installing the lca classic on windows

8/3/2019 Installing the LCA Classic on Windows

1/27

Installing the LCA Classic on Windows

The code unload procedure inUnloading Your Product Code on Windows walked you through the installation of the ENOVIA

client, the LCA Classic.

You can install an LCA Classic on the same machine or on a different workstation from the server and which does not contain

any server code.

The screen captures in this section illustrate the case where the LCA Classic is installed on a different machine from the server.

If you install the client on the same machine as the server, the dialogue will be the same as for installing an additional product.

To be able to start the client after the installation:

Orbix must be running on the server machine the database must be running on the server machine.

If Orbix is not running, run the following command:

WindowsInstallPath\intel_a\code\bin\runOrbix

Installing the LCA Classic Client1. Log on as an administrator.

You must belong to the Administrators group, or have the privileges assigned to the Administrators group. Otherwise,

you will not be able to start the installation.

2. Insert the CD-ROM into the drive.The Welcome dialog box is then displayed on a background window. Note that the screenshots illustrating the installation

procedure were taken without the background window:
http://www.maruf.ca/files/catiahelp/basil_C2/basilUnloadCodeWindows.htmhttp://www.maruf.ca/files/catiahelp/basil_C2/basilUnloadCodeWindows.htmhttp://www.maruf.ca/files/catiahelp/basil_C2/basilUnloadCodeWindows.htm


2/27

3. Click the Next button to move to the next step.The Choose Destination Location dialog box appears. A default destination folder is already proposed:

WindowsInstallPath


3/27

4. If the default destination folder is suitable, click the Next button to move to the next step, or click the Browse... buttonand navigate to select another folder and click OK.

The folder you choose must be empty. You can also specify a new folder: if the folder does not exist, you will be

prompted to specify that you want the folder to be created, in which case you must click the Yes button to create the

folder.

Installing Several Identical Releases in Different Locations on the Same Computer

Providing you have enough disk space, you can now install several identical releases in different locations on the same

computer.

For example, you may want to install the same VersionNumber GA release in two places. Your first installation could

be, for example, the production version. Then, once a VersionNumber service pack becomes available, you could apply


4/27

it to the second installation which would then become the test version, enabling you to test it before it becomes the

official production version.

Furthermore, the different releases you can install can belong either to the same product line, or to different product lines.

For example, you could install CATIA VersionNumber and DELMIA VersionNumber in different locations.

To install another identical release, when you reach the Choose Destination Location dialog box, this time click the

Browse... button, specify the new destination folder, then click OK. You will be prompted to create the folder if it does

not already exist, so click Yes.

ClickNext to display the dialog box entitled Enter Ident for your new installation:

Enter an identifier which will enable you to identify all the components of your new installation. The string must contain

uppercase characters or numbers, and must not exceed 20 characters.


5/27

The identifier for your new installation is preceded by an underscore and is visible:

o in the installation patho in the environment nameo

in the appropriate registry entries

o in the Start->Programs->MyProductLine menu, and new entries for the corresponding tools are created in theStart->Programs->MyProductLine->Tools menu

o in the Add/Remove Programs control.If identical releases belonging to the same product line are installed, the OLE behavior is the same for both. However, if

the installations involve different product lines, the OLE behavior registered for the last installation takes priority.

5. Click the Next button to move to the next step.The Choose Environment Location dialog box appears:


6/27

A default destination folder is already proposed:

C:\Documents and Settings\All Users\Application Data\DassaultSystemes\CATEnv

6. If the default folder is suitable, click the Next button to move to the next step, or click the Browse... button and navigateto select another folder and clickOK.


7/27

The folder you choose must be empty. You can also specify a new folder: if the folder does not exist, you will be

prompted to specify that you want the folder to be created, in which case you must click the Yes button to create the

folder.

For more about environment files, refer toAbout the Environment Created on Your Computer on Windows.

7. Click the Next button to move to the next step.The Setup Type dialog box appears:
http://www.maruf.ca/files/catiahelp/basil_C2/basilgs12.htmhttp://www.maruf.ca/files/catiahelp/basil_C2/basilgs12.htmhttp://www.maruf.ca/files/catiahelp/basil_C2/basilgs12.htmhttp://www.maruf.ca/files/catiahelp/basil_C2/basilgs12.htm


8/27

This dialog box lets you specify whether you want to install all of the software on the CD-ROM, or select the

configurations and/or products to be installed:

o Complete: specifies you want to install all the software, and moves on to the next installation step (installation ofonline documentation files) when you click Next

o Custom: lets you choose the configurations and/or products to be installed.8. If you want to choose which configurations and/or products to install, check the Custom option and click the Next button

to move to the next step.

The Install Language-Specific Files and Fonts dialog box appears:


9/27

Check the buttons to install the user interface files for the appropriate language(s) and/or to install language-indexed

fonts. Uncheck the buttons for the language files you do not want to install. This will let you skip the installation of

unnecessary language files and fonts and enable you to save disk space.

Note that the choice you make at installation is definitive: you cannot add or remove languages or fonts later when

installing additional configurations and/or products.

9. Click the Next button to move to the next step.The Select Software dialog box appears:


10/27

10.In the Choose from: list, select PRODUCTS:


11/27

11.Select VPC - ENOVIA Client Product.The VPC - ENOVIA Client Product is indicated in the Selected Configurations and Products list:


12/27

12.Click the Next button to move to the next step.If you chose a complete installation, or a custom installation and chose all the configurations in the list, the CATIA V5 -

ENOVIAV5VPM Interoperability Information dialog box appears:


13/27

13.If you already installed CATIA V5, check the I want to enter CATIA V5 Information button to enter informationabout your CATIA V5 installation:


14/27

14.Enter the CATIA V5 installation path, environment file folder, and environment file name.15.Click the Next button to move to the next step.

