integrated communication solution – copper

AFC Group’s range of integrated communication

products includes the innovative and patented SMP

Data Communications’ copper cabling solution. An

industry pioneer in copper cabling technology, and now

part of Optical Cable Corporation (OCC), SMP products

are the optimum choice to complement an AFC fibre

network. AFC’s total communications cabling solution

encompasses a full portfolio of fibre optic products,

copper closet, workstation and copper cabling.

integrated communication solution – copper

contents:

cc Copper Closet

Ws Workstation

cu Copper UTP Cable

c o p p e r c l o s e t

SMP Data Communications’ Copper Closet connectivity

solutions offer customers engineering excellence and design

innovation. From patented circuit board technology to 100%

component erformance-tested patch cords, SMP continuously

strives to produce quality connectivity components that offer

reliability and value. This dedication to manufacturing

produces components that exceedingly surpass industry

standards and customer expectations.

contents:cc-2 Limited Axcess

Solution

cc-5 Category 6a Solutions

cc-8 Patch Panels

cc-14 Zone Distribution Solutions

cc-17 Cable Assemblies & Patch Cords

cc-20 110 Blocks

c o p p e r c l o s e t

limited axcess™

Keyed Copper Network Solutions

In part because of the research and development associated with developing a guaranteed 10 Gig system, SMP was able to generate a whole new product line for securing and segmenting network access while continuing to offer superior performance. The patented Limited Axcess™ RJ45 product line offers enhanced network security by providing physically restrictive access to the network using a unique plug and jack interconnect system.

Additionally, SMP’s signature Bezel system and Patch Cord boot combination create multiple levels of keyed access to the network. This break through technology provides enhanced system performance exceeding TIA Category 6a component requirements. Whether your concern is HIPAA, Sarbanes Oxley, Security Clearance or just controlled access to your network, SMP Data Communication’s Limited Axcess™ product line will provide physical control of user access for the network administrator and bandwidth above any copper system available.

• Limited Axcess™ jacks exceed Category 6a component performance requirements

• Two layers of enhanced security may be deployed independently, as either the proprietary plugs and jacks or keyed bezels.

• Prohibits unauthorized access.

• Available in 8 different colored keyed bezel and boot combinations.

• Conversion patch cords are available to connect standard Ethernet hardware to the Limited Axcess™ network.

• UL listed communications circuit accessory.

• Compliant with Power over Ethernet (PoE) requirements

• Contact material - high strength beryllium copper alloy Contact plating - 50 µin gold over nickel

AppliCAtioNS

• 10GBASE-TEthernet

• 1000BASE-TGigabitEthernet

• 100BASE-TXFastEthernet

• 10BASE-TEthernet

• Voice

• BroadbandVideo

• Allotherapplicationsdevelopedfor operation over class E cabling

copper closet cc-2

limited axcess™ patch cords catalog number

LAPC6A - m - - xx YY

cable type plug one plug two plug two Boot length in Feet denotes Boot color

sShielded

KKeyed Boot

mKeyed Plug

KKeyed Boot

See Color Code Chart

uUnshielded

BNon-keyed Boot

a568A Wired

BNon-keyed Boot

B568B Wired

sSlimline Boot

nNo Boot

limited axcess™

limited Axcess™ Jacks

SMP’s patented Limited Axcess™ jacks are the initial component when creating a Limited Axcess secure network. These unique jacks offer an innovative security layer for establishing a physically restrictive network system through keyed configurations and locking keyed bezels. Deployed with the keyed strain relief and plugs found on the Limited Axcess patch cords, the entire system can easily segregate any network segment for physical security. In addition to the security aspect of the Limited Axcess jacks, these RJ45 components exceed TIA Category 6a component performance requirements with a dramatic increase in primary parameter performance.

• Bezels may be applied after installation to lock jacks in place

• Compliant with Power over Ethernet (PoE) requirements

• Contact material high strength beryllium copper alloy; Contact plating – 50 µm gold over nickel

• Available in 8 different colored keyed bezel combinations

• Shielded keystone version available as well – call factory for details

limited Axcess™ patch Cords

The Limited Axcess™ patch cord, with its patented plug technology, is a key component to creating a secure Limited Axcess system. This one-of-a-kind patch cord uses a keyed plug and a unique locking boot to provide two layers of physically restrictive network security. Both these layers of enhanced security may be deployed independently as either the proprietary plugs with corresponding jacks or the keyed

bezels with matching locking boots. In addition, performance exceeds TIA Category 6a component requirements.

• Locking boot applied during manufacturing

• Conversion patch cords available to connect standard Ethernet hardware to the Limited Axcess system

• Available in 8 different colored keyed boot combinations

• Cable color is gray

Ex: lapc6as-mK-as0309 = Limited Axcess™ Shielded Patch Cord, Keyed plug and boot on one side and A wired with Slimline boot on other side, 3 feet, yellow

limited axcess™ Jacks

catalog number description

LA6Axx Limited Axcess™ Cat 6a RJ45 jack with keyed bezel

* Replace “xx” with color code – see color code chart

limited axcess™ color code chart

code color code color

02 Black 06 Gray03 Red 07 White04 Green 08 Orange05 Blue 09 Yellow

copper closet cc-3

limited axcess™

limited Axcess™ Secure Faceplates

To create truly limiting admission to secure networks, SMP went one step further in developing the Limited Axcess™ product line and created faceplates that offer an added layer of defense for segregating specific networks. The SMP Secure faceplate is double layered with the outer stainless steel faceplate acting as a locking mechanism, securing the bezels onto the jack and preventing access for removal.

• Stainless steel construction for corrosion resistance

• Tamper proof screws included

• Minimum ordering quantities may apply

limited Axcess™ patch panels

From the outlet to the equipment room, SMP’s new keyed copper solution offers physically restrictive access to assist in network segregation. For the communications closet, the Limited Axcess™ system allows network administrators to easily control user connectivity to specific network segments. By using SMP’s 24 port snap-in patch panel and Limited Axcess™ RJ45 jacks, network permissions can be effortlessly managed.

Furthermore, Limited Axcess’™ patented technology provides enhanced system performance exceeding Category 6a requirements. This one-of-a-kind system is ideal for applications where restrictive network security is required or for end users looking for superior bandwidth performance.

• 24 port snap in panel

• Limited Axcess™ and color options on page CC-3

limited axcess™ secure Faceplates


LAFP01SS Limited Axcess™ Stainless Steel Secure Faceplate Kit, 1 port

LAFP02SS Limited Axcess™ Stainless Steel Secure Faceplate Kit, 2 port

limited axcess™ patch panels


A24 Limited Axcess™ Snap-In Patch Panel, 24 Port, 2 RU (Jacks not included)

copper closet cc-4

categorY 6a solution

category 6a solutionFor 10 GBASE-t Applications

AppliCAtioNS• 10GBASE-T Ethernet

• 1000BASE-T Gigabit Ethernet


• 10BASE-T Ethernet

• BroadbandVideo

• 155/622 Mbps ATM

• 100 Mbps TP-PMD

• 4/16 Mbps Token Ring

• Voice

With the number of new 10 Gigabit structured cabling solutions flooding the market, SMP has developed a system that sets the standard for this next generation of technology. SMP created components that are not only guaranteed to surpass the IEEE throughput standards but exceed the elevated frequency response requirements of TIA. This deliberate and methodical approach to component design has led SMP to create superior 10 Gigabit shielded and un-shielded systems. Within these system solutions, SMP has kept one thing constant and that is our commitment to quality. Whether choosing a UTP or FTP 6a solution, customers can be assured that they are getting a connection to count on.

SMP's 10 Gig solution reaches beyond the current Category 6 specifications and creates a system that offers enhanced performance and guaranteed 6a connectivity. As a system, the SMP UTP or FTP 6a solution offers superior alien cross-talk performance that exceeds ISO Class E, Augmented Cat 6 and IEEE 10 GBASE-T requirements for a full 100 meters.

• Guaranteed 10 GBASE-T link segment performance compliant

• 10 GBASE-T 100m Solution

• Backward compatibility (Cat 6, Cat 5e, and Cat 3 compliant)

• Fully inter-operable with other standards based components and systems

• Power over Ethernet (PoE) compliant

• Twice the bandwidth of Category 6 cabling

copper closet cc-5


Category 6a patch Cords

To complete the link, SMP created Category 6a station cords that guarantee 6a compliance and offer superior PSANEXTperformancesuitableformitigationofaliencross-talk. These station cords also improve the external noise immunity of structured communications cabling systems and EMI suppression through shielded cabling and plug design. Overall, SMP’s Cat 6a patch cords assist in creating a complete 10 Gigabit throughput system that is reliable for years to come.

• Guaranteed Augmented Category 6 compliant

• Backward compatible with Category 3, 5, 5e and 6

• SuperiorPSANEXTperformancesuitableformitigation of alien cross-talk in existing installs

• Superior PSAACR-F performance

• Superior EMI suppression

• Improves the external noise immunity of structured cabling systems

• LS0HorPVC cable construction

• PVCpatchcord is UL Listed

Category 6a outlet Jacks

SMP’s Augmented Category 6 jack offers a high performance interconnect hardware component in a compact form factor. This RJ45 Slim-line Category 6a jack provides a comprehensive solution for high

performance structured cabling systems. Using patented crosstalk reduction technology and multiple printed circuit boards, SMP engineering has developed its highest performing component product yet. In addition to the performance levels, the small sized form factor of the Slim-line design supports high density applications allowing for 24 ports in a 1U panel for shielded applications.


• Slim-line profile allows 24 ports in a 1U panel.

