installation instructions for part inst … integra 1990-1993 acura integra 1994-2000 acura legend...

INSTALLATION INSTRUCTIONS FOR PART INST-7800

APPLICATIONS

CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the aftermarket radio.

• 99-7888 • 99-7889• 99-7890 • 99-7891• 99-7892 • 99-7893• 99-7894 • 99-7895

Refer to each section title page.

INSTALLATION INSTRUCTIONS

TOOLS REQUIRED

Acura/Honda 1990-1998INST-7800

See application list inside

99-7888AcuraIntegra 1990-1993AcuraIntegra 1994-2000AcuraLegend 1990AcuraLegend 1991-1996AcuraTL 1996-1998AcuraVigor 1992-1994HondaAccord 1990-1993HondaOdyssey 1995-1998IsuzuOasis 1996-1999

99-7889HondaPrelude 1992-1995

99-7890/99-7892AcuraCL 1997-1999AcuraIntegra 1990-1993AcuraIntegra 1994-2000AcuraLegend 1990AcuraLegend 1991-1996AcuraTL 1996-1998AcuraVigor 1992-1994HondaAccord 1990-1993HondaAccord 1994-1997HondaOdyssey 1995-1998IsuzuOasis 1996-1999

99-7891HondaCivic 1996-1998

99-7893HondaCR-V 1997-2000HondaPrelude 1997-2000

99-7894/99-7895HondaAccord 1998-2000

APPLICATION OVERVIEW

1. Remove(3)screwsfromeachsideofthecenterconsoleandremovetheconsole.

2. Remove(2)screwssecuringthefactoryheadunittothesub-dashsupportbracket.

3. Slidetheheadunit/pocketassemblyoutanddisconnectthewiring.(FigureA)

4. Locatetheradiohousing.(FigureB)

Continue to kit assembly for ALL VEHICLES, Section 1

Acura Integra1990-1993

(Figure A)

Section 1

Acura/Honda/Isuzu1990-2000

99-7888

•A)Radiohousing•B)Trimplate•C)Radiosupport•D)Mountingbracket•E)Equalizerdummyplate•F)Shaftmasks•G)(2)Palnuts

KIT FEATURES

KIT COMPONENTS

•2-ShaftandDINunitprovisions•Equalizerprovisions•Rearsupportprovisions

•Phillipsscrewdriver•Cuttingtool•Socketwrench

TOOLS REQUIRED

BA

D E

C

GF

(Figure B)

Dash DisassemblyINST-7800

1. Removethecovercaplocatedundertheemergencybrakeandremove(2)screwsexposed.

2. Remove(2)screwsfromtherearcornersofthelowerdashtrimbezelandremove.(FigureA)

3. Removetheashtrayand(2)screwsexposed.(FigureA)

4. Unsnaptheashtrayhousinganddisconnectthecigarettelighterharness.

5. Removethegearshifterknobandunsnaptheshiftertrim.

6. Remove(2)screwsbelowtheradioopeningandremovetheupperdashtrimbezel.

7. Remove(2)8mmscrewssecuringthefactoryheadunitanddisconnectthewiring.



Acura Integra 1994-2000

1. Remove(2)screwsbelowtheashtray.(FigureA)

2. Unclipthedashtrimbezelthendisconnectthecigarettelighterwiringandremovethebezel.

3. Remove(2)boltssecuringtherearofthefactoryheadunitanddisconnectthewiring.

4. Modifythefactoryradiohousingbycuttingand

removingtheshadedportionsofthehousinglip.(FigureB)


Acura Ledgend 1990

(Figure A) (Figure B)


2. Unclipthedashtrimbezelanddisconnectthecigarettelighterwiringandremovethebezel.

3. Remove(2)boltssecuringthe rearofthefactoryheadunitanddisconnectthewiring.



Acura Ledgend1991-1996

(Figure A) (Figure B)(Figure B)

(Figure A)

Factoryradiohousingopening

¼” ¼”

1¼” 1¼”

1” 1”

¾” ¾”

Dash Disassembly INST-7800

1. Usingasmallscrewdriver,uncliptheperimeteroftheradiotrimbezel.

2. Disconnecttheclimatecontrolandreardefrosterwiringandremovethebezel.

3. Remove(4)Phillipsscrewssecuringthefactoryheadunit/trimbezelassembly.(FigureA)

4. Loosen(2)Phillipsscrewssecuringthebackoftheheadunittothemetalhousingand

slidetheunitout.

