integration of commend’s - smart ingenierie developpement · commend’s intercom stations. the...
TRANSCRIPT
Address: 7, rue aux Prêtres - 78790 Montchauvet - France Phone: +33 (0)1.30.92.40.99 - Fax: +33 (0)1.30.94.14.54 - Mail: [email protected]
www.sidfrance.eu
Intercom systems supported
Advanced features
SmartDevice can handle the following features when it is connected to one or several Commend servers:
Connection management
Driver compatible SmartDevice 2.0
SmartDevice handles automatic reconnection in case of network failure
We are constantly expanding the list of our products. The full list is available upon request.
Events managementSmartDevice allows the management of the following events: • Alarm Message events• Call Request events• Call Transfer events• Cam Control events• Conversation events• Door Message events• Feed Back events• Input Message events • Output of dialing events• PA events• Privacy events• Radio Conference events
Actions managementSmartDevice enables to trigger the following actions:• Build conversation • Cancel conversation• Output blink• Ouput close• Ouput invert• Ouput open• Start conference• Stop conference • Start preloaded playback
Equipment integration
The integration of the ICX intercom system allows the user to link the systems handled by SmartDevice software to Commend’s intercom stations. The communication with the Commend system is established by ICX communica-tion protocol, and is made through TCP/IP network.
• Requires a Commend GE 300 or GE 800 intercom panel, or a virtual appliance VirtuoSIS• Requires a license to use ICX Commend, the license will have to be activated into the intercom server
Requirements
GE 800GE 300IS300
VirtuoSISGE 700GE 200
SmartDevice - Driver Commend
Integration of Commend’sICX intercom system