• IEEE - 10GBASE-T 802.3an clause 55.7 (compliant to link definition)

• TIA - TSB-155 (Channel compliant) & 568b.2-10 (Component compliant)

• ISO - TR-24750 (Channel compliant)

• Versatileformfactorallowsimplementationin most vendor faceplates.

• New high performance contacts provide low crosstalk with improved mechanical robustness.

• Single stuffer cap.

• Terma-grip technology for easy field installation.

• Minimized shielding aperture size for reduced EMI emissions.

• 2 PCB Mezzanine assemblies for low crosstalk performance in a small form factor.

• Improved strain relief system designed for Category 6a cable.

• UL listed communications circuit accessory.

• Large easy-to-read color code labels.

• Compliant with Power over Ethernet (PoE) requirements.

• Contact material - high strength beryllium copper alloy

• Contact plating - 50 µin gold over nickel

smp category 6a patch cords


PC6AS-B-xxyy* Category 6a patch cord with boot

* Replace “xx” with length in feet; replace “yy” with color choice -06=Data Gray (Standard)** UL Listed CCA File E137579Ex: PC6AS-B-0306 = Category 6a patch cord with boot, 3 feet,Gray (Standard)

smp category 6a outlet Jacks


U6Axx Category 6a UMJ outlet jack, UTP - Unshielded

K6Axx Category 6a KMJ outlet jack, UTP - Unshielded, Slim-line

K6A02S Category 6a KMJ outlet jack, FTP - Shielded, Slim-line

* Replace “xx” with color code – see color code chart in Workstation section – KMJ Jacks & Adapters

copper closet cc-6


Category 6a patch panels

SMP Data Communications’ Category 6a Patch Panels offer a high density solution for guaranteed 10GBASE-T Ethernet applications. Both SMP’s UTP and FTP Cat 6a patch panels present a product solution that exceeds proposed 10Gbit standards by TIA/EIA and promises superior performance compliance. As a 10 Gig compo-nent, the Category 6a patch panel is ideal for end users who are looking for superior network performance to keep their infrastructure lasting well into the future.


• Backward compatible to Category 3, 5, 5e, and 6

• Offers mounting flexibility and removable cable strain-relief bar that attaches directly to panel

• All steel construction ensures panel rigidity and reliable terminations

• Can be easily mounted to any 19” rack or cabinet

• High density configuration allows for 24 ports in a 1U rack space

• Write on window plates for port identification

• TIA-TSB 155 & 568B.2-10 component compliant

• ISO 24750 compliant

• IEEE 802.3an 10GBASE-T link segment (Clause 55.7) compliant – when installed with approved cable and patch cords

• CSA certified

• Insulation resistance – 500 MΩ minimum

• Dielectricwithstand–1000VACRMS,AC60Hz or1414VDCP-P

• DC current rating – 1.5 A per conductor at 20° C ambient de-rated to 0.75 A at 60° C ambient

smp category 6a patch panels


AAXG6A16-UTP Category 6a 10 Gig UTP Patch Panel, UMJ style, 1 RU, 16 port




AKXG6A16-UTP Category 6a 10 Gig UTP Patch Panel, KMJ style, 1 RU, 16 port

AKXG6A16-FTP Category 6a 10 Gig FTP Patch Panel, Shielded KMJ style, 1 RU, 16 port

AKXG6A24-FTP Category 6a 10 Gig FTP High Density Patch Panel, Shielded KMJ style, 1 RU, 24 Port

AKXG6A32-FTP Category 6a 10 Gig FTP Patch Panel, Shielded KMJ style, 2 RU, 32 Port

AKXG6A48-FTP Category 6a 10 Gig FTP Patch Panel, Shielded KMJ style, 2 RU, 48 Port

copper closet cc-7

patch panels

patch panelsCategory 6

When Category 6 was introduced to the market, SMP brought a product offering that was designed to exceed industry expectations and surpass the governing standards. SMP created Category 6 connectivity components that offered patented technology and guaranteed bandwidth performance. SMP’s Category 6 patch panels were no exception. Developed to offer true performance, SMP’s Category 6 patch panels are assured to meet the standard when verified.

• Category 6 component compliant

• 610 punch down block

• ETLVerifiedtoTIA/EIA568-B.2-1Cat6

• Power-Safe modular jack contacts

• SMP patented PCB technology

• Backward compatible, Cat 3, 5, & 5e

• Mounting flexibility

• Removable cable strain-relief bar attaches directly to Panel

• All steel panel (no plastic frames) ensures panel rigidity and reliable terminations

• IKON compatible - 12 colors

• Universal T568A/B wiring for easy installation

• 6 Port component modules

• Write-on label fields

• Rigid Box-Section panel construction

• Long term application confidence

• Compliant with power over Ethernet requirement

• All components made in the U.S.

applications• TIA/EIA 854 Gigabit

Ethernet over Cat 6 Cabling



• 10BASE-T Ethernet

• BroadbandVideo

• 270 Mbps digital video

• 155/622 Mbps ATM

• 100 Mbps TP-PMD

• 100VG-AnyLan

• 4 / 16 Mbps Token Ring

• Voice

axcess 6™ patch panels


PP12SIX Wall Mount Patch Panel, 568A/B wired, 12 port, 89D Bracket

PP1288/110A6 Wall Mount Patch Panel, 568A/B wired, 12 port

PP2488/110A6 Wall Mount Patch Panel, 568A/B wired, 24 port

DCC1288/110SIX Rack Mount Patch Panel, 568A/B wired, 12 port, 1 RU








DCC1688/110SIX-S Rack Mount Patch Panel, 16 Port, KMJ Shielded Jacks, 1 RU




ACC2488/110SIX Rack Mount Patch Panel, Angled, 568A/B wired, 24 port, 1 RU

ACC4888/110SIX Rack Mount Patch Panel, Angled, 568A/B wired, 48 port, 2 RU

copper closet cc-8

patch panels

Category 5e -110 Style

SMP’s Category 5e patch panels incorporate SMP’s best design and application performance specifications ever. The A5E™ product line provides unmatched performance in premise connectivity. Designed for the most demanding network applications, SMP created Category 5e patch panels that offer customers the highest level of headroom to any Category 5e link or channel.

• Comfortably exceeds EIA/TIA 568-B.2 Category 5e standards

• ISO/IEC11801 compliant

• Patented PC Board Technology

• Constructed of cold rolled steel for durability

• Rigid design provides solid frame for hi-impact punching tools

• Universal TIA 568A/B wiring configuration

• IDC’s withstand 200 wire insertions

• Write on label fields

• IKON compatible – 12 colors

• Cable strain relief bar provided

• All components made in U.S.

applications




• Broadbandvideo

• 270Mbpsdigitalvideo

• 155/622MbpsATM

• 100MbpsTP-PMD

• 100VGAnyLan

• 4/16MbpsTokenRing

• Voice

a5e™ patch panels


PP12A5E Wall Mount Patch Panel, 568A/B wired, 12 port, with 89D bracket

PP1288/110A5E Wall Mount Patch Panel, 568A/B wired, 12 port

PP2488/110A5E Wall Mount Patch Panel, 568A/B wired, 24 port

DCC1288/110A5E Rack Mount Patch Panel, 568A/B wired, 12 port, 1 RU








ACC2488/110A5E Rack Mount Patch Panel, Angled,568A/B wired, 24 port, 1 RU

ACC4888/110A5E Rack Mount Patch Panel, Angled,568A/B wired, 48 port, 2 RU

copper closet cc-9

patch panels

Category 5e - Shielded 110 Style

SMP’s shielded Category 5e patch panels provide superior performance with an extra sense of security. A removable cover protects against external noise and wireless technologies while also offering easy access for termination. Just like all A5E™ patch panels by SMP, performance is designed to exceed EIA/TIA 568-B.2 Category 5e standards.

• Comfortably exceeds EIA/TIA 568-B.2 Category 5e standards

• ISO/IEC11801 compliant

• Fully shielded RJ45 jacks


• Rigid design provides solid frame for hi-impact punching tools

• 110 Style punch down for easy terminations

• IDC’s withstand 200 wire insertions



• Removable cable strain-relief bar attaches directly to Panel

• Removable cover for protection from EMI and RFI emissions


Voice Grade telco

The same cross-connect solutions available for Ethernet applicationsarealsoavailableforPBXequipment.Fortheseapplications,SMPoffersVoiceGradeTelcoPatchPanels which break out to 24-RJ45 jacks. Customers can easily patch their phone system into the permanent link by simply using patch cords and open ended cable assemblies punched down to a 110 block, 66-block, or 110 patch panel.


• Constructed of extruded aircraft grade aluminum

• 25 Pair Telco connectors allow for quick connects and easy installations




applications


• 100BASE-TX Fast Ethernet


• Broadbandvideo


• 155/622MbpsATM

• 100MbpsTP-PMD

• 100VGAnyLan

• 4/16Mbps Token Ring

• Voice

a5e™ shielded patch panels


DCC1688/110S01 Rack Mount Patch Panel, Shielded 110-style, 568B wired, 8 port modules, 16 port, 1 RU

DCC1688/110S03 Rack Mount Patch Panel, Shielded 110-style, 568A wired, 8 port modules, 16 port, 1 RU

DCC2488/110SAB Rack Mount Patch Panel, Shielded, 110 style, 568A/B wired, 8 port modules, 24 Port, 1 RU

DCC2488/110S6-01 Rack Mount Patch Panel, Shielded 110-style, 568B wired, 6 port modules, 24 port, 1 RU

Voice grade telco patch panels


DCC2462/2502 Rack Mount Patch Panel, Telco Interface panel, 6x2, USOC, 24 Port



copper closet cc-10

patch panels

Gigabit Ethernet telco

High speed data connections are essential for keeping pace with today’s business climate. SMP took this into consideration when developing patch panels that offered 1000BASE-T Gigabit Ethernet performance. Not only does the performance exceed industry standards, SMP’s Gigabit Ethernet Patch Panels are 100% component tested in the factory guaranteeing the customer worry-free installations.

