ABIPAP+

Peripherals

High PressureOxygen MixerLow Flow O2

Input

Proximal Pressure Input

Exhalation Valve Assembly

Exhalation Drive Line Outlet

OptionalEtCO2

SpO2

Intensive Care Ventilator & Patient Monitor Transport Ventilator Transportable Ventilator

- 12 - - 13 -

Single Limb Ex-valve is marked RED circle.

s

Intensive Care Ventilator & Patient Monitor Transportable Ventilator

- 14 - - 15 -

Home Care.

Transport.

Hospital.

Intensive Care Ventilator & Patient Monitor

Trigger

Pressure

Flow-Machine

Flow-PatientEx.time

=Easy Expiration

PSV

Quick Pause

Encorder for setting parameter 7” Color TFT Touch Screen

LAN, USB RS-232 Upgrade port

Optional : SpO2, EtCO2

Proximal Pressure Line InputExhalation Drive Line Outlet

Built in a High PerformanceBlower System

Transport Ventilator for Acute Care, Sub-Acute Care,Homecare and Transport

Transportable Ventilator

Single limb circuit use

PneumaCare Series

PneumaCare

PACV, PSIMV, VACV, VSIMV, SPONT(SPONT+PS), PRVC, ACPAP+, ABiPAP+ Optional : SpO2, EtCO2

PneumaCareO2

PACV, PSIMV, VACV, VSIMV, SPONT(SPONT+PS), PRVC, ACPAP+, ABIPAP+, O2 Stream® with high flow oxygen supply.With High Pressure Oxygen MixerOptional : SpO2, EtCO2, Nasal Cannula for O2Stream®

ACPAP+

(Adaptive CPAP Plus Pressure Support)®

[ACPAP+ Function] It is developed with high technology which applying to the highest class ICU ventilator and applying for a patent. It is innovated reaserch object ‘comfortable breathing’ in CPAP. MEKICS created unique ACPAP+ technology completed the clinical effect and ‘comfortablebreathing’ simultaneous.

[Principal] Based on the CPAP, it is contrived to minimize of breaths with difficulty in CPAP as induction of airway open, pressure support that is decreased patient’s effort in inspiration, and active break (rapid pressure interruption) that makes easy of expiration.

[Technology]

It is decreased Inspiratory Phase Work of Breathing through Inspiratory Trigger function and Pressure Support function. It makes possible to inhalation with small effort of patient (WOB_inspiration). It is decreased Expiratory Phase Work of Breathing through Ex_Sesnse. In this time, interrupt the flow rapidly and supply brk_time (Expiration Break Time). It makes possible to exhalation with small effort of patient (WOB_expiration) and minimize of breaths with difficulty.

* (brk_time: Expiration Break Time): Application to most convenience respiration pattern.

- 16 - - 17 -

Products Line Up

Of Respiratory CareHigh Flow Trerapy

OmniOxThe HFT500 is the total solution for “Successful Non-Invasive Respiratory Care.”

High Flow TrerapyOmniOxThe HFT500 is the total solution for “Successful Non-Invasive Respiratory Care.”

High Flow Therapy

It is non-invasive breathing treatments to improve of lung oxygenation that as supplying the heated and humidified oxygen requirements that exceed the patient’s inspiratory flow rate through nose, reduce the intake of breath work, increase the functional residual capacity by rising of PEEP, optimize the nasal and the status of the mucosa of the upper respiratory track, and reduce the residual gas exhalation of dead space anatomically.

High Flow Trerapy Pruducts Line Up

- 19 - - 18 -

0,30~250bpm

0.05~20%

0.1

45

0

20

10~500~25

250

50

2

0.1

45

9

0

Dose calculator

Intensive Care Ventilator & Patient Monitor Patient Monitor Patient Monitor

- 20 - - 21 -

30~250

0

1

45

30

0

0~15040

41~70

1

45

250

0

10

Intensive Care Ventilator & Patient Monitor Patient Monitor Patient Monitor & Pulse Oximeter

- 22 - - 23 -

250

1

250

0

Veterinary Monitor

MP1000NTP VetVeterinary Monitor

MP800 Vet

• 10.4” superior resolution TFT color LCD • 7 waveform display• ECG+Resp, SpO2, NIBP, 2-IBP, 2-Temp.• Full Arrhythmia analysis and ST segment analysis• Save up to 30 event management• Virtual screen system for various viewing• 72-hours tabular and graphic trend

• 6.4” high quality resolution TFT color LCD• 3/5-lead ECG, RESP, SpO2, NIBP, TEMP.• Arrhythmia Analysis and ST segment analysis• Pacemaker Detection• Virtual screen system for various viewing• 72hours tabular and graphic trend• ECG lead auto detection (3 lead or 5 lead)

ECGChannel 3 channels3 leadwire I, II, III5 leadwire I, II, III, aVR, aVL, aVF, CGain 2.5, 5, 10, 15, 20 mm/mVHeart rate 0, 20 ~ 300bpm

RespirationMethod ECG Lead(selectable)Respiration rate 0, 2 ~ 150 bpm

SpO2

Range 0 ~ 100%Pulse Rate 0, 30 ~ 300bpm

Non-invasive blood pressureMeasurement technique OscillometricMeasurement range 0~300 mmHgDisplay parameters Systolic, Diastolic, Mean

Last 3 measurement

Invasive blood pressureNumber of channel Max. 2channelsMeasurement range -50~300mmHgLabel ART, FEM, PA, CVP, LA, RA, ICP, SP

2-TemperatureSensor YSI 400 series compatible(optional)Measurement range 0~50°C

EtCO2(optional) Main stream or Side streamMeasurement range 0-99 mmHgRespiration range 0~150 bpm

ECGChannel 1 channel3 leadwire I, II, III5 leadwire I, II, III, aVR, aVL, aVF, CGain 2.5, 5, 10, 15, 20 mm/mVHeart rate 0, 20 ~ 300 bpm

RespirationMathod ECG Lead(selectable)Respiration rate 0, 2 ~ 150 bpm

SpO2

Range 0 ~ 100%Pulse Rate 0, 25 ~ 300bpm

Non-invasive blood pressureMeasurement technique OscillometricMeasurement range 0~300 mmHgDisplay parameters Systolic, Diastolic, Mean

Last 3 measurement

TemperatureSensor YSI 400 series(optional)Measurement range 0~50°C

Intensive Care Ventilator & Patient Monitor Patient Monitor & Pulse Oximeter Veterinary Monitor

- 24 - - 25 -

Intensive Care Ventilator & Patient Monitor Central monitoring & EMR system

Products Line Up

Of Patient Monitor and Pulse Oximeter

- 26 - - 27 -

Pruducts Line Up

Specification subject to be changed without notice

P/N : MEK-CAT-1310(Ver2.3) Printed in KOREA Oct. 2013 Oct.

2013

. Des

igne

d by

BizP

lus

AD In

c. w

ww.b

izplu

sad.

co.k

r

Head Office. 40, Toegyegongdan 1-gil, Chuncheon-si, Gangwon-do, Korea 200-944Seongnam Office. A-5F, woolim lions valley 5th, 302 Galmachi-ro, Jungwon-gu, Seongnam-si,

Gyeonggi-do, Korea 462-807TEL. 070-7119-2520 FAX. 031-735-2761 www.mek-ics.com e-mail. sales@mek-ics.com