instruction for small solar home system
TRANSCRIPT
8/6/2019 Instruction for Small Solar Home System
http://slidepdf.com/reader/full/instruction-for-small-solar-home-system 1/10
Instruction for small Solar Home System
MODEL:SBR-H050
SBR-H120
SBR-H160
***************************************************
8/6/2019 Instruction for Small Solar Home System
http://slidepdf.com/reader/full/instruction-for-small-solar-home-system 2/10
Dear User:
Thank you for using the Solar Home System! Before using this product, pleaseread this manual carefully
***************************************************
Product introduction
Solar Home System is developed by the green energy power supplysystem which aimed at small and medium family or unit that uses crystalline
silicon solar panels convert sunlight into electrical energy which stored in
batteries, converting DC or AC according to the user's actual electricity
demand, it meets a variety of electrical demand.
Solar Home System has characteristics of clean and green, stable and durable,
easy to install and fashionable appearance, such as:
Integrated function, and be able to display system charging, power, and
load condition.
With over-current protection to protect your electrical equipment and
systems security.
With charging overvoltage and undervoltage protection, to ensure the
system operation stability and reliability
DC output,to meet a variety of electricity needs.
The system carton surface using condensate-based Plastic Spray
treatment, beautiful and durable.
solar power system consists of solar modules and power supply controller
of two parts, eaay to replace
8/6/2019 Instruction for Small Solar Home System
http://slidepdf.com/reader/full/instruction-for-small-solar-home-system 3/10
Function and load requirements
System
Model parameters
Main
configuration Workload
Voltage:12V/DCSolar panels:
120Wp9W*3 DC
energy-saving
lamps(DC12V)8h/d
Continuous working
time: 2days
SBR-H050 Current: 3A Battery:12V/80Ah
Output power:
50W
Voltage:220V/AC
Solar panels:
140*2Wp
14″Color TV
(60W) Continuous
working 6h/d
SBR-H120 Current: 0.5A
Battery:
12V/200Ah
11W*3 DC
energy-saving lamps
8h/d
`
Output power:
200W
Continuous working
time: 2days
Voltage:220V/AC
Solar panels:
180*2Wp
14″Color TV (60W)
Continuous working
6h/days
SBR-H160 Current: 0.68A
Battery:
24V/150Ah*2
11W*3 DC
energy-saving lamps8h/d
Output power:
250W
DVD(35W) 6h/d
Continuous working
time: 2d
8/6/2019 Instruction for Small Solar Home System
http://slidepdf.com/reader/full/instruction-for-small-solar-home-system 4/10
Attention! The output power of external equipment can not larger than
the system output power, otherwise it will switch on the system to
over-current protection, cutting off the power output Automatically.
Installation and WiringSolar Home System consists of electrical box and Solar panels,connecting
with cables.
electrical box should be indoor placed,avoid from rain,needs a dry
surrounding environment, do not place the system product in a wet
surrounding environment , it flings off a little of heat , please keep
well-ventilated。
Installing solar panel outside,dead against the direction of sun,change the
orientation of the solar panel manually,keep it is thelargest generating
capacity.
Connecting solar panels
Solar panel and electrical box is connecting by cable,connector is right
side to the electrical box.
8/6/2019 Instruction for Small Solar Home System
http://slidepdf.com/reader/full/instruction-for-small-solar-home-system 5/10
Attention!If user need to replace the solar panel or connector,please
make sure to clear interface pin Polarity: Red: +, blue: -, do not make it
reverse, or it might damage the equipment.
Install the DC load
SBR-H050 SBR-H120 DC devices should be directly inserted into
2-pin socket to the right side of electrical box, the upper part of the needle
1 is "12VDC +", the bottom part of the needle 2 is "12VDC-".
SBR-H160 the bottom part of the needle 2 is "24VDC-"
8/6/2019 Instruction for Small Solar Home System
http://slidepdf.com/reader/full/instruction-for-small-solar-home-system 6/10
-太阳能板 输入 -
- Solar array input -
-直流 输出 -
- DC Loads output -
-交流 输出 -
- AC Loads output -
-输出 开关 -
- Output switch -
-蓄电池 开关 -
- Battery switch -
Attention! If user need to conntect DC device,it would make your own
connecting cable(connector is in the accessories),make sure to clear
interface pin Polarity: 1: +, 2: -, do not make it reverse, or it might damage
the equipment.
