instruction manual ¯+xb$ > · 2020. 10. 19. · instruction manual ¯+xb$ > thank you for...
TRANSCRIPT
INSTRUCTION MANUAL
Thank you for buying OMP HOBBY products.The is the latest technology in Rotary RC mldels.Please read this manual carefully before assembling and flying the New helicopter. We recommend that you keep this manual for future reference regarding and maintenance
#1 BY DESIGN
2
Fly only in safe areas,away from other people. Do not operate R/C aircraft within the vicinity of homes or crowds of people .R/C aircraft are prone toaccidents,failures,and crashes due to a variety of reasons including,lack of maintenance,pilot error, and radio interference. Pilots are responsible for theiractions and damage or injury occurring during the poeration or as of a result of R/C aircraft models.
SAFETY NOTES
We recommend that you obtain the assistance of an experienced pilot before attempting to fly our products for the first time, A lcoal expert is the bestway to properly assmble , setup, and fly your mldel for the first time .M2 Helicopter requires a certain degree of skill to operate, and is a consumeritem. Any damage or dissatisfaction as a result or accidents or modifications are not covered by any warrantee and cannot be returned for repair orreplacement. Please contact our distributors for free technical consultation and parts at discounted rates when you experience problems duringoperation or maintenance.
R/C helicopters, including The M1 are not toys.R/C helicopter utilize various high-tech products and technologies to provide superiorperformance.lmproper use of this product can result in serious injury or even death. Please read this manual carefully before using and make sure tobe conscious of your own personal safety and the safety of others and your environment when operating allOMPHOBBY products.
Manufacturer and seller assume no liability for the operation or the use of this product . lntended for use only by adults with experience flying remotecontrol helicopters at a legal flying field. After the sale of this product we cannot maintain any control over its operation or usage.
IMPORTANT NOTES
Do not attempt under any circumstances
Mishandling due to failure to follow these instructions may result in danger.
Mishandling due to failure to follow these instructions may result in damage or injury.
WARNING LABEL LEGEND
The M1 is a new product developed by OMPHOBBY. lt features the best design available on the Micro-Heli market to date, providing flying stability forbeginners,full aerobatic capbility for advanced fliers, and unsurpassed reliability for customer support.
Thank you for buying OMPHOBBY Products. The M1 Helicopter is designed as an easy to use,full featured Helicopter R/C model capable of all formsof rotary flight. Please read the manual carefully before assembling the model, and follow all precautions and recommendations located within themanual. Be sure to retain the manal for future reference, routine maintenance, and tuning.
INTRODUCTION
WARNING!
! CAUTION
FORBIDDEN
! CAUTION
EN WWW.OMPHOBBY.COM
模型商品属于需高操作技术且为消耗性之商品,如经拆装使用后,会造成不等情况零件损耗,任何使用情况所造成的商品不良或不满意,
将无法于保质期内更换新品或者退货,如遇有使用操作维修问题,本公司全球分公司或者代理商将提供技术指导,特价零件供应服务。
BeerOperate this unit within your ability.Do not fly under tired condition and improper operation may cause in danger
ALWAYS BE AWARE OF THE ROTATING BLADES
SAFE OPERATION
R/C models are made of various forms of plastisc.Plastic is very susceptible to damage or deformation due to extreme heat and clod climate .Makesure not to store the model near any source of heat such as an oven,or heater.lt is best to store the model indoors ,in a climate-controlled,roomtemperature environment.
KEEP AWAY FROM HEAT
During the operation of the helicopter,the main rotor and tail rotor will be spinning at a high rate of speed .The blades are capable of inflictingserious bodily injury and damage to the environment.Be conscious of your actions,and careful to keep your face,eyes,hands,and loose clothingaway from the blades.Always fly the model a safe distance from yourself and others,as well as surrounding objects.Never take your eyes off themodel or leave it unattended while it is turned on.Immediately turn off the model and transmitter when you have landed model.
(Recommend you to practice with computer-based flight simulator.)The guidance provided by an experienced pilot will be invaluable for the assembly,tuning,trimming,and actual first flight.
Before turning on your model and transmitter,check to make sure no one else is operating on the same frequency.Frequency interference cancause your model,or other models to crash.
