installation guide - dassault systèmes...your icem surf student edition 2020 license (k49-stu)...
TRANSCRIPT
-
ICEM Surf Student Edition Installation Guide
Version 2.0 - 9/14/2020
Written by: M.Blair/A.Teuber
3D
S.C
OM
/CA
TIA
© D
assa
ult S
ystè
me
s | C
onfid
en
tia
l In
form
ation
| 0
9/2
3/2
0 | r
ef.
: 3
DS
_D
ocu
me
nt_
20
20
-
2
Table of contents 1. Notice ................................................................................................................................. 3
2. ICEM Surf Student Software ............................................................................................... 3
2.1. Download ICEM Surf Student Edition .............................................................................. 3
2.2. Included ICEM Surf products within ICEM Surf Student .................................................. 3
2.3. End User Agreement ....................................................................................................... 4
3. System requirements .......................................................................................................... 5
3.1. Supported platforms and operating system versions ....................................................... 5
3.2. Harddisk memory requirements for the installation .......................................................... 5
3.3. Minimum requirements for the graphics configuration ...................................................... 5
3.4. Memory requirements for RAM and swap space ............................................................. 5
3.5. DSLS version .................................................................................................................. 6
4. Installation and Setup procedure ......................................................................................... 6
4.1. Download and unzip the zip files ..................................................................................... 6
4.2. Welcome screen .............................................................................................................. 7
4.3. Installation Directory ........................................................................................................ 7
4.4. Online Manual ................................................................................................................. 8
4.5. Short Cut Preferences ..................................................................................................... 8
4.6. Begin Installation ............................................................................................................. 9
4.7. Installation in progress ..................................................................................................... 9
4.8. Troubleshooting ..............................................................................................................10
5. DSLS Licensing for ICEM Surf Student ..............................................................................11
5.1. How to import the license key received by email ............................................................11
6. Running ICEM Surf Student Edition 2020 ..........................................................................12
-
3
1. Notice This guide has been written by the Dassault Systèmes Education Department to help
students order and install ICEM Surf Student Edition.
2. ICEM Surf Student Software
2.1. Download ICEM Surf Student Edition
ICEM Surf 2020 Student software can be downloaded from the following location:
http://edu.3ds.com/en/get-software
2.2. Included ICEM Surf products within ICEM Surf Student
ICEM Surf Professional: Often described as the reference system for the creation of
Class-A surfaces, ICEM Surf Professional is the base module for the creation and
modification of demanding free-form surfaces. In a very short time you can model
components with surfaces that are doubly curved and smooth at the same time. Unique
construction and modelling tools with integrated real-time diagnosis rapidly lead you to
the desired results.
ICEM Surf Master: focuses on global filleting, Overcrowning, Feature Design and
global connections of surfaces. With Feature Design for example, static pre-defined
form changes can be applied globally to complete models in one operation, while all
surface structures, connections and design features are maintained.
ICEM Surf Magic: provides additional tools for surface construction, and makes global
dynamic design and modelling of complex surface models possible.
ICEM Surf’s Realtime Rendering: provides an advanced set of rendering tools that
allow the designer to generate a photo-realistic representation of the CAD model
applying effects such as textures, transparency, shadows and reflections, set lighting
conditions that can control the ambient occlusion, lens flares and HDR lights
ICEM Surf Scan Modelling: allows the user to efficiently handle dense, ordered, or
random point clouds generated by automatic laser and photo digitisers. Tools are
provided to enable the designer to directly, locally or globally, model point clouds or
facet data used for automatic quick surface creation.
http://edu.3ds.com/en/get-software
-
4
ICEM Surf Advanced Tools: Offering advanced modeling capabilities such as
Accelerated Surfaces and to create (with the tube function) and diagnose car body
gaps. The levelling analysis function enables to check the homogeneity of a surface
area compared to a reference area. Advanced diagnosis functions for checking
unwanted flat areas in a surface model.
ICEM Surf Safety Analysis: developed primarily for safety studies in the automotive
industry.