Note, it is NOT necessary to remove the screws securing the metal housing to the bezel.

5. Disconnectthewiring.

6. Cutandremovethetopclipsfromtheradiohousing.(FigureB)


Acura TL 1996-1998

1. Removetheaccesscapfromtheclimatecontrolclusterand(1)screwexposed.(FigureA)

2. Uncliptheclusterandremove(2)screwsexposed.

3. Removetheashtrayand(2)Phillipsscrewsexposed.(FigureA)

4. Removethecovercapsfromeachfrontcornerofthecenterconsoleandthescrewsexposed.

5. Openthestoragecompartment,liftupthecarpetandremove(2)screwsexposed.

6. Liftuponthecenterconsoleandremove.

7. Uncliptheradiotrimbezelanddisconnectthewiring.

8. Remove(2)boltsfromthebackofthefactoryheadunitanddisconnectthewiring.

9. Modifythefactoryradiohousingbycuttingandremovingtheshadedportionsofthehousinglip.(FigureB)


Acura Vigor 1992-1994

(Figure A) (Figure A) (Figure B)(Figure B)


¼” ¼”

1¼” 1¼”1” 1”

¾” ¾”


1. Remove(4)screwsfromthelowerportionofthecenterconsole.(FigureA)

2. Removethegearshifterknobandlifttheconsoleout.

3. Removetheashtrayandashtraybracket.

4. Remove(2)screwsfromthebottomoftheheadunitsupport,slidetheunitoutanddisconnectthewiring.



Honda Accord 1990-1993

1. Remove(2)8mmscrewsundertheglovebox.

2. Remove(1)Phillipsscrewonthegloveboxarmandremovethebox.

3. Remove(2)Phillipsscrewsexposedinthegloveboxcavitythenremove(2)Phillipsscrewsbelowthestorageboxdoor(undertheashtray).(FigureA)

4. Remove(2)screwsfromtheleftsideofthedashconsole.

5. Remove(1)Phillipsscrewfromthecointray

andthenremove(1)Phillipsscrewundertheignition.

6. Remove(4)Phillipsscrewssecuringthefactorycupholder.

7. Remove(2)8mmhex-headscrewsfromtherearsupportbracketanddisconnectthewiring.



Honda Odyssey 1995-1998Isuzu Oasis 1996-1999

(Figure A) (Figure B) (Figure A) (Figure B)


For 2-Shaft head unit provision:

1. Attachthetrimplateandshaftmaskstotheradiohousing.(FigureA1)

2. Slidetheaftermarketheadunitintothekitandsecurewithshaftnuts.(FigureA1)

Continue to Step 4

For DIN head unit provision:

1. Cutandremovetheshaftsupportsfromtheradiohousing.

2. SlidetheDINcageintothekitandsecurebybendingthemetal lockingtabsdown.

3. Slidetheaftermarketheadunitintothecageuntilsecure.(FigureA2)

Continue to Step 4

All Vehicles

(Figure A1) (Figure A2)

4. If an equalizer will be included: Slidetheaftermarketequalizerintothebackoftheradiohousing.Usingthe

hardwareincludedwiththeequalizer,mounttheunittothekit.(FigureB)

If an equalizer will NOT be included: SnaptheEqualizerDummyPlateintotheradiohousing.(FigureC)

5. InserttheRadioSupportintotheMountingBracket.(FigureD)

6. TurntheRadioSupporttolockintoplace.(FigureE)

7. Mounttheassemblytothefactorymountingplateinthesub-dashwith(2)PalNutssupplied.(FigureF)

Continue on next page

(Figure B) (Figure C)

Kit Assembly INST-7800

8. Locatethefactorywiringharnessinthedash.MetrarecommendsusingthepropermatingadapterfromMetraorAXXESS.Re-connectthenegativebatteryterminalandtesttheunitforproperoperation.