If your configuration requires you to configure Orbix, the Choose Orbix Configuration dialog box appears:


15/27

Leave the default values as is for Orbix.

The installation procedure checks that the administrator performing the installation has the correct privileges required for

running Orbix and the server manager. Note that the option "Add required privileges for current user" is grayed out,

which means that the privileges are correct. If the privileges are not correct, the option will be accessible. Check the

option before proceeding with the installation to add the required privileges to the administrator user performing the

installation. If not, the installation will fail.

16.Click the Next button to move to the next step.The Server Timeout Configuration dialog box is displayed:


16/27

Set the timeout value as described inServer Timeout.

17.Click the Next button to move to the next step.The Choose Communications Ports dialog box is displayed:
http://www.maruf.ca/files/catiahelp/basil_C2/basilUnloadCodeWindows.htm#hj-ServerTimeouthttp://www.maruf.ca/files/catiahelp/basil_C2/basilUnloadCodeWindows.htm#hj-ServerTimeouthttp://www.maruf.ca/files/catiahelp/basil_C2/basilUnloadCodeWindows.htm#hj-ServerTimeouthttp://www.maruf.ca/files/catiahelp/basil_C2/basilUnloadCodeWindows.htm#hj-ServerTimeout


17/27

This allows you to set up on your computer:

o a port reserved for the communications backbone processo a port reserved for starting the communications backbone process automaticallyo a port reserved for processing events when using peripheral devices (spaceball, spacemouse, joystick).

By default, the "Set up communication ports" option is checked because it is strongly recommended.

A backbone daemon is created as a service and started. You can monitor the daemon by selecting Start->Control

Panel->Administrative Tools->Services. The name of the service is Backbone Service. The name of the

executable program that corresponds to the backbone service is CATSysDemon.exe, which you can track using the Task

Manager.

This installation step adds three lines to a system file. For more information about the communications backbone and


18/27

which file is concerned, refer toCommunications Backbone Files.

In previous releases, the Choose Communications Ports dialog box always appeared. Now, the installation setup analyses

the file in question. If the three lines are present (for example, due to a previous installation), the dialog box will not

appear.

Furthermore, if the backbone service is already running, it is stopped then restarted. You can check which services are

running by selecting the Start->Control Panel command and selecting the Services control.

18.Click the Next button to move to the next step.The Vault Client Configuration dialog box is displayed:

When installing a product which contains a potential vault client, this dialog box prompts you to indicate if you want to
http://www.maruf.ca/files/catiahelp/basil_C2/basilgs12.htm#hj-Backbone2http://www.maruf.ca/files/catiahelp/basil_C2/basilgs12.htm#hj-Backbone2http://www.maruf.ca/files/catiahelp/basil_C2/basilgs12.htm#hj-Backbone2http://www.maruf.ca/files/catiahelp/basil_C2/basilgs12.htm#hj-Backbone2


19/27

configure a vault client at the end of the enoviadbsetup process.

If you choose to configure a vault client, another dialog box will be displayed at the end of the installation, allowing you

to enter the parameters of the vault server(s) you want to catalog: vault name, machine name, orbix port and orbix service

name. This information is added in the VaultClient.properties file.

After installation, you can run the VaultClientSetup command, in order to catalog another vault server, modify the

parameters of an existing one, or remove an existing one.

The VaultClientSetupB command provides the same functionalities in batch mode.

19.Check the appropriate option if you want to set up the vault client at the end of the installation.20.

Click the Next button to move to the next step.

The Data directories selection dialog box appears. In the Please Enter Java Home Path field, enter the

complete Java runtime path:


20/27


21/27

This dialog box gives you the choice whether to create:

o a startup icon on the desktopo a startup shortcut in the Start menuo entries in the Start menu for the administration tools.

Not installing the desktop shortcuts allows you to minimize the number of registry entries during the installation.

Check the appropriate options.

22.Click the Next button to move to the next step.The Select ENOVIAV5VPMVersionNumber Documentation dialog box appears:


22/27

23.Check the I want to install Online Documentation check box only if you want to install the onlinedocumentation: this choice is optional.

If you check this box, you will be prompted later on in the installation (after the software has been copied to your

computer) to remove the code CD-ROM and insert the first documentation CD-ROM.

24.Clicking the Next button displays the Start Copying Files dialog box.The central area lists the current settings you set in the previous steps:

o the product names and documentationo destination folder.


23/27

25.Click the Install button to start copying the files to your computer.26.If you indicated earlier that you want to set up a vault client, the Vault Client Setup dialog box appears:


24/27

You are prompted to enter the parameters of the vault server(s) you want to catalog: vault name, machine name, orbix

port and orbix service name. This information is added to the VaultClient.properties file.

27.Click the Add... button to display the following dialog box:


25/27

28.Specify the Alias name, server hostname and Orbix daemon port, then clickOK.The Vault Client Setup dialog box is now updated like this:


26/27

29.Use the Modify... and Delete buttons to modify or delete the selected configuration.30.Click the Close button to continue.

Once the files have been installed, the Setup Complete dialog box appears:


27/27

31.Click the Finish button to end the installation.