OBTAIN THE ASSISTANCE OF AN EXPERIENCED PILOT
PREVENT OPETATION
Please use the replacement of parts on the manual to ensure the safety of instructors.This product is for R/C model,so do not use for other purpose.
It is crtical to keep the model and associated equipment away from moisture and other contaminants.The introduction or exposure to water ormoisture in any form can cause the model to malfuntion resulting in loss of use,or a crash .Do not operate or expose to rain or moisture
R/C models are composed of many precision electrical components.
PREVENT MOISTURE
For the first practice,please choose a legal flying field and can use a training skid to fly for reducing the damage .Do not fly your model ininclement weather,such as rain,wind snow or darkness.
Do not fly near buildings,high voltage cables ,or trees to ensure the safety of yourself,others and your model.
LOCATE AN APPROPRIATE LOCATION
R/C helicopters fly at high speed ,thus posing a certain degree of potential danger .Choose a legal flying field consisting of flat,smooth groumdwithout obstacles.
FORBIDDEN
FORBIDDEN
FORBIDDEN
WARNING!
WARNING!
! CAUTION
! CAUTION
3 ENWWW.OMPHOBBY.COM
Precautions before use
REVENT IMPROPER OPERATION 勿不当使用本产品
When you see the marks as below,please use glue or greae to ensure flying safety.
Scissors Cutter Knife Diagonal Cutting Pliers Needle Nose Pliers
BLUE Glue width:approx 1mm
AB Glue ABCAOilHexagon Screw DriverPhilips Screw Drive
EQUIPMENT REQUIRED FOR ASSEMBLY
2
Grease
Repeat Multiple Times
Apply BLUE Threadlock Apply Petroleum-Based,Light Viscosity Lube
Loosely Tighten
Apply NO Threadlock Apply SyntheticGrease
Fully Tighten
Apply MEDIUM CA
4EN WWW.OMPHOBBY.COM
Specifications
Lenght 290mm
Specifications
Height 88mm
Main Blade 125mmMain Rotor Diameter 290mm
Tail Rotor Diameter 46.5mm
Flying Weight 125g
5 ENWWW.OMPHOBBY.COM
Direct drive main and tail rotor design with dual brushless motor
All metal 7075 aluminum alloy material flybarless head design
Airframe all carbon fiber lightweight design
Streamlined low wind resistance hood design
4 in 1 OFS control system
Attitude stabillization mode and 3D lock mode switch freely
290mm
88mm
125mm290mm
46.5mm
125g
7075
290
88
290
118g
125g
Flying Weight : ~118g(ENG)
Flying Weight: ~125g(ENG)
118g
125g
Flying Weight : ~118g(ENG)
Flying Weight: ~125g(ENG)
起飞重量约:约118g(Plastic shell servo)
起飞重量约:约125g(All metal servo)
Flying Weight : ~118g(ENG)
Flying Weight: ~125g(ENG)
step 1
! CAUTION
(
6EN WWW.OMPHOBBY.COM
Bearing-682ZZ
Washer
Main rotor holder
Washer(
Washer
Bearing-682ZZ
Bearing-682ZZ(
Washer
Metal main rotor housing
Feathering shaft
Grease
Damper rubber
Washer
Washer
M1.6x3mm
Socket screw
Damper rubber
(M1.6x3mm)x2
Socket screw
! CAUTION
原装组装完成品,每一次飞行前请先确认螺丝是否已上胶不会松动。
The original assembled finished product, please confirm whether the screws were glued and would not loose before each flight.
横轴螺丝锁紧后,请注意桨夹能够转动顺畅!After the cross shaft screws are tightened, please note that the propeller clamp can rotate smoothly.
原装组装完成品,每一次飞行前请先确认螺丝是否已上胶不会松动。
The original assembled finished product, please confirm whether the screws were glued and would not loose before each flight.
横轴螺丝锁紧后,请注意桨夹能够转动顺畅!After the cross shaft screws are tightened, please note that the propeller clamp can rotate smoothly.
Cross shaft
原装组装完成品,每一次飞行前请先确认螺丝是否已上胶不会松动。
The original assembled finished product, please confirm whether the screws were glued and would not loose before each flight.
