Godrej & Boyce Mfg. Co. Ltd.Head Office: Plant 17, Pirojshanagar, Vikhroli, Mumbai 400 079 INDIA. Fax: +91 22 6796 1509Toll-free: 1800 108 1200 I For service: secare@godrej.com I Website: www.godrejsecure.com

The contents and information on the catalogue is for general purposes and is provided on "as is" basis. The recommendations of level of strength are relative and completely depend on the nature of tools used for any attack. All safes can be broken open given sufficient time, tools, torch (Basic or simple home tools) expert skill and access. All warranties, recommendations and representations of any kind mentioned herein are disclaimed, including the implied warranties of merchantability and fitness for a particular use. The Company disclaims any claims, losses, demands, or damages of any kind whatsoever arising out of or resulting by reason or in consequence of any illegal breaking open of Home / Office Safes, Video Door Phones, Burglar Alarm Systems, or any theft, fire, robbery, fraud or other wrongful act done by any third Party with regard to Home / Office Safes, Video Door Phones, Burglar Alarm Systems including but not limited to direct, indirect, incidental, or consequential loss or damages, compensatory damages, injury, economic loss, or otherwise resulting from theft, fire, robbery, fraud or other wrongful act done by any third Party. The specifications, prices and features of the products may be changed at the sole discretion of the Company without prior notice. ISO 9001:2008/ISO 14001:2004/ BS OHSAS 18001:2007

Connect with us: /GodrejSecure @godrejsecure INSTRUCTION MANUAL

GS

S/V

isco

mm

/B2C

Com

mer

cial

/Aur

um In

stru

ctio

n M

anua

l/Apr

il201

6/V

1

RECOMMENDATIONS

1

INDEX

• RECOMMENDATIONS..............................................................................................1

• INSTRUCTIONS FOR OPERATING GODREJ LOCKS................................................2-3

• COMBINATION LOCK (DELTA LOCK).......................................................................4-5

• COMBINATION LOCK (LA GARD MECHANICAL)....................................................6-10

• BIOMETRIC LOCK (SECURAM)...............................................................................11

• WARRANTY CARD...................................................................................................13

DAMAGE IN TRANSIT

Before dispatching from the factory, all articles are carefully examined and securely packed by expert packers. In order to avoid damage, all articles are loaded by our trained men. Goods are likely to be damaged while in transit and/ or when unloaded at destination. This is due to manhandling during loading and unloading from the truck/rail wagon. Therefore, we request you to instruct the stakeholder to ensure that the unloading is done carefully.

As we take all the necessary precautions to keep the product safe while dispatching, we do not accept any liability for damage inflicted in transit.

UNPACKING AND LEVELLING

The safe should be unpacked only after it is taken to the site for smooth operation of the door. Before using the safe, make sure that the surface is levelled. To do the same, you need to stuff paper packing wherever required.

KEYS

(Packed inside the safe. To open the safe, turn the bolt handle)

DON'T keep the Duplicate Key in the safe itself. Keep it in a sealed cover or keep it somewhere else in a safe place. Note down the number of the key as reference; it will be required to issue a duplicate key incase the original is misplaced/lost.

DON'T keep both the keys of the safe in the same bunch. In this way, you will always have one key as a backup in case you lose the original. The safe can thus be operated in joint custody, enabling one to operate the safe in absence of the owner.

DON'T expose the safe to rain water while in transit. Cover it up with tarpaulin or water proof paper. Safes need special protection as their fire resisting capability is likely to be affected by water. Safes in basements or on ground floors must be placed on stands to keep them safe from water.

DON'T paste paper labels on the safe as the sticker glue of the label contain water. Paint letters instead, or preferably use our label holder (or engraved) name plate.

OILING SAFES

Oil the pivots, especially the upper atleast once a month over the upper lug. There is a hole provided to oil the pivot

GODREJ & BOYCE MFG. CO. LTD.

"APPLICABLE ON 49, 61 AND 81 DEFENDER AURUM SAFES AND 61 DOUBLE DOOR DEFENDER AURUM SAFES"

INSTRUCTIONS FOR OPERATING GODREJ LOCKS

GODREJ & BOYCE MFG. CO. LTD.