System startup
Solar array input
2:-1:+
安全插口保护
-太阳能板 输入 -
- Solar array input -
熔断丝盒
Connecting solar panels, electrical boxes and electrical load, open the
electrical box back door, as well as inserting the 10A fuse into the fuse wire
seat, connecting battery to power system (the battery should be disconnected
with the system in the transport or long-term circumstances,). after checking
the polarity is correct and the solar panel input and DC output load(if the
equipment is original equipment, inspection step can be avoided).
8/6/2019 Instruction for Small Solar Home System
http://slidepdf.com/reader/full/instruction-for-small-solar-home-system 7/10
When battery connected to the power system, you can see a first red indicator
light to show battery status on the the electrical box on front panel, the
indicator lights eliminate when battery power is insufficient.If the battery voltage is normal, indicator light constant light, you can press the
green button on the right side, load power, startup complete.
When the solar modules is installed properly, the middle of the red light
flashes when charging, the power is full while the light constant shine, the
indicator light off when the component voltage is insufficient or stopping
charging at night.
DC load output
-直流 输出 -
- DC Loads output -
1:+2:-
安全插口保护
`
System Model connector Number Voltage level
Solar input 1 DC
SBR-H050 DC output 2 DC12V
AC output NA NA
Solar input 1 DC
SBR-H120 DC output 2 DC12V
AC output 2 AC220V
Solar input 1 DC
SBR-H160 直流输出 2 DC24V
AC output 2 AC220V
8/6/2019 Instruction for Small Solar Home System
http://slidepdf.com/reader/full/instruction-for-small-solar-home-system 8/10
AC load output 220V 50HZ
N
G
L
-交流 输出 -
- AC Loads output -
Attention!Swith on the battery in advance when start the system, waiting
for passing the self-test,then swith on the load.If it is out of order,
there may not pass the system self-test, resulting in no output
load.
Display function
The indication lights of the front electrical box could display the power
capacity and the status of charging, specific as follows:
8/6/2019 Instruction for Small Solar Home System
http://slidepdf.com/reader/full/instruction-for-small-solar-home-system 9/10
“Battery”Indication light
Normal operation, the indication light lighting up.
Power insufficient,the indication light dead.
“Charge” Indication light
Inadequate voltage or open circuit of solar panels,the indication light dead.
Solar panel in charging,indication light flashing.
Solar panel in full charge,the indication light lighting up.
“Load”Switch
Pressed,load output
Released,load switch off
Operation suggestion
The system is running under a slight heat, keep the environment ventilation.
Normal use requires no special maintenance and repairing, it only needs to
maintain electrical boxes clean. It is very important that the battery is full
charge, once a month at least,or the battery will be permanent damage, the
battery could be full charged only when the energy into the battery in more
than the energy gained by the load. Keep this in mind, especially adding the
extra load
Batteries store a lot of energy, in any case mustn’t let battery short circuit,
so when replacing the solar panels, or DC load plug, make sure to confirm theplug polarity to avoid short circuit.
Technical Parameter
System Model SBR-H050 SBR-H120 SBR-H160
Voltage level 12V 12V 24V
Strong charge level 14.5V 14.5V 29V
8/6/2019 Instruction for Small Solar Home System
http://slidepdf.com/reader/full/instruction-for-small-solar-home-system 10/10
Float Voltage level 13.7V 13.7V 27.4V
Load cut off voltage 11.5V 11.4-11.9V 22.8-23.8V
Load reopen voltage 12.5V 12.8V 25.6V
Temperature Compensation -4 mV/cell*K -4 mV/cell*K -4 mV/cell*K
Maximum charge current 8A 10A 10A
Maximum load current 8A 10A 10A
Size 620*360*230 790*360*300 790*660*230
Weight <40kg <80kg <120kg
No-load Current 4mA 4mA 4mA
Operating temperature
range -40到+50℃ -40到+50℃ -40到+50℃
Protection Level IP 22 IP 22 IP 22