横轴螺丝锁紧后,请注意桨夹能够转动顺畅!After the cross shaft screws are tightened, please note that the propeller clamp can rotate smoothly.
Cross shaft
7 ENWWW.OMPHOBBY.COM
step 2
(M1.6x5mm)x3
Socket screw Bearing-MR63ZZ
Bearing-MR63ZZ
Motor Mount
(M1.4x2mm)x1
Socket screw
Servo Mount
M1.6x5mm
Socket screw
M1.4X3Socket screw
Main motor
Spindle retaining ring
8EN WWW.OMPHOBBY.COM
step 3
(M1.4)x1M1.4 Nut
(M1.4x8mm-L3)x2Socket screw
(
Washer
Copper sets
(M1.4x6mm-L2)x1Socket screw
3 SET
(M1.4x4)x3Linkage Ball
Socket screw
M1.4x3mm
Socket screw
Metal Servo
Linkage Ball
Servo Arm
M1.4x8mm-L3
Socket screw
Washer
Copper sets
Main Pitch Control Arm(M1.4)
M1.4 Nut
M1.4x6mm-L2
Socket screw
Swash plate
Servo HornServo Horn
9 ENWWW.OMPHOBBY.COM
step 4
M1.4x4mm
Socket screw
M1.4x4mm
Socket screw
M1.4x4mm
Socket screw
(M1.4x4mm)x2Socket screw
(M1.4x4mm)x4Socket screw
舵机装配完成视图Servo assembly completed view.舵机装配完成视图Servo assembly completed view.舵机装配完成视图Servo assembly completed view.
10EN WWW.OMPHOBBY.COM
step 5
CH1CH1 Linkage rod
CH2CH2 Linkage rod
CH3CH3 Linkage rod
M1.6x3mm
Socket screw
Vertical Stabilizer
Tail Motor
Tail Blade
Tail Boom
Socket screw
Socket screw
(M1.6x3mm)x3
Socket screw
! CAUTION
ENG
(ST1.4x6mm)-1
Socket screw
(ST1.4x4mm)-1
Socket screw
(ST1.4x6mm)-1
(ST1.4x4mm)-1
M1.4x3mm
Socket screw
(M1.4x3mm)x1
Socket screw
Before each flight, please check whether the tail rotor and motor shaft match is loose. If it is loose, please check the tail rotor fastening screws.Before each flight, please check whether the tail rotor and motor shaft match is loose. If it is loose, please check the tail rotor fastening screws.Before each flight, please check whether the tail rotor and motor shaft match is loose. If it is loose, please check the tail rotor fastening screws.
11EN WWW.OMPHOBBY.COM
step 6
ENG
Left side panel
Swash plate plastic phase seat
Right side panel
M1.6x4mm
Socket screw
M1.6x4mm
Socket screw ST1.4x6mm
Socket screw
ST1.4x6mm
Socket screw
ST1.4x4mm
Socket screw
Canopy Support
(M1.6x4mm)x4
Socket screw
(ST1.4x6mm)-7
Socket screw
(ST1.4x4mm)-1
Socket screw
ENG
First, preassemble the left and right side panels of the fuselage and the swash plate phase seat, without locking screws temporarily.
ENG
First, preassemble the left and right side panels of the fuselage and the swash plate phase seat, without locking screws temporarily.
ENG
First, preassemble the left and right side panels of the fuselage and the swash plate phase seat, without locking screws temporarily.