"APPLICABLE ON 26,31 AND 41 DEFENDER AURUM SAFES"

INSTRUCTIONS FOR OPERATING GODREJ LOCKS

CLOSING OPENING

First Operation

Second Operation

First Operation

Key -1

Turn

Key -2 Key -2

TurnTurn

LOCK

Second Operation

Key -1

Turn

32

• GODREJ Safes are supplied in unlocked condition at the time of delivery

• Keys of the above mentioned safes are marked with prefix "SP"

• GODREJ Safes are supplied in unlocked condition at the time of delivery

LOCKS

CLOSING OPENING

First Operation

Second Operation

First Operation

Second Operation

UPPER LOCK A

LOWER LOCK B

Key A-1

Turn

Key-2 Key A-1Key-2

Key B-1

Turn

Key-2 Key B-1Key-2

Turn

Turn

Turn

Turn

Turn

Turn

DELTA LOCK

Model: LK 1200 for 3 Wh. Comn LockModel: DR 2300L for Front Reading Dial With Dial Lock

Model: DR 2300 for Front Reading Dial Without Dial Lock

OPENING THE LOCK USING THE OPENING INDEX

If the safe comes with a factory-set combination on 50, turn the dial to the left and pass the number 50 four times. Then align it with 50 on the opening index. Turn RIGHT until the dial stops. The combination lock bolt will retract and the safe can be opened.

To open Lock with a previously-set combination, for example, 10-20-

30:

Turn the dial to the LEFT at least four times completely to clear the

combination lock to accept the combination.

Using the OPENING index, turn the dial LEFT and pass the first number of the combination, 10, three times and stop exactly on 10 the fourth time.

Turn dial to the RIGHT and pass 20 two times and stop exactly on 20 the third time.

Turn the dial LEFT and pass 30 once and stop exactly on 30 the second time.

Turn the dial to the RIGHT. When the lock is open, the dial will not turn to the right anymore.

To lock the combination lock, turn the dial four times completely to the LEFT.

CHANGING THE COMBINATION ON THE CHANGING INDEX

To change the combination, you will need access to the existing combination and a change key.

To change the combination, you must first open the safe door by dialing the combination, 10-20-30. With the bolt fully retracted (Lock open), before changing combinations, verify that the dial stops at '0' on the opening Index.

OPERATION AND CHANGING INSTRUCTION (continued)

Operating and changing instructions for Delta Make 3 Wheel Mechanical Combination Lock.

Next dial the existing combination 10-20-30, as described previously, on the CHANGING INDEX, but STOP the dial on 30 which is the last number of the combination.

In the back of the door, insert the Change Key into the key hole. If the Change Key does not go in, the wheels are not lined-up in order to be changed, and you must dial the combination again on the

Changing Index.

Turn the Change Key to the RIGHT until it stops (approximately one-quarter turn). Leave the key in the lock. Select a new combination, such as 40-50-60. Never select a number from 0 to 20 (the forbidden zone) as the last number of the combination.

Using the CHANGING INDEX this time, turn the dial to the LEFT and pass 40 three times and stop exactly on 40 the fourth time on changing index.

Turn the dial to the RIGHT and pass 50 two times and stop exactly on 50 the third time on changing index.

Turn the dial LEFT and pass 60 once and stop exactly on 60 the second time on changing index. Leave the dial on 60.

Now turn the Change Key to LEFT until it stops and REMOVE the key.

Completely dial the new combination, 40-50-60, on the OPENING Index, several times to make sure the combination lock opens before you shut and lock the door off the safe.

After changing, always dial the new combination and retract the combination lock bolt several times before shutting and locking the vault or safe door.

NOTE:

• The lock bolt must move freely in the lock body.

• Pressure against the lock bolt should be avoided.

• While setting or operating of lock, the direction of rotation of Dial should be uniform.

Operating and changing instructions for Delta Make 3 wheel Mechanical Combination Lock

CHANGING INDEX OPENING INDEX

Figure 1

OPEN LOCK WITH THE FACTORY COMBINATION

LA GARD mechanical locks are shipped with the factory combination of 50. Open using the opening Index:

Turn dial to the LEFT (CCW) passing "50" threetimes. Then stop exactly on the number "50"

4 x the fourth time.

Turn the dial to the RIGHT (CW) until it stops and the bolt retracts.

NOTE: Variations in the alignment of the dial ring during installation could cause the Factory Combination of 50 to vary slightly, either up or down by one or two numbers.

NOTE: If using the VisionGard Dial (2085 or 2090 Series) and a lock with the factory combination, the lock will open on 47.

NOTE: When dialing a combination, if you passed the number on which you intended to stop, you cannot reverse the dial to correct. The opening procedure must be repeated from the beginning.

SET COMBINATIONTo change the combination, you will need to know the existing combination and have a LA GARD change key (P/N 1307).

CAUTION: When selecting a combination, choose a three number sequence from 0 - 99. NEVER select numbers 0 to 20 as the LAST NUMBER of the combination. This is the "Forbidden Zone" and can cause the lock to malfunction. For security purposes, do not select a combination from personal data such as birth date, phone number, etc.

