instruction manual ultra hd keychain dvr, … · instruction manual ultra hd keychain dvr, 1080p...

INSTRUCTION MANUALULTRA HD Keychain DVR, 1080P

SB-WKR1400Revised: October 17th, 2013

Thank you for purchasing from SafetyBasement.com! We appreciate your business.We made this simple manual to help you enjoy your new product as quickly and easily as possible.Be sure to check the TECH SUPPORT tab on your product page at SafetyBasement.com for the latest available manual.

PRODUCT MANUAL Ultra Keychain DVR, 1080P. SB-KR1400

www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

PRODUCT REFERENCE

VITAL INFORMATION:Charging time: About 4-6 hours for a full charge. Charge overnight the first time you get it.BATTERY LIFE: About 90 minutes

MODE button

NIGHT VISION LAMP

ON/OFF, VIDEO Button

Concealment cover

Micro SD card

Camera lensNight vision LED

Indicator light

LEFT SIDE

RIGHT SIDE

USB Port



USB CableLanyard

Concealment cover

TV OUT cable

The ULTRA HD night vision keychain recorder features 1920*1080 resolution video and takes 4032*3024 resolution photos. This unit also records in the dark using the embedded IR lights in Night Vision mode. Memory capacity is about 12 minutes per 1GB of storage. Battery life runs about 90 minutes on a full charge. Package include: 1 x HD Night Vision Keychain 1 x USB Cable 1 x USB Cable with RCA Plugin 1 x Lanyard

PRODUCT MANUAL 16GB Pathfinder IR Watch : SB-WR9800



Page 4www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

BEFORE YOU START - CHARGING & TIMEYou will first need to charge your DVR and to set time. We highly recommend that you set the time stamp after charging unit, so that your recordings are accurately timed from the get go.You will need to download the time stamp from the same section where you got this manual, TECH SUPPORT tab, to get the time file. You will find the latest manual and the time.txt file.

VIBRATIONS: This unit vibrates each time a button is pressed and the command is accepted.


www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524 Page 5



SETTING TIME STAMP1. Plug in the keychain DVR into your computers USB port.2. Locate removable Disk. To to START menu > COMPUTER3. Right-click in space below DCIM and select NEW>TEXT DOCUMENT





SETTING TIME STAMP continued

change name to TIMERSET. (Note: Name must be CAPITALIZED!)

4. Open the text document and type in the current time and date. THE FORMAT MUST BE EXACT!Type in the following format:

20131015114500 Y

2013(year)10(month)15(-day)11(hour)45(minutes)00(second)(SPACE)Y(YES for time stamp to show on video)

If you dont want time stamp change the Y to N

5. After changing time, go to FILE, SAVE and close out of your text editor and other windows and unplug your device from computer.6.When you turn on your DVR the next time, the time stamp should be absorbed and updated.7. We recommend you do a test video to ensure the time stamp change was successful!





RECORDING VIDEO

(NOTE: Remove concealment cover so that you can see the indicator light while you get unit ready and see the indicator light. ) 1. Press and hold ON/OFF button for about 3 seconds and release. Light will come on, then vibrate and settle on a STEADY RED. You are now in STANDBY MODE.2. Press and release ON/OFF button again. Red light will begin to blink slowly. You are now recording video. Light will blink for the duration of video recording. You can now put back the concelament cover to hide the blinking light.3. To stop recording, press and release ON/OFF button again. Blinking light will return to steady read and the DVR will virate once to confirm your instruction. NOTE: If at any point you are not sure which mode you are in, just turn unit off (HOLD and press ON/OFF button for about 5 seconds and release), then start over!

MODE button

NIGHT VISION LAMP

ON/OFF VIDEO RECORD

Concealment cover

Indicator light

LEFT SIDE



RECORDING VIDEO WHILE PLUGGED IN

This is one of those few units that will work while plugged in to a power source. This means recording time is infinite, as long as your memory capacity is there.

There is a small step you need to take to get it into working mode while plugged in.

1. Make sure unit is turned OFF before plugging in. 2. Plug in USB to device then to computer USB port or to USB port on wall outlet 3. Right after plugging in to USB port, red indicator light will turn on and start blinking. This is the charging blinking light.4. Press and HOLD the MODE button for about 3 seconds and release. Unit will vibrate and the red light will become a STEADY RED. You are now in STANDBY MODE.5. Proceed to operate unit normally in all the modes!