12EN WWW.OMPHOBBY.COM
step 7
Landing skid
ST1.4x4mm
Socket screw
ST1.4x4mm
Socket screw
ST1.4x4mm
Socket screw
Flight Control
(M1.4x4mm)x4
Socket screw
(ST1.4x4mm)-4
Socket screw
13EN WWW.OMPHOBBY.COM
step 8
Main Blade
(M2x12mm-L4)x2
Socket screw
M1.6M1.6 Nut
(M1.6x9mm-L3)x2M1.6(M1.6)x2
M1.6 NutSocket screw
Battery
14EN WWW.OMPHOBBY.COM
step 9
Canopy
5 48 100
4 48 60
3 48 20
2 48 0
1 0 -30
5 68 100
4 68 50
3 68 0
2 68 -50
1 68 -100
5 78 100
4 78 50
3 78 0
2 78 -50
1 78 -100
IDLE 2General Flight Model IDLE 1 Model IDLE 1 Model
Throttle Screw Pitch Throttle Screw Pitch Throttle Screw Pitch
Flight Parameter Setting lntroduction
15EN WWW.OMPHOBBY.COM
:
:
OSHM1001
Spare parts picture-1 -1
Model:+PE
Package: Hang tag +PE bagOSHM1001
Product name: Metal Main Rotor Housing set :
:
OSHM1002Model:
+PEPackage: Hang tag +PE bagOSHM1002
Product name::
:
OSHM1003Model:
+PEPackage: Hang tag +PE bagOSHM1003
Product name::
:
OSHM1004Model:
+PEPackage: Hang tag +PE bagOSHM1004
Product name:
: OSHM1005Model:
+PEPackage: Hang tag +PE bagOSHM1005
: OSHM1006Model:
+PEPackage: Hang tag +PE bagOSHM1006
: OSHM1007Model:
+PEPackage: Hang tag +PE bagOSHM1007
: OSHM1008Model:
+PEPackage: Hang tag +PE bagOSHM1008
: OSHM1009Model:
+PEPackage: Hang tag +PE bagOSHM1009
: OSHM1010Model:
+PEPackage: Hang tag +PE bagOSHM1010
: OSHM1011Model:
+PEPackage: Hang tag +PE bagOSHM1011
: OSHM1012Model:
+PEPackage: Hang tag +PE bagOSHM1012
: OSHM1013Model:
+PEPackage: Hang tag +PE bagOSHM1013
:
:
OSHM1014Model:
+PEPackage: Hang tag +PE bagOSHM1014
Product name: Servo Linkage Rod Set : OSHM1015
Model:+PE
Package: Hang tag +PE bagOSHM1015: OSHM1016
Model:+PE
Package: Hang tag +PE bagOSHM1016
: OSHM1017Model:
+PEPackage: Hang tag +PE bagOSHM1017
: OSHM1018Model:
+PEPackage: Hang tag +PE bagOSHM1018
: OSHM1019Model:
+PEPackage: Hang tag +PE bagOSHM1019
: OSHM1020Model:
+PEPackage: Hang tag +PE bagOSHM1020
Feathering shaft set Plastics Main Rotor Holder set Main Rotor Holder Screw group
Bearing-MR63ZZ
M1.6x5mm
M1.4X2Socket screw
M1.6*9
M1.6
Product name: Gross Shaft Suspension Set: :
Product name: Servo Mount set --:
Product name: Main Motor Mount Set (Charm Orange) :
Product name: Metal Main Rotor Housing set
:Product name: FBL Pros and Cons linkage rod
:Product name: Main pitch control arm screw set
:Product name: Copper set of main pitch control arm
:Product name: Swash plate set
-- +:Product name: Servo Set
-:Product name: Tail Screw Set(black)
:Product name: Vertical Rotor Set
:Product name: Tail Boom Set
:Product name: Body side panel group
:Product name: Croduct Phase Panel Set
:Product name: Canopy Fixed Bolt Set
16EN WWW.OMPHOBBY.COM
-682zz
--
:
:
OSHM1021Model:
+PEPackage: Hang tag +PE bagOSHM1021
Product name: Bearing Set(682zz):
:
OSHM1022Model:
+PEPackage: Hang tag +PE bagOSHM1022
Product name: Main chuck gasket set
: OSHM1024Model:
+PEPackage: Hang tag +PE bagOSHM1024
: OSHM1025Model:
+PEPackage: Hang tag +PE bagOSHM1025
: OSHM1026Model:
+PEPackage: Hang tag +PE bagOSHM1026
: OSHM1027Model:
+PEPackage: Hang tag +PE bagOSHM1027
: OSHM1028Model:
+PEPackage: Hang tag +PE bagOSHM1028
: OSHM1029Model:
+PEPackage: Hang tag +PE bagOSHM1029
: OSHM1030Model:
+PEPackage: Hang tag +PE bagOSHM1030
: OSHM1031Model:
+PEPackage: Hang tag +PE bagOSHM1031
: OSHM1035Model:
+PEPackage: Hang tag +PE bagOSHM1035
: OSHM1034Model:
+PEPackage: Hang tag +PE bagOSHM1034
: OSHM1033Model:
+PEPackage: Hang tag +PE bagOSHM1033
: OSHM1032Model:
+PEPackage: Hang tag +PE bagOSHM1032
: OSHM1036Model:
+PEPackage: Hang tag +PE bagOSHM1036
: OSHM1037Model:
+PEPackage: Hang tag +PE bagOSHM1037
: OSHM1038Model:
+PEPackage: Hang tag +PE bagOSHM1038
:
:
OSHM1039Model:
+PEPackage: Hang tag +PE bagOSHM1039
Product name: Canopy Set(Charm Orange)
M1.6x3=31.4x3=1 M1.4=1
M1.4x8-L3=2
M1.4x6-L2=1
ST1.4x6=8M1.4x3=6
ST1.4x4=6
M1.6x9-L3=2
M1.6=2M1.6x4=6
M1.6x5=3
M1.6x3mm
Socket screw
: :OSHM1023
Model:
+PE
Package: Hang tag +PE bagOSHM1023 Product name: Screw Kit Set
:Product name: Lithium Battery Set Product name: Flight Control
: -( ):Product name: Main Motor Set(Orange)
-( )
-( )
Product name::
Product name::
Main Motor Set(purple)
Main Motor Set(Racing Yellow) -( ):
Product name: Tail Motor Set(Orange) -( )
Product name::
Tail Motor Set(purple) -( )
Product name::
Tail Motor Set(Racing Yellow)
125 -( ):Product name: 125mm Main Blades(Orange)-(Hard)
125 -( ):Product name: 125mm Main Blades(Purple)-(Hard)
125 -( ):Product name: 125mm Main Blades(Racing Yellow)-(Hard)
125 -( ):Product name: 125mm Main Blades(Orange)-(Soft)
125 -( ):Product name: 125mm Main Blades(purple)-(Soft)
125 -( ):Product name: 125mm Main Blades(Racing Yellow)-(Soft)
--:Product name: Canopy Set(purple)
Spare parts picture-2 -2
M1.6x3mm
Socket screw
M1.6x3mm
Socket screw
ST1.4x4=4
1.4x2=3
17EN WWW.OMPHOBBY.COM
step 11
: OSHM1040Model:
+PEPackage: Hang tag +PE bagOSHM1040
: OSHM1041Model:
+PEPackage: Hang tag +PE bagOSHM1041
: OSHM1042Model:
+PEPackage: Hang tag +PE bagOSHM1042
: OSHM1043Model:
+PEPackage: Hang tag +PE bagOSHM1043
--:Product name: Canopy Set(Racing Yellow)
-( )Product name:
:Landing Skids Set(Racing Yellow)
-( )Product name:
:Landing Skids Set(purple)
-( )Product name:
:Landing Skids Set(Charm Orange)
: OSHM1044Model:
+PEPackage: Hang tag +PE bagOSHM1044
-- +:Product name: Servo Set(metal housing + metal gear)
: OSHM1045Model:
+PEPackage: Hang tag +PE bagOSHM1045
--:Product name: Main Motor Mount Set--(Racing Yellow)
: OSHM1046Model:
+PEPackage: Hang tag +PE bagOSHM1046
--:Product name: Main Motor Mount Set --(Purple)
: OSHM1047Model:
+PEPackage: Hang tag +PE bagOSHM1047
-- FUTABA S-BUS:Product name: ????????????????
: OSHM1048Model:
+PEPackage: Hang tag +PE bagOSHM1048
:Product name:
: OSHM1049Model:
+PEPackage: Hang tag +PE bagOSHM1049
-10A:Product name: ESC-10A
--?????????
S-BUS
: OSHM1050Model:
+PEPackage: Hang tag +PE bagOSHM1050
:Product name:
: OSHM1051Model:
+PEPackage: Hang tag +PE bagOSHM1051
0.3:Product name: Slotted screwdriver
1.0Hexagon screw driver
: OSHM1052Model:
+PEPackage: Hang tag +PE bagOSHM1052
:Product name: Main wing support frame
18EN WWW.OMPHOBBY.COM
Memo
www.omphobby.comZhuhai edge smart dirve technology Co., Ltd