1. Dial the existing combination using the CHANGING Index. (Figure 1.)2. STOP the dial on the third number of the combination.3. Insert the change key into the change key hole. (Figure 2.)

NOTE: If the change key does not go in easily, the wheels are not aligned. Repeat steps 1-3.

4. Turn the change key to the RIGHT (CW) one-quarter turn until the key

Figure 2

GROUP 2 & 1 COMBINATION LOCKS

stops. (Figure 2.) Leave the change key in the lock while setting the new combination.

5. Next turn the dial to the LEFT (CCW) at least four complete rotations to clear the lock. The lock is now ready to accept the new combination.

CAUTION: Do not spin the dial to clear the lock.

6. Set the new combination using the CHANGING Index: EXAMPLE COMBINATION: 10-20-30

4 x Turn the dial LEFT (CCW) passing the first number in the combination V-/* (10) three times. Then stop exactly on the number "10" the fourth time.

3 x Turn the dial RIGHT (CW) passing the next number in the combination ^ (20) two times. Then stop exactly on the number "20" the third time.

2 x Turn the dial LEFT (CCW) passing the last number in the combination (30) one time. Then stop exactly on the number "30" the second time.

7. Hold the Dial to prevent movement and turn the change key to the LEFT (CCW) one quarter turn.

8. Remove the change key. The new combination is now set.

ALWAYS perform the combination test with the safe door open!Test the new combination several times using the opening procedure below.

OPEN LOCK WITH A SET COMBINATION

Dial the set combination using the OPENING Index. EXAMPLE COMBINATION: 10-20-30

4 x Turn the dial LEFT (CCW) passing the first number in the combination V-' (10) three times. Then stop exactly on the number "10" the fourth time.

3 x Turn the dial RIGHT (CW) passing the next number in the combination (20) two times. Then stop exactly on the number "20" the third time.

2 x Turn the dial LEFT (CCW) passing the last number in the combination V-J (30) one time. Then stop exactly on the number "30" the second time.

Turn the dial to the RIGHT (CW) until it stops and the bolt retracts.

NOTE: When locking the safe, always turn the safe handle to the locked position (bolts extended) before turning the lock dial four complete rotations to the LEFT (CCW) to relock. If you notice any resistance, DO NOT force the dial to turn. This may cause damage to the lock.

(P/N) 723.069 Rev B 01/11 • © copy right 2009-2011Kaba Mas LLC

76

LA GARD MECHANICALGroup 1, Group 2 & Group 2M Locks

OPERATING & CHANGING INSTRUCTIONS

LA GARD MECHANICAL3390 SERIES GROUP 2M LOCK

INSTALLATION INSTRUCTIONS

Read the guide carefully before beginning with the installation.

SAFEGUARD FOR MOUNTING

1. Complete all welding work on the safe before installing the lock.2. Keep metal dust, filings, etc. away from the lock. 3. Never oil, grease, lubricate or paint the lock.4. If possible, keep cables away from sharp edges and moving parts.5. If possible, never lift the lock by the cable.

Group 2M Mechanical Lock (3390 Series)

Hardware Pack, US (P/N704004) Includes2. Spline Key (P/N1712)3. Mounting Screws (P/N2930-Qty.2) 4. Mounting Screw (P/N1819) 5. Change Key (P/N1307)6. Insert Cover (P/N705002)

Hardware Pack, Metric (P/N704003)Includes2. Spline Key (P/N1712)3. Mounting Screws (P/N 705006 - Qty. 2)4. Mounting Screw (P/N 205014)5. Change Key (P/N 1307)

Group 2M Mechanical Lock (3390 Series) INSTALLATION INSTRUCTIONS

1. If required, locate, drill and tap the two holes to mount dial ring, the spindle, and three holes to mount the lock assembly on the inside of the safe door. Use the installation template (P/N 740.118) available online at www.kaba-mas.com

2. Attach the lock assembly to the door using the three US mounting screws provided. Tighten the mounting screws to a torque setting of 30in./lbs. (3.4Nm). Insert short mounting screws into the hole with marking (Figure6). This screw should not be removed during servicing of the lock.

NOTE: Ensure the lock assembly spindle hole is properly aligned with its spindle through the hole in the safe door.

3. Measure total mounting thickness (door thickness + mounting plate) (Figure2).4. Cut the spindle to a length of .875" (23mm) plus the total mounting thickness.5. Mount the dial ring from the centre, and the through hole. Attach it to the safe door using the two

mounting screws supplied with the dial assembly. The opening index reference mark must be in the twelve o'clock position (Figure3).

