1

PART# DESCRIPTION 56” [ ] 68” [ ] 80” [ ] ITEmS

SS_B117 5/16” X 1” AllEN BuTTON hEAD 16 16 16

SS-B251 1/4” X 1/2” AllEN CylINDER hEAD 16 16 16

SS-B168 1 3/4” X 5/16” AllEN COuNTER SuNk BOlT 10 12 14

SS-N005 5/16” NylON NuT 16 16 16

SS-w008 5/16” X 3/4” wAShER 8 8 8

SS-w010 5/16” X 1” wAShER 8 8 8

l101 lADDER ADAPTOR 1 4 4 4

l102 lADDER ADAPTOR 2 4 4 4

l103 lADDER ADAPTOR 3 4 4 4

l101,l111,l121 lADDER lEfT 1 1 1

l102,l112,l122 lADDER RIghT 1 1 1

l201 lADDER STEPS 5 6 7

Z555 RuBBER ENDCAPS 2”X1” 4 4 4

gl001 gASkET (lADDER ADAPTOR 1 ) 4 4 4

INSTRUCTION MANUALINSTRUCTION MANUAL

Universal Ladder with Angled

Required Tools

Power Tool with 5/16” drill bit

wrench

items not drawn to scale

Packaged by Date

L001 56” Angled Ladder Dodge, Ford All Years, Chevy up till 95, GMC up till 95, Transit Connect

L002 68” Angled Ladder with Hooks Chevy 1996-On, GMC 1996-On

L003 68” Angled Ladder Freightliner, Dodge or Mercedes Sprinter & Nissan NV Low Tops

L004 80” Angled Ladder Freightliner, Dodge or Mercedes Sprinter & Nissan NV High Tops

Allen Tool

2

Repeat all steps 4 times for the 4 ladder mounts. Do not completely tighten bolts so adjustments can be made later on.

Do not completely tighten bolts so adjustments can be made later on.

B168

3

Use a 5/16” drill bit

w010N005

w010

B117

gl001

Z555ExteriorInterior

Position the ladder mounts onto your vehicle’s door.Depending on your curve of your vehicle you can use hole combinations to create different angles. Have 2 bolts per mount

After mounts are secured to vehicle tighten all bolts on ladder rungs and ladder mounts.

B117w008

w008

N005