INSTRUCTION MANUAL

LITE-WRITE LASER SHOWTM

2

WARNINGS

When using this LITE-WRITE LASER SHOWTM

, basic safety precautions should always be

followed to reduce the risk of fire, electric shock and personal injury.

Follow the instructions on the DANGER label on the LITE-WRITE LASER SHOWTM

.

The LITE-WRITE LASER SHOWTM

uses a laser light beam. Only a qualified service person

should remove the cover or attempt to service this device due to possible eye injury.

Never point the LITE-WRITE LASER SHOWTM

beam at anyone.

Never look directly into the LITE-WRITE LASER SHOWTM

beam.

Keep the LITE-WRITE LASER SHOWTM

away from children.

3

SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

WARNING: THIS IS NOT A TOY! THIS PRODUCT CONTAINS SMALL PARTS WHICH

COULD CAUSE CHOKING IF SWALLOWED.

DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. IF SERVICING IS NEEDED,

SEND TO QUALIFIED SERVICE PERSONNEL. PLEASE ADHERE TO THE FOLLOWING:

A. Read Instructions - All safety and operating instructions should be read before the item is operated. Please adhere to the instructions and warnings for your safety.

B. Heat - The item should be situated away from heat sources such as radiators, hairdryers, heat registers, stoves or other appliances that produce heat.

C. Do not let lamps rest on the supply cord or on any wire.

D. Power Sources - The item should be connected to a power supply only like the one that is provided with the item.

1) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

2) Do not hang ornaments or other objects from cord.

3) Do not close doors or windows on the product or product cords as this may damage the wire

insulation.

4) Unplug the product when leaving the house, retiring at night or if left unattended.

E. Damage Requiring Service – Refer all servicing to a qualified service personnel. Have a qualified service personnel service this item when:

1) The power-supply cord or plug has been damaged. 2) Objects have fallen. 3) All troubleshooting techniques have been tried and the item will not work or has stopped

working.

4) The item has been dropped or the enclosure damaged.

F. This product is intended for seasonal use throughout the year. It is not intended for permanent installation or use.

G. To avoid risk of fire, burns, personal injury and electrical shock, this item should not be played with or placed where small children can reach it.

H. Do not use this product for other than its intended use.

I. Do not cover the product with cloth, paper or any material not part of the product when in use.

SAVE THESE INSTRUCTIONS.

4

TABLE OF CONTENTS

1. DESCRIPTION ___________________________________________________________________ 5

2. INSTALLATION _________________________________________________________________ 5

3. OPERATION ____________________________________________________________________ 7

4. CARE INSTRUCTIONS __________________________________________________________ 11

5. SONG LIST ____________________________________________________________________ 11

6. RATINGS ______________________________________________________________________ 11

7. TROUBLESHOOTING ___________________________________________________________ 12

5

I. DESCRIPTION

Thank you for purchasing the LITE-WRITE LASER SHOWTM

. This product features innovative

new technology for seasonal decorating: an advanced laser light show plays to the music of 12

Christmas Carols and 3 other festive holiday songs for New Year’s Eve, Halloween and Birthday

celebrations. Or you can enter your own messages. The unit is designed for outdoor use. Your

LITE-WRITE LASER SHOWTM

will impress the whole neighborhood!

II. INSTALLATION

1. Gently remove the unit from the packaging. 2. Secure the unit on the included stake and / or stand according to the following diagram:

TO STAKE IN GROUND STAND FOR FLAT SURFACE

3. Push the stake to the ground, and ensure the unit is stable.

4. Adjust the angle and height of the unit to a desired projecting position by loosening, adjusting

the unit and securing the adjusting knob (See figure on following page).

5. A tripod stand is included to display the unit on a hard, flat surface. See figures above and the

following page for assembly and display instructions.

6

7

III. OPERATION

TOP OF THE UNIT

BOTTOM OF THE UNIT

8

1. Adjust the positioning of the unit on the stake or stand so that the show is aimed at your desired projection surface. Stake or place the unit on a flat surface and make sure it is 10ft – 15ft away

from the desired projection surface. Move the unit back further to expand projection or forward

to make projection smaller.

2. The adapter is intended to be correctly oriented in a vertical or floor mount position. 3. Once the unit is plugged in, press the POWER button to turn ON. When the unit turns on and

the last song was a Christmas song, the last song selected will play and then only Christmas

songs will play sequentially. When the unit turns on and the last song was either Halloween,

Happy Birthday, or Auld Lang Syne (”Happy New Year”), the unit will play that song only.

4. The unit is on an automatic 6 hour timer. When the unit is turned on, it will play for 6 hours continuously, and then turn off for 18 hours. When the unit turns back on after 18 hours, it will

start playing the last song selected as described above. If a unique message is playing when the

unit turns off, the message in the #1 saved position will play when the unit turns on.

5. To turn the unit on when it is automatically shut off after 6 hours of playing, press the power button to turn the unit on. Please note the new cycle of 6 hours on and 18 hours off will start

when the unit turns on.

6. Use the VOLUME dial to adjust the volume of the music.

9

TO PLAY PRE-PROGRAMMED SONGS / LASER SHOWS

When the unit is first turned on the screen will say “Lite-Write Laser Show”. This screen will remain for 30 seconds or touch the stylus to the screen to get to the songs or programmable

message screen (Fig. 1).

Fig. 1

The unit comes with 12 Christmas songs and 3 Holiday songs. When the unit is first turned on, it will automatically start with a Christmas song and automatically scroll through all 12

Christmas songs and keep playing sequentially.

To select a new song, open the cover at the top of the unit. The screen display is “Light Shows” (Fig. 2).

Fig 2

Using the stylus, touch the desired song name which will then be highlighted in a red box.