• ExceedsEIA/TIA568-B.2specifications

• ISO/IEC11801compliant

• PatentedPCBoardTechnology

• Allsteelconstructionfordurability

• Allplasticcomponentsarehighimpact self-extinguishing,rated94V-0

• EachfemaleTelcoconnectorissplitoutto6 RJ45 ports wired for 1000BASE-T applications

• Fastandeasyinstallations

• Writeonlabelfields

• IKONcompatible–12colors

• Fullyadjustablecablemanagementsupportbar and bend radius requirements

• AllcomponentsmadeinU.S.

applications




• Broadbandvideo

• 155/622MbpsATM

• 100MbpsTP-PMD

• 100VGAnyLAN


• Voice

gigabit ethernet patch panels


PP1288/25V03 Wall Mount Patch Panel, Gigabit Telco, 568A wired, 12 Port

PP1288/25V01 Wall Mount Patch Panel, Gigabit Telco, 568B wired, 12 Port

PP2488/25V03 Wall Mount Patch Panel, Gigabit Telco, 568A wired, 24 Port

PP2488/25V01 Wall Mount Patch Panel, Gigabit Telco, 568B wired, 24 Port

DCC24A/GBASET21 Rack Mount Patch Panel, Gigabit Telco, 568A wired, 24 Port with cover

DCC24B/GBASET21 Rack Mount Patch Panel, Gigabit Telco, 568B wired, 24 Port with cover

DCC48A/GBASET21 Rack Mount Patch Panel, Gigabit Telco, 568A wired, 48 Port with cover

DCC48B/GBASET21 Rack Mount Patch Panel, Gigabit Telco, 568B wired, 48 Port with cover

DCC2488/25S-01 Rack Mount Patch Panel, Shielded Gigabit Telco, 568B wired, 24 Port with cover

ACC2488/25V01 Rack Mount Patch Panel, Angled,Gigabit Telco, 568B wired, 24 port, 1 RU

ACC4888/25V01 Rack Mount Patch Panel, Angled,Gigabit Telco, 568B wired, 48 port, 2 RU

copper closet cc-11

patch panels

Fast Ethernet telco

SMP was one of the first developers of Category 5e compliant 100BASE-T Patch Panels that support advanced high-density Telco ports. Each female 25-pair Telco connector is split out to 12-RJ45 ports wired for 100BASE-T applications for fast and easy installations. Developed initially for use with Cisco switches, SMP’s Fast Ethernet Telco patch panels offer customers a single source solution that guarantees unrivaled 100BASE-T performance.




• Allsteelconstructionfordurability

• Allplasticcomponentsarehighimpact self-extinguishing,rated94V-0

• EachfemaleTelcoconnectorissplitoutto 12RJ45portswiredfor100BASE-TXapplications

• Fastandeasyinstallations



• Removablecablestrain-reliefbarattaches directly to Panel

• Alsoavailableinshieldedversion

• AllcomponentsmadeinU.S.

applications



• Broadbandvideo


• 155/622MbpsATM

• 100MbpsTP-PMD

• 100VGAnyLAN


• Voice

Fast ethernet patch panels


PP2484/25VEFS100 Wall Mount Patch Panel, Telco, 24 Port

DCC2484/25V100 Rack Mount Patch Panel, Telco, 24 Port, 2 RU




DCC4884/25S-100 Rack Mount Patch Panel, Shielded Telco, 48 Port, 2 RU

copper closet cc-12

patch panels

patch panel Accessories

SMP’s IKON kits color code patch panels for easy labeling and to meet EIA/TIA 606 port identification requirements. IKON kits may be used to dress up any A5E™ or Axcess 6™ patch panel. Snap-In Multi-media panels and all kits include enough IKONS to color every port with any 9 colors.

EIA/TIA color coding – SMP color code:

• KeyTelephoneSystemsRed–03

• NetworkCommunicationsGreen–04

• StationBlue–05

• SecondLevelBackboneGray–06

• FirstLevelBackboneWhite–07

• DemarcationPointOrange–08

• MiscellaneousYellow–09

• CommonEquipmentPurple–10

• Inter-buildingBackboneBrown–11

Snap in Multi – Media panels

The ability to be flexible and adaptable to each customer’s unique needs has been SMP’s speciality for years. With SMP’s Snap-In Multi-media patch panels, any combination of UMJ or KMJ style jacks and adapters can be chosen to configure a custom patch panel. All Multi-media patch panels are mountable in any 19” rack.

• PortswillaccommodateanyUMJor KMJ jack or adapter

• Constructedofextrudedaircraftgrade aluminum for durability



axcess™ snap-in multi-media patch panels


A16 Rack Mount Empty Patch Panel, UMJ style, 16 Port, 1 RU



A48H Rack Mount Empty Patch Panel, UMJ style, 48 Port, High Density 2 RU


ACC24U Rack Mount Empty Patch Panel, Angled, UMJ style, 24 port, 1 RU

ACC48U Rack Mount Empty Patch Panel, Angled, UMJ style, 48 port, 2 RU

AK16 Rack Mount Empty Patch Panel, KMJ style, 16 Port, 1 RU

AK24 Rack Mount Empty Patch Panel, KMJ style, 24 Port, 1 RU

AK48H Rack Mount Empty Patch Panel, KMJ style, 48 Port, High Density 2 RU

AK481U Rack Mount Empty Patch Panel, KMJ Style, 48 port, 1RU

AK16STP Rack Mount Empty Patch Panel, KMJ style, Shielded, 16 Port, 1 RU



ACC24K Rack Mount Empty Patch Panel, Angled, KMJ style, 24 port, 1 RU

ACC24KS Rack Mount Empty Patch Panel, Angled, KMJ style, Shielded, 24 port, 1 RU

ACC48K Rack Mount Empty Patch Panel, Angled, KMJ style, 48 port, 2 RU

ACC48KS Rack Mount Empty Patch Panel, Angled, KMJ style, Shielded, 48 port, 2 RU

iKon Kits


IKON1U IKON Kit for 10-24 Ports, 9 color assortment



IKON5U IKON Kit for up to 120 Ports, 9 color assortment

IKONxx IKON Kit, Pack of 100 6-port strips

* Replace “xx” with color code (See chart on left)

copper closet cc-13

Zone distriBution solutions

Zone distribution solutions Zone Cross Connect

SMP’s zone distribution solutions optimize any horizontal cabling infrastructure. Through innovative designs, SMP continues to provide zone cross connect solutions that meet every need. Whether using SMP’s 6-Port Interconnect Module or the new “Spider” Zone Module, the convenience and reliability of SMP technology guarantees performance for high speed applications.

25-pair Zone distribution cable assemblies


25Zd/ - 25-pair Zone distribution cable assembly

cable type & category Wiring type end type length in Feet

5eCat 5e Riser

6a568A wired

trTelco Right

epCat 5e Plenum

6B568B wired

tlTelco Left

tsTelco Straight

xBlunt End – No Connector

hrHydra Right

hlHydra Left

hsxx*Hydra Straight

*Replace “xx” with length of legs (12 or 24)

Zone interconnect modules (Field terminable)


ZDIMA5E Zone Interconnect Module, Category 5e, 568A/B wired, 6 port (pictured above)

ZDIMSIX6A/B Zone Interconnect Module, Category 6, 568A/B wired, 6 port (not pictured, mounts to an 89D bracket)

Ex: 25ZD/5E6BTS-100 = 25 Pair Cable Assembly, Zone Distribution module to Telco Straight, Cat 5e Riser, 568B wired, 100 Feet

applications




• BroadbandVideo

• 155/622MbpsATM

• 100MbpsTP-PMD


• Voice

SMP’s Interconnect Module offers the ease and compact design to give customers an alternative to multiple outlets in an office environment. The 6 port module allows for termination between 25-Pair cables to modular RJ45 ports at the workstation, minimizing the need for multiple horizontal cable runs.

• Universal568A/Bwiring

• Compactdesignallowsforeasyinstallation

• Idealinmultiplesituations,i.e.underfloor, power pole, and multi-port workstations

• Maybefactoryassembledwithcableor field terminated.

• AllcomponentsmadeintheU.S.

copper closet cc-14


Zone Distribution Box

Perfect for serving multiple remote outlets, SMP’s Zone Distribution Box provides an easy connection between a 25-pair cable and six modular ports. Each box is constructed with one female Telco connector and 6-RJ45 jacks, 3 on each side. With its compact design, the Zone Distribution Box can easily be used as a wall mountable mini patch panel for increased cost effectiveness.

• Availablein568Aor568Bwiredapplications

• PatentedPCBoardtechnology

• Idealformultiplesituations,i.e.underfloor, ceiling, and multi-port workstations

• Mountsanywhere


Zone Distribution Jack packs

Created for completely modular connections, the SMP Jack Pack is ideal for any zone distribution application and can easily be mounted anywhere. With performance that exceeds all standards requirements, the Jack Pack offers a multitude of application solutions. Whether mounting to cable tray for a quick cross connect point or using as a distribution site within an equipment room, the SMP Jack Pack offers guaranteed performance in a compact package.