9. Integra, Accord, Odyssey, Oasis: Snaptheheadunit/kitassemblyintothesub-dash.(FigureG)

Legend, TL, Vigor: Snaptheheadunit/kitassemblyintothefactorytrimbezel.Mountthebezeltothedashwiththosescrews

previouslyremoved.(FigureH)

10.Reassembledashinreverseorderofdisassembly.

All Vehicles

(Figure G) (Figure H)(Figure F)

(Figure D) (Figure E)


3. Pullupontheconsoletrimbezelandremove.

4. Usinganangledscrewdriver,remove(2)screwssecuringthegearshifterbrackettothebezel.(FigureA)

5. Remove(4)screwsfromtheradiotrimbezel,removethefactoryheadunitassemblyanddisconnectthewiring. (FigureB)


Honda Prelude 1992-1995

(Figure A)

Section 2

HondaPrelude1992-1995

99-7889

•A)Radiohousing•B)Trimplate•C)Shaftmasks•D)Equalizerdummyplate•E)Radiosupport•F)Mountingbracket

KIT FEATURES

KIT COMPONENTS



TOOLS REQUIRED

BA

D

F

E

(Figure B)

C

1. Remove(2)screwsfromthetopoftheconsoletrimbezel.(FigureA)

2. Slidethefrontseatsbackandremove(4)Phillipsscrewsfromeachsideofthebezel.(FigureA)


INST-7800 Dash Disassembly


1. Attachthetrimplateandshaftmaskstotheradiohousing.(FigureA)

2. Slidetheaftermarketheadunitintothekit.(FigureA)

3. Securewithshaftnuts.(FigureA)

Continue to Step 4


1. Cutandremovetheshaftsupportsfromtheradiohousing.

2. SlidetheDINcageintothehousingandsecurebybendingthemetallockingtabsdown.(FigureB)

3. Slidetheaftermarketheadunitintothecageuntilsecure.(FigureB)

Continue to Step 4

4. If an equalizer will be included:

Slidetheunitintothebackoftheradiohousingandsecure.

If an equalizer will not be included:

Snaptheequalizerdummyplateintotheopening.

5. Inserttheradiosupportintothemountingbracket.(FigureC)

6. Turntheradiosupporttolockintoplace.(FigureD)

7. Securetheassemblytothefactorymountingplateinthesub-dashwith(2)PalNutssupplied.(FigureE)

8. Locatethefactorywiringharnessinthedash.Metrarecommendsusing

thepropermatingadapterfromMetraorAXXESS.Re-connectthenegativebatteryterminalandtesttheunitforproperoperation.

9. Snaptheheadunit/kitassemblyintotheradiotrimbezelandmountthebezeltothedashwiththosescrewspreviouslyremoved.(FigureF)

10. Reassembledashinreverseorderofdisassembly.

All Vehicles

(Figure A) (Figure B) (Figure C) (Figure D) (Figure E) (Figure F)


1. Uncliptheradiotrimbezelanddisconnecttheclockandclimatecontrolwiring.(FigureA)

2. Remove(2)8mmhex-headscrewssecuringthefactoryheadunitanddisconnectthewiring.

3. Locatetheradiohousingandthencutandremovethesideclipsfromtheradiohousing. (FigureBandC)

4. Mounttherearsupportbrackettothebottomtabontheradiohousingwith(2)carriageboltsand(2)nuts.(FigureD)


Acura CL 1997-1999Section 3


99-7890

•A)Radiohousing•B)Rearsupportbracket•C)Shaftsupports•D)(2)Nuts•E)Radiosupport•F)Mountingbracket•G)Equalizerdummyplate•H)(2)Carriagebolts•I)(2)Palnuts