TV OUT

TV OUT cable

Use the TV OUT cable as a viewer to see images being streamed live from your DVR.



TAKING PHOTOS

1. Turn unit on to standby position (steady red)2. Press MODE button once. Indicator light (and one vibration) will be steady blue3. To take one picture, jsut press the ON/OFF button. The blue light will blink ONCE and return to steady blue. You just took a picture4. Repeat as necessary4. Move away from picture mode to other modes by pressing the MODE button and getting the appropriate indicator light.

NOTE: If at any point you are not sure which mode you are in, just turn unit off (HOLD and press ON/OFF button for about 5 seconds and release), then start over!

MODE button

ON/OFF VIDEO RECORD

Indicator light STEADY BLUE while in PICTURE STANDBY MODE.

LEFT SIDE



RECORDING AUDIO ONLY

1. Turn unit on to standby mode 2. Press MODE button ONCE, THEN AGAIN. Unit will now be in a RED/BLUE standby mode (you will need to look carefully to also see the blue light. At a glance the light looks like red/or-ange)3. Press ON/OFF button once and the indicator light should blink RED/BLUE. You are now in AUDIO ONLY recording mode. 4. To stop audio recording, press ON/OFF button once. Unit will vibrate once and light will re-turn to RED/BLUE. Repeat as necessary.

MODE button

ON/OFF VIDEO RECORD

Indicator light STEADY BLUE while in PICTURE STANDBY MODE.

LEFT SIDE



RETRIEVING FILES

We recommend that you remove SD card out of device and insert it into a card reader. This will give you best upload time, since the files are really large.





Your Windows PC or Mac has built-in software that will play most of the files created by devices like yours. However, if you are having problems playing your files, or need more options, please download and try these programs.

This software is free and can be downloaded directly from the links below. You can find support and tutorials for these programs on their respective websites. SafetyBasement can not provide software support for these programs

As with ANY files you download from the internet, be sure to scan them for viruses using your particular virus scanner. While most users report no issues using this software, we can not be responsible for any damage caused by this software. Please proceed carefully. Back up your PC before installing any new software.

VIDEO PLAYBACK - VLC(http://www.videolan.org/vlc/index.html)The VLC Media Player can play almost any video or audio file type. There is a version for Windows and for Mac OS X.

VIDEO EDITING for WINDOWS - MOVIE MAKER 2012(http://windows.microsoft.com/en-US/windows/get-movie-maker-download)Movie Maker is a simple video editing program from Microsoft. Please go to this link, and choose the download for your version of Windows. Please note: Movie Maker is part of the Windows Essentials package.

VIDEO EDITING for MAC OS X - iMOVIE(Visit the Apple Mac App Store for latest version)iMovie is a simple video editing program from Apple. It comes installed with your new Mac. The latest version is also available at the Mac App Store at additional cost.

AUDIO PLAYBACK and EDITING - AUDACITY(http://audacity.sourceforge.net/)Audacity is a popular audio editing program used by amateurs and professionals to edit simple and complex audio projects. You can use Audacity to convert your audio files to another format, such as MP3. There is a version for Windows and Mac OS X.

PHOTOSYour Windows and Mac computers have the ability to do basic editing of photos built in.

SUGGESTED SOFTWARE





Audio Formats WAVAudio Encoding 128 Kbps

WAV Bit Rate Mode ConstantWAV Bit Rate 128 KbpsWAV Sampling Rate 16 Hz

DEVICE SPECIFICATIONSAu

dio

Video Format .AVICodec MJPGBit Rate 29.8 MbpsResolution 1920x1080 pixels (16:9)Frame Rate 30 fps

Audio Format PCMBit Rate Mode ConstantBit Rate 128 Kbps

Vide

o

Photo Format JPGResolution 4,032 x 3,024 pixel

Phot

o





Memory Built In 0GBMemory Expansion 2GB - 64GBBattery Type Internal Rechargeable for camera

battery is non repleaceable

Charger via USB port or included adapter

DEVICE SPECIFICATIONSD

evic

e Inf

o

Please check our site for the latest available manual for this product.

Note

s

File sizes shown are approximate.

Video (12 min) 1 GB

Audio (10 min)

Photo

File

Siz

es

instruction manual ultra hd keychain dvr, … · instruction manual ultra hd keychain dvr, 1080p...

Documents