Instructions for resetting the IP address of an Elite Reader

1. Follow the directions below to reach the Webmin Console.

Choose “Network

Configuration”

Change the IP address to the

one desired. The Subnet Mask

should be 255.255.255.0 or

255.0.0.0

The gateway will match the first

three numbers of your chosen

IP address but the last number

will always be #1(10.19.1.1,

192.168.0.1…)

Then, save as per the instructions below. Remember, if you change from a “10.19.1.***” address to a

“192.168.0.***” address, you will also need to change the fixed IP address of your computer as well.