KIT FEATURES

KIT COMPONENTS



TOOLS REQUIRED

BA

D

F

E

C

INST-7800

G

H I

Dash Disassembly

Acura CL 1997-1999

1. Remove(3)screwsfromeachsideofthecenterconsoleandremovetheconsole.(FigureA)

2. Remove(2)screwssecuringthefactoryheadunittothesub-dashsupportbracket.

3. Slidetheheadunit/pocketassemblyoutanddisconnectthewiring.

4. Cutandremovethetopclipsandbottomtabfromtheradiohousing.(FigureB)

5. Inserttheradiosupportintothemountingbracket.(FigureC)

6. Turntheradiosupporttolockintoplace.(FigureC)

7. Mounttheassemblytothefactorymountingplateinthesub-dashwith(2)palnutssupplied.(FigureD)



(Figure C) (Figure D) (Figure A) (Figure B) (Figure D)


(Figure C)


Acura Legend 1990

1. Removethecovercaplocatedundertheemergencybrakeandremove(2)screwsexposed.(FigureA)


3. Removetheashtrayand(2)screwsexposed.Unsnaptheashtrayhousinganddisconnectthecigarettelighterharness.





8. Inserttheradiosupportintothemountingbracket.Turntheradiosupporttolockintoplace.(FigureC)




(Figure A) (Figure B (Figure C) (Figure D)

1. Remove(2)screwsbelowtheashtray.Unclipthedashtrimbezel.(FigureA)

2. Disconnectthecigarettelighterwiringandremovethebezel.




6. Mounttheassemblytothesub-dashmountingplatewith(2)palnutssupplied.(FigureD)

7. Modifythefactoryradiohousingbytrimmingtheshadedportionsofthehousinglip.(FigureE)


(Figure A)









Acura Legend 1991-1996

(Figure C)

Acura Legend 1990

(Figure D) (Figure E)



¼” ¼”

1¼”

1”

¾”

1”

(Figure A)

(Figure D)

(Figure B)


1. Usingasmallscrewdriver,uncliptheperimeteroftheradiotrimbezel.



4. Loosen(2)Phillipsscrewssecuringthebackoftheheadunittothemetalhousing.

5. Disconnectthewiring.Cutandremovethetopclipsandbottomtabfromtheradiohousing.(FigureB)




Acura TL 1996-1998

(Figure C)

(Figure A)

(Figure D)

(Figure B)



2. Uncliptheclusterandremove(2)screwsexposed.(FigureA)

3. Removetheashtrayand(2)Phillips screwsexposed.



6. Liftuponthecenterconsoleandremove.Uncliptheradiotrimbezelanddisconnectthewiring.



9. Inserttheradiosupportintothemountingbracket.Turntheradiosupporttolockintoplace.

10. Mounttheassemblytothesub-dashmountingplatewith(2)palnutssupplied.(FigureC)

11. Modifythefactoryradiohousingbytrimmingtheshadedportionsofthehousinglip.(FigureD)




(Figure C) (Figure D)



¼” ¼”

1¼”

1”

¾”

1”

1. Remove(4)screwsfromthelowerportionofthecenterconsole.(FIgureA)

2. Removethegearshifterknobandlifttheconsoleout.Removetheashtrayandashtraybracket.




6. Mounttheassemblytothefactorymountingplateinthesub-dashwith(2)palnutssupplied.(FIgureD)



(Figure C)

(Figure A)

(Figure D)

(Figure B)



1. Removetheashtrayand(1)3/4”#8Phillipsscrewexposed.

2. Openthestoragecompartmentandremove(2)#8Phillips screwsexposed.

3. Removethecupholdertrayand(3)#8Phillipsscrewsinside.(FigureA)

4. Liftthecenterconsoleoutandremove(2)Phillipsscrewsexposedatthebaseofthedashtrimbezel.Unclipthebezelandremove.(FigureA)

5. Remove(2)hex-headscrewssecuringthefactoryheadunitanddisconnectthewiring.

6. Locatetheradiohousingandthencutandremovethesideclipsfromtheradiohousing.(FigureBandC)

7. Mounttherearsupportbrackettothebottomtabontheradiohousingwith(2)carriageboltsand(2)kepsnuts.(FigureD)



(Figure C)

(Figure A)

(Figure D)

(Figure B)