• Availablefor10/100orGigabitEthernet applications

• ExceedsEIA/TIA568Aspecifications


• Compactdesign

• Mountsanywhere

• Alsoavailableinshielded


applications




• BroadbandVideo

• 155/622MbpsATM

• 100MbpsTP-PMD


• Voice

Zone distribution Box


ZDB6VA01 Zone Distribution Box, 568A wired, 6 Port

ZDB6VB01 Zone Distribution Box, 568B wired, 6 Port

Zone distribution Jack packs


ZDIM81225TX Zone Distribution Jack Pack, 10/100 RJ45 to Female Telco, 568B wired, 12 Port

ZDIM8625A Zone Distribution Jack Pack, Gigabit RJ45 to Female Telco, 568A wired, 6 port

ZDIM8625B Zone Distribution Jack Pack, Gigabit RJ45 to Female Telco, 568B wired, 6 Port

ZDIM8625BS Zone Distribution Jack Pack, Gigabit Shielded RJ45 to Female Telco, 568B wired, 6 Port

copper closet cc-15


Zone “Spider” Distribution Solutions (for cable tray)

SMP’s new Zone “Spider” Distribution Solutions for cable tray mounting provide a convenient means to access copper network cross connect points. The copper modules are manufactured with Telco PCB assemblies factory installed for fast and easy installations. Simply insert the Telco cable assembly and patch cords and the job is finished. These modules allow customers to take the distribution point out of the equipment room to where it’s needed, while giving installers less installation time and a reduction in cabling costs.

• Availablefor10/100orGigabit Ethernet applications




• Expandabledesignwillfittraywidths from 12" to 18"

• Easyinstallationsandadditionswithoutdisturbingpreviously installed cable

• Reducesthenumberofcablesandcongestion in a cable tray


applications

• 1000BASE-TGigabitEthernet (only on Gigabit Ethernet module)



• BroadbandVideo

• 155/622MbpsATM

• 100MbpsTP-PMD


• Voice

Zone “spider” distribution solution (for cable tray)


ZDMB12/25V100 Zone Distribution Module, 10/100 Telco, 12 Port

ZDMB12A/GBASET21 Zone Distribution Module, Gigabit Telco, 568A wired, 12 Port

ZDMB12B/GBASET21 Zone Distribution Module, Gigabit Telco, 568B wired, 12 Port

copper closet cc-16

caBle assemBlies

cable assembliesAs the industry demands systems with faster installation times and less network interruption, SMP developed a modular solution to meet those specific communications cabling needs. Using 25-pair Telco cable assemblies coupled with SMP Telco patch panels, SMP created a solution that is as simple as Plug-and-Play. SMP’s 25-pair

Telco cable assemblies make moves/adds/changes more flexible, air passages less restricted and data throughput rates uninterrupted.

Each 25-pair assembly is designed to support new interface technology of leading switch manufacturers. Constructed to exceed

EIA/TIA Category 5e specifications, SMP’s Telco assemblies offer guaranteed Gigabit throughput with 100% component testing to their specified protocols. From rack mount to zone distribution, SMP’s PowerSum-Rated 5e assemblies offer a wide variety of options to meet 10/100 and Gigabit Ethernet solutions.

• ExceedsEIA/TIACategory5especifications

• UtilizesULcertifiedCat5e25-paircable

• 100%componenttestingforguaranteedGigabitEthernet performance

• AllTelcotoTelcoassembliesaremale-to-male

• AllHydraassembliesaremanufacturedwith precise leg measurements to span 19” racks or a stand alone switch

• Workswithhigh-density48portblades

• 50-pinTelcoconnectorsavailablein120°or 180° angles

• Availablewithright,left,orstraightconnectors– plenum or non-plenum

• Shielded25-paircableassembliesalsoavailable

applications




• BroadbandVideo

• 155MbpsATM

• 100MbpsTP-PMD

• 100VGAnyLAN


• Voice

telco to telco Cable Assemblies

25-pair telco to telco cable assemblies


25PA/ - - - 25-Pair Telco to Telco Cable Assembly

end type end type cable type &

category length in Feet

TR Telco Right

TR Telco Right

5E Cat 5e Riser

TLTelco Left

TLTelco Left

EP Cat 5e Plenum

TS Telco Straight

TSTelco Straight

X Blunt End –

No Connector

Ex: 25PA/TR-TR-5E-100 = 25 Pair Cable Assembly with Telco Right to Telco Right, Cat 5e Riser, 100 Feet

copper closet cc-17

caBle assemBlies

Hydra Cable Assemblies:

Ex: 25PA/TRHS1265E-025 = 25 Pair Cable Assembly with Telco Right to Gigabit Hydra Straight, 6 Legs at 12", Cat 5e Riser, 25 Feet* Must use B-wired Telco panel with 6 Leg Gigabit Hydra Assemblies

Ex: 25PA/TRHS24-5E-050 = 25 Pair Cable Assembly with Telco Right to 10/100 Hydra Straight, 12 Legs at 24", Cat 5e Riser, 50 Feet

25-pair telco to gigabit hydra cable assemblies (6 legs)


25PA/ 6 - 25-Pair Telco to Hydra Cable Assembly

end type end type cable type & category

length in Feet

tr Telco Right

hr Hydra Right

5e Cat 5e Riser

tlTelco Left

hlHydra Left

ep Cat 5e Plenum

ts Telco Straight

hsxx*Hydra Straight

x Blunt End -

No Connector

*Replace “xx” with length of legs

(12 or 24)

25-pair telco to 10/100 hydra cable assemblies (12 legs)


25PA/ - - 25-Pair Telco to Hydra Cable Assembly

end type end type cable type & category

length in Feet

tr Telco Right

hr Hydra Right

5e Cat 5e Riser

tlTelco Left

hlHydra Left

ep Cat 5e Plenum

ts Telco Straight

hsxx*Hydra Straight

x Blunt End -

No Connector

*Replace “xx” with length of legs

(12 or 24)

copper closet cc-18

categorY 6 patch cords

Category 5e patch Cords

SMP’s Category 5e patch cords are manufactured to strict standards, ensuring adherence to TIA/EIA 568-B.2 component performance requirements. After all, SMP’s test methods for patch cord component testing methods have helped form the basis for the Category 5e standards. This commitment to guaranteed performance is what makes SMP’s A5E patch cords an excellent addition to any SMP Category 5e structured cabling system

• 100%componentperformancetested

• ExceedsTIA/EIA568-B.2Category5erequirements

• Customizablelengthsandcolorsavailable

Category 6 patch Cords

SMP’s Category 6 patch and workstation cords are the perfect compliment to any SMP Axcess 6™ copper system. SMP’s Axcess 6 cords offer Onyx Grip, a strain relief solution that ensures mechanical and electrical stability during and after adds, moves or changes. In addition, Axcess 6 patch cords utilize straight-thru pair orientation and are 100% component performance tested. SMP’s test methods have formed the basis for standard patch cord component testing methods in TIA/EIA 568-B.2 -1 Category 6 standards ensuring that the Axcess 6 patch cord will guarantee performance.

• 100%componentperformancetested

• ExceedsTIA/EIA568B.2-1specifications

• Customizablelengthsandcolorsavailable

• Shieldedversionavailable

applications




• BroadbandVideo

• 155/622MbpsATM

• 100MbpsTP-PMD


• Voice

• Allapplicationsdevelopedforoperation over Category 6 or class E cabling

applications




• BroadbandVideo

• 155/622MbpsATM

• 100MbpsTP-PMD


• Voice

• Allapplicationsdeveloped for operation over Category 5e or class D cabling

axcess 6™ patch cords


PCSIXxxyy Category 6 patch cord without boot

PCSIXxxByy Category 6 patch cord with boot

PCSIXSxxByy Category 6 shielded patch cord with boot

*Replace xx with length in feet; replace yy with color code – (06) gray, (09) yellow** Ex: = PCSIX03B09 – Category 6 patch cord, 3 feet, with boot, yellow

a5e™ patch cords


PC5EBxxyy Category 5e patch cord without boot

PC5EBxxByy Category 5e patch cord with boot

*Replace xx with length in feet; replace yy with color code – (06) gray, (09) yellow** Ex: = PC5EB03B09 – Category 5e patch cord, 3 feet, with boot, yellow

copper closet cc-19

110 Wiring products

110 Wiring products

Whether installing a Category 5e or Category 6 system, SMP offers a complete solution with 110 Block connectivity. SMP’s 110 product line offers easy network cabling consolidation and quick transitions with maximum performance. From wall mount to rack mount 110 blocks and cable organizers, SMP’s selection of products offer customers a solid backbone for an exceptional structured wiring solution.

• ExceedsindustrystandardsforCategory5e and Category 6 specifications, respectively

• 110Blocksmaybefieldterminatedwith 22-26 AWG solid wire

• Colorcodedpairsforeasyidentification

• Designationlabelsincluded

• Orderwithlegswhenbackcaserouting

• Orderwithoutlegswhendepthislimitedor when frame mounting

• 110Blockmaybekittedforeasyinstallations

applications




• BroadbandVideo

• 155/622/1000MbpsATM

• 100MbpsTP-PMD

• 100VGAnyLAN


• Voice

copper closet cc-20

110 Wiring products

Category 5e 110 Wiring products Category 6 110 Wiring products

Cable organizers

category 5e 110 Wiring products


C410 Category 5e 110 C-4 Connector Blocks

C510 Category 5e 110 C-5 Connector Blocks

DCC50/110EFS* Category 5e Wall Mount 110 Block, 50 Pair, Without Legs

DCC50/110EFSL* Category 5e Wall Mount 110 Block, 50 Pair, With Legs





DCC300/110EFSTWB Category 5e Wall Mount 110 Tower, 300 Pair, Mounting Frame

DCC300/110EFSTEXP Category 5e Wall Mount 110 Tower, 300 Pair, Extension Mounting Frame