2.3. End User Agreement
The Student License Agreement sets some usages for ICEM Surf Student Edition. In
particular:
You must install the software on a computer owned or/and leased by you [...]
identified in the order, placed by you by type, serial number, target ID and installation
address. (Article 1)
[You must be] a natural person (i) regularly enrolled as a student in an academic
program, (ii) holding a valid registration receipt for the current semester or a valid letter
of enrolment on school letterhead for the current year (iii) who is registered on 3DS
Academy. (Article 1)
ICEM Surf may only be operated by you, on your personal computer and only for your
individual, personal and non-commercial learning, academic and/or research purposes,
excluding any other purposes such as but without limitation any direct or indirect
industrial, commercial and/or business purposes. (Article 2)
-
5
3. System requirements
Here you will find information on system requirements for ICEM Surf 2020.
For the latest information on certified platforms and graphics cards please refer to our
homepage:
http://www.3ds.com/products-services/catia/products/icem-surf/supported-hardware/
3.1. Supported platforms and operating system versions
ICEM Surf 2020 supports Windows 10.
3.2. Harddisk memory requirements for the installation
Component Required harddisk memory
ICEM Surf and additional software products 600 MB
TIFF Library 475 MB
PDF Manuals 50 MB per language
HTML Online Manual 70 MB per language
3.3. Minimum requirements for the graphics configuration
OpenGL 3.2 or higher is required to benefit from all features of the
Realtime Renderer.
A screen resolution of 1600x1024 pixels is required at least. ICEM Surf
provides High DPI Support.
3.4. Memory requirements for RAM and swap space
ICEM Surf requires at least 8 GB Main Memory.
For processing large amount of data (e.g. scans) it will need considerably more
Main Memory.
The total amount of Main Memory + Swap Space must be approximately 8
times larger than the size of the data base/scan file to be used.
The memory in the ICEM Surf work directory must be at least twice the size of
the data base/scan file to be used.
http://www.3ds.com/products-services/catia/products/icem-surf/supported-hardware/
-
6
3.5. DSLS version
ICEM Surf 2020 requires minimum DSLS version R2020x. For further updates,
customers can obtain a download version from the Dassault Systemes server
http://www.3ds.com/support/.
4. Installation and Setup procedure
4.1. Download and unzip the zip files
Download the zip file in a temporary directory (C:\temp\ICEM Surf in our example).
NB: ICEM Surf Student Edition install package is composed of only one ZIP file.
Extract the zip file in the current folder. Then, double click:
ICEM_Surf_Student.AllOS\1\setup.exe
http://www.3ds.com/support/
-
7
4.2. Welcome screen
Select option: “ICEM Surf Student Edition”
Press “Next”
4.3. Installation Directory
Choose the directory where ICEM Surf Student Edition will be copied too.
Note: Around 500MB disk storage is necessary to install ICEM Surf Student
We recommend using the default location.
-
8
4.4. Online Manual
Optionally choose the Online Manual in the required language then press “Next”
4.5. Short Cut Preferences
Press “Next” for Short Cut preferences. (Default settings recommended)
-
9
4.6. Begin Installation
You are now ready to commence the installation: Select “Yes” to begin
4.7. Installation in progress
The installation of ICEM Surf Student will now take a few minutes. An information panel
will appear once complete.
Select “OK” to clear information window
Select “Next” to proceed to final panel
-
10
4.8. Troubleshooting
Installation is now complete: Select “Finish” to exit the Installer.
Should a problem occur during the installation procedure, this will be displayed in the window,
the details of the exact cause of the problem can be viewed under the “View Log” button.
-
11
5. DSLS Licensing for ICEM Surf Student
5.1. How to import the license key received by email
You will receive the license for ICEM Surf Student to the email address provided during
the registration process. Attached to the email received, will be a .LIC file.
Save the .LIC file to a directory of your choice.
From the Windows start menu or from your desktop, select Local License
Management for ICEM Surf Student Edition
-
12
From within the Local Key Management Tool that appears, select: File > Import
Locate and select the license (.LIC file) you previously saved from your email into the
directory you chose.
Your ICEM Surf Student Edition 2020 license (K49-STU) should appear in the list:
6. Running ICEM Surf Student Edition 2020
Double click on the desktop icon ICEM Surf Student Edition 2020.0 to launch ICEM Surf
Congratulations! You are now done and you may now shape your ideas in 3D.
Enjoy ICEM Surf!