1. Remove(2)8mmscrewsunderthegloveboxandthenremove(1)Phillipsscrewonthegloveboxarmandremovethebox.

2. Remove(2)Phillipsscrewsexposedinthegloveboxcavity.

3. Remove(2)Phillipsscrewsbelowthestorageboxdoor(undertheashtray).

4. Remove(2)screwsfromtheleftsideofthedashconsoleandthenremove(1)Phillipsscrewfromthecointray.

5. Remove(1)Phillipsscrewundertheignitionandthenremove(4)Phillipsscrewssecuringthefactorycupholder.







1. Snaptheshaftsupportsintotheradiohousing.(FigureA)

2. Slidetheaftermarketheadunitintothekitandsecurewithshaftnuts.(FigureA)

Continue on next page, Step 3


1. SlidetheDINcageintothekitandsecurebybendingthemetallockingtabsdown.



All Vehicles

Dash Disassembly


(Figure C) (Figure D)



(Figure A)

(Figure B)

3. If an equalizer will be included: Slidetheunitintothebackoftheradiohousing

andsecure.

If an equalizer will not be included: Snaptheequalizerdummyplateintotheopening.

4. Locatethefactorywiringharnessinthedash.MetrarecommendsusingthepropermatingadapterfromMetraorAXXESS.

5. Re-connectthenegativebatteryterminalandtesttheunitforproperoperation.

6. Accord 1990-1993, Integra, Odyssey, Oasis: Snaptheheadunit/kitassemblyintothesub-dash.

Legend, TL, Vigor: Snaptheheadunit/kitassemblyintothefactorytrimbezel.Mountthebezeltothedashwiththosescrewspreviouslyremoved.(FigureA)

Accord 1994-1997, CL: Slidetheheadunit/kitassemblyintothesub-dashandmounttherearsupportbrackettotherearsupportprovisionwith(2)hex-headboltspreviouslyremoved.(FigureB)

All Vehicles


(Figure A)

(Figure B)

Dash DisassemblyINST-7800

3. Pullstraightdownonthelowersteeringcolumnpanelandremovethepanel.

4. Remove(2)Phillipsscrewsundertheclimatecontrolpanel.

5. Remove(4)Phillipsscrewsfromthelowerdashlocation.

6. Remove(2)8mmhex-headscrewssecuringthebottom-rearofthefactoryheadunitanddisconnectthewiring.

Continue to installation instructions for ALL VEHICLES, Section 4

Honda Civic 1996-1998


TOOLS REQUIRED

D

C

Section 4

HondaCivic1996-1998

99-7891

•A)Radiohousing•B)Faceplate •C)Radiosupport•D)Mountingbracket •E)(2)Palnuts•F)Shaftsupports

KIT FEATURES

KIT COMPONENTS

•2-ShaftandDINunitprovisions•Rearsupportprovisions

BA

F

E

1.

Remove(2)Phillipsscrewsfromthebottomedgeofthegloveboxdoorandremovethedoor.

2.

Remove(3)Phillipsscrewsfromthelowersteeringcolumnpanel.




1. Snapthefaceplate*andshaftsupportsintotheradiohousing.Thenslidetheaftermarketheadunitintothekitandsecurewithshaftnuts.(FigureA)

Continue to Step 2


1. Positiontheradiohousingintheradioopeningbyinsertingthelocatingpinsontherightsideofthehousingintotheholesontheleftsideofthefactorypocket.(FigureB)

Continue to Step 2





6. 2-Shaft Head Units: Snaptheheadunit/kitassemblyintothesubdash.Besuretheunitengagesthe

radiosupportinthedash.(FigureE)

DIN Head Units: SlidetheDINcageintothemountedradiohousingandsecurebybendingthe

metallockingtabsdown.Slidetheaftermarketheadunitintothecageuntilsecure.Besuretheunitengagestheradiosupportinthedash.(FigureF)


(Figure A) (Figure B) (Figure C) (Figure D) (Figure E) (Figure F)