Or touch “Next” or “Prev” on the right hand side of the screen.

Using the stylus, press play. The songs will play continuously and sequentially until another song is selected.

If choosing to play Halloween, Auld Lang Syne (”Happy New Year”) or Happy Birthday To You, please note each individual song will repeat automatically until a new song is selected.

10

TO WRITE AND PLAY A UNIQUE MESSAGE

The unit can store 10 messages, each message has a maximum 510 letters / symbols limit. There is no music when these messages play.

Please note period (”.”) is not an option.

To input a message, use the stylus to press the “Message Laser” tab at the top middle of the screen (Fig. 3).

Fig. 3

Use “Shift” to change from lower case to upper case and “Back” to erase (Fig. 4).

Fig. 4

Type your desired message.

After the message is complete, use the stylus to touch “Go” and the message will be played.

To save a message, type out a message and press “Save” on the right hand side of the screen. The screen will automatically jump to the “Saved Message” page (Fig. 5).

Fig. 5

11

A maximum of 10 messages can be saved.

Using the stylus, select desired message position from 1 to 10 and press the “Store” button.

The messages is now saved and and will show on the screen until deleted.

To play a saved message, make sure the “Saved Message” page is showing.

Using the stylus choose your desired message and press “Load” which automatically changes to the “Message Laser” page where the message will be displayed.

Press the “GO” button to play the message.

To delete a message, go to the “Saved Message” page and highlight the message. Press “Delete”.

IV. CARE INSTRUCTIONS

1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation cords, cracks in enclosure, loose connections or exposed wire.

2. When storing the product, carefully remove the product from the current location, including trees, branches or bushes to avoid any undue strain or stress on the conductors, connections and

wires.

3. When not in use, store neatly in a cool, dry location protected from sunlight and heat. 4. If necessary, clean product by wiping with a soft, dry cloth.

V. SONG LIST

1. Jingle Bells

2. O Christmas Tree

3. We Wish You a Merry Christmas

4. Jolly Old St. Nicholas

5. Dance of the Sugar Plum Fairy

6. Here We Come A-Caroling

7. O Little Town of Bethlehem

8. Hark! The Herald Angels Sing

9. Deck the Halls

10. Joy to the World

11. Here Comes Santa Claus

12. Let it Snow

13. Halloween Collage

14. Auld Lang Syne (”Happy New Year”)

15. Happy Birthday To You

VI. RATINGS

Electrical Rating:

AC 120V ~ 60Hz, 12 Watts Max.

Laser Output Rating:

Wavelength - 532nm, Output Power < 5mW

Normal operation temperature from -20ºC to 35ºC or -4ºF to 95ºF

This product has a built-in over heat protection device to protect the Laser diode from damaging during

high temperature conditions. The Laser will automatically cut off while it is over heated and

12

automatically turn on after 15 to 30 minutes of self cooling. When the unit turns on it will play the last

song it was playing before turning off and resume where it was during the timer cycle.

This product has a built-in warming device to help the unit start during extreme cold conditions.

Always leave the unit plugged in when left outside in the cold as this activates the warming device.

VII. TROUBLESHOOTING

Problem Likely Cause Solution

No laser image

No power. Make sure the main power cord is plugged into a

working outlet.

Unit needs to be reset. Turn

main power OFF, then ON.

Please note the new cycle of 6

hours and 18 hours off will

start when the unit turns on.

Turn main power OFF, then ON.

Projection surface is too dark

or there is too much ambient

light.

Effect is best achieved at night on a light

projection surface.

Laser is aimed incorrectly. Re-adjust the unit so that it faces the projection

surface.

Cold conditions. Please allow the unit to warm up between 1 to 20

minutes.

Hot conditions. Over heat protection device activated. Unit will

turn on after 15 to 30 minutes of self-cooling.

Unit is tilting

downward without

user interaction

Unit is loose on ground stake

or stand.

Adjust the unit to desired position and tighten the

adjust knob to secure.

Pre-programmed

holiday song not

playing

Holiday song not selected. In the ”Light Shows” screen, select the desired

song.

Pre-programmed

Christmas song

not playing

Christmas song not selected.

In the ”Light Shows” screen, select the desired

song. Christmas songs will keep playing

sequentially.

Your unique

message is not 1. Not on right screen. 1. Press the ”Message Laser” tab at the top

13

playing 2. Did not press ”GO”.

3. The message in the #1 position in the ”Saved

Message” screen always

plays when the unit

automatically turns on after

being off for 18 hours.

middle of the screen.

2. Press ”GO” on the top right of the screen.

3. Use the stylus to select the desired message.

Your unique

message is not

being saved

1. Not on right screen.

2. Message not stored properly.

1. Press ”Save” on the top right of the ”Message

Laser” screen. The screen will automatically jump to

the ”Saved Message” page.

2. Select the desired position from 1 to 10 and press

the ”Store” button.

Your unique

saved message is

not being played

1. Not on right screen.

2. Did not press the ”Load” button.

1. Make sure you are on the ”Saved Message”

page. Press the tab at the top right of the main

screen.

2. Press the ”Load” button and the screen will

automatically change to the ”Message Laser”

page. Press the ”GO” button to play the message.

CAN ICES-3 (B)/NMB-3(B)

ACTUAL PRODUCT MAY VARY SLIGHTLY FROM PHOTOGRAPHS / DRAWINGS IN THE INSTRUCTION MANUAL

20170426 (v.1)

LITE-WRITE LASER SHOWTM

Mr. Christmas Inc.

5841 East Shelby Drive

Memphis, TN 38141

Made in China

Mr. Christmas Ltd. / Mr. Christmas Inc.

http://www.mrchristmas.com