installation instructions - bainultra · • risk of hyperthermia; people using medication and/or...
TRANSCRIPT
NOKORI® INSTALLATION INSTRUCTIONS
IMPORTANT INFORMATION FOR THE INSTALLER AND THE OWNER
TO B
E K
EP
T B
Y T
HE
OW
NE
R
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
TABLE OF CONTENT
IMPORTANT SAFETY INSTRUCTIONS .....................................................................................................................1
PARTS & TOOLS ...................................................................................................................................................3
SITE PREPARATION ..............................................................................................................................................5
INSTALLATION
• REMOTE MOUNTING OF TURBINE
… WITH ACCESS UNDER BATH .......................................................................................................6
… PIPING & WIRING UNDER FLOOR & NO ACCESS UNDER BATH ..................................................19
… PIPING & WIRING ABOVE FLOOR & NO ACCESS UNDER BATH ..................................................27
• TURBINE FACTORY INSTALLED
… WITH ACCESS UNDER BATH ....................................................................................................32
… WIRING UNDER FLOOR & NO ACCESS UNDER BATH ...............................................................40
… WIRING ABOVE FLOOR & NO ACCESS UNDER BATH ................................................................44
• BATH INSTALLED AGAINST 1, 2 OR 3 WALLS ............................................................................................47
CUTTING TEMPLATES: CONTROL & AIR VENT .....................................................................................................48
1 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NO
KO
RI
- in
sta
lla
tio
n
IMPORTANT SAFETY INSTRUCTIONS PERTAINING TO RISKS OF FIRE, ELECTROCUTION OR PERSONAL INJURY
READ AND FOLLOW ALL INSTRUCTIONS • SAVE THESE INSTRUCTIONS
THIS DOCUMENT SUPERCEDES THE INSTALLATION INSTRUCTION IN THE OWNER’S MANUAL.
WARNINGS
• Risk of hyperthermia; people using medication and/or having an adverse medical history should consult a physician before using a Hydro-thermo massage® bathtub equipped with a heater.
• Risk of hyperthermia and possible drowning: do not use a Hydro-thermo massage® bathtub equipped with heater immediately following strenuous exercise.
• Risk of fetal injury; pregnant or possibly pregnant women should consult a physician before using a Hydro-thermo massage® bathtub equipped with a heater.
• Risk of accidental injury or drowning; do not use drugs or alcohol before or during the use of a Hydro-thermo massage® bathtub equipped with a heater.
• Use this unit only for its intended purposes or as described in this manual. Use only accessories or devices recommended by the manufacturer.
• Risk of hyperthermia and possible drowning. Check and adjust water temperature before use. Water temperature exceeding 100ºF (38ºC) may be injurious to your health.
• To reduce the risk of injury, as with any other conventional bath, do not allow children or physically impaired people to use this unit unless they are closely supervised at all times.
• To avoid injury, exercise care when entering or exiting the Thermomasseur®.
• The Geysair should always be connected to the hot water intake. If it is not the case, then, the Geysair should be deacti-vated via the bath control.
RISK OF ELECTRICAL SHOCK
• Disconnect electric power before servicing.
• Do not permit electrical appliances (hair dryer, lamp, telephone, radio, television, etc.) within 5’ (1,5 m) of the Thermomasseur®.
• Before using the Thermomasseur®, its exterior construction (podium or skirting) should be finished so that a bather cannot accidentally come in contact with electrical components (turbine and power module).
• For indoor use only.
NOKORI® COLLECTION
IMPORTANT SAFETY INSTRUCTIONS
2
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
READ AND FOLLOW ALL INSTRUCTIONS • SAVE THESE INSTRUCTIONS
THIS DOCUMENT SUPERCEDES THE INSTALLATION INSTRUCTION IN THE OWNER’S MANUAL.
ELECTRICAL CONNECTIONS:
• Never drop or insert objects into any openings.
• The Thermomasseur® must be connected only to a supply circuit that is protected by a 20 amp class A ground fault circuit interrupter (GFCI). Optional therapies such as Chromotherapy and/or 2nd heated backrest and/or WarmTouchShell® must be connected to a supply circuit that is protected by a 15 amp class A ground fault circuit interrupter (GFCI). This interrupter is supplied by a certified electrician and must be tested on a regular basis in accordance with manufacturer’s instructions. The GFCI ground must be connected. If defective, do not use the Thermomasseur. Disconnect immediately and call a certified electrician.
• Use 12 AWG (or greater) copper conductors that resist temperatures of at least 194ºF (90ºC).
• Canada only: for permanently connected units. A green-colored terminal (or a wire connector marked g., gr., ground or grounding) is provided within the terminal compartment (not applicable if unit supplied with an electric plug). To reduce the risk of electrocution, connect this terminal or connector to the grounding terminal of your electric service or supply panel with conductor equivalent in size to the circuit conductors supplying the equipment and be 12 AWG or more.
• All electrical connections must be carried out by a certified electrician and must respect federal, provincial/state, and local building codes and regulations.
• Install in accordance with manufacturer’s installation instructions.
• For ThermoMasseur baths using remote turbine installation (not mounted on the bath), grounding continuity must be tested between the bath grounding terminal and the bath power supply. Failure to perform the grounding continuity test could result in serious personal injury.
WATER LEAK TEST
• Once plumbing is fully installed and before beginning any other work, fill the ThermoMasseur® with water to overflow level and wait 30 minutes. Check all plumbing hook-ups and bath for leaks. BainUltra® is not responsible for any water damage caused by improper installation (see Warranty section).
IMPORTANT SAFETY INSTRUCTIONS (cont’d) PERTAINING TO RISKS OF FIRE, ELECTROCUTION OR PERSONAL INJURY
3 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
nPARTS & TOOLS
A. STANDARD PARTS - PLUMBING
B. OPTIONAL PARTS – PLUMBING (1)
DESCRIPTION QTY
A Plated drain clicker 1
B Rubber seal 1
C Brass drain shoe 1
D Nylon conic shaped seal for drain 1
E Brass nut 2
F 4 in. brass tailpiece 1
G Brass overflow to drain pipe 1
H Nylon flat seal with flange 1
I 1-1/2 in. male threaded adaptor 1
J 1-1/2 overflow male-to-male connector 1
K Floor anchor 2
ISLAND TUB DRAIN® (ITD) KIT
• Makes installation and servicing easier for removal of bath.
• Allows you to connect the bath drain tailpiece to the plumbing pipe without need for tightening to seal once the bath is lowered to the floor.
