instructions for the pcb stackup programbwd-inc.com/pcb_stackup/pcb_stackup3.pdfinstructions for the...
TRANSCRIPT
Instructions for the PCB Stackup Program
www.bwd-inc.com Page 1 of 11
1. Always save your different worksheets under the projects name and use this Booklet as atemplate!!
2. All Foil constructions will begin layers1 and 2 with a foil and prepreg between these twolayers.
Foil construction example:
3. All Cap construction will begin layers1 and 2 with a Core and prepreg between these twolayers.
Cap construction example:
Instructions for the PCB Stackup Program
www.bwd-inc.com Page 2 of 11
4. Column B = physical Electrical layers.
5. Column C = Finished Oz Cooper.
Instructions for the PCB Stackup Program
www.bwd-inc.com Page 3 of 11
6. Column D = Core #.
7. Column E= Stackup Column.
Instructions for the PCB Stackup Program
www.bwd-inc.com Page 4 of 11
8. Column F = Prepreg and Core material Types. (Core type enter by hand) prepreg usedropdown.
9. Column F prepreg dropdown list options.
Instructions for the PCB Stackup Program
www.bwd-inc.com Page 5 of 11
10. Column E dropdown options on layer type Signal list.
11. Column G = Prepreg ply sheet usage counts.
Instructions for the PCB Stackup Program
www.bwd-inc.com Page 6 of 11
12. Column H = Prepreg before pressed thickness.
13. Column I = Prepreg thickness after press. ~ this is an approximate value ~
Instructions for the PCB Stackup Program
www.bwd-inc.com Page 7 of 11
14. Columns K_O = Symbols and running total values.
15. Bottom Tabs Assignments.
Instructions for the PCB Stackup Program
www.bwd-inc.com Page 8 of 11
16. Columns AC_AP = Dropdown list assignments.
17. Columns W_AB = Prepreg names and Variables.
Instructions for the PCB Stackup Program
www.bwd-inc.com Page 9 of 11
18. Column E_I Cell E1_I1 = Layer model ID and Final Thickness of the PCB Model.
19. Rows 1-9 Are stationary fixed position at all times.
Instructions for the PCB Stackup Program
www.bwd-inc.com Page 10 of 11
20. Rows 10 … 999+ are adjustable!
21. Final 10 layer stackup full view.