Optional

INST-7800

1. Uncliptheradiotrimbezelanddisconnecttheclockandclimatecontrolwiring.(FigureA)

2. Remove(2)8mmhex-headscrewssecuringthefactoryheadunitanddisconnectthewiring.


Acura CL 1997-1999


TOOLS REQUIRED

Section 5


99-7892

•A)Radiohousing•B)Faceplate•C)ISO-DINbrackets•D)Rearsupportbracket•E)(2)Phillipsscrews

KIT FEATURES

KIT COMPONENTS


BA

C D

E

(Figure A)


1. Remove(3)screwsfromeachsideofthecenterconsoleandremovetheconsole.(FigureA)

2. Remove(2)screwssecuringthefactoryheadunittothesub-dashsupportbracket.(FigureA)

3. Slidetheheadunit/pocketassemblyoutanddisconnectthewiring.


For ISO-DIN head units: Mount the rear support bracket to the back of the pocket with (2) Phillips screws supplied.(FigureC)



3. Cutandremovethesideclipsfromtheradiohousing.(FigureB)

4. Mounttherearsupportbrackettothebackofthepocketwith(2)Phillipsscrewssupplied.(FigureC)


Acura CL 1997-1999

(Figure C)

(Figure B)


(Figure A)


1. Removethecovercaplocatedundertheemergencybrakeandremove(2)screwsexposed.(FigureA)


3. Removetheashtrayand(2)screwsexposed.Unsnaptheashtrayhousinganddisconnectthecigarettelighterharness.








(Figure C)

(Figure A)

(Figure B)


2. Unclipthedashtrimbezel.




Acura Legend 1990

(Figure A)



6. Modifythefactoryradiohousingbytrimmingtheshadedportionsofthehousinglip.(FigureC)


Acura Legend 1990

(Figure C)

(Figure B)


¼” ¼”

1¼” 1”

¾” ¾”

1¼”1”







Acura Legend 1991-1996

(Figure C)

(Figure A)

(Figure B)


1. Usingasmallscrewdriver, uncliptheperimeteroftheradiotrimbezel.



4. Loosen(2)Phillipsscrewssecuringthebackoftheheadunittothemetalhousingandslidetheunitout.Disconnectthewiring.

Note: it is NOT necessary to remove the screws securing the metal housing to the bezel.




Acura TL 1996-1998

(Figure C)

(Figure A)

(Figure B)


2. Uncliptheclusterandremove(2)screwsexposed.Removetheashtrayand(2)Phillipsscrewsexposed.(FigureA)



5. Liftuponthecenterconsoleandremove.Uncliptheradiotrimbezelanddisconnectthewiring.



8. Modifythefactoryradiohousingbytrimmingtheshadedportionsofthehousinglip.(FigureC)



(Figure C)

(Figure A)

(Figure B)


¼” ¼”

1¼” 1”

¾” ¾”

1¼”1”


1. Remove(4)screwsfromthelowerportionofthecenterconsole.(FigureA)

2. Removethegearshifterknobandlifttheconsoleout.Removetheashtrayandashtraybracket.






1. Removetheashtrayand(1)3/4”#8Phillipsscrewexposed.

2. Openthestoragecompartmentandremove (2)#8Phillipsscrewsexposed.

3. Removethecupholdertrayand(3)#8Phillipsscrewsinside.(FigureA)

4. Liftthecenterconsoleoutandremove(2)Phillipsscrewsexposedatthebaseofthedashtrimbezel.(FigureB)

5. Unclipthebezelandremove.Remove(2)hex-headscrewsecuringthefactoryheadunitanddisconnectthewiring.

6. Cutandremovethesideclipsfromtheradiohousing.(FigureC)

7. Mounttherearsupportbrackettothebackofthepocketwith(2)Phillipsscrewssupplied.(FigureD)



(Figure C)

(Figure A)

(Figure B)

(Figure D)

(Figure B)

(Figure C)

(Figure A)