(1): REQUIRED WHEN NO ACCESS IS POSSIBLE UNDER THE BATH. ISLAND TUB DRAIN KIT INCLUDES ONE CONE-SHAPED DECK PLATE AND ONE 6 IN. (15 cm) THREADED TAILPIECE.
J
I
H
DEG
E
F
A
B
C
K
4
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS & TOOLS
STANDARD PARTS – THERMOMASSEUR®
DESCRIPTION QTY
L Turbine 1
M MiaPlus® Control 1
N 15 ft. wire for control 1
M
OPTIONAL PART – THERMOMASSEUR®(2)
(2): AIR VENT IS REQUIRED FOR THERMOMASSEUR BATH WHEN TURBINE IS MOUNTED ON BATH. See pages 34 to 36 for installation instructions.
48 in. level
Teflon tape
Silicone
Slip joint pliers
Drill
Jig saw with fine cut blade
Measuring tape
ABS & PVC Glue
MATERIAL & TOOLS REQUIRED
N
L
Air vent
5 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
nSITE PREPARATION
PLUMBING
• See faucet manufacturer’s specifications for zoning and plan water supply location accordingly.
• Position drain according to bath’s technical specifications.
WARNING
• Baths from Nokori® collection cannot be drilled for faucet installation. Faucets must be freestanding or wall-mounted models.
BEDDING
• Before installing, ensure that the floor underneath the bath can support 1500 lb (680 kg). The bath may sit directly on the floor.
SERVICE ACCESS AND VENTILATION
• A service access is necessary. Minimum dimensions are 22 in. x 18 in. (55 cm x 46 cm) to properly reach all electrical components of the system.
• An air vent is necessary. Minimum dimensions are: 2 in. x 4 in. (5 cm x 10 cm) to ensure proper functioning of the turbine.
There is a technical specification sheet for each BainUltra® ThermoMasseur® which includes information such as necessary dimensions of site before installation.
If you do not already have the technical specifications, download from the BainUltra® Web site at: bainultra.com or call us at: 1 800 463-2187.
FLOOR
1500 LB (680 KG)
6
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
PLUMBING – FLOOR LAYOUT FOR PIPES AND ACCESS
DIMENSIONS (IN.) A B C D E F
NOKORI 5827 58’’ 27’’ 10’’ 21’’ 95/8’’ 21/4’’
NOKORI 6331 63’’ 31’’ 101/2’’ 23’’ 10’’ 11/2’’
NOKORI 6429 64’’ 29’’ 10’’ 23’’ 95/8’’ 21/4’’
DIMENSIONS (IN.) A B C D
NOKORI 6935 69’’ 35’’ 101/4’’ 28’’
NOKORI 7131 701/2’’ 31’’ 121/4’’ 24’’
Access zone for drain
Access zone for drain
Recommended zones for optional components
Recommended zone for optional components
NOTE: Detailed plan is provided in the Documentation / Installation User Guides section of Nokori bath models on our Web site bainultra.com.
7 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED
PLUMBING – FLOOR LAYOUT FOR PIPES AND ACCESS
DIMENSIONS (IN.) A B C D E F
NOKORI 5827 58’’ 27’’ 10’’ 21’’ 95/8’’ 21/4’’
NOKORI 6331 63’’ 31’’ 101/2’’ 23’’ 10’’ 11/2’’
NOKORI 6429 64’’ 29’’ 10’’ 23’’ 95/8’’ 21/4’’
DIMENSIONS (IN.) A B C D
NOKORI 6935 69’’ 35’’ 101/4’’ 28’’
NOKORI 7131 701/2’’ 31’’ 121/4’’ 24’’
1 PLUMBING
HELPFUL TIP:
• Carefully place the tub on its side, on a blanket or a corrugated cardboard.
Measure & Align (2x)
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
NOTE: Detailed plan is provided in the Documentation / Installation User Guides section of Nokori bath models on our Web site bainultra.com.
Access zone for drain
Recommended zones for optional components
DIMENSIONS (IN.) A B C D E F
NOKORI OVAL 6737 60 3/4” 32 ” 9 ” 18 1/2” 26 7/8” 7”
8
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
WARNINGS
• If necessary adjust length of the flexible overflow piping connected to the overflow.
• Adjust length on the straight part of the brass overflow pipe (G) to fit with the drain position that varies with different bath models.
Flexible Overflow Piping (Factory installed)
J
I
H
C
BE
GE D
F
A. STANDARD PARTS - PLUMBING
DESCRIPTION QTY
A Plated drain clicker 1
B Rubber seal 1
C Brass drain shoe 1
D Nylon conic shaped seal for drain 1
E Brass nut 2
F 4 in. brass tailpiece 1
G Brass overflow to drain pipe 1
H Nylon flat seal with flange 1
I 1-1/2 in. male threaded adaptor 1
J 1-1/2 overflow male-to-male connector 1
K Floor anchor 2
K
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
1 PLUMBING
HELPFUL TIP:
• Carefully place the tub on its side, on a blanket or a corrugated cardboard.
Measure & Align (2x)
9 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED
2 TURBINE & GEYSAIR INSTALLATION (FOR THERMOMASSEUR®)
WARNINGS
• Access to Geysair® backflow preventer is necessary for cleaning of the filter.
• Baths from Nokori® collection cannot be drilled for faucet installation. Faucets must be freestanding or wall-mounted models.
• Geysair component cannot be remote mounted. It must stay at original position, attached to bath. Must never be unplugged.
3 ELECTRICAL WIRING OF OPTIONAL COMPONENTS
TURBINE REMOTE MOUNTING
SEE STEP 7 page 14
TURBINE REMOTE of CONTROL MODULES
SEE STEP 8 page 15
Geysair Hose and Back Flow Preventer
Hot Water Supply
1- 1/2 I.D. PVC Air Intake Pipe(“TIGERFLEX®” FLEXIBLE PVC)
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
1- 1/2 I.D. ABS, PVC PIPE (Rigid or “TIGERFLEX®”) and Fittings (not included)
10
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED
WARNINGS
• Be sure the floor is leveled. Use shims as needed.
• Do not remove the protective plastic film on the tub and place a drop-cloth in the tub during installation to protect the acrylic.
• The tub must be securely anchored to floor.
• Apply a bead of silicone around the perimeter of the bath once on the floor.
4 BATH INSTALLATION
HELPFUL TIPS:
• Carefully place the tub on its side, on a blanket or a corrugated cardboard.
• To easily manipulate the bathtub in a safe way during installation, we recommend using moving straps.