NOTE: It is recommended to keep the lock bolt in the retracted position throughout the installation procedure, It prevents interference by the boltworks during installation. To ensure this, keep one finger over the bolt while mounting the lock and installing the spindle. If the bolt

extends at any point during the installation procedure: the bolt may be retracted by following the Retracting the Lock Bolt instructions on page two

6. Insert the spindle through the spindle hole of the door. With the bolt retracted, carefully thread the spindle (clockwise) into the drive cam until it istight. Next, rotate (counter clockwise) at least 1/2 turn until the groove in the spindle is aligned with the correct spline position. (Refer to the Spline Key Position Chart - Figure4).

7. Insert the spline key fully by tapping it into place with a screwdriver using insertion notch (Figure5).

8. Install Cover Insert (P/N 705002), Figure 8. Press the Insert into the cover it using even pressure. The insert is designed to prevent Spline key movement. Once installed do not attempt to remove the insert. Remove the back cover to service the lock: this will not void the factory warranty.

CHANGING INDEX OPENING INDEX

Figure 3

SPLINE KEY POSITION CART

The lock can be mounted in four positions by aligning the spindle groove with the corresponding cam position. The positions are marked as follows:

RH (right hand) Lock bolt should point right as you face the back of the door.

LH (left hand) Lock bolt should point left as you face the back to the door.

VU (vertical up) Lock bolt should point upwards.

VD (vertical down) Lock bolt should point downwards.

LAGARD mechanical locks are shipped with the factory combination of 50. To open:

1. Turn dial to the LEFT (counter-clockwise) passing 50 atleast +four times.

2. Stop when 50 lines - up with the Opening Index (Figure3).

3. Turn RIGHT(clockwise) until dial stops, this will retract the bolt. (This may vary slightly by one or two numbers either up or down due to variations in alignment of dial ring during installation.)

NOTE: If using the VisionGard Dial (2085 or 2090 Series) and lock with the factory open on 47.

LH

VDVU

RH Figure 4

+

L H

VD

AH

VU

L H

VD

AH

VU

Figure 5

Figure 7

Figure 6

Figure 8

RetainingScrew

L H

VD

AH

VU

1

5

6 3

4

2

98

Figure 2 Optional hardplateor mounting bracket

Total Mounting Thickness(plus. 875")

RETRACTING THE LOCK BOLT

The 3390 Series Group 2M Mechanical lock is shipped with the bolt in the retracted position. If the bolt becomes extended during the installation process, It can be retracted before splining the lock.

To retract the bolt:

1. While viewing the back of the lock, insert a small flat object, such as a screwdriver, into the spline notches in the cam, in order to rotate it.

2. Rotate the cam to the right (clockwise) at least 4 complete times.

3. Then align the mark on the drive cam with the one on the back cover (Figure7). (Mechanical tolerance +/- the width of the of the case alignment mark.)

4. Rotate the cam to the left (counter clockwise) until the bolt is retracted (approximately 1/2 turn).

5. Holding the bolt in the retracted position, the spindle can now be threaded into the cam without the cam rotating. Insert the spline key using the spline key position chart.

Design Parameters for 3390 Series Locks

1. Bolt dimensions (nominal): .312 inches x 1.000 inches/ 8 x 25.4 mm

2. Bolt dimensions (nominal): .355 inches/9.0mm

3. Bolt extension: .485 inches/12.3m

4. The spindle hole diameter can be a minimum of .406" (10.3mm) to a maximum of .438" (11.1mm). The .406" (10.3mm) diameter is recommended. Spindle hole must be debarred.

5. The lock mounting screws (1/420 or M6) require tapped holes: the recommend depth is 375"(9.83mm), but a minimum depth of 250"(6.35mm) is required.

6. When mounting the lock unit (i.e. integrating it in a bolt work), make sure that the lock bolt has clearance to freely move to it send positions and that the shifting force works only in the axial direction (direction of movement).Lateral forces should not be exerted on the lock.

7. Maximum load movable by the bolt: 5 lbs. (22N)

NOTE: 3390 dead bolt lock may not open If more than 5lbs.(22N)of force is applied to the end or side of the bolt

8. Maximum load against bolt when thrown (all directions) should be:224.8lbs.(1kN)

9. If other parts of the boltwork are to be connected to the lock unit (e.g..for activating a blocking device), corresponding adapters can be fixed with screws (# 10 - 32 or M4) to the front of the lock bolt (tightening torque for 15mm screwing depth: 200Ncm maximum).