1. Remove(2)8mmscrewsundertheglovebox.

2. Remove(1)Phillipsscrewonthegloveboxarmandremovethebox.

3. Remove(2)Phillipsscrewsexposedintheglove boxcavity.

4. Remove(2)Phillipsscrewsbelowthestorageboxdoor(undertheashtray).

5. Remove(2)screwsfromtheleftsideofthedashconsole.Remove(1)Phillipsscrewfromthecointray.

6. Remove(1)Phillipsscrewundertheignition.Remove(4)Phillipsscrewssecuringthefactorycupholder.


8. Cutandremovethetopclipsfromtheradiohousing.



Honda Odyssey 1995-1998, Isuzu Oasis 1996-1999 All Vehicles


1. Snapthefaceplateintotheradiohousing.(FigureA)

2. Slidetheaftermarketheadunitintothekitandsecurewithshaftnuts.(FigureA)


(Figure C)


(Figure C)

(Figure A)

(Figure B)



1. SlidetheDINcageintothekitandsecurebybendingthemetallockingtabsdown.(FigureB)


Continue to Step 3

For ISO-DIN head unit provision:

1. SlidetheISO-DINBracketsontothesidesoftherearsupportbracket.CutandremovetheshaftsupportsfromtheFaceplateandsnapintotheradiohousing.(FigureC)

2. Slidetheaftermarketheadunitintothehousing;aligntheholesintheunitwiththeholesintheISO-DINbracketsandmountwiththescrewssuppliedwiththeunit.(FigureC)

Continue to Step 3

All Vehicles



5. Accord 1990-93, Integra, Odyssey, Oasis: Snaptheheadunit/kitassemblyintothesub-dash.

Legend, TL, Vigor: Snaptheheadunit/kitassemblyintothefactorytrimbezel.Mountthebezeltothedashwiththosescrewspreviouslyremoved.(FigureD)

Accord 1994-97, CL: Slidetheheadunit/kitassembly

intothesub-dashandmounttherearsupportbrackettotherearsupportprovisionwith(2)hex-headboltspreviouslyremoved.(FigureE)

(Figure C)

(Figure B)

(Figure E)

(Figure D)

INST-7800

removethe(4)outerscrewsexposed.Unclipthecenterconsoleandremove.

6. Remove(2)Phillipsscrewssecuringtheradiotrimbezel,disconnectthewiring,andremovethetrimbezel/headunitassembly.(FigureA)

7. Remove(4)Phillipsscrewssecuringtheheadunittothebezelandremove.

8. CutandremoveallmountingclipsontheradiohousingEXCEPTtheclipsstamped“C”.(FigureB)


Honda CR-V 1997-2000


TOOLS REQUIRED

Section 6

Honda1997-2000

99-7893

•A)Radiohousing

KIT FEATURES

KIT COMPONENTS


A

(Figure A)

1.

Opentheglovebox,squeezetheretainingclipsandremovethestoppers.

2.

Lowerthegloveboxandremove(2)Phillipsscrewsfromtheleftedge.

3.

Remove(2)Phillipsscrewsfromthelowersteeringcolumnpanelandremove.

4.

Unclipthelowerconsolecover(belowtheashtrayandpocket)andremove.

5.

Remove(2)Phillipsscrewsfromthebaseofthecenterconsole,opentheconsolepocketand

Honda CR-V 1997-2000

(Figure B)

“C”

“C”

Dash Disassembly


1. Usingapanelremovaltool,uncliptheradiotrimbezelandremove(someforcemayberequired).(FigureA)

2. Remove(4)Phillipsscrewssecuringthefactoryheadunit/brackethousingassemblyanddisconnectthewiring.

3. Remove(4)Phillipsscrewssecuringthefactoryheadunittothebrackethousingandremove.

4. CutandremoveallmountingclipsontheradiohousingEXCEPTtheclipsstamped“P”.(FigureB)




1. Slidetheaftermarketheadunitintotheradiohousing.(FigureA)

2. Secureunitwithshaftnuts.(FigureA)

Continue to Step 3


1. CutandremovetheshaftsupportsfromtheradiohousingandthenslidetheDINcageintothekit(securebybendingthemetallockingtabsdown).