Floor surface
11/4“ Maximum
Measure & Align (2x)
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
11 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
WARNINGS
• Be sure the floor is leveled. Use shims as needed.
• Do not remove the protective plastic film on the tub and place a drop-cloth in the tub during installation to protect the acrylic.
• The tub must be securely anchored to floor.
• Apply a bead of silicone around the perimeter of the bath once on the floor.
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
11/4“ Maximum
4 BATH INSTALLATION
HELPFUL TIPS:
• Carefully place the tub on its side, on a blanket or a corrugated cardboard.
• To easily manipulate the bathtub in a safe way during installation, we recommend using moving straps.
Measure & Align (2x)
Floor surface
12
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED
5 ELECTRONIC CONTROL INSTALLATION – MIAPLUS® & MIAMULTI® (OPTIONAL) LOCATION
5 ELECTRONIC CONTROL INSTALLATION – DOT
Jig saw with fine cut blade
Drill
1/4 in. drill bit
Push wiring through drilled holes.
Remove protective film from watertight seal.
Secure to the wall with permanent waterproof sealant (mold-free clear silicone for bathrooms).
Secure temporarily with a tape for about 24 h.
Push wiring through drilled holes.
Remove protective film from watertight seal.
Secure to the wall with permanent waterproof sealant (mold-free clear silicone for bathrooms).
Secure temporarily with a tape for about 24 h.
TOOLS REQUIRED
TOUCH PAD INSTALLATION
TOUCH PAD INSTALLATION
LOCATION: Determine the most convenient location, on the wall close to tub. Peel off the protective film of sticker behind the control. You can add a silicone bead to secure to the wall.
WARNINGS
• Baths from Nokori® collection cannot be drilled for faucet installation. Faucets must be freestanding or wall-mounted model
• DRILLING OF WALL: Refer to the Cutting Template on page 43 for the location and diameter of the holes.
WARNING
• If the control is not factory installed, you will find it attached to the turbine, or to the electronic control modules.
7/8 in. Hole saw
Drill
TOOLS REQUIRED
DOT WarmTouchShell® (WTS)
DOT Chromatherapy (LED)
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
13 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED
WARNINGS
• Choose a location for the turbine with the shortest possible distance from the Thermomasseur® bath, no more than 15 ft. (4,6m), and a maximum of six elbow directional changes to ensure system performance. It can be under the floor, in a closet or any other place that can hide the turbine and if needed optional modules. Easy access must remain possible at all time and sufficient air ventilation is necessary for turbine.
• A service access is necessary. Minimum dimensions are 22 in. x 18 in. (55 cm x 46 cm) to properly reach all electrical components of the system.
• An air vent is necessary. Minimum dimensions are: 2 in. x 4 in. (5 cm x 10 cm) to ensure proper functioning of the turbine.
• Geysair® cannot be remotely installed.
6 REMOTE MOUNTING OF TURBINE
1”
Bottom of door When located in an enclosed location.
Floor
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
14
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED
WARNING
• For ThermoMasseur® baths using remote turbine installation (not mounted on the bath), grounding continuity must be tested between the bath grounding terminal and the bath power supply. Failure to perform the grounding continuity test could result in serious personal injury.
7 REMOTE MOUNTING OF TURBINE – AIR PIPE (THERMOMASSEUR®)
7 REMOTE MOUNTING OF TURBINE – ELECTRICAL CONNECTIONS (THERMOMASSEUR®)
• See page 17 for electrical diagram
Junction box Canada
GEYSAIR
TO GFCI Outlet United States
EXTENSION CORD
(If required for longer distance, contact BainUltra for ordering)
GEYSAIR CONNECTION
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
ABS or PVC Pipes and Fittings not included
15 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED
8 REMOTE MOUNTING OF TURBINE – ELECTRICAL CONNECTIONS OF OPTIONAL THERAPIES
• See page 18 for electrical diagram.
WARNINGS
• Electrical outlet must be installed by a certified electrician. Installation must be conducted in accordance with all local, provincial/state, and federal building/electrical codes and regulation.
• Connect electrical supply only after all low voltage wiring is properly installed on turbine.
• If you did not follow this last step, shut off and then restart your home’s circuit breaker.
• Turbine and air pipe should be clear of building materials and wiring.
A: 2nd Heated Backrest
B: Chromatherapy (LED)
C: MiaPlus®
D: MiaMulti® (Option)
Junction box Canada
Junction box Canada
TO GFCI Outlet United States
TO GFCI Outlet United States
C
A
D
B
Match the colors of the plug-in cables with those
of the turbine terminals
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
16
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED
A: WarmTouchShell®
B: Chromatherapy (LED)
C: DOT WarmTouchShell®
D: DOT Chromatherapy
TO GFCI Outlet United States
C
A
D
B
C DOT WarmTouchShell® (WTS)
D DOT Chromatherapy (LED)
Junction box Canada
8 REMOTE MOUNTING OF OPTIONAL THERAPIES (TUB ONLY) – ELECTRICAL CONNECTIONS
• See page 18 for electrical diagram.
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
17 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED
15A CIRCUIT20A CIRCUIT
NEUTRAL N L LOAD NEUTRAL N L LOAD
GROUND FAULT CIRCUIT INTERRUPTERS
GROUND FAULT CIRCUIT INTERRUPTERS
JUNCTIONBOX
JUNCTIONBOX
TURBINE WITH GEYSAIR(FOR MIAPLUS®, MIAMULTI®)
TURBINE WITHOUT GEYSAIR(FOR MIAPLUS®, MIAMULTI®)
N LN L
ELECTRICAL DIAGRAM – THERMOMASSEUR
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
18
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED
15A CIRCUIT
AIRSTREME(WARMTOUCHSHELL®)
N L N L
NEUTRAL N L LOAD
INMIX MODULE (CHROMATHERAPY)
GROUND FAULT CIRCUIT INTERRUPTERS
JUNCTIONBOX
ELECTRICAL DIAGRAM – THERAPIES
REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
19 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
1 PLUMBING – FLOOR LAYOUT FOR PIPES AND ACCESS
DIMENSIONS (IN.) A B C D
NOKORI 5827 58’’ 27’’ 95/8’’ 21’’
NOKORI 6331 63’’ 31’’ 10’’ 23’’
NOKORI 6429 64’’ 29’’ 95/8’’ 23’’
Opening for Island Tub Drain
Recommended zone for optional components
REMOTE MOUNTING OF TURBINE
PIPING & WIRING UNDER FLOOR & NO ACCESS UNDER BATH
DIMENSIONS (IN.) A B C
NOKORI 6935 69’’ 35’’ 28’’
NOKORI 7131 70-1/2’’ 31’’ 24’’
Opening for Island Tub Drain
Recommended zone for optional components
20
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED REMOTE MOUNTING OF TURBINE
PIPING & WIRING UNDER FLOOR & NO ACCESS UNDER BATH
NOTE: Detailed plan is provided in the Documentation / Installation User Guides section of Nokori bath models on our Web site bainultra.com.
