- 1 -

INSTALLATION INSTRUCTIONS

SA

VE

F

OR

F

UT

UR

E

US

E

Product names listed herein are trademarks of AS America, Inc.© AS America, Inc. 2016 770155-100 Rev. D (6/17)

RECOMMENDED TOOLS AND MATERIALSMost of the procedures require the use of common tools and materials, which are available from hardware and plumbing supply stores. It is essential that the tools and materials be on hand before work is begun.

ROUGHING-IN DIMENSIONS: FITZGERALD CONSOLE• For reference

Thank you for selecting DXV. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!NOTE: Pictures may not exactly define contour of china and components.

!

Fitzgerald® Console Lavatory KitModel D21410

Oak Hill™ Console Lavatory KitModel D21411

In the United States:DXVOne Centennial Avenue Piscataway, New Jersey 08855Attention: Director of Customer Care

For residents of the United States, warranty information may also be obtained by calling the following toll free number: (800) 227-2734www.DXV.com

In Canada:DXV 5900 Avebury Road Mississauga, Ontario L5R 3M3Canada

Toll Free: 1-800-387-0369Local: 905-306-1093Fax: 1-800-395-1498www.DXV.ca

In Mexico:DXV Via Morelos 330Col. Santa Clara Coatitla Ecatepec, Estado de México 55540

Toll Free: 01-800-8391200www.DXV.mx

8"(203 mm)

28"(711 mm)

20-1/8"(511 mm)

7-7/8"(200 mm)

3"(75 mm)

12-5/16"(313 mm)22"

(559 mm)

6-1/8"(155 mm)

FINISHEDWALL

NOTE: Locate supplies and “P” trap in open area.

8"(203 mm)

9"(228 mm)

FINISHEDFLOOR

35-1/4"(895 mm)

24-5/8"(626 mm)

25"(634 mm)

7-1/2"(190 mm)

4"(100 mm)

20"(508 mm)

32"(815 mm)

18"(457 mm)

22"(559 mm)

35-1/4"(895 mm)

25"(634 mm)

Adjustable Wrench

Regular Screwdriver

Phillips Screwdriver

10'

Putty Knife

DrillSaber SawPlumbers' Putty or

Caulking

Tape MeasureLevel

Basin Wrench

Channel LockPipe Wrench

Hacksaw

Tubing Cutter

- 2 -

EXPLODED VIEW - FITZGERALD CONSOLE

770155-100 Rev. D (6/17)

1

2

46B

6H

6D

6G

35

6C

6A

6EITEM # DESCRIPTION PART NUMBER

1 Stabilizing Frame

2 Vertical Support Tube

3 Horizontal Support Tube

4 Vertical Support Tube

5 Horizontal Support Tube

6A (1) - Ball Joint 770144-201.YYY0A

6B (1) - Ball Joint Connector 770145-201.YYY0A

6C (1) - Foot Ferrules 770146-201.YYY0A

6 Hardware/Mounting Kit 6D (2) - Wall Escutcheons6E (2) - Wall Bracket Attachment6G (8) - Screws

(head Ø 7.4mm x 32.8mm, phillips flat head)6H (8) - Wall Anchors

770226-201.YYY0A

ROUGHING-IN DIMENSIONS: OAK HILL CONSOLE• For reference

FINISHEDFLOOR

26-15/16"(684 mm)

8"(203 mm)

18"(457 mm)

6"(152 mm)

11"(280 mm)

4"(102 mm)

13"(330 mm)

22"(559 mm)

4-7/8"(124 mm)

23-1/2"(597 mm)

26"(662 mm)

15-3/4"(400 mm)

30"(762 mm)

FINISHEDFLOOR

FINISHEDWALL

20-1/2"(520 mm)

30"

(763

mm

)

36"

(915

mm

)

38-3

/4"

(985

mm

)

30-5

/8"

(778

mm

)

39-3

/16"

(995

mm

)

41-1

/16"

(104

3 m

m)

31-1

/8"

(791

mm

)

23-9/16"(599 mm)

- 3 -

1

2

4a

3

4b 5

CONSOLE STAND INSTALLATION

FOR FITZGERALD CONSOLE FOR OAK HILL CONSOLE

EXPLODED VIEW - OAK HILL CONSOLE

Suitable reinforcement is required for anchoring the lavatory to the wall. Determine horizontal centerline location “*” of lavatory mounting holes. (see Figure 1).

Rough in supply lines and waste per rough in dimensions.

* For Oak Hill Console: It must have cross beam for fastening the stablizing frame.

Refer to exploded view. Set aside items 6E through 6H. Assemble console stand using items 1 through 5 and 6A through 6D.

Level stabilizing frame item 1. Mark position of brackets (item 6E). Attach brackets to wall using items 6G & 6H.

Note: Remove & re-install stabilizing frame (item 1) if necessary.

Move the metal stand into place. Attach center rails of console to wall using items 6G thru 6H. The glides can be adjusted, but it is recommended not to exceed 1/2" if possible.

Level stabilizing frame item 1. Using item 6E (screw) and 6F (washer) to fasten the frame to the wall.

Note: Remove & re-install stabilizing frame (item 1) if necessary.

Continue with installation for appropriate sink and faucet options chosen.

770155-100 Rev. D (6/17)

1

2

4

6B

6F

6H

6D6G

35

6C

6A

6E

ITEM # DESCRIPTION PART NUMBER

1 Stabilizing Frame

2 Vertical Support Tube

3 Horizontal Support Tube

4 Vertical Support Tube

5 Horizontal Support Tube

6A (1) - Ball Joint 770144-201.YYY0A

6B (1) - Ball Joint Connector 770145-201.YYY0A

6C (1) - Foot Ferrules 770146-201.YYY0A

6 Hardware/Mounting Kit6D (2) - Wall Escutcheons6E (2) - Screws (Ø 5.5mm x 50mm)6F (2) - Washers (OD - Ø 16mm, ID - Ø 6mm)6G (6) - Screws (head Ø 7.4mm x 32.8mm) 6H (6) - Wall Anchors

770226-202.YYY0A

NOTCH STUDSOR TOE-NAIL

C/L OF 2 x 6REINFORCEMENT

DRAIN PIPE

FIGURE 1

WATER SUPPLY PIPES

LAVATORY CROSS-PIECE SUPPORT

INSTALLING CROSS-PIECE

*FOR OAK HILL CONSOLE STABILIZING FRAME

FINISHED FLOOR