Continue to Step 3



All Vehicles



(Figure B)

(Figure A)

“P”

“P”


5. CR-V:

Snaptheheadunit/kitassemblyintotheradiotrimbezelandmountthebezeltothedashusingthosescrewspreviouslyremoved.(FigureC)

Prelude:

Snaptheheadunit/kitassemblyintothefactorybrackethousingandmountthehousingtothesub-dashwith(4)Phillipsscrewspreviouslyremoved.(FigureD)

All Vehicles

(Figure D)

(Figure C)

A B



TOOLS REQUIRED

Section 7

Honda1998-2000

99-7894

•A)Radiohousing•B)Brackets•C)Equalizerdummyplate

KIT FEATURES

KIT COMPONENTS

•2-ShaftandDINunitprovisions•Rearsupportprovisions•Equalizerpocketprovisions

1.

Unsnaptheclockpanel,disconnectthewiringandremove.

2.

Remove(1)Phillipsscrewexposedintheclockcavity.(FigureA)

3.

Remove(2)Phillipsscrewsbelowthefactoryheadunit.Uncliptheradiotrimbezelanddisconnectthewiring.(FigureA)

4.

Remove(4)Phillipsscrewssecuringthefactoryheadunitassemblyanddisconnectthewiring.

5.

Remove(2)screwssecuringthefactorypockettotheassembly.

6.

SnaptheBracketsontothefrontofthelowermountingtabsontheradiohousing.(FigureB)



C

(Figure B)

(Figure A)



7. If NOT KEEPING the factory pocket:

Continue to installation instructions for ALL VEHICLES

If KEEPING the factory pocket: Cutsections“A”onthebackofthe

radiohousingandbreakawaythebottomportionofthehousing.(FigureC)

Mountthefactorypockettothehousingwith(2)screwspreviouslyremoved.(FigureD)




1. OrderMetra’s87-09-9901andsnapitintotheradiohousing.(FigureA)

2. Slidetheaftermarketunitintothekitandsecurewithshaftnuts.(FigureA)






All Vehicles

(Figure D)

(Figure C)

“A”


(Figure B)

(Figure A)

87-09-9901


3. If an equalizer will be included: Slidetheunitintothebackofthe

radiohousingandsecure.

If an equalizer will NOT be included:Snaptheequalizerdummyplateintotheopening.



6. Mounttheheadunit/kitassemblytothesub-dashwith(4)Phillipsscrewspreviouslyremoved.(FigureC)

7. Re-attachtheradiotrimbezel.Besuretheclipsonthebackofthebezelengageslots“A”onthekit.(FigureC)

All Vehicles

(Figure C)

“A”

A


•Phillipsscrewdriver

TOOLS REQUIRED

Section 8

Honda1998-2000

99-7895

•A)Radiohousing

KIT FEATURES

KIT COMPONENTS

•2-ShaftandDINunitprovisions•CDjewelcasepocket

1.

Unsnaptheclockpanel,disconnectthewiringandremove.

2.

Remove(1)Phillipsscrewexposedintheclockcavity.(FigureA)

3.

Remove(2)Phillipsscrewsbelowthefactoryheadunit.(FigureA)

4.

Uncliptheradiotrimbezelanddisconnectthewiring.

5.

Remove(4)Phillipsscrewssecuringthefactoryheadunitassemblyanddisconnectthewiring.



6. Remove(2)screwssecuringthefactorypockettotheassembly.


(Figure A)



1. OrderMetra’s87-09-9901andsnapitintotheradiohousing.(FigureA)

2. Slidetheaftermarketunitintothekitandsecurewithshaftnuts.(FigureA)






All Vehicles

3. Locatethefactorywiringharness inthedash.Metrarecommends

usingthepropermatingadapterfromMetraorAXXESS.


5. Mounttheheadunit/kitassemblytothesub-dashwith(4)Phillipsscrewspreviouslyremoved.(FigureC)

6. Re-attachtheradiotrimbezel.(FigureD)

Note: Make sure the clips on the back of the bezel engage the slots on the kit.

(Figure B)

(Figure A)

87-09-9901

(Figure D)

(Figure C)

METRA CAR STEREOS CAR AUDIO SYSTEMS

http://www.carid.com/metra/

http://www.carid.com/stereos.html

installation instructions for part inst … integra 1990-1993 acura integra 1994-2000 acura legend...

Documents