10. The lock can be fitted to safes or vault doors of any material.

1110

ScanLogic D22

SecuRamR

SecuRam. Security You Can Trust. Ram Tough.

FPC-0601A-D22 Entrypad

EL-0601 SwingBolt Lock Body

Works with these Lock Bodies also:

DeadBolt

SpringBolt

StrikeBolt

®SecuRam is the registered trademark of SecuRam Systems Inc. USA

Part#: FPC-0601A-D22

Security Expert Since 1991

Select your Lock Body:SwingBolt EL-0601SwingBolt w/Status EL-0601-SDeadBolt EL-0701SpringBolt EL-0801StrikeBolt EL-0901

• ScanLogic D22 – Biometric Safe LockThe ScanLogic D22 is a very reliable and robust biometric safe lock system ideal for commercial applications. The ScanLogic D22 features SecuRam’s rugged stainless steel construction, optical fingerprint authentication and 1,000 event audit reporting.

• Simple to Use. Reliable.• Place your registered finger on the optical reader and turn the safe

handle. That’s it. • Easy fingerprint enrollment process; Open with fingerprint and/or code. • ScanLogic D22 supports 30 fingerprints and 30 codes plus a 1,000

event date and time stamped audit trail.• Every SecuRam lock undergoes a 2,000 cycle quality management

program before it leaves the manufacturing facility. Unprecedented commitment to quality and reliability.

• Features• Supports 30 fingerprints with our patented OneTouch fingerprint

verification – 6 digit codes• 1,000 event date and time stamped audit trail• Programmable Time Delay 0-99 minutes; 0-15 minute Time Window• Time Delay Overide Codes – selectable• Duress Time Delay allows you to program the Time Delay value when

under duress operation• Recovery Code• Single or Dual Modes• Enable / Disable User Codes• Can Control up to 4 locks and authorize user access for each lock• Standard footprint and mounting pattern, easy retrofit for any

mechanical or electronic safe lock• SureLock Battery Management and AC power optional• Finishes available: Chrome, Brass, Black Chrome, Nickel• Can be paired with any other SecuRam motorized safe lock actuators.

1312

NOTES WARRANTY CARD

Date of purchase : Invoice No. :Item Description : Model No. :Company/WDs Name : Serial No. :Address & Stamp :Signature :

M/s. Godrej & Boyce Mfg. Co. Ltd. through its Godrej Security Solutions Business (hereinafter referred to as "the Company"), undertakes and gives warranty to the original purchaser as follows:

The Company warrants that if within a period of 12 (twelve) months from the date of purchase of theproduct bearing Sr.No. mentioned above, the same is found defective on account of any of its parts proving to be defective in material or workmanship, the same shall be repaired or replaced free of charge. The question, however, whether the product as a whole or any of its parts are defective or inoperative due to faulty material or workmanship shall be within the sole discretion of the Company. This is also subject to the further condition that the product is brought to the Company's notified authorised service centre by the purchaser at his own risk, the expenses and carriage paid both ways. In the event, the Company carries out repairs or replacement of any parts during the said warranty period, the warranty shall thereafter continue only for the unexpired period of the original warranty and the purchaser shall not be entitled to insist on the original warranty being extended from the date of such repairs or replacement. The Company, however, shall not be liable to carry out the repairs or replacement within any specified time. This warranty is not valid for:

a) damage resulting from accident, mishandling, negligence, tampering, fire, acts of nature, loss of components or accessories

b) replacement/repairs by people other than the authorised personnel

c) the consumable parts like batteries, plastic parts etc. and accessories.

This warranty shall not extend towards the payment of any compensation to anyone or entitle the purchaser to a replacement of the product as a whole, and expressly excludes any claim for consequential loss or damage.

This Warranty Card must be duly filled in, stamped and signed by the Dealer. This card and the relevant cash memo must be preserved and be produced alongwith the defective units.

This warranty is valid only for purchases and installations effected from the Company/Company'sauthorised outlets.

This warranty will apply if and only if the purchaser has taken due care in the use and maintenance of the product as specified by the Company and has not mishandled it. It is made specifically clear, that under no circumstances will the Company incur any liability for any damage caused due to the gas leakage / fire / burglary / power fluctuations etc. if undetected either by malfunctioning or by improper usage or lack of maintenance.

This warranty will not apply if the defect is not notified to the Company or its representative within 7working days from the date the purchaser becomes aware of the defect in the product; if the product is shifted from its original location of installation to a new location without prior written intimation to the company or its authorised Service Centre.

Any claim made under this warranty shall be subject only to the jurisdiction of the courts in Mumbai.

NOTES NOTES

NOTES NOTES