WARNING
• Refer to supplied instructions for Island Tub Drain installation.
1 PLUMBING
HELPFUL TIP: Carefully place the tub on its side, on a blanket or a corrugated cardboard.
Measure & Align (2x)
Island Tub Drain
Opening for Island Tub Drain
Recommended zones for optional components
1 PLUMBING – FLOOR LAYOUT FOR PIPES AND ACCESS (CONT’D)
DIMENSIONS (IN.) A B C D E F
NOKORI OVAL 6737 60 3/4” 32 ” 6 1/2” 18 1/2”” 26 7/8” 7”
21 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED
WARNING
• Refer to supplied instructions for Island Tub Drain installation.
1 PLUMBING
HELPFUL TIP: Carefully place the tub on its side, on a blanket or a corrugated cardboard.
Measure & Align (2x)
REMOTE MOUNTING OF TURBINE
PIPING & WIRING UNDER FLOOR & NO ACCESS UNDER BATH
WARNINGS
• If necessary adjust length of the flexible overflow piping connected to the overflow.
• Adjust length on the straight part of the brass overflow pipe (G) to fit with the drain position that varies with different bath models.
Flexible Overflow Piping (Factory installed)
J
I
H
C
BE
GE D
F
A. STANDARD PARTS - PLUMBING
DESCRIPTION QTY
A Plated drain clicker 1
B Rubber seal 1
C Brass drain shoe 1
D Nylon conic shaped seal for drain 1
E Brass nut 2
F 4 in. brass tailpiece 1
G Brass overflow to drain pipe 1
H Nylon flat seal with flange 1
I 1-1/2 in. male threaded adaptor 1
J 1-1/2 overflow male-to-male connector 1
K Floor anchor 2
K
WARNINGUse the 6 in. (15 cm) tail piece supplied with Island Tub Drain®
Island Tub Drain
22
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED
2 TURBINE & GEYSAIR INSTALLATION (FOR THERMOMASSEUR®)
WARNINGS
• Access to Geysair® backflow preventer is necessary for cleaning of the filter.
• Baths from Nokori® collection cannot be drilled for faucet installation. Faucets must be freestanding or wall-mounted models.
• Geysair component cannot be remote mounted. It must stay at original position, attached to bath. Must never be unplugged.
3 ELECTRICAL WIRING OF OPTIONAL COMPONENTS
TURBINE REMOTE MOUNTING
See Step 7 page 14
TURBINE REMOTE of CONTROL MODULES
See Step 8 page 15
Geysair Hose and Back Flow Preventer
Hot Water Supply
REMOTE MOUNTING OF TURBINE
PIPING & WIRING UNDER FLOOR & NO ACCESS UNDER BATH
1- 1/2 I.D. PVC Air Intake Pipe(“TIGERFLEX®” FLEXIBLE PVC)
1- 1/2 I.D. ABS, PVC PIPE (Rigid or “TIGERFLEX®”) and Fittings (not included)
23 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED
WARNINGS
• Be sure the floor is leveled. Use shims as needed.
• Do not remove the protective plastic film on the tub and place a drop-cloth in the tub during installation to protect the acrylic.
• The tub must be securely anchored to floor.
• Apply a bead of silicone around the perimeter of the bath once on the floor.
4 BATH INSTALLATION
HELPFUL TIPS:
• Carefully place the tub on its side, on a blanket or a corrugated cardboard.
• To easily manipulate the bathtub in a safe way during installation, we recommend using moving straps.
Measure & Align (2x)
REMOTE MOUNTING OF TURBINE
PIPING & WIRING UNDER FLOOR & NO ACCESS UNDER BATH
24
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
REMOTE MOUNTING OF TURBINE
PIPING & WIRING UNDER FLOOR & NO ACCESS UNDER BATH
Island Tub Drain
WARNINGS
• Be sure the floor is leveled. Use shims as needed.
• Do not remove the protective plastic film on the tub and place a drop-cloth in the tub during installation to protect the acrylic.
• The tub must be securely anchored to floor.
• Apply a bead of silicone around the perimeter of the bath once on the floor.
4 BATH INSTALLATION
HELPFUL TIPS:
• Carefully place the tub on its side, on a blanket or a corrugated cardboard.
• To easily manipulate the bathtub in a safe way during installation, we recommend using moving straps.
Measure & Align (2x)
25 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED
4 BATH INSTALLATION
DRAIN CONNECTION WITH ISLAND TUB DRAIN® (ITD) – INFORMATION
WARNING
• Refer to supplied instructions for ISLAND TUB DRAIN® installation.
ISLAND TUB DRAIN®
Floor surface
REMOTE MOUNTING OF TURBINE
PIPING & WIRING UNDER FLOOR & NO ACCESS UNDER BATH
WARNING
Use the 6 in. (15 cm) tail piece supplied with Island Tub Drain®
26
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED
5 ELECTRONIC CONTROL INSTALLATION – MIAPLUS® & MIAMULTI® (OPTIONAL) .............................................12
5 ELECTRONIC CONTROL INSTALLATION – DOT .............................................................................................12
6 REMOTE MOUNTING OF TURBINE ..............................................................................................................13
7 REMOTE MOUNTING OF TURBINE – AIR PIPE (THERMOMASSEUR®) ..............................................................14
7 REMOTE MOUNTING OF TURBINE – ELECTRICAL CONNECTIONS (THERMOMASSEUR®) ................................14
8 REMOTE MOUNTING OF TURBINE – ELECTRICAL CONNECTIONS OF OPTIONAL THERAPIES .........................15
8 REMOTE MOUNTING OF OPTIONAL THERAPIES (TUB ONLY) – ELECTRICAL CONNECTIONS ..........................16
ELECTRICAL DIAGRAM – THERMOMASSEUR ................................................................................................17
ELECTRICAL DIAGRAM – THERAPIES ...........................................................................................................18
FOR NEXT STEPS SEE SECTION:
INSTALLATION – REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
REMOTE MOUNTING OF TURBINE
PIPING & WIRING UNDER FLOOR & NO ACCESS UNDER BATH
27 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED
PLEASE FOLLOW THESE INSTRUCTIONS IF YOU HAVE NO POSSIBILITY TO RUN AIR PIPES AND ELECTRICAL WIRING UNDER THE FLOOR.