DCC100/110EFSRK Category 5e Rack Mount 110 Block, Kitted 100 Pair



*Place a “K” at the end of the part number for a complete kit. Ex: DCC48/110EFSLK = Category 5e Wall Mount 110 Block with Legs and Connectors

category 6 110 Wiring products


C64-10 Category 6 110 C-4 Connector Blocks

DCC48/110SIX* Category 6 Wall Mount 110 Block, 48 Pair, Without Legs

DCC48/110SIXL* Category 6 Wall Mount 110 Block, 48 Pair, With Legs





DCC288/110SIXTWB Category 6 Wall Mount 110 Tower, 288 Pair, Mounting Frame

DCC288/110SIXTEXP Category 6 Wall Mount 110 Tower, 288 Pair, Extension Mounting Frame

DCC96/110SIXRK Category 6 Rack Mount 110 Block, Kitted 96 Pair



*Place a “K” at the end of the part number for a complete kit. Ex: DCC48/110SIXLK = Category 6 Wall Mount 110 Block with Legs and Connectors

110 Block cable organizers


COH110 Wall Mount Horizontal Cable Organizer without Legs

COH110L Wall Mount Horizontal Cable Organizer with Legs

DCC300/110EFSTHVCM Wall Mount Vertical Cable Organizer, For 110 Tower

DCC300/110EFSTVCM Wall Mount Vertical Cable Organizer Extension, For 110 Tower

COH110R Rack Mount Horizontal Cable Organizer, 19" Width

copper closet cc-21

W o r K s t a t i o n

W o r K s tat i o n

To offer a comprehensive network infrastructure, SMP

created a complete line of connectivity components to take

guaranteed SMP performance from the equipment room to

the desktop. As with all SMP products, performance is always

the priority. Every SMP jack, whether our proprietary Bezel

design or the standard Keystone version, are 100% tested to

stringent performance standards and all are completely

backward compatible to lower category performance levels.

This attention to detail makes SMP’s jacks and outlet solutions

a clear answer to constructing the perfect structured cabling

system, from telecom room to the desk.

SMP’s workstation product line features a broad range of

quality modular products to meet any structured cabling

application. In addition to delivering unsurpassed performance

and patented SMP technology, SMP’s workstation solutions

provide customers a durable aesthetic appeal to fit any

desktop scenario. And in order to fit any setting, our

workstation products offer the widest ranges of jacks,

adapters, faceplates, surface-mount boxes, and station cords

in a variety of colors and styles. Whether using SMP’s unique

Universal Modular (Bezel) components or the industry standard

Keystone Modular design, SMP has the workstation solution

that will give customers exceptional performance and flexibility

to meet any desktop configuration.

contents:Ws-2 UMJ Jacks and

Adapters

Ws-6 UMJ Faceplates

Ws-10 KMJ Jacks and Adapters

Ws-14 KMJ Faceplates

Ws-17 Wall plates and Connectors

Ws-18 Surface Mount Boxes

Ws-19 Multi-media Boxes

umJ JacKs and adapters

umJ Jacks and adaptersSMP’s Universal Modular Jack offers a unique locking bezel system that allows for easy port identification and labeling at the work center. This jack and bezel combination create a superior hold on the faceplate or box, making it virtually impossible to accidentally remove the jack. More than the aesthetic appeal and convenience the UMJ jack offers, it is designed to support emerging high performance platforms that exceed category specifications.

Category 6a outlet Jacks(See Copper Closet, page CC-6)

Category 6 Jacks

SMP’s Axcess 6™ jacks are world-class performers with patented printed circuit board technology to provide true Category 6 component performance on all pair combinations. With a standard 110 style punch down termination, SMP’s Category 6 UMJ style jacks are manufactured to comply with TIA component performancerequirementsandareETLVerifiedtoTIA/EIA 568-B.2-1 Cat 6 standards. Each UMJ Cat 6 jack utilizes universal T568A/B wiring and is backward compatible with Category 3, 5, and 5e.

• MeetsIEC60603-7requirements

• 110styleIDCcontactsmeet TIA/EIA 568-B.2 requirements


• Backwardcompatible,Cat3,5,and5ecompliant

• Full6-position,modularplugcompatiblewithbezel

• UniversalT568A/Bwiringforeasyinstallation

• TERMAGripconductor&jacketretentionfor easy wiring

• Availablewith20labelingandcoloroptions

• Securemountinglocksjackintofaceplate

• FitsallSMPAxcess™faceplatesandsurface mount boxes

applications

• TIA/EIA854Gigabit Ethernet over Cat 6 Cabling




• BroadbandVideo


• 155/622MbpsATM

• 100MbpsTP-PMD

• 100VG-AnyLan


• Voice

axcess 6™ umJ Jacks


UMJA6 Axcess 6™ UMJ Category 6 Jack, Universal 568A/B wiring, no bezel

UMJA6xx Axcess 6™ UMJ Category 6 Jack, Universal 568A/B wiring, colored bezel

UMJA650xx Axcess 6™ UMJ Category 6 Jack, Universal 568A/B wiring, 50 pack

* Replace “xx” with color code – see color code chart on page WS-5

WorKstation Ws-2


Category 5e Jacks

SMP’s Axcess™ Category 5e Bezel jacks utilize SMP’s patented PC Board technology to exceed the ANSI/TIA/EIA 568-B.2 category 5e requirements with headroom to spare. For a more cost effective solution, SMP also offers a Leadframe Bezel jack that utilizes SMP’s

patented Leadframe technology. 110 style punch downs accommo-date 22 AWG solid through 26 AWG solid and 24 AWG stranded conductors and each SMP jack offers universal T568A/B wiring and performance enhancements to exceed industry standards.


• Backwardcompatible,Cat3,andCat5compliant

• Full6-position,modularplugcompatiblewithbezel


• TERMAGripconductor&jacketretention for easy wiring




Category 3 Voice Grade Jacks

SMP’s Category 3 Jacks offer customers SMP’s patented Leadframe technology for a cost effective solution to voice grade systems. 110 style IDC connectors on back for 26, 24, and 22 AWG solid conductors, make SMP’s Category 3 jacks easy to install and offer unmatched

performance. Add the locking color/icon bezel to provide distinctive jack identification.

• 110styleIDCcontacts

• TERMAGripconductor&jacketretention for easy wiring




applications




• BroadbandVideo

• 155/622MbpsATM

• 100MbpsTP-PMD


• Voice

a5e™ umJ Jacks


UMJA5E A5E™ UMJ Category 5e Jack, Universal 568A/B wiring, no bezel

UMJA5Exx A5E™ UMJ Category 5e Jack, Universal 568A/B wiring, colored bezel

UMJA5E50xx A5E™ UMJ Category 5e Jack, Universal 568A/B wiring, 50 pack

UMJVL8A/B A5E™ UMJ Category 5e Leadframe Jack, Universal 568A/B wiring, no bezel

UMJVL8A/Bxx A5E™ UMJ Category 5e Leadframe Jack, Universal 568A/B wiring, colored bezel

UMJVL8A/B50xx A5E™ UMJ Category 5e Leadframe Jack, Universal 568A/B wiring, 50 pack


axcess™ umJ category 3 Jacks


UMJL06U Axcess™ Jack USOC 6x6 Leadframe, 110 style, no bezel

UMJL06Uxx Axcess™ Jack USOC 6x6 Leadframe, 110 style, colored bezel

UMJL08U Axcess™ Jack USOC 8x8 Leadframe, 110 style, no bezel

UMJL08Uxx Axcess™ Jack USOC 8x8 Leadframe, 110 style, colored bezel

UMJL08A/B Axcess™ Jack 568A/B, 8x8 Leadframe, 110 style, no bezel

UMJL08A/Bxx Axcess™ Jack 568A/B, 8x8 Leadframe, 110 style, colored bezel


WorKstation Ws-3


UMJ Adapters

For multi-media options, SMP created a complete line of data, video, and audio ports for fiber, copper, coaxial and speaker cables. Combined with the multi-color, low-profile recessed Bezels, SMP’s UMJ style adapters are a flexible alternative for port identification, no matter what the application.

• Availablewith12coloroptions

• Securemountinglocksadaptersintofaceplate


APBLK01

AASTM01

AASCM01

AARCA01

AABNC01

AAF01

axcess™ umJ adapters


AASCMxx Axcess™ UMJ snap-in SC Multi-mode adapter

AASCSxx Axcess™ UMJ snap-in SC Single-mode adapter

AASTMxx Axcess™ UMJ snap-in ST Multi-mode adapter

AASTSxx Axcess™ UMJ snap-in ST Single-mode adapter

AADLCMxx Axcess™ UMJ snap-in Dual LC Multi-mode adapter

AAFxx Axcess™ UMJ snap-in F coupler

AABNCxx Axcess™ UMJ snap-in BNC coupler

AASVHSxx Axcess™ UMJ snap-in Super VHS coupler

AARCAxx Axcess™ UMJ snap-in RCA adapter with solder tab

APBLKxx Axcess™ UMJ snap-in Blank Bezel (20 pack)


WorKstation Ws-4


Bezels

Whether ordering kitted or separate for field installations, SMP’s unique bezel system offers an easy and affordable alternative for desktop port identification. Bezels may be ordered blank or labeled and with a multitude of colors to choose from. The flexibility and variety of combinations for workstation labeling are endless.

• 12differentcolorand4labelingoptions

• Standardpackageofbezelis20perbag

• Canbeeasilycustomizedorkittedwithjacks/adapters for special orders

• Availablefor6or8positionplugs

• Locksthejackoradapterintothefaceplate

• Shutteredbezelsavailablefordustprotection

axcess™ umJ Bezels

B E - - Optional Optional

position color text options

06 = 6 Position * See color chart below

V = Voice K = Keyed

08 = 8 Position D = Data S = Shuttered

F = Fax Blank = None

M = Modem

Blank = None

axcess™ umJ color code chart


00 Electrical Ivory 07 White

01 Office White 08 Orange

02 Black 09 Yellow

03 Red 10 Purple

04 Green 11 Brown

05 Blue 12 Bright White

06 Data Gray

WorKstation Ws-5

umJ Faceplates

umJ FaceplatesSMP’s Workstation solution isn’t complete without our Axcess™ faceplates. Available in a multitude of configurations and designed to meet any application, the Axcess™ faceplates for UMJ style jacks and adapters offer a convenient and aesthetically appealing solution for any desktop purpose.

