Kitchen Doors and Panels QUOTE/ORDER FORM

Showroom and factory 80 Redfern Street, Wetherill Park(02) 9725 4444 F: (02) 9725 4777 E: sales@sydneydoors.com.au

Customer Name: Date:

I would like delivery of my doors (please enter delivery address below) I will pick up my doors

Delivery address: Mobile:

Email: Door thickness: 18mm standard or other:

Enter door design code or tick for Plain doors Order name/no: Edges of doors: Standard 3mm round Arris Colonial Other: Paint colour: Standard White or Custom colour Brand: Name of colour: Paint finish: matt 10% satin 30% (most popular) semi gloss 60% full gloss 100% Supply new Blum hinges: Soft closing or Standard No hinge hole measurements are required if you purchase new hinges from us Use own hinges: Drill One 35mm dia. hole or Blum 3 hole pattern or Hettich 3 hole pattern Note: If using your own hinges, enter the measurements from the top and bottom of the door to the centre of the hinge holes (plus more for larger doors) below.

Qty Height in mm

Width in mm

Design Door edges “X” as applicable for chosen edges on left, right, top and bottom F = Position of “Full handle” SN = Shark nose handle PANELS ONLY: S = Square edges D = Double front edges

Number of doors drilled for hinges (looking at the front of the door)

Hinge hole positions Distance in mm from top and bottom of doors. Extra’s in “Comments”

Enter comments hereNote: Panels with “D” double front edges require painting on the back. Write: either “full painted back” or “100mm painted on back” here. Enter extra hinge hole positions here.

L R T B Left (no. of doors)

Right (no. of doors)

T B

A L R

B L R

C L R

D L R

E L R

F L R

G L R

H L R

I L R

J L R

K L R

L L R

M L R

N L R

O L R

P L R

Q L R

INSTRUCTIONS: 1. Tick the appropriate boxes & enterinformation by tabbing to fields.2. Place cursor over fields for moreinstructions.3. Refer to page 3 for additionalinformation and data fields for nonstandard doors and panels.

Email Save Print

X = Design on doorP = Plain door/drawerPP = Plain panelPX = Panel with design P1 or P2 = PantryCD = Corner DoorBF = Bi Fold DoorDF = Drawer FrontFR = FrameGB# - Glazing BarBar# = Bar FrontKB = Kick Board

This is an order Extra to previous orderThis is a quote

Extra comments can be addedat the end of page 3.

Qty Height in mm

Width in mm

Design Door edges “X” as applicable for chosen edges on left, right, top and bottom F = Position of “Full handle” SN = Shark nose handle PANELS ONLY: S = Square edges D = Double front edges

Number of doors drilled for hinges (looking at the front of the door)

Hinge hole position s Distance in mm from top and bottom of doors. Extra’s in “Comments”

Enter comments here : Note: Panels with “D” double front edges require painting on the back. Write: either “full painted back” or “100mm painted on back” here. Enter extra hinge hole positions here.

L R T B Left (no. of doors)

Right (no. of doors)

T B

R L R

S L R

T L R

U L R

V L R

W L R

X L R

Y L R

Z L R

aa L R

bb L R

cc L R

dd L R

ee L R

ff L R

gg L R

hh L R

ii L R

jj L R

kk L R

ll L R

mm L R

nn L R

oo L R

pp L R

qq L R

rr L R

X = Design on doorP = Plain door/drawerPP = Plain panelPX = Panel with design P1 or P2 = PantryCD = Corner DoorBF = Bi Fold DoorDF = Drawer FrontFR = FrameGB# - Glazing BarBar# = Bar FrontKB = Kick Board

Extra comments can be addedat the end of page 3.

Pantry doors P1 = 1 (one) pattern P2 = 2 (two) patterns (standard*)

If P2: Single mid rail height (standard*) If P2: Double mid rail height between patterns

Pantry door kickboard height: ________mm. Note: bottom rail size will be added to kickboard height. If you want the bottom pattern on your pantry door to match other doors, enter height of doors to match _________mm. Pantry doors normally require 5 hinges. End panels Plain To match door design P1 or P2

If end panels have pattern(s), please specify kickboard height _________mm. If you want the pattern on your end panels to match other doors, enter the height of doors to match _________mm.

CD = Corner door. This door is the first door of a bi fold pair of doors. It is the door which is hinged to the cupboard and it requires corner door hinges. BF = Bi fold door. This is the second door of a bi fold pair of doors, which is connected to the corner door. It requires bi fold hinges.

DF = Drawer Front options. In the comments column write either "Routed as a door" or "Individual drawer fronts" next to any drawer fronts ordered. Check the overall height of the drawers, including a 3mm gap between each, is the same as adjoining doors .

FR = Glass frames or GB# = Glazing bars GB6 for 6 windows Single glass frame GB4 for 4 windows

Please fit: No glass Clear glass Opaque White Super White – (Vinyl Backed)

The lead time for painted doors is approximately 15 working days and for trade only, the lead time for unpainted doors is approximately 5 working days. Copyright Sydney Doors 2015

P1 P2

1. Routed as a door. Enter the overall size of the door in the table on page 1 or 2, then enter each drawer size in the comments section.

2. Individual drawer fronts. Enter sizes of each drawer front in the table on page 1 or 2 and nominate full or half rail sizes between each drawer in the comments section.

BAR# = Bar front panels Single mid rail between patterns (standard*) Double mid rail between patterns Enter number of patterns on bar front: If bar panel has patterns, enter kickboard height: Note: bottom rail size will be added to kickboard height

FR = Frames, Oven or Microwave frame Please specify rail sizes if they are uneven in width or other than the standard 60mm

Special Instructions:

Overall width:

Overall height:Internal width:

Internal height:

Top rail size: Bottom rail size:Left rail size: Right rail size:

Kethy door handles code: Qty of handles Centre size:

No. of lengths No. of lengths No. of lengths

Colonial - Cut to the following sizes: Heritage - Cut to the following sizes: Bullnose - Cut to the following sizes:

Dental base for capping 2400mm long No. of lengths - Cut to the following sizes:

NOTE: Glass frames will be made to match overall door design. For FR or GB#: Glass will only be supplied for Sydney metro area deliveries.

KB = Please specify the type of kickboard you want and the sizes you’d like them cut to on the table on page 1 or 2. Painted to match doors Brushed Aluminium finish

Capping mould 3600mm long

EMAIL SAVE PRINT

PAGE 3: NON STANDARD DOOR AND PANEL DETAILS *Standard means when the customer does not specify details, the job will be done as per the industry standard.

Click the appropriate box to make your selection: (Note: diagrams are not drawn to scale)

Please click on the following icons to Email, Save, Print or return to page 1.