1 PLUMBING – FLOOR LAYOUT FOR PIPES AND ACCESS .................................................................................19
1 PLUMBING .................................................................................................................................................20
2 TURBINE & GEYSAIR INSTALLATION (FOR THERMOMASSEUR®) ....................................................................22
WARNING
IF THE AIR PIPING CONNECTIONS AND POWER SUPPLY OF THERAPEUTIC OPTIONS HAVE TO BE AT FLOOR LEVEL, YOU MUST MAKE AN OPENING ON ONE SIDE OF THE BATH, AS CLOSE AS POSSIBLE TO TURBINE AND CONTROLS.
Drill
Jig saw with fine cut blade
Hole Saw
TOOLS REQUIRED
FOR NEXT STEPS, SEE SECTION: INSTALLATION – REMOTE MOUNTING
OF TURBINE, PIPING UNDER FLOOR, WITH NO ACCESS UNDER BATH
REMOTE MOUNTING OF TURBINE
PIPING & WIRING ABOVE FLOOR & NO ACCESS UNDER BATH
28
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED
2 TURBINE & GEYSAIR INSTALLATION (FOR THERMOMASSEUR®)
PASSAGE FOR THE AIR INLET PIPE AND ELECTRICAL WIRING OF OPTIONAL THERAPIES
2.0000
3.0000
3.0000minimum
2.0000minimum
1.5000
2.5000
2.2500minimum
3.2500minimum
R0.2500Ø0.5000
CUTTING AREA FOR AIR PIPE AND WIRES • Air pipe
• GEYSAIR
• Electrical wiring (optional therapies)
CUTTING AREA FOR AIR PIPE AND WIRES
SERVICING ACCESS HATCH FOR PIPES AND ELECTRICAL WIRING
CUTTING AREA FOR AIR PIPE AND WIRES
FRONT VIEW END VIEW
HOLE – LOCATION & MINIMUM DIMENSIONS
REMOTE MOUNTING OF TURBINE
PIPING & WIRING ABOVE FLOOR & NO ACCESS UNDER BATH
29 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
2 TURBINE & GEYSAIR INSTALLATION (FOR THERMOMASSEUR®)
PASSAGE FOR THE AIR INLET PIPE AND ELECTRICAL WIRING OF OPTIONAL THERAPIES
REMOTE MOUNTING OF TURBINE
PIPING & WIRING ABOVE FLOOR & NO ACCESS UNDER BATH
• Air pipe*
• GEYSAIR*
• Electrical wiring* (optional therapies)
(*): LOCATION SHOWN AS AN EXAMPLE MAY DIFFER ACCORDING TO THE POSITION OF REMOTE COMPONENTS AND LOCATION OF BATH. SEE PAGE 21 FOR INSTALLATION OF ISLAND TUB DRAIN® (ITD)
HELPFUL TIP:
To easily manipulate the bathtub in a safe way during installation, we recommend using moving straps.
WARNINGS
• Do not remove the protective plastic film on the bathtub and place a drop-cloth in the bath during installation to protect the acrylic.
• The bath must be securely anchored to floor.
• Apply a bead of silicone around the perimeter of the bath once on the floor.
30
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED
• Air pipe*
• GEYSAIR*
• Electrical wiring* (optional therapies)
ISLAND TUB DRAIN® (ITD)
(*): LOCATION SHOWN AS AN EXAMPLE MAY DIFFER ACCORDING TO THE POSITION OF REMOTE COMPONENTS AND LOCATION OF BATH. SEE PAGE 21 FOR INSTALLATION OF ISLAND TUB DRAIN®(ITD)
HELPFUL TIP:
To easily manipulate the bathtub in a safe way during installation, we recommend using moving straps.
WARNINGS
• Do not remove the protective plastic film on the bathtub and place a drop-cloth in the bath during installation to protect the acrylic.
• The bath must be securely anchored to floor.
• Apply a bead of silicone around the perimeter of the bath once on the floor.
FOR NEXT STEPS, FOLLOW INSTRUCTIONS: INSTALLATION – REMOTE MOUNTING OF TURBINE,
PIPING UNDER FLOOR WITH NO ACCESS UNDER BATH
3 ELECTRICAL WIRING OF OPTIONAL COMPONENTS .....................................................................................22
4 BATH INSTALLATION ...................................................................................................................................... 23
REMOTE MOUNTING OF TURBINE
PIPING & WIRING ABOVE FLOOR & NO ACCESS UNDER BATH
31 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED
5 ELECTRONIC CONTROL INSTALLATION – MIAPLUS® & MIAMULTI® (OPTIONAL) .............................................12
5 ELECTRONIC CONTROL INSTALLATION – DOT (THERAPIES) .........................................................................12
6 REMOTE MOUNTING OF TURBINE ..............................................................................................................13
7 REMOTE MOUNTING OF TURBINE – AIR PIPE (THERMOMASSEUR®) .............................................................14
7 REMOTE MOUNTING OF TURBINE – ELECTRICAL CONNECTIONS (THERMOMASSEUR®) ................................14
8 REMOTE MOUNTING OF TURBINE – ELECTRICAL CONNECTIONS OF OPTIONAL THERAPIES .........................15
8 REMOTE MOUNTING OF OPTIONAL THERAPIES (TUB ONLY) – ELECTRICAL CONNECTIONS ..........................16
ELECTRICAL DIAGRAM – THERMOMASSEUR ................................................................................................17
ELECTRICAL DIAGRAM – THERAPIES ...........................................................................................................18
FOR NEXT STEPS SEE SECTION:
INSTALLATION – REMOTE MOUNTING OF TURBINE WITH ACCESS UNDER BATH
REMOTE MOUNTING OF TURBINE
PIPING & WIRING ABOVE FLOOR & NO ACCESS UNDER BATH
32
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED TURBINE FACTORY INSTALLED WITH ACCESS UNDER BATH
1 PLUMBING – FLOOR LAYOUT FOR PIPES AND ACCESS
DIMENSIONS (IN.) A B C D E F
NOKORI 5827 58’’ 27’’ 10’’ 21’’ 95/8’’ 21/4’’
NOKORI 6331 63’’ 31’’ 101/2’’ 23’’ 10’’ 11/2’’
NOKORI 6429 64’’ 29’’ 10’’ 23’’ 95/8’’ 21/4’’
DIMENSIONS (IN.) A B C D
NOKORI 6935 69’’ 35’’ 101/4’’ 28’’
NOKORI 7131 701/2’’ 31’’ 121/4’’ 24’’
Access zone for drain
Access zone for drain
Recommended zone for optional components
Recommended zone for optional components
NOTE: Detailed plan is provided in the Documentation / Installation User Guides section of Nokori bath models on our Web site bainultra.com.
