installation guide myvi
DESCRIPTION
jgn lupa install aircon filter...kalo x brk padahnyeTRANSCRIPT
This is the picture of your Myvi drawer
DURATECH
With 2 finger pull to the left in order to let the hook off from the drawer
The Hook
DURATECH
With 2 finger again, pull to your right this time to unhook.
DURATECH
Once everything complete, the drawer will fall down so please hold up your Drawer and a position of 90 degree, just drag the drawer. It will come off Completely.
DURATECH
This is the blower you can see once is open up.
DURATECH
This is the plastic panel that most seller are talking about. It just a plastic panel and serve no function. A truly bracket is the one that hold cabin filter!!
Hold the cabin filter in this position as you can see a curve edge at the filter.This is the correct position. Next I’ll guide you to glide in your filter.
DURATECH
As you can see the cabin filter is on top of your blower which all you need Is some effort to slide it in.
DURATECH
This is the exact position of cabin filter once is completed. As you can see theBlower area is ready for this cabin filter. If you fitted correctly, the cabin filterWill sit in tightly.
DURATECH
A view from top of dashboard for non air-bag version model. Please Reverse the same procedure to fix everything back in order.
DURATECH
This is some example of our blower which operate without any cabin filter For only 15 000km. So can you imagine the cooling coils conditions??
DURATECH