Commercial Faceplates

• CommercialgradefaceplatesacceptanyUMJBezeljack or adapter

• IDwindowsincludewrite-onlabelsandplasticprotective covers

• Slottedmountingholessimplifyinstallation

• Availableinmostpopularcolors

• CommercialgradefaceplatesacceptanyUMJ Bezel jack or adapter

• VerticalIDwindowsprovideeasieridentificationchanges and removal of plate for jack access

• IDwindowsincludewrite-onlabelsandplasticprotective cover


• Angledfaceplatesreducestrainonexisting station cables

• IDwindowsincludewrite-onlabelsand plastic protective cover


axcess™ umJ commercial Faceplates


FPSR01xx Single gang commercial faceplate, recessed UMJ, 1 port





DP01xx Double gang commercial faceplate, UMJ, 1 port





* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White

axcess™ umJ Vertical Window commercial Faceplates


FPRSV03xx Single gang commercial faceplate, vertical window UMJ, 3 port


axcess™ umJ commercial angled Faceplates


FP04Axx Single gang commercial faceplate, angled UMJ, 4 port

DP08Axx Double gang commercial faceplate, angled UMJ, 8 port


WorKstation Ws-6

umJ Faceplates

Residential Faceplates

• SmoothsurfacefaceplatesacceptanyUMJBezeljack or adapter

• Bezelopeningsarerecessedforneaterappearance


Stainless Steel Faceplates

• StainlessSteelfaceplatesacceptany UMJ Bezel jack or adapter

• Corrosionresistant

• Maybeorderedwithtamperproofscrews

axcess™ umJ residential Faceplates


FPR01xx Single gang smooth faceplate, UMJ, 1 port





SDP01xx Double gang smooth faceplate, UMJ, 1 port






axcess™ umJ stainless steel Faceplates


FP01SS Single gang stainless steel faceplate, UMJ, 1 port





DP01SS Double gang stainless steel faceplate, UMJ, 1 port





WorKstation Ws-7

umJ Faceplates

office Furniture Faceplates

• Fitsmostpopularofficefurnitureincluding Herman Miller and Steelcase

• Availableingrayorblack

• Attractiveandfunctional

Front Axcess™ Faceplates

• CustomconfigurabletoaccommodateUMJandKMJ style jacks and adapters

• Accommodatesthreeindividualmodulesforultimate flexibility

• Additionalcablestoragedepth

• Slimdesign

axcess™ umJ office Furniture Faceplates

catalog number description cut out dimensions

office Furniture compatible

herman miller steel case haworth hon other

FAP3xx Furniture faceplate, 3 port 2.65”W x 1.35”H X X X

FAP302-HM Furniture faceplate, 3 port 2.98”W x 1.88”H X

FAP4xx Furniture faceplate, 4 port 5.25”W x 1.37”H X X

* Replace “xx” with color choice: 02 = Black or 06 = Data Gray

Front axcess™ umJ & KmJ Front axcess Faceplates


FP-FAOR-xx Front Axcess™ faceplate, single gang ring

FAOC-1A-xx Front Axcess™ UMJ faceplate, 1 port insert

FAOC-2A-xx Front Axcess™ UMJ faceplate, 2 port insert

FAOC-B-xx Front Axcess™ faceplate, blank insert

FAOC-VGA1-xx Front Axcess™ faceplate, 1 VGA insert

FAOC-1K-xxS Front Axcess™ KMJ faceplate, 1 port insert

FAOC-2K-xxS Front Axcess™ KMJ faceplate, 2 port insert

FP-FAU222-xx Front Axcess™ faceplate kit, (3) 2 port UMJ inserts

FP-FAU221-xx Front Axcess™ faceplate kit, (2) 2 port UMJ inserts, (1) 1 port UMJ insert

FP-FAU220-xx Front Axcess™ faceplate kit, (2) 2 port UMJ inserts, (1) blank insert

FP-FAU211-xx Front Axcess™ faceplate kit, (1) 2 port UMJ insert, (2) 1 port UMJ inserts

FP-FAU210-xx Front Axcess™ faceplate kit, (1) 2 port UMJ insert, (1) 1 port UMJ insert, (1) blank insert

FP-FAU200-xx Front Axcess™ faceplate kit, (1) 2 port UMJ insert, (2) blank inserts

FP-FAU111-xx Front Axcess™ faceplate kit, (3) 1 port inserts

FP-FAU110-xx Front Axcess™ faceplate kit, (2) 1 port inserts, (1) blank insert

FP-FAU100-xx Front Axcess™ faceplate kit, (1) 1 port insert, (2) blank inserts


WorKstation Ws-8

umJ Faceplates

Divax Faceplates

• Designedtoblendinwithanyhomeorofficedécor

• CompletelycompatiblewithDIVAXsingle-gangrectangular electrical plates

• Mountsinanystandardelectricalbox

• CanbeusedwithallDIVAXtypeswitches

• Smooth,cleansurface

• Ultimateflexibility

office Furniture Faceplates

• Fitsinsideanystandardelectricalfaceplate

• AccommodatestwoUMJports

axcess™ umJ divax style Faceplates


FDRxx Divax faceplate, UMJ, single gang ring

FDBxx Divax faceplate, UMJ, blank insert

FDUxx Divax faceplate, UMJ, 1 port Axcess™ insert

FD2Uxx Divax faceplate, UMJ, 2 port Axcess™ insert

FD3Uxx Divax faceplate, UMJ, 3 port Axcess™ insert

FDFxx Divax faceplate, UMJ, 1 port Co-ax insert

FD2Fxx Divax faceplate, UMJ, 2 port Co-ax insert

* Replace “xx” with color choice: 00 = Electrical Ivory, 01=White, 07 = White or 12=Bright White

axcess™ umJ receptacle insert


A106xx UMJ Receptacle Insert, 2 port

* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, or 07 = White

WorKstation Ws-9

KmJ JacKs and adapters

As an alternative to SMP’s unique UMJ jacks and adapters, SMP has created a Keystone product line to meet the demands of industry standard installa-tions. SMP’s Keystone jacks may have been designed to keep pace with standard installations, but in keeping with the SMP guarantee of excellence, every KMJ jack was created with SMP’s superior perfor-mance in mind. Each Keystone Modular Jack is component compliant to Category 3, Category 5e, and Category 6 standards and exceeds their respective category specifications. All KMJ jacks offer universal T568A/B wiring and 110 style punch downs for easy installations, making SMP’s KMJ product line a guaranteed connection.

KmJ Jacks and adapters

Category 6 Jacks

SMP’s KMJ jacks offer the same great printed circuit board technol-ogy that the UMJ jacks do to provide best-in-class Category 6 component performance. With standard 110 style terminations, SMP’s Category 6 KMJ jacks are ETL verified to TIA/EIA 568-B.2-1 Category 6 specifications and are

backward compatible to Category 3.


• Category6componentcompliant

• Mountingflexibility

• Large,easytoreadcolorcodelabels


• Longtermapplicationconfidence

• CompliantwithpoweroverEthernetrequirements

• Backwardcompatible,Cat3,5,&5ecompliant

• TERMAGripconductorandjacketretentionfor easy wiring

• FitsallSMPKeystonefaceplatesandsurface mount boxes

Category 6a outlet Jacks(See in Copper Closet section 2-6)

applications

• TIA/EIA854GigabitEthernet over Cat 6 Cabling




• BroadbandVideo

• 270Mbps digital video

• 155/622MbpsATM

• 100MbpsTP-PMD

• 100VG-AnyLan


• Voice

KmJ category 6 Jacks


KMJA6xx KMJ Category 6 jack, Universal 568A/B wiring

KMJA650xx KMJ Category 6 jack, Universal 568A/B wiring, 50 pack

KMJA602S KMJ Category 6 shielded jack, slimline, Universal 568A/B wiring


WorKstation Ws-10


Category 5e Jacks

The SMP Category 5e Keystone Modular Jack is a great alternative for high-density applications. Featuring a

lower profile and a snap-in design, the KMJ Category 5e jacks by SMP offer exceptional performance that exceeds industry standards. Offering Universal T568A/B wiring and component compliance to Cat 5e specifications, these Keystone jacks may be

ordered with SMP’s patented PC board technology or in a leadframe configuration for cost effective solutions.


• Backwardcompatible,Cat3,andCat5compliant



• Availablein12coloroptions


applications




• BroadbandVideo


• 155/622MbpsATM

• 100MbpsTP-PMD


• Voice

KmJ category 5e Jacks


KMJA5Exx KMJ Category 5e Jack, Universal 568A/B wiring

KMJA5E50xx KMJ Category 5e Jack, Universal 568A/B wiring, 50 pack

KMJVL8A/Bxx KMJ Category 5e Leadframe Jack, Universal 568A/B wiring

KMJVL8A/B50xx KMJ Category 5e Leadframe Jack, Universal 568A/B wiring, 50 pack

KMJVL8A/B02S KMJ Category 5e Leadframe Shielded Jack, Universal 568A/B wiring

* Replace “xx” with color code – see color code chart below

KmJ color code chart


00 Electrical Ivory 07 White

01 Office White 08 Orange

02 Black 09 Yellow

03 Red 10 Purple

04 Green 11 Brown

05 Blue 12 Bright White

06 Data Gray

WorKstation Ws-11


KMJ Feed-through Cat 5e Jack

SMP’s Category 5e Feed-through Jack offers exceptional connectivity and workstation versatility.

Category 3 Voice Grade Jacks

For voice grade applications, SMP offers a Keystone Modular Jack that exceeds performance specifications to any Category 3 requirement. SMP’s KMJ Category 3 jacks offer easy installations

with 110 style terminations on back for 26, 24, and 22 AWG solid conductors and delivers unsurpassed performance, keeping with SMP’s guarantee for consistent performance.

• 110styleIDCcontacts


• Availablein12coloroptions


KmJ category 5e Feed-through Jacks


KMJ5EFT02 KMJ Category 5e Jack, Feed-through, Black

KmJ category 3 Jacks


KMJL8A/Bxx KMJ Jack 568A/B, 8x8 Leadframe, 110 style

KMJL06Uxx KMJ Jack USOC, 6x6 Leadframe, 110 style


WorKstation Ws-12


KMJ Adapters

SMP’s Keystone adapters complete the product line by offering a full array of data, video, and audio ports for fiber, copper, coaxial and speaker cables. Featuring snap-in accessibility and a wide arrange of multi-media options, the SMP KMJ adapter line gives customers a flexible solution to meet any connectivity demand.


AKSVHS12

AKF12

AKRCA110B12

AKSCM01

AKRCAP12

AKBLK12

AKRCA110Y12

AKBP212

AKDLCM00

AKSTM12

KmJ adapters


AKSCMxx KMJ snap-in SC Multi-mode adapter

AKSTMxx KMJ snap-in ST Multi-mode adapter

AKDLCMxx KMJ snap-in Dual LC Multi-mode adapter

AKBNCxx KMJ snap-in BNC coupler

AKFxx KMJ snap-in F coupler

AKSVHSxx KMJ snap-in Super VHS adapter

AKRCAPxx KMJ snap-in Gold-plated RCA Bulkhead adapter

AKRCA110yxx KMJ snap-in RCA to 110 adapter

AKBP2xx KMJ snap-in Gold-plated Binding Posts (pair)

AKBC2xx KMJ snap-in Gold-plated Banana adapters (pair)

AKBLKxx KMJ snap-in Blank adapters

* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White* Replace “y” with color inset choice: R = Red, Y = Yellow, B = Black, or W = White

WorKstation Ws-13

KmJ Faceplates

KmJ FaceplatesSMP’s Keystone line of faceplates offers customers a versatile and flexible approach to any workstation demand. Available to meet a variety of configurations, SMP’s KMJ faceplates offer convenience in a visually appealing solution for any desktop purpose.

• Keystonecommercialgradefaceplates accept any KMJ style jack or adapter

• IDwindowsincludewrite-on labels and plastic protective covers

• Slottedmountingholes simplify installation


• Angledfaceplatereducesstrainonexisting station cables

Commercial Faceplates

KmJ commercial Faceplates


FPSK01xx Single gang commercial faceplate, KMJ, 1 port





DPSK06xx Double gang commercial faceplate, KMJ, 6 port

DPSK12xx Double gang commercial faceplate, KMJ, 12 port

* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White

KmJ commercial angled Faceplates


FPSK04Axx Single gang commercial faceplate, angled KMJ, 4 port

DPSK08Axx Double gang commercial faceplate, angled KMJ, 8 port


WorKstation Ws-14

KmJ Faceplates

Stainless Steel Faceplates

• StainlessSteelConstruction

• AccommodatesanyKMJjackoradapter

• Corrosionresistant

Residential Faceplates

• Smoothsurfacefaceplates accept any KMJ jack or adapter

• Availablein oversized for coverage of imperfect drywall cuts

• Threecoloroptions

KmJ residential Faceplates


FPKS01xx Single gang smooth faceplate, KMJ, 1 port





FPK01xx Single gang smooth faceplate, Oversized, KMJ, 1 port





DPK06xx Double gang smooth faceplate, KMJ, 6 port

DPK12xx Double gang smooth faceplate, KMJ, 12 port


KmJ stainless steel Faceplates


FPSK01SS Single gang stainless steel faceplate, KMJ, 1 port





DPSK04SS Double gang stainless steel faceplate, KMJ, 4 port



WorKstation Ws-15

KmJ Faceplates

Divax Faceplates

• Designedtoblendinwithanyhomeorofficedécor

• CompletelycompatiblewithDIVAXsingle-gangrectangular electrical plates

• Mountsinanystandardelectricalbox

• CanbeusedwithallDIVAXtypeswitches

• Smooth,cleansurface

• Ultimateflexibility

Receptacle Housing inserts

• Fitsinsideanystandardelectrical faceplate

• AccommodatestwoorfourKMJ ports

industrial Faceplate Kit

• Industrialfaceplatekitincludes plate and industrial jack housing

• Sealalsoincludedforcomplete water resistance

• AcceptsanyKMJjack

• KMJJacknotincluded

KmJ divax Faceplates


FDKRxx Divax faceplate, KMJ, single gang ring

FDK2Rxx Divax faceplate, KMJ, double gang ring

FDK3Rxx Divax faceplate, KMJ, triple gang ring

FDK4Rxx Divax faceplate, KMJ, quad gang ring

FDBKxx Divax plate, KMJ, blank insert

FDKxx Divax plate, KMJ, 1 port insert

FD2Kxx Divax plate, KMJ, 2 port insert



* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 07=White or 12 = Bright White

KmJ receptacle inserts


A106Kxx KMJ Receptacle Insert, 2 port

A106K4xx KMJ Receptacle Insert, 4 port


KmJ industrial Faceplate Kit


FPWR01xx KMJ Industrial faceplate kit with housing, vertical ID window, 1 port

FPWR02xx KMJ Industrial faceplate kit with housing, vertical ID window, 2 ports

* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 12 = Bright White, or SS = Stainless Steel

WorKstation Ws-16

Wall plates & connectors

Wall plates & connectorsFor standard voice grade applications, SMP has developed a durable and practical solution that meets any residential or commercial protocol. Featuring SMP’s superior performance jacks, the SMP wall plate is guaranteed to be ideal for any single jack application.

• AvailableinStainlessSteelorfireretardantPlastic

• Easilymountsonanywall

• Mountingscrewsprovided

For applications requiring both voice grade and coaxial access, SMP created a line of smooth standard-size flush mount plates with jacks and/or f-connectors in a single-gang format. All of these wall plates install easily into standard electrical boxes and offer 110 style terminations for easy installations.

• One-piececonstruction

• Easilymountstoany standard electrical box

• 110stylepunch-down termination

• Mountinghardwareincluded

smp standard commercial/residential Wall plate


WP07 Plastic wall plate, 6 position, USOC jack, 1 port, White

WPSS Stainless Steel wall plate, 6 position, USOC jack, 1 port

WP-5E-SS Stainless Steel wall plate, Category 5e jack, 1 port

WP-A6-SS Stainless Steel wall plate, Category 6 jack, 1 port

smp Wall plates with connectors


WP1V12 Plastic wall plate with (1) 6 position, 4 conductor modular jack, Bright White

WP2V12 Plastic wall plate with (2) 6 position, 4 conductor modular jacks, Bright White

WP1F12 Plastic wall plate with (1) twist-on F-connector, Bright White

WP2F12 Plastic wall plate with (2) twist-on F-connectors, Bright White

WP1V1F12 Plastic wall plate with (1) 6 position, 4 conductor modular jack and (1) twist-on F-connector, Bright White

WorKstation Ws-17

surFace mount Boxes

surface mount BoxesWhether installing single or double gang faceplates, SMP’s Surface Mount boxes provide the depth for proper cable orientation into jacks or adapters with easy knock-outs for quick terminations. Ideal for raceway applications, SMP’s Surface Mount boxes offer a flexible approach for workstation applications.

• AvailableinSingleandDoublegang

• Mountingscrews,double-sidedtape,and cable ties included

• Perfectforracewayorcabletrayapplications

• WillaccommodateanySMPUMJorKMJfaceplate

Surface Mount Enclosures

SMP’s Surface Mount Enclosures are a low-profile, workstation solution that offers flexibility for multiple network configurations. In addition, the Axcess™ Surface Mount Enclosures are a cost effective approach for multiple desktop applications including cubicle settings and numerous workstation complexes.

• AvailableforUMJorKMJstylejacksandadapters

• Knockoutsonthreesidesaswellasinthebase for easy cable entry

• Portdesignationincludedalongwithblank port cover(s)

• Designationwindows

• Mountingscrews,double-sidedtapeandcable ties included

axcess™ surface mount Boxes


SMSGxx Surface Mount Box, single gang

SMDGxx Surface Mount Box, double gang

* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White,

axcess™ umJ surface mount enclosures


SME2xx Surface Mount Enclosure, UMJ, 2 port

SME4xx Surface Mount Enclosure, UMJ, 4 port

SME8xx Surface Mount Enclosure, UMJ, Slim-line, 8 port

SME10xx Surface Mount Enclosure, UMJ, Slim-line,10 port

KMJ Surface Mount Enclosures

SMEK1xx Surface Mount Enclosure, KMJ, 1 port



* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White (SME UMJ style only), 07 = White, or 12 = Bright White

WorKstation Ws-18

multi-media Boxes

multi-media boxesFor conditions that require a variety of media applications, consider SMP’s full product line of Multi-media boxes. The Multi-media box by SMP is a one-stop solution for all your workstation applications. It offers complete flexibility in design and can be kitted for multiple hardware options.

• Optionalplatesavailable

• Completekitsarereadyforinstallation

• Idealforsmallzonedistributionapplications

• FiberstoragemeetsTIA/EIAspecifications

• AvailableonlyforUMJstylejacksandadapters

smp multi-media Boxes


MMAPxx Multi-media box, UMJ, Blank

MMAPxxA1 Multi-media box, UMJ, Optional plate, 1 port




MMAPxxDSC1 Multi-media box, UMJ, Optional plate, (1) SM/MM Dual SC port loaded

MMAPxxDSC2 Multi-media box, UMJ, Optional plate, (2) SM/MM Dual SC ports loaded

MMAPxxDSC3 Multi-media box, UMJ, Optional plate, (3) SM/MM Dual SC ports loaded

MMA77xxP2W4 Multi-media box, UMJ, Kitted, 4 port & 3 blank sides

MMA77xxP2W6 Multi-media box, UMJ, Kitted, 6 port & 3 blank sides

MMA77xxP2W Multi-media box, UMJ, Kitted, 3 blank sides

* Replace “xx” with color choice: 00 = Electrical Ivory or 01 = Office White

WorKstation Ws-19

WorKstation Wiring diagrams

Workstation Wiring Diagrams

WorKstation Ws-20

c o p p e r u t p c a B l e

High quality Prysmian UTP cable is fully tested and

performance qualified with SMP workstation and copper

closet connectivity products.

contents:

cu-2 Cat5e UTP Cable

cu-3 Cat6 UTP Cable

c o p p e r u t p c a B l e

The information contained on pages CU-2 and CU-3 is subject to normal manufacturing tolerances. Specifications are subject to change without notice.Important Notice: Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.Warranty; Limited Remedy; Limited Liability: This product will be free from defects in material and manufacture at the time of purchase. PRYSMIAN MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at Prysmian’s option, to replace or repair the Prysmian product or refund the purchase price of the Prysmian product. Except where prohibited by law, Prysmian will not be liable for any indirect, special, incidental or consequential loss or damage arising from this Prysmian product.

copper utp caBle cu-2

4pair/0.51mm unshielded twisted pair (utp) enhanced category 5

cable description:Plainannealedcopperconductors,solidpolyethyleneinsulated,twistedpair,flameretardantPVCoverallsheathed.100Ω balanced cable suitable for Local Area Network (LAN) for horizontal distribution and backbone network cabling(100MHz).Suitablefor16MbpsTokenRing/155MbpsATMPMD/100Base–VG,T4,X,1000BaseT(Gigabit Ethernet), etc. Cable is UL listed.

Frequency(MHz.)

attenuationMaX

(dB/100m)

Pr – PrneXt Min(dB/100m)

Power SuMneXt Min (dB/100m)

Pr– Pracr Min

(dB)

Power SuMacr Min

(dB)

Pr – PreLFeXt Min(dB/100m)

Power SuMeLFeXt Min(dB/100m)

returnLoSS Min(dB/100m)

1.0 2.1 65.3 62.3 63.2 60.2 63.8 60.8 —

4.0 4.0 56.3 53.3 52.3 49.3 51.8 48.8 23.0

10.0 6.3 50.3 47.3 44.0 41.0 43.8 40.8 25.0

16.0 8.0 47.2 44.2 39.2 36.2 39.7 36.7 25.0

20.0 9.0 45.8 42.8 36.8 33.8 37.8 34.8 25.0

31.25 11.4 42.9 39.9 31.5 28.5 33.9 30.9 23.6

62.5 16.5 38.4 35.4 21.8 18.8 27.9 24.9 21.5

100.0 21.3 35.3 32.3 14.0 11.0 23.8 20.8 20.1

categorY 5e utp caBle

dimensions and mass:Overall cable diameter (nominal): 5.2 mmMass (nominal): 30.5 kg/km

specifications: EIA/TIA 568, ISO/IEC 11801, AS/NZS 3080 and AS/ACIF S008

mechanical characteristics:Minimum bending radius [mm]: 40Maximum pulling tension [N]: 150 Operating temperature range [ºC]: -20 to +60

Fire resistance characteristics:Cable meets IEC332, part 1 Specification: “Test on a single vertical insulated wire or cable”

electrical characteristics:DC resistance [Ω/100m]: 9.38 Max.Resistance unbalance [%]: 3.0 Max.Characteristic impedance [Ω]: 100 ± 15 @ 1-100 MHzMutual capacitance [nF/100m]: 5.5 Max.Capacitance unbalance [pF/100m]: 340 Max. (pair to earth)

Note: All electrical characteristics are given at 20ºC

part number: AFC-5EUTP305M-BU-PR 4 PAIR CAT5e UTP CABLE BLUE 305M CARTON BULK

cross sectional drawing

PVC Sheath

Solid Polyethylene Insulation

Plain annealed copper conductor (24 AWG)

construction detailsConductor: Plain annealed copper – 24 AWG Insulation: PolyethyleneCore Identification Pair 1: White-Blue stripes/Blue Pair 2: White-Orange stripes/Orange Pair 3: White-Green stripes /Green Pair 4: White-Brown stripes /BrownOutersheath: PVC75°CSheath colour: Blue – Standard Grey – Alternative

4pair/0.57mm unshielded twisted pair (utp) category 6

cable description:Plainannealedcopperconductors,polyethyleneinsulated,twistedpair,flameretardantPVCoverallsheathed.100Ω balanced cable suitable for Local Area Network (LAN) for high-speed horizontal distribution network cabling (250 MHz). Suitable for 100 Mbps TPDDI, 622 Mbps ATM, 1000 Base T, IEEE 802.3 & IEEE 802.5, Gigabit Ethernet, broadband digital video, etc. Cable is UL listed.Note: Although performance is guaranteed to 250 MHz this cable is tested up to 1200 MHz, results are available on request

construction detailsConductor: Plain annealed copper – 23 AWG Insulation: Solid PolyethyleneCore Identification Pair 1: White-Blue stripes/Blue Pair 2: White-Orange stripes/Orange Pair 3: White-Green stripes /Green Pair 4: White-Brown stripes /BrownOutersheath: PVC75°CSheath colour: Grey – Standard Blue – Alternative

Frequency(MHz.)

attenuationMaX

(dB/100m)

Pr – PrneXt Min(dB/100m)

Power SuMneXt Min(dB/100m)

Pr– Pracr Min

(dB)

Power SuMacr Min

(dB)

Pr – PreLFeXt Min(dB/100m)

Power SuMeLFeXt Min(dB/100m)

returnLoSS Min(dB/100m)

1.0 2.1 74.3 72.3 72.2 70.2 67.8 64.8 —

4.0 3.8 65.3 63.3 61.4 59.4 55.8 52.8 23.0

10.0 6.0 59.3 57.3 53.3 51.3 47.8 44.8 25.0

16.0 7.6 56.2 54.2 48.6 46.6 43.7 40.7 25.0

20.0 8.5 54.8 52.8 46.3 44.3 41.8 38.7 25.0

31.25 10.7 51.9 49.9 41.1 39.1 37.9 34.9 23.6

62.5 15.5 47.4 45.4 31.9 29.9 31.9 28.9 21.5

100.0 19.9 44.3 42.3 24.4 22.4 27.8 24.8 20.1

125 22.5 42.8 40.8 20.4 18.4 25.9 22.9 19.4

155.52 25.3 41.4 39.4 16.1 14.1 24.0 21.0 18.8

175 27.1 40.7 38.7 13.6 11.6 22.9 19.9 18.4

200 29.1 39.8 37.8 10.6 8.6 21.8 18.8 18.0

250 33.0 38.3 36.3 5.3 3.3 19.8 16.8 17.3

dimensions and mass:Overall cable diameter (nominal): 6.2 mmMass (nominal): 40 kg/km

specifications: ISO/IEC 11801, Class E; AS/NZS 3080; AS/ACIF S008; TIA/EIA 568B; AS 1660.5.6 (Combustion propagation)

physical & mechanical characteristics:Minimum bending radius [mm]: 50Maximum pulling tension [N]: 190 Operating temperature range [ºC]: -20 to +60

part number: AFC-6UTP305M-GY-PR4PAIRCAT6UTPCABLEGREY305MCARTONBULK

categorY 6 utp caBle

electrical & transmission characteristics:DC resistance [Ω/100m]: 9.38 Max.Resistance unbalance [%]: 3 Max. Input impedance [Ω]: 100 @ 1-250 MHz Mutual capacitance [nF/100m]: 5.5 Max.Capacitance unbalance [pF/100m]: 330 Max. (pair to earth)Delay skew [ns/100m]: 45 @ 1-250 MHzPropagation delay [ns/100m]: 536 Max. @ 250 MHzLCL [dB]: 16 Min. @ 250 MHz Voltagecapability[V]: 110Power capacity [W]: 20 per pair

Note: All electrical characteristics are given at 20ºC

cross sectional drawing

copper utp caBle cu-3

PVC Sheath

Polyethylene Filler

Solid Polyethylene Insulation

Plain annealed copper conductor (23 AWG)

c o n t a c t d e t a i l s

aFc group pty ltdPhone: 1300 AFC GroupWeb: www.afcgroup.com.auEmail: [email protected]

melbourne93-97 Merrindale DriveCroydonVIC3136(03) 9737 [email protected]

sydneyUnit 40, 5 Inglewood PlaceBaulkham Hills NSW 2153(02) 9421 [email protected]

newcastleGround Floor, 2 Portside CrescentWickham, Newcastle NSW 2293(02) 4944 [email protected]

perthUnit 1, 32 Robinson AvenueBelmont WA 6104(08) 6253 [email protected]

BrisbaneUnit 6, 333 Queensport Road NorthMurarrie QLD 4172(07) 3292 [email protected]

dubai (aFc networks FZco)PO Box 262104JAFZ Dubai UAE+971(4) 883 [email protected]

integrated communication solution – copper · encompasses a full portfolio of fibre optic...

Documents