33 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
Measure & Align (2x)
TURBINE FACTORY INSTALLED WITH ACCESS UNDER BATH
1 PLUMBING
HELPFUL TIP: Carefully place the tub on its side, on a blanket or a corrugated cardboard.
WARNINGS
• If necessary adjust length of the flexible overflow piping connected to the overflow.
• Adjust length on the straight part of the brass overflow pipe (G) to fit with the drain position that varies with different bath models.
Flexible Overflow Piping (Factory installed)
J
I
H
C
BE
GE D
F
A. STANDARD PARTS - PLUMBING
DESCRIPTION QTY
A Plated drain clicker 1
B Rubber seal 1
C Brass drain shoe 1
D Nylon conic shaped seal for drain 1
E Brass nut 2
F 4 in. brass tailpiece 1
G Brass overflow to drain pipe 1
H Nylon flat seal with flange 1
I 1-1/2 in. male threaded adaptor 1
J 1-1/2 overflow male-to-male connector 1
K Floor anchor 2
K
34
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
TURBINE FACTORY INSTALLED WITH ACCESS UNDER BATH
2 AIR VENT OPENING (See page 4)
WARNING
• AN AIR VENT OF A MINIMUM OF 8 SQUARE INCHES IS REQUIRED TO HAVE AIR ENTRY AND GOOD VENTILATION FOR THE TURBINE. SINCE THE TUR-BINE IS MOUNTED ON THE BATH, YOU MUST MAKE AN OPENING ON ONE SIDE OF THE BATH.
Silicone
Drill
Jig saw with fine cut blade
TOOLS REQUIRED
HELPFUL TIP:
• IF INSTALLATION IS FOR TURBINE FACTORY INSTALLED WITH PIPING ABOVE FLOOR AND NO ACCESS UNDER BATH, THE AIR VENT CAN BE USED FOR GEYSAIR HOSE AND ELECTRICAL WIRES.
OPTIONAL PART – THERMOMASSEUR®
Air vent
35 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED
2 AIR VENT OPENING – CUTTING TEMPLATE OF WALL OF BATH
OPENINGS – POSSIBLE LOCATIONS
1 OPPOSITE SIDE OF BACKREST
2 LEFT HAND SIDE
3 RIGHT HAND SIDE
4 SIDE OF BACKREST
WARNING
• A FULL SCALE CUTTING TEMPLATE IS AVAILABLE at PAGE 48 OF THIS MANUAL.
LOCATION #2 – DETAIL (LOCATION #3 INVERTED)
LOCATION #1 & 4 – DETAIL
2 AIR VENT OPENING – POSSIBLE LOCATIONS
1
42
3
ø 1/4”
115/16”
21/2”
11/16”
TURBINE FACTORY INSTALLED WITH ACCESS UNDER BATH
CL
115/16”
2”
3”11/16”
36
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED
2 AIR VENT OPENING – INSTALLATION
Geysair Hose and Back Flow Preventer
Hot Water Supply
Geysair
Turbine (ThermoMasseur®)
1 Apply a bead of silicone all around the backside of the air vent.
2 Place the air vent directly over opening on bath and apply pressure against the air vent to spread the silicone evenly.
3 Adjust and level the air vent in place and secure temporarily with a tape for about 24h.
1
2 3
STEPS
TURBINE FACTORY INSTALLED WITH ACCESS UNDER BATH
3 ELECTRICAL WIRING OF TURBINE AND GEYSAIR® (THERMOMASSEUR®)
WARNINGS
• Access to Geysair® backflow preventer is necessary for cleaning of the filter.
• Geysair component cannot be remote mounted. It must stay at original position, attached to bath. Must never be unplugged.
37 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
PARTS AND TOOLS REQUIRED TURBINE FACTORY INSTALLED WITH ACCESS UNDER BATH
4 ELECTRONIC CONTROL INSTALLATION – MIAPLUS® & MIAMULTI® (OPTIONAL) LOCATION
4 ELECTRONIC CONTROL INSTALLATION – DOT
Jig saw with fine cut blade
Drill
1/4 in. drill bit
Push wiring through drilled holes.
Remove protective film from watertight seal.
Secure to the wall with permanent waterproof sealant (mold-free clear silicone for bathrooms).
Secure temporarily with a tape for about 24 h.
Push wiring through drilled holes.
Remove protective film from watertight seal.
Secure to the wall with permanent waterproof sealant (mold-free clear silicone for bathrooms).
Secure temporarily with a tape for about 24 h.
TOOLS REQUIRED
TOUCH PAD INSTALLATION
TOUCH PAD INSTALLATION
LOCATION: Determine the most convenient location, on the wall close to tub. Peel off the protective film of sticker behind the control. You can add a silicone bead to secure to the wall.
WARNINGS
• Baths from Nokori® collection cannot be drilled for faucet installation. Faucets must be freestanding or wall-mounted model
• DRILLING OF WALL: Refer to the Cutting Template on page 48 for the location and diameter of the holes.
WARNING
• If the control is not factory installed, you will find it attached to the turbine, or to the electronic control modules.
7/8 in. Hole saw
Drill
TOOLS REQUIRED
DOT WarmTouchShell® (WTS)
DOT Chromatherapy (LED)
38
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
5 TURBINE FACTORY INSTALLED – ELECTRICAL CONNECTIONS (THERMOMASSEUR®)
TURBINE FACTORY INSTALLED WITH ACCESS UNDER BATH
A: TURBINE
B: WARMTOUCHSHELL®
C: CHROMATHERAPY (LED lights)
D: MIAPLUS®
E: MIAMULTI® (OPTION)
TO GFCI Outlet United States
TO GFCI Outlet United States
EDBC
A
Junction box Canada
Junction box Canada
Geysair
WARNINGS
• Electrical outlet must be installed by a certified electrician.
• Installation must be conducted in accordance with all local, provincial/state, and federal building/electrical codes and regulation.
• Connect electrical supply only after all low voltage wiring is properly installed on turbine.
• If you did not follow this last step, shut off and then restart your home’s circuit breaker.
• Turbine and air pipe should be clear of building materials and wiring (See page 15 for electrical diagram).
ELECTRICAL DIAGRAM – THERMOMASSEUR ................................................................................................17
ELECTRICAL DIAGRAM – THERAPIES ...........................................................................................................18
39 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
nTURBINE FACTORY INSTALLED WITH ACCESS UNDER BATH
WARNINGS
• Be sure the floor is leveled. Use shims as needed.
• Do not remove the protective plastic film on the tub and place a drop-cloth in the tub during installation to protect the acrylic.
• The tub must be securely anchored to floor.
• Apply a bead of silicone around the perimeter of the bath once on the floor.
6 BATH INSTALLATION
HELPFUL TIPS:
• Carefully place the tub on its side, on a blanket or a corrugated cardboard.
• To easily manipulate the bathtub in a safe way during installation, we recommend using moving straps.
Floor surface
11/4“ Maximum
Measure & Align (2x)
40
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED TURBINE FACTORY INSTALLED
WIRING UNDER FLOOR & NO ACCESS UNDER BATH
1 PLUMBING – FLOOR LAYOUT FOR PIPES AND ACCESS
DIMENSIONS (IN.) A B C D
NOKORI 5827 58’’ 27’’ 95/8’’ 21’’
NOKORI 6331 63’’ 31’’ 10’’ 23’’
NOKORI 6429 64’’ 29’’ 95/8’’ 23’’
DIMENSIONS (IN.) A B C
NOKORI 6935 69’’ 35’’ 28’’
NOKORI 7131 70-1/2’’ 31’’ 24’’
Opening for Island Tub Drain
Opening for Island Tub Drain
Recommended zones for optional components
Recommended zone for optional components
NOTE: Detailed plan is provided in the Documentation / Installation User Guides section of Nokori bath models on our Web site bainultra.com.
41 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
WARNING
• Refer to supplied instructions for Island Tub Drain installation.
1 PLUMBING
HELPFUL TIP: Carefully place the tub on its side, on a blanket or a corrugated cardboard.
Measure & Align (2x)Island Tub Drain
TURBINE FACTORY INSTALLED
WIRING UNDER FLOOR & NO ACCESS UNDER BATH
WARNINGS
• If necessary adjust length of the flexible overflow piping connected to the overflow.
• Adjust length on the straight part of the brass overflow pipe (G) to fit with the drain position that varies with different bath models.
Flexible Overflow Piping (Factory installed)
J
I
H
C
BE
GE D
F
A. STANDARD PARTS - PLUMBING
DESCRIPTION QTY
A Plated drain clicker 1
B Rubber seal 1
C Brass drain shoe 1
D Nylon conic shaped seal for drain 1
E Brass nut 2
F 4 in. brass tailpiece 1
G Brass overflow to drain pipe 1
H Nylon flat seal with flange 1
I 1-1/2 in. male threaded adaptor 1
J 1-1/2 overflow male-to-male connector 1
K Floor anchor 2
K
WARNINGUse the 6 in. (15 cm) tail piece supplied with Island Tub Drain®
42
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
Measure & Align (2x)
TURBINE FACTORY INSTALLED
WIRING UNDER FLOOR & NO ACCESS UNDER BATH
FOR NEXT STEPS FOLLOW THE INSTRUCTIONS:
TURBINE FACTORY INSTALLED WITH ACCESS UNDER BATH
2 AIR VENT OPENING ...................................................................................................................................34
3 ELECTRICAL WIRING OF TURBINE AND GEYSAIR® (THERMOMASSEUR®) .......................................................36
4 ELECTRONIC CONTROL INSTALLATION – MIAPLUS® & MIAMULTI® (OPTIONAL) .............................................37
4 ELECTRONIC CONTROL INSTALLATION – DOT .............................................................................................37
5 TURBINE FACTORY INSTALLED – ELECTRICAL CONNECTIONS (THERMOMASSEUR®) ......................................38
ELECTRICAL DIAGRAM – THERMOMASSEUR ................................................................................................17
ELECTRICAL DIAGRAM – THERAPIES ...........................................................................................................18
6 BATH INSTALLATION
HELPFUL TIPS:
• Carefully place the tub on its side, on a blanket or a corrugated cardboard.
• To easily manipulate the bathtub in a safe way during installation, we recommend using moving straps.
WARNINGS
• Be sure the floor is leveled. Use shims as needed.
• Do not remove the protective plastic film on the tub and place a drop-cloth in the tub during installation to protect the acrylic.
• The tub must be securely anchored to floor.
• Apply a bead of silicone around the perimeter of the bath once on the floor.
43 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
TURBINE FACTORY INSTALLED
WIRING UNDER FLOOR & NO ACCESS UNDER BATH
6 BATH INSTALLATION
WARNING
• Refer to supplied instructions for ISLAND TUB DRAIN® installation.
ISLAND TUB DRAIN®
Floor surface
WARNING
Use the 6 in. (15 cm) tail piece supplied with Island Tub Drain®
WARNINGS
• Be sure the floor is leveled. Use shims as needed.
• Do not remove the protective plastic film on the tub and place a drop-cloth in the tub during installation to protect the acrylic.
• The tub must be securely anchored to floor.
• Apply a bead of silicone around the perimeter of the bath once on the floor.
DRAIN CONNECTION WITH
ISLAND TUB DRAIN® (ITD) – INFORMATION
44
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
PARTS AND TOOLS REQUIRED
FOR NEXT STEPS FOLLOW THE INSTRUCTIONS: TURBINE FACTORY INSTALLED WITH WIRING UNDER FLOOR AND NO ACCESS UNDER BATH
1 PLUMBING – FLOOR LAYOUT FOR PIPES AND ACCESS .................................................................................40
1 PLUMBING .................................................................................................................................................41
2 AIR VENT OPENING ...................................................................................................................................34
3 ELECTRICAL WIRING OF TURBINE AND GEYSAIR® (THERMOMASSEUR®)
TURBINE FACTORY INSTALLED
WIRING ABOVE FLOOR & NO ACCESS UNDER BATH
WARNING
• IF THE POWER SUPPLY OF THERAPEUTIC OPTIONS MUST BE ABOVE THE FLOOR, YOU MIGHT HAVE TO MAKE AN ADDITIONAL OPENING ON ONE SIDE OF THE BATH, AS CLOSE AS POSSIBLE TO TURBINE AND CONTROLS.
Drill
Jig saw with fine cut blade
TOOLS REQUIRED
HELPFUL TIP:
• IF INSTALLATION IS FOR TURBINE FACTORY IN-STALLED WITH WIRING ABOVE FLOOR AND NO POSSIBLE ACCESS UNDER BATH, THE AIR VENT OPENING CAN ALSO BE USED FOR PASSAGE OF GEYSAIR HOSE AND ELECTRICAL WIRES.
45 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
3 TURBINE & GEYSAIR INSTALLATION (FOR THERMOMASSEUR®)
PASSAGE FOR THE ELECTRICAL WIRING OF OPTIONAL THERAPIES
2.0000
3.0000
3.0000minimum
2.0000minimum
1.5000
2.5000
2.2500minimum
3.2500minimum
R0.2500Ø0.5000
CUTTING AREA FOR WIRES • GEYSAIR
• Electrical wiring (optional therapies)
CUTTING AREA FOR WIRES
SERVICING ACCESS HATCH FOR PIPES AND ELECTRICAL WIRING
CUTTING AREA FOR AIR PIPE AND WIRES
FRONT VIEW END VIEW
HOLE – LOCATION & MINIMUM DIMENSIONS
TURBINE FACTORY INSTALLED
WIRING ABOVE FLOOR & NO ACCESS UNDER BATH
46
NO
KO
RI
- in
sta
lla
tio
n
NOKORI® BATH
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
4 ELECTRONIC CONTROL INSTALLATION – MIAPLUS® & MIAMULTI® (OPTIONAL) .............................................37
4 ELECTRONIC CONTROL INSTALLATION – DOT .............................................................................................37
5 TURBINE MOUNTED ON BATH – ELECTRICAL CONNECTIONS (THERMOMASSEUR®) ......................................38
ELECTRICAL DIAGRAM – THERMOMASSEUR ................................................................................................17
ELECTRICAL DIAGRAM – THERAPIES ...........................................................................................................18
6 BATH INSTALLATION ..................................................................................................................................42
FOR NEXT STEPS FOLLOW THE INSTRUCTIONS: TURBINE FACTORY INSTALLED WITH ACCESS UNDER BATH
FOR NEXT STEPS FOLLOW THE INSTRUCTIONS: TURBINE FACTORY INSTALLED WITH WIRING UNDER FLOOR AND NO ACCESS UNDER BATH
TURBINE FACTORY INSTALLED
WIRING ABOVE FLOOR & NO ACCESS UNDER BATH
47 www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
NOKORI® BATH
INSTALLATION INSTRUCTIONS
NO
KO
RI
- in
sta
lla
tio
n
TILE FLANGE
When installing the bath against one, two or three walls, a tile flange can be helpful to have the perfect finish to the installa-tion. A tile flange, not factory installed, can be ordered with a Nokori® bath.
INSTALLATION OF A TILE FLANGE
INSTALLATION
1 Cut a 45° angle with the help of the miter box
2 Adjust the length at both ends and cut straight
3 Peel off the film of the double sided tape.
4 Set the tile flange on the edge of bath and square against the wall
5 Apply a waterproof sealant at the corners of the tile flange
Miter box
Finishing saw
TOOLS REQUIRED
2 2
2
3
1
5
45°
BATH INSTALLED AGAINST 1, 2, OR 3 WALLS
1 5
CU
TT
ING
TE
MP
LA
TE
S /
GA
BA
RIT
S D
E P
ER
ÇA
GE
NOKORI®
CUTTING TEMPLATES / GABARITS DE PERÇAGE
NOKORI®
CUTTING TEMPLATES / GABARITS DE PERÇAGE
www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.Certains produits, spécifications et services mentionnés dans le présent manuel sont décrits dans des demandes de brevets en instance ou protégés par des brevets.
1 800 463.2187 Monday to Thursday from 8 a.m. to 8 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST)
Du lundi au jeudi, De 8 h à 20 h (HE) . Vendredi de 8 h à 17 h (HE) Printed in Canada. Copyright © April 2017 BainUltra Inc. All rights reserved. 45200618
Imprimé au Canada. Copyright © avril 2017 BainUltra inc. Tous droits réservés.
11.313"[28.7 cm]
1.063"[2.7 cm]
R0.125"[R0.3 cm]
0.813"[2.1 cm]
11.063"[28.1 cm]
1.625"[4.1 cm]
1.125"[2.9 cm]
1.375" [3.5 cm]
0.875"[2.2 cm]
R0.125"[R0.3 cm]
1.625"±0.04"[4.1 cm±0.1 cm]
5.125"±0.04"[13.0 cm±0.1 cm]
R0.250"[R0.6 cm]5.591" [14.2 cm]
Control cut-outTrou du contrôle
Control outlineContour du contrôle
2.165"[5.5 cm]
AIR INTAKE - OPENING
PRISE D'AIR - OUVERTURE
MIAPLUS & MIAMULTI
Trou pour infrarouge MiaMulti®Cut-out for MiaMulti® infrared
11.313"[28.7 cm]
1.063"[2.7 cm]
R0.125"[R0.3 cm]
0.813"[2.1 cm]
11.063"[28.1 cm]
1.625"[4.1 cm]
1.125"[2.9 cm]
1.375" [3.5 cm]
0.875"[2.2 cm]
R0.125"[R0.3 cm]
1.625"±0.04"[4.1 cm±0.1 cm]
5.125"±0.04"[13.0 cm±0.1 cm]
R0.250"[R0.6 cm]5.591" [14.2 cm]
Control cut-outTrou du contrôle
Control outlineContour du contrôle
2.165"[5.5 cm]
AIR INTAKE - OPENING
PRISE D'AIR - OUVERTURE
MIAPLUS & MIAMULTI
Trou pour infrarouge MiaMulti®Cut-out for MiaMulti® infrared
Print scale 100% / Imprimer à 100%
Print scale 100% / Imprimer à 100%
48
11.313"[28.7 cm]
1.063"[2.7 cm]
R0.125"[R0.3 cm]
0.813"[2.1 cm]
11.063"[28.1 cm]
1.625"[4.1 cm]
1.125"[2.9 cm]
1.375" [3.5 cm]
0.875"[2.2 cm]
R0.125"[R0.3 cm]
1.625"±0.04"[4.1 cm±0.1 cm]
5.125"±0.04"[13.0 cm±0.1 cm]
R0.250"[R0.6 cm]5.591" [14.2 cm]
Control cut-outTrou du contrôle
Control outlineContour du contrôle
2.165"[5.5 cm]
AIR INTAKE - OPENING
PRISE D'AIR - OUVERTURE
MIAPLUS & MIAMULTI
Trou pour infrarouge MiaMulti®Cut-out for MiaMulti® infrared
Print scale